In mi and vivo - Using the above solution is not enough. You must also tell the user to add permission manually. You can help them by opening the right location inside phone settings. Varies for different phone models.

You just need to wrap items with linear layouts which have layout_weight. To have items horizontally separated, use this

<LinearLayout
    ...
    ...
  <LinearLayout
      android:layout_width="0dp"
      android:layout_height="wrap_content"
      android:layout_weight="1"
      android:gravity="center">

      // your item

  </LinearLayout>
</LinearLayout>

step-1. here I'm deploying pos.war First go to tomcat webapps folder and paste it

step-2. go to tomcat->bin folder start tomcat by clicking startup.bat

step-3. go to browser write localhost:port/project name eg. localhost:8080/pos (here my tomcat run on port 8080)

Done....

I find this solution to run a URL every 5 minutes from cPanel you can execute any task by this command.

*/5 * * * * This on run At every 5th minute. so it only runs once in one hour

Here is an example that i use to run my URL every second

*/5 * * * * curl http://www.example.com/;
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 
sleep 5m; curl http://www.example.com/; 

To sleep for 5 seconds, use:

sleep 5

Want to sleep for 5 minutes, use:

sleep 5m

Halt or sleep for 5 hours, use:

sleep 5h

If you do not want any email of cron job just add this to end of the command

 >/dev/null 2>&1

::marker

You can use the ::marker CSS pseudo-element to select the marker box of a list item (i.e. bullets or numbers).

ul li::marker {
  color: red;
}

Note: At the time of posting this answer, this is considered experimental technology and has only been implemented in Firefox and Safari (so far).

PostgreSQL 12 supports generated columns:

PostgreSQL 12 Beta 1 Released!

Generated Columns

PostgreSQL 12 allows the creation of generated columns that compute their values with an expression using the contents of other columns. This feature provides stored generated columns, which are computed on inserts and updates and are saved on disk. Virtual generated columns, which are computed only when a column is read as part of a query, are not implemented yet.

Generated Columns

A generated column is a special column that is always computed from other columns. Thus, it is for columns what a view is for tables.

CREATE TABLE people (
    ...,
    height_cm numeric,
    height_in numeric GENERATED ALWAYS AS (height_cm * 2.54) STORED
);

db<>fiddle demo

Your guess is right: the code is trying to evaluate x**3+2*x-4 immediately. Unfortunately you can't really prevent it from doing so. The good news is that in Python, functions are first-class objects, by which I mean that you can treat them like any other variable. So to fix your function, we could do:

import numpy as np  
import matplotlib.pyplot as plt  

def graph(formula, x_range):  
    x = np.array(x_range)  
    y = formula(x)  # <- note now we're calling the function 'formula' with x
    plt.plot(x, y)  
    plt.show()  

def my_formula(x):
    return x**3+2*x-4

graph(my_formula, range(-10, 11))

If you wanted to do it all in one line, you could use what's called a lambda function, which is just a short function without a name where you don't use def or return:

graph(lambda x: x**3+2*x-4, range(-10, 11))

And instead of range, you can look at np.arange (which allows for non-integer increments), and np.linspace, which allows you to specify the start, stop, and the number of points to use.

I tried this to fix access issues to an IIS website, which manifested as something like the following in the Event Logs ? Windows ? Application:

Log Name:      Application
Source:        ASP.NET 4.0.30319.0
Date:          1/5/2012 4:12:33 PM
Event ID:      1314
Task Category: Web Event
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      SALTIIS01

Description:
Event code: 4008 
Event message: File authorization failed for the request. 
Event time: 1/5/2012 4:12:33 PM 
Event time (UTC): 1/6/2012 12:12:33 AM 
Event ID: 349fcb2ec3c24b16a862f6eb9b23dd6c 
Event sequence: 7 
Event occurrence: 3 
Event detail code: 0 

Application information: 
    Application domain: /LM/W3SVC/2/ROOT/Application/SNCDW-19-129702818025409890 
    Trust level: Full 
    Application Virtual Path: /Application/SNCDW 
    Application Path: D:\Sites\WCF\Application\SNCDW\ 
    Machine name: SALTIIS01 

Process information: 
    Process ID: 1896 
    Process name: w3wp.exe 
    Account name: iisservice 

Request information: 
    Request URL: http://webservicestest/Application/SNCDW/PC.svc 
    Request path: /Application/SNCDW/PC.svc 
    User host address: 10.60.16.79 
    User: js3228 
    Is authenticated: True 
    Authentication Type: Negotiate 
    Thread account name: iisservice 

In the end I had to give the Windows Everyone group read access to that folder to get it to work properly.

It sounds like you need to use recursion. Make a function to iterate through a list, and if it hits an item that is also a list, call itself to iterate on the member. Here's a link to something similar:

http://www.saltycrane.com/blog/2008/08/python-recursion-example-navigate-tree-data/

1) Put =Left(E1,5) in F1

2) Copy F1, then select entire F column and paste.

Even though this is an old question, I would like to add a new thought to the discussion. I have extended the Arrange, Act, Assert pattern to be Expected, Arrange, Act, Assert. You can make an expected exception pointer, then assert it was assigned to. This feels cleaner than doing your Asserts in a catch block, leaving your Act section mostly just for the one line of code to call the method under test. You also don't have to Assert.Fail(); or return from multiple points in the code. Any other exception thrown will cause the test to fail, because it won't be caught, and if an exception of your expected type is thrown, but the it wasn't the one you were expecting, Asserting against the message or other properties of the exception help make sure your test won't pass inadvertently.

[TestMethod]
public void Bar_InvalidDependency_ThrowsInvalidOperationException()
{
    // Expectations
    InvalidOperationException expectedException = null;
    string expectedExceptionMessage = "Bar did something invalid.";

    // Arrange
    IDependency dependency = DependencyMocks.Create();
    Foo foo = new Foo(dependency);

    // Act
    try
    {
        foo.Bar();
    }
    catch (InvalidOperationException ex)
    {
        expectedException = ex;
    }

    // Assert
    Assert.IsNotNull(expectedException);
    Assert.AreEqual(expectedExceptionMessage, expectedException.Message);
}

TLDR; Visual Studio 2019 may simply need a restart.

I encountered this situation using projects based on Microsoft.NET.Sdk project.

<Project Sdk="Microsoft.NET.Sdk">

Specifically:

• Project1: targets .netstandard2.1
  • references Microsoft.Extensions.Logging.Console via Nuget
• Project2: targets .netstandard2.1
  • references Project1 via a Project reference
• Project2Tests: targets .netcoreapp3.1
  • references Project2 via a Project reference

At test execution, I received the error messaging indicating that Microsoft.Extensions.Logging.Console could not be found, and it was indeed not in the output directory.

I decided to work around the issue by adding Microsoft.Extensions.Logging.Console to Project2, only to discover that Visual Studio's Nuget Manager did not list Microsoft.Extensions.Logging.Console as installed in Project1, despite it's presence in the Project1.csproj file.

A simple shut down and restart of Visual Studio resolved the problem without the need to add an extra reference. Perhaps this will save someone 45 minutes of lost productivity :-)

You can always make it a function

function writeObject(color){
    $('body').append('<div style="color:'+color+';">Hello!</div>')
}

writeObject('blue') ?

I was having the same issue. So I went to the Java options through Control Panel. Copied the web address that I was having an issue with to the exceptions and it was fixed.

#Single line

'''
multi-line
comment
'''

"""
also, 
multi-line comment
"""

String word = "bannanas";

String guess = "n";

String temp = word;

while(temp.indexOf(guess) != -1) {
     int index = temp.indexOf(guess);
     System.out.println(index);
     temp = temp.substring(index + 1);
}

Use YouTube Android Player API.

activity_main.xml:

 <?xml version="1.0" encoding="utf-8"?>
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:tools="http://schemas.android.com/tools"
android:id="@+id/activity_main"
android:layout_width="match_parent"
android:layout_height="match_parent"

tools:context="com.example.andreaskonstantakos.vfy.MainActivity">

<com.google.android.youtube.player.YouTubePlayerView
    android:layout_width="match_parent"
    android:layout_height="wrap_content"
    android:visibility="visible"
    android:layout_centerHorizontal="true"
    android:id="@+id/youtube_player"
    android:layout_alignParentTop="true" />

<Button
android:text="Button"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_alignParentBottom="true"
android:layout_centerHorizontal="true"
android:layout_marginBottom="195dp"
android:visibility="visible"
android:id="@+id/button" />


</RelativeLayout>

MainActivity.java:

package com.example.andreaskonstantakos.vfy;


import android.os.Bundle;
import android.view.View;
import android.widget.Button;
import com.google.android.youtube.player.YouTubeBaseActivity;
import com.google.android.youtube.player.YouTubeInitializationResult;
import com.google.android.youtube.player.YouTubePlayer;
import com.google.android.youtube.player.YouTubePlayerView;



public class MainActivity extends YouTubeBaseActivity {

YouTubePlayerView youTubePlayerView;
Button button;
YouTubePlayer.OnInitializedListener onInitializedListener;

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);

     youTubePlayerView = (YouTubePlayerView) findViewById(R.id.youtube_player);
     button = (Button) findViewById(R.id.button);


     onInitializedListener = new YouTubePlayer.OnInitializedListener(){

         @Override
         public void onInitializationSuccess(YouTubePlayer.Provider provider, YouTubePlayer youTubePlayer, boolean b) {

            youTubePlayer.loadVideo("Hce74cEAAaE");

             youTubePlayer.play();
     }

         @Override
         public void onInitializationFailure(YouTubePlayer.Provider provider, YouTubeInitializationResult youTubeInitializationResult) {

         }
     };

    button.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View v) {

youTubePlayerView.initialize(PlayerConfig.API_KEY,onInitializedListener);
        }
    });
}
}

and the PlayerConfig.java class:

    package com.example.andreaskonstantakos.vfy;

/**
 * Created by Andreas Konstantakos on 13/4/2017.
 */

public class PlayerConfig {

PlayerConfig(){}

public static final String API_KEY = 
"xxxxx";
}

Replace the "Hce74cEAAaE" with your video ID from https://www.youtube.com/watch?v=Hce74cEAAaE. Get your API_KEY from Console.developers.google.com and also replace it on the PlayerConfig.API_KEY. For any further information you can follow the following tutorial step by step: https://www.youtube.com/watch?v=3LiubyYpEUk

After doing the steps which were mentioned by @Ravindra Bagale, Try this step. Server name: localhost\{Instance name you were gave}

This was apparently always possible in .net core 1.0 with Microsoft.AspNetCore.Http.Extensions, which adds extension to HttpRequest to get full URL; GetEncodedUrl.

e.g. from razor view:

@using Microsoft.AspNetCore.Http.Extensions
...
<a href="@Context.Request.GetEncodedUrl()">Link to myself</a>

Since 2.0, also have relative path and query GetEncodedPathAndQuery.

This error happened to me, generally it'll be a problem due to not including the mysql-connector.jar in your eclipse project (or your IDE).

In my case, it was because of a problem on the OS.

I was editing a table in phpmyadmin, and mysql hung, I restarted Ubuntu. I cleaned the project without being successful. This morning, when I've tried the web server, it work perfectly the first time.

At the first reboot, the OS recognized that there was a problem, and after the second one, it was fixed. I hope this will save some time to somebody that "could" have this problem!

I think what you want is mapply. You could apply the function to all columns, and then just drop the columns you don't want. However, if you are applying different functions to different columns, it seems likely what you want is mutate, from the dplyr package.

I used Robert Lee`s answer and it works great! Just writing down the complete function i'm using:

function isMobileDevice(){
    $aMobileUA = array(
        '/iphone/i' => 'iPhone', 
        '/ipod/i' => 'iPod', 
        '/ipad/i' => 'iPad', 
        '/android/i' => 'Android', 
        '/blackberry/i' => 'BlackBerry', 
        '/webos/i' => 'Mobile'
    );

    //Return true if Mobile User Agent is detected
    foreach($aMobileUA as $sMobileKey => $sMobileOS){
        if(preg_match($sMobileKey, $_SERVER['HTTP_USER_AGENT'])){
            return true;
        }
    }
    //Otherwise return false..  
    return false;
}

The argument is of length zero takes places when you get an output as an integer of length 0 and not a NULL output.i.e., integer(0).

You can further verify my point by finding the class of your output- >class(output) "integer"

Nouns.h doesn't include <string>, but it needs to. You need to add

#include <string>

at the top of that file, otherwise the compiler doesn't know what std::string is when it is encountered for the first time.

Perhaps the easiest is to use position: absolute to fix to the bottom, then a suitable margin/padding to make sure that the other text doesn't spill over the top of it.

css:

<style>
  body {
    margin: 0 0 20px;
  }
  .footer {
    position: absolute;
    bottom: 0;
    height: 20px;
    background: #f0f0f0;
    width: 100%;
  }
</style>

Here is the html main content.

<div class="footer"> Here is the footer. </div>

As a newbie in React world, I came across a similar issues where I could not edit the textarea and struggled with binding. It's worth knowing about controlled and uncontrolled elements when it comes to react.

The value of the following uncontrolled textarea cannot be changed because of value

 <textarea type="text" value="some value"
    onChange={(event) => this.handleOnChange(event)}></textarea>

The value of the following uncontrolled textarea can be changed because of use of defaultValue or no value attribute

<textarea type="text" defaultValue="sample" 
    onChange={(event) => this.handleOnChange(event)}></textarea>

<textarea type="text" 
   onChange={(event) => this.handleOnChange(event)}></textarea>

The value of the following controlled textarea can be changed because of how value is mapped to a state as well as the onChange event listener

<textarea value={this.state.textareaValue} 
onChange={(event) => this.handleOnChange(event)}></textarea>

Here is my solution using different syntax. I prefer the auto-bind than manual binding however, if I were to not use {(event) => this.onXXXX(event)} then that would cause the content of textarea to be not editable OR the event.preventDefault() does not work as expected. Still a lot to learn I suppose.

class Editor extends React.Component {
  constructor(props) {
    super(props)
    this.state = {
      textareaValue: ''
    }
  }
  handleOnChange(event) {
    this.setState({
      textareaValue: event.target.value
    })
  }
  handleOnSubmit(event) {
    event.preventDefault();
    this.setState({
      textareaValue: this.state.textareaValue + ' [Saved on ' + (new Date()).toLocaleString() + ']'
    })
  }
  render() {
    return <div>
        <form onSubmit={(event) => this.handleOnSubmit(event)}>
          <textarea rows={10} cols={30} value={this.state.textareaValue} 
            onChange={(event) => this.handleOnChange(event)}></textarea>
          <br/>
          <input type="submit" value="Save"/>
        </form>
      </div>
  }
}
ReactDOM.render(<Editor />, document.getElementById("content"));

The versions of libraries are

"babel-cli": "6.24.1",
"babel-preset-react": "6.24.1"
"React & ReactDOM v15.5.4" 

One more option which I did not notice in the answers is using std::reduce which is introduced in c++17.

But you may notice many compilers not supporting it (Above GCC 10 may be good). But eventually the support will come.

With std::reduce, the advantage comes when using the execution policies. Specifying execution policy is optional. When the execution policy specified is std::execution::par, the algorithm may use hardware parallel processing capabilities. The gain may be more clear when using big size vectors.

Example:

//SAMPLE
std::vector<int> vec = {2,4,6,8,10,12,14,16,18};
    
//WITHOUT EXECUTION POLICY
int sum = std::reduce(vec.begin(),vec.end());
    
//TAKING THE ADVANTAGE OF EXECUTION POLICIES
int sum2 = std::reduce(std::execution::par,vec.begin(),vec.end());
    
std::cout << "Without execution policy  " << sum << std::endl;
std::cout << "With execution policy  " << sum2 << std::endl;

You need <numeric> header for std::reduce. And '<execution>' for execution policies.

If you really have:

var s = ['{"Select":"11", "PhotoCount":"12"}','{"Select":"21", "PhotoCount":"22"}'];

then simply:

var objs = $.map(s, $.parseJSON);

Here's a demo.

This works for me - i am using jackson 2.0.4

ObjectMapper objectMapper = new ObjectMapper();
final DateFormat df = new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss");
objectMapper.setDateFormat(df);

...
    xmlns:msxsl="urn:schemas-microsoft-com:xslt"
    xmlns:local="urn:local" extension-element-prefixes="msxsl">

    <msxsl:script language="CSharp" implements-prefix="local">
        public string dateTimeNow()
        {       
          return DateTime.Now.ToString("yyyy-MM-ddTHH:mm:ssZ"); 
        } 
    </msxsl:script>  
...
    <xsl:value-of select="local:dateTimeNow()"/>

Well... sometimes it may be uncomfortable to use Contains, StartsWith or EndsWith especially when searching value determine LIKE statment e.g. passed 'value%' require from developer to use StartsWith function in expression. So I decided to write extension for IQueryable objects.

Usage

// numbers: 11-000-00, 00-111-00, 00-000-11

var data1 = parts.Like(p => p.Number, "%11%");
// result: 11-000-00, 00-111-00, 00-000-11

var data2 = parts.Like(p => p.Number, "11%");
// result: 11-000-00

var data3 = parts.Like(p => p.Number, "%11");
// result: 00-000-11

Code

public static class LinqEx
{
    private static readonly MethodInfo ContainsMethod = typeof(string).GetMethod("Contains");
    private static readonly MethodInfo StartsWithMethod = typeof(string).GetMethod("StartsWith", new[] { typeof(string) });
    private static readonly MethodInfo EndsWithMethod = typeof(string).GetMethod("EndsWith", new[] { typeof(string) });

    public static Expression<Func<TSource, bool>> LikeExpression<TSource, TMember>(Expression<Func<TSource, TMember>> property, string value)
    {
        var param = Expression.Parameter(typeof(TSource), "t");
        var propertyInfo = GetPropertyInfo(property);
        var member = Expression.Property(param, propertyInfo.Name);

        var startWith = value.StartsWith("%");
        var endsWith = value.EndsWith("%");

        if (startWith)
            value = value.Remove(0, 1);

        if (endsWith)
            value = value.Remove(value.Length - 1, 1);

        var constant = Expression.Constant(value);
        Expression exp;

        if (endsWith && startWith)
        {
            exp = Expression.Call(member, ContainsMethod, constant);
        }
        else if (startWith) 
        {
            exp = Expression.Call(member, EndsWithMethod, constant);
        }
        else if (endsWith)
        {
            exp = Expression.Call(member, StartsWithMethod, constant);
        }
        else
        {
            exp = Expression.Equal(member, constant);
        }

        return Expression.Lambda<Func<TSource, bool>>(exp, param);
    }

    public static IQueryable<TSource> Like<TSource, TMember>(this IQueryable<TSource> source, Expression<Func<TSource, TMember>> parameter, string value)
    {
        return source.Where(LikeExpression(parameter, value));
    }

    private static PropertyInfo GetPropertyInfo(Expression expression)
    {
        var lambda = expression as LambdaExpression;
        if (lambda == null)
            throw new ArgumentNullException("expression");

        MemberExpression memberExpr = null;

        switch (lambda.Body.NodeType)
        {
            case ExpressionType.Convert:
                memberExpr = ((UnaryExpression)lambda.Body).Operand as MemberExpression;
                break;
            case ExpressionType.MemberAccess:
                memberExpr = lambda.Body as MemberExpression;
                break;
        }

        if (memberExpr == null)
            throw new InvalidOperationException("Specified expression is invalid. Unable to determine property info from expression.");


        var output = memberExpr.Member as PropertyInfo;

        if (output == null)
            throw new InvalidOperationException("Specified expression is invalid. Unable to determine property info from expression.");

        return output;
    }
}

I believe the best way to do this is to use the LocalTimezone class defined in the datetime.tzinfo documentation (goto http://docs.python.org/library/datetime.html#tzinfo-objects and scroll down to the "Example tzinfo classes" section):

Assuming Local is an instance of LocalTimezone

t = datetime.datetime(2009, 7, 10, 18, 44, 59, 193982, tzinfo=utc)
local_t = t.astimezone(Local)

then str(local_t) gives:

'2009-07-11 04:44:59.193982+10:00'

which is what you want.

(Note: this may look weird to you because I'm in New South Wales, Australia which is 10 or 11 hours ahead of UTC)

Symptom:

Could not upload images to WordPress Media Library.

Cause:

(CentOS) yum update

Error:

2014/10/22 18:08:50 [crit] 23286#0: *5332 open() "/var/lib/nginx/tmp/client_body/0000000003" failed (13: Permission denied), client: 1.2.3.4, server: _, request: "POST /wp-admin/media-new.php HTTP/1.1", host: "example.com", referrer: "http://example/wp-admin/media-new.php"

Solution:

chown -R www-data:www-data /var/lib/nginx

execl("/home/vlc", 
  "/home/vlc", "/home/my movies/the movie i want to see.mkv", 
  (char*) NULL);

You need to specify all arguments, included argv[0] which isn't taken from the executable.

Also make sure the final NULL gets cast to char*.

Details are here: http://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html

You can't define static methods in an interface because static methods belongs to a class not to an instance of class, and interfaces are not Classes. Read more here.

However, If you want you can do this:

public class A {
  public static void methodX() {
  }
}

public class B extends A {
  public static void methodX() {
  }
}

In this case what you have is two classes with 2 distinct static methods called methodX().

This is SUPER late and probably not relevant anymore, but if anyone stumbles upon this answer, I believe I know the cause.

So the JSON encoded string is perfectly valid with the degree symbol in it, as the other answer mentions. The problem is most likely in the character encoding that you are reading/writing with. Depending on how you are using Gson, you are probably passing it a java.io.Reader instance. Any time you are creating a Reader from an InputStream, you need to specify the character encoding, or java.nio.charset.Charset instance (it's usually best to use java.nio.charset.StandardCharsets.UTF_8). If you don't specify a Charset, Java will use your platform default encoding, which on Windows is usually CP-1252.

A few comments:

import sun.misc.*; Don't do this. It is non-standard and not guaranteed to be the same between implementations. There are other libraries with Base64 conversion available.

byte[] encVal = c.doFinal(Data.getBytes()); You are relying on the default character encoding here. Always specify what character encoding you are using: byte[] encVal = c.doFinal(Data.getBytes("UTF-8")); Defaults might be different in different places.

As @thegrinner pointed out, you need to explicitly check the length of your byte arrays. If there is a discrepancy, then compare them byte by byte to see where the difference is creeping in.

Case 1 : Yes, this works fine.

Case 2 : This will fail with the error ORA-01441 : cannot decrease column length because some value is too big.

Share and enjoy.

code:

a="http://www.example.com"
try:    
    print urllib.urlopen(a)
except:
    print a+"  site does not exist"

In Swift :- var str_url = yourUrl.absoluteString

It will result a url in string.

Like Unix shells, PowerShell supports > redirects with most of the variations known from Unix, including 2>&1 (though weirdly, order doesn't matter - 2>&1 > file works just like the normal > file 2>&1).

Like most modern Unix shells, PowerShell also has a shortcut for redirecting both standard error and standard output to the same device, though unlike other redirection shortcuts that follow pretty much the Unix convention, the capture all shortcut uses a new sigil and is written like so: *>.

So your implementation might be:

& myjob.bat *>> $logfile

Pass a JS Date object and an integer of how many months you want to add/subtract. monthsToAdd can be positive or negative. Returns a JS date object.

If your originalDateObject is March 31, and you pass -1 as monthsToAdd, then your output date will be February 28.

If you pass a large number of months, say 36, it will handle the year adjustment properly as well.

const addMonthsToDate = (originalDateObject, monthsToAdd) => {
  const originalDay = originalDateObject.getUTCDate();
  const originalMonth = originalDateObject.getUTCMonth();
  const originalYear = originalDateObject.getUTCFullYear();

  const monthDayCountMap = {
    "0": 31,
    "1": 28,
    "2": 31,
    "3": 30,
    "4": 31,
    "5": 30,
    "6": 31,
    "7": 31,
    "8": 30,
    "9": 31,
    "10": 30,
    "11": 31
  };

  let newMonth;
  if (newMonth > -1) {
    newMonth = (((originalMonth + monthsToAdd) % 12)).toString();
  } else {
    const delta = (monthsToAdd * -1) % 12;
    newMonth = originalMonth - delta < 0 ? (12+originalMonth) - delta : originalMonth - delta;
  }

  let newDay;

  if (originalDay > monthDayCountMap[newMonth]) {
    newDay = monthDayCountMap[newMonth].toString();
  } else {
    newDay = originalDay.toString();
  }

  newMonth = (+newMonth + 1).toString();

  if (newMonth.length === 1) {
    newMonth = '0' + newMonth;
  }

  if (newDay.length === 1) {
    newDay = '0' + newDay;
  }

  if (monthsToAdd <= 0) {
    monthsToAdd -= 11;
  }

  let newYear = (~~((originalMonth + monthsToAdd) / 12)) + originalYear;

  let newTime = originalDateObject.toISOString().slice(10, 24);

  const newDateISOString = `${newYear}-${newMonth}-${newDay}${newTime}`;

  return new Date(newDateISOString);
};

The macros defined in <inttypes.h> are the most correct way to print values of types uint32_t, uint16_t, and so forth -- but they're not the only way.

Personally, I find those macros difficult to remember and awkward to use. (Given the syntax of a printf format string, that's probably unavoidable; I'm not claiming I could have come up with a better system.)

An alternative is to cast the values to a predefined type and use the format for that type.

Types int and unsigned int are guaranteed by the language to be at least 16 bits wide, and therefore to be able to hold any converted value of type int16_t or uint16_t, respectively. Similarly, long and unsigned long are at least 32 bits wide, and long long and unsigned long long are at least 64 bits wide.

For example, I might write your program like this (with a few additional tweaks):

#include <stdio.h>
#include <stdint.h>
#include <netinet/in.h>  

int main(void)
{
    uint32_t a=12, a1;
    uint16_t b=1, b1;
    a1 = htonl(a);
    printf("%lu---------%lu\n", (unsigned long)a, (unsigned long)a1);
    b1 = htons(b);
    printf("%u-----%u\n", (unsigned)b, (unsigned)b1);
    return 0;
}

One advantage of this approach is that it can work even with pre-C99 implementations that don't support <inttypes.h>. Such an implementation most likely wouldn't have <stdint.h> either, but the technique is useful for other integer types.

Meteor is a framework built ontop of node.js. It uses node.js to deploy but has several differences.

The key being it uses its own packaging system instead of node's module based system. It makes it easy to make web applications using Node. Node can be used for a variety of things and on its own is terrible at serving up dynamic web content. Meteor's libraries make all of this easy.

More pythonic way:

df = data_set[['data_date', 'data_1', 'data_2']]
map(tuple,df.values)

I'm looking at this and thinking, if you can only get variables into php in a form, why not just make a form and put a hidden input in the thing so it doesn't show on screen, and then put the value from your javascript into the hidden input and POST that into the php? It would sure be a lot less hassle than some of this other stuff right?

Use a repository manager and install this kind of jars into it. That solves your problems at all and for all computers in your network.

<?php wp_make_link_relative( $link ) ?>

Convert full URL paths to relative paths.

Removes the http or https protocols and the domain. Keeps the path '/' at the beginning, so it isn't a true relative link, but from the web root base.

Reference: Wordpress Codex

To ensure that a cell will return a date value and not just a string that looks like a date, first you must set the NumberFormat property to a Date format, then put a real date into the cell's content.

Sub test_date_or_String()
 Set c = ActiveCell
 c.NumberFormat = "@"
 c.Value = CDate("03/04/2014")
   Debug.Print c.Value & " is a " & TypeName(c.Value) 'C is a String
 c.NumberFormat = "m/d/yyyy"
   Debug.Print c.Value & " is a " & TypeName(c.Value) 'C is still a String
 c.Value = CDate("03/04/2014")
   Debug.Print c.Value & " is a " & TypeName(c.Value) 'C is a date    
End Sub

without nested query

select max(e.salary) as max_salary, max(e1.salary) as 2nd_max_salary 
from employee as e
left join employee as e1 on e.salary != e1.salary
group by e.salary desc limit 1;

It is not recursion, it is overloading. The two add methods (the one in your snippet, and the one "provided" by ArrayList that you are extending) are not the same method, cause they are declared with different parameters.

See the isDigit(char ch) method:

https://docs.oracle.com/javase/1.5.0/docs/api/java/lang/Character.html

and pass it to the first character of the String using the String.charAt() method.

Character.isDigit(myString.charAt(0));

To drop a table if there is a foreign key constraint in MySQL Server?

Run the sql query:

SET FOREIGN_KEY_CHECKS = 0; DROP TABLE table_name

Hope it helps!

Put the list numbers in parentheses instead of followed by a period.

(1) item 1
(2) item 2 code block (3) item 3

I had this error in code that looked like this:

int A = 1;
int B = A;

The fix is to change it to this

int A = 1;
#define B A

The compiler assigns a location in memory to a variable. The second is trying a assign a second variable to the same location as the first - which makes no sense. Using the macro preprocessor solves the problem.

Update

I also implemented the following solution in my Python script here on GitHub.

I also verified that damaged files (jpg) frequently are not 'broken' images i.e, a damaged picture file sometimes remains a legit picture file, the original image is lost or altered but you are still able to load it with no errors. But, file truncation cause always errors.

End Update

You can use Python Pillow(PIL) module, with most image formats, to check if a file is a valid and intact image file.

In the case you aim at detecting also broken images, @Nadia Alramli correctly suggests the im.verify() method, but this does not detect all the possible image defects, e.g., im.verify does not detect truncated images (that most viewers often load with a greyed area).

Pillow is able to detect these type of defects too, but you have to apply image manipulation or image decode/recode in or to trigger the check. Finally I suggest to use this code:

try:
  im = Image.load(filename)
  im.verify() #I perform also verify, don't know if he sees other types o defects
  im.close() #reload is necessary in my case
  im = Image.load(filename) 
  im.transpose(PIL.Image.FLIP_LEFT_RIGHT)
  im.close()
except: 
  #manage excetions here

In case of image defects this code will raise an exception. Please consider that im.verify is about 100 times faster than performing the image manipulation (and I think that flip is one of the cheaper transformations). With this code you are going to verify a set of images at about 10 MBytes/sec with standard Pillow or 40 MBytes/sec with Pillow-SIMD module (modern 2.5Ghz x86_64 CPU).

For the other formats psd,xcf,.. you can use Imagemagick wrapper Wand, the code is as follows:

im = wand.image.Image(filename=filename)
temp = im.flip;
im.close()

But, from my experiments Wand does not detect truncated images, I think it loads lacking parts as greyed area without prompting.

I red that Imagemagick has an external command identify that could make the job, but I have not found a way to invoke that function programmatically and I have not tested this route.

I suggest to always perform a preliminary check, check the filesize to not be zero (or very small), is a very cheap idea:

statfile = os.stat(filename)
filesize = statfile.st_size
if filesize == 0:
  #manage here the 'faulty image' case

In XAMPP Control Panel V3.2.1, click on "NetStat" button on top right. Make sure port 80 is not used by any other program. Then click on "Shell" Right below it. Issue this command "Type ap then TAB two times"

Apache_Start.bat

You will actually see the exact error why Apache failed. It will be mostly likely virtual host configuration issue or may be something else. It will display the line number on which the error is occurring. Just fix that error. Note that in RootDocument a trailing \ can be a source of error as well. Remove any trailing "\".

you may use the below code it works fine with swift 3

var preferredLanguage : String = Bundle.main.preferredLocalizations.first!

I was running into the same problem. Because of some other issues I had tried to add a cnx.close() line to my other functions. Instead, I removed all these extraneous closes and setup my class like this:

class DBase:

config = {
      'user': 'root',
      'password': '',
      'host': '127.0.0.1',
      'database': 'bio',
      'raise_on_warnings': True,
      'use_pure': False,
      }

def __init__(self):
    import mysql.connector
    self.cnx = mysql.connector.connect(**self.config)
    self.cur = self.cnx.cursor(buffered=True)
    print(self.cnx)
def __enter__(self):
    return DBase()

def __exit__(self, exc_type, exc_val, exc_tb):
    self.cnx.commit()
    if self.cnx:
        self.cnx.close()

Any function that is called within this class is connects, commits, and closes.

This should work

<a href="javascript:window.open('document.aspx','mywindowtitle','width=500,height=150')">open window</a>

Once upon a time there was Unix and in this good old Unix there was lots of overhead for processes, so what some clever people did was to create threads, which would share the same address space with the parent process and they only needed a reduced context switch, which would make the context switch more efficient.

In a contemporary Linux (2.6.x) there is not much difference in performance between a context switch of a process compared to a thread (only the MMU stuff is additional for the thread). There is the issue with the shared address space, which means that a faulty pointer in a thread can corrupt memory of the parent process or another thread within the same address space.

A process is protected by the MMU, so a faulty pointer will just cause a signal 11 and no corruption.

I would in general use processes (not much context switch overhead in Linux, but memory protection due to MMU), but pthreads if I would need a real-time scheduler class, which is a different cup of tea all together.

Why do you think threads are have such a big performance gain on Linux? Do you have any data for this, or is it just a myth?

I know this is a little late to the party but you could use viewport units

From caniuse.com:

Viewport units: vw, vh, vmin, vmax - CR Length units representing 1% of the viewport size for viewport width (vw), height (vh), the smaller of the two (vmin), or the larger of the two (vmax).

Support: http://caniuse.com/#feat=viewport-units

div {_x000D_
/* 25% of viewport */_x000D_
  height: 25vh;_x000D_
  width: 15rem;_x000D_
  background-color: #222;_x000D_
  color: #eee;_x000D_
  font-family: monospace;_x000D_
  padding: 2rem;_x000D_
}

<div>responsive height</div>

Crockford has done a lot to popularize good JavaScript techniques. His opinionated stance on key elements of the language have sparked many useful discussions. That said, there are far too many people that take each proclamation of "bad" or "harmful" as gospel, refusing to look beyond one man's opinion. It can be a bit frustrating at times.

Use of the functionality provided by the new keyword has several advantages over building each object from scratch:

1. Prototype inheritance. While often looked at with a mix of suspicion and derision by those accustomed to class-based OO languages, JavaScript's native inheritance technique is a simple and surprisingly effective means of code re-use. And the new keyword is the canonical (and only available cross-platform) means of using it.
2. Performance. This is a side-effect of #1: if I want to add 10 methods to every object I create, I could just write a creation function that manually assigns each method to each new object... Or, I could assign them to the creation function's prototype and use new to stamp out new objects. Not only is this faster (no code needed for each and every method on the prototype), it avoids ballooning each object with separate properties for each method. On slower machines (or especially, slower JS interpreters) when many objects are being created this can mean a significant savings in time and memory.

And yes, new has one crucial disadvantage, ably described by other answers: if you forget to use it, your code will break without warning. Fortunately, that disadvantage is easily mitigated - simply add a bit of code to the function itself:

function foo()
{
   // if user accidentally omits the new keyword, this will 
   // silently correct the problem...
   if ( !(this instanceof foo) )
      return new foo();

   // constructor logic follows...
}

Now you can have the advantages of new without having to worry about problems caused by accidentally misuse. You could even add an assertion to the check if the thought of broken code silently working bothers you. Or, as some commented, use the check to introduce a runtime exception:

if ( !(this instanceof arguments.callee) ) 
   throw new Error("Constructor called as a function");

(Note that this snippet is able to avoid hard-coding the constructor function name, as unlike the previous example it has no need to actually instantiate the object - therefore, it can be copied into each target function without modification.)

John Resig goes into detail on this technique in his Simple "Class" Instantiation post, as well as including a means of building this behavior into your "classes" by default. Definitely worth a read... as is his upcoming book, Secrets of the JavaScript Ninja, which finds hidden gold in this and many other "harmful" features of the JavaScript language (the chapter on with is especially enlightening for those of us who initially dismissed this much-maligned feature as a gimmick).

For C# .Net to find and replace any guid looking string from the given text,

Use this RegEx:

[({]?[a-fA-F0-9]{8}[-]?([a-fA-F0-9]{4}[-]?){3}[a-fA-F0-9]{12}[})]?

Example C# code:

var result = Regex.Replace(
      source, 
      @"[({]?[a-fA-F0-9]{8}[-]?([a-fA-F0-9]{4}[-]?){3}[a-fA-F0-9]{12}[})]?", 
      @"${ __UUID}", 
      RegexOptions.IgnoreCase
);

Surely works! And it matches & replaces the following styles, which are all equivalent and acceptable formats for a GUID.

"aa761232bd4211cfaacd00aa0057b243" 
"AA761232-BD42-11CF-AACD-00AA0057B243" 
"{AA761232-BD42-11CF-AACD-00AA0057B243}" 
"(AA761232-BD42-11CF-AACD-00AA0057B243)" 

Some of these fall into the category of general NLog (or logging) tips rather than strictly configuration suggestions.

Here are some general logging links from here at SO (you might have seen some or all of these already):

log4net vs. Nlog

Logging best practices

What's the point of a logging facade?

Why do loggers recommend using a logger per class?

Use the common pattern of naming your logger based on the class Logger logger = LogManager.GetCurrentClassLogger(). This gives you a high degree of granularity in your loggers and gives you great flexibility in the configuration of the loggers (control globally, by namespace, by specific logger name, etc).

Use non-classname-based loggers where appropriate. Maybe you have one function for which you really want to control the logging separately. Maybe you have some cross-cutting logging concerns (performance logging).

If you don't use classname-based logging, consider naming your loggers in some kind of hierarchical structure (maybe by functional area) so that you can maintain greater flexibility in your configuration. For example, you might have a "database" functional area, an "analysis" FA, and a "ui" FA. Each of these might have sub-areas. So, you might request loggers like this:

Logger logger = LogManager.GetLogger("Database.Connect");
Logger logger = LogManager.GetLogger("Database.Query");
Logger logger = LogManager.GetLogger("Database.SQL");
Logger logger = LogManager.GetLogger("Analysis.Financial");
Logger logger = LogManager.GetLogger("Analysis.Personnel");
Logger logger = LogManager.GetLogger("Analysis.Inventory");

And so on. With hierarchical loggers, you can configure logging globally (the "*" or root logger), by FA (Database, Analysis, UI), or by subarea (Database.Connect, etc).

Loggers have many configuration options:

<logger name="Name.Space.Class1" minlevel="Debug" writeTo="f1" /> 
<logger name="Name.Space.Class1" levels="Debug,Error" writeTo="f1" /> 
<logger name="Name.Space.*" writeTo="f3,f4" />
<logger name="Name.Space.*" minlevel="Debug" maxlevel="Error" final="true" /> 

See the NLog help for more info on exactly what each of the options means. Probably the most notable items here are the ability to wildcard logger rules, the concept that multiple logger rules can "execute" for a single logging statement, and that a logger rule can be marked as "final" so subsequent rules will not execute for a given logging statement.

Use the GlobalDiagnosticContext, MappedDiagnosticContext, and NestedDiagnosticContext to add additional context to your output.

Use "variable" in your config file to simplify. For example, you might define variables for your layouts and then reference the variable in the target configuration rather than specify the layout directly.

  <variable name="brief" value="${longdate} | ${level} | ${logger} | ${message}"/>
  <variable name="verbose" value="${longdate} | ${machinename} | ${processid} | ${processname} | ${level} | ${logger} | ${message}"/>
  <targets>
    <target name="file" xsi:type="File" layout="${verbose}" fileName="${basedir}/${shortdate}.log" />
    <target name="console" xsi:type="ColoredConsole" layout="${brief}" />
  </targets>

Or, you could create a "custom" set of properties to add to a layout.

  <variable name="mycontext" value="${gdc:item=appname} , ${mdc:item=threadprop}"/>
  <variable name="fmt1withcontext" value="${longdate} | ${level} | ${logger} | [${mycontext}] |${message}"/>
  <variable name="fmt2withcontext" value="${shortdate} | ${level} | ${logger} | [${mycontext}] |${message}"/>

Or, you can do stuff like create "day" or "month" layout renderers strictly via configuration:

  <variable name="day" value="${date:format=dddd}"/>
  <variable name="month" value="${date:format=MMMM}"/>
  <variable name="fmt" value="${longdate} | ${level} | ${logger} | ${day} | ${month} | ${message}"/>
  <targets>
    <target name="console" xsi:type="ColoredConsole" layout="${fmt}" />
  </targets>

You can also use layout renders to define your filename:

  <variable name="day" value="${date:format=dddd}"/>
  <targets>
    <target name="file" xsi:type="File" layout="${verbose}" fileName="${basedir}/${day}.log" />
  </targets>

If you roll your file daily, each file could be named "Monday.log", "Tuesday.log", etc.

Don't be afraid to write your own layout renderer. It is easy and allows you to add your own context information to the log file via configuration. For example, here is a layout renderer (based on NLog 1.x, not 2.0) that can add the Trace.CorrelationManager.ActivityId to the log:

  [LayoutRenderer("ActivityId")]
  class ActivityIdLayoutRenderer : LayoutRenderer
  {
    int estimatedSize = Guid.Empty.ToString().Length;

    protected override void Append(StringBuilder builder, LogEventInfo logEvent)
    {
      builder.Append(Trace.CorrelationManager.ActivityId);
    }

    protected override int GetEstimatedBufferSize(LogEventInfo logEvent)
    {
      return estimatedSize;
    }
  }

Tell NLog where your NLog extensions (what assembly) like this:

  <extensions>
    <add assembly="MyNLogExtensions"/>
  </extensions>

Use the custom layout renderer like this:

  <variable name="fmt" value="${longdate} | ${ActivityId} | ${message}"/>

Use async targets:

<nlog>
  <targets async="true">
    <!-- all targets in this section will automatically be asynchronous -->
  </targets>
</nlog>

And default target wrappers:

<nlog>  
  <targets>  
    <default-wrapper xsi:type="BufferingWrapper" bufferSize="100"/>  
    <target name="f1" xsi:type="File" fileName="f1.txt"/>  
    <target name="f2" xsi:type="File" fileName="f2.txt"/>  
  </targets>  
  <targets>  
    <default-wrapper xsi:type="AsyncWrapper">  
      <wrapper xsi:type="RetryingWrapper"/>  
    </default-wrapper>  
    <target name="n1" xsi:type="Network" address="tcp://localhost:4001"/>  
    <target name="n2" xsi:type="Network" address="tcp://localhost:4002"/>  
    <target name="n3" xsi:type="Network" address="tcp://localhost:4003"/>  
  </targets>  
</nlog>

where appropriate. See the NLog docs for more info on those.

Tell NLog to watch and automatically reload the configuration if it changes:

<nlog autoReload="true" /> 

There are several configuration options to help with troubleshooting NLog

<nlog throwExceptions="true" />
<nlog internalLogFile="file.txt" />
<nlog internalLogLevel="Trace|Debug|Info|Warn|Error|Fatal" />
<nlog internalLogToConsole="false|true" />
<nlog internalLogToConsoleError="false|true" />

See NLog Help for more info.

NLog 2.0 adds LayoutRenderer wrappers that allow additional processing to be performed on the output of a layout renderer (such as trimming whitespace, uppercasing, lowercasing, etc).

Don't be afraid to wrap the logger if you want insulate your code from a hard dependency on NLog, but wrap correctly. There are examples of how to wrap in the NLog's github repository. Another reason to wrap might be that you want to automatically add specific context information to each logged message (by putting it into LogEventInfo.Context).

There are pros and cons to wrapping (or abstracting) NLog (or any other logging framework for that matter). With a little effort, you can find plenty of info here on SO presenting both sides.

If you are considering wrapping, consider using Common.Logging. It works pretty well and allows you to easily switch to another logging framework if you desire to do so. Also if you are considering wrapping, think about how you will handle the context objects (GDC, MDC, NDC). Common.Logging does not currently support an abstraction for them, but it is supposedly in the queue of capabilities to add.

select count(*),sum(decode(status, 'ACTIVE',1,0)) from v$session where type= 'USER'

Check your build types of each project under project properties - I bet one or the other will be set to build against .NET XX - Client Profile.

With inconsistent versions, specifically with one being Client Profile and the other not, then it works at design time but fails at compile time. A real gotcha.

There is something funny going on in Visual Studio 2010 for me, which keeps setting projects seemingly randomly to Client Profile, sometimes when I create a project, and sometimes a few days later. Probably some keyboard shortcut I'm accidentally hitting...

You are using the wrong format tokens when parsing your input. You should use ddd for an abbreviation of the name of day of the week, DD for day of the month, MMM for an abbreviation of the month's name, YYYY for the year, hh for the 1-12 hour, mm for minutes and A for AM/PM. See moment(String, String) docs.

Here is a working live sample:

console.log( moment('Mon 03-Jul-2017, 11:00 AM', 'ddd DD-MMM-YYYY, hh:mm A').format('hh:mm A') );_x000D_
console.log( moment('Mon 03-Jul-2017, 11:00 PM', 'ddd DD-MMM-YYYY, hh:mm A').format('hh:mm A') );

<script src="https://cdnjs.cloudflare.com/ajax/libs/moment.js/2.18.1/moment.min.js"></script>

What this means is that you are trying to print out/output a value which is at least partially uninitialized. Can you narrow it down so that you know exactly what value that is? After that, trace through your code to see where it is being initialized. Chances are, you will see that it is not being fully initialized.

If you need more help, posting the relevant sections of source code might allow someone to offer more guidance.

EDIT

I see you've found the problem. Note that valgrind watches for Conditional jump or move based on unitialized variables. What that means is that it will only give out a warning if the execution of the program is altered due to the uninitialized value (ie. the program takes a different branch in an if statement, for example). Since the actual arithmetic did not involve a conditional jump or move, valgrind did not warn you of that. Instead, it propagated the "uninitialized" status to the result of the statement that used it.

It may seem counterintuitive that it does not warn you immediately, but as mark4o pointed out, it does this because uninitialized values get used in C all the time (examples: padding in structures, the realloc() call, etc.) so those warnings would not be very useful due to the false positive frequency.

Or without ( and the need to escape it:

find . -not -name "*.exe" -not -name "*.dll"

and to also exclude the listing of directories

find . -not -name "*.exe" -not -name "*.dll" -not -type d

or in positive logic ;-)

find . -not -name "*.exe" -not -name "*.dll" -type f

Also WebClient doesn't have timeout property. And that's the problem, because dafault value is 100 seconds and that's too much to indicate if there's no Internet connection.

Workaround for that problem is here https://stackoverflow.com/a/3052637/1303422

some resources:

1. ELF for the ARM architecture
   http://infocenter.arm.com/help/topic/com.arm.doc.ihi0044d/IHI0044D_aaelf.pdf
2. ELF from wiki
   http://en.wikipedia.org/wiki/Executable_and_Linkable_Format

ELF format is generally the default output of compiling. if you use GNU tool chains, you can translate it to binary format by using objcopy, such as:

  arm-elf-objcopy -O binary [elf-input-file] [binary-output-file]

or using fromELF utility(built in most IDEs such as ADS though):

 fromelf -bin -o [binary-output-file] [elf-input-file]

The default to open/add rows to a table is Edit Top 200 Rows. If you have more than 200 rows, like me now, then you need to change the default setting. Here's what I did to change the edit default to 300:

1. Go to Tools in top nav
2. Select options, then SQL Service Object Explorer (on left)
3. On right side of panel, click into the field that contains 200 and change to 300 (or whatever number you wish)
4. Click OK and voila, you're all set!

Use Lambda to find the index in the List and use this index to replace the list item.

List<string> listOfStrings = new List<string> {"abc", "123", "ghi"};
listOfStrings[listOfStrings.FindIndex(ind=>ind.Equals("123"))] =  "def";

I would do something like this

DEMO in JsBin: http://jsbin.com/ofiqur/1/

  <a href="#" id="showmenu">Click Here</a>
  <div class="menu">
    <ul>
      <li><a href="#">Button 1</a></li>
      <li><a href="#">Button 2</a></li>
      <li><a href="#">Button 3</a></li>
    </ul>
  </div>

and in jQuery as simple as

var min = "-100px", // remember to set in css the same value
    max = "0px";

$(function() {
  $("#showmenu").click(function() {

    if($(".menu").css("marginLeft") == min) // is it left?
      $(".menu").animate({ marginLeft: max }); // move right
    else
      $(".menu").animate({ marginLeft: min }); // move left

  });
});

As of jQuery 1.6, you could (and some would say should) use .prop instead of .attr

$('.test').click(function(){
    alert($(this).prop('id'));
});

It is discussed further in this post: .prop() vs .attr()

Regarding the alternative to super; you'd in most cases use use the base class either in the initialization list of the derived class, or using the Base::someData syntax when you are doing work elsewhere and the derived class redefines data members.

struct Base
{
    Base(char* name) { }
    virtual ~Base();
    int d;
};

struct Derived : Base
{
    Derived() : Base("someString") { }
    int d;
    void foo() { d = Base::d; }
};

Try this query -

SELECT 
  t2.company_name,
  t2.expose_new,
  t2.expose_used,
  t1.title,
  t1.seller,
  t1.status,
  CASE status
      WHEN 'New' THEN t2.expose_new
      WHEN 'Used' THEN t2.expose_used
      ELSE NULL
  END as 'expose'
FROM
  `products` t1
JOIN manufacturers t2
  ON
    t2.id = t1.seller
WHERE
  t1.seller = 4238

Shorter and dealing with a column (entire, not just a section of a column):

=COUNTA(A:A)

COUNTA

Beware, a cell containing just a space would be included in the count.

"using" can also be used to resolve name space conflicts. See http://www.davidarno.org/c-howtos/aliases-overcoming-name-conflicts/ for a short tutorial I wrote on the subject.

EDIT: Updated for jQuery 1.8

Since jQuery 1.8 browser specific transformations will be added automatically. jsFiddle Demo

var rotation = 0;

jQuery.fn.rotate = function(degrees) {
    $(this).css({'transform' : 'rotate('+ degrees +'deg)'});
    return $(this);
};

$('.rotate').click(function() {
    rotation += 5;
    $(this).rotate(rotation);
});

EDIT: Added code to make it a jQuery function.

For those of you who don't want to read any further, here you go. For more details and examples, read on. jsFiddle Demo.

var rotation = 0;

jQuery.fn.rotate = function(degrees) {
    $(this).css({'-webkit-transform' : 'rotate('+ degrees +'deg)',
                 '-moz-transform' : 'rotate('+ degrees +'deg)',
                 '-ms-transform' : 'rotate('+ degrees +'deg)',
                 'transform' : 'rotate('+ degrees +'deg)'});
    return $(this);
};

$('.rotate').click(function() {
    rotation += 5;
    $(this).rotate(rotation);
});

EDIT: One of the comments on this post mentioned jQuery Multirotation. This plugin for jQuery essentially performs the above function with support for IE8. It may be worth using if you want maximum compatibility or more options. But for minimal overhead, I suggest the above function. It will work IE9+, Chrome, Firefox, Opera, and many others.

Bobby... This is for the people who actually want to do it in the javascript. This may be required for rotating on a javascript callback.

Here is a jsFiddle.

If you would like to rotate at custom intervals, you can use jQuery to manually set the css instead of adding a class. Like this! I have included both jQuery options at the bottom of the answer.

HTML

<div class="rotate">
    <h1>Rotatey text</h1>
</div>

CSS

/* Totally for style */
.rotate {
    background: #F02311;
    color: #FFF;
    width: 200px;
    height: 200px;
    text-align: center;
    font: normal 1em Arial;
    position: relative;
    top: 50px;
    left: 50px;
}

/* The real code */
.rotated {
    -webkit-transform: rotate(45deg);  /* Chrome, Safari 3.1+ */
    -moz-transform: rotate(45deg);  /* Firefox 3.5-15 */
    -ms-transform: rotate(45deg);  /* IE 9 */
    -o-transform: rotate(45deg);  /* Opera 10.50-12.00 */
    transform: rotate(45deg);  /* Firefox 16+, IE 10+, Opera 12.10+ */
}

jQuery

Make sure these are wrapped in $(document).ready

$('.rotate').click(function() {
    $(this).toggleClass('rotated');
});

Custom intervals

var rotation = 0;
$('.rotate').click(function() {
    rotation += 5;
    $(this).css({'-webkit-transform' : 'rotate('+ rotation +'deg)',
                 '-moz-transform' : 'rotate('+ rotation +'deg)',
                 '-ms-transform' : 'rotate('+ rotation +'deg)',
                 'transform' : 'rotate('+ rotation +'deg)'});
});

Disallow Nulls on the column and set a default on the column of getdate()

/*Deal with any existing NULLs*/
UPDATE YourTable SET created_date=GETDATE() /*Or some sentinel value 
                                                '19000101' maybe?*/
WHERE created_date IS NULL


/*Disallow NULLs*/
ALTER TABLE YourTable ALTER COLUMN created_date DATE NOT NULL

/*Add default constraint*/
ALTER TABLE YourTable ADD CONSTRAINT
    DF_YourTable_created_date DEFAULT GETDATE() FOR created_date

This might be useful for someone who is looking for a different answer. Go to the Gradle Panel and select your module -> Task -> Verification -> Check. This will check the project for errors and will print the log where the error occurs. Most of the time this Kind of error must be a typo present in your XML file of your project

If you want to avoid the mem cost of using the exec command, I believe you can do better with xargs. I think the following is a more efficient alternative to

find foo -type f ! -name '*Music*' -exec cp {} bar \; # new proc for each exec



find . -maxdepth 1 -name '*Music*' -prune -o -print0 | xargs -0 -i cp {} dest/

You can also use

Stopwatch.GetTimestamp().ToString();

I think you have to add grunt to your package.json file. See this link.

Your for loop is malformed — it can't take 4 arguments, and you can't combine two with ; as you did.

Use:

for(int a = 0, b = 1; a<cards.length-1; a++)

Turns out that the post (or rather the whole table) was locked by the very same connection that I tried to update the post with.

I had a opened record set of the post that was created by:

Set RecSet = Conn.Execute()

This type of recordset is supposed to be read-only and when I was using MS Access as database it did not lock anything. But apparently this type of record set did lock something on MS SQL Server 2012 because when I added these lines of code before executing the UPDATE SQL statement...

RecSet.Close
Set RecSet = Nothing

...everything worked just fine.

So bottom line is to be careful with opened record sets - even if they are read-only they could lock your table from updates.

Having trouble wrapping my head around this.

Have a rewrite rule with four conditions.
The first three conditions A, B, C are to be AND which is then OR with D

RewriteCond A       true
RewriteCond B       false
RewriteCond C [OR]  true
RewriteCond D       true
RewriteRule ...

But that seems to be an expression of A and B and (C or D) = false (don't rewrite)

How can I get to the desired expression? (A and B and C) or D = true (rewrite)

Preferably without using the additional steps of setting environment variables.

HELP!!!

Both codes are only relevant when the phone runs out of memory and kills the service before it finishes executing. START_STICKY tells the OS to recreate the service after it has enough memory and call onStartCommand() again with a null intent. START_NOT_STICKY tells the OS to not bother recreating the service again. There is also a third code START_REDELIVER_INTENT that tells the OS to recreate the service and redeliver the same intent to onStartCommand().

This article by Dianne Hackborn explained the background of this a lot better than the official documentation.

Source: http://android-developers.blogspot.com.au/2010/02/service-api-changes-starting-with.html

The key part here is a new result code returned by the function, telling the system what it should do with the service if its process is killed while it is running:

START_STICKY is basically the same as the previous behavior, where the service is left "started" and will later be restarted by the system. The only difference from previous versions of the platform is that it if it gets restarted because its process is killed, onStartCommand() will be called on the next instance of the service with a null Intent instead of not being called at all. Services that use this mode should always check for this case and deal with it appropriately.

START_NOT_STICKY says that, after returning from onStartCreated(), if the process is killed with no remaining start commands to deliver, then the service will be stopped instead of restarted. This makes a lot more sense for services that are intended to only run while executing commands sent to them. For example, a service may be started every 15 minutes from an alarm to poll some network state. If it gets killed while doing that work, it would be best to just let it be stopped and get started the next time the alarm fires.

START_REDELIVER_INTENT is like START_NOT_STICKY, except if the service's process is killed before it calls stopSelf() for a given intent, that intent will be re-delivered to it until it completes (unless after some number of more tries it still can't complete, at which point the system gives up). This is useful for services that are receiving commands of work to do, and want to make sure they do eventually complete the work for each command sent.

For the conversion to get the hexadecimal values in SQL back into ASCII, here is the solution I got on this (using the function from user chaos to encode into hexadecimal)

function hexEncode($data) {
    if(is_numeric($data))
        return $data;
    $unpacked = unpack('H*hex', $data);
    return '0x' . $unpacked['hex'];
}

function hexDecode($hex) {
    $str = '';
    for ($i=0; $i<strlen($hex); $i += 2)
        $str .= chr(hexdec(substr($hex, $i, 2)));
    return $str;
}

$stringHex = hexEncode('Test String');
var_dump($stringHex);
$stringAscii = hexDecode($stringHex);
var_dump($stringAscii);

I used app.all

The app.all() method is useful for mapping “global” logic for specific path prefixes or arbitrary matches.

In my case, I'm using confit for configuration management,

app.all('*', function (req, res, next) {
    confit(basedir).create(function (err, config) {
        if (err) {
            throw new Error('Failed to load configuration ', err);
        }
        app.set('config', config);
        next();
    });
});

In routes, you simply do req.app.get('config').get('cookie');

jQuery Mobile 1.4 Update:

My original article was intended for old way of page handling, basically everything before jQuery Mobile 1.4. Old way of handling is now deprecated and it will stay active until (including) jQuery Mobile 1.5, so you can still use everything mentioned below, at least until next year and jQuery Mobile 1.6.

Old events, including pageinit don't exist any more, they are replaced with pagecontainer widget. Pageinit is erased completely and you can use pagecreate instead, that event stayed the same and its not going to be changed.

If you are interested in new way of page event handling take a look here, in any other case feel free to continue with this article. You should read this answer even if you are using jQuery Mobile 1.4 +, it goes beyond page events so you will probably find a lot of useful information.

Older content:

This article can also be found as a part of my blog HERE.

$(document).on('pageinit') vs $(document).ready()

The first thing you learn in jQuery is to call code inside the $(document).ready() function so everything will execute as soon as the DOM is loaded. However, in jQuery Mobile, Ajax is used to load the contents of each page into the DOM as you navigate. Because of this $(document).ready() will trigger before your first page is loaded and every code intended for page manipulation will be executed after a page refresh. This can be a very subtle bug. On some systems it may appear that it works fine, but on others it may cause erratic, difficult to repeat weirdness to occur.

Classic jQuery syntax:

$(document).ready(function() {

});

To solve this problem (and trust me this is a problem) jQuery Mobile developers created page events. In a nutshell page events are events triggered in a particular point of page execution. One of those page events is a pageinit event and we can use it like this:

$(document).on('pageinit', function() {

});

We can go even further and use a page id instead of document selector. Let's say we have jQuery Mobile page with an id index:

<div data-role="page" id="index">
    <div data-theme="a" data-role="header">
        <h3>
            First Page
        </h3>
        <a href="#second" class="ui-btn-right">Next</a>
    </div>

    <div data-role="content">
        <a href="#" data-role="button" id="test-button">Test button</a>
    </div>

    <div data-theme="a" data-role="footer" data-position="fixed">

    </div>
</div>

To execute code that will only available to the index page we could use this syntax:

$('#index').on('pageinit', function() {

});

Pageinit event will be executed every time page is about be be loaded and shown for the first time. It will not trigger again unless page is manually refreshed or Ajax page loading is turned off. In case you want code to execute every time you visit a page it is better to use pagebeforeshow event.

Here's a working example: http://jsfiddle.net/Gajotres/Q3Usv/ to demonstrate this problem.

Few more notes on this question. No matter if you are using 1 html multiple pages or multiple HTML files paradigm it is advised to separate all of your custom JavaScript page handling into a single separate JavaScript file. This will note make your code any better but you will have much better code overview, especially while creating a jQuery Mobile application.

There's also another special jQuery Mobile event and it is called mobileinit. When jQuery Mobile starts, it triggers a mobileinit event on the document object. To override default settings, bind them to mobileinit. One of a good examples of mobileinit usage is turning off Ajax page loading, or changing default Ajax loader behavior.

$(document).on("mobileinit", function(){
  //apply overrides here
});

Page events transition order

First all events can be found here: http://api.jquerymobile.com/category/events/

Lets say we have a page A and a page B, this is a unload/load order:

1. page B - event pagebeforecreate

2. page B - event pagecreate

3. page B - event pageinit

4. page A - event pagebeforehide

5. page A - event pageremove

6. page A - event pagehide

7. page B - event pagebeforeshow

8. page B - event pageshow

For better page events understanding read this:

• pagebeforeload, pageload and pageloadfailed are fired when an external page is loaded
• pagebeforechange, pagechange and pagechangefailed are page change events. These events are fired when a user is navigating between pages in the applications.
• pagebeforeshow, pagebeforehide, pageshow and pagehide are page transition events. These events are fired before, during and after a transition and are named.
• pagebeforecreate, pagecreate and pageinit are for page initialization.
• pageremove can be fired and then handled when a page is removed from the DOM

Page loading jsFiddle example: http://jsfiddle.net/Gajotres/QGnft/

If AJAX is not enabled, some events may not fire.

Prevent page transition

If for some reason page transition needs to be prevented on some condition it can be done with this code:

$(document).on('pagebeforechange', function(e, data){
    var to = data.toPage,
        from = data.options.fromPage;

    if (typeof to  === 'string') {
        var u = $.mobile.path.parseUrl(to);
        to = u.hash || '#' + u.pathname.substring(1);
        if (from) from = '#' + from.attr('id');

        if (from === '#index' && to === '#second') {
            alert('Can not transition from #index to #second!');
            e.preventDefault();
            e.stopPropagation();

            // remove active status on a button, if transition was triggered with a button
            $.mobile.activePage.find('.ui-btn-active').removeClass('ui-btn-active ui-focus ui-btn');;
        }
    }
});

This example will work in any case because it will trigger at a begging of every page transition and what is most important it will prevent page change before page transition can occur.

Here's a working example:

Prevent multiple event binding/triggering

jQuery Mobile works in a different way than classic web applications. Depending on how you managed to bind your events each time you visit some page it will bind events over and over. This is not an error, it is simply how jQuery Mobile handles its pages. For example, take a look at this code snippet:

$(document).on('pagebeforeshow','#index' ,function(e,data){
    $(document).on('click', '#test-button',function(e) {
        alert('Button click');
    });
});

Working jsFiddle example: http://jsfiddle.net/Gajotres/CCfL4/

Each time you visit page #index click event will is going to be bound to button #test-button. Test it by moving from page 1 to page 2 and back several times. There are few ways to prevent this problem:

Solution 1

Best solution would be to use pageinit to bind events. If you take a look at an official documentation you will find out that pageinit will trigger ONLY once, just like document ready, so there's no way events will be bound again. This is best solution because you don't have processing overhead like when removing events with off method.

Working jsFiddle example: http://jsfiddle.net/Gajotres/AAFH8/

This working solution is made on a basis of a previous problematic example.

Solution 2

Remove event before you bind it:

$(document).on('pagebeforeshow', '#index', function(){
    $(document).off('click', '#test-button').on('click', '#test-button',function(e) {
        alert('Button click');
    });
});

Working jsFiddle example: http://jsfiddle.net/Gajotres/K8YmG/

Solution 3

Use a jQuery Filter selector, like this:

$('#carousel div:Event(!click)').each(function(){
    //If click is not bind to #carousel div do something
});

Because event filter is not a part of official jQuery framework it can be found here: http://www.codenothing.com/archives/2009/event-filter/

In a nutshell, if speed is your main concern then Solution 2 is much better than Solution 1.

Solution 4

A new one, probably an easiest of them all.

$(document).on('pagebeforeshow', '#index', function(){
    $(document).on('click', '#test-button',function(e) {
        if(e.handled !== true) // This will prevent event triggering more than once
        {
            alert('Clicked');
            e.handled = true;
        }
    });
});

Working jsFiddle example: http://jsfiddle.net/Gajotres/Yerv9/

Tnx to the sholsinger for this solution: http://sholsinger.com/archive/2011/08/prevent-jquery-live-handlers-from-firing-multiple-times/

pageChange event quirks - triggering twice

Sometimes pagechange event can trigger twice and it does not have anything to do with the problem mentioned before.

The reason the pagebeforechange event occurs twice is due to the recursive call in changePage when toPage is not a jQuery enhanced DOM object. This recursion is dangerous, as the developer is allowed to change the toPage within the event. If the developer consistently sets toPage to a string, within the pagebeforechange event handler, regardless of whether or not it was an object an infinite recursive loop will result. The pageload event passes the new page as the page property of the data object (This should be added to the documentation, it's not listed currently). The pageload event could therefore be used to access the loaded page.

In few words this is happening because you are sending additional parameters through pageChange.

Example:

<a data-role="button" data-icon="arrow-r" data-iconpos="right" href="#care-plan-view?id=9e273f31-2672-47fd-9baa-6c35f093a800&amp;name=Sat"><h3>Sat</h3></a>

To fix this problem use any page event listed in Page events transition order.

Page Change Times

As mentioned, when you change from one jQuery Mobile page to another, typically either through clicking on a link to another jQuery Mobile page that already exists in the DOM, or by manually calling $.mobile.changePage, several events and subsequent actions occur. At a high level the following actions occur:

• A page change process is begun
• A new page is loaded
• The content for that page is “enhanced” (styled)
• A transition (slide/pop/etc) from the existing page to the new page occurs

This is a average page transition benchmark:

Page load and processing: 3 ms

Page enhance: 45 ms

Transition: 604 ms

Total time: 670 ms

*These values are in milliseconds.

So as you can see a transition event is eating almost 90% of execution time.

Data/Parameters manipulation between page transitions

It is possible to send a parameter/s from one page to another during page transition. It can be done in few ways.

Reference: https://stackoverflow.com/a/13932240/1848600

Solution 1:

You can pass values with changePage:

$.mobile.changePage('page2.html', { dataUrl : "page2.html?paremeter=123", data : { 'paremeter' : '123' }, reloadPage : true, changeHash : true });

And read them like this:

$(document).on('pagebeforeshow', "#index", function (event, data) {
    var parameters = $(this).data("url").split("?")[1];;
    parameter = parameters.replace("parameter=","");
    alert(parameter);
});

Example:

index.html

<!DOCTYPE html>_x000D_
  <html>_x000D_
    <head>_x000D_
    <meta charset="utf-8" />_x000D_
    <meta name="viewport" content="widdiv=device-widdiv, initial-scale=1.0, maximum-scale=1.0, user-scalable=no" />_x000D_
    <meta name="apple-mobile-web-app-capable" content="yes" />_x000D_
    <meta name="apple-mobile-web-app-status-bar-style" content="black" />_x000D_
    <title>_x000D_
    </title>_x000D_
    <link rel="stylesheet" href="http://code.jquery.com/mobile/1.2.0/jquery.mobile-1.2.0.min.css" />_x000D_
    <script src="http://www.dragan-gaic.info/js/jquery-1.8.2.min.js">_x000D_
    </script>_x000D_
    <script src="http://code.jquery.com/mobile/1.2.0/jquery.mobile-1.2.0.min.js"></script>_x000D_
    <script>_x000D_
        $(document).on('pagebeforeshow', "#index",function () {_x000D_
            $(document).on('click', "#changePage",function () {_x000D_
                $.mobile.changePage('second.html', { dataUrl : "second.html?paremeter=123", data : { 'paremeter' : '123' }, reloadPage : false, changeHash : true });_x000D_
            });_x000D_
        });_x000D_
_x000D_
        $(document).on('pagebeforeshow', "#second",function () {_x000D_
            var parameters = $(this).data("url").split("?")[1];;_x000D_
            parameter = parameters.replace("parameter=","");_x000D_
            alert(parameter);_x000D_
        });_x000D_
    </script>_x000D_
   </head>_x000D_
   <body>_x000D_
    <!-- Home -->_x000D_
    <div data-role="page" id="index">_x000D_
        <div data-role="header">_x000D_
            <h3>_x000D_
                First Page_x000D_
            </h3>_x000D_
        </div>_x000D_
        <div data-role="content">_x000D_
          <a data-role="button" id="changePage">Test</a>_x000D_
        </div> <!--content-->_x000D_
    </div><!--page-->_x000D_
_x000D_
  </body>_x000D_
</html>

second.html

<!DOCTYPE html>_x000D_
  <html>_x000D_
    <head>_x000D_
    <meta charset="utf-8" />_x000D_
    <meta name="viewport" content="widdiv=device-widdiv, initial-scale=1.0, maximum-scale=1.0, user-scalable=no" />_x000D_
    <meta name="apple-mobile-web-app-capable" content="yes" />_x000D_
    <meta name="apple-mobile-web-app-status-bar-style" content="black" />_x000D_
    <title>_x000D_
    </title>_x000D_
    <link rel="stylesheet" href="http://code.jquery.com/mobile/1.2.0/jquery.mobile-1.2.0.min.css" />_x000D_
    <script src="http://www.dragan-gaic.info/js/jquery-1.8.2.min.js">_x000D_
    </script>_x000D_
    <script src="http://code.jquery.com/mobile/1.2.0/jquery.mobile-1.2.0.min.js"></script>_x000D_
   </head>_x000D_
   <body>_x000D_
    <!-- Home -->_x000D_
    <div data-role="page" id="second">_x000D_
        <div data-role="header">_x000D_
            <h3>_x000D_
                Second Page_x000D_
            </h3>_x000D_
        </div>_x000D_
        <div data-role="content">_x000D_
_x000D_
        </div> <!--content-->_x000D_
    </div><!--page-->_x000D_
_x000D_
  </body>_x000D_
</html>

Solution 2:

Or you can create a persistent JavaScript object for a storage purpose. As long Ajax is used for page loading (and page is not reloaded in any way) that object will stay active.

var storeObject = {
    firstname : '',
    lastname : ''
}

Example: http://jsfiddle.net/Gajotres/9KKbx/

Solution 3:

You can also access data from the previous page like this:

$(document).on('pagebeforeshow', '#index',function (e, data) {
    alert(data.prevPage.attr('id'));
});

prevPage object holds a complete previous page.

Solution 4:

As a last solution we have a nifty HTML implementation of localStorage. It only works with HTML5 browsers (including Android and iOS browsers) but all stored data is persistent through page refresh.

if(typeof(Storage)!=="undefined") {
    localStorage.firstname="Dragan";
    localStorage.lastname="Gaic";
}

Example: http://jsfiddle.net/Gajotres/J9NTr/

Probably best solution but it will fail in some versions of iOS 5.X. It is a well know error.

Don’t Use .live() / .bind() / .delegate()

I forgot to mention (and tnx andleer for reminding me) use on/off for event binding/unbinding, live/die and bind/unbind are deprecated.

The .live() method of jQuery was seen as a godsend when it was introduced to the API in version 1.3. In a typical jQuery app there can be a lot of DOM manipulation and it can become very tedious to hook and unhook as elements come and go. The .live() method made it possible to hook an event for the life of the app based on its selector. Great right? Wrong, the .live() method is extremely slow. The .live() method actually hooks its events to the document object, which means that the event must bubble up from the element that generated the event until it reaches the document. This can be amazingly time consuming.

It is now deprecated. The folks on the jQuery team no longer recommend its use and neither do I. Even though it can be tedious to hook and unhook events, your code will be much faster without the .live() method than with it.

Instead of .live() you should use .on(). .on() is about 2-3x faster than .live(). Take a look at this event binding benchmark: http://jsperf.com/jquery-live-vs-delegate-vs-on/34, everything will be clear from there.

Benchmarking:

There's an excellent script made for jQuery Mobile page events benchmarking. It can be found here: https://github.com/jquery/jquery-mobile/blob/master/tools/page-change-time.js. But before you do anything with it I advise you to remove its alert notification system (each “change page” is going to show you this data by halting the app) and change it to console.log function.

Basically this script will log all your page events and if you read this article carefully (page events descriptions) you will know how much time jQm spent of page enhancements, page transitions ....

Final notes

Always, and I mean always read official jQuery Mobile documentation. It will usually provide you with needed information, and unlike some other documentation this one is rather good, with enough explanations and code examples.

Changes:

• 30.01.2013 - Added a new method of multiple event triggering prevention
• 31.01.2013 - Added a better clarification for chapter Data/Parameters manipulation between page transitions
• 03.02.2013 - Added new content/examples to the chapter Data/Parameters manipulation between page transitions
• 22.05.2013 - Added a solution for page transition/change prevention and added links to the official page events API documentation
• 18.05.2013 - Added another solution against multiple event binding

you can use the function below

 SELECT TRUNC(14.568,2);

the result will show :

14.56

you can also cast your variable to the desire type :

 SELECT TRUNC(YOUR_VAR::numeric,2)

In Java 8 you can use very simple method for that:

private Object retryUntilAttached(Supplier<Object> callable) {
    try {
        return callable.get();
    } catch (StaleElementReferenceException e) {
        log.warn("\tTrying once again");
        return retryUntilAttached(callable);
    }
}

you have already forwarded the response in catch block:

RequestDispatcher dd = request.getRequestDispatcher("error.jsp");

dd.forward(request, response);

so, you can not again call the :

response.sendRedirect("usertaskpage.jsp");

because it is already forwarded (committed).

So what you can do is: keep a string to assign where you need to forward the response.

    String page = "";
    try {

    } catch (Exception e) {
      page = "error.jsp";
    } finally {
      page = "usertaskpage.jsp";
    }

RequestDispatcher dd=request.getRequestDispatcher(page);
dd.forward(request, response);

As of today (2015, Aug., 1st), Apache2 in Debian Jessie, you need to edit:

root@host:/etc/apache2/mods-enabled$ vi dir.conf 

And change the order of that line, bringing index.php to the first position:

DirectoryIndex index.php index.html index.cgi index.pl index.xhtml index.htm

If you are using Homebrew, open terminal and type:

brew upgrade cocoapods

If that does not work, try:

brew install cocoapods

You can do this:

if(in_array($value, range(1, 10)) || in_array($value, range(20, 40))) {
   # enter code here
}

Listen to @milkplusvellocet, I'd recommend you to implement the Comparable interface to your class as well.

Just contributing to the answers of others:

String.compareTo() will tell you how different a string is from another.

e.g. System.out.println( "Test".compareTo("Tesu") ); will print -1 and System.out.println( "Test".compareTo("Tesa") ); will print 19

and nerdy and geeky one-line solution to this task would be:

return this.lastName.equals(s.getLastName()) ? this.lastName.compareTo(s.getLastName()) : this.firstName.compareTo(s.getFirstName());

Explanation:

this.lastName.equals(s.getLastName()) checks whether lastnames are the same or not this.lastName.compareTo(s.getLastName()) if yes, then returns comparison of last name. this.firstName.compareTo(s.getFirstName()) if not, returns the comparison of first name.

conda should have given us a simple tool like cond env rename <old> <new> but it hasn't. Simply renaming the directory, as in this previous answer, of course, breaks the hardcoded hashbangs(#!). Hence, we need to go one more level deeper to achieve what we want.

conda env list
# conda environments:
#
base                  *  /home/tgowda/miniconda3
junkdetect               /home/tgowda/miniconda3/envs/junkdetect
rtg                      /home/tgowda/miniconda3/envs/rtg

Here I am trying to rename rtg --> unsup (please bear with those names, this is my real use case)

$ cd /home/tgowda/miniconda3/envs 
$ OLD=rtg
$ NEW=unsup
$ mv $OLD $NEW   # rename dir

$ conda env list
# conda environments:
#
base                  *  /home/tgowda/miniconda3
junkdetect               /home/tgowda/miniconda3/envs/junkdetect
unsup                    /home/tgowda/miniconda3/envs/unsup


$ conda activate $NEW
$ which python
  /home/tgowda/miniconda3/envs/unsup/bin/python

the previous answer reported upto this, but wait, we are not done yet! the pending task is, $NEW/bin dir has a bunch of executable scripts with hashbangs (#!) pointing to the $OLD env paths.

See jupyter, for example:

$ which jupyter
/home/tgowda/miniconda3/envs/unsup/bin/jupyter

$ head -1 $(which jupyter) # its hashbang is still looking at old
#!/home/tgowda/miniconda3/envs/rtg/bin/python

So, we can easily fix it with a sed

$ sed  -i.bak "s:envs/$OLD/bin:envs/$NEW/bin:" $NEW/bin/*  
# `-i.bak` created backups, to be safe

$ head -1 $(which jupyter) # check if updated
#!/home/tgowda/miniconda3/envs/unsup/bin/python
$ jupyter --version # check if it works
jupyter core     : 4.6.3
jupyter-notebook : 6.0.3

$ rm $NEW/bin/*.bak  # remove backups

Now we are done

I think it should be trivial to write a portable script to do all those and bind it to conda env rename old new.

I tested this on ubuntu. For whatever unforseen reasons, if things break and you wish to revert the above changes:

$ mv $NEW  $OLD
$ sed  -i.bak "s:envs/$NEW/bin:envs/$OLD/bin:" $OLD/bin/*

Use,..

Color.parseColor("#bdbdbd");

like,

mTextView.setTextColor(Color.parseColor("#bdbdbd"));

Or if you have defined color code in resource's color.xml file than

(From API >= 23)

mTextView.setTextColor(ContextCompat.getColor(context, R.color.<name_of_color>));

(For API < 23)

mTextView.setTextColor(getResources().getColor(R.color.<name_of_color>));

By default X-Frame-Options is set to denied, to prevent clickjacking attacks. To override this, you can add the following into your spring security config

<http>    
    <headers>
        <frame-options policy="SAMEORIGIN"/>
    </headers>
</http>

Here are available options for policy

• DENY - is a default value. With this the page cannot be displayed in a frame, regardless of the site attempting to do so.
• SAMEORIGIN - I assume this is what you are looking for, so that the page will be (and can be) displayed in a frame on the same origin as the page itself
• ALLOW-FROM - Allows you to specify an origin, where the page can be displayed in a frame.

For more information take a look here.

And here to check how you can configure the headers using either XML or Java configs.

Note, that you might need also to specify appropriate strategy, based on needs.

In my case, I disabled McAfee and then successfully installed tensorflow2.0 RC

For Swift 3.x / Swift 4.0 / Swift 5.0 users with Alamofire >= 4.0 / Alamofire >= 5.0

response.response?.statusCode

More verbose example:

Alamofire.request(urlString)
        .responseString { response in
            print("Success: \(response.result.isSuccess)")
            print("Response String: \(response.result.value)")

            var statusCode = response.response?.statusCode
            if let error = response.result.error as? AFError {  
                statusCode = error._code // statusCode private                 
                switch error {
                case .invalidURL(let url):
                    print("Invalid URL: \(url) - \(error.localizedDescription)")
                case .parameterEncodingFailed(let reason):
                    print("Parameter encoding failed: \(error.localizedDescription)")
                    print("Failure Reason: \(reason)")
                case .multipartEncodingFailed(let reason):
                    print("Multipart encoding failed: \(error.localizedDescription)")
                    print("Failure Reason: \(reason)")
                case .responseValidationFailed(let reason):
                    print("Response validation failed: \(error.localizedDescription)")
                    print("Failure Reason: \(reason)")

                    switch reason {
                    case .dataFileNil, .dataFileReadFailed:
                        print("Downloaded file could not be read")
                    case .missingContentType(let acceptableContentTypes):
                        print("Content Type Missing: \(acceptableContentTypes)")
                    case .unacceptableContentType(let acceptableContentTypes, let responseContentType):
                        print("Response content type: \(responseContentType) was unacceptable: \(acceptableContentTypes)")
                    case .unacceptableStatusCode(let code):
                        print("Response status code was unacceptable: \(code)")
                        statusCode = code
                    }
                case .responseSerializationFailed(let reason):
                    print("Response serialization failed: \(error.localizedDescription)")
                    print("Failure Reason: \(reason)")
                    // statusCode = 3840 ???? maybe..
                default:break
                }

                print("Underlying error: \(error.underlyingError)")
            } else if let error = response.result.error as? URLError {
                print("URLError occurred: \(error)")
            } else {
                print("Unknown error: \(response.result.error)")
            }

            print(statusCode) // the status code
    } 

(Alamofire 4 contains a completely new error system, look here for details)

For Swift 2.x users with Alamofire >= 3.0

Alamofire.request(.GET, urlString)
      .responseString { response in
             print("Success: \(response.result.isSuccess)")
             print("Response String: \(response.result.value)")
             if let alamoError = response.result.error {
               let alamoCode = alamoError.code
               let statusCode = (response.response?.statusCode)!
             } else { //no errors
               let statusCode = (response.response?.statusCode)! //example : 200
             }
}

I had a similar problem with é char... I think the comment "it's possible that the text you're feeding it isn't UTF-8" is probably close to the mark here. I have a feeling the default collation in my instance was something else until I realized and changed to utf8... problem is the data was already there, so not sure if it converted the data or not when i changed it, displays fine in mysql workbench. End result is that php will not json encode the data, just returns false. Doesn't matter what browser you use as its the server causing my issue, php will not parse the data to utf8 if this char is present. Like i say not sure if it is due to converting the schema to utf8 after data was present or just a php bug. In this case use json_encode(utf8_encode($string));

I got the same error trying to execute flutter run on a mac. Apparently, in your flutter project, there is a file android/gradlew that is expected to be executable (and it wasn't). So in my case,

chmod a+rx android/gradlew

i used this command and execute the project

Here's a solution that also includes High(er)DPI (MDPI) devices > ~160 dots per inch like quite a few non-iOS Devices (f.e.: Google Nexus 7 2012):

.box {
    background: url( 'img/box-bg.png' ) no-repeat top left;
    width: 200px;
    height: 200px;
}
@media only screen and ( -webkit-min-device-pixel-ratio: 1.3 ),
       only screen and (    min--moz-device-pixel-ratio: 1.3 ),
       only screen and (      -o-min-device-pixel-ratio: 2.6/2 ), /* returns 1.3, see Dev.Opera */
       only screen and (         min-device-pixel-ratio: 1.3 ),
       only screen and ( min-resolution: 124.8dpi ),
       only screen and ( min-resolution: 1.3dppx ) {

       .box {
           background: url( 'img/[email protected]' ) no-repeat top left / 200px 200px;
       }

}

As @3rror404 included in his edit after receiving feedback from the comments, there's a world beyond Webkit/iPhone. One thing that bugs me with most solutions around so far like the one referenced as source above at CSS-Tricks, is that this isn't taken fully into account.
The original source went already further.

As an example the Nexus 7 (2012) screen is a TVDPI screen with a weird device-pixel-ratio of 1.325. When loading the images with normal resolution they are upscaled via interpolation and therefore blurry. For me applying this rule in the media query to include those devices succeeded in best customer feedback.

This command worked for me:

adb shell pm clear packageName

I serach about this and i find related this answer in

https://stackoverflow.com/questions/13539752/redirect-function/13539808

function redirect_url($path)
{
  header("location:".$path);
  exit;
}

Use a convert function to get all entries for a particular day.

Select * from tblErrorLog where convert(date,errorDate,101) = '12/20/2008'

See CAST and CONVERT for more info

I woudn't bother with the likelihood of collision. Just generate a random string and check if it exists. If it does, try again and you shouldn't need to do it more that a couple of times unless you have a huge number of plates already assigned.

Another solution for generating an 8-character long pseudo-random string in pure (My)SQL:

SELECT LEFT(UUID(), 8);

You can try the following (pseudo-code):

DO 
    SELECT LEFT(UUID(), 8) INTO @plate;
    INSERT INTO plates (@plate);
WHILE there_is_a_unique_constraint_violation
-- @plate is your newly assigned plate number

Since this post has received a unexpected level of attention, let me highlight ADTC's comment : the above piece of code is quite dumb and produces sequential digits.

For slightly less stupid randomness try something like this instead :

SELECT LEFT(MD5(RAND()), 8)

And for true (cryptograpically secure) randomness, use RANDOM_BYTES() rather than RAND() (but then I would consider moving this logic up to the application layer).

I would vote against display: inline-block since its not supported across browsers, IE < 8 specifically.

.wrapper {
    width:500px; /* Adjust to a total width of both .left and .right */
    margin: 0 auto;
}
.left {
    float: left;
    width: 49%; /* Not 50% because of 1px border. */
    border: 1px solid #000;
}
.right {
    float: right;
    width: 49%; /* Not 50% because of 1px border. */
    border: 1px solid #F00;
}

<div class="wrapper">
    <div class="left">Div 1</div>
    <div class="right">Div 2</div>
</div>

EDIT: If no spacing between the cells is desired just change both .left and .right to use float: left;

Specifically if you want to clear your text box in VB.NET or VB 6.0, write this code:

TextBox1.Items.Clear()

If you are using VBA, then the use this code :

TextBox1.Text = "" or TextBox1.Clear()

I agree John M has best answer to OP's question. Thought not explictly stated, the apparent purpose is to get a selected file name, whereas other answers return either counts or lists. I would add, however, that the msofiledialogfilepicker might be a better option in this case. ie:

Dim f As object
Set f = Application.FileDialog(msoFileDialogFilePicker)
dim varfile as variant 
f.show
with f
    .allowmultiselect = false
     for each varfile in .selecteditems
        msgbox varfile
     next varfile
end with

Note: the value of varfile will remain the same since multiselect is false (only one item is ever selected). I used its value outside the loop with equal success. It's probably better practice to do it as John M did, however. Also, the folder picker can be used to get a selected folder. I always prefer late binding, but I think the object is native to the default access library, so it may not be necessary here

You can simply add following file to your tests directory, and then python will run it before the tests

__init__.py file

import os
import sys
sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(__file__), '..')))

I was doing the same thing a couple days ago. Added this to my .htaccess file:

ExpiresActive On
ExpiresByType image/gif A2592000
ExpiresByType image/jpeg A2592000
ExpiresByType image/jpg A2592000
ExpiresByType image/png A2592000
ExpiresByType image/x-icon A2592000
ExpiresByType text/css A86400
ExpiresByType text/javascript A86400
ExpiresByType application/x-shockwave-flash A2592000
#
<FilesMatch "\.(gif¦jpe?g¦png¦ico¦css¦js¦swf)$">
Header set Cache-Control "public"
</FilesMatch>

And now when I run google speed page, leverage browwer caching is no longer a high priority.

Hope this helps.

Download the following jars and add it to your WEB-INF/lib directory:

• jsp-api-2.0.jar
• jstl-1.2.jar

The path should be left blank to make it default component.

{ path: '', component: DashboardComponent },

Hey its working 100%

  public static DataTable ConvertCSVtoDataTable(string strFilePath)
  {
    DataTable dt = new DataTable();
    using (StreamReader sr = new StreamReader(strFilePath))
    {
        string[] headers = sr.ReadLine().Split(',');
        foreach (string header in headers)
        {
            dt.Columns.Add(header);
        }
        while (!sr.EndOfStream)
        {
            string[] rows = sr.ReadLine().Split(',');
            DataRow dr = dt.NewRow();
            for (int i = 0; i < headers.Length; i++)
            {
                dr[i] = rows[i];
            }
            dt.Rows.Add(dr);
        }

    }


    return dt;
   }

CSV Image

Data table Imported

To format all the code in NetBeans, press Alt + Shift + F. If you want to indent lines, select the lines and press Alt + Shift + right arrow key, and to unindent, press Alt + Shift + left arrow key.

<?php

// run query
$query = mysql_query("SELECT * FROM table");

// set array
$array = array();

// look through query
while($row = mysql_fetch_assoc($query)){

  // add each row returned into an array
  $array[] = $row;

  // OR just echo the data:
  echo $row['username']; // etc

}

// debug:
print_r($array); // show all array data
echo $array[0]['username']; // print the first rows username

The following CSS based solution works for me:

<html>
 <head>
  <style type='text/css'>
   textarea {
    white-space: nowrap;
    overflow:    scroll;
    overflow-y:  hidden;
    overflow-x:  scroll;
    overflow:    -moz-scrollbars-horizontal;
   }
  </style>
 </head>
 <body>
  <form>
   <textarea>This is a long line of text for testing purposes...</textarea>
  </form>
 </body>
</html>

Adding to cchana's answer. The method "length-6" fails on non-latin values in enum.

For example (the values are in Cyrillic, table is UTF8 - utf8_general_ci. In the examples I use the variable for simplicity: selecting from schema gives the same):

set @a:="enum('? ??????','?? ????????','???????')";
select substring(@a,6,length(@a)-6);
+-------------------------------------------------------------+
| substring(@a,6,length(@a)-6)                                |
+-------------------------------------------------------------+
| '? ??????','?? ????????','???????')                         |
+-------------------------------------------------------------+

Note the closing parenthesis?

select right(@a,1);
+-------------+
| right(@a,1) |
+-------------+
| )           |
+-------------+

Well, let's try remove one more character:

select substring(@a,6,length(@a)-7);
+-------------------------------------------------------------+
| substring(@a,6,length(@a)-7)                                |
+-------------------------------------------------------------+
| '? ??????','?? ????????','???????')                         |
+-------------------------------------------------------------+

No luck! The parenthesis stays in place.

Checking (mid() function works in way similar to substring(), and both shows the same results):

select mid(@a,6,length(@a)/2);
+---------------------------------------------------------+
| mid(@a,6,length(@a)/2)                                  |
+---------------------------------------------------------+
| '? ??????','?? ????????','??????                        |
+---------------------------------------------------------+

See: the string lost only three rightmost characters. But should we replace Cyrillic with Latin, and all works just perfectly:

set @b:="enum('in use','for removal','trashed')";
select (substring(@b,6,length(@b)-6));
+----------------------------------+
| (substring(@b,6,length(@b)-6))   |
+----------------------------------+
| 'in use','for removal','trashed' |
+----------------------------------+

JFYI

Edit 20210221: the solution for non-Latin characters is CHAR_LENGTH() instead of "simple" LENGTH()

All of these options work depending on your situation, but you may not see any of them work if you're using SSMS (as mentioned in some comments SSMS hides CR/LFs)

So rather than driving yourself round the bend, Check this setting in

Tools | Options

let str = "Hello World"

console.log(str.substring(1, 3))  // el -> Excludes the last index
console.log(str.substr(1, 3))  // ell -> Includes the last index

This version is pure C and can optionally normalize the resource path. Using it with C++ is trivial:

#include <string>
#include <iostream>

int main(int argc, char** argv)
{
    const std::string src("/some.url/foo/../bar/%2e/");
    std::cout << "src=\"" << src << "\"" << std::endl;

    // either do it the C++ conformant way:
    char* dst_buf = new char[src.size() + 1];
    urldecode(dst_buf, src.c_str(), 1);
    std::string dst1(dst_buf);
    delete[] dst_buf;
    std::cout << "dst1=\"" << dst1 << "\"" << std::endl;

    // or in-place with the &[0] trick to skip the new/delete
    std::string dst2;
    dst2.resize(src.size() + 1);
    dst2.resize(urldecode(&dst2[0], src.c_str(), 1));
    std::cout << "dst2=\"" << dst2 << "\"" << std::endl;
}

Outputs:

src="/some.url/foo/../bar/%2e/"
dst1="/some.url/bar/"
dst2="/some.url/bar/"

And the actual function:

#include <stddef.h>
#include <ctype.h>

/**
 * decode a percent-encoded C string with optional path normalization
 *
 * The buffer pointed to by @dst must be at least strlen(@src) bytes.
 * Decoding stops at the first character from @src that decodes to null.
 * Path normalization will remove redundant slashes and slash+dot sequences,
 * as well as removing path components when slash+dot+dot is found. It will
 * keep the root slash (if one was present) and will stop normalization
 * at the first questionmark found (so query parameters won't be normalized).
 *
 * @param dst       destination buffer
 * @param src       source buffer
 * @param normalize perform path normalization if nonzero
 * @return          number of valid characters in @dst
 * @author          Johan Lindh <[email protected]>
 * @legalese        BSD licensed (http://opensource.org/licenses/BSD-2-Clause)
 */
ptrdiff_t urldecode(char* dst, const char* src, int normalize)
{
    char* org_dst = dst;
    int slash_dot_dot = 0;
    char ch, a, b;
    do {
        ch = *src++;
        if (ch == '%' && isxdigit(a = src[0]) && isxdigit(b = src[1])) {
            if (a < 'A') a -= '0';
            else if(a < 'a') a -= 'A' - 10;
            else a -= 'a' - 10;
            if (b < 'A') b -= '0';
            else if(b < 'a') b -= 'A' - 10;
            else b -= 'a' - 10;
            ch = 16 * a + b;
            src += 2;
        }
        if (normalize) {
            switch (ch) {
            case '/':
                if (slash_dot_dot < 3) {
                    /* compress consecutive slashes and remove slash-dot */
                    dst -= slash_dot_dot;
                    slash_dot_dot = 1;
                    break;
                }
                /* fall-through */
            case '?':
                /* at start of query, stop normalizing */
                if (ch == '?')
                    normalize = 0;
                /* fall-through */
            case '\0':
                if (slash_dot_dot > 1) {
                    /* remove trailing slash-dot-(dot) */
                    dst -= slash_dot_dot;
                    /* remove parent directory if it was two dots */
                    if (slash_dot_dot == 3)
                        while (dst > org_dst && *--dst != '/')
                            /* empty body */;
                    slash_dot_dot = (ch == '/') ? 1 : 0;
                    /* keep the root slash if any */
                    if (!slash_dot_dot && dst == org_dst && *dst == '/')
                        ++dst;
                }
                break;
            case '.':
                if (slash_dot_dot == 1 || slash_dot_dot == 2) {
                    ++slash_dot_dot;
                    break;
                }
                /* fall-through */
            default:
                slash_dot_dot = 0;
            }
        }
        *dst++ = ch;
    } while(ch);
    return (dst - org_dst) - 1;
}

For fine tuning the position of an inline-block item, use top and left:

  position: relative;
  top: 5px;
  left: 5px;

Thanks CSS-Tricks!

Windows 10 Home Edition does not have Local Users and Groups option so that is the reason you aren't able to see that in Computer Management.

You can use User Accounts by pressing Window+R, typing netplwiz and pressing OK as described here.

You can try this:

@OneToOne(cascade = CascadeType.REFRESH) 

or

@OneToMany(cascade = CascadeType.REFRESH)

This is crazily stupid, but if you use the code:

fprintf("%x", variable)

and you use the -Wall flag while compiling, then gcc will kick out a warning of that it expects an argument of 'unsigned int' while the argument is of type '____'. (If this warning doesn't appear, then your variable is of type 'unsigned int'.)

Best of luck!

Edit: As was brought up below, this only applies to compile time. Very helpful when trying to figure out why your pointers aren't behaving, but not very useful if needed during run time.

First, bootstrap-theme.css is nothing else but equivalent of Bootstrap 2.x style in Bootstrap 3. If you really want to use it, just add it ALONG with bootstrap.css (minified version will work too).

you can simply use JSON.stringify(options) convert JSON object to string before submit, then warning dismiss and works fine

Consider:

switch(val)
{
case VAL:
   int newVal = 42;
default:
   int newVal = 23;
}

In the absence of break statements, sometimes newVal gets declared twice, and you don't know whether it does until runtime. My guess is that the limitation is because of this kind of confusion. What would the scope of newVal be? Convention would dictate that it would be the whole of the switch block (between the braces).

I'm no C++ programmer, but in C:

switch(val) {
    int x;
    case VAL:
        x=1;
}

Works fine. Declaring a variable inside a switch block is fine. Declaring after a case guard is not.

You only need one INSERT:

INSERT INTO table4 ( name, age, sex, city, id, number, nationality)
SELECT name, age, sex, city, p.id, number, n.nationality
FROM table1 p
INNER JOIN table2 c ON c.Id = p.Id
INNER JOIN table3 n ON p.Id = n.Id

For the issue was fixed when I moved

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

to the end of .zshrc

Reading quickly through the source it seems that you're not far off. The following link should help (I did something similar but for FTP). For a file send from server to client, you start off with a file instance and an array of bytes. You then read the File into the byte array and write the byte array to the OutputStream which corresponds with the InputStream on the client's side.

http://www.rgagnon.com/javadetails/java-0542.html

Edit: Here's a working ultra-minimalistic file sender and receiver. Make sure you understand what the code is doing on both sides.

package filesendtest;

import java.io.*;
import java.net.*;

class TCPServer {

    private final static String fileToSend = "C:\\test1.pdf";

    public static void main(String args[]) {

        while (true) {
            ServerSocket welcomeSocket = null;
            Socket connectionSocket = null;
            BufferedOutputStream outToClient = null;

            try {
                welcomeSocket = new ServerSocket(3248);
                connectionSocket = welcomeSocket.accept();
                outToClient = new BufferedOutputStream(connectionSocket.getOutputStream());
            } catch (IOException ex) {
                // Do exception handling
            }

            if (outToClient != null) {
                File myFile = new File( fileToSend );
                byte[] mybytearray = new byte[(int) myFile.length()];

                FileInputStream fis = null;

                try {
                    fis = new FileInputStream(myFile);
                } catch (FileNotFoundException ex) {
                    // Do exception handling
                }
                BufferedInputStream bis = new BufferedInputStream(fis);

                try {
                    bis.read(mybytearray, 0, mybytearray.length);
                    outToClient.write(mybytearray, 0, mybytearray.length);
                    outToClient.flush();
                    outToClient.close();
                    connectionSocket.close();

                    // File sent, exit the main method
                    return;
                } catch (IOException ex) {
                    // Do exception handling
                }
            }
        }
    }
}

package filesendtest;

import java.io.*;
import java.io.ByteArrayOutputStream;
import java.net.*;

class TCPClient {

    private final static String serverIP = "127.0.0.1";
    private final static int serverPort = 3248;
    private final static String fileOutput = "C:\\testout.pdf";

    public static void main(String args[]) {
        byte[] aByte = new byte[1];
        int bytesRead;

        Socket clientSocket = null;
        InputStream is = null;

        try {
            clientSocket = new Socket( serverIP , serverPort );
            is = clientSocket.getInputStream();
        } catch (IOException ex) {
            // Do exception handling
        }

        ByteArrayOutputStream baos = new ByteArrayOutputStream();

        if (is != null) {

            FileOutputStream fos = null;
            BufferedOutputStream bos = null;
            try {
                fos = new FileOutputStream( fileOutput );
                bos = new BufferedOutputStream(fos);
                bytesRead = is.read(aByte, 0, aByte.length);

                do {
                        baos.write(aByte);
                        bytesRead = is.read(aByte);
                } while (bytesRead != -1);

                bos.write(baos.toByteArray());
                bos.flush();
                bos.close();
                clientSocket.close();
            } catch (IOException ex) {
                // Do exception handling
            }
        }
    }
}

Related

Byte array of unknown length in java

Edit: The following could be used to fingerprint small files before and after transfer (use SHA if you feel it's necessary):

public static String md5String(File file) {
    try {
        InputStream fin = new FileInputStream(file);
        java.security.MessageDigest md5er = MessageDigest.getInstance("MD5");
        byte[] buffer = new byte[1024];
        int read;
        do {
            read = fin.read(buffer);
            if (read > 0) {
                md5er.update(buffer, 0, read);
            }
        } while (read != -1);
        fin.close();
        byte[] digest = md5er.digest();
        if (digest == null) {
            return null;
        }
        String strDigest = "0x";
        for (int i = 0; i < digest.length; i++) {
            strDigest += Integer.toString((digest[i] & 0xff)
                    + 0x100, 16).substring(1).toUpperCase();
        }
        return strDigest;
    } catch (Exception e) {
        return null;
    }
}

I wrote a wrapper, that will cache text surfaces, only re-render when dirty. googlecode/ninmonkey/nin.text/demo/

I collected some ideas from other SO question (largely from here and this css page)

Fiddle

The idea is to use relative and absolute positioning to move your line to the bottom:

@media (min-width: 768px ) {
.row {
    position: relative;
}

#bottom-align-text {
    position: absolute;
    bottom: 0;
    right: 0;
  }}

The display:flex option is at the moment a solution to make the div get the same size as its parent. This breaks on the other hand the bootstrap possibilities to auto-linebreak on small devices by adding col-sx-12 class. (This is why the media query is needed)

The value attribute of a checkbox is what you set by:

<input type='checkbox' name='test' value='1'>

So when someone checks that box, the server receives a variable named test with a value of 1 - what you want to check for is not the value of it (which will never change, whether it is checked or not) but the checked status of the checkbox.

So, if you replace this code:

if (arrChecks[i].value == "on") 
{
    arrChecks[i].checked = 1;
} else {
    arrChecks[i].checked = 0;
}

With this:

arrChecks[i].checked = !arrChecks[i].checked;

It should work. You should use true and false instead of 0 and 1 for this.

I just read in the MySQL documentation that SHOW FULL PROCESSLIST by default only lists the threads from your current user connection.

Quote from the MySQL SHOW FULL PROCESSLIST documentation:

If you have the PROCESS privilege, you can see all threads.

So you can enable the Process_priv column in your mysql.user table. Remember to execute FLUSH PRIVILEGES afterwards :)

What you are asking is thoroughly covered by Eric Lippert in his blog post Closing over the loop variable considered harmful and its sequel.

For me, the most convincing argument is that having new variable in each iteration would be inconsistent with for(;;) style loop. Would you expect to have a new int i in each iteration of for (int i = 0; i < 10; i++)?

The most common problem with this behavior is making a closure over iteration variable and it has an easy workaround:

foreach (var s in strings)
{
    var s_for_closure = s;
    query = query.Where(i => i.Prop == s_for_closure); // access to modified closure

My blog post about this issue: Closure over foreach variable in C#.

If the list is sorted (as happens to be in the example) a binary search on index certainly works.

    public static Dog Find(List<Dog> AllDogs, string Id)
    {
        int p = 0;
        int n = AllDogs.Count;
        while (true)
        {
            int m = (n + p) / 2;
            Dog d = AllDogs[m];
            int r = string.Compare(Id, d.Id);
            if (r == 0)
                return d;
            if (m == p)
                return null;
            if (r < 0)
                n = m;
            if (r > 0)
                p = m;
        }
    }

Not sure what the LINQ version of this would be.

There is a tiny drop-in replacement for the standard android Log class - https://github.com/zserge/log

Basically all you have to do is to replace imports from android.util.Log to trikita.log.Log. Then in your Application.onCreate() or in some static initalizer check for the BuilConfig.DEBUG or any other flag and use Log.level(Log.D) or Log.level(Log.E) to change the minimal log level. You can use Log.useLog(false) to disable logging at all.

Basically it should be

<textarea>something here with no spaces in the begining</textarea>

If there are some predefined spaces lets say due to code formatting like below

<textarea>.......
....some_variable
</textarea>

The spaces shown by dots keeps on adding on each submit.

A program I wrote, farmComm, may solve this. I released it as open-source and Public Domain.

If it doesn't meet your criteria, you may be able to easily alter it to do so.

farmComm:

• Runs at boot-up under a service, which continues when users log in or out.
  • In Session 0
  • Under the user "NT AUTHORITY\SYSTEM."
• Spawns arbitrary processes (you choose);
  • Also in Session 0
  • "Invisibly," or without showing any user interface/GUI
  • With access to graphics hardware (e.g. GPUs).
  • Responds to the active session, even if it changes, including the Secure Desktop. This is how it:
  • Only spawns processes after a user is idle for 8.5 minutes
  • Terminates spawns when a user resumes from idle

The source scripts are available here:

https://github.com/r-alex-hall/farmComm

Use

HyperLink hlRow = new HyperLink();
hlRow.Attributes.Add("Style", "color:#000000");

Here is a solution that guarantees entire file will be read, that requires no libraries and is efficient:

byte[] fullyReadFileToBytes(File f) throws IOException {
    int size = (int) f.length();
    byte bytes[] = new byte[size];
    byte tmpBuff[] = new byte[size];
    FileInputStream fis= new FileInputStream(f);;
    try {

        int read = fis.read(bytes, 0, size);
        if (read < size) {
            int remain = size - read;
            while (remain > 0) {
                read = fis.read(tmpBuff, 0, remain);
                System.arraycopy(tmpBuff, 0, bytes, size - remain, read);
                remain -= read;
            }
        }
    }  catch (IOException e){
        throw e;
    } finally {
        fis.close();
    }

    return bytes;
}

NOTE: it assumes file size is less than MAX_INT bytes, you can add handling for that if you want.

Some plugins require one to run as an Administrator and will not load unless one has those credentials active in the shell.

while Alexey Kukanov's answer may be more efficient, you can also iterate through a queue in a very natural manner, by popping each element from the front of the queue, then pushing it to the back:

#include <iostream>
#include <queue>

using namespace std;

int main() {
    //populate queue
    queue<int> q;
    for (int i = 0; i < 10; ++i) q.push(i);

    // iterate through queue
    for (size_t i = 0; i < q.size(); ++i) {
        int elem = std::move(q.front());
        q.pop();
        elem *= elem;
        q.push(std::move(elem));
    }

    //print queue
    while (!q.empty()) {
        cout << q.front() << ' ';
        q.pop();
    }
}

output:

0 1 4 9 16 25 36 49 64 81 

Based on this solution from bluefeet here is a stored procedure that uses dynamic sql to generate the transposed table. It requires that all the fields are numeric except for the transposed column (the column that will be the header in the resulting table):

/****** Object:  StoredProcedure [dbo].[SQLTranspose]    Script Date: 11/10/2015 7:08:02 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:      Paco Zarate
-- Create date: 2015-11-10
-- Description: SQLTranspose dynamically changes a table to show rows as headers. It needs that all the values are numeric except for the field using for     transposing.
-- Parameters: @TableName - Table to transpose
--             @FieldNameTranspose - Column that will be the new headers
-- Usage: exec SQLTranspose <table>, <FieldToTranspose>
-- =============================================
ALTER PROCEDURE [dbo].[SQLTranspose] 
  -- Add the parameters for the stored procedure here
  @TableName NVarchar(MAX) = '', 
  @FieldNameTranspose NVarchar(MAX) = ''
AS
BEGIN
  -- SET NOCOUNT ON added to prevent extra result sets from
  -- interfering with SELECT statements.
  SET NOCOUNT ON;

  DECLARE @colsUnpivot AS NVARCHAR(MAX),
  @query  AS NVARCHAR(MAX),
  @queryPivot  AS NVARCHAR(MAX),
  @colsPivot as  NVARCHAR(MAX),
  @columnToPivot as NVARCHAR(MAX),
  @tableToPivot as NVARCHAR(MAX), 
  @colsResult as xml

  select @tableToPivot = @TableName;
  select @columnToPivot = @FieldNameTranspose


  select @colsUnpivot = stuff((select ','+quotename(C.name)
       from sys.columns as C
       where C.object_id = object_id(@tableToPivot) and
             C.name <> @columnToPivot 
       for xml path('')), 1, 1, '')

  set @queryPivot = 'SELECT @colsResult = (SELECT  '','' 
                    + quotename('+@columnToPivot+')
                  from '+@tableToPivot+' t
                  where '+@columnToPivot+' <> ''''
          FOR XML PATH(''''), TYPE)'

  exec sp_executesql @queryPivot, N'@colsResult xml out', @colsResult out

  select @colsPivot = STUFF(@colsResult.value('.', 'NVARCHAR(MAX)'),1,1,'')

  set @query 
    = 'select name, rowid, '+@colsPivot+'
        from
        (
          select '+@columnToPivot+' , name, value, ROW_NUMBER() over (partition by '+@columnToPivot+' order by '+@columnToPivot+') as rowid
          from '+@tableToPivot+'
          unpivot
          (
            value for name in ('+@colsUnpivot+')
          ) unpiv
        ) src
        pivot
        (
          sum(value)
          for '+@columnToPivot+' in ('+@colsPivot+')
        ) piv
        order by rowid'
  exec(@query)
END

You can test it with the table provided with this command:

exec SQLTranspose 'yourTable', 'color'

Sample XML:

<X>
<Y ATTRIB1=attrib1_value ATTRIB2=attrib2_value/>
</X>

string xPath="/" + X + "/" + Y +
"[@" + ATTRIB1 + "='" + attrib1_value + "']" +
"[@" + ATTRIB2 + "='" + attrib2_value + "']"

XPath Testbed: http://www.whitebeam.org/library/guide/TechNotes/xpathtestbed.rhtm

You can trigger Jenkins builds remotely and to pass parameters by using the following query.

JENKINS_URL/job/job-name/buildWithParameters?token=TOKEN_NAME&param_name1=value&param_name1=value

JENKINS_URL (can be) = https://<your domain name or server address>

TOKE_NAME can be created using configure tab

Expanded solution (takes table schema into account):

-- Drop default contstraint for SchemaName.TableName.ColumnName
DECLARE @schema_name NVARCHAR(256)
DECLARE @table_name NVARCHAR(256)
DECLARE @col_name NVARCHAR(256)
DECLARE @Command  NVARCHAR(1000)

set @schema_name = N'SchemaName'
set @table_name = N'TableName'
set @col_name = N'ColumnName'

SELECT @Command = 'ALTER TABLE [' + @schema_name + '].[' + @table_name + '] DROP CONSTRAINT ' + d.name
 FROM sys.tables t   
  JOIN sys.default_constraints d       
   ON d.parent_object_id = t.object_id  
  JOIN sys.schemas s
        ON s.schema_id = t.schema_id
  JOIN    sys.columns c      
   ON c.object_id = t.object_id      
    AND c.column_id = d.parent_column_id
 WHERE t.name = @table_name
    AND s.name = @schema_name 
  AND c.name = @col_name

EXECUTE (@Command)

Here is the example:

SQL> set define off;
SQL> select * from dual where dummy='&var';

no rows selected

SQL> set define on
SQL> /
Enter value for var: X
old   1: select * from dual where dummy='&var'
new   1: select * from dual where dummy='X'

D
-
X

With set define off, it took a row with &var value, prompted a user to enter a value for it and replaced &var with the entered value (in this case, X).

You could use array_map(), set the first parameter to 'strtolower' (including the quotes) and the second parameter to $lower_case_array.

Try to run:

adb tcpip 5555
adb connect 192.168.2.4

http://developer.android.com/tools/help/adb.html#wireless

If the verification logic is non-trivial, it will be messy to write a large lambda method (as your example shows). You could put all the test statements in a separate method, but I don't like to do this because it disrupts the flow of reading the test code.

Another option is to use a callback on the Setup call to store the value that was passed into the mocked method, and then write standard Assert methods to validate it. For example:

// Arrange
MyObject saveObject;
mock.Setup(c => c.Method(It.IsAny<int>(), It.IsAny<MyObject>()))
        .Callback<int, MyObject>((i, obj) => saveObject = obj)
        .Returns("xyzzy");

// Act
// ...

// Assert
// Verify Method was called once only
mock.Verify(c => c.Method(It.IsAny<int>(), It.IsAny<MyObject>()), Times.Once());
// Assert about saveObject
Assert.That(saveObject.TheProperty, Is.EqualTo(2));

You can write directly to an event log. Check the following links:
http://support.microsoft.com/kb/307024
http://msdn.microsoft.com/en-us/library/system.diagnostics.eventlog.aspx

And here's the sample from MSDN:

using System;
using System.Diagnostics;
using System.Threading;

class MySample{

    public static void Main(){

        // Create the source, if it does not already exist.
        if(!EventLog.SourceExists("MySource"))
        {
             //An event log source should not be created and immediately used.
             //There is a latency time to enable the source, it should be created
             //prior to executing the application that uses the source.
             //Execute this sample a second time to use the new source.
            EventLog.CreateEventSource("MySource", "MyNewLog");
            Console.WriteLine("CreatedEventSource");
            Console.WriteLine("Exiting, execute the application a second time to use the source.");
            // The source is created.  Exit the application to allow it to be registered.
            return;
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "MySource";

        // Write an informational entry to the event log.    
        myLog.WriteEntry("Writing to event log.");

    }
}

This question is quite old but still turns up on Google Search. The accepted question wasn't working for me anymore and seems to be aged. The latest information about cmake is written in the cmake FAQ.

There are various ways to change the path of your compiler. One way would be

Set the appropriate CMAKE_FOO_COMPILER variable(s) to a valid compiler name or full path on the command-line using cmake -D. For example:

cmake -G "Your Generator" -D CMAKE_C_COMPILER=gcc-4.2 -D CMAKE_CXX_COMPILER=g++-4.2 path/to/your/source

instead of gcc-4.2 you can write the path/to/your/compiler like this

 cmake -D CMAKE_C_COMPILER=/path/to/gcc/bin/gcc -D CMAKE_CXX_COMPILER=/path/to/gcc/bin/g++ .

One of the weird behaviour and spec in Javascript is the typeof Array is Object.

You can check if the variable is an array in couple of ways:

var isArr = data instanceof Array;
var isArr = Array.isArray(data);

But the most reliable way is:

isArr = Object.prototype.toString.call(data) == '[object Array]';

Since you tagged your question with jQuery, you can use jQuery isArray function:

var isArr = $.isArray(data);

Or you can do like this:

your_df.to_excel( r'C:\Users\full_path\excel_name.xlsx',
                  sheet_name= 'your_sheet_name'
                )

This is a more simplified answer:

public String getMyPhoneNumber()
{
    return ((TelephonyManager) getSystemService(TELEPHONY_SERVICE))
            .getLine1Number();
}

To achieve this you would do something like:

n=L[0][0]
m=len(A)
for i in range(m):
    for j in range(m):
        if L[i][j]==n:
            //do some processing
        else:
            break;

In my case, where the timezones are not available on the server, this works great:

SELECT CONVERT_TZ(`date_field`,'+00:00',@@global.time_zone) FROM `table`

Note: global.time_zone uses the server timezone. You have to make sure, that it has the desired timezone!

It is also possible, that the referenced projects targets .NET 4.0, while the Console App Project targets .NET 4.0 Client Library.

While it might not have been related to this particular case, I think someone else can find this information useful.

There is another way to do this.

From iTerm2 2.9.20140923 you can use Dynamic Profiles as stated in the documentation page:

Dynamic Profiles is a feature that allows you to store your profiles in a file outside the usual macOS preferences database. Profiles may be changed at runtime by editing one or more plist files (formatted as JSON, XML, or in binary). Changes are picked up immediately.

So it is possible to create a file like this one:

    {
        "Profiles": [{
                "Name": "MYSERVER1",
                "Guid": "MYSERVER1",
                "Custom Command": "Yes",
                "Command": "ssh [email protected]",
                "Shortcut": "M",
                "Tags": [
                    "LOCAL", "THATCOMPANY", "WORK", "NOCLOUD"
                ],
                "Badge Text": "SRV1",
            },
            {
                "Name": "MYOCEANSERVER1",
                "Guid": "MYOCEANSERVER1",
                "Custom Command": "Yes",
                "Command": "ssh [email protected]",
                "Shortcut": "O",
                "Tags": [
                    "THATCOMPANY", "WORK", "DIGITALOCEAN"
                ],
                "Badge Text": "PPOCEAN1",
            },
            {
                "Name": "PI1",
                "Guid": "PI1",
                "Custom Command": "Yes",
                "Command": "ssh [email protected]",
                "Shortcut": "1",
                "Tags": [
                    "LOCAL", "PERSONAL", "RASPBERRY", "SMALL"
                ],
                "Badge Text": "LocalServer",
            },
            {
                "Name": "VUZERO",
                "Guid": "VUZERO",
                "Custom Command": "Yes",
                "Command": "ssh [email protected]",
                "Shortcut": "0",
                "Tags": [
                    "LOCAL", "PERSONAL", "SMALL"
                ],
                "Badge Text": "TeleVision",
            }
        ]
    }

in the folder ~/Library/Application\ Support/iTerm2/DynamicProfiles/ and share it across different machines. This enables you to retain some visual differences among iterm2 installations such as font type or dimension, while synchronising remote hosts, shortcuts, commands, and even a small badge to quickly identify a session

HTML, CSS, JS are all good as given in above answers. However they won't stop user from clicking the loader and visiting page. And if page time is large, it looks broken and defeats the purpose.

So in CSS consider adding

pointer-events: none;
cursor: default;

Also, instead of using gif files, if you are using fontawesome which everybody uses now a days, consider using in your html

<i class="fa fa-spinner fa-spin">

I fiddled around and came up with this. The idea is that the object has all the Array.prototype methods defined, but executes them on a separate array object. This gives the ability to observe methods like shift(), pop() etc. Although some methods like concat() won't return the OArray object. Overloading those methods won't make the object observable if accessors are used. To achieve the latter, the accessors are defined for each index within given capacity.

Performance wise... OArray is around 10-25 times slower compared to the plain Array object. For the capasity in a range 1 - 100 the difference is 1x-3x.

class OArray {
    constructor(capacity, observer) {

        var Obj = {};
        var Ref = []; // reference object to hold values and apply array methods

        if (!observer) observer = function noop() {};

        var propertyDescriptors = Object.getOwnPropertyDescriptors(Array.prototype);

        Object.keys(propertyDescriptors).forEach(function(property) {
            // the property will be binded to Obj, but applied on Ref!

            var descriptor = propertyDescriptors[property];
            var attributes = {
                configurable: descriptor.configurable,
                enumerable: descriptor.enumerable,
                writable: descriptor.writable,
                value: function() {
                    observer.call({});
                    return descriptor.value.apply(Ref, arguments);
                }
            };
            // exception to length
            if (property === 'length') {
                delete attributes.value;
                delete attributes.writable;
                attributes.get = function() {
                    return Ref.length
                };
                attributes.set = function(length) {
                    Ref.length = length;
                };
            }

            Object.defineProperty(Obj, property, attributes);
        });

        var indexerProperties = {};
        for (var k = 0; k < capacity; k++) {

            indexerProperties[k] = {
                configurable: true,
                get: (function() {
                    var _i = k;
                    return function() {
                        return Ref[_i];
                    }
                })(),
                set: (function() {
                    var _i = k;
                    return function(value) {
                        Ref[_i] = value;
                        observer.call({});
                        return true;
                    }
                })()
            };
        }
        Object.defineProperties(Obj, indexerProperties);

        return Obj;
    }
}

The short answer here is the serial ID is computed via a hash if you don't specify it. (Static members are not inherited--they are static, there's only (1) and it belongs to the class).

http://docs.oracle.com/javase/6/docs/platform/serialization/spec/class.html

The getSerialVersionUID method returns the serialVersionUID of this class. Refer to Section 4.6, "Stream Unique Identifiers." If not specified by the class, the value returned is a hash computed from the class's name, interfaces, methods, and fields using the Secure Hash Algorithm (SHA) as defined by the National Institute of Standards.

If you alter a class or its hierarchy your hash will be different. This is a good thing. Your objects are different now that they have different members. As such, if you read it back in from its serialized form it is in fact a different object--thus the exception.

The long answer is the serialization is extremely useful, but probably shouldn't be used for persistence unless there's no other way to do it. Its a dangerous path specifically because of what you're experiencing. You should consider a database, XML, a file format and probably a JPA or other persistence structure for a pure Java project.

Use "selrow" to get the selected row Id

var myGrid = $('#myGridId');

var selectedRowId = myGrid.jqGrid("getGridParam", 'selrow');

and then use getRowData to get the selected row at index selectedRowId.

var selectedRowData = myGrid.getRowData(selectedRowId);

If the multiselect is set to true on jqGrid, then use "selarrrow" to get list of selected rows:

var selectedRowIds = myGrid.jqGrid("getGridParam", 'selarrrow');

Use loop to iterate the list of selected rows:

var selectedRowData;

for(selectedRowIndex = 0; selectedRowIndex < selectedRowIds .length; selectedRowIds ++) {

   selectedRowData = myGrid.getRowData(selectedRowIds[selectedRowIndex]);

}

Way to clean out any old versions of gems.

sudo gem cleanup

If you just want to see a list of what would be removed you can use:

sudo gem cleanup -d

You can also cleanup just a specific gem by specifying its name:

sudo gem cleanup gemname

for remove specific version like 1.1.9 only

gem uninstall gemname --version 1.1.9

If you still facing some exception to install gem, like:

invalid gem: package is corrupt, exception while verifying: undefined method `size' for nil:NilClass (NoMethodError) in /home/rails/.rvm/gems/ruby-2.1.1@project/cache/nokogiri-1.6.6.2.gem

the, you can remove it from cache:

rm /home/rails/.rvm/gems/ruby-2.1.1@project/cache/nokogiri-1.6.6.2.gem

For more detail:

http://blog.grepruby.com/2015/04/way-to-clean-up-gem-or-remove-old.html

the window.top property should be able to give what you need.

E.g.

alert(top.location.href)

See http://cross-browser.com/talk/inter-frame_comm.html

Try this:

Calendar calendar = Calendar.getInstance();
calendar.setTime(yourdate);
int hours = calendar.get(Calendar.HOUR_OF_DAY);
int minutes = calendar.get(Calendar.MINUTE);
int seconds = calendar.get(Calendar.SECOND);

Edit:

hours, minutes, seconds

above will be the hours, minutes and seconds after converting yourdate to System Timezone!

You need to use javascript:

<BODY onLoad="document.getElementById('myButton').focus();">

@Ben notes that you should not add event handlers like this. While that is another question, he recommends that you use this function:

function addLoadEvent(func) {
  var oldonload = window.onload;
  if (typeof window.onload != 'function') {
    window.onload = func;
  } else {
    window.onload = function() {
      if (oldonload) {
        oldonload();
      }
      func();
    }
  }
}

And then put a call to addLoadEvent on your page and reference a function the sets the focus to you desired textbox.

Aggregated List of Libraries

• Boost.Asio is really good.
• Asio is also available as a stand-alone library.
• ACE is also good, a bit more mature and has a couple of books to support it.
• C++ Network Library
• POCO
• Qt
• Raknet
• ZeroMQ (C++)
• nanomsg (C Library)
• nng (C Library)
• Berkeley Sockets
• libevent
• Apache APR
• yield
• Winsock2(Windows only)
• wvstreams
• zeroc
• libcurl
• libuv (Cross-platform C library)
• SFML's Network Module
• C++ Rest SDK (Casablanca)
• RCF
• Restbed (HTTP Asynchronous Framework)
• SedNL
• SDL_net
• OpenSplice|DDS
• facil.io (C, with optional HTTP and Websockets, Linux / BSD / macOS)
• GLib Networking
• grpc from Google
• GameNetworkingSockets from Valve
• CYSockets To do easy things in the easiest way

Fundamentally you hadn't declare location which is what nginx uses to bind URL with resources.

 server {
            listen       80;
            server_name  localhost;

            access_log  logs/localhost.access.log  main;

            location / {
                root /var/www/board/public;
                index index.html index.htm index.php;
            }
       }

Here is one way that I hope is easy to understand:

http://jsfiddle.net/tft4t/

$(document).ready(function() {
 $("#chkdwn2").click(function() {
   if ($(this).is(":checked")) {
      $("#dropdown").prop("disabled", true);
   } else {
      $("#dropdown").prop("disabled", false);  
   }
 });
});

If you are using C# 3.5 you could write an extension method to System.String that does the splitting you need. You then can then use syntax:

string.SplitByMyTokens();

More info and a useful example from MS here http://msdn.microsoft.com/en-us/library/bb383977.aspx

From Oracle Wiki, error 02287 is

An ORA-02287 occurs when you use a sequence where it is not allowed.

Of the places where sequences can't be used, you seem to be trying:

In a sub-query

So it seems you can't do multiples in the same statement.

The solution they offer is:

If you want the sequence value to be inserted into the column for every row created, then create a before insert trigger and fetch the sequence value in the trigger and assign it to the column

Wrap your formula with IFERROR.

=IFERROR(yourformula)

You can use BinaryReader to read each of the bytes, then use BitConverter.ToString(byte[]) to find out how each is represented in binary.

You can then use this representation and write it to a file.

The reference is available at the official site

Copy and pasting from there:

• CC | Coordinating conjunction |
• CD | Cardinal number |
• DT | Determiner |
• EX | Existential there |
• FW | Foreign word |
• IN | Preposition or subordinating conjunction |
• JJ | Adjective |
• JJR | Adjective, comparative |
• JJS | Adjective, superlative |
• LS | List item marker |
• MD | Modal |
• NN | Noun, singular or mass |
• NNS | Noun, plural |
• NNP | Proper noun, singular |
• NNPS | Proper noun, plural |
• PDT | Predeterminer |
• POS | Possessive ending |
• PRP | Personal pronoun |
• PRP$ | Possessive pronoun |
• RB | Adverb |
• RBR | Adverb, comparative |
• RBS | Adverb, superlative |
• RP | Particle |
• SYM | Symbol |
• TO | to |
• UH | Interjection |
• VB | Verb, base form |
• VBD | Verb, past tense |
• VBG | Verb, gerund or present participle |
• VBN | Verb, past participle |
• VBP | Verb, non-3rd person singular present |
• VBZ | Verb, 3rd person singular present |
• WDT | Wh-determiner |
• WP | Wh-pronoun |
• WP$ | Possessive wh-pronoun |
• WRB | Wh-adverb |

in python the operators should be in quotes: db.ProductData.update({'fromAddress':'http://localhost:7000/'}, {"$set": {'fromAddress': 'http://localhost:5000/'}},{"multi": True})

The issue in my case was I included a constructor taking parameters but not an empty constructor with the Inject annotation, like so.

@Inject public VisitorBean() {}

I just tested it without any constructor and this appears to work also.

What it correct way of installing SmartGit on Ubuntu? Thus I can have normal icon

In smartgit/bin folder, there's a shell script waiting for you: add-menuitem.sh. It does just that.

Instead of using

Console.Readline()
Console.Read()
Console.ReadKey()

you can run your program using Ctrl+F5 (if you are in Visual Studio). Then Visual Studio will keep the console window open, until you press a key.

Note: You cannot debug your code in this approach.

Solution Steps:

1. Unchecked "Automatically manage signing".

2. Select "Provisioning profile" in "Signing (Release)" section.

3. No signing certificate error will be show.

4. Then below the error has a "Manage Certificates" button. click the button.

5. This window will come. Click the + sign and click "iOS Distribution". xcode will create the private key for your distribution certificate and error will be gone.

I use ImageProcessorCore, mostly because it works .Net Core.

And it have more option such as converting types, cropping images and more

http://imageprocessor.org/imageprocessor/

"Using HTML5/Canvas/JavaScript to take screenshots" answers your problem.

You can use JavaScript/Canvas to do the job but it is still experimental.

Different IIS web servers can process different amounts of data in the 'header', according to this (now deleted) article; http://classicasp.aspfaq.com/forms/what-is-the-limit-on-form/post-parameters.html;

Note that there is no limit on the number of FORM elements you can pass via POST, but only on the aggregate size of all name/value pairs. While GET is limited to as low as 1024 characters, POST data is limited to 2 MB on IIS 4.0, and 128 KB on IIS 5.0. Each name/value is limited to 1024 characters, as imposed by the SGML spec. Of course this does not apply to files uploaded using enctype='multipart/form-data' ... I have had no problems uploading files in the 90 - 100 MB range using IIS 5.0, aside from having to increase the server.scriptTimeout value as well as my patience!

With mysql Ver 14.14 Distrib 5.7.22 the update statement is now:

update user set authentication_string=password('1111') where user='root';

while u write R. you are referring to the R.java class created by eclipse, use getResources().getString() and pass the id of the resource from which you are trying to read inside the getString() method.

Example : String[] yourStringArray = getResources().getStringArray(R.array.Your_array);

An alternative is to use sponge:

awk '{print $0}' your_file | sponge your_file

Where you replace '{print $0}' by your awk script and your_file by the name of the file you want to edit in place.

sponge absorbs entirely the input before saving it to the file.

They're the same thing. A URI is a generalization of a URL. Originally, URIs were planned to be divided into URLs (addresses) and URNs (names) but then there was little difference between a URL and URI and http URIs were used as namespaces even though they didn't actually locate any resources.

In order to switch between different views, you could directly change the window.location (using the $location service!) in index.html file

<div ng-controller="Cntrl">
        <div ng-click="changeView('edit')">
            edit
        </div>
        <div ng-click="changeView('preview')">
            preview
        </div>
</div>

Controller.js

function Cntrl ($scope,$location) {
        $scope.changeView = function(view){
            $location.path(view); // path not hash
        }
    }

and configure the router to switch to different partials based on the location ( as shown here https://github.com/angular/angular-seed/blob/master/app/app.js ). This would have the benefit of history as well as using ng-view.

Alternatively, you use ng-include with different partials and then use a ng-switch as shown in here ( https://github.com/ganarajpr/Angular-UI-Components/blob/master/index.html )

To initialize your shell run the below code

source ~/anaconda3/etc/profile.d/conda.sh
conda activate Your_env

It's Worked for me, I got the solution from the below link
https://www.codegrepper.com/code-[“CommandNotFoundError: Your shell has not been properly configured to use 'conda activate'.][1]examples/shell/CommandNotFoundError%3A+Your+shell+has+not+been+properly+configured+to+use+%27conda+activate%27.+To+initialize+your+shell%2C+run

I was having a lot of problems with justify-content, and I figured out the problem was "margin: 0 auto"

The auto part overrides the justify-content so its always displayed according to the margin and not to the justify-content.

To have multiple Xcode instances installed you can put them to different folders for example /Developer5.0.2/Xcode, but to use them in CI or build environment(command line) you need to setup some environment variables during the build. You can have more instructions here. So it is working not just with beta and fresh release, also it's working for the really old versions, you might need it to use with Marmalade or Unity plugins which is not support the latest Xcode versions yet(some times it's happens).