This need is exactly why createInsecureRfcommSocketToServiceRecord()
was added to BluetoothDevice
starting in Android 2.3.3 (API Level 10) (SDK Docs)...before that there was no SDK support for this. It was designed to allow Android to connect to devices without user interfaces for entering a PIN code (like an embedded device), but it just as usable for setting up a connection between two devices without user PIN entry.
The corollary method listenUsingInsecureRfcommWithServiceRecord()
in BluetoothAdapter
is used to accept these types of connections. It's not a security breach because the methods must be used as a pair. You cannot use this to simply attempt to pair with any old Bluetooth device.
You can also do short range communications over NFC, but that hardware is less prominent on Android devices. Definitely pick one, and don't try to create a solution that uses both.
Hope that Helps!
P.S. There are also ways to do this on many devices prior to 2.3 using reflection, because the code did exist...but I wouldn't necessarily recommend this for mass-distributed production applications. See this StackOverflow.
The ability to read an NFC tag has been added to iOS 11 which only support iPhone 7 and 7 plus
As a test drive I made this repo
First: We need to initiate NFCNDEFReaderSession class
var session: NFCNDEFReaderSession?
session = NFCNDEFReaderSession(delegate: self, queue: nil, invalidateAfterFirstRead: false)
Then we need to start the session by:
session?.begin()
and when done:
session?.invalidate()
The delegate (which self should implement) has basically two functions:
func readerSession(_ session: NFCNDEFReaderSession, didDetectNDEFs messages: [NFCNDEFMessage])
func readerSession(_ session: NFCNDEFReaderSession, didInvalidateWithError error: Error)
here is my reference Apple docs
I recently worked on a project to read the RFID tags. The project used the Devices from manufacturers like Zebra (we were using RFD8500 ) & TSL.
More devices are from Motorola & other vendors as well!
We have to use the native SDK api's provided by the manufacturer, how it works is by pairing the device by the Bluetooth of the phones and so the data transfer between both devices take place! The programming is based on subscribe pattern where the scan should be read by the device trigger(hardware trigger) or soft trigger (from the application).
The Tag read gives us the tagId & the RSSI which is the distance factor from the RFID tags!
This is the sample app:
We get all the device paired to our Android/iOS phones :
In the google io session about NFC, qa section. There was such a question:
card emulation? No API support for card emulation No consistent user experience when doing card emulation and no compelling story
What you are trying to do is simply not possible from an app (at least not on a non-rooted/non-modified device). The message "NFC tag type not supported" is displayed by the Android system (or more specifically the NFC system service) before and instead of dispatching the tag to your app. This means that the NFC system service filters MIFARE Classic tags and never notifies any app about them. Consequently, your app can't detect MIFARE Classic tags or circumvent that popup message.
On a rooted device, you may be able to bypass the message using either
the CSC (Consumer Software Customization) feature configuration files on the system partition (see /system/csc/. The NFC system service disables the popup and dispatches MIFARE Classic tags to apps if the CSC feature <CscFeature_NFC_EnableSecurityPromptPopup>
is set to any value but "mifareclassic" or "all". For instance, you could use:
<CscFeature_NFC_EnableSecurityPromptPopup>NONE</CscFeature_NFC_EnableSecurityPromptPopup>
You could add this entry to, for instance, the file "/system/csc/others.xml" (within the section <FeatureSet> ... </FeatureSet>
that already exists in that file).
Since, you asked for the Galaxy S6 (the question that you linked) as well: I have tested this method on the S4 when it came out. I have not verified if this still works in the latest firmware or on other devices (e.g. the S6).
This is pure guessing, but according to this (link no longer available), it seems that some apps (e.g. NXP TagInfo) are capable of detecting MIFARE Classic tags on affected Samsung devices since Android 4.4. This might mean that foreground apps are capable of bypassing that popup using the reader-mode API (see NfcAdapter.enableReaderMode
) possibly in combination with NfcAdapter.FLAG_READER_SKIP_NDEF_CHECK
.
MVC 5
C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Stack 5\Packages\ Microsoft.AspNet.Mvc.5.0.0\lib\net45\System.Web.Mvc.dll
MVC 4
C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET MVC 4\Assemblies\System.Web.Mvc.dll
MVC 3
C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET MVC 3\Assemblies\System.Web.Mvc.dll
MVC 2
C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET MVC 2\Assemblies\System.Web.Mvc.dll
Where can I find System.Web.MVC dll in a system where MVC 3 is installed?
The short answer is the iPhone supports H.264 video, High profile and AAC audio, in container formats .mov
, .mp4
, or MPEG Segment .ts
. MPEG Segment files are used for HTTP Live Streaming.
.mp4
container..ts
container files (see App Store Review Guidelines rule 2.5.7).On the iPhone, H.264 is the only game in town. [1]
There are several different feature tiers or "profiles" available in H.264. All modern iPhones (3GS and above) support the High profile. These profiles are basically three different levels of algorithm "tricks" used to compress the video. More tricks give better compression, but require more CPU or dedicated hardware to decode. This is a table that lists the differences between the different profiles.
[1] Interestingly, Apple's own Facetime uses the newer H.265 (HEVC) video codec. However right now (August 2017) there is no Apple-provided library that gives access to a HEVC codec to developers. This is expected to change at some point.
In talking about what video format the iPhone supports, a distinction should be made between what the hardware can support, and what the (much lower) limits are for playback when streaming over a network.
The only data given about hardware video support by Apple about the current generation of iPhones (SE, 6S, 6S Plus, 7, 7 Plus) is that they support
4K [3840x2160] video recording at 30 fps
1080p [1920x1080] HD video recording at 30 fps or 60 fps.
Obviously the phone can play back what it can record, so we can guess that 3840x2160 at 30 fps and 1920x1080 at 60 fps represent design limits of the phone. In addition, the screen size on the 6S Plus and 7 Plus is 1920x1080. So if you're interested in playback on the phone, it doesn't make sense to send over more pixels then the screen can draw.
However, streaming video is a different matter. Since networks are slow and video is huge, it's typical to use lower resolutions, bitrates, and frame rates than the device's theoretical maximum.
The most detailed document giving recommendations for streaming is TN2224 Best Practices for Creating and Deploying HTTP Live Streaming Media for Apple Devices. Figure 3 in that document gives a table of recommended streaming parameters:
As you can see, Apple recommends the relatively low resolution of 768x432 as the highest recommended resolution for streaming over a cellular network. Of course this is just a recommendation and YMMV.
The question is about video, but that video generally has one or more audio tracks with it. The iPhone supports a few audio formats, but the most modern and by far most widely used is AAC. The iPhone 7 / 7 Plus, 6S Plus / 6S, SE all support AAC bitrates of 8 to 320 Kbps.
The audio and video tracks go inside a container. The purpose of the container is to combine (interleave) the different tracks together, to store metadata, and to support seeking. The iPhone supports
The .mov
and .mp4
file formats are closely related (.mp4
is in fact based on .mov
), however .mp4
is an ISO standard that has much wider support.
As noted above, you have to use MPEG-TS for videos longer than 10 minutes.
Instead of creating a new route for that, you could just redirect to your controller/action and pass the information via querystring. For instance:
protected void Application_Error(object sender, EventArgs e) {
Exception exception = Server.GetLastError();
Response.Clear();
HttpException httpException = exception as HttpException;
if (httpException != null) {
string action;
switch (httpException.GetHttpCode()) {
case 404:
// page not found
action = "HttpError404";
break;
case 500:
// server error
action = "HttpError500";
break;
default:
action = "General";
break;
}
// clear error on server
Server.ClearError();
Response.Redirect(String.Format("~/Error/{0}/?message={1}", action, exception.Message));
}
Then your controller will receive whatever you want:
// GET: /Error/HttpError404
public ActionResult HttpError404(string message) {
return View("SomeView", message);
}
There are some tradeoffs with your approach. Be very very careful with looping in this kind of error handling. Other thing is that since you are going through the asp.net pipeline to handle a 404, you will create a session object for all those hits. This can be an issue (performance) for heavily used systems.
i think android studio has a 64bit kernel version which is giving the problem. https://github.com/swcarpentry/windows-installer/issues/49
As the commenters have stated the best option is to fix the errors, but with limited time or knowledge, that's not always possible. In your php.ini change
error_reporting = E_ALL
to
error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
If you don't have access to the php.ini, you can potentially put this in your .htaccess file:
php_value error_reporting 30711
This is the E_ALL value (32767) and the removing the E_STRICT (2048) and E_NOTICE (8) values.
If you don't have access to the .htaccess file or it's not enabled, you'll probably need to put this at the top of the PHP section of any script that gets loaded from a browser call:
error_reporting(E_ALL & ~E_STRICT & ~E_NOTICE);
One of those should help you be able to use the software. The notices and strict stuff are indicators of problems or potential problems though and you may find some of the code is not working correctly in PHP 5.4.
Be aware that it only updates the first company it found with company id 1. For multiple
(from c in listOfCompany where c.id == 1 select c).First().Name = "Whatever Name";
For Multiple updates
from c in listOfCompany where c.id == 1 select c => {c.Name = "Whatever Name"; return c;}
A pool of threads means that all your threads are running, all the time – in other words, the thread function never returns. To give the threads something meaningful to do, you have to design a system of inter-thread communication, both for the purpose of telling the thread that there's something to do, as well as for communicating the actual work data.
Typically this will involve some kind of concurrent data structure, and each thread would presumably sleep on some kind of condition variable, which would be notified when there's work to do. Upon receiving the notification, one or several of the threads wake up, recover a task from the concurrent data structure, process it, and store the result in an analogous fashion.
The thread would then go on to check whether there's even more work to do, and if not go back to sleep.
The upshot is that you have to design all this yourself, since there isn't a natural notion of "work" that's universally applicable. It's quite a bit of work, and there are some subtle issues you have to get right. (You can program in Go if you like a system which takes care of thread management for you behind the scenes.)
Simply use hr tag in HTML file and add below code in CSS file .
hr {
display: block;
position: relative;
padding: 0;
margin: 8px auto;
height: 0;
width: 100%;
max-height: 0;
font-size: 1px;
line-height: 0;
clear: both;
border: none;
border-top: 1px solid #aaaaaa;
border-bottom: 1px solid #ffffff;
}
it works perfectly .
SELECT DISTINCT groups.id,
(SELECT COUNT(*) FROM group_members
WHERE member_id = groups.id) AS memberCount
FROM groups
Didn't wan to mess with carbon. So here's my solution
$start = new \DateTime('now');
$start->modify('first day of this month');
$end = new \DateTime('now');
$end->modify('last day of this month');
$new_releases = Game::whereBetween('release', array($start, $end))->get();
Do not inject javascript. That is a bad practice.
I would model the DatePicker as an element like textbox / select as shown below.
For the detailed answer - check here- http://www.testautomationguru.com/selenium-webdriver-automating-custom-controls-datepicker/
public class DatePicker {
private static final String dateFormat = "dd MMM yyyy";
@FindBy(css = "a.ui-datepicker-prev")
private WebElement prev;
@FindBy(css = "a.ui-datepicker-next")
private WebElement next;
@FindBy(css = "div.ui-datepicker-title")
private WebElement curDate;
@FindBy(css = "a.ui-state-default")
private List < WebElement > dates;
public void setDate(String date) {
long diff = this.getDateDifferenceInMonths(date);
int day = this.getDay(date);
WebElement arrow = diff >= 0 ? next : prev;
diff = Math.abs(diff);
//click the arrows
for (int i = 0; i < diff; i++)
arrow.click();
//select the date
dates.stream()
.filter(ele - > Integer.parseInt(ele.getText()) == day)
.findFirst()
.ifPresent(ele - > ele.click());
}
private int getDay(String date) {
DateTimeFormatter dtf = DateTimeFormatter.ofPattern(dateFormat);
LocalDate dpToDate = LocalDate.parse(date, dtf);
return dpToDate.getDayOfMonth();
}
private long getDateDifferenceInMonths(String date) {
DateTimeFormatter dtf = DateTimeFormatter.ofPattern(dateFormat);
LocalDate dpCurDate = LocalDate.parse("01 " + this.getCurrentMonthFromDatePicker(), dtf);
LocalDate dpToDate = LocalDate.parse(date, dtf);
return YearMonth.from(dpCurDate).until(dpToDate, ChronoUnit.MONTHS);
}
private String getCurrentMonthFromDatePicker() {
return this.curDate.getText();
}
}
For a 2d numpy
array, simply use imshow()
may help you:
import matplotlib.pyplot as plt
import numpy as np
def heatmap2d(arr: np.ndarray):
plt.imshow(arr, cmap='viridis')
plt.colorbar()
plt.show()
test_array = np.arange(100 * 100).reshape(100, 100)
heatmap2d(test_array)
This code produces a continuous heatmap.
You can choose another built-in colormap
from here.
A solution which worked in my case is:
1. Go to the module having Main class.
2. Right click on pom.xml under this module.
3. Select "Run Maven" -> "UpdateSnapshots"
Matplotlib uses a dictionary from its colors.py module.
To print the names use:
# python2:
import matplotlib
for name, hex in matplotlib.colors.cnames.iteritems():
print(name, hex)
# python3:
import matplotlib
for name, hex in matplotlib.colors.cnames.items():
print(name, hex)
This is the complete dictionary:
cnames = {
'aliceblue': '#F0F8FF',
'antiquewhite': '#FAEBD7',
'aqua': '#00FFFF',
'aquamarine': '#7FFFD4',
'azure': '#F0FFFF',
'beige': '#F5F5DC',
'bisque': '#FFE4C4',
'black': '#000000',
'blanchedalmond': '#FFEBCD',
'blue': '#0000FF',
'blueviolet': '#8A2BE2',
'brown': '#A52A2A',
'burlywood': '#DEB887',
'cadetblue': '#5F9EA0',
'chartreuse': '#7FFF00',
'chocolate': '#D2691E',
'coral': '#FF7F50',
'cornflowerblue': '#6495ED',
'cornsilk': '#FFF8DC',
'crimson': '#DC143C',
'cyan': '#00FFFF',
'darkblue': '#00008B',
'darkcyan': '#008B8B',
'darkgoldenrod': '#B8860B',
'darkgray': '#A9A9A9',
'darkgreen': '#006400',
'darkkhaki': '#BDB76B',
'darkmagenta': '#8B008B',
'darkolivegreen': '#556B2F',
'darkorange': '#FF8C00',
'darkorchid': '#9932CC',
'darkred': '#8B0000',
'darksalmon': '#E9967A',
'darkseagreen': '#8FBC8F',
'darkslateblue': '#483D8B',
'darkslategray': '#2F4F4F',
'darkturquoise': '#00CED1',
'darkviolet': '#9400D3',
'deeppink': '#FF1493',
'deepskyblue': '#00BFFF',
'dimgray': '#696969',
'dodgerblue': '#1E90FF',
'firebrick': '#B22222',
'floralwhite': '#FFFAF0',
'forestgreen': '#228B22',
'fuchsia': '#FF00FF',
'gainsboro': '#DCDCDC',
'ghostwhite': '#F8F8FF',
'gold': '#FFD700',
'goldenrod': '#DAA520',
'gray': '#808080',
'green': '#008000',
'greenyellow': '#ADFF2F',
'honeydew': '#F0FFF0',
'hotpink': '#FF69B4',
'indianred': '#CD5C5C',
'indigo': '#4B0082',
'ivory': '#FFFFF0',
'khaki': '#F0E68C',
'lavender': '#E6E6FA',
'lavenderblush': '#FFF0F5',
'lawngreen': '#7CFC00',
'lemonchiffon': '#FFFACD',
'lightblue': '#ADD8E6',
'lightcoral': '#F08080',
'lightcyan': '#E0FFFF',
'lightgoldenrodyellow': '#FAFAD2',
'lightgreen': '#90EE90',
'lightgray': '#D3D3D3',
'lightpink': '#FFB6C1',
'lightsalmon': '#FFA07A',
'lightseagreen': '#20B2AA',
'lightskyblue': '#87CEFA',
'lightslategray': '#778899',
'lightsteelblue': '#B0C4DE',
'lightyellow': '#FFFFE0',
'lime': '#00FF00',
'limegreen': '#32CD32',
'linen': '#FAF0E6',
'magenta': '#FF00FF',
'maroon': '#800000',
'mediumaquamarine': '#66CDAA',
'mediumblue': '#0000CD',
'mediumorchid': '#BA55D3',
'mediumpurple': '#9370DB',
'mediumseagreen': '#3CB371',
'mediumslateblue': '#7B68EE',
'mediumspringgreen': '#00FA9A',
'mediumturquoise': '#48D1CC',
'mediumvioletred': '#C71585',
'midnightblue': '#191970',
'mintcream': '#F5FFFA',
'mistyrose': '#FFE4E1',
'moccasin': '#FFE4B5',
'navajowhite': '#FFDEAD',
'navy': '#000080',
'oldlace': '#FDF5E6',
'olive': '#808000',
'olivedrab': '#6B8E23',
'orange': '#FFA500',
'orangered': '#FF4500',
'orchid': '#DA70D6',
'palegoldenrod': '#EEE8AA',
'palegreen': '#98FB98',
'paleturquoise': '#AFEEEE',
'palevioletred': '#DB7093',
'papayawhip': '#FFEFD5',
'peachpuff': '#FFDAB9',
'peru': '#CD853F',
'pink': '#FFC0CB',
'plum': '#DDA0DD',
'powderblue': '#B0E0E6',
'purple': '#800080',
'red': '#FF0000',
'rosybrown': '#BC8F8F',
'royalblue': '#4169E1',
'saddlebrown': '#8B4513',
'salmon': '#FA8072',
'sandybrown': '#FAA460',
'seagreen': '#2E8B57',
'seashell': '#FFF5EE',
'sienna': '#A0522D',
'silver': '#C0C0C0',
'skyblue': '#87CEEB',
'slateblue': '#6A5ACD',
'slategray': '#708090',
'snow': '#FFFAFA',
'springgreen': '#00FF7F',
'steelblue': '#4682B4',
'tan': '#D2B48C',
'teal': '#008080',
'thistle': '#D8BFD8',
'tomato': '#FF6347',
'turquoise': '#40E0D0',
'violet': '#EE82EE',
'wheat': '#F5DEB3',
'white': '#FFFFFF',
'whitesmoke': '#F5F5F5',
'yellow': '#FFFF00',
'yellowgreen': '#9ACD32'}
You could plot them like this:
import matplotlib.pyplot as plt
import matplotlib.patches as patches
import matplotlib.colors as colors
import math
fig = plt.figure()
ax = fig.add_subplot(111)
ratio = 1.0 / 3.0
count = math.ceil(math.sqrt(len(colors.cnames)))
x_count = count * ratio
y_count = count / ratio
x = 0
y = 0
w = 1 / x_count
h = 1 / y_count
for c in colors.cnames:
pos = (x / x_count, y / y_count)
ax.add_patch(patches.Rectangle(pos, w, h, color=c))
ax.annotate(c, xy=pos)
if y >= y_count-1:
x += 1
y = 0
else:
y += 1
plt.show()
I had the same problem, my database log file size was about 39 gigabyte, and after shrinking (both database and files) it reduced to 37 gigabyte that was not enough, so I did this solution: (I did not need the ldf file (log file) anymore)
(**Important) : Get a full backup of your database before the process.
Run "checkpoint" on that database.
Detach that database (right click on the database and chose tasks >> Detach...) {if you see an error, do the steps in the end of this text}
Move MyDatabase.ldf to another folder, you can find it in your hard disk in the same folder as your database (Just in case you need it in the future for some reason such as what user did some task).
Attach the database (right click on Databases and chose Attach...)
On attach dialog remove the .ldf file (which shows 'file not found' comment) and click Ok. (don`t worry the ldf file will be created after the attachment process.)
After that, a new log file create with a size of 504 KB!!!.
In step 2, if you faced an error that database is used by another user, you can:
1.run this command on master database "sp_who2" and see what process using your database.
2.read the process number, for example it is 52 and type "kill 52", now your database is free and ready to detach.
If the number of processes using your database is too much:
1.Open services (type services in windows start) find SQL Server ... process and reset it (right click and chose reset).
Open $CATALINA_BASE/conf/web.xml
and find this
<!-- ==================== Default Session Configuration ================= -->
<!-- You can set the default session timeout (in minutes) for all newly -->
<!-- created sessions by modifying the value below. -->
<session-config>
<session-timeout>30</session-timeout>
</session-config>
all webapps implicitly inherit from this default web descriptor. You can override session-config as well as other settings defined there in your web.xml.
This is actually from my Tomcat 7 (Windows) but I think 5.5 conf is not very different
I saw that no one had used the slice method, so here I put my 2 cents here.
df["<col_name>"].str.slice(stop=5)
df["<col_name>"].str.slice(start=6)
This method will create two new columns.
Add
session_start();
at the beginning of your page before any HTML
You will have something like :
<?php session_start();
include("inc/incfiles/header.inc.php")?>
<html>
<head>
<meta http-equiv="Content-Type" conte...
Don't forget to remove the space you have before
In the <system.web>
element, add the following element:
<httpCookies requireSSL="true" />
However, if you have a <forms>
element in your system.web\authentication
block, then this will override the setting in httpCookies
, setting it back to the default false
.
In that case, you need to add the requireSSL="true"
attribute to the forms element as well.
So you will end up with:
<system.web>
<authentication mode="Forms">
<forms requireSSL="true">
<!-- forms content -->
</forms>
</authentication>
</system.web>
Statically typed programming languages do type checking (i.e. the process of verifying and enforcing the constraints of types) at compile-time as opposed to run-time.
Dynamically typed programming languages do type checking at run-time as opposed to compile-time.
Examples of statically typed languages are :- Java, C, C++
Examples of dynamically typed languages are :- Perl, Ruby, Python, PHP, JavaScript
I find this package quite useful and very simple: https://github.com/amphp/parallel-functions
<?php
use function Amp\ParallelFunctions\parallelMap;
use function Amp\Promise\wait;
$responses = wait(parallelMap([
'https://google.com/',
'https://github.com/',
'https://stackoverflow.com/',
], function ($url) {
return file_get_contents($url);
}));
It will load all 3 urls in parallel. You can also use class instance methods in the closure.
For example I use Laravel extension based on this package https://github.com/spatie/laravel-collection-macros#parallelmap
Here is my code:
/**
* Get domains with all needed data
*/
protected function getDomainsWithdata(): Collection
{
return $this->opensrs->getDomains()->parallelMap(function ($domain) {
$contact = $this->opensrs->getDomainContact($domain);
$contact['domain'] = $domain;
return $contact;
}, 10);
}
It loads all needed data in 10 parallel threads and instead of 50 secs without async it finished in just 8 secs.
Your original plan sounds fine to me. You'll probably find more browser quirks dealing with dynamically managing the <source>
elements, as indicated here by the W3 spec note:
Dynamically modifying a source element and its attribute when the element is already inserted in a video or audio element will have no effect. To change what is playing, just use the src attribute on the media element directly, possibly making use of the canPlayType() method to pick from amongst available resources. Generally, manipulating source elements manually after the document has been parsed is an unncessarily[sic] complicated approach.
http://dev.w3.org/html5/spec/Overview.html#the-source-element
CSS:
.rate-container > i {
float: right;
}
.rate-container > i:HOVER,
.rate-container > i:HOVER ~ i {
color: gold;
}
HTML:
<div class="rate-container">
<i class="fa fa-star "></i>
<i class="fa fa-star "></i>
<i class="fa fa-star "></i>
<i class="fa fa-star "></i>
<i class="fa fa-star "></i>
</div>
I suggest using the amazing tool direnv. With it you can inject environment variables once you cd into the project. These steps worked for me:
.envrc file
source_up
dotenv
.env file
_JAVA_OPTIONS="-DYourEnvHere=123"
You won't gain anything by checking that the key exists. This is the code of HashMap
:
@Override
public boolean containsKey(Object key) {
Entry<K, V> m = getEntry(key);
return m != null;
}
@Override
public V get(Object key) {
Entry<K, V> m = getEntry(key);
if (m != null) {
return m.value;
}
return null;
}
Just check if the return value for get()
is different from null
.
This is the HashMap source code.
Resources :
I had this problem today. I'm using systemjs to load the dependencies.
I was loading the Rxjs like this:
...
paths: {
"rxjs/*": "node_modules/rxjs/bundles/Rx.umd.min.js"
},
...
Instead of use paths use this:
var map = {
...
'rxjs': 'node_modules/rxjs',
...
}
var packages = {
...
'rxjs': { main: 'bundles/Rx.umd.min.js', defaultExtension: 'js' }
...
}
This little change in the way systemjs loads the library fixed my problem.
If you have a std::wstring object, you can call c_str()
on it to get a wchar_t*
:
std::wstring name( L"Steve Nash" );
const wchar_t* szName = name.c_str();
Since you are operating on a narrow string, however, you would first need to widen it. There are various options here; one is to use Windows' built-in MultiByteToWideChar
routine. That will give you an LPWSTR
, which is equivalent to wchar_t*
.
If you have the database named archiedb
, use this:
mysql -p <password for the database> --databases archiedb > /home/database_backup.sql
Assuming this is Linux, choose where the backup file will be saved.
You need to get ObjectNode
type object in order to set values.
Take a look at this
I like Oppositional answer
Anyway, I needed a way to catch the inherited Exception and that solution doesn't satisfy all my needs.
So I ended up changing how he handles OnException and this is my version
public override void OnException(HttpActionExecutedContext actionExecutedContext) {
if (actionExecutedContext == null || actionExecutedContext.Exception == null) {
return;
}
var type = actionExecutedContext.Exception.GetType();
Tuple<HttpStatusCode?, Func<Exception, HttpRequestMessage, HttpResponseMessage>> registration = null;
if (!this.Handlers.TryGetValue(type, out registration)) {
//tento di vedere se ho registrato qualche eccezione che eredita dal tipo di eccezione sollevata (in ordine di registrazione)
foreach (var item in this.Handlers.Keys) {
if (type.IsSubclassOf(item)) {
registration = this.Handlers[item];
break;
}
}
}
//se ho trovato un tipo compatibile, uso la sua gestione
if (registration != null) {
var statusCode = registration.Item1;
var handler = registration.Item2;
var response = handler(
actionExecutedContext.Exception.GetBaseException(),
actionExecutedContext.Request
);
// Use registered status code if available
if (statusCode.HasValue) {
response.StatusCode = statusCode.Value;
}
actionExecutedContext.Response = response;
}
else {
// If no exception handler registered for the exception type, fallback to default handler
actionExecutedContext.Response = DefaultHandler(actionExecutedContext.Exception.GetBaseException(), actionExecutedContext.Request
);
}
}
The core is this loop where I check if the exception type is a subclass of a registered type.
foreach (var item in this.Handlers.Keys) {
if (type.IsSubclassOf(item)) {
registration = this.Handlers[item];
break;
}
}
my2cents
If you want to remove the support for any architecture, for example, ARMv7-s in your case, use menu Project -> Build Settings -> remove the architecture from "valid architectures".
You can use this as a temporary solution until the library has been updated. You have to remove the architecture from your main project, not from the library.
Alternatively, you can set the flag for your debug configuration's "Build Active Architecture Only" to Yes. Leave the release configuration's "Build Active Architecture Only" to No, just so you'll get a reminder before releasing that you ought to upgrade any third-party libraries you're using.
Install nmap,
sudo apt-get install nmap
then
nmap -sP 192.168.1.*
or more commonly
nmap -sn 192.168.1.0/24
will scan the entire .1 to .254 range
This does a simple ping scan in the entire subnet to see which hosts are online.
First of all you missed ScriptService attribute to add in webservice.
[ScriptService]
After then try following method to call webservice via JSON.
var webAddr = "http://Domain/VBRService.asmx/callJson"; var httpWebRequest = (HttpWebRequest)WebRequest.Create(webAddr); httpWebRequest.ContentType = "application/json; charset=utf-8"; httpWebRequest.Method = "POST"; using (var streamWriter = new StreamWriter(httpWebRequest.GetRequestStream())) { string json = "{\"x\":\"true\"}"; streamWriter.Write(json); streamWriter.Flush(); } var httpResponse = (HttpWebResponse)httpWebRequest.GetResponse(); using (var streamReader = new StreamReader(httpResponse.GetResponseStream())) { var result = streamReader.ReadToEnd(); return result; }
No one has explained that you can dynamically define classes. So you can have a decorator that defines (and returns) a subclass:
def addId(cls):
class AddId(cls):
def __init__(self, id, *args, **kargs):
super(AddId, self).__init__(*args, **kargs)
self.__id = id
def getId(self):
return self.__id
return AddId
Which can be used in Python 2 (the comment from Blckknght which explains why you should continue to do this in 2.6+) like this:
class Foo:
pass
FooId = addId(Foo)
And in Python 3 like this (but be careful to use super()
in your classes):
@addId
class Foo:
pass
So you can have your cake and eat it - inheritance and decorators!
Dont work for me, need to put scope in plural
validates_uniqueness_of :teacher_id, :scopes => [:semester_id, :class_id]
You can also use file_put_contents()
:
file_put_contents('ids.txt', implode("\n", $gemList) . "\n", FILE_APPEND);
There are two obvious points, as well as the points in the other answer:
They are exactly equivalent when using sub queries:
SELECT * FROM table
WHERE column IN(subquery);
SELECT * FROM table
WHERE column = ANY(subquery);
On the other hand:
Only the IN
operator allows a simple list:
SELECT * FROM table
WHERE column IN(… , … , …);
Presuming they are exactly the same has caught me out several times when forgetting that ANY
doesn’t work with lists.
First replicate the location and styling of the text and then use Jquery width() function. This will make the measurements accurate. For example you have css styling with a selector of:
.style-head span
{
//Some style set
}
You would need to do this with Jquery already included above this script:
var measuringSpan = document.createElement("span");
measuringSpan.innerText = 'text to measure';
measuringSpan.style.display = 'none'; /*so you don't show that you are measuring*/
$('.style-head')[0].appendChild(measuringSpan);
var theWidthYouWant = $(measuringSpan).width();
Needless to say
theWidthYouWant
will hold the pixel length. Then remove the created elements after you are done or you will get several if this is done a several times. Or add an ID to reference instead.
If, like me, you are doing this for a column which then goes through COALESCE / array_to_json / ARRAY_AGG / row_to_json (PostgreSQL) and want to keep the capitals in the column name, double quote the column name, like so:
SELECT a.price AS "myFirstPrice", b.price AS "mySecondPrice"
Without the quotes (and when using those functions), my column names in camelCase would lose the capital letters.
One easy way to accomplish this is combining what was posted in the original post into a single statement:
int numberOfRecords = dtFoo.Select("IsActive = 'Y'").Length;
Another way to accomplish this is using Linq methods:
int numberOfRecords = dtFoo.AsEnumerable().Where(x => x["IsActive"].ToString() == "Y").ToList().Count;
Note this requires including System.Linq
.
Another way to do this solely with css:
input[type='checkbox'] {
float: left;
width: 20px;
}
input[type='checkbox'] + label {
display: block;
width: 30px;
}
Note that this forces each checkbox and its label onto a separate line, rather than only doing so only when there's overflow.
---
- hosts: all
tasks:
- name: Gather Version
debug:
msg: "The server Operating system is {{ ansible_distribution }} {{ ansible_distribution_major_version }}"
- name: Write Version
local_action: shell echo "This is {{ ansible_distribution }} {{ ansible_distribution_major_version }}" >> /tmp/output
To remove black background only add background-color: white; to the style of
If ANSI_NULLS is set to "ON" and if we apply = , <> on NULL column value while writing select statement then it will not return any result.
Example
create table #tempTable (sn int, ename varchar(50))
insert into #tempTable
values (1, 'Manoj'), (2, 'Pankaj'), (3, NULL), (4, 'Lokesh'), (5, 'Gopal')
SET ANSI_NULLS ON
select * from #tempTable where ename is NULL -- (1 row(s) affected)
select * from #tempTable where ename = NULL -- (0 row(s) affected)
select * from #tempTable where ename is not NULL -- (4 row(s) affected)
select * from #tempTable where ename <> NULL -- (0 row(s) affected)
SET ANSI_NULLS OFF
select * from #tempTable where ename is NULL -- (1 row(s) affected)
select * from #tempTable where ename = NULL -- (1 row(s) affected)
select * from #tempTable where ename is not NULL -- (4 row(s) affected)
select * from #tempTable where ename <> NULL -- (4 row(s) affected)
For those looking for a command-line version, Microsoft released mssql-scripter
to do this:
$ pip install mssql-scripter
# Generate DDL scripts for all database objects and DML scripts (INSERT statements)
# for all tables in the Adventureworks database and save the script files in
# the current directory
$ mssql-scripter -S localhost -d AdventureWorks -U sa --schema-and-data \
-f './' --file-per-object
dbatools.io is a much more active project based on PowerShell, which provides the Get-DbaDbTable and Export-DbaDbTableData cmdlets to achieve this:
PS C:\> Get-DbaDbTable -SqlInstance sql2016 -Database MyDatabase \
-Table 'dbo.Table1', 'dbo.Table2' |
Export-DbaDbTableData -Path C:\temp\export.sql
input(prompt)
is basically equivalent to
def input(prompt):
print(prompt, end='', file=sys.stderr)
return sys.stdin.readline()
You can read directly from sys.stdin
if you like.
lines = sys.stdin.readlines()
lines = [line for line in sys.stdin]
five_lines = list(itertools.islice(sys.stdin, 5))
The first two require that the input end somehow, either by reaching the end of a file or by the user typing Control-D (or Control-Z in Windows) to signal the end. The last one will return after five lines have been read, whether from a file or from the terminal/keyboard.
You need to use the fitBounds()
method.
var markers = [];//some array
var bounds = new google.maps.LatLngBounds();
for (var i = 0; i < markers.length; i++) {
bounds.extend(markers[i]);
}
map.fitBounds(bounds);
Documentation from developers.google.com/maps/documentation/javascript:
fitBounds(bounds[, padding])
Parameters:
`bounds`: [`LatLngBounds`][1]|[`LatLngBoundsLiteral`][1] `padding` (optional): number|[`Padding`][1]
Return Value: None
Sets the viewport to contain the given bounds.
Note: When the map is set todisplay: none
, thefitBounds
function reads the map's size as0x0
, and therefore does not do anything. To change the viewport while the map is hidden, set the map tovisibility: hidden
, thereby ensuring the map div has an actual size.
I try dismis progress on method onPageFinished(), but not good too much, it has time delay to render webview.
try with onPageCommitVisible() better:
val progressBar = ProgressDialog(context)
progressBar.setCancelable(false)
progressBar.show()
val url = "your url here"
web_container.settings.javaScriptEnabled = true
web_container.loadUrl(url)
web_container.webViewClient = object : WebViewClient() {
override fun shouldOverrideUrlLoading(view: WebView, url: String): Boolean {
view.loadUrl(url)
progressBar.show()
return true
}
override fun onPageFinished(view: WebView?, url: String?) {
super.onPageFinished(view, url)
}
override fun onPageCommitVisible(view: WebView?, url: String?) {
super.onPageCommitVisible(view, url)
progressBar.dismiss()
}
}
web_container.setOnKeyListener(View.OnKeyListener { _, keyCode, event ->
if (keyCode == KEYCODE_BACK && event.action == MotionEvent.ACTION_UP
&& web_container.canGoBack()) {
web_container.goBack()
return@OnKeyListener true
}
return@OnKeyListener false
})
I suspect you are running Android 6.0 Marshmallow (API 23) or later. If this is the case, you must implement runtime permissions before you try to read/write external storage.
I know this is an old post, but most of the answers are not tail recursive i.e. they do some operations after returning from the recursive call, and hence not the most efficient.
Here is a tail recursive version:
public Node reverse(Node previous, Node current) {
if(previous == null)
return null;
if(previous.equals(head))
previous.setNext(null);
if(current == null) { // end of list
head = previous;
return head;
} else {
Node temp = current.getNext();
current.setNext(previous);
reverse(current, temp);
}
return null; //should never reach here.
}
Call with:
Node newHead = reverse(head, head.getNext());
Simply remove the .value
from your code.
Set envFrmwrkPath = ActiveSheet.Range("D6").Value
instead of this, use:
Set envFrmwrkPath = ActiveSheet.Range("D6")
Check this Image… You can change your simulator size from here
or press CMD+1, CMD+2 or CMD+3
In Android Studio, open the Device Manager: Tools -> Android -> Android Device Monitor
In Eclipse open the Device Manager:
In the device manager you can add files to the SD Card here:
Try this, if you don't have a primary key or identical column:
select [Stu_Id],[Student_Name] ,[City] ,[Registered],
RowNum = row_number() OVER (ORDER BY (SELECT 0))
from student
ORDER BY RowNum desc
Try the cex
argument:
?par
cex
Just as a heads up...
var data = JSON.parse(responseBody);
has been deprecated.
Postman Learning Center now suggests
var jsonData = pm.response.json();
One shouldn't use set_yticklabels
to change the fontsize, since this will also set the labels (i.e. it will replace any automatic formatter by a FixedFormatter
), which is usually undesired. The easiest is to set the respective tick_params
:
ax.tick_params(axis="x", labelsize=8)
ax.tick_params(axis="y", labelsize=20)
or
ax.tick_params(labelsize=8)
in case both axes shall have the same size.
Of course using the rcParams as in @tmdavison's answer is possible as well.
You are looking for the cp
command. You need to change directories so that you are outside of the directory you are trying to copy.
If the directory you're copying is called dir1
and you want to copy it to your /home/Pictures
folder:
cp -r dir1/ ~/Pictures/
Linux is case-sensitive and also needs the /
after each directory to know that it isn't a file. ~
is a special character in the terminal that automatically evaluates to the current user's home directory. If you need to know what directory you are in, use the command pwd
.
When you don't know how to use a Linux command, there is a manual page that you can refer to by typing:
man [insert command here]
at a terminal prompt.
Also, to auto complete long file paths when typing in the terminal, you can hit Tab after you've started typing the path and you will either be presented with choices, or it will insert the remaining part of the path.
The easiest way to accomplish this on android is by adding the following code to your custom style :
@android:color/transparent
$user_agent = 'yandeX';
$bots = ['Google','Yahoo','Yandex'];
foreach($bots as $b){
if( stripos( $user_agent, $b ) !== false ) return $b;
}
std::string + const char*
results in another std::string
. system
does not take a std::string
, and you cannot concatenate char*
's with the +
operator. If you want to use the code this way you will need:
std::string name = "john";
std::string tmp =
"quickscan.exe resolution 300 selectscanner jpg showui showprogress filename '" +
name + ".jpg'";
system(tmp.c_str());
Here goes mix of weekens's and Vovodroid's solutions.
It is more correct than Vovodroid's solution and more complete than weekens's solution.
try {
InputStream inputStream = res.openRawResource(resId);
try {
BufferedReader reader = new BufferedReader(new InputStreamReader(inputStream));
try {
StringBuilder result = new StringBuilder();
String line;
while ((line = reader.readLine()) != null) {
result.append(line);
}
return result.toString();
} finally {
reader.close();
}
} finally {
inputStream.close();
}
} catch (IOException e) {
// process exception
}
Ross' solution cleaned-up a bit. Only works if all args are pointers. Also language implementation must support eliding of previous comma if __VA_ARGS__
is empty (both Visual Studio C++ and GCC do).
// pass number of arguments version
#define callVardicMethodSafely(...) {value_t *args[] = {NULL, __VA_ARGS__}; _actualFunction(args+1,sizeof(args) / sizeof(*args) - 1);}
// NULL terminated array version
#define callVardicMethodSafely(...) {value_t *args[] = {NULL, __VA_ARGS__, NULL}; _actualFunction(args+1);}
You can also use the good old micro clearfix for this.
#container::before, #container::after{
content: ' ';
display: table;
}
See updated fiddle: http://jsfiddle.net/XB9wX/97/
Static Variables:
Const Variables:
I was trying to figure out if it's possible to browse the code of an earlier commit like you can on GitHub and it brought me here. I used the information I found here, and after fiddling around with the urls, I actually found a way to browse code of old commits as well.
When you're browsing your code the URL is something like:
https://bitbucket.org/user/repo/src/
and by adding a commit hash at the end like this:
https://bitbucket.org/user/repo/src/a0328cb
You can browse the code at the point of that commit. I don't understand why there's no dropdown box for choosing a commit directly, the feature is already there. Strange.
If the web service being invoked uses windows integrated security, creating a NetworkCredential
from the current WindowsIdentity
should be sufficient to allow the web service to use the current users windows login. However, if the web service uses a different security model, there isn't any way to extract a users password from the current identity ... that in and of itself would be insecure, allowing you, the developer, to steal your users passwords. You will likely need to provide some way for your user to provide their password, and keep it in some secure cache if you don't want them to have to repeatedly provide it.
Edit: To get the credentials for the current identity, use the following:
Uri uri = new Uri("http://tempuri.org/");
ICredentials credentials = CredentialCache.DefaultCredentials;
NetworkCredential credential = credentials.GetCredential(uri, "Basic");
Pattern.compile()
allow to reuse a regex multiple times (it is threadsafe). The performance benefit can be quite significant.
I did a quick benchmark:
@Test
public void recompile() {
var before = Instant.now();
for (int i = 0; i < 1_000_000; i++) {
Pattern.compile("ab").matcher("abcde").matches();
}
System.out.println("recompile " + Duration.between(before, Instant.now()));
}
@Test
public void compileOnce() {
var pattern = Pattern.compile("ab");
var before = Instant.now();
for (int i = 0; i < 1_000_000; i++) {
pattern.matcher("abcde").matches();
}
System.out.println("compile once " + Duration.between(before, Instant.now()));
}
compileOnce was between 3x and 4x faster.
I guess it highly depends on the regex itself but for a regex that is often used, I go for a static Pattern pattern = Pattern.compile(...)
As mentioned in the above answer, by updating the bashrc file you can run the pycharm.sh from anywhere on the linux terminal.
But if you love the icon and wants the Desktop shortcuts for the Pycharm on Ubuntu OS then follow the Below steps,
Quick way to create Pycharm launcher.
1. Start Pycharm using the pycharm.sh cmd from anywhere on the terminal or start the pycharm.sh located under bin folder of the pycharm artifact.
2. Once the Pycharm application loads, navigate to tools menu and select “Create Desktop Entry..”
3. Check the box if you want the launcher for all users.
4. If you Check the box i.e “Create entry for all users”, you will be asked for your password.
5. A message should appear informing you that it was successful.
6. Now Restart Pycharm application and you will find Pycharm in Unity dash and Application launcher.."
A few snippets from the HTML5 spec: http://w3c.github.io/html/semantics-scripting.html#element-attrdef-script-async
The defer and async attributes must not be specified if the src attribute is not present.
There are three possible modes that can be selected using these attributes [async and defer]. If the async attribute is present, then the script will be executed asynchronously, as soon as it is available. If the async attribute is not present but the defer attribute is present, then the script is executed when the page has finished parsing. If neither attribute is present, then the script is fetched and executed immediately, before the user agent continues parsing the page.
The exact processing details for these attributes are, for mostly historical reasons, somewhat non-trivial, involving a number of aspects of HTML. The implementation requirements are therefore by necessity scattered throughout the specification. The algorithms below (in this section) describe the core of this processing, but these algorithms reference and are referenced by the parsing rules for script start and end tags in HTML, in foreign content, and in XML, the rules for the document.write() method, the handling of scripting, etc.
If the element has a src attribute, and the element has a defer attribute, and the element has been flagged as "parser-inserted", and the element does not have an async attribute:
The element must be added to the end of the list of scripts that will execute when the document has finished parsing associated with the Document of the parser that created the element.
This is the code for Bootstrap with input search dropdown. I search a lot then i try its in javascript and html with bootstrap,
HTML Code :
<div class="form-group">
<label class="col-xs-3 control-label">Language</label>
<div class="col-xs-7">
<div class="dropdown">
<button id="mydef" class="btn dropdown-toggle" type="button" data-toggle="dropdown" onclick="doOn(this);">
<div class="col-xs-10">
<input type="text" id="search" placeholder="search" onkeyup="doOn(this);"></input>
</div>
<span class="glyphicon glyphicon-search"></span>
</button>
<ul id="def" class="dropdown-menu" style="display:none;" >
<li><a id="HTML" onclick="mydef(this);" >HTML</a></li>
<li><a id="CSS" onclick="mydef(this);" >CSS</a></li>
<li><a id="JavaScript" onclick="mydef(this);" >JavaScript</a></li>
</ul>
<ul id="def1" class="dropdown-menu" style="display:none"></ul>
</div>
</div>
Javascript Code :
function doOn(obj)
{
if(obj.id=="mydef")
{
document.getElementById("def1").style.display="none";
document.getElementById("def").style.display="block";
}
if(obj.id=="search")
{
document.getElementById("def").style.display="none";
document.getElementById("def1").innerHTML='<li><a id="Java" onclick="mydef(this);" >java</a></li><li><a id="oracle" onclick="mydef(this);" >Oracle</a></li>';
document.getElementById("def1").style.display="block";
}
}
function mydef(obj)
{
document.getElementById("search").value=obj.innerHTML;
document.getElementById("def1").style.display="none";
document.getElementById("def").style.display="none";
}
You can use jquery and json code also as per your requirement.
string fileIN = @"C:\myTextFile.txt";
string fileOUT = @"C:\myTextFile_Out.txt";
if (File.Exists(fileIN))
{
string[] data = File.ReadAllLines(fileIN);
foreach (string line in data)
if (!line.Equals("my line to remove"))
File.AppendAllText(fileOUT, line);
File.Delete(fileIN);
File.Move(fileOUT, fileIN);
}
It looks like ByRef needs to know the size of the parameter. A declaration of Dim last_name as string doesn't specify the size of the string so it takes it as an error. Before using Worksheets(data_sheet).Range("C2").Value = ProcessString(last_name) The last_name has to be declared as Dim last_name as string *10 ' size of string is up to you but must be a fix length
No need to change the function. Function doesn't take a fix length declaration.
Here's another possibility:
After receiving this error in vs2012 / win7, I went and tried to delete the file in the bin directory and explorer indicated that the file was in use by the XAML UI Designer.
I closed all the tabs I had open in VS, closed VS, then made sure to kill all MSBuild processes in taskmanager. Finally, after restarting VS I was able to build the solution.
and another possible cause:
I have noticed another possible cause for this issue. After doing some code refactoring, moving projects in and out of a solution, my project references were no longer referencing the projects in the solution as expected.
This mislead visual studio to think it could build some projects concurrently, thus creating the file locks.
EDIT: I have had this happen on a few occasions even recently with VS2012 and it does fix it once I set the build order to the correct dependencies, kill any msbuild processes that VS left running, and then restart VS. I kill the msbuild processes just to be sure, but closing VS should kill them off too.
What I usually do to cause this is refactor a project such that it relies on another project within the solution that it wasn't referencing on last build. This sometimes seem to confuse VS and it doesn't update the build order.
To check build order: Right-click the Solution in the Solution Explorer and select "Project Build Order..." and verify that dependencies are properly noted for each project.
There is no such attribute in Android, to show a shadow. But possible ways to do it are:
Add a plain LinearLayout with grey color, over which add your actual layout, with margin at bottom and right equal to 1 or 2 dp
Have a 9-patch image with a shadow and set it as the background to your Linear layout
for followers, this error message can also mean "you have it referencing a foreign object that hasn't been saved to the DB yet" (even though it's there, and is non null).
No such file or directory
can be also raised if you are trying to put a file argument to Popen
with double-quotes.
For example:
call_args = ['mv', '"path/to/file with spaces.txt"', 'somewhere']
In this case, you need to remove double-quotes.
call_args = ['mv', 'path/to/file with spaces.txt', 'somewhere']
If You try to insert other than the number in the Table column you get Constraint[numbering] error.
Try to insert the only number (or) make your Table column to char Type
As others have said, BeautifulSoup doesn't have xpath support. There are probably a number of ways to get something from an xpath, including using Selenium. However, here's a solution that works in either Python 2 or 3:
from lxml import html
import requests
page = requests.get('http://econpy.pythonanywhere.com/ex/001.html')
tree = html.fromstring(page.content)
#This will create a list of buyers:
buyers = tree.xpath('//div[@title="buyer-name"]/text()')
#This will create a list of prices
prices = tree.xpath('//span[@class="item-price"]/text()')
print('Buyers: ', buyers)
print('Prices: ', prices)
I used this as a reference.
Open config file to edit :
git config --global --edit
Press Insert and remove the setting
and finally type :wq
and Enter to save.
The code you posted is wrong, it should throw an Exception if is catching a specific exception in order to handler IOException but throwing not catched exceptions.
Something like:
public void method() throws Exception{
try{
BufferedReader br = new BufferedReader(new FileReader("file.txt"));
}catch(IOException e){
System.out.println(e.getMessage());
}
}
or
public void method(){
try{
BufferedReader br = new BufferedReader(new FileReader("file.txt"));
}catch(IOException e){
System.out.println("Catching IOException");
System.out.println(e.getMessage());
}catch(Exception e){
System.out.println("Catching any other Exceptions like NullPontException, FileNotFoundExceptioon, etc.");
System.out.println(e.getMessage());
}
}
For a more detailed answer on creating your own colormaps, I highly suggest visiting this page
If that answer is too much work, you can quickly make your own list of colors and pass them to the color
parameter. All the colormaps are in the cm
matplotlib module. Let's get a list of 30 RGB (plus alpha) color values from the reversed inferno colormap. To do so, first get the colormap and then pass it a sequence of values between 0 and 1. Here, we use np.linspace
to create 30 equally-spaced values between .4 and .8 that represent that portion of the colormap.
from matplotlib import cm
color = cm.inferno_r(np.linspace(.4, .8, 30))
color
array([[ 0.865006, 0.316822, 0.226055, 1. ],
[ 0.851384, 0.30226 , 0.239636, 1. ],
[ 0.832299, 0.283913, 0.257383, 1. ],
[ 0.817341, 0.270954, 0.27039 , 1. ],
[ 0.796607, 0.254728, 0.287264, 1. ],
[ 0.775059, 0.239667, 0.303526, 1. ],
[ 0.758422, 0.229097, 0.315266, 1. ],
[ 0.735683, 0.215906, 0.330245, 1. ],
.....
Then we can use this to plot, using the data from the original post:
import random
x = [{i: random.randint(1, 5)} for i in range(30)]
df = pd.DataFrame(x)
df.plot(kind='bar', stacked=True, color=color, legend=False, figsize=(12, 4))
Assuming we imported pandas as pd
and df
is our dataframe
pd.to_datetime(df['date'], unit='s')
works for me.
The basic difference between all these annotations is as follows -
All these annotations along with the usage is defined on Codingeek - Junit5 Test Lifecycle
You need to add the package containing the executable pg_config.
A prior answer should have details you need: pg_config executable not found
I've experienced the same issue because of certifi
library. Installing a different version helped me as well.
Although I agree with @assylias that using @BeforeClass
is a classic solution it is not always convenient. The method annotated with @BeforeClass
must be static. It is very inconvenient for some tests that need instance of test case. For example Spring based tests that use @Autowired
to work with services defined in spring context.
In this case I personally use regular setUp()
method annotated with @Before
annotation and manage my custom static
(!) boolean
flag:
private static boolean setUpIsDone = false;
.....
@Before
public void setUp() {
if (setUpIsDone) {
return;
}
// do the setup
setUpIsDone = true;
}
try this it's very easy to use and tested on IE and Safari and FF and worked fine and beside no need for many div
around it just add id
and it will work fine, after you link you Js and Css files. FaceScroll Custom scrollbar
hope it help's
Edit Step 1: Add the below script to the section of your page:
<link href="general.css" rel="stylesheet" type="text/css">
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script>
<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.18/jquery-ui.min.js"></script>
<script type="text/javascript" src="jquery.ui.touch-punch.min.js"></script>
<script type="text/javascript" src="facescroll.js"></script>
<script type="text/javascript">
jQuery(function(){ // on page DOM load
$('#demo1').alternateScroll();
$('#demo2').alternateScroll({ 'vertical-bar-class': 'styled-v-bar', 'hide-bars': false });
})
</script>
Step 2: Then in the BODY of your page, add the below sample HTML block to your page.
<p><b>Scrollbar (default style) shows onMouseover</b></p>
<div id="demo1" style="width:300px; height:250px; padding:8px; background:lightyellow; border:1px solid gray; resize:both; overflow:scroll">
From Wikipedia- Gunpowder, also known since in the late 19th century as black powder, was the first chemical explosive and the only one known until the mid 1800s.[2] It is a mixture of sulfur, charcoal, and potassium nitrate (saltpeter) - with the sulfur and charcoal acting as fuels, while the saltpeter works as an oxidizer.[3] Because of its
</div>
<br />
<p><b>Scrollbar (alternate style), always shown</b></p>
<div id="demo2" style="width:400px; height:130px; padding:10px; padding-right:8px; background:lightyellow; border:1px solid gray; overflow:scroll; resize:both;">
From Wikipedia- Gunpowder, also known since in the late 19th century as black powder, was the first chemical explosive and the only one known until the mid 1800s.[2] It is a mixture of sulfur, charcoal, and potassium nitrate (saltpeter) - with the sulfur and charcoal acting as fuels, while the saltpeter works as an oxidizer.[3] Because of its
</div>
From the javadoc for Set.iterator()
:
Returns an iterator over the elements in this set. The elements are returned in no particular order (unless this set is an instance of some class that provides a guarantee).
And, as already stated by shuuchan, a TreeSet
is an implemention of Set
that has a guaranteed order:
The elements are ordered using their natural ordering, or by a Comparator provided at set creation time, depending on which constructor is used.
The problem is the TypeError
gets raised 'before' assertRaises
gets called since the arguments to assertRaises
need to be evaluated before the method can be called. You need to pass a lambda
expression like:
self.assertRaises(TypeError, lambda: self.testListNone[:1])
I think the only way to get the tasks that are waiting is to keep a list of tasks you started and let the task remove itself from the list when it's started.
With rabbitmqctl and list_queues you can get an overview of how many tasks are waiting, but not the tasks itself: http://www.rabbitmq.com/man/rabbitmqctl.1.man.html
If what you want includes the task being processed, but are not finished yet, you can keep a list of you tasks and check their states:
from tasks import add
result = add.delay(4, 4)
result.ready() # True if finished
Or you let Celery store the results with CELERY_RESULT_BACKEND and check which of your tasks are not in there.
As an extension to @maerics nice answer, I've added a few useful methods:
public class Tuple<X, Y> {
public final X x;
public final Y y;
public Tuple(X x, Y y) {
this.x = x;
this.y = y;
}
@Override
public String toString() {
return "(" + x + "," + y + ")";
}
@Override
public boolean equals(Object other) {
if (other == this) {
return true;
}
if (!(other instanceof Tuple)){
return false;
}
Tuple<X,Y> other_ = (Tuple<X,Y>) other;
// this may cause NPE if nulls are valid values for x or y. The logic may be improved to handle nulls properly, if needed.
return other_.x.equals(this.x) && other_.y.equals(this.y);
}
@Override
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result + ((x == null) ? 0 : x.hashCode());
result = prime * result + ((y == null) ? 0 : y.hashCode());
return result;
}
}
Use tweet web intent, this is the simple link:
https://twitter.com/intent/tweet?url=<?=urlencode($url)?>
more variables at https://dev.twitter.com/web/tweet-button/web-intent
The nicest solution I have found is to do the following in the first view controller.
Objective-C
- (void)viewWillAppear:(BOOL)animated {
[self.navigationController setNavigationBarHidden:YES animated:animated];
[super viewWillAppear:animated];
}
- (void)viewWillDisappear:(BOOL)animated {
[self.navigationController setNavigationBarHidden:NO animated:animated];
[super viewWillDisappear:animated];
}
Swift
override func viewWillAppear(_ animated: Bool) {
self.navigationController?.setNavigationBarHidden(true, animated: animated)
super.viewWillAppear(animated)
}
override func viewWillDisappear(_ animated: Bool) {
self.navigationController?.setNavigationBarHidden(false, animated: animated)
super.viewWillDisappear(animated)
}
This will cause the navigation bar to animate in from the left (together with the next view) when you push the next UIViewController
on the stack, and animate away to the left (together with the old view), when you press the back button on the UINavigationBar
.
Please note also that these are not delegate methods, you are overriding UIViewController
's implementation of these methods, and according to the documentation you must call the super's implementation somewhere in your implementation.
In swift 5
,
let font = UIFont.systemFont(ofSize: 16)
UISegmentedControl.appearance().setTitleTextAttributes([NSAttributedString.Key.font: font], for: .normal)
You set DockPanel.Dock="Top" to the StackPanel, but the StackPanel is not a child of the DockPanel... the Border is. Your docking property is being ignored.
If you move DockPanel.Dock="Top" to the Border instead, both of your problems will be fixed :)
main.py
setup.py
app/ ->
__init__.py
package_a/ ->
__init__.py
module_a.py
package_b/ ->
__init__.py
module_b.py
python main.py
.main.py
does: import app.package_a.module_a
module_a.py
does import app.package_b.module_b
Alternatively 2 or 3 could use: from app.package_a import module_a
That will work as long as you have app
in your PYTHONPATH. main.py
could be anywhere then.
So you write a setup.py
to copy (install) the whole app package and subpackages to the target system's python folders, and main.py
to target system's script folders.
$date = '2012.11.13';
$dateOfReturn = '2017.10.31';
$substract = str_replace('.', '-', $date);
$substract2 = str_replace('.', '-', $dateOfReturn);
$date1 = $substract;
$date2 = $substract2;
$ts1 = strtotime($date1);
$ts2 = strtotime($date2);
$year1 = date('Y', $ts1);
$year2 = date('Y', $ts2);
$month1 = date('m', $ts1);
$month2 = date('m', $ts2);
echo $diff = (($year2 - $year1) * 12) + ($month2 - $month1);
I'm going to throw my two cents into this question and suggest a slightly more verbose extension of elias's answer. As of gcc 4.6, running of gcc -march=native -v -E - < /dev/null
emits an increasing amount of spam in the form of superfluous -mno-*
flags. The following will strip these:
gcc -march=native -v -E - < /dev/null 2>&1 | grep cc1 | perl -pe 's/ -mno-\S+//g; s/^.* - //g;'
However, I have only verified the correctness of this on two different CPUs (an Intel Core2 and AMD Phenom), so I suggest also running the following script to be sure that all of these -mno-*
flags can be safely stripped.
2021 EDIT: There are indeed machines where -march=native
uses a particular -march
value, but must disable some implied ISAs (Instruction Set Architecture) with -mno-*
.
#!/bin/bash
gcc_cmd="gcc"
# Optionally supply path to gcc as first argument
if (($#)); then
gcc_cmd="$1"
fi
with_mno=$(
"${gcc_cmd}" -march=native -mtune=native -v -E - < /dev/null 2>&1 |
grep cc1 |
perl -pe 's/^.* - //g;'
)
without_mno=$(echo "${with_mno}" | perl -pe 's/ -mno-\S+//g;')
"${gcc_cmd}" ${with_mno} -dM -E - < /dev/null > /tmp/gcctest.a.$$
"${gcc_cmd}" ${without_mno} -dM -E - < /dev/null > /tmp/gcctest.b.$$
if diff -u /tmp/gcctest.{a,b}.$$; then
echo "Safe to strip -mno-* options."
else
echo
echo "WARNING! Some -mno-* options are needed!"
exit 1
fi
rm /tmp/gcctest.{a,b}.$$
I haven't found a difference between gcc -march=native -v -E - < /dev/null
and gcc -march=native -### -E - < /dev/null
other than some parameters being quoted -- and parameters that contain no special characters, so I'm not sure under what circumstances this makes any real difference.
Finally, note that --march=native
was introduced in gcc 4.2, prior to which it is just an unrecognized argument.
Figured it out for myself in the end. It is simple, I was just missing the ** operator to unpack the dictionary
So my example becomes:
d = dict(p1=1, p2=2)
def f2(p1,p2):
print p1, p2
f2(**d)
Changing this project setting solve the issue for me.
try this code
import serial.tools.list_ports
for i in serial.tools.list_ports.comports():
print(i)
it returns
COM1 - Port de communication (COM1)
COM5 - USB-SERIAL CH340 (COM5)
if you just wont the name of the port for exemple COM1
import serial.tools.list_ports
for i in serial.tools.list_ports.comports():
print(str(i).split(" ")[0])
it returns
COM1
COM5
as in my case py 3.7 64bits
If you have password for your dB then
mysql -u <username> -p <DBName> < yourfile.sql
I'd like to add something for Steve Jessop's answer(I can't comment on it since I don't have enough reputation). But I found some helpful material. His answer is very help but he made a mistake: the bucket size should not be a power of 2. I'll just quote from the book "Introduction to Algorithm" by Thomas Cormen, Charles Leisersen, et al on page263:
When using the division method, we usually avoid certain values of m. For example, m should not be a power of 2, since if m = 2^p, then h(k) is just the p lowest-order bits of k. Unless we know that all low-order p-bit patterns are equally likely, we are better off designing the hash function to depend on all the bits of the key. As Exercise 11.3-3 asks you to show, choosing m = 2^p-1 when k is a character string interpreted in radix 2^p may be a poor choice, because permuting the characters of k does not change its hash value.
Hope it helps.
To get the key IDs (8 bytes, 16 hex digits), this is the command which worked for me in GPG 1.4.16, 2.1.18 and 2.2.19:
gpg --list-packets <key.asc | awk '$1=="keyid:"{print$2}'
To get some more information (in addition to the key ID):
gpg --list-packets <key.asc
To get even more information:
gpg --list-packets -vvv --debug 0x2 <key.asc
The command
gpg --dry-run --import <key.asc
also works in all 3 versions, but in GPG 1.4.16 it prints only a short (4 bytes, 8 hex digits) key ID, so it's less secure to identify keys.
Some commands in other answers (e.g. gpg --show-keys
, gpg --with-fingerprint
, gpg --import --import-options show-only
) don't work in some of the 3 GPG versions above, thus they are not portable when targeting multiple versions of GPG.
Here is what I ended up doing and it worked great.
First I moved the file input outside of the form so that it is not submitted:
<input name="imagefile[]" type="file" id="takePictureField" accept="image/*" onchange="uploadPhotos(\'#{imageUploadUrl}\')" />
<form id="uploadImageForm" enctype="multipart/form-data">
<input id="name" value="#{name}" />
... a few more inputs ...
</form>
Then I changed the uploadPhotos
function to handle only the resizing:
window.uploadPhotos = function(url){
// Read in file
var file = event.target.files[0];
// Ensure it's an image
if(file.type.match(/image.*/)) {
console.log('An image has been loaded');
// Load the image
var reader = new FileReader();
reader.onload = function (readerEvent) {
var image = new Image();
image.onload = function (imageEvent) {
// Resize the image
var canvas = document.createElement('canvas'),
max_size = 544,// TODO : pull max size from a site config
width = image.width,
height = image.height;
if (width > height) {
if (width > max_size) {
height *= max_size / width;
width = max_size;
}
} else {
if (height > max_size) {
width *= max_size / height;
height = max_size;
}
}
canvas.width = width;
canvas.height = height;
canvas.getContext('2d').drawImage(image, 0, 0, width, height);
var dataUrl = canvas.toDataURL('image/jpeg');
var resizedImage = dataURLToBlob(dataUrl);
$.event.trigger({
type: "imageResized",
blob: resizedImage,
url: dataUrl
});
}
image.src = readerEvent.target.result;
}
reader.readAsDataURL(file);
}
};
As you can see I'm using canvas.toDataURL('image/jpeg');
to change the resized image into a dataUrl adn then I call the function dataURLToBlob(dataUrl);
to turn the dataUrl into a blob that I can then append to the form. When the blob is created, I trigger a custom event. Here is the function to create the blob:
/* Utility function to convert a canvas to a BLOB */
var dataURLToBlob = function(dataURL) {
var BASE64_MARKER = ';base64,';
if (dataURL.indexOf(BASE64_MARKER) == -1) {
var parts = dataURL.split(',');
var contentType = parts[0].split(':')[1];
var raw = parts[1];
return new Blob([raw], {type: contentType});
}
var parts = dataURL.split(BASE64_MARKER);
var contentType = parts[0].split(':')[1];
var raw = window.atob(parts[1]);
var rawLength = raw.length;
var uInt8Array = new Uint8Array(rawLength);
for (var i = 0; i < rawLength; ++i) {
uInt8Array[i] = raw.charCodeAt(i);
}
return new Blob([uInt8Array], {type: contentType});
}
/* End Utility function to convert a canvas to a BLOB */
Finally, here is my event handler that takes the blob from the custom event, appends the form and then submits it.
/* Handle image resized events */
$(document).on("imageResized", function (event) {
var data = new FormData($("form[id*='uploadImageForm']")[0]);
if (event.blob && event.url) {
data.append('image_data', event.blob);
$.ajax({
url: event.url,
data: data,
cache: false,
contentType: false,
processData: false,
type: 'POST',
success: function(data){
//handle errors...
}
});
}
});
This error can be caused when you are requesting a value from something and you put parenthesis at the end, as if it is a function call, yet the value is correctly retrieved without ending parenthesis. For example, if what you are accessing is a Property 'get' in Typescript.
private IMadeAMistakeHere(): void {
let mynumber = this.SuperCoolNumber();
}
private IDidItCorrectly(): void {
let mynumber = this.SuperCoolNumber;
}
private get SuperCoolNumber(): number {
let response = 42;
return response;
};
Date date = new Date();
Calendar cal = Calendar.getInstance();
cal.setTime(date);
cal.set(Calendar.HOUR_OF_DAY, 0);
cal.set(Calendar.MINUTE, 0);
cal.set(Calendar.SECOND, 0);
cal.set(Calendar.MILLISECOND, 0);
date = cal.getTime();
When you want to create interval store promise to variable:
var p = $interval(function() { ... },1000);
And when you want to stop / clear the interval simply use:
$interval.cancel(p);
I noticed it myself, and found the files inside the backup folder. You can check where it is using Menu:Settings -> Preferences -> Backup. Note : My NPP installation is portable, and on Windows, so YMMV.
In PowerShell and PowerShell ISE, it is also possible to use Shift + Enter at the end of each line for multiline editing (instead of standard backtick `
).
FWIW, here is my approach = a simple one that works for me:
<div id="outerDivWrapper">
<div id="outerDiv">
<div id="scrollableContent">
blah blah blah
</div>
</div>
</div>
html, body {
height: 100%;
margin: 0em;
}
#outerDivWrapper, #outerDiv {
height: 100%;
margin: 0em;
}
#scrollableContent {
height: 100%;
margin: 0em;
overflow-y: auto;
}
You could use the map and reduce functions
const arr = [{x:1},{x:2},{x:4}];
const sum = arr.map(n => n.x).reduce((a, b) => a + b, 0);
Edit: After updating to appcompat-v7:22.1.1 and using AppCompatActivity
instead of ActionBarActivity
my styles.xml looks like:
<style name="AppBaseTheme" parent="Theme.AppCompat.Light">
<item name="colorPrimary">@color/colorPrimary</item>
<item name="colorPrimaryDark">@color/colorPrimaryDark</item>
<item name="colorAccent">@color/colorAccent</item>
<item name="theme">@style/ThemeOverlay.AppCompat.Dark.ActionBar</item>
</style>
Note: This means I am using a Toolbar
provided by the framework (NOT included in an XML file).
This worked for me:
styles.xml file:
<style name="AppBaseTheme" parent="Theme.AppCompat.Light">
<item name="colorPrimary">@color/colorPrimary</item>
<item name="colorPrimaryDark">@color/colorPrimaryDark</item>
<item name="colorAccent">@color/colorAccent</item>
<item name="windowActionBar">false</item>
<item name="theme">@style/ThemeOverlay.AppCompat.Dark.ActionBar</item>
</style>
Update: A quote from Gabriele Mariotti's blog.
With the new Toolbar you can apply a style and a theme. They are different! The style is local to the Toolbar view, for example the background color. The app:theme is instead global to all ui elements inflated in the Toolbar, for example the color of the title and icons.
At Sep 19 2018, these lines worked for me:
File-> Preferences -> Keyboard Shortcuts.
An editor will appear with keybindings.json file. Place the following JSON in there and save.
// Place your key bindings in this file to overwrite the defaults
[
{
"key": "ctrl+shift+u",
"command": "editor.action.transformToUppercase",
"when": "editorTextFocus"
},
{
"key": "ctrl+shift+l",
"command": "editor.action.transformToLowercase",
"when": "editorTextFocus"
},
]
If you want to remove derived data manually just run:
rm -rf ~/Library/Developer/Xcode/DerivedData
If you want to free up more disk space there's a few other directories you might want to clear out as well though.
I have created a Bash script for removing all kinds of files generated by Xcode. Removing DerivedData content can be done by running:
./xcode-clean.sh -d
More info at https://github.com/niklasberglund/xcode-clean.sh
If you set a breakpoint, you can paste this into the debugger to print the view hierarchy:
po [[UIWindow keyWindow] recursiveDescription]
You should be able to find your view's parent somewhere in that mess :)
git rev-parse --abbrev-ref HEAD
This is a more general answer to the missing "Select cond1, stmt1, ... else stmtelse" connstruction in R. It's a bit gassy, but it works an resembles the switch statement present in C
while (TRUE) {
if (is.na(val)) {
val <- "NULL"
break
}
if (inherits(val, "POSIXct") || inherits(val, "POSIXt")) {
val <- paste0("#", format(val, "%Y-%m-%d %H:%M:%S"), "#")
break
}
if (inherits(val, "Date")) {
val <- paste0("#", format(val, "%Y-%m-%d"), "#")
break
}
if (is.numeric(val)) break
val <- paste0("'", gsub("'", "''", val), "'")
break
}
You should be okay to just take the height property out of the CSS.
This worked for me: Open task manager (of your OS) and kill adb.exe process. Now start adb again, now adb should start normally.
I have used Gnostice in the past and found them to be very good.
I faced same issue while using card-columns
i fixed it using
display: inline-flex ;
column-break-inside: avoid;
width:100%;
Patch builtins.open
and use mock_open
, which is part of the mock
framework. patch
used as a context manager returns the object used to replace the patched one:
from unittest.mock import patch, mock_open
with patch("builtins.open", mock_open(read_data="data")) as mock_file:
assert open("path/to/open").read() == "data"
mock_file.assert_called_with("path/to/open")
If you want to use patch
as a decorator, using mock_open()
's result as the new=
argument to patch
can be a little bit weird. Instead, use patch
's new_callable=
argument and remember that every extra argument that patch
doesn't use will be passed to the new_callable
function, as described in the patch
documentation:
patch()
takes arbitrary keyword arguments. These will be passed to theMock
(or new_callable) on construction.
@patch("builtins.open", new_callable=mock_open, read_data="data")
def test_patch(mock_file):
assert open("path/to/open").read() == "data"
mock_file.assert_called_with("path/to/open")
Remember that in this case patch
will pass the mocked object as an argument to your test function.
You need to patch __builtin__.open
instead of builtins.open
and mock
is not part of unittest
, you need to pip install
and import it separately:
from mock import patch, mock_open
with patch("__builtin__.open", mock_open(read_data="data")) as mock_file:
assert open("path/to/open").read() == "data"
mock_file.assert_called_with("path/to/open")
Here's how you could set a custom cookie value for the request:
var baseAddress = new Uri("http://example.com");
var cookieContainer = new CookieContainer();
using (var handler = new HttpClientHandler() { CookieContainer = cookieContainer })
using (var client = new HttpClient(handler) { BaseAddress = baseAddress })
{
var content = new FormUrlEncodedContent(new[]
{
new KeyValuePair<string, string>("foo", "bar"),
new KeyValuePair<string, string>("baz", "bazinga"),
});
cookieContainer.Add(baseAddress, new Cookie("CookieName", "cookie_value"));
var result = await client.PostAsync("/test", content);
result.EnsureSuccessStatusCode();
}
Hope it helps .
c# 7.0 lets you do this:
var tupleList = new List<(int, string)>
{
(1, "cow"),
(5, "chickens"),
(1, "airplane")
};
If you don't need a List
, but just an array, you can do:
var tupleList = new(int, string)[]
{
(1, "cow"),
(5, "chickens"),
(1, "airplane")
};
And if you don't like "Item1" and "Item2", you can do:
var tupleList = new List<(int Index, string Name)>
{
(1, "cow"),
(5, "chickens"),
(1, "airplane")
};
or for an array:
var tupleList = new (int Index, string Name)[]
{
(1, "cow"),
(5, "chickens"),
(1, "airplane")
};
which lets you do: tupleList[0].Index
and tupleList[0].Name
Framework 4.6.2 and below
You must install System.ValueTuple
from the Nuget Package Manager.
Framework 4.7 and above
It is built into the framework. Do not install System.ValueTuple
. In fact, remove it and delete it from the bin directory.
note: In real life, I wouldn't be able to choose between cow, chickens or airplane. I would be really torn.
Just do this
if type(lst) in (list, tuple):
# Do stuff
The problem is that you're reading nextLine()
on the while loop and THEN reading it to a variable. Not only are you getting every 2nd line printed out you're opening yourself to the exception being thrown. An example:
File:
Hello,
Blah blah blah,
Sincerely,
CapnStank
PS. Something something
On first iteration through the loop. The check on while will consume the "Hello," as not equal to null. Inside the loop body you'll see Blah blah blah,
printed to the System.
The process will repeat with Sincerely, being consumed and Capnstank printing out.
Finally the while will consume the "PS" line while the String line = fileReader.nextLine()
retreives an exception from the file because there's nothing further to read.
To resolve the issue:
String line = fileReader.nextLine();
while (line != null) {
System.out.println(line);
line = fileReader.nextLine();
}
Trying to cover the whole world with one regular expression is not completely possible, and certainly not feasible or recommended.
Not to toot my own horn, but I've written some pretty thorough regular expressions which you may find helpful.
Basic validation:
^[ABCEGHJ-NPRSTVXY]{1}[0-9]{1}[ABCEGHJ-NPRSTV-Z]{1}[ ]?[0-9]{1}[ABCEGHJ-NPRSTV-Z]{1}[0-9]{1}$
Extended validation:
^(A(0[ABCEGHJ-NPR]|1[ABCEGHK-NSV-Y]|2[ABHNV]|5[A]|8[A])|B(0[CEHJ-NPRSTVW]|1[ABCEGHJ-NPRSTV-Y]|2[ABCEGHJNRSTV-Z]|3[ABEGHJ-NPRSTVZ]|4[ABCEGHNPRV]|5[A]|6[L]|9[A])|C(0[AB]|1[ABCEN])|E(1[ABCEGHJNVWX]|2[AEGHJ-NPRSV]|3[ABCELNVYZ]|4[ABCEGHJ-NPRSTV-Z]|5[ABCEGHJ-NPRSTV]|6[ABCEGHJKL]|7[ABCEGHJ-NP]|8[ABCEGJ-NPRST]|9[ABCEGH])|G(0[ACEGHJ-NPRSTV-Z]|1[ABCEGHJ-NPRSTV-Y]|2[ABCEGJ-N]|3[ABCEGHJ-NZ]|4[ARSTVWXZ]|5[ABCHJLMNRTVXYZ]|6[ABCEGHJKLPRSTVWXZ]|7[ABGHJKNPSTXYZ]|8[ABCEGHJ-NPTVWYZ]|9[ABCHNPRTX])|H(0[HM]|1[ABCEGHJ-NPRSTV-Z]|2[ABCEGHJ-NPRSTV-Z]|3[ABCEGHJ-NPRSTV-Z]|4[ABCEGHJ-NPRSTV-Z]|5[AB]|7[ABCEGHJ-NPRSTV-Y]|8[NPRSTYZ]|9[ABCEGHJKPRSWX])|J(0[ABCEGHJ-NPRSTV-Z]|1[ACEGHJ-NRSTXZ]|2[ABCEGHJ-NRSTWXY]|3[ABEGHLMNPRTVXYZ]|4[BGHJ-NPRSTV-Z]|5[ABCJ-MRTV-Z]|6[AEJKNRSTVWYXZ]|7[ABCEGHJ-NPRTV-Z]|8[ABCEGHLMNPRTVXYZ]|9[ABEHJLNTVXYZ])|K(0[ABCEGHJ-M]|1[ABCEGHJ-NPRSTV-Z]|2[ABCEGHJ-MPRSTVW]|4[ABCKMPR]|6[AHJKTV]|7[ACGHK-NPRSV]|8[ABHNPRV]|9[AHJKLV])|L(0[[ABCEGHJ-NPRS]]|1[ABCEGHJ-NPRSTV-Z]|2[AEGHJMNPRSTVW]|3[BCKMPRSTVXYZ]|4[ABCEGHJ-NPRSTV-Z]|5[ABCEGHJ-NPRSTVW]|6[ABCEGHJ-MPRSTV-Z]|7[ABCEGJ-NPRST]|8[EGHJ-NPRSTVW]|9[ABCGHK-NPRSTVWYZ])|M(1[BCEGHJ-NPRSTVWX]|2[HJ-NPR]|3[ABCHJ-N]|4[ABCEGHJ-NPRSTV-Y]|5[ABCEGHJ-NPRSTVWX]|6[ABCEGHJ-NPRS]|7[AY]|8[V-Z]|9[ABCLMNPRVW])|N(0[ABCEGHJ-NPR]|1[ACEGHKLMPRST]|2[ABCEGHJ-NPRTVZ]|3[ABCEHLPRSTVWY]|4[BGKLNSTVWXZ]|5[ACHLPRV-Z]|6[ABCEGHJ-NP]|7[AGLMSTVWX]|8[AHMNPRSTV-Y]|9[ABCEGHJKVY])|P(0[ABCEGHJ-NPRSTV-Y]|1[ABCHLP]|2[ABN]|3[ABCEGLNPY]|4[NPR]|5[AEN]|6[ABC]|7[ABCEGJKL]|8[NT]|9[AN])|R(0[ABCEGHJ-M]|1[ABN]|2[CEGHJ-NPRV-Y]|3[ABCEGHJ-NPRSTV-Y]|4[AHJKL]|5[AGH]|6[MW]|7[ABCN]|8[AN]|9[A])|S(0[ACEGHJ-NP]|2[V]|3[N]|4[AHLNPRSTV-Z]|6[HJKVWX]|7[HJ-NPRSTVW]|9[AHVX])|T(0[ABCEGHJ-MPV]|1[ABCGHJ-MPRSV-Y]|2[ABCEGHJ-NPRSTV-Z]|3[ABCEGHJ-NPRZ]|4[ABCEGHJLNPRSTVX]|5[ABCEGHJ-NPRSTV-Z]|6[ABCEGHJ-NPRSTVWX]|7[AENPSVXYZ]|8[ABCEGHLNRSVWX]|9[ACEGHJKMNSVWX])|V(0[ABCEGHJ-NPRSTVWX]|1[ABCEGHJ-NPRSTV-Z]|2[ABCEGHJ-NPRSTV-Z]|3[ABCEGHJ-NRSTV-Y]|4[ABCEGK-NPRSTVWXZ]|5[ABCEGHJ-NPRSTV-Z]|6[ABCEGHJ-NPRSTV-Z]|7[ABCEGHJ-NPRSTV-Y]|8[ABCGJ-NPRSTV-Z]|9[ABCEGHJ-NPRSTV-Z])|X(0[ABCGX]|1[A])|Y(0[AB]|1[A]))[ ]?[0-9]{1}[ABCEGHJ-NPRSTV-Z]{1}[0-9]{1}$
^[0-9]{5}(-[0-9]{4})?$
^([A-PR-UWYZ]([0-9]{1,2}|([A-HK-Y][0-9]|[A-HK-Y][0-9]([0-9]|[ABEHMNPRV-Y]))|[0-9][A-HJKS-UW])\ [0-9][ABD-HJLNP-UW-Z]{2}|(GIR\ 0AA)|(SAN\ TA1)|(BFPO\ (C\/O\ )?[0-9]{1,4})|((ASCN|BBND|[BFS]IQQ|PCRN|STHL|TDCU|TKCA)\ 1ZZ))$
It is not possible to guarantee accuracy without actually mailing something to an address and having the person let you know when they receive it, but we can narrow things by down by eliminating cases that we know are bad.
Try this one http://jsfiddle.net/Husamuddin/ByNa3/
it works fine with me,
css
.table {
width:100%;
height:100%;
position:absolute;
display:table;
}
.cell {
display:table-cell;
vertical-align:middle;
width:100%;
height:100%:
}
and the html
<div class="table">
<div class="cell">Hello, I'm in the middle</div>
</div>
No jQuery needed... Working Example
var arr2 = arr1.slice()
This copys the array from the starting position 0
through the end of the array.
It is important to note that it will work as expected for primitive types (string, number, etc.), and to also explain the expected behavior for reference types...
If you have an array of Reference types, say of type Object
. The array will be copied, but both of the arrays will contain references to the same Object
's. So in this case it would seem like the array is copied by reference even though the array is actually copied.
The default return value of methods you haven't stubbed yet is false
for boolean methods, an empty collection or map for methods returning collections or maps and null
otherwise.
This also applies to method calls within when(...)
. In you're example when(myService.getListWithData(inputData).get())
will cause a NullPointerException because myService.getListWithData(inputData)
is null
- it has not been stubbed before.
One option is create mocks for all intermediate return values and stub them before use. For example:
ListWithData listWithData = mock(ListWithData.class);
when(listWithData.get()).thenReturn(item1);
when(myService.getListWithData()).thenReturn(listWithData);
Or alternatively, you can specify a different default answer when creating a mock, to make methods return a new mock instead of null: RETURNS_DEEP_STUBS
SomeService myService = mock(SomeService.class, Mockito.RETURNS_DEEP_STUBS);
when(myService.getListWithData().get()).thenReturn(item1);
You should read the Javadoc of Mockito.RETURNS_DEEP_STUBS which explains this in more detail and also has some warnings about its usage.
I hope this helps. Just note that your example code seems to have more issues, such as missing assert or verify statements and calling setters on mocks (which does not have any effect).
The above are all excellent answers. I just wanted to add that when there are multiple characters to check against, an if-else might turn out better since you could instead write the following.
// switch on vowels, digits, punctuation, or consonants
char c; // assign some character to 'c'
if ("aeiouAEIOU".indexOf(c) != -1) {
// handle vowel case
} else if ("!@#$%,.".indexOf(c) != -1) {
// handle punctuation case
} else if ("0123456789".indexOf(c) != -1) {
// handle digit case
} else {
// handle consonant case, assuming other characters are not possible
}
Of course, if this gets any more complicated, I'd recommend a regex matcher.
There is not any safe way to include php
file into js
.
One thing you can do as define
your php file data as javascript global variable
in php file. for example i have three variable which i want to use as js.
abc.php
<?php
$abc = "Abc";
$number = 052;
$mydata = array("val1","val2","val3");
?>
<script type="text/javascript">
var abc = '<?php echo $abc?>';
var number = '<?php echo $number ?>';
var mydata = <?php echo json_encode($mydata); ?>;
</script>
After use
it directly in your js file
wherever you want to use.
abc.js
function test(){
alert('Print php variable : '+ abc +', '+number);
}
function printArrVar(){
alert('print php array variable : '+ JSON.stringify(mydata));
}
Beside If you have any critical data which you don't want to show publicly then you can encrypt data with js. and also get original value of it's from js so no one can get it's original value. if they show into publicly.
this is the standard way you can call php script data into js file without including js into php code or php script into js.
Sorry, but none of the previous solutions helped me. I need to check both sides: SecurityManager and SO permissions. I have learned a lot with Josh code and with iain answer, but I'm afraid I need to use Rakesh code (also thanks to him). Only one bug: I found that he only checks for Allow and not for Deny permissions. So my proposal is:
string folder;
AuthorizationRuleCollection rules;
try {
rules = Directory.GetAccessControl(folder)
.GetAccessRules(true, true, typeof(System.Security.Principal.NTAccount));
} catch(Exception ex) { //Posible UnauthorizedAccessException
throw new Exception("No permission", ex);
}
var rulesCast = rules.Cast<FileSystemAccessRule>();
if(rulesCast.Any(rule => rule.AccessControlType == AccessControlType.Deny)
|| !rulesCast.Any(rule => rule.AccessControlType == AccessControlType.Allow))
throw new Exception("No permission");
//Here I have permission, ole!
Perhaps:
> data.frame(aname=NA, bname=NA)[numeric(0), ]
[1] aname bname
<0 rows> (or 0-length row.names)
Why do we have to write that 5 line code ?
public class EnumTest {
public enum MyEnum {
A, B, C, D;
}
@Test
public void test() throws Exception {
MyEnum.valueOf("A"); //gives you A
//this throws ILlegalargument without having to do any lookup
MyEnum.valueOf("RADD");
}
}
GLSL Shader version based on Patapoms answer:
vec3 HSV2RGB( vec3 hsv )
{
hsv.x = mod( 100.0 + hsv.x, 1.0 ); // Ensure [0,1[
float HueSlice = 6.0 * hsv.x; // In [0,6[
float HueSliceInteger = floor( HueSlice );
float HueSliceInterpolant = HueSlice - HueSliceInteger; // In [0,1[ for each hue slice
vec3 TempRGB = vec3( hsv.z * (1.0 - hsv.y), hsv.z * (1.0 - hsv.y * HueSliceInterpolant), hsv.z * (1.0 - hsv.y * (1.0 - HueSliceInterpolant)) );
float IsOddSlice = mod( HueSliceInteger, 2.0 ); // 0 if even (slices 0, 2, 4), 1 if odd (slices 1, 3, 5)
float ThreeSliceSelector = 0.5 * (HueSliceInteger - IsOddSlice); // (0, 1, 2) corresponding to slices (0, 2, 4) and (1, 3, 5)
vec3 ScrollingRGBForEvenSlices = vec3( hsv.z, TempRGB.zx ); // (V, Temp Blue, Temp Red) for even slices (0, 2, 4)
vec3 ScrollingRGBForOddSlices = vec3( TempRGB.y, hsv.z, TempRGB.x ); // (Temp Green, V, Temp Red) for odd slices (1, 3, 5)
vec3 ScrollingRGB = mix( ScrollingRGBForEvenSlices, ScrollingRGBForOddSlices, IsOddSlice );
float IsNotFirstSlice = clamp( ThreeSliceSelector, 0.0,1.0 ); // 1 if NOT the first slice (true for slices 1 and 2)
float IsNotSecondSlice = clamp( ThreeSliceSelector-1.0, 0.0,1. ); // 1 if NOT the first or second slice (true only for slice 2)
return mix( ScrollingRGB.xyz, mix( ScrollingRGB.zxy, ScrollingRGB.yzx, IsNotSecondSlice ), IsNotFirstSlice ); // Make the RGB rotate right depending on final slice index
}
Create a copy of executables of same service and paste it on the same path of the existing service and then uninstall.
You can save a BufferedImage
object using write method of the javax.imageio.ImageIO
class. The signature of the method is like this:
public static boolean write(RenderedImage im, String formatName, File output) throws IOException
Here im
is the RenderedImage
to be written, formatName
is the String containing the informal name of the format (e.g. png) and output
is the file object to be written to. An example usage of the method for PNG file format is shown below:
ImageIO.write(image, "png", file);
I always do the following whenever I get such error:
// remove node_modules/
rm -rf node_modules/
// install node_modules/ again
npm install // or, yarn
and then start the project
npm start //or, yarn start
It works fine after re-installing node_modules. But I don't know if it's good practice.
You have by default the static
endpoint for static files. Also Flask
application has the following arguments:
static_url_path
: can be used to specify a different path for the static files on the web. Defaults to the name of the static_folder
folder.
static_folder
: the folder with static files that should be served at static_url_path
. Defaults to the 'static' folder in the root path of the application.
It means that the filename
argument will take a relative path to your file in static_folder
and convert it to a relative path combined with static_url_default
:
url_for('static', filename='path/to/file')
will convert the file path from static_folder/path/to/file
to the url path static_url_default/path/to/file
.
So if you want to get files from the static/bootstrap
folder you use this code:
<link rel="stylesheet" type="text/css" href="{{ url_for('static', filename='bootstrap/bootstrap.min.css') }}">
Which will be converted to (using default settings):
<link rel="stylesheet" type="text/css" href="static/bootstrap/bootstrap.min.css">
Also look at url_for
documentation.
The below simple commands can create a virtual env with version 3.5
apt-get install python3-venv
python3.5 -m venv <your env name>
if you want virtual env version as 3.6
python3.6 -m venv <your env name>
An IntPtr is an integer which is the same size as a pointer.
You can use IntPtr to store a pointer value in a non-pointer type. This feature is important in .NET since using pointers is highly error prone and therefore illegal in most contexts. By allowing the pointer value to be stored in a "safe" data type, plumbing between unsafe code segments may be implemented in safer high-level code -- or even in a .NET language that doesn't directly support pointers.
The size of IntPtr is platform-specific, but this detail rarely needs to be considered, since the system will automatically use the correct size.
The name "IntPtr" is confusing -- something like Handle
might have been more appropriate. My initial guess was that "IntPtr" was a pointer to an integer. The MSDN documentation of IntPtr goes into somewhat cryptic detail without ever providing much insight about the meaning of the name.
An IntPtr
is a pointer with two limitations:
In other words, an IntPtr
is just like a void*
-- but with the extra feature that it can (but shouldn't) be used for basic pointer arithmetic.
In order to dereference an IntPtr
, you can either cast it to a true pointer (an operation which can only be performed in "unsafe" contexts) or you can pass it to a helper routine such as those provided by the InteropServices.Marshal
class. Using the Marshal
class gives the illusion of safety since it doesn't require you to be in an explicit "unsafe" context. However, it doesn't remove the risk of crashing which is inherent in using pointers.
I think this decision is appropriate for guys who prefer the declarative functional programming over the imperative OOP or the procedural. If your question is "Is there some values inside? (a truthy or a falsy value)" you can use .some
method to validate the values inside.
[].some(el => el || !el);
function isEmpty(arr) { ... }
.[].length
resulting to 0
which is dangerous in some cases.[].length > 0
saying "Is its length greater than zero?"Advanced examples:
[ ].some(el => el || !el); // false
[null].some(el => el || !el); // true
[1, 3].some(el => el || !el); // true
A thread often acts in response to the action of another thread. If the other thread's action is also a response to the action of another thread, then livelock may result.
As with deadlock, livelocked threads are unable to make further progress. However, the threads are not blocked — they are simply too busy responding to each other to resume work. This is comparable to two people attempting to pass each other in a corridor: Alphonse moves to his left to let Gaston pass, while Gaston moves to his right to let Alphonse pass. Seeing that they are still blocking each other, Alphonse moves to his right, while Gaston moves to his left. They're still blocking each other, and so on...
The main difference between livelock and deadlock is that threads are not going to be blocked, instead they will try to respond to each other continuously.
In this image, both circles (threads or processes) will try to give space to the other by moving left and right. But they can't move any further.
You can use Web SQL API which is an ordinary SQLite database in your browser and you can open/modify it like any other SQLite databases for example with Lita.
Chrome locates databases automatically according to domain names or extension id. A few months ago I posted on my blog short article on how to delete Chrome's database because when you're testing some functionality it's quite useful.
Doing the expicit casting to the "int" solves the problem in my case. I had the same issue. So:
int count = (int)[myColors count];
On a MacBook Pro, I used the following (inspired by https://stackoverflow.com/a/19457213/6169225):
sed -i '' -e 's/<STR_TO_REPLACE>/<REPLACEMENT_STR>/g' *
-i ''
will ensure you are taking no backups.
-e
for modern regex.
I had exactly the same error message. In my case, making an entry in my /etc/hosts
file (on the server hosting the service) for the target server referenced in the WSDL fixed it.
Kind of a strangely worded error message..
What about CassandraDB, Project Voldemort, TokyoCabinet?
To do it without using a JavaScript library such as jQuery, you'd do it like this:
var span = document.getElementById("myspan"),
text = document.createTextNode(''+intValue);
span.innerHTML = ''; // clear existing
span.appendChild(text);
If you do want to use jQuery, it's just this:
$("#myspan").text(''+intValue);
function stripTrailingSlash(text) {
return text
.split('/')
.filter(Boolean)
.join('/');
}
another solution.
I've recently ren into this issue with Commodo cert I bought on ssls.com and I've had 3 files:
domain-name.ca-bundle domain-name.crt and domain-name.p7b
I've had to set it up on Nginx and this is the command I ran:
cat domain-name.ca-bundle domain-name.crt > commodo-ssl-bundle.crt
I then used commodo-ssl-bundle.crt inside the Nginx config file and works like a charm.
In Reactive forms. Binding can be done in the component file and usage of ngValue. For more details please go through the following link
https://angular.io/api/forms/SelectControlValueAccessor
import {Component} from '@angular/core';
import {FormControl, FormGroup} from '@angular/forms';
@Component({
selector: 'example-app',
template: `
<form [formGroup]="form">
<select formControlName="state">
<option *ngFor="let state of states" [ngValue]="state">
{{ state.abbrev }}
</option>
</select>
</form>
<p>Form value: {{ form.value | json }}</p>
<!-- {state: {name: 'New York', abbrev: 'NY'} } -->
`,
})
export class ReactiveSelectComp {
states = [
{name: 'Arizona', abbrev: 'AZ'},
{name: 'California', abbrev: 'CA'},
{name: 'Colorado', abbrev: 'CO'},
{name: 'New York', abbrev: 'NY'},
{name: 'Pennsylvania', abbrev: 'PA'},
];
form = new FormGroup({
state: new FormControl(this.states[3]),
});
}
I think Nosql is "more suitable" in these scenarios at least (more supplementary is welcome)
Easy to scale horizontally by just adding more nodes.
Query on large data set
Imagine tons of tweets posted on twitter every day. In RDMS, there could be tables with millions (or billions?) of rows, and you don't want to do query on those tables directly, not even mentioning, most of time, table joins are also needed for complex queries.
Disk I/O bottleneck
If a website needs to send results to different users based on users' real-time info, we are probably talking about tens or hundreds of thousands of SQL read/write requests per second. Then disk i/o will be a serious bottleneck.
ArrayList: ArrayList has a structure like an array, it has a direct reference to every element. So rendom access is fast in ArrayList.
LinkedList: In LinkedList for getting nth elemnt you have to traverse whole list, takes time as compared to ArrayList. Every element has a link to its previous & nest element, so deletion is fast.
You want to create an empty list, then append the created list to it. This will give you the list of lists. Example:
>>> l = []
>>> l.append([1,2,3])
>>> l.append([4,5,6])
>>> l
[[1, 2, 3], [4, 5, 6]]
I use this:
var myapp = angular.module('myApp', [])
// allow DI for use in controllers, unit tests
.constant('_', window._)
// use in views, ng-repeat="x in _.range(3)"
.run(function ($rootScope) {
$rootScope._ = window._;
});
See https://github.com/angular/angular.js/wiki/Understanding-Dependency-Injection about halfway for some more info on run
.
for(int i = 1; i <= 256; i++)
{
System.out.print(i + " "); //show integer
System.out.println(Integer.toBinaryString(i) + " "); //show binary
System.out.print(Integer.toOctalString(i) + " "); //show octal
System.out.print(Integer.toHexString(i) + " "); //show hex
}
This works also in Python 3.x and centers the window on screen:
from tkinter import *
app = Tk()
app.eval('tk::PlaceWindow . center')
app.mainloop()
If someone still comes here, this is my take:
$('.selector').click(myCallbackFunction.bind({var1: 'hello', var2: 'world'}));
function myCallbackFunction(event) {
var passedArg1 = this.var1,
passedArg2 = this.var2
}
What happens here, after binding to the callback function, it will be available within the function as this
.
This idea comes from how React uses the bind
functionality.
You can simply type Q:
and that should solve your problem.
You were close:
if (typeof a_string === 'string') {
// this is a string
}
On a related note: the above check won't work if a string is created with new String('hello')
as the type will be Object
instead. There are complicated solutions to work around this, but it's better to just avoid creating strings that way, ever.
Give full access of .composer to user.
sudo chown -R 'user-name' /home/'user-name'/.composer
or
sudo chmod 777 -R /home/'user-name'/.composer
user-name
is your system user-name.
to get user-name type "whoami" in terminal:
The simplest way that doesn't require third party libraries it to create a URL object and then call either openConnection or openStream on it. Note that this is a pretty basic API, so you won't have a lot of control over the headers.
OK, after 2 years it's finally time to correct the syntax:
SELECT t1.value, t2.value
FROM MyTable t1
JOIN MyTable t2
ON t1.id = t2.id
WHERE t1.id = @id
AND t1.status = @status1
AND t2.status = @status2
Find out two pieces of information
$> telnet <hostname or ip> <port>
Assuming the daemon is up and running and listening on that port it should etablish a telnet session. Likely causes:
Use This:
.modal-full {
min-width: 100%;
margin: 0;
}
.modal-full .modal-content {
min-height: 100vh;
}
and so:
<div id="myModal" class="modal" role="dialog">
<div class="modal-dialog modal-full">
<!-- Modal content-->
<div class="modal-content ">
<div class="modal-header ">
<button type="button" class="close" data-dismiss="modal">×
</button>
<h4 class="modal-title">hi</h4>
</div>
<div class="modal-body">
<p>Some text in the modal.</p>
</div>
</div>
</div>
</div>
Do not apply an explicit width or height to the image tag. Instead, give it:
max-width:100%;
max-height:100%;
Also, height: auto;
if you want to specify a width only.
Example: http://jsfiddle.net/xwrvxser/1/
img {_x000D_
max-width: 100%;_x000D_
max-height: 100%;_x000D_
}_x000D_
_x000D_
.portrait {_x000D_
height: 80px;_x000D_
width: 30px;_x000D_
}_x000D_
_x000D_
.landscape {_x000D_
height: 30px;_x000D_
width: 80px;_x000D_
}_x000D_
_x000D_
.square {_x000D_
height: 75px;_x000D_
width: 75px;_x000D_
}
_x000D_
Portrait Div_x000D_
<div class="portrait">_x000D_
<img src="http://i.stack.imgur.com/xkF9Q.jpg">_x000D_
</div>_x000D_
_x000D_
Landscape Div_x000D_
<div class="landscape">_x000D_
<img src="http://i.stack.imgur.com/xkF9Q.jpg">_x000D_
</div>_x000D_
_x000D_
Square Div_x000D_
<div class="square">_x000D_
<img src="http://i.stack.imgur.com/xkF9Q.jpg">_x000D_
</div>
_x000D_
Wildcards can only be used in the ServerAlias
rather than the ServerName
. Something which had me stumped.
For your use case, the following should suffice
<VirtualHost *:80>
ServerAlias *.example.com
VirtualDocumentRoot /var/www/%1/
</VirtualHost>
All of the javascript functions given here won't work for an xml document having unspecified white spaces between the end tag '>' and the start tag '<'. To fix them, you just need to replace the first line in the functions
var reg = /(>)(<)(\/*)/g;
by
var reg = /(>)\s*(<)(\/*)/g;
They're used in different places. group by
modifies the entire query, like:
select customerId, count(*) as orderCount
from Orders
group by customerId
But partition by
just works on a window function, like row_number
:
select row_number() over (partition by customerId order by orderId)
as OrderNumberForThisCustomer
from Orders
A group by
normally reduces the number of rows returned by rolling them up and calculating averages or sums for each row. partition by
does not affect the number of rows returned, but it changes how a window function's result is calculated.
Safe navigation operator or Existential Operator or Null Propagation Operator is supported in Angular Template. Suppose you have Component class
myObj:any = {
doSomething: function () { console.log('doing something'); return 'doing something'; },
};
myArray:any;
constructor() { }
ngOnInit() {
this.myArray = [this.myObj];
}
You can use it in template html file as following:
<div>test-1: {{ myObj?.doSomething()}}</div>
<div>test-2: {{ myArray[0].doSomething()}}</div>
<div>test-3: {{ myArray[2]?.doSomething()}}</div>
Even your "long" list is pretty short. Also, did you choose them to match the actual data? Performance will vary with what these data actually look like. For example, you have a short list repeated over and over to make a longer list. This means that the quadratic solution is linear in your benchmarks, but not in reality.
For actually-large lists, the set code is your best bet—it's linear (although space-hungry). The sort and groupby methods are O(n log n) and the loop in method is obviously quadratic, so you know how these will scale as n gets really big. If this is the real size of the data you are analyzing, then who cares? It's tiny.
Incidentally, I'm seeing a noticeable speedup if I don't form an intermediate list to make the set, that is to say if I replace
kt = [tuple(i) for i in k]
skt = set(kt)
with
skt = set(tuple(i) for i in k)
The real solution may depend on more information: Are you sure that a list of lists is really the representation you need?
This is one of my favorite topics and the content here was just amazing. I was thinking if it would be worth while or effective to compare the methods available in Runtime vs. Mono. I hope I got my terms right, but I think you know what I mean. In order to have a somewhat better understanding of what each Runtime supports currently, would it make sense to compare the methods they provide? I realize implementations may vary, and I have not considered the Framework Class libraries or the slew of other libraries available in one environment vs. the other. I also realize someone might have already done this work even more efficiently. I would be most grateful if you would let me know so I can review it. I feel doing a diff between the outcome of such activity would be of value, and wanted to see how more experienced developers feel about it, and would they provide useful guidance. While back I was playing with reflection, and wrote some lines that traverse the .net directory, and list the assemblies.
@Override
public boolean equals(Object that){
if(this == that) return true;//if both of them points the same address in memory
if(!(that instanceof People)) return false; // if "that" is not a People or a childclass
People thatPeople = (People)that; // than we can cast it to People safely
return this.name.equals(thatPeople.name) && this.age == thatPeople.age;// if they have the same name and same age, then the 2 objects are equal unless they're pointing to different memory adresses
}
This result is the first that pops-up in google, and is more broad than what's happening here. The following will apply to an express server:
I was trying to access resources from a nested folder.
Inside index.html
i had
<script src="./script.js"></script>
The static route was mounted at :
app.use(express.static(__dirname));
But the script.js
is located in the nested folder as in: js/myStaticApp/script.js
I just changed the static route to:
app.use(express.static(path.join(__dirname, "js")));
Now it works :)
To uninstall it globally just run below command:
npm uninstall -g @angular/cli
Once it is done, clear your cache by running below command:
npm cache clean
Now, to install the latset version of Angular, just run:
npm install -g @angular/cli@latest
For details about Angular CLI, take a look at Angular introduction and CLI guide
Replace this:
var cat = $.jqURL.get('category');
var $dd = $('#cbCategory');
var $options = $('option', $dd);
$options.each(function() {
if ($(this).text() == cat)
$(this).select(); // This is where my problem is
});
With this:
$('#cbCategory').val(cat);
Calling val()
on a select list will automatically select the option with that value, if any.
In my case this error appeared out of blue. While staring at that mysterious error I've realized, that I was trying to run the command outside of vm...
This should work
background: url("youimage.png") no-repeat center center fixed;
-webkit-background-size: 100% auto;
-moz-background-size: 100% auto;
-o-background-size: 100% auto;
background-size: 100% auto;
Go through http://nodejs.org/api/fs.html
One important thing - you can use sync functions also. (It will work like C program)
You could throw the enum value and string into an STL map. Then you could use it like so.
return myStringMap[Enum::Apple];
The best way is checking out the changes.
Changing the file pom.xml in a project named project-name you can do it:
git status
# modified: project-name/pom.xml
git checkout project-name/pom.xml
git checkout master
# Checking out files: 100% (491/491), done.
# Branch master set up to track remote branch master from origin.
# Switched to a new branch 'master'
Open cmd type adb shell
then press enter.
Type ls
to view files list.
Note: I updated this answer based on comments and other answers, so comments prior to May 22nd 2020 may no longer apply. Also I noticed today that some IDE's like VS Code and PyCharm do not recognize a HEREDOC marker that contains spaces, whereas bash has no problem with it, so I'm updating this answer again.
Bash does not provide a builtin syntax for multi-line comment but there are hacks using existing bash syntax that "happen to work now".
Personally I think the simplest (ie least noisy, least weird, easiest to type, most explicit) is to use a quoted HEREDOC, but make it obvious what you are doing, and use the same HEREDOC marker everywhere:
<<'###BLOCK-COMMENT'
line 1
line 2
line 3
line 4
###BLOCK-COMMENT
Single-quoting the HEREDOC marker avoids some shell parsing side-effects, such as weird subsitutions that would cause crash or output, and even parsing of the marker itself. So the single-quotes give you more freedom on the open-close comment marker.
For example the following uses a triple hash which kind of suggests multi-line comment in bash. This would crash the script if the single quotes were absent. Even if you remove ###
, the FOO{}
would crash the script (or cause bad substitution to be printed if no set -e
) if it weren't for the single quotes:
set -e
<<'###BLOCK-COMMENT'
something something ${FOO{}} something
more comment
###BLOCK-COMMENT
ls
You could of course just use
set -e
<<'###'
something something ${FOO{}} something
more comment
###
ls
but the intent of this is definitely less clear to a reader unfamiliar with this trickery.
Note my original answer used '### BLOCK COMMENT'
, which is fine if you use vanilla vi/vim but today I noticed that PyCharm and VS Code don't recognize the closing marker if it has spaces.
Nowadays any good editor allows you to press ctrl-/ or similar, to un/comment the selection. Everyone definitely understands this:
# something something ${FOO{}} something
# more comment
# yet another line of comment
although admittedly, this is not nearly as convenient as the block comment above if you want to re-fill your paragraphs.
There are surely other techniques, but there doesn't seem to be a "conventional" way to do it. It would be nice if ###>
and ###<
could be added to bash to indicate start and end of comment block, seems like it could be pretty straightforward.
Use the double-star (aka double-splat?) operator:
func(**{'type':'Event'})
is equivalent to
func(type='Event')
use this
System.Configuration.ConfigurationSettings.AppSettings.Get("Keyname")
Another option is py-dom-xpath, it works seamlessly with minidom and is pure Python so works on appengine.
import xpath
xpath.find('//item', doc)
If you can use C#6 or higher, you can benefit from Interpolated Strings and rewrite @Ari Roth's solution like this:
C# 6 :
public static class ColorConverterExtensions
{
public static string ToHexString(this Color c) => $"#{c.R:X2}{c.G:X2}{c.B:X2}";
public static string ToRgbString(this Color c) => $"RGB({c.R}, {c.G}, {c.B})";
}
Also:
this
to use them as extensions methods.string
instead of the class name.From the spring docs
Spring can be easily integrated into any Java-based web framework. All you need to do is to declare the ContextLoaderListener in your web.xml and use a contextConfigLocation to set which context files to load.
The <context-param>
:
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>/WEB-INF/applicationContext*.xml</param-value>
</context-param>
<listener>
<listener-class>
org.springframework.web.context.ContextLoaderListener
</listener-class>
</listener>
You can then use the WebApplicationContext to get a handle on your beans.
WebApplicationContext ctx = WebApplicationContextUtils.getRequiredWebApplicationContext(servlet.getServletContext());
SomeBean someBean = (SomeBean) ctx.getBean("someBean");
See http://static.springsource.org/spring/docs/2.5.x/api/org/springframework/web/context/support/WebApplicationContextUtils.html for more info
I have Win7 Pro 64-bit on AMD cpu, no gpu. I was following the instructions under "Installing with native pip" at https://www.tensorflow.org/install/install_windows. The installation step went ok but the attempt to import tensorflow produced the infamous:
ImportError: No module named '_pywrap_tensorflow_internal'
This seems to be one of those situations where a lot of unrelated things can go wrong, depending on configuration, which all cascade through to the same error.
In my case, installing MSVCP140.DLL was the answer.
You have MSVCP140.DLL
already if
C:\Windows\System32\MSVCP140.DLL
, ANDC:\Windows\SysWOW64\MSVCP140.DLL
.I installed it manually, which was unnecessary (the redistributable is not the whole Visual C++ development mess and isn't large). Use the link posted earlier in this thread to install it: Visual C++ 2015 redistributable.
Also, I recommend that you override the default install directory for Python and put it anywhere not under C:\Program Files
, because Windows tries to write-protect files there, which causes problems later.
Python started as a scripting language for Linux like Perl but less cryptic. Now it is used for both web and desktop applications and is available on Windows too. Desktop GUI APIs like GTK have their Python implementations and Python based web frameworks like Django are preferred by many over PHP et al. for web applications.
And by the way,
If you have Java 7 so include the below following snippet within your app-level build.gradle
:
compileOptions {
sourceCompatibility JavaVersion.VERSION_1_7
targetCompatibility JavaVersion.VERSION_1_7
}
When I had this error, it was because I didn't have my class in a package. Put your HelloWorld.java
file in a "package" folder. You may have to create a new package folder:
Right click on the hello
folder and select "New" > "Package". Then give it a name (e.g: com.example) and move your HelloWorld.java
class into the package.