Programs & Examples On #Openid

OpenID proves who you are.

OAuth grants access to the features provided by the authorizing party.

I installed the Role plugin under Jenkins-3.5, but it does not show the "Manage Roles" option under "Manage Jenkins", and when one follows the security install page from the wiki, all users are locked out instantly. I had to manually shutdown Jenkins on the server, restore the correct configuration settings (/me is happy to do proper backups) and restart Jenkins.

I didn't have high hopes, as that plugin was last updated in 2011

Use Java script to change action url dynamically Works for me well

function chgAction( action_name )
{

 {% for data in sidebar_menu_data %}

     if( action_name== "ABC"){ document.forms.action = "/ABC/";
     }
     else if( action_name== "XYZ"){ document.forms.action = "/XYZ/";
     }

}

<form name="forms" method="post" action="<put default url>" onSubmit="return checkForm(this);">{% csrf_token %} 

public string ReadPdfFile(object Filename, DataTable ReadLibray)
{
    PdfReader reader2 = new PdfReader((string)Filename);
    string strText = string.Empty;

    for (int page = 1; page <= reader2.NumberOfPages; page++)
    {
    ITextExtractionStrategy its = new iTextSharp.text.pdf.parser.SimpleTextExtractionStrategy();
    PdfReader reader = new PdfReader((string)Filename);
    String s = PdfTextExtractor.GetTextFromPage(reader, page, its);

    s = Encoding.UTF8.GetString(ASCIIEncoding.Convert(Encoding.Default, Encoding.UTF8, Encoding.Default.GetBytes(s)));
    strText = strText + s;
    reader.Close();
    }
    return strText;
}

Unless you need to access more memory that 32b addressing will allow you, the benefits will be small, if any.

When running on 64b CPU, you get the same memory interface no matter if you are running 32b or 64b code (you are using the same cache and same BUS).

While x64 architecture has a few more registers which allows easier optimizations, this is often counteracted by the fact pointers are now larger and using any structures with pointers results in a higher memory traffic. I would estimate the increase in the overall memory usage for a 64b application compared to a 32b one to be around 15-30 %.

The following shell script, perhaps?

#!/bin/sh
if [[ -e $1 ]]
then
  if [[ ! -d $2 ]]
  then
    mkdir --parents $2
  fi
fi
mv $1 $2

That's the basic part. You might want to add in a bit to check for arguments, and you may want the behavior to change if the destination exists, or the source directory exists, or doesn't exist (i.e. don't overwrite something that doesn't exist).

You can use SQLiteOpenHelper's onUpgrade method. In the onUpgrade method, you get the oldVersion as one of the parameters.

In the onUpgrade use a switch and in each of the cases use the version number to keep track of the current version of database.

It's best that you loop over from oldVersion to newVersion, incrementing version by 1 at a time and then upgrade the database step by step. This is very helpful when someone with database version 1 upgrades the app after a long time, to a version using database version 7 and the app starts crashing because of certain incompatible changes.

Then the updates in the database will be done step-wise, covering all possible cases, i.e. incorporating the changes in the database done for each new version and thereby preventing your application from crashing.

For example:

public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) {
    switch (oldVersion) {
    case 1:
        String sql = "ALTER TABLE " + TABLE_SECRET + " ADD COLUMN " + "name_of_column_to_be_added" + " INTEGER";
        db.execSQL(sql);
        break;

    case 2:
        String sql = "SOME_QUERY";
        db.execSQL(sql);
        break;
    }

}

attributes -> HTML

properties -> DOM

Using Bootstrap, the correct way is to use the offset class. Use math to determine the left offset. Example: You want a button full width on mobile, but 1/3 width and centered on tablet, desktop, large desktop.

So out of 12 "bootstrap" columns, you're using 4 to offset, 4 for the button, then 4 is blank to the right.

See if that works!

I am not very good in using sophisticated regular expressions, so I'd do such task in the following way:

files <- list.files()
dbf.files <- files[-grep(".xml", files, fixed=T)]

First line just lists all files from working dir. Second one drops everything containing ".xml" (grep returns indices of such strings in 'files' vector; subsetting with negative indices removes corresponding entries from vector). "fixed" argument for grep function is just my whim, as I usually want it to peform crude pattern matching without Perl-style fancy regexprs, which may cause surprise for me.

I'm aware that such solution simply reflects drawbacks in my education, but for a novice it may be useful =) at least it's easy.

You can catch it like any other exception:

try {
  foo();
}
catch (const std::bad_alloc&) {
  return -1;
}

Quite what you can usefully do from this point is up to you, but it's definitely feasible technically.

In general you cannot, and should not try, to respond to this error. bad_alloc indicates that a resource cannot be allocated because not enough memory is available. In most scenarios your program cannot hope to cope with that, and terminating soon is the only meaningful behaviour.

Worse, modern operating systems often over-allocate: on such systems, malloc and new can return a valid pointer even if there is not enough free memory left – std::bad_alloc will never be thrown, or is at least not a reliable sign of memory exhaustion. Instead, attempts to access the allocated memory will then result in a segmentation fault, which is not catchable (you can handle the segmentation fault signal, but you cannot resume the program afterwards).

The only thing you could do when catching std::bad_alloc is to perhaps log the error, and try to ensure a safe program termination by freeing outstanding resources (but this is done automatically in the normal course of stack unwinding after the error gets thrown if the program uses RAII appropriately).

In certain cases, the program may attempt to free some memory and try again, or use secondary memory (= disk) instead of RAM but these opportunities only exist in very specific scenarios with strict conditions:

1. The application must ensure that it runs on a system that does not overcommit memory, i.e. it signals failure upon allocation rather than later.
2. The application must be able to free memory immediately, without any further accidental allocations in the meantime.

It’s exceedingly rare that applications have control over point 1 — userspace applications never do, it’s a system-wide setting that requires root permissions to change.¹

OK, so let’s assume you’ve fixed point 1. What you can now do is for instance use a LRU cache for some of your data (probably some particularly large business objects that can be regenerated or reloaded on demand). Next, you need to put the actual logic that may fail into a function that supports retry — in other words, if it gets aborted, you can just relaunch it:

lru_cache<widget> widget_cache;

double perform_operation(int widget_id) {
    std::optional<widget> maybe_widget = widget_cache.find_by_id(widget_id);
    if (not maybe_widget) {
        maybe_widget = widget_cache.store(widget_id, load_widget_from_disk(widget_id));
    }
    return maybe_widget->frobnicate();
}

…

for (int num_attempts = 0; num_attempts < MAX_NUM_ATTEMPTS; ++num_attempts) {
    try {
        return perform_operation(widget_id);
    } catch (std::bad_alloc const&) {
        if (widget_cache.empty()) throw; // memory error elsewhere.
        widget_cache.remove_oldest();
    }
}

// Handle too many failed attempts here.

But even here, using std::set_new_handler instead of handling std::bad_alloc provides the same benefit and would be much simpler.

¹ If you’re creating an application that does control point 1, and you’re reading this answer, please shoot me an email, I’m genuinely curious about your circumstances.

What is the C++ Standard specified behavior of new in c++?

The usual notion is that if new operator cannot allocate dynamic memory of the requested size, then it should throw an exception of type std::bad_alloc.
However, something more happens even before a bad_alloc exception is thrown:

C++03 Section 3.7.4.1.3: says

An allocation function that fails to allocate storage can invoke the currently installed new_handler(18.4.2.2), if any. [Note: A program-supplied allocation function can obtain the address of the currently installed new_handler using the set_new_handler function (18.4.2.3).] If an allocation function declared with an empty exception-specification (15.4), throw(), fails to allocate storage, it shall return a null pointer. Any other allocation function that fails to allocate storage shall only indicate failure by throw-ing an exception of class std::bad_alloc (18.4.2.1) or a class derived from std::bad_alloc.

Consider the following code sample:

#include <iostream>
#include <cstdlib>

// function to call if operator new can't allocate enough memory or error arises
void outOfMemHandler()
{
    std::cerr << "Unable to satisfy request for memory\n";

    std::abort();
}

int main()
{
    //set the new_handler
    std::set_new_handler(outOfMemHandler);

    //Request huge memory size, that will cause ::operator new to fail
    int *pBigDataArray = new int[100000000L];

    return 0;
}

In the above example, operator new (most likely) will be unable to allocate space for 100,000,000 integers, and the function outOfMemHandler() will be called, and the program will abort after issuing an error message.

As seen here the default behavior of new operator when unable to fulfill a memory request, is to call the new-handler function repeatedly until it can find enough memory or there is no more new handlers. In the above example, unless we call std::abort(), outOfMemHandler() would be called repeatedly. Therefore, the handler should either ensure that the next allocation succeeds, or register another handler, or register no handler, or not return (i.e. terminate the program). If there is no new handler and the allocation fails, the operator will throw an exception.

What is the new_handler and set_new_handler?

new_handler is a typedef for a pointer to a function that takes and returns nothing, and set_new_handler is a function that takes and returns a new_handler.

Something like:

typedef void (*new_handler)();
new_handler set_new_handler(new_handler p) throw();

set_new_handler's parameter is a pointer to the function operator new should call if it can't allocate the requested memory. Its return value is a pointer to the previously registered handler function, or null if there was no previous handler.

How to handle out of memory conditions in C++?

Given the behavior of newa well designed user program should handle out of memory conditions by providing a proper new_handlerwhich does one of the following:

Make more memory available: This may allow the next memory allocation attempt inside operator new's loop to succeed. One way to implement this is to allocate a large block of memory at program start-up, then release it for use in the program the first time the new-handler is invoked.

Install a different new-handler: If the current new-handler can't make any more memory available, and of there is another new-handler that can, then the current new-handler can install the other new-handler in its place (by calling set_new_handler). The next time operator new calls the new-handler function, it will get the one most recently installed.

(A variation on this theme is for a new-handler to modify its own behavior, so the next time it's invoked, it does something different. One way to achieve this is to have the new-handler modify static, namespace-specific, or global data that affects the new-handler's behavior.)

Uninstall the new-handler: This is done by passing a null pointer to set_new_handler. With no new-handler installed, operator new will throw an exception ((convertible to) std::bad_alloc) when memory allocation is unsuccessful.

Throw an exception convertible to std::bad_alloc. Such exceptions are not be caught by operator new, but will propagate to the site originating the request for memory.

Not return: By calling abort or exit.

There are several ways to append a list to a Pandas Dataframe in Python. Let's consider the following dataframe and list:

import pandas as pd
# Dataframe
df = pd.DataFrame([[1, 2], [3, 4]], columns = ["col1", "col2"])
# List to append
list = [5, 6]

Option 1: append the list at the end of the dataframe with ?pandas.DataFrame.loc.

df.loc[len(df)] = list

Option 2: convert the list to dataframe and append with ?pandas.DataFrame.append().

df = df.append(pd.DataFrame([list], columns=df.columns), ignore_index=True)

Option 3: convert the list to series and append with ??pandas.DataFrame.append()?.

df = df.append(pd.Series(list, index = df.columns), ignore_index=True)

Each of the above options should output something like:

>>> print (df)
   col1  col2
0     1     2
1     3     4
2     5     6

Reference : How to append a list as a row to a Pandas DataFrame in Python?

The following will Return All Procedures in selected database

SELECT * FROM sys.procedures

Just use ob_start(); at the top of the page.

Look at ~/.myslgui/query-browser/history.xml here you can find the last queries made with mysql_query_browser (some days old)

This is an error that you see when your emulator has the "Use host GPU" setting checked. If you uncheck it then the error goes away. Of course, then your emulator is not as responsive anymore.

There is probably a more efficient solution to your question, but following formula should do the trick:

=SUM(COUNTIFS(J1:J196,"agree",A1:A196,"yes"),COUNTIFS(J1:J196,"agree",A1:A196,"no"))

Give this a try:

success: function(json) {
   console.log(JSON.stringify(json.topics));
   $.each(json.topics, function(idx, topic){
     $("#nav").html('<a href="' + topic.link_src + '">' + topic.link_text + "</a>");
   });
},

All you have to do is use the value attribute of input tags:

<input type="text" value="Your Value" />

Or, in the case of a textarea:

<textarea>Your Value</textarea>

Try setting both min-height and min-width, with display:block:

img {
    display:block;
    min-height:100%;
    min-width:100%;
}

(fiddle)

Provided your image's containing element is position:relative or position:absolute, the image will cover the container. However, it will not be centred.

You can easily centre the image if you know whether it will overflow horizontally (set margin-left:-50%) or vertically (set margin-top:-50%). It may be possible to use CSS media queries (and some mathematics) to figure that out.

Finally I reimported the project and it worked.

There you have it, null-safe invocation in Java 8:

public void someMethod() {
    String userName = nullIfAbsent(new Order(), t -> t.getAccount().getUser()
        .getName());
}

static <T, R> R nullIfAbsent(T t, Function<T, R> funct) {
    try {
        return funct.apply(t);
    } catch (NullPointerException e) {
        return null;
    }
}

Basically, flush() cleans out your RAM buffer, its real power is that it lets you continue to write to it afterwards - but it shouldn't be thought of as the best/safest write to file feature. It's flushing your RAM for more data to come, that is all. If you want to ensure data gets written to file safely then use close() instead.

If none of the other options works, then this could be an issue with the version of the JDK itself, just uninstall the current jdk and install the latest version.

I too faced this issue, after trying everything I upgraded to latest JDK, then this issue was resolved finally.

Assuming you can only have one 'something1' or 'something2', etc. per line, you can use a lookup table:

$lookupTable = @{
    'something1' = 'something1aa'
    'something2' = 'something2bb'
    'something3' = 'something3cc'
    'something4' = 'something4dd'
    'something5' = 'something5dsf'
    'something6' = 'something6dfsfds'
}

$original_file = 'path\filename.abc'
$destination_file =  'path\filename.abc.new'

Get-Content -Path $original_file | ForEach-Object {
    $line = $_

    $lookupTable.GetEnumerator() | ForEach-Object {
        if ($line -match $_.Key)
        {
            $line -replace $_.Key, $_.Value
            break
        }
    }
} | Set-Content -Path $destination_file

If you can have more than one of those, just remove the break in the if statement.

As I saw that in Android Studio 0.5.1, you have to close your project by doing simply File -> Close Project then move your mouse over the project which you want to delete then keep your mouse on the same project and press delete then click on "OK" button that would delete your project from Android Studio.

You should always write command after a Tab and not white space.

This applies to gcc line (line #4) in your case. You need to insert tab before gcc.

Also replace \rm -fr ll with rm -fr ll. Insert tabs before this command too.

Tim's method works perfectly for my case - selecting the text in a div for both IE and FF after I replaced the following statement:

range.moveToElementText(text);

with the following:

range.moveToElementText(el);

The text in the div is selected by clicking it with the following jQuery function:

$(function () {
    $("#divFoo").click(function () {
        selectElementText(document.getElementById("divFoo"));
    })
});

String text = "In early March, the city of Topeka, Kansas," + "<br>" +
              "temporarily changed its name to Google..." + "<br>" + "<br>" +
              "...in an attempt to capture a spot" + "<br>" +
              "in Google's new broadband/fiber-optics project." + "<br>" + "<br>" +"<br>" +
              "source: http://en.wikipedia.org/wiki/Google_server#Oil_Tanker_Data_Center";
JLabel label = new JLabel("<html><div style='text-align: center;'>" + text + "</div></html>");

A perl oneliner would do: perl -i.bak -pe 's/[^[:ascii:]]//g' <your file>

-i says that the file is going to be edited inplace, and the backup is going to be saved with extension .bak.

Just make a comparison function/functor:

bool my_cmp(const data& a, const data& b)
{
    // smallest comes first
    return a.word.size() < b.word.size();
}

std::sort(info.begin(), info.end(), my_cmp);

Or provide an bool operator<(const data& a) const in your data class:

struct data {
    string word;
    int number;

    bool operator<(const data& a) const
    {
        return word.size() < a.word.size();
    }
};

or non-member as Fred said:

struct data {
    string word;
    int number;
};

bool operator<(const data& a, const data& b)
{
    return a.word.size() < b.word.size();
}

and just call std::sort():

std::sort(info.begin(), info.end());

I was using python interpolation and forgot the ending s character:

a = dict(foo='bar')
print("What comes after foo? %(foo)" % a) # Should be %(foo)s

Watch those typos.

For the question

How can i run a jar file in command prompt but with arguments

.

To pass arguments to the jar file at the time of execution

java -jar myjar.jar arg1 arg2

In the main() method of "Main-Class" [mentioned in the manifest.mft file]of your JAR file. you can retrieve them like this:

String arg1 = args[0];
String arg2 = args[1];

Like others have mentioned, I think of roles as containers for more granular permissions.

Although I found the Hierarchy Role implementation to be lacking fine control of these granular permission.
So I created a library to manage the relationships and inject the permissions as granted authorities in the security context.

I may have a set of permissions in the app, something like CREATE, READ, UPDATE, DELETE, that are then associated with the user's Role.

Or more specific permissions like READ_POST, READ_PUBLISHED_POST, CREATE_POST, PUBLISH_POST

These permissions are relatively static, but the relationship of roles to them may be dynamic.

Example -

@Autowired 
RolePermissionsRepository repository;

public void setup(){
  String roleName = "ROLE_ADMIN";
  List<String> permissions = new ArrayList<String>();
  permissions.add("CREATE");
  permissions.add("READ");
  permissions.add("UPDATE");
  permissions.add("DELETE");
  repository.save(new RolePermissions(roleName, permissions));
}

You may create APIs to manage the relationship of these permissions to a role.

I don't want to copy/paste another answer, so here's the link to a more complete explanation on SO.
https://stackoverflow.com/a/60251931/1308685

To re-use my implementation, I created a repo. Please feel free to contribute!
https://github.com/savantly-net/spring-role-permissions

If your div looks like this:

<div id="MyDiv">content in here</div>

Then this Javascript:

document.getElementById("MyDiv").innerHTML = "";

will make it look like this:

<div id="MyDiv"></div>

newString = yourString.Substring(0, yourString.length -1);

Router Link

routerLink with brackets and none - simple explanation.

The difference between routerLink= and [routerLink] is mostly like relative and absolute path.

Similar to a href you may want to navigate to ./about.html or https://your-site.com/about.html.

When you use without brackets then you navigate relative and without params;

my-app.com/dashboard/client

"jumping" from my-app.com/dashboard to my-app.com/dashboard/client

<a routerLink="client/{{ client.id }}" .... rest the same

When you use routerLink with brackets then you execute app to navigate absolute and you can add params how is the puzzle of your new link

first of all it will not include the "jump" from dashboard/ to dashboard/client/client-id and bring you data of client/client-id which is more helpful for EDIT CLIENT

<a [routerLink]="['/client', client.id]" ... rest the same

The absolute way or brackets routerLink require additional set up of you components and app.routing.module.ts

The code without error will "tell you more/what is the purpose of []" when you make the test. Just check this with or without []. Than you may experiments with selectors which - as mention above - helps with dynamics routing.

Angular.io Selectors

See whats the routerLink construct

https://angular.io/api/router/RouterLink#selectors

You can use any bash looping constructs like FOR, with is compatible to Linux and Mac.

https://tiswww.case.edu/php/chet/bash/bashref.html#Looping-Constructs

In your specific case you can define N iterations, with N is a number defining how many curl executions you want.

for n in {1..N}; do curl <arguments>; done

ex:

for n in {1..20}; do curl -d @notification.json -H 'Content-Type: application/json' localhost:3000/dispatcher/notify; done

In PHP and phpMyAdmin

$tb = tableDataName; //Table name
$now = date('Y-m-d'); //Current date

//start and end is the fields of tabla with date format value (yyyy-m-d)

$query = "SELECT * FROM $tb WHERE start <= '".$now."' AND end >= '".$now."'";

UPDATE: Now it's very simple to add HTML attributes to the default editor templates. It neans instead of doing this:

@Html.TextBoxFor(m => m.userCode, new { @readonly="readonly" })

you simply can do this:

@Html.EditorFor(m => m.userCode, new { htmlAttributes = new { @readonly="readonly" } })

Benefits: You haven't to call .TextBoxFor, etc. for templates. Just call .EditorFor.

While @Shark's solution works correctly, and it is simple and useful, my solution (that I use always) is this one: Create an editor-template that can handles readonly attribute:

1. Create a folder named EditorTemplates in ~/Views/Shared/
2. Create a razor PartialView named String.cshtml

3. Fill the String.cshtml with this code:

   @if(ViewData.ModelMetadata.IsReadOnly) {
       @Html.TextBox("", ViewData.TemplateInfo.FormattedModelValue,
           new { @class = "text-box single-line readonly", @readonly = "readonly", disabled = "disabled" })
   } else {
       @Html.TextBox("", ViewData.TemplateInfo.FormattedModelValue,
           new { @class = "text-box single-line" })
   }
   

4. In model class, put the [ReadOnly(true)] attribute on properties which you want to be readonly.

For example,

public class Model {
    // [your-annotations-here]
    public string EditablePropertyExample { get; set; }

    // [your-annotations-here]
    [ReadOnly(true)]
    public string ReadOnlyPropertyExample { get; set; }
}

Now you can use Razor's default syntax simply:

@Html.EditorFor(m => m.EditablePropertyExample)
@Html.EditorFor(m => m.ReadOnlyPropertyExample)

The first one renders a normal text-box like this:

<input class="text-box single-line" id="field-id" name="field-name" />

And the second will render to;

<input readonly="readonly" disabled="disabled" class="text-box single-line readonly" id="field-id" name="field-name" />

You can use this solution for any type of data (DateTime, DateTimeOffset, DataType.Text, DataType.MultilineText and so on). Just create an editor-template.

If you want to avoid the problem that David Meister posted and you are sure about the number of decimal places, you can replace all dots and commas and divide by 100, ex.:

var value = "2,299.00";
var amount = parseFloat(value.replace(/"|\,|\./g, ''))/100;

or if you have 3 decimals

var value = "2,299.001";
var amount = parseFloat(value.replace(/"|\,|\./g, ''))/1000;

It's up to you if you want to use parseInt, parseFloat or Number. Also If you want to keep the number of decimal places you can use the function .toFixed(...).

If you're targeting HTML5 only you can use:

<input type="text" id="firstname" placeholder="First Name:" />

For non HTML5 browsers, I would build upon Floern's answer by using jQuery and make the javascript non-obtrusive. I would also use a class to define the blurred properties.

$(document).ready(function () {

    //Set the initial blur (unless its highlighted by default)
    inputBlur($('#Comments'));

    $('#Comments').blur(function () {
        inputBlur(this);
    });
    $('#Comments').focus(function () {
        inputFocus(this);
    });

})

Functions:

function inputFocus(i) {
    if (i.value == i.defaultValue) {
        i.value = "";
        $(i).removeClass("blurredDefaultText");
    }
}
function inputBlur(i) {
    if (i.value == "" || i.value == i.defaultValue) {
        i.value = i.defaultValue;
        $(i).addClass("blurredDefaultText");
    }
}

CSS:

.blurredDefaultText {
    color:#888 !important;
}

To center it both vertically and horizontally do this:

div#thing {
   position: absolute;
   left: 50%;
   top: 50%;
   transform: translate(-50%, -50%);
}

You can use pip install scikit-image.

Also see the recommended procedure.

you are looking for http://api.jquery.com/hasClass/

<div id="mydiv" class="foo bar"></div>

$('#mydiv').hasClass('foo') //returns ture

I believe it would be:

void setCurrent(boolean current)
boolean isCurrent()

I wanted to compare the method using substring and the method using slice from Base33 and user113716 respectively, to do that I wrote some code

also have a look at this performance comparison, substring, slice

The code I used creates huge strings and inserts the string "bar " multiple times into the huge string

if (!String.prototype.splice) {
    /**
     * {JSDoc}
     *
     * The splice() method changes the content of a string by removing a range of
     * characters and/or adding new characters.
     *
     * @this {String}
     * @param {number} start Index at which to start changing the string.
     * @param {number} delCount An integer indicating the number of old chars to remove.
     * @param {string} newSubStr The String that is spliced in.
     * @return {string} A new string with the spliced substring.
     */
    String.prototype.splice = function (start, delCount, newSubStr) {
        return this.slice(0, start) + newSubStr + this.slice(start + Math.abs(delCount));
    };
}

String.prototype.splice = function (idx, rem, str) {
    return this.slice(0, idx) + str + this.slice(idx + Math.abs(rem));
};


String.prototype.insert = function (index, string) {
    if (index > 0)
        return this.substring(0, index) + string + this.substring(index, this.length);

    return string + this;
};


function createString(size) {
    var s = ""
    for (var i = 0; i < size; i++) {
        s += "Some String "
    }
    return s
}


function testSubStringPerformance(str, times) {
    for (var i = 0; i < times; i++)
        str.insert(4, "bar ")
}

function testSpliceStringPerformance(str, times) {
    for (var i = 0; i < times; i++)
        str.splice(4, 0, "bar ")
}


function doTests(repeatMax, sSizeMax) {
    n = 1000
    sSize = 1000
    for (var i = 1; i <= repeatMax; i++) {
        var repeatTimes = n * (10 * i)
        for (var j = 1; j <= sSizeMax; j++) {
            var actualStringSize = sSize *  (10 * j)
            var s1 = createString(actualStringSize)
            var s2 = createString(actualStringSize)
            var start = performance.now()
            testSubStringPerformance(s1, repeatTimes)
            var end = performance.now()
            var subStrPerf = end - start

            start = performance.now()
            testSpliceStringPerformance(s2, repeatTimes)
            end = performance.now()
            var splicePerf = end - start

            console.log(
                "string size           =", "Some String ".length * actualStringSize, "\n",
                "repeat count          = ", repeatTimes, "\n",
                "splice performance    = ", splicePerf, "\n",
                "substring performance = ", subStrPerf, "\n",
                "difference = ", splicePerf - subStrPerf  // + = splice is faster, - = subStr is faster
                )

        }
    }
}

doTests(1, 100)

The general difference in performance is marginal at best and both methods work just fine (even on strings of length ~~ 12000000)

This code makes a window with the conditions that the user cannot change the dimensions of the Tk() window, and also disables the maximise button.

import tkinter as tk

root = tk.Tk()
root.resizable(width=False, height=False)
root.mainloop()

Within the program you can change the window dimensions with @Carpetsmoker's answer, or by doing this:

root.geometry('{}x{}'.format(<widthpixels>, <heightpixels>))

It should be fairly easy for you to implement that into your code. :)

The following command gives you all information about your CPU

$ sysctl -a | sort | grep cpu

Since the release of Oracle 12c it is now easier to rearrange columns logically.

Oracle 12c added support for making columns invisible and that feature can be used to rearrange columns logically.

Quote from the documentation on invisible columns:

When you make an invisible column visible, the column is included in the table's column order as the last column.

Example

Create a table:

CREATE TABLE t (
    a INT,
    b INT,
    d INT,
    e INT
);

Add a column:

ALTER TABLE t ADD (c INT);

Move the column to the middle:

ALTER TABLE t MODIFY (d INVISIBLE, e INVISIBLE);
ALTER TABLE t MODIFY (d VISIBLE, e VISIBLE);

DESCRIBE t;

Name
----
A
B
C
D
E

Credits

I learned about this from an article by Tom Kyte on new features in Oracle 12c.

        var eventids = GetEventIdsByEventDate(DateTime.Now);
        var result = eventsdb.Where(e => eventids.Contains(e));

If you are returnning List<EventFeed> inside the method, you should change the method return type from IEnumerable<EventFeed> to List<EventFeed>.

This query can also be used.

DECLARE @SelectedDate DATE =  GETDATE()

SELECT DATEADD(DAY, - DAY(@SelectedDate), DATEADD(MONTH, 1 , @SelectedDate)) EndOfMonth

From Android's Developer Documentation on Managing Projects from Eclipse with ADT:

Setting up a Library Project

Next, set the project's Properties to indicate that it is a library project:

1. In the Package Explorer, right-click the library project and select Properties.
2. In the Properties window, select the "Android" properties group at left and locate the Library properties at right.
3. Select the "is Library" checkbox and click Apply.
4. Click OK to close the Properties window.

So, open your project properties, un-select the "Is Library" checkbox, and click Apply to make your project a normal Android project (not a library project).

I this answer to setup a combo box from an enum attributes which was great.

I then needed to code the reverse so that I can get the selection from the box and return the enum in the correct type.

I also modified the code to handle the case where an attribute was missing

For the benefits of the next person, here is my final solution

public static class Program
{
   static void Main(string[] args)
    {
       // display the description attribute from the enum
       foreach (Colour type in (Colour[])Enum.GetValues(typeof(Colour)))
       {
            Console.WriteLine(EnumExtensions.ToName(type));
       }

       // Get the array from the description
       string xStr = "Yellow";
       Colour thisColour = EnumExtensions.FromName<Colour>(xStr);

       Console.ReadLine();
    }

   public enum Colour
   {
       [Description("Colour Red")]
       Red = 0,

       [Description("Colour Green")]
       Green = 1,

       [Description("Colour Blue")]
       Blue = 2,

       Yellow = 3
   }
}

public static class EnumExtensions
{

    // This extension method is broken out so you can use a similar pattern with 
    // other MetaData elements in the future. This is your base method for each.
    public static T GetAttribute<T>(this Enum value) where T : Attribute
    {
        var type = value.GetType();
        var memberInfo = type.GetMember(value.ToString());
        var attributes = memberInfo[0].GetCustomAttributes(typeof(T), false);

        // check if no attributes have been specified.
        if (((Array)attributes).Length > 0)
        {
            return (T)attributes[0];
        }
        else
        {
            return null;
        }
    }

    // This method creates a specific call to the above method, requesting the
    // Description MetaData attribute.
    public static string ToName(this Enum value)
    {
        var attribute = value.GetAttribute<DescriptionAttribute>();
        return attribute == null ? value.ToString() : attribute.Description;
    }

    /// <summary>
    /// Find the enum from the description attribute.
    /// </summary>
    /// <typeparam name="T"></typeparam>
    /// <param name="desc"></param>
    /// <returns></returns>
    public static T FromName<T>(this string desc) where T : struct
    {
        string attr;
        Boolean found = false;
        T result = (T)Enum.GetValues(typeof(T)).GetValue(0);

        foreach (object enumVal in Enum.GetValues(typeof(T)))
        {
            attr = ((Enum)enumVal).ToName();

            if (attr == desc)
            {
                result = (T)enumVal;
                found = true;
                break;
            }
        }

        if (!found)
        {
            throw new Exception();
        }

        return result;
    }
}

}

If you have multiple Menus with Submenus, then you can go with the below solution.

HTML

          <ul class="sidebar-menu" id="nav-accordion">
             <li class="sub-menu">
                  <a href="" ng-click="hasSubMenu('dashboard')">
                      <i class="fa fa-book"></i>
                      <span>Dashboard</span>
                      <i class="fa fa-angle-right pull-right"></i>
                  </a>
                  <ul class="sub" ng-show="showDash">
                      <li><a ng-class="{ active: isActive('/dashboard/loan')}" href="#/dashboard/loan">Loan</a></li>
                      <li><a ng-class="{ active: isActive('/dashboard/recovery')}" href="#/dashboard/recovery">Recovery</a></li>
                  </ul>
              </li>
              <li class="sub-menu">
                  <a href="" ng-click="hasSubMenu('customerCare')">
                      <i class="fa fa-book"></i>
                      <span>Customer Care</span>
                      <i class="fa fa-angle-right pull-right"></i>
                  </a>
                  <ul class="sub" ng-show="showCC">
                      <li><a ng-class="{ active: isActive('/customerCare/eligibility')}" href="#/CC/eligibility">Eligibility</a></li>
                      <li><a ng-class="{ active: isActive('/customerCare/transaction')}" href="#/CC/transaction">Transaction</a></li>
                  </ul>
              </li>
          </ul>

There are two functions i have called first is ng-click = hasSubMenu('dashboard'). This function will be used to toggle the menu and it is explained in the code below. The ng-class="{ active: isActive('/customerCare/transaction')} it will add a class active to the current menu item.

Now i have defined some functions in my app:

First, add a dependency $rootScope which is used to declare variables and functions. To learn more about $roootScope refer to the link : https://docs.angularjs.org/api/ng/service/$rootScope

Here is my app file:

 $rootScope.isActive = function (viewLocation) { 
                return viewLocation === $location.path();
        };

The above function is used to add active class to the current menu item.

        $rootScope.showDash = false;
        $rootScope.showCC = false;

        var location = $location.url().split('/');

        if(location[1] == 'customerCare'){
            $rootScope.showCC = true;
        }
        else if(location[1]=='dashboard'){
            $rootScope.showDash = true;
        }

        $rootScope.hasSubMenu = function(menuType){
            if(menuType=='dashboard'){
                $rootScope.showCC = false;
                $rootScope.showDash = $rootScope.showDash === false ? true: false;
            }
            else if(menuType=='customerCare'){
                $rootScope.showDash = false;
                $rootScope.showCC = $rootScope.showCC === false ? true: false;
            }
        }

By default $rootScope.showDash and $rootScope.showCC are set to false. It will set the menus to closed when page is initially loaded. If you have more than two submenus add accordingly.

hasSubMenu() function will work for toggling between the menus. I have added a small condition

if(location[1] == 'customerCare'){
                $rootScope.showCC = true;
            }
            else if(location[1]=='dashboard'){
                $rootScope.showDash = true;
            }

it will remain the submenu open after reloading the page according to selected menu item.

I have defined my pages like:

$routeProvider
        .when('/dasboard/loan', {
            controller: 'LoanController',
            templateUrl: './views/loan/view.html',
            controllerAs: 'vm'
        })

You can use isActive() function only if you have a single menu without submenu. You can modify the code according to your requirement. Hope this will help. Have a great day :)

Ahah! Cade is on the money.

An artifact in TOAD prints \r\n as two placeholder 'blob' characters, but prints a single \r also as two placeholders. The 1st step toward a solution is to use ..

REPLACE( col_name, CHR(13) || CHR(10) )

.. but I opted for the slightly more robust ..

REPLACE(REPLACE( col_name, CHR(10) ), CHR(13) )

.. which catches offending characters in any order. My many thanks to Cade.

M.

This should be work for you:(DataTables 1.10.7)

oTable = $('#myTable').dataTable();

$('#myInputTextField').on('keyup change', function(){
  oTable.api().search($(this).val()).draw();
})

or

oTable = $('#myTable').DataTable();

$('#myInputTextField').on('keyup change', function(){
  oTable.search($(this).val()).draw();
})

Oddly, the only decent JSON processor mentioned so far has been GSON.

Here are more good choices:

• Jackson (Github) -- powerful data binding (JSON to/from POJOs), streaming (ultra fast), tree model (convenient for untyped access)
• Flex-JSON -- highly configurable serialization

EDIT (Aug/2013):

One more to consider:

• Genson -- functionality similar to Jackson, aimed to be easier to configure by developer

It depends on what you want to do. For example you could stick in some conditionals like this in your comprehensions:

# get the squares of each number from 1 to 9, excluding 2
myList = [i**2 for i in range(10) if i != 2]
print(myList)

# --> [0, 1, 9, 16, 25, 36, 49, 64, 81]

DECLARE @q nvarchar(4000)
SET @q = 'DECLARE @tmp TABLE (code VARCHAR(50), mount MONEY)
INSERT INTO @tmp
  (
    code,
    mount
  )
SELECT coa_code,
       amount
FROM   T_Ledger_detail

SELECT *
FROM   @tmp'

EXEC sp_executesql @q

If you want in dynamic query

That is because you are opening , writing and closing the file 10 times inside your for loop

myfile = open('xyz.txt', 'w')
myfile.writelines(var1)
myfile.close()

You should open and close your file outside for loop.

myfile = open('xyz.txt', 'w')
for line in lines:
    var1, var2 = line.split(",");
    myfile.write("%s\n" % var1)

myfile.close()
text_file.close()

You should also notice to use write and not writelines.

writelines writes a list of lines to your file.

Also you should check out the answers posted by folks here that uses with statement. That is the elegant way to do file read/write operations in Python

You can also use a counter! It doesn't preserve the order, but it'll consider the duplicates:

>>> from collections import Counter
>>> a = [1,2,3,4,5]
>>> b = [1,3,5,6]
>>> d1, d2 = Counter(a), Counter(b)
>>> c = [n for n in d1.keys() & d2.keys() for _ in range(min(d1[n], d2[n]))]
>>> print(c)
[1,3,5]

Open up the Windows task manager, kill the process named adb.exe, and re-launch your program.

If your table columns contains duplicate data and If you directly apply row_ number() and create PARTITION on column, there is chance to have result in duplicated row and with row number value.

To remove duplicate row, you need one more INNER query in from clause which eliminates duplicate rows and then it will give output to it's foremost outer FROM clause where you can apply PARTITION and ROW_NUMBER ().

As like below example:

SELECT DATE, STATUS, TITLE, ROW_NUMBER() OVER (PARTITION BY DATE, STATUS, TITLE ORDER BY QUANTITY ASC) AS Row_Num
FROM (
     SELECT DISTINCT <column names>...
) AS tbl

if you mean an anonymous function, and are using a version of Java before Java 8, then in a word, no. (Read about lambda expressions if you use Java 8+)

However, you can implement an interface with a function like so :

Comparator<String> c = new Comparator<String>() {
    int compare(String s, String s2) { ... }
};

and you can use this with inner classes to get an almost-anonymous function :)

<BUTTON NAME='my_button' VALUE=sequence_no TYPE='SUBMIT' style="background-color:transparent ; border:none; color:blue;" onclick="this.form.target='_blank';return true;"><u>open new page</u></BUTTON>

This button will look like a URL and can be opened in a new tab.

In my case I'm using an external maven installation with m2e. I've added my proxy settings to the external maven installation's settings.xml file. These settings haven't been used by m2e even after I've set the external maven installation as default maven installation.

To solve the problem I've configured the global maven settings file within eclipse to be the settings.xml file from my external maven installation.

Now eclipse can download the required artifacts.

My Solution

With my solution I'm not using notifyDataSetChanged(), because annoying whenever item is clicked, all the items from list got refreshed. To tackle this problem, I used notifyItemChanged(position); This will only change the selected item.

Below I have added the code of my omBindViewHolder.

private int previousPosition = -1;
private SingleViewItemBinding previousView;

@Override
public void onBindViewHolder(@NonNull final ItemViewHolder holder, final int position) {
    holder.viewBinding.setItem(itemList.get(position));
    holder.viewBinding.rlContainerMain.setOnClickListener(new View.OnClickListener() {
        @Override
        public void onClick(View view) {
            clickRecyclerView.clickRecyclerItem(position, 0);

            previousPosition = position;
            notifyItemChanged(position);

            if(previousView != null){
                previousView.rlContainerMain.setBackgroundColor(
                        ContextCompat.getColor(context, R.color.colorGrayLight));

            }
        }
    });

    if(position == previousPosition){
        previousView = holder.viewBinding;

        holder.viewBinding.rlContainerMain.setBackgroundColor(
                ContextCompat.getColor(context, R.color.colorPrimary));

    }
    else {
        holder.viewBinding.rlContainerMain.setBackgroundColor(
                ContextCompat.getColor(context, R.color.colorGrayLight));

    }

}

Its because the font size (9px) is too small to display bold. Try 11px or more and it works fine.

From outside the defining class, as @Telos mentions, you can only use EventHandler on the left-hand side of a += or a -=. So, if you have the ability to modify the defining class, you could provide a method to perform the check by checking if the event handler is null - if so, then no event handler has been added. If not, then maybe and you can loop through the values in Delegate.GetInvocationList. If one is equal to the delegate that you want to add as event handler, then you know it's there.

public bool IsEventHandlerRegistered(Delegate prospectiveHandler)
{   
    if ( this.EventHandler != null )
    {
        foreach ( Delegate existingHandler in this.EventHandler.GetInvocationList() )
        {
            if ( existingHandler == prospectiveHandler )
            {
                return true;
            }
        }
    }
    return false;
}

And this could easily be modified to become "add the handler if it's not there". If you don't have access to the innards of the class that's exposing the event, you may need to explore -= and +=, as suggested by @Lou Franco.

However, you may be better off reexamining the way you're commissioning and decommissioning these objects, to see if you can't find a way to track this information yourself.

EDIT :
http://codepen.io/gcyrillus/pen/daCyu So for a popup, you have to use position:fixed , display:table property and max-width with em or rem values :) with this CSS basis :

#popup {
  position:fixed;
  width:100%;
  height:100%;
  display:table;
  pointer-events:none;
}
#popup > div {
  display:table-cell;
  vertical-align:middle;
}
#popup p {
  width:80%;
  max-width:20em;
  margin:auto;
  pointer-events:auto;
}

You can just controll it with a boolean, so you only call unbind if bind has been made

public void doBindService()
{
    if (!mIsBound)
    {
        bindService(new Intent(this, DMusic.class), Scon, Context.BIND_AUTO_CREATE);
        mIsBound = true;
    }
}

public void doUnbindService()
{
    if (mIsBound)
    {
        unbindService(Scon);
        mIsBound = false;
    }
}

If you only want to unbind it if it has been connected

public ServiceConnection Scon = new ServiceConnection() {

    public void onServiceConnected(ComponentName name, IBinder binder)
    {
        mServ = ((DMusic.ServiceBinder) binder).getService();
        mIsBound = true;
    }

    public void onServiceDisconnected(ComponentName name)
    {
        mServ = null;
    }
};

Here is how to know active shortcut (depending on your OS and notebook version, it might change)

Help > Keyboard Shortcuts > toggle line numbers

On OSX running ipython3 it was ESC L

Arrays.asList(array);    

Example:

 List<String> stooges = Arrays.asList("Larry", "Moe", "Curly");

See Arrays.asList class documentation.

I have not used the app, but I've seen Rec. referenced as a way to do this, but you need root the phone.

From the documentation for strtotime():

Dates in the m/d/y or d-m-y formats are disambiguated by looking at the separator between the various components: if the separator is a slash (/), then the American m/d/y is assumed; whereas if the separator is a dash (-) or a dot (.), then the European d-m-y format is assumed.

In your date string, you have 12-16-2013. 16 isn't a valid month, and hence strtotime() returns false.

Since you can't use DateTime class, you could manually replace the - with / using str_replace() to convert the date string into a format that strtotime() understands:

$date = '2-16-2013';
echo date('Y-m-d', strtotime(str_replace('-','/', $date))); // => 2013-02-16

Your DOS command 2> nul

Read page Using command redirection operators. Besides the "2>" construct mentioned by Tanuki Software, it lists some other useful combinations.

The last-child selector is used to select the last child element of a parent. It cannot be used to select the last child element with a specific class under a given parent element.

The other part of the compound selector (which is attached before the :last-child) specifies extra conditions which the last child element must satisfy in-order for it to be selected. In the below snippet, you would see how the selected elements differ depending on the rest of the compound selector.

.parent :last-child{ /* this will select all elements which are last child of .parent */_x000D_
  font-weight: bold;_x000D_
}_x000D_
_x000D_
.parent div:last-child{ /* this will select the last child of .parent only if it is a div*/_x000D_
  background: crimson;_x000D_
}_x000D_
_x000D_
.parent div.child-2:last-child{ /* this will select the last child of .parent only if it is a div and has the class child-2*/_x000D_
  color: beige;_x000D_
}

<div class='parent'>_x000D_
  <div class='child'>Child</div>_x000D_
  <div class='child'>Child</div>_x000D_
  <div class='child'>Child</div>_x000D_
  <div>Child w/o class</div>_x000D_
</div>_x000D_
<div class='parent'>_x000D_
  <div class='child'>Child</div>_x000D_
  <div class='child'>Child</div>_x000D_
  <div class='child'>Child</div>_x000D_
  <div class='child-2'>Child w/o class</div>_x000D_
</div>_x000D_
<div class='parent'>_x000D_
  <div class='child'>Child</div>_x000D_
  <div class='child'>Child</div>_x000D_
  <div class='child'>Child</div>_x000D_
  <p>Child w/o class</p>_x000D_
</div>

To answer your question, the below would style the last child li element with background color as red.

li:last-child{
    background-color: red;
}

But the following selector would not work for your markup because the last-child does not have the class='complete' even though it is an li.

li.complete:last-child{
    background-color: green;
}

It would have worked if (and only if) the last li in your markup also had class='complete'.

To address your query in the comments:

@Harry I find it rather odd that: .complete:last-of-type does not work, yet .complete:first-of-type does work, regardless of it's position it's parents element. Thanks for your help.

The selector .complete:first-of-type works in the fiddle because it (that is, the element with class='complete') is still the first element of type li within the parent. Try to add <li>0</li> as the first element under the ul and you will find that first-of-type also flops. This is because the first-of-type and last-of-type selectors select the first/last element of each type under the parent.

Refer to the answer posted by BoltClock, in this thread for more details about how the selector works. That is as comprehensive as it gets :)

First of all, the easiest way to run things at startup is to add them to the file /etc/rc.local.

Another simple way is to use @reboot in your crontab. Read the cron manpage for details.

However, if you want to do things properly, in addition to adding a script to /etc/init.d you need to tell ubuntu when the script should be run and with what parameters. This is done with the command update-rc.d which creates a symlink from some of the /etc/rc* directories to your script. So, you'd need to do something like:

update-rc.d yourscriptname start 2

However, real init scripts should be able to handle a variety of command line options and otherwise integrate to the startup process. The file /etc/init.d/README has some details and further pointers.

You can try this: git add * && git reset main/dontcheckmein.txt

Thank you very much! Finally I solved the blurred pixels problem with this code:

<canvas id="graph" width=326 height=240 style='width:326px;height:240px'></canvas>

With the addition of the 'half-pixel' does the trick to unblur lines.

Try commenting out the fig = ... line

%matplotlib inline
import numpy as np
import matplotlib.pyplot as plt

N = 50
x = np.random.rand(N)
y = np.random.rand(N)
area = np.pi * (15 * np.random.rand(N))**2

fig = plt.figure(figsize=(18, 18))
plt.scatter(x, y, s=area, alpha=0.5)
plt.show()

f(n) belongs to O(n) if exists positive k as f(n)<=k*n

f(n) belongs to T(n) if exists positive k1, k2 as k1*n<=f(n)<=k2*n

Wikipedia article on Big O Notation

You can try something like this:

public interface PersonRepository extends CrudRepository<Person, Long> {
       @Query("select p from Person AS p"
       + " ,Name AS n"  
       + " where p.forename = n.forename "
       + " and p.surname = n.surname"
       + " and n = :name")
       Set<Person>findByName(@Param("name") Name name);
    }

You can get rid of the first line. You don't need import java.lang.*;

Just change your 5th line to:

public static void main(String [] args) throws Exception

Query_string

(Following is the text of the linked section of the Wikipedia entry.)

Structure

A typical URL containing a query string is as follows:

http://server/path/program?query_string

When a server receives a request for such a page, it runs a program (if configured to do so), passing the query_string unchanged to the program. The question mark is used as a separator and is not part of the query string.

A link in a web page may have a URL that contains a query string, however, HTML defines three ways a web browser can generate the query string:

• a web form via the ... element
• a server-side image map via the ?ismap? attribute on the element with a construction
• an indexed search via the now deprecated element

Web forms

The main use of query strings is to contain the content of an HTML form, also known as web form. In particular, when a form containing the fields field1, field2, field3 is submitted, the content of the fields is encoded as a query string as follows:

field1=value1&field2=value2&field3=value3...

• The query string is composed of a series of field-value pairs.
• Within each pair, the field name and value are separated by an equals sign. The equals sign may be omitted if the value is an empty string.
• The series of pairs is separated by the ampersand, '&' (or semicolon, ';' for URLs embedded in HTML and not generated by a ...; see below). While there is no definitive standard, most web frameworks allow multiple values to be associated with a single field:

field1=value1&field1=value2&field1=value3...

For each field of the form, the query string contains a pair field=value. Web forms may include fields that are not visible to the user; these fields are included in the query string when the form is submitted

This convention is a W3C recommendation. W3C recommends that all web servers support semicolon separators in addition to ampersand separators[6] to allow application/x-www-form-urlencoded query strings in URLs within HTML documents without having to entity escape ampersands.

Technically, the form content is only encoded as a query string when the form submission method is GET. The same encoding is used by default when the submission method is POST, but the result is not sent as a query string, that is, is not added to the action URL of the form. Rather, the string is sent as the body of the HTTP request.

Below line of code can handle:

1. C:/path/path
2. C://path//path
3. C:\path\path
4. C:\path\path

path = re.split(r'[///\]', path)

The Activity which you want it to be the very first screen if your app is opened, then mention it as LAUNCHER in the intent category and remaining activities mention Default in intent category.

For example :- There is 2 activity A and B
The activity A is LAUNCHER so make it as LAUNCHER in the intent Category and B is child for Activity A so make it as DEFAULT.

<application android:icon="@drawable/icon" android:label="@string/app_name">
    <activity android:name=".ListAllActivity"
              android:label="@string/app_name">
        <intent-filter>
            <action android:name="android.intent.action.MAIN" />
            <category android:name="android.intent.category.LAUNCHER" />
        </intent-filter>
    </activity>
    <activity android:name=".AddNewActivity" android:label="@string/app_name">
        <intent-filter>
            <action android:name="android.intent.action.MAIN" />
            <category android:name="android.intent.category.DEFAULT" />
        </intent-filter>
    </activity>
</application>

System.setProperty("gate.home", "/some/directory"); 

After that you can retrieve its value later by calling

String value =  System.getProperty("gate.home");

Call the Below Action Method from your JS file (To get the ipv4 ip address).

    [HttpGet]
    public string GetIP()
    {
        IPAddress[] ipv4Addresses = Array.FindAll(
            Dns.GetHostEntry(string.Empty).AddressList,
            a => a.AddressFamily == System.Net.Sockets.AddressFamily.InterNetwork);
        return ipv4Addresses.ToString();
    }

Check after keeping Breakpoint, and use as per your requirement. Its working fine for me.

Not with an iterator.

For org.json.JSONArray, you can do:

for (int i = 0; i < arr.length(); i++) {
  arr.getJSONObject(i);
}

For javax.json.JsonArray, you can do:

for (int i = 0; i < arr.size(); i++) {
  arr.getJsonObject(i);
}

If you are using an array (and purely an array), the lookup of "contains" is O(N), because worst case, you must iterate the entire array. Now if the array is sorted you can use a binary search, which reduces the search time to log(N) with the overhead of the sort.

If this is something that is invoked repeatedly, place it in a function:

private boolean inArray(int[] array, int value)
{  
     for (int i = 0; i < array.length; i++)
     {
        if (array[i] == value) 
        {
            return true;
        }
     }
    return false;  
}  

My goto is

Console.WriteLine( Serialize(dictionary.ToList() ) );

Make sure you include the package using static System.Text.Json.JsonSerializer;

In SqlServer2005 you can do the following:

DECLARE @Limit INT
DECLARE @Offset INT
SET @Offset = 120000
SET @Limit = 10

SELECT 
    * 
FROM
(
   SELECT 
       row_number() 
   OVER 
      (ORDER BY column) AS rownum, column2, column3, .... columnX
   FROM   
     table
) AS A
WHERE 
 A.rownum BETWEEN (@Offset) AND (@Offset + @Limit-1) 

Press Ctrl + Shift + P.

Before Eclipse Juno you need to place the cursor just beyond an opening or closing brace.

In Juno cursor can be anywhere in the code block.

To get only the name of the directory where script executed:

//Path to script: /data/html/cars/index.php
echo basename(dirname(__FILE__)); //"cars"

The simplest in my opinion is just this:

it = iter([1,2,3,4,5,6])
for x, y in zip(it, it):
    print x, y

Out: 1 2
     3 4
     5 6

No extra imports or anything. And very elegant, in my opinion.

properties-maven-plugin plugin may help:

<plugin>
    <groupId>org.codehaus.mojo</groupId>
    <artifactId>properties-maven-plugin</artifactId>
    <version>1.0.0</version>
    <executions>
        <execution>
            <goals>
                <goal>set-system-properties</goal>
            </goals>
            <configuration>
                <properties>
                    <property>
                        <name>my.property.name</name>
                        <value>my.property.value</value>
                    </property>
                </properties>
            </configuration>
        </execution>
    </executions>
</plugin>

It's been a while since I posted this, but I thought I would show how I figured it out (as best as I recall now).

I did a Maven dependency tree to find dependency conflicts, and I removed all conflicts with exclusions in dependencies, e.g.:

<dependency>
    <groupId>commons-logging</groupId>
    <artifactId>commons-logging-api</artifactId>
    <version>1.1</version>
    <exclusions>
        <exclusion>
            <groupId>javax.servlet</groupId>
            <artifactId>servlet-api</artifactId>
        </exclusion>
    </exclusions>
</dependency>

Also, I used the provided scope for javax.servlet dependencies so as not to introduce an additional conflict with what is provided by Tomcat when I run the app.

<dependency>
    <groupId>javax.servlet</groupId>
    <artifactId>servlet-api</artifactId>
    <version>2.5</version>
    <scope>provided</scope>
</dependency>
<dependency>
    <groupId>javax.servlet.jsp</groupId>
    <artifactId>jsp-api</artifactId>
    <version>2.1</version>
    <scope>provided</scope>
</dependency>

HTH.

If you run pub build --mode=debug the build directory contains the application without symlinks. The Dart code should be retained when --mode=debug is used.

Here is some discussion going on about this topic too Dart and it's place in Rails Assets Pipeline

Given a dataset

df <- data.frame( sex = c('M', 'M', 'F', 'F', 'M'), 
                  occupation = c('analyst', 'dentist', 'dentist', 'analyst', 'cook') )

you can subset rows

df[df$sex == 'M',] # To get all males
df[df$occupation == 'analyst',] # All analysts

etc.

If you want to get number of rows, just call the function nrow such as

nrow(df[df$sex == 'M',])

I know it has been answered, but is this seems to work ok, but I can not tell you if it has a bias. My 'testing' suggests it is, at least, reasonable.

Perhaps Adam Rosenfield would be kind enough to comment?

My (naive?) idea is this:

Accumulate rand5's until there is enough random bits to make a rand7. This takes at most 2 rand5's. To get the rand7 number I use the accumulated value mod 7.

To avoid the accumulator overflowing, and since the accumulator is mod 7 then I take the mod 7 of the accumulator:

(5a + rand5) % 7 = (k*7 + (5a%7) + rand5) % 7 = ( (5a%7) + rand5) % 7

The rand7() function follows:

(I let the range of rand5 be 0-4 and rand7 is likewise 0-6.)

int rand7(){
  static int    a=0;
  static int    e=0;
  int       r;
  a = a * 5 + rand5();
  e = e + 5;        // added 5/7ths of a rand7 number
  if ( e<7 ){
    a = a * 5 + rand5();
    e = e + 5;  // another 5/7ths
  }
  r = a % 7;
  e = e - 7;        // removed a rand7 number
  a = a % 7;
  return r;
}

Edit: Added results for 100 million trials.

'Real' rand functions mod 5 or 7

rand5 : avg=1.999802 0:20003944 1:19999889 2:20003690 3:19996938 4:19995539 rand7 : avg=3.000111 0:14282851 1:14282879 2:14284554 3:14288546 4:14292388 5:14288736 6:14280046

My rand7

Average looks ok and number distributions look ok too.

randt : avg=3.000080 0:14288793 1:14280135 2:14287848 3:14285277 4:14286341 5:14278663 6:14292943

This searches multiple words in multiple files:

egrep 'abc|xyz' file1 file2 ..filen 

my telepathic abilities are not particularly great, but here is what I think you want:

def merge(list_of_strings, indices):
    list_of_strings[indices[0]] = ''.join(list_of_strings[i] for i in indices)
    list_of_strings = [s for i, s in enumerate(list_of_strings) if i not in indices[1:]]
    return list_of_strings

I should note, since it might be not obvious, that it's not the same as what is proposed in other answers.

I had a simular need. Here is what I did:

  <script type="text/javascript" language="javascript">
    function convertEnterToTab() {
      if(event.keyCode==13) {
        event.keyCode = 9;
      }
    }
    document.onkeydown = convertEnterToTab;    
  </script>  

You can also do this by service name.

First, try to find the service name of the respective pod which corresponds to multiple pods of the same service. kubectl get svc.

Next, run the following command to display logs from each container.

kubectl logs -f service/<service-name>

If you have multiple numeric fields, I suggest subclassing UITextField to create a NumericTextField that always displays a numeric keyboard with a done button. Then, simply associate your numeric fields with this class in the Interface Builder and you won't need any additional code in any of your View Controllers. The following is Swift 3.0 class that I'm using in Xcode 8.0.

class NumericTextField: UITextField {
   let numericKbdToolbar = UIToolbar()

    // MARK: Initilization
    required init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)
        self.initialize()
    }

    override init(frame: CGRect) {
        super.init(frame: frame)
        self.initialize()
    }

    // Sets up the input accessory view with a Done button that closes the keyboard
    func initialize()
    {
        self.keyboardType = UIKeyboardType.numberPad

        numericKbdToolbar.barStyle = UIBarStyle.default
        let space = UIBarButtonItem(barButtonSystemItem: UIBarButtonSystemItem.flexibleSpace, target: nil, action: nil)
        let callback = #selector(NumericTextField.finishedEditing)
        let donebutton = UIBarButtonItem(barButtonSystemItem: UIBarButtonSystemItem.done, target: self, action: callback)
        numericKbdToolbar.setItems([space, donebutton], animated: false)
        numericKbdToolbar.sizeToFit()
        self.inputAccessoryView = numericKbdToolbar
    }

    // MARK: On Finished Editing Function
    func finishedEditing()
    {
        self.resignFirstResponder()
    }
}

Swift 4.2

class NumericTextField: UITextField {
    let numericKbdToolbar = UIToolbar()

    // MARK: Initilization
    required init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)
        self.initialize()
    }

    override init(frame: CGRect) {
        super.init(frame: frame)
        self.initialize()
    }

    // Sets up the input accessory view with a Done button that closes the keyboard
    func initialize()
    {
        self.keyboardType = UIKeyboardType.numberPad

        numericKbdToolbar.barStyle = UIBarStyle.default
        let space = UIBarButtonItem(barButtonSystemItem: UIBarButtonItem.SystemItem.flexibleSpace, target: nil, action: nil)
        let callback = #selector(NumericTextField.finishedEditing)
        let donebutton = UIBarButtonItem(barButtonSystemItem: UIBarButtonItem.SystemItem.done, target: self, action: callback)
        numericKbdToolbar.setItems([space, donebutton], animated: false)
        numericKbdToolbar.sizeToFit()
        self.inputAccessoryView = numericKbdToolbar
    }

    // MARK: On Finished Editing Function
    @objc func finishedEditing()
    {
        self.resignFirstResponder()
    }
}

That looks like it might belong in the select statement:

SELECT id, col1, col2, col3, (CASE WHEN table3.col3 IS NULL THEN table2.col3 AS col4 ELSE table3.col3 as col4 END)
FROM table1
LEFT OUTER JOIN table2
ON table1.id = table2.id
LEFT OUTER JOIN table3
ON table1.id = table3.id

If the only two kinds of values that could be passed to this function are a string or an array of strings, keep it simple and use a typeof check for the string possibility:

function someFunc(arg) {
    var arr = (typeof arg == "string") ? [arg] : arg;
}

The jquery colortip plugin also supports <br> tags in the title attribute, you might want to look into that one.

Do it with inline styles and script:

<div class="btn-group has-feedback has-clear">
    <input id="searchinput" type="search" class="form-control" style="width:200px;">
        <a 
id="searchclear" 
class="glyphicon glyphicon-remove-circle form-control-feedback form-control-clear" 
style="pointer-events:auto; text-decoration:none; cursor:pointer;"
onclick="$(this).prev('input').val('');return false;">
</a>
</div>

Perhaps you're asking about the DOM methods appendChild and insertBefore.

parentNode.insertBefore(newChild, refChild)

Inserts the node newChild as a child of parentNode before the existing child node refChild. (Returns newChild.)

If refChild is null, newChild is added at the end of the list of children. Equivalently, and more readably, use parentNode.appendChild(newChild).

Solution with LOCALE_ID is great if you want to set the language for your app once. But it doesn’t work, if you want to change the language during runtime. For this case you can implement custom date pipe.

import { DatePipe } from '@angular/common';
import { Pipe, PipeTransform } from '@angular/core';
import { TranslateService } from '@ngx-translate/core';

@Pipe({
  name: 'localizedDate',
  pure: false
})
export class LocalizedDatePipe implements PipeTransform {

  constructor(private translateService: TranslateService) {
  }

  transform(value: any, pattern: string = 'mediumDate'): any {
    const datePipe: DatePipe = new DatePipe(this.translateService.currentLang);
    return datePipe.transform(value, pattern);
  }

}

Now if you change the app display language using TranslateService (see ngx-translate)

this.translateService.use('en');

the formats within your app should automatically being updated.

Example of use:

<p>{{ 'note.created-at' | translate:{date: note.createdAt | localizedDate} }}</p>
<p>{{ 'note.updated-at' | translate:{date: note.updatedAt | localizedDate:'fullDate'} }}</p>

or check my simple "Notes" project here.

#include<stdio.h>

int main() {
int num; //given integer
int reminder;
int rev=0; //To reverse the given integer
int count=1;

printf("Enter the integer:");
scanf("%i",&num);

/*First while loop will reverse the number*/
while(num!=0)
{
    reminder=num%10;
    rev=rev*10+reminder;
    num/=10;
}
/*Second while loop will give the number from left to right*/
while(rev!=0)
{
    reminder=rev%10;
    printf("The %d digit is %d\n",count, reminder);
    rev/=10;
    count++; //to give the number from left to right 
}
return (EXIT_SUCCESS);}

It´s very simple to do:

Just add following attribute and code to your Main-method:

[STAThread]
void Main(string[] args])
{
   Application.EnableVisualStyles();
   //Do some stuff...
   while(!Exit)
   {
       Application.DoEvents(); //Now if you call "form.Show()" your form won´t be frozen
       //Do your stuff
   }
}

Now you´re fully able to show WinForms :)

To write inline styling use:

<div style="height: 100px;">
asdfashdjkfhaskjdf
</div>

Inline styling serves a purpose however, it is not recommended in most situations.

The more "proper" solution, would be to make a separate CSS sheet, include it in your HTML document, and then use either an ID or a class to reference your div.

if you have the file structure:

index.html
>>/css/
>>/css/styles.css

Then in your HTML document between <head> and </head> write:

<link href="css/styles.css" rel="stylesheet" />

Then, change your div structure to be:

<div id="someidname" class="someclassname">
    asdfashdjkfhaskjdf
</div>

In css, you can reference your div from the ID or the CLASS.

To do so write:

.someclassname { height: 100px; }

OR

#someidname { height: 100px; }

Note that if you do both, the one that comes further down the file structure will be the one that actually works.

For example... If you have:

.someclassname { height: 100px; }

.someclassname { height: 150px; }

Then in this situation the height will be 150px.

EDIT:

To answer your secondary question from your edit, probably need overflow: hidden; or overflow: visible; . You could also do this:

<div class="span12">
    <div style="height:100px;">
        asdfashdjkfhaskjdf
    </div>
</div>

Yours:

  <div style="height:42px;width:42px">
  <img src="http://someimage.jpg">

Is it okay to use this code?

  <div class= "box">
  <img src= "http://someimage.jpg" class= "img">
  </div>

  <style type="text/css">
  .box{width: 42; height: 42;}
  .img{width: 20; height:20;}
  </style>

Just trying, though late. :3 For someone else reading this, letme know if the way i wrote the code were not good. im new in this kind of language. and i still want to learn more.

I know this is a Java question, but if you're using Kotlin you can do this quite nicely:

val uri = request.run {
    if (queryString.isNullOrBlank()) requestURI else "$requestURI?$queryString"
}

Why would you bother? Load your CSV into Excel like this:

$csv = Join-Path $env:TEMP "process.csv"
$xls = Join-Path $env:TEMP "process.xlsx"

$xl = New-Object -COM "Excel.Application"
$xl.Visible = $true

$wb = $xl.Workbooks.OpenText($csv)

$wb.SaveAs($xls, 51)

You just need to make sure that the CSV export uses the delimiter defined in your regional settings. Override with -Delimiter if need be.

Edit: A more general solution that should preserve the values from the CSV as plain text. Code for iterating over the CSV columns taken from here.

$csv = Join-Path $env:TEMP "input.csv"
$xls = Join-Path $env:TEMP "output.xlsx"

$xl = New-Object -COM "Excel.Application"
$xl.Visible = $true

$wb = $xl.Workbooks.Add()
$ws = $wb.Sheets.Item(1)

$ws.Cells.NumberFormat = "@"

$i = 1
Import-Csv $csv | ForEach-Object {
  $j = 1
  foreach ($prop in $_.PSObject.Properties) {
    if ($i -eq 1) {
      $ws.Cells.Item($i, $j++).Value = $prop.Name
    } else {
      $ws.Cells.Item($i, $j++).Value = $prop.Value
    }
  }
  $i++
}

$wb.SaveAs($xls, 51)
$wb.Close()

$xl.Quit()
[System.Runtime.Interopservices.Marshal]::ReleaseComObject($xl)

Obviously this second approach won't perform too well, because it's processing each cell individually.

interface in the Java programming language is an abstract type that is used to specify a behavior that classes must implement. They are similar to protocols. Interfaces are declared using the interface keyword

@interface is used to create your own (custom) Java annotations. Annotations are defined in their own file, just like a Java class or interface. Here is custom Java annotation example:

@interface MyAnnotation {

    String   value();

    String   name();
    int      age();
    String[] newNames();

}

This example defines an annotation called MyAnnotation which has four elements. Notice the @interface keyword. This signals to the Java compiler that this is a Java annotation definition.

Notice that each element is defined similarly to a method definition in an interface. It has a data type and a name. You can use all primitive data types as element data types. You can also use arrays as data type. You cannot use complex objects as data type.

To use the above annotation, you could use code like this:

@MyAnnotation(
    value="123",
    name="Jakob",
    age=37,
    newNames={"Jenkov", "Peterson"}
)
public class MyClass {


}

Reference - http://tutorials.jenkov.com/java/annotations.html

.NetCore is a fine release from Microsoft and Visual Studio's latest version is also available for mac but there is still some limitation. Like for creating GUI based application on .net core you have to write code manually for everything. Like in older version of VS we just drag and drop the things and magic happens. But in VS latest version for mac every code has to be written manually. However you can make web application and console application easily on VS for mac.

Try

select * from dataset
where id = 2
order by date limit 1

Been a while since I did sql, so this might need some tweaking.

Clean your project Remove the /obj folder (probably using publish and deploy? - there is a bug in it)

Use convert from http://www.imagemagick.org. (Readily supplied as a package in most Linux distributions.)

You can use a lambda:

Collectors.toMap(p -> p.getLast(), Function.identity())

or, more concisely, you can use a method reference using :::

Collectors.toMap(Person::getLast, Function.identity())

and instead of Function.identity, you can simply use the equivalent lambda:

Collectors.toMap(Person::getLast, p -> p)

If you use Netbeans you should get hints whenever an anonymous class can be replaced by a lambda.

Regular expression is the most effective way of checking for a domain validation. If you're dead set on not using a Regular Expression (which IMO is stupid), then you could split each part of a domain:

• www. / sub-domain
• domain name
• .extension

You would then have to check each character in some sort of a loop to see that it matches a valid domain.

Like I said, it's much more effective to use a regular expression.

I couldn't get any of these answers to work on their own. The solution for me was to combine them:

InputMethodManager imm = (InputMethodManager) getSystemService(Context.INPUT_METHOD_SERVICE);
imm.toggleSoftInput(InputMethodManager.SHOW_FORCED, InputMethodManager.HIDE_IMPLICIT_ONLY);
editText.requestFocus();
imm.showSoftInput(editText, InputMethodManager.SHOW_FORCED);

I'm not sure why that was required for me -- according to the docs it seems that either method should have worked on their own.

I accomplished something similar using jQuery Waypoints.

There's a lot of moving parts, and quite a bit of logic (that I hope to get on GitHub some day soon), but essentially what you could do is...

1. Duplicate the table DOM structure in JavaScript and add a class called fixed.
2. Add styles for table.fixed that make it invisible.
3. Set a way point at the bottom of the header navigation that adds a class called sticky to table.fixed
4. Add styles for table.sticky.fixed that position it just below the navbar and also make just the thead content visible. This also has a z-index so it is laid above the rest of the content.
5. Add another waypoint, but in the downward scroll event, that removes .sticky from the table.fixed

You have to duplicate the entire table DOM in order to ensure column widths line up appropriately.

If that sounds really complicated, you might want to try playing around with the DataTables plugin and the FixedHeader extension: https://datatables.net/extensions/fixedheader/

For me, IntelliJ could autocomplete packages, but never seemed to admit there were actual classes at any level of the hierarchy. Neither re-choosing the SDK nor re-creating the project seemed to fix it.

What did fix it was to delete the per-user IDEA directory ( in my case ~/.IntelliJIdea2017.1/) which meant losing all my other customizations... But at least it made the issue go away.

I weird bug* in visual studio 2010, if you put controls inside a Placeholder it does not render them in design view mode.

This is especially true for Hidenfields and Empty labels.

I would love to use placeholders instead of panels but I hate the fact I cant put other controls inside placeholders at design time in the GUI.

Cors change the request method before it's done, from POST to OPTIONS, so, your post data will not be sent. The way that worked to handle this cors issue, is performing the request with ajax, which does not support the OPTIONS method. example code:

        $.ajax({
            type: "POST",
            crossdomain: true,
            url: "http://localhost:1415/anything",
            dataType: "json",
            data: JSON.stringify({
                anydata1: "any1",
                anydata2: "any2",
            }),
            success: function (result) {
                console.log(result)
            },
            error: function (xhr, status, err) {
                console.error(xhr, status, err);
            }
        });

with this headers on c# server:

                    if (request.HttpMethod == "OPTIONS")
                    {
                          response.AddHeader("Access-Control-Allow-Headers", "Content-Type, Accept, X-Requested-With");
                          response.AddHeader("Access-Control-Allow-Methods", "GET, POST");
                          response.AddHeader("Access-Control-Max-Age", "1728000");
                    }
                    response.AppendHeader("Access-Control-Allow-Origin", "*");

I wrote telegram bot, and have some problem with update rows. Use this example, if you have Model

def update_state(chat_id, state):
    try:
        value = Users.query.filter(Users.chat_id == str(chat_id)).first()
        value.state = str(state)
        db.session.flush()
        db.session.commit()
        #db.session.close()
    except:
        print('Error in def update_state')

Why use db.session.flush()? That's why >>> SQLAlchemy: What's the difference between flush() and commit()?

Browser scrollbars don't work at all on iPhone/iPad. At work we are using custom JavaScript scrollbars like jScrollPane to provide a consistent cross-browser UI: http://jscrollpane.kelvinluck.com/

It works very well for me - you can make some really beautiful custom scrollbars that fit the design of your site.

To get the Android key hash code, follow these steps:

1. Download OpenSSL for Windows here
2. Now unzip to the C drive
3. Open a CMD prompt
4. Type cd C:\Program Files\Java\jdk1.6.0_26\bin
5. Then type only keytool -export -alias myAlias -keystore C:\Users\your user name\.android\myKeyStore | C:\openssl-0.9.8k_WIN32\bin\openssl sha1 -binary | C:\openssl-0.9.8k_WIN32\bin\openssl enc -a -e
6. Done

As with SQL Server 2012, you can use the built-in format function:

SELECT FORMAT(Minutes/60.0, 'N2')

(just for further readings...)

At this time, the only video codec that truly supports an alpha channel is VP8, which Flash uses. MP4 would probably support it if the video was exported as an image sequence, but I'm fairly certain Ogg video files have no support whatsoever for an alpha channel. This might be one of those rare instances where sticking with Flash would serve you better.

You can achieve this by adding border class of bootstrap

like for border left ,you can use border-left

working code

<div class="row">
    <div class="col-xs-6 col-sm-6 col-md-3 text-center leftspan border-right border-bottom" id="one"><h5>Rich Media Ad Production</h5><img src="images/richmedia.png"></div>
    <div class="col-xs-6 col-sm-6 col-md-3 text-center leftspan border-right border-bottom" id="two"><h5>Web Design & Development</h5> <img src="images/web.png" ></div>               
    <div class="col-xs-6 col-sm-6 col-md-3 text-center leftspan border-right border-bottom" id="three"><h5>Mobile Apps Development</h5> <img src="images/mobile.png"></div>
    <div class="col-xs-6 col-sm-6 col-md-3 text-center rightspan  border-bottom" id="four"><h5>Creative Design</h5> <img src="images/mobile.png"> </div>
    <div class="col-xs-12"><hr></div>
    <div class="col-xs-6 col-sm-6 col-md-3 text-center leftspan border-right" id="five"><h5>Web Analytics</h5> <img src="images/analytics.png"></div>
    <div class="col-xs-6 col-sm-6 col-md-3 text-center leftspan border-right" id="six"><h5>Search Engine Marketing</h5> <img src="images/searchengine.png"></div>
    <div class="col-xs-6 col-sm-6 col-md-3 text-center leftspan border-right"  id="seven"><h5>Mobile Apps Development</h5> <img src="images/socialmedia.png"></div>
    <div class="col-xs-6 col-sm-6 col-md-3 text-center rightspan" id="eight"><h5>Quality Assurance</h5> <img src="images/qa.png"></div>

    <hr>
</div>

for more refrence al bootstrap classes all classes ,search for border

I've just had the same error but I knew the table already existed and wanted to add to it. I'm adding my answer as this question comes up as no.1 for me on google when looking for the same error but for a slightly different scenario. Basically I needed to tick

"Add DROP TABLE / VIEW / PROCEDURE / FUNCTION / EVENT / TRIGGER statement"

And this solved the error for me.

Others have pointed out that a get_FOO_display method is what you need. I'm using this:

def get_type(self):
    return [i[1] for i in Item._meta.get_field('type').choices if i[0] == self.type][0]

which iterates over all of the choices that a particular item has until it finds the one that matches the items type

An interface defines a simple contract of methods all implementing classes must implement. When a class implements an interface, it must provide implementations for all its methods.

I guess the poster assumes a certain level of knowledge about the language.

This was what worked for me (using jquery datepicker):

$('body').on('focus', '.datepicker', function() {
 $(this).removeClass('hasDatepicker').datepicker();
});

Try this:

<td>
    <a onclick="return confirm(\'Are you sure?\');" href="'.base_url('category/delete_category/'.$row->category_id).'" class="btn btn-danger btn-sm"><i class="fa fa-trash"></i> Delete Coupon</a>
</td>

you can see this also in sockets ...

PrintWriter out = new PrintWriter(socket.getOutputStream());

out.println("hello");

If you install it directly with the community installer on windows 2008 server, it will reside on c:\ProgamData\MySql\MysqlServerVersion\my.ini

The body has a default margin in most browsers. Try:

body {
    margin: 0;
}

in the page with the iframe.

This was found on Dragon-IT Scripts and Code Repository.

You can do this with the following and stay away from the cscript/wscript differences and allows you to get the same console output that a batch file would have. This can help if your calling VBS from a batch file and need to make it look seamless.

Set fso = CreateObject ("Scripting.FileSystemObject")
Set stdout = fso.GetStandardStream (1)
Set stderr = fso.GetStandardStream (2)
stdout.WriteLine "This will go to standard output."
stderr.WriteLine "This will go to error output."

An easy to use network fault injection tool is Saboteur. It can simulate:

• Total network partition
• Remote service dead (not listening on the expected port)
• Delays
• Packet loss -TCP connection timeout (as often happens when two systems are separated by a stateful firewall)

yourToolTip = new ToolTip();
//The below are optional, of course,

yourToolTip.ToolTipIcon = ToolTipIcon.Info;
yourToolTip.IsBalloon = true;
yourToolTip.ShowAlways = true;

yourToolTip.SetToolTip(lblYourLabel,"Oooh, you put your mouse over me.");

function palindrome(str) {    
    var testString = str.toLowerCase();


    var expression = /[a-z0-9\^s]/gi;
    if (testString.match(expression).reverse().join("") == testString.match(expression).join("")) {
        return true;
    } else {
        return false;
    }
}

I had a similar problem in a MS-Access query, and I solved it by changing my equivalent fName to an "Expression" (as opposed to "Group By" or "Sum"). So long as all of my fields were "Expression", the Access query builder did not require any Group By clause at the end.

You can map JSON to specific class in Groovy using as operator:

import groovy.json.JsonSlurper

String json = '''
{
  "name": "John",  
  "age": 20
}
'''

def person = new JsonSlurper().parseText(json) as Person 

with(person) {
    assert name == 'John'
    assert age == 20
}

The handshake failure could be a buggy TLSv1 protocol implementation.

In our case this helped with java 7:

java -Dhttps.protocols=TLSv1.2,TLSv1.1,TLSv1 

The jvm will negotiate in this order. The servers with the latest update will do 1.2, the buggy ones will go down to v1 and that works with the similar v1 in java 7.

I think you might see slightly better performance by doing it this way:

$("#Create, #Edit").find(".myClass").plugin(){
    // Options
});

This pointed me in the right direction, but I have a DB that originated in MSSQL 2000 and is still using the ntext data type for the column I was replacing on. When you try to run REPLACE on that type you get this error:

Argument data type ntext is invalid for argument 1 of replace function.

The simplest fix, if your column data fits within nvarchar, is to cast the column during replace. Borrowing the code from the accepted answer:

UPDATE YourTable
SET Column1 = REPLACE(cast(Column1 as nvarchar(max)),'a','b')
WHERE Column1 LIKE '%a%'

This worked perfectly for me. Thanks to this forum post I found for the fix. Hopefully this helps someone else!

I solved it with the following:

Go to View-> Property Pages -> Configuration Properties -> Linker -> Input

Under additional dependencies add the thelibrary.lib. Don't use any quotations.

Try to see if the following commands can help you:

sudo su - yourdbuser
psql
\i yourbackupfile

Compare with glob, I recommend pathlib, filter one pattern is very simple.

from pathlib import Path

p = Path(YOUR_PATH)
filtered = [x for x in p.glob("**/*") if not x.name.startswith("eph")]

and if you want to filter more complex pattern, you can define a function to do that, just like:

def not_in_pattern(x):
    return (not x.name.startswith("eph")) and not x.name.startswith("epi")


filtered = [x for x in p.glob("**/*") if not_in_pattern(x)]

use that code, you can filter all files that start with eph or start with epi.

var listTrue = ['a', 'a', 'a', 'a'];
var listFalse = ['a', 'a', 'a', 'ab'];

function areWeTheSame(list) { 
    var sample = list[0];
    return !(list.some(function(item) {
        return !(item == sample);
    }));
}

After updating my entity framework model, I found this error infecting several files in my solution. I simply right clicked on my .edmx file and my TT file and click "Run Custom Tool" and that had me right again after a restart of Visual Studio 2012.

Here's a trick I used once: create a "dummy" directive to hold the parent scope and place it somewhere outside the desired directive. Something like:

module.directive('myDirectiveContainer', function () {
    return {
        controller: function ($scope) {
            this.scope = $scope;
        }
    };
});

module.directive('myDirective', function () {
    return {
        require: '^myDirectiveContainer',
        link: function (scope, element, attrs, containerController) {
            // use containerController.scope here...
        }
    };
});

and then

<div my-directive-container="">
    <div my-directive="">
    </div>
</div>

Maybe not the most graceful solution, but it got the job done.

If it is a string then use the built in float on it to do the conversion for instance: print( "%.5f" % float("1.43572e-03")) answer:0.00143572

For those using org.jvnet.jax-ws-commons:jaxws-maven-plugin to generate a client from WSDL at build-time:

• Place the WSDL somewhere in your src/main/resources
• Do not prefix the wsdlLocation with classpath:
• Do prefix the wsdlLocation with /

Example:

• WSDL is stored in /src/main/resources/foo/bar.wsdl
• Configure jaxws-maven-plugin with <wsdlDirectory>${basedir}/src/main/resources/foo</wsdlDirectory> and <wsdlLocation>/foo/bar.wsdl</wsdlLocation>

I can't think about an easier way to efficiently remove all diacritics from a string than using this amazing solution.

See it in action:

var string = "öäüÖÄÜ";_x000D_
_x000D_
var string_norm = string.normalize('NFD').replace(/[\u0300-\u036f]/g, '');_x000D_
console.log(string_norm);

For what it worth, I had the same problem over my own VPS and it was caused by my low hard disk space on VPS. Confirmed by df -h command and after i cleaned up my VPS' hard disk; the problem was gone.

Cheers.

I'm trying to redirect my current web site to other section on the same page, using JavaScript. This follow code work for me:

location.href='/otherSection'

The reason is simple, your call to ConfigurationSettings.AppSettings is not returning the required config file. Please try any of the following ways:

• Make sure your app config has the same name as your application's exe file - with the extension .config appended eg MyApp.exe.config
• OR you can use ConfigurationManager.OpenExeConfiguration(Assembly.GetExecutingAssembly().Location).AppSettings["StartingMonthColumn"]

Hope this helps

The other answers are correct. However, I sometimes find that I want to open the figure object later. For example, I might want to change the label sizes, add a grid, or do other processing. In a perfect world, I would simply rerun the code generating the plot, and adapt the settings. Alas, the world is not perfect. Therefore, in addition to saving to PDF or PNG, I add:

with open('some_file.pkl', "wb") as fp:
    pickle.dump(fig, fp, protocol=4)

Like this, I can later load the figure object and manipulate the settings as I please.

I also write out the stack with the source-code and locals() dictionary for each function/method in the stack, so that I can later tell exactly what generated the figure.

NB: Be careful, as sometimes this method generates huge files.

You could achieve this without having to import traceback:

try:
    func1()
except Exception as ex:
    trace = []
    tb = ex.__traceback__
    while tb is not None:
        trace.append({
            "filename": tb.tb_frame.f_code.co_filename,
            "name": tb.tb_frame.f_code.co_name,
            "lineno": tb.tb_lineno
        })
        tb = tb.tb_next
    print(str({
        'type': type(ex).__name__,
        'message': str(ex),
        'trace': trace
    }))

Output:

{

  'type': 'ZeroDivisionError',
  'message': 'division by zero',
  'trace': [
    {
      'filename': '/var/playground/main.py',
      'name': '<module>',
      'lineno': 16
    },
    {
      'filename': '/var/playground/main.py',
      'name': 'func1',
      'lineno': 11
    },
    {
      'filename': '/var/playground/main.py',
      'name': 'func2',
      'lineno': 7
    },
    {
      'filename': '/var/playground/my.py',
      'name': 'test',
      'lineno': 2
    }
  ]
}

Try this. I set the blue box to float right, gave left and right a fixed height, and added a white border on the right of the left div. Also added rounded corners to more match your example (These won't work in ie 8 or less). I also took out the position: relative. You don't need it. Block level elements are set to position relative by default.

See it here: http://jsfiddle.net/ZSgLJ/

#left {
  float: left;
  width: 44%;
  margin: 0;
  padding: 0;
  border-right: 1px solid white;
  height:400px;
}

#right {
  position: relative;
  float: right;
  width: 49%;
  margin: 0;
  padding: 0;
  height:400px;
}

#blue_box {
  background-color:blue;
  border-radius: 10px;
  -moz-border-radius:10px;
  -webkit-border-radius: 10px;
  width: 45%;
  min-width: 400px;
  max-width: 600px;
  padding: 2%;
  float: right;
}

However the cmd/batch version works you can run into an issue when you want to define an eventID which is higher then 1000. For event creation with an eventID of 1000+ i'll use powershell like this:

$evt=new-object System.Diagnostics.Eventlog(“Define Logbook”)
$evt.Source=”Define Source”
$evtNumber=Define Eventnumber
$evtDescription=”Define description”
$infoevent=[System.Diagnostics.EventLogEntryType]::Define error level
$evt.WriteEntry($evtDescription,$infoevent,$evtNumber) 

Sample:

$evt=new-object System.Diagnostics.Eventlog(“System”)
$evt.Source=”Tcpip”
$evtNumber=4227
$evtDescription=”This is a Test Event”
$infoevent=[System.Diagnostics.EventLogEntryType]::Warning
$evt.WriteEntry($evtDescription,$infoevent,$evtNumber)

SELECT name 
       FROM gallery 
       WHERE CONVERT(name USING utf8) LIKE _utf8 '%$q%' 
       GROUP BY name COLLATE utf8_general_ci LIMIT 5 

I faced similar issue "CrashLoopBackOff" when I debugged getting pods and logs of pod. Found out that my command arguments are wrong

If you really won't (or can't) use a generic collection instead of your array, Array.Resize is c#'s version of redim preserve:

var  oldA = new [] {1,2,3,4};
Array.Resize(ref oldA,10);
foreach(var i in oldA) Console.WriteLine(i); //1 2 3 4 0 0 0 0 0 0

You are dividing by rr which may be 0.0. Check if rr is zero and do something reasonable other than using it in the denominator.

Try this:

SELECT h.year, h.id, h.rate 
FROM (SELECT h.year, h.id, h.rate, IF(@lastid = (@lastid:=h.id), @index:=@index+1, @index:=0) indx 
      FROM (SELECT h.year, h.id, h.rate 
            FROM h
            WHERE h.year BETWEEN 2000 AND 2009 AND id IN (SELECT rid FROM table2)
            GROUP BY id, h.year
            ORDER BY id, rate DESC
            ) h, (SELECT @lastid:='', @index:=0) AS a
    ) h 
WHERE h.indx <= 5;

To automate this, you could define the foreign key constraint with ON DELETE CASCADE.
I quote the the manual for foreign key constraints:

CASCADE specifies that when a referenced row is deleted, row(s) referencing it should be automatically deleted as well.

Look up the current FK definition like this:

SELECT pg_get_constraintdef(oid) AS constraint_def
FROM   pg_constraint
WHERE  conrelid = 'public.kontakty'::regclass  -- assuming public schema
AND    conname = 'kontakty_ibfk_1';

Then add or modify the ON DELETE ... part to ON DELETE CASCADE (preserving everything else as is) in a statement like:

ALTER TABLE kontakty
   DROP CONSTRAINT kontakty_ibfk_1
 , ADD  CONSTRAINT kontakty_ibfk_1
   FOREIGN KEY (id_osoby) REFERENCES osoby (id_osoby) ON DELETE CASCADE;

There is no ALTER CONSTRAINT command. Drop and recreate the constraint in a single ALTER TABLE statement to avoid possible race conditions with concurrent write access.

You need the privileges to do so, obviously. The operation takes an ACCESS EXCLUSIVE lock on table kontakty and a SHARE ROW EXCLUSIVE lock on table osoby.

If you can't ALTER the table, then deleting by hand (once) or by trigger BEFORE DELETE (every time) are the remaining options.

You're looking for implode()

$string = implode(",", $array);

Working from what you've given I'll assume you want to check that someone has NOT entered any letters other than the ones you've listed. For that to work you want to search for any characters other than those listed:

[^A-Za-z0-9_.]

And use that in a match in your code, something like:

if ( /[^A-Za-z0-9_.]/.match( your_input_string ) ) {
   alert( "you have entered invalid data" );
}

Hows that?

If you have access to the Java 8 Comparable API, Comparable.comparingToInt() may be of use. (See Java 8 Comparable Documentation).

For example, a Comparator<Dog> to sort Dog instances descending by age could be created with the following:

Comparable.comparingToInt(Dog::getDogAge).reversed();

The function take a lambda mapping T to Integer, and creates an ascending comparator. The chained function .reversed() turns the ascending comparator into a descending comparator.

Note: while this may not be useful for most versions of Android out there, I came across this question while searching for similar information for a non-Android Java application. I thought it might be useful to others in the same spot to see what I ended up settling on.

You want java.text.DecimalFormat.

DecimalFormat df = new DecimalFormat("0.00##");
String result = df.format(34.4959);

Dim SourcePath As String = "c:\SomeFolder\SomeFileYouWantToCopy.txt" 'This is just an example string and could be anything, it maps to fileToCopy in your code.
Dim SaveDirectory As string = "c:\DestinationFolder"

Dim Filename As String = System.IO.Path.GetFileName(SourcePath) 'get the filename of the original file without the directory on it
Dim SavePath As String = System.IO.Path.Combine(SaveDirectory, Filename) 'combines the saveDirectory and the filename to get a fully qualified path.

If System.IO.File.Exists(SavePath) Then
   'The file exists
Else
    'the file doesn't exist
End If

Use .map without return in simple way. Also start using let and const instead of var because let and const is more recommended

const rockets = [_x000D_
    { country:'Russia', launches:32 },_x000D_
    { country:'US', launches:23 },_x000D_
    { country:'China', launches:16 },_x000D_
    { country:'Europe(ESA)', launches:7 },_x000D_
    { country:'India', launches:4 },_x000D_
    { country:'Japan', launches:3 }_x000D_
];_x000D_
_x000D_
const launchOptimistic = rockets.map(elem => (_x000D_
  {_x000D_
    country: elem.country,_x000D_
    launches: elem.launches+10_x000D_
  } _x000D_
));_x000D_
_x000D_
console.log(launchOptimistic);

Alternatively:

git push origin +364705c23011b0fc6a7ca2d80c86cef4a7c4db7ac8^:master

Force the master branch of the origin remote repository to the parent of last commit

Your question almost spells the SQL for this:

DELETE FROM table WHERE id IN (1, 4, 6, 7)

What I do in this scenario is create a table variable to hold the Ids.

  Declare @Ids Table (id integer primary Key not null)
  Insert @Ids(id) values (4),(7),(12),(22),(19)

-- (or call another table valued function to generate this table)

Then loop based on the rows in this table

  Declare @Id Integer
  While exists (Select * From @Ids)
    Begin
      Select @Id = Min(id) from @Ids
      exec p_MyInnerProcedure @Id 
      Delete from @Ids Where id = @Id
    End

or...

  Declare @Id Integer = 0 -- assuming all Ids are > 0
  While exists (Select * From @Ids
                where id > @Id)
    Begin
      Select @Id = Min(id) 
      from @Ids Where id > @Id
      exec p_MyInnerProcedure @Id 
    End

Either of above approaches is much faster than a cursor (declared against regular User Table(s)). Table-valued variables have a bad rep because when used improperly, (for very wide tables with large number of rows) they are not performant. But if you are using them only to hold a key value or a 4 byte integer, with a index (as in this case) they are extremely fast.

I've ran into the same issue and these two links solved for me:

The first one is this one: How do I retrieve the logged in Google account on android phones?

Which presents the code for retrieving the accounts associated with the phone. Basically you will need something like this:

AccountManager manager = (AccountManager) getSystemService(ACCOUNT_SERVICE);
Account[] list = manager.getAccounts();

And to add the permissions in the AndroidManifest.xml

<uses-permission android:name="android.permission.GET_ACCOUNTS"></uses-permission>
<uses-permission android:name="android.permission.AUTHENTICATE_ACCOUNTS"></uses-permission>

Additionally, if you are using the Emulator the following link will help you to set it up with an account : Android Emulator - Trouble creating user accounts

Basically, it says that you must create an android device based on a API Level and not the SDK Version (like is usually done).

If you don't have the -T option for dmesg as for example on Andoid, you can use the busybox version. The following solves also some other issues:

1. The [0.0000] format is preceded by something that looks like misplaced color information, prefixes like <6>.
2. Make integers from floats.

It is inspired by this blog post.

#!/bin/sh                                                                                                               
# Translate dmesg timestamps to human readable format                                                                   

# uptime in seconds                                                                                                     
uptime=$(cut -d " " -f 1 /proc/uptime)                                                                                  

# remove fraction                                                                                                       
uptime=$(echo $uptime | cut -d "." -f1)                                                                                 

# run only if timestamps are enabled                                                                                    
if [ "Y" = "$(cat /sys/module/printk/parameters/time)" ]; then                                                          
  dmesg | sed "s/[^\[]*\[/\[/" | sed "s/^\[[ ]*\?\([0-9.]*\)\] \(.*\)/\\1 \\2/" | while read timestamp message; do      
    timestamp=$(echo $timestamp | cut -d "." -f1)                                                                       
    ts1=$(( $(busybox date +%s) - $uptime + $timestamp ))                                                               
    ts2=$(busybox date -d "@${ts1}")                                                                                    
    printf "[%s] %s\n" "$ts2" "$message"                                                                                
  done                                                                                                                  
else                                                                                                                    
  echo "Timestamps are disabled (/sys/module/printk/parameters/time)"                                                   
fi                                                                                                                      

Note, however, that this implementation is quite slow.

However, There is one more way to check the object in jQuery.

jQuery.type(a); //this returns type of variable.

I have made example to understand things, jsfiddle link

in iterm2

fn + leftArraw or fn + rightArrow

this worked for me

Yeah, you can't constrain the iframe itself with height and width. You should put a div around it. If you control the content in the iframe, you can put some JS within the iframe content that will tell the parent to scroll the div when the touch event is received.

like this:

The JS:

setTimeout(function () {
var startY = 0;
var startX = 0;
var b = document.body;
b.addEventListener('touchstart', function (event) {
    parent.window.scrollTo(0, 1);
    startY = event.targetTouches[0].pageY;
    startX = event.targetTouches[0].pageX;
});
b.addEventListener('touchmove', function (event) {
    event.preventDefault();
    var posy = event.targetTouches[0].pageY;
    var h = parent.document.getElementById("scroller");
    var sty = h.scrollTop;

    var posx = event.targetTouches[0].pageX;
    var stx = h.scrollLeft;
    h.scrollTop = sty - (posy - startY);
    h.scrollLeft = stx - (posx - startX);
    startY = posy;
    startX = posx;
});
}, 1000);

The HTML:

<div id="scroller" style="height: 400px; width: 100%; overflow: auto;">
<iframe height="100%" id="iframe" scrolling="no" width="100%" id="iframe" src="url" />
</div>

If you don't control the iframe content, you can use an overlay over the iframe in a similar manner, but then you can't interact with the iframe contents other than to scroll it - so you can't, for example, click links in the iframe.

It used to be that you could use two fingers to scroll within an iframe, but that doesn't work anymore.

Update: iOS 6 broke this solution for us. I've been attempting to get a new fix for it, but nothing has worked yet. In addition, it is no longer possible to debug javascript on the device since they introduced Remote Web Inspector, which requires a Mac to use.

A simple example to show a toast after 3 seconds :

fun onBtnClick() {
    val handler = Handler()
    handler.postDelayed({ showToast() }, 3000)
}

fun showToast(){
    Toast.makeText(context, "Its toast!", Toast.LENGTH_SHORT).show()
}

For those who are getting the "Unable to resolve dependencies" error:
Toggle "Offline Mode" off
('View'->Tool Windows->Gradle)

Using -replace

 $string = '% O0033(SUB RAD MSD 50R III) G91G1X-6.4Z-2.F500 G3I6.4Z-8.G3I6.4 G3R3.2X6.4F500 G91G0Z5. G91G1X-10.4 G3I10.4 G3R5.2X10.4 G90G0Z2. M99 %'
 $program = $string -replace '^%\sO\d{4}\((.+?)\).+$','$1'
 $program

SUB RAD MSD 50R III

I'll Explain how to add an image using Android studio(2.3.3). First you need to add the image into res/drawable folder in the project. Like below

Now in go to activity_main.xml (or any activity you need to add image) and select the Design view. There you can see your Palette tool box on left side. You need to drag and drop ImageView.

It will prompt you Resources dialog box. In there select Drawable under the project section you can see your image. Like below

Select the image you want press Ok you can see the image on the Design view. If you want it configure using xml it would look like below.

<ImageView
        android:id="@+id/imageView"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        app:srcCompat="@drawable/homepage"
        tools:layout_editor_absoluteX="55dp"
        tools:layout_editor_absoluteY="130dp" />

You need to give image location using

app:srcCompat="@drawable/imagename"

You can now use json.net. Just go on Nuget and install it.

And you can do something like this:

    public bool Equals(SamplesItem sampleToCompare)
    {
        string myself = JsonConvert.SerializeObject(this);
        string other = JsonConvert.SerializeObject(sampleToCompare);

        return myself == other;
    }

You could perhaps make a extension method for object if you wanted to get fancier. Please note this only compares the public properties. And if you wanted to ignore a public property when you do the comparison you could use the [JsonIgnore] attribute.

You could also check the request accept content type as specified in the rfc. That way you can render by default HTML and where your client accept application/jason you can return json in your response without a template being required

I had the same issue. My problem was it was missing “-Dfile.encoding=UTF8” argument under the JAVA_OPTION in statWeblogic.cmd file in WebLogic server.

This error happens to me when I am pushing my commit and my computer hangs. This is how I've fix it.

Steps to fix

git status

show the empty/corrupt object file

rm .git/objects/08/3834cb34d155e67a8930604d57d3d302d7ec12

remove it

git status

I got fatal: bad object HEAD message

rm .git/index

I remove the index for the reset

git reset

fatal: Could not parse object 'HEAD'.

git status
git pull

just to check whats happening

tail -n 2 .git/logs/refs/heads/MY-CURRENT-BRANCH

prints the last 2 lines tail -n 2 of log branch to show my last 2 commit hash

git update-ref HEAD 7221fa02cb627470db163826da4265609aba47b2

I pick the last commit hash

git status

shows all my file as deleted because i removed the .git/index file

git reset

continue to the reset

git status

verify my fix

Note: The steps starts when I landed on this question and used the answers as reference.

For reference: these are the required DLLs for Visual Studio 2017 (as did @ijprest for the VS 2010)

TF.exe
TF.exe.config
Microsoft.TeamFoundation.Client.dll
Microsoft.TeamFoundation.Common.dll
Microsoft.TeamFoundation.Core.WebApi.dll
Microsoft.TeamFoundation.VersionControl.Client.dll
Microsoft.TeamFoundation.VersionControl.Common.dll
Microsoft.TeamFoundation.VersionControl.Controls.dll
Microsoft.VisualStudio.Services.Client.Interactive.dll
Microsoft.VisualStudio.Services.Common.dll
Microsoft.VisualStudio.Services.WebApi.dll

They will be in my base VM image. I'm going to use it to pull the latest deployment scripts from VC to a temporary local workspace folder when installing a new server.

tf workspace /new ... 
tf workfold /map ...
tf get "%WorkSpaceLocalFolder%" /recursive
tf workfold /unmap 
tf workspace /delete

<run deployment scripts from "%WorkSpaceLocalFolder%" >

rmdir "%WorkSpaceLocalFolder%"

(Sorry to post this as an answer, but I don't have enough reputation to comment, which I believe it should have been)

I recently came up with a much simpler way to post a JSON, with the additional step of converting from a model in my app. Note that you have to make the model [JsonObject] for your controller to get the values and do the conversion.

Request:

 var model = new MyModel(); 

 using (var client = new HttpClient())
 {
     var uri = new Uri("XXXXXXXXX"); 
     var json = new JavaScriptSerializer().Serialize(model);
     var stringContent = new StringContent(json, Encoding.UTF8, "application/json");
     var response = await Client.PutAsync(uri,stringContent).Result;
     ...
     ...
  }

Model:

[JsonObject]
[Serializable]
public class MyModel
{
    public Decimal Value { get; set; }
    public string Project { get; set; }
    public string FilePath { get; set; }
    public string FileName { get; set; }
}

Server side:

[HttpPut]     
public async Task<HttpResponseMessage> PutApi([FromBody]MyModel model)
{
    ...
    ... 
}

Most of the time req.body is undefined due to missing JSON parser

const express = require('express');
app.use(express.json());

could be missing for the body-parser

const bodyParser  = require('body-parser');
app.use(bodyParser.urlencoded({extended: true}));

and sometimes it's undefined due to cros origin so add them

const cors = require('cors');
app.use(cors())