One significant difference between INNER JOIN and NATURAL JOIN is the number of columns returned.

Consider:

TableA                           TableB
+------------+----------+        +--------------------+    
|Column1     | Column2  |        |Column1  |  Column3 |
+-----------------------+        +--------------------+
| 1          |  2       |        | 1       |   3      |
+------------+----------+        +---------+----------+

The INNER JOIN of TableA and TableB on Column1 will return

SELECT * FROM TableA AS a INNER JOIN TableB AS b USING (Column1);
SELECT * FROM TableA AS a INNER JOIN TableB AS b ON a.Column1 = b.Column1;

+------------+-----------+---------------------+    
| a.Column1  | a.Column2 | b.Column1| b.Column3|
+------------------------+---------------------+
| 1          |  2        | 1        |   3      |
+------------+-----------+----------+----------+

The NATURAL JOIN of TableA and TableB on Column1 will return:

SELECT * FROM TableA NATURAL JOIN TableB
+------------+----------+----------+    
|Column1     | Column2  | Column3  |
+-----------------------+----------+
| 1          |  2       |   3      |
+------------+----------+----------+

The repeated column is avoided.

(AFAICT from the standard grammar, you can't specify the joining columns in a natural join; the join is strictly name-based. See also Wikipedia.)

(There's a cheat in the inner join output; the a. and b. parts would not be in the column names; you'd just have column1, column2, column1, column3 as the headings.)

'\r' means 'carriage return' and it is similar to '\n' which means 'line break' or more commonly 'new line'

in the old days of typewriters, you would have to move the carriage that writes back to the start of the line, and move the line down in order to write onto the next line.

in the modern computer era we still have this functionality for multiple reasons. but mostly we use only '\n' and automatically assume that we want to start writing from the start of the line, since it would not make much sense otherwise.

however, there are some times when we want to use JUST the '\r' and that would be if i want to write something to an output, and the instead of going down to a new line and writing something else, i want to write something over what i already wrote, this is how many programs in linux or in windows command line are able to have 'progress' information that changes on the same line.

nowadays most systems use only the '\n' to denote a newline. but some systems use both together.

you can see examples of this given in some of the other answers, but the most common are:

• windows ends lines with '\r\n'
• mac ends lines with '\r'
• unix/linux use '\n'

and some other programs also have specific uses for them.

for more information about the history of these characters

public class ReadFileUsingFileInputStream {

/**
* @param args
*/
static int ch;

public static void main(String[] args) {
    File file = new File("C://text.txt");
    StringBuffer stringBuffer = new StringBuffer("");
    try {
        FileInputStream fileInputStream = new FileInputStream(file);
        try {
            while((ch = fileInputStream.read())!= -1){
                stringBuffer.append((char)ch);  
            }
        }
        catch (IOException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
        }
    }
    catch (FileNotFoundException e) {
        // TODO Auto-generated catch block
        e.printStackTrace();
    }
    System.out.println("File contents :");
    System.out.println(stringBuffer);
    }
}

This link shows three different ways how to sum in java, there is one option that is not in previous answers using Apache Commons Math..

Example:

public static void main(String args []){
    List<Double> NUMBERS_FOR_SUM = new ArrayList<Double>(){
         {
            add(5D);
            add(3.2D);
            add(7D);
         }
    };
    double[] arrayToSume = ArrayUtils.toPrimitive(NUMBERS_FOR_SUM
            .toArray(new Double[NUMBERS_FOR_SUM.size()]));    
    System.out.println(StatUtils.sum(arrayToSume));

}

See StatUtils api

I'm posting my solution for the other sleep-deprived souls out there:

If you're using RVM, double-check that you're in the correct folder, using the correct ruby version and gemset. I had an array of terminal tabs open, and one of them was in a different directory. typing "rails console" produced the error because my default rails distro is 2.3.x.

I noticed the error on my part, cd'd to the correct directory, and my .rvmrc file did the rest.

RVM is not like Git. In git, changing branches in one shell changes it everywhere. It's literally rewriting the files in question. RVM, on the other hand, is just setting shell variables, and must be set for each new shell you open.

In case you're not familiar with .rvmrc, you can put a file with that name in any directory, and rvm will pick it up and use the version/gemset specified therein, whenever you change to that directory. Here's a sample .rvmrc file:

rvm use 1.9.2@turtles

This will switch to the latest version of ruby 1.9.2 in your RVM collection, using the gemset "turtles". Now you can open up a hundred tabs in Terminal (as I end up doing) and never worry about the ruby version it's pointing to.

If you have to do group by using hibernate criteria use projections.groupPropery like the following,

@Autowired
private SessionFactory sessionFactory;
Criteria crit = sessionFactory.getCurrentSession().createCriteria(studentModel.class);
crit.setProjection(Projections.projectionList()
            .add(Projections.groupProperty("studentName").as("name"))
List result = crit.setResultTransformer(Criteria.ALIAS_TO_ENTITY_MAP).list(); 
return result;  

I use this:

pip3 install -r  requirements.txt  

In SQL Server 2017 STRING_AGG is added:

SELECT t.name,STRING_AGG (c.name, ',') AS csv
FROM sys.tables t
JOIN sys.columns c on t.object_id = c.object_id
GROUP BY t.name
ORDER BY 1

Also, STRING_SPLIT is usefull for the opposite case and available in SQL Server 2016

Just this

passwd <<EOF
oldpassword
newpassword
newpassword
EOF

Actual output from ubuntu machine (sorry no AIX available to me):

user@host:~$ passwd <<EOF
oldpassword
newpassword
newpassword
EOF

Changing password for user.
(current) UNIX password: Enter new UNIX password: Retype new UNIX password: 
passwd: password updated successfully
user@host:~$

After reading several posts on this topic, testing different configurations and based on some insights from this mysql bug thread that's what I have understood:

• the server time zone is important in particular to convert dates stored in the database to the time zone of the application server. there are other implications but this is the most noticeable one
• GMT x UTC time zone systems. GMT was conceived in the late 19th century and can be shifted between standard time and summer time. this property could lead to a situation where the database server shifts to summer time and the application doesn't notice it (perhaps there are other complications but I didn't research further). UTC does not vary over time (it is always within about 1 second of mean solar time at 0° longitude).
• serverTimeZone definition was introduced in mysql jdbc connectors versions 5.1 ahead. until version 8 it could be ignored with useLegacyDatetimeCode=true , which in conjunction with useJDBCCompliantTimezoneShift=true would make the application get the database time zone on every connection. In this mode GMT time zones such as 'British Summer Time' would be converted to the internal java/JDBC format. New time zones could be defined in a .properties file such as this one
• Starting with jdbc driver version 8, automatic time matching (useJDBCCompliantTimezoneShift) and legacy time format (useLegacyDatetimeCode) were removed (see mysql jdbc connector changelog). therefore setting these 2 parameters has no effect as they are completely ignored (new default is useLegacyDateTimeCode=false)
• In this manner setting serverTimezone became mandatory if any of the time zones (application/database servers) are not in the format 'UTC+xx' or 'GMT+xx'
• There is no impact of setting server time as UTC (for instance with jdbc:mysql://localhost:3306/myschema?serverTimezone=UTC, even if your application / database servers are not in this timezone. The important is for the application connection string + database to be synchronized with the same time zone. In different words, simply setting serverTimezone=UTC with a different time zone on the database server will shift any dates extracted from the database
• The MySQL default time zone can be set to UTC+0 with the my.ini or my.cnf files (windows / linux respectively) by adding the line default-time-zone='+00:00' (details in this StackOverflow post)
• Databases configured on AWS (amazon web services) are automatically assigned UTC+0 default time (see AWS help page here)

curl sends POST requests with the default content type of application/x-www-form-urlencoded. If you want to send a JSON request, you will have to specify the correct content type header:

$ curl -vX POST http://server/api/v1/places.json -d @testplace.json \
--header "Content-Type: application/json"

But that will only work if the server accepts json input. The .json at the end of the url may only indicate that the output is json, it doesn't necessarily mean that it also will handle json input. The API documentation should give you a hint on whether it does or not.

The reason you get a 401 and not some other error is probably because the server can't extract the auth_token from your request.

if (combo1.SelectedIndex > -1)
{
    // do something
}

if any item is selected selected index will be greater than -1

I had this error come up today due to a defect in code that was posting back a tremendous amount of times causing IIS to be flooded with requests. This essentially locked up IIS and so when I tried to debug, it 'timed out' trying to start the debugger. I simply restarted IIS, which took a few minutes, and it solved the issue.

I sure do wish this error was less generic, seems like there are several different ways to produce it.

You simply can find a matrix dimension by using Numpy:

import numpy as np

x = np.arange(24).reshape((6, 4))
x.ndim

output will be:

2

It means this matrix is a 2 dimensional matrix.

x.shape

Will show you the size of each dimension. The shape for x is equal to:

(6, 4)

Personally more than anything I would change the logic, or look at the business rules to see if they dictate any potential naming.

Since, the actual condition that toggles the boolean is actually the act of being "last". I would say that switching the logic, and naming it "IsLastItem" or similar would be a more preferred method.

layout_weight tells Android how to distribute your Views in a LinearLayout. Android then first calculates the total proportion required for all Views that have a weight specified and places each View according to what fraction of the screen it has specified it needs. In the following example, Android sees that the TextViews have a layout_weight of 0 (this is the default) and the EditTexts have a layout_weight of 2 each, while the Button has a weight of 1. So Android allocates 'just enough' space to display tvUsername and tvPassword and then divides the remainder of the screen width into 5 equal parts, two of which are allocated to etUsername, two to etPassword and the last part to bLogin:

<LinearLayout android:orientation="horizontal" ...>

    <TextView android:id="@+id/tvUsername" 
    android:text="Username" 
    android:layout_width="wrap_content" ... />

    <EditText android:id="@+id/etUsername"
    android:layout_width="0dp"
    android:layout_weight="2" ... />

    <TextView android:id="@+id/tvPassword"
    android:text="Password"
    android:layout_width="wrap_content" />

    <EditText android:id="@+id/etPassword"
    android:layout_width="0dp"
    android:layout_weight="2" ... />

    <Button android:id="@+id/bLogin"
    android:layout_width="0dp"
    android:layout_weight="1"
    android:text="Login"... />

</LinearLayout>

It looks like:
and

Since XAMPP went through some modifications, the file is now at xampp/php/php.ini.

Just put this in the header of your PHP Page and it ill work without API:

header('Access-Control-Allow-Origin: *'); //allow everybody  

or

header('Access-Control-Allow-Origin: http://codesheet.org'); //allow just one domain 

or

$http_origin = $_SERVER['HTTP_ORIGIN'];  //allow multiple domains

$allowed_domains = array(
  'http://codesheet.org',
  'http://stackoverflow.com'
);

if (in_array($http_origin, $allowed_domains))
{  
    header("Access-Control-Allow-Origin: $http_origin");
}

The method you want is toInt() -- you have to be a little careful, since the toInt() returns an optional Int.

let stringNumber = "1234"
let numberFromString = stringNumber.toInt()
// numberFromString is of type Int? with value 1234

let notANumber = "Uh oh"
let wontBeANumber = notANumber.toInt()
// wontBeANumber is of type Int? with value nil

You can use margin-top: -50% to move the text all the way to the top of the div.

margin-top: -50%;

tr.rowhighlight td, tr.rowhighlight th{
    background-color:#f0f8ff;
}

The problem with the solutions provided is that you can only upload 1 file ever. In my case I needed to upload only 1 file at a time (on click or on drop).

This was my solution..

    Dropzone.options.myDropzone = {
        maxFiles: 2,
        init: function() {
            this.handleFiles = function(files) {
                var file, _i, _len, _results;
                _results = [];
                for (_i = 0, _len = files.length; _i < _len; _i++) {
                    file = files[_i];
                    _results.push(this.addFile(file));
                    // Make sure we don't handle more files than requested
                    if (this.options.maxFiles != null && this.options.maxFiles > 0 && _i >= (this.options.maxFiles - 1)) {
                        break;
                    }
                }
                return _results;
            };
            this._addFilesFromItems = function(items) {
                var entry, item, _i, _len, _results;
                _results = [];
                for (_i = 0, _len = items.length; _i < _len; _i++) {
                    item = items[_i];
                    if ((item.webkitGetAsEntry != null) && (entry = item.webkitGetAsEntry())) {
                        if (entry.isFile) {
                            _results.push(this.addFile(item.getAsFile()));
                        } else if (entry.isDirectory) {
                            _results.push(this._addFilesFromDirectory(entry, entry.name));
                        } else {
                            _results.push(void 0);
                        }
                    } else if (item.getAsFile != null) {
                        if ((item.kind == null) || item.kind === "file") {
                            _results.push(this.addFile(item.getAsFile()));
                        } else {
                            _results.push(void 0);
                        }
                    } else {
                        _results.push(void 0);
                    }
                    // Make sure we don't handle more files than requested
                    if (this.options.maxFiles != null && this.options.maxFiles > 0 && _i >= (this.options.maxFiles - 1)) {
                        break;
                    }
                }
                return _results;
            };
        }
    };

Hope this helps ;)

You can float your column divs using float: left; and give them widths.

And to make sure none of your other content gets messed up, you can wrap the floated divs within a parent div and give it some clear float styling.

Hope this helps.

var currentDate = moment('2015-10-30');
var futureMonth = moment(currentDate).add(1, 'M');
var futureMonthEnd = moment(futureMonth).endOf('month');

if(currentDate.date() != futureMonth.date() && futureMonth.isSame(futureMonthEnd.format('YYYY-MM-DD'))) {
    futureMonth = futureMonth.add(1, 'd');
}

console.log(currentDate);
console.log(futureMonth);

DEMO

EDIT

moment.addRealMonth = function addRealMonth(d) {
  var fm = moment(d).add(1, 'M');
  var fmEnd = moment(fm).endOf('month');
  return d.date() != fm.date() && fm.isSame(fmEnd.format('YYYY-MM-DD')) ? fm.add(1, 'd') : fm;  
}

var nextMonth = moment.addRealMonth(moment());

DEMO

Update : for the new apache 2.4 jump directly to the end.

The Order keyword and its relation with Deny and Allow Directives is a real nightmare. It would be quite interesting to understand how we ended up with such solution, a non-intuitive one to say the least.

• The first important point is that the Order keyword will have a big impact on how Allow and Deny directives are used.
• Secondly, Deny and Allow directives are not applied in the order they are written, they must be seen as two distinct blocks (one the for Deny directives, one for Allow).
• Thirdly, they are drastically not like firewall rules: all rules are applied, the process is not stopping at the first match.

You have two main modes:

The Order-Deny-Allow-mode, or Allow-anyone-except-this-list-or-maybe-not

Order Deny,Allow

• This is an allow by default mode. You optionally specify Deny rules.
• Firstly, the Deny rules reject some requests.
• If someone gets rejected you can get them back with an Allow.

I would rephrase it as:

Rule Deny
     list of Deny rules
Except
     list of Allow rules
Policy Allow (when no rule fired)

The Order-Allow-Deny-mode, or Reject-everyone-except-this-list-or-maybe-not

Order Allow,Deny

• This is a deny by default mode. So you usually specify Allow rules.
• Firstly, someone's request must match at least one Allow rule.
• If someone matched an Allow, you can still reject them with a Deny.

In the simplified form:

Rule Allow
     list of Allow rules
Except
     list of Deny rules
Policy Deny (when no rule fired)

Back to your case

You need to allow a list of networks which are the country networks. And in this country you want to exclude some proxies' IP addresses.

You have taken the allow-anyone-except-this-list-or-maybe-not mode, so by default anyone can access your server, except proxies' IPs listed in the Deny list, but if they get rejected you still allow the country networks. That's too broad. Not good.

By inverting to order allow,deny you will be in the reject-everyone-except-this-list-or-maybe-not mode. So you will reject access to everyone but allow the country networks and then you will reject the proxies. And of course you must remove the Deny from all as stated by @Gerben and @Michael Slade (this answer only explains what they wrote).

The Deny from all is usually seen with order deny,allow to remove the allow by default access and make a simple, readable configuration. For example, specify a list of allowed IPs after that. You don't need that rule and your question is a perfect case of a 3-way access mode (default policy, exceptions, exceptions to exceptions).

But the guys who designed these settings are certainly insane.

All this is deprecated with Apache 2.4

The whole authorization scheme has been refactored in Apache 2.4 with RequireAll, RequireAny and RequireNone directives. See for example this complex logic example.

So the old strange Order logic becomes a relic, and to quote the new documentation:

Controling how and in what order authorization will be applied has been a bit of a mystery in the past

The OP (in the April 2012 updated revision of the question) is interested in knowing if there's a way to add to a list in amortized constant time, such as can be done, for example, with a C++ vector<> container. The best answer(s?) here so far only show the relative execution times for various solutions given a fixed-size problem, but do not address any of the various solutions' algorithmic efficiency directly. Comments below many of the answers discuss the algorithmic efficiency of some of the solutions, but in every case to date (as of April 2015) they come to the wrong conclusion.

Algorithmic efficiency captures the growth characteristics, either in time (execution time) or space (amount of memory consumed) as a problem size grows. Running a performance test for various solutions given a fixed-size problem does not address the various solutions' growth rate. The OP is interested in knowing if there is a way to append objects to an R list in "amortized constant time". What does that mean? To explain, first let me describe "constant time":

• Constant or O(1) growth:

  If the time required to perform a given task remains the same as the size of the problem doubles, then we say the algorithm exhibits constant time growth, or stated in "Big O" notation, exhibits O(1) time growth. When the OP says "amortized" constant time, he simply means "in the long run"... i.e., if performing a single operation occasionally takes much longer than normal (e.g. if a preallocated buffer is exhausted and occasionally requires resizing to a larger buffer size), as long as the long-term average performance is constant time, we'll still call it O(1).

  For comparison, I will also describe "linear time" and "quadratic time":

• Linear or O(n) growth:

  If the time required to perform a given task doubles as the size of the problem doubles, then we say the algorithm exhibits linear time, or O(n) growth.

• Quadratic or O(n²) growth:

  If the time required to perform a given task increases by the square of the problem size, them we say the algorithm exhibits quadratic time, or O(n²) growth.

There are many other efficiency classes of algorithms; I defer to the Wikipedia article for further discussion.

I thank @CronAcronis for his answer, as I am new to R and it was nice to have a fully-constructed block of code for doing a performance analysis of the various solutions presented on this page. I am borrowing his code for my analysis, which I duplicate (wrapped in a function) below:

library(microbenchmark)
### Using environment as a container
lPtrAppend <- function(lstptr, lab, obj) {lstptr[[deparse(substitute(lab))]] <- obj}
### Store list inside new environment
envAppendList <- function(lstptr, obj) {lstptr$list[[length(lstptr$list)+1]] <- obj} 
runBenchmark <- function(n) {
    microbenchmark(times = 5,  
        env_with_list_ = {
            listptr <- new.env(parent=globalenv())
            listptr$list <- NULL
            for(i in 1:n) {envAppendList(listptr, i)}
            listptr$list
        },
        c_ = {
            a <- list(0)
            for(i in 1:n) {a = c(a, list(i))}
        },
        list_ = {
            a <- list(0)
            for(i in 1:n) {a <- list(a, list(i))}
        },
        by_index = {
            a <- list(0)
            for(i in 1:n) {a[length(a) + 1] <- i}
            a
        },
        append_ = { 
            a <- list(0)    
            for(i in 1:n) {a <- append(a, i)} 
            a
        },
        env_as_container_ = {
            listptr <- new.env(parent=globalenv())
            for(i in 1:n) {lPtrAppend(listptr, i, i)} 
            listptr
        }   
    )
}

The results posted by @CronAcronis definitely seem to suggest that the a <- list(a, list(i)) method is fastest, at least for a problem size of 10000, but the results for a single problem size do not address the growth of the solution. For that, we need to run a minimum of two profiling tests, with differing problem sizes:

> runBenchmark(2e+3)
Unit: microseconds
              expr       min        lq      mean    median       uq       max neval
    env_with_list_  8712.146  9138.250 10185.533 10257.678 10761.33 12058.264     5
                c_ 13407.657 13413.739 13620.976 13605.696 13790.05 13887.738     5
             list_   854.110   913.407  1064.463   914.167  1301.50  1339.132     5
          by_index 11656.866 11705.140 12182.104 11997.446 12741.70 12809.363     5
           append_ 15986.712 16817.635 17409.391 17458.502 17480.55 19303.560     5
 env_as_container_ 19777.559 20401.702 20589.856 20606.961 20939.56 21223.502     5
> runBenchmark(2e+4)
Unit: milliseconds
              expr         min         lq        mean    median          uq         max neval
    env_with_list_  534.955014  550.57150  550.329366  553.5288  553.955246  558.636313     5
                c_ 1448.014870 1536.78905 1527.104276 1545.6449 1546.462877 1558.609706     5
             list_    8.746356    8.79615    9.162577    8.8315    9.601226    9.837655     5
          by_index  953.989076 1038.47864 1037.859367 1064.3942 1065.291678 1067.143200     5
           append_ 1634.151839 1682.94746 1681.948374 1689.7598 1696.198890 1706.683874     5
 env_as_container_  204.134468  205.35348  208.011525  206.4490  208.279580  215.841129     5
> 

First of all, a word about the min/lq/mean/median/uq/max values: Since we are performing the exact same task for each of 5 runs, in an ideal world, we could expect that it would take exactly the same amount of time for each run. But the first run is normally biased toward longer times due to the fact that the code we are testing is not yet loaded into the CPU's cache. Following the first run, we would expect the times to be fairly consistent, but occasionally our code may be evicted from the cache due to timer tick interrupts or other hardware interrupts that are unrelated to the code we are testing. By testing the code snippets 5 times, we are allowing the code to be loaded into the cache during the first run and then giving each snippet 4 chances to run to completion without interference from outside events. For this reason, and because we are really running the exact same code under the exact same input conditions each time, we will consider only the 'min' times to be sufficient for the best comparison between the various code options.

Note that I chose to first run with a problem size of 2000 and then 20000, so my problem size increased by a factor of 10 from the first run to the second.

Performance of the list solution: O(1) (constant time)

Let's first look at the growth of the list solution, since we can tell right away that it's the fastest solution in both profiling runs: In the first run, it took 854 microseconds (0.854 milliseconds) to perform 2000 "append" tasks. In the second run, it took 8.746 milliseconds to perform 20000 "append" tasks. A naïve observer would say, "Ah, the list solution exhibits O(n) growth, since as the problem size grew by a factor of ten, so did the time required to execute the test." The problem with that analysis is that what the OP wants is the growth rate of a single object insertion, not the growth rate of the overall problem. Knowing that, it's clear then that the list solution provides exactly what the OP wants: a method of appending objects to a list in O(1) time.

Performance of the other solutions

None of the other solutions come even close to the speed of the list solution, but it is informative to examine them anyway:

Most of the other solutions appear to be O(n) in performance. For example, the by_index solution, a very popular solution based on the frequency with which I find it in other SO posts, took 11.6 milliseconds to append 2000 objects, and 953 milliseconds to append ten times that many objects. The overall problem's time grew by a factor of 100, so a naïve observer might say "Ah, the by_index solution exhibits O(n²) growth, since as the problem size grew by a factor of ten, the time required to execute the test grew by a factor of 100." As before, this analysis is flawed, since the OP is interested in the growth of a single object insertion. If we divide the overall time growth by the problem's size growth, we find that the time growth of appending objects increased by a factor of only 10, not a factor of 100, which matches the growth of the problem size, so the by_index solution is O(n). There are no solutions listed which exhibit O(n²) growth for appending a single object.

If you dont want to change the format of date and time from the timestamp, you can use the explode function in php

$timestamp = "2012-04-02 02:57:54"
$datetime = explode(" ",$timestamp);
$date = $datetime[0];
$time = $datetime[1];

From my HomeController I want to call this Method and convert Json response to List

No you don't. You really don't want to add the overhead of an HTTP call and (de)serialization when the code is within reach. It's even in the same assembly!

Your ApiController goes against (my preferred) convention anyway. Let it return a concrete type:

public IEnumerable<QDocumentRecord> GetAllRecords()
{
    listOfFiles = ...
    return listOfFiles;
}

If you don't want that and you're absolutely sure you need to return HttpResponseMessage, then still there's absolutely no need to bother with calling JsonConvert.SerializeObject() yourself:

return Request.CreateResponse<List<QDocumentRecord>>(HttpStatusCode.OK, listOfFiles);

Then again, you don't want business logic in a controller, so you extract that into a class that does the work for you:

public class FileListGetter
{
    public IEnumerable<QDocumentRecord> GetAllRecords()
    {
        listOfFiles = ...
        return listOfFiles;
    }
}

Either way, then you can call this class or the ApiController directly from your MVC controller:

public class HomeController : Controller
{
    public ActionResult Index()
    {
        var listOfFiles = new DocumentsController().GetAllRecords();
        // OR
        var listOfFiles = new FileListGetter().GetAllRecords();

        return View(listOfFiles);
    }
}

But if you really, really must do an HTTP request, you can use HttpWebRequest, WebClient, HttpClient or RestSharp, for all of which plenty of tutorials exist.

I use Octave, but Matlab has the same syntax.

Create 3d matrix:

octave:3> m = ones(2,3,2)
m =

ans(:,:,1) =

   1   1   1
   1   1   1

ans(:,:,2) =

   1   1   1
   1   1   1

Now, say I have a 2D matrix that I want to expand in a new dimension:

octave:4> Two_D = ones(2,3)
Two_D =
   1   1   1
   1   1   1

I can expand it by creating a 3D matrix, setting the first 2D in it to my old (here I have size two of the third dimension):

octave:11> Three_D = zeros(2,3,2)
Three_D =

ans(:,:,1) =

   0   0   0
   0   0   0

ans(:,:,2) =

   0   0   0
   0   0   0



octave:12> Three_D(:,:,1) = Two_D
Three_D =

ans(:,:,1) =

   1   1   1
   1   1   1

ans(:,:,2) =

   0   0   0
   0   0   0

If you're using github you can use the website for this:

github.com/url/to/your/repo/compare/SHA_of_tip_of_one_branch...SHA_of_tip_of_another_branch

That will show you a compare of the two.

you need to mark your directory as source root (right click on the parent directory)

and then compile the plugin (it is important )

as result you will be able to add classes and more

In case you have smaller data set, a way to achieve it by GUI is:

1. Open a query window
2. SELECT * FROM [table_name]
3. Select Import from the menu bar
4. Press Apply on the bottom right below the Result Grid

Reference: http://www.youtube.com/watch?v=tnhJa_zYNVY

View

1. View objects are the basic building blocks of User Interface(UI) elements in Android.
2. View is a simple rectangle box which responds to the user's actions.
3. Examples are EditText, Button, CheckBox etc..
4. View refers to the android.view.View class, which is the base class of all UI classes.

ViewGroup

1. ViewGroup is the invisible container. It holds View and ViewGroup
2. For example, LinearLayout is the ViewGroup that contains Button(View), and other Layouts also.
3. ViewGroup is the base class for Layouts.

If you are working with Web application you can try this.

StringBuilder sb = new StringBuilder();
sb.AppendLine("Some text with line one");
sb.AppendLine("Some mpre text with line two");
MyLabel.Text = sb.ToString().Replace(Environment.NewLine, "<br />")

Additionally, if you want to set multiple variables at once by one query, you can use the other syntax for setting variables which goes like this: SELECT @varname:=value.

A practical example:

SELECT @total_count:=COUNT(*), @total_price:=SUM(quantity*price) FROM items ...

You need to be at MySQL version 5.6.4 or later to declare columns with fractional-second time datatypes. Not sure you have the right version? Try SELECT NOW(3). If you get an error, you don't have the right version.

For example, DATETIME(3) will give you millisecond resolution in your timestamps, and TIMESTAMP(6) will give you microsecond resolution on a *nix-style timestamp.

Read this: https://dev.mysql.com/doc/refman/8.0/en/fractional-seconds.html

NOW(3) will give you the present time from your MySQL server's operating system with millisecond precision.

If you have a number of milliseconds since the Unix epoch, try this to get a DATETIME(3) value

FROM_UNIXTIME(ms * 0.001)

Javascript timestamps, for example, are represented in milliseconds since the Unix epoch.

(Notice that MySQL internal fractional arithmetic, like * 0.001, is always handled as IEEE754 double precision floating point, so it's unlikely you'll lose precision before the Sun becomes a white dwarf star.)

If you're using an older version of MySQL and you need subsecond time precision, your best path is to upgrade. Anything else will force you into doing messy workarounds.

If, for some reason you can't upgrade, you could consider using BIGINT or DOUBLE columns to store Javascript timestamps as if they were numbers. FROM_UNIXTIME(col * 0.001) will still work OK. If you need the current time to store in such a column, you could use UNIX_TIMESTAMP() * 1000

You can do it using jQuery. Example:

<script src="https://code.jquery.com/jquery-1.11.2.min.js"></script>

<script>
    $.ajax({
        url : "next.php",
        type: "POST",
        data : "name=Denniss",
        success: function(data)
        {
            //data - response from server
            $('#response_div').html(data);
        }
    });
</script>

This is a hibernate.cfg.xml for posgresql and it will help you with basic hibernate configurations for posgresql.

<!DOCTYPE hibernate-configuration PUBLIC
        "-//Hibernate/Hibernate Configuration DTD 3.0//EN"
        "http://www.hibernate.org/dtd/hibernate-configuration-3.0.dtd">

<hibernate-configuration>
    <session-factory>
        <property name="hibernate.dialect">org.hibernate.dialect.PostgreSQLDialect</property>
        <property name="hibernate.connection.driver_class">org.postgresql.Driver</property>
        <property name="hibernate.connection.username">postgres</property>
        <property name="hibernate.connection.password">password</property>
        <property name="hibernate.connection.url">jdbc:postgresql://localhost:5432/hibernatedb</property>



        <property name="connection_pool_size">1</property>

        <property name="hbm2ddl.auto">create</property>

        <property name="show_sql">true</property>



       <mapping class="org.javabrains.sanjaya.dto.UserDetails"/>

    </session-factory>
</hibernate-configuration>

In CMake you could use find_package to find libraries you need. There usually is a FindBoost.cmake along with your CMake installation.

As far as I remember, it will be installed to /usr/share/cmake/Modules/ along with other find-scripts for common libraries. You could just check the documentation in that file for more information about how it works.

An example out of my head:

FIND_PACKAGE( Boost 1.40 COMPONENTS program_options REQUIRED )
INCLUDE_DIRECTORIES( ${Boost_INCLUDE_DIR} )

ADD_EXECUTABLE( anyExecutable myMain.cpp )

TARGET_LINK_LIBRARIES( anyExecutable LINK_PUBLIC ${Boost_LIBRARIES} )

I hope this code helps.

• Here's the official documentation about FindBoost.cmake.
• And the actual FindBoost.cmake (hosted on GitHub)

That example is pretty vague, but maybe something like this?

items = ['a', 'b', 'c', 'd', 'e', 'f', 'g', 'h']
items[3:6] = [''.join(items[3:6])]

It basically does a splice (or assignment to a slice) operation. It removes items 3 to 6 and inserts a new list in their place (in this case a list with one item, which is the concatenation of the three items that were removed.)

For any type of list, you could do this (using the + operator on all items no matter what their type is):

items = ['a', 'b', 'c', 'd', 'e', 'f', 'g', 'h']
items[3:6] = [reduce(lambda x, y: x + y, items[3:6])]

This makes use of the reduce function with a lambda function that basically adds the items together using the + operator.

Many devices with different screen sizes/ratios/resolutions have come out even in the last five years, including new types of iPhones and iPads. It would be very difficult to customize a website for each device.

Meanwhile, media queries for device-width, device-height, and device-aspect-ratio have been deprecated, so they may not work in future browser versions. (Source: MDN)

TLDR: Design based on browser widths, not devices. Here's a good introduction to this topic.

INSERT INTO table1 (col1, col2)
SELECT "a string", 5, TheNameOfTheFieldInTable2
FROM table2 where ...

Getting the alphabetical value from an int can be simply done with:

(char)('@' + i)

If you want emulate enum of C/C++ (base num and nexts incrementals):

enum ids {
    OPEN, CLOSE;
    //
    private static final int BASE_ORDINAL = 100;
    public int getCode() {
        return ordinal() + BASE_ORDINAL;
    }
};

public class TestEnum {
    public static void main (String... args){
        for (ids i : new ids[] { ids.OPEN, ids.CLOSE }) {
            System.out.println(i.toString() + " " + 
                i.ordinal() + " " + 
                i.getCode());
        }
    }
}

OPEN 0 100
CLOSE 1 101

If you are using jupyter notebook Try:

!python --version

If you are using terminal Try:

 python --version

My Final Approach:

    public void PutObject(string postUrl, object payload)
        {
            var request = (HttpWebRequest)WebRequest.Create(postUrl);
            request.Method = "PUT";
            request.ContentType = "application/xml";
            if (payload !=null)
            {
                request.ContentLength = Size(payload);
                Stream dataStream = request.GetRequestStream();
                Serialize(dataStream,payload);
                dataStream.Close();
            }

            HttpWebResponse response = (HttpWebResponse)request.GetResponse();
            string returnString = response.StatusCode.ToString();
        }

public void Serialize(Stream output, object input)
            {
                var ser = new DataContractSerializer(input.GetType());
                ser.WriteObject(output, input);
            }

Here is the correct implementation using numpy (np.log() is the natural logarithm)

import numpy as np
p = 100
r = 0.06 / 12
FV = 4000

n = np.log(1 + FV * r/ p) / np.log(1 + r)

print ("Number of periods = " + str(n))

Output:

Number of periods = 36.55539635919235

double totalMinutes = (end-start).TotalMinutes;

For that use Shallow Clone command git clone --depth 1 URL - It will clones only the current HEAD of the repository

ClassLoader.getResourceAsStream and Class.getResourceAsStream are definitely the way to go for loading the resource data. However, I don't believe there's any way of "listing" the contents of an element of the classpath.

In some cases this may be simply impossible - for instance, a ClassLoader could generate data on the fly, based on what resource name it's asked for. If you look at the ClassLoader API (which is basically what the classpath mechanism works through) you'll see there isn't anything to do what you want.

If you know you've actually got a jar file, you could load that with ZipInputStream to find out what's available. It will mean you'll have different code for directories and jar files though.

One alternative, if the files are created separately first, is to include a sort of manifest file containing the list of available resources. Bundle that in the jar file or include it in the file system as a file, and load it before offering the user a choice of resources.

Instead of using onSaveInstanceState and onRestoreInstanceState, you can also use a ViewModel. Make your data model extend ViewModel, and then you can use ViewModelProviders to get the same instance of your model every time the Activity is recreated:

class MyData extends ViewModel {
    // have all your properties with getters and setters here
}

public class MyActivity extends FragmentActivity {
    @Override
    public void onCreate(Bundle savedInstanceState) {

        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        // the first time, ViewModelProvider will create a new MyData
        // object. When the Activity is recreated (e.g. because the screen
        // is rotated), ViewModelProvider will give you the initial MyData
        // object back, without creating a new one, so all your property
        // values are retained from the previous view.
        myData = ViewModelProviders.of(this).get(MyData.class);

        ...
    }
}

To use ViewModelProviders, add the following to dependencies in app/build.gradle:

implementation "android.arch.lifecycle:extensions:1.1.1"
implementation "android.arch.lifecycle:viewmodel:1.1.1"

Note that your MyActivity extends FragmentActivity instead of just extending Activity.

You can read more about ViewModels here:

• Android Developer Guide, Handle configuration changes
• Android Developer Guide, Saving UI States, Use ViewModel to handle configuration changes
• Tutorial ViewModels : A Simple Example

I did a local install of WordPress on Ubuntu 14.04 following the steps outlined here and simply running:

sudo chown -R www-data:www-data {path_to_your_project_directory}

solved my issue with downloading plugins. The only reason I'm leaving this post here is because when I googled my issue, this was one of the first results and it led me to the solution to my problem.

Hope this one helps to anyone!

Make at least one of them float, then it will be float division, not integer:

>>> (20.0-10) / (100-10)
0.1111111111111111

Casting the result to float is too late.

Make sure that you run the SQL Server Configuration Manager snap-in as Administrator if UAC is enabled. Then right click the service and then click properties, change the start mode to enabled, then start it.

Under Python 3.x, you can do this nicely:

>>> head, *tail = [1, 1, 2, 3, 5, 8, 13, 21, 34, 55]
>>> head
1
>>> tail
[1, 2, 3, 5, 8, 13, 21, 34, 55]

A new feature in 3.x is to use the * operator in unpacking, to mean any extra values. It is described in PEP 3132 - Extended Iterable Unpacking. This also has the advantage of working on any iterable, not just sequences.

It's also really readable.

As described in the PEP, if you want to do the equivalent under 2.x (without potentially making a temporary list), you have to do this:

it = iter(iterable)
head, tail = next(it), list(it)

As noted in the comments, this also provides an opportunity to get a default value for head rather than throwing an exception. If you want this behaviour, next() takes an optional second argument with a default value, so next(it, None) would give you None if there was no head element.

Naturally, if you are working on a list, the easiest way without the 3.x syntax is:

head, tail = seq[0], seq[1:]

SELECT sc.name +'.'+ ta.name TableName
 ,SUM(pa.rows) RowCnt
 FROM sys.tables ta
 INNER JOIN sys.partitions pa
 ON pa.OBJECT_ID = ta.OBJECT_ID
 INNER JOIN sys.schemas sc
 ON ta.schema_id = sc.schema_id
 WHERE ta.is_ms_shipped = 0 AND pa.index_id IN (1,0)
 GROUP BY sc.name,ta.name
 ORDER BY SUM(pa.rows) DESC

See this:

• SQL SERVER – Find Row Count in Table – Find Largest Table in Database.

Extending the answer already provided by Phil. Adding parallelism to it is a no brainer in bash if you use xargs for the call.

Here the code:

xargs -n1 -P 10 curl -o /dev/null --silent --head --write-out '%{url_effective}: %{http_code}\n' < url.lst

-n1: use just one value (from the list) as argument to the curl call

-P10: Keep 10 curl processes alive at any time (i.e. 10 parallel connections)

Check the write_out parameter in the manual of curl for more data you can extract using it (times, etc).

In case it helps someone this is the call I'm currently using:

xargs -n1 -P 10 curl -o /dev/null --silent --head --write-out '%{url_effective};%{http_code};%{time_total};%{time_namelookup};%{time_connect};%{size_download};%{speed_download}\n' < url.lst | tee results.csv

It just outputs a bunch of data into a csv file that can be imported into any office tool.

you are using onclick which is javascript event. there is two ways

Javascript

<input type="button" value="Home" class="homebutton" id="btnHome" 
onClick="window.location = 'http://google.com'" />

Or PHP

create another page as redirect.php and put

<?php header('location : google.com') ?>

and insert this link on any page within the same directory

<a href="redirect.php">google<a/>

hope this helps its simplest!!

Here I am posting you the some code example which record good quality of sound using AudioRecord API.

Note: If you use in emulator the sound quality will not much good because we are using sample rate 8k which only supports in emulator. In device use sample rate to 44.1k for better quality.

public class Audio_Record extends Activity {
    private static final int RECORDER_SAMPLERATE = 8000;
    private static final int RECORDER_CHANNELS = AudioFormat.CHANNEL_IN_MONO;
    private static final int RECORDER_AUDIO_ENCODING = AudioFormat.ENCODING_PCM_16BIT;
    private AudioRecord recorder = null;
    private Thread recordingThread = null;
    private boolean isRecording = false;

    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.main);

        setButtonHandlers();
        enableButtons(false);

        int bufferSize = AudioRecord.getMinBufferSize(RECORDER_SAMPLERATE,
                RECORDER_CHANNELS, RECORDER_AUDIO_ENCODING); 
    }

    private void setButtonHandlers() {
        ((Button) findViewById(R.id.btnStart)).setOnClickListener(btnClick);
        ((Button) findViewById(R.id.btnStop)).setOnClickListener(btnClick);
    }

    private void enableButton(int id, boolean isEnable) {
        ((Button) findViewById(id)).setEnabled(isEnable);
    }

    private void enableButtons(boolean isRecording) {
        enableButton(R.id.btnStart, !isRecording);
        enableButton(R.id.btnStop, isRecording);
    }

    int BufferElements2Rec = 1024; // want to play 2048 (2K) since 2 bytes we use only 1024
    int BytesPerElement = 2; // 2 bytes in 16bit format

    private void startRecording() {

        recorder = new AudioRecord(MediaRecorder.AudioSource.MIC,
                RECORDER_SAMPLERATE, RECORDER_CHANNELS,
                RECORDER_AUDIO_ENCODING, BufferElements2Rec * BytesPerElement);

        recorder.startRecording();
        isRecording = true;
        recordingThread = new Thread(new Runnable() {
            public void run() {
                writeAudioDataToFile();
            }
        }, "AudioRecorder Thread");
        recordingThread.start();
    }

        //convert short to byte
    private byte[] short2byte(short[] sData) {
        int shortArrsize = sData.length;
        byte[] bytes = new byte[shortArrsize * 2];
        for (int i = 0; i < shortArrsize; i++) {
            bytes[i * 2] = (byte) (sData[i] & 0x00FF);
            bytes[(i * 2) + 1] = (byte) (sData[i] >> 8);
            sData[i] = 0;
        }
        return bytes;

    }

    private void writeAudioDataToFile() {
        // Write the output audio in byte

        String filePath = "/sdcard/voice8K16bitmono.pcm";
        short sData[] = new short[BufferElements2Rec];

        FileOutputStream os = null;
        try {
            os = new FileOutputStream(filePath);
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        }

        while (isRecording) {
            // gets the voice output from microphone to byte format

            recorder.read(sData, 0, BufferElements2Rec);
            System.out.println("Short writing to file" + sData.toString());
            try {
                // // writes the data to file from buffer
                // // stores the voice buffer
                byte bData[] = short2byte(sData);
                os.write(bData, 0, BufferElements2Rec * BytesPerElement);
            } catch (IOException e) {
                e.printStackTrace();
            }
        }
        try {
            os.close();
        } catch (IOException e) {
            e.printStackTrace();
        }
    }

    private void stopRecording() {
        // stops the recording activity
        if (null != recorder) {
            isRecording = false;
            recorder.stop();
            recorder.release();
            recorder = null;
            recordingThread = null;
        }
    }

    private View.OnClickListener btnClick = new View.OnClickListener() {
        public void onClick(View v) {
            switch (v.getId()) {
            case R.id.btnStart: {
                enableButtons(true);
                startRecording();
                break;
            }
            case R.id.btnStop: {
                enableButtons(false);
                stopRecording();
                break;
            }
            }
        }
    };

    @Override
    public boolean onKeyDown(int keyCode, KeyEvent event) {
        if (keyCode == KeyEvent.KEYCODE_BACK) {
            finish();
        }
        return super.onKeyDown(keyCode, event);
    }
}

For more detail try this AUDIORECORD BLOG.

Happy Coding !!

The only real alternative here is to use some sort of custom widget with a modal option. Have a look at jQuery UI for an example of a dialog with these features. Similar things exist in just about every JS framework you can mention.

You can also do that from inteface builder like this.

I think it's helpful.

I was getting lazyLoading exceptions on my entity because I was trying to access a lazy loaded collection that was in session.

What I would do was in a separate request, retrieve the entity from session and then try to access a collection in my jsp page which was problematic.

To alleviate this, I updated the same entity in my controller and passed it to my jsp, although I imagine when I re-saved in session that it will also be accessible though SessionScope and not throw a LazyLoadingException, a modification of example 2:

The following has worked for me:

// scenario 2 MY WAY
// tran starts
e = new MyEntity();
e = em.merge(e); // re-assign to the same entity "e"

//access e from jsp and it will work dandy!!

Pandas have built-in function for conversion of dict to data frame.

pd.DataFrame.from_dict(dictionaryObject,orient='index')

For your data you can convert it like below:

import pandas as pd
your_dict={u'2012-06-08': 388,
 u'2012-06-09': 388,
 u'2012-06-10': 388,
 u'2012-06-11': 389,
 u'2012-06-12': 389,
 u'2012-06-13': 389,
 u'2012-06-14': 389,
 u'2012-06-15': 389,
 u'2012-06-16': 389,
 u'2012-06-17': 389,
 u'2012-06-18': 390,
 u'2012-06-19': 390,
 u'2012-06-20': 390,
 u'2012-06-21': 390,
 u'2012-06-22': 390,
 u'2012-06-23': 390,
 u'2012-06-24': 390,
 u'2012-06-25': 391,
 u'2012-06-26': 391,
 u'2012-06-27': 391,
 u'2012-06-28': 391,
 u'2012-06-29': 391,
 u'2012-06-30': 391,
 u'2012-07-01': 391,
 u'2012-07-02': 392,
 u'2012-07-03': 392,
 u'2012-07-04': 392,
 u'2012-07-05': 392,
 u'2012-07-06': 392}

your_df_from_dict=pd.DataFrame.from_dict(your_dict,orient='index')
print(your_df_from_dict)

You can use the Dictionary data type in python. It's very very similar to the hash—and it also supports nesting, similar to the to nested hash.

Example:

dict = {'Name': 'Zara', 'Age': 7, 'Class': 'First'}
dict['Age'] = 8; # update existing entry
dict['School'] = "DPS School" # Add new entry

print ("dict['Age']: ", dict['Age'])
print ("dict['School']: ", dict['School'])

For more information, please reference this tutorial on the dictionary data type.

Just include preventDefault() function in the code,

$("#txtSearchProdAssign").keydown(function (e) 
{
   if (e.keyCode == 13) 
   {
       e.preventDefault();
       $('input[name = butAssignProd]').click();
   }
});

get() returns a single object. If there is no existing object to return, you will receive <class>.DoesNotExist. If your query returns more than one object, then you will get MultipleObjectsReturned. You can check here for more details about get() queries.

Similarly, Django will complain if more than one item matches the get() query. In this case, it will raise MultipleObjectsReturned, which again is an attribute of the model class itself.

M2M will return any number of query that it is related to. In this case you can receive zero, one or more items with your query.

In your models you can us following:

for _topic in topic.objects.all():
    _topic.learningobjective_set.all()

you can use _set to execute a select query on M2M. In above case, you will filter all learningObjectives related to each topic

For methods which may fail, that is you specify boolean as return type, I would use the prefix try:

if (tryCreateFreshSnapshot())
{
  // ...
}

For all other cases use prefixes like is.. has.. was.. can.. allows.. ..

SELECT
main.CustomerID,
f.Data AS FirstName,
m.Data AS MiddleName,
l.Data AS LastName,
d.Data AS Date
FROM table main
INNER JOIN table f on f.CustomerID = main.CustomerID
INNER JOIN table m on m.CustomerID = main.CustomerID
INNER JOIN table l on l.CustomerID = main.CustomerID
INNER JOIN table d on d.CustomerID = main.CustomerID
WHERE f.DBColumnName = 'FirstName' 
AND m.DBColumnName = 'MiddleName' 
AND l.DBColumnName = 'LastName' 
AND d.DBColumnName = 'Date' 

Edit: I have written this without an editor & have not run the SQL. I hope, you get the idea.

Because & has a lesser priority than ==.

Your code is equivalent to a[0] & (1 == 0), and unless a[0] is a boolean this won't compile...

You need to:

(a[0] & 1) == 0

etc etc.

(yes, Java does hava a boolean & operator -- a non shortcut logical and)

I tried this too, and works very well:

      <%= link_to home_index_path do %>
      <div class='logo-container'>
        <div class='logo'>
          <%= image_tag('bar.ico') %>
        </div>
        <div class='brand' style='font-size: large;'>
          .BAR
        </div>
      </div>
      <% end %>

Use PHP Document Object Model:

<?php
   $str = '<h1>T1</h1>Lorem ipsum.<h1>T2</h1>The quick red fox...<h1>T3</h1>... jumps over the lazy brown FROG';
   $DOM = new DOMDocument;
   $DOM->loadHTML($str);

   //get all H1
   $items = $DOM->getElementsByTagName('h1');

   //display all H1 text
   for ($i = 0; $i < $items->length; $i++)
        echo $items->item($i)->nodeValue . "<br/>";
?>

This outputs as:

 T1
 T2
 T3

[EDIT]: After OP Clarification:

If you want the content like Lorem ipsum. etc, you can directly use this regex:

<?php
   $str = '<h1>T1</h1>Lorem ipsum.<h1>T2</h1>The quick red fox...<h1>T3</h1>... jumps over the lazy brown FROG';
   echo preg_replace("#<h1.*?>.*?</h1>#", "", $str);
?>

this outputs:

Lorem ipsum.The quick red fox...... jumps over the lazy brown FROG

• Changing Values:
  • array_map cannot change the values inside input array(s) while array_walk can; in particular, array_map never changes its arguments.
• Array Keys Access:
  • array_map cannot operate with the array keys, array_walk can.
• Return Value:
  • array_map returns a new array, array_walk only returns true. Hence, if you don't want to create an array as a result of traversing one array, you should use array_walk.
• Iterating Multiple Arrays:
  • array_map also can receive an arbitrary number of arrays and it can iterate over them in parallel, while array_walk operates only on one.
• Passing Arbitrary Data to Callback:
  • array_walk can receive an extra arbitrary parameter to pass to the callback. This mostly irrelevant since PHP 5.3 (when anonymous functions were introduced).
• Length of Returned Array:
  • The resulting array of array_map has the same length as that of the largest input array; array_walk does not return an array but at the same time it cannot alter the number of elements of original array; array_filter picks only a subset of the elements of the array according to a filtering function. It does preserve the keys.

Example:

<pre>
<?php

$origarray1 = array(2.4, 2.6, 3.5);
$origarray2 = array(2.4, 2.6, 3.5);

print_r(array_map('floor', $origarray1)); // $origarray1 stays the same

// changes $origarray2
array_walk($origarray2, function (&$v, $k) { $v = floor($v); }); 
print_r($origarray2);

// this is a more proper use of array_walk
array_walk($origarray1, function ($v, $k) { echo "$k => $v", "\n"; });

// array_map accepts several arrays
print_r(
    array_map(function ($a, $b) { return $a * $b; }, $origarray1, $origarray2)
);

// select only elements that are > 2.5
print_r(
    array_filter($origarray1, function ($a) { return $a > 2.5; })
);

?>
</pre>

Result:

Array
(
    [0] => 2
    [1] => 2
    [2] => 3
)
Array
(
    [0] => 2
    [1] => 2
    [2] => 3
)
0 => 2.4
1 => 2.6
2 => 3.5
Array
(
    [0] => 4.8
    [1] => 5.2
    [2] => 10.5
)
Array
(
    [1] => 2.6
    [2] => 3.5
)

If you want to take the formatted value of input do this :

$("input").datepicker({ dateFormat: 'dd, mm, yy' });

later in your code when the date is set you could get it by

dateVariable = $("input").val();

If you want just to take a formatted value with datepicker you might want to use the utility

dateString = $.datepicker.formatDate('dd, MM, yy', new Date("20 April 2012"));

I've updated the jsfiddle for experimenting with this

Try using WSDL.exe and then including the generated file (.cs) into your project.

Fire up the Visual Studio Command prompt (under visual studio/tools in the start menu) then type

>wsdl.exe [path To Your WSDL File]

That'll spit out a file, which you copy/move and include in your project. That file contains a class which is a proxy to your sevice, Fire up an instance of that class, and it'll have a URL property you can set on the fly, and a bunch of methods that you can call. It'll also generate classes for all/any complex objects passed across the service interface.

seems you can't find the full path in you localhost by js, but you can hide the fakepath to just show the file name. Use jQuery to get the file input's selected filename without the path

1. To Compile your C++ code use:-

g++ file_name.cpp -o executable_file_name

(i) -o option is used to show error in the code (ii) if there is no error in the code_file, then it will generate an executable file.

2. Now execute the generated executable file:

./executable_file_name

No you can't; datetime will be stored in default format only while creating table and then you can change the display format in you select query the way you want using the Mysql Date Time Functions

Use this:

word = raw_input("Please enter a single word : ")
while True:
    if " " in word:
        word = raw_input("Please enter a single word : ")
    else:
        print "Thanks"
        break

This is very simple in LinQ... You can use the select statement to get an Enumerable of properties of the objects.

var mySkus = myLines.Select(x => x.Sku);

Or if you want it as an Array just do...

var mySkus = myLines.Select(x => x.Sku).ToArray();

If you want to go the delete all objects route (which is much simpler than tearing down the Core Data stack, but less performant), than this is a better implementation:

- (void)deleteAllManagedObjectsInModel:(NSManagedObjectModel *)managedObjectModel context:(NSManagedObjectContext *)managedObjectContext
{
    NSBlockOperation *operation = [NSBlockOperation blockOperationWithBlock:^{
        [managedObjectContext performBlockAndWait:^{
            for (NSEntityDescription *entity in managedObjectModel) {
                NSFetchRequest *fetchRequest = [NSFetchRequest new];
                [fetchRequest setEntity:entity];
                [fetchRequest setIncludesSubentities:NO];
                NSArray *objects = [managedObjectContext executeFetchRequest:fetchRequest error:nil];
                for (NSManagedObject *managedObject in objects) {
                    [managedObjectContext deleteObject:managedObject];
                }            
            }

            [managedObjectContext save:nil];
        }];
    }];
    [operation setCompletionBlock:^{
        // Do stuff once the truncation is complete
    }];
    [operation start];
}

This implementation leverages NSOperation to perform the deletion off of the main thread and notify on completion. You may want to emit a notification or something within the completion block to bubble the status back to the main thread.

To Install bash you can do:

RUN apk add --update bash && rm -rf /var/cache/apk/*

If you do not want to add extra size to your image, you can use ash or sh that ships with alpine.

Reference: https://github.com/smebberson/docker-alpine/issues/43

Try it:

$table->integer('user_id')->unsigned()->nullable();

The simplest way is to interrupt() it, which will cause Thread.currentThread().isInterrupted() to return true, and may also throw an InterruptedException under certain circumstances where the Thread is waiting, for example Thread.sleep(), otherThread.join(), object.wait() etc.

Inside the run() method you would need catch that exception and/or regularly check the Thread.currentThread().isInterrupted() value and do something (for example, break out).

Note: Although Thread.interrupted() seems the same as isInterrupted(), it has a nasty side effect: Calling interrupted() clears the interrupted flag, whereas calling isInterrupted() does not.

Other non-interrupting methods involve the use of "stop" (volatile) flags that the running Thread monitors.

For Those who want to validate an Enum in their code you can following the guide

In Regex World you can use ^ for starting a string and $ to end it. Using them in combination with | could be what you want :

^(Male)$|^(Female)$

It will return true only for Male or Female case.

My problems solved by remove all the runtime part

<runtime>
        <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
            <dependentAssembly>
                <assemblyIdentity name="System.Web.Helpers" publicKeyToken="31bf3856ad364e35"/>
                <bindingRedirect oldVersion="1.0.0.0-3.0.0.0" newVersion="3.0.0.0"/>
            </dependentAssembly>
            <dependentAssembly>
                <assemblyIdentity name="System.Web.WebPages" publicKeyToken="31bf3856ad364e35"/>
                <bindingRedirect oldVersion="1.0.0.0-3.0.0.0" newVersion="3.0.0.0"/>
            </dependentAssembly>
        </assemblyBinding>
    </runtime>

Here is what i have done to find the version: just write SELECT @@version and it will give you the version.

Short answer

1. Reattach without ejecting others: screen -x
2. Get list of displays: ^A *, select the one to disconnect, press d

Explained answer

Background: When I was looking for the solution with same problem description, I have always landed on this answer. I would like to provide more sensible solution. (For example: the other attached screen has a different size and a I cannot force resize it in my terminal.)

Note: PREFIX is usually ^A = ctrl+a

Note: the display may also be called:

• "user front-end" (in at command manual in screen)
• "client" (tmux vocabulary where this functionality is detach-client)
• "terminal" (as we call the window in our user interface) /depending on

1. Reattach a session: screen -x

-x attach to a not detached screen session without detaching it

2. List displays of this session: PREFIX *

It is the default key binding for: PREFIX :displays. Performing it within the screen, identify the other display we want to disconnect (e.g. smaller size). (Your current display is displayed in brighter color/bold when not selected).

term-type   size         user interface           window       Perms
---------- ------- ---------- ----------------- ----------     -----
 screen     240x60         you@/dev/pts/2      nb  0(zsh)        rwx
 screen      78x40         you@/dev/pts/0      nb  0(zsh)        rwx

Using arrows ? ?, select the targeted display, press d If nothing happens, you tried to detach your own display and screen will not detach it. If it was another one, within a second or two, the entry will disappear.

Press ENTER to quit the listing.

Optionally: in order to make the content fit your screen, reflow: PREFIX F (uppercase F)

Excerpt from man page of screen:

displays

Shows a tabular listing of all currently connected user front-ends (displays). This is most useful for multiuser sessions. The following keys can be used in displays list:

• mouseclick Move to the selected line. Available when "mousetrack" is set to on.
• space Refresh the list
• d Detach that display
• D Power detach that display
• C-g, enter, or escape Exit the list

try to fix type="JavaScript" to type="text/javascript" in you vue.js srcipt tag, or just remove it. Modern browsers will take script tag as javascript as default.

Explanation

You got different things here:

First:

• If you use a service you will get the instance of a function ("this" keyword).
• If you use a factory you will get the value that is returned by invoking the function reference (the return statement in factory).

ref: angular.service vs angular.factory

Second:

Keep in mind all providers in AngularJS (value, constant, services, factories) are singletons!

Third:

Using one or the other (service or factory) is about code style. But, the common way in AngularJS is to use factory.

Why ?

Because "The factory method is the most common way of getting objects into AngularJS dependency injection system. It is very flexible and can contain sophisticated creation logic. Since factories are regular functions, we can also take advantage of a new lexical scope to simulate "private" variables. This is very useful as we can hide implementation details of a given service."

(ref: http://www.amazon.com/Mastering-Web-Application-Development-AngularJS/dp/1782161821).

Usage

Service : Could be useful for sharing utility functions that are useful to invoke by simply appending () to the injected function reference. Could also be run with injectedArg.call(this) or similar.

Factory : Could be useful for returning a ‘class’ function that can then be new`ed to create instances.

So, use a factory when you have complex logic in your service and you don't want expose this complexity.

In other cases if you want to return an instance of a service just use service.

But you'll see with time that you'll use factory in 80% of cases I think.

For more details: http://blog.manishchhabra.com/2013/09/angularjs-service-vs-factory-with-example/

UPDATE :

Excellent post here : http://iffycan.blogspot.com.ar/2013/05/angular-service-or-factory.html

"If you want your function to be called like a normal function, use factory. If you want your function to be instantiated with the new operator, use service. If you don't know the difference, use factory."

UPDATE :

AngularJS team does his work and give an explanation: http://docs.angularjs.org/guide/providers

And from this page :

"Factory and Service are the most commonly used recipes. The only difference between them is that Service recipe works better for objects of custom type, while Factory can produce JavaScript primitives and functions."

Use an control flow library like after

after.map(array, function (value, done) {
    // do something async
    setTimeout(function () {
        // do something with the value
        done(null, value * 2)
    }, 10)
}, function (err, mappedArray) {
    // all done, continue here
    console.log(mappedArray)
})

you didn't use time() function that returns the current time measured in the number of seconds since the Unix Epoch (January 1 1970 00:00:00 GMT). use like this:

$date = strtotime(time());
$date = strtotime("+7 day", $date);
echo date('M d, Y', $date);

If you have the column and the sequence, you first need to populate a new key for all the existing rows. Assuming you don't care which key is assigned to which row

UPDATE table_name
   SET new_pk_column = sequence_name.nextval;

Once that's done, you can create the primary key constraint (this assumes that either there is no existing primary key constraint or that you have already dropped the existing primary key constraint)

ALTER TABLE table_name
  ADD CONSTRAINT pk_table_name PRIMARY KEY( new_pk_column )

If you want to generate the key automatically, you'd need to add a trigger

CREATE TRIGGER trigger_name
  BEFORE INSERT ON table_name
  FOR EACH ROW
BEGIN
  :new.new_pk_column := sequence_name.nextval;
END;

If you are on an older version of Oracle, the syntax is a bit more cumbersome

CREATE TRIGGER trigger_name
  BEFORE INSERT ON table_name
  FOR EACH ROW
BEGIN
  SELECT sequence_name.nextval
    INTO :new.new_pk_column
    FROM dual;
END;

The official way of doing this based on this Post-installation steps for Linux guide and what I found while web-crawling is as follows:

1. Override the docker service conf:

    sudo systemctl edit docker.service
   

2. Add or modify the following lines, substituting your own values.

    [Service]
    ExecStart=
    ExecStart=/usr/bin/dockerd --graph="/mnt/docker"
   

Save the file. (It creates: /etc/systemd/system/docker.service.d/override.conf)

3. Reload the systemctl configuration.

    sudo systemctl daemon-reload
   

4. Restart Docker.

    sudo systemctl restart docker.service
   

After this if you can nuke /var/lib/docker folder if you do not have any images there you care to backup.

Try this:

select songName from t
where personName in ('Ryan', 'Holly')
group by songName
having count(distinct personName) = 2

The number in the having should match the amount of people. If you also need the Status to be Complete use this where clause instead of the previous one:

where personName in ('Ryan', 'Holly') and status = 'Complete'

int x;
ifile >> x

while (!iFile.eof())
{  
    cerr << x << endl;        
    iFile >> x;      
}

To update component

 @Injectable()
    export class LoginService{
    private isUserLoggedIn: boolean = false;

    public setLoggedInUser(flag) { // you need set header flag true false from other components on basis of your requirements, header component will be visible as per this flag then
    this.isUserLoggedIn= flag;
    }


public getUserLoggedIn(): boolean {
return this.isUserLoggedIn;
}

Login Component ts
            Login Component{
             constructor(public service: LoginService){}

public login(){
service.setLoggedInUser(true);
}
            }
Inside Header component

 Header Component ts
        HeaderComponent {
         constructor(public service: LoginService){}

         public getUserLoggedIn(): boolean { return this.service.getUserLoggedIn()}
        }

template of header component: Check for user sign in here

<button *ngIf="getUserLoggedIn()">Sign Out</button>
<button *ngIf="!getUserLoggedIn()">Sign In</button>

You can use many approach like show hide using ngIf

App Component ts
AppComponent {
 public showHeader: boolean = true;
}
App Component html
<div *ngIf='showHeader'> // you show hide on basis of this ngIf and header component always get visible with it's lifecycle hook ngOnInit() called all the time when it get visible
<app-header></app-header>
</div>
<router-outlet></router-outlet>
<app-footer></app-footer>

You can also use service

@Injectable()
export class AppService {
private showHeader: boolean = false;

public setHeader(flag) { // you need set header flag true false from other components on basis of your requirements, header component will be visible as per this flag then
this.showHeader = flag;
}

public getHeader(): boolean {
return this.showHeader;
}
}

App Component.ts
    AppComponent {
     constructor(public service: AppService){}
    }

App Component.html
    <div *ngIf='service.showHeader'> // you show hide on basis of this ngIf and header component always get visible with it's lifecycle hook ngOnInit() called all the time when it get visible
    <app-header></app-header>
    </div>
    <router-outlet></router-outlet>
    <app-footer></app-footer>

Javadoc to the rescue :

A Scanner breaks its input into tokens using a delimiter pattern, which by default matches whitespace

nextLine is probably the method you should use.

My resolution was adding the following import: import { of } from 'rxjs/observable/of';

So the overall code of hero.service.ts after the change is:

import { Injectable } from '@angular/core';
import { Hero } from './hero';
import { HEROES } from './mock-heroes';
import { of } from 'rxjs/observable/of';
import {Observable} from 'rxjs/Observable';

@Injectable()
export class HeroService {

  constructor() { }

  getHeroes(): Observable<Hero[]> {
    return of(HEROES);
  }
}

The preferred modern method is to use addEventListener either by adding the event listener direct to the element or to a parent of the elements (delegated).

An example, using delegated events, might be

var box = document.getElementById('box');_x000D_
_x000D_
document.getElementById('buttons').addEventListener('click', function(evt) {_x000D_
  var target = evt.target;_x000D_
  if (target.id === 'yes') {_x000D_
    box.style.backgroundColor = 'red';_x000D_
  } else if (target.id === 'no') {_x000D_
    box.style.backgroundColor = 'green';_x000D_
  } else {_x000D_
    box.style.backgroundColor = 'purple';_x000D_
  }_x000D_
}, false);

#box {_x000D_
  width: 200px;_x000D_
  height: 200px;_x000D_
  background-color: red;_x000D_
}_x000D_
#buttons {_x000D_
  margin-top: 50px;_x000D_
}

<div id='box'></div>_x000D_
<div id='buttons'>_x000D_
  <button id='yes'>yes</button>_x000D_
  <button id='no'>no</button>_x000D_
  <p>Click one of the buttons above.</p>_x000D_
</div>

You can download the Apache Standard Taglib and include the jar in your project.

For those wanting the box-shadow on the col-* container itself and not on the .container, you can add another div just inside the col-* element, and add the shadow to that. This element will not have the padding, and therefor not interfere.

The first image has the box-shadow on the col-* element. Because of the 15px padding on the col element, the shadow is pushed to the outside of the div element rather than on the visual edges of it.

<div class="col-md-4" style="box-shadow: 0px 2px 25px rgba(0, 0, 0, .25);">
    <div class="thumbnail">
        {!! HTML::image('images/sampleImage.png') !!}
    </div>
</div>

The second image has a wrapper div with the box-shadow on it. This will place the box-shadow on the visual edges of the element.

<div class="col-md-4">
    <div id="wrapper-div" style="box-shadow: 0px 2px 25px rgba(0, 0, 0, .25);">
        <div class="thumbnail">
            {!! HTML::image('images/sampleImage.png') !!}
        </div>
    </div>
</div>

It's better to use JSON.parse(yourUnescapedJson);

Views in Oracle may be updateable under specific conditions. It can be tricky, and usually is not advisable.

From the Oracle 10g SQL Reference:

Notes on Updatable Views

An updatable view is one you can use to insert, update, or delete base table rows. You can create a view to be inherently updatable, or you can create an INSTEAD OF trigger on any view to make it updatable.

To learn whether and in what ways the columns of an inherently updatable view can be modified, query the USER_UPDATABLE_COLUMNS data dictionary view. The information displayed by this view is meaningful only for inherently updatable views. For a view to be inherently updatable, the following conditions must be met:

• Each column in the view must map to a column of a single table. For example, if a view column maps to the output of a TABLE clause (an unnested collection), then the view is not inherently updatable.
• The view must not contain any of the following constructs:
  • A set operator
  • a DISTINCT operator
  • An aggregate or analytic function
  • A GROUP BY, ORDER BY, MODEL, CONNECT BY, or START WITH clause
  • A collection expression in a SELECT list
  • A subquery in a SELECT list
  • A subquery designated WITH READ ONLY
  • Joins, with some exceptions, as documented in Oracle Database Administrator's Guide

In addition, if an inherently updatable view contains pseudocolumns or expressions, then you cannot update base table rows with an UPDATE statement that refers to any of these pseudocolumns or expressions.

If you want a join view to be updatable, then all of the following conditions must be true:

• The DML statement must affect only one table underlying the join.
• For an INSERT statement, the view must not be created WITH CHECK OPTION, and all columns into which values are inserted must come from a key-preserved table. A key-preserved table is one for which every primary key or unique key value in the base table is also unique in the join view.
• For an UPDATE statement, all columns updated must be extracted from a key-preserved table. If the view was created WITH CHECK OPTION, then join columns and columns taken from tables that are referenced more than once in the view must be shielded from UPDATE.
• For a DELETE statement, if the join results in more than one key-preserved table, then Oracle Database deletes from the first table named in the FROM clause, whether or not the view was created WITH CHECK OPTION.

Think of it as enforcing Eager-Loading in a scenario where you sub-items would otherwise be lazy-loading.

The Query EF is sending to the database will yield a larger result at first, but on access no follow-up queries will be made when accessing the included items.

On the other hand, without it, EF would execute separte queries later, when you first access the sub-items.

x = float(raw_input("enter number between 0 and 1: "))

p = 0
while ((2**p)*x) %1 != 0:
    p += 1
    # print p

    num = int (x * (2 ** p))
    # print num

    result = ''
    if num == 0:
        result = '0'
    while num > 0:
        result = str(num%2) + result
        num = num / 2

    for i in range (p - len(result)):
        result = '0' + result
    result = result[0:-p] + '.' + result[-p:]

print result #this will print result for the decimal portion

Another Apache ObjectUtils example. Able to sort other types of objects.

@Override
public int compare(Object o1, Object o2) {
    String s1 = ObjectUtils.toString(o1);
    String s2 = ObjectUtils.toString(o2);
    return s1.toLowerCase().compareTo(s2.toLowerCase());
}

studying the above answers almost worked for me ... but I still had a problem that I could 'fling' the view on 2.1 (seemed to be fixed with 2.2 & 2.3).

here is my final solution

public class MyWebView extends WebView
{
private boolean bAllowScroll = true;
@SuppressWarnings("unused") // it is used, just java is dumb
private long downtime;

public MyWebView(Context context, AttributeSet attrs)
{
    super(context, attrs);
}

public void setAllowScroll(int allowScroll)
{
    bAllowScroll = allowScroll!=0;
    if (!bAllowScroll)
        super.scrollTo(0,0);
    setHorizontalScrollBarEnabled(bAllowScroll);
    setVerticalScrollBarEnabled(bAllowScroll);
}

@Override
public boolean onTouchEvent(MotionEvent ev) 
{
    switch (ev.getAction())
    {
    case MotionEvent.ACTION_DOWN:
        if (!bAllowScroll)
            downtime = ev.getEventTime();
        break;
    case MotionEvent.ACTION_CANCEL:
    case MotionEvent.ACTION_UP:
        if (!bAllowScroll)
        {
            try {
                Field fmNumSamples = ev.getClass().getDeclaredField("mNumSamples");
                fmNumSamples.setAccessible(true);
                Field fmTimeSamples = ev.getClass().getDeclaredField("mTimeSamples");
                fmTimeSamples.setAccessible(true);
                long newTimeSamples[] = new long[fmNumSamples.getInt(ev)];
                newTimeSamples[0] = ev.getEventTime()+250;
                fmTimeSamples.set(ev,newTimeSamples);
            } catch (Exception e) {
                e.printStackTrace();
            }
        }
        break;
    }
    return super.onTouchEvent(ev);
}

@Override
public void flingScroll(int vx, int vy)
{
    if (bAllowScroll)
        super.flingScroll(vx,vy);
}

@Override
protected void onScrollChanged(int l, int t, int oldl, int oldt)
{
    if (bAllowScroll)
        super.onScrollChanged(l, t, oldl, oldt);
    else if (l!=0 || t!=0)
        super.scrollTo(0,0);
}

@Override
public void scrollTo(int x, int y)
{
    if (bAllowScroll)
        super.scrollTo(x,y);
}

@Override
public void scrollBy(int x, int y)
{
    if (bAllowScroll)
        super.scrollBy(x,y);
}
}

Login to Server as Admin

Go To Security > Logins > New Login

Step 1:

Login Name : SomeName

Step 2:

Select  SQL Server / Windows Authentication.

More Info on, what is the differences between sql server authentication and windows authentication..?

Choose Default DB and Language of your choice

Click OK

Try to connect with the New User Credentials, It will prompt you to change the password. Change and login

OR

Try with query :

USE [master] -- Default DB
GO

CREATE LOGIN [Username] WITH PASSWORD=N'123456', DEFAULT_DATABASE=[master], DEFAULT_LANGUAGE=[us_english], CHECK_EXPIRATION=ON, CHECK_POLICY=ON
GO

--123456 is the Password And Username is Login User 
ALTER LOGIN [Username] enable -- Enable or to Disable User
GO

Here you have another solution based on the one provided by @tarheel

function onEdit() {
    var sheetWithNestedSelectsName = "Sitemap";
    var columnWithNestedSelectsRoot = 1;
    var sheetWithOptionPossibleValuesSuffix = "TabSections";

    var activeSpreadsheet = SpreadsheetApp.getActiveSpreadsheet();
    var activeSheet = SpreadsheetApp.getActiveSheet();

    // If we're not in the sheet with nested selects, exit!
    if ( activeSheet.getName() != sheetWithNestedSelectsName ) {
        return;
    }

    var activeCell = SpreadsheetApp.getActiveRange();

    // If we're not in the root column or a content row, exit!
    if ( activeCell.getColumn() != columnWithNestedSelectsRoot || activeCell.getRow() < 2 ) {
        return;
    }

    var sheetWithActiveOptionPossibleValues = activeSpreadsheet.getSheetByName( activeCell.getValue() + sheetWithOptionPossibleValuesSuffix );

    // Get all possible values
    var activeOptionPossibleValues = sheetWithActiveOptionPossibleValues.getSheetValues( 1, 1, -1, 1 );

    var possibleValuesValidation = SpreadsheetApp.newDataValidation();
    possibleValuesValidation.setAllowInvalid( false );
    possibleValuesValidation.requireValueInList( activeOptionPossibleValues, true );

    activeSheet.getRange( activeCell.getRow(), activeCell.getColumn() + 1 ).setDataValidation( possibleValuesValidation.build() );
}

It has some benefits over the other approach:

• You don't need to edit the script every time you add a "root option". You only have to create a new sheet with the nested options of this root option.
• I've refactored the script providing more semantic names for the variables and so on. Furthermore, I've extracted some parameters to variables in order to make it easier to adapt to your specific case. You only have to set the first 3 values.
• There's no limit of nested option values (I've used the getSheetValues method with the -1 value).

So, how to use it:

1. Create the sheet where you'll have the nested selectors
2. Go to the "Tools" > "Script Editor…" and select the "Blank project" option
3. Paste the code attached to this answer
4. Modify the first 3 variables of the script setting up your values and save it
5. Create one sheet within this same document for each possible value of the "root selector". They must be named as the value + the specified suffix.

Enjoy!

For me it turned out that I had a @JsonManagedReferece in one entity without a @JsonBackReference in the other referenced entity. This caused the marshaller to throw an error.

I would suggest concat when dealing with 2 strings, and || when those strings are more than 2:

select concat(a,b)
  from dual

or

  select 'a'||'b'||'c'||'d'
        from dual

Check your environment variables.

In my case I had JAVA_HOME set in the System variables as well as in my User Account variables and the latter was set to a wrong version of Java. I also had the same problem with the Path variable.

After deleting JAVA_HOME from my User Account variables and removing the wrong path from the Path variable it worked correctly.

You might be able to write code on a Linux box that will eventually find itself on an iPhone or iPad, but ultimately you would need a Mac to test or deploy the code to the iPhone or to submit it to the App store. So ultimately you need a Mac, so you might as well do the work on the Mac too, with all the tools that Apple provide. There are alternatives to Xcode & Objective-C, such as Monotouch - but these utilize the Apple tools too.

You can with some work run OS X in a VM on Linux. However I should point out that this will break the OSX license agreement, even if you buy the copy of OSX - as it is only licensed to run on Apple hardware.

Sorry to give you this news - the ecosystem around the iPhone/iPad is very tightly controlled.

EDIT: One major exception to this is writing a web app for the iPhone. There are some excellent web apps for the iPhone which are almost as good as user experience as a native app. However I did interpret your question to be about native app development. Web apps, although the user can create an icon for launching them - are still 'second class' citizens.

Based on your application type/size/load/no. of users ..etc - u can keep following as your production properties

spring.datasource.tomcat.initial-size=50
spring.datasource.tomcat.max-wait=20000
spring.datasource.tomcat.max-active=300
spring.datasource.tomcat.max-idle=150
spring.datasource.tomcat.min-idle=8
spring.datasource.tomcat.default-auto-commit=true

AFAIK, unit testing is NOT functional testing. Let me explain with a small example. You want to test if the login functionality of an email web app is working or not, just as a user would. For that, your functional tests should be like this.

1- existing email, wrong password -> login page should show error "wrong password"!
2- non-existing email, any password -> login page should show error "no such email".
3- existing email, right password -> user should be taken to his inbox page.
4- no @symbol in email, right password -> login page should say "errors in form, please fix them!" 

Should our functional tests check if we can login with invalid inputs ? Eg. Email has no @ symbol, username has more than one dot (only one dot is permitted), .com appears before @ etc. ? Generally, no ! That kind of testing goes into your unit tests.

You can check if invalid inputs are rejected inside unit tests as shown in the tests below.

class LoginInputsValidator
  method validate_inputs_values(email, password)
    1-If email is not like [email protected], then throw error.
    2-If email contains abusive words, then throw error.
    3-If password is less than 10 chars, throw error.

Notice that the functional test 4 is actually doing what unit test 1 is doing. Sometimes, functional tests can repeat some (not all) of the testing done by unit tests, for different reasons. In our example, we use functional test 4 to check if a particular error message appears on entering invalid input. We don't want to test if all bad inputs are rejected or not. That is the job of unit tests.

Without single quotes around it, you are creating an array with two objects inside of it. This is JavaScript's own syntax. When you add the quotes, that object (array+2 objects) is now a string. You can use JSON.parse to convert a string into a JavaScript object. You cannot use JSON.parse to convert a JavaScript object into a JavaScript object.

//String - you can use JSON.parse on it
var jsonStringNoQuotes = '[{"Id":"10","Name":"Matt"},{"Id":"1","Name":"Rock"}]';

//Already a javascript object - you cannot use JSON.parse on it
var jsonStringNoQuotes = [{"Id":"10","Name":"Matt"},{"Id":"1","Name":"Rock"}];

Furthermore, your last example fails because you are adding literal single quote characters to the JSON string. This is illegal. JSON specification states that only double quotes are allowed. If you were to console.log the following...

console.log("'"+[{"Id":"10","Name":"Matt"},{"Id":"1","Name":"Rock"}]+"'");
//Logs:
'[object Object],[object Object]'

You would see that it returns the string representation of the array, which gets converted to a comma separated list, and each list item would be the string representation of an object, which is [object Object]. Remember, associative arrays in javascript are simply objects with each key/value pair being a property/value.

Why does this happen? Because you are starting with a string "'", then you are trying to append the array to it, which requests the string representation of it, then you are appending another string "'".

Please do not confuse JSON with Javascript, as they are entirely different things. JSON is a data format that is humanly readable, and was intended to match the syntax used when creating javascript objects. JSON is a string. Javascript objects are not, and therefor when declared in code are not surrounded in quotes.

See this fiddle: http://jsfiddle.net/NrnK5/

The following code worked for me:

echo userInput

Please make sure that you don't do any network access on UI Thread, instead do it in Async Task

The reason why your application crashes on Android versions 3.0 and above, but works fine on Android 2.x is because since HoneyComb are much stricter about abuse against the UI Thread. For example, when an Android device running HoneyComb or above detects a network access on the UI thread, a NetworkOnMainThreadException will be thrown.

See this

If you want the second highest number you can use

=LARGE(E4:E9;2)

although that doesn't account for duplicates so you could get the same result as the Max

If you want the largest number that is smaller than the maximum number you can use this version

=LARGE(E4:E9;COUNTIF(E4:E9;MAX(E4:E9))+1)

Using the approach described in Fabio Iotti's answer I have created a more generic solution:

public abstract class ValidatedTextBox : TextBox {
    private string m_lastText = string.Empty;
    protected abstract bool IsValid(string text);
    protected sealed override void OnTextChanged(EventArgs e) {
        if (!IsValid(Text)) {
            var pos = SelectionStart - Text.Length + m_lastText.Length;
            Text = m_lastText;
            SelectionStart = Math.Max(0, pos);
        }
        m_lastText = Text;
        base.OnTextChanged(e);
    }
}

"ValidatedTextBox", which contains all nontrivial validation behavior. All that's left to do is inherit from this class and override "IsValid" method with whatever validation logic is required. For example, using this class, it is possible to create "RegexedTextBox" which will accept only strings which match specific regular expression:

public abstract class RegexedTextBox : ValidatedTextBox {
    private readonly Regex m_regex;
    protected RegexedTextBox(string regExpString) {
        m_regex = new Regex(regExpString);
    }
    protected override bool IsValid(string text) {
        return m_regex.IsMatch(Text);
    }
}

After that, inheriting from the "RegexedTextBox" class, we can easily create "PositiveNumberTextBox" and "PositiveFloatingPointNumberTextBox" controls:

public sealed class PositiveNumberTextBox : RegexedTextBox {
    public PositiveNumberTextBox() : base(@"^\d*$") { }
}

public sealed class PositiveFloatingPointNumberTextBox : RegexedTextBox {
    public PositiveFloatingPointNumberTextBox()
        : base(@"^(\d+\" + CultureInfo.CurrentCulture.NumberFormat.NumberDecimalSeparator + @")?\d*$") { }
}

You have to set the http header at the http response of your resource. So it needs to be set serverside, you can remove the "HTTP_OPTIONS"-header from your angular HTTP-Post request.

I think that you have a version 2.4.x of Apache.

Have you sure that you load this 2 modules ? - mod_authn_core - mod_authz_core

LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_core_module modules/mod_authz_core.so

PS : My recommendation for authorization and rights is (by default) :

LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so

I used this code to convert all columns to numeric except the first one:

    library(dplyr)
    # check structure, row and column number with: glimpse(df)
    # convert to numeric e.g. from 2nd column to 10th column
    df <- df %>% 
     mutate_at(c(2:10), as.numeric)

Login to both your SQL Box and your client and type:

ipconfig /flushdns
nbtstat -R

If that doesn't work, renew your DHCP on your client machine... This work for 2 PCs in our office.

public MainWindow(){
    List<person> personList = new List<person>();

    personList.Add(new person { name = "rob", age = 32 } );
    personList.Add(new person { name = "annie", age = 24 } );
    personList.Add(new person { name = "paul", age = 19 } );

    comboBox1.DataSource = personList;
    comboBox1.DisplayMember = "name";

    comboBox1.SelectionChanged += new SelectionChangedEventHandler(comboBox1_SelectionChanged);
}


void comboBox1_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
    person selectedPerson = comboBox1.SelectedItem as person;
    messageBox.Show(selectedPerson.name, "caption goes here");
}

boom.

Yes! Parameters and Arguments have different meanings, which can be easily explained as follows:

Function Parameters are the names listed in the function definition.

Function Arguments are the real values passed to (and received by) the function.

the easiest solution is (If you have already installed angular) :

1 remove the ng alias if existing

unalias ng

2 add the correct alias

alias ng="/Users/<user_name>/.npm-global/bin/ng"

3 run ng serve for example and it will work.

Enough already is said on this topic by good folks here. But here is my 2 cents.

There are 2 modes of interaction:

1. human-to-machine (HTM)
2. machine-to-machine (MTM)

The machine is the common denominator, expressed as the REST APIs, and the actors/clients being either the humans or the machines.

Now, in a truly RESTful architecture, the concept of statelessness implies that all relevant application states (meaning the client side states) must be supplied with each and every request. By relevant, it is meant that whatever is required by the REST API to process the request and serve an appropriate response.

When we consider this in the context of human-to-machine applications, "browser-based" as Skrebbel points out above, this means that the (web) application running in the browser will need to send its state and relevant information with each request it makes to the back end REST APIs.

Consider this: You have a data/information platform exposed asset of REST APIs. Perhaps you have a self-service BI platform that handles all the data cubes. But you want your (human) customers to access this via (1) web app, (2) mobile app, and (3) some 3rd party application. In the end, even chain of MTMs leads up to HTM - right. So human users remain at the apex of information chain.

In the first 2 cases, you have a case for human-to-machine interaction, the information being actually consumed by a human user. In the last case, you have a machine program consuming the REST APIs.

The concept of authentication applies across the board. How will you design this so that your REST APIs are accessed in a uniform, secured manner? The way I see this, there are 2 ways:

Way-1:

1. There is no login, to begin with. Every request performs the login
2. The client sends its identifying parameters + the request specific parameters with each request
3. The REST API takes them, turns around, pings the user store (whatever that is) and confirms the auth
4. If the auth is established, services the request; otherwise, denies with appropriate HTTP status code
5. Repeat the above for every request across all the REST APIs in your catalog

Way-2:

1. The client begins with an auth request
2. A login REST API will handle all such requests
3. It takes in auth parameters (API key, uid/pwd or whatever you choose) and verifies auth against the user store (LDAP, AD, or MySQL DB etc.)
4. If verified, creates an auth token and hands it back to the client/caller
5. The caller then sends this auth token + request specific params with every subsequent request to other business REST APIs, until logged out or until the lease expires

Clearly, in Way-2, the REST APIs will need a way to recognize and trust the token as valid. The Login API performed the auth verification, and therefore that "valet key" needs to be trusted by other REST APIs in your catalog.

This, of course, means that the auth key/token will need to be stored and shared among the REST APIs. This shared, trusted token repository can be local/federated whatever, allowing REST APIs from other organizations to trust each other.

But I digress.

The point is, a "state" (about the client's authenticated status) needs to be maintained and shared so that all REST APIs can create a circle of trust. If we do not do this, which is the Way-1, we must accept that an act of authentication must be performed for any/all requests coming in.

Performing authentication is a resource-intensive process. Imagine executing SQL queries, for every incoming request, against your user store to check for uid/pwd match. Or, to encrypt and perform hash matches (the AWS style). And architecturally, every REST API will need to perform this, I suspect, using a common back-end login service. Because, if you don't, then you litter the auth code everywhere. A big mess.

So more the layers, more latency.

Now, take Way-1 and apply to HTM. Does your (human) user really care if you have to send uid/pwd/hash or whatever with every request? No, as long as you don't bother her by throwing the auth/login page every second. Good luck having customers if you do. So, what you will do is to store the login information somewhere on the client side, in the browser, right at the beginning, and send it with every request made. For the (human) user, she has already logged in, and a "session" is available. But in reality, she is authenticated on every request.

Same with Way-2. Your (human) user will never notice. So no harm was done.

What if we apply Way-1 to MTM? In this case, since its a machine, we can bore the hell out of this guy by asking it submit authentication information with every request. Nobody cares! Performing Way-2 on MTM will not evoke any special reaction; its a damn machine. It could care less!

So really, the question is what suits your need. Statelessness has a price to pay. Pay the price and move on. If you want to be a purist, then pay the price for that too, and move on.

In the end, philosophies do not matter. What really matters is information discovery, presentation, and the consumption experience. If people love your APIs, you did your job.

Extracting the Year say from ['2018-03-04']

df['Year'] = pd.DatetimeIndex(df['date']).year  

The df['Year'] creates a new column. While if you want to extract the month just use .month

@Rob Sedgwick's answer gave me a pointer, However, in my case my app was a Spring Boot Application. So I just added exclusions in my Security Config for the paths to the concerned files...

NOTE - This solution is SpringBoot-based... What you may need to do might differ based on what programming language you are using and/or what framework you are utilizing

However the point to note is;

Essentially the problem can be caused when every request, including those for static content are being authenticated.

So let's say some paths to my static content which were causing the errors are as follows;

A path called "plugins"

http://localhost:8080/plugins/styles/css/file-1.css

http://localhost:8080/plugins/styles/css/file-2.css

http://localhost:8080/plugins/js/script-file.js

And a path called "pages"

http://localhost:8080/pages/styles/css/style-1.css

http://localhost:8080/pages/styles/css/style-2.css

http://localhost:8080/pages/js/scripts.js

Then I just add the exclusions as follows in my Spring Boot Security Config;

@Configuration
@EnableGlobalMethodSecurity(prePostEnabled = true)
@Order(SecurityProperties.ACCESS_OVERRIDE_ORDER)
public class SecurityConfig extends WebSecurityConfigurerAdapter {

    @Override
    protected void configure(HttpSecurity http) throws Exception {
        http.authorizeRequests()
            .antMatchers(<comma separated list of other permitted paths>, "/plugins/**", "/pages/**").permitAll()
            // other antMatchers can follow here
    }

}

Cheers!

If it happens, then it means you have to upgrade your node.js. Simply uninstall your current node from your pc or mac and download the latest version from https://nodejs.org/en/

My answer:

set_headless(headless=True) is deprecated. 

https://seleniumhq.github.io/selenium/docs/api/py/webdriver_firefox/selenium.webdriver.firefox.options.html

options.headless = True

works for me

[edit] The lovely chosen jQuery plugin has been bought to my attention, looks like a great alternative to me.

Or if you just want to use jQuery autocomplete, I've extended the combobox example to support defaults and remove the tooltips to give what I think is more expected behaviour. Try it out.

(function ($) {
    $.widget("ui.combobox", {
        _create: function () {
            var input,
              that = this,
              wasOpen = false,
              select = this.element.hide(),
              selected = select.children(":selected"),
              defaultValue = selected.text() || "",
              wrapper = this.wrapper = $("<span>")
                .addClass("ui-combobox")
                .insertAfter(select);

            function removeIfInvalid(element) {
                var value = $(element).val(),
                  matcher = new RegExp("^" + $.ui.autocomplete.escapeRegex(value) + "$", "i"),
                  valid = false;
                select.children("option").each(function () {
                    if ($(this).text().match(matcher)) {
                        this.selected = valid = true;
                        return false;
                    }
                });

                if (!valid) {
                    // remove invalid value, as it didn't match anything
                    $(element).val(defaultValue);
                    select.val(defaultValue);
                    input.data("ui-autocomplete").term = "";
                }
            }

            input = $("<input>")
              .appendTo(wrapper)
              .val(defaultValue)
              .attr("title", "")
              .addClass("ui-state-default ui-combobox-input")
              .width(select.width())
              .autocomplete({
                  delay: 0,
                  minLength: 0,
                  autoFocus: true,
                  source: function (request, response) {
                      var matcher = new RegExp($.ui.autocomplete.escapeRegex(request.term), "i");
                      response(select.children("option").map(function () {
                          var text = $(this).text();
                          if (this.value && (!request.term || matcher.test(text)))
                              return {
                                  label: text.replace(
                                    new RegExp(
                                      "(?![^&;]+;)(?!<[^<>]*)(" +
                                      $.ui.autocomplete.escapeRegex(request.term) +
                                      ")(?![^<>]*>)(?![^&;]+;)", "gi"
                                    ), "<strong>$1</strong>"),
                                  value: text,
                                  option: this
                              };
                      }));
                  },
                  select: function (event, ui) {
                      ui.item.option.selected = true;
                      that._trigger("selected", event, {
                          item: ui.item.option
                      });
                  },
                  change: function (event, ui) {
                      if (!ui.item) {
                          removeIfInvalid(this);
                      }
                  }
              })
              .addClass("ui-widget ui-widget-content ui-corner-left");

            input.data("ui-autocomplete")._renderItem = function (ul, item) {
                return $("<li>")
                  .append("<a>" + item.label + "</a>")
                  .appendTo(ul);
            };

            $("<a>")
              .attr("tabIndex", -1)
              .appendTo(wrapper)
              .button({
                  icons: {
                      primary: "ui-icon-triangle-1-s"
                  },
                  text: false
              })
              .removeClass("ui-corner-all")
              .addClass("ui-corner-right ui-combobox-toggle")
              .mousedown(function () {
                  wasOpen = input.autocomplete("widget").is(":visible");
              })
              .click(function () {
                  input.focus();

                  // close if already visible
                  if (wasOpen) {
                      return;
                  }

                  // pass empty string as value to search for, displaying all results
                  input.autocomplete("search", "");
              });
        },

        _destroy: function () {
            this.wrapper.remove();
            this.element.show();
        }
    });
})(jQuery);

This error may happen when mapping variables you defined in REST definition do not match with @PathVariable names.

Example: Suppose you defined in the REST definition

@GetMapping(value = "/{appId}", produces = "application/json", consumes = "application/json")

Then during the definition of the function, it should be

public ResponseEntity<List> getData(@PathVariable String appId)

This error may occur when you use any other variable other than defined in the REST controller definition with @PathVariable. Like, the below code will raise the error as ID is different than appId variable name:

public ResponseEntity<List> getData(@PathVariable String ID)

1st method

MyTable.objects.filter(pk=some_value).update(field1='some value')

2nd Method

q = MyModel.objects.get(pk=some_value)
q.field1 = 'some value'
q.save()

3rd method

By using get_object_or_404

q = get_object_or_404(MyModel,pk=some_value)
q.field1 = 'some value'
q.save()

4th Method

if you required if pk=some_value exist then update it other wise create new one by using update_or_create.

MyModel.objects.update_or_create(pk=some_value,defaults={'field1':'some value'})

Since curl 7.67.0 (2019-11-06) there is --no-progress-meter, which does exactly this, and nothing else. From the man page:

   --no-progress-meter
         Option to switch off the progress meter output without muting or
         otherwise affecting warning and informational messages like  -s,
         --silent does.

         Note  that  this  is the negated option name documented. You can
         thus use --progress-meter to enable the progress meter again.

         See also -v, --verbose and -s, --silent. Added in 7.67.0.

It's available in Ubuntu =20.04 and Debian =11 (Bullseye).

For a bit of history on curl's verbosity options, you can read Daniel Stenberg's blog post.

import json
row = [1L,[0.1,0.2],[[1234L,1],[134L,2]]]
row_json = json.dumps(row)

This is not a compiler error: the error is coming from the linker. After compilation, the linker will merge the object files resulting from the compilation of each of your translation units (.cpp files).

The linker finds out that you have the same symbol defined multiple times in different translation units, and complains about it (it is a violation of the One Definition Rule).

The reason is most certainly that main.cpp includes client.cpp, and both these files are individually processed by the compiler to produce two separate object files. Therefore, all the symbols defined in the client.cpp translation unit will be defined also in the main.cpp translation unit. This is one of the reasons why you do not usually #include .cpp files.

Put the definition of your class in a separate client.hpp file which does not contain also the definitions of the member functions of that class; then, let client.cpp and main.cpp include that file (I mean #include). Finally, leave in client.cpp the definitions of your class's member functions.

client.h

#ifndef SOCKET_CLIENT_CLASS
#define SOCKET_CLIENT_CLASS
#ifndef BOOST_ASIO_HPP
#include <boost/asio.hpp>
#endif

class SocketClient // Or whatever the name is...
{

// ...

    bool read(int, char*); // Or whatever the name is...

//  ...
};

#endif

client.cpp

#include "Client.h"

// ...

bool SocketClient::read(int, char*)
{
    // Implementation  goes here...
}

// ... (add the definitions for all other member functions)

main.h

#include <iostream>
#include <string>
#include <sstream>
#include <boost/asio.hpp>
#include <boost/thread/thread.hpp>
#include "client.h"
//              ^^ Notice this!

main.cpp

#include "main.h"

If you are looking for just the size of a file:

$ cat $file | wc -c
> 203233

I've seen a web filtering application which does porn image filtering, sorry I can't remember the name. It was pretty prone to false positives however most of the time it was working.

I think main trick is detecting "too much skin on the picture :)

I finally solved the problem!!! You should first set the jre path to system variables by navigating to::

control panel > System and Security > System > Advanced system settings 

Under System variables click on new

Variable name: KEY_PATH
Variable value: C:\Program Files (x86)\Java\jre1.8.0_171\bin

Where Variable value should be the path to your JDK's bin folder.

Then open command prompt and Change directory to the same JDK's bin folder like this

C:\Program Files (x86)\Java\jre1.8.0_171\bin 

then paste,

keytool -list -v -keystore "C:\Users\user\.android\debug.keystore" -alias androiddebugkey -storepass android -keypass android   

NOTE: People are confusing jre and jdk. All I did applied strictly to jre

Use the find command in conjunction with the tar append (-r) option. This way you can add files to an existing tar in a single step, instead of a two pass solution (create list of files, create tar).

find /dir/dir -prune ... -o etc etc.... -exec tar rvf ~/tarfile.tar {} \;

Update (June 2016): I now try to support touch and mouse input on every resolution, since the device landscape is slowly blurring the lines between what things are and aren't touch devices. iPad Pros are touch-only with the resolution of a 13" laptop. Windows laptops now frequently come with touch screens.

Other similar SO answers (see other answer on this question) might have different ways to try to figure out what sort of device the user is using, but none of them are fool-proof. I encourage you to check those answers out if you absolutely need to try to determine the device.

iPhones, for one, ignore the handheld query (Source). And I wouldn't be surprised if other smartphones do, too, for similar reasons.

The current best way that I use to detect a mobile device is to know its width and use the corresponding media query to catch it. That link there lists some popular ones. A quick Google search would yield you any others you might need, I'm sure.

For more iPhone-specific ones (such as Retina display), check out that first link I posted.

Or use this

- (void)insertSubview:(UIView *)view belowSubview:(UIView*)siblingSubview;

as per here

Neither, because both are quite verbose for a very simple task. You can just do:

let result = ({
  1: 'One',
  2: 'Two',
  3: 'Three'
})[opt] ?? 'Default'    // opt can be 1, 2, 3 or anything (default)

This, of course, also works with strings, a mix of both or without a default case:

let result = ({
  'first': 'One',
  'second': 'Two',
  3: 'Three'
})[opt]                // opt can be 'first', 'second' or 3

Explanation:

It works by creating an object where the options/cases are the keys and the results are the values. By putting the option into the brackets you access the value of the key that matches the expression via the bracket notation.

This returns undefined if the expression inside the brackets is not a valid key. We can detect this undefined-case by using the nullish coalescing operator ?? and return a default value.

Example:

console.log('Using a valid case:', ({
  1: 'One',
  2: 'Two',
  3: 'Three'
})[1] ?? 'Default')

console.log('Using an invalid case/defaulting:', ({
  1: 'One',
  2: 'Two',
  3: 'Three'
})[7] ?? 'Default')

.as-console-wrapper {max-height: 100% !important;top: 0;}

I ended up using this:

$('.selectAll').toggle(function() {
  $(this).select();
}, function() {
  $(this).unselect();
});

We had tons of issues here, namely with the proxy support. We ended-up using Pulse: http://www.poweredbypulse.com/

Pulse has built-in support for a few plugin, however, you can add third-party plugin and even local jar file quite easily.

Strangely it does not always use the built-in Eclipse feature, so sometimes when Eclipse become difficult ( like in our case for the proxy business ), you can work-around it with Pulse.

You can set background color to All Scaffolds in application at once.

just set scaffoldBackgroundColor: in ThemeData

 MaterialApp(
      title: 'Flutter Demo',
      theme: new ThemeData(scaffoldBackgroundColor: const Color(0xFFEFEFEF)),
      home: new MyHomePage(title: 'Flutter Demo Home Page'),
    );

Run the command below;

sudo apt-get install python-pip python-dev libpq-dev postgresql postgresql-contrib
pip install psycopg2

After you extract your "selenium-java-.zip" file you need to configure your build path from your IDE. Import all the jar files under "lib" folder and both selenium standalone server & Selenium java version jar files.

Some of more advanced Oracle database features such as session trace do not work properly in Oracle 11g XE 32-bit if installed on Windows 64-bit system. I needed session trace on Windows 7 64-bit.

Apart from that it works well for me in multiple production MS Windows 64-bit systems: Windows Server 2008 R2 and Windows Server 2003 R2.

HTML:

    <form name="foo" action="form.php" method="POST" id="foo">
        <label for="bar">A bar</label>
        <input id="bar" class="inputs" name="bar" type="text" value="" />
        <input type="submit" value="Send" onclick="submitform(); return false;" />
    </form>

JavaScript:

   function submitform()
   {
       var inputs = document.getElementsByClassName("inputs");
       var formdata = new FormData();
       for(var i=0; i<inputs.length; i++)
       {
           formdata.append(inputs[i].name, inputs[i].value);
       }
       var xmlhttp;
       if(window.XMLHttpRequest)
       {
           xmlhttp = new XMLHttpRequest;
       }
       else
       {
           xmlhttp = new ActiveXObject("Microsoft.XMLHTTP");
       }
       xmlhttp.onreadystatechange = function()
       {
          if(xmlhttp.readyState == 4 && xmlhttp.status == 200)
          {

          }
       }
       xmlhttp.open("POST", "insert.php");
       xmlhttp.send(formdata);
   }

In Solaris OS I used this command:

$ who am i     # Remember to use it with space.

On Linux- Someone already answered this in comments.

$ whoami       # Without space

In Dojo 1.7 or newer, use domConstruct.empty(String|DomNode):

require(["dojo/dom-construct"], function(domConstruct){
  // Empty node's children byId:
  domConstruct.empty("someId");
});

In older Dojo, use dojo.empty(String|DomNode) (deprecated at Dojo 1.8):

dojo.empty( id or DOM node );

Each of these empty methods safely removes all children of the node.

If the you know the times will be less than an hour, you could just use the date() or $date->format() functions.

$minsandsecs = date('i:s',$numberofsecs);

This works because the system epoch time begins at midnight (on 1 Jan 1970, but that's not important for you).

If it's an hour or more but less than a day, you could output it in hours:mins:secs format with `

$hoursminsandsecs = date('H:i:s',$numberofsecs);

For more than a day, you'll need to use modulus to calculate the number of days, as this is where the start date of the epoch would become relevant.

Hope that helps.

Merged Chuck Norris's answer w/ Paulo Mendonça's using extensions methods:

/// <summary>
/// Replace a string char at index with another char
/// </summary>
/// <param name="text">string to be replaced</param>
/// <param name="index">position of the char to be replaced</param>
/// <param name="c">replacement char</param>
public static string ReplaceAtIndex(this string text, int index, char c)
{
    var stringBuilder = new StringBuilder(text);
    stringBuilder[index] = c;
    return stringBuilder.ToString();
}

It is purely a string:

startInfo.Arguments = "-sk server -sky exchange -pe -n CN=localhost -ir LocalMachine -is Root -ic MyCA.cer -sr LocalMachine -ss My MyAdHocTestCert.cer"

Of course, when arguments contain whitespaces you'll have to escape them using \" \", like:

"... -ss \"My MyAdHocTestCert.cer\""

See MSDN for this.

Here is one possible solution to solve the problem without a library :

public static boolean delete(File file) {

    File[] flist = null;

    if(file == null){
        return false;
    }

    if (file.isFile()) {
        return file.delete();
    }

    if (!file.isDirectory()) {
        return false;
    }

    flist = file.listFiles();
    if (flist != null && flist.length > 0) {
        for (File f : flist) {
            if (!delete(f)) {
                return false;
            }
        }
    }

    return file.delete();
}

The java.net.URI class can help; in the documentation of URL you find

Note, the URI class does perform escaping of its component fields in certain circumstances. The recommended way to manage the encoding and decoding of URLs is to use an URI

Use one of the constructors with more than one argument, like:

URI uri = new URI(
    "http", 
    "search.barnesandnoble.com", 
    "/booksearch/first book.pdf",
    null);
URL url = uri.toURL();
//or String request = uri.toString();

(the single-argument constructor of URI does NOT escape illegal characters)

Only illegal characters get escaped by above code - it does NOT escape non-ASCII characters (see fatih's comment).
The toASCIIString method can be used to get a String only with US-ASCII characters:

URI uri = new URI(
    "http", 
    "search.barnesandnoble.com", 
    "/booksearch/é",
    null);
String request = uri.toASCIIString();

For an URL with a query like http://www.google.com/ig/api?weather=São Paulo, use the 5-parameter version of the constructor:

URI uri = new URI(
        "http", 
        "www.google.com", 
        "/ig/api",
        "weather=São Paulo",
        null);
String request = uri.toASCIIString();

Here is the server Open a stream to the file and send it overnetwork

import java.io.BufferedInputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.net.ServerSocket;
import java.net.Socket;

public class SimpleFileServer {

  public final static int SOCKET_PORT = 5501;
  public final static String FILE_TO_SEND = "file.txt";

  public static void main (String [] args ) throws IOException {
    FileInputStream fis = null;
    BufferedInputStream bis = null;
    OutputStream os = null;
    ServerSocket servsock = null;
    Socket sock = null;
    try {
      servsock = new ServerSocket(SOCKET_PORT);
      while (true) {
        System.out.println("Waiting...");
        try {
          sock = servsock.accept();
          System.out.println("Accepted connection : " + sock);
          // send file
          File myFile = new File (FILE_TO_SEND);
          byte [] mybytearray  = new byte [(int)myFile.length()];
          fis = new FileInputStream(myFile);
          bis = new BufferedInputStream(fis);
          bis.read(mybytearray,0,mybytearray.length);
          os = sock.getOutputStream();
          System.out.println("Sending " + FILE_TO_SEND + "(" + mybytearray.length + " bytes)");
          os.write(mybytearray,0,mybytearray.length);
          os.flush();
          System.out.println("Done.");
        } catch (IOException ex) {
          System.out.println(ex.getMessage()+": An Inbound Connection Was Not Resolved");
        }
        }finally {
          if (bis != null) bis.close();
          if (os != null) os.close();
          if (sock!=null) sock.close();
        }
      }
    }
    finally {
      if (servsock != null)
        servsock.close();
    }
  }
}

Here is the client Recive the file being sent overnetwork

import java.io.BufferedOutputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.Socket;

public class SimpleFileClient {

  public final static int SOCKET_PORT = 5501;
  public final static String SERVER = "127.0.0.1";
  public final static String
       FILE_TO_RECEIVED = "file-rec.txt";

  public final static int FILE_SIZE = Integer.MAX_VALUE;

  public static void main (String [] args ) throws IOException {
    int bytesRead;
    int current = 0;
    FileOutputStream fos = null;
    BufferedOutputStream bos = null;
    Socket sock = null;
    try {
      sock = new Socket(SERVER, SOCKET_PORT);
      System.out.println("Connecting...");

      // receive file
      byte [] mybytearray  = new byte [FILE_SIZE];
      InputStream is = sock.getInputStream();
      fos = new FileOutputStream(FILE_TO_RECEIVED);
      bos = new BufferedOutputStream(fos);
      bytesRead = is.read(mybytearray,0,mybytearray.length);
      current = bytesRead;

      do {
         bytesRead =
            is.read(mybytearray, current, (mybytearray.length-current));
         if(bytesRead >= 0) current += bytesRead;
      } while(bytesRead > -1);

      bos.write(mybytearray, 0 , current);
      bos.flush();
      System.out.println("File " + FILE_TO_RECEIVED
          + " downloaded (" + current + " bytes read)");
    }
    finally {
      if (fos != null) fos.close();
      if (bos != null) bos.close();
      if (sock != null) sock.close();
    }
  }    
}

I recently encountered this problem while working on a contract project(deemed classified). The system in which I had to run the code did not have internet access, for security purposes of course, and so installing dependencies, using composer and npm, was becoming huge pain.

After much deliberation with my colleague, we decided to just wing it and copy paste our dependencies rather than doing composer install or npm install.

This led us to NOT add vendors and npm_modules in gitignore. This is when I encountered this problem.

Changed but not updated:
modified:   vendor/plugins/open_flash_chart_2 (modified content, untracked content)

I googled this a bit and found this helpful thread on SO. Not being too much of a pro in Git, and being a little intoxicated while working on it, I just searched for all the submodules in the vendors folder

find . -name ".git"

This gave me some 4-5 dependencies that had git on them. I removed all these .git folders and voila, it worked. I knows it's hack, and not a very geeky one anyways. O Gods of SO, please forgive me! Next time I promise to read up on gitlinks and obey O mighty Linus Tovalds.

It depends on what you are trying to do with the XML files. If you are just trying to read the XML file (like a configuration file), The Wicked Flea is correct in suggesting SimpleXML since it creates what amounts to nested ArrayObjects. e.g. value will be accessible by $xml->root->child.

If you are looking to manipulate the XML files you're probably best off using DOM XML

foreach (DataColumn col in rightsTable.Columns)
{
     foreach (DataRow row in rightsTable.Rows)
     {
          Console.WriteLine(row[col.ColumnName].ToString());           
     }
} 

For me, adding the following block of code under <dependency management><dependencies> solved the problem.

<dependency>
    <groupId>org.glassfish</groupId>
    <artifactId>javax.el</artifactId>
    <version>3.0.1-b06</version>
</dependency>

You can use within <td> tag css : display:inline-block

Like: <td style="display:inline-block">

I had this issue while testing software. Drivers were not signed.

Tip for me was: in cmd line: (administrator) bcdedit /set TESTSIGNING ON and reboot the machine (shutdown -r -t 5)

Because the SCHEDULER_ADMIN role is a powerful role allowing a grantee to execute code as any user, you should consider granting individual Scheduler system privileges instead. Object and system privileges are granted using regular SQL grant syntax. An example is if the database administrator issues the following statement:

GRANT CREATE JOB TO scott;

After this statement is executed, scott can create jobs, schedules, or programs in his schema.

copied from http://docs.oracle.com/cd/B19306_01/server.102/b14231/schedadmin.htm#i1006239

Using Bootstrap

Remove form-control-file Class from input field to avoid unwanted horizontal scroll bar

Try this!!

$('#upload').change(function() {_x000D_
    var filename = $('#upload').val();_x000D_
    if (filename.substring(3,11) == 'fakepath') {_x000D_
        filename = filename.substring(12);_x000D_
    } // For Remove fakepath_x000D_
    $("label[for='file_name'] b").html(filename);_x000D_
    $("label[for='file_default']").text('Selected File: ');_x000D_
    if (filename == "") {_x000D_
        $("label[for='file_default']").text('No File Choosen');_x000D_
    }_x000D_
});

.custom_file {_x000D_
  margin: auto;_x000D_
  opacity: 0;_x000D_
  position: absolute;_x000D_
  z-index: -1;_x000D_
}

<link href="https://stackpath.bootstrapcdn.com/bootstrap/4.1.3/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<div class="form-group">_x000D_
   <label for="upload" class="btn btn-sm btn-primary">Upload Image</label>_x000D_
    <input type="file" class="text-center form-control-file custom_file" id="upload" name="user_image">_x000D_
    <label for="file_default">No File Choosen </label>_x000D_
    <label for="file_name"><b></b></label>_x000D_
</div>

The current answer is outdated. Here's the up-to-date flow:

The approach outlined here still works (10.12.2020) as confirmed by alexwhan.

We will use the YouTube Data API for our example. Make changes accordingly.

Make sure you have enabled your desired API for your project.

Create the OAuth 2.0 Client

1. Visit https://console.cloud.google.com/apis/credentials
2. Click on CREATE CREDENTIALS
3. Select OAuth client ID
4. For Application Type choose Web Application
5. Add a name
6. Add following URI for Authorized redirect URIs

https://oauth.pstmn.io/v1/callback

7. Click Save
8. Click on the OAuth client you just generated
9. In the Topbar click on DOWNLOAD JSON and save the file somewhere on your machine.

We will use the file later to authenticate Postman.

Authorize Postman via OAuth 2.0 Client

1. In the Auth tab under TYPE choose OAuth 2.0
2. For Access Token enter the Access Token found inside the client_secret_[YourClientID].json file we downloaded in step 9
3. Click on Get New Access Token
4. Make sure your settings are as follows:

Click here to see the settings

You can find everything else you need in your .json file.

5. Click on Request Token
6. A new browser tab/window will open
7. Once the browser tab opens, login via the appropriate Google account
8. Accept the consent screen
9. Done

Ignore the browser message "Not safe" etc. This will be shown until your app has been screened by Google officials. In this case it will always be shown since Postman is the app.

char ch = 't';
char chArray[2];
sprintf(chArray, "%c", ch);
char chOutput[10]="tes";
strcat(chOutput, chArray);
cout<<chOutput;

OUTPUT:

test

There are several ways to do this:

A simple way is using the os module:

import os
os.system("ls -l")

More complex things can be achieved with the subprocess module: for example:

import subprocess
test = subprocess.Popen(["ping","-W","2","-c", "1", "192.168.1.70"], stdout=subprocess.PIPE)
output = test.communicate()[0]

Open the gradle.properties and add the following line:

android.enableAapt2=false

Reference: https://github.com/chrisjenx/Calligraphy/issues/417#issuecomment-365177808

I got the same use case today(31/07/2018) and found this to be a workaround. It is based on my research and it worked for me. Expectation - To achieve the following in TypeScript:

var myStaticClass = {
    property: 10,
    method: function(){} 
}

I did this:

//MyStaticMembers.ts
namespace MyStaticMembers {
        class MyStaticClass {
           static property: number = 10;
           static myMethod() {...}
        }
        export function Property(): number {
           return MyStaticClass.property;
        }
        export function Method(): void {
           return MyStaticClass.myMethod();
        }
     }

Hence we shall consume it as below:

//app.ts
/// <reference path="MyStaticMembers.ts" />
    console.log(MyStaticMembers.Property);
    MyStaticMembers.Method();

This worked for me. If anyone has other better suggestions please let us all hear it !!! Thanks...

Firefox 3 doesn't seem to have a problem with huge numbers.

1e+200 * 1e+100 will calculate fine to 1e+300.

Safari seem to have no problem with it as well. (For the record, this is on a Mac if anyone else decides to test this.)

Unless I lost my brain at this time of day, this is way bigger than a 64-bit integer.

pls try this,

$('#select_id option[value="'+value+'"]').attr("disabled", true);

Try just removing trailing spaces and tabs:

[ \t]+$

_{Both the two most upvoted answers are wrong. It should have nothing to do with "store different/multiple languages". You can support Spanish characters like ñ and English, with just common varchar field and Latin1_General_CI_AS COLLATION, e.g.}

Short Version
You should use NVARCHAR/NCHAR whenever the ENCODING, which is determined by COLLATION of the field, doesn't support the characters needed.
Also, depending on the SQL Server version, you can use specific COLLATIONs, like Latin1_General_100_CI_AS_SC_UTF8 which is available since SQL Server 2019. Setting this collation on a VARCHAR field (or entire table/database), will use UTF-8 ENCODING for storing and handling the data on that field, allowing fully support UNICODE characters, and hence any languages embraced by it.

To FULLY UNDERSTAND:
_{To fully understand what I'm about to explain, it's mandatory to have the concepts of UNICODE, ENCODING and COLLATION all extremely clear in your head. If you don't, then first take a look below at my humble and simplified explanation on "What is UNICODE, ENCODING, COLLATION and UTF-8, and how they are related" section and supplied documentation links. Also, everything I say here is specific to Microsoft SQL Server, and how it stores and handles data in char/nchar and varchar/nvarchar fields.}

Let's say we wanna store a peculiar text on our MSSQL Server database. It could be an Instagram comment as "I love stackoverflow! ".
The plain English part would be perfectly supported even by ASCII, but since there are also an emoji, which is a character specified in the UNICODE standard, we need an ENCODING that supports this Unicode character.

MSSQL Server uses the COLLATION to determine what ENCODING is used on char/nchar/varchar/nvarchar fields. So, differently than a lot think, COLLATION is not only about sorting and comparing data, but also about ENCODING, and by consequence: how our data will be stored!

So, HOW WE KNOW WHAT IS THE ENCODING USED BY OUR COLLATION? With this:

SELECT COLLATIONPROPERTY( 'Latin1_General_CI_AI' , 'CodePage' ) AS [CodePage]
--returns 1252

This simple SQL returns the Windows Code Page for a COLLATION. A Windows Code Page is nothing more than another mapping to ENCODINGs. For the Latin1_General_CI_AI COLLATION it returns the Windows Code Page code 1252 , that maps to Windows-1252 ENCODING.
So, for a varchar column, with Latin1_General_CI_AI COLLATION, this field will handle its data using the Windows-1252 ENCODING, and only correctly store characters supported by this encoding.

If we check the Windows-1252 ENCODING specification Character List for Windows-1252, we will find out that this encoding won't support our emoji character. And if we still try it out:

OK, SO HOW CAN WE SOLVE THIS?? Actually, it depends, and that is GOOD!

NCHAR/NVARCHAR

Before SQL Server 2019 all we had was NCHAR and NVARCHAR fields. Some say they are UNICODE fields. THAT IS WRONG!. Again, it depends on the field's COLLATION and also SQLServer Version. Microsoft's "nchar and nvarchar (Transact-SQL)" documentation specifies perfectly:

Starting with SQL Server 2012 (11.x), when a Supplementary Character (SC) enabled collation is used, these data types store the full range of Unicode character data and use the UTF-16 character encoding. If a non-SC collation is specified, then these data types store only the subset of character data supported by the UCS-2 character encoding.

In other words, if we use SQL Server older that 2012, like SQL Server 2008 R2 for example, the ENCODING for those fields will use UCS-2 ENCODING which support a subset of UNICODE. But if we use SQL Server 2012 or newer, and define a COLLATION that has Supplementary Character enabled, than with our field will use the UTF-16 ENCODING, that fully supports UNICODE.

BUT WHAIT, THERE IS MORE! WE CAN USE UTF-8 NOW!!

CHAR/VARCHAR

Starting with SQL Server 2019, WE CAN USE CHAR/VARCHAR fields and still fully support UNICODE using UTF-8 ENCODING!!!

From Microsoft's "char and varchar (Transact-SQL)" documentation:

Starting with SQL Server 2019 (15.x), when a UTF-8 enabled collation is used, these data types store the full range of Unicode character data and use the UTF-8 character encoding. If a non-UTF-8 collation is specified, then these data types store only a subset of characters supported by the corresponding code page of that collation.

Again, in other words, if we use SQL Server older that 2019, like SQL Server 2008 R2 for example, we need to check the ENCODING using the method explained before. But if we use SQL Server 2019 or newer, and define a COLLATION like Latin1_General_100_CI_AS_SC_UTF8, then our field will use UTF-8 ENCODING which is by far the most used and efficient encoding that supports all the UNICODE characters.

Bonus Information:

Regarding the OP's observation on "I have seen that most of the European languages (German, Italian, English, ...) are fine in the same database in VARCHAR columns", I think it's nice to know why it is:

For the most common COLLATIONs, like the default ones as Latin1_General_CI_AI or SQL_Latin1_General_CP1_CI_AS the ENCODING will be Windows-1252 for varchar fields. If we take a look on it's documentation, we can see that it supports:

English, Irish, Italian, Norwegian, Portuguese, Spanish, Swedish. Plus also German, Finnish and French. And Dutch except the ? character

But as I said before, it's not about language, it's about what characters do you expect to support/store, as shown in the emoji example, or some sentence like "The electric resistance of a lithium battery is 0.5O" where we have again plain English, and a Greek letter/character "omega" (which is the symbol for resistance in ohms), which won't be correctly handled by Windows-1252 ENCODING.

Conclusion:

So, there it is! When use char/nchar and varchar/nvarchar depends on the characters that you want to support, and also the version of your SQL Server that will determines which COLLATIONs and hence the ENCODINGs you have available.

What is UNICODE, ENCODING, COLLATION and UTF-8, and how they are related
_{Note: all the explanations below are simplifications. Please, refer to the supplied documentation links to know all the details about those concepts.}

• UNICODE - Is a standard, a convention, that aims to regulate all the characters in a unified and organized table. In this table, every character has an unique number. This number is commonly called character's code point.
  UNICODE IS NOT AN ENCODING!

• ENCODING - Is a mapping between a character and a byte/bytes sequence. So a encoding is used to "transform" a character to bytes and also the other way around, from bytes to a character. Among the most popular ones are UTF-8, ISO-8859-1, Windows-1252 and ASCII. You can think of it as a "conversion table" (i really simplified here).

• COLLATION - That one is important. Even Microsoft's documentation doesn't let this clear as it should be. A Collation specifies how your data would be sorted, compared, AND STORED!. Yeah, I bet you was not expecting for that last one, right!? The collations on SQL Server determines too what would be the ENCODING used on that particular char/nchar/varchar/nvarchar field.

• ASCII ENCODING - Was one of the firsts encodings. It is both the character table (like an own tiny version of UNICODE) and its byte mappings. So it doesn't map a byte to UNICODE, but map a byte to its own character's table. Also, it always use only 7bits, and supported 128 different characters. It was enough to support all English letters upper and down cased, numbers, punctuation and some other limited number of characters. The problem with ASCII is that since it only used 7bits and almost every computer was 8bits at the time, there were another 128 possibilities of characters to be "explored", and everybody started to map this "available" bytes to its own table of characters, creating a lot of different ENCODINGs.

• UTF-8 ENCODING - This is another ENCODING, one of the most (if not the most) used ENCODING around. It uses variable byte width (one character can be from 1 to 6 bytes long, by specification) and fully supports all UNICODE characters.

• Windows-1252 ENCODING - Also one of the most used ENCODING, it's widely used on SQL Server. It's fixed-size, so every one character is always 1byte. It also supports a lot of accents, from various languages but doesn't support all existing, nor supports UNICODE. That's why your varchar field with a common collation like Latin1_General_CI_AS supports á,é,ñ characters, even that it isn't using a supportive UNICODE ENCODING.

Resources:
https://blog.greglow.com/2019/07/25/sql-think-that-varchar-characters-if-so-think-again/
https://medium.com/@apiltamang/unicode-utf-8-and-ascii-encodings-made-easy-5bfbe3a1c45a
https://www.johndcook.com/blog/2019/09/09/how-utf-8-works/
https://www.w3.org/International/questions/qa-what-is-encoding

https://en.wikipedia.org/wiki/List_of_Unicode_characters
https://www.fileformat.info/info/charset/windows-1252/list.htm

https://docs.microsoft.com/en-us/sql/t-sql/data-types/char-and-varchar-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/t-sql/data-types/nchar-and-nvarchar-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/t-sql/statements/windows-collation-name-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/t-sql/statements/sql-server-collation-name-transact-sql?view=sql-server-ver15
https://docs.microsoft.com/en-us/sql/relational-databases/collations/collation-and-unicode-support?view=sql-server-ver15#SQL-collations

SQL Server default character encoding
https://en.wikipedia.org/wiki/Windows_code_page

I would recommend the approach mentioned by Stefan (i.e. follow the guidelines in Improved Persistent Login Cookie Best Practice) and also recommend that you make sure your cookies are HttpOnly cookies so they are not accessible to, potentially malicious, JavaScript.

Give the UL an ID and use the getElementById function:

<html>
<body>
    <script>
    function toggledisplay(elementID)
    {
        (function(style) {
            style.display = style.display === 'none' ? '' : 'none';
        })(document.getElementById(elementID).style);
    }
    </script>

<a href="#" title="Show Tags" onClick="toggledisplay('changethis');">Show All Tags</a>
<ul class="subforums" id="changethis" style="overflow-x: visible; overflow-y: visible; ">
    <li>Item 1</li>
    <li>Item 2</li>
    <li>Item 3</li>
</ul>

</body>
</html>

Following a Google...

Taking the code from the website:

CREATE TABLE CRLF
    (
        col1 VARCHAR(1000)
    )

INSERT CRLF SELECT 'The quick brown@'
INSERT CRLF SELECT 'fox @jumped'
INSERT CRLF SELECT '@over the '
INSERT CRLF SELECT 'log@'

SELECT col1 FROM CRLF

Returns:

col1
-----------------
The quick brown@
fox @jumped
@over the
log@

(4 row(s) affected)


UPDATE CRLF
SET col1 = REPLACE(col1, '@', CHAR(13))

Looks like it can be done by replacing a placeholder with CHAR(13)

Good question, never done it myself :)

You can also set the tableview's bounces property to NO. This will keep the section headers non-floating/static, but then you also lose the bounce property of the tableview.

The solution is:

$(document).ready(function(){
    $("#date_pretty").datepicker({ 
    });
    var myDate = new Date();
    var month = myDate.getMonth() + 1;
    var prettyDate = month + '/' + myDate.getDate() + '/' + myDate.getFullYear();
    $("#date_pretty").val(prettyDate);
});

Thanks grayghost!

You should define source code encoding, add this to the top of your script:

# -*- coding: utf-8 -*-

The reason why it works differently in console and in the IDE is, likely, because of different default encodings set. You can check it by running:

import sys
print sys.getdefaultencoding()

Also see:

• Why declare unicode by string in python?
• Changing default encoding of Python?
• Correct way to define Python source code encoding

@JayGuilford's answer is a good one, but if you don't want a JS dependency, you could use a submit element and simply hide it using display: none;.

You can use a much simpler formula. I just created a new workbook to test it.

Column A = Date1 | Column B = Date2 | Column C = Date3

Highlight Column A and enter the conditional formatting formula:

=AND(A1>B1,A1<C1)

I have scopes for this, hope it help somebody. https://laravel.com/docs/master/eloquent#local-scopes

public function scopeWhereLike($query, $column, $value)
{
    return $query->where($column, 'like', '%'.$value.'%');
}

public function scopeOrWhereLike($query, $column, $value)
{
    return $query->orWhere($column, 'like', '%'.$value.'%');
}

Usage:

$result = BookingDates::whereLike('email', $email)->orWhereLike('name', $name)->get();

git reset --hard make changes, then do

git add -A
git commit --amend --no-edit 

git add -A
git commit --amend -m "commit_message"

git push origin master --force

--force will rewrite that commit you've reseted to in the first step.

Don't do this, because you're about to go against the whole idea of VCS systems and git in particular. The only good method is to create new and delete unneeded branch. See git help branch for info.

If your button weren't floated, you could use vertical-align:middle; to center the text inside it. After lots of experimentation, this was the only solution I could find that worked in IE without changing markup. (in Chrome, button text seems to be automatically centered without this hack).

But you use a float:left which forces the element to be a block element (your display:inline-block is ignored), whcih in turn prevents vertical-align from working because vertical-align doesn't work inside a block element.

So you have three choices:

• stop using floats in this form, and use inline and inline-block elements to simulate floating.
• as @stefan notes above, use another element like an <a> and use javascript to submit the form.
• accept that in IE your buttons will be off by 1px vertically.

Welcome to input associative array 2.0!

    clear
    echo "Welcome to input associative array 2.0! (Spaces in keys and values now supported)"
    unset array
    declare -A array
    read -p 'Enter number for array size: ' num
    for (( i=0; i < num; i++ ))
        do
            echo -n "(pair $(( $i+1 )))"
            read -p ' Enter key: ' k
            read -p '         Enter value: ' v
            echo " "
            array[$k]=$v
        done
    echo " "
    echo "The keys are: " ${!array[@]}
    echo "The values are: " ${array[@]}
    echo " "
    echo "Key <-> Value"
    echo "-------------"
    for i in "${!array[@]}"; do echo $i "<->" ${array[$i]}; done
    echo " "
    echo "Thanks for using input associative array 2.0!"

Output:

Welcome to input associative array 2.0! (Spaces in keys and values now supported)
Enter number for array size: 4
(pair 1) Enter key: Key Number 1
         Enter value: Value#1

(pair 2) Enter key: Key Two
         Enter value: Value2

(pair 3) Enter key: Key3
         Enter value: Val3

(pair 4) Enter key: Key4
         Enter value: Value4


The keys are:  Key4 Key3 Key Number 1 Key Two
The values are:  Value4 Val3 Value#1 Value2

Key <-> Value
-------------
Key4 <-> Value4
Key3 <-> Val3
Key Number 1 <-> Value#1
Key Two <-> Value2

Thanks for using input associative array 2.0!

Input associative array 1.0

(keys and values that contain spaces are not supported)

    clear
    echo "Welcome to input associative array! (written by mO extraordinaire!)"
    unset array
    declare -A array
    read -p 'Enter number for array size: ' num
    for (( i=0; i < num; i++ ))
        do
            read -p 'Enter key and value separated by a space: ' k v
            array[$k]=$v
        done
    echo " "
    echo "The keys are: " ${!array[@]}
    echo "The values are: " ${array[@]}
    echo " "
    echo "Key <-> Value"
    echo "-------------"
    for i in ${!array[@]}; do echo $i "<->" ${array[$i]}; done
    echo " "
    echo "Thanks for using input associative array!"

Output:

Welcome to input associative array! (written by mO extraordinaire!)
Enter number for array size: 10
Enter key and value separated by a space: a1 10
Enter key and value separated by a space: b2 20
Enter key and value separated by a space: c3 30
Enter key and value separated by a space: d4 40
Enter key and value separated by a space: e5 50
Enter key and value separated by a space: f6 60
Enter key and value separated by a space: g7 70
Enter key and value separated by a space: h8 80
Enter key and value separated by a space: i9 90
Enter key and value separated by a space: j10 100

The keys are:  h8 a1 j10 g7 f6 e5 d4 c3 i9 b2
The values are:  80 10 100 70 60 50 40 30 90 20

Key <-> Value
-------------
h8 <-> 80
a1 <-> 10
j10 <-> 100
g7 <-> 70
f6 <-> 60
e5 <-> 50
d4 <-> 40
c3 <-> 30
i9 <-> 90
b2 <-> 20

Thanks for using input associative array!

In simple terms :

Static polymorphism : Same method name is overloaded with different type or number of parameters in same class (different signature). Targeted method call is resolved at compile time.

Dynamic polymorphism: Same method is overridden with same signature in different classes. Type of object on which method is being invoked is not known at compile time but will be decided at run time.

Generally overloading won't be considered as polymorphism.

From java tutorial page :

Subclasses of a class can define their own unique behaviors and yet share some of the same functionality of the parent class

if you're using php jquery, this might help:

   $.ajax({
        url:'phpmd5file.php',
        data:{'mypassword',mypassword},
        dataType:"json",
        method:"POST",
        success:function(mymd5password){
            alert(mymd5password);
        }
    });

on your phpmd5.php file:

echo json_encode($_POST["mypassword"]);

no jsplugins needed. just use ajax and let php md5() do the job.

If you want to see all indexes across all databases all at once:

use information_schema;
SELECT * FROM statistics;

Update Mar 20, 2017 for Swift 3 syntax:

If you don't care whether the optional method exists, just call delegate?.optionalMethod?()

Otherwise, using guard is probably the best approach:

weak var delegate: SomeDelegateWithOptionals?

func someMethod() {
    guard let method = delegate?.optionalMethod else {
        // optional not implemented
        alternativeMethod()
        return
    }
    method()
}

Original answer:

You can use the "if let" approach to test an optional protocol like this:

weak var delegate: SomeDelegateWithOptionals?

func someMethod() {
  if let delegate = delegate {
    if let theMethod = delegate.theOptionalProtocolMethod? {
      theMethod()
      return
    }
  }
  // Reaching here means the delegate doesn't exist or doesn't respond to the optional method
  alternativeMethod()
}

Maybe you want to try this: https://bootstrap-datepicker.readthedocs.org/en/latest/index.html

It's a flexible datepicker widget in the Bootstrap style.

Just for fun, I wanted to build off of Ian Henry's answer.

Of course var array = new Array(N); will give you an array of size N, but the keys and values will be identical.... then to shorten the array to size M, use array.length = M.... but for some added functionality try:

function range()
{
    // This function takes optional arguments:
    // start, end, increment
    //    start may be larger or smaller than end
    // Example:  range(null, null, 2);

    var array = []; // Create empty array

      // Get arguments or set default values:
    var start = (arguments[0] ? arguments[0] : 0);
    var end   = (arguments[1] ? arguments[1] : 9);
      // If start == end return array of size 1
    if (start == end) { array.push(start); return array; }
    var inc   = (arguments[2] ? Math.abs(arguments[2]) : 1);

    inc *= (start > end ? -1 : 1); // Figure out which direction to increment.

      // Loop ending condition depends on relative sizes of start and end
    for (var i = start; (start < end ? i <= end : i >= end) ; i += inc)
        array.push(i);

    return array;
}

var foo = range(1, -100, 8.5)

for(var i=0;i<foo.length;i++){
  document.write(foo[i] + ' is item: ' + (i+1) + ' of ' + foo.length + '<br/>'); 
}?

Output of the above:

1 is item: 1 of 12
-7.5 is item: 2 of 12
-16 is item: 3 of 12
-24.5 is item: 4 of 12
-33 is item: 5 of 12
-41.5 is item: 6 of 12
-50 is item: 7 of 12
-58.5 is item: 8 of 12
-67 is item: 9 of 12
-75.5 is item: 10 of 12
-84 is item: 11 of 12
-92.5 is item: 12 of 12

jsFiddle example

This function makes use of the automatically generated arguments array.

The function creates an array filled with values beginning at start and ending at end with increments of size increment, where

range(start, end, increment);

Each value has a default and the sign of the increment doesn't matter, since the direction of incrementation depends on the relative sizes of start and end.

After trying multiple things,what really worked was: 1. downloading "poi" and "poi-ooxml" manually 2.Adding these d/w jars into "Maven Dependencies"

There are two options. The first (and better) one is using the Fetch as Google option in Webmaster Tools that Mike Flynn commented about. Here are detailed instructions:

1. Go to: https://www.google.com/webmasters/tools/ and log in
2. If you haven't already, add and verify the site with the "Add a Site" button
3. Click on the site name for the one you want to manage
4. Click Crawl -> Fetch as Google
5. Optional: if you want to do a specific page only, type in the URL
6. Click Fetch
7. Click Submit to Index
8. Select either "URL" or "URL and its direct links"
9. Click OK and you're done.

With the option above, as long as every page can be reached from some link on the initial page or a page that it links to, Google should recrawl the whole thing. If you want to explicitly tell it a list of pages to crawl on the domain, you can follow the directions to submit a sitemap.

Your second (and generally slower) option is, as seanbreeden pointed out, submitting here: http://www.google.com/addurl/

Update 2019:

1. Login to - Google Search Console
2. Add a site and verify it with the available methods.
3. After verification from the console, click on URL Inspection.
4. In the Search bar on top, enter your website URL or custom URLs for inspection and enter.
5. After Inspection, it'll show an option to Request Indexing
6. Click on it and GoogleBot will add your website in a Queue for crawling.

The easiest way is to redirect the output of the echo by >>:

echo 'VNCSERVERS="1:root"' >> /etc/sysconfig/configfile
echo 'VNCSERVERARGS[1]="-geometry 1600x1200"' >> /etc/sysconfig/configfile

The '-Wait' option seemed to block for me even though my process had finished.

I tried Adrian's solution and it works. But I used Wait-Process instead of relying on a side effect of retrieving the process handle.

So:

$proc = Start-Process $msbuild -PassThru
Wait-Process -InputObject $proc

if ($proc.ExitCode -ne 0) {
    Write-Warning "$_ exited with status code $($proc.ExitCode)"
}

In Visual Studio 2019, this can also be configured in Tools -> Options -> General -> View whitespace