If the thing you want to compare is performance of file copying, then for the channel test you should do this instead:

final FileInputStream inputStream = new FileInputStream(src);
final FileOutputStream outputStream = new FileOutputStream(dest);
final FileChannel inChannel = inputStream.getChannel();
final FileChannel outChannel = outputStream.getChannel();
inChannel.transferTo(0, inChannel.size(), outChannel);
inChannel.close();
outChannel.close();
inputStream.close();
outputStream.close();

This won't be slower than buffering yourself from one channel to the other, and will potentially be massively faster. According to the Javadocs:

Many operating systems can transfer bytes directly from the filesystem cache to the target channel without actually copying them.

You can just use the Paths class:

Path path = Paths.get(textPath);

... assuming you want to use the default file system, of course.

You should assume the socket was closed on the other end. Wrap your code with a try catch block for IOException.

You can use isConnected() to determine if the SocketChannel is connected or not, but that might change before your write() invocation finishes. Try calling it in your catch block to see if in fact this is why you are getting the IOException.

Check out the CharsetEncoder and CharsetDecoder API descriptions - You should follow a specific sequence of method calls to avoid this problem. For example, for CharsetEncoder:

1. Reset the encoder via the reset method, unless it has not been used before;
2. Invoke the encode method zero or more times, as long as additional input may be available, passing false for the endOfInput argument and filling the input buffer and flushing the output buffer between invocations;
3. Invoke the encode method one final time, passing true for the endOfInput argument; and then
4. Invoke the flush method so that the encoder can flush any internal state to the output buffer.

By the way, this is the same approach I am using for NIO although some of my colleagues are converting each char directly to a byte in the knowledge they are only using ASCII, which I can imagine is probably faster.

If one does not know anything about the internal state of the given (Direct)ByteBuffer and wants to retrieve the whole content of the buffer, this can be used:

ByteBuffer byteBuffer = ...;
byte[] data = new byte[byteBuffer.capacity()];
((ByteBuffer) byteBuffer.duplicate().clear()).get(data);

Here a simple but perfectly working solution using recursion:

public static List<Path> listFiles(String rootDirectory)
{
    List<Path> files = new ArrayList<>();
    listFiles(rootDirectory, files);

    return files;
}

private static void listFiles(String path, List<Path> collectedFiles)
{
    File root = new File(path);
    File[] files = root.listFiles();

    if (files == null)
    {
        return;
    }

    for (File file : files)
    {
        if (file.isDirectory())
        {
            listFiles(file.getAbsolutePath(), collectedFiles);
        } else
        {
            collectedFiles.add(file.toPath());
        }
    }
}

http://jsfiddle.net/55LNG/1/

CSS:

#box{
    border:1px solid black;
    position:relative;
}
#overlay{
    position:absolute;
    top:0px;
    left:0px;
    bottom:0px;
    right:0px;
    background-color:rgba(255,255,0,0.5);
}

Another way that works for me is,

<command> |& tee  <outputFile>

as shown in gnu bash manual

Example:

ls |& tee files.txt

If ‘|&’ is used, command1’s standard error, in addition to its standard output, is connected to command2’s standard input through the pipe; it is shorthand for 2>&1 |. This implicit redirection of the standard error to the standard output is performed after any redirections specified by the command.

For more information, refer redirection

Use the HTML entity ∞ or ∞.

Auto-incrementing the index in a loop:

myArr[(len(myArr)+1)]={"key":"val"}

Update

One more reason why read the documentation for Symfony will never go out of trend. There is a simple solution for my specific case and is to set the field type option empty_data to a default value.

Again, this solution is only for the scenario where an empty input in a form sets the DB field to null.

Background

None of the previous answers helped me with my specific scenario but I found a solution.

I had a form field that needed to behave as follow:

1. Not required, could be left blank. (Used 'required' => false)
2. If left blank, it should default to a given value. For better user experience, I did not set the default value on the input field but rather used the html attribute 'placeholder' since it is less obtrusive.

I then tried all the recommendations given in here. Let me list them:

• Set a default value when for the entity property:

<?php
/**
 * @Entity
 */
class myEntity {
    /**
     * @var string
     *
     * @Column(name="myColumn", type="string", length="50")
     */
    private $myColumn = 'myDefaultValue';
    ...
}

• Use the options annotation:

@ORM\Column(name="foo", options={"default":"foo bar"})

• Set the default value on the constructor:

/**
 * @Entity
 */
class myEntity {
    ...
    public function __construct()
    {
        $this->myColumn = 'myDefaultValue';
    }
    ...
}

IMPORTANT

Symfony form fields override default values set on the Entity class. Meaning, your schema for your DB can have a default value defined but if you leave a non-required field empty when submitting your form, the form->handleRequest() inside your form->isValid() method will override those default values on your Entity class and set them to the input field values. If the input field values are blank, then it will set the Entity property to null.

http://symfony.com/doc/current/book/forms.html#handling-form-submissions

My Workaround

Set the default value on your controller after form->handleRequest() inside your form->isValid() method:

...
if ($myEntity->getMyColumn() === null) {
    $myEntity->setMyColumn('myDefaultValue');
}
...

Not a beautiful solution but it works. I could probably make a validation group but there may be people that see this issue as a data transformation rather than data validation, I leave it to you to decide.

Override Setter (Does Not Work)

I also tried to override the Entity setter this way:

...
/**
 * Set myColumn
 *
 * @param string $myColumn
 *
 * @return myEntity
 */
public function setMyColumn($myColumn)
{
    $this->myColumn = ($myColumn === null || $myColumn === '') ? 'myDefaultValue' : $myColumn;

    return $this;
}
...

This, even though it looks cleaner, it doesn't work. The reason being that the evil form->handleRequest() method does not use the Model's setter methods to update the data (dig into form->setData() for more details).

If the project is Maven, you can try this way :

1. right click the "Maven Dependencies"-->"Build Path"-->"Remove from the build path";
2. right click the project ,navigate to "Maven"--->"Update project....";

Then the import issue should be solved .

To add to the above correct answer :- For my case in shell, this code worked (working on sqoop)

ROOT_PATH="path/to/the/folder"
--options-file  $ROOT_PATH/query.txt

Assuming you use the declarative style (i.e. ORM classes), it is pretty easy:

query = db_session.query(User.id, User.name).filter(User.id.in_([123,456]))
results = query.all()

db_session is your database session here, while User is the ORM class with __tablename__ equal to "users".

div {
    height: 256px;
    width: 256px;
    display: table-cell;
    text-align: center;
    line-height: 256px;
}

The trick is to set the line-height equal to the height of the div.

Might be already answered, but you can try this simple program to determine if and what installation of boost you have :

#include<boost/version.hpp>
#include<iostream>
using namespace std;
int main()
{
cout<<BOOST_VERSION<<endl;
return 0;
}

In my case, the solution was to use an absolute path, to find an existing file:

import os.path
filepath = os.path.abspath(filepath)
# Leave this out if the file doesn't exist yet
assert os.path.exists(filepath), "The file doesn't exist"
conn = sqlite3.connect(filepath)

I don't know why this fix works: the path only contained ASCII characters and no spaces. Still it made the difference.

For reference: Windows 7, Python 3.6.5 (64-bit).

I was not able to reproduce the issue on another machine (also Windows 7, Python 3.6.4 64-bit), so I have no idea why this fix works.

Maybe, you can use moment.js which in my opinion is the best JavaScript library for parsing, formatting and working with dates client-side. You could use something like:

var momentDate = moment('1890-09-30T23:59:59+01:16:20', 'YYYY-MM-DDTHH:mm:ss+-HH:mm:ss');_x000D_
var jsDate = momentDate.toDate();_x000D_
_x000D_
// Now, you can run any JavaScript Date method_x000D_
_x000D_
jsDate.toLocaleString();

The advantage of using a library like moment.js is that your code will work perfectly even in legacy browsers like IE 8+.

Here is the documenation about parsing methods: https://momentjs.com/docs/#/parsing/

View - Layout and View - Groups will do in latest Sublime 3

eg:

Shift+Alt+2 --> creates 2 columns

Ctrl+2 --> move selected file to column 2

This is for side by side comparison. For actual diff, there is the diff function other already mentioned. Unfortunately, I can't find a way to make columns scroll at the same time, which would be a nice feature.

If you want all of the values, use this:

dict_name_goes_here.values()

If you want all of the keys, use this:

dict_name_goes_here.keys()

IF you want all of the items (both keys and values), I would use this:

dict_name_goes_here.items()

In your config.ini file of eclipse eclipse\configuration\config.ini check this three things:

osgi.framework=file\:plugins\\org.eclipse.osgi_3.4.2.R34x_v20080826-1230.jar
osgi.bundles=reference\:file\:org.eclipse.equinox.simpleconfigurator_1.0.0.v20080604.jar@1\:start
org.eclipse.equinox.simpleconfigurator.configUrl=file\:org.eclipse.equinox.simpleconfigurator\\bundles.info

And check whether these jars are in place or not, the jar files depend upon your version of eclipse .

As @EvgeniSergeev says in the comments to the OP, you can import code from a .py file at an arbitrary location with:

import imp

foo = imp.load_source('module.name', '/path/to/file.py')
foo.MyClass()

This is taken from this SO answer.

The only difference between the RANK() and DENSE_RANK() functions is in cases where there is a “tie”; i.e., in cases where multiple values in a set have the same ranking. In such cases, RANK() will assign non-consecutive “ranks” to the values in the set (resulting in gaps between the integer ranking values when there is a tie), whereas DENSE_RANK() will assign consecutive ranks to the values in the set (so there will be no gaps between the integer ranking values in the case of a tie).

For example, consider the set {25, 25, 50, 75, 75, 100}. For such a set, RANK() will return {1, 1, 3, 4, 4, 6} (note that the values 2 and 5 are skipped), whereas DENSE_RANK() will return {1,1,2,3,3,4}.

key = cv2.waitKey(1)

This is from the openCV package. It detects a keypress without waiting.

I guess problem is in width attributes in table and td remove 'px' for example

<table border="0" cellpadding="0" cellspacing="0" width="580px" style="background-color: #0290ba;">

Should be

<table border="0" cellpadding="0" cellspacing="0" width="580" style="background-color: #0290ba;">

To open in a new tab use:

target = "_blank"

To open in the same tab use:

target = "_self"

Checking the documentation shows that its returns false on an error. So use the return status rather than or die(). It will return false if it fails, which you can log (or whatever you want to do) and then continue.

$rv = mysql_query("INSERT INTO redirects SET ua_string = '$ua_string'");
if ( $rv === false ){
     //handle the error here
}
//page continues loading

Programs written in other languages (e.g. C) have to do special magic (called double-forking) expressly to detach from the terminal (and to prevent zombie processes). So, I think the best solution is to emulate them.

A plus of re-executing your program is, you can choose redirections on the command-line, e.g. /usr/bin/python mycoolscript.py 2>&1 1>/dev/null

See this post for more info: What is the reason for performing a double fork when creating a daemon?

I got a perfect solution:

$('#Date_of_Birth').datepicker().on('changeDate', function (e) {
    if(e.viewMode === 'days')
        $(this).blur();
});

This was OK for me:

this.conn = (Connection)DriverManager
    .getConnection(url + dbName + "?useSSL=false", userName, password);

php.ini:

xdebug.max_nesting_level = -1

I'm not entirely sure if the value will ever overflow and reach -1, but it'll either never reach -1, or it'll set the max_nesting_level pretty high.

The accepted answer correctly describes how the list should be declared and is highly recommended for most scenarios.

But I came across a different scenario, which also covers the question asked. What if you have to use an existing object list, like ViewData["htmlAttributes"] in MVC? How can you access its properties (they are usually created via new { @style="width: 100px", ... })?

For this slightly different scenario I want to share with you what I found out. In the solutions below, I am assuming the following declaration for nodes:

List<object> nodes = new List<object>();

nodes.Add(
new
{
    Checked = false,
    depth = 1,
    id = "div_1" 
});

1. Solution with dynamic

In C# 4.0 and higher versions, you can simply cast to dynamic and write:

if (nodes.Any(n => ((dynamic)n).Checked == false))
    Console.WriteLine("found a  not checked  element!");

Note: This is using late binding, which means it will recognize only at runtime if the object doesn't have a Checked property and throws a RuntimeBinderException in this case - so if you try to use a non-existing Checked2 property you would get the following message at runtime: "'<>f__AnonymousType0<bool,int,string>' does not contain a definition for 'Checked2'".

2. Solution with reflection

The solution with reflection works both with old and new C# compiler versions. For old C# versions please regard the hint at the end of this answer.

Background

As a starting point, I found a good answer here. The idea is to convert the anonymous data type into a dictionary by using reflection. The dictionary makes it easy to access the properties, since their names are stored as keys (you can access them like myDict["myProperty"]).

Inspired by the code in the link above, I created an extension class providing GetProp, UnanonymizeProperties and UnanonymizeListItems as extension methods, which simplify access to anonymous properties. With this class you can simply do the query as follows:

if (nodes.UnanonymizeListItems().Any(n => (bool)n["Checked"] == false))
{
    Console.WriteLine("found a  not checked  element!");
}

or you can use the expression nodes.UnanonymizeListItems(x => (bool)x["Checked"] == false).Any() as if condition, which filters implicitly and then checks if there are any elements returned.

To get the first object containing "Checked" property and return its property "depth", you can use:

var depth = nodes.UnanonymizeListItems()
             ?.FirstOrDefault(n => n.Contains("Checked")).GetProp("depth");

or shorter: nodes.UnanonymizeListItems()?.FirstOrDefault(n => n.Contains("Checked"))?["depth"];

Note: If you have a list of objects which don't necessarily contain all properties (for example, some do not contain the "Checked" property), and you still want to build up a query based on "Checked" values, you can do this:

if (nodes.UnanonymizeListItems(x => { var y = ((bool?)x.GetProp("Checked", true)); 
                                      return y.HasValue && y.Value == false;}).Any())
{
    Console.WriteLine("found a  not checked   element!");
}

This prevents, that a KeyNotFoundException occurs if the "Checked" property does not exist.

The class below contains the following extension methods:

• UnanonymizeProperties: Is used to de-anonymize the properties contained in an object. This method uses reflection. It converts the object into a dictionary containing the properties and its values.
• UnanonymizeListItems: Is used to convert a list of objects into a list of dictionaries containing the properties. It may optionally contain a lambda expression to filter beforehand.
• GetProp: Is used to return a single value matching the given property name. Allows to treat not-existing properties as null values (true) rather than as KeyNotFoundException (false)

For the examples above, all that is required is that you add the extension class below:

public static class AnonymousTypeExtensions
{
    // makes properties of object accessible 
    public static IDictionary UnanonymizeProperties(this object obj)
    {
        Type type = obj?.GetType();
        var properties = type?.GetProperties()
               ?.Select(n => n.Name)
               ?.ToDictionary(k => k, k => type.GetProperty(k).GetValue(obj, null));
        return properties;
    }
    
    // converts object list into list of properties that meet the filterCriteria
    public static List<IDictionary> UnanonymizeListItems(this List<object> objectList, 
                    Func<IDictionary<string, object>, bool> filterCriteria=default)
    {
        var accessibleList = new List<IDictionary>();
        foreach (object obj in objectList)
        {
            var props = obj.UnanonymizeProperties();
            if (filterCriteria == default
               || filterCriteria((IDictionary<string, object>)props) == true)
            { accessibleList.Add(props); }
        }
        return accessibleList;
    }

    // returns specific property, i.e. obj.GetProp(propertyName)
    // requires prior usage of AccessListItems and selection of one element, because
    // object needs to be a IDictionary<string, object>
    public static object GetProp(this object obj, string propertyName, 
                                 bool treatNotFoundAsNull = false)
    {
        try 
        {
            return ((System.Collections.Generic.IDictionary<string, object>)obj)
                   ?[propertyName];
        }
        catch (KeyNotFoundException)
        {
            if (treatNotFoundAsNull) return default(object); else throw;
        }
    }
}

Hint: The code above is using the null-conditional operators, available since C# version 6.0 - if you're working with older C# compilers (e.g. C# 3.0), simply replace ?. by . and ?[ by [ everywhere (and do the null-handling traditionally by using if statements or catch NullReferenceExceptions), e.g.

var depth = nodes.UnanonymizeListItems()
            .FirstOrDefault(n => n.Contains("Checked"))["depth"];

As you can see, the null-handling without the null-conditional operators would be cumbersome here, because everywhere you removed them you have to add a null check - or use catch statements where it is not so easy to find the root cause of the exception resulting in much more - and hard to read - code.

If you're not forced to use an older C# compiler, keep it as is, because using null-conditionals makes null handling much easier.

Note: Like the other solution with dynamic, this solution is also using late binding, but in this case you're not getting an exception - it will simply not find the element if you're referring to a non-existing property, as long as you keep the null-conditional operators.

What might be useful for some applications is that the property is referred to via a string in solution 2, hence it can be parameterized.

If you are looking for a range of columns, you can try this:

df.iloc[7:] = df.iloc[7:].astype(float)

The examples above will convert type to be float, for all the columns begin with the 7th to the end. You of course can use different type or different range.

I think this is useful when you have a big range of columns to convert and a lot of rows. It doesn't make you go over each row by yourself - I believe numpy do it more efficiently.

This is useful only if you know that all the required columns contain numbers only - it will not change "bad values" (like string) to be NaN for you.

Here I found this article which is send post request using JsonConvert.SerializeObject() & StringContent() to HttpClient.PostAsync data

static async Task Main(string[] args)
{
    var person = new Person();
    person.Name = "John Doe";
    person.Occupation = "gardener";

    var json = Newtonsoft.Json.JsonConvert.SerializeObject(person);
    var data = new System.Net.Http.StringContent(json, Encoding.UTF8, "application/json");

    var url = "https://httpbin.org/post";
    using var client = new HttpClient();

    var response = await client.PostAsync(url, data);

    string result = response.Content.ReadAsStringAsync().Result;
    Console.WriteLine(result);
}

Storing files in your database will lead to a huge database size. You may not like that, for development, testing, backups, etc.

Instead, you'd use FileStream (SQL-Server) or BFILE (Oracle).

There is no default-implementation of BFILE/FileStream in Postgres, but you can add it: https://github.com/darold/external_file

And further information (in french) can be obtained here:
http://blog.dalibo.com/2015/01/26/Extension_BFILE_pour_PostgreSQL.html

To answer the acual question:
Apart from bytea, for really large files, you can use LOBS:

// http://stackoverflow.com/questions/14509747/inserting-large-object-into-postgresql-returns-53200-out-of-memory-error
// https://github.com/npgsql/Npgsql/wiki/User-Manual
public int InsertLargeObject()
{
    int noid;
    byte[] BinaryData = new byte[123];

    // Npgsql.NpgsqlCommand cmd ;
    // long lng = cmd.LastInsertedOID;

    using (Npgsql.NpgsqlConnection connection = new Npgsql.NpgsqlConnection(GetConnectionString()))
    {
        using (Npgsql.NpgsqlTransaction transaction = connection.BeginTransaction())
        {
            try
            {
                NpgsqlTypes.LargeObjectManager manager = new NpgsqlTypes.LargeObjectManager(connection);
                noid = manager.Create(NpgsqlTypes.LargeObjectManager.READWRITE);
                NpgsqlTypes.LargeObject lo = manager.Open(noid, NpgsqlTypes.LargeObjectManager.READWRITE);

                // lo.Write(BinaryData);
                int i = 0;
                do
                {
                    int length = 1000;
                    if (i + length > BinaryData.Length)
                        length = BinaryData.Length - i;

                    byte[] chunk = new byte[length];
                    System.Array.Copy(BinaryData, i, chunk, 0, length);
                    lo.Write(chunk, 0, length);
                    i += length;
                } while (i < BinaryData.Length);

                lo.Close();
                transaction.Commit();
            } // End Try
            catch
            {
                transaction.Rollback();
                throw;
            } // End Catch

            return noid;
        } // End Using transaction 

    } // End using connection

} // End Function InsertLargeObject 



public System.Drawing.Image GetLargeDrawing(int idOfOID)
{
    System.Drawing.Image img;

    using (Npgsql.NpgsqlConnection connection = new Npgsql.NpgsqlConnection(GetConnectionString()))
    {
        lock (connection)
        {
            if (connection.State != System.Data.ConnectionState.Open)
                connection.Open();

            using (Npgsql.NpgsqlTransaction trans = connection.BeginTransaction())
            {
                NpgsqlTypes.LargeObjectManager lbm = new NpgsqlTypes.LargeObjectManager(connection);
                NpgsqlTypes.LargeObject lo = lbm.Open(takeOID(idOfOID), NpgsqlTypes.LargeObjectManager.READWRITE); //take picture oid from metod takeOID
                byte[] buffer = new byte[32768];

                using (System.IO.MemoryStream ms = new System.IO.MemoryStream())
                {
                    int read;
                    while ((read = lo.Read(buffer, 0, buffer.Length)) > 0)
                    {
                        ms.Write(buffer, 0, read);
                    } // Whend

                    img = System.Drawing.Image.FromStream(ms);
                } // End Using ms

                lo.Close();
                trans.Commit();

                if (connection.State != System.Data.ConnectionState.Closed)
                    connection.Close();
            } // End Using trans

        } // End lock connection

    } // End Using connection

    return img;
} // End Function GetLargeDrawing



public void DeleteLargeObject(int noid)
{
    using (Npgsql.NpgsqlConnection connection = new Npgsql.NpgsqlConnection(GetConnectionString()))
    {
        if (connection.State != System.Data.ConnectionState.Open)
            connection.Open();

        using (Npgsql.NpgsqlTransaction trans = connection.BeginTransaction())
        {
            NpgsqlTypes.LargeObjectManager lbm = new NpgsqlTypes.LargeObjectManager(connection);
            lbm.Delete(noid);

            trans.Commit();

            if (connection.State != System.Data.ConnectionState.Closed)
                connection.Close();
        } // End Using trans 

    } // End Using connection

} // End Sub DeleteLargeObject 

I'm chiming in with a detailed answer that specifically addresses Apache HttpClient 4.0.1. I'm using this HttpClient version, since it's provided by WAS v8.0, and I need to use that provided HttpClient within Apache Wink v1.1.1, also provided by WAS v8.0, to make some NTLM-authenticated REST calls to Sharepoint.

To quote Oleg Kalnichevski on the Apache HttpClient mailing list:

Pretty much all this code is not necessary. (1) HttpClient will automatically release the underlying connection as long as the entity content is consumed to the end of stream; (2) HttpClient will automatically release the underlying connection on any I/O exception thrown while reading the response content. No special processing is required in such as case.

In fact, this is perfectly sufficient to ensure proper release of resources:

HttpResponse rsp = httpclient.execute(target, req); 
HttpEntity entity = rsp.getEntity(); 
if (entity != null) {
     InputStream instream = entity.getContent();
     try {
         // process content
     } finally {
         instream.close();
         // entity.consumeContent() would also do
     } 
}

That is it.

Source

I think the full validate function should look like this:

from datetime import datetime

def validate(date_text):
    try:
        if date_text != datetime.strptime(date_text, "%Y-%m-%d").strftime('%Y-%m-%d'):
            raise ValueError
        return True
    except ValueError:
        return False

Executing just

datetime.strptime(date_text, "%Y-%m-%d") 

is not enough because strptime method doesn't check that month and day of the month are zero-padded decimal numbers. For example

datetime.strptime("2016-5-3", '%Y-%m-%d')

will be executed without errors.

I don't know what your string is, but I'm going to assume that it manages its own memory.

You have two solutions:

1: Return a struct which contains all the types you need.

struct Tuple {
    int a;
    string b;
};

struct Tuple getPair() {
    Tuple r = { 1, getString() };
    return r;
}

void foo() {
    struct Tuple t = getPair();
}

2: Use pointers to pass out values.

void getPair(int* a, string* b) {
    // Check that these are not pointing to NULL
    assert(a);
    assert(b);
    *a = 1;
    *b = getString();
}

void foo() {
    int a, b;
    getPair(&a, &b);
}

Which one you choose to use depends largely on personal preference as to whatever semantics you like more.

Adding exclusions was not enough for me. I had to provide a fake jar:

    <dependency>
        <groupId>ch.qos.logback</groupId>
        <artifactId>logback-classic</artifactId>
        <scope>system</scope>
        <systemPath>${project.basedir}/empty.jar</systemPath>
    </dependency>

On newer kernels you could also possibly use the the /sys/devices/system/cpu/ interface to get a bit more information:

$ ls /sys/devices/system/cpu/
cpu0  cpufreq  kernel_max  offline  possible  present  release
cpu1  cpuidle  modalias    online   power     probe    uevent
$ cat /sys/devices/system/cpu/kernel_max 
255
$ cat /sys/devices/system/cpu/offline 
2-63
$ cat /sys/devices/system/cpu/possible 
0-63
$ cat /sys/devices/system/cpu/present 
0-1
$ cat /sys/devices/system/cpu/online 
0-1

See the official docs for more information on what all these mean.

In a nutshell:

// Instantiate the Shell object and invoke its execute method.
var oShell = new ActiveXObject("Shell.Application");

var commandtoRun = "C:\\Winnt\\Notepad.exe";
if (inputparms != "") {
  var commandParms = document.Form1.filename.value;
}

// Invoke the execute method.  
oShell.ShellExecute(commandtoRun, commandParms, "", "open", "1");

    import java.io.File;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.RandomAccessFile;
    import java.util.UUID;

    import android.content.Context;

    public class Util {
        // ===========================================================
        //
        // ===========================================================

        private static final String INSTALLATION = "INSTALLATION";

        public synchronized static boolean isFirstLaunch(Context context) {
            String sID = null;
            boolean launchFlag = false;
            if (sID == null) {
                File installation = new File(context.getFilesDir(), INSTALLATION);
                try {
                    if (!installation.exists()) {
                    launchFlag = true;                          
                        writeInstallationFile(installation);
                    }
                    sID = readInstallationFile(installation);

                } catch (Exception e) {
                    throw new RuntimeException(e);
                }
            }
            return launchFlag;
        }

        private static String readInstallationFile(File installation) throws IOException {
            RandomAccessFile f = new RandomAccessFile(installation, "r");// read only mode
            byte[] bytes = new byte[(int) f.length()];
            f.readFully(bytes);
            f.close();

            return new String(bytes);
        }

        private static void writeInstallationFile(File installation) throws IOException {
            FileOutputStream out = new FileOutputStream(installation);
            String id = UUID.randomUUID().toString();
            out.write(id.getBytes());
            out.close();
        }
    }

> Usage (in class extending android.app.Activity)

Util.isFirstLaunch(this);

You can do this by using HeidiSQL without generating Db dumps

Steps:

1) Select the database you need to search in from the left panel of GUI.

2) Export > Export Database as SQL

3) In Table Tools window select "FIND TEXT" tab.

4) Provide your string to search and click "FIND".

5) It will list all the tables contains our string.

6) Select the row with higher relevance %.

7) Click "SEE RESULTS"

After some research and modifying my code as below, the script worked for me. I just added the condition:

this.router.navigateByUrl('/RefreshComponent', { skipLocationChange: true }).then(() => {
    this.router.navigate(['Your actualComponent']);
}); 

I had this problem. With my galaxy S2. So came here for advice, but couldn't find anything specific. Then I found this 'Kies' software on the Samsung site, under the section for my exact model of phone, under downloads, after clicking software. It installed the right USB drivers as part of the process of installing Kies and so my phone instantly then became visible on eclipse.

The Kies version for Galaxy S2 (GT I1900) = http://www.samsung.com/uk/support/model/GT-I9100LKAXEU-downloads#

There are other versions of Kies for other android models of course.

Try this

static DataTable ConvertToDatatable(List<Item> list)
{
    DataTable dt = new DataTable();

    dt.Columns.Add("Name");
    dt.Columns.Add("Price");
    dt.Columns.Add("URL");
    foreach (var item in list)
    {
        var row = dt.NewRow();

        row["Name"] = item.Name;
        row["Price"] = Convert.ToString(item.Price);
        row["URL"] = item.URL;

        dt.Rows.Add(row);
    }

    return dt;
}

bsondump collection.bson > collection.json

and then

mongoimport -d <dbname> -c <collection> < collection.json

foreach only works with a single array. To step through multiple arrays, it's better to use the each() function in a while loop:

while(($code = each($codes)) && ($name = each($names))) {
    echo '<option value="' . $code['value'] . '">' . $name['value'] . '</option>';
}

each() returns information about the current key and value of the array and increments the internal pointer by one, or returns false if it has reached the end of the array. This code would not be dependent upon the two arrays having identical keys or having the same sort of elements. The loop terminates when one of the two arrays is finished.

You can use jquery.form.js plugin to upload image via ajax to the server.

http://malsup.com/jquery/form/

Here is the sample jQuery ajax image upload script

(function() {
$('form').ajaxForm({
    beforeSubmit: function() {  
        //do validation here


    },

    beforeSend:function(){
       $('#loader').show();
       $('#image_upload').hide();
    },
    success: function(msg) {

        ///on success do some here
    }
}); })();  

If you have any doubt, please refer following ajax image upload tutorial here

http://www.smarttutorials.net/ajax-image-upload-using-jquery-php-mysql/

I was wondering why nobody suggested the extremely handy Type comparison table. It answers every question about the common functions and compare operators.

A snippet:

Expression      | empty($x)
----------------+--------
$x = "";        | true    
$x = null       | true    
var $x;         | true    
$x is undefined | true    
$x = array();   | true    
$x = false;     | true    
$x = true;      | false   
$x = 1;         | false   
$x = 42;        | false   
$x = 0;         | true    
$x = -1;        | false   
$x = "1";       | false   
$x = "0";       | true    
$x = "-1";      | false   
$x = "php";     | false   
$x = "true";    | false   
$x = "false";   | false   

Along other cheatsheets, I always keep a hardcopy of this table on my desk in case I'm not sure

The problem is that once the page is served up, the content is going to be in the encoding described in the content-type meta tag. The content in "wrong" encoding is already garbled.

You're best to do this on the server before serving up the page. Or as I have been know to say: UTF-8 end-to-end or die.

If you are using Gradle, you could include the dependency like this:

repositories {
    mavenCentral()
}

dependencies {
    compile group: 'com.google.code.findbugs', name: 'jsr305', version: '3.0.0'
}

Well another possible cause of this can be simple line break at end of each line and shebang line If you have been coding in windows IDE its possible that windows has added its own line break at the end of each line and when you try to run it on linux the line break cause problems

Jeff Atwood wrote a blog post (some years ago actually) for customizing VS code editor with custom fonts, background etc...

This may point you to some interesting resources. Here's the link: http://www.codinghorror.com/blog/archives/000682.html

Hope this will help you .

Here is Html code:-

    <body>
    <div ng-controller="MyController" class="container">
      <h1>Modal example</h1>
      <button ng-click="open()" class="btn btn-primary">Test Modal</button>

      <modal title="Login form" visible="showModal">
        <form role="form">

        </form>
      </modal>
    </div>
</body>

AngularJs code:-

var mymodal = angular.module('mymodal', []);

mymodal.controller('MyController', function ($scope) {
    $scope.showModal = false;
    $scope.open = function(){
    $scope.showModal = !$scope.showModal;
    };
  });

mymodal.directive('modal', function () {
    return {
      template: '<div class="modal fade">' + 
          '<div class="modal-dialog">' + 
            '<div class="modal-content">' + 
              '<div class="modal-header">' + 
                '<button type="button" class="close" data-dismiss="modal" aria-hidden="true">&times;</button>' + 
                '<h4 class="modal-title">{{ title }}</h4>' + 
              '</div>' + 
              '<div class="modal-body" ng-transclude></div>' + 
            '</div>' + 
          '</div>' + 
        '</div>',
      restrict: 'E',
      transclude: true,
      replace:true,
      scope:true,
      link: function postLink(scope, element, attrs) {
        scope.title = attrs.title;

        scope.$watch(attrs.visible, function(value){
          if(value == true)
            $(element).modal('show');
          else
            $(element).modal('hide');
        });

        $(element).on('shown.bs.modal', function(){
          scope.$apply(function(){
            scope.$parent[attrs.visible] = true;
          });
        });

        $(element).on('hidden.bs.modal', function(){
          scope.$apply(function(){
            scope.$parent[attrs.visible] = false;
          });
        });
      }
    };
  });

Check this--jsfiddle

You can pass string parameters to JavaScript functions like below code:

I passed three parameters where the third one is a string parameter.

var btn ="<input type='button' onclick='RoomIsReadyFunc(" + ID + "," + RefId + ",\"" + YourString + "\");'  value='Room is Ready' />";

// Your JavaScript function

function RoomIsReadyFunc(ID, RefId, YourString)
{
    alert(ID);
    alert(RefId);
    alert(YourString);
}

Vulgo has the right idea on this thread. I believe his solution is the easiest of the bunch, although his answer could have been a little more in-depth. Here is something that worked for me. I have provided an example.

<h1 id="hello1">Hello World</h1>
<h2 id="hello2">Random</h2>
<button id="click">Click To Hide</button>

<script>

  document.getElementById('click').addEventListener('click', function(){
    doStuff();
  });

  function doStuff() {
    for(var i=1; i<=2; i++){
        var el = document.getElementById("hello" + i);
        el.style.display = 'none';
    }
  }

</script>

Obviously just change the integers in the for loop to account for however many elements you are targeting, which in this example was 2.

If id is the first key in the array, this'll do:

$ids = array_map('current', $users);

You should not necessarily rely on this though. :)

just discovered enumeratum. it's pretty amazing and equally amazing it's not more well known!

Including the header afxwin.h signalizes use of MFC. The following instructions (based on those on CodeProject.com) could help to get MFC code compiling:

1. Download and install the Windows Driver Kit.

2. Select menu Tools > Options… > Projects and Solutions > VC++ Directories.

3. In the drop-down menu Show directories for select Include files.

4. Add the following paths (replace $(WDK_directory) with the directory where you installed Windows Driver Kit in the first step):

   $(WDK_directory)\inc\mfc42
   $(WDK_directory)\inc\atl30
   

   

5. In the drop-down menu Show directories for select Library files and add (replace $(WDK_directory) like before):

   $(WDK_directory)\lib\mfc\i386
   $(WDK_directory)\lib\atl\i386
   

   

6. In the $(WDK_directory)\inc\mfc42\afxwin.inl file, edit the following lines (starting from 1033):

   _AFXWIN_INLINE CMenu::operator==(const CMenu& menu) const
       { return ((HMENU) menu) == m_hMenu; }
   _AFXWIN_INLINE CMenu::operator!=(const CMenu& menu) const
       { return ((HMENU) menu) != m_hMenu; }
   

   to

   _AFXWIN_INLINE BOOL CMenu::operator==(const CMenu& menu) const
       { return ((HMENU) menu) == m_hMenu; }
   _AFXWIN_INLINE BOOL CMenu::operator!=(const CMenu& menu) const
       { return ((HMENU) menu) != m_hMenu; }
   

   In other words, add BOOL after _AFXWIN_INLINE.

Just set the opacity for the inner table. You can do inline CSS if you want it just for a specific table element, so it doesn't apply to the entire table.

style="opacity: 0%;"

If you are doing this in browser there are no character encoding libraries built-in, but you can get by with:

function pad(n) {
    return n.length < 2 ? "0" + n : n;
}

var array = new Uint8Array(data);
var str = "";
for( var i = 0, len = array.length; i < len; ++i ) {
    str += ( "%" + pad(array[i].toString(16)))
}

str = decodeURIComponent(str);

Here's a demo that decodes a 3-byte UTF-8 unit: http://jsfiddle.net/Z9pQE/

A very simple infinite loop.. :)

while true ; do continue ; done

Fr your question it would be:

while true; do foo ; sleep 2 ; done

Download the source code from here (Get Current Location Using Background Service)

AndroidManifest.xml

<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
    package="servicetutorial.service">

    <uses-permission android:name="android.permission.INTERNET"></uses-permission>
    <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"></uses-permission>
    <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"></uses-permission>

    <application
        android:allowBackup="true"
        android:icon="@mipmap/ic_launcher"
        android:label="@string/app_name"
        android:supportsRtl="true"
        android:theme="@style/AppTheme">
        <activity android:name=".MainActivity"
            android:theme="@android:style/Theme.Translucent.NoTitleBar">
            <intent-filter>
                <action android:name="android.intent.action.MAIN" />

                <category android:name="android.intent.category.LAUNCHER" />
            </intent-filter>
        </activity>

        <service android:name=".GoogleService"></service>
    </application>

</manifest>

activity_main.xml

<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent"
    android:background="#ffffff"
    android:layout_height="match_parent">

    <TextView
        android:layout_width="match_parent"
        android:layout_height="50dp"
        android:background="#3F51B5"
        android:text="Location using service"
        android:textColor="#ffffff"
        android:textSize="20dp"
        android:gravity="center"/>

    <LinearLayout
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:layout_centerInParent="true"

        android:orientation="vertical">



    <LinearLayout
        android:layout_width="match_parent"
        android:orientation="horizontal"
        android:layout_height="50dp">

        <TextView
            android:layout_width="150dp"
            android:layout_height="wrap_content"
            android:text="Latitude"
            android:layout_gravity="center_vertical"
            android:layout_marginLeft="10dp"
            android:textColor="#000000"
            android:textSize="20dp"/>
        <TextView
            android:layout_width="wrap_content"
            android:layout_height="wrap_content"
            android:text=""
            android:id="@+id/tv_latitude"
            android:layout_gravity="center_vertical"
            android:layout_marginLeft="10dp"
            android:textColor="#000000"
            android:textSize="20dp"/>


    </LinearLayout>

        <LinearLayout
            android:layout_width="match_parent"
            android:orientation="horizontal"
            android:layout_height="50dp">

            <TextView
                android:layout_width="150dp"
                android:layout_height="wrap_content"
                android:text="Longitude"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>
            <TextView
                android:layout_width="wrap_content"
                android:layout_height="wrap_content"
                android:text=""
                android:id="@+id/tv_longitude"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>


        </LinearLayout>

        <LinearLayout
            android:layout_width="match_parent"
            android:orientation="horizontal"
            android:layout_height="50dp">

            <TextView
                android:layout_width="150dp"
                android:layout_height="wrap_content"
                android:text="Address"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>
            <TextView
                android:layout_width="wrap_content"
                android:layout_height="wrap_content"
                android:text=""
                android:id="@+id/tv_address"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>


        </LinearLayout>

        <LinearLayout
            android:layout_width="match_parent"
            android:orientation="horizontal"
            android:layout_height="50dp">

            <TextView
                android:layout_width="150dp"
                android:layout_height="wrap_content"
                android:text="Area"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>
            <TextView
                android:layout_width="wrap_content"
                android:layout_height="wrap_content"
                android:text=""
                android:id="@+id/tv_area"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>


        </LinearLayout>
        <LinearLayout
            android:layout_width="match_parent"
            android:orientation="horizontal"
            android:layout_height="50dp">

            <TextView
                android:layout_width="150dp"
                android:layout_height="wrap_content"
                android:text="Locality"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>
            <TextView
                android:layout_width="wrap_content"
                android:layout_height="wrap_content"
                android:text=""
                android:id="@+id/tv_locality"
                android:layout_gravity="center_vertical"
                android:layout_marginLeft="10dp"
                android:textColor="#000000"
                android:textSize="20dp"/>


        </LinearLayout>

    </LinearLayout>

    <Button
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:id="@+id/btn_start"
        android:text="Get Location"
        android:layout_alignParentBottom="true"/>



</RelativeLayout>

MainActivity.java

package servicetutorial.service;

import android.*;
import android.app.Activity;
import android.app.ActivityManager;
import android.content.BroadcastReceiver;
import android.content.Context;
import android.content.Intent;
import android.content.IntentFilter;
import android.content.SharedPreferences;
import android.content.pm.PackageManager;
import android.location.Address;
import android.location.Geocoder;
import android.preference.PreferenceManager;
import android.renderscript.Double2;
import android.support.v4.app.ActivityCompat;
import android.support.v4.content.ContextCompat;
import android.support.v7.app.AppCompatActivity;
import android.os.Bundle;
import android.util.Log;
import android.view.View;
import android.widget.Button;
import android.widget.TextView;
import android.widget.Toast;

import java.io.IOException;
import java.util.List;
import java.util.Locale;

public class MainActivity extends Activity {
    Button btn_start;
    private static final int REQUEST_PERMISSIONS = 100;
    boolean boolean_permission;
    TextView tv_latitude, tv_longitude, tv_address,tv_area,tv_locality;
    SharedPreferences mPref;
    SharedPreferences.Editor medit;
    Double latitude,longitude;
    Geocoder geocoder;
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);
        btn_start = (Button) findViewById(R.id.btn_start);
        tv_address = (TextView) findViewById(R.id.tv_address);
        tv_latitude = (TextView) findViewById(R.id.tv_latitude);
        tv_longitude = (TextView) findViewById(R.id.tv_longitude);
        tv_area = (TextView)findViewById(R.id.tv_area);
        tv_locality = (TextView)findViewById(R.id.tv_locality);
        geocoder = new Geocoder(this, Locale.getDefault());
        mPref = PreferenceManager.getDefaultSharedPreferences(getApplicationContext());
        medit = mPref.edit();


        btn_start.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View v) {
                if (boolean_permission) {

                    if (mPref.getString("service", "").matches("")) {
                        medit.putString("service", "service").commit();

                        Intent intent = new Intent(getApplicationContext(), GoogleService.class);
                        startService(intent);

                    } else {
                        Toast.makeText(getApplicationContext(), "Service is already running", Toast.LENGTH_SHORT).show();
                    }
                } else {
                    Toast.makeText(getApplicationContext(), "Please enable the gps", Toast.LENGTH_SHORT).show();
                }

            }
        });

        fn_permission();
    }

    private void fn_permission() {
        if ((ContextCompat.checkSelfPermission(getApplicationContext(), android.Manifest.permission.ACCESS_FINE_LOCATION) != PackageManager.PERMISSION_GRANTED)) {

            if ((ActivityCompat.shouldShowRequestPermissionRationale(MainActivity.this, android.Manifest.permission.ACCESS_FINE_LOCATION))) {


            } else {
                ActivityCompat.requestPermissions(MainActivity.this, new String[]{android.Manifest.permission.ACCESS_FINE_LOCATION

                        },
                        REQUEST_PERMISSIONS);

            }
        } else {
            boolean_permission = true;
        }
    }

    @Override
    public void onRequestPermissionsResult(int requestCode, String[] permissions, int[] grantResults) {
        super.onRequestPermissionsResult(requestCode, permissions, grantResults);

        switch (requestCode) {
            case REQUEST_PERMISSIONS: {
                if (grantResults.length > 0 && grantResults[0] == PackageManager.PERMISSION_GRANTED) {
                    boolean_permission = true;

                } else {
                    Toast.makeText(getApplicationContext(), "Please allow the permission", Toast.LENGTH_LONG).show();

                }
            }
        }
    }

    private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
        @Override
        public void onReceive(Context context, Intent intent) {

            latitude = Double.valueOf(intent.getStringExtra("latutide"));
            longitude = Double.valueOf(intent.getStringExtra("longitude"));

            List<Address> addresses = null;

            try {
                addresses = geocoder.getFromLocation(latitude, longitude, 1);
                String cityName = addresses.get(0).getAddressLine(0);
                String stateName = addresses.get(0).getAddressLine(1);
                String countryName = addresses.get(0).getAddressLine(2);

                tv_area.setText(addresses.get(0).getAdminArea());
                tv_locality.setText(stateName);
                tv_address.setText(countryName);



            } catch (IOException e1) {
                e1.printStackTrace();
            }


            tv_latitude.setText(latitude+"");
            tv_longitude.setText(longitude+"");
            tv_address.getText();


        }
    };

    @Override
    protected void onResume() {
        super.onResume();
        registerReceiver(broadcastReceiver, new IntentFilter(GoogleService.str_receiver));

    }

    @Override
    protected void onPause() {
        super.onPause();
        unregisterReceiver(broadcastReceiver);
    }


}

GoogleService.java

package servicetutorial.service;

import android.app.Service;
import android.content.Context;
import android.content.Intent;
import android.location.Location;
import android.location.LocationListener;
import android.location.LocationManager;
import android.os.Bundle;
import android.os.Handler;
import android.os.IBinder;
import android.support.annotation.Nullable;
import android.util.Log;

import java.util.Timer;
import java.util.TimerTask;

/**
 * Created by deepshikha on 24/11/16.
 */

public class GoogleService extends Service implements LocationListener{

    boolean isGPSEnable = false;
    boolean isNetworkEnable = false;
    double latitude,longitude;
    LocationManager locationManager;
    Location location;
    private Handler mHandler = new Handler();
    private Timer mTimer = null;
    long notify_interval = 1000;
    public static String str_receiver = "servicetutorial.service.receiver";
    Intent intent;




    public GoogleService() {

    }

    @Nullable
    @Override
    public IBinder onBind(Intent intent) {
        return null;
    }

    @Override
    public void onCreate() {
        super.onCreate();

        mTimer = new Timer();
        mTimer.schedule(new TimerTaskToGetLocation(),5,notify_interval);
        intent = new Intent(str_receiver);
//        fn_getlocation();
    }

    @Override
    public void onLocationChanged(Location location) {

    }

    @Override
    public void onStatusChanged(String provider, int status, Bundle extras) {

    }

    @Override
    public void onProviderEnabled(String provider) {

    }

    @Override
    public void onProviderDisabled(String provider) {

    }

    private void fn_getlocation(){
        locationManager = (LocationManager)getApplicationContext().getSystemService(LOCATION_SERVICE);
        isGPSEnable = locationManager.isProviderEnabled(LocationManager.GPS_PROVIDER);
        isNetworkEnable = locationManager.isProviderEnabled(LocationManager.NETWORK_PROVIDER);

        if (!isGPSEnable && !isNetworkEnable){

        }else {

            if (isNetworkEnable){
                location = null;
                locationManager.requestLocationUpdates(LocationManager.NETWORK_PROVIDER,1000,0,this);
                if (locationManager!=null){
                    location = locationManager.getLastKnownLocation(LocationManager.NETWORK_PROVIDER);
                    if (location!=null){

                        Log.e("latitude",location.getLatitude()+"");
                        Log.e("longitude",location.getLongitude()+"");

                        latitude = location.getLatitude();
                        longitude = location.getLongitude();
                        fn_update(location);
                    }
                }

            }


            if (isGPSEnable){
                location = null;
                locationManager.requestLocationUpdates(LocationManager.GPS_PROVIDER,1000,0,this);
                if (locationManager!=null){
                    location = locationManager.getLastKnownLocation(LocationManager.GPS_PROVIDER);
                    if (location!=null){
                        Log.e("latitude",location.getLatitude()+"");
                        Log.e("longitude",location.getLongitude()+"");
                        latitude = location.getLatitude();
                        longitude = location.getLongitude();
                        fn_update(location);
                    }
                }
            }


        }

    }

    private class TimerTaskToGetLocation extends TimerTask{
        @Override
        public void run() {

            mHandler.post(new Runnable() {
                @Override
                public void run() {
                    fn_getlocation();
                }
            });

        }
    }

    private void fn_update(Location location){

        intent.putExtra("latutide",location.getLatitude()+"");
        intent.putExtra("longitude",location.getLongitude()+"");
        sendBroadcast(intent);
    }


}

Add this dependency

compile 'com.google.android.gms:play-services:9.4.0'

I went the way of jQuery's .parseXML() however found that the XML path syntax of 'Page[Name="test"] > controls > test' wouldn't work (if anyone knows why please shout out!).

Instead I chained together the individual .find() results into something that looked like this:

$xmlDoc.find('Page[Name="test"]')
       .find('contols')
       .find('test')

The result achieves the same as what I would expect the one shot find.

Cause

This error happened when one or more of your firebase or google play service library is an old version.

Solution

Simply Update all libraries to latest version.

If you have to use the old version (for example for sanctions or other reasons) follow this:

• add googleServices.disableVersionCheck = true to end of your app/build.Gradle file
• run the project and find duplicate library or library with a dependency issue
• add them to exclude for the old(s) library.

Example

// remote config uses the old version
implementation('com.google.firebase:firebase-config:16.1.3') {   
    exclude group: 'com.google.firebase', module: 'firebase-analytics'
    exclude group: 'com.google.firebase', module: 'firebase-analytics-impl'
    exclude group: 'com.google.android.gms', module: 'play-services-measurement'
    exclude group: 'com.google.android.gms', module: 'play-services-measurement-impl'
}
implementation 'com.google.firebase:firebase-analytics:17.4.0'
implementation 'com.google.firebase:firebase-messaging:20.1.6'
implementation 'com.google.firebase:firebase-crashlytics:17.0.0'

echo $_product->getImageUrl();

This method of the Product class should do the trick for you.

If you append json data to query string, and parse it later in web api side. you can parse complex object. It's useful rather than post json object style. This is my solution.

//javascript file 
var data = { UserID: "10", UserName: "Long", AppInstanceID: "100", ProcessGUID: "BF1CC2EB-D9BD-45FD-BF87-939DD8FF9071" };
var request = JSON.stringify(data);
request = encodeURIComponent(request);

doAjaxGet("/ProductWebApi/api/Workflow/StartProcess?data=", request, function (result) {
    window.console.log(result);
});

//webapi file:
[HttpGet]
public ResponseResult StartProcess()
{
    dynamic queryJson = ParseHttpGetJson(Request.RequestUri.Query);
        int appInstanceID = int.Parse(queryJson.AppInstanceID.Value);
    Guid processGUID = Guid.Parse(queryJson.ProcessGUID.Value);
    int userID = int.Parse(queryJson.UserID.Value);
    string userName = queryJson.UserName.Value;
}

//utility function:
public static dynamic ParseHttpGetJson(string query)
{
    if (!string.IsNullOrEmpty(query))
    {
        try
        {
            var json = query.Substring(7, query.Length - 7); //seperate ?data= characters
            json = System.Web.HttpUtility.UrlDecode(json);
            dynamic queryJson = JsonConvert.DeserializeObject<dynamic>(json);

            return queryJson;
        }
        catch (System.Exception e)
        {
            throw new ApplicationException("can't deserialize object as wrong string content!", e);
        }
    }
    else
    {
        return null;
    }
}

Center fixed position element

It will not limit centered element's width less than viewport width, when using margins in flexbox inside centered element (a very good solution by far)

top: 0; left: 0;
transform: translate(calc(50vw - 50%));

Also for centering it vertically

top: 0; left: 0;
transform: translate(calc(50vw - 50%), calc(50vh - 50%));

In app store connect now if we are using ads in our app then we will answer as yes to Does this app use the Advertising Identifier (IDFA)?

further 3 questions will be asked as

if your using just admob then check the first one and leave other two unchecked. Other two options (2nd , 3rd ) will be checked if your using app flyer to show ads. all options are explained with detail here

To tell from the style of your code snippet, I suppose you were using IPython rather than Jupyter Notebook.

In this issue on GitHub, it was made clear by a member of IPython in 2016 that the display of charts would only work when "only work when it's a Jupyter kernel". Thus, the %matplotlib inline would not work.

I was just having the same issue and suggest you use Jupyter Notebook for the visualization.

I believe you are looking for the query functions, isBefore, isSame, and isAfter.

But it's a bit difficult to tell exactly what you're attempting. Perhaps you are just looking to get the difference between the input time and the current time? If so, consider the difference function, diff. For example:

moment().diff(date_time, 'minutes')

A few other things:

• There's an error in the first line:

    var date_time = 2013-03-24 + 'T' + 10:15:20:12 + 'Z'
  

  That's not going to work. I think you meant:

    var date_time = '2013-03-24' + 'T' + '10:15:20:12' + 'Z';
  

  Of course, you might as well:

    var date_time = '2013-03-24T10:15:20:12Z';
  

• You're using: .tz('UTC') incorrectly. .tz belongs to moment-timezone. You don't need to use that unless you're working with other time zones, like America/Los_Angeles.

  If you want to parse a value as UTC, then use:

    moment.utc(theStringToParse)
  

  Or, if you want to parse a local value and convert it to UTC, then use:

    moment(theStringToParse).utc()
  

  Or perhaps you don't need it at all. Just because the input value is in UTC, doesn't mean you have to work in UTC throughout your function.

• You seem to be getting the "now" instance by moment(new Date()). You can instead just use moment().

Updated

Based on your edit, I think you can just do this:

var date_time = req.body.date + 'T' + req.body.time + 'Z';
var isafter = moment(date_time).isAfter('2014-03-24T01:14:00Z');

Or, if you would like to ensure that your fields are validated to be in the correct format:

var m = moment.utc(req.body.date + ' ' + req.body.time, "YYYY-MM-DD  HH:mm:ss");
var isvalid = m.isValid();
var isafter = m.isAfter('2014-03-24T01:14:00Z');

For demo code that conforms to POSIX standard as described in Setting Terminal Modes Properly and Serial Programming Guide for POSIX Operating Systems, the following is offered.
This code should execute correctly using Linux on x86 as well as ARM (or even CRIS) processors.
It's essentially derived from the other answer, but inaccurate and misleading comments have been corrected.

This demo program opens and initializes a serial terminal at 115200 baud for non-canonical mode that is as portable as possible.
The program transmits a hardcoded text string to the other terminal, and delays while the output is performed.
The program then enters an infinite loop to receive and display data from the serial terminal.
By default the received data is displayed as hexadecimal byte values.

To make the program treat the received data as ASCII codes, compile the program with the symbol DISPLAY_STRING, e.g.

 cc -DDISPLAY_STRING demo.c

If the received data is ASCII text (rather than binary data) and you want to read it as lines terminated by the newline character, then see this answer for a sample program.

#define TERMINAL    "/dev/ttyUSB0"

#include <errno.h>
#include <fcntl.h> 
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <termios.h>
#include <unistd.h>

int set_interface_attribs(int fd, int speed)
{
    struct termios tty;

    if (tcgetattr(fd, &tty) < 0) {
        printf("Error from tcgetattr: %s\n", strerror(errno));
        return -1;
    }

    cfsetospeed(&tty, (speed_t)speed);
    cfsetispeed(&tty, (speed_t)speed);

    tty.c_cflag |= (CLOCAL | CREAD);    /* ignore modem controls */
    tty.c_cflag &= ~CSIZE;
    tty.c_cflag |= CS8;         /* 8-bit characters */
    tty.c_cflag &= ~PARENB;     /* no parity bit */
    tty.c_cflag &= ~CSTOPB;     /* only need 1 stop bit */
    tty.c_cflag &= ~CRTSCTS;    /* no hardware flowcontrol */

    /* setup for non-canonical mode */
    tty.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR | ICRNL | IXON);
    tty.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
    tty.c_oflag &= ~OPOST;

    /* fetch bytes as they become available */
    tty.c_cc[VMIN] = 1;
    tty.c_cc[VTIME] = 1;

    if (tcsetattr(fd, TCSANOW, &tty) != 0) {
        printf("Error from tcsetattr: %s\n", strerror(errno));
        return -1;
    }
    return 0;
}

void set_mincount(int fd, int mcount)
{
    struct termios tty;

    if (tcgetattr(fd, &tty) < 0) {
        printf("Error tcgetattr: %s\n", strerror(errno));
        return;
    }

    tty.c_cc[VMIN] = mcount ? 1 : 0;
    tty.c_cc[VTIME] = 5;        /* half second timer */

    if (tcsetattr(fd, TCSANOW, &tty) < 0)
        printf("Error tcsetattr: %s\n", strerror(errno));
}


int main()
{
    char *portname = TERMINAL;
    int fd;
    int wlen;
    char *xstr = "Hello!\n";
    int xlen = strlen(xstr);

    fd = open(portname, O_RDWR | O_NOCTTY | O_SYNC);
    if (fd < 0) {
        printf("Error opening %s: %s\n", portname, strerror(errno));
        return -1;
    }
    /*baudrate 115200, 8 bits, no parity, 1 stop bit */
    set_interface_attribs(fd, B115200);
    //set_mincount(fd, 0);                /* set to pure timed read */

    /* simple output */
    wlen = write(fd, xstr, xlen);
    if (wlen != xlen) {
        printf("Error from write: %d, %d\n", wlen, errno);
    }
    tcdrain(fd);    /* delay for output */


    /* simple noncanonical input */
    do {
        unsigned char buf[80];
        int rdlen;

        rdlen = read(fd, buf, sizeof(buf) - 1);
        if (rdlen > 0) {
#ifdef DISPLAY_STRING
            buf[rdlen] = 0;
            printf("Read %d: \"%s\"\n", rdlen, buf);
#else /* display hex */
            unsigned char   *p;
            printf("Read %d:", rdlen);
            for (p = buf; rdlen-- > 0; p++)
                printf(" 0x%x", *p);
            printf("\n");
#endif
        } else if (rdlen < 0) {
            printf("Error from read: %d: %s\n", rdlen, strerror(errno));
        } else {  /* rdlen == 0 */
            printf("Timeout from read\n");
        }               
        /* repeat read to get full message */
    } while (1);
}

For an example of an efficient program that provides buffering of received data yet allows byte-by-byte handing of the input, then see this answer.

sumr is implemented in terms of foldRight:

 final def sumr(implicit A: Monoid[A]): A = F.foldRight(self, A.zero)(A.append) 

foldRight is not always tail recursive, so you can overflow the stack if the collection is too long. See Why foldRight and reduceRight are NOT tail recursive? for some more discussion of when this is or isn't true.

You need to get id from:

youtube.com/watch?v=VIDEO_ID

And put this in:

i.ytimg.com/vi/VIDEO_ID/maxresdefault.jpg

I hope that I helped :D

You might be interested in the StringTokenizer class. However, the java docs advise that you use the .split method as StringTokenizer is a legacy class.

As others have said, you posted 3 characters instead of one. I suggest you run this little snippet of code to see what's actually in your string:

public static void dumpString(String text)
{
    for (int i=0; i < text.length(); i++)
    {
        System.out.println("U+" + Integer.toString(text.charAt(i), 16) 
                           + " " + text.charAt(i));
    }
}

If you post the results of that, it'll be easier to work out what's going on. (I haven't bothered padding the string - we can do that by inspection...)

for nested arrays you can use:

$data = [
  'name[0]' = 'value 1',
  'name[1]' = 'value 2',
  'name[2]' = 'value 3',
  'id' = 'value 4',
  ....
];

An alternative solution is to simply add a route to your routes.rb

It basically catches the Apple request and renders a 404 back to the client. This way your log files aren't cluttered.

# routes.rb at the near-end
match '/:png', via: :get, controller: 'application', action: 'apple_touch_not_found', png: /apple-touch-icon.*\.png/

then add a method 'apple_touch_not_found' to your application_controller.rb

# application_controller.rb
def apple_touch_not_found
  render  plain: 'apple-touch icons not found', status: 404
end

In Content page you can access the label and set the text such as

Here 'lblStatus' is the your master page label ID

Label lblMasterStatus = (Label)Master.FindControl("lblStatus");

lblMasterStatus.Text  = "Meaasage from content page";

There are two ways:

1. Use the axes methods of the subplot object (e.g. ax.set_xticks and ax.set_xticklabels) or
2. Use plt.sca to set the current axes for the pyplot state machine (i.e. the plt interface).

As an example (this also illustrates using setp to change the properties of all of the subplots):

import matplotlib.pyplot as plt

fig, axes = plt.subplots(nrows=3, ncols=4)

# Set the ticks and ticklabels for all axes
plt.setp(axes, xticks=[0.1, 0.5, 0.9], xticklabels=['a', 'b', 'c'],
        yticks=[1, 2, 3])

# Use the pyplot interface to change just one subplot...
plt.sca(axes[1, 1])
plt.xticks(range(3), ['A', 'Big', 'Cat'], color='red')

fig.tight_layout()
plt.show()

Other answers wasn't working for me so i developed solution:

I created option with class="option-item" for easy targeting

HTML :

<select id="select-test">
<option value="5-val" id="first-id" class="option-item"> First option </option>
</select>

Then for every selected option i added display none property

CSS:

option:checked {
   display: none;
}

Now we can add change to our SelectBox to find our selected option with display none property by simple :hidden attribute

JQuery:

$('#select-test').change(function(){
//value 
    $('#select-test').find('.option-item:hidden').val();
//id
    $('#select-test').find('.option-item:hidden').attr('id');
//text
    $('#select-test').find('.option-item:hidden').text();
});

Working fiddle: https://jsfiddle.net/Friiz/2dk4003j/10/

I think you're getting confused about what can hold what in JSON.Net.

• A JToken is a generic representation of a JSON value of any kind. It could be a string, object, array, property, etc.
• A JProperty is a single JToken value paired with a name. It can only be added to a JObject, and its value cannot be another JProperty.
• A JObject is a collection of JProperties. It cannot hold any other kind of JToken directly.

In your code, you are attempting to add a JObject (the one containing the "banana" data) to a JProperty ("orange") which already has a value (a JObject containing {"colour":"orange","size":"large"}). As you saw, this will result in an error.

What you really want to do is add a JProperty called "banana" to the JObject which contains the other fruit JProperties. Here is the revised code:

JObject foodJsonObj = JObject.Parse(jsonText);
JObject fruits = foodJsonObj["food"]["fruit"] as JObject;
fruits.Add("banana", JObject.Parse(@"{""colour"":""yellow"",""size"":""medium""}"));

If you want to know the location of you NPM packages, you should:

which npm // locate a program file in the user's path SEE man which
// OUTPUT SAMPLE
/usr/local/bin/npm
la /usr/local/bin/npm // la: aliased to ls -lAh SEE which la THEN man ls
lrwxr-xr-x  1 t04435  admin    46B 18 Sep 10:37 /usr/local/bin/npm -> /usr/local/lib/node_modules/npm/bin/npm-cli.js

So given that npm is a NODE package itself, it is installed in the same location as other packages(EUREKA). So to confirm you should cd into node_modules and list the directory.

cd /usr/local/lib/node_modules/
ls
#SAMPLE OUTPUT
@angular npm .... all global npm packages installed

OR

npm root -g

As per @anthonygore 's comment

I'm personally very fond of Inconsolata

String dir="/Attendancesystem";

 public void displaypdf() {

        File file = null;
            file = new File(Environment.getExternalStorageDirectory()+dir+ "/sample.pdf");
        Toast.makeText(getApplicationContext(), file.toString() , Toast.LENGTH_LONG).show();
        if(file.exists()) {
            Intent target = new Intent(Intent.ACTION_VIEW);
            target.setDataAndType(Uri.fromFile(file), "application/pdf");
            target.setFlags(Intent.FLAG_ACTIVITY_NO_HISTORY);

            Intent intent = Intent.createChooser(target, "Open File");
            try {
                startActivity(intent);
            } catch (ActivityNotFoundException e) {
                // Instruct the user to install a PDF reader here, or something
            }
        }
        else
            Toast.makeText(getApplicationContext(), "File path is incorrect." , Toast.LENGTH_LONG).show();
    }

Came across the same problem. Fixed it by adding to my controller:

      skip_before_filter :verify_authenticity_token, if: :json_request?

In my case, restarting SQL Server 2014 (on my development server) fixed the issue.

Replace void *disconnectFunc; with void (*disconnectFunc)(); to declare function pointer type variable. Or even better use a typedef:

typedef void (*func_t)(); // pointer to function with no args and void return
...
func_t fptr; // variable of pointer to function
...
void D::setDisconnectFunc( func_t func )
{
    fptr = func;
}

void D::disconnected()
{
    fptr();
    connected = false;
}

You could try

^[0-9]{1,6}$

it should work.

Twitter's bootstrap .span classes are floated to the left so they won't center by usual means. So, if you want it to center your span simply add float:none to your #main rule.

CSS

#main {
 margin:0 auto;
 float:none;
}

you must change Territory and click on save, after one minute your app will be available. No need to Remove from sale

fmin and fmax are only for floating point and double variables.

min and max are template functions that allow comparison of any types, given a binary predicate. They can also be used with other algorithms to provide complex functionality.

I also had to setup connection to 2 datasources from Spring Boot application, and it was not easy - the solution mentioned in the Spring Boot documentation didn't work. After a long digging through the internet I made it work and the main idea was taken from this article and bunch of other places.

The following solution is written in Kotlin and works with Spring Boot 2.1.3 and Hibernate Core 5.3.7. Main issue was that it was not enough just to setup different DataSource configs, but it was also necessary to configure EntityManagerFactory and TransactionManager for both databases.

Here is config for the first (Primary) database:

@Configuration
@EnableJpaRepositories(
    entityManagerFactoryRef = "firstDbEntityManagerFactory",
    transactionManagerRef = "firstDbTransactionManager",
    basePackages = ["org.path.to.firstDb.domain"]
)
@EnableTransactionManagement
class FirstDbConfig {

    @Bean
    @Primary
    @ConfigurationProperties(prefix = "spring.datasource.firstDb")
    fun firstDbDataSource(): DataSource {
        return DataSourceBuilder.create().build()
    }

    @Primary
    @Bean(name = ["firstDbEntityManagerFactory"])
    fun firstDbEntityManagerFactory(
        builder: EntityManagerFactoryBuilder,
        @Qualifier("firstDbDataSource") dataSource: DataSource
    ): LocalContainerEntityManagerFactoryBean {
        return builder
            .dataSource(dataSource)
            .packages(SomeEntity::class.java)
            .persistenceUnit("firstDb")
            // Following is the optional configuration for naming strategy
            .properties(
                singletonMap(
                    "hibernate.naming.physical-strategy",
                    "org.hibernate.boot.model.naming.PhysicalNamingStrategyStandardImpl"
                )
            )
            .build()
    }

    @Primary
    @Bean(name = ["firstDbTransactionManager"])
    fun firstDbTransactionManager(
        @Qualifier("firstDbEntityManagerFactory") firstDbEntityManagerFactory: EntityManagerFactory
    ): PlatformTransactionManager {
        return JpaTransactionManager(firstDbEntityManagerFactory)
    }
}

And this is config for second database:

@Configuration
@EnableJpaRepositories(
    entityManagerFactoryRef = "secondDbEntityManagerFactory",
    transactionManagerRef = "secondDbTransactionManager",
    basePackages = ["org.path.to.secondDb.domain"]
)
@EnableTransactionManagement
class SecondDbConfig {

    @Bean
    @ConfigurationProperties("spring.datasource.secondDb")
    fun secondDbDataSource(): DataSource {
        return DataSourceBuilder.create().build()
    }

    @Bean(name = ["secondDbEntityManagerFactory"])
    fun secondDbEntityManagerFactory(
        builder: EntityManagerFactoryBuilder,
        @Qualifier("secondDbDataSource") dataSource: DataSource
    ): LocalContainerEntityManagerFactoryBean {
        return builder
            .dataSource(dataSource)
            .packages(EntityFromSecondDb::class.java)
            .persistenceUnit("secondDb")
            .build()
    }

    @Bean(name = ["secondDbTransactionManager"])
    fun secondDbTransactionManager(
        @Qualifier("secondDbEntityManagerFactory") secondDbEntityManagerFactory: EntityManagerFactory
    ): PlatformTransactionManager {
        return JpaTransactionManager(secondDbEntityManagerFactory)
    }
}

The properties for datasources are like this:

spring.datasource.firstDb.jdbc-url=
spring.datasource.firstDb.username=
spring.datasource.firstDb.password=

spring.datasource.secondDb.jdbc-url=
spring.datasource.secondDb.username=
spring.datasource.secondDb.password=

Issue with properties was that I had to define jdbc-url instead of url because otherwise I had an exception.

p.s. Also you might have different naming schemes in your databases, which was the case for me. Since Hibernate 5 does not support all previous naming schemes, I had to use solution from this answer - maybe it will also help someone as well.

I added line under under h3 tag like this

<h3 class="home_title">Your title here</h3> 
.home_title{
    display:block;
}
.home_title:after {
    display:block;
    clear:both;
    content : "";
    position: relative;
    left    : 0;
    bottom  : 0;
    max-width:250px;
    height  : 1px;
    width   : 50%;  /* or 100px */
    border-bottom:1px solid #e2000f;
    margin:0 auto;
    padding:4px 0px;
}

Thanks all for your responses. I used HtmlRenderer external dll (library) to achieve the same and found below code for the same.

Here is the code for this

public void ConvertHtmlToImage()
{
   Bitmap m_Bitmap = new Bitmap(400, 600);
   PointF point = new PointF(0, 0);
   SizeF maxSize = new System.Drawing.SizeF(500, 500);
   HtmlRenderer.HtmlRender.Render(Graphics.FromImage(m_Bitmap),
                                           "<html><body><p>This is some html code</p>"
                                           + "<p>This is another html line</p></body>",
                                            point, maxSize);

   m_Bitmap.Save(@"C:\Test.png", ImageFormat.Png);
}

There is nothing wrong with the idea of modifying an element inside a list while traversing it (don't modify the list itself, that's not recommended), but it can be better expressed like this:

for (int i = 0; i < letters.size(); i++) {
    letters.set(i, "D");
}

At the end the whole list will have the letter "D" as its content. It's not a good idea to use an enhanced for loop in this case, you're not using the iteration variable for anything, and besides you can't modify the list's contents using the iteration variable.

Notice that the above snippet is not modifying the list's structure - meaning: no elements are added or removed and the lists' size remains constant. Simply replacing one element by another doesn't count as a structural modification. Here's the link to the documentation quoted by @ZouZou in the comments, it states that:

A structural modification is any operation that adds or deletes one or more elements, or explicitly resizes the backing array; merely setting the value of an element is not a structural modification

Random Number Generator in Android If you want to know about random number generator in android then you should read this article till end. Here you can get all information about random number generator in android. Random Number Generator in Android

You should use this code in your java file.

Random r = new Random();
                    int randomNumber = r.nextInt(100);
                    tv.setText(String.valueOf(randomNumber));

I hope this answer may helpful for you. If you want to read more about this article then you should read this article. Random Number Generator

I think is for prevent the browser's HTML parser from interpreting the <script>, and mainly the </script> as the closing tag of the actual script, however I don't think that using document.write is a excellent idea for evaluating script blocks, why don't use the DOM...

var newScript = document.createElement("script");
...

There is a round available in the Foundation library (it's actually in Darwin, but Foundation imports Darwin and most of the time you'll want to use Foundation instead of using Darwin directly).

import Foundation

users = round(users)

Running your code in a playground and then calling:

print(round(users))

Outputs:

15.0

round() always rounds up when the decimal place is >= .5 and down when it's < .5 (standard rounding). You can use floor() to force rounding down, and ceil() to force rounding up.

If you need to round to a specific place, then you multiply by pow(10.0, number of places), round, and then divide by pow(10, number of places):

Round to 2 decimal places:

let numberOfPlaces = 2.0
let multiplier = pow(10.0, numberOfPlaces)
let num = 10.12345
let rounded = round(num * multiplier) / multiplier
print(rounded)

Outputs:

10.12

Note: Due to the way floating point math works, rounded may not always be perfectly accurate. It's best to think of it more of an approximation of rounding. If you're doing this for display purposes, it's better to use string formatting to format the number rather than using math to round it.

You can create a common volume for all Postgres data

 docker volume create pgdata

or you can set it to the compose file

   version: "3"
   services:
     db:
       image: postgres
       environment:
         - POSTGRES_USER=postgres
         - POSTGRES_PASSWORD=postgress
         - POSTGRES_DB=postgres
       ports:
         - "5433:5432"
       volumes:
         - pgdata:/var/lib/postgresql/data
       networks:
         - suruse
   volumes: 
     pgdata:

It will create volume name pgdata and mount this volume to container's path.

You can inspect this volume

docker volume inspect pgdata

// output will be
[
    {
        "Driver": "local",
        "Labels": {},
        "Mountpoint": "/var/lib/docker/volumes/pgdata/_data",
        "Name": "pgdata",
        "Options": {},
        "Scope": "local"
    }
]

git stash 

did the job, It restored the files that I had deleted using rm instead of git rm.

I did first a checkout of the last hash, but I do not believe it is required.

If the default .m2 is unable to find, maybe someone changed the default path. Issue the following command to find out where is the Maven local repository,

mvn help:evaluate -Dexpression=settings.localRepository

The above command will scan for projects and run some tasks. Final outcome will be like below

As you can see in the picture the maven local repository is C:\Users\INOVA\.m2\repository

Just install the latest version from nondefault repository:

$ sudo add-apt-repository ppa:ubuntu-toolchain-r/test
$ sudo apt-get update
$ sudo apt-get install libstdc++6-4.7-dev

You can use the following steps:

Step 1: Create a requirements.txt with list of packages to be installed. If you want to copy packages in a particular environment, do this

pip freeze >> requirements.txt

else store package names in a file named requirements.txt

Step 2: Execute pip command with this file

pip install -r requirements.txt

You can achieve this using Lodash _.assign function.

library[title] = _.assign({}, {'foregrounds': foregrounds }, {'backgrounds': backgrounds });

// This is my JSON object generated from a database_x000D_
var library = {_x000D_
  "Gold Rush": {_x000D_
    "foregrounds": ["Slide 1", "Slide 2", "Slide 3"],_x000D_
    "backgrounds": ["1.jpg", "", "2.jpg"]_x000D_
  },_x000D_
  "California": {_x000D_
    "foregrounds": ["Slide 1", "Slide 2", "Slide 3"],_x000D_
    "backgrounds": ["3.jpg", "4.jpg", "5.jpg"]_x000D_
  }_x000D_
}_x000D_
_x000D_
// These will be dynamically generated vars from editor_x000D_
var title = "Gold Rush";_x000D_
var foregrounds = ["Howdy", "Slide 2"];_x000D_
var backgrounds = ["1.jpg", ""];_x000D_
_x000D_
function save() {_x000D_
_x000D_
  // If title already exists, modify item_x000D_
  if (library[title]) {_x000D_
_x000D_
    // override one Object with the values of another (lodash)_x000D_
    library[title] = _.assign({}, {_x000D_
      'foregrounds': foregrounds_x000D_
    }, {_x000D_
      'backgrounds': backgrounds_x000D_
    });_x000D_
    console.log(library[title]);_x000D_
_x000D_
    // Save to Database. Then on callback..._x000D_
    // console.log('Changes Saved to <b>' + title + '</b>');_x000D_
  }_x000D_
_x000D_
  // If title does not exist, add new item_x000D_
  else {_x000D_
    // Format it for the JSON object_x000D_
    var item = ('"' + title + '" : {"foregrounds" : ' + foregrounds + ',"backgrounds" : ' + backgrounds + '}');_x000D_
_x000D_
    // THE PROBLEM SEEMS TO BE HERE??_x000D_
    // Error: "Result of expression 'library.push' [undefined] is not a function"_x000D_
    library.push(item);_x000D_
_x000D_
    // Save to Database. Then on callback..._x000D_
    console.log('Added: <b>' + title + '</b>');_x000D_
  }_x000D_
}_x000D_
_x000D_
save();

<script src="https://cdn.jsdelivr.net/npm/[email protected]/lodash.min.js"></script>

Whatever Apple ships as the default gcc in xcode (4.2.1 on 10.6, 4.0.1 before) is well tested (and maintained) by the apple guys and the "standard" to build software with on OS X. Everything else is not, so think twice if you want to develop software, or be gcc/OS X beta tester.

UTF-8 with no BOM currently works for me in Excel Mac 2011 14.3.2.

UTF-8 + BOM kind of works, but BOM rendered as gibberish.

UTF-16 works if you Import the file and complete the wizard, but not if you just double-click it.

You are trying to link objects compiled by different versions of the compiler. That's not supported in modern versions of VS, at least not if you are using the C++ standard library. Different versions of the standard library are binary incompatible and so you need all the inputs to the linker to be compiled with the same version. Make sure you re-compile all the objects that are to be linked.

The compiler error names the objects involved so the information the the question already has the answer you are looking for. Specifically it seems that the static library that you are linking needs to be re-compiled.

So the solution is to recompile Projectname1.lib with VS2012.

You may use the following function to send a status change:

function header_status($statusCode) {
    static $status_codes = null;

    if ($status_codes === null) {
        $status_codes = array (
            100 => 'Continue',
            101 => 'Switching Protocols',
            102 => 'Processing',
            200 => 'OK',
            201 => 'Created',
            202 => 'Accepted',
            203 => 'Non-Authoritative Information',
            204 => 'No Content',
            205 => 'Reset Content',
            206 => 'Partial Content',
            207 => 'Multi-Status',
            300 => 'Multiple Choices',
            301 => 'Moved Permanently',
            302 => 'Found',
            303 => 'See Other',
            304 => 'Not Modified',
            305 => 'Use Proxy',
            307 => 'Temporary Redirect',
            400 => 'Bad Request',
            401 => 'Unauthorized',
            402 => 'Payment Required',
            403 => 'Forbidden',
            404 => 'Not Found',
            405 => 'Method Not Allowed',
            406 => 'Not Acceptable',
            407 => 'Proxy Authentication Required',
            408 => 'Request Timeout',
            409 => 'Conflict',
            410 => 'Gone',
            411 => 'Length Required',
            412 => 'Precondition Failed',
            413 => 'Request Entity Too Large',
            414 => 'Request-URI Too Long',
            415 => 'Unsupported Media Type',
            416 => 'Requested Range Not Satisfiable',
            417 => 'Expectation Failed',
            422 => 'Unprocessable Entity',
            423 => 'Locked',
            424 => 'Failed Dependency',
            426 => 'Upgrade Required',
            500 => 'Internal Server Error',
            501 => 'Not Implemented',
            502 => 'Bad Gateway',
            503 => 'Service Unavailable',
            504 => 'Gateway Timeout',
            505 => 'HTTP Version Not Supported',
            506 => 'Variant Also Negotiates',
            507 => 'Insufficient Storage',
            509 => 'Bandwidth Limit Exceeded',
            510 => 'Not Extended'
        );
    }

    if ($status_codes[$statusCode] !== null) {
        $status_string = $statusCode . ' ' . $status_codes[$statusCode];
        header($_SERVER['SERVER_PROTOCOL'] . ' ' . $status_string, true, $statusCode);
    }
}

You may use it as such:

<?php
header_status(500);

if (that_happened) {
    die("that happened")
}

if (something_else_happened) {
    die("something else happened")
}

update_database();

header_status(200);

private boolean checkDateLimit() {

    long CurrentDateInMilisecond = System.currentTimeMillis(); // Date 1
    long Date1InMilisecond = Date1.getTimeInMillis(); //Date2

    if (CurrentDateInMilisecond <= Date1InMilisecond) {
        return true;
    } else {
        return false;
    }

}

// Convert both date into milisecond value .

Unfortunately everyone has missed the most important difference between the semaphore and the mutex; the concept of "ownership".

Semaphores have no notion of ownership, this means that any thread can release a semaphore (this can lead to many problems in itself but can help with "death detection"). Whereas a mutex does have the concept of ownership (i.e. you can only release a mutex you have acquired).
Ownership is incredibly important for safe programming of concurrent systems. I would always recommend using mutex in preference to a semaphore (but there are performance implications).

Mutexes also may support priority inheritance (which can help with the priority inversion problem) and recursion (eliminating one type of deadlock).

It should also be pointed out that there are "binary" semaphores and "counting/general" semaphores. Java's semaphore is a counting semaphore and thus allows it to be initialized with a value greater than one (whereas, as pointed out, a mutex can only a conceptual count of one). The usefulness of this has been pointed out in other posts.

So to summarize, unless you have multiple resources to manage, I would always recommend the mutex over the semaphore.

For me I got NumberFormatException when trying to deal with the negative numbers. I used the following for the negative and positive numbers.

System.out.println(Integer.parseUnsignedInt("11111111111111111111111111110111", 2));      

Output : -9

If you are sure you are going to get at most a single element that passed the filter (which is guaranteed by your filter), you can use findFirst :

Optional<List> o = id1.entrySet()
                      .stream()
                      .filter( e -> e.getKey() == 1)
                      .map(Map.Entry::getValue)
                      .findFirst();

In the general case, if the filter may match multiple Lists, you can collect them to a List of Lists :

List<List> list = id1.entrySet()
                     .stream()
                     .filter(.. some predicate...)
                     .map(Map.Entry::getValue)
                     .collect(Collectors.toList());

You can enter (for example) text from div into iFrame:

var $iframe = $('#iframe');
$iframe.ready(function() {
    $iframe.contents().find("body").append($('#mytext'));
});

and divs:

<iframe id="iframe"></iframe>
<div id="mytext">Hello!</div>

and JSFiddle demo: link

Try using %0A in the URL, just like you've used %20 instead of the space character.

This is what helped me: Adding specific android platform

What should be done is the following... In my case it was cordova but the same is relevant for ionic, phonegap and other frameworks like these:

1. list all platforms installed for your project: cordova platform list. You'll see something like this:

2. remove the android platform: cordova platform remove android.

3. then add the specific android platform: cordova platform add [email protected].

Good luck! :)

2007 is more powerful with ribbon..:=) To add new series in chart do: Select Chart, then click Design in Chart Tools on the ribbon, On the Design ribbon, select "Select Data" in Data Group, Then you will see the button for Add to add new series.

Hope that will help.

You could use LINQ, but I would go with RemoveAll method. I think that is the one that better expresses your intent.

var integers = new List<int> { 1, 2, 3, 4, 5 };

var remove = new List<int> { 1, 3, 5 };

integers.RemoveAll(i => remove.Contains(i));

One of my projects in my solution was set to Release mode. I changed it back to Debug mode, and the breakpoints are hitting now.

To disable foreign key constraints:

DECLARE @sql NVARCHAR(MAX) = N'';

;WITH x AS 
(
  SELECT DISTINCT obj = 
      QUOTENAME(OBJECT_SCHEMA_NAME(parent_object_id)) + '.' 
    + QUOTENAME(OBJECT_NAME(parent_object_id)) 
  FROM sys.foreign_keys
)
SELECT @sql += N'ALTER TABLE ' + obj + ' NOCHECK CONSTRAINT ALL;
' FROM x;

EXEC sp_executesql @sql;

To re-enable:

DECLARE @sql NVARCHAR(MAX) = N'';

;WITH x AS 
(
  SELECT DISTINCT obj = 
      QUOTENAME(OBJECT_SCHEMA_NAME(parent_object_id)) + '.' 
    + QUOTENAME(OBJECT_NAME(parent_object_id)) 
  FROM sys.foreign_keys
)
SELECT @sql += N'ALTER TABLE ' + obj + ' WITH CHECK CHECK CONSTRAINT ALL;
' FROM x;

EXEC sp_executesql @sql;

However, you will not be able to truncate the tables, you will have to delete from them in the right order. If you need to truncate them, you need to drop the constraints entirely, and re-create them. This is simple to do if your foreign key constraints are all simple, single-column constraints, but definitely more complex if there are multiple columns involved.

Here is something you can try. In order to make this a part of your SSIS package you'll need a place to store the FK definitions while the SSIS package runs (you won't be able to do this all in one script). So in some utility database, create a table:

CREATE TABLE dbo.PostCommand(cmd NVARCHAR(MAX));

Then in your database, you can have a stored procedure that does this:

DELETE other_database.dbo.PostCommand;

DECLARE @sql NVARCHAR(MAX) = N'';

SELECT @sql += N'ALTER TABLE ' + QUOTENAME(OBJECT_SCHEMA_NAME(fk.parent_object_id))
   + '.' + QUOTENAME(OBJECT_NAME(fk.parent_object_id)) 
   + ' ADD CONSTRAINT ' + fk.name + ' FOREIGN KEY (' 
   + STUFF((SELECT ',' + c.name
    FROM sys.columns AS c 
        INNER JOIN sys.foreign_key_columns AS fkc 
        ON fkc.parent_column_id = c.column_id
        AND fkc.parent_object_id = c.[object_id]
    WHERE fkc.constraint_object_id = fk.[object_id]
    ORDER BY fkc.constraint_column_id 
    FOR XML PATH(''), TYPE).value('.', 'nvarchar(max)'), 1, 1, '')
+ ') REFERENCES ' + 
QUOTENAME(OBJECT_SCHEMA_NAME(fk.referenced_object_id))
+ '.' + QUOTENAME(OBJECT_NAME(fk.referenced_object_id))
+ '(' + 
STUFF((SELECT ',' + c.name
    FROM sys.columns AS c 
        INNER JOIN sys.foreign_key_columns AS fkc 
        ON fkc.referenced_column_id = c.column_id
        AND fkc.referenced_object_id = c.[object_id]
    WHERE fkc.constraint_object_id = fk.[object_id]
    ORDER BY fkc.constraint_column_id 
    FOR XML PATH(''), TYPE).value('.', 'nvarchar(max)'), 1, 1, '') + ');
' FROM sys.foreign_keys AS fk
WHERE OBJECTPROPERTY(parent_object_id, 'IsMsShipped') = 0;

INSERT other_database.dbo.PostCommand(cmd) SELECT @sql;

IF @@ROWCOUNT = 1
BEGIN
  SET @sql = N'';

  SELECT @sql += N'ALTER TABLE ' + QUOTENAME(OBJECT_SCHEMA_NAME(fk.parent_object_id))
    + '.' + QUOTENAME(OBJECT_NAME(fk.parent_object_id)) 
    + ' DROP CONSTRAINT ' + fk.name + ';
  ' FROM sys.foreign_keys AS fk;

  EXEC sp_executesql @sql;
END

Now when your SSIS package is finished, it should call a different stored procedure, which does:

DECLARE @sql NVARCHAR(MAX);

SELECT @sql = cmd FROM other_database.dbo.PostCommand;

EXEC sp_executesql @sql;

If you're doing all of this just for the sake of being able to truncate instead of delete, I suggest just taking the hit and running a delete. Maybe use bulk-logged recovery model to minimize the impact of the log. In general I don't see how this solution will be all that much faster than just using a delete in the right order.

In 2014 I published a more elaborate post about this here:

• Drop and Re-Create All Foreign Key Constraints in SQL Server

Add the following to the .navbar-brand class

.navbar-brand
{
  padding: 0px; // this allows the image to occupy all the padding space of the navbar--brand
}

.navbar-brand > img
{
   height: 100%; // set height to occupy full height space on the navbar-brand
   width: auto; // width should be auto to allow img to scale accordingly
   max-height: 100%; // optional
   mrgin: 0 auto; // optional
}

I'd like to plug in some (shallow) reasons I have experienced as follows:

1. we may have updated our dictionary(for NLP tasks) but the model and the prepared data used a different one.
2. we may have reprocessed our data(binary tf_record) but we loaded the old model. The reprocessed data may conflict with the previous one.
3. we may should train the model from scratch but we forgot to delete the checkpoints and the model loaded the latest parameters automatically.

Hope that helps.

dirname(parent.frame(2)$ofile)  

doesn't work for me either, but the following (as suggested in https://stackoverflow.com/a/35842176/992088) works for me in ubuntu 14.04

dirname(rstudioapi::getActiveDocumentContext()$path)

@JS5 , I also faced the same issue as you: ImageButton causing exceptions inside UpdatePanel only on production server and IE. After some research I found this:

There is an issue with ImageButtons and UpdatePanels. The update to .NET 4.5 is fixed there. It has something to do with Microsoft changed the x,y axis of a button click from Int to Double so you can tell where on the button you clicked and it's throwing a conversion error.

Source

I'm using NetFramework 2.0 and IIS 6, so, the suggested solution was to downgrade IE compatibility adding a meta tag:

<meta http-equiv="X-UA-Compatible" content="IE=9" />

I've done this via Page_Load method only on the page I needed to:

Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)
    Dim tag As HtmlMeta = New HtmlMeta()

    tag.HttpEquiv = "X-UA-Compatible"
    tag.Content = "IE=9"

    Header.Controls.Add(tag)
End Sub

Hope this helps someone.

ES8(2017) try

obj = await (await fetch(url)).json();

async function load() {_x000D_
    let url = 'https://my-json-server.typicode.com/typicode/demo/db';_x000D_
    let obj = await (await fetch(url)).json();_x000D_
    console.log(obj);_x000D_
}_x000D_
_x000D_
load();

you can handle errors by try-catch

async function load() {_x000D_
    let url = 'http://query.yahooapis.com/v1/publ...';_x000D_
    let obj = null;_x000D_
    _x000D_
    try {_x000D_
        obj = await (await fetch(url)).json();_x000D_
    } catch(e) {_x000D_
        console.log('error');_x000D_
    }_x000D_
    _x000D_
    console.log(obj);_x000D_
}_x000D_
_x000D_
load();

The following approach seems simple and can be used with variables of different size:

import hickle as hkl
# write variables to filename [a,b,c can be of any size]
hkl.dump([a,b,c], filename)

# load variables from filename
a,b,c = hkl.load(filename)

According to MySQL documentation, you should be able to just enclose that datetime string in single quotes, ('YYYY-MM-DD HH:MM:SS') and it should work. Look here: Date and Time Literals

So, in your case, the command should be as follows:

UPDATE products SET former_date='2011-12-18 13:17:17' WHERE id=1

java.exe is associated with the console, whereas javaw.exe doesn't have any such association. So, when java.exe is run, it automatically opens a command prompt window where output and error streams are shown.

It seems nobody has mentioned how to do this in pure JS using the X-CSRFToken header and {{ csrf_token }}, so here's a simple solution where you don't need to search through the cookies or the DOM:

var xhttp = new XMLHttpRequest();
xhttp.open("POST", url, true);
xhttp.setRequestHeader("X-CSRFToken", "{{ csrf_token }}");
xhttp.send();

To check whether a property exists on a JObject, you can use the square bracket syntax and see whether the result is null or not. If the property exists, a JToken will be always be returned (even if it has the value null in the JSON).

JToken token = jObject["param"];
if (token != null)
{
    // the "param" property exists
}

If you have a JToken in hand and you want to see if it is non-empty, well, that depends on what type of JToken it is and how you define "empty". I usually use an extension method like this:

public static class JsonExtensions
{
    public static bool IsNullOrEmpty(this JToken token)
    {
        return (token == null) ||
               (token.Type == JTokenType.Array && !token.HasValues) ||
               (token.Type == JTokenType.Object && !token.HasValues) ||
               (token.Type == JTokenType.String && token.ToString() == String.Empty) ||
               (token.Type == JTokenType.Null);
    }
}

Just for more one option...You can do it this way too:

MYJSON = {
    'username': 'gula_gut',
    'pics': '/0/myfavourite.jpeg',
    'id': '1'
}

#changing username
MYJSON['username'] = 'calixto'
print(MYJSON['username'])

I hope this can help.

In my case the problem was solved just after changing the random value in the .scss file. After reloading the problem disappeared and the styles began to load well. Simple, but works :P

a do while loop would be a nice way to wait for the user input. Like this:

int main() 
{

 do 
 {
   cout << '\n' << "Press a key to continue...";
 } while (cin.get() != '\n');

 return 0;
}

You can also use the function system('PAUSE') but I think this is a bit slower and platform dependent

Use;

^(19|[2-9][0-9])\d{2}$ 

for years 1900 - 9999.

No need to worry for 9999 and onwards - A.I. will be doing all programming by then !!! Hehehehe

You can test your regex at https://regex101.com/

Also more info about non-capturing groups ( mentioned in one the comments above ) here http://www.manifold.net/doc/radian/why_do_non-capture_groups_exist_.htm

For .Net <= 4.0 Use the TimeSpan class.

TimeSpan t = TimeSpan.FromSeconds( secs );

string answer = string.Format("{0:D2}h:{1:D2}m:{2:D2}s:{3:D3}ms", 
                t.Hours, 
                t.Minutes, 
                t.Seconds, 
                t.Milliseconds);

(As noted by Inder Kumar Rathore) For .NET > 4.0 you can use

TimeSpan time = TimeSpan.FromSeconds(seconds);

//here backslash is must to tell that colon is
//not the part of format, it just a character that we want in output
string str = time .ToString(@"hh\:mm\:ss\:fff");

(From Nick Molyneux) Ensure that seconds is less than TimeSpan.MaxValue.TotalSeconds to avoid an exception.

Board.setPreferredSize(new Dimension(x, y));
.
.
//Main.add(Board, BorderLayout.CENTER);
Main.add(Board, BorderLayout.CENTER);
Main.setLocations(x, y);
Main.pack();
Main.setVisible(true);

If you want to make sure that the library is loaded if and only if the program lunar-calendar-gtk is launched, you can apply this:

You set the environment variable per command by prefixing the command with it:

$ LD_PRELOAD="liblunar-calendar-preload.so" printenv "LD_PRELOAD"
liblunar-calendar-preload.so
$ printenv "LD_PRELOAD"
$

You can then choose to put this in a shell script and make lunar-calendar-gtk a symlink to this shell script, replaceing the original referencee. This effectively makes sure that the library is loaded everytime the original application is executed.

You will have to rename the original lunar-calendar-gtk to something else, which might not be too intriguing as it possibly may cause issues with uninstallation and upgrading. However, I found it useful with a former version of Skype.

I hear that this can be fixed by overwriting your /usr/share/terminfo with one from the computer of somebody with a working install of Lion. I can't confirm whether this works or not, and unfortunately I haven't upgraded yet, so I can't provide you with that file.

I'm on Kali Linux. I had to remove the brew version of postgresql with

brew uninstall postgresql

sudo -u postgres psql got me into root postgres

The code below will clone last row and add after last row in table:

var $tableBody = $('#tbl').find("tbody"),
$trLast = $tableBody.find("tr:last"),
$trNew = $trLast.clone();

$trLast.after($trNew);

Working example : http://jsfiddle.net/kQpfE/2/

Since required quite often it might as well be brief:

=1*(A1="")

This will not return 1 if the cell appears empty but contains say a space or a formula of the kind =IF(B1=3,"Yes","") where B1 does not contain 3.

=A1="" will return either TRUE or FALSE but those in an equation are treated as 1 and 0 respectively so multiplying TRUE by 1 returns 1.

Much the same can be achieved with the double unary --:

=--(A1="")  

where when A1 is empty one minus negates TRUE into -1 and the other negates that to 1 (just + in place of -- however does not change TRUE to 1).

$('input[type=file]').val()

That'll get you the file selected.

However, you can't set the value yourself.

Since 'Kranu' helpfully advises 'The only interaction with the filesystem is with loading js files . . .', that suggests doing so with error checking would at least tell you if the file does not exist - which may be sufficient for your purposes?

From a local machine, you can check whether a file does not exist by attempting to load it as an external script then checking for an error. For example:

<span>File exists? </span>
<SCRIPT>
    function get_error(x){
        document.getElementsByTagName('span')[0].innerHTML+=x+" does not exist.";
    }
    url="   (put your path/file name in here)    ";
    url+="?"+new Date().getTime()+Math.floor(Math.random()*1000000);
    var el=document.createElement('script');
    el.id="123";
    el.onerror=function(){if(el.onerror)get_error(this.id)}
    el.src=url;
    document.body.appendChild(el);
</SCRIPT>

Some notes...

• append some random data to the file name (url+="?"+new Date etc) so that the browser cache doesn't serve an old result.
• set a unique element id (el.id=) if you're using this in a loop, so that the get_error function can reference the correct item.
• setting the onerror (el.onerror=function) line is a tad complex because one needs it to call the get_error function AND pass el.id - if just a normal reference to the function (eg: el.onerror=get_error) were set, then no el.id parameter could be passed.
• remember that this only checks if a file does not exist.

Java version for Sathyaraj's code above:

// Resize
public Bitmap resize(Bitmap img, int newWidth, int newHeight) {
    Bitmap bmap = img.copy(img.getConfig(), true);

    double nWidthFactor = (double) img.getWidth() / (double) newWidth;
    double nHeightFactor = (double) img.getHeight() / (double) newHeight;

    double fx, fy, nx, ny;
    int cx, cy, fr_x, fr_y;
    int color1;
    int color2;
    int color3;
    int color4;
    byte nRed, nGreen, nBlue;

    byte bp1, bp2;

    for (int x = 0; x < bmap.getWidth(); ++x) {
        for (int y = 0; y < bmap.getHeight(); ++y) {

            fr_x = (int) Math.floor(x * nWidthFactor);
            fr_y = (int) Math.floor(y * nHeightFactor);
            cx = fr_x + 1;
            if (cx >= img.getWidth())
                cx = fr_x;
            cy = fr_y + 1;
            if (cy >= img.getHeight())
                cy = fr_y;
            fx = x * nWidthFactor - fr_x;
            fy = y * nHeightFactor - fr_y;
            nx = 1.0 - fx;
            ny = 1.0 - fy;

            color1 = img.getPixel(fr_x, fr_y);
            color2 = img.getPixel(cx, fr_y);
            color3 = img.getPixel(fr_x, cy);
            color4 = img.getPixel(cx, cy);

            // Blue
            bp1 = (byte) (nx * Color.blue(color1) + fx * Color.blue(color2));
            bp2 = (byte) (nx * Color.blue(color3) + fx * Color.blue(color4));
            nBlue = (byte) (ny * (double) (bp1) + fy * (double) (bp2));

            // Green
            bp1 = (byte) (nx * Color.green(color1) + fx * Color.green(color2));
            bp2 = (byte) (nx * Color.green(color3) + fx * Color.green(color4));
            nGreen = (byte) (ny * (double) (bp1) + fy * (double) (bp2));

            // Red
            bp1 = (byte) (nx * Color.red(color1) + fx * Color.red(color2));
            bp2 = (byte) (nx * Color.red(color3) + fx * Color.red(color4));
            nRed = (byte) (ny * (double) (bp1) + fy * (double) (bp2));

            bmap.setPixel(x, y, Color.argb(255, nRed, nGreen, nBlue));
        }
    }

    bmap = setGrayscale(bmap);
    bmap = removeNoise(bmap);

    return bmap;
}

// SetGrayscale
private Bitmap setGrayscale(Bitmap img) {
    Bitmap bmap = img.copy(img.getConfig(), true);
    int c;
    for (int i = 0; i < bmap.getWidth(); i++) {
        for (int j = 0; j < bmap.getHeight(); j++) {
            c = bmap.getPixel(i, j);
            byte gray = (byte) (.299 * Color.red(c) + .587 * Color.green(c)
                    + .114 * Color.blue(c));

            bmap.setPixel(i, j, Color.argb(255, gray, gray, gray));
        }
    }
    return bmap;
}

// RemoveNoise
private Bitmap removeNoise(Bitmap bmap) {
    for (int x = 0; x < bmap.getWidth(); x++) {
        for (int y = 0; y < bmap.getHeight(); y++) {
            int pixel = bmap.getPixel(x, y);
            if (Color.red(pixel) < 162 && Color.green(pixel) < 162 && Color.blue(pixel) < 162) {
                bmap.setPixel(x, y, Color.BLACK);
            }
        }
    }
    for (int x = 0; x < bmap.getWidth(); x++) {
        for (int y = 0; y < bmap.getHeight(); y++) {
            int pixel = bmap.getPixel(x, y);
            if (Color.red(pixel) > 162 && Color.green(pixel) > 162 && Color.blue(pixel) > 162) {
                bmap.setPixel(x, y, Color.WHITE);
            }
        }
    }
    return bmap;
}

Very simple way to sort List with int values in Descending order:

li.Sort((a,b)=> b-a);

Hope that this helps!

There is another way to reset the password through command prompt ...

1) Go to the Oracle Database Folder ( In my case Oracle Database 11g Express Edition) in the START MENU.

2) Within that folder click "Run SQL Commandline"

Oracle Database Folder image

3) Type "connect username/password" (your username and old password without the quotation marks)

4) The message displayed is ...

ERROR: ORA-28001: the password has expired

Changing password for hr

--> New password:

Enter Username, Password image

5) Type the new password

6) Retype the new password

7) Message displayed is ...

Password changed Connected.

SQL>

8) GO TO Sql developer --> type the new password --> connected

i couldn't change the permissions on the sharepoint i'm using but got a round it by uploading .url files with the drag and drop multiple files uploader.

Using the normal upload didn't work because they are intepreted by the file open dialog when you try to open them singly so it just tries to open the target not the .url file.

.url files can be made by saving a favourite with internet exploiter.

In the end the same rules as for css apply.

So I think this reference could be of some valuable use.

Another way to collect uniq columns with sql:

Model.group(:rating).pluck(:rating)

DECIMAL_DIG from <float.h> should give at least a reasonable approximation of that. Since that deals with decimal digits, and it's really stored in binary, you can probably store something a little larger without losing precision, but exactly how much is hard to say. I suppose you should be able to figure it out from FLT_RADIX and DBL_MANT_DIG, but I'm not sure I'd completely trust the result.

The Miro video converter does a beautiful job and is drag-n-drop. http://www.mirovideoconverter.com/

BTW it's FREE and also very good for mobile device encoding.

This works form me to scroll to when I click next

$('#myTable').on('draw.dt', function() {
    document.body.scrollTop = 0;
    document.documentElement.scrollTop = 0;
});

You can use the re module:

import re
re.sub(r'\D', '', '+123-456-7890')

This will replace all non-digits with ''.

settings.py

ALLOWED_HOSTS = ['*']

I believe you need to put the libeay32.dll and ssleay32.dll files in the systems folder

A reproducible example:

the_plot <- function()
{
  x <- seq(0, 1, length.out = 100)
  y <- pbeta(x, 1, 10)
  plot(
    x,
    y,
    xlab = "False Positive Rate",
    ylab = "Average true positive rate",
    type = "l"
  )
}

James's suggestion of using pointsize, in combination with the various cex parameters, can produce reasonable results.

png(
  "test.png",
  width     = 3.25,
  height    = 3.25,
  units     = "in",
  res       = 1200,
  pointsize = 4
)
par(
  mar      = c(5, 5, 2, 2),
  xaxs     = "i",
  yaxs     = "i",
  cex.axis = 2,
  cex.lab  = 2
)
the_plot()
dev.off()

Of course the better solution is to abandon this fiddling with base graphics and use a system that will handle the resolution scaling for you. For example,

library(ggplot2)

ggplot_alternative <- function()
{
  the_data <- data.frame(
    x <- seq(0, 1, length.out = 100),
    y = pbeta(x, 1, 10)
  )

ggplot(the_data, aes(x, y)) +
    geom_line() +
    xlab("False Positive Rate") +
    ylab("Average true positive rate") +
    coord_cartesian(0:1, 0:1)
}

ggsave(
  "ggtest.png",
  ggplot_alternative(),
  width = 3.25,
  height = 3.25,
  dpi = 1200
)

Use the super keyword.

You can check out this post on SuperUser.

Word starts page numbering over for each new section by default.

I do it slightly differently than the post above that goes through the ribbon menus, but in both methods you have to go through the document to each section's beginning.

My method:

• open up the footer (or header if that's where your page number is)
• drag-select the page number
• right-click on it
• hit Format Page Numbers
• click on the Continue from Previous Section radio button under Page numbering

I find this right-click method to be a little faster. Also, usually if I insert the page numbers first before I start making any new sections, this problem doesn't happen in the first place.

Use regular expression to achieve this task. Please refer the below code.

public static void main(String[] args) {
    try {

        BufferedReader reader = new BufferedReader(new InputStreamReader(System.in));
        System.out.print("Enter your content: ");
        String data = reader.readLine();            
        boolean b1 = Pattern.matches("^\\d+$", data);
        boolean b2 = Pattern.matches("[0-9a-zA-Z([+-]?\\d*\\.+\\d*)]*", data); 
        boolean b3 = Pattern.matches("^([+-]?\\d*\\.+\\d*)$", data);
        if(b1) {
            System.out.println("It is integer.");
        } else if(b2) {
            System.out.println("It is String. ");
        } else if(b3) {
            System.out.println("It is Float. ");
        }           
    } catch (IOException ex) {
        Logger.getLogger(TypeOF.class.getName()).log(Level.SEVERE, null, ex);
    }
}

.str.get

This is the simplest to specify string methods

# Setup
df = pd.DataFrame({'A': ['xyz', 'abc', 'foobar'], 'B': [123, 456, 789]})
df

        A    B
0     xyz  123
1     abc  456
2  foobar  789

df.dtypes

A    object
B     int64
dtype: object

For string (read:object) type columns, use

df['C'] = df['A'].str[0]
# Similar to,
df['C'] = df['A'].str.get(0)

.str handles NaNs by returning NaN as the output.

For non-numeric columns, an .astype conversion is required beforehand, as shown in @Ed Chum's answer.

# Note that this won't work well if the data has NaNs. 
# It'll return lowercase "n"
df['D'] = df['B'].astype(str).str[0]

df
        A    B  C  D
0     xyz  123  x  1
1     abc  456  a  4
2  foobar  789  f  7

List Comprehension and Indexing

There is enough evidence to suggest a simple list comprehension will work well here and probably be faster.

# For string columns
df['C'] = [x[0] for x in df['A']]

# For numeric columns
df['D'] = [str(x)[0] for x in df['B']]

df
        A    B  C  D
0     xyz  123  x  1
1     abc  456  a  4
2  foobar  789  f  7

If your data has NaNs, then you will need to handle this appropriately with an if/else in the list comprehension,

df2 = pd.DataFrame({'A': ['xyz', np.nan, 'foobar'], 'B': [123, 456, np.nan]})
df2

        A      B
0     xyz  123.0
1     NaN  456.0
2  foobar    NaN

# For string columns
df2['C'] = [x[0] if isinstance(x, str) else np.nan for x in df2['A']]

# For numeric columns
df2['D'] = [str(x)[0] if pd.notna(x) else np.nan for x in df2['B']]

        A      B    C    D
0     xyz  123.0    x    1
1     NaN  456.0  NaN    4
2  foobar    NaN    f  NaN

Let's do some timeit tests on some larger data.

df_ = df.copy()
df = pd.concat([df_] * 5000, ignore_index=True) 

%timeit df.assign(C=df['A'].str[0])
%timeit df.assign(D=df['B'].astype(str).str[0])

%timeit df.assign(C=[x[0] for x in df['A']])
%timeit df.assign(D=[str(x)[0] for x in df['B']])

12 ms ± 253 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
27.1 ms ± 1.38 ms per loop (mean ± std. dev. of 7 runs, 10 loops each)

3.77 ms ± 110 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
7.84 ms ± 145 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)

List comprehensions are 4x faster.

This example illustrate how to use AJAX to pull resourcess from any website. it works across browsers. i have tested it on IE8-IE10, safari, chrome, firefox, opera.

if (window.XDomainRequest) xmlhttp = new XDomainRequest();
else if (window.XMLHttpRequest) xmlhttp = new XMLHttpRequest();
else xmlhttp = new ActiveXObject("Microsoft.XMLHTTP");

xmlhttp.open("GET", "http://api.hostip.info/get_html.php", false);
xmlhttp.send();

hostipInfo = xmlhttp.responseText.split("\n");
var IP = false;
for (i = 0; hostipInfo.length >= i; i++) {
    if (hostipInfo[i]) {

        ipAddress = hostipInfo[i].split(":");
        if (ipAddress[0] == "IP") {
            IP = ipAddress[1];
        }
    }
}
return IP;

If you use %pylab inline you can (on a new line) insert the following command:

%pylab inline
pylab.rcParams['figure.figsize'] = (10, 6)

This will set all figures in your document (unless otherwise specified) to be of the size (10, 6), where the first entry is the width and the second is the height.

See this SO post for more details. https://stackoverflow.com/a/17231361/1419668

MSDN tells us:

The IntPtr type is designed to be an integer whose size is platform-specific. That is, an instance of this type is expected to be 32-bits on 32-bit hardware and operating systems, and 64-bits on 64-bit hardware and operating systems.

The IntPtr type can be used by languages that support pointers, and as a common means of referring to data between languages that do and do not support pointers.

IntPtr objects can also be used to hold handles. For example, instances of IntPtr are used extensively in the System.IO.FileStream class to hold file handles.

The IntPtr type is CLS-compliant, while the UIntPtr type is not. Only the IntPtr type is used in the common language runtime. The UIntPtr type is provided mostly to maintain architectural symmetry with the IntPtr type.

http://msdn.microsoft.com/en-us/library/system.intptr(VS.71).aspx

Try this

public class Validation {

    public final static boolean isValidEmail(CharSequence target) {
        if (target == null) {
        return false;
        } else {
        return android.util.Patterns.EMAIL_ADDRESS.matcher(target).matches();
        }
    } 

    public static final boolean isValidPhoneNumber(CharSequence target) {
        if (target.length()!=10) {
            return false;
        } else {
            return android.util.Patterns.PHONE.matcher(target).matches();
        }
    }

}

Supplemental answer

I was originally having trouble getting a reference to the ViewPager from other class methods because the addOnTabSelectedListener made an anonymous inner class, which in turn required the ViewPager variable to be declared final. The solution was to use a class member variable and not use the anonymous inner class.

public class MainActivity extends AppCompatActivity {

    TabLayout tabLayout;
    ViewPager viewPager;

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        Toolbar toolbar = (Toolbar) findViewById(R.id.toolbar);
        setSupportActionBar(toolbar);

        tabLayout = (TabLayout) findViewById(R.id.tab_layout);
        tabLayout.addTab(tabLayout.newTab().setText("Tab 1"));
        tabLayout.addTab(tabLayout.newTab().setText("Tab 2"));
        tabLayout.addTab(tabLayout.newTab().setText("Tab 3"));
        tabLayout.setTabGravity(TabLayout.GRAVITY_FILL);

        viewPager = (ViewPager) findViewById(R.id.pager);
        final PagerAdapter adapter = new PagerAdapter(getSupportFragmentManager(), tabLayout.getTabCount());
        viewPager.setAdapter(adapter);
        viewPager.addOnPageChangeListener(new TabLayout.TabLayoutOnPageChangeListener(tabLayout));

        // don't use an anonymous inner class here
        tabLayout.addOnTabSelectedListener(tabListener);

    }

    TabLayout.OnTabSelectedListener tabListener = new TabLayout.OnTabSelectedListener() {

        @Override
        public void onTabSelected(TabLayout.Tab tab) {
            viewPager.setCurrentItem(tab.getPosition());
        }

        @Override
        public void onTabUnselected(TabLayout.Tab tab) {

        }

        @Override
        public void onTabReselected(TabLayout.Tab tab) {

        }
    };

    // The view pager can now be accessed here, too.
    public void someMethod() {
        viewPager.setCurrentItem(0);
    }

}

Computed could be consider has a function. So for an exemple on valdiation you could clearly do something like :

    methods: {
        validation(attr){
            switch(attr) {
                case 'email':
                    const re = /^(([^<>()\[\]\.,;:\s@\"]+(\.[^<>()\[\]\.,;:\s@\"]+)*)|(\".+\"))@(([^<>()[\]\.,;:\s@\"]+\.)+[^<>()[\]\.,;:\s@\"]{2,})$/i;
                    return re.test(this.form.email);
                case 'password':
                    return this.form.password.length > 4
            }
        },
        ...
    }

Which you'll be using like :

  <b-form-input
            id="email"
            v-model="form.email"
            type="email"
            :state="validation('email')"
            required
            placeholder="Enter email"
    ></b-form-input>

Just keep in mind that you will still miss the caching specific to computed.

foreach (var p in model.GetType().GetProperties())
{
   var valueOfDisplay = 
       p.GetCustomAttributesData()
        .Any(a => a.AttributeType.Name == "DisplayNameAttribute") ? 
            p.GetCustomAttribute<DisplayNameAttribute>().DisplayName : 
            p.Name;
}

In this example I used DisplayName instead of Author because it has a field named 'DisplayName' to be shown with a value.

I've been trying to achieve something really simple and failed miserably, probably I'm stupid.

Anyway, if you have a script/Dockerfile which download a python package zip file (e.g. from GitHub) and you then want to install it you can use the file:/// prefix to install it as shown in the following example:

$ wget https://example.com/mypackage.zip
$ echo "${MYPACKAGE_MD5}  mypackage.zip" | md5sum --check -
$ pip install file:///.mypackage.zip

NOTE: I know you could install the package straight away using pip install https://example.com/mypackage.zip but in my case I wanted to verify the checksum (never paranoid enough) and I failed miserably when trying to use the various options that pip provides/the #md5 fragment.

It's been surprisingly frustrating to do something so simple directly with pip. I just wanted to pass a checksum and have pip verify that the zip was matching before installing it.

I was probably doing something very stupid but in the end I gave up and opted for this. I hope it helps others trying to do something similar.

Recently i got this problem immediately after installing postgres. If it comes immediately after installation, you might be missing the default user, postgres. In that case, you can create default user postgres using below command.

createuser -s -U $USER

Ex: createuser -s -U $USER
enter your required role name: postgres
enter password for your the user: 

It will prompt you to enter required database role name and password Once you complete the process, you can login to the postgres console using below command

psql -U 'your_database_name'

Ex: psql -U postgres
Here, You need to enter the password if you have given any, while creating the user.

Hope it helps :)

You declared them, but not initialized.

int a; // declaration, unknown value
a = 0; // initialization
int a = 0; // declaration with initialization

It took me a little while but finally figured out. Custom xpath that contains some text below worked perfectly for me.

//a[contains(text(),'JB-')]

I got this work good for me.

<div style="border: 3px solid rgb(201, 0, 1); overflow: hidden; margin: 15px auto; max-width: 736px;">
<iframe scrolling="no" src="http://www.w3schools.com/css/default.asp" style="border: 0px none; margin-left: -185px; height: 859px; margin-top: -533px; width: 926px;">
</iframe>
</div>

Is this working for you or not let us know.

Source: http://www.dimpost.com/2012/12/iframe-how-to-display-specific-part-of.html

The other day I'd been solving the similar issue and found convenient to convert hex color string to int array [alpha, r, g, b]:

 /**
 * Hex color string to int[] array converter
 *
 * @param hexARGB should be color hex string: #AARRGGBB or #RRGGBB
 * @return int[] array: [alpha, r, g, b]
 * @throws IllegalArgumentException
 */

public static int[] hexStringToARGB(String hexARGB) throws IllegalArgumentException {

    if (!hexARGB.startsWith("#") || !(hexARGB.length() == 7 || hexARGB.length() == 9)) {

        throw new IllegalArgumentException("Hex color string is incorrect!");
    }

    int[] intARGB = new int[4];

    if (hexARGB.length() == 9) {
        intARGB[0] = Integer.valueOf(hexARGB.substring(1, 3), 16); // alpha
        intARGB[1] = Integer.valueOf(hexARGB.substring(3, 5), 16); // red
        intARGB[2] = Integer.valueOf(hexARGB.substring(5, 7), 16); // green
        intARGB[3] = Integer.valueOf(hexARGB.substring(7), 16); // blue
    } else hexStringToARGB("#FF" + hexARGB.substring(1));

    return intARGB;
}

in general put a __iter__ method in your class and iterate through the object attributes or put this mixin class in your class.

class IterMixin(object):
    def __iter__(self):
        for attr, value in self.__dict__.iteritems():
            yield attr, value

Your class:

>>> class YourClass(IterMixin): pass
...
>>> yc = YourClass()
>>> yc.one = range(15)
>>> yc.two = 'test'
>>> dict(yc)
{'one': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14], 'two': 'test'}

Move the config files from src/main/java to src/main/resources.

Use:

<?php
    header('Location: redirectpage.php');
    header('Location: redirectpage.php');
    exit();
    echo "<script>location.href='redirectpage.php';</script>";
?>

This is a regular and normal PHP redirect, but you can make a redirecting page with a few seconds wait by the below code:

<?php
    header('refresh:5;url=redirectpage.php '); // Note: here 5 means 5 seconds wait for redirect.
?>

This is a combined answer I made up using the CDR LDN answer above and the answer I found here.

The following example starts an Arch Linux container from an image, and then installs git on that container using the pacman tool:

sudo docker run -it -d archlinux /bin/bash
sudo docker ps -l
sudo docker exec -it [container_ID] script /dev/null -c "pacman -S git --noconfirm"

That is all.

Is it proper to "reach into" an object and use its dict property?

In general, I would say "no". However Namespace has struck me as over-engineered, possibly from when classes couldn't inherit from built-in types.

On the other hand, Namespace does present a task-oriented approach to argparse, and I can't think of a situation that would call for grabbing the __dict__, but the limits of my imagination are not the same as yours.

You can use the function difftime. It returns the difference between two given time_t values, the output value is double (see difftime documentation).

time_t actual_time;
double actual_time_sec;
actual_time = time(0);
actual_time_sec = difftime(actual_time,0); 
printf("%g",actual_time_sec);

class LinksParser(HTMLParser.HTMLParser):
  def __init__(self):
    HTMLParser.HTMLParser.__init__(self)
    self.recording = 0
    self.data = []

  def handle_starttag(self, tag, attributes):
    if tag != 'div':
      return
    if self.recording:
      self.recording += 1
      return
    for name, value in attributes:
      if name == 'id' and value == 'remository':
        break
    else:
      return
    self.recording = 1

  def handle_endtag(self, tag):
    if tag == 'div' and self.recording:
      self.recording -= 1

  def handle_data(self, data):
    if self.recording:
      self.data.append(data)

self.recording counts the number of nested div tags starting from a "triggering" one. When we're in the sub-tree rooted in a triggering tag, we accumulate the data in self.data.

The data at the end of the parse are left in self.data (a list of strings, possibly empty if no triggering tag was met). Your code from outside the class can access the list directly from the instance at the end of the parse, or you can add appropriate accessor methods for the purpose, depending on what exactly is your goal.

The class could be easily made a bit more general by using, in lieu of the constant literal strings seen in the code above, 'div', 'id', and 'remository', instance attributes self.tag, self.attname and self.attvalue, set by __init__ from arguments passed to it -- I avoided that cheap generalization step in the code above to avoid obscuring the core points (keep track of a count of nested tags and accumulate data into a list when the recording state is active).

A super short version, here, without position:absolute in vanilla JavaScript. The main idea is to move the canvas' context to the right coordinates and draw a line. Uncomment click handler and comment mousedown & mousemove handlers below to get a feel for how it is working.

<!DOCTYPE html>
<html>
<body>

<p style="margin: 50px">Just some padding in y direction</p>

<canvas id="myCanvas" width="300" height="300" style="background: #000; margin-left: 100px;">Your browser does not support the HTML5 canvas tag.</canvas>

<script>
    const c = document.getElementById("myCanvas");
    // c.addEventListener("click", penTool); // fires after mouse left btn is released
    c.addEventListener("mousedown", setLastCoords); // fires before mouse left btn is released
    c.addEventListener("mousemove", freeForm);


    const ctx = c.getContext("2d");

    function setLastCoords(e) {
        const {x, y} = c.getBoundingClientRect();
        lastX = e.clientX - x;
        lastY = e.clientY - y;
    }

    function freeForm(e) {
        if (e.buttons !== 1) return; // left button is not pushed yet
        penTool(e);
    }

    function penTool(e) {
        const {x, y} = c.getBoundingClientRect();
        const newX = e.clientX - x;
        const newY = e.clientY - y;

        ctx.beginPath();
        ctx.lineWidth = 5;
        ctx.moveTo(lastX, lastY);
        ctx.lineTo(newX, newY);
        ctx.strokeStyle = 'white';
        ctx.stroke();
        ctx.closePath();

        lastX = newX;
        lastY = newY;
    }

    let lastX = 0;
    let lastY = 0;  
</script>

</body>
</html>

db.collection_name.find({"filed_name":{$exists:true}});

fetch documents that contain this filed_name even it is null.

Warning

db.collection_name.find({"filed_name":{$ne:null}});

fetch documents that its field_name has a value $ne to null but this value could be an empty string also.

My proposition:

db.collection_name.find({ "field_name":{$ne:null},$where:"this.field_name.length >0"})

Simply do:

mkdir /path/to/your/potentially/existing/folder

mkdir will throw an error if the folder already exists. To ignore the errors write:

mkdir -p /path/to/your/potentially/existing/folder

No need to do any checking or anything like that.

For reference:

-p, --parents no error if existing, make parent directories as needed http://man7.org/linux/man-pages/man1/mkdir.1.html

We had this case where an .html file was seen as binary whenever we tried to make changes in it. Very uncool to not see diffs. To be honest, I didn't checked all the solutions here but what worked for us was the following:

1. Removed the file (actually moved it to my Desktop) and commited the git deletion. Git says Deleted file with mode 100644 (Regular) Binary file differs
2. Re-added the file (actually moved it from my Desktop back into the project). Git says New file with mode 100644 (Regular) 1 chunk, 135 insertions, 0 deletions The file is now added as a regular text file

From now on, any changes I made in the file is seen as a regular text diff. You could also squash these commits (1, 2, and 3 being the actual change you make) but I prefer to be able to see in the future what I did. Squashing 1 & 2 will show a binary change.

Here's the fixes to get it to run in Windows without rebuilding everything - such as if you do not have a recent version of MS-VS. (You will need a Win32 C++ compiler, but you can install MS VS Community Edition free.)

I've tried this with Spark 1.2.2 and mahout 0.10.2 as well as with the latest versions in November 2015. There are a number of problems including the fact that the Scala code tries to run a bash script (mahout/bin/mahout) which does not work of course, the sbin scripts have not been ported to windows, and the winutils are missing if hadoop is not installed.

(1) Install scala, then unzip spark/hadoop/mahout into the root of C: under their respective product names.

(2) Rename \mahout\bin\mahout to mahout.sh.was (we will not need it)

(3) Compile the following Win32 C++ program and copy the executable to a file named C:\mahout\bin\mahout (that's right - no .exe suffix, like a Linux executable)

#include "stdafx.h"
#define BUFSIZE 4096
#define VARNAME TEXT("MAHOUT_CP")
int _tmain(int argc, _TCHAR* argv[]) {
    DWORD dwLength;     LPTSTR pszBuffer;
    pszBuffer = (LPTSTR)malloc(BUFSIZE*sizeof(TCHAR));
    dwLength = GetEnvironmentVariable(VARNAME, pszBuffer, BUFSIZE);
    if (dwLength > 0) { _tprintf(TEXT("%s\n"), pszBuffer); return 0; }
    return 1;
}

(4) Create the script \mahout\bin\mahout.bat and paste in the content below, although the exact names of the jars in the _CP class paths will depend on the versions of spark and mahout. Update any paths per your installation. Use 8.3 path names without spaces in them. Note that you cannot use wildcards/asterisks in the classpaths here.

set SCALA_HOME=C:\Progra~2\scala
set SPARK_HOME=C:\spark
set HADOOP_HOME=C:\hadoop
set MAHOUT_HOME=C:\mahout
set SPARK_SCALA_VERSION=2.10
set MASTER=local[2]
set MAHOUT_LOCAL=true
set path=%SCALA_HOME%\bin;%SPARK_HOME%\bin;%PATH%
cd /D %SPARK_HOME%
set SPARK_CP=%SPARK_HOME%\conf\;%SPARK_HOME%\lib\xxx.jar;...other jars...
set MAHOUT_CP=%MAHOUT_HOME%\lib\xxx.jar;...other jars...;%MAHOUT_HOME%\xxx.jar;...other jars...;%SPARK_CP%;%MAHOUT_HOME%\lib\spark\xxx.jar;%MAHOUT_HOME%\lib\hadoop\xxx.jar;%MAHOUT_HOME%\src\conf;%JAVA_HOME%\lib\tools.jar
start "master0" "%JAVA_HOME%\bin\java" -cp "%SPARK_CP%" -Xms1g -Xmx1g org.apache.spark.deploy.master.Master --ip localhost --port 7077 --webui-port 8082 >>out-master0.log 2>>out-master0.err
start "worker1" "%JAVA_HOME%\bin\java" -cp "%SPARK_CP%" -Xms1g -Xmx1g org.apache.spark.deploy.worker.Worker spark://localhost:7077 --webui-port 8083 >>out-worker1.log 2>>out-worker1.err
...you may add more workers here...
cd /D %MAHOUT_HOME%
"%JAVA_HOME%\bin\java" -Xmx4g -classpath "%MAHOUT_CP%" "org.apache.mahout.sparkbindings.shell.Main"

The name of the variable MAHOUT_CP should not be changed, as it is referenced in the C++ code.

Of course you can comment-out the code that launches the Spark master and worker because Mahout will run Spark as-needed; I just put it in the batch job to show you how to launch it if you wanted to use Spark without Mahout.

(5) The following tutorial is a good place to begin:

https://mahout.apache.org/users/sparkbindings/play-with-shell.html

You can bring up the Mahout Spark instance at:

"C:\Program Files (x86)\Google\Chrome\Application\chrome" --disable-web-security http://localhost:4040

This worked for me.

def parse_data():
    if request.method == "POST":
        data = request.get_json()
        print(data['answers'])
        return render_template('output.html', data=data)

$.ajax({
      type: 'POST',
      url: "/parse_data",
      data: JSON.stringify({values}),
      contentType: "application/json;charset=utf-8",
      dataType: "json",
      success: function(data){
        // do something with the received data
      }
    });

If I get you right, you need ..\..\src

It seems the problem is you send the form request to welcome/do_upload, and call the Welcome::do_upload() method in another one by $this->do_upload().

Hence when you call the $this->do_upload(); within your second method, the $_FILES array would be empty.

And that's why var_dump($data['upload_data']); returns NULL.

If you want to upload the file from welcome/second_method, send the form request to the welcome/second_method where you call $this->do_upload();.

Then change the form helper function (within the View) as follows¹:

// Change the 'second_method' to your method name
echo form_open_multipart('welcome/second_method');

File Uploading with CodeIgniter

CodeIgniter has documented the Uploading process very well, by using the File Uploading library.

You could take a look at the sample code in the user guide; And also, in order to get a better understanding of the uploading configs, Check the Config items Explanation section at the end of the manual page.

Also there are couple of articles/samples about the file uploading in CodeIgniter, you might want to consider:

• http://code.tutsplus.com/tutorials/how-to-upload-files-with-codeigniter-and-ajax--net-21684
• http://runnable.com/UhIc93EfFJEMAADX/how-to-upload-file-in-codeigniter
• http://jamshidhashimi.com/image-upload-with-codeigniter-2/
• http://code.tutsplus.com/tutorials/how-to-upload-files-with-codeigniter-and-ajax--net-21684
• http://hashem.ir/CodeIgniter/libraries/file_uploading.html (CodeIgniter 3.0-dev User Guide)

Just as a side-note: Make sure that you've loaded the url and form helper functions before using the CodeIgniter sample code:

// Load the helper files within the Controller
$this->load->helper('form');
$this->load->helper('url');

_{1. The form must be "multipart" type for file uploading. Hence you should use form_open_multipart() helper function which returns:
<form method="post" action="controller/method" enctype="multipart/form-data" />}

In our case it was due to the Recovery Model on the primary database having been changed after we did the backup in preparation for setting up log shipping.

Ensuring the Recovery Model was set to Full Recovery before doing the backup and setting up log shipping resolved it for us.

I don't know about JSON.NET, but it works fine with JavaScriptSerializer from System.Web.Extensions.dll (.NET 3.5 SP1):

using System.Collections.Generic;
using System.Web.Script.Serialization;
public class NameTypePair
{
    public string OBJECT_NAME { get; set; }
    public string OBJECT_TYPE { get; set; }
}
public enum PositionType { none, point }
public class Ref
{
    public int id { get; set; }
}
public class SubObject
{
    public NameTypePair attributes { get; set; }
    public Position position { get; set; }
}
public class Position
{
    public int x { get; set; }
    public int y { get; set; }
}
public class Foo
{
    public Foo() { objects = new List<SubObject>(); }
    public string displayFieldName { get; set; }
    public NameTypePair fieldAliases { get; set; }
    public PositionType positionType { get; set; }
    public Ref reference { get; set; }
    public List<SubObject> objects { get; set; }
}
static class Program
{

    const string json = @"{
  ""displayFieldName"" : ""OBJECT_NAME"", 
  ""fieldAliases"" : {
    ""OBJECT_NAME"" : ""OBJECT_NAME"", 
    ""OBJECT_TYPE"" : ""OBJECT_TYPE""
  }, 
  ""positionType"" : ""point"", 
  ""reference"" : {
    ""id"" : 1111
  }, 
  ""objects"" : [
    {
      ""attributes"" : {
        ""OBJECT_NAME"" : ""test name"", 
        ""OBJECT_TYPE"" : ""test type""
      }, 
      ""position"" : 
      {
        ""x"" : 5, 
        ""y"" : 7
      }
    }
  ]
}";


    static void Main()
    {
        JavaScriptSerializer ser = new JavaScriptSerializer();
        Foo foo = ser.Deserialize<Foo>(json);
    }


}

Edit:

Json.NET works using the same JSON and classes.

Foo foo = JsonConvert.DeserializeObject<Foo>(json);

Link: Serializing and Deserializing JSON with Json.NET

Read this https://docs.djangoproject.com/en/dev/howto/static-files/:

For local development, if you are using runserver or adding staticfiles_urlpatterns to your URLconf, you’re done with the setup – your static files will automatically be served at the default (for newly created projects) STATIC_URL of /static/.

And try:

~/tmp$ django-admin.py startproject myprj
~/tmp$ cd myprj/
~/tmp/myprj$ chmod a+x manage.py
~/tmp/myprj$ ./manage.py startapp myapp

Then add 'myapp' to INSTALLED_APPS (myprj/settings.py).

~/tmp/myprj$ cd myapp/
~/tmp/myprj/myapp$ mkdir static
~/tmp/myprj/myapp$ echo 'alert("hello!");' > static/hello.js
~/tmp/myprj/myapp$ mkdir templates
~/tmp/myprj/myapp$ echo '<script src="{{ STATIC_URL }}hello.js"></script>' > templates/hello.html

Edit myprj/urls.py:

from django.conf.urls import patterns, include, url
from django.views.generic import TemplateView

class HelloView(TemplateView):
    template_name = "hello.html"

urlpatterns = patterns('',
    url(r'^$', HelloView.as_view(), name='hello'),
)

And run it:

~/tmp/myprj/myapp$ cd ..
~/tmp/myprj$ ./manage.py runserver

It works!

This solution seems easy to follow:

public static bool isValidURL(string url) {
    WebRequest webRequest = WebRequest.Create(url);
    WebResponse webResponse;
    try
    {
        webResponse = webRequest.GetResponse();
    }
    catch //If exception thrown then couldn't get response from address
    {
        return false ;
    }
    return true ;
}

Java 8 and later

@Warren M. Nocos. If you are trying to use Java 8's new Date and Time API, you can use java.time.YearMonth class. See Oracle Tutorial.

// Get the number of days in that month
YearMonth yearMonthObject = YearMonth.of(1999, 2);
int daysInMonth = yearMonthObject.lengthOfMonth(); //28  

Test: try a month in a leap year:

yearMonthObject = YearMonth.of(2000, 2);
daysInMonth = yearMonthObject.lengthOfMonth(); //29 

Java 7 and earlier

Create a calendar, set year and month and use getActualMaximum

int iYear = 1999;
int iMonth = Calendar.FEBRUARY; // 1 (months begin with 0)
int iDay = 1;

// Create a calendar object and set year and month
Calendar mycal = new GregorianCalendar(iYear, iMonth, iDay);

// Get the number of days in that month
int daysInMonth = mycal.getActualMaximum(Calendar.DAY_OF_MONTH); // 28

Test: try a month in a leap year:

mycal = new GregorianCalendar(2000, Calendar.FEBRUARY, 1);
daysInMonth= mycal.getActualMaximum(Calendar.DAY_OF_MONTH);      // 29

Warning: this way is not a safe way, but is very easy to use. Use it wisely.

Use the eval function.

print eval('2 + 4')

Output:

6

You can even use variables or regular python code.

a = 5
print eval('a + 4')

Output:

9

You also can get return values:

d = eval('4 + 5')
print d

Output:

9

Or call functions:

def add(a, b):
    return a + b

def subtract(a, b):
    return a - b

a = 20
b = 10    
print eval('add(a, b)')
print eval('subtract(a, b)')

Output:

30
10

In case you want to write a parser, maybe instead you can built a python code generator if that is easier and use eval to run the code. With eval you can execute any Python evalution.

Why eval is unsafe?

Since you can put literally anything in the eval, e.g. if the input argument is:

os.system(‘rm -rf /’)

It will remove all files on your system (at least on Linux/Unix). So only use eval when you trust the input.

I had a slightly augmented issue. I needed to rename a machine and then RE-JOIN a domain it was already a member of and could not find where to do that but its seems very close to what is here. The individual solutions above don't do it but with some togetherness... If you try to rename, you get denied. If you rename and then rejoin, you get an account already exists error. You need to bail from the domain by joining a workgroup and then you can run the rename and join in one command.

$Chops = Get-Credential 
# Or bring in a stored credential
$NewComputerName = "WhoImGonnaBe" 
# or value from CSV
$MyDomainName = "MyDomain"
Add-Computer -WorkgroupName NotADomain -force -DomainCredential $Chops
Add-Computer -DomainName $MyDomainName -Computername $ENV:Computername -NewName $NewComputerName -DomainCredential $Chops -Force -Restart
#  If running locally you really only need the -NewName and can omit the -Computername

Below code will give the output for number of days, by taking out the difference between two dates..

$str = "Jul 02 2013";
$str = strtotime(date("M d Y ")) - (strtotime($str));
echo floor($str/3600/24);

Yes you can.... you can place something on top of the link element.

<!DOCTYPE html>
<html>
<head>
    <title>Yes you CAN</title>
    <style type="text/css">
        ul{
            width: 500px;
            border: 5px solid black; 
        }
        .product-type-simple {
            position: relative;
            height: 150px;
            width: 150px;
        }
        .product-type-simple:before{
            position: absolute;
            height: 100% ;
            width: 100% ;
            content: '';
            background: green;//for debugging purposes , remove this if you want to see whats behind
            z-index: 999999999999;
        }
    </style>
</head>
<body>
<ul>
    <li class='product-type-simple'>
        <a href="/link1">
            <img src="http://placehold.it/150x150">
        </a>
    </li>
    <li class='product-type-simple'>
        <a href="/link2">
            <img src="http://placehold.it/150x150">
        </a>
    </li>
</ul>
</body>
</html>

the magic sauce happens at product-type-simple:before class Whats happening here is that for each element that has class of product-type-simple you create something that has the width and height equal to that of the product-type-simple , then you increase its z-index to make sure it will place it self on top of the content of product-type-simple. You can toggle the background color if you want to see whats going on.

here is an example of the code https://jsfiddle.net/92qky63j/

<script type="text/javascript">
        function returnwasset(){
            alert('return sent');
            $.ajax({
                type: "POST",
                url: "process.php",
                data: somedata;
                dataType:'text'; //or HTML, JSON, etc.
                success: function(response){
                    alert(response);
                    //echo what the server sent back...
                }
            });
        }
    </script>

Maybe something like this:

connected = False

while not connected:
    try:
        try_connect()
        connected = True
    except ...:
        pass

You may use the typescript getter method for this scenario. Like this

public get height() {
  return window.innerHeight;
}

public get width() {
  return window.innerWidth;
}

And use that in template like this:

<section [ngClass]="{ 'desktop-view': width >= 768, 'mobile-view': width < 768 
}"></section>

Print the value

console.log(this.height, this.width);

You won't need any event handler to check for resizing of window, this method will check for size every time automatically.

Autoresize simple Popup Bubble

index.html

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
  <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
  <link href="bubble.css" type="text/css" rel="stylesheet" />
  <script language="javascript" type="text/javascript" src="jquery.js"></script>
  <script language="javascript" type="text/javascript" src="bubble.js"></script>
</head>
<body>
  <br/><br/>
  <div class="bubbleInfo">
      <div class="bubble" title="Text 1">Set cursor</div>
  </div>
  <br/><br/><br/><br/>
  <div class="bubbleInfo">
      <div class="bubble" title="Text 2">Set cursor</div>
  </div>
</body>
</html>

bubble.js

$(function () {     
  var i = 0;
  var z=1;
  do{
    title = $('.bubble:eq('+i+')').attr('title');
    if(!title){
      z=0;
    } else {
       $('.bubble:eq('+i+')').after('<table style="opacity: 0; top: -50px; left: -33px; display: none;" id="dpop" class="popup"><tbody><tr><td id="topleft" class="corner"></td><td class="top"></td><td id="topright" class="corner"></td></tr><tr><td class="left"></td><td>'+title+'</td><td class="right"></td></tr><tr><td class="corner" id="bottomleft"></td><td class="bottom"><img src="bubble/bubble-tail.png" height="25px" width="30px" /></td><td id="bottomright" class="corner"></td></tr></tbody></table>');
       $('.bubble:eq('+i+')').removeAttr('title');
    }
    i++;
  }while(z>0)

  $('.bubbleInfo').each(function () {
    var distance = 10;
    var time = 250;
    var hideDelay = 500;        
    var hideDelayTimer = null;       
    var beingShown = false;
    var shown = false;
    var trigger = $('.bubble', this);
    var info = $('.popup', this).css('opacity', 0);        

    $([trigger.get(0), info.get(0)]).mouseover(function () {
      if (hideDelayTimer) clearTimeout(hideDelayTimer);
      if (beingShown || shown) {
        // don't trigger the animation again
        return;
      } else {
        // reset position of info box
        beingShown = true;

        info.css({
        top: -40,
        left: 10,
        display: 'block'
        }).animate({
        top: '-=' + distance + 'px',
        opacity: 1
        }, time, 'swing', function() {
          beingShown = false;
          shown = true;
        });
      }          
      return false;
    }).mouseout(function () {
      if (hideDelayTimer) clearTimeout(hideDelayTimer);
      hideDelayTimer = setTimeout(function () {
        hideDelayTimer = null;
        info.animate({
          top: '-=' + distance + 'px',
          opacity: 0
        }, time, 'swing', function () {
          shown = false;
          info.css('display', 'none');
        });
      }, hideDelay);
      return false;
    });
  }); 
});

bubble.css

/* Booble */
.bubbleInfo {
    position: relative;
    width: 500px;
}
.bubble {       
}
.popup {
    position: absolute;
    display: none;
    z-index: 50;
    border-collapse: collapse;
    font-size: .8em;
}
.popup td.corner {
    height: 13px;
    width: 15px;
}
.popup td#topleft { 
    background-image: url(bubble/bubble-1.png); 
} 
.popup td.top { 
    background-image: url(bubble/bubble-2.png); 
}
.popup td#topright { 
    background-image: url(bubble/bubble-3.png); 
}
.popup td.left { 
    background-image: url(bubble/bubble-4.png); 
}
.popup td.right { 
    background-image: url(bubble/bubble-5.png); 
}
.popup td#bottomleft { 
    background-image: url(bubble/bubble-6.png); 
}
.popup td.bottom { 
    background-image: url(bubble/bubble-7.png); 
    text-align: center;
}
.popup td.bottom img { 
    display: block; 
    margin: 0 auto; 
}
.popup td#bottomright { 
    background-image: url(bubble/bubble-8.png); 
}

if you are on Windows

1. Start the Oracle service if it is not started (most probably it starts automatically when Windows starts)
2. Start CMD.exe
3. in the cmd (black window) type: sqlplus / as sysdba

Now you are logged with SYS user and you can do anything you want (query DBA_USERS to find out your username, or change any user password). You can not see the old password, you can only change it.

Apache HttpComponents also have an async http client now too:

/**
    <dependency>
      <groupId>org.apache.httpcomponents</groupId>
      <artifactId>httpasyncclient</artifactId>
      <version>4.0-beta4</version>
    </dependency>
**/

import java.io.IOException;
import java.nio.CharBuffer;
import java.util.concurrent.Future;

import org.apache.http.HttpResponse;
import org.apache.http.impl.nio.client.CloseableHttpAsyncClient;
import org.apache.http.impl.nio.client.HttpAsyncClients;
import org.apache.http.nio.IOControl;
import org.apache.http.nio.client.methods.AsyncCharConsumer;
import org.apache.http.nio.client.methods.HttpAsyncMethods;
import org.apache.http.protocol.HttpContext;

public class HttpTest {

  public static void main(final String[] args) throws Exception {

    final CloseableHttpAsyncClient httpclient = HttpAsyncClients
        .createDefault();
    httpclient.start();
    try {
      final Future<Boolean> future = httpclient.execute(
          HttpAsyncMethods.createGet("http://www.google.com/"),
          new MyResponseConsumer(), null);
      final Boolean result = future.get();
      if (result != null && result.booleanValue()) {
        System.out.println("Request successfully executed");
      } else {
        System.out.println("Request failed");
      }
      System.out.println("Shutting down");
    } finally {
      httpclient.close();
    }
    System.out.println("Done");
  }

  static class MyResponseConsumer extends AsyncCharConsumer<Boolean> {

    @Override
    protected void onResponseReceived(final HttpResponse response) {
    }

    @Override
    protected void onCharReceived(final CharBuffer buf, final IOControl ioctrl)
        throws IOException {
      while (buf.hasRemaining()) {
        System.out.print(buf.get());
      }
    }

    @Override
    protected void releaseResources() {
    }

    @Override
    protected Boolean buildResult(final HttpContext context) {
      return Boolean.TRUE;
    }
  }
}

You can do this using jQuery:

This method gets a list of its children then counts the length of that list, as simple as that.

$("ul").find("*").length;

The find() method traverses DOM downwards along descendants, all the way down to the last descendant.

Note: children() method traverses a single level down the DOM tree.