Because if people can get at your object instance (ie: your this) pointer, then they can also try to lock that same object. Now they might not be aware that you're locking on this internally, so this may cause problems (possibly a deadlock)

In addition to this, it's also bad practice, because it's locking "too much"

For example, you might have a member variable of List<int>, and the only thing you actually need to lock is that member variable. If you lock the entire object in your functions, then other things which call those functions will be blocked waiting for the lock. If those functions don't need to access the member list, you'll be causing other code to wait and slow down your application for no reason at all.

Here is a way to create your Custom Pagination Component from react-bootstrap lib and this component you can use Throughout your project

Your Pagination Component (pagination.jsx or js)

import React, { Component } from "react"; 
import { Pagination } from "react-bootstrap"; 
import PropTypes from "prop-types";

export default class PaginationHandler extends Component {  

   constructor(props) {
    super(props);
    this.state = {
      paging: {
        offset: 0,
        limit: 10
      },
      active: 0
    };  
    }

  pagingHandler = () => {
    let offset = parseInt(event.target.id);
    this.setState({
      active: offset
    });
    this.props.pageHandler(event.target.id - 1);   };

  nextHandler = () => {
    let active = this.state.active;
    this.setState({
      active: active + 1
    });
    this.props.pageHandler(active + 1);   };

  backHandler = () => {
    let active = this.state.active;
    this.setState({
      active: active - 1
    });
    this.props.pageHandler(active - 1);   };

  renderPageNumbers = (pageNumbers, totalPages) => {
    let { active } = this.state;
    return (
      <Pagination>
        <Pagination.Prev disabled={active < 5} onClick={ active >5 && this.backHandler} />

        {
      pageNumbers.map(number => {
              if (
                number >= parseInt(active) - 3 &&
                number <= parseInt(active) + 3 
              ) {
                return (
                  <Pagination.Item
                    id={number}
                    active={number == active}
                    onClick={this.pagingHandler}
                  >
                    {number}
                  </Pagination.Item>
                );
              } else {
                return null;
              }
        })}
        <Pagination.Next onClick={ active <= totalPages -4 && this.nextHandler} />
      </Pagination>
    );   };

  buildComponent = (props, state) => {
    const { totalPages } = props;
    const pageNumbers = [];
    for (let i = 1; i <= totalPages; i++) {
      pageNumbers.push(i);
    }
    return (
      <div className="pull-right">
      {this.renderPageNumbers(pageNumbers ,totalPages)}
      </div>
    );   
};

  render() {
    return this.buildComponent(this.props, this.state);
  } 

} 
   PaginationHandler.propTypes = 
   {
    paging: PropTypes.object,
    pageHandler: PropTypes.func,
    totalPages: PropTypes.object 
   };

Use of Above Component in your Component

import Pagination from "../pagination";

pageHandler = (offset) =>{
      this.setState(({ paging }) => ({
        paging: { ...paging, offset: offset }
      }));
   }
   render() {
    return (
      <div>
         <Pagination
          paging = {paging}
          pageHandler = {this.pageHandler}
          totalPages = {totalPages}>
          </Pagination>
      </div>
    );
  }

I am not sure for how long, but I do use git-up now, which takes care of that.

I do git up and it starts to track new branches and deletes the old ones.

Just to make it clear, it is not out-of-box git command — https://github.com/aanand/git-up

BTW it also stashes dirty tree and makes rebases still with just git up.

Hope it'll be useful for someone

We could use tidyr::extract()

x <- c("F.US.CLE.V13", "F.US.CA6.U13", "F.US.CA6.U13", "F.US.CA6.U13", 
  "F.US.CA6.U13", "F.US.CA6.U13", "F.US.CA6.U13", "F.US.CA6.U13", 
  "F.US.DL.U13", "F.US.DL.U13", "F.US.DL.U13", "F.US.DL.Z13", "F.US.DL.Z13"
)


library(tidyr)
extract(tibble(data=x),"data", regex = "^(.*?)\\.(.*?)\\.(.*?)\\.(.*?)$",into = LETTERS[1:4])
#> # A tibble: 13 x 4
#>    A     B     C     D    
#>    <chr> <chr> <chr> <chr>
#>  1 F     US    CLE   V13  
#>  2 F     US    CA6   U13  
#>  3 F     US    CA6   U13  
#>  4 F     US    CA6   U13  
#>  5 F     US    CA6   U13  
#>  6 F     US    CA6   U13  
#>  7 F     US    CA6   U13  
#>  8 F     US    CA6   U13  
#>  9 F     US    DL    U13  
#> 10 F     US    DL    U13  
#> 11 F     US    DL    U13  
#> 12 F     US    DL    Z13  
#> 13 F     US    DL    Z13

Another option is to use unglue::unglue_data()

# remotes::install_github("moodymudskipper/unglue")
library(unglue)
unglue_data(x,"{A}.{B}.{C}.{D}")
#>    A  B   C   D
#> 1  F US CLE V13
#> 2  F US CA6 U13
#> 3  F US CA6 U13
#> 4  F US CA6 U13
#> 5  F US CA6 U13
#> 6  F US CA6 U13
#> 7  F US CA6 U13
#> 8  F US CA6 U13
#> 9  F US  DL U13
#> 10 F US  DL U13
#> 11 F US  DL U13
#> 12 F US  DL Z13
#> 13 F US  DL Z13

^{Created on 2019-09-14 by the reprex package (v0.3.0)}

i was facing the similar issue and i resolved by using following code

$(document).on('click', 'a.page-scroll', function(event) {
        var $anchor = $(this);
        var desiredHeight = $(window).height() - 577;
        $('html, body').stop().animate({
            scrollTop: $($anchor.attr('href')).offset().top - desiredHeight
        }, 1500, 'easeInOutExpo');
        event.preventDefault();
    });

My problem was in my XML lyout I have an android:animateLayoutChanges set to true and I've called notifyDataSetChanged() on the RecyclerView's adapter in the Java code.

So, I've just removed android:animateLayoutChanges from my layout and that resloved my problem.

In angularJS, you can use angular.element which is the lite version of jQuery. You can do pretty much everything with it, so you don't need to include jQuery.

So basically, you can rewrite your code to something like this:

link: function (scope, iElement, iAttrs) {
  var svgTag = angular.element('<svg width="600" height="100" class="svg"></svg>');
  angular.element(svgTag).appendTo(iElement[0]);
  //...
}

A real edge case is where you have used an MySQL tool, (Sequel Pro in my case) to rename a database. Then created a database with the same name.

This kept foreign key constraints to the same database name, so the renamed database (e.g. my_db_renamed) had foreign key constraints in the newly created database (my_db)

Not sure if this is a bug in Sequel Pro, or if some use case requires this behaviour, but it cost me best part of a morning :/

Is it essential that you need a NumPy array? Otherwise you could speed things up by loading the data as a nested list.

def load(fname):
    ''' Load the file using std open'''
    f = open(fname,'r')

    data = []
    for line in f.readlines():
        data.append(line.replace('\n','').split(' '))

    f.close()

    return data

For a text file with 4000x4000 words this is about 10 times faster than loadtxt.

Some shortcut is to create a NumberFormatInfo class, set its NumberDecimalSeparator property to "." and use the class as parameter to ToString() method whenever u need it.

using System.Globalization;

NumberFormatInfo nfi = new NumberFormatInfo();
nfi.NumberDecimalSeparator = ".";

value.ToString(nfi);

Neither restclient nor REST console support this but curl does.

The HTTP specification says in section 4.3

A message-body MUST NOT be included in a request if the specification of the request method (section 5.1.1) does not allow sending an entity-body in requests.

Section 5.1.1 redirects us to section 9.x for the various methods. None of them explicitly prohibit the inclusion of a message body. However...

Section 5.2 says

The exact resource identified by an Internet request is determined by examining both the Request-URI and the Host header field.

and Section 9.3 says

The GET method means retrieve whatever information (in the form of an entity) is identified by the Request-URI.

Which together suggest that when processing a GET request, a server is not required to examine anything other that the Request-URI and Host header field.

In summary, the HTTP spec doesn't prevent you from sending a message-body with GET but there is sufficient ambiguity that it wouldn't surprise me if it was not supported by all servers.

There is no such thing as :touch in the W3C specifications, http://www.w3.org/TR/CSS2/selector.html#pseudo-class-selectors

:active should work, I would think.

Order on the :active/:hover pseudo class is important for it to function correctly.

Here is a quote from that above link

Interactive user agents sometimes change the rendering in response to user actions. CSS provides three pseudo-classes for common cases:

• The :hover pseudo-class applies while the user designates an element (with some pointing device), but does not activate it. For example, a visual user agent could apply this pseudo-class when the cursor (mouse pointer) hovers over a box generated by the element. User agents not supporting interactive media do not have to support this pseudo-class. Some conforming user agents supporting interactive media may not be able to support this pseudo-class (e.g., a pen device).
• The :active pseudo-class applies while an element is being activated by the user. For example, between the times the user presses the mouse button and releases it.
• The :focus pseudo-class applies while an element has the focus (accepts keyboard events or other forms of text input).

At first create a ContentValues object :

ContentValues cv = new ContentValues();
cv.put("Field1","Bob");
cv.put("Field2","19");

Then use the update method. Note, the third argument is the where clause. The "?" is a placeholder. It will be replaced with the fourth argument (id)

myDB.update(MY_TABLE_NAME, cv, "_id = ?", new String[]{id});

This is the cleanest solution to update a specific row.

You should try using Type.IsAssignableFrom instead.

Can you load the GUIDs into a scratch table then do a

... WHERE var IN SELECT guid FROM #scratchtable

Just add the following rules to the parent element:

display: flex;
justify-content: center; /* align horizontal */
align-items: center; /* align vertical */

Here's a sample demo (Resize window to see the image align)

Browser support for Flexbox nowadays is quite good.

For cross-browser compatibility for display: flex and align-items, you can add the older flexbox syntax as well:

display: -webkit-box;
display: -webkit-flex;
display: -moz-box;
display: -ms-flexbox;
display: flex;
-webkit-flex-align: center;
-ms-flex-align: center;
-webkit-align-items: center;
align-items: center;

These are mostly equivalent, but import * has some restrictions that import ... = require doesn't.

import * as creates an identifier that is a module object, emphasis on object. According to the ES6 spec, this object is never callable or newable - it only has properties. If you're trying to import a function or class, you should use

import express = require('express');

or (depending on your module loader)

import express from 'express';

Attempting to use import * as express and then invoking express() is always illegal according to the ES6 spec. In some runtime+transpilation environments this might happen to work anyway, but it might break at any point in the future without warning, which will make you sad.

In system/core/Common.php there is an exception handler, with a block of code that looks like this:

 // We don't bother with "strict" notices since they tend to fill up
 // the log file with excess information that isn't normally very helpful.
if ($severity == E_STRICT)
{
    return;
}

By removing the if and the return and the incorrect comment, I was able to get an error message, instead of just a blank page. This project isn't using the most recent version of CodeIgniter, hopefully they've fixed this bug by now.

you can give an <a> tag the visual behavior of a table cell:

HTML:

<table>
  <tr>
    <a href="...">Cell 1</a>
    <td>Cell 2</td>
  </tr>
</table>

CSS:

tr > a {
  display: table-cell;
}

To truncate a string provided by the maximum limit without breaking a word use this:

/**
 * truncate a string provided by the maximum limit without breaking a word
 * @param string $str
 * @param integer $maxlen
 * @return string
 */
public static function truncateStringWords($str, $maxlen): string
{
    if (strlen($str) <= $maxlen) return $str;

    $newstr = substr($str, 0, $maxlen);
    if (substr($newstr, -1, 1) != ' ') $newstr = substr($newstr, 0, strrpos($newstr, " "));

    return $newstr;
}

PictureBox.Image is a property, not a method. You can set it like this:

PictureBox1.Image = System.Drawing.Image.FromFile(dlg.FileName);

Merger two image png and jpg/png [Image Masking]

//URL or Local path
$src_url = '1.png';
$dest_url = '2.jpg';
$src = imagecreatefrompng($src_url);
$dest1 = imagecreatefromjpeg($dest_url);

//if you want to make same size
list($width, $height) = getimagesize($dest_url);
list($newWidth, $newHeight) = getimagesize($src_url);
$dest = imagecreatetruecolor($newWidth, $newHeight);

imagecopyresampled($dest, $dest1, 0, 0, 0, 0, $newWidth, $newHeight, $width, $height);

list($src_w, $src_h) = getimagesize($src_url);

//merger with same size
$this->imagecopymerge_alpha($dest, $src, 0, 0, 0, 0, $src_w, $src_h, 100);

//show output on browser
header('Content-Type: image/png');
imagejpeg($dest);

imagecopymerge_alpha

function imagecopymerge_alpha($dst_im, $src_im, $dst_x, $dst_y, $src_x, $src_y, $src_w, $src_h, $pct)
    {
        $cut = imagecreatetruecolor($src_w, $src_h);
        imagecopy($cut, $dst_im, 0, 0, $dst_x, $dst_y, $src_w, $src_h);
        imagecopy($cut, $src_im, 0, 0, $src_x, $src_y, $src_w, $src_h);
        imagecopymerge($dst_im, $cut, $dst_x, $dst_y, 0, 0, $src_w, $src_h, $pct);
    }

Borrowing from Michael Jasper's and Jon Hendershot's solutions, I offer the following:

$('address').each(function() {
    var text = $(this).text();

    var q    = $.trim(text).replace(/\r?\n/, ',').replace(/\s+/g, ' ');
    var link = '<a href="http://maps.google.com/maps?q=' + encodeURIComponent(q) + '" target="_blank"></a>';

    return $(this).wrapInner(link);
});

This solution offers the following benefits over solutions previously offered:

• It will not remove HTML tags (e.g. <br> tags) within <address>, so formatting is preserved
• It properly encodes the URL
• It squashes extra spaces so that the generated URL is shorter and cleaner and human-readable after encoding
• It produces valid markup (Mr.Hendershot's solution creates <a><address></address></a> which is invalid because block-level elements such as <address> are not permitted within inline elements such as <a>.

Caveat: If your <address> tag contains block-level elements like <p> or <div>, then this JavaScript code will produce in invalid markup (because the <a> tag will contain those block-level elements). But if you're just doing stuff like this:

<address>
  The White House
  <br>
  1600 Pennsylvania Ave NW
  <br>
  Washington, D.C.  20500
</address>

Then it'll work just fine.

1. Add Admin user with password
2. Go to wwwroot props
3. Give this user a full access to this folder and its children
4. Change the user of the AppPool to the added user using this article http://technet.microsoft.com/en-us/library/cc771170(v=ws.10).aspx
5. Change the User of the website using this article http://techblog.sunsetsurf.co.uk/2010/07/changing-the-user-iis-runs-as-windows-2008-iis-7-5/ Put the same username and password you have created at step (1).

It is working now congrats

You could have an extension of this problem in case of your initial text was set into a string type variable, for example:

function status(){    
  if [ $1 != "stopped" ]; then
     artist="ABC";
     track="CDE";
     album="DEF";
     status_message="The current track is $track at $album by $artist";
     echo $status_message;
     read_status $1 "$status_message";
  fi
}

function read_status(){
  if [ $1 != "playing" ]; then
    echo $2
  fi
}

In this case if you don't pass the status_message variable forward as string (surrounded by "") it will be split in a mount of different arguments.

"$variable": The current track is CDE at DEF by ABC

$variable: The

List<Object> list = new ArrayList();
for (Iterator<Object> iterator = list.iterator(); iterator.hasNext();) {
  Object obj= iterator.next();
    if (obj.getId().equals("1")) {
       // Remove the current element from the iterator and the list.
       iterator.remove();
    }
}

Check out the Eclipse CDT project. It is a plugin for Eclipse geared towards C/C++ development and includes a fairly feature rich debugging perspective (that behind the scenes uses GDB). It is available on a wide variety of platforms.

Make an equals check on the keySet() of both HashMaps.

NOTE:

If your Map contains String keys then it is no problem, but if your Map contains objA type keys then you need to make sure that your class objA implements equals().

run psql -E and then \d student_details

Have you tried using a icon font like http://fortawesome.github.io/Font-Awesome/

Bootstrap comes with their own library, but it doesn't have as many icons as Font Awesome.

http://getbootstrap.com/components/#glyphicons

DateFormatSymbols class provides methods for our ease use.

To get short month strings. For example: "Jan", "Feb", etc.

getShortMonths()

To get month strings. For example: "January", "February", etc.

getMonths()

Sample code to return month string in mmm format,

private static String getShortMonthFromNumber(int month){
    if(month<0 || month>11){
        return "";
    }
    return new DateFormatSymbols().getShortMonths()[month];
}

You can certainly us the a Select Agregation statement as Postulated by Ben James, However This will result in a view with as many columns as you have tables. An alternate method may be as follows:

SELECT COUNT(user_table.id) AS TableCount,'user_table' AS TableSource FROM user_table
UNION SELECT COUNT(cat_table.id) AS TableCount,'cat_table' AS TableSource FROM cat_table
UNION SELECT COUNT(course_table.id) AS TableCount, 'course_table' AS TableSource From course_table;

The Nice thing about an approch like this is that you can explicitly write the Union statements and generate a view or create a temp table to hold values that are added consecutively from a Proc cals using variables in place of your table names. I tend to go more with the latter, but it really depends on personal preference and application. If you are sure the tables will never change, you want the data in a single row format, and you will not be adding tables. stick with Ben James' solution. Otherwise I'd advise flexibility, you can always hack a cross tab struc.

I do not know why, but the image should not be duplicated, tripled, etc ... should remove the previous one and load it again but with another rotation data. This is my code:

data.csv enter image description here

d3.csv("data/data.csv").then(function(data){
//console.log(data);
// Clean data
formattedData = data.map(function(id){
id.rot_1 = +id.rot_1;
        id.trans_1 = +id.trans_1;
        return id;
});
// First run of the visualization
update(formattedData[0]);})

$("#play-button")
.on("click", function(){
    var button = $(this);
    if (button.text() == "Play"){
        button.text("Pause");
        interval = setInterval(step, 1000);            
    }
    else {
        button.text("Play");
        clearInterval(interval);
    }})

function step(){
// At the end of our data, loop back
time = (time < 76) ? time+1 : 0
update(formattedData[time]); }

function update(data) {
// Standard transition time for the visualization
var t = d3.transition()
    .duration(1000);

//console.log(d3.selectAll(data));    
//console.log(data)

// original
var imgs1 = g.append("image") // en vez de g es svg
.attr("xlink:href", "img/picturetest.png");

// EXIT old elements not present in new data.
imgs1.exit()
    .attr("class", "exit")
    .selectAll("svg:image")
    .remove();

//console.log(data)

// ENTER new elements present in new data.
imgs1.enter()
    .append("svg:image") // svg:image
    //.attr("xlink:href", "img/picturetest.png")
    .attr("class", "enter")
    .merge(imgs1)
    .transition(t)
        .attr("x", 0) // 150
        .attr("y", 0) // 80
        .attr("width", 200)
        .attr("height", 200)
        .attr("transform", "rotate("+data.rot_1+") translate("+data.trans_1+")" ); }`

Yes, it is possible!

» JavaScript

if?=()=>!0;_x000D_
var a = 9;_x000D_
_x000D_
if?(a==1 && a== 2 && a==3)_x000D_
{_x000D_
    document.write("<h1>Yes, it is possible!</h1>")_x000D_
}

The above code is a short version (thanks to @Forivin for its note in comments) and the following code is original:

var a = 9;_x000D_
_x000D_
if?(a==1 && a== 2 && a==3)_x000D_
{_x000D_
    //console.log("Yes, it is possible!")_x000D_
    document.write("<h1>Yes, it is possible!</h1>")_x000D_
}_x000D_
_x000D_
//--------------------------------------------_x000D_
_x000D_
function if?(){return true;}

If you just see top side of my code and run it you say WOW, how?

So I think it is enough to say Yes, it is possible to someone that said to you: Nothing is impossible

Trick: I used a hidden character after if to make a function that its name is similar to if. In JavaScript we can not override keywords so I forced to use this way. It is a fake if, but it works for you in this case!

» C#

Also I wrote a C# version (with increase property value technic):

static int _a;
public static int a => ++_a;

public static void Main()
{
    if(a==1 && a==2 && a==3)
    {
        Console.WriteLine("Yes, it is possible!");
    }
}

Live Demo

VS -> Debug -> Attach unity debugger -> double click project

Don't reinvent the wheel. Use json-framework or something similar.

If you do decide to use json-framework, here's how you would parse a JSON string into an NSDictionary:

SBJsonParser* parser = [[[SBJsonParser alloc] init] autorelease];
// assuming jsonString is your JSON string...
NSDictionary* myDict = [parser objectWithString:jsonString];

// now you can grab data out of the dictionary using objectForKey or another dictionary method

Queue<String> qe=new LinkedList<String>();

qe.add("b");
qe.add("a");
qe.add("c");

Since Queue is an interface, you can't create an instance of it as you illustrated

just type "git push" if this doesn't give you a positive replay, then check if you are connected with your repository correctly.

As of ES 7, mapping types have been removed. You can read more details here

If you are using Ruby On Rails this means that you may need to remove document_type from your model or concern.

As an alternative to mapping types one solution is to use an index per document type.

Before:

module Searchable
  extend ActiveSupport::Concern

  included do
    include Elasticsearch::Model
    include Elasticsearch::Model::Callbacks
    index_name [Rails.env, Rails.application.class.module_parent_name.underscore].join('_')
    document_type self.name.downcase
  end
end

After:

module Searchable
  extend ActiveSupport::Concern

  included do
    include Elasticsearch::Model
    include Elasticsearch::Model::Callbacks
    index_name [Rails.env, Rails.application.class.module_parent_name.underscore, self.name.downcase].join('_')
  end
end

Hey there's a useful tutorial on Dot Net pearls: http://www.dotnetperls.com/progressbar

In agreement with Peter, you need to use some amount of threading or the program will just hang, somewhat defeating the purpose.

Example that uses ProgressBar and BackgroundWorker: C#

using System.ComponentModel;
using System.Threading;
using System.Windows.Forms;

namespace WindowsFormsApplication1
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();
        }

        private void Form1_Load(object sender, System.EventArgs e)
        {
            // Start the BackgroundWorker.
            backgroundWorker1.RunWorkerAsync();
        }

        private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
        {
            for (int i = 1; i <= 100; i++)
            {
                // Wait 100 milliseconds.
                Thread.Sleep(100);
                // Report progress.
                backgroundWorker1.ReportProgress(i);
            }
        }

        private void backgroundWorker1_ProgressChanged(object sender, ProgressChangedEventArgs e)
        {
            // Change the value of the ProgressBar to the BackgroundWorker progress.
            progressBar1.Value = e.ProgressPercentage;
            // Set the text.
            this.Text = e.ProgressPercentage.ToString();
        }
    }
} //closing here

Your append line must be in your test() function

EDIT:

Here are two versions:

Version 1: jQuery listener

$(function(){
    $('button').on('click',function(){
        var r= $('<input type="button" value="new button"/>');
        $("body").append(r);
    });
});

DEMO HERE

Version 2: With a function (like your example)

function createInput(){
    var $input = $('<input type="button" value="new button" />');
    $input.appendTo($("body"));
}

DEMO HERE

Note: This one can be done with either .appendTo or with .append.

You can use String#matches method like this:

System.out.printf("Matches - [%s]%n", string.matches("^.*?(item1|item2|item3).*$"));

Here is a way you could do it with dplyr:

library(tidyverse)

numbers <- c(4,23,4,23,5,43,54,56,657,67,67,435,
             453,435,324,34,456,56,567,65,34,435)
ord <- seq(1:(length(numbers)))

df <- data.frame(ord,numbers)

df <- df %>%
  count(numbers)

numbers     n
     <dbl> <int>
 1       4     2
 2       5     1
 3      23     2
 4      34     2
 5      43     1
 6      54     1
 7      56     2
 8      65     1
 9      67     2
10     324     1
11     435     3
12     453     1
13     456     1
14     567     1
15     657     1

Option 1) The quick and easy way (Toolbar only)

Since appcompat-v7-r23 you can use the following attributes directly on your Toolbar or its style:

app:titleTextColor="@color/primary_text"
app:subtitleTextColor="@color/secondary_text"

If your minimum SDK is 23 and you use native Toolbar just change the namespace prefix to android.

In Java you can use the following methods:

toolbar.setTitleTextColor(Color.WHITE);
toolbar.setSubtitleTextColor(Color.WHITE);

These methods take a color int not a color resource ID!

Option 2) Override Toolbar style and theme attributes

layout/xxx.xml

<android.support.v7.widget.Toolbar
    xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:app="http://schemas.android.com/apk/res-auto"
    android:id="@+id/toolbar"
    android:layout_width="match_parent"
    android:layout_height="wrap_content"
    android:minHeight="?attr/actionBarSize"
    android:theme="@style/ThemeOverlay.MyApp.ActionBar"
    app:popupTheme="@style/ThemeOverlay.AppCompat.Light"
    style="@style/Widget.MyApp.Toolbar.Solid"/>

values/styles.xml

<style name="Widget.MyApp.Toolbar.Solid" parent="Widget.AppCompat.ActionBar">
    <item name="android:background">@color/actionbar_color</item>
    <item name="android:elevation" tools:ignore="NewApi">4dp</item>
    <item name="titleTextAppearance">...</item>
</style>

<style name="ThemeOverlay.MyApp.ActionBar" parent="ThemeOverlay.AppCompat.ActionBar">
    <!-- Parent theme sets colorControlNormal to textColorPrimary. -->
    <item name="android:textColorPrimary">@color/actionbar_title_text</item>
</style>

Help! My icons changed color too!

@PeterKnut reported this affects the color of overflow button, navigation drawer button and back button. It also changes text color of SearchView.

Concerning the icon colors: The colorControlNormal inherits from

• android:textColorPrimary for dark themes (white on black)
• android:textColorSecondary for light themes (black on white)

If you apply this to the action bar's theme, you can customize the icon color.

<item name="colorControlNormal">#de000000</item>

There was a bug in appcompat-v7 up to r23 which required you to also override the native counterpart like so:

<item name="android:colorControlNormal" tools:ignore="NewApi">?colorControlNormal</item>

Help! My SearchView is a mess!

Note: This section is possibly obsolete.

Since you use the search widget which for some reason uses different back arrow (not visually, technically) than the one included with appcompat-v7, you have to set it manually in the app's theme. Support library's drawables get tinted correctly. Otherwise it would be always white.

<item name="homeAsUpIndicator">@drawable/abc_ic_ab_back_mtrl_am_alpha</item>

As for the search view text...there's no easy way. After digging through its source I found a way to get to the text view. I haven't tested this so please let me know in the comments if this didn't work.

SearchView sv = ...; // get your search view instance in onCreateOptionsMenu
// prefix identifier with "android:" if you're using native SearchView
TextView tv = sv.findViewById(getResources().getIdentifier("id/search_src_text", null, null));
tv.setTextColor(Color.GREEN); // and of course specify your own color

Bonus: Override ActionBar style and theme attributes

Appropriate styling for a default action appcompat-v7 action bar would look like this:

<!-- ActionBar vs Toolbar. -->
<style name="Widget.MyApp.ActionBar.Solid" parent="Widget.AppCompat.ActionBar.Solid">
    <item name="background">@color/actionbar_color</item> <!-- No prefix. -->
    <item name="elevation">4dp</item> <!-- No prefix. -->
    <item name="titleTextStyle">...</item> <!-- Style vs appearance. -->
</style>

<style name="Theme.MyApp" parent="Theme.AppCompat">
    <item name="actionBarStyle">@style/Widget.MyApp.ActionBar.Solid</item>
    <item name="actionBarTheme">@style/ThemeOverlay.MyApp.ActionBar</item>
    <item name="actionBarPopupTheme">@style/ThemeOverlay.AppCompat.Light</item>
</style>

I am using Android Studio 3.3.

Go to View -> Tools Window -> Device File Explorer. Or you can find it on the Bottom Right corner of the Android Studio.

If the Emulator is running, the Device File Explorer will display the File structure on Emulator Storage.

Here you can right click on a Folder and select "Upload" to place the file

I advice to use Pacestar UML Diagrammer. It helps you generate UML 2.0 diagrams quickly, easily, flexible AND commonly understood notation.

I used it in many projects and I'm very satisfied. And too it doesn't use much of memory and space just 6 Mo of Hard Disk.

And the most feature that I like it very much is that I can copy diagrams from the editor and paste them in MS Word... so when I need to edit a specific diagram, just I click on and it will be opened in the editor and by closing it, the updates had been done in MS Word document.

A bit involved. Easiest would be to refer to this SQL Fiddle I created for you that produces the exact result. There are ways you can improve it for performance or other considerations, but this should hopefully at least be clearer than some alternatives.

The gist is, you get a canonical ranking of your data first, then use that to segment the data into groups, then find an end date for each group, then eliminate any intermediate rows. ROW_NUMBER() and CROSS APPLY help a lot in doing it readably.

EDIT 2019:

The SQL Fiddle does in fact seem to be broken, for some reason, but it appears to be a problem on the SQL Fiddle site. Here's a complete version, tested just now on SQL Server 2016:

CREATE TABLE Source
(
  EmployeeID int,
  DateStarted date,
  DepartmentID int
)

INSERT INTO Source
VALUES
(10001,'2013-01-01',001),
(10001,'2013-09-09',001),
(10001,'2013-12-01',002),
(10001,'2014-05-01',002),
(10001,'2014-10-01',001),
(10001,'2014-12-01',001)


SELECT *, 
  ROW_NUMBER() OVER (PARTITION BY EmployeeID ORDER BY DateStarted) AS EntryRank,
  newid() as GroupKey,
  CAST(NULL AS date) AS EndDate
INTO #RankedData
FROM Source
;

UPDATE #RankedData
SET GroupKey = beginDate.GroupKey
FROM #RankedData sup
  CROSS APPLY 
  (
    SELECT TOP 1 GroupKey
    FROM #RankedData sub 
    WHERE sub.EmployeeID = sup.EmployeeID AND
      sub.DepartmentID = sup.DepartmentID AND
      NOT EXISTS 
        (
          SELECT * 
          FROM #RankedData bot 
          WHERE bot.EmployeeID = sup.EmployeeID AND
            bot.EntryRank BETWEEN sub.EntryRank AND sup.EntryRank AND
            bot.DepartmentID <> sup.DepartmentID
        )
      ORDER BY DateStarted ASC
    ) beginDate (GroupKey);

UPDATE #RankedData
SET EndDate = nextGroup.DateStarted
FROM #RankedData sup
  CROSS APPLY 
  (
    SELECT TOP 1 DateStarted
    FROM #RankedData sub
    WHERE sub.EmployeeID = sup.EmployeeID AND
      sub.DepartmentID <> sup.DepartmentID AND
      sub.EntryRank > sup.EntryRank
    ORDER BY EntryRank ASC
  ) nextGroup (DateStarted);

SELECT * FROM 
(
SELECT *, ROW_NUMBER() OVER (PARTITION BY GroupKey ORDER BY EntryRank ASC) AS GroupRank FROM #RankedData
) FinalRanking
WHERE GroupRank = 1
ORDER BY EntryRank;

DROP TABLE #RankedData
DROP TABLE Source

In year 2011, there's a new service out called "Test Flight", and it addresses this issue directly.

Apple has since bought TestFlight in 2014 and has integrated it into iTunes Connect and App Store Connect.

First of all, if you want it displayed on a PHP form, the medium is HTML and so a new line will be rendered with the <br /> tag. Check the source HTML of the page - you may possibly have the new line rendered just as a line break, in which case your problem is simply one of translating the text for output to a web browser.

Javadoc comments can be automatically appended by using your IDE's autocomplete feature. Try typing /** and hitting Enter to generate a sample Javadoc comment.

 /**
 *
 * @param action          The action to execute.
 * @param args            The exec() arguments.
 * @param callbackContext The callback context used when calling back into JavaScript.
 * @return
 * @throws JSONException
 */

This should work

var IMyTable: Array<keyof IMyTable> = ["id", "title", "createdAt", "isDeleted"];

or

var IMyTable: (keyof IMyTable)[] = ["id", "title", "createdAt", "isDeleted"];

The shorter ones are vectorized, meaning they can return a vector, like this:

((-2:2) >= 0) & ((-2:2) <= 0)
# [1] FALSE FALSE  TRUE FALSE FALSE

The longer form evaluates left to right examining only the first element of each vector, so the above gives

((-2:2) >= 0) && ((-2:2) <= 0)
# [1] FALSE

As the help page says, this makes the longer form "appropriate for programming control-flow and [is] typically preferred in if clauses."

So you want to use the long forms only when you are certain the vectors are length one.

You should be absolutely certain your vectors are only length 1, such as in cases where they are functions that return only length 1 booleans. You want to use the short forms if the vectors are length possibly >1. So if you're not absolutely sure, you should either check first, or use the short form and then use all and any to reduce it to length one for use in control flow statements, like if.

The functions all and any are often used on the result of a vectorized comparison to see if all or any of the comparisons are true, respectively. The results from these functions are sure to be length 1 so they are appropriate for use in if clauses, while the results from the vectorized comparison are not. (Though those results would be appropriate for use in ifelse.

One final difference: the && and || only evaluate as many terms as they need to (which seems to be what is meant by short-circuiting). For example, here's a comparison using an undefined value a; if it didn't short-circuit, as & and | don't, it would give an error.

a
# Error: object 'a' not found
TRUE || a
# [1] TRUE
FALSE && a
# [1] FALSE
TRUE | a
# Error: object 'a' not found
FALSE & a
# Error: object 'a' not found

Finally, see section 8.2.17 in The R Inferno, titled "and and andand".

I had a similar problem in .NET app in Internet Explorer.

I solved the problem adding the certificate (VeriSign Class 3 certificate in my case) to trusted editors certificates.

Go to Internet Options-> Content -> Publishers and import it

You can get the certificate if you export it from:

Internet Options-> Content -> Certificates -> Intermediate Certification Authorities -> VeriSign Class 3 Public Primary Certification Authority - G5

thanks

btnTest_Click(null, null);

Provided that the method isn't using either of these parameters (it's very common not to.)

To be honest though this is icky. If you have code that needs to be called you should follow the following convention:

protected void btnTest_Click(object sender, EventArgs e)
{
   SomeSub();
}

protected void SomeOtherFunctionThatNeedsToCallTheCode()
{
   SomeSub();
}

protected void SomeSub()
{
   // ...
}

In Python, you can't just embed arbitrary Python expressions into literal strings and have it substitute the value of the string. You need to either:

sys.stderr.write("Usage: " + sys.argv[0])

or

sys.stderr.write("Usage: %s" % sys.argv[0])

Also, you may want to consider using the following syntax of print (for Python earlier than 3.x):

print >>sys.stderr, "Usage:", sys.argv[0]

Using print arguably makes the code easier to read. Python automatically adds a space between arguments to the print statement, so there will be one space after the colon in the above example.

In Python 3.x, you would use the print function:

print("Usage:", sys.argv[0], file=sys.stderr)

Finally, in Python 2.6 and later you can use .format:

print >>sys.stderr, "Usage: {0}".format(sys.argv[0])

Confusing messages

These messages are rather misleading and understandably a source of confusion. Older Ubuntu versions used Libav which is a fork of the FFmpeg project. FFmpeg returned in Ubuntu 15.04 "Vivid Vervet".

The fork was basically a non-amicable result of conflicting personalities and development styles within the FFmpeg community. It is worth noting that the maintainer for Debian/Ubuntu switched from FFmpeg to Libav on his own accord due to being involved with the Libav fork.

The real ffmpeg vs the fake one

For a while both Libav and FFmpeg separately developed their own version of ffmpeg.

Libav then renamed their bizarro ffmpeg to avconv to distance themselves from the FFmpeg project. During the transition period the "not developed anymore" message was displayed to tell users to start using avconv instead of their counterfeit version of ffmpeg. This confused users into thinking that FFmpeg (the project) is dead, which is not true. A bad choice of words, but I can't imagine Libav not expecting such a response by general users.

This message was removed upstream when the fake "ffmpeg" was finally removed from the Libav source, but, depending on your version, it can still show up in Ubuntu because the Libav source Ubuntu uses is from the ffmpeg-to-avconv transition period.

In June 2012, the message was re-worded for the package libav - 4:0.8.3-0ubuntu0.12.04.1. Unfortunately the new "deprecated" message has caused additional user confusion.

Starting with Ubuntu 15.04 "Vivid Vervet", FFmpeg's ffmpeg is back in the repositories again.

libav vs Libav

To further complicate matters, Libav chose a name that was historically used by FFmpeg to refer to its libraries (libavcodec, libavformat, etc). For example the libav-user mailing list, for questions and discussions about using the FFmpeg libraries, is unrelated to the Libav project.

How to tell the difference

If you are using avconv then you are using Libav. If you are using ffmpeg you could be using FFmpeg or Libav. Refer to the first line in the console output to tell the difference: the copyright notice will either mention FFmpeg or Libav.

Secondly, the version numbering schemes differ. Each of the FFmpeg or Libav libraries contains a version.h header which shows a version number. FFmpeg will end in three digits, such as 57.67.100, and Libav will end in one digit such as 57.67.0. You can also view the library version numbers by running ffmpeg or avconv and viewing the console output.

If you want to use the real ffmpeg

Ubuntu 15.04 "Vivid Vervet" or newer

The real ffmpeg is in the repository, so you can install it with:

apt-get install ffmpeg

For older Ubuntu versions

Your options are:

• Download a recent Linux build of ffmpeg,
• follow a step-by-step guide to compile ffmpeg,
• or use Doug McMahon's PPA (for Ubuntu 14.04 LTS "Trusty Tahr")

These methods are non-intrusive, reversible, and will not interfere with the system or any repository packages.

Another possible option is to upgrade to Ubuntu 15.04 "Vivid Vervet" or newer and just use ffmpeg from the repository.

Also see

For an interesting blog article on the situation, as well as a discussion about the main technical differences between the projects, see The FFmpeg/Libav situation.

declare @OrderByCmd  nvarchar(2000)
declare @OrderByName nvarchar(100)
declare @OrderByCity nvarchar(100)
set @OrderByName='Name'    
set @OrderByCity='city'
set @OrderByCmd= 'select * from customer Order By '+@OrderByName+','+@OrderByCity+''
EXECUTE sp_executesql @OrderByCmd 

Note: the commit 5e1361c from brian m. carlson (bk2204) (for git 1.9/2.0 Q1 2014) deals with a special case in term of log decoration with tags:

log: properly handle decorations with chained tags

git log did not correctly handle decorations when a tag object referenced another tag object that was no longer a ref, such as when the second tag was deleted.
The commit would not be decorated correctly because parse_object had not been called on the second tag and therefore its tagged field had not been filled in, resulting in none of the tags being associated with the relevant commit.

Call parse_object to fill in this field if it is absent so that the chain of tags can be dereferenced and the commit can be properly decorated.
Include tests as well to prevent future regressions.

Example:

git tag -a tag1 -m tag1 &&
git tag -a tag2 -m tag2 tag1 &&
git tag -d tag1 &&
git commit --amend -m shorter &&
git log --no-walk --tags --pretty="%H %d" --decorate=full

This works for me very well, #DynamicButtonEvent #IOS #Swift #Xcode

func setupButtonMap(){
    let mapButton = UIButton(type: .system)
    mapButton.setImage(#imageLiteral(resourceName: "CreateTrip").withRenderingMode(.alwaysOriginal), for: .normal)
    mapButton.frame = CGRect(x: 0, y: 0, width: 34, height: 34)
    mapButton.contentMode = .scaleAspectFit
    mapButton.backgroundColor = UIColor.clear
    mapButton.addTarget(self, action: #selector(ViewController.btnOpenMap(_:)), for: .touchUpInside)
    navigationItem.leftBarButtonItem = UIBarButtonItem(customView: mapButton)
    }
@IBAction func btnOpenMap(_ sender: Any?) {
    print("Successful")
}

If emails is the pandas dataframe and emails.message the column for email text

## Helper functions
def get_text_from_email(msg):
    '''To get the content from email objects'''
    parts = []
    for part in msg.walk():
        if part.get_content_type() == 'text/plain':
            parts.append( part.get_payload() )
    return ''.join(parts)

def split_email_addresses(line):
    '''To separate multiple email addresses'''
    if line:
        addrs = line.split(',')
        addrs = frozenset(map(lambda x: x.strip(), addrs))
    else:
        addrs = None
    return addrs 

import email
# Parse the emails into a list email objects
messages = list(map(email.message_from_string, emails['message']))
emails.drop('message', axis=1, inplace=True)
# Get fields from parsed email objects
keys = messages[0].keys()
for key in keys:
    emails[key] = [doc[key] for doc in messages]
# Parse content from emails
emails['content'] = list(map(get_text_from_email, messages))
# Split multiple email addresses
emails['From'] = emails['From'].map(split_email_addresses)
emails['To'] = emails['To'].map(split_email_addresses)

# Extract the root of 'file' as 'user'
emails['user'] = emails['file'].map(lambda x:x.split('/')[0])
del messages

emails.head()

select empid,empname,managename,[Management ],cityname  
from employees inner join Managment  
on employees.manageid = Managment.ManageId     
inner join CITY on employees.Cityid=CITY.CityId


id name  managename  managment  cityname
----------------------------------------
1  islam   hamza       it        cairo

I had the same problems, It has been fixed after I re-generate the ssh key inside .ssh folder without naming it (keep it as id_rsa.pub). Then add it again to gitlab ssh key. Everything working fine now.

I had same issue got it fixed. Use below steps to resolve issue in Xcode 6.4.

1. Click on Show project navigator in Navigator window
2. Now Select project immediately below navigator window
3. Select Targets
4. Select Build Phases tab
5. Open Run Script drop-down option
6. Select Run script only when installing checkbox

Now, clean your project (cmd+shift+k) and build your project.

To move a file you could also use Jakarta Commons IOs FileUtils.moveFile

On error it throws an IOException, so when no exception is thrown you know that that the file was moved.

Layout:

<android.support.v7.widget.AppCompatButton
  style="@style/MyButton"
  ...
  />

styles.xml:

<style name="MyButton" parent="Widget.AppCompat.Button.Colored">
  <item name="backgroundTint">@color/button_background_selector</item>
  <item name="android:textColor">@color/button_text_selector</item>
</style>

color/button_background_selector.xml:

<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item android:state_enabled="false" android:color="#555555"/>
    <item android:color="#00ff00"/>
</selector>

color/button_text_selector.xml:

<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item android:state_enabled="false" android:color="#888888"/>
    <item android:color="#ffffff"/>
</selector>

Ok, I don't normally answer my own questions but after a bit of tinkering, I have figured out definitively how Oracle stores the result of a DATE subtraction.

When you subtract 2 dates, the value is not a NUMBER datatype (as the Oracle 11.2 SQL Reference manual would have you believe). The internal datatype number of a DATE subtraction is 14, which is a non-documented internal datatype (NUMBER is internal datatype number 2). However, it is actually stored as 2 separate two's complement signed numbers, with the first 4 bytes used to represent the number of days and the last 4 bytes used to represent the number of seconds.

An example of a DATE subtraction resulting in a positive integer difference:

select date '2009-08-07' - date '2008-08-08' from dual;

Results in:

DATE'2009-08-07'-DATE'2008-08-08'
---------------------------------
                              364

select dump(date '2009-08-07' - date '2008-08-08') from dual;

DUMP(DATE'2009-08-07'-DATE'2008
-------------------------------
Typ=14 Len=8: 108,1,0,0,0,0,0,0

Recall that the result is represented as a 2 seperate two's complement signed 4 byte numbers. Since there are no decimals in this case (364 days and 0 hours exactly), the last 4 bytes are all 0s and can be ignored. For the first 4 bytes, because my CPU has a little-endian architecture, the bytes are reversed and should be read as 1,108 or 0x16c, which is decimal 364.

An example of a DATE subtraction resulting in a negative integer difference:

select date '1000-08-07' - date '2008-08-08' from dual;

Results in:

DATE'1000-08-07'-DATE'2008-08-08'
---------------------------------
                          -368160

select dump(date '1000-08-07' - date '2008-08-08') from dual;

DUMP(DATE'1000-08-07'-DATE'2008-08-0
------------------------------------
Typ=14 Len=8: 224,97,250,255,0,0,0,0

Again, since I am using a little-endian machine, the bytes are reversed and should be read as 255,250,97,224 which corresponds to 11111111 11111010 01100001 11011111. Now since this is in two's complement signed binary numeral encoding, we know that the number is negative because the leftmost binary digit is a 1. To convert this into a decimal number we would have to reverse the 2's complement (subtract 1 then do the one's complement) resulting in: 00000000 00000101 10011110 00100000 which equals -368160 as suspected.

An example of a DATE subtraction resulting in a decimal difference:

select to_date('08/AUG/2004 14:00:00', 'DD/MON/YYYY HH24:MI:SS'
 - to_date('08/AUG/2004 8:00:00', 'DD/MON/YYYY HH24:MI:SS') from dual;

TO_DATE('08/AUG/200414:00:00','DD/MON/YYYYHH24:MI:SS')-TO_DATE('08/AUG/20048:00:
--------------------------------------------------------------------------------
                                                                             .25

The difference between those 2 dates is 0.25 days or 6 hours.

select dump(to_date('08/AUG/2004 14:00:00', 'DD/MON/YYYY HH24:MI:SS')
 - to_date('08/AUG/2004 8:00:00', 'DD/MON/YYYY HH24:MI:SS')) from dual;

DUMP(TO_DATE('08/AUG/200414:00:
-------------------------------
Typ=14 Len=8: 0,0,0,0,96,84,0,0

Now this time, since the difference is 0 days and 6 hours, it is expected that the first 4 bytes are 0. For the last 4 bytes, we can reverse them (because CPU is little-endian) and get 84,96 = 01010100 01100000 base 2 = 21600 in decimal. Converting 21600 seconds to hours gives you 6 hours which is the difference which we expected.

Hope this helps anyone who was wondering how a DATE subtraction is actually stored.

You get the syntax error because the date math does not return a NUMBER, but it returns an INTERVAL:

SQL> SELECT DUMP(SYSDATE - start_date) from test;

DUMP(SYSDATE-START_DATE)
-------------------------------------- 
Typ=14 Len=8: 188,10,0,0,223,65,1,0

You need to convert the number in your example into an INTERVAL first using the NUMTODSINTERVAL Function

For example:

SQL> SELECT (SYSDATE - start_date) DAY(5) TO SECOND from test;

(SYSDATE-START_DATE)DAY(5)TOSECOND
----------------------------------
+02748 22:50:04.000000

SQL> SELECT (SYSDATE - start_date) from test;

(SYSDATE-START_DATE)
--------------------
           2748.9515

SQL> select NUMTODSINTERVAL(2748.9515, 'day') from dual;

NUMTODSINTERVAL(2748.9515,'DAY')
--------------------------------
+000002748 22:50:09.600000000

SQL>

Based on the reverse cast with the NUMTODSINTERVAL() function, it appears some rounding is lost in translation.

I prefer to install the PowerShell Community Extensions and just use the Get-FileVersionInfo function that it provides.

Like so:

Get-FileVersionInfo MyAssembly.dll

with output like:

ProductVersion   FileVersion      FileName
--------------   -----------      --------
1.0.2907.18095   1.0.2907.18095   C:\Path\To\MyAssembly.dll

I've used it against an entire directory of assemblies with great success.

For OS X, I had v5.4.1 and needed the latest version 6 so I went to the Node.js homepage and clicked on one of the links below:

I then followed the installer and then I magically had the latest version of Node.js and npm.

Google used to recommend putting it just before the </body> tag, because the original method they provided for loading ga.js was blocking. The newer async syntax, though, can safely be put in the head with minimal blockage, so the current recommendation is just before the </head> tag.

<head> will add a little latency; in the footer will reduce the number of pageviews recorded at some small margin. It's a tradeoff. ga.js is heavily cached and present on a large percentage of sites across the web, so its often served from the cache, reducing latency to almost nil.

As a matter of personal preference, I like to include it in the <head>, but its really a matter of preference.

I know this is an old question, but I stumbled across it when I was having a similar issue, and just wanted to share how I ended achieving the results you requested so future people can pick what works best for their situation.

First, I utilize the onsubmit event in the form, and pass this to the function to make it easier to deal with this particular form.

<form action="/system/wpacert" onsubmit="return closeSelf(this);" method="post" enctype="multipart/form-data"  name="certform">
    <div>Certificate 1: <input type="file" name="cert1"/></div>
    <div>Certificate 2: <input type="file" name="cert2"/></div>
    <div>Certificate 3: <input type="file" name="cert3"/></div>

    <div><input type="submit" value="Upload"/></div>
</form>

In our function, we'll submit the form data, and then we'll close the window. This will allow it to submit the data, and once it's done, then it'll close the window and return you to your original window.

<script type="text/javascript">
  function closeSelf (f) {
     f.submit();
     window.close();
  }
</script>

Hope this helps someone out. Enjoy!

Option 2: This option will let you submit via AJAX, and if it's successful, it'll close the window. This prevents windows from closing prior to the data being submitted. Credits to http://jquery.malsup.com/form/ for their work on the jQuery Form Plugin

First, remove your onsubmit/onclick events from the form/submit button. Place an ID on the form so AJAX can find it.

<form action="/system/wpacert" method="post" enctype="multipart/form-data"  id="certform">
    <div>Certificate 1: <input type="file" name="cert1"/></div>
    <div>Certificate 2: <input type="file" name="cert2"/></div>
    <div>Certificate 3: <input type="file" name="cert3"/></div>

    <div><input type="submit" value="Upload"/></div>
</form>

Second, you'll want to throw this script at the bottom, don't forget to reference the plugin. If the form submission is successful, it'll close the window.

<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7/jquery.js"></script> 
<script src="http://malsup.github.com/jquery.form.js"></script> 

    <script>
       $(document).ready(function () {
          $('#certform').ajaxForm(function () {
          window.close();
          });
       });
    </script>

I would say the biggest difference between orElse and orElseGet comes when we want to evaluate something to get the new value in the else condition.

Consider this simple example -

// oldValue is String type field that can be NULL
String value;
if (oldValue != null) {
    value = oldValue;
} else {
    value = apicall().value;
}

Now let's transform the above example to using Optional along with orElse,

// oldValue is Optional type field
String value = oldValue.orElse(apicall().value);

Now let's transform the above example to using Optional along with orElseGet,

// oldValue is Optional type field
String value = oldValue.orElseGet(() -> apicall().value);

When orElse is invoked, the apicall().value is evaluated and passed to the method. Whereas, in the case of orElseGet the evaluation only happens if the oldValue is empty. orElseGet allows lazy evaluation.

Look up ?strftime:

%A Full weekday name in the current locale

df$day = strftime(df$date,'%A')

The accepted answer didn't work for me as my page jumped slightly on click, messing up my scroll animation.

I decided to update the entire URL using window.history.replaceState rather than using the window.location.hash method. Thus circumventing the hashChange event fired by the browser.

// Only fire when URL has anchor
$('a[href*="#"]:not([href="#"])').on('click', function(event) {

    // Prevent default anchor handling (which causes the page-jumping)
    event.preventDefault();

    if ( location.pathname.replace(/^\//,'') == this.pathname.replace(/^\//,'') && location.hostname == this.hostname ) {
        var target = $(this.hash);
        target = target.length ? target : $('[name=' + this.hash.slice(1) +']');

        if ( target.length ) {    
            // Smooth scrolling to anchor
            $('html, body').animate({
                scrollTop: target.offset().top
            }, 1000);

            // Update URL
            window.history.replaceState("", document.title, window.location.href.replace(location.hash, "") + this.hash);
        }
    }
});

Joking aside, if you're only expecting your input integer to be a zero or a one, you should really be checking that this is the case.

int yourInteger = whatever;
bool yourBool;
switch (yourInteger)
{
    case 0: yourBool = false; break;
    case 1: yourBool = true;  break;
    default:
        throw new InvalidOperationException("Integer value is not valid");
}

The out-of-the-box Convert won't check this; nor will yourInteger (==|!=) (0|1).

Here's a way to use the stock AWS CLI to generate a diff-able list of just object names:

aws s3api list-objects --bucket "$BUCKET" --query "Contents[].{Key: Key}" --output text

(based on https://stackoverflow.com/a/54378943/53529)

This gives you the full object name of every object in the bucket, separated by new lines. Useful if you want to diff between the contents of an S3 bucket and a GCS bucket, for example.

Similar situation. It was working. Then, I started to include pytables. At first view, no reason to errors. I decided to use another function, that has a domain constraint (elipse) and received the following error:

TypeError: 'numpy.float64' object cannot be interpreted as an integer

or

TypeError: 'numpy.float64' object is not iterable

The crazy thing: the previous function I was using, no code changed, started to return the same error. My intermediary function, already used was:

def MinMax(x, mini=0, maxi=1)
    return max(min(x,mini), maxi)

The solution was avoid numpy or math:

def MinMax(x, mini=0, maxi=1)
    x = [x_aux if x_aux > mini else mini for x_aux in x]
    x = [x_aux if x_aux < maxi else maxi for x_aux in x]
    return max(min(x,mini), maxi)

Then, everything calm again. It was like one library possessed max and min!

Support, unfortunately, is brutal at best. Here's a post on the topic:

https://www.campaignmonitor.com/blog/email-marketing/2013/02/embedded-images-in-html-email/

And the post content:

you can try this

public IEnumerable<string> Get()
 {
     return new string[] { "value1", "value2" };
 }

If you remove the coverage session, also the coverage coloring will disappear. For this, hit Remove Session or Remove All Sessions in the Coverage view's toolbar.

http://eclemma.org/faq.html

This works for me in Java 1.5 - I stripped out specific exceptions for readability.

import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import org.w3c.dom.Document;
import java.io.ByteArrayInputStream;

public Document loadXMLFromString(String xml) throws Exception
{
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();

    factory.setNamespaceAware(true);
    DocumentBuilder builder = factory.newDocumentBuilder();

    return builder.parse(new ByteArrayInputStream(xml.getBytes()));
}

The best way to take input of a character in Scanner class is:

Scanner sca=new Scanner(System.in);
System.out.println("enter a character");
char ch=sca.next().charAt(0);

emanuel.directive('hymn', function() {
   return {
       restrict: 'E',
       link: function(scope, element, attrs) {
           // some ode
       },
       templateUrl: function(elem,attrs) {
           return attrs.templateUrl || 'some/path/default.html'
       }
   }
});

So you can provide templateUrl via markup

<hymn template-url="contentUrl"><hymn>

Now you just take a care that property contentUrl populates with dynamically generated path.

Old code, but this is what I've been using:

    public static IEnumerable<List<T>> InSetsOf<T>(this IEnumerable<T> source, int max)
    {
        var toReturn = new List<T>(max);
        foreach (var item in source)
        {
            toReturn.Add(item);
            if (toReturn.Count == max)
            {
                yield return toReturn;
                toReturn = new List<T>(max);
            }
        }
        if (toReturn.Any())
        {
            yield return toReturn;
        }
    }

Solution

You can use the troubleshooting tips below.

Troubleshooting Tip #1

1. Exit Eclipse

2. Open a web browser and visit, http://localhost:8080

3. If you see a "Tomcat" web page then that means Tomcat is running as a Windows service. To stop Tomcat running as a Windows services, open your Windows Control Panel. Find the service "Apache Tomcat" and stop it.

4. If you don't see a "Tomcat" web page, then stop the appropriate process displayed.

-- Troubleshooting Tip #2 - GUI Option

Steps to free port which is already used to run Tomcat server in Eclipse

1. On MS Windows, select Start > All Programs > Accessories > System Tools >Resource Monitor

2. Expand the Network Tab

3. Move to the section for Listening Ports

4. Look in the Port column and scroll to find entry for port 8080

5. Select the given process and delete/kill the process

6. Return back to Eclipse and start the Tomcat Server, it should start up now.

Troubleshooting Tip #3 - Command-Line Option

Steps to free port which is already used to run Tomcat server in Eclipse

For example , suppose 8080 port is used , we need to make free 8080 to run tomcat

Step 1: (open the CMD command)

C:\Users\username>netstat -o -n -a | findstr 0.0:8080

TCP 0.0.0.0:3000 0.0.0.0:0 LISTENING 3116

Now , we can see that LISTENING port is 3116 for 8080 ,

We need to kill 3116 now

Step 2:

C:\Users\username>taskkill /F /PID 3116

Step 3: Return back to Eclipse and start the Tomcat Server, it should start up now.

====

Mac/Linux SOLUTION

Step 0: Exit Eclipse

Step 1: Open a terminal window

Step 2: Enter the following command to find the process id

lsof -i :8080 This will give output of the application that is running on port 8080

Step 3: Enter the following command to kill the process

kill $(lsof -t -i :8080)

Step 4: Return back to Eclipse and start the Tomcat Server, it should start up now.

It's not possible to embed videos directly, but you can put an image which links to a YouTube video:

[![IMAGE ALT TEXT HERE](https://img.youtube.com/vi/YOUTUBE_VIDEO_ID_HERE/0.jpg)](https://www.youtube.com/watch?v=YOUTUBE_VIDEO_ID_HERE)

• For more information about Markdown look at this Markdown cheatsheet on GitHub.
• For more information about Youtube image links look this question.

1. Please make sure that you have installed python 2.7.12 or below version otherwise you will get this error definitely.
2. Make sure Oracle client is 64 bit installed if OS is 64 Bit.
3. Make sure Microsoft Visual C++ Compiler for Python 2.7 is 64 for bit for 64 bit Os or 32 bit for 32 bit. Note:- IF ur OS is 64 bit install all package of 64 bit or if Os is 32 bit install 32 bit package.

First Talk About

Normal Class - that's mean any class define that's a normally in java it's means you create different type of method properties etc.
Bean - Bean is nothing it's only a object of that particular class using this bean you can access your java class same as object..

and after that talk about last one POJO

POJO - POJO is that class which have no any services it's have only a default constructor and private property and those property for setting a value corresponding setter and getter methods. It's short form of Plain Java Object.

I had this issue for a server instance on my local machine and found that it was because I was pointing to 127.0.0.1 with something other than "localhost" in my hosts file. There are two ways to fix this issue in my case:

1. Clear the offending entry pointing to 127.0.0.1 in the hosts file
2. use "localhost" instead of the other name that in the hosts file that points to 127.0.0.1

*This only worked for me when I was running the sql server instance on my local box and attempting to access it from the same machine.

curl -X GET -u username:password  {{ http://www.example.com/filename.txt }} -O

1. How can I do what I want to do (that is, initialize an array in a constructor (not assigning elements in the body)). Is it even possible?

Yes. It's using a struct that contains an array. You say you already know about that, but then I don't understand the question. That way, you do initialize an array in the constructor, without assignments in the body. This is what boost::array does.

Does the C++03 standard say anything special about initializing aggregates (including arrays) in ctor initializers? Or the invalidness of the above code is a corollary of some other rules?

A mem-initializer uses direct initialization. And the rules of clause 8 forbid this kind of thing. I'm not exactly sure about the following case, but some compilers do allow it.

struct A {
  char foo[6];
  A():foo("hello") { } /* valid? */
};

See this GCC PR for further details.

Do C++0x initializer lists solve the problem?

Yes, they do. However your syntax is invalid, I think. You have to use braces directly to fire off list initialization

struct A {
  int foo[3];
  A():foo{1, 2, 3} { }
  A():foo({1, 2, 3}) { } /* invalid */
};

The answer already posted will work. If you want to use the jQuery :not you can do this:

if ($(this).is(':not(:checked)'))

or

if ($(this).attr('checked') == false)

For opening a file, try this:

objexcel.Workbooks.Open(@"C:\YourPath\YourExcelFile.xls",
    missing, missing, missing, missing, missing, missing, missing,
    missing, missing, missing, missing, missing,missing, missing);

You must supply those stupid looking 'missing' arguments. If you were writing the same code in VB.Net you wouldn't have needed them, but you can't avoid them in C#.

Here is a complete version of code for doing this. I have tested it. The BufferedImage and Base64 class do the trick mainly. Also some parameter needs to be set correctly.

public class SimpleConvertImage {
    public static void main(String[] args) throws IOException{
        String dirName="C:\\";
        ByteArrayOutputStream baos=new ByteArrayOutputStream(1000);
        BufferedImage img=ImageIO.read(new File(dirName,"rose.jpg"));
        ImageIO.write(img, "jpg", baos);
        baos.flush();

        String base64String=Base64.encode(baos.toByteArray());
        baos.close();

        byte[] bytearray = Base64.decode(base64String);

        BufferedImage imag=ImageIO.read(new ByteArrayInputStream(bytearray));
        ImageIO.write(imag, "jpg", new File(dirName,"snap.jpg"));
    }
}

Reference link

To specifically answer a part of your question "Is there any situation in which it would be better to use one or the other?", consider a form with repeating sections. If the repeating section contains many select tags, then the options must be rendered for each select, for every row.

In such a case, I would consider using datalist with input, because the same datalist can be used for any number of inputs. This could potentially save a large amount of rendering time on the server, and would scale much better to any number of rows.

Another way is casting a string to a WMI object:

$size = ([wmi]"\\remotecomputer\root\cimv2:Win32_logicalDisk.DeviceID='c:'").Size
$free = ([wmi]"\\remotecomputer\root\cimv2:Win32_logicalDisk.DeviceID='c:'").FreeSpace

Also you can divide the results by 1GB or 1MB if you want different units:

$disk = ([wmi]"\\remotecomputer\root\cimv2:Win32_logicalDisk.DeviceID='c:'")
"Remotecomputer C: has {0:#.0} GB free of {1:#.0} GB Total" -f ($disk.FreeSpace/1GB),($disk.Size/1GB) | write-output

Output is: Remotecomputer C: has 252.7 GB free of 298.0 GB Total

If you are on windows and using mingw, gcc uses the win32 runtime, where printf needs %I64d for a 64 bit integer. (and %I64u for an unsinged 64 bit integer)

For most other platforms you'd use %lld for printing a long long. (and %llu if it's unsigned). This is standarized in C99.

gcc doesn't come with a full C runtime, it defers to the platform it's running on - so the general case is that you need to consult the documentation for your particular platform - independent of gcc.

Vanilla Javascript:

this.querySelector(':checked').getAttribute('data-id')

java -cp CLASSPATH is necesssary if you wish to specify all code in the classpath. This is useful for debugging code.

The jarred executable format: java -jar JarFile can be used if you wish to start the app with a single short command. You can specify additional dependent jar files in your MANIFEST using space separated jars in a Class-Path entry, e.g.:

Class-Path: mysql.jar infobus.jar acme/beans.jar

Both are comparable in terms of performance.

I'm not familiar with the async keyword (is this specific to Silverlight or a new feature in the beta version of Visual Studio?), but I think I can give you an idea of why you can't do this.

If I do:

var o = new MyObject();
MessageBox(o.SomeProperty.ToString());

o may not be done initializing before the next line of code runs. An instantiation of your object cannot be assigned until your constructor is completed, and making the constructor asynchronous wouldn't change that so what would be the point? However, you could call an asynchronous method from your constructor and then your constructor could complete and you would get your instantiation while the async method is still doing whatever it needs to do to setup your object.

Why so complicated? just put this :

data-html='true'

It's because you have turned on USB debugging in Developer Options. You can create a bug report by holding the power + both volume up and down.

Edit: This is what the forums say:

By pressing Volume up + Volume down + power button, you will feel a vibration after a second or so, that's when the bug reporting initiated.

To disable:

/system/bin/bugmailer.sh must be deleted/renamed.

There should be a folder on your SD card called "bug reports".

Have a look at this thread: http://forum.xda-developers.com/showthread.php?t=2252948

And this one: http://forum.xda-developers.com/showthread.php?t=1405639

first of all;

a Fragment must be inside a FragmentActivity, that's the first rule,

a FragmentActivity is quite similar to a standart Activity that you already know, besides having some Fragment oriented methods

second thing about Fragments, is that there is one important method you MUST call, wich is onCreateView, where you inflate your layout, think of it as the setContentLayout

here is an example:

    @Override public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {     mView       = inflater.inflate(R.layout.fragment_layout, container, false);       return mView; } 

and continu your work based on that mView, so to find a View by id, call mView.findViewById(..);

for the FragmentActivity part:

the xml part "must" have a FrameLayout in order to inflate a fragment in it

        <FrameLayout             android:id="@+id/content_frame"             android:layout_width="match_parent"             android:layout_height="match_parent"  >         </FrameLayout> 

as for the inflation part

getSupportFragmentManager().beginTransaction().replace(R.id.content_frame, new YOUR_FRAGMENT, "TAG").commit();

begin with these, as there is tons of other stuf you must know about fragments and fragment activities, start of by reading something about it (like life cycle) at the android developer site

If you have an SVG icon, you can use this script to generate your android icon set.

I know this basic method:

1)

<input type=”image” src=”submit.png”> (in any place)

2)

<form name=”print”>
<input type=”hidden” name=”a” value=”<?= $a ?>”>
<input type=”hidden” name=”b” value=”<?= $b ?>”>
<input type=”hidden” name=”c” value=”<?= $c ?>”>
</form>

3)

<script>
$(‘#submit’).click(function(){
    open(”,”results”);
    with(document.print)
    {
        method = “POST”;
        action = “results.php”;
        target = “results”;
        submit();
    }
});
</script>

Works!

I Could say I had similar issue. My case: I switched from new version to old version of the project in workspace, try to run single junit which require recompil, recompilation error was thrown with invalid target.

From Projects settings (F4) in IntelliJ everything was looking good and java was set to 1.7. But when I try recompile from IDE error was thrown because of wrong target level. After checking I found that in one of the iml file language was set to JDK_11. After manual change to JDK_1_7 everything back to normal.

Worth to also manual check lang level in *iml files created by IDE.

(Extension of @lepe's and @redsquare answer for ASP.NET MVC + jquery.validate.unobtrusive.js)

The jquery validation plugin (not the Microsoft unobtrusive one) allows you to put a .cancel class on your submit button to bypass validation completely (as shown in accepted answer).

 To skip validation while still using a submit-button, add a class="cancel" to that input.

  <input type="submit" name="submit" value="Submit"/>
  <input type="submit" class="cancel" name="cancel" value="Cancel"/>

(don't confuse this with type='reset' which is something completely different)

Unfortunately the jquery.validation.unobtrusive.js validation handling (ASP.NET MVC) code kinda screws up the jquery.validate plugin's default behavior.

This is what I came up with to allow you to put .cancel on the submit button as shown above. If Microsoft ever 'fixes' this then you can just remvoe this code.

    // restore behavior of .cancel from jquery validate to allow submit button 
    // to automatically bypass all jquery validation
    $(document).on('click', 'input[type=image].cancel,input[type=submit].cancel', function (evt)
    {
        // find parent form, cancel validation and submit it
        // cancelSubmit just prevents jQuery validation from kicking in
        $(this).closest('form').data("validator").cancelSubmit = true;
        $(this).closest('form').submit();
        return false;
    });

Note: If at first try it appears that this isn't working - make sure you're not roundtripping to the server and seeing a server generated page with errors. You'll need to bypass validation on the server side by some other means - this just allows the form to be submitted client side without errors (the alternative would be adding .ignore attributes to everything in your form).

(Note: you may need to add button to the selector if you're using buttons to submit)

Change:

using (RegistryKey key = Registry.LocalMachine.OpenSubKey("Software\\Wow6432Node\\MySQL AB\\MySQL Connector\\Net"))

To:

 using (RegistryKey key = Registry.LocalMachine.OpenSubKey("Software\Wow6432Node\MySQL AB\MySQL Connector\Net"))

You can update your python version to 3.8 in conda using the command

conda install -c anaconda python=3.8

as per https://anaconda.org/anaconda/python. Though not all packages support 3.8 yet, running

conda update --all

may resolve some dependency failures. You can also create a new environment called py38 using this command

conda create -n py38 python=3.8

Edit - note that the conda install option will potentially take a while to solve the environment, and if you try to abort this midway through you will lose your Python installation (usually this means it will resort to non-conda pre-installed system Python installation).

var data = [ 
 {"Id": 10004, "PageName": "club"}, 
 {"Id": 10040, "PageName": "qaz"}, 
 {"Id": 10059, "PageName": "jjjjjjj"}
];

$.each(data, function(i, item) {
   alert(data[i].PageName);
});?

$.each(data, function(i, item) {
  alert(item.PageName);
});?

Or else You can try this method

var data = jQuery.parseJSON(response);
$.each(data, function(key,value) {
   alert(value.Id);    //It will shows the Id values
}); 

you can use myfaces tomahawk component

http://myfaces.apache.org/tomahawk-project/tomahawk12/tagdoc/t_div.html

using padding pad

In order to move the colorbar relative to the subplot, one may use the pad argument to fig.colorbar.

import matplotlib.pyplot as plt
import numpy as np; np.random.seed(1)

fig, ax = plt.subplots(figsize=(4,4))
im = ax.imshow(np.random.rand(11,16))
ax.set_xlabel("x label")

fig.colorbar(im, orientation="horizontal", pad=0.2)
plt.show()

using an axes divider

One can use an instance of make_axes_locatable to divide the axes and create a new axes which is perfectly aligned to the image plot. Again, the pad argument would allow to set the space between the two axes.

import matplotlib.pyplot as plt
from mpl_toolkits.axes_grid1 import make_axes_locatable
import numpy as np; np.random.seed(1)

fig, ax = plt.subplots(figsize=(4,4))
im = ax.imshow(np.random.rand(11,16))
ax.set_xlabel("x label")

divider = make_axes_locatable(ax)
cax = divider.new_vertical(size="5%", pad=0.7, pack_start=True)
fig.add_axes(cax)
fig.colorbar(im, cax=cax, orientation="horizontal")

plt.show()

using subplots

One can directly create two rows of subplots, one for the image and one for the colorbar. Then, setting the height_ratios as gridspec_kw={"height_ratios":[1, 0.05]} in the figure creation, makes one of the subplots much smaller in height than the other and this small subplot can host the colorbar.

import matplotlib.pyplot as plt
import numpy as np; np.random.seed(1)

fig, (ax, cax) = plt.subplots(nrows=2,figsize=(4,4), 
                  gridspec_kw={"height_ratios":[1, 0.05]})
im = ax.imshow(np.random.rand(11,16))
ax.set_xlabel("x label")

fig.colorbar(im, cax=cax, orientation="horizontal")

plt.show()

localStorage is something that is kept on the client side. There is no data transmitted to the server side.

You can only get the data with JavaScript and you can send it to the server side with Ajax.

Here's a trick I recently worked out for executing raw sql with binds:

binds = SomeRecord.bind(a_string_field: value1, a_date_field: value2) +
        SomeOtherRecord.bind(a_numeric_field: value3)
SomeRecord.connection.exec_query <<~SQL, nil, binds
  SELECT *
  FROM some_records
  JOIN some_other_records ON some_other_records.record_id = some_records.id
  WHERE some_records.a_string_field = $1
    AND some_records.a_date_field < $2
    AND some_other_records.a_numeric_field > $3
SQL

where ApplicationRecord defines this:

# Convenient way of building custom sql binds
def self.bind(column_values)
  column_values.map do |column_name, value|
    [column_for_attribute(column_name), value]
  end
end

and that is similar to how AR binds its own queries.

You have to override your ; delimiter with something like $$ to avoid this kind of error.

After your function definition, you can set the delimiter back to ;.

This should work:

DELIMITER $$
CREATE FUNCTION F_Dist3D (x1 decimal, y1 decimal) 
RETURNS decimal
DETERMINISTIC
BEGIN 
  DECLARE dist decimal;
  SET dist = SQRT(x1 - y1);
  RETURN dist;
END$$
DELIMITER ;

Try using the \t character in your strings

If you are passing package name as parameter to any of your user defined function then use the below code :

    Intent intent=new Intent(Intent.ACTION_DELETE);
    intent.setData(Uri.parse("package:"+packageName));
    startActivity(intent);

cgi.escape should be good to escape HTML in the limited sense of escaping the HTML tags and character entities.

But you might have to also consider encoding issues: if the HTML you want to quote has non-ASCII characters in a particular encoding, then you would also have to take care that you represent those sensibly when quoting. Perhaps you could convert them to entities. Otherwise you should ensure that the correct encoding translations are done between the "source" HTML and the page it's embedded in, to avoid corrupting the non-ASCII characters.

I managed to do it with

var html_string= "content";
document.getElementById('output_iframe1').src = "data:text/html;charset=utf-8," + escape(html_string);

You can use getnameinfo for Windows and for Linux.

Assuming you have a good (i.e. it's members have appropriate values) sockaddr* called pSockaddr:

char clienthost[NI_MAXHOST];  //The clienthost will hold the IP address.
char clientservice[NI_MAXSERV];
int theErrorCode = getnameinfo(pSockaddr, sizeof(*pSockaddr), clienthost, sizeof(clienthost), clientservice, sizeof(clientservice), NI_NUMERICHOST|NI_NUMERICSERV);

if( theErrorCode != 0 )
{
    //There was an error.
    cout << gai_strerror(e1) << endl;
}else{
    //Print the info.
    cout << "The ip address is = " << clienthost << endl;
    cout << "The clientservice = " << clientservice << endl;
}

I just came across this question in a search about destructors and I thought there was an unanswered part of your question in your comments, so I thought I would address that.

thank you guys. But what would be a good convention if ECMAScript doesn't have destructors? Should I create a method called destructor and call it manually when I'm done with the object? Any other idea?

If you want to tell your object that you are now done with it and it should specifically release any event listeners it has, then you can just create an ordinary method for doing that. You can call the method something like release() or deregister() or unhook() or anything of that ilk. The idea is that you're telling the object to disconnect itself from anything else it is hooked up to (deregister event listeners, clear external object references, etc...). You will have to call it manually at the appropriate time.

If, at the same time you also make sure there are no other references to that object, then your object will become eligible for garbage collection at that point.

ES6 does have weakMap and weakSet which are ways of keeping track of a set of objects that are still alive without affecting when they can be garbage collected, but it does not provide any sort of notification when they are garbage collected. They just disappear from the weakMap or weakSet at some point (when they are GCed).

FYI, the issue with this type of destructor you ask for (and probably why there isn't much of a call for it) is that because of garbage collection, an item is not eligible for garbage collection when it has an open event handler against a live object so even if there was such a destructor, it would never get called in your circumstance until you actually removed the event listeners. And, once you've removed the event listeners, there's no need for the destructor for this purpose.

I suppose there's a possible weakListener() that would not prevent garbage collection, but such a thing does not exist either.

FYI, here's another relevant question Why is the object destructor paradigm in garbage collected languages pervasively absent?. This discussion covers finalizer, destructor and disposer design patterns. I found it useful to see the distinction between the three.

Edit in 2020 - proposal for object finalizer

There is a Stage 3 EMCAScript proposal to add a user-defined finalizer function after an object is garbage collected.

A canonical example of something that would benefit from a feature like this is an object that contains a handle to an open file. If the object is garbage collected (because no other code still has a reference to it), then this finalizer scheme allows one to at least put a message to the console that an external resource has just been leaked and code elsewhere should be fixed to prevent this leak.

If you read the proposal thoroughly, you will see that it's nothing like a full-blown destructor in a language like C++. This finalizer is called after the object has already been destroyed and you have to predetermine what part of the instance data needs to be passed to the finalizer for it to do its work. Further, this feature is not meant to be relied upon for normal operation, but rather as a debugging aid and as a backstop against certain types of bugs. You can read the full explanation for these limitations in the proposal.

Since image is deprecated, you should use varbinary.

per Microsoft (thanks for the link @Christopher)

ntext , text, and image data types will be removed in a future version of Microsoft SQL Server. Avoid using these data types in new development work, and plan to modify applications that currently use them. Use nvarchar(max), varchar(max), and varbinary(max) instead.

Fixed and variable-length data types for storing large non-Unicode and Unicode character and binary data. Unicode data uses the UNICODE UCS-2 character set.

The best way to implement it using matplotlib.pyplot.bar(range, height, tick_label) where the range provides scalar values for the positioning of the corresponding bar in the graph. tick_label does the same work as xticks(). One can replace it with an integer also and use multiple plt.bar(integer, height, tick_label). For detailed information please refer the documentation.

import matplotlib.pyplot as plt

data = {'apple': 67, 'mango': 60, 'lichi': 58}
names = list(data.keys())
values = list(data.values())

#tick_label does the some work as plt.xticks()
plt.bar(range(len(data)),values,tick_label=names)
plt.savefig('bar.png')
plt.show()

Additionally the same plot can be generated without using range(). But the problem encountered was that tick_label just worked for the last plt.bar() call. Hence xticks() was used for labelling:

data = {'apple': 67, 'mango': 60, 'lichi': 58}
names = list(data.keys())
values = list(data.values())
plt.bar(0,values[0],tick_label=names[0])
plt.bar(1,values[1],tick_label=names[1])
plt.bar(2,values[2],tick_label=names[2])
plt.xticks(range(0,3),names)
plt.savefig('fruit.png')
plt.show()

There are 2 possibilities. In either case PyGame has to be initialized by pygame.init.

import pygame
pygame.init()

Use either the pygame.font module and create a pygame.font.SysFont or pygame.font.Font object. render() a pygame.Surface with the text and blit the Surface to the screen:

my_font = pygame.font.SysFont(None, 50)
text_surface = myfont.render("Hello world!", True, (255, 0, 0))
screen.blit(text_surface, (10, 10))

Or use the pygame.freetype module. Create a pygame.freetype.SysFont() or pygame.freetype.Font object. render() a pygame.Surface with the text or directly render_to() the text to the screen:

my_ft_font = pygame.freetype.SysFont('Times New Roman', 50)
my_ft_font.render_to(screen, (10, 10), "Hello world!", (255, 0, 0))

See also Text and font

Minimal pygame.font example: repl.it/@Rabbid76/PyGame-Text

import pygame

pygame.init()
window = pygame.display.set_mode((500, 150))
clock = pygame.time.Clock()

font = pygame.font.SysFont(None, 100)
text = font.render('Hello World', True, (255, 0, 0))

background = pygame.Surface(window.get_size())
ts, w, h, c1, c2 = 50, *window.get_size(), (128, 128, 128), (64, 64, 64)
tiles = [((x*ts, y*ts, ts, ts), c1 if (x+y) % 2 == 0 else c2) for x in range((w+ts-1)//ts) for y in range((h+ts-1)//ts)]
for rect, color in tiles:
    pygame.draw.rect(background, color, rect)

run = True
while run:
    clock.tick(60)
    for event in pygame.event.get():
        if event.type == pygame.QUIT:
            run = False

    window.blit(background, (0, 0))
    window.blit(text, text.get_rect(center = window.get_rect().center))
    pygame.display.flip()

pygame.quit()
exit()

Minimal pygame.freetype example: repl.it/@Rabbid76/PyGame-FreeTypeText

import pygame
import pygame.freetype

pygame.init()
window = pygame.display.set_mode((500, 150))
clock = pygame.time.Clock()

ft_font = pygame.freetype.SysFont('Times New Roman', 80)

background = pygame.Surface(window.get_size())
ts, w, h, c1, c2 = 50, *window.get_size(), (128, 128, 128), (64, 64, 64)
tiles = [((x*ts, y*ts, ts, ts), c1 if (x+y) % 2 == 0 else c2) for x in range((w+ts-1)//ts) for y in range((h+ts-1)//ts)]
for rect, color in tiles:
    pygame.draw.rect(background, color, rect)

run = True
while run:
    clock.tick(60)
    for event in pygame.event.get():
        if event.type == pygame.QUIT:
            run = False

    window.blit(background, (0, 0))
    text_rect = ft_font.get_rect('Hello World')
    text_rect.center = window.get_rect().center
    ft_font.render_to(window, text_rect.topleft, 'Hello World', (255, 0, 0))
    pygame.display.flip()

pygame.quit()
exit()

Here is corrected code:

import pylab as plb
import matplotlib.pyplot as plt
from scipy.optimize import curve_fit
from scipy import asarray as ar,exp

x = ar(range(10))
y = ar([0,1,2,3,4,5,4,3,2,1])

n = len(x)                          #the number of data
mean = sum(x*y)/n                   #note this correction
sigma = sum(y*(x-mean)**2)/n        #note this correction

def gaus(x,a,x0,sigma):
    return a*exp(-(x-x0)**2/(2*sigma**2))

popt,pcov = curve_fit(gaus,x,y,p0=[1,mean,sigma])

plt.plot(x,y,'b+:',label='data')
plt.plot(x,gaus(x,*popt),'ro:',label='fit')
plt.legend()
plt.title('Fig. 3 - Fit for Time Constant')
plt.xlabel('Time (s)')
plt.ylabel('Voltage (V)')
plt.show()

result:

After some searches in the android references, the newcomer QuadFlask Color Picker seems to be a technically and aesthetically good choice. Also it has Transparency slider and supports HEX coded colors.

Take a look:
QuadFlask Color Picker

PHP also has money_format().

Here's an example:

echo money_format('$%i', 3.4); // echos '$3.40'

This function actually has tons of options, go to the documentation I linked to to see them.

Note: money_format is undefined in Windows.

UPDATE: Via the PHP manual: https://www.php.net/manual/en/function.money-format.php

WARNING: This function [money_format] has been DEPRECATED as of PHP 7.4.0. Relying on this function is highly discouraged.

Instead, look into NumberFormatter::formatCurrency.

    $number = "123.45";
    $formatter = new NumberFormatter('en_US', NumberFormatter::CURRENCY);
    return $formatter->formatCurrency($number, 'USD');

The simplest way would be to directly subtract the date objects from one another.

For example:

var hours = Math.abs(date1 - date2) / 36e5;

The subtraction returns the difference between the two dates in milliseconds. 36e5 is the scientific notation for 60*60*1000, dividing by which converts the milliseconds difference into hours.

Try this one for CLOB sizes bigger than VARCHAR2:

We have to split the CLOB in parts of "VARCHAR2 compatible" sizes, run lengthb through every part of the CLOB data, and summarize all results.

declare
   my_sum int;
begin
   for x in ( select COLUMN, ceil(DBMS_LOB.getlength(COLUMN) / 2000) steps from TABLE ) 
   loop
       my_sum := 0;
       for y in 1 .. x.steps
       loop
          my_sum := my_sum + lengthb(dbms_lob.substr( x.COLUMN, 2000, (y-1)*2000+1 ));
          -- some additional output
          dbms_output.put_line('step:' || y );
          dbms_output.put_line('char length:' || DBMS_LOB.getlength(dbms_lob.substr( x.COLUMN, 2000 , (y-1)*2000+1 )));
          dbms_output.put_line('byte length:' || lengthb(dbms_lob.substr( x.COLUMN, 2000, (y-1)*2000+1 )));
          continue;
        end loop;
        dbms_output.put_line('char summary:' || DBMS_LOB.getlength(x.COLUMN));
        dbms_output.put_line('byte summary:' || my_sum);
        continue;
    end loop;
end;
/

Here is another solution for adding class definitions to the widgets after declaring the fields in the class.

def __init__(self, *args, **kwargs):
    super(SampleClass, self).__init__(*args, **kwargs)
    self.fields['name'].widget.attrs['class'] = 'my_class'

This looks like valid Python code, so if the file is on your project's classpath (and not in some other directory or in arbitrary places) one way would be just to rename the file to "abc.py" and import it as a module, using import abc. You can even update the values using the reload function later. Then access the values as abc.path1 etc.

Of course, this can be dangerous in case the file contains other code that will be executed. I would not use it in any real, professional project, but for a small script or in interactive mode this seems to be the simplest solution.

Just put the abc.py into the same directory as your script, or the directory where you open the interactive shell, and do import abc or from abc import *.

The best way to find out why Docker isn't working will be to run the daemon manually.

$ sudo service docker stop
$ ps aux | grep docker  # do this until you don't see /usr/bin/docker -d
$ /usr/bin/docker -d

The Docker daemon logs to STDOUT, so it will start spitting out whatever it's doing.

Here was what my problem was:

[8bf47e42.initserver()] Creating pidfile
2015/01/11 15:20:33 pid file found, ensure docker is not running or delete /var/run/docker.pid

This was because the instance had been cloned from another virtual machine. I just had to remove the pidfile, and everything worked afterwards.

Of course, instead of blindly assuming this will work, I'd suggest running the daemon manually one more time and reviewing the log output for any other errors before starting the service back up.

To answer my own question, after posting on openssl mailing list got this:

Here is C code to convert from an OpenSSL public key to an OpenSSH public key. You can grab the code from this link and compile it yourself:

static unsigned char pSshHeader[11] = { 0x00, 0x00, 0x00, 0x07, 0x73, 0x73, 0x68, 0x2D, 0x72, 0x73, 0x61};

static int SshEncodeBuffer(unsigned char *pEncoding, int bufferLen, unsigned char* pBuffer)
{
   int adjustedLen = bufferLen, index;
   if (*pBuffer & 0x80)
   {
      adjustedLen++;
      pEncoding[4] = 0;
      index = 5;
   }
   else
   {
      index = 4;
   }
   pEncoding[0] = (unsigned char) (adjustedLen >> 24);
   pEncoding[1] = (unsigned char) (adjustedLen >> 16);
   pEncoding[2] = (unsigned char) (adjustedLen >>  8);
   pEncoding[3] = (unsigned char) (adjustedLen      );
   memcpy(&pEncoding[index], pBuffer, bufferLen);
   return index + bufferLen;
}

int main(int argc, char**  argv)
{
   int iRet = 0;
   int nLen = 0, eLen = 0;
   int encodingLength = 0;
   int index = 0;
   unsigned char *nBytes = NULL, *eBytes = NULL;
   unsigned char* pEncoding = NULL;
   FILE* pFile = NULL;
   EVP_PKEY *pPubKey = NULL;
   RSA* pRsa = NULL;
   BIO *bio, *b64;

   ERR_load_crypto_strings(); 
   OpenSSL_add_all_algorithms();

   if (argc != 3)
   {
      printf("usage: %s public_key_file_name ssh_key_description\n", argv[0]);
      iRet = 1;
      goto error;
   }

   pFile = fopen(argv[1], "rt");
   if (!pFile)
   {
      printf("Failed to open the given file\n");
      iRet = 2;
      goto error;
   }

   pPubKey = PEM_read_PUBKEY(pFile, NULL, NULL, NULL);
   if (!pPubKey)
   {
      printf("Unable to decode public key from the given file: %s\n", ERR_error_string(ERR_get_error(), NULL));
      iRet = 3;
      goto error;
   }

   if (EVP_PKEY_type(pPubKey->type) != EVP_PKEY_RSA)
   {
      printf("Only RSA public keys are currently supported\n");
      iRet = 4;
      goto error;
   }

   pRsa = EVP_PKEY_get1_RSA(pPubKey);
   if (!pRsa)
   {
      printf("Failed to get RSA public key : %s\n", ERR_error_string(ERR_get_error(), NULL));
      iRet = 5;
      goto error;
   }

   // reading the modulus
   nLen = BN_num_bytes(pRsa->n);
   nBytes = (unsigned char*) malloc(nLen);
   BN_bn2bin(pRsa->n, nBytes);

   // reading the public exponent
   eLen = BN_num_bytes(pRsa->e);
   eBytes = (unsigned char*) malloc(eLen);
   BN_bn2bin(pRsa->e, eBytes);

   encodingLength = 11 + 4 + eLen + 4 + nLen;
   // correct depending on the MSB of e and N
   if (eBytes[0] & 0x80)
      encodingLength++;
   if (nBytes[0] & 0x80)
      encodingLength++;

   pEncoding = (unsigned char*) malloc(encodingLength);
   memcpy(pEncoding, pSshHeader, 11);

   index = SshEncodeBuffer(&pEncoding[11], eLen, eBytes);
   index = SshEncodeBuffer(&pEncoding[11 + index], nLen, nBytes);

   b64 = BIO_new(BIO_f_base64());
   BIO_set_flags(b64, BIO_FLAGS_BASE64_NO_NL);
   bio = BIO_new_fp(stdout, BIO_NOCLOSE);
   BIO_printf(bio, "ssh-rsa ");
   bio = BIO_push(b64, bio);
   BIO_write(bio, pEncoding, encodingLength);
   BIO_flush(bio);
   bio = BIO_pop(b64);
   BIO_printf(bio, " %s\n", argv[2]);
   BIO_flush(bio);
   BIO_free_all(bio);
   BIO_free(b64);

error:
   if (pFile)
      fclose(pFile);
   if (pRsa)
      RSA_free(pRsa);
   if (pPubKey)
      EVP_PKEY_free(pPubKey);
   if (nBytes)
      free(nBytes);
   if (eBytes)
      free(eBytes);
   if (pEncoding)
      free(pEncoding);

   EVP_cleanup();
   ERR_free_strings();
   return iRet;
}

If you set a breakpoint, you can paste this into the debugger to print the view hierarchy:

po [[UIWindow keyWindow] recursiveDescription]

You should be able to find your view's parent somewhere in that mess :)

I had to make a small change to Jack's program to get it to run. After declaring the struct pointer pvar, point it to the address of var. I found this solution on page 242 of Stephen Kochan's Programming in C.

#include <stdio.h>

int main()
{
  struct foo
  {
    int x;
    float y;
  };

  struct foo var;
  struct foo* pvar;
  pvar = &var;

  var.x = 5;
  (&var)->y = 14.3;
  printf("%i - %.02f\n", var.x, (&var)->y);
  pvar->x = 6;
  pvar->y = 22.4;
  printf("%i - %.02f\n", pvar->x, pvar->y);
  return 0;
}

Run this in vim with the following command:

:!gcc -o var var.c && ./var

Will output:

5 - 14.30
6 - 22.40

There is a class, Class, that can do this:

Class c = Class.forName("MyClass"); // if you want to specify a class
Class c = this.getClass();          // if you want to use the current class

System.out.println("Package: "+c.getPackage()+"\nClass: "+c.getSimpleName()+"\nFull Identifier: "+c.getName());

If c represented the class MyClass in the package mypackage, the above code would print:

Package: mypackage
Class: MyClass
Full Identifier: mypackage.MyClass

You can take this information and modify it for whatever you need, or go check the API for more information.

You can simply use event.target.dataset object . This will give you the object with all data attributes.

Some posted solutions have stopped working due to changes in the format of /proc/self/cgroup. Here is a single GNU grep command that should be a bit more robust to format changes:

grep -o -P -m1 'docker.*\K[0-9a-f]{64,}' /proc/self/cgroup

For reference, here are snippits of /proc/self/cgroup from inside docker containers that have been tested with this command:

Linux 4.4:

11:pids:/system.slice/docker-cde7c2bab394630a42d73dc610b9c57415dced996106665d427f6d0566594411.scope
...
1:name=systemd:/system.slice/docker-cde7c2bab394630a42d73dc610b9c57415dced996106665d427f6d0566594411.scope

Linux 4.8 - 4.13:

11:hugetlb:/docker/afe96d48db6d2c19585572f986fc310c92421a3dac28310e847566fb82166013
...
1:name=systemd:/docker/afe96d48db6d2c19585572f986fc310c92421a3dac28310e847566fb82166013

The instanceof keyword, as described by the other answers, is usually what you would want. Keep in mind that instanceof will return true for superclasses as well.

If you want to see if an object is a direct instance of a class, you could compare the class. You can get the class object of an instance via getClass(). And you can statically access a specific class via ClassName.class.

So for example:

if (a.getClass() == X.class) {
  // do something
}

In the above example, the condition is true if a is an instance of X, but not if a is an instance of a subclass of X.

In comparison:

if (a instanceof X) {
    // do something
  }

In the instanceof example, the condition is true if a is an instance of X, or if a is an instance of a subclass of X.

Most of the time, instanceof is right.

New method in Django 3

you can use Field.choices Enumeration Types new update in django3 like this :

from django.db import models

class Status(models.TextChoices):
    UNPUBLISHED = 'UN', 'Unpublished'
    PUBLISHED = 'PB', 'Published'


class Book(models.Model):
    status = models.CharField(
        max_length=2,
        choices=Status.choices,
        default=Status.UNPUBLISHED,
    )

django docs

You can put set xact_abort on before your transaction to make sure sql rolls back automatically in case of error.

Is better to relay in requestAnimationFrame than in a setTimeout. this is my solution in es6 modules and using Promises.

es6, modules and promises:

// onElementReady.js
const onElementReady = $element => (
  new Promise((resolve) => {
    const waitForElement = () => {
      if ($element) {
        resolve($element);
      } else {
        window.requestAnimationFrame(waitForElement);
      }
    };
    waitForElement();
  })
);

export default onElementReady;

// in your app
import onElementReady from './onElementReady';

const $someElement = document.querySelector('.some-className');
onElementReady($someElement)
  .then(() => {
    // your element is ready
  }

plain js and promises:

var onElementReady = function($element) {
  return new Promise((resolve) => {
    var waitForElement = function() {
      if ($element) {
        resolve($element);
      } else {
        window.requestAnimationFrame(waitForElement);
      }
    };
    waitForElement();
  })
};

var $someElement = document.querySelector('.some-className');
onElementReady($someElement)
  .then(() => {
    // your element is ready
  });

This is a bit stupid maybe but the error message I got was Permission denied and it sent me spiralling down in a very wrong direction to attempt to solve it. (Here for example)

I haven't even added any bash script myself, I think one is added by nodejs image which I use.

FROM node:14.9.0

I was wrongly running to expose/connect the port on my local:

docker run -p 80:80 [name] . # this is wrong!

which gives

/usr/local/bin/docker-entrypoint.sh: 8: exec: .: Permission denied

But you shouldn't even have a dot in the end, it was added to documentation of another projects docker image by misstake. You should simply run:

docker run -p 80:80 [name]

I like Docker a lot but it's sad it has so many gotchas like this and not always very clear error messages...

In a simple way the permission can be granted using manifest.xml file, but it was ok till the api level 23 sdk version 6, after from here, if we want to get the permission we have to ask for the use to allow the permission which are needed.

Just add this code in the mainActivity.java

Override
            public void onClick(View view) {
                // Request the permission
                ActivityCompat.requestPermissions(MainActivity.this,
                        new String[]{Manifest.permission.CAMERA},
                        PERMISSION_REQUEST_CAMERA);

Replace CAMERA or add with WRITE_EXTERNAL_STORAGE if you want, and with the unique code.

                            new String[]{Manifest.permission.CAMERA,
Manifest.permission.WRITE_EXTERNAL_STORAGE},
                    101);

This is the simple code to get permission.

tangible T4 Editor plus modeling tools for VS2010 adds IntelliSense and Syntax Coloring to T4 Text Templates (Free)

You can use something of the form

s.decode('utf-8')

which will convert a UTF-8 encoded bytestring into a Python Unicode string. But the exact procedure to use depends on exactly how you load and parse the XML file, e.g. if you don't ever access the XML string directly, you might have to use a decoder object from the codecs module.

I personally prefer the "boolean1 ^ boolean2" expression due to its succinctness.

If I was in your situation (working in a team), I would strike a compromise by encapsulating the "boolean1 ^ boolean2" logic in a function with a descriptive name such as "isDifferent(boolean1, boolean2)".

For example, instead of using "boolean1 ^ boolean2", you would call "isDifferent(boolean1, boolean2)" like so:

if (isDifferent(boolean1, boolean2))
{
  //do it
}

Your "isDifferent(boolean1, boolean2)" function would look like:

private boolean isDifferent(boolean1, boolean2)
{
    return boolean1 ^ boolean2;
}

Of course, this solution entails the use of an ostensibly extraneous function call, which in itself is subject to Best Practices scrutiny, but it avoids the verbose (and ugly) expression "(boolean1 && !boolean2) || (boolean2 && !boolean1)"!

Sometimes this exception is caused by a bug in the support library implementation. Recently I had to downgrade from 26.1.0 to 25.4.0 to get rid of it.

You can try this too, If you don't want to do this by your method.

    Arrays.sort(arr);
    System.out.println("Min value "+arr[0]);
    System.out.println("Max value "+arr[arr.length-1]);

try this method

$("your id or class name").css({ 'margin-top': '18px' });  

If you are using md-select and ng-repeat ing md-option from angular material then you can add ng-model-options="{trackBy: '$value.id'}" to the md-select tag ash shown in this pen

Code:

<md-select ng-model="user" style="min-width: 200px;" ng-model-options="{trackBy: '$value.id'}">_x000D_
  <md-select-label>{{ user ? user.name : 'Assign to user' }}</md-select-label>_x000D_
  <md-option ng-value="user" ng-repeat="user in users">{{user.name}}</md-option>_x000D_
</md-select>

The key is to use the reset_index() method.

Use:

import pandas

df1 = pandas.DataFrame( { 
    "Name" : ["Alice", "Bob", "Mallory", "Mallory", "Bob" , "Mallory"] , 
    "City" : ["Seattle", "Seattle", "Portland", "Seattle", "Seattle", "Portland"] } )

g1 = df1.groupby( [ "Name", "City"] ).count().reset_index()

Now you have your new dataframe in g1:

nota bene.

This answer has 20 upvotes now, but it is not intended as an endorsement of std::valarray.

In my experience, time is better spent installing and learning to use a full-fledged math library such as Eigen. Valarray has fewer features than the competition, but it isn't more efficient or particularly easier to use.

If you only need a little bit of linear algebra, and you are dead-set against adding anything to your toolchain, then maybe valarray would fit. But, being stuck unable to express the mathematically correct solution to your problem is a very bad position to be in. Math is relentless and unforgiving. Use the right tool for the job.

The standard library provides std::valarray<double>. std::vector<>, suggested by a few others here, is intended as a general-purpose container for objects. valarray, lesser known because it is more specialized (not using "specialized" as the C++ term), has several advantages:

• It does not allocate extra space. A vector rounds up to the nearest power of two when allocating, so you can resize it without reallocating every time. (You can still resize a valarray; it's just still as expensive as realloc().)
• You may slice it to access rows and columns easily.
• Arithmetic operators work as you would expect.

Of course, the advantage over using C is that you don't need to manage memory. The dimensions can reside on the stack, or in a slice object.

std::valarray<double> matrix( row * col ); // no more, no less, than a matrix
matrix[ std::slice( 2, col, row ) ] = pi; // set third column to pi
matrix[ std::slice( 3*row, row, 1 ) ] = e; // set fourth row to e

Because the Method2 is static, all you have to do is call like this:

public class AllMethods
{
    public static void Method2()
    {
        // code here
    }
}

class Caller
{
    public static void Main(string[] args)
    {
        AllMethods.Method2();
    }
}

If they are in different namespaces you will also need to add the namespace of AllMethods to caller.cs in a using statement.

If you wanted to call an instance method (non-static), you'd need an instance of the class to call the method on. For example:

public class MyClass
{
    public void InstanceMethod() 
    { 
        // ...
    }
}

public static void Main(string[] args)
{
    var instance = new MyClass();
    instance.InstanceMethod();
}

Update

As of C# 6, you can now also achieve this with using static directive to call static methods somewhat more gracefully, for example:

// AllMethods.cs
namespace Some.Namespace
{
    public class AllMethods
    {
        public static void Method2()
        {
            // code here
        }
    }
}

// Caller.cs
using static Some.Namespace.AllMethods;

namespace Other.Namespace
{
    class Caller
    {
        public static void Main(string[] args)
        {
            Method2(); // No need to mention AllMethods here
        }
    }
}

Further Reading

• Static Classes and Static Class Members (C# Programming Guide)
• Methods (C# Programming Guide)
• using static directive (C# Reference)

I would suggest going the lxml route and using xpath.

from lxml import etree
# data is the variable containing the html
data = etree.HTML(data)
anchor = data.xpath('//a[@class="title"]/text()')

Amending the most recent commit message

git commit --amend

will open your editor, allowing you to change the commit message of the most recent commit. Additionally, you can set the commit message directly in the command line with:

git commit --amend -m "New commit message"

…however, this can make multi-line commit messages or small corrections more cumbersome to enter.

Make sure you don't have any working copy changes staged before doing this or they will get committed too. (Unstaged changes will not get committed.)

Changing the message of a commit that you've already pushed to your remote branch

If you've already pushed your commit up to your remote branch, then - after amending your commit locally (as described above) - you'll also need to force push the commit with:

git push <remote> <branch> --force
# Or
git push <remote> <branch> -f

Warning: force-pushing will overwrite the remote branch with the state of your local one. If there are commits on the remote branch that you don't have in your local branch, you will lose those commits.

Warning: be cautious about amending commits that you have already shared with other people. Amending commits essentially rewrites them to have different SHA IDs, which poses a problem if other people have copies of the old commit that you've rewritten. Anyone who has a copy of the old commit will need to synchronize their work with your newly re-written commit, which can sometimes be difficult, so make sure you coordinate with others when attempting to rewrite shared commit history, or just avoid rewriting shared commits altogether.

Perform an interactive rebase

Another option is to use interactive rebase. This allows you to edit any message you want to update even if it's not the latest message.

In order to do a Git squash, follow these steps:

// n is the number of commits up to the last commit you want to be able to edit
git rebase -i HEAD~n

Once you squash your commits - choose the e/r for editing the message:

Important note about interactive rebase

When you use git rebase -i HEAD~n there can be more than n commits. Git will "collect" all the commits in the last n commits, and if there was a merge somewhere in between that range you will see all the commits as well, so the outcome will be n + .

Good tip:

If you have to do it for more than a single branch and you might face conflicts when amending the content, set up git rerere and let Git resolve those conflicts automatically for you.

Documentation

• git-commit(1) Manual Page

• git-rebase(1) Manual Page

• git-push(1) Manual Page

Do the Quick fix in the Markers tab.

Reference: https://metamug.com/blog/eclipse-gson-class-not-found

Yes: You can use Inner Join to join on multiple columns.

SELECT E.CaseNum, E.FileNum, E.ActivityNum, E.Grade, V.Score from Evaluation E
INNER JOIN Value V
ON E.CaseNum = V.CaseNum AND
    E.FileNum = V.FileNum AND 
    E.ActivityNum = V.ActivityNum

Create table

CREATE TABLE MyNewTab(CaseNum int, FileNum int,
    ActivityNum int, Grade int, Score varchar(100))

Insert values

INSERT INTO MyNewTab Values(CaseNum, FileNum, ActivityNum, Grade, Score)
SELECT E.CaseNum, E.FileNum, E.ActivityNum, E.Grade, V.Score from Evaluation E
INNER JOIN Value V
ON E.CaseNum = V.CaseNum AND
    E.FileNum = V.FileNum AND 
    E.ActivityNum = V.ActivityNum

Not sure how efficient this is, but I wrote this function that returns the point size that will fit a string to a given width:

func fontSizeThatFits(targetWidth: CGFloat, maxFontSize: CGFloat, font: UIFont) -> CGFloat {
    var variableFont = font.withSize(maxFontSize)
    var currentWidth = self.size(withAttributes: [NSAttributedString.Key.font:variableFont]).width

    while currentWidth > targetWidth {
        variableFont = variableFont.withSize(variableFont.pointSize - 1)
        currentWidth = self.size(withAttributes: [NSAttributedString.Key.font:variableFont]).width
    }

    return variableFont.pointSize
}

And it would be used like this:

textView.font = textView.font!.withSize(textView.text!.fontSizeThatFits(targetWidth: view.frame.width, maxFontSize: 50, font: textView.font!))

I would also recommend the Tao Framework. But one additional note:

Take a look at these tutorials: http://www.taumuon.co.uk/jabuka/

The error comes when you try to call sum(x) and x is a factor.

What that means is that one of your columns, though they look like numbers are actually factors (what you are seeing is the text representation)

simple fix, convert to numeric. However, it needs an intermeidate step of converting to character first. Use the following:

family[, 1] <- as.numeric(as.character( family[, 1] ))
family[, 3] <- as.numeric(as.character( family[, 3] ))

For a detailed explanation of why the intermediate as.character step is needed, take a look at this question: How to convert a factor to integer\numeric without loss of information?

The above answers work fine too, but I've found you can usually just use message.author.send("blah blah") instead of message.author.sendMessage("blah blah").

-EDIT- : This is because the sendMessage command is outdated as of v12 in Discord Js

.send tends to work better for me in general than .sendMessage, which sometimes runs into problems. Hope that helps a teeny bit!

Such unexpected problems can appear when you copy the code from a web page or email and the text contains unprintable characters like individual CR or LF and non-breaking spaces.

You can get top and left without traversing DOM like this:

function getCoords(elem) { // crossbrowser version
    var box = elem.getBoundingClientRect();

    var body = document.body;
    var docEl = document.documentElement;

    var scrollTop = window.pageYOffset || docEl.scrollTop || body.scrollTop;
    var scrollLeft = window.pageXOffset || docEl.scrollLeft || body.scrollLeft;

    var clientTop = docEl.clientTop || body.clientTop || 0;
    var clientLeft = docEl.clientLeft || body.clientLeft || 0;

    var top  = box.top +  scrollTop - clientTop;
    var left = box.left + scrollLeft - clientLeft;

    return { top: Math.round(top), left: Math.round(left) };
}

java.sql.Timestamp is a subclass of java.util.Date. So, just upcast it.

Date dtStart = resultSet.getTimestamp("dtStart");
Date dtEnd = resultSet.getTimestamp("dtEnd");

Using SimpleDateFormat and creating Joda DateTime should be straightforward from this point on.

try this

 <body>
   <div class="linkCollection">
             <a tabindex=1 href="www.demo1.com">link</a>    
             <a tabindex=2 href="www.demo2.com">link</a>    
             <a tabindex=3 href="www.demo3.com">link</a>    
             <a tabindex=4 href="www.demo4.com">link</a>    
             <a tabindex=5 href="www.demo5.com">link</a>    
             <a tabindex=6 href="www.demo6.com">link</a>    
             <a tabindex=7 href="www.demo7.com">link</a>    
             <a tabindex=8 href="www.demo8.com">link</a>    
             <a tabindex=9 href="www.demo9.com">link</a>    
             <a tabindex=10 href="www.demo10.com">link</a>   
        </div>

</body>

<script>
$(document).ready(function(){
  $(".linkCollection a").focus(function(){
    var href=$(this).attr('href');
    console.log(href);
    // href variable holds the active selected link.
  });
});
</script>

don't forgot to add jQuery library

<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.4.0/jquery.min.js"></script>

Here is another way to format the query:

return $repository->createQueryBuilder('u')
            ->select('count(u.id)')
            ->getQuery()
            ->getSingleScalarResult();

Somebody posted quite a few form fields to your page. The new default max introduced by the recent security update is 1000.

Try adding the following setting in your web.config's <appsettings> block. in this block you are maximizing the MaxHttpCollection values this will override the defaults set by .net Framework. you can change the value accordingly as per your form needs

<appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="2001" />
 </appSettings>

For more information please read this post. For more insight into the security patch by microsoft you can read this Knowledge base article

I loaded an array of waist sizes (already created in my array.xml) into my preferences.xml file with the code below. @array/pant_inch_size is the id of the entire array.

 <ListPreference 
 android:title="choosepantsize"
 android:summary="Choose Pant Size"
 android:key="pantSizePref" 
 android:defaultValue="34" 
 android:entries="@array/pant_inch_size"
 android:entryValues="@array/pant_inch_size" /> 

This populated the menu with choices from the array. I set the default size as 34, so when the menu pops up, they see size 34 is pre-selected.

ORA-01031: insufficient privileges Solution: Go to Your System User. then Write This Code:

SQL> grant dba to UserName; //Put This username which user show this error message.

Grant succeeded.

This blog post describes two methods of centering a div both horizontally and vertically. One uses only CSS and will work with divs that have a fixed size; the other uses jQuery and will work divs for which you do not know the size in advance.

I've duplicated the CSS and jQuery examples from the blog post's demo here:

CSS

Assuming you have a div with a class of .classname, the css below should work.

The left:50%; top:50%; sets the top left corner of the div to the center of the screen; the margin:-75px 0 0 -135px; moves it to the left and up by half of the width and height of the fixed-size div respectively.

.className{
    width:270px;
    height:150px;
    position:absolute;
    left:50%;
    top:50%;
    margin:-75px 0 0 -135px;
}

jQuery

$(document).ready(function(){
    $(window).resize(function(){
        $('.className').css({
            position:'absolute',
            left: ($(window).width() - $('.className').outerWidth())/2,
            top: ($(window).height() - $('.className').outerHeight())/2
        });
    });
    // To initially run the function:
    $(window).resize();
});

Here's a demo of the techniques in practice.

Sometimes Window ? Show View does not show the Tasks. Just go to Window ? Show View -> Others and type Tasks in the dialog box.

When you install jenkins on your local machine, the default username is admin and password it gets automatically filled.

This is what resolved the problem for me:

In your HTML tr tag, add this:

style="border-collapse: collapse; border: none;"

That removed all the borders that were showing on the table row.

You can also create a borderless window, and make the borders and title bar yourself

As commented by David Thomas, descendants of those child elements will (likely) inherit most of the styles assigned to those child elements.

You need to wrap your .myTestClass inside an element and apply the styles to descendants by adding .wrapper * descendant selector. Then, add .myTestClass > * child selector to apply the style to the elements children, not its grand children. For example like this:

JSFiddle - DEMO

.wrapper * {_x000D_
    color: blue;_x000D_
    margin: 0 100px; /* Only for demo */_x000D_
}_x000D_
.myTestClass > * {_x000D_
    color:red;_x000D_
    margin: 0 20px;_x000D_
}

<div class="wrapper">_x000D_
    <div class="myTestClass">Text 0_x000D_
        <div>Text 1</div>_x000D_
        <span>Text 1</span>_x000D_
        <div>Text 1_x000D_
            <p>Text 2</p>_x000D_
            <div>Text 2</div>_x000D_
        </div>_x000D_
        <p>Text 1</p>_x000D_
    </div>_x000D_
    <div>Text 0</div>_x000D_
</div>

Here is my global module I use -

var Cookie = {   

   Create: function (name, value, days) {

       var expires = "";

        if (days) {
           var date = new Date();
           date.setTime(date.getTime() + (days * 24 * 60 * 60 * 1000));
           expires = "; expires=" + date.toGMTString();
       }

       document.cookie = name + "=" + value + expires + "; path=/";
   },

   Read: function (name) {

        var nameEQ = name + "=";
        var ca = document.cookie.split(";");

        for (var i = 0; i < ca.length; i++) {
            var c = ca[i];
            while (c.charAt(0) == " ") c = c.substring(1, c.length);
            if (c.indexOf(nameEQ) == 0) return c.substring(nameEQ.length, c.length);
        }

        return null;
    },

    Erase: function (name) {

        Cookie.create(name, "", -1);
    }

};

@everestial007 's solution worked for me. This is how I improved it for my use case, which is to have the columns of each different df with a different suffix so I can more easily differentiate between the dfs in the final merged dataframe.

from functools import reduce
import pandas as pd
dfs = [df1, df2, df3, df4]
suffixes = [f"_{i}" for i in range(len(dfs))]
# add suffixes to each df
dfs = [dfs[i].add_suffix(suffixes[i]) for i in range(len(dfs))]
# remove suffix from the merging column
dfs = [dfs[i].rename(columns={f"date{suffixes[i]}":"date"}) for i in range(len(dfs))]
# merge
dfs = reduce(lambda left,right: pd.merge(left,right,how='outer', on='date'), dfs)

If you are working with Android's MediaStore database, here is how to store an image and then display it after it is saved.

on button click write this

 Intent in = new Intent(Intent.ACTION_PICK,
                    android.provider.MediaStore.Images.Media.EXTERNAL_CONTENT_URI);
            in.putExtra("crop", "true");
            in.putExtra("outputX", 100);
            in.putExtra("outputY", 100);
            in.putExtra("scale", true);
            in.putExtra("return-data", true);

            startActivityForResult(in, 1);

then do this in your activity

@Override
    protected void onActivityResult(int requestCode, int resultCode, Intent data) {
        // TODO Auto-generated method stub
        super.onActivityResult(requestCode, resultCode, data);

        if (requestCode == 1 && resultCode == RESULT_OK && data != null) {

            Bitmap bmp = (Bitmap) data.getExtras().get("data");

            img.setImageBitmap(bmp);
            btnadd.requestFocus();

            ByteArrayOutputStream baos = new ByteArrayOutputStream();
            bmp.compress(Bitmap.CompressFormat.JPEG, 100, baos);
            byte[] b = baos.toByteArray();
            String encodedImageString = Base64.encodeToString(b, Base64.DEFAULT);

            byte[] bytarray = Base64.decode(encodedImageString, Base64.DEFAULT);
            Bitmap bmimage = BitmapFactory.decodeByteArray(bytarray, 0,
                    bytarray.length);

        }

    }

Have a look at Runtime.exec() Javadoc

Process p = Runtime.getRuntime().exec("ssh myhost");
PrintStream out = new PrintStream(p.getOutputStream());
BufferedReader in = new BufferedReader(new InputStreamReader(p.getInputStream()));

out.println("ls -l /home/me");
while (in.ready()) {
  String s = in.readLine();
  System.out.println(s);
}
out.println("exit");

p.waitFor();

To do this, you can set a callback function for the animate command which will execute after the scroll animation has finished.

For example:

var body = $("html, body");
body.stop().animate({scrollTop:0}, 500, 'swing', function() { 
   alert("Finished animating");
});

Where that alert code is, you can execute more javascript to add in further animation.

Also, the 'swing' is there to set the easing. Check out http://api.jquery.com/animate/ for more info.

If you're using OpenResty then it provides for in-built millisecond time accuracy through the use of its ngx.now() function. Although if you want fine grained millisecond accuracy then you may need to call ngx.update_time() first. Or if you want to go one step further...

If you are using luajit enabled environment, such as OpenResty, then you can also use ffi to access C based time functions such as gettimeofday() e.g: (Note: The pcall check for the existence of struct timeval is only necessary if you're running it repeatedly e.g. via content_by_lua_file in OpenResty - without it you run into errors such as attempt to redefine 'timeval')

if pcall(ffi.typeof, "struct timeval") then
        -- check if already defined.
else
        -- undefined! let's define it!
        ffi.cdef[[
           typedef struct timeval {
                long tv_sec;
                long tv_usec;
           } timeval;

        int gettimeofday(struct timeval* t, void* tzp);
]]
end
local gettimeofday_struct = ffi.new("struct timeval")
local function gettimeofday()
        ffi.C.gettimeofday(gettimeofday_struct, nil)
        return tonumber(gettimeofday_struct.tv_sec) * 1000000 + tonumber(gettimeofday_struct.tv_usec)
end

Then the new lua gettimeofday() function can be called from lua to provide the clock time to microsecond level accuracy.

Indeed, one could take a similar approaching using clock_gettime() to obtain nanosecond accuracy.

You can use date filter to convert in date and display in specific format.

In .ts file (typescript):

let dateString = '1968-11-16T00:00:00' 
let newDate = new Date(dateString);

In HTML:

{{dateString |  date:'MM/dd/yyyy'}}

Below are some formats which you can implement :

Backend:

public todayDate = new Date();

HTML :

<select>
<option value=""></option>
<option value="MM/dd/yyyy">[{{todayDate | date:'MM/dd/yyyy'}}]</option>
<option value="EEEE, MMMM d, yyyy">[{{todayDate | date:'EEEE, MMMM d, yyyy'}}]</option>
<option value="EEEE, MMMM d, yyyy h:mm a">[{{todayDate | date:'EEEE, MMMM d, yyyy h:mm a'}}]</option>
<option value="EEEE, MMMM d, yyyy h:mm:ss a">[{{todayDate | date:'EEEE, MMMM d, yyyy h:mm:ss a'}}]</option>
<option value="MM/dd/yyyy h:mm a">[{{todayDate | date:'MM/dd/yyyy h:mm a'}}]</option>
<option value="MM/dd/yyyy h:mm:ss a">[{{todayDate | date:'MM/dd/yyyy h:mm:ss a'}}]</option>
<option value="MMMM d">[{{todayDate | date:'MMMM d'}}]</option>   
<option value="yyyy-MM-ddTHH:mm:ss">[{{todayDate | date:'yyyy-MM-ddTHH:mm:ss'}}]</option>
<option value="h:mm a">[{{todayDate | date:'h:mm a'}}]</option>
<option value="h:mm:ss a">[{{todayDate | date:'h:mm:ss a'}}]</option>      
<option value="EEEE, MMMM d, yyyy hh:mm:ss a">[{{todayDate | date:'EEEE, MMMM d, yyyy hh:mm:ss a'}}]</option>
<option value="MMMM yyyy">[{{todayDate | date:'MMMM yyyy'}}]</option> 
</select>

NOTE: Not 100% Cross Browser

Check browser compatibility @ http://caniuse.com/#search=FileReader

as you will see people have had issues with the not so common browsers, But this could come down to the version of the browser.. I always recommend using something like caniuse to see what generation of browser is supported... This is only a working answer for the user, not a final copy and paste code for people to just use..

The Fiddle: http://jsfiddle.net/d2atnbrt/3/

THE HTML CODE:

<input type="file" id="my_file_input" />
<div id='my_file_output'></div>

THE JS CODE:

var oFileIn;

$(function() {
    oFileIn = document.getElementById('my_file_input');
    if(oFileIn.addEventListener) {
        oFileIn.addEventListener('change', filePicked, false);
    }
});


function filePicked(oEvent) {
    // Get The File From The Input
    var oFile = oEvent.target.files[0];
    var sFilename = oFile.name;
    // Create A File Reader HTML5
    var reader = new FileReader();

    // Ready The Event For When A File Gets Selected
    reader.onload = function(e) {
        var data = e.target.result;
        var cfb = XLS.CFB.read(data, {type: 'binary'});
        var wb = XLS.parse_xlscfb(cfb);
        // Loop Over Each Sheet
        wb.SheetNames.forEach(function(sheetName) {
            // Obtain The Current Row As CSV
            var sCSV = XLS.utils.make_csv(wb.Sheets[sheetName]);   
            var oJS = XLS.utils.sheet_to_row_object_array(wb.Sheets[sheetName]);   

            $("#my_file_output").html(sCSV);
            console.log(oJS)
        });
    };

    // Tell JS To Start Reading The File.. You could delay this if desired
    reader.readAsBinaryString(oFile);
}

This also requires https://cdnjs.cloudflare.com/ajax/libs/xls/0.7.4-a/xls.js to convert to a readable format, i've also used jquery only for changing the div contents and for the dom ready event.. so jquery is not needed

This is as basic as i could get it,

EDIT - Generating A Table

The Fiddle: http://jsfiddle.net/d2atnbrt/5/

This second fiddle shows an example of generating your own table, the key here is using sheet_to_json to get the data in the correct format for JS use..

One or two comments in the second fiddle might be incorrect as modified version of the first fiddle.. the CSV comment is at least

Test XLS File: http://www.whitehouse.gov/sites/default/files/omb/budget/fy2014/assets/receipts.xls

This does not cover XLSX files thought, it should be fairly easy to adjust for them using their examples.

On Ubuntu, after installing ZSH, and prevously on the bash terminal installed Node or other packages,

First open:

nano .zshrc

And uncomment the second line:

export PATH=$HOME/bin:/usr/local/bin:$PATH

This works for me, and without writting any line, and I think this option is available on Mac too.

A bit late to the party, but I've made my own little function that does NOT wrap around the ends or pads with zeroes that are then used to find the average as well. As a further treat is, that it also re-samples the signal at linearly spaced points. Customize the code at will to get other features.

The method is a simple matrix multiplication with a normalized Gaussian kernel.

def running_mean(y_in, x_in, N_out=101, sigma=1):
    '''
    Returns running mean as a Bell-curve weighted average at evenly spaced
    points. Does NOT wrap signal around, or pad with zeros.

    Arguments:
    y_in -- y values, the values to be smoothed and re-sampled
    x_in -- x values for array

    Keyword arguments:
    N_out -- NoOf elements in resampled array.
    sigma -- 'Width' of Bell-curve in units of param x .
    '''
    N_in = size(y_in)

    # Gaussian kernel
    x_out = np.linspace(np.min(x_in), np.max(x_in), N_out)
    x_in_mesh, x_out_mesh = np.meshgrid(x_in, x_out)
    gauss_kernel = np.exp(-np.square(x_in_mesh - x_out_mesh) / (2 * sigma**2))
    # Normalize kernel, such that the sum is one along axis 1
    normalization = np.tile(np.reshape(sum(gauss_kernel, axis=1), (N_out, 1)), (1, N_in))
    gauss_kernel_normalized = gauss_kernel / normalization
    # Perform running average as a linear operation
    y_out = gauss_kernel_normalized @ y_in

    return y_out, x_out

A simple usage on a sinusoidal signal with added normal distributed noise:

PHP only interprets escaped characters (with the exception of the escaped backslash \\ and the escaped single quote \') when in double quotes (")

This works (results in a newline):

"\n"

This does not result in a newline:

'\n'

I had this issue recently and I resolved it by simply rolling IE8 back to IE7.

My guess is that IE7 had these files as a wrapper for working on Windows XP, but IE8 was likely made to work with Vista/7 so it removed the files because the later editions just don't use the shim.

How about just mapping ....

Array(n).map((value, index) ....) is 80% of the way there. But for some odd reason it does not work. But there is a workaround.

Array(n).map((v,i) => i) // does not work
Array(n).fill().map((v,i) => i) // does dork

For a range

Array(end-start+1).fill().map((v,i) => i + start) // gives you a range

Odd, these two iterators return the same result: Array(end-start+1).entries() and Array(end-start+1).fill().entries()

groups

or

groups user

I've written this, but have to check the existing methods mentioned to see if they are better.

module PrettyDate
  def to_pretty
    a = (Time.now-self).to_i

    case a
      when 0 then 'just now'
      when 1 then 'a second ago'
      when 2..59 then a.to_s+' seconds ago' 
      when 60..119 then 'a minute ago' #120 = 2 minutes
      when 120..3540 then (a/60).to_i.to_s+' minutes ago'
      when 3541..7100 then 'an hour ago' # 3600 = 1 hour
      when 7101..82800 then ((a+99)/3600).to_i.to_s+' hours ago' 
      when 82801..172000 then 'a day ago' # 86400 = 1 day
      when 172001..518400 then ((a+800)/(60*60*24)).to_i.to_s+' days ago'
      when 518400..1036800 then 'a week ago'
      else ((a+180000)/(60*60*24*7)).to_i.to_s+' weeks ago'
    end
  end
end

Time.send :include, PrettyDate

I think this is what you were looking for:

grep -E "string1|string2" filename

I think that answers like this:

grep 'string1.*string2\|string2.*string1' filename

only match the case where both are present, not one or the other or both.

SQL> create table a(id number);

Table created.

SQL> alter table a rename column id to new_id;

Table altered.

SQL> desc a
 Name                                      Null?    Type
 ----------------------------------------- -------- -----------
 NEW_ID                                             NUMBER

You can give permission to folder and all its contents using option -R i.e Recursive permissions.

But I would suggest not to give 777 permission to all folder and it's all contents. You should give specific permission to each sub-folder in www directory folders.

Ideally, give 755 permission for security reasons to the web folder.

sudo chmod -R 755 /www/store

Each number has meaning in permission. Do not give full permission.

N   Description                      ls   binary    
0   No permissions at all            ---  000
1   Only execute                     --x  001
2   Only write                       -w-  010
3   Write and execute                -wx  011
4   Only read                        r--  100
5   Read and execute                 r-x  101
6   Read and write                   rw-  110
7   Read, write, and execute         rwx  111

• First Number 7 - Read, write, and execute for the user.
• Second Number 5 - Read and execute for the group.
• Third Number 5 - Read and execute for others.

If your production web folder has multiple users, then you can set permissions and user groups accordingly.

More info :

1. Understanding File Permissions: What Does “Chmod 777" Mean?
2. What file permissions should I set on web root?
3. Why shouldn't /var/www have chmod 777

I normally set paths in

~/.bashrc

However for Java, I followed instructions at https://askubuntu.com/questions/55848/how-do-i-install-oracle-java-jdk-7

and it was sufficient for me.

you can also define multiple java_home's and have only one of them active (rest commented).

suppose in your bashrc file, you have

export JAVA_HOME=......jdk1.7

#export JAVA_HOME=......jdk1.8

notice 1.8 is commented. Once you do

source ~/.bashrc

jdk1.7 will be in path.

you can switch them fairly easily this way. There are other more permanent solutions too. The link I posted has that info.

Example using std::string find method:

#include <iostream>
#include <string>

int main (){
    std::string str ("There are two needles in this haystack with needles.");
    std::string str2 ("needle");

    size_t found = str.find(str2);
    if(found!=std::string::npos){ 
        std::cout << "first 'needle' found at: " << found << '\n';
    }

    return 0;
}

Result:

first 'needle' found at: 14.

If you're using Python 3, raw_input has changed to input

Python 3 example:

line = input('Enter a sentence:')

If you're using MySQL, try this:

ALTER TABLE tablename AUTO_INCREMENT = 1

For me this works well with IE10, Chrome, Firefox and Safari:

   #MyDiv>*
   {
        zoom: 50%;
        -moz-transform: scale(0.5);
        -webkit-transform: scale(1.0);
   }

This zooms all content in to 50%.

Building off the lazygit answer, the following solution adds a user check to verify the changes before pushing. It will revert the commands if cancelled. And all that will happen if and only if there are changes in the local repo.

### SAFER LAZY GIT
function lazygit() {
  git add .
  if git commit -a -m "$1"; then
    read -r -p "Are you sure you want to push these changes? [y/N]} " response
    case "$response" in
      [yY][eE][sS]|[yY])
        git push
        ;;
      *)
        git reset HEAD~1 --soft
        echo "Reverted changes."
        ;;
    esac
  fi
}

In percentage :

$('.your-class').click(function (e){
    var $this = $(this); // or use $(e.target) in some cases;
    var offset = $this.offset();
    var width = $this.width();
    var height = $this.height();
    var posX = offset.left;
    var posY = offset.top;
    var x = e.pageX-posX;
        x = parseInt(x/width*100,10);
        x = x<0?0:x;
        x = x>100?100:x;
    var y = e.pageY-posY;
        y = parseInt(y/height*100,10);
        y = y<0?0:y;
        y = y>100?100:y;
    console.log(x+'% '+y+'%');
});