Right Click the form you want to hide them on, choose Controls -> Properties.

In Properties, set

• Control Box -> False
• Minimize Box -> False
• Maximize Box -> False

You'll do this in the designer.

You must need to specify columns name which you want to insert if there is an Identity column. So the command will be like this below:

SET IDENTITY_INSERT DuplicateTable ON

INSERT Into DuplicateTable ([IdentityColumn], [Column2], [Column3], [Column4] ) 
SELECT [IdentityColumn], [Column2], [Column3], [Column4] FROM MainTable

SET IDENTITY_INSERT DuplicateTable OFF

If your table has many columns then get those columns name by using this command.

SELECT column_name + ','
FROM   information_schema.columns 
WHERE  table_name = 'TableName'
for xml path('')

(after removing the last comma(',')) Just copy past columns name.

Or, if you don't need else clause:

[ "$x" == "valid" ] && echo "x has the value 'valid'"

Edit the build path in this order, this worked for me.

Make sure the /gen is before /src

Answering in generalities:

1. Yes, usually.
2. See More Info Here
3. Yes, because each has a different JS processing engine, however, in running a test on the site below, the switch always out performed the if, elseif on a large number of iterations.

Test site

You'd need to make the enum expose value somehow, e.g.

public enum Tax {
    NONE(0), SALES(10), IMPORT(5);

    private final int value;
    private Tax(int value) {
        this.value = value;
    }

    public int getValue() {
        return value;
    }
}

...

public int getTaxValue() {
    Tax tax = Tax.NONE; // Or whatever
    return tax.getValue();
}

(I've changed the names to be a bit more conventional and readable, btw.)

This is assuming you want the value assigned in the constructor. If that's not what you want, you'll need to give us more information.

try this

   function getmoviename(id)
   {    
     var p_url= yoururl from where you get movie name,
     jQuery.ajax({
     type: "GET",             
     url: p_url,
     data: "id=" + id,
      success: function(data) {
       $('#summary').html(data);

    }
 });    
 }

and you html part is

  <a href="javascript:void(0);" class="movie" onclick="getmoviename(youridvariable)">
  Name of movie</a>

  <div id="summary">Here is summary of movie</div>

Many of the answers here are wrong. It seems people figure out what was causing status==0 in their particular case and then generalize that as the answer.

Practically speaking, status==0 for a failed XmlHttpRequest should be considered an undefined error.

The actual W3C spec defines the conditions for which zero is returned here: https://fetch.spec.whatwg.org/#concept-network-error

As you can see from the spec (fetch or XmlHttpRequest) this code could be the result of an error that happened even before the server is contacted.

Some of the common situations that produce this status code are reflected in the other answers but it could be any or none of these problems:

1. Illegal cross origin request (see CORS)
2. Firewall block or filtering
3. The request itself was cancelled in code
4. An installed browser extension is mucking things up

What would be helpful would be for browsers to provide detailed error reporting for more of these status==0 scenarios. Indeed, sometimes status==0 will accompany a helpful console message, but in others there is no other information.

As of Django 1.5, there is an update_fields property on model save. eg:

obj.save(update_fields=['field1', 'field2', ...])

https://docs.djangoproject.com/en/dev/ref/models/instances/

I prefer this approach because it doesn't create an atomicity problem if you have multiple web app instances changing different parts of a model instance.

The eval() function evaluates an expression, but "5+5" is a string, not an expression. Use parse() with text=<string> to change the string into an expression:

> eval(parse(text="5+5"))
[1] 10
> class("5+5")
[1] "character"
> class(parse(text="5+5"))
[1] "expression"

Calling eval() invokes many behaviours, some are not immediately obvious:

> class(eval(parse(text="5+5")))
[1] "numeric"
> class(eval(parse(text="gray")))
[1] "function"
> class(eval(parse(text="blue")))
Error in eval(expr, envir, enclos) : object 'blue' not found

See also tryCatch.

Enter the image and give height:100%;width:auto then just change the height of navbar itself to resize image. There is a really good example in codepen. https://codepen.io/bootstrapped/pen/KwYGwq

Just type .htaccess. as filename. Notice the dot at the end of htaccess. This will change in Windows to .htaccess without a dot at the end.

Try Window > Open Perspective > Java Browsing or some other Java perspectives

In one line:

String niceFormattedJson = JsonWriter.formatJson(jsonString)

The json-io libray (https://github.com/jdereg/json-io) is a small (75K) library with no other dependencies than the JDK.

In addition to pretty-printing JSON, you can serialize Java objects (entire Java object graphs with cycles) to JSON, as well as read them in.

String[] array = new String[items2.size()];
items2.toArray(array);

To add a Visual Studio GUI reference, you can find the DropDownStyle options under the Properties of the selected ComboBox:

Which will automatically add the line mentioned in the first answer to the Form.Designer.cs InitializeComponent(), like so:

this.comboBoxBatch.DropDownStyle = System.Windows.Forms.ComboBoxStyle.DropDownList;

This workaround is simpler and more elegant than explode:

$my_date = str_replace("/", ".", $my_date);
$my_date = strtotime($my_date);
$my_date = date("Y-m-d", $my_date);

You don't have to know what format you're getting the date in, but if it comes with slashes they are replaced with full stops and it is treated as European by strtotime.

Use:

SELECT *
  FROM YOUR_TABLE
 WHERE creation_date <= TRUNC(SYSDATE) - 30

SYSDATE returns the date & time; TRUNC resets the date to being as of midnight so you can omit it if you want the creation_date that is 30 days previous including the current time.

Depending on your needs, you could also look at using ADD_MONTHS:

SELECT *
  FROM YOUR_TABLE
 WHERE creation_date <= ADD_MONTHS(TRUNC(SYSDATE), -1)

Perhaps with the canvas tag (though it's not portable). There's a blog about how to rotate an image with canvas here, I suppose if you can rotate it, you can resize it. Maybe it can be a starting point.

See this library also.

Use saveas:

h=figure;
plot(x,y,'-bs','Linewidth',1.4,'Markersize',10);
% ...
saveas(h,name,'fig')
saveas(h,name,'jpg')

This way, the figure is plotted, and automatically saved to '.jpg' and '.fig'. You don't need to wait for the plot to appear and click 'save as' in the menu. Way to go if you need to plot/save a lot of figures.

If you really do not want to let the plot appear (it has to be loaded anyway, can't avoid that, else there is also nothing to save), you can hide it:

h=figure('visible','off')

To see a list of which commits are on one branch but not another, use git log:

git log --no-merges oldbranch ^newbranch

...that is, show commit logs for all commits on oldbranch that are not on newbranch. You can list multiple branches to include and exclude, e.g.

git log  --no-merges oldbranch1 oldbranch2 ^newbranch1 ^newbranch2

Note: on Windows ^ is an escape key, so it needs to be escaped with another ^:

git log --no-merges oldbranch ^^newbranch

For Ubuntu 18.04 or PHP 7.2 users you can do:

apt-get install php7.2-curl

You can check your PHP version by running php -v to verify your PHP version and get the right curl version.

Here is a ready to run source code for random number generator using c taken from this site: http://www.random-number.com/random-number-c/ . The implementation here is more general (a function that gets 3 parameters: min,max and number of random numbers to generate)

#include <time.h>
#include <stdlib.h>
#include <stdio.h>

// the random function
void RandomNumberGenerator(const int nMin, const int nMax, const int  nNumOfNumsToGenerate)
{
  int nRandonNumber = 0;
  for (int i = 0; i < nNumOfNumsToGenerate; i++)
  {
    nRandonNumber = rand()%(nMax-nMin) + nMin;
    printf("%d ", nRandonNumber);
  }
  printf("\n");
}

void main()
{
  srand(time(NULL));
  RandomNumberGenerator(1,70,5);
}

According to my humble opinion and my work experience with git, staging area is not the same as index. I may be wrong of course, but as I said, my experience in using git and my logic tell me, that index is a structure that follows your changes to your working area(local repository) that are not excluded by ignoring settings and staging area is to keep files that are already confirmed to be committed, aka files in index on which add command was run on. You don't notice and realize that "slight" difference, because you use git commit -a -m "comment" adding indexed and cached files to stage area and committing in one command or using IDEs like IDEA for that too often. And cache is that what keeps changes in indexed files. If you want to remove file from index that has not been added to staging area before, options proposed before match for you, but... If you have done that already, you will need to use

Git restore --staged <file>

And, please, don't ask me where I was 10 years ago... I missed you, this answer is for further generations)

There's a relatively new service called HockeyApp, which seems to rival TestFlight, however they claim to give you access to unlimited users, but it does cost some $$ unlike TestFlight which has now been integrated directly into iTunes Connect.

Hi Guys you cant convert directly string to bigdecimal

you need to first convert it into long after that u will convert big decimal

String currency = "135.69"; 
Long rate1=Long.valueOf((currency ));            
System.out.println(BigDecimal.valueOf(rate1));

There is Safety Net Attestation API of Google play services by which we can assess the device and determine if it is rooted/tampered.

Please go through my answer to deal with rooted devices:
https://stackoverflow.com/a/58304556/3908895

A basic definition about virtual is it determines if a member function of a class can be over-ridden in its derived classes.

A class's D-tor is called basically at the end of the scope, but there is a problem, for example when we define an instance on the Heap (dynamic allocation), we should delete it manually.

As soon as the instruction get executed, the base class destructor get called, but not for the derived one.

A Pratical example is when, in control field, you have to manipulate effectors, actuators.

At the end of the scope, if the destructor of one of the power elements (Actuator), isn't called, there will be fatal consequences.

#include <iostream>

class Mother{

public:

    Mother(){

          std::cout<<"Mother Ctor"<<std::endl;
    }

    virtual~Mother(){

        std::cout<<"Mother D-tor"<<std::endl;
    }


};

class Child: public Mother{

    public:

    Child(){

        std::cout<<"Child C-tor"<<std::endl;
    }

    ~Child(){

         std::cout<<"Child D-tor"<<std::endl;
    }
};

int main()
{

    Mother *c = new Child();
    delete c;

    return 0;
}

v$resource_limit view is so interesting for me in order to glance oracle sessions,processes..:

https://bbdd-error.blogspot.com.es/2017/09/check-sessions-and-processes-limit-in.html

With Postgres 9.3+, just use the -> operator. For example,

SELECT data->'images'->'thumbnail'->'url' AS thumb FROM instagram;

see http://clarkdave.net/2013/06/what-can-you-do-with-postgresql-and-json/ for some nice examples and a tutorial.

I have faced the same issue related to Strings equality check, One of the comparing string has ASCII character code 128-255.

i.e., Non-breaking space - [Hex - A0] Space [Hex - 20]. To show Non-breaking space over HTML. I have used the following spacing entities. Their character and its bytes are like &emsp is very wide space[ ]{-30, -128, -125}, &ensp is somewhat wide space[ ]{-30, -128, -126}, &thinsp is narrow space[ ]{32} , Non HTML Space {}

String s1 = "My Sample Space Data", s2 = "My Sample Space Data";
System.out.format("S1: %s\n", java.util.Arrays.toString(s1.getBytes()));
System.out.format("S2: %s\n", java.util.Arrays.toString(s2.getBytes()));

Output in Bytes:

S1: [77, 121, 32, 83, 97, 109, 112, 108, 101, 32, 83, 112, 97, 99, 101, 32, 68, 97, 116, 97] S2: [77, 121, -30, -128, -125, 83, 97, 109, 112, 108, 101, -30, -128, -125, 83, 112, 97, 99, 101, -30, -128, -125, 68, 97, 116, 97]

Use below code for Different Spaces and their Byte-Codes: wiki for List_of_Unicode_characters

String spacing_entities = "very wide space,narrow space,regular space,invisible separator";
System.out.println("Space String :"+ spacing_entities);
byte[] byteArray = 
    // spacing_entities.getBytes( Charset.forName("UTF-8") );
    // Charset.forName("UTF-8").encode( s2 ).array();
    {-30, -128, -125, 44, -30, -128, -126, 44, 32, 44, -62, -96};
System.out.println("Bytes:"+ Arrays.toString( byteArray ) );
try {
    System.out.format("Bytes to String[%S] \n ", new String(byteArray, "UTF-8"));
} catch (UnsupportedEncodingException e) {
    e.printStackTrace();
}

• ? ASCII transliterations of Unicode string for Java. unidecode

  String initials = Unidecode.decode( s2 );
  

• ? using Guava: Google Core Libraries for Java.

  String replaceFrom = CharMatcher.WHITESPACE.replaceFrom( s2, " " );
  

  For URL encode for the space use Guava laibrary.

  String encodedString = UrlEscapers.urlFragmentEscaper().escape(inputString);
  

• ? To overcome this problem used String.replaceAll() with some RegularExpression.

  // \p{Z} or \p{Separator}: any kind of whitespace or invisible separator.
  s2 = s2.replaceAll("\\p{Zs}", " ");
  
  
  s2 = s2.replaceAll("[^\\p{ASCII}]", " ");
  s2 = s2.replaceAll(" ", " ");
  

• ? Using java.text.Normalizer.Form. This enum provides constants of the four Unicode normalization forms that are described in Unicode Standard Annex #15 — Unicode Normalization Forms and two methods to access them.

  

  s2 = Normalizer.normalize(s2, Normalizer.Form.NFKC);
  

Testing String and outputs on different approaches like ? Unidecode, Normalizer, StringUtils.

String strUni = "Thïs iš â funky Štring Æ,Ø,Ð,ß";

// This is a funky String AE,O,D,ss
String initials = Unidecode.decode( strUni );

// Following Produce this o/p: Th^i¨s^ i~s? a^ fu°n?k¸y^ S?t?r´i?n´g? Æ,Ø,Ð,ß
String temp = Normalizer.normalize(strUni, Normalizer.Form.NFD);
Pattern pattern = Pattern.compile("\\p{InCombiningDiacriticalMarks}+");
temp = pattern.matcher(temp).replaceAll("");

String input = org.apache.commons.lang3.StringUtils.stripAccents( strUni );

Using Unidecode is the best choice, My final Code shown below.

public static void main(String[] args) {
    String s1 = "My Sample Space Data", s2 = "My Sample Space Data";
    String initials = Unidecode.decode( s2 );
    if( s1.equals(s2)) { //[ , ] %A0 - %2C - %20 « http://www.ascii-code.com/
        System.out.println("Equal Unicode Strings");
    } else if( s1.equals( initials ) ) {
        System.out.println("Equal Non Unicode Strings");
    } else {
        System.out.println("Not Equal");
    }

}

There is not a pure scanf replacement in standard Java, but you could use a java.util.Scanner for the same problems you would use scanf to solve.

What the PHP Notice means and how to reproduce it:

If you send a PHP array into a function that expects a string like: echo or print, then the PHP interpreter will convert your array to the literal string Array, throw this Notice and keep going. For example:

php> print(array(1,2,3))

PHP Notice:  Array to string conversion in 
/usr/local/lib/python2.7/dist-packages/phpsh/phpsh.php(591) :
eval()'d code on line 1
Array

In this case, the function print dumps the literal string: Array to stdout and then logs the Notice to stderr and keeps going.

Another example in a PHP script:

<?php
    $stuff = array(1,2,3);
    print $stuff;  //PHP Notice:  Array to string conversion in yourfile on line 3
?>

Correction 1: use foreach loop to access array elements

http://php.net/foreach

$stuff = array(1,2,3);
foreach ($stuff as $value) {
    echo $value, "\n";
}

Prints:

1
2
3

Or along with array keys

$stuff = array('name' => 'Joe', 'email' => '[email protected]');
foreach ($stuff as $key => $value) {
    echo "$key: $value\n";
}

Prints:

name: Joe
email: [email protected]

Note that array elements could be arrays as well. In this case either use foreach again or access this inner array elements using array syntax, e.g. $row['name']

Correction 2: Joining all the cells in the array together:

In case it's just a plain 1-demensional array, you can simply join all the cells into a string using a delimiter:

<?php
    $stuff = array(1,2,3);
    print implode(", ", $stuff);    //prints 1, 2, 3
    print join(',', $stuff);        //prints 1,2,3

Correction 3: Stringify an array with complex structure:

In case your array has a complex structure but you need to convert it to a string anyway, then use http://php.net/json_encode

$stuff = array('name' => 'Joe', 'email' => '[email protected]');
print json_encode($stuff);

Prints

{"name":"Joe","email":"[email protected]"}

A quick peek into array structure: use the builtin php functions

If you want just to inspect the array contents for the debugging purpose, use one of the following functions. Keep in mind that var_dump is most informative of them and thus usually being preferred for the purpose

• http://php.net/print_r
• http://php.net/var_dump
• http://php.net/var_export

examples

$stuff = array(1,2,3);
print_r($stuff);
$stuff = array(3,4,5);
var_dump($stuff);

Prints:

Array
(
    [0] => 1
    [1] => 2
    [2] => 3
)
array(3) {
  [0]=>
  int(3)
  [1]=>
  int(4)
  [2]=>
  int(5)
}

Like that:

$ command >>output 2>>error

To successfully track click events and on what graph element the user clicked, I did the following in my .js file I set up the following variables:

vm.chartOptions = {
    onClick: function(event, array) {
        let element = this.getElementAtEvent(event);
        if (element.length > 0) {
            var series= element[0]._model.datasetLabel;
            var label = element[0]._model.label;
            var value = this.data.datasets[element[0]._datasetIndex].data[element[0]._index];
        }
    }
};
vm.graphSeries = ["Series 1", "Serries 2"];
vm.chartLabels = ["07:00", "08:00", "09:00", "10:00"];
vm.chartData = [ [ 20, 30, 25, 15 ], [ 5, 10, 100, 20 ] ];

Then in my .html file I setup the graph as follows:

<canvas id="releaseByHourBar" 
    class="chart chart-bar"
    chart-data="vm.graphData"
    chart-labels="vm.graphLabels" 
    chart-series="vm.graphSeries"
    chart-options="vm.chartOptions">
</canvas>

You need to use the -p flag to send a password. And it's tricky because you must have no space between -p and the password.

$ mysql -h "server-name" -u "root" "-pXXXXXXXX" "database-name" < "filename.sql"

If you use a space after -p it makes the mysql client prompt you interactively for the password, and then it interprets the next command argument as a database-name:

$ mysql -h "server-name" -u "root" -p "XXXXXXXX" "database-name" < "filename.sql"
Enter password: <you type it in here>
ERROR 1049 (42000): Unknown database 'XXXXXXXX'

Actually, I prefer to store the user and password in ~/.my.cnf so I don't have to put it on the command-line at all:

[client]
user = root
password = XXXXXXXX

Then:

$ mysql -h "server-name" "database-name" < "filename.sql"

Re your comment:

I run batch-mode mysql commands like the above on the command line and in shell scripts all the time. It's hard to diagnose what's wrong with your shell script, because you haven't shared the exact script or any error output. I suggest you edit your original question above and provide examples of what goes wrong.

Also when I'm troubleshooting a shell script I use the -x flag so I can see how it's executing each command:

$ bash -x myscript.sh

fmod is the standard C function for handling floating-point modulus; I imagine your source was saying that Java handles floating-point modulus the same as C's fmod function. In Java you can use the % operator on doubles the same as on integers:

int x = 5 % 3; // x = 2
double y = .5 % .3; // y = .2

As stated by Maxim Dounin in the comments above:

When nginx returns 400 (Bad Request) it will log the reason into error log, at "info" level. Hence an obvious way to find out what's going on is to configure error_log to log messages at "info" level and take a look into error log when testing.

By just entering swift command in the terminal, it will show the version, while logging to Swift console.(something like below)

System-IOSs-MacBook-Air:~ system$ swift
Welcome to Apple Swift version 5.1 (swiftlang-1100.0.270.13 clang-1100.0.33.7).
Type :help for assistance.

You can't, and you shouldn't.

Every other approach / alternative will only cause really bad user engagement.

That's my opinion.

The necessary method is Mockito#verify:

public static <T> T verify(T mock,
                           VerificationMode mode)

mock is your mocked object and mode is the VerificationMode that describes how the mock should be verified. Possible modes are:

verify(mock, times(5)).someMethod("was called five times");
verify(mock, never()).someMethod("was never called");
verify(mock, atLeastOnce()).someMethod("was called at least once");
verify(mock, atLeast(2)).someMethod("was called at least twice");
verify(mock, atMost(3)).someMethod("was called at most 3 times");
verify(mock, atLeast(0)).someMethod("was called any number of times"); // useful with captors
verify(mock, only()).someMethod("no other method has been called on the mock");

You'll need these static imports from the Mockito class in order to use the verify method and these verification modes:

import static org.mockito.Mockito.atLeast;
import static org.mockito.Mockito.atLeastOnce;
import static org.mockito.Mockito.atMost;
import static org.mockito.Mockito.never;
import static org.mockito.Mockito.only;
import static org.mockito.Mockito.times;
import static org.mockito.Mockito.verify;

So in your case the correct syntax will be:

Mockito.verify(mock, times(4)).send()

This verifies that the method send was called 4 times on the mocked object. It will fail if it was called less or more than 4 times.

If you just want to check, if the method has been called once, then you don't need to pass a VerificationMode. A simple

verify(mock).someMethod("was called once");

would be enough. It internally uses verify(mock, times(1)).someMethod("was called once");.

It is possible to have multiple verification calls on the same mock to achieve a "between" verification. Mockito doesn't support something like this verify(mock, between(4,6)).someMethod("was called between 4 and 6 times");, but we can write

verify(mock, atLeast(4)).someMethod("was called at least four times ...");
verify(mock, atMost(6)).someMethod("... and not more than six times");

instead, to get the same behaviour. The bounds are included, so the test case is green when the method was called 4, 5 or 6 times.

On the back of James Lee Baker's reply, I prefer this solution as it removes the reliance on browser support for :first :selected ...

$('#target').children().prop('selected', false);
$($('#target').children()[0]).prop('selected', 'selected');

The best solution, to me anyway, is buried in the comments of @ephemient's answer. I am just pulling it up here so that it doesn't go unnoticed. The credit for this should go to @FRoZeN (and @ephemient).

git diff --shortstat `git hash-object -t tree /dev/null`

returns the total of files and lines in the working directory of a repo, without any additional noise. As a bonus, only the source code is counted - binary files are excluded from the tally.

The command above works on Linux and OS X. The cross-platform version of it is

git diff --shortstat 4b825dc642cb6eb9a060e54bf8d69288fbee4904

That works on Windows, too.

For the record, the options for excluding blank lines,

• -w/--ignore-all-space,
• -b/--ignore-space-change,
• --ignore-blank-lines,
• --ignore-space-at-eol

don't have any effect when used with --shortstat. Blank lines are counted.

For Mac OS:

#ifdef __APPLE__

For MingW on Windows:

#ifdef __MINGW32__

For Linux:

#ifdef __linux__

For other Windows compilers, check this thread and this for several other compilers and architectures.

Edit: This is a more complete version that shows more differences between [ (aka test) and [[.

The following table shows that whether a variable is quoted or not, whether you use single or double brackets and whether the variable contains only a space are the things that affect whether using a test with or without -n/-z is suitable for checking a variable.

     | 1a    2a    3a    4a    5a    6a   | 1b    2b    3b    4b    5b    6b
     | [     ["    [-n   [-n"  [-z   [-z" | [[    [["   [[-n  [[-n" [[-z  [[-z"
-----+------------------------------------+------------------------------------
unset| false false true  false true  true | false false false false true  true
null | false false true  false true  true | false false false false true  true
space| false true  true  true  true  false| true  true  true  true  false false
zero | true  true  true  true  false false| true  true  true  true  false false
digit| true  true  true  true  false false| true  true  true  true  false false
char | true  true  true  true  false false| true  true  true  true  false false
hyphn| true  true  true  true  false false| true  true  true  true  false false
two  | -err- true  -err- true  -err- false| true  true  true  true  false false
part | -err- true  -err- true  -err- false| true  true  true  true  false false
Tstr | true  true  -err- true  -err- false| true  true  true  true  false false
Fsym | false true  -err- true  -err- false| true  true  true  true  false false
T=   | true  true  -err- true  -err- false| true  true  true  true  false false
F=   | false true  -err- true  -err- false| true  true  true  true  false false
T!=  | true  true  -err- true  -err- false| true  true  true  true  false false
F!=  | false true  -err- true  -err- false| true  true  true  true  false false
Teq  | true  true  -err- true  -err- false| true  true  true  true  false false
Feq  | false true  -err- true  -err- false| true  true  true  true  false false
Tne  | true  true  -err- true  -err- false| true  true  true  true  false false
Fne  | false true  -err- true  -err- false| true  true  true  true  false false

If you want to know if a variable is non-zero length, do any of the following:

• quote the variable in single brackets (column 2a)
• use -n and quote the variable in single brackets (column 4a)
• use double brackets with or without quoting and with or without -n (columns 1b - 4b)

Notice in column 1a starting at the row labeled "two" that the result indicates that [ is evaluating the contents of the variable as if they were part of the conditional expression (the result matches the assertion implied by the "T" or "F" in the description column). When [[ is used (column 1b), the variable content is seen as a string and not evaluated.

The errors in columns 3a and 5a are caused by the fact that the variable value includes a space and the variable is unquoted. Again, as shown in columns 3b and 5b, [[ evaluates the variable's contents as a string.

Correspondingly, for tests for zero-length strings, columns 6a, 5b and 6b show the correct ways to do that. Also note that any of these tests can be negated if negating shows a clearer intent than using the opposite operation. For example: if ! [[ -n $var ]].

If you're using [, the key to making sure that you don't get unexpected results is quoting the variable. Using [[, it doesn't matter.

The error messages, which are being suppressed, are "unary operator expected" or "binary operator expected".

This is the script that produced the table above.

#!/bin/bash
# by Dennis Williamson
# 2010-10-06, revised 2010-11-10
# for http://stackoverflow.com/q/3869072
# designed to fit an 80 character terminal

dw=5    # description column width
w=6     # table column width

t () { printf '%-*s' "$w" " true"; }
f () { [[ $? == 1 ]] && printf '%-*s' "$w" " false" || printf '%-*s' "$w" " -err-"; }

o=/dev/null

echo '     | 1a    2a    3a    4a    5a    6a   | 1b    2b    3b    4b    5b    6b'
echo '     | [     ["    [-n   [-n"  [-z   [-z" | [[    [["   [[-n  [[-n" [[-z  [[-z"'
echo '-----+------------------------------------+------------------------------------'

while read -r d t
do
    printf '%-*s|' "$dw" "$d"

    case $d in
        unset) unset t  ;;
        space) t=' '    ;;
    esac

    [ $t ]        2>$o  && t || f
    [ "$t" ]            && t || f
    [ -n $t ]     2>$o  && t || f
    [ -n "$t" ]         && t || f
    [ -z $t ]     2>$o  && t || f
    [ -z "$t" ]         && t || f
    echo -n "|"
    [[ $t ]]            && t || f
    [[ "$t" ]]          && t || f
    [[ -n $t ]]         && t || f
    [[ -n "$t" ]]       && t || f
    [[ -z $t ]]         && t || f
    [[ -z "$t" ]]       && t || f
    echo

done <<'EOF'
unset
null
space
zero    0
digit   1
char    c
hyphn   -z
two     a b
part    a -a
Tstr    -n a
Fsym    -h .
T=      1 = 1
F=      1 = 2
T!=     1 != 2
F!=     1 != 1
Teq     1 -eq 1
Feq     1 -eq 2
Tne     1 -ne 2
Fne     1 -ne 1
EOF

    $(document).ready(function() {
               var referrer =  document.referrer;

               if(referrer.equals("Setting.jsp")){                     
                   function goBack() {  
                        window.history.go();                            
                    }
               }  
                   if(referrer.equals("http://localhost:8080/Ads/Terms.jsp")){                     
                        window.history.forward();
                        function noBack() {
                        window.history.forward(); 
                    }
                   }
    }); 

using this you can avoid load previous page load

This jQuery plugin (jQuery File Upload Demo) does it without flash, in the form it's using:

<input type='file' name='files[]' multiple />

DECLARE @q nvarchar(4000)
SET @q = 'DECLARE @tmp TABLE (code VARCHAR(50), mount MONEY)
INSERT INTO @tmp
  (
    code,
    mount
  )
SELECT coa_code,
       amount
FROM   T_Ledger_detail

SELECT *
FROM   @tmp'

EXEC sp_executesql @q

If you want in dynamic query

I got this error the very first time I tried to make a provisioning profile by following the Provisioning Assistant and it turns out they fail to mention the WWDR Intermediate Certificate. I installed it and it worked fine for me.

Recursion may well be faster where the alternative is to explicitly manage a stack, like in the sorting or binary tree algorithms you mention.

I've had a case where rewriting a recursive algorithm in Java made it slower.

So the right approach is to first write it in the most natural way, only optimize if profiling shows it is critical, and then measure the supposed improvement.

Looks like the DATEFIRST settings is the only way, but it's not possible to make a SET statement in a scalar/table valued function. Therefore, it becomes very error-prone to the colleagues following your code. (become a trap to the others)

In fact, SQL server datepart function should be improved to accept this as parameter instead.

At the meantime, it looks like using the English Name of the week is the safest choice.

According to the jQuery official documentation

To create a HTML element, $("<div/>") or $("<div></div>") is preferred.

Then you can use either appendTo, append, before, after and etc,. to insert the new element to the DOM.

PS: jQuery Version 1.11.x

Here is an example of iterating over a pd.DataFrame grouped by the column atable. For this sample, "create" statements for an SQL database are generated within the for loop:

import pandas as pd

df1 = pd.DataFrame({
    'atable':     ['Users', 'Users', 'Domains', 'Domains', 'Locks'],
    'column':     ['col_1', 'col_2', 'col_a', 'col_b', 'col'],
    'column_type':['varchar', 'varchar', 'int', 'varchar', 'varchar'],
    'is_null':    ['No', 'No', 'Yes', 'No', 'Yes'],
})

df1_grouped = df1.groupby('atable')

# iterate over each group
for group_name, df_group in df1_grouped:
    print('\nCREATE TABLE {}('.format(group_name))

    for row_index, row in df_group.iterrows():
        col = row['column']
        column_type = row['column_type']
        is_null = 'NOT NULL' if row['is_null'] == 'NO' else ''
        print('\t{} {} {},'.format(col, column_type, is_null))

    print(");")

You can use Array.map to convert each element into a number.

var a = "1,2,3,4";

var b = a.split(',').map(function(item) {
    return parseInt(item, 10);
});

Check the Docs

Or more elegantly as pointed out by User: thg435

var b = a.split(',').map(Number);

Where Number() would do the rest:check here

Note: For older browsers that don't support map, you can add an implementation yourself like:

Array.prototype.map = Array.prototype.map || function(_x) {
    for(var o=[], i=0; i<this.length; i++) { 
        o[i] = _x(this[i]); 
    }
    return o;
};

Starting with C++ 11 you can use proper lambdas. See the other answers for more details.

Old answer: You can, sort-of, but you have to cheat and use a dummy class:

void moo()
{
    class dummy
    {
    public:
         static void a() { printf("I'm in a!\n"); }
    };

    dummy::a();
    dummy::a();
}

Solution:

Add the below line in your application tag:

android:usesCleartextTraffic="true"

As shown below:

<application
    ....
    android:usesCleartextTraffic="true"
    ....>

UPDATE: If you have network security config such as: android:networkSecurityConfig="@xml/network_security_config"

No Need to set clear text traffic to true as shown above, instead use the below code:

<?xml version="1.0" encoding="utf-8"?>
<network-security-config>
    <domain-config cleartextTrafficPermitted="true">
        ....
        ....
    </domain-config>

    <base-config cleartextTrafficPermitted="false"/>
</network-security-config>  

Set the cleartextTrafficPermitted to true

Hope it helps.

Have you tried to edit to see what's wrong (I had the wrong image location)

kubectl edit pods arix-3-yjq9w

or even delete your pod?

kubectl delete arix-3-yjq9w

<?php
//
// A very simple PHP example that sends a HTTP POST to a remote site
//

$ch = curl_init();

curl_setopt($ch, CURLOPT_URL,"http://xxxxxxxx.xxx/xx/xx");
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_POSTFIELDS,
            "dispnumber=567567567&extension=6");
curl_setopt($ch, CURLOPT_HTTPHEADER, array('Content-Type: application/x-www-form-urlencoded'));


// receive server response ...
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);

$server_output = curl_exec ($ch);

curl_close ($ch);

// further processing ....
if ($server_output == "OK") { ... } else { ... }

?>

This will strip all commas from the text and left justify it.

for row in inputfile:
    place = row['your_row_number_here'].strip(', ')

? ????? ??????

I faced with same trouble after brew installs yarn on my MacOs Sierra 10.12.6. (And the first try of installation fall after brew update self with a message " Homebrew must be run under Ruby 2.3! You're running 2.0.0. (RuntimeError)". So I re-run it.)

So I use n manager to reinstall npm.

• switch to another node version (for my case to 8.0) by "n" command with empty parameters
• or install new by "n x.x.x" where x.x.x the node version number (i need 6.9.1)
• delete working version by "n rm x.x.x" where x.x.x the node version number. use sudo if need
• install working version by "n x.x.x" where x.x.x the node version number. use sudo if need
• switch by to the working version of node. (see first step for reference)

I think the trouble can be caused that node was installed under sudo for case.

Using bootstrap with font awesome.

<a class="btn btn-large btn-primary logout" href="#">
        <i class="fa fa-sign-out" aria-hidden="true">Logout</i>
</a>

Old thread still current...

I've edited Daniel Gindi's method to make it possible to use it with buttons etc. as well. If anyone needs rounded corners or wants to combine round corners and a border it has to be set on the view's layer which is passed to this method. I've also set the rasterization to speed it up a little.

+ (UIView*)putView:(UIView*)view insideShadowWithColor:(CGColorRef)color 
                                 andRadius:(CGFloat)shadowRadius 
                                 andOffset:(CGSize)shadowOffset 
                                 andOpacity:(CGFloat)shadowOpacity
{
    // Must have same position like "view"
    UIView *shadow = [[UIView alloc] initWithFrame:view.frame]; 

    shadow.layer.contentsScale = [UIScreen mainScreen].scale;
    shadow.userInteractionEnabled = YES; // Modify this if needed
    shadow.layer.shadowColor = color;
    shadow.layer.shadowOffset = shadowOffset;
    shadow.layer.shadowRadius = shadowRadius;
    shadow.layer.masksToBounds = NO;
    shadow.clipsToBounds = NO;
    shadow.layer.shadowOpacity = shadowOpacity;
    shadow.layer.rasterizationScale = [UIScreen mainScreen].scale;
    shadow.layer.shouldRasterize = YES;

    [view.superview insertSubview:shadow belowSubview:view];
    [shadow addSubview:view];

    // Move view to the top left corner inside the shadowview 
    // ---> Buttons etc are working again :)
    view.frame = CGRectMake(0, 0, view.frame.size.width, view.frame.size.height);

    return shadow;
}

One way to solve this problem, specialization of member functions is to put the specialization into another class, then inherit from that class. You may have to change the order of inheritence to get access to all of the other underlying data but this technique does work.

template< class T, bool condition> struct FooImpl;
template<class T> struct FooImpl<T, true> {
T foo() { return 10; }
};

template<class T> struct FoolImpl<T,false> {
T foo() { return 5; }
};

template< class T >
class Y : public FooImpl<T, boost::is_integer<T> > // whatever your test is goes here.
{
public:
    typedef FooImpl<T, boost::is_integer<T> > inherited;

    // you will need to use "inherited::" if you want to name any of the 
    // members of those inherited classes.
};

The disadvantage of this technique is that if you need to test a lot of different things for different member functions you'll have to make a class for each one, and chain it in the inheritence tree. This is true for accessing common data members.

Ex:

template<class T, bool condition> class Goo;
// repeat pattern above.

template<class T, bool condition>
class Foo<T, true> : public Goo<T, boost::test<T> > {
public:
    typedef Goo<T, boost::test<T> > inherited:
    // etc. etc.
};

Use:

import pymysql

Not:

import PyMySQL

That works for me.

Code updated 2015/04/22.

Zip a whole folder:

// Get real path for our folder
$rootPath = realpath('folder-to-zip');

// Initialize archive object
$zip = new ZipArchive();
$zip->open('file.zip', ZipArchive::CREATE | ZipArchive::OVERWRITE);

// Create recursive directory iterator
/** @var SplFileInfo[] $files */
$files = new RecursiveIteratorIterator(
    new RecursiveDirectoryIterator($rootPath),
    RecursiveIteratorIterator::LEAVES_ONLY
);

foreach ($files as $name => $file)
{
    // Skip directories (they would be added automatically)
    if (!$file->isDir())
    {
        // Get real and relative path for current file
        $filePath = $file->getRealPath();
        $relativePath = substr($filePath, strlen($rootPath) + 1);

        // Add current file to archive
        $zip->addFile($filePath, $relativePath);
    }
}

// Zip archive will be created only after closing object
$zip->close();

Zip a whole folder + delete all files except "important.txt":

// Get real path for our folder
$rootPath = realpath('folder-to-zip');

// Initialize archive object
$zip = new ZipArchive();
$zip->open('file.zip', ZipArchive::CREATE | ZipArchive::OVERWRITE);

// Initialize empty "delete list"
$filesToDelete = array();

// Create recursive directory iterator
/** @var SplFileInfo[] $files */
$files = new RecursiveIteratorIterator(
    new RecursiveDirectoryIterator($rootPath),
    RecursiveIteratorIterator::LEAVES_ONLY
);

foreach ($files as $name => $file)
{
    // Skip directories (they would be added automatically)
    if (!$file->isDir())
    {
        // Get real and relative path for current file
        $filePath = $file->getRealPath();
        $relativePath = substr($filePath, strlen($rootPath) + 1);

        // Add current file to archive
        $zip->addFile($filePath, $relativePath);

        // Add current file to "delete list"
        // delete it later cause ZipArchive create archive only after calling close function and ZipArchive lock files until archive created)
        if ($file->getFilename() != 'important.txt')
        {
            $filesToDelete[] = $filePath;
        }
    }
}

// Zip archive will be created only after closing object
$zip->close();

// Delete all files from "delete list"
foreach ($filesToDelete as $file)
{
    unlink($file);
}

JSONArray jsonArray = new JSONArray();

for (loop) {
    JSONObject jsonObj= new JSONObject();
    jsonObj.put("srcOfPhoto", srcOfPhoto);
    jsonObj.put("username", "name"+count);
    jsonObj.put("userid", "userid"+count);

    jsonArray.put(jsonObj.valueToString());
}

JSONObject parameters = new JSONObject();

parameters.put("action", "remove");

parameters.put("datatable", jsonArray );

parameters.put(Constant.MSG_TYPE , Constant.SUCCESS);

Why were you using an Hashmap if what you wanted was to put it into a JSONObject?

EDIT: As per http://www.json.org/javadoc/org/json/JSONArray.html

EDIT2: On the JSONObject method used, I'm following the code available at: https://github.com/stleary/JSON-java/blob/master/JSONObject.java#L2327 , that method is not deprecated.

We're storing a string representation of the JSONObject, not the JSONObject itself

I worked a little bit the method that Rawling posted here to find more than one line in the same file until the end. This is what worked for me:

                foreach (var line in File.ReadLines(pathToFile))
                {
                    if (line.Contains("CustomerEN") && current == null)
                    {
                        current = new List<string>();
                        current.Add(line);
                    }
                    else if (line.Contains("CustomerEN") && current != null)
                    {
                        current.Add(line);
                    }
                }
                string s = String.Join(",", current);
                MessageBox.Show(s);

That would be to make it difficult for a third-party to insert the JSON response into an HTML document with the <script> tag. Remember that the <script> tag is exempt from the Same Origin Policy.

On a Windows 64 bit machine, echo %programfiles(x86)% does print C:\Program Files (x86)

Thanks Cody heres the c# for ref:

if (e.Button == System.Windows.Forms.MouseButtons.Left)
        {
            DataGridView.HitTestInfo hit = dgv_track.HitTest(e.X, e.Y);
            if (hit.Type == DataGridViewHitTestType.None)
            {
                dgv_track.ClearSelection();
                dgv_track.CurrentCell = null;
            }
        }

I came across this question when trying to check if a file existed on an FTP site or not. If the file doesn't exist there will be an error when trying to check its timestamp. But I want to make sure the error is not something else, by checking its type.

The Response property on WebException will be of type FtpWebResponse on which you can check its StatusCode property to see which FTP error you have.

Here's the code I ended up with:

    public static bool FileExists(string host, string username, string password, string filename)
    {
        // create FTP request
        FtpWebRequest request = (FtpWebRequest)WebRequest.Create("ftp://" + host + "/" + filename);
        request.Credentials = new NetworkCredential(username, password);

        // we want to get date stamp - to see if the file exists
        request.Method = WebRequestMethods.Ftp.GetDateTimestamp;

        try
        {
            FtpWebResponse response = (FtpWebResponse)request.GetResponse();
            var lastModified = response.LastModified;

            // if we get the last modified date then the file exists
            return true;
        }
        catch (WebException ex)
        {
            var ftpResponse = (FtpWebResponse)ex.Response;

            // if the status code is 'file unavailable' then the file doesn't exist
            // may be different depending upon FTP server software
            if (ftpResponse.StatusCode == FtpStatusCode.ActionNotTakenFileUnavailable)
            {
                return false;
            }

            // some other error - like maybe internet is down
            throw;
        }
    }

If I had to guess, you did this:

import datetime

at the top of your code. This means that you have to do this:

datetime.datetime.strptime(date, "%Y-%m-%d")

to access the strptime method. Or, you could change the import statement to this:

from datetime import datetime

and access it as you are.

The people who made the datetime module also named their class datetime:

#module  class    method
datetime.datetime.strptime(date, "%Y-%m-%d")

you should look at multimarkdown http://fletcherpenney.net/multimarkdown/

it has support for metadata (headers, keywords, date, author, etc), tables, asciimath, mathml, hell i'm sure you could stick latex math code right in there. it's basically an extension to markdown to add all these other very useful features. It uses XSLT, so you can easily whip up your own LaTeX styles, and have it directly convert. I use it all the time, and I like it a lot.

I wish the markdown would just incorporate multimarkdown. it would be rather nice.

Edit: Multimarkdown will produce html, latex, and a few other formats. html can come with a style sheet of your choice. it will convert into MathML as well, which displays in Firefox and Safari/Chrome, if I remember correctly.

You can use slicing:

for item in some_list[2:]:
    # do stuff

This will start at the third element and iterate to the end.

pandas >= 0.24

Deprecate your usage of .values in favour of these methods!

From v0.24.0 onwards, we will have two brand spanking new, preferred methods for obtaining NumPy arrays from Index, Series, and DataFrame objects: they are to_numpy(), and .array. Regarding usage, the docs mention:

We haven’t removed or deprecated Series.values or DataFrame.values, but we highly recommend and using .array or .to_numpy() instead.

See this section of the v0.24.0 release notes for more information.

to_numpy() Method

df.index.to_numpy()
# array(['a', 'b'], dtype=object)

df['A'].to_numpy()
#  array([1, 4])

By default, a view is returned. Any modifications made will affect the original.

v = df.index.to_numpy()
v[0] = -1

df
    A  B
-1  1  2
b   4  5

If you need a copy instead, use to_numpy(copy=True);

v = df.index.to_numpy(copy=True)
v[-1] = -123

df
   A  B
a  1  2
b  4  5

Note that this function also works for DataFrames (while .array does not).

array Attribute
This attribute returns an ExtensionArray object that backs the Index/Series.

pd.__version__
# '0.24.0rc1'

# Setup.
df = pd.DataFrame([[1, 2], [4, 5]], columns=['A', 'B'], index=['a', 'b'])
df

   A  B
a  1  2
b  4  5

df.index.array    
# <PandasArray>
# ['a', 'b']
# Length: 2, dtype: object

df['A'].array
# <PandasArray>
# [1, 4]
# Length: 2, dtype: int64

From here, it is possible to get a list using list:

list(df.index.array)
# ['a', 'b']

list(df['A'].array)
# [1, 4]

or, just directly call .tolist():

df.index.tolist()
# ['a', 'b']

df['A'].tolist()
# [1, 4]

Regarding what is returned, the docs mention,

For Series and Indexes backed by normal NumPy arrays, Series.array will return a new arrays.PandasArray, which is a thin (no-copy) wrapper around a numpy.ndarray. arrays.PandasArray isn’t especially useful on its own, but it does provide the same interface as any extension array defined in pandas or by a third-party library.

So, to summarise, .array will return either

1. The existing ExtensionArray backing the Index/Series, or
2. If there is a NumPy array backing the series, a new ExtensionArray object is created as a thin wrapper over the underlying array.

Rationale for adding TWO new methods
These functions were added as a result of discussions under two GitHub issues GH19954 and GH23623.

Specifically, the docs mention the rationale:

[...] with .values it was unclear whether the returned value would be the actual array, some transformation of it, or one of pandas custom arrays (like Categorical). For example, with PeriodIndex, .values generates a new ndarray of period objects each time. [...]

These two functions aim to improve the consistency of the API, which is a major step in the right direction.

Lastly, .values will not be deprecated in the current version, but I expect this may happen at some point in the future, so I would urge users to migrate towards the newer API, as soon as you can.

I am working on JUnit in java 8 environment, using jUnit4.12

for me: compiler was not able to find the method assertNotEquals, even when I used
import org.junit.Assert;

So I changed
assertNotEquals("addb", string);
to
Assert.assertNotEquals("addb", string);

So if you are facing problem regarding assertNotEqual not recognized, then change it to Assert.assertNotEquals(,); it should solve your problem

Actually, even if your variable (SongLength) is numeric, you will still have to format it with %s in order to bind the parameter correctly. If you try to use %d, you will get an error. Here's a small excerpt from this link http://mysql-python.sourceforge.net/MySQLdb.html:

To perform a query, you first need a cursor, and then you can execute queries on it:

c=db.cursor()
max_price=5
c.execute("""SELECT spam, eggs, sausage FROM breakfast
          WHERE price < %s""", (max_price,))

In this example, max_price=5 Why, then, use %s in the string? Because MySQLdb will convert it to a SQL literal value, which is the string '5'. When it's finished, the query will actually say, "...WHERE price < 5".

First you need to include the JSTL tags :-

<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %> 

at the start of the page

I am using UniServer Zero XIV 13.x.x UniController XIV V2.3.1:

From the command line I did this:

mysql> CREATE USER 'pmauser'@'%' IDENTIFIED BY 'MyPasswordHere!';
Query OK, 0 rows affected (0.07 sec)

mysql> GRANT ALL PRIVILEGES ON *.* TO 'pmauser'@'%' WITH GRANT OPTION;
Query OK, 0 rows affected (0.02 sec)

Then I went to C:\...\wamp\ZeroXIV_unicontroller_2_3_1\UniServerZ\home\us_opt1\config.inc.php and modified the file to have this:

/* PMA User advanced features */
//////////$cfg['Servers'][$i]['controluser']    = 'pma';
//////////$cfg['Servers'][$i]['controlpass']    = $password;
$cfg['Servers'][$i]['controluser']    = 'pmauser';
$cfg['Servers'][$i]['controlpass']    = 'MyPasswordHere!';

I restarted Apache and MySQL. The error is gone!

The big-O notation has a companion called small-o notation. The big-O notation says the one function is asymptotical no more than another. To say that one function is asymptotically less than another, we use small-o notation. The difference between the big-O and small-o notations is analogous to the difference between <= (less than equal) and < (less than).

Under Windows only: You may try to use ini_set() function^Docs for the SMTP^Docs and smtp_port^Docs settings:

ini_set('SMTP', 'mysmtphost'); 
ini_set('smtp_port', 25); 

Okay, first things first.

There is no such thing as "variable declaration" or "variable initialization" in Python.

There is simply what we call "assignment", but should probably just call "naming".

Assignment means "this name on the left-hand side now refers to the result of evaluating the right-hand side, regardless of what it referred to before (if anything)".

foo = 'bar' # the name 'foo' is now a name for the string 'bar'
foo = 2 * 3 # the name 'foo' stops being a name for the string 'bar',
# and starts being a name for the integer 6, resulting from the multiplication

As such, Python's names (a better term than "variables", arguably) don't have associated types; the values do. You can re-apply the same name to anything regardless of its type, but the thing still has behaviour that's dependent upon its type. The name is simply a way to refer to the value (object). This answers your second question: You don't create variables to hold a custom type. You don't create variables to hold any particular type. You don't "create" variables at all. You give names to objects.

Second point: Python follows a very simple rule when it comes to classes, that is actually much more consistent than what languages like Java, C++ and C# do: everything declared inside the class block is part of the class. So, functions (def) written here are methods, i.e. part of the class object (not stored on a per-instance basis), just like in Java, C++ and C#; but other names here are also part of the class. Again, the names are just names, and they don't have associated types, and functions are objects too in Python. Thus:

class Example:
    data = 42
    def method(self): pass

Classes are objects too, in Python.

So now we have created an object named Example, which represents the class of all things that are Examples. This object has two user-supplied attributes (In C++, "members"; in C#, "fields or properties or methods"; in Java, "fields or methods"). One of them is named data, and it stores the integer value 42. The other is named method, and it stores a function object. (There are several more attributes that Python adds automatically.)

These attributes still aren't really part of the object, though. Fundamentally, an object is just a bundle of more names (the attribute names), until you get down to things that can't be divided up any more. Thus, values can be shared between different instances of a class, or even between objects of different classes, if you deliberately set that up.

Let's create an instance:

x = Example()

Now we have a separate object named x, which is an instance of Example. The data and method are not actually part of the object, but we can still look them up via x because of some magic that Python does behind the scenes. When we look up method, in particular, we will instead get a "bound method" (when we call it, x gets passed automatically as the self parameter, which cannot happen if we look up Example.method directly).

What happens when we try to use x.data?

When we examine it, it's looked up in the object first. If it's not found in the object, Python looks in the class.

However, when we assign to x.data, Python will create an attribute on the object. It will not replace the class' attribute.

This allows us to do object initialization. Python will automatically call the class' __init__ method on new instances when they are created, if present. In this method, we can simply assign to attributes to set initial values for that attribute on each object:

class Example:
    name = "Ignored"
    def __init__(self, name):
        self.name = name
    # rest as before

Now we must specify a name when we create an Example, and each instance has its own name. Python will ignore the class attribute Example.name whenever we look up the .name of an instance, because the instance's attribute will be found first.

One last caveat: modification (mutation) and assignment are different things!

In Python, strings are immutable. They cannot be modified. When you do:

a = 'hi '
b = a
a += 'mom'

You do not change the original 'hi ' string. That is impossible in Python. Instead, you create a new string 'hi mom', and cause a to stop being a name for 'hi ', and start being a name for 'hi mom' instead. We made b a name for 'hi ' as well, and after re-applying the a name, b is still a name for 'hi ', because 'hi ' still exists and has not been changed.

But lists can be changed:

a = [1, 2, 3]
b = a
a += [4]

Now b is [1, 2, 3, 4] as well, because we made b a name for the same thing that a named, and then we changed that thing. We did not create a new list for a to name, because Python simply treats += differently for lists.

This matters for objects because if you had a list as a class attribute, and used an instance to modify the list, then the change would be "seen" in all other instances. This is because (a) the data is actually part of the class object, and not any instance object; (b) because you were modifying the list and not doing a simple assignment, you did not create a new instance attribute hiding the class attribute.

@firedrawndagger: to list field names/column headers iterate through the recordset Fields collection and insert the name:

Dim myRS as ADODB.Recordset
Dim fld as Field
Dim strFieldName as String 

For Each fld in myRS.Fields
    Activesheet.Selection = fld.Name
    [Some code that moves to next column]
Next

I'm afraid that using map() method of an array may be expensive since entire array is to be iterated. Instead, I combine a new array that consists of three parts:

• head - items before the modified item
• the modified item
• tail - items after the modified item

Here the example I've used in my code (NgRx, yet the machanism is the same for other Redux implementations):

// toggle done property: true to false, or false to true

function (state, action) {
    const todos = state.todos;
    const todoIdx = todos.findIndex(t => t.id === action.id);

    const todoObj = todos[todoIdx];
    const newTodoObj = { ...todoObj, done: !todoObj.done };

    const head = todos.slice(0, todoIdx - 1);
    const tail = todos.slice(todoIdx + 1);
    const newTodos = [...head, newTodoObj, ...tail];
}

I had to figure it out myself but some svgs your need to match the viewBox & width+height in.

E.g. if it already has width="x" height="y" then =>

add <svg ... viewBox="0 0 [width] [height]">

and the opposite.

After that it will scale with <svg ... style="width: xxx; height: yyy;">

The message means that both the packages have functions with the same names. In this particular case, the testthat and assertive packages contain five functions with the same name.

When two functions have the same name, which one gets called?

R will look through the search path to find functions, and will use the first one that it finds.

search()
 ##  [1] ".GlobalEnv"        "package:assertive" "package:testthat" 
 ##  [4] "tools:rstudio"     "package:stats"     "package:graphics" 
 ##  [7] "package:grDevices" "package:utils"     "package:datasets" 
 ## [10] "package:methods"   "Autoloads"         "package:base"

In this case, since assertive was loaded after testthat, it appears earlier in the search path, so the functions in that package will be used.

is_true
## function (x, .xname = get_name_in_parent(x)) 
## {
##     x <- coerce_to(x, "logical", .xname)
##     call_and_name(function(x) {
##         ok <- x & !is.na(x)
##         set_cause(ok, ifelse(is.na(x), "missing", "false"))
##     }, x)
## }
<bytecode: 0x0000000004fc9f10>
<environment: namespace:assertive.base>

The functions in testthat are not accessible in the usual way; that is, they have been masked.

What if I want to use one of the masked functions?

You can explicitly provide a package name when you call a function, using the double colon operator, ::. For example:

testthat::is_true
## function () 
## {
##     function(x) expect_true(x)
## }
## <environment: namespace:testthat>

How do I suppress the message?

If you know about the function name clash, and don't want to see it again, you can suppress the message by passing warn.conflicts = FALSE to library.

library(testthat)
library(assertive, warn.conflicts = FALSE)
# No output this time

Alternatively, suppress the message with suppressPackageStartupMessages:

library(testthat)
suppressPackageStartupMessages(library(assertive))
# Also no output

Impact of R's Startup Procedures on Function Masking

If you have altered some of R's startup configuration options (see ?Startup) you may experience different function masking behavior than you might expect. The precise order that things happen as laid out in ?Startup should solve most mysteries.

For example, the documentation there says:

Note that when the site and user profile files are sourced only the base package is loaded, so objects in other packages need to be referred to by e.g. utils::dump.frames or after explicitly loading the package concerned.

Which implies that when 3rd party packages are loaded via files like .Rprofile you may see functions from those packages masked by those in default packages like stats, rather than the reverse, if you loaded the 3rd party package after R's startup procedure is complete.

How do I list all the masked functions?

First, get a character vector of all the environments on the search path. For convenience, we'll name each element of this vector with its own value.

library(dplyr)
envs <- search() %>% setNames(., .)

For each environment, get the exported functions (and other variables).

fns <- lapply(envs, ls)

Turn this into a data frame, for easy use with dplyr.

fns_by_env <- data_frame(
  env = rep.int(names(fns), lengths(fns)),
  fn  = unlist(fns)
)

Find cases where the object appears more than once.

fns_by_env %>% 
  group_by(fn) %>% 
  tally() %>% 
  filter(n > 1) %>% 
  inner_join(fns_by_env)

To test this, try loading some packages with known conflicts (e.g., Hmisc, AnnotationDbi).

How do I prevent name conflict bugs?

The conflicted package throws an error with a helpful error message, whenever you try to use a variable with an ambiguous name.

library(conflicted)
library(Hmisc)
units
## Error: units found in 2 packages. You must indicate which one you want with ::
##  * Hmisc::units
##  * base::units

Method __str__ should return string, not print.

def __str__(self):
    return 'Memo={0}, Tag={1}'.format(self.memo, self.tags)

You forgot the .class:

if (value.getClass() == Integer.class) {
    System.out.println("This is an Integer");
} 
else if (value.getClass() == String.class) {
    System.out.println("This is a String");
}
else if (value.getClass() == Float.class) {
    System.out.println("This is a Float");
}

Note that this kind of code is usually the sign of a poor OO design.

Also note that comparing the class of an object with a class and using instanceof is not the same thing. For example:

"foo".getClass() == Object.class

is false, whereas

"foo" instanceof Object

is true.

Whether one or the other must be used depends on your requirements.

isinstance(your_object, basestring)

will be True if your object is indeed a string-type. 'str' is reserved word.

my apologies, the correct answer is using 'basestring' instead of 'str' in order of it to include unicode strings as well - as been noted above by one of the other responders.

WKWebView: I find this question to be the best place to let people know that they should start using WKWebview as UIWebView is now deprecated.

Objective C

WKWebView *webView = [[WKWebView alloc] initWithFrame:self.view.frame];
webView.navigationDelegate = self;
NSURL *nsurl=[NSURL URLWithString:@"https://www.example.com/document.pdf"];
NSURLRequest *nsrequest=[NSURLRequest requestWithURL:nsurl];
[webView loadRequest:nsrequest];
[self.view addSubview:webView];

Swift

let myURLString = "https://www.example.com/document.pdf"
let url = NSURL(string: myURLString)
let request = NSURLRequest(URL: url!)  
let webView = WKWebView(frame: self.view.frame)
webView.navigationDelegate = self
webView.loadRequest(request)
view.addSubview(webView)

I haven't copied this code directly from Xcode, so it might, it might contain some syntax error. Please check while using it.

Yes, but you can select only one column in your subselect

SELECT (SELECT id FROM bla) AS my_select FROM bla2

iO8 has removed support for the iframe seamless attribute.

• Tested in Safari, HomeScreen, new WKWebView and UIWebView.

Full Details and performance review of other iOS 8 changes:

• iOS8 changes on Cordova mailing list
• Sencha.com Blog : Apple Shows Love for HTML5 with iOS 8

Example: button.titleLabel?.font = UIFont(name: "HelveticaNeue-Bold", size: 12)

• If you want to use defaul font from it's own family, use for example: "HelveticaNeue"
• If you want to specify family font, use for example: "HelveticaNeue-Bold"

basically the to_char(sysdate,'DDD') returns no of days from 1-jan-yyyy to sysdate so that if subtract two dates it will return that,you will get difference between two dates

select to_char(sysdate,'DDD') -to_char(to_date('19-08-1995','dd-mm-yyyy'),'DDD') from dual;

iReports Custom Fields for columns (sum, average, etc)

1. Right-Click on Variables and click Create Variable

2. Click on the new variable

   a. Notice the properties on the right

3. Rename the variable accordingly

4. Change the Value Class Name to the correct Data Type

   a. You can search by clicking the 3 dots

5. Select the correct type of calculation

6. Change the Expression

   a. Click the little icon

   b. Select the column you are looking to do the calculation for

   c. Click finish

7. Set Initial Value Expression to 0

8. Set the increment type to none

9. Leave Incrementer Factory Class Name blank

10. Set the Reset Type (usually report)

11. Drag a new Text Field to stage (Usually in Last Page Footer, or Column Footer)

12. Double Click the new Text Field
13. Clear the expression “Text Field”

14. Select the new variable

15. Click finish

16. Put the new text in a desirable position ?

A class based clean to use solution:

import signal
import time

class GracefulKiller:
  kill_now = False
  def __init__(self):
    signal.signal(signal.SIGINT, self.exit_gracefully)
    signal.signal(signal.SIGTERM, self.exit_gracefully)

  def exit_gracefully(self,signum, frame):
    self.kill_now = True

if __name__ == '__main__':
  killer = GracefulKiller()
  while not killer.kill_now:
    time.sleep(1)
    print("doing something in a loop ...")

  print("End of the program. I was killed gracefully :)")

Similar to other answers, I wanted to ensure my ASP.NET Core 2.1 environment setting persisted across deployments, but also only applied to the specific site.

According to Microsoft's documentation, it is possible to set the environment variable on the app pool using the following PowerShell command in IIS 10:

$appPoolName = "AppPool"
$envName = "Development"
cd "$env:SystemRoot\system32\inetsrv"
.\appcmd.exe set config -section:system.applicationHost/applicationPools /+"[name='$appPoolName'].environmentVariables.[name='ASPNETCORE_ENVIRONMENT',value='$envName']" /commit:apphost

I unfortunately still have to use IIS 8.5 and thought I was out of luck. However, it is still possible to run a simple PowerShell script to set a site-specific environment variable value for ASPNETCORE_ENVIRONMENT:

Import-Module -Name WebAdministration
$siteName = "Site"
$envName = "Development"
Set-WebConfigurationProperty -PSPath IIS:\ -Location $siteName -Filter /system.webServer/aspNetCore/environmentVariables -Name . -Value @{ Name = 'ASPNETCORE_ENVIRONMENT'; Value = $envName }

You should use a datastore and proxy in ExtJs. There are plenty of examples of this, and the JSON reader automatically parses the JSON message into the model you specified.

There is no need to use basic Javascript when using ExtJs, everything is different, you should use the ExtJs ways to get everything right. Read there documentation carefully, it's good.

By the way, these examples also hold for Sencha Touch (especially v2), which is based on the same core functions as ExtJs.

<html>
<head>
<script type="text/javascript">
    $(document).ready(function(){
    $("#content").attr("src","http://vnexpress.net");
})
</script>
</head>
<body>
<iframe id="content"></div>
</body>
</html>

For Django 2:

from django.utils.deprecation import MiddlewareMixin


class DisableCSRF(MiddlewareMixin):
    def process_request(self, request):
        setattr(request, '_dont_enforce_csrf_checks', True)

That middleware must be added to settings.MIDDLEWARE when appropriate (in your test settings for example).

Note: the setting isn't not called MIDDLEWARE_CLASSES anymore.

R.id.button is not part of R.layout.activity_main. How should the activity find it in the content view?

The layout that contains the button is displayed by the Fragment, so you have to get the Button there, in the Fragment.

Do you mean tmux window? Ctrl + b + , if you have C-b as send prefix (it's by default)

Also C-b :rename-window <new name> and tmux rename-window <new name> work too.

As I know you can't rename pane

Get all classes by part of Namespace name in just one row:

var allClasses = Assembly.GetExecutingAssembly().GetTypes().Where(a => a.IsClass && a.Namespace != null && a.Namespace.Contains(@"..your namespace...")).ToList();

Does it have to be String.Format?

This looks like a job for String.Padleft

myString=myString.PadLeft(3, '0');

Or, if you are converting direct from an int:

myInt.toString("D3");

Here's one sample: http://jsfiddle.net/CUUfb/1/

This error can be due to many many things.

The key here seems the hint about error reading. I see you are working on a flash drive or something similar? Try to run the install on a local folder owned by your current user.

You could also try with sudo, that might solve a permission problem if that's the case.

Another reason why it cannot read could be because it has not downloaded correctly, or saved correctly. A little problem in your network could have caused that, and the cache clean would remove the files and force a refetch but that does not solve your problem. That means it would be more on the save part, maybe it didn't save because of permissions, maybe it didn't not save correctly because it was lacking disk space...

DataSet is collection of DataTables.... you can get the datatable from DataSet as below.

//here ds is dataset
DatTable dt = ds.Table[0]; /// table of dataset

The above method works good.

Another method (I am assuming web here) is to create your page. Add controls to the page. Then while in design mode go to: Tools > Generate Local Resource. A resource file will automatically appear in the solution with all the controls in the page mapped in the resource file.

To create resources for other languages, append the 4 character language to the end of the file name, before the extension (Account.aspx.en-US.resx, Account.aspx.es-ES.resx...etc).

To retrieve specific entries in the code-behind, simply call this method: GetLocalResourceObject([resource entry key/name]).

I know this was asked awhile back, but I found a comprehensive list of the virtual keyboard key codes right in MSDN, for use in C/C++. This also includes the mouse events. Note it is different than the javascript key codes (I noticed it around the VK_OEM section).

Here's the link:
http://msdn.microsoft.com/en-us/library/windows/desktop/dd375731(v=vs.85).aspx

I'm not sure why previous answers haven't suggested that the original poster set up a shell profile (bashrc, .tcshrc, etc.) that executed their commands automatically every time they log in on the server side.

The quest that brought me to this page for help was a bit different -- I wanted multiple PuTTY shortcuts for the same host that would execute different startup commands.

I came up with two solutions, both of which worked:

(background) I have a folder with a variety of PuTTY shortcuts, each with the "target" property in the shortcut tab looking something like:

"C:\Program Files (x86)\PuTTY\putty.exe" -load host01

with each load corresponding to a PuTTY profile I'd saved (with different hosts in the "Session" tab). (Mostly they only differ in color schemes -- I like to have each group of related tasks share a color scheme in the terminal window, with critical tasks, like logging in as root on a production system, performed only in distinctly colored windows.)

The folder's Windows properties are set to very clean and stripped down -- it functions as a small console with shortcut icons for each of my frequent remote PuTTY and RDP connections.

(solution 1) As mentioned in other answers the -m switch is used to configure a script on the Windows side to run, the -t switch is used to stay connected, but I found that it was order-sensitive if I wanted to get it to run without exiting

What I finally got to work after a lot of trial and error was:

(shortcut target field):

"C:\Program Files (x86)\PuTTY\putty.exe" -t -load "SSH Proxy" -m "C:\Users\[me]\Documents\hello-world-bash.txt"

where the file being executed looked like

echo "Hello, World!"
echo ""
export PUTTYVAR=PROXY
/usr/local/bin/bash

(no semicolons needed)

This runs the scripted command (in my case just printing "Hello, world" on the terminal) and sets a variable that my remote session can interact with.

Note for debugging: when you run PuTTY it loads the -m script, if you edit the script you need to re-launch PuTTY instead of just restarting the session.

(solution 2) This method feels a lot cleaner, as the brains are on the remote Unix side instead of the local Windows side:

From Putty master session (not "edit settings" from existing session) load a saved config and in the SSH tab set remote command to:

export PUTTYVAR=GREEN; bash -l

Then, in my .bashrc, I have a section that performs different actions based on that variable:

case ${PUTTYVAR} in
  "")
    echo "" 
    ;;
  "PROXY")
    # this is the session config with all the SSH tunnels defined in it
    echo "";
    echo "Special window just for holding tunnels open." ;
    echo "";
    PROMPT_COMMAND='echo -ne "\033]0;Proxy Session @master01\$\007"'
    alias temppass="ssh keyholder.example.com makeonetimepassword"
    alias | grep temppass
    ;;
  "GREEN")
    echo "";
    echo "It's not easy being green"
    ;;
  "GRAY")
    echo ""
    echo "The gray ghost"
    ;;
  *)
    echo "";
    echo "Unknown PUTTYVAR setting ${PUTTYVAR}"
    ;;
esac

(solution 3, untried)

It should also be possible to have bash skip my .bashrc and execute a different startup script, by putting this in the PuTTY SSH command field:

bash --rcfile .bashrc_variant -l 

The args parameter stores all command line arguments which are given by the user when you run the program.

If you run your program from the console like this:

program.exe there are 4 parameters

Your args parameter will contain the four strings: "there", "are", "4", and "parameters"

Here is an example of how to access the command line arguments from the args parameter: example

You could try my little options header (166 loc so easily hackable) options.hpp. It is a single header implementation and should do what you ask. It also prints you the help page automatically.

The FASTEST way, to see all parents, and IN ORDER, just use the built in __mro__

i.e. repr(YOUR_CLASS.__mro__)

>>>
>>>
>>> import getpass
>>> getpass.GetPassWarning.__mro__

outputs, IN ORDER

(<class 'getpass.GetPassWarning'>, <type 'exceptions.UserWarning'>,
<type 'exceptions.Warning'>, <type 'exceptions.Exception'>, 
<type 'exceptions.BaseException'>, <type 'object'>)
>>>

There you have it. The "best" answer right now, has 182 votes (as I am typing this) but this is SO much simpler than some convoluted for loop, looking into bases one class at a time, not to mention when a class extends TWO or more parent classes. Importing and using inspect just clouds the scope unnecessarily. It honestly is a shame people don't know to just use the built-ins

I Hope this Helps!

You should be able to use

IIF(Fields!ExitReason.Value = 7, 1, 0)

http://msdn.microsoft.com/en-us/library/ms157328.aspx

All the answers are outdated. It is best to use picasso for such purposes. It has a lot of features including background image processing.

Did I mention it is super easy to use:

Picasso.with(context).load(new File(...)).into(imageView);

For this question many of the answers I have seen are clunky, hard to implement and inefficient so I thought I'd take a shot at it and come up with my own solution which is just a tiny bit of css and html

html,_x000D_
body {_x000D_
  height: 100%;_x000D_
  margin: 0;_x000D_
}_x000D_
.body {_x000D_
  min-height: calc(100% - 2rem);_x000D_
  width: 100%;_x000D_
  background-color: grey;_x000D_
}_x000D_
.footer {_x000D_
  height: 2rem;_x000D_
  width: 100%;_x000D_
  background-color: yellow;_x000D_
}

<body>_x000D_
  <div class="body">test as body</div>_x000D_
  <div class="footer">test as footer</div>_x000D_
</body>

this works by setting the height of the footer and then using css calc to work out the minimum height the page can be with the footer still at the bottom, hope this helps some people :)

For the correct solution after many hours:

1. Open the configuration file
2. Change the connection string with the following

<add name="umbracoDbDSN" connectionString="data source=YOUR_SERVER_NAME;database=nrc;Integrated Security=SSPI;persist security info=True;" providerName="System.Data.SqlClient" />

3. Change the YOUR_SERVER_NAME with your current server name and save
4. Open the IIS Manager
5. Find the name of the application pool that the website or web application is using
6. Right-click and choose Advanced settings
7. From Advanced settings under Process Model change the Identity to Custom account and add your Server Admin details, please see the attached images:

Hope this will help.

I know this is a year old but I was curious about this myself and I'm sure others will find their way here. The simple answer is no, as others have said before me. An element can't have more than one ID and an ID can't be used more than once in a page. Try it out and you'll see how well it doesn't work.

In reponse to tvanfosson's answer regarding the use of the same ID in two different elements. As far as I'm aware an ID can only be used once in a page regardless of whether it's attached to a different tag.

By definition, an element needing an ID should be unique but if you need two ID's then it's not really unique and needs a class instead.

The following Query also works and you won't need an update query if that's what you'd prefer:

IIF(Column Is Null,0,Column)

To check with current branch:

git diff -- projects/components/some.component.ts ... origin
git diff -- projects/components/some.component.html ... origin

To check with some other branch say staging:

git diff -- projects/components/some.component.ts ... origin/staging
git diff -- projects/components/some.component.html ... origin/staging

This can also be done in CSS, for more customisability:

.hoverable {
  position: relative;
}

.hoverable>.hoverable__tooltip {
  display: none;
}

.hoverable:hover>.hoverable__tooltip {
  display: inline;
  position: absolute;
  top: 1em;
  left: 1em;
  background: #888;
  border: 1px solid black;
}

<div class="hoverable">
  <span class="hoverable__main">Main text</span>
  <span class="hoverable__tooltip">Hover text</span>
</div>

(Obviously, styling can be improved)

DO NOT have a wrapper that creates a new instance of HttpClient. If you do that, you will run out of sockets at runtime (even though you are disposing the HttpClient object).

If using MOQ, the correct way to do this is to add using Moq.Protected; to your test and then write code like the following:

var response = new HttpResponseMessage(HttpStatusCode.OK)
{
    Content = new StringContent("It worked!")
};
var mockHttpMessageHandler = new Mock<HttpMessageHandler>();
mockHttpMessageHandler
    .Protected()
    .Setup<Task<HttpResponseMessage>>(
        "SendAsync",
        ItExpr.IsAny<HttpRequestMessage>(),
        ItExpr.IsAny<CancellationToken>())
    .ReturnsAsync(() => response);


var httpClient = new HttpClient(mockHttpMessageHandler.Object);

I still like the way Perl handles fields with white space.
First field is $F[0].

$ ps axu | grep dbus | perl -lane 'print $F[4]'

You can use URL, URLRequest and URLSession or NSURLConnection as you'd normally do in Objective-C. Note that for iOS 7.0 and later, URLSession is preferred.

Using URLSession

Initialize a URL object and a URLSessionDataTask from URLSession. Then run the task with resume().

let url = URL(string: "http://www.stackoverflow.com")!

let task = URLSession.shared.dataTask(with: url) {(data, response, error) in
    guard let data = data else { return }
    print(String(data: data, encoding: .utf8)!)
}

task.resume()

Using NSURLConnection

First, initialize a URL and a URLRequest:

let url = URL(string: "http://www.stackoverflow.com")!
var request = URLRequest(url: url)
request.httpMethod = "POST" 

Then, you can load the request asynchronously with:

NSURLConnection.sendAsynchronousRequest(request, queue: OperationQueue.main) {(response, data, error) in
    guard let data = data else { return }
    print(String(data: data, encoding: .utf8)!)
}

Or you can initialize an NSURLConnection:

let connection = NSURLConnection(request: request, delegate:nil, startImmediately: true)

Just make sure to set your delegate to something other than nil and use the delegate methods to work with the response and data received.

For more detail, check the documentation for the NSURLConnectionDataDelegate protocol

Testing on an Xcode playground

If you want to try this code on a Xcode playground, add import PlaygroundSupport to your playground, as well as the following call:

PlaygroundPage.current.needsIndefiniteExecution = true

This will allow you to use asynchronous code in playgrounds.

import math
math.sqrt( x )

It is a trivial addition to the answer chain. However since the Subject is very common google hit, this deserves to be added, I believe.

That's HTML, but yes, you can bang pretty much any selectors you like together.

#x.y { }

(And the HTML is fine too)

If you already haven't done it, try adding "SDK Path\Include" to:

Project ? Preferences ? C/C++ ? General ? Additional Include Directories

And add "SDK Path\Lib" to:

Project ? Preferences ? Linker ? General ? Additional Library Directories

Also, try to change "Windows.h" to <windows.h>

If won't help, check the physical existence of the file, it should be in "\VC\PlatformSDK\Include" folder in your Visual Studio install directory.

For Files - svn revert filename

For Folders - svn revert -R folder

use this input attribute events

onfocus="(this.type='date')" onblur="(this.type='text')"

<link rel="stylesheet" href="https://stackpath.bootstrapcdn.com/bootstrap/4.3.1/css/bootstrap.min.css" integrity="sha384-ggOyR0iXCbMQv3Xipma34MD+dH/1fQ784/j6cY/iJTQUOhcWr7x9JvoRxT2MZw1T" crossorigin="anonymous">_x000D_
_x000D_
<div class="container mt-3">_x000D_
  <label for="date">Date : </label>_x000D_
  <input placeholder="Your Date" class="form-control" type="text" onfocus="(this.type='date')" onblur="(this.type='text')" id="date">_x000D_
</div>

Try the following:

=IF(OR(E2="in play",E2="pre play",E2="complete",E2="suspended"),
IF(E2="in play",IF(F2="closed",3,IF(F2="suspended",2,IF(ISBLANK(F2),1,-2))),
IF(E2="pre play",IF(ISBLANK(F2),-1,-2),IF(E2="completed",IF(F2="closed",2,-2),
IF(E2="suspended",IF(ISBLANK(F2),3,-2))))),-2)

Here is another simple way of doing this, by adding width 20% to every col-xs-2:

<div class="col-xs-12">
     <div class="col-xs-2" style="width:20%;" id="p1">One</div>
     <div class="col-xs-2" style="width:20%;" id="p2">Two</div>
     <div class="col-xs-2" style="width:20%;" id="p3">Three</div>
     <div class="col-xs-2" style="width:20%;" id="p4">Four</div>
     <div class="col-xs-2" style="width:20%;" id="p5">Five</div>
</div>

In your expected output, you've got the second last row sum incorrect, it should be 40 according to the data in your tables, but here is the query:

Select  ChargeNum, CategoryId, Sum(Hours)
From    (
    Select  ChargeNum, CategoryId, Hours
    From    KnownHours
    Union
    Select  ChargeNum, 'Unknown' As CategoryId, Hours
    From    UnknownHours
) As a
Group By ChargeNum, CategoryId
Order By ChargeNum, CategoryId

And here is the output:

ChargeNum  CategoryId 
---------- ---------- ----------------------
111111     1          40
111111     2          50
111111     Unknown    70
222222     1          40
222222     Unknown    25.5

Take your pick:

def my_view(request):

    if request.method == 'POST':
        print request.POST.get('my_field')

        form = MyForm(request.POST)

        print form['my_field'].value()
        print form.data['my_field']

        if form.is_valid():

            print form.cleaned_data['my_field']
            print form.instance.my_field

            form.save()
            print form.instance.id  # now this one can access id/pk

Note: the field is accessed as soon as it's available.

if you have CRUD (index) and you need set default sorting your controller for GridView, or ListView, or more... Example

public function actionIndex()
{
    $searchModel = new NewsSearch();
    $dataProvider = $searchModel->search(Yii::$app->request->queryParams);
    // set default sorting
    $dataProvider->sort->defaultOrder = ['id' => SORT_DESC];

    return $this->render('index', [
        'searchModel' => $searchModel,
        'dataProvider' => $dataProvider,
    ]);
}

you need add

$dataProvider->sort->defaultOrder = ['id' => SORT_DESC];

If you need to convert some of them to numbers and don't know in advance which ones, some additional code will be needed. Try something like this:

b = []
for x in a:
    temp = []
    items = x.split(",")
    for item in items:
        try:
            n = int(item)
        except ValueError:
            temp.append(item)
        else:
            temp.append(n)
    b.append(temp)

This is longer than the other answers, but it's more versatile.

toast is a bad idea, it's far too "complex" to print the value of a variable. use log or s.o.p, and as drawnonward already said, their output goes to logcat. it only makes sense if you want to expose this information to the end-user...

IN:

• Works on List result set
• Doesn’t work on subqueries resulting in Virtual tables with multiple columns
• Compares every value in the result list
• Performance is comparatively SLOW for larger result set of subquery

EXISTS:

• Works on Virtual tables
• Is used with co-related queries
• Exits comparison when match is found
• Performance is comparatively FAST for larger result set of subquery

cache:true only works with GET and HEAD request.

You could roll your own solution as you said with something along these lines :

var localCache = {
    data: {},
    remove: function (url) {
        delete localCache.data[url];
    },
    exist: function (url) {
        return localCache.data.hasOwnProperty(url) && localCache.data[url] !== null;
    },
    get: function (url) {
        console.log('Getting in cache for url' + url);
        return localCache.data[url];
    },
    set: function (url, cachedData, callback) {
        localCache.remove(url);
        localCache.data[url] = cachedData;
        if ($.isFunction(callback)) callback(cachedData);
    }
};

$(function () {
    var url = '/echo/jsonp/';
    $('#ajaxButton').click(function (e) {
        $.ajax({
            url: url,
            data: {
                test: 'value'
            },
            cache: true,
            beforeSend: function () {
                if (localCache.exist(url)) {
                    doSomething(localCache.get(url));
                    return false;
                }
                return true;
            },
            complete: function (jqXHR, textStatus) {
                localCache.set(url, jqXHR, doSomething);
            }
        });
    });
});

function doSomething(data) {
    console.log(data);
}

Working fiddle here

EDIT: as this post becomes popular, here is an even better answer for those who want to manage timeout cache and you also don't have to bother with all the mess in the $.ajax() as I use $.ajaxPrefilter(). Now just setting {cache: true} is enough to handle the cache correctly :

var localCache = {
    /**
     * timeout for cache in millis
     * @type {number}
     */
    timeout: 30000,
    /** 
     * @type {{_: number, data: {}}}
     **/
    data: {},
    remove: function (url) {
        delete localCache.data[url];
    },
    exist: function (url) {
        return !!localCache.data[url] && ((new Date().getTime() - localCache.data[url]._) < localCache.timeout);
    },
    get: function (url) {
        console.log('Getting in cache for url' + url);
        return localCache.data[url].data;
    },
    set: function (url, cachedData, callback) {
        localCache.remove(url);
        localCache.data[url] = {
            _: new Date().getTime(),
            data: cachedData
        };
        if ($.isFunction(callback)) callback(cachedData);
    }
};

$.ajaxPrefilter(function (options, originalOptions, jqXHR) {
    if (options.cache) {
        var complete = originalOptions.complete || $.noop,
            url = originalOptions.url;
        //remove jQuery cache as we have our own localCache
        options.cache = false;
        options.beforeSend = function () {
            if (localCache.exist(url)) {
                complete(localCache.get(url));
                return false;
            }
            return true;
        };
        options.complete = function (data, textStatus) {
            localCache.set(url, data, complete);
        };
    }
});

$(function () {
    var url = '/echo/jsonp/';
    $('#ajaxButton').click(function (e) {
        $.ajax({
            url: url,
            data: {
                test: 'value'
            },
            cache: true,
            complete: doSomething
        });
    });
});

function doSomething(data) {
    console.log(data);
}

And the fiddle here CAREFUL, not working with $.Deferred

Here is a working but flawed implementation working with deferred:

var localCache = {
    /**
     * timeout for cache in millis
     * @type {number}
     */
    timeout: 30000,
    /** 
     * @type {{_: number, data: {}}}
     **/
    data: {},
    remove: function (url) {
        delete localCache.data[url];
    },
    exist: function (url) {
        return !!localCache.data[url] && ((new Date().getTime() - localCache.data[url]._) < localCache.timeout);
    },
    get: function (url) {
        console.log('Getting in cache for url' + url);
        return localCache.data[url].data;
    },
    set: function (url, cachedData, callback) {
        localCache.remove(url);
        localCache.data[url] = {
            _: new Date().getTime(),
            data: cachedData
        };
        if ($.isFunction(callback)) callback(cachedData);
    }
};

$.ajaxPrefilter(function (options, originalOptions, jqXHR) {
    if (options.cache) {
        //Here is our identifier for the cache. Maybe have a better, safer ID (it depends on the object string representation here) ?
        // on $.ajax call we could also set an ID in originalOptions
        var id = originalOptions.url+ JSON.stringify(originalOptions.data);
        options.cache = false;
        options.beforeSend = function () {
            if (!localCache.exist(id)) {
                jqXHR.promise().done(function (data, textStatus) {
                    localCache.set(id, data);
                });
            }
            return true;
        };

    }
});

$.ajaxTransport("+*", function (options, originalOptions, jqXHR, headers, completeCallback) {

    //same here, careful because options.url has already been through jQuery processing
    var id = originalOptions.url+ JSON.stringify(originalOptions.data);

    options.cache = false;

    if (localCache.exist(id)) {
        return {
            send: function (headers, completeCallback) {
                completeCallback(200, "OK", localCache.get(id));
            },
            abort: function () {
                /* abort code, nothing needed here I guess... */
            }
        };
    }
});

$(function () {
    var url = '/echo/jsonp/';
    $('#ajaxButton').click(function (e) {
        $.ajax({
            url: url,
            data: {
                test: 'value'
            },
            cache: true
        }).done(function (data, status, jq) {
            console.debug({
                data: data,
                status: status,
                jqXHR: jq
            });
        });
    });
});

Fiddle HERE Some issues, our cache ID is dependent of the json2 lib JSON object representation.

Use Console view (F12) or FireBug to view some logs generated by the cache.

The code doesn't work because elapsed variable in getElapsedTimeSecs() is not a float or double.

I did a quick experiment after looking at a number of potential solutions all over the place. This is what I ended up with:

http://jsbin.com/hapelawake

You can try this force-download script. Even if you don't use it, it'll probably point you in the right direction:

<?php

$filename = $_GET['file'];

// required for IE, otherwise Content-disposition is ignored
if(ini_get('zlib.output_compression'))
  ini_set('zlib.output_compression', 'Off');

// addition by Jorg Weske
$file_extension = strtolower(substr(strrchr($filename,"."),1));

if( $filename == "" ) 
{
  echo "<html><title>eLouai's Download Script</title><body>ERROR: download file NOT SPECIFIED. USE force-download.php?file=filepath</body></html>";
  exit;
} elseif ( ! file_exists( $filename ) ) 
{
  echo "<html><title>eLouai's Download Script</title><body>ERROR: File not found. USE force-download.php?file=filepath</body></html>";
  exit;
};
switch( $file_extension )
{
  case "pdf": $ctype="application/pdf"; break;
  case "exe": $ctype="application/octet-stream"; break;
  case "zip": $ctype="application/zip"; break;
  case "doc": $ctype="application/msword"; break;
  case "xls": $ctype="application/vnd.ms-excel"; break;
  case "ppt": $ctype="application/vnd.ms-powerpoint"; break;
  case "gif": $ctype="image/gif"; break;
  case "png": $ctype="image/png"; break;
  case "jpeg":
  case "jpg": $ctype="image/jpg"; break;
  default: $ctype="application/octet-stream";
}
header("Pragma: public"); // required
header("Expires: 0");
header("Cache-Control: must-revalidate, post-check=0, pre-check=0");
header("Cache-Control: private",false); // required for certain browsers 
header("Content-Type: $ctype");
// change, added quotes to allow spaces in filenames, by Rajkumar Singh
header("Content-Disposition: attachment; filename=\"".basename($filename)."\";" );
header("Content-Transfer-Encoding: binary");
header("Content-Length: ".filesize($filename));
readfile("$filename");
exit();

You can use a std::map to map the input to your enum:

#include <iostream>
#include <string>
#include <map>
using namespace std;

enum level {easy, medium, hard};
map<string, level> levels;

void register_levels()
{
    levels["easy"]   = easy;
    levels["medium"] = medium;
    levels["hard"]   = hard;
}

int main()
{
    register_levels();
    string input;
    cin >> input;
    switch( levels[input] )
    {
    case easy:
        cout << "easy!"; break;
    case medium:
        cout << "medium!"; break;
    case hard:
        cout << "hard!"; break;
    }
}

Simple way is

ArrayList<Dog> dogs = getDogs();
ArrayList<Dog> clonedList = new ArrayList<Dog>(dogs);

Dictionary<string, List<string>> dictionary = new Dictionary<string,List<string>>();

foreach(string key in keys) {
    if(!dictionary.ContainsKey(key)) {
        //add
        dictionary.Add(key, new List<string>());
    }
    dictionary[key].Add("theString");
}

If the key doesn't exist, a new List is added (inside if). Else the key exists, so just add a new value to the List under that key.

In Java class :-

    toolbar = (Toolbar) findViewById(R.id.apptool_bar);
    setSupportActionBar(toolbar);

    getSupportActionBar().setTitle("Snapdeal");

    getSupportActionBar().setHomeButtonEnabled(true);
    getSupportActionBar().setDisplayHomeAsUpEnabled(true);

In Manifest :-

<activity
            android:name=".SubActivity"
            android:label="@string/title_activity_sub"
            android:theme="@style/AppTheme" >
            <meta-data android:name="android.support.PARENT_ACTIVITY" android:value=".MainActivity"></meta-data>
    </activity>

It will help you

i'm using python 2.7 in win 8 too but no problem with that. maybe you need to reastart your computer like wclear said, or you can run python command line program that included in python installation folder, i think below IDLE program. hope it help.

Fur future readers, if you are using Angular 1.6, you also need to change the hashPrefix:

appModule.config(['$locationProvider', function($locationProvider) {
    $locationProvider.html5Mode(true);
    $locationProvider.hashPrefix('');
}]);

Don't forget to set the base in your HTML <head>:

<head>
    <base href="/">
    ...
</head>

More info about the changelog here.

CSS3 filters currently work only in webkit browsers (safari and chrome).

An optional way if you want to use pure Python:

ElementTree is good for most cases, but it can't CData and pretty print.

So, if you need CData and pretty print you should use minidom:

minidom_example.py:

from xml.dom import minidom

doc = minidom.Document()

root = doc.createElement('root')
doc.appendChild(root)

leaf = doc.createElement('leaf')
text = doc.createTextNode('Text element with attributes')
leaf.appendChild(text)
leaf.setAttribute('color', 'white')
root.appendChild(leaf)

leaf_cdata = doc.createElement('leaf_cdata')
cdata = doc.createCDATASection('<em>CData</em> can contain <strong>HTML tags</strong> without encoding')
leaf_cdata.appendChild(cdata)
root.appendChild(leaf_cdata)

branch = doc.createElement('branch')
branch.appendChild(leaf.cloneNode(True))
root.appendChild(branch)

mixed = doc.createElement('mixed')
mixed_leaf = leaf.cloneNode(True)
mixed_leaf.setAttribute('color', 'black')
mixed_leaf.setAttribute('state', 'modified')
mixed.appendChild(mixed_leaf)
mixed_text = doc.createTextNode('Do not use mixed elements if it possible.')
mixed.appendChild(mixed_text)
root.appendChild(mixed)

xml_str = doc.toprettyxml(indent="  ")
with open("minidom_example.xml", "w") as f:
    f.write(xml_str)

minidom_example.xml:

<?xml version="1.0" ?>
<root>
  <leaf color="white">Text element with attributes</leaf>
  <leaf_cdata>
<![CDATA[<em>CData</em> can contain <strong>HTML tags</strong> without encoding]]>  </leaf_cdata>
  <branch>
    <leaf color="white">Text element with attributes</leaf>
  </branch>
  <mixed>
    <leaf color="black" state="modified">Text element with attributes</leaf>
    Do not use mixed elements if it possible.
  </mixed>
</root>

The standard Web Storage, does not say anything about the restoring any of these. So there won't be any standard way to do it. You have to go through the way the browsers implement these, or find a way to backup these before you delete them.

This can be done with MySQL, although it's highly unintuitive:

CREATE PROCEDURE p25 (OUT return_val INT)
BEGIN
  DECLARE a,b INT;
  DECLARE cur_1 CURSOR FOR SELECT s1 FROM t;
  DECLARE CONTINUE HANDLER FOR NOT FOUND
  SET b = 1;
  OPEN cur_1;
  REPEAT
    FETCH cur_1 INTO a;
    UNTIL b = 1
  END REPEAT;
  CLOSE cur_1;
  SET return_val = a;
END;//

Check out this guide: mysql-storedprocedures.pdf

java.sql.Timestamp extends java.util.Date. You can do:

String s = new SimpleDateFormat("MM/dd/yyyy").format(myTimestamp);

Or to also include time:

String s = new SimpleDateFormat("MM/dd/yyyy HH:mm:ss").format(myTimestamp);

After poking around it looks like Kelsey is correct.

Just use a comma or something and split it when you want to consume it.

1. Go to C:\xampp\php
2. open the file "php.ini-development" on a text editor.
3. Then uncomment ;extension=php_intl.dll by removing the semicolon

Rails4 has some added datatypes for Postgres.

For example, railscast #400 names two of them:

Rails 4 has support for native datatypes in Postgres and we’ll show two of these here, although a lot more are supported: array and hstore. We can store arrays in a string-type column and specify the type for hstore.

Besides, you can also use cidr, inet and macaddr. For more information:

https://blog.engineyard.com/2013/new-in-rails-4

It's really simple to fix the issue, however keep in mind that you should fork and commit your changes for each library you are using in their repositories to help others as well.

Let's say you have something like this in your code:

$str = "test";
echo($str{0});

since PHP 7.4 curly braces method to get individual characters inside a string has been deprecated, so change the above syntax into this:

$str = "test";
echo($str[0]);

Fixing the code in the question will look something like this:

public function getRecordID(string $zoneID, string $type = '', string $name = ''): string
{
    $records = $this->listRecords($zoneID, $type, $name);
    if (isset($records->result[0]->id)) {
        return $records->result[0]->id;
    }
    return false;
}

I had tried many ways from replies in this topic, mostly works but got some side-effect like if I use overflow-x on body,html it might slow/freeze the page when users scroll down on mobile.

use position: fixed on wrapper/div inside the body is good too, but when I have a menu and use Javascript click animated scroll to some section, It's not working.

So, I decided to use touch-action: pan-y pinch-zoom on wrapper/div inside the body. Problem solved.

\rm -f file will never report not found.

As an alternative, if you put a space between the date and time, DateTime.Parse will recognize the format for you. That's about as simple as you can get it. (If ParseExact was still not being recognized)

This is going to be largely dependent on the RDBMS you're using, and whether a .NET option even exists for that RDBMS.

If you're using SQL Server, use the SqlBulkCopy class.

For other database vendors, try googling for them specifically. For example a search for ".NET Bulk insert into Oracle" turned up some interesting results, including this link back to Stack Overflow: Bulk Insert to Oracle using .NET.

It is pretty easy to add a collaborator to a free plan.

1. Navigate to the repository on Github you wish to share with your collaborator.
2. Click on the "Settings" tab on the right side of the menu at the top of the screen.
3. On the new page, click the "Collaborators" menu item on the left side of the page.
4. Start typing the new collaborator's GitHub username into the text box.
5. Select the GitHub user from the list that appears below the text box.
6. Click the "Add" button.

The added user should now be able to push to your repository on GitHub.

The answer is: you can't only through sms, i have tried that approach before.

You could fetch the base station IDs, but this won't help you a lot without the location of the base station itself and this informations are really hard to retrieve from the providers.

I have looked through the 3 apps you have listed in your question:

1. The App uses WiFi and GPRS location service, quite the same approach as Google uses on the phone. phonesavvy maybe has a base station location database or uses a database retrieved e.g. from OpenStreetMap or some similar crowd-based project.
2. The app analyzes just the number for country code and city code. No location there.
3. Dito.

@ResponseBody
@RequestMapping(value="/get-text", produces="text/plain")
public String myMethod() {
     return "Response!";
}

• You see that @ResponseBody ?

It's telling that the method returns some text and not to interpret it as a view etc.

• You see that produces="text/plain" ?

It's just a good practice as it tells what will be returned from the method :)

Sometimes it is useful to scroll the text with the K and J keys, so I have this "scroll mode" function in my .vimrc (also bound to zs).

See scroll_mode.vim.

In Simple word- package.json of your project has not property of repository you must have to add it,

and you have to add repository in your package.json like below

and Let me explain according to your scenario

you must have to add repository field something like below

  "repository" : {     
     "type" : "git",
      "url" : "http://github.com/npm/express.git" 
   }

In my case issue occurred after following:

I selected proxy settings from Android Studio settings when I was working in a network behind a proxy. When I disconnected from that network and connected to home network which doesn't have a proxy, I removed the proxy settings from Android Studio, but gradle seemed to take the old proxy settings.

The problem was that gradle had also saved the proxy settings in following file when I set proxy settings in Android Studio, but it hasn't got removed when I removed proxy settings from Android Studio.

%HOME%\.gradle\gradle.properties

When I removed the proxy settings from this file, gradle sync worked again.

You need convert list to numpy array and then reshape:

df = pd.DataFrame(np.array(my_list).reshape(3,3), columns = list("abc"))
print (df)
   a  b  c
0  1  2  3
1  4  5  6
2  7  8  9

I just had this problem and found in my apache error log that sendmail was'nt installed, after installation it was all working as it should!

root@web1:~$ tail /var/log/apache2/error.log
sh: 1: /usr/sbin/sendmail: not found

In a Spring Boot 2 application you can either exclude the service configuration from autoconfiguration:

spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.security.servlet.UserDetailsServiceAutoConfiguration

or if you just want to hide the message in the logs you can simply change the log level:

logging.level.org.springframework.boot.autoconfigure.security=WARN

Further information can be found here: https://docs.spring.io/spring-boot/docs/2.0.x/reference/html/boot-features-security.html

With

 void DoWork(int n);

n is a copy of the value of the actual parameter, and it is legal to change the value of n within the function. With

void DoWork(const int &n);

n is a reference to the actual parameter, and it is not legal to change its value.

There is a more easy and beautiful way:

$('#MyModal').on('hidden.bs.modal', function () {
    $(this).find('form').trigger('reset');
})

reset is dom build-in funtion, you can also use $(this).find('form')[0].reset();

And Bootstrap's modal class exposes a few events for hooking into modal functionality, detail at here.

hide.bs.modal This event is fired immediately when the hide instance method has been called.

hidden.bs.modal This event is fired when the modal has finished being hidden from the user (will wait for CSS transitions to complete).

Another option:

def map = ['a':1, 'b':2, 'c':3]
map.each{
  println it.key +" "+ it.value
}

In my case, path for JAVA used by MAVEN was not set as JAVA_HOME as configured on the machine. Hence, it was not even trying to download the dependencies. Steps I followed which solved this issue,

1. Checked for JAVA path , Settings >> Build >> Build Tools >> Importing >> JDK for importer. Pointed it to JAVA_HOME.

2. mvn clean install -U

   Used above command to force the dependencies download.

3. Re imported Maven Projects

It's a very difficult problem to validate something like a name due to all the corner cases possible.

Corner Cases

• Anything anything here

Sanitize the inputs and let them enter whatever they want for a name, because deciding what is a valid name and what is not is probably way outside the scope of whatever you're doing; given the range of potential strange - and legal names is nearly infinite.

If they want to call themselves Tricyclopltz^2-Glockenschpiel, that's their problem, not yours.

const escapeString = item => (typeof item === 'string') ? `"${item}"` : String(item)

const arrayToCsv = (arr, seperator = ';') => arr.map(escapeString).join(seperator)

const rowKeysToCsv = (row, seperator = ';') => arrayToCsv(Object.keys(row))

const rowToCsv = (row, seperator = ';') => arrayToCsv(Object.values(row))

const rowsToCsv = (arr, seperator = ';') => arr.map(row => rowToCsv(row, seperator)).join('\n')

const collectionToCsvWithHeading = (arr, seperator = ';') => `${rowKeysToCsv(arr[0], seperator)}\n${rowsToCsv(arr, seperator)}`


// Usage: 

collectionToCsvWithHeading([
  { title: 't', number: 2 },
  { title: 't', number: 1 }
])

// Outputs: 
"title";"number"
"t";2
"t";1

I know this is a really old question but i think i have a solution In the newer versions of openCV fonts are repesented by a number like this

    FONT_HERSHEY_SIMPLEX = 0,
    FONT_HERSHEY_PLAIN = 1,
    FONT_HERSHEY_DUPLEX = 2,
    FONT_HERSHEY_COMPLEX = 3,
    FONT_HERSHEY_TRIPLEX = 4,
    FONT_HERSHEY_COMPLEX_SMALL = 5,
    FONT_HERSHEY_SCRIPT_SIMPLEX = 6,
    FONT_HERSHEY_SCRIPT_COMPLEX = 7,
    FONT_ITALIC = 16

so all you have to do is replace the font name with the corresponding number

cv2.putText(image,"Hello World!!!", (x,y), 0, 2, 255)

again i know its an old question but it may help someone in the future

help.search() is a handy function, e.g.

> help.search("concatenate")

will lead you to paste().

My preference is to keep the formatting details with the view and not the viewmodel. So in MVC4/Razor:

@Html.TextBoxFor(model => model.DateTime, "{0:d}");

datetime format reference: http://msdn.microsoft.com/en-us/library/az4se3k1(v=vs.71).aspx

Then I have a JQuery datepicker bound to it, and that put's the date in as a different format...doh!

Looks like I need to set the datepicker's format to the same formatting.

So I'm storing the System.Globalization formatting in a data-* attribute and collecting it when setting up the

@Html.TextBoxFor(
    model => model.DateTime.Date, 
    "{0:d}", 
    new 
    { 
        @class = "datePicker", 
        @data_date_format=System.Globalization.CultureInfo
                          .CurrentUICulture.DateTimeFormat.ShortDatePattern 
    }));

And here's the sucky part: the formats of .net and datepicker do not match, so hackery is needed:

$('.datePicker').each(function(){
    $(this).datepicker({
        dateFormat:$(this).data("dateFormat").toLowerCase().replace("yyyy","yy")
    });
});

that's kind of weak, but should cover a lot of cases.

For ease of use, ctypes is the way to go.

The following example of ctypes is from actual code I've written (in Python 2.5). This has been, by far, the easiest way I've found for doing what you ask.

import ctypes

# Load DLL into memory.

hllDll = ctypes.WinDLL ("c:\\PComm\\ehlapi32.dll")

# Set up prototype and parameters for the desired function call.
# HLLAPI

hllApiProto = ctypes.WINFUNCTYPE (
    ctypes.c_int,      # Return type.
    ctypes.c_void_p,   # Parameters 1 ...
    ctypes.c_void_p,
    ctypes.c_void_p,
    ctypes.c_void_p)   # ... thru 4.
hllApiParams = (1, "p1", 0), (1, "p2", 0), (1, "p3",0), (1, "p4",0),

# Actually map the call ("HLLAPI(...)") to a Python name.

hllApi = hllApiProto (("HLLAPI", hllDll), hllApiParams)

# This is how you can actually call the DLL function.
# Set up the variables and call the Python name with them.

p1 = ctypes.c_int (1)
p2 = ctypes.c_char_p (sessionVar)
p3 = ctypes.c_int (1)
p4 = ctypes.c_int (0)
hllApi (ctypes.byref (p1), p2, ctypes.byref (p3), ctypes.byref (p4))

The ctypes stuff has all the C-type data types (int, char, short, void*, and so on) and can pass by value or reference. It can also return specific data types although my example doesn't do that (the HLL API returns values by modifying a variable passed by reference).

In terms of the specific example shown above, IBM's EHLLAPI is a fairly consistent interface.

All calls pass four void pointers (EHLLAPI sends the return code back through the fourth parameter, a pointer to an int so, while I specify int as the return type, I can safely ignore it) as per IBM's documentation here. In other words, the C variant of the function would be:

int hllApi (void *p1, void *p2, void *p3, void *p4)

This makes for a single, simple ctypes function able to do anything the EHLLAPI library provides, but it's likely that other libraries will need a separate ctypes function set up per library function.

The return value from WINFUNCTYPE is a function prototype but you still have to set up more parameter information (over and above the types). Each tuple in hllApiParams has a parameter "direction" (1 = input, 2 = output and so on), a parameter name and a default value - see the ctypes doco for details

Once you have the prototype and parameter information, you can create a Python "callable" hllApi with which to call the function. You simply create the needed variable (p1 through p4 in my case) and call the function with them.

You can easily do this using node-fetch if you are pulling from http(s) URIs.

From the readme:

fetch('https://assets-cdn.github.com/images/modules/logos_page/Octocat.png')
    .then(res => res.buffer())
    .then(buffer => console.log)

Just another bit. in some case i found no result on all_tab_privs! i found it indeed on dba_tab_privs. I think so that this last table is better to check for any grant available on an object (in case of impact analysis). The statement becomes:

    select * from dba_tab_privs where table_name = 'sequence_name';

Yes you are right. There is no built in mechanism for automatically updation of Android Studio. You have to manually download it and configure it.

My solution

ALTER TABLE `table_name` MODIFY COLUMN `column_name` TIMESTAMP NOT
NULL DEFAULT CURRENT_TIMESTAMP;

MotionEvent is generated only by touching the screen.

It is most likely due to a cross-origin request, but it may not be. For me, I had been debugging an API and had set the Access-Control-Allow-Origin to *, but it appears that recent versions of Chrome are requiring an extra header. Try prepending the following to your file if you are using PHP:

header("Access-Control-Allow-Origin: *");
header("Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept");

Make sure that you haven't already used header in another file, or you will get a nasty error. See the docs for more.

You can use:

var mySKUs = myLines.Select(l => l.Sku).ToList();

The Select method, in this case, performs a mapping from IEnumerable<Line> to IEnumerable<string> (the SKU), then ToList() converts it to a List<string>.

Note that this requires using System.Linq; to be at the top of your .cs file.

the solution from millhouse is not working anymore with recent version of mockito

This solution work with java 8 and mockito 2.2.9

where ArgumentMatcher is an instanceof org.mockito.ArgumentMatcher

public class ClassOrSubclassMatcher<T> implements ArgumentMatcher<Class<T>> {

   private final Class<T> targetClass;

    public ClassOrSubclassMatcher(Class<T> targetClass) {
        this.targetClass = targetClass;
    }

    @Override
    public boolean matches(Class<T> obj) {
        if (obj != null) {
            if (obj instanceof Class) {
                return targetClass.isAssignableFrom( obj);
            }
        }
        return false;
    }
}

And the use

when(a.method(ArgumentMatchers.argThat(new ClassOrSubclassMatcher<>(A.class)))).thenReturn(b);

I had to select "Use classpath of module:" drop down option and choose my module.

Followed this.

I have solved it with adding some key in info.plist. The steps I followed are:

1. Opened my Projects info.plist file

2. Added a Key called NSAppTransportSecurity as a Dictionary.

3. Added a Subkey called NSAllowsArbitraryLoads as Boolean and set its value to YES as like following image.

Clean the Project and Now Everything is Running fine as like before.

Ref Link.

In my case I faced this issue in my simulator because my computer's date was behind of current date. So do check this case too when you face SSL error.

A functor is pretty much just a class which defines the operator(). That lets you create objects which "look like" a function:

// this is a functor
struct add_x {
  add_x(int val) : x(val) {}  // Constructor
  int operator()(int y) const { return x + y; }

private:
  int x;
};

// Now you can use it like this:
add_x add42(42); // create an instance of the functor class
int i = add42(8); // and "call" it
assert(i == 50); // and it added 42 to its argument

std::vector<int> in; // assume this contains a bunch of values)
std::vector<int> out(in.size());
// Pass a functor to std::transform, which calls the functor on every element 
// in the input sequence, and stores the result to the output sequence
std::transform(in.begin(), in.end(), out.begin(), add_x(1)); 
assert(out[i] == in[i] + 1); // for all i

There are a couple of nice things about functors. One is that unlike regular functions, they can contain state. The above example creates a function which adds 42 to whatever you give it. But that value 42 is not hardcoded, it was specified as a constructor argument when we created our functor instance. I could create another adder, which added 27, just by calling the constructor with a different value. This makes them nicely customizable.

As the last lines show, you often pass functors as arguments to other functions such as std::transform or the other standard library algorithms. You could do the same with a regular function pointer except, as I said above, functors can be "customized" because they contain state, making them more flexible (If I wanted to use a function pointer, I'd have to write a function which added exactly 1 to its argument. The functor is general, and adds whatever you initialized it with), and they are also potentially more efficient. In the above example, the compiler knows exactly which function std::transform should call. It should call add_x::operator(). That means it can inline that function call. And that makes it just as efficient as if I had manually called the function on each value of the vector.

If I had passed a function pointer instead, the compiler couldn't immediately see which function it points to, so unless it performs some fairly complex global optimizations, it'd have to dereference the pointer at runtime, and then make the call.

From See Java Static Variable Methods:

• It is a variable which belongs to the class and not to object(instance)
• Static variables are initialized only once , at the start of the execution. These variables will be initialized first, before the initialization of any instance variables
• A single copy to be shared by all instances of the class
• A static variable can be accessed directly by the class name and doesn’t need any object.

Instance and class (static) variables are automatically initialized to standard default values if you fail to purposely initialize them. Although local variables are not automatically initialized, you cannot compile a program that fails to either initialize a local variable or assign a value to that local variable before it is used.

What the compiler actually does is to internally produce a single class initialization routine that combines all the static variable initializers and all of the static initializer blocks of code, in the order that they appear in the class declaration. This single initialization procedure is run automatically, one time only, when the class is first loaded.

In case of inner classes, they can not have static fields

An inner class is a nested class that is not explicitly or implicitly declared static.

...

Inner classes may not declare static initializers (§8.7) or member interfaces...

Inner classes may not declare static members, unless they are constant variables...

See JLS 8.1.3 Inner Classes and Enclosing Instances

final fields in Java can be initialized separately from their declaration place this is however can not be applicable to static final fields. See the example below.

final class Demo
{
    private final int x;
    private static final int z;  //must be initialized here.

    static 
    {
        z = 10;  //It can be initialized here.
    }

    public Demo(int x)
    {
        this.x=x;  //This is possible.
        //z=15; compiler-error - can not assign a value to a final variable z
    }
}

This is because there is just one copy of the static variables associated with the type, rather than one associated with each instance of the type as with instance variables and if we try to initialize z of type static final within the constructor, it will attempt to reinitialize the static final type field z because the constructor is run on each instantiation of the class that must not occur to static final fields.

First you need to start karma server with

karma start

Then, you can use grep to filter a specific test or describe block:

karma run -- --grep=testDescriptionFilter

Use:

git reset --mixed

instead of git reset --hard. You will not lose any changes.

You can check this like below :

if varDate = "#01/01/0001#" then
       '  blank date. do something.
else
       ' Date is not blank. Do some other thing
end if

I was having the same error, but in my case the view was called seeProposal.

I changed it to seeproposal and it worked fine...

It was not being an issue while testing locally, but apparently Laravel makes a distinction with capital letters running in production. So for those who have views with capital letters, I would change all of them to lowercase.

Yes, but not how you would imagine. According to caniuse (a very good resource) there is no support and no polyfill available for adding text-shadow support to IE9. However, IE has their own proprietary text shadow (detailed here).

Example implementation, taken from their website (works in IE5.5 through IE9):

p.shadow { 
    filter: progid:DXImageTransform.Microsoft.Shadow(color=#0000FF,direction=45);
}

For cross-browser compatibility and future-proofing of code, remember to also use the CSS3 standard text-shadow property (detailed here). This is especially important considering that IE10 has officially announced their intent to drop support for legacy dx filters. Going forward, IE10+ will only support the CSS3 standard text-shadow.

Daniel LeCheminant's code didn't work for me after converting it from CoffeeScript to JavaScript (js2coffee). It kept bombing out on the _.defer() line.

I assumed this was something to do with jQuery deferreds, so I changed it to $.Deferred() and it's working now. I tested it in Internet Explorer 11, Firefox 35, and Chrome 39 with jQuery 2.1.1. The usage is the same as described in Daniel's post.

var TrelloClipboard;

TrelloClipboard = new ((function () {
    function _Class() {
        this.value = "";
        $(document).keydown((function (_this) {
            return function (e) {
                var _ref, _ref1;
                if (!_this.value || !(e.ctrlKey || e.metaKey)) {
                    return;
                }
                if ($(e.target).is("input:visible,textarea:visible")) {
                    return;
                }
                if (typeof window.getSelection === "function" ? (_ref = window.getSelection()) != null ? _ref.toString() : void 0 : void 0) {
                    return;
                }
                if ((_ref1 = document.selection) != null ? _ref1.createRange().text : void 0) {
                    return;
                }
                return $.Deferred(function () {
                    var $clipboardContainer;
                    $clipboardContainer = $("#clipboard-container");
                    $clipboardContainer.empty().show();
                    return $("<textarea id='clipboard'></textarea>").val(_this.value).appendTo($clipboardContainer).focus().select();
                });
            };
        })(this));

        $(document).keyup(function (e) {
            if ($(e.target).is("#clipboard")) {
                return $("#clipboard-container").empty().hide();
            }
        });
    }

    _Class.prototype.set = function (value) {
        this.value = value;
    };

    return _Class;

})());

I'm taking a cue from the comments in @Dhara's answer, it sounds like you want to set a list of new_tick_locations by a function from the old x-axis to the new x-axis. The tick_function below takes in a numpy array of points, maps them to a new value and formats them:

import numpy as np
import matplotlib.pyplot as plt

fig = plt.figure()
ax1 = fig.add_subplot(111)
ax2 = ax1.twiny()

X = np.linspace(0,1,1000)
Y = np.cos(X*20)

ax1.plot(X,Y)
ax1.set_xlabel(r"Original x-axis: $X$")

new_tick_locations = np.array([.2, .5, .9])

def tick_function(X):
    V = 1/(1+X)
    return ["%.3f" % z for z in V]

ax2.set_xlim(ax1.get_xlim())
ax2.set_xticks(new_tick_locations)
ax2.set_xticklabels(tick_function(new_tick_locations))
ax2.set_xlabel(r"Modified x-axis: $1/(1+X)$")
plt.show()

I've had the same issue every now and then. This is how i solve the issue, it works like a charm for me!

1. Go to 'Task Manager'
2. Choose 'Processes' tab
3. Click on 'Java(TM) Platform SE Binary'
4. Click on 'End Process' button
5. Go to your NetBeans project
6. Clean & Build the project