this is how I implement it .

let dictionary = self.convertStringToDictionary(responceString)            
     NotificationCenter.default.post(name: NSNotification.Name(rawValue: "SOCKET_UPDATE"), object: dictionary)

Swift 5.1 Custom Object/Type

// MARK: - NotificationName
// Extending notification name to avoid string errors.
extension Notification.Name {
    static let yourNotificationName = Notification.Name("yourNotificationName")
}


// MARK: - CustomObject
class YourCustomObject {
    // Any stuffs you would like to set in your custom object as always.
    init() {}
}

// MARK: - Notification Sender Class
class NotificatioSenderClass {

     // Just grab the content of this function and put it to your function responsible for triggering a notification.
    func postNotification(){
        // Note: - This is the important part pass your object instance as object parameter.
        let yourObjectInstance = YourCustomObject()
        NotificationCenter.default.post(name: .yourNotificationName, object: yourObjectInstance)
    }
}

// MARK: -Notification  Receiver class
class NotificationReceiverClass: UIViewController {
    // MARK: - ViewController Lifecycle
    override func viewDidLoad() {
        super.viewDidLoad()
        // Register your notification listener
        NotificationCenter.default.addObserver(self, selector: #selector(didReceiveNotificationWithCustomObject), name: .yourNotificationName, object: nil)
    }

    // MARK: - Helpers
    @objc private func didReceiveNotificationWithCustomObject(notification: Notification){
        // Important: - Grab your custom object here by casting the notification object.
        guard let yourPassedObject = notification.object as? YourCustomObject else {return}
        // That's it now you can use your custom object
        //
        //

    }
      // MARK: - Deinit
  deinit {
      // Save your memory by releasing notification listener
      NotificationCenter.default.removeObserver(self, name: .yourNotificationName, object: nil)
    }




}

You can only select columns that are in the group or used in an aggregate function. You can use a join to get this working

select s1.* 
from sensorTable s1
inner join 
(
  SELECT sensorID, max(timestamp) as mts
  FROM sensorTable 
  GROUP BY sensorID 
) s2 on s2.sensorID = s1.sensorID and s1.timestamp = s2.mts

To set the use of scientific notation in your entire R session, you can use the scipen option. From the documentation (?options):

‘scipen’: integer.  A penalty to be applied when deciding to print
          numeric values in fixed or exponential notation.  Positive
          values bias towards fixed and negative towards scientific
          notation: fixed notation will be preferred unless it is more
          than ‘scipen’ digits wider.

So in essence this value determines how likely it is that scientific notation will be triggered. So to prevent scientific notation, simply use a large positive value like 999:

options(scipen=999)

You should return only one column and one row in the where query where you assign the returned value to a variable. Example:

select * from table1 where Date in (select * from Dates) -- Wrong
select * from table1 where Date in (select Column1,Column2 from Dates) -- Wrong
select * from table1 where Date in (select Column1 from Dates) -- OK

The other answers didn't work for me. This did:

    <div class="span6">
      <h2>Document</h2>
        </p>
        <textarea class="field span12" id="textarea" rows="6" placeholder="Enter a short synopsis"></textarea>
        <button class="btn">Upload</button>
    </div>

Note the span12 in a div with span6.

Try this

function readRows() {
  var sheet = SpreadsheetApp.getActiveSheet();
  var rows = sheet.getDataRange();
  var numRows = rows.getNumRows();
  //var values = rows.getValues();

  var Names = sheet.getRange("A2:A7");
  var Name = [
    Names.getCell(1, 1).getValue(),
    Names.getCell(2, 1).getValue(),
    .....
    Names.getCell(5, 1).getValue()]

You can define arrays simply as follows, instead of allocating and then assigning.

var arr = [1,2,3,5]

Your initial error was because of the following line, and ones like it

var Name[0] = Name_cell.getValue(); 

Since Name is already defined and you are assigning the values to its elements, you should skip the var, so just

Name[0] = Name_cell.getValue();

Pro tip: For most issues that, like this one, don't directly involve Google services, you are better off Googling for the way to do it in javascript in general.

Read carefully the warning message :

The POM for org.raml:jaxrs-code-generator:jar:2.0.0 is missing, no dependency information available

The problem is not the jar, but the pom.xml that is missing.
The pom.xml lists the required dependencies for this jar that Maven will pull during the build and overall the packaging of your application. So, you may really need it.

Note that this problem may of course occur for other Maven dependencies and the ideas to solve that is always the same.

The Mule website documents very well that in addition to some information related to.

How to solve ?

1) Quick workaround : looking for in the internet the pom.xml of the artifact

Googling the artifact id, the group id and its version gives generally interesting results : maven repository links to download it.
In the case of the org.raml:jaxrs-code-generator:jar:2.0.0 dependency, you can download the pom.xml from the Maven mule repository :

https://repository.mulesoft.org/nexus/content/repositories/releases/org/raml/jaxrs-code-generator/2.0.0/

2) Clean workaround for a single Maven project : adding the repository declaration in your pom.

In your case, add the Maven mule repositories :

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>
    ...
    <repositories>
        <repository>
            <id>mulesoft-releases</id>
            <name>MuleSoft Repository</name>
            <url>http://repository.mulesoft.org/releases/</url>
            <layout>default</layout>
        </repository>
        <repository>
            <id>mulesoft-snapshots</id>
            <name>MuleSoft Snapshot Repository</name>
            <url>http://repository.mulesoft.org/snapshots/</url>
            <layout>default</layout>
        </repository>
    </repositories>
    ...
</project>

3) Clean workaround for any Maven projects : add the repository declaration in your settings.xml

 <profile> 
   <repositories>
    ...
    <repository>
      <id>mulesoft-releases</id>
      <name>MuleSoft Repository</name>
      <url>http://repository.mulesoft.org/releases/</url>
      <layout>default</layout>
    </repository>
    <repository>
      <id>mulesoft-snapshots</id>
      <name>MuleSoft Snapshot Repository</name>
      <url>http://repository.mulesoft.org/snapshots/</url>
      <layout>default</layout>
    </repository>
     ...
  </repositories>     
</profile>

Note that in some rare cases, the pom.xml declaring the dependencies is nowhere. So, you have to identify yourself whether the artifact requires dependencies.

In my case there was a mismatch between the build path JRE and installed JRE on execution environment. I moved into Project > Properties > Java compiler. There was a warning message at the bottom.

I clicked on the links 'Installed JRE', 'Execution environment', 'Java build path' and changed the JDK version to 1.7 and the warning disappeared.

The mysql_list_fields function might interest you ; but, as the manual states :

This function is deprecated. It is preferable to use mysql_query() to issue a SQL SHOW COLUMNS FROM table [LIKE 'name'] statement instead.

I would suggest using wire shark to trace packets. If you are using Ubuntu, sudo-apt get wireshark. Like Joni stated the only way to figure out whats going wrong is to follow the GET requests and their associated responses.

http://www.wireshark.org/download.html

GROUP BY CONCAT(col1, '_', col2)

for more exactly positioning:

      background-position: bottom 5px right 7px;

Just @OneToMany(cascade = CascadeType.ALL, mappedBy = "xxx", fetch = FetchType.LAZY, orphanRemoval = true).

Remove targetEntity = MyClass.class, it works great.

If you want a specific margin e.g. 20px, you can put the table inside a div.

<div id="tableDiv">
    <table>
      <tr>
        <th> test heading </th>
      </tr>
      <tr>
        <td> test data </td>
      </tr>
    </table>
</div>

So the #tableDiv has a margin of 20px but the table itself has a width of 100%, forcing the table to be the full width except for the margin on either sides.

#tableDiv {
  margin: 20px;
}

table {
  width: 100%;
}

• Right click your project in Solution Explorer and select Properties from the menu
• Go to Configuration Properties -> Debugging
• Set the Command Arguments in the property list.

I am running Ubuntu 19.04 and followed all the instructions above and then some. Finally, what worked for me was to run

sudo apt autoremove rvm

and now when I try and reinstall RVM it's actually gone. RVM is invasive, to say the least.

Whevever you get a problem like this just go to the man page for the function in question and it will tell you what header you are missing, e.g.

$ man memset

MEMSET(3)                BSD Library Functions Manual                MEMSET(3)

NAME
     memset -- fill a byte string with a byte value

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <string.h>

     void *
     memset(void *b, int c, size_t len);

Note that for C++ it's generally preferable to use the proper equivalent C++ headers, <cstring>/<cstdio>/<cstdlib>/etc, rather than C's <string.h>/<stdio.h>/<stdlib.h>/etc.

Explanation:

This problem occurs because Chrome allows up to 6 open connections by default. So if you're streaming multiple media files simultaneously from 6 <video> or <audio> tags, the 7th connection (for example, an image) will just hang, until one of the sockets opens up. Usually, an open connection will close after 5 minutes of inactivity, and that's why you're seeing your .pngs finally loading at that point.

Solution 1:

You can avoid this by minimizing the number of media tags that keep an open connection. And if you need to have more than 6, make sure that you load them last, or that they don't have attributes like preload="auto".

Solution 2:

If you're trying to use multiple sound effects for a web game, you could use the Web Audio API. Or to simplify things, just use a library like SoundJS, which is a great tool for playing a large amount of sound effects / music tracks simultaneously.

Solution 3: Force-open Sockets (Not recommended)

If you must, you can force-open the sockets in your browser (In Chrome only):

1. Go to the address bar and type chrome://net-internals.
2. Select Sockets from the menu.
3. Click on the Flush socket pools button.

This solution is not recommended because you shouldn't expect your visitors to follow these instructions to be able to view your site.

You are looking to see if a single value is in an array. Use in_array.

However note that case is important, as are any leading or trailing spaces. Use var_dump to find out the length of the strings too, and see if they fit.

To handle Android Volley Timeout you need to use RetryPolicy

RetryPolicy

• Volley provides an easy way to implement your RetryPolicy for your requests.
• Volley sets default Socket & ConnectionTImeout to 5 secs for all requests.

RetryPolicy is an interface where you need to implement your logic of how you want to retry a particular request when a timeout happens.

It deals with these three parameters

• Timeout - Specifies Socket Timeout in millis per every retry attempt.
• Number Of Retries - Number of times retry is attempted.
• Back Off Multiplier - A multiplier which is used to determine exponential time set to socket for every retry attempt.

For ex. If RetryPolicy is created with these values

Timeout - 3000 ms, Num of Retry Attempts - 2, Back Off Multiplier - 2.0

Retry Attempt 1:

• time = time + (time * Back Off Multiplier);
• time = 3000 + 6000 = 9000ms
• Socket Timeout = time;
• Request dispatched with Socket Timeout of 9 Secs

Retry Attempt 2:

• time = time + (time * Back Off Multiplier);
• time = 9000 + 18000 = 27000ms
• Socket Timeout = time;
• Request dispatched with Socket Timeout of 27 Secs

So at the end of Retry Attempt 2 if still Socket Timeout happens Volley would throw a TimeoutError in your UI Error response handler.

//Set a retry policy in case of SocketTimeout & ConnectionTimeout Exceptions. 
//Volley does retry for you if you have specified the policy.
jsonObjRequest.setRetryPolicy(new DefaultRetryPolicy(5000, 
                DefaultRetryPolicy.DEFAULT_MAX_RETRIES, 
                DefaultRetryPolicy.DEFAULT_BACKOFF_MULT));

I had to do something similar, trying to convert a string of numbers into a timespan by adding in : and .. Basically I was taking 235959999 and needing to convert it to 23:59:59.999. For me it was easy because I knew where I needed to "insert" said characters.

ts = ts.Insert(6,".");
ts = ts.Insert(4,":");
ts = ts.Insert(2,":");

Basically reassigning ts to itself with the inserted character. I worked my way from the back to front, because I was lazy and didn't want to do additional math for the other inserted characters.

You could try something similar by doing:

alpha = alpha.Insert(5,"-");
alpha = alpha.Insert(11,"-"); //add 1 to account for 1 -
alpha = alpha.Insert(17,"-"); //add 2 to account for 2 -
...

Using [String.indexOf][1]

var stringToMatch = "XYZ 123 ABC 456 ABC 789 ABC";

function yetAnotherGetNthOccurance(string, seek, occurance) {
    var index = 0, i = 1;

    while (index !== -1) {
        index = string.indexOf(seek, index + 1);
        if (occurance === i) {
           break;
        }
        i++;
    }
    if (index !== -1) {
        console.log('Occurance found in ' + index + ' position');
    }
    else if (index === -1 && i !== occurance) {
        console.log('Occurance not found in ' + occurance + ' position');
    }
    else {
        console.log('Occurance not found');
    }
}

yetAnotherGetNthOccurance(stringToMatch, 'ABC', 2);

// Output: Occurance found in 16 position

yetAnotherGetNthOccurance(stringToMatch, 'ABC', 20);

// Output: Occurance not found in 20 position

yetAnotherGetNthOccurance(stringToMatch, 'ZAB', 1)

// Output: Occurance not found

There is another way to convert Python scripts to .exe files. You can compile Python programs into C++ programs, which can be natively compiled just like any other C++ program.

To have the IT department selected, when the departments are loaded from tblDepartment table, use the following overloaded constructor of SelectList class. Notice that we are passing a value of 1 for selectedValue parameter.

ViewBag.Departments = new SelectList(db.Departments, "Id", "Name", "1");

Try this:

$("#autoship_option option[selected]").removeAttr("selected");

You can also use http://schemas.android.com/apk/res-auto that would take care of it automatically. Use it like this:

xmlns:ads="http://schemas.android.com/apk/res-auto"

you can use slice() it returens charcters between start to end (included end point)

   string.slice(start , end);

here is some exmp to show how it works:

var mystr = ("data-123").slice(5); // jast define start point so output is "123"
var mystr = ("data-123").slice(5,7); // define start and end  so output is "12"
var mystr=(",246").slice(1); // returens "246"

Demo

In case anyone is looking for recursive.

<?php

echo scanDirectoryImages("images");

/**
 * Recursively search through directory for images and display them
 * 
 * @param  array  $exts
 * @param  string $directory
 * @return string
 */
function scanDirectoryImages($directory, array $exts = array('jpeg', 'jpg', 'gif', 'png'))
{
    if (substr($directory, -1) == '/') {
        $directory = substr($directory, 0, -1);
    }
    $html = '';
    if (
        is_readable($directory)
        && (file_exists($directory) || is_dir($directory))
    ) {
        $directoryList = opendir($directory);
        while($file = readdir($directoryList)) {
            if ($file != '.' && $file != '..') {
                $path = $directory . '/' . $file;
                if (is_readable($path)) {
                    if (is_dir($path)) {
                        return scanDirectoryImages($path, $exts);
                    }
                    if (
                        is_file($path)
                        && in_array(end(explode('.', end(explode('/', $path)))), $exts)
                    ) {
                        $html .= '<a href="' . $path . '"><img src="' . $path
                            . '" style="max-height:100px;max-width:100px" /></a>';
                    }
                }
            }
        }
        closedir($directoryList);
    }
    return $html;
}

If you are in a browser environment you can also use btoa.

btoa is a function which takes a string as argument and produces a Base64 encoded ASCII string. Its supported by 97% of browsers.

Example:

> "Basic " + btoa("billy"+":"+"secretpassword")
< "Basic YmlsbHk6c2VjcmV0cGFzc3dvcmQ="

You can then add Basic YmlsbHk6c2VjcmV0cGFzc3dvcmQ= to the authorization header.

Note that the usual caveats about HTTP BASIC auth apply, most importantly if you do not send your traffic over https an eavesdropped can simply decode the Base64 encoded string thus obtaining your password.

This security.stackexchange.com answer gives a good overview of some of the downsides.

The debug module could really use some love, but at the moment the best you can do is use this:

- hosts: all
  gather_facts: no
  tasks:
    - shell: ps -eo pcpu,user,args | sort -r -k1 | head -n5
      register: ps

    - debug: var=ps.stdout_lines

It gives an output like this:

ok: [host1] => {
    "ps.stdout_lines": [
        "%CPU USER     COMMAND",
        " 1.0 root     /usr/bin/python",
        " 0.6 root     sshd: root@notty ",
        " 0.2 root     java",
        " 0.0 root     sort -r -k1"
    ]
}
ok: [host2] => {
    "ps.stdout_lines": [
        "%CPU USER     COMMAND",
        " 4.0 root     /usr/bin/python",
        " 0.6 root     sshd: root@notty ",
        " 0.1 root     java",
        " 0.0 root     sort -r -k1"
    ]
}

USE this code

function openBackWindow(url,popName){
        var popupWindow = window.open(url,popName,'scrollbars=1,height=650,width=1050');
          if($.browser.msie){
            popupWindow.blur();
            window.focus();
        }else{
           blurPopunder();
        }
      };

    function blurPopunder() {
            var winBlankPopup = window.open("about:blank");
            if (winBlankPopup) {
                winBlankPopup.focus();
                winBlankPopup.close()
            }
    };

IT works fine in Mozilla,IE and chrome on and less than 22 version; but doesn't work in Opera and Safari.

I just think the whole example would be useful. This is the example for this problem.

using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.ServiceModel.Web;
using System.Runtime.Serialization;
using System.Runtime.Serialization.Json;
using System.IO;
using System.Text;
using System.Collections.Generic;

public partial class _Default : System.Web.UI.Page
{
    protected void Page_Load(object sender, EventArgs e)
    {
        GoogleSearchResults g1 = new GoogleSearchResults();
        const string json = @"{""responseData"": {""results"":[{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.cheese.com/"",""url"":""http://www.cheese.com/"",""visibleUrl"":""www.cheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:bkg1gwNt8u4J:www.cheese.com"",""title"":""\u003cb\u003eCHEESE\u003c/b\u003e.COM - All about \u003cb\u003echeese\u003c/b\u003e!."",""titleNoFormatting"":""CHEESE.COM - All about cheese!."",""content"":""\u003cb\u003eCheese\u003c/b\u003e - everything you want to know about it. Search \u003cb\u003echeese\u003c/b\u003e by name, by types   of milk, by textures and by countries.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://en.wikipedia.org/wiki/Cheese"",""url"":""http://en.wikipedia.org/wiki/Cheese"",""visibleUrl"":""en.wikipedia.org"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:n9icdgMlCXIJ:en.wikipedia.org"",""title"":""\u003cb\u003eCheese\u003c/b\u003e - Wikipedia, the free encyclopedia"",""titleNoFormatting"":""Cheese - Wikipedia, the free encyclopedia"",""content"":""\u003cb\u003eCheese\u003c/b\u003e is a food consisting of proteins and fat from milk, usually the milk of   cows, buffalo, goats, or sheep. It is produced by coagulation of the milk \u003cb\u003e...\u003c/b\u003e""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.ilovecheese.com/"",""url"":""http://www.ilovecheese.com/"",""visibleUrl"":""www.ilovecheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:GBhRR8ytMhQJ:www.ilovecheese.com"",""title"":""I Love \u003cb\u003eCheese\u003c/b\u003e!, Homepage"",""titleNoFormatting"":""I Love Cheese!, Homepage"",""content"":""The American Dairy Association\u0026#39;s official site includes recipes and information   on nutrition and storage of \u003cb\u003echeese\u003c/b\u003e.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.gnome.org/projects/cheese/"",""url"":""http://www.gnome.org/projects/cheese/"",""visibleUrl"":""www.gnome.org"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:jvfWnVcSFeQJ:www.gnome.org"",""title"":""\u003cb\u003eCheese\u003c/b\u003e"",""titleNoFormatting"":""Cheese"",""content"":""\u003cb\u003eCheese\u003c/b\u003e uses your webcam to take photos and videos, applies fancy special effects   and lets you share the fun with others. It was written as part of Google\u0026#39;s \u003cb\u003e...\u003c/b\u003e""}],""cursor"":{""pages"":[{""start"":""0"",""label"":1},{""start"":""4"",""label"":2},{""start"":""8"",""label"":3},{""start"":""12"",""label"":4},{""start"":""16"",""label"":5},{""start"":""20"",""label"":6},{""start"":""24"",""label"":7},{""start"":""28"",""label"":8}],""estimatedResultCount"":""14400000"",""currentPageIndex"":0,""moreResultsUrl"":""http://www.google.com/search?oe\u003dutf8\u0026ie\u003dutf8\u0026source\u003duds\u0026start\u003d0\u0026hl\u003den-GB\u0026q\u003dcheese""}}, ""responseDetails"": null, ""responseStatus"": 200}";
        g1 = JSONHelper.Deserialise<GoogleSearchResults>(json);

        foreach (Pages x in g1.responseData.cursor.pages)
        {
            // Anything you want to get
            Response.Write(x.label);

        }
    }
}

public class JSONHelper
{
    public static T Deserialise<T>(string json)
    {
        using (var ms = new MemoryStream(Encoding.Unicode.GetBytes(json)))
        {
            var serialiser = new DataContractJsonSerializer(typeof(T));
            return (T)serialiser.ReadObject(ms);
        }
    }

    public static string Serialize<T>(T obj)
    {
        DataContractJsonSerializer serializer = new DataContractJsonSerializer(obj.GetType());
        using (MemoryStream ms = new MemoryStream())
        {
            serializer.WriteObject(ms, obj);
            return Encoding.Default.GetString(ms.ToArray());
        }
    }
}

[DataContract]
public class GoogleSearchResults
{
    [DataMember]
    public ResponseData responseData { get; set; }

    [DataMember]
    public string responseStatus { get; set; }

}


public class ResponseData
{
    [DataMember]
    public Cursor cursor { get; set; }

    [DataMember]
    public IEnumerable<Results> results { get; set; }


}


[DataContract]
public class Cursor
{
    [DataMember]
    public IEnumerable<Pages> pages { get; set; }
}



[DataContract]
public class Pages
{
    [DataMember]
    public string start { get; set; }

    [DataMember]
    public string label { get; set; }

}


[DataContract]
public class Results
{
    [DataMember]
    public string unescapedUrl { get; set; }

    [DataMember]
    public string url { get; set; }

    [DataMember]
    public string visibleUrl { get; set; }

    [DataMember]
    public string cacheUrl { get; set; }

    [DataMember]
    public string title { get; set; }

    [DataMember]
    public string titleNoFormatting { get; set; }

    [DataMember]
    public string content { get; set; }
}

If you are running via the IDE, running as administrator should help. To do this locate the Visual Studio 2008/10 application icon, right click it and select "Run as administrator"

You can do some what like this

vector <int> id;
vector <double> v;

if(id.size() > 0)
{
    for(int i = 0; i < id.size(); i++)
    {
        for(int j = 0; j < id.size(); j++)
        {
            double x = v[i][j];
            cout << x << endl;
        }
    }
}

Runas.exe won't work here. You can use VBScript to invoke the "Run as Administrator" shell verb. The Elevation Powertoys contain a batchfile that allows you to invoke an elevated command:

elevatecmd.exe

http://blogs.technet.com/b/elevationpowertoys/

First of all my Search query value is from a user's input. I have tried all the answers on this one and all the results Google have given me, 90% of the answers says put '%''%' and the other 10% says a more complicated answers.

For some reason all of those did not work for me.

How ever I remembered that in MySQL (phpmyadmin) there is this built in search function so I tried it just to see how MySQL handles a search with an apostrophe, turns out MySQL just escaping apostrophe with a backslash LIKE '%\'%' so why just I replace apostrophe with a \' in every user's query.

This is what I come up with:

if(!empty($user_search)) {
        $r_user_search = str_ireplace("'","\'","$user_search");
        $find_it = "SELECT * FROM table WHERE column LIKE '%$r_user_search%'";
        $results = $pdo->prepare($find_it);
        $results->execute();

This solves my problem. Also please correct me if this is still has security issues.

In my case, I found that a computed column had been added to the "included columns" of an index. Later, when an item in that table was updated, the merge statement failed with that message. The merge was in a trigger, so this was hard to track down! Removing the computed column from the index fixed it.

After

brew uninstall node

I had to know which node

which node

then remove that

rm -rf /usr/local/bin/node

My approach to this problem was a little different than what I see here, so I'll share.

1. (Make a copy of your data first)
2. Concatenate the columns
3. Remove duplicates on the concatenated column
4. Last - pivot on the resulting set

Note: I would like to include images to make this even easier to understand but cant because this is my first post ;)

Once you have parsed the timestamp string and have a time object (see other answers for details), you can use Time.to_formatted_s from Rails. It has several formats built in that you can specify with symbols.

Quote:

time = Time.now                     # => Thu Jan 18 06:10:17 CST 2007

time.to_formatted_s(:time)          # => "06:10"
time.to_s(:time)                    # => "06:10"

time.to_formatted_s(:db)            # => "2007-01-18 06:10:17"
time.to_formatted_s(:number)        # => "20070118061017"
time.to_formatted_s(:short)         # => "18 Jan 06:10"
time.to_formatted_s(:long)          # => "January 18, 2007 06:10"
time.to_formatted_s(:long_ordinal)  # => "January 18th, 2007 06:10"
time.to_formatted_s(:rfc822)        # => "Thu, 18 Jan 2007 06:10:17 -0600"

(Time.to_s is an alias)

You can also define your own formats - usually in an initializer (Thanks to Dave Newton for pointing this out). This is how it's done:

# config/initializers/time_formats.rb
Time::DATE_FORMATS[:month_and_year] = "%B %Y"
Time::DATE_FORMATS[:short_ordinal] = lambda { |time| time.strftime("%B #{time.day.ordinalize}") }

Make sure the following:

1. Proper "war" file structure i.e. WEB-INF & META-INF
2. "web.xml" file is setup correct.
3. Last and important: private static final long serialVersionUID = 1L; should be there in your class (<servlet-class>MyClass</servlet-class>).

var logged_in = false;
logged_in = !logged_in;

A little example:

var logged_in = false;_x000D_
_x000D_
_x000D_
$("#enable").click(function() {_x000D_
    logged_in = !logged_in;_x000D_
    checkLogin();_x000D_
});_x000D_
_x000D_
function checkLogin(){_x000D_
    if (logged_in)_x000D_
        $("#id_test").removeClass("test").addClass("test_hidde");_x000D_
    else_x000D_
        $("#id_test").removeClass("test_hidde").addClass("test");_x000D_
    $("#id_test").text($("#id_test").text()+', '+logged_in);_x000D_
}

.test{_x000D_
    color: red;_x000D_
    font-size: 16px;_x000D_
    width: 100000px_x000D_
}_x000D_
_x000D_
.test_hidde{_x000D_
    color: #000;_x000D_
    font-size: 26px;_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<div class="test" id="id_test">Some Content...</div>_x000D_
<div style="display: none" id="id_test">Some Other Content...</div>_x000D_
_x000D_
_x000D_
<div>_x000D_
    <button id="enable">Edit</button>_x000D_
</div>

Here you go. Just specify the chars you want to allow on the first line.

char[] chars = "abcdefghijklmnopqrstuvwxyz".toCharArray();
StringBuilder sb = new StringBuilder(20);
Random random = new Random();
for (int i = 0; i < 20; i++) {
    char c = chars[random.nextInt(chars.length)];
    sb.append(c);
}
String output = sb.toString();
System.out.println(output);

If you are using this to generate something sensitive like a password reset URL or session ID cookie or temporary password reset, be sure to use java.security.SecureRandom instead. Values produced by java.util.Random and java.util.concurrent.ThreadLocalRandom are mathematically predictable.

You need to use the TO_DATE function.

SELECT TO_DATE('01/01/2004', 'MM/DD/YYYY') FROM DUAL;

This is one of the simplest ways to sort record by Date:

SELECT  `Article_Id` ,  `Title` ,  `Source_Link` ,  `Content` ,  `Source` , `Reg_Date`, UNIX_TIMESTAMP(  `Reg_Date` ) AS DATE
FROM article
ORDER BY DATE DESC 

Verify that you can start your application like that:

java -cp myjarfile.jar snake.Controller

I just read when I double click on it - this sounds like a configuration issue with your operating system. You're double-clicking the file on a windows explorer window? Try to run it from a console/terminal with the command

java -jar myjarfile.jar

Further Reading

• Running JAR file on Windows

The manifest has to end with a new line. Please check your file, a missing new line will cause trouble.

drop database <db_name>;
FLUSH PRIVILEGES;

This question is very helpfully BUT Don't forget to mount SD Card in your emulator, if you don't do this its doesn't work.

I lose my time before discover this.

Yes. 'Z' stands for Zulu time, which is also GMT and UTC.

From http://en.wikipedia.org/wiki/Coordinated_Universal_Time:

The UTC time zone is sometimes denoted by the letter Z—a reference to the equivalent nautical time zone (GMT), which has been denoted by a Z since about 1950. The letter also refers to the "zone description" of zero hours, which has been used since 1920 (see time zone history). Since the NATO phonetic alphabet and amateur radio word for Z is "Zulu", UTC is sometimes known as Zulu time.

Technically, because the definition of nautical time zones is based on longitudinal position, the Z time is not exactly identical to the actual GMT time 'zone'. However, since it is primarily used as a reference time, it doesn't matter what area of Earth it applies to as long as everyone uses the same reference.

From wikipedia again, http://en.wikipedia.org/wiki/Nautical_time:

Around 1950, a letter suffix was added to the zone description, assigning Z to the zero zone, and A–M (except J) to the east and N–Y to the west (J may be assigned to local time in non-nautical applications; zones M and Y have the same clock time but differ by 24 hours: a full day). These were to be vocalized using a phonetic alphabet which pronounces the letter Z as Zulu, leading sometimes to the use of the term "Zulu Time". The Greenwich time zone runs from 7.5°W to 7.5°E longitude, while zone A runs from 7.5°E to 22.5°E longitude, etc.

With :before and :after you specify which content should be inserted before (or after) the content inside of that element. input elements have no content.

E.g. if you write <input type="text">Test</input> (which is wrong) the browser will correct this and put the text after the input element.

The only thing you could do is to wrap every input element in a span or div and apply the CSS on these.

See the examples in the specification:

For example, the following document fragment and style sheet:

<h2> Header </h2>               h2 { display: run-in; }
<p> Text </p>                   p:before { display: block; content: 'Some'; }

...would render in exactly the same way as the following document fragment and style sheet:

<h2> Header </h2>            h2 { display: run-in; }
<p><span>Some</span> Text </p>  span { display: block }

This is the same reason why it does not work for <br>, <img>, etc. (<textarea> seems to be special).

Here's the .NET Core version of AdamCrawford's answer, using System.Reflection.TypeExtensions;

public static class EnumHelper
{
    /// <summary>
    /// Gets an attribute on an enum field value
    /// </summary>
    /// <typeparam name="T">The type of the attribute you want to retrieve</typeparam>
    /// <param name="enumVal">The enum value</param>
    /// <returns>The attribute of type T that exists on the enum value</returns>
    /// <example>string desc = myEnumVariable.GetAttributeOfType<DescriptionAttribute>().Description;</example>
    public static T GetAttributeOfType<T>(this Enum enumVal) where T : System.Attribute
    {
        var type = enumVal.GetType();
        var memInfo = type.GetMember(enumVal.ToString());
        IEnumerable<Attribute> attributes = memInfo[0].GetCustomAttributes(typeof(T), false);
        return (T)attributes?.ToArray()[0];
    }
}

If you have more numbers or if you intend to add new test numbers for CASE then you can use a more flexible approach:

DECLARE @Numbers TABLE
(
    Number VARCHAR(50) PRIMARY KEY
    ,Class TINYINT NOT NULL
);
INSERT @Numbers
VALUES ('1121231',1);
INSERT @Numbers
VALUES ('31242323',1);
INSERT @Numbers
VALUES ('234523',2);
INSERT @Numbers
VALUES ('2342423',2);

SELECT c.*, n.Class
FROM   tblClient c  
LEFT OUTER JOIN   @Numbers n ON c.Number = n.Number;

Also, instead of table variable you can use a regular table.

You have a misplaced closing brace before the return statement.

I found this example

https://github.com/square/retrofit/issues/1557

Here we set custom url client connection client before before we build API rest service implementation.

import com.google.gson.Gson
import com.google.gson.GsonBuilder
import retrofit.Endpoint
import retrofit.RestAdapter
import retrofit.client.Request
import retrofit.client.UrlConnectionClient
import retrofit.converter.GsonConverter


class ClientBuilder {

    public static <T> T buildClient(final Class<T> client, final String serviceUrl) {
        Endpoint mCustomRetrofitEndpoint = new CustomRetrofitEndpoint()


        Gson gson = new GsonBuilder().excludeFieldsWithoutExposeAnnotation().create()
        RestAdapter.Builder builder = new RestAdapter.Builder()
            .setEndpoint(mCustomRetrofitEndpoint)
            .setConverter(new GsonConverter(gson))
            .setClient(new MyUrlConnectionClient())
        RestAdapter restAdapter = builder.build()
        return restAdapter.create(client)
    }
}

 public final class MyUrlConnectionClient extends UrlConnectionClient {
        @Override
        protected HttpURLConnection openConnection(Request request) {
            HttpURLConnection connection = super.openConnection(request);
            connection.setConnectTimeout(15 * 1000);
            connection.setReadTimeout(30 * 1000);
            return connection;
        }
    }

In comparisons it makes a difference if a scalar is a number of a string. And it is not always decidable. I can report a case where perl retrieved a float in "scientific" notation and used that same a few lines below in a comparison:

use strict;
....
next unless $line =~ /and your result is:\s*(.*)/;
my $val = $1;
if ($val < 0.001) {
   print "this is small\n";
}

And here $val was not interpreted as numeric for e.g. "2e-77" retrieved from $line. Adding 0 (or 0.0 for good ole C programmers) helped.

You have more static resources that the cache has room for. You can do one of the following:

• Increase the size of the cache
• Decrease the TTL for the cache
• Disable caching

For more details see the documentation for these configuration options.

It's called market segmentation or something like that. nVidia produces one very configurable chip and then sells it in different configurations that essentially have the same elements and hence the same bill of materials to different market segments, although one would usually expect to find elements of higher quality on the more expensive Quadro boards.

What differentiates Quadro from GeForce is that GeForce usually has its dual precision floating point performance severely limited, e.g. to 1/4 or 1/8 of that of the Quadro/Tesla GPUs. This limitation is purely artificial and imposed on solely to differentiate the gamer/enthusiast segment from the professional segment. Lower DP performance makes GeForce boards bad candidates for stuff like scientific or engineering computing and those are markets where money streams from. Also Quadros (arguably) have more display channels and faster RAMDACs which allows them to drive more and higher resolution screens, a sort of setup perceived as professional for CAD/CAM work.

As Jason Morgan has pointed out, there are tricks that can unlock some of the disabled features in GeForce to bring them in par with Quadro. Those usually involves soldering and voids the warranty on the card. Since HPC puts lots of stress on the hardware and malfunctions occur more frequently that one would like them to, I would advise against using cheap tricks.

My problem was that I had the wrong MS Sync FrameWork version (1.0) in my project References. After update to the version 2.1, the error was gone and life is good again.

This is happening be cause you have 2 classes with same name. For, example, I have 2 SOAP web-services named settings and settings2 both have the same class GetEmployee and this is ambiguous proving the error.

In our codebase; we typically declare enums in the class that they belong to.

So for your Fruit example, We would have a Fruit class, and inside that an Enum called Fruits.

Referencing it in the code looks like this: Fruit.Fruits.Apple, Fruit.Fruits.Pear, etc.

Constants follow along the same line, where they either get defined in the class to which they're relevant (so something like Fruit.ORANGE_BUSHEL_SIZE); or if they apply system-wide (i.e. an equivalent "null value" for ints) in a class named "ConstantManager" (or equivalent; like ConstantManager.NULL_INT). (side note; all our constants are in upper case)

As always, your coding standards probably differ from mine; so YMMV.

@jovi all you need to do is add .babelrc file like this:

{
  "plugins": [
    "transform-strict-mode",
    "transform-es2015-modules-commonjs",
    "transform-es2015-spread",
    "transform-es2015-destructuring",
    "transform-es2015-parameters"
  ]
}

and install these plugins as devdependences with npm.

then try babel-node ***.js again. hope this can help you.

The latest I have found is that there is a system property called sun.java.launcher.pid that is available at least on linux. My plan is to use that and if it is not found to use the JMX bean.

To check if a lateinit var were initialised or not use a .isInitialized on the reference to that property:

if (foo::bar.isInitialized) {
    println(foo.bar)
}

This checking is only available for the properties that are accessible lexically, i.e. declared in the same type or in one of the outer types, or at top level in the same file.

case 
    when a.REASONID in ('02','03','04','05','06') then
        case b.CALSOC 
            when '1' then 'yes' 
            when '2' then 'no' 
            else 'no' 
        end
    else 'no' 
end 

If the command line way of configuring your proxy server doesn't work, you can probably just edit .gitconfig (in the root of your profile, which may hide both in C:\Documents and Settings and on some network drive) and add this:

[http]
    proxy = http://username:[email protected]:8080

YMMV though, this only covers the first step of the command line configuration. You may have to edit the system git configuration too and I have no idea where they hid that.

<?php
if ( session_id() != "" ) {
    session_start();
}

Basically, you need to check if a session was started before creating another one; ... more reading.

On the other hand, you chose to destroy an existing session before creating another one using session_destroy().

    DateTimeFormatter dateFormatter = DateTimeFormatter.ofPattern("MM/dd/uuuu");
    System.out.println(LocalDate.parse("08/16/2011", dateFormatter));

Output:

2011-08-16

I am contributing the modern answer. The answer by Bohemian is correct and was a good answer when it was written 6 years ago. Now the notoriously troublesome SimpleDateFormat class is long outdated and we have so much better in java.time, the modern Java date and time API. I warmly recommend you use this instead of the old date-time classes.

What went wrong in your code?

When I parse 08/16/2011 using your snippet, I get Sun Jan 16 00:08:00 CET 2011. Since lowercase mm is for minutes, I get 00:08:00 (8 minutes past midnight), and since uppercase DD is for day of year, I get 16 January.

In java.time too format pattern strings are case sensitive, and we needed to use uppercase MM for month and lowercase dd for day of month.

Question: Can I use java.time with my Java version?

Yes, java.time works nicely on Java 6 and later and on both older and newer Android devices.

• In Java 8 and later and on new Android devices (from API level 26, I’m told) the modern API comes built-in.
• In Java 6 and 7 get the ThreeTen Backport, the backport of the new classes (ThreeTen for JSR 310; see the links at the bottom).
• On (older) Android use the Android edition of ThreeTen Backport. It’s called ThreeTenABP. And make sure you import the date and time classes from org.threeten.bp with subpackages.

Links

• Oracle tutorial: Date Time explaining how to use java.time.
• Java Specification Request (JSR) 310, where java.time was first described.
• ThreeTen Backport project, the backport of java.timeto Java 6 and 7 (ThreeTen for JSR-310).
• ThreeTenABP, Android edition of ThreeTen Backport
• Question: How to use ThreeTenABP in Android Project, with a very thorough explanation.

Here's some code that works for us. We found MSIE to be hit and miss with DomContentLoaded, there appears to be some delay when no additional resources are cached (up to 300ms based on our console logging), and it triggers too fast when they are cached. So we resorted to a fallback for MISE. You also want to trigger the doStuff() function whether DomContentLoaded triggers before or after your external JS files.

// detect MSIE 9,10,11, but not Edge
ua=navigator.userAgent.toLowerCase();isIE=/msie/.test(ua);

function doStuff(){
    //
}
if(isIE){
    // play it safe, very few users, exec ur JS when all resources are loaded
    window.onload=function(){doStuff();}
} else {
    // add event listener to trigger your function when DOMContentLoaded
    if(document.readyState==='loading'){
        document.addEventListener('DOMContentLoaded',doStuff);
    } else {
        // DOMContentLoaded already loaded, so better trigger your function
        doStuff();
    }
}

This is all nicely lined up including the field label. Lining up the field label was the tricky part.

HTML Code:

<div class="form-group">
    <label class="control-label col-md-5">Create a</label>
    <div class="col-md-7">
        <label class="radio-inline control-label">
            <input checked="checked" id="TaskLog_TaskTypeId" name="TaskLog.TaskTypeId" type="radio" value="2"> Task
        </label>
        <label class="radio-inline control-label">
            <input id="TaskLog_TaskTypeId" name="TaskLog.TaskTypeId" type="radio" value="1"> Note
        </label>
    </div>
</div>

CSHTML / Razor Code:

<div class="form-group">
    @Html.Label("Create a", htmlAttributes: new { @class = "control-label col-md-5" })
    <div class="col-md-7">
        <label class="radio-inline control-label">
            @Html.RadioButtonFor(model => model.TaskTypeId, Model.TaskTaskTypeId) Task
        </label>
        <label class="radio-inline control-label">
            @Html.RadioButtonFor(model => model.TaskTypeId, Model.NoteTaskTypeId) Note
        </label>
    </div>
</div>

For those who intend to use venv:

If you don't already have pip for Python 3:

sudo apt install python3-pip

Install venv package:

sudo apt install python3.7-venv

Create virtual environment (which will be bootstrapped with pip by default):

python3.7 -m venv /path/to/new/virtual/environment

To activate the virtual environment, source the appropriate script for the current shell, from the bin directory of the virtual environment. The appropriate scripts for the different shells are:

bash/zsh – activate

fish – activate.fish

csh/tcsh – activate.csh

For example, if using bash:

source /path/to/new/virtual/environment/bin/activate

Optionally, to update pip for the virtual environment (while it is activated):

pip install --upgrade pip

When you want to deactivate the virtual environment:

deactivate 

case python3

from PIL import Image
from IPython.display import HTML
from io import BytesIO
from base64 import b64encode

pil_im = Image.open('data/empire.jpg')
b = BytesIO()  
pil_im.save(b, format='png')
HTML("<img src='data:image/png;base64,{0}'/>".format(b64encode(b.getvalue()).decode('utf-8')))

For Bootstrap 4, there are now spacing utilities so it's easier to change the height via padding on the nav links. This can be responsively applied only at specific breakpoints (ie: py-md-3). For example, on larger (md) screens, this nav is 120px high, then shrinks to normal height for the mobile menu. No extra CSS is needed..

<nav class="navbar navbar-fixed-top navbar-inverse bg-primary navbar-toggleable-md py-md-3">
    <button class="navbar-toggler navbar-toggler-right" type="button" data-toggle="collapse" data-target="#navbarNav" aria-expanded="false" aria-label="Toggle navigation">
        <span class="navbar-toggler-icon"></span>
    </button>
    <a class="navbar-brand" href="#">Brand</a>
    <div class="navbar-collapse collapse" id="navbarNav">
        <ul class="navbar-nav">
            <li class="nav-item py-md-3"><a href="#" class="nav-link">Home</a></li>
            <li class="nav-item py-md-3"><a href="#" class="nav-link">Link</a></li>
            <li class="nav-item py-md-3"><a href="#" class="nav-link">Link</a></li>
            <li class="nav-item py-md-3"><a href="#" class="nav-link">More</a></li>
            <li class="nav-item py-md-3"><a href="#" class="nav-link">Options</a></li>
        </ul>
    </div>
</nav>

Bootstrap 4 Navbar Height Demo

if you use sass, you can try this

&::-webkit-scrollbar { 

}

Don't know men. I found the best way for me after testing different ways like 10 minutes. ( Change the numbers in code to get big or small random number.)

    int x;
srand ( time(NULL) );
x = rand() % 1000 * rand() % 10000 ;
cout<<x;

Re: textFile.getch(), did you make that up, or do you have a reference that says it should work? If it's the latter, get rid of it. If it's the former, don't do that. Get a good reference.

char ch;
textFile.unsetf(ios_base::skipws);
textFile >> ch;

def norm(vector):
    return sqrt(sum(x * x for x in vector))    

def cosine_similarity(vec_a, vec_b):
        norm_a = norm(vec_a)
        norm_b = norm(vec_b)
        dot = sum(a * b for a, b in zip(vec_a, vec_b))
        return dot / (norm_a * norm_b)

This method seems to be somewhat faster than using sklearn's implementation if you pass in one pair of vectors at a time.

Those who are using VS2012

Goto project > Properties > Web

Check Use Local IIS Web server

Check Use IIS Express

Project Url http://localhost:PORT/

A slight modification beyond @udondan's answer. I like to reuse the registered variable names with the set_fact to help keep the clutter to a minimum.

So if I were to register using the variable, psk, I'd use that same variable name with creating the set_fact.

Example

- name: generate PSK
  shell: openssl rand -base64 48
  register: psk
  delegate_to: 127.0.0.1
  run_once: true

- set_fact: 
    psk={{ psk.stdout }}

- debug: var=psk
  run_once: true

Then when I run it:

$ ansible-playbook -i inventory setup_ipsec.yml

 PLAY                                                                                                                                                                                [all] *************************************************************************************************************************************************************************

 TASK [Gathering                                                                                                                                                                     Facts] *************************************************************************************************************************************************************
 ok: [hostc.mydom.com]
 ok: [hostb.mydom.com]
 ok: [hosta.mydom.com]

 TASK [libreswan : generate                                                                                                                                                          PSK] ****************************************************************************************************************************************************
 changed: [hosta.mydom.com -> 127.0.0.1]

 TASK [libreswan :                                                                                                                                                                   set_fact] ********************************************************************************************************************************************************
 ok: [hosta.mydom.com]
 ok: [hostb.mydom.com]
 ok: [hostc.mydom.com]

 TASK [libreswan :                                                                                                                                                                   debug] ***********************************************************************************************************************************************************
 ok: [hosta.mydom.com] => {
     "psk": "6Tx/4CPBa1xmQ9A6yKi7ifONgoYAXfbo50WXPc1kGcird7u/pVso/vQtz+WdBIvo"
 }

 PLAY                                                                                                                                                                                RECAP *************************************************************************************************************************************************************************
 hosta.mydom.com    : ok=4    changed=1    unreachable=0    failed=0
 hostb.mydom.com    : ok=2    changed=0    unreachable=0    failed=0
 hostc.mydom.com    : ok=2    changed=0    unreachable=0    failed=0

You may get your answer here: Get-WmiObject : The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)

UPDATE

It might be due to various issues.I cant say which one is there in your case. It may be because:

• DCOM is not enabled in host pc or target pc or on both
• your firewall or even your antivirus is preventing the access
• any WMI related service is disabled

Some WMI related services are:

• Remote Access Auto Connection Manager
• Remote Access Connection Manager
• Remote Procedure Call (RPC)
• Remote Procedure Call (RPC) Locator
• Remote Registry

For DCOM settings refer to registry key HKLM\Software\Microsoft\OLE, value EnableDCOM. The value should be set to 'Y'.

There are two common approaches for this:

• Specify http-proxy- options in your /etc/.subversion/servers or %APPDATA%\Subversion\servers file,

• Use --config-option command-line option to specify the same http-proxy- options in single command-line you run. For example,

  svn checkout ^
  --config-option servers:global:http-proxy-host=<PROXY-HOST> ^
  --config-option servers:global:http-proxy-port=<PORT> <REPO-URL> <LWC-DIR> 
  

If you are on Windows, you can also write http-proxy- options to Windows Registry. It's pretty handy if you need to apply proxy settings in Active Directory environment via Group Policy Objects.

Real Time Output Issue resolved: I encountered a similar issue in Python, while capturing the real time output from C program. I added fflush(stdout); in my C code. It worked for me. Here is the code.

C program:

#include <stdio.h>
void main()
{
    int count = 1;
    while (1)
    {
        printf(" Count  %d\n", count++);
        fflush(stdout);
        sleep(1);
    }
}

Python program:

#!/usr/bin/python

import os, sys
import subprocess


procExe = subprocess.Popen(".//count", shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE, universal_newlines=True)

while procExe.poll() is None:
    line = procExe.stdout.readline()
    print("Print:" + line)

Output:

Print: Count  1
Print: Count  2
Print: Count  3

I did try using a Monitor (code below) which appears to work but has a GOTCHA... when you have multiple threads it will give... System.Threading.SynchronizationLockException Object synchronization method was called from an unsynchronized block of code.

using System;
using System.Threading;
using System.Threading.Tasks;

namespace MyNamespace
{
    public class ThreadsafeFooModifier : 
    {
        private readonly object _lockObject;

        public async Task<FooResponse> ModifyFooAsync()
        {
            FooResponse result;
            Monitor.Enter(_lockObject);
            try
            {
                result = await SomeFunctionToModifyFooAsync();
            }
            finally
            {
                Monitor.Exit(_lockObject);
            }
            return result;
        }
    }
}

Prior to this I was simply doing this, but it was in an ASP.NET controller so it resulted in a deadlock.

public async Task<FooResponse> ModifyFooAsync() { lock(lockObject) { return SomeFunctionToModifyFooAsync.Result; } }

To import your module, you need to add its directory to the environment variable, either temporarily or permanently.

Temporarily

import sys
sys.path.append("/path/to/my/modules/")
import my_module

Permanently

Adding the following line to your .bashrc file (in linux) and excecute source ~/.bashrc in the terminal:

export PYTHONPATH="${PYTHONPATH}:/path/to/my/modules/"

Credit/Source: saarrrr, another stackexchange question

check for

if ([tableView respondsToSelector:@selector(setSeparatorInset:)]) {
    [tableView setSeparatorInset:UIEdgeInsetsZero];
}

• mention tableview delegate function cellForRowAtIndexPath:
• it can handled both ios 6 and 7.

If you are looking for a basic crash reporting tool, try crashlytics.

If you want a more advanced reporting tool, Checkout Gryphonet. It logs all the crashes occured along with the exact line of code that caused the crash along with automated markers that show you the steps the user took prior to the crash and more.

Good luck!

ok, so my problem was that I tried to install the package with yum which is the primary tool for getting, installing, deleting, querying, and managing Red Hat Enterprise Linux RPM software packages from official Red Hat software repositories, as well as other third-party repositories.

But I'm using ubuntu and The usual way to install packages on the command line in Ubuntu is with apt-get. so the right command was:

sudo apt-get install libstdc++.i686

I personally do not use the objected oriented approach, mostly because it a) only get in the way; b) you will never reuse that as a module.

but something that is not discussed here, is that you must use threading or multiprocessing. Always. otherwise your application will be awful.

just do a simple test: start a window, and then fetch some URL or anything else. changes are your UI will not be updated while the network request is happening. Meaning, your application window will be broken. depend on the OS you are on, but most times, it will not redraw, anything you drag over the window will be plastered on it, until the process is back to the TK mainloop.

If you have GNU extensions, you can use sed's \L (lower entire match, or until \L [lower] or \E [end - toggle casing off] is reached), like so:

sed 's/.*/\L&/' <input >output

Note: '&' means the full match pattern.

As a side note, GNU extensions include \U (upper), \u (upper next character of match), \l (lower next character of match). For example, if you wanted to camelcase a sentence:

$ sed -r 's/\w+/\u&/g' <<< "Now is the time for all good men..." # Camel Case
Now Is The Time For All Good Men...

Note: Since the assumption is we have GNU extensions, we can also use the dash-r (extended regular expressions) option, which allows \w (word character) and relieves you of having to escape the capturing parenthesis and one-or-more quantifier (+). (Aside: \W [non-word], \s [whitespace], \S [non-whitespace] are also supported with dash-r, but \d [digit] and \D [non-digit] are not.)

use ClipboardManager

 ClipboardManager clipboard = (ClipboardManager) getSystemService(Context.CLIPBOARD_SERVICE); 
 ClipData clip = ClipData.newPlainText(label, text);
 clipboard.setPrimaryClip(clip);

make sure you have imported android.content.ClipboardManager and NOT android.text.ClipboardManager. Latter is deprecated. Check this link for Further information.

You can use an extension method.

public static class Extensions
{

    public static T ToEnum<T>(this string data) where T : struct
    {
        if (!Enum.TryParse(data, true, out T enumVariable))
        {
            if (Enum.IsDefined(typeof(T), enumVariable))
            {
                return enumVariable;
            }
        }

        return default;
    }

    public static T ToEnum<T>(this int data) where T : struct
    {
        return (T)Enum.ToObject(typeof(T), data);
    }
}

Use it like the below code:

Enum:

public enum DaysOfWeeks
{
    Monday = 1,
    Tuesday = 2,
    Wednesday = 3,
    Thursday = 4,
    Friday = 5,
    Saturday = 6,
    Sunday = 7,
}

Usage:

 string Monday = "Mon";
 int Wednesday = 3;
 var Mon = Monday.ToEnum<DaysOfWeeks>();
 var Wed = Wednesday.ToEnum<DaysOfWeeks>();

You could also put non-breaking spaces ( ) in lieu of the spaces so that they're forced to stay together.

How do I wrap this line of text
- asked by Peter 2 days ago

If you want the column as string values, then:

SELECT id, name, CASE WHEN hide = 0 THEN 'false' ELSE 'true' END AS hide
  FROM anonymous_table

If the DBMS supports BOOLEAN, you can use instead:

SELECT id, name, CASE WHEN hide = 0 THEN false ELSE true END AS hide
  FROM anonymous_table

That's the same except that the quotes around the names false and true were removed.

You need to update the output of json.load with a_dict and then dump the result. And you cannot append to the file but you need to overwrite it.

Workaround:

 tableView.getColumns().get(0).setVisible(false);
 tableView.getColumns().get(0).setVisible(true);

As pointed out in this answer, Django 1.9 added the Field.disabled attribute:

The disabled boolean argument, when set to True, disables a form field using the disabled HTML attribute so that it won’t be editable by users. Even if a user tampers with the field’s value submitted to the server, it will be ignored in favor of the value from the form’s initial data.

With Django 1.8 and earlier, to disable entry on the widget and prevent malicious POST hacks you must scrub the input in addition to setting the readonly attribute on the form field:

class ItemForm(ModelForm):
    def __init__(self, *args, **kwargs):
        super(ItemForm, self).__init__(*args, **kwargs)
        instance = getattr(self, 'instance', None)
        if instance and instance.pk:
            self.fields['sku'].widget.attrs['readonly'] = True

    def clean_sku(self):
        instance = getattr(self, 'instance', None)
        if instance and instance.pk:
            return instance.sku
        else:
            return self.cleaned_data['sku']

Or, replace if instance and instance.pk with another condition indicating you're editing. You could also set the attribute disabled on the input field, instead of readonly.

The clean_sku function will ensure that the readonly value won't be overridden by a POST.

Otherwise, there is no built-in Django form field which will render a value while rejecting bound input data. If this is what you desire, you should instead create a separate ModelForm that excludes the uneditable field(s), and just print them inside your template.

I'm a bit surprised that no one has mentioned this. In general, rather than trimming data that you don't want, avoid writing it in the first place. If you don't want the newline in the buffer, don't use fgets. Instead, use getc or fgetc or scanf. Perhaps something like:

#include <stdio.h>
#include <stdlib.h>
int
main(void)
{
        char Name[256];
        char fmt[32];
        int rc;
        sprintf(fmt, "%%%zd[^\n]", sizeof Name - 1);
        if( (rc = scanf(fmt, Name)) == 1 ) {
                printf("Name = %s\n", Name);
        }
        return rc == 1 ? EXIT_SUCCESS : EXIT_FAILURE;
}

The only secure way of doing this

The only guaranteed secure method of retrieving the current domain is to store it in a secure location yourself.

Most frameworks take care of storing the domain for you, so you will want to consult the documentation for your particular framework. If you're not using a framework, consider storing the domain in one of the following places:

The following work... but they're not secure

Hackers can make the following variables output whatever domain they want. This can lead to cache poisoning and barely noticeable phishing attacks.

$_SERVER['HTTP_HOST']

This gets the domain from the request headers which are open to manipulation by hackers. Same with:

$_SERVER['SERVER_NAME']

This one can be made better if the Apache setting usecanonicalname is turned off; in which case $_SERVER['SERVER_NAME'] will no longer be allowed to be populated with arbitrary values and will be secure. This is, however, non-default and not as common of a setup.

In popular systems

Below is how you can get the current domain in the following frameworks/systems:

WordPress

$urlparts = parse_url(home_url());
$domain = $urlparts['host'];

If you're constructing a URL in WordPress, just use home_url or site_url, or any of the other URL functions.

Laravel

request()->getHost()

The request()->getHost function is inherited from Symfony, and has been secure since the 2013 CVE-2013-4752 was patched.

Drupal

The installer does not yet take care of making this secure (issue #2404259). But in Drupal 8 there is documentation you can you can follow at Trusted Host Settings to secure your Drupal installation after which the following can be used:

\Drupal::request()->getHost();

Other frameworks

Feel free to edit this answer to include how to get the current domain in your favorite framework. When doing so, please include a link to the relevant source code or to anything else that would help me verify that the framework is doing things securely.

Addendum

Exploitation examples:

1. Cache poisoning can happen if a botnet continuously requests a page using the wrong hosts header. The resulting HTML will then include links to the attackers website where they can phish your users. At first the malicious links will only be sent back to the hacker, but if the hacker does enough requests, the malicious version of the page will end up in your cache where it will be distributed to other users.

2. A phishing attack can happen if you store links in the database based on the hosts header. For example, let say you store the absolute URL to a user's profiles on a forum. By using the wrong header, a hacker could get anyone who clicks on their profile link to be sent a phishing site.

3. Password reset poisoning can happen if a hacker uses a malicious hosts header when filling out the password reset form for a different user. That user will then get an email containing a password reset link that leads to a phishing site. Another more complex form of this skips the user having to do anything by getting the email to bounce and resend to one of the hacker's SMTP servers (for example CVE-2017-8295.)

4. Here are some more malicious examples

Additional Caveats and Notes:

• When usecanonicalname is turned off the $_SERVER['SERVER_NAME'] is populated with the same header $_SERVER['HTTP_HOST'] would have used anyways (plus the port). This is Apache's default setup. If you or devops turns this on then you're okay -- ish -- but do you really want to rely on a separate team, or yourself three years in the future, to keep what would appear to be a minor configuration at a non-default value? Even though this makes things secure, I would caution against relying on this setup.
• Redhat, however, does turn usecanonical on by default [source].
• If serverAlias is used in the virtual hosts entry, and the aliased domain is requested, $_SERVER['SERVER_NAME'] will not return the current domain, but will return the value of the serverName directive.
• If the serverName cannot be resolved, the operating system's hostname command is used in its place [source].
• If the host header is left out, the server will behave as if usecanonical was on [source].
• Lastly, I just tried exploiting this on my local server, and was unable to spoof the hosts header. I'm not sure if there was an update to Apache that addressed this, or if I was just doing something wrong. Regardless, this header would still be exploitable in environments where virtual hosts are not being used.

Little Rant:

     This question received hundreds of thousands of views without a single mention of the security problems at hand! It shouldn't be this way, but just because a Stack Overflow answer is popular, that doesn't mean it is secure.

std::string trimmed(std::string str ) {
if(str.length() == 0 ) { return "" ; }
else if ( str == std::string(" ") ) { return "" ; } 
else {
    while(str.at(0) == ' ') { str.erase(0, 1);}
    while(str.at(str.length()-1) == ' ') { str.pop_back() ; }
    return str ;
    } 
}

Best practice is to use an interface to specify the contract and an abstract class as just one implementation thereof. That abstract class can fill in a lot of the boilerplate so you can create an implementation by just overriding what you need to or want to without forcing you to use a particular implementation.

malloc will do.

 int rows = 20;
 int cols = 20;
 int *array;

  array = malloc(rows * cols * sizeof(int));

Refer the below article for help:-

http://courses.cs.vt.edu/~cs2704/spring00/mcquain/Notes/4up/Managing2DArrays.pdf

If you use a CompletableFuture (introduced in Java 8) or a SettableFuture (from Google Guava), you can make your test finish as soon as it's done, rather than waiting a pre-set amount of time. Your test would look something like this:

CompletableFuture<String> future = new CompletableFuture<>();
executorService.submit(new Runnable() {         
    @Override
    public void run() {
        future.complete("Hello World!");                
    }
});
assertEquals("Hello World!", future.get());

You need to follow the advice from Miles M comment and here is a little code that fixes the range in mysql. Also u need to open up my.ini(Mysql) and change max_execution_time=60 to max_execution_time=6000; for large databases. Dont use "ALTER TABLE tablename AUTO_INCREMENT = 1" it will delete everything in your database.

$con=mysqli_connect($dbhost, $dbuser, $dbpass, $database);
$res=mysqli_query($con, "select * FROM data WHERE id LIKE id ORDER BY id ASC");
$count = 0;  
while ($row = mysqli_fetch_array($res)){
         $count++;
        
    mysqli_query($con, "UPDATE data SET id='".$count."' WHERE id='".$row['id']."'");
    
         }
         echo 'Done reseting id';
         mysqli_close($con);

The following is MultiLevel dropdown based on bootstrap4. I tried it was according to the bootstrap4 basic dropdown.

.dropdown-submenu{_x000D_
    position: relative;_x000D_
}_x000D_
.dropdown-submenu a::after{_x000D_
    transform: rotate(-90deg);_x000D_
    position: absolute;_x000D_
    right: 3px;_x000D_
    top: 40%;_x000D_
}_x000D_
.dropdown-submenu:hover .dropdown-menu, .dropdown-submenu:focus .dropdown-menu{_x000D_
    display: flex;_x000D_
    flex-direction: column;_x000D_
    position: absolute !important;_x000D_
    margin-top: -30px;_x000D_
    left: 100%;_x000D_
}_x000D_
@media (max-width: 992px) {_x000D_
    .dropdown-menu{_x000D_
        width: 50%;_x000D_
    }_x000D_
    .dropdown-menu .dropdown-submenu{_x000D_
        width: auto;_x000D_
    }_x000D_
}

<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/4.0.0-alpha.6/css/bootstrap.min.css" integrity="sha384-rwoIResjU2yc3z8GV/NPeZWAv56rSmLldC3R/AZzGRnGxQQKnKkoFVhFQhNUwEyJ" crossorigin="anonymous">_x000D_
<script src="https://code.jquery.com/jquery-3.1.1.slim.min.js" integrity="sha384-A7FZj7v+d/sdmMqp/nOQwliLvUsJfDHW+k9Omg/a/EheAdgtzNs3hpfag6Ed950n" crossorigin="anonymous"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/tether/1.4.0/js/tether.min.js" integrity="sha384-DztdAPBWPRXSA/3eYEEUWrWCy7G5KFbe8fFjk5JAIxUYHKkDx6Qin1DkWx51bBrb" crossorigin="anonymous"></script>_x000D_
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/4.0.0-alpha.6/js/bootstrap.min.js" integrity="sha384-vBWWzlZJ8ea9aCX4pEW3rVHjgjt7zpkNpZk+02D9phzyeVkE+jo0ieGizqPLForn" crossorigin="anonymous"></script>_x000D_
_x000D_
<nav class="navbar navbar-toggleable-md navbar-light bg-faded">_x000D_
  <button class="navbar-toggler navbar-toggler-right" type="button" data-toggle="collapse" data-target="#navbarNavDropdown" aria-controls="navbarNavDropdown" aria-expanded="false" aria-label="Toggle navigation">_x000D_
    <span class="navbar-toggler-icon"></span>_x000D_
  </button>_x000D_
  <a class="navbar-brand" href="#">Navbar</a>_x000D_
  <div class="collapse navbar-collapse" id="navbarNavDropdown">_x000D_
    <ul class="navbar-nav mr-auto">_x000D_
      <li class="nav-item active">_x000D_
        <a class="nav-link" href="#">Home <span class="sr-only">(current)</span></a>_x000D_
      </li>_x000D_
      <li class="nav-item">_x000D_
        <a class="nav-link" href="#">Link 1</a>_x000D_
      </li>_x000D_
      <li class="nav-item dropdown">_x000D_
        <a class="nav-link dropdown-toggle" href="http://example.com" id="navbarDropdownMenuLink" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">_x000D_
          Dropdown link_x000D_
        </a>_x000D_
        <ul class="dropdown-menu" aria-labelledby="navbarDropdownMenuLink">_x000D_
          <li><a class="dropdown-item" href="#">Action</a></li>_x000D_
          <li><a class="dropdown-item" href="#">Another action</a></li>_x000D_
          <li class="dropdown-submenu"><a class="dropdown-item dropdown-toggle" data-toggle="dropdown" href="#">Something else here</a>_x000D_
            <ul class="dropdown-menu">_x000D_
              <a class="dropdown-item" href="#">A</a>_x000D_
              <a class="dropdown-item" href="#">b</a>_x000D_
            </ul>_x000D_
          </li>_x000D_
        </ul>_x000D_
      </li>_x000D_
    </ul>_x000D_
  </div>_x000D_
</nav>

I was wondering why I was getting that big warning message on Ubuntu 16.04 (which comes with Git 2.7.4), but not on Arch Linux. The reason is that the warning was removed in Git 2.8 (March 2016):

Across the transition at around Git version 2.0, the user used to get a pretty loud warning when running "git push" without setting push.default configuration variable. We no longer warn because the transition was completed a long time ago.

So you won't see the warning if you have Git 2.8 and later and don't need to set push.default unless you want to change the default 'simple' behavior.

The reference to the string is passed by value. There's a big difference between passing a reference by value and passing an object by reference. It's unfortunate that the word "reference" is used in both cases.

If you do pass the string reference by reference, it will work as you expect:

using System;

class Test
{
    public static void Main()
    {
        string test = "before passing";
        Console.WriteLine(test);
        TestI(ref test);
        Console.WriteLine(test);
    }

    public static void TestI(ref string test)
    {
        test = "after passing";
    }
}

Now you need to distinguish between making changes to the object which a reference refers to, and making a change to a variable (such as a parameter) to let it refer to a different object. We can't make changes to a string because strings are immutable, but we can demonstrate it with a StringBuilder instead:

using System;
using System.Text;

class Test
{
    public static void Main()
    {
        StringBuilder test = new StringBuilder();
        Console.WriteLine(test);
        TestI(test);
        Console.WriteLine(test);
    }

    public static void TestI(StringBuilder test)
    {
        // Note that we're not changing the value
        // of the "test" parameter - we're changing
        // the data in the object it's referring to
        test.Append("changing");
    }
}

See my article on parameter passing for more details.

I can't answer all questions, but I will do my best.

As you already know, WS is only a persistent full-duplex TCP connection with framed messages where the initial handshaking is HTTP-like. You need some server that's listening for incoming WS requests and that binds a handler to them.

Now it might be possible with Apache HTTP Server, and I've seen some examples, but there's no official support and it gets complicated. What would Apache do? Where would be your handler? There's a module that forwards incoming WS requests to an external shared library, but this is not necessary with the other great tools to work with WS.

WS server trends now include: Autobahn (Python) and Socket.IO (Node.js = JavaScript on the server). The latter also supports other hackish "persistent" connections like long polling and all the COMET stuff. There are other little known WS server frameworks like Ratchet (PHP, if you're only familiar with that).

In any case, you will need to listen on a port, and of course that port cannot be the same as the Apache HTTP Server already running on your machine (default = 80). You could use something like 8080, but even if this particular one is a popular choice, some firewalls might still block it since it's not supposed to be Web traffic. This is why many people choose 443, which is the HTTP Secure port that, for obvious reasons, firewalls do not block. If you're not using SSL, you can use 80 for HTTP and 443 for WS. The WS server doesn't need to be secure; we're just using the port.

Edit: According to Iharob Al Asimi, the previous paragraph is wrong. I have no time to investigate this, so please see his work for more details.

About the protocol, as Wikipedia shows, it looks like this:

Client sends:

GET /mychat HTTP/1.1
Host: server.example.com
Upgrade: websocket
Connection: Upgrade
Sec-WebSocket-Key: x3JJHMbDL1EzLkh9GBhXDw==
Sec-WebSocket-Protocol: chat
Sec-WebSocket-Version: 13
Origin: http://example.com

Server replies:

HTTP/1.1 101 Switching Protocols
Upgrade: websocket
Connection: Upgrade
Sec-WebSocket-Accept: HSmrc0sMlYUkAGmm5OPpG2HaGWk=
Sec-WebSocket-Protocol: chat

and keeps the connection alive. If you can implement this handshaking and the basic message framing (encapsulating each message with a small header describing it), then you can use any client-side language you want. JavaScript is only used in Web browsers because it's built-in.

As you can see, the default "request method" is an initial HTTP GET, although this is not really HTTP and looses everything in common with HTTP after this handshaking. I guess servers that do not support

Upgrade: websocket
Connection: Upgrade

will reply with an error or with a page content.

you could just use replace function before you return the string in the method

return df.format(bd).replace(",", ".")

To avoid getting the encryption error you can also try out below commands

ftp = ftplib.FTP_TLS("ftps.dummy.com")
ftp.login("username", "password")
ftp.prot_p()
file = open("filename", "rb")
ftp.storbinary("STOR filename", file)
file.close()
ftp.close()

ftp.prot_p() ensure that your connections are encrypted

You could just give the first cell (therefore column) a width and have the rest default to auto

table {_x000D_
  table-layout: fixed;_x000D_
  border-collapse: collapse;_x000D_
  width: 100%;_x000D_
}_x000D_
td {_x000D_
  border: 1px solid #000;_x000D_
  width: 150px;_x000D_
}_x000D_
td+td {_x000D_
  width: auto;_x000D_
}

<table>_x000D_
  <tr>_x000D_
    <td>150px</td>_x000D_
    <td>equal</td>_x000D_
    <td>equal</td>_x000D_
  </tr>_x000D_
</table>

or alternatively the "proper way" to get column widths might be to use the col element itself

table {_x000D_
  table-layout: fixed;_x000D_
  border-collapse: collapse;_x000D_
  width: 100%;_x000D_
}_x000D_
td {_x000D_
  border: 1px solid #000;_x000D_
}_x000D_
.wide {_x000D_
  width: 150px;_x000D_
}

<table>_x000D_
  <col span="1" class="wide">_x000D_
    <tr>_x000D_
      <td>150px</td>_x000D_
      <td>equal</td>_x000D_
      <td>equal</td>_x000D_
    </tr>_x000D_
</table>

To each his own but the right way to code this is to rename the columns inserting underscore so there are no gaps. This will ensure zero errors when coding. When printing the column names for public display you could search-and-replace to replace the underscore with a space.

Retrieve timezone by name (i.e. "America/New York")

moment.tz.guess();

I tried all the other options here, but I could not get import cv2 working with Anaconda on Ubuntu. This is the only thing that helped:

pip install opencv-python

An extension method for this which makes use of SemaphoreSlim and also allows to set maximum degree of parallelism

    /// <summary>
    /// Concurrently Executes async actions for each item of <see cref="IEnumerable<typeparamref name="T"/>
    /// </summary>
    /// <typeparam name="T">Type of IEnumerable</typeparam>
    /// <param name="enumerable">instance of <see cref="IEnumerable<typeparamref name="T"/>"/></param>
    /// <param name="action">an async <see cref="Action" /> to execute</param>
    /// <param name="maxDegreeOfParallelism">Optional, An integer that represents the maximum degree of parallelism,
    /// Must be grater than 0</param>
    /// <returns>A Task representing an async operation</returns>
    /// <exception cref="ArgumentOutOfRangeException">If the maxActionsToRunInParallel is less than 1</exception>
    public static async Task ForEachAsyncConcurrent<T>(
        this IEnumerable<T> enumerable,
        Func<T, Task> action,
        int? maxDegreeOfParallelism = null)
    {
        if (maxDegreeOfParallelism.HasValue)
        {
            using (var semaphoreSlim = new SemaphoreSlim(
                maxDegreeOfParallelism.Value, maxDegreeOfParallelism.Value))
            {
                var tasksWithThrottler = new List<Task>();

                foreach (var item in enumerable)
                {
                    // Increment the number of currently running tasks and wait if they are more than limit.
                    await semaphoreSlim.WaitAsync();

                    tasksWithThrottler.Add(Task.Run(async () =>
                    {
                        await action(item).ContinueWith(res =>
                        {
                            // action is completed, so decrement the number of currently running tasks
                            semaphoreSlim.Release();
                        });
                    }));
                }

                // Wait for all tasks to complete.
                await Task.WhenAll(tasksWithThrottler.ToArray());
            }
        }
        else
        {
            await Task.WhenAll(enumerable.Select(item => action(item)));
        }
    }

Sample Usage:

await enumerable.ForEachAsyncConcurrent(
    async item =>
    {
        await SomeAsyncMethod(item);
    },
    5);

In fact, it is very easy.

composer update

will do all this for you, but it will also update the other packages.

To remove a package without updating the others, specifiy that package in the command, for instance:

composer update monolog/monolog

will remove the monolog/monolog package.

Nevertheless, there may remain some empty folders or files that cannot be removed automatically, and that have to be removed manually.

The Oracle SQL developer is not supported by the 64bit JDK. To resolve this issue:

1. Install a 32bit JDK (x86)
2. Update your SQL developer config file (It should now point to the new 32bit JDK).
3. Edit the sqldeveloper.conf, which can be found under {ORACLE_HOME}\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
4. Make sure SetJavaHome is pointing to your 32bit JDK.

For example:

SetJavaHome C:\Program Files (x86) \Java\jdk1.6.0_13

Use TextView inside a ScrollView

<ScrollView
    android:id="@+id/ScrollView01"
    android:layout_width="wrap_content"
    android:layout_height="150dip">

    <TextView
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"/>

</ScrollView>

If you are using:

tstart = clock();

// ...do something...

tend = clock();

Then you will need the following to get time in seconds:

time = (tend - tstart) / (double) CLOCKS_PER_SEC;

First - stop Jenkins service:

sudo service jenkins stop

Next - delete:

sudo apt-get remove --purge jenkins

If you used separate server for Jenkins, some GCP or AWS - just delete this server. Here is a video how to uninstall Jenkins from GCP Compute Engine https://youtu.be/D2HUFAc_Trw

''.join([a, b]) is better solution than +.

Because Code should be written in a way that does not disadvantage other implementations of Python (PyPy, Jython, IronPython, Cython, Psyco, and such)

form a += b or a = a + b is fragile even in CPython and isn't present at all in implementations that don't use refcounting (reference counting is a technique of storing the number of references, pointers, or handles to a resource such as an object, block of memory, disk space or other resource)

https://www.python.org/dev/peps/pep-0008/#programming-recommendations

You should not use your domain models in your views. ViewModels are the correct way to do it.

You need to map your domain model's necessary fields to viewmodel and then use this viewmodel in your controllers. This way you will have the necessery abstraction in your application.

If you never heard of viewmodels, take a look at this.

Here is the example which results in a strange error. Even Google gives no results:

public class ExampleClass {

private static final Pattern dateCreateP = Pattern.compile("???? ??????:\\s*(.+)");
private static final SimpleDateFormat sdf = new SimpleDateFormat("HH:mm:ss dd.MM.yyyy");

public static void main(String[] args) {
    ExecutorService executor = Executors.newFixedThreadPool(100);
    while (true) {
        executor.submit(new Runnable() {
            @Override
            public void run() {
                workConcurrently();
            }
        });
    }
}

public static void workConcurrently() {
    Matcher matcher = dateCreateP.matcher("???? ??????: 19:30:55 03.05.2015");
    Timestamp startAdvDate = null;
    try {
        if (matcher.find()) {
            String dateCreate = matcher.group(1);
            startAdvDate = new Timestamp(sdf.parse(dateCreate).getTime());
        }
    } catch (Throwable th) {
        th.printStackTrace();
    }
    System.out.print("OK ");
}
}

And result :

OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK java.lang.NumberFormatException: For input string: ".201519E.2015192E2"
at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:2043)
at sun.misc.FloatingDecimal.parseDouble(FloatingDecimal.java:110)
at java.lang.Double.parseDouble(Double.java:538)
at java.text.DigitList.getDouble(DigitList.java:169)
at java.text.DecimalFormat.parse(DecimalFormat.java:2056)
at java.text.SimpleDateFormat.subParse(SimpleDateFormat.java:1869)
at java.text.SimpleDateFormat.parse(SimpleDateFormat.java:1514)
at java.text.DateFormat.parse(DateFormat.java:364)
at com.nonscalper.webscraper.processor.av.ExampleClass.workConcurrently(ExampleClass.java:37)
at com.nonscalper.webscraper.processor.av.ExampleClass$1.run(ExampleClass.java:25)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)

Try the following query:

DECLARE @item VARCHAR(MAX) = 'LD-23DSP-1430'

SELECT
SUBSTRING( @item, 0, CHARINDEX('-', @item)) ,
SUBSTRING(
               SUBSTRING( @item, CHARINDEX('-', @item)+1,LEN(@ITEM)) ,
               0 ,
               CHARINDEX('-', SUBSTRING( @item, CHARINDEX('-', @item)+1,LEN(@ITEM)))
              ),
REVERSE(SUBSTRING( REVERSE(@ITEM), 0, CHARINDEX('-', REVERSE(@ITEM))))

I'd suggest using intermediary third table for storing tags<=>items associations, since we have many-to-many relations between tags and items, i.e. one item can be associated with multiple tags and one tag can be associated with multiple items. HTH, Valve.

I ran into the same issue and couldn't decide between laughing or smashing my head on the table when I read this error...

What git really tries to tell you: "You are already in a merge state and need to resolve the conflicts there first!"

You tried a merge and a conflict occured. Then, git stays in the merge state and if you want to resolve the merge with other commands git thinks you want to execute a new merge and so it tells you you can't do this because of your current unmerged files...

You can leave this state with git merge --abort and now try to execute other commands.

In my case I tried a pull and wanted to resolve the conflicts by hand when the error occured...

You can just connect all answers in one cron line and use only date command.

Just check the difference between day of the month which is today and will be tomorrow:

0 23 * * * root [ $(expr $(date +\%d -d '1 days') - $(date +\%d)  ) -le 0 ]  && echo true

If these difference is below 0 it means that we change the month and there is last day of the month.

You should try doing it with css3 animation. Check the code bellow:

<!DOCTYPE html>
<html>
<head>
<style> 
div {
    width: 100px;
    height: 100px;
    background: red;
    position: relative;
    -webkit-animation: myfirst 5s infinite; /* Chrome, Safari, Opera */
    -webkit-animation-direction: alternate; /* Chrome, Safari, Opera */
    animation: myfirst 5s infinite;
    animation-direction: alternate;
}

/* Chrome, Safari, Opera */
@-webkit-keyframes myfirst {
    0%   {background: red; left: 0px; top: 0px;}
    25%  {background: yellow; left: 200px; top: 0px;}
    50%  {background: blue; left: 200px; top: 200px;}
    75%  {background: green; left: 0px; top: 200px;}
    100% {background: red; left: 0px; top: 0px;}
}

@keyframes myfirst {
    0%   {background: red; left: 0px; top: 0px;}
    25%  {background: yellow; left: 200px; top: 0px;}
    50%  {background: blue; left: 200px; top: 200px;}
    75%  {background: green; left: 0px; top: 200px;}
    100% {background: red; left: 0px; top: 0px;}
}
</style>
</head>
<body>

<p><strong>Note:</strong> The animation-direction property is not supported in Internet Explorer 9 and earlier versions.</p>
<div></div>

</body>
</html>

Where 'div' is your animated object.

I hope you find this useful.

Thanks.

There's also concat, but it doesn't get used much

select concat('a','b') from dual;

I had the same problem, and tried a lot of different variants. After some tries I became able to sudo gem install, but still have problem to install it without sudo.
Finally I found a decission - reinstalling of rvm helped me. Probably it can save time somebody else.

Using Underscore.js:

function serializeForm($form){
    return _.object(_.map($form.serializeArray(), function(item){return [item.name, item.value]; }));
}

Try pressing the icon given if you are getting the following error:

"ModuleNotFoundError: No module named 'rest_framework'"

It will ask you to import the given package, that is rest_framework and run the code again.

This worked for me and trying to solve that error for a couple of days.

Try doing it this way, it worked for me:

$this->validate($request, [
'name' => 'required|min:3|max:50',
'email' => 'email',
'vat_number' => 'max:13',
'password' => 'min:6|required_with:password_confirmation|same:password_confirmation',
'password_confirmation' => 'min:6'
]);`

Seems like the rule always has the validation on the first input among the pair...

You can order by a selected column or other expressions.

Here an example, how to order by the result of a case-statement:

  SELECT col1
       , col2
    FROM tbl_Bill
   WHERE col1 = 0
ORDER BY -- order by case-statement
    CASE WHEN tbl_Bill.IsGen = 0 THEN 0
         WHEN tbl_Bill.IsGen = 1 THEN 1
         ELSE 2 END

The result will be a List starting with "IsGen = 0" rows, followed by "IsGen = 1" rows and all other rows a the end.

You could add more order-parameters at the end:

  SELECT col1
       , col2
    FROM tbl_Bill
   WHERE col1 = 0
ORDER BY -- order by case-statement
    CASE WHEN tbl_Bill.IsGen = 0 THEN 0
         WHEN tbl_Bill.IsGen = 1 THEN 1
         ELSE 2 END,
         col1,
         col2

table th,td {
    padding: 8px 2px;
}
table {
    border-collapse: separate;
    border-spacing: 2px;
}

Use .net inbuilt class JavaScriptSerializer

  JavaScriptSerializer js = new JavaScriptSerializer();
  string json = js.Serialize(obj);

Here's a reusable version of Shoban's answer:

<input type="text" id="userid" name="userid"
 value="Please enter the user ID" onfocus="Clear(this);"
/>

function Clear(elem)
{
elem.value='';
}

That way you can reuse the clear script for multiple elements.

Try this:

function generateInputs(form, input) {
  x = input.value;
  for (y = 0; x > y; y++) {
    var element = document.createElement('input');
    element.type = "text";
    element.placeholder = "New Input";
    form.appendChild(element);
  }
}

input {
  padding: 10px;
  margin: 10px;
}

<div id="input-form">
  <input type="number" placeholder="Desired number of inputs..." onchange="generateInputs(document.getElementById('input-form'), this)" required><br>
</div>

The code above, has a form with an input which accepts a number in it:

<form id="input-form">
  <input type="number" placeholder="Desired number of inputs..." onchange="generateInputs(document.getElementById('input-form'), this)"><br>
</form>

The input runs a function onchange, meaning that when the user has entered a number and clicked submit, it run a function. The user is required to fill out the input with a value before submitting. This value must be numerical. Once submitted the parent form and the input are passed to the function:

...
generateInputs(document.getElementById('input-form'), this)
...

The generate then loops according to the given value inside the input:

...
x = input.value;
for (y=0; x>y; y++) {
...

Then it generates an input inside the form, on each loop:

...
var element = document.createElement('input');
element.type = "text";
element.placeholder = "New Input";
form.appendChild(element);
...

I have also added in a few CSS stylings to make the inputs look nice, and some placeholders as well. To read more about creating elements createElement():

https://www.w3schools.com/jsref/met_document_createelement.asp

To read more about for loops:

https://www.w3schools.com/js/js_loop_for.asp

But still, the memory address for each letter in this address is different.

Memory address is different but as its array of characters they are sequential. When you pass address of first element and use %s, printf will print all characters starting from given address until it finds '\0'.

private static String readAll(Reader rd) throws IOException {
    StringBuilder sb = new StringBuilder();
    int cp;
    while ((cp = rd.read()) != -1) {
      sb.append((char) cp);
    }
    return sb.toString();
  }

 String jsonText = readAll(inputofyourjsonstream);
 JSONObject json = new JSONObject(jsonText);
 JSONArray arr = json.getJSONArray("sources");

Your arr would looks like: [ { "id":1001, "name":"jhon" }, { "id":1002, "name":"jhon" } ] You can use:

arr.getJSONObject(index)

to get the objects inside of the array.

Use the re library

import re
myString = "I want to Remove all white \t spaces, new lines \n and tabs \t"
myString = re.sub(r"[\n\t\s]*", "", myString)
print myString

Output:

IwanttoRemoveallwhitespaces,newlinesandtabs

if you use jquery you can do like this. from this site Placeholder with Jquery

$('[placeholder]').parents('form').submit(function() {
  $(this).find('[placeholder]').each(function() {
    var input = $(this);
    if (input.val() == input.attr('placeholder')) {
      input.val('');
    }
  })
});

these are the alternate links

1. Placeholder jquery library
2. HTML5 polyfills -- go for placeholder section

I think that the best solution currently for springBoot 2.0 is using profiles

@RunWith(SpringRunner.class)
@SpringBootTest(classes = Application.class, webEnvironment = WebEnvironment.DEFINED_PORT)
@ActiveProfiles("test")
public class ExcludeAutoConfigIntegrationTest {
    // ...
} 

spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.security.servlet.SecurityAutoConfiguration

anyway in the following link give 6 different alternatives to solve this.

I just wanted to add onto eskis' fantastic answer for people having trouble. (Note: This will only work and look like separate directories inside the 'project' view, not the 'android' view unfortunately.)

Tested with the following. BuildToolsVersion = 23.0.0 gradle 1.2.3 & 1.3.0

This is how I got mine to work with an already built project.

1. Copy all of the XML files out of your layout directory, and put them into a directory on the desktop or something for backup.
2. Delete the entire layout directory (Make sure you backed everything up from step 1!!!)
3. Right click the res directory and select new > directory.
4. Name this new directory "layouts". (This can be whatever you want, but it will not be a 'fragment' directory or 'activity' directory, that comes later).
5. Right click the new "layouts" directory and select new > directory. (This will be the name of the type of XML files you will have in it, for example, 'fragments' and 'activities').
6. Right click the 'fragment' or 'activities' directory (Note: this doesn't have to be 'fragment' or 'activities' that's just what i'm using as an example) and select new > directory once again and name this directory "layout". (Note: This MUST be named 'layout'!!! very important).
7. Put the XML files you want inside the new 'layout' directory from the backup you made on your desktop.
8. Repeat steps 5 - 7 for as many custom directories as you desire.

9. Once this is complete, go into your modules gradle.build file and create a sourceSets definition like this...(Make sure 'src/main/res/layouts' & 'src/main/res' are always the bottom two!!!! Like I am showing below).

   sourceSets {
       main {
           res.srcDirs =
                   [
                           'src/main/res/layouts/activities',
                           'src/main/res/layouts/fragments',
                           'src/main/res/layouts/content',
                           'src/main/res/layouts',
                           'src/main/res'
                   ]
       }
   }
   

10. Profit $$$$

But seriously.. this is how I got it to work. Let me know if anyone has any questions.. I can try to help.

Pictures are worth more than words.

Connect didn't work for me, The problem was that Genymotion uses its own dk-tools and you need to change it to custom SDK tools.

More info: https://stackoverflow.com/a/26630862/4154438

I don't know if I'm on the right path, but I got it working on ng 2.4.8 with the following form/submit tags:

<form #heroForm="ngForm" (ngSubmit)="add(newHero); heroForm.reset()">
<!-- place your input stuff here -->
<button type="submit" class="btn btn-default" [disabled]="!heroForm.valid">Add hero</button>

Seems to do the trick and sets the form's fields to "pristine" again.

One has to group imagePullPolicy inside the container data instead of inside the spec data. However, I filed an issue about this because I find it odd. Besides, there is no error message.

So, this spec snippet works:

spec:
  containers:
  - name: myapp
    image: myregistry.com/myapp:5c3dda6b
    ports:
    - containerPort: 80
    imagePullPolicy: Always
  imagePullSecrets:
    - name: myregistry.com-registry-key

To augment LazyOne's answer, here is an annotated version of the answer.

<rewrite>
  <rules>
     <clear />
     <rule name="Redirect all requests to https" stopProcessing="true">
       <match url="(.*)" />
         <conditions logicalGrouping="MatchAll">
           <add input="{HTTPS}" pattern="off" ignoreCase="true" />
         </conditions>
         <action 
            type="Redirect" url="https://{HTTP_HOST}{REQUEST_URI}" 
            redirectType="Permanent" appendQueryString="false" />
     </rule>
  </rules>
</rewrite>

Clear all the other rules that might already been defined on this server. Create a new rule, that we will name "Redirect all requests to https". After processing this rule, do not process any more rules! Match all incoming URLs. Then check whether all of these other conditions are true: HTTPS is turned OFF. Well, that's only one condition (but make sure it's true). If it is, send a 301 Permanent redirect back to the client at http://www.foobar.com/whatever?else=the#url-contains. Don't add the query string at the end of that, because it would duplicate the query string!

This is what the properties, attributes, and some of the values mean.

• clear removes all server rules that we might otherwise inherit.
• rule defines a rule.
  • name an arbitrary (though unique) name for the rule.
  • stopProcessing whether to forward the request immediately to the IIS request pipeline or first to process additional rules.
• match when to run this rule.
  • url a pattern against which to evaluate the URL
• conditions additional conditions about when to run this rule; conditions are processed only if there is first a match.
  • logicalGrouping whether all the conditions must be true (MatchAll) or any of the conditions must be true (MatchAny); similar to AND vs OR.
• add adds a condition that must be met.
  • input the input that a condition is evaluating; input can be server variables.
  • pattern the standard against which to evaluate the input.
  • ignoreCase whether capitalization matters or not.
• action what to do if the match and its conditions are all true.
  • type can generally be redirect (client-side) or rewrite (server-side).
  • url what to produce as a result of this rule; in this case, concatenate https:// with two server variables.
  • redirectType what HTTP redirect to use; this one is a 301 Permanent.
  • appendQueryString whether to add the query string at the end of the resultant url or not; in this case, we are setting it to false, because the {REQUEST_URI} already includes it.

The server variables are

• {HTTPS} which is either OFF or ON.
• {HTTP_HOST} is www.mysite.com, and
• {REQUEST_URI} includes the rest of the URI, e.g. /home?key=value
  • the browser handles the #fragment (see comment from LazyOne).

See also: https://www.iis.net/learn/extensions/url-rewrite-module/url-rewrite-module-configuration-reference

Try using the not() method instead of the :not() selector.

$(".content a").click(function() {
    $(".content a").not(this).hide("slow");
});

Class is a parameterizable class, hence you can use the syntax Class<T> where T is a type. By writing Class<?>, you're declaring a Class object which can be of any type (? is a wildcard). The Class type is a type that contains meta-information about a class.

It's always good practice to refer to a generic type by specifying his specific type, by using Class<?> you're respecting this practice (you're aware of Class to be parameterizable) but you're not restricting your parameter to have a specific type.

Reference about Generics and Wildcards: http://docs.oracle.com/javase/tutorial/java/generics/wildcards.html

Reference about Class object and reflection (the feature of Java language used to introspect itself): https://www.oracle.com/technetwork/articles/java/javareflection-1536171.html

Use the following method in the table view delegate's didSelectRowAtIndexpath (Or from anywhere)

[myTable deselectRowAtIndexPath:[myTable indexPathForSelectedRow] animated:YES];

Manually installing Command LineTool worked for me.

1. I stalled xcode through App Store
2. Still could not download Homebrew
3. I installed Command Line Tool manually through link.
4. Bing Bang Boom

https://developer.apple.com/download/more/?=command%20line%20tools

Following are few options available to change Heap Size.

-Xms<size>        set initial Java heap size
-Xmx<size>        set maximum Java heap size
-Xss<size>        set java thread stack size

java -Xmx256m TestData.java

This answer has been resolved for a while and all the available options are already out there. However in this answer I'll attempt to shed a bit more light on these options to help you understand when to use what.

This post will go through the following topics:

• Merging with index under different conditions
  • options for index-based joins: merge, join, concat
  • merging on indexes
  • merging on index of one, column of other
• effectively using named indexes to simplify merging syntax

Index-based joins

TL;DR

There are a few options, some simpler than others depending on the use case.

1. DataFrame.merge with left_index and right_index (or left_on and right_on using named indexes)
2. DataFrame.join (joins on index)
3. pd.concat (joins on index)

Index to index joins

Typically, an inner join on index would look like this:

left.merge(right, left_index=True, right_index=True)

Other types of joins (left, right, outer) follow similar syntax (and can be controlled using how=...).

Notable Alternatives

1. DataFrame.join defaults to a left outer join on the index.

    left.join(right, how='inner',)
   

   If you happen to get ValueError: columns overlap but no suffix specified, you will need to specify lsuffix and rsuffix= arguments to resolve this. Since the column names are same, a differentiating suffix is required.

2. pd.concat joins on the index and can join two or more DataFrames at once. It does a full outer join by default.

    pd.concat([left, right], axis=1, sort=False)
   

   For more information on concat, see this post.

Index to Column joins

To perform an inner join using index of left, column of right, you will use DataFrame.merge a combination of left_index=True and right_on=....

left.merge(right, left_index=True, right_on='key')

Other joins follow a similar structure. Note that only merge can perform index to column joins. You can join on multiple levels/columns, provided the number of index levels on the left equals the number of columns on the right.

join and concat are not capable of mixed merges. You will need to set the index as a pre-step using DataFrame.set_index.

^{This post is an abridged version of my work in Pandas Merging 101. Please follow this link for more examples and other topics on merging.}

Maybe this can help :)

Controller

$scope.scrollevent = function($e){
   // Your code
}

Html

<div scroll scroll-event="scrollevent">//scrollable content</div>

Or

<body scroll scroll-event="scrollevent">//scrollable content</body>

Directive

.directive("scroll", function ($window) {
   return {
      scope: {
         scrollEvent: '&'
      },
      link : function(scope, element, attrs) {
        $("#"+attrs.id).scroll(function($e) { scope.scrollEvent != null ?  scope.scrollEvent()($e) : null })
      }
   }
})

If you use Linux, you can try the following approach.
Suppose you have a text file named animal.txt:

$ cat animal.txt  
dog
pig
cat 
monkey         
elephant  

Delete the first line:

>>> import subprocess
>>> subprocess.call(['sed','-i','/.*dog.*/d','animal.txt']) 

then

$ cat animal.txt
pig
cat
monkey
elephant

I did it like this

#!/bin/bash

ZK_HOST="localhost"
ZK_PORT=2181


for i in `echo dump | nc $ZK_HOST $ZK_PORT | grep brokers`
do
    echo $i
    DETAIL=`zkCli -server "$ZK_HOST:$ZK_PORT" get $i 2>/dev/null | tail -n 1`
    echo $DETAIL
done

CAST(CONVERT(CHAR(8),GETUTCDATE(),114) AS DATETIME)

IN SQL Server 2008+

CAST(GETUTCDATE() AS TIME)

Use SqlCommand.ExecuteScalar() and cast it to an int:

cmd.CommandText = "SELECT COUNT(*) FROM table_name";
Int32 count = (Int32) cmd.ExecuteScalar();

The below examples might help understand:

def add_nums1(x,y):
    print(x+y)

def add_nums2(x,y):
    return x+y 

#----Function output is usable for further processing
add_nums2(10,20)/2
15.0

#----Function output can't be used further (gives TypeError)
add_nums1(10,20)/2

30
---------------------------------------------------------------------------
TypeError                                 Traceback (most recent call last)
<ipython-input-124-e11302d7195e> in <module>
----> 1 add_nums1(10,20)/2

TypeError: unsupported operand type(s) for /: 'NoneType' and 'int'

In my specific scenario i wanted to skip applying common styles to a specific part of the page, better illustrated like this:

<body class='common-styles'>
    <div id='header'>Wants common styles</div>
    <div id='container'>Does NOT want common styles</div>
    <div id='footer'>Wants common styles</div>
</body>

After messing with CSS reset which didn't bring much success (mainly because of rules precedence and complex stylesheet hierarchy), brought up ubiquitous jQuery to the rescue, which did the job very quickly and reasonably dirty:

$(function() {
    $('body').removeClass('common-styles');
    $('#header,#footer').addClass('common-styles');
});

(Now tell how evil it is to use JS to deal with CSS :-) )

Your reader variable is an iterable, by looping over it you retrieve the rows.

To make it skip one item before your loop, simply call next(reader, None) and ignore the return value.

You can also simplify your code a little; use the opened files as context managers to have them closed automatically:

with open("tmob_notcleaned.csv", "rb") as infile, open("tmob_cleaned.csv", "wb") as outfile:
   reader = csv.reader(infile)
   next(reader, None)  # skip the headers
   writer = csv.writer(outfile)
   for row in reader:
       # process each row
       writer.writerow(row)

# no need to close, the files are closed automatically when you get to this point.

If you wanted to write the header to the output file unprocessed, that's easy too, pass the output of next() to writer.writerow():

headers = next(reader, None)  # returns the headers or `None` if the input is empty
if headers:
    writer.writerow(headers)

There are four ways to build an iterative function:

• create a generator (uses the yield keyword)
• use a generator expression (genexp)
• create an iterator (defines __iter__ and __next__ (or next in Python 2.x))
• create a class that Python can iterate over on its own (defines __getitem__)

Examples:

# generator
def uc_gen(text):
    for char in text.upper():
        yield char

# generator expression
def uc_genexp(text):
    return (char for char in text.upper())

# iterator protocol
class uc_iter():
    def __init__(self, text):
        self.text = text.upper()
        self.index = 0
    def __iter__(self):
        return self
    def __next__(self):
        try:
            result = self.text[self.index]
        except IndexError:
            raise StopIteration
        self.index += 1
        return result

# getitem method
class uc_getitem():
    def __init__(self, text):
        self.text = text.upper()
    def __getitem__(self, index):
        return self.text[index]

To see all four methods in action:

for iterator in uc_gen, uc_genexp, uc_iter, uc_getitem:
    for ch in iterator('abcde'):
        print(ch, end=' ')
    print()

Which results in:

A B C D E
A B C D E
A B C D E
A B C D E

Note:

The two generator types (uc_gen and uc_genexp) cannot be reversed(); the plain iterator (uc_iter) would need the __reversed__ magic method (which, according to the docs, must return a new iterator, but returning self works (at least in CPython)); and the getitem iteratable (uc_getitem) must have the __len__ magic method:

    # for uc_iter we add __reversed__ and update __next__
    def __reversed__(self):
        self.index = -1
        return self
    def __next__(self):
        try:
            result = self.text[self.index]
        except IndexError:
            raise StopIteration
        self.index += -1 if self.index < 0 else +1
        return result

    # for uc_getitem
    def __len__(self)
        return len(self.text)

To answer Colonel Panic's secondary question about an infinite lazily evaluated iterator, here are those examples, using each of the four methods above:

# generator
def even_gen():
    result = 0
    while True:
        yield result
        result += 2


# generator expression
def even_genexp():
    return (num for num in even_gen())  # or even_iter or even_getitem
                                        # not much value under these circumstances

# iterator protocol
class even_iter():
    def __init__(self):
        self.value = 0
    def __iter__(self):
        return self
    def __next__(self):
        next_value = self.value
        self.value += 2
        return next_value

# getitem method
class even_getitem():
    def __getitem__(self, index):
        return index * 2

import random
for iterator in even_gen, even_genexp, even_iter, even_getitem:
    limit = random.randint(15, 30)
    count = 0
    for even in iterator():
        print even,
        count += 1
        if count >= limit:
            break
    print

Which results in (at least for my sample run):

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32

How to choose which one to use? This is mostly a matter of taste. The two methods I see most often are generators and the iterator protocol, as well as a hybrid (__iter__ returning a generator).

Generator expressions are useful for replacing list comprehensions (they are lazy and so can save on resources).

If one needs compatibility with earlier Python 2.x versions use __getitem__.

Piece of cake.

Use 960Grids Go to the automatic layout builder and make a two column, fluid design. Build a left column to the width of grids that works....this is the only challenge using grids and it's very easy once you read a tutorial. In a nutshell, each column in a grid is a certain width, and you set the amount of columns you want to use. To get a column that's exactly a certain width, you have to adjust your math so that your column width is exact. Not too tough.

No chance of wrapping because others have already fought that battle for you. Compatibility back as far as you likely will ever need to go. Quick and easy....Now, download, customize and deploy.

Voila. Grids FTW.

compile function -

1. is called before the controller and link function.
2. In compile function, you have the original template DOM so you can make changes on original DOM before AngularJS creates an instance of it and before a scope is created
3. ng-repeat is perfect example - original syntax is template element, the repeated elements in HTML are instances
4. There can be multiple element instances and only one template element
5. Scope is not available yet
6. Compile function can return function and object
7. returning a (post-link) function - is equivalent to registering the linking function via the link property of the config object when the compile function is empty.
8. returning an object with function(s) registered via pre and post properties - allows you to control when a linking function should be called during the linking phase. See info about pre-linking and post-linking functions below.

syntax

function compile(tElement, tAttrs, transclude) { ... }

controller

1. called after the compile function
2. scope is available here
3. can be accessed by other directives (see require attribute)

pre - link

1. The link function is responsible for registering DOM listeners as well as updating the DOM. It is executed after the template has been cloned. This is where most of the directive logic will be put.

2. You can update the dom in the controller using angular.element but this is not recommended as the element is provided in the link function

3. Pre-link function is used to implement logic that runs when angular js has already compiled the child elements but before any of the child element's post link have been called

post-link

1. directive that only has link function, angular treats the function as a post link

2. post will be executed after compile, controller and pre-link funciton, so that's why this is considered the safest and default place to add your directive logic

You cannot "convert" an existing column into an IDENTITY column - you will have to create a new column as INT IDENTITY:

ALTER TABLE ProductInProduct 
ADD NewId INT IDENTITY (1, 1);

Update:

OK, so there is a way of converting an existing column to IDENTITY. If you absolutely need this - check out this response by Martin Smith with all the gory details.

in android i did this using kotlin:

private fun angleBetweenPoints(a: PointF, b: PointF): Double {
        val deltaY = abs(b.y - a.y)
        val deltaX = abs(b.x - a.x)
        return Math.toDegrees(atan2(deltaY.toDouble(), deltaX.toDouble()))
    }

matches return true if the whole string matches the given pattern. find tries to find a substring that matches the pattern.

For me, the simplest way to do this is

1) Download and unzip bootstrap into vendor

2) Add the bootstrap path to your config

config.assets.paths << Rails.root.join("vendor/bootstrap-3.3.6-dist")

3) Require them

in css *= require css/bootstrap

in js //= require js/bootstrap

Done!

This methods makes the fonts load without any other special configuration and doesn't require moving the bootstrap files out of their self-contained directory.

Another solution is to use AngularJS. The AngularUI module has a directive called ng-grid which supports a feature called column pinning. It is not 100% pure CSS but neither are the other solutions.

http://angular-ui.github.io/ng-grid/#columnPinning

For users of IntelliJ IDEA or Android Studio make these steps:
* From the menu Build/Generate signed APK
* You need to create a keystore path. From the dialog click Create new. You will create a jks file that includes your keys. Select folder, define a password. So your keystore ok.
* Create new key by for your application by using alias, key password, your name etc.
* Click next.
* From the dialog either select Proguard or not.

Your signed APK file is ready.

Help file: https://www.jetbrains.com/idea/webhelp/generate-signed-apk-wizard.html

This works the best for me:

http://www.asciitable.com/

Sometimes it's the simple answers that are the best ;+)

Python or Python3 with MySQL, you will need these. These libraries use MySQL's connector for C and Python (you need the C libraries installed as well), which overcome some of the limitations of the mysqldb libraries.

   sudo apt-get install libmysqlclient-dev
   sudo apt-get install python-mysql.connector
   sudo apt-get install python3-mysql.connector

One more thing that could cause this is having incorrect version of the <parent> project.

In my case it was pointing to a non-existing project and for some reason IntelliJ downgraded version in settings to 1.5 and later when I fixed it, it was still interpreting target code version as 5 (despite setting it to 11).

For MySQL, this can be shortened to:

SELECT distributor_id,
    COUNT(*) total,
    SUM(level = 'exec') ExecCount,
    SUM(level = 'personal') PersonalCount
FROM yourtable
GROUP BY distributor_id

On Linux the command is whereis. Alternatively you can issue find / -name git and wait for an eternity. Alternatively try echo $PATH | sed "s/:/ /g" | xargs -L 1 ls | grep git

I would suggest having a look at Alex Shevchuk's tutorial. He explains "major upgrade" through WiX with a good hands-on example at From MSI to WiX, Part 8 - Major Upgrade.

I think we have multiple solutions here:

• instance of could be a solution.

Why? In Java every class is inherited from the Object class itself. So if you have a variable and you would like to know its type. You can use

• System.out.println(((Object)f).getClass().getName());

or

• Integer.class.isInstance(1985); // gives true

or

• isPrimitive()

  public static void main(String[] args) {
  
   ClassDemo classOne = new ClassDemo();
   Class classOneClass = classOne();
  
   int i = 5;
   Class iClass = int.class;
  
   // checking for primitive type
   boolean retval1 = classOneClass.isPrimitive();
   System.out.println("classOneClass is primitive type? = " + retval1);
  
   // checking for primitive type?
   boolean retval2 = iClass.isPrimitive();
   System.out.println("iClass is primitive type? = " + retval2);
  }
  

This going to give us:

1. FALSE
2. TRUE

Find out more here: How to determine the primitive type of a primitive variable?

https://docs.oracle.com/javase/tutorial/java/nutsandbolts/datatypes.html

http://docs.oracle.com/cd/E26806_01/wlp.1034/e14255/com/bea/p13n/expression/operator/Instanceof.html

The following code must be put at the end of your HTML file so that once the content has loaded, the script will be executed and the window will print.

<script type="text/javascript">
<!--
window.print();
//-->
</script>

Yes - older POSIX standards defined usleep(), so this is available on Linux:

int usleep(useconds_t usec);

DESCRIPTION

The usleep() function suspends execution of the calling thread for (at least) usec microseconds. The sleep may be lengthened slightly by any system activity or by the time spent processing the call or by the granularity of system timers.

usleep() takes microseconds, so you will have to multiply the input by 1000 in order to sleep in milliseconds.

usleep() has since been deprecated and subsequently removed from POSIX; for new code, nanosleep() is preferred:

#include <time.h>

int nanosleep(const struct timespec *req, struct timespec *rem);

DESCRIPTION

nanosleep() suspends the execution of the calling thread until either at least the time specified in *req has elapsed, or the delivery of a signal that triggers the invocation of a handler in the calling thread or that terminates the process.

The structure timespec is used to specify intervals of time with nanosecond precision. It is defined as follows:

struct timespec {
    time_t tv_sec;        /* seconds */
    long   tv_nsec;       /* nanoseconds */
};

An example msleep() function implemented using nanosleep(), continuing the sleep if it is interrupted by a signal:

#include <time.h>
#include <errno.h>    

/* msleep(): Sleep for the requested number of milliseconds. */
int msleep(long msec)
{
    struct timespec ts;
    int res;

    if (msec < 0)
    {
        errno = EINVAL;
        return -1;
    }

    ts.tv_sec = msec / 1000;
    ts.tv_nsec = (msec % 1000) * 1000000;

    do {
        res = nanosleep(&ts, &ts);
    } while (res && errno == EINTR);

    return res;
}

package com.tulu.ds;

public class EmailSecurity {
    public static void main(String[] args) {
        System.out.println(returnSecuredEmailID("[email protected]"));
    }
    private static String returnSecuredEmailID(String email){
        String str=email.substring(1, email.lastIndexOf("@")-1);
        return email.replaceAll(email.substring(1, email.lastIndexOf("@")-1),replacewith(str.length(),"*"));
    }
    private static String replacewith(int length,String replace) {
        String finalStr="";
        for(int i=0;i<length;i++){
            finalStr+=replace;
        }
        return finalStr;
    }   
}

I'm developing an application that needs currency conversion, and been using Open Exchange Rates because I wouldn't be paying since the app is in testing. But as of September 2012 Open Exchange Rates is gonna be paid for non-personal, so I checked out that they were using the Yahoo Finance Webservice (the one that "doesn't exist") and looking for documentation on it got here, and opted to use YQL.

Using YQL with the Yahoo Finance table (yahoo.finance.quotes) linked by NT3RP, currencies appear with symbol="ISOCODE=X", for example: "ARS=X" for Argentine Peso, "AUD=X" for Australian Dollar. "USD=X" doesn't exist, but it would be 1, since the rest are rates against USD.

The "price" value on the OP API is in the field "LastTradePriceOnly" of the table. For my application I used the "Ask" field.

Replace

f = open(D\\python\\HW\\2_1 - Copy.cp,"r");

by

f = open("D:\\python\\HW\\2_1 - Copy.cp", "r")

1. File path needs to be a string (constant)
2. need colon in Windows file path
3. space after comma for better style
4. ; after statement is allowed but fugly.

What tutorial are you using?

Use <div id="rectangle" style="width:number px; height:number px; background-color:blue"></div>

This will create a blue rectangle.

Happened to me when in windows, when using photoshop: When I saved an image and then switched to a branch (leaving photoshop with the image opened) i got the git error. Close the image in photoshop and retry

some thing as follows ::

Add this After the body tag

This is a rough sketch, you will need to modify it according to your needs.

<script>
var f = document.createElement("form");
f.setAttribute('method',"post");
f.setAttribute('action',"submit.php");

var i = document.createElement("input"); //input element, text
i.setAttribute('type',"text");
i.setAttribute('name',"username");

var s = document.createElement("input"); //input element, Submit button
s.setAttribute('type',"submit");
s.setAttribute('value',"Submit");

f.appendChild(i);
f.appendChild(s);

//and some more input elements here
//and dont forget to add a submit button

document.getElementsByTagName('body')[0].appendChild(f);

</script>

You might also try idxmax:

In [5]: df = pandas.DataFrame(np.random.randn(10,3),columns=['A','B','C'])

In [6]: df
Out[6]: 
          A         B         C
0  2.001289  0.482561  1.579985
1 -0.991646 -0.387835  1.320236
2  0.143826 -1.096889  1.486508
3 -0.193056 -0.499020  1.536540
4 -2.083647 -3.074591  0.175772
5 -0.186138 -1.949731  0.287432
6 -0.480790 -1.771560 -0.930234
7  0.227383 -0.278253  2.102004
8 -0.002592  1.434192 -1.624915
9  0.404911 -2.167599 -0.452900

In [7]: df.idxmax()
Out[7]: 
A    0
B    8
C    7

e.g.

In [8]: df.loc[df['A'].idxmax()]
Out[8]: 
A    2.001289
B    0.482561
C    1.579985

The difference lies in the fact that ./gradlew indicates you are using a gradle wrapper. The wrapper is generally part of a project and it facilitates installation of gradle. If you were using gradle without the wrapper you would have to manually install it - for example, on a mac brew install gradle and then invoke gradle using the gradle command. In both cases you are using gradle, but the former is more convenient and ensures version consistency across different machines.

Each Wrapper is tied to a specific version of Gradle, so when you first run one of the commands above for a given Gradle version, it will download the corresponding Gradle distribution and use it to execute the build.

Not only does this mean that you don’t have to manually install Gradle yourself, but you are also sure to use the version of Gradle that the build is designed for. This makes your historical builds more reliable

Read more here - https://docs.gradle.org/current/userguide/gradle_wrapper.html

Also, Udacity has a neat, high level video explaining the concept of the gradle wrapper - https://www.youtube.com/watch?v=1aA949H-shk

I got the same error and I solved it looking for the soap settings in the php.ini file and changing soap.wsdl_cache_enabled=1 to soap.wsdl_cache_enabled=0

This should do the job:

re.match(r"[^[]*\[([^]]*)\]", yourstring).groups()[0]

This works great on win7

$ PATH=$PATH:/c/Python27/ $ python -V Python 2.7.12

A Swift 2.2 solution, taking contentInset into account

let bottomOffset = CGPoint(x: 0, y: scrollView.contentSize.height - scrollView.bounds.size.height + scrollView.contentInset.bottom)
scrollView.setContentOffset(bottomOffset, animated: true)

This should be in an extension

extension UIScrollView {

  func scrollToBottom() {
    let bottomOffset = CGPoint(x: 0, y: contentSize.height - bounds.size.height + contentInset.bottom)
    setContentOffset(bottomOffset, animated: true)
  }
}

Note that you may want to check if bottomOffset.y > 0 before scroll

This one is gonna help you:

Assuming input is given as comma separated strings

console input: abc,bac,car,rac,pqr,acb,acr,abc

in_list = list()
in_list = map(str, raw_input("Enter strings seperated by comma").split(','))
list_anagram = list()

for i in range(0, len(in_list) - 1):
    if sorted(in_list[i]) not in list_anagram:
        for j in range(i + 1, len(in_list)):
            isanagram = (sorted(in_list[i]) == sorted(in_list[j]))
            if isanagram:
                list_anagram.append(sorted(in_list[i]))
                print in_list[i], 'isanagram'
                break

When I create a root class, whose methods I defined using the arrow functions. When inheriting and overwriting the original function I noticed the same issue.

class C {
  x = () => 1; 
 };
 
class CC extends C {
  x = (foo) =>  super.x() + foo;
};

let add = new CC;
console.log(add.x(4));

this is solved by defining the method of the parent class without arrow functions

class C {
  x() { 
    return 1; 
  }; 
 };
 
class CC extends C {
  x = foo =>  super.x() + foo;
};

let add = new CC;
console.log(add.x(4));

you can try this along, it may help to give a shorter code on large function.

$('#menu li a').on('click', function(){
    $('li a.current').toggleClass('current');
});

None/Null is a data type of the class NoneType in pyspark/python so, Below will not work as you are trying to compare NoneType object with string object

df[df.dt_mvmt == None].count() 0 df[df.dt_mvmt != None].count() 0

correct

df=df.where(col("dt_mvmt").isNotNull()) returns all records with dt_mvmt as None/Null

In case you are still searching for a better solution, I think this is what you want:

A Boolean value indicating whether the font size should be reduced in order to fit the title string into the label’s bounding rectangle (this property is effective only when the numberOfLines property is set to 1).

When setting this property, minimumScaleFactor MUST be set too (a good default is 0.5).

Swift

var adjustsFontSizeToFitWidth: Bool { get set }

Objective-C

@property(nonatomic) BOOL adjustsFontSizeToFitWidth;

A Boolean value indicating whether spacing between letters should be adjusted to fit the string within the label’s bounds rectangle.

Swift

var allowsDefaultTighteningForTruncation: Bool { get set }

Objective-C

@property(nonatomic) BOOL allowsDefaultTighteningForTruncation;

Source.

You can also copy the link address and paste it in a new window to get around the security. This works in chrome and firefox but you may have to add slashes in firefox.

After experimenting for a few hours I figured it out.

<% if @user.errors.full_messages.any? %>
  <% @user.errors.full_messages.each do |error_message| %>
    <%= error_message if @user.errors.full_messages.first == error_message %> <br />
  <% end %>
<% end %>

Even better:

<%= @user.errors.full_messages.first if @user.errors.any? %>

For Android 3.0 and higher only

When supporting Android 3.0 and higher only, you can define the action bar's background like this:

res/values/themes.xml

<?xml version="1.0" encoding="utf-8"?>
<resources>
    <!-- the theme applied to the application or activity -->
    <style name="CustomActionBarTheme" parent="@style/Theme.Holo.Light.DarkActionBar">
       <item name="android:actionBarStyle">@style/MyActionBar</item>
    </style>

<!-- ActionBar styles -->
  <style name="MyActionBar" parent="@style/Widget.Holo.Light.ActionBar.Solid.Inverse">
       <item name="android:background">#ff0000</item>
  </style>
</resources>

For Android 2.1 and higher

When using the Support Library, your style XML file might look like this:

<?xml version="1.0" encoding="utf-8"?>
  <resources>
  <!-- the theme applied to the application or activity -->
 <style name="CustomActionBarTheme" parent="@style/Theme.AppCompat.Light.DarkActionBar">
    <item name="android:actionBarStyle">@style/MyActionBar</item>

    <!-- Support library compatibility -->
    <item name="actionBarStyle">@style/MyActionBar</item>
</style>

<!-- ActionBar styles -->
<style name="MyActionBar"
       parent="@style/Widget.AppCompat.Light.ActionBar.Solid.Inverse">
    <item name="android:background">@drawable/actionbar_background</item>

    <!-- Support library compatibility -->
    <item name="background">@drawable/actionbar_background</item>
  </style>
 </resources>

Then apply your theme to your entire app or individual activities:

for more details Documentaion

This is actually a fairly interesting question. It's not as simple as it looks at first. For reference, I'm going to be basing this off of the latest C11 language grammar defined in N1570

I guess the counter-intuitive part of the question is: if this is correct C:

if (a == 1) {
  int b = 10;
}

then why is this not also correct C?

if (a == 1)
  int b = 10;

I mean, a one-line conditional if statement should be fine either with or without braces, right?

The answer lies in the grammar of the if statement, as defined by the C standard. The relevant parts of the grammar I've quoted below. Succinctly: the int b = 10 line is a declaration, not a statement, and the grammar for the if statement requires a statement after the conditional that it's testing. But if you enclose the declaration in braces, it becomes a statement and everything's well.

And just for the sake of answering the question completely -- this has nothing to do with scope. The b variable that exists inside that scope will be inaccessible from outside of it, but the program is still syntactically correct. Strictly speaking, the compiler shouldn't throw an error on it. Of course, you should be building with -Wall -Werror anyways ;-)

(6.7) declaration:
            declaration-speci?ers init-declarator-listopt ;
            static_assert-declaration

(6.7) init-declarator-list:
            init-declarator
            init-declarator-list , init-declarator

(6.7) init-declarator:
            declarator
            declarator = initializer

(6.8) statement:
            labeled-statement
            compound-statement
            expression-statement
            selection-statement
            iteration-statement
            jump-statement

(6.8.2) compound-statement:
            { block-item-listopt }

(6.8.4) selection-statement:
            if ( expression ) statement
            if ( expression ) statement else statement
            switch ( expression ) statement

You can create declare a public interface with a function declaration in the fragment and implement the interface in the activity. Then you can call the function from the fragment.