Programs & Examples On #K2

A good solution and without "contraptions" is the forgotten ZStack

ZStack(alignment: .top){
    Color.red
    VStack{
        Text("Hello World").font(.title)
        Text("Another").font(.body)
    }
}

Result:

jezrael's answer is good, but did not answer a question I had: Will getting the "sort" flag wrong mess up my data in any way? The answer is apparently "no", you are fine either way.

from pandas import DataFrame, concat

a = DataFrame([{'a':1,      'c':2,'d':3      }])
b = DataFrame([{'a':4,'b':5,      'd':6,'e':7}])

>>> concat([a,b],sort=False)
   a    c  d    b    e
0  1  2.0  3  NaN  NaN
0  4  NaN  6  5.0  7.0

>>> concat([a,b],sort=True)
   a    b    c  d    e
0  1  NaN  2.0  3  NaN
0  4  5.0  NaN  6  7.0

You can check for yourself.

In this fiddle, I ran a test to demonstrate the blocking nature of await, as opposed to Promise.all which will start all of the promises and while one is waiting it will go on with the others.

If you are using create-react-app on C9 just run this command to start

npm run start --public $C9_HOSTNAME

And access the app from whatever your hostname is (eg type $C_HOSTNAME in the terminal to get the hostname)

Turned out to be an issue with Webpack just not resolving an import - talk about horrible horrible error messages :(

// Had to change
import DoISuportIt from 'components/DoISuportIt';

// To (notice the missing `./`)
import DoISuportIt from './components/DoISuportIt';

Seems your initial data contains strings and not numbers. It would probably be best to ensure that the data is already of the required type up front.

However, you can convert strings to numbers like this:

pd.Series(['123', '42']).astype(float)

instead of float(series)

For more performance: A simple change is observing that after n = 3n+1, n will be even, so you can divide by 2 immediately. And n won't be 1, so you don't need to test for it. So you could save a few if statements and write:

while (n % 2 == 0) n /= 2;
if (n > 1) for (;;) {
    n = (3*n + 1) / 2;
    if (n % 2 == 0) {
        do n /= 2; while (n % 2 == 0);
        if (n == 1) break;
    }
}

Here's a big win: If you look at the lowest 8 bits of n, all the steps until you divided by 2 eight times are completely determined by those eight bits. For example, if the last eight bits are 0x01, that is in binary your number is ???? 0000 0001 then the next steps are:

3n+1 -> ???? 0000 0100
/ 2  -> ???? ?000 0010
/ 2  -> ???? ??00 0001
3n+1 -> ???? ??00 0100
/ 2  -> ???? ???0 0010
/ 2  -> ???? ???? 0001
3n+1 -> ???? ???? 0100
/ 2  -> ???? ???? ?010
/ 2  -> ???? ???? ??01
3n+1 -> ???? ???? ??00
/ 2  -> ???? ???? ???0
/ 2  -> ???? ???? ????

So all these steps can be predicted, and 256k + 1 is replaced with 81k + 1. Something similar will happen for all combinations. So you can make a loop with a big switch statement:

k = n / 256;
m = n % 256;

switch (m) {
    case 0: n = 1 * k + 0; break;
    case 1: n = 81 * k + 1; break; 
    case 2: n = 81 * k + 1; break; 
    ...
    case 155: n = 729 * k + 425; break;
    ...
}

Run the loop until n = 128, because at that point n could become 1 with fewer than eight divisions by 2, and doing eight or more steps at a time would make you miss the point where you reach 1 for the first time. Then continue the "normal" loop - or have a table prepared that tells you how many more steps are need to reach 1.

PS. I strongly suspect Peter Cordes' suggestion would make it even faster. There will be no conditional branches at all except one, and that one will be predicted correctly except when the loop actually ends. So the code would be something like

static const unsigned int multipliers [256] = { ... }
static const unsigned int adders [256] = { ... }

while (n > 128) {
    size_t lastBits = n % 256;
    n = (n >> 8) * multipliers [lastBits] + adders [lastBits];
}

In practice, you would measure whether processing the last 9, 10, 11, 12 bits of n at a time would be faster. For each bit, the number of entries in the table would double, and I excect a slowdown when the tables don't fit into L1 cache anymore.

PPS. If you need the number of operations: In each iteration we do exactly eight divisions by two, and a variable number of (3n + 1) operations, so an obvious method to count the operations would be another array. But we can actually calculate the number of steps (based on number of iterations of the loop).

We could redefine the problem slightly: Replace n with (3n + 1) / 2 if odd, and replace n with n / 2 if even. Then every iteration will do exactly 8 steps, but you could consider that cheating :-) So assume there were r operations n <- 3n+1 and s operations n <- n/2. The result will be quite exactly n' = n * 3^r / 2^s, because n <- 3n+1 means n <- 3n * (1 + 1/3n). Taking the logarithm we find r = (s + log2 (n' / n)) / log2 (3).

If we do the loop until n = 1,000,000 and have a precomputed table how many iterations are needed from any start point n = 1,000,000 then calculating r as above, rounded to the nearest integer, will give the right result unless s is truly large.

Multiple parameters can be given like below,

    @RequestMapping(value = "/mno/{objectKey}", method = RequestMethod.GET, produces = "application/json")
    public List<String> getBook(HttpServletRequest httpServletRequest, @PathVariable(name = "objectKey") String objectKey
      , @RequestParam(value = "id", defaultValue = "false")String id,@RequestParam(value = "name", defaultValue = "false") String name) throws Exception {
               //logic
}

I think structuring the project by functionalities is a practical method. It makes the project scalable and maintainable easily. And it makes each part of the project working in a total autonomy. Let me know what you think about this structure below: ANGULAR TYPESCRIPT PROJECT STRUCTURE – ANGULAR 2

source : http://www.angulartypescript.com/angular-typescript-project-structure/

This exact same error happened to me only when I tried to build my debug build type. The way I solved it was to change my google-services.json for my debug build type. My original field had a field called client_id and the value was android:com.example.exampleapp, and I just deleted the android: prefix and leave as com.example.exampleapp and after that my gradle build was successful.

Hope it helps!

EDIT

I've just added back the android: prefix in my google-services.json and it continued to work correctly. Not sure what happened exactly but I was able to solve my problem with the solution mentioned above.

I had same Problem when i was trying to create executable from program that having no main() method. When i included sample main() method like this

int main(){
  return 0;
}

It solved

Use the pre-compiled SDL2main.lib and SDL.lib for your VS2015 project's library : https://buildbot.libsdl.org/sdl-builds/sdl-visualstudio/sdl-visualstudio-2225.zip

Use nth-child, for example: http://www.w3schools.com/cssref/sel_nth-child.asp

driver.find_element(By.CSS_SELECTOR, 'p.content:nth-child(1)')

or http://www.w3schools.com/cssref/sel_firstchild.asp

driver.find_element(By.CSS_SELECTOR, 'p.content:first-child')

for me, i did this and it worked. just go to C:\Users\$your username$\AppData(which is hidden most likely)\Local\ then at this location try to find this Folder : "Android" if you don't have it already make one with the exact name and try to open the android studio again.

I think you can use db.collection.distinct(fields,query)

You will be able to get the distinct values in your case for NetworkID.

It should be something like this :

Db.collection.distinct('NetworkID')

You can use isTRUE for such cases. isTRUE is the same as { is.logical(x) && length(x) == 1 && !is.na(x) && x }

If you use shiny there you could use isTruthy which covers the following cases:

• FALSE

• NULL

• ""

• An empty atomic vector

• An atomic vector that contains only missing values

• A logical vector that contains all FALSE or missing values

• An object of class "try-error"

• A value that represents an unclicked actionButton()

Normally Python throws NameError if the variable is not defined:

>>> d[0]
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'd' is not defined

However, you've managed to stumble upon a name that already exists in Python.

Because dict is the name of a built-in type in Python you are seeing what appears to be a strange error message, but in reality it is not.

The type of dict is a type. All types are objects in Python. Thus you are actually trying to index into the type object. This is why the error message says that the "'type' object is not subscriptable."

>>> type(dict)
<type 'type'>
>>> dict[0]
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: 'type' object is not subscriptable

Note that you can blindly assign to the dict name, but you really don't want to do that. It's just going to cause you problems later.

>>> dict = {1:'a'}
>>> type(dict)
<class 'dict'>
>>> dict[1]
'a'

The true source of the problem is that you must assign variables prior to trying to use them. If you simply reorder the statements of your question, it will almost certainly work:

d = {1: "walk1.png", 2: "walk2.png", 3: "walk3.png"}
m1 = pygame.image.load(d[1])
m2 = pygame.image.load(d[2])
m3 = pygame.image.load(d[3])
playerxy = (375,130)
window.blit(m1, (playerxy))

for python 3.6, the following worked for me launch cmd.exe as administrator

pip install numpy-1.13.0+mkl-cp36-cp36m-win32 pip install scipy-0.19.1-cp36-cp36m-win32

You are writing to memory you do not own:

int board[2][50]; //make an array with 3 columns  (wrong)
                  //(actually makes an array with only two 'columns')
...
for (i=0; i<num3+1; i++)
    board[2][i] = 'O';
          ^

Change this line:

int board[2][50]; //array with 2 columns (legal indices [0-1][0-49])
          ^

To:

int board[3][50]; //array with 3 columns (legal indices [0-2][0-49])
          ^

When creating an array, the value used to initialize: [3] indicates array size.
However, when accessing existing array elements, index values are zero based.

For an array created: int board[3][50];
Legal indices are board[0][0]...board[2][49]

EDIT To address bad output comment and initialization comment

add an additional "\n" for formatting output:

Change:

  ...
  for (k=0; k<50;k++) {
     printf("%d",board[j][k]);
  }
 }

       ...

To:

  ...
  for (k=0; k<50;k++) {
     printf("%d",board[j][k]);
  }
  printf("\n");//at the end of every row, print a new line
}
...  

Initialize board variable:

int board[3][50] = {0};//initialize all elements to zero

( array initialization discussion... )

You just need to keep Program Files in double quote & rest of the command don't need any quote.

C:\"Program Files"\IAR Systems\Embedded Workbench 7.0\430\bin\icc430.exe F:\CP00 .....

To hopefully make all of this a little more concrete, here’s a worked example of configuring a Spark app to use as much of the cluster as possible: Imagine a cluster with six nodes running NodeManagers, each equipped with 16 cores and 64GB of memory. The NodeManager capacities, yarn.nodemanager.resource.memory-mb and yarn.nodemanager.resource.cpu-vcores, should probably be set to 63 * 1024 = 64512 (megabytes) and 15 respectively. We avoid allocating 100% of the resources to YARN containers because the node needs some resources to run the OS and Hadoop daemons. In this case, we leave a gigabyte and a core for these system processes. Cloudera Manager helps by accounting for these and configuring these YARN properties automatically.

The likely first impulse would be to use --num-executors 6 --executor-cores 15 --executor-memory 63G. However, this is the wrong approach because:

63GB + the executor memory overhead won’t fit within the 63GB capacity of the NodeManagers. The application master will take up a core on one of the nodes, meaning that there won’t be room for a 15-core executor on that node. 15 cores per executor can lead to bad HDFS I/O throughput.

A better option would be to use --num-executors 17 --executor-cores 5 --executor-memory 19G. Why?

This config results in three executors on all nodes except for the one with the AM, which will have two executors. --executor-memory was derived as (63/3 executors per node) = 21. 21 * 0.07 = 1.47. 21 – 1.47 ~ 19.

The explanation was given in an article in Cloudera's blog, How-to: Tune Your Apache Spark Jobs (Part 2).

The error is coming because of the parser you are using. In general, if you have HTML file/code then you need to use html5lib(documentation can be found here) & in-case you have XML file/data then you need to use lxml(documentation can be found here). You can use lxml for HTML file/code also but sometimes it gives an error as above. So, better to choose the package wisely based on the type of data/file. You can also use html_parser which is built-in module. But, this also sometimes do not work.

For more details regarding when to use which package you can see the details here

In Storyboard, select your ViewController and go to Atribute Inspector. At the very top, under Simulated Metrics you have Size and Orientation properties which are set to Inferred. Change them to desired values.

In order for an application to display properly on another screen size, you also have to setup constraints, as described by Can Poyrazoglu in the first post.

Try

let bytes = [65,108,105,99,101,39,115,32,65,100,118,101,110,116,117,114,101];_x000D_
_x000D_
let base64data = btoa(String.fromCharCode.apply(null, bytes));_x000D_
_x000D_
let a = document.createElement('a');_x000D_
a.href = 'data:;base64,' + base64data;_x000D_
a.download = 'binFile.txt'; _x000D_
a.click();

I convert here binary data to base64 (for bigger data conversion use this) - during downloading browser decode it automatically and save raw data in file. 2020.06.14 I upgrade Chrome to 83.0 and above SO snippet stop working (probably due to sandbox security restrictions) - but JSFiddle version works - here

Here you go:

data = []
table = soup.find('table', attrs={'class':'lineItemsTable'})
table_body = table.find('tbody')

rows = table_body.find_all('tr')
for row in rows:
    cols = row.find_all('td')
    cols = [ele.text.strip() for ele in cols]
    data.append([ele for ele in cols if ele]) # Get rid of empty values

This gives you:

[ [u'1359711259', u'SRF', u'08/05/2013', u'5310 4 AVE', u'K', u'19', u'125.00', u'$'], 
  [u'7086775850', u'PAS', u'12/14/2013', u'3908 6th Ave', u'K', u'40', u'125.00', u'$'], 
  [u'7355010165', u'OMT', u'12/14/2013', u'3908 6th Ave', u'K', u'40', u'145.00', u'$'], 
  [u'4002488755', u'OMT', u'02/12/2014', u'NB 1ST AVE @ E 23RD ST', u'5', u'115.00', u'$'], 
  [u'7913806837', u'OMT', u'03/03/2014', u'5015 4th Ave', u'K', u'46', u'115.00', u'$'], 
  [u'5080015366', u'OMT', u'03/10/2014', u'EB 65TH ST @ 16TH AV E', u'7', u'50.00', u'$'], 
  [u'7208770670', u'OMT', u'04/08/2014', u'333 15th St', u'K', u'70', u'65.00', u'$'], 
  [u'$0.00\n\n\nPayment Amount:']
]

Couple of things to note:

• The last row in the output above, the Payment Amount is not a part of the table but that is how the table is laid out. You can filter it out by checking if the length of the list is less than 7.
• The last column of every row will have to be handled separately since it is an input text box.

?month states:

Date-time must be a POSIXct, POSIXlt, Date, Period, chron, yearmon, yearqtr, zoo, zooreg, timeDate, xts, its, ti, jul, timeSeries, and fts objects.

Your object is a factor, not even a character vector (presumably because of stringsAsFactors = TRUE). You have to convert your vector to some datetime class, for instance to POSIXlt:

library(lubridate)
some_date <- c("01/02/1979", "03/04/1980")
month(as.POSIXlt(some_date, format="%d/%m/%Y"))
[1] 2 4

There's also a convenience function dmy, that can do the same (tip proposed by @Henrik):

month(dmy(some_date))
[1] 2 4

Going even further, @IShouldBuyABoat gives another hint that dd/mm/yyyy character formats are accepted without any explicit casting:

month(some_date)
[1] 2 4

For a list of formats, see ?strptime. You'll find that "standard unambiguous format" stands for

The default formats follow the rules of the ISO 8601 international standard which expresses a day as "2001-02-28" and a time as "14:01:02" using leading zeroes as here.

Another way of doing this is by generating the select query. Play with this fiddle.

SELECT CONCAT('SELECT ', group_concat(`COLUMN_NAME` SEPARATOR '+'), ' FROM scorecard') 
FROM  `INFORMATION_SCHEMA`.`COLUMNS` 
WHERE `TABLE_SCHEMA` = (select database()) 
AND   `TABLE_NAME`   = 'scorecard'
AND   `COLUMN_NAME` LIKE 'mark%';

The query above will generate another query that will do the selecting for you.

1. Run the above query.
2. Get the result and run that resulting query.

Sample result:

SELECT mark1+mark2+mark3 FROM scorecard

You won't have to manually add all the columns anymore.

You could just use this very simple way

<script>
  $(function() {

    $('#cd').click(function() {
      $('#dsf').val("any thing here");
    });

  });
</script>

Determining of root cause is not an issue since Go 1.8; field name now is shown in the error message:

json: cannot unmarshal object into Go struct field Comment.author of type string

Since I want my project to compile to a stand-alone EXE file, I linked the UnitTest project to the function.obj file generated from function.cpp and it works.

Right click on the 'UnitTest1' project ? Configuration Properties ? Linker ? Input ? Additional Dependencies ? add "..\MyProjectTest\Debug\function.obj".

var res = exitDictionary
            .Select(p => p.Value).Cast<Dictionary<string, object>>()
            .SelectMany(d => d)
            .Where(p => p.Key == "fieldname1")
            .Select(p => p.Value).Cast<List<Dictionary<string,string>>>()
            .SelectMany(l => l)
            .SelectMany(d=> d)
            .Where(p => p.Key == "valueTitle")
            .Select(p => p.Value)
            .ToList();

This also works, and easy to understand.

You are trying to link objects compiled by different versions of the compiler. That's not supported in modern versions of VS, at least not if you are using the C++ standard library. Different versions of the standard library are binary incompatible and so you need all the inputs to the linker to be compiled with the same version. Make sure you re-compile all the objects that are to be linked.

The compiler error names the objects involved so the information the the question already has the answer you are looking for. Specifically it seems that the static library that you are linking needs to be re-compiled.

So the solution is to recompile Projectname1.lib with VS2012.

In fact, xargs can run commands in parallel for you. There is a special -P max_procs command-line option for that. See man xargs.

It is kind of a hack but wrapping it in a timeout seems to accomplish what you are looking for:

angular.module('myApp', [])
    .controller('Ctrl', ['$scope', '$timeout', function ($scope, $timeout) {
    $scope.todos = [{
        'text': "get milk",
        'done': true
    }, {
        'text': "get milk2",
            'done': false
    }];

    $scope.onCompleteTodo = function (todo) {
        $timeout(function(){
            console.log("onCompleteTodo -done: " + todo.done + " : " + todo.text);
            $scope.doneAfterClick = todo.done;
            $scope.todoText = todo.text;
        });
    };
}]);

You can use the following if you want to render raw html in React

<div dangerouslySetInnerHTML={{__html: `html-raw-goes-here`}} />

Example - Render

Test is a good day

I think this will bring it back using 3.0

.navbar .divider-vertical {
    height: 50px;
    margin: 0 9px;
    border-right: 1px solid #ffffff;
    border-left: 1px solid #f2f2f2;
}

.navbar-inverse .divider-vertical {
    border-right-color: #222222;
    border-left-color: #111111;
}

@media (max-width: 767px) {
    .navbar-collapse .nav > .divider-vertical {
        display: none;
     }
}

Percentage in width works but percentage in height will not work unless you specify a specific height for any parent in the dependent loop...

See this : percentage in height doesn’t work?

That means that the definition of your function is not present in your program. You forgot to add that one.cpp to your program.

What "to add" means in this case depends on your build environment and its terminology. In MSVC (since you are apparently use MSVC) you'd have to add one.cpp to the project.

In more practical terms, applicable to all typical build methodologies, when you link you program, the object file created form one.cpp is missing.

Inline content leaves space at the bottom for characters that descend (j, y, q):

https://developer.mozilla.org/en-US/docs/Images,_Tables,_and_Mysterious_Gaps

There are a couple fixes:

Use display: block;

<img style="display:block;" width="100%" height="100%" src="http://dummyimage.com/68x68/000/fff" />

or use vertical-align: bottom;

<img style="vertical-align: bottom;" width="100%" height="100%" src="http://dummyimage.com/68x68/000/fff" />

When you have everything #included, an unresolved external symbol is often a missing * or & in the declaration or definition of a function.

First, let's clear up some terminology: "asynchronous" (async) means that it may yield control back to the calling thread before it starts. In an async method, those "yield" points are await expressions.

This is very different than the term "asynchronous", as (mis)used by the MSDN documentation for years to mean "executes on a background thread".

To futher confuse the issue, async is very different than "awaitable"; there are some async methods whose return types are not awaitable, and many methods returning awaitable types that are not async.

Enough about what they aren't; here's what they are:

• The async keyword allows an asynchronous method (that is, it allows await expressions). async methods may return Task, Task<T>, or (if you must) void.
• Any type that follows a certain pattern can be awaitable. The most common awaitable types are Task and Task<T>.

So, if we reformulate your question to "how can I run an operation on a background thread in a way that it's awaitable", the answer is to use Task.Run:

private Task<int> DoWorkAsync() // No async because the method does not need await
{
  return Task.Run(() =>
  {
    return 1 + 2;
  });
}

(But this pattern is a poor approach; see below).

But if your question is "how do I create an async method that can yield back to its caller instead of blocking", the answer is to declare the method async and use await for its "yielding" points:

private async Task<int> GetWebPageHtmlSizeAsync()
{
  var client = new HttpClient();
  var html = await client.GetAsync("http://www.example.com/");
  return html.Length;
}

So, the basic pattern of things is to have async code depend on "awaitables" in its await expressions. These "awaitables" can be other async methods or just regular methods returning awaitables. Regular methods returning Task/Task<T> can use Task.Run to execute code on a background thread, or (more commonly) they can use TaskCompletionSource<T> or one of its shortcuts (TaskFactory.FromAsync, Task.FromResult, etc). I don't recommend wrapping an entire method in Task.Run; synchronous methods should have synchronous signatures, and it should be left up to the consumer whether it should be wrapped in a Task.Run:

private int DoWork()
{
  return 1 + 2;
}

private void MoreSynchronousProcessing()
{
  // Execute it directly (synchronously), since we are also a synchronous method.
  var result = DoWork();
  ...
}

private async Task DoVariousThingsFromTheUIThreadAsync()
{
  // I have a bunch of async work to do, and I am executed on the UI thread.
  var result = await Task.Run(() => DoWork());
  ...
}

I have an async/await intro on my blog; at the end are some good followup resources. The MSDN docs for async are unusually good, too.

One thing you could try is using the following css:

.child-element {
    padding-left: inherit;
    padding-right: inherit;
    position: absolute;
    left: 0;
    right: 0;
}

It lets the child element inherit the padding from the parent, then the child can be positioned to match the parents widht and padding.

Also, I am using box-sizing: border-box; for the elements involved.

I have not tested this in all browsers, but it seems to be working in Chrome, Firefox and IE10.

Dependency required for jersey restful service and Tomcat is the server. where ${jersey.version} is 2.29.1

    <dependency>
        <groupId>javax.enterprise</groupId>
        <artifactId>cdi-api</artifactId>
        <version>2.0.SP1</version>
        <scope>provided</scope>
    </dependency>
    <dependency>
        <groupId>org.glassfish.jersey.core</groupId>
        <artifactId>jersey-server</artifactId>
        <version>${jersey.version}</version>
    </dependency>
    <dependency>
        <groupId>org.glassfish.jersey.containers</groupId>
        <artifactId>jersey-container-servlet</artifactId>
        <version>${jersey.version}</version>
    </dependency>
    <dependency>
        <groupId>org.glassfish.jersey.inject</groupId>
        <artifactId>jersey-hk2</artifactId>
        <version>${jersey.version}</version>
    </dependency>

The basic code will be as follows:

@RequestScoped
@Path("test")
public class RESTEndpoint {

   @GET
   public String getMessage() {

const int WIDTH = 1024;
const int HEIGHT = 800;

If you add a $scope.$apply(); right after $scope.pluginsDisplayed.splice(index,1); then it works.

I am not sure why this is happening, but basically when AngularJS doesn't know that the $scope has changed, it requires to call $apply manually. I am also new to AngularJS so cannot explain this better. I need too look more into it.

I found this awesome article that explains it quite properly. Note: I think it might be better to use ng-click (docs) rather than binding to "mousedown". I wrote a simple app here (http://avinash.me/losh, source http://github.com/hardfire/losh) based on AngularJS. It is not very clean, but it might be of help.

It works fine for me...

$(document).ready(function() {
        var date = new Date();
        var today = new Date(date.getFullYear(), date.getMonth(), date.getDate());

        $('#datepicker1').datepicker({
            format: 'dd-mm-yyyy',
            orientation: 'bottom'
        });

        $('#datepicker1').datepicker('setDate', today);

    });

This is one of the method to overcome this issue.

• Just put the prototype in the header files and include the header files in the .cpp files as shown below.

client.cpp

#ifndef SOCKET_CLIENT_CLASS
#define SOCKET_CLIENT_CLASS
#ifndef BOOST_ASIO_HPP
#include <boost/asio.hpp>
#endif

class SocketClient // Or whatever the name is... {

// ...

    bool read(int, char*); // Or whatever the name is...

//  ... };

#endif

client.h

bool SocketClient::read(int, char*)
{
    // Implementation  goes here...
}

main.cpp

#include <iostream>
#include <string>
#include <sstream>
#include <boost/asio.hpp>
#include <boost/thread/thread.hpp>
#include "client.h"
//              ^^ Notice this!

main.h

int main()

I downloaded and extracted Crypto++ in C:\cryptopp. I used Visual Studio Express 2012 to build all the projects inside (as instructed in readme), and everything was built successfully. Then I made a test project in some other folder and added cryptolib as a dependency.

The conversion was probably not successful. The only thing that was successful was the running of VCUpgrade. The actual conversion itself failed but you don't know until you experience the errors you are seeing. For some of the details, see Visual Studio on the Crypto++ wiki.

Any ideas how to fix this?

To resolve your issues, you should download vs2010.zip if you want static C/C++ runtime linking (/MT or /MTd), or vs2010-dynamic.zip if you want dynamic C/C++ runtime linking (/MT or /MTd). Both fix the latent, silent failures produced by VCUpgrade.

vs2010.zip, vs2010-dynamic.zip and vs2005-dynamic.zip are built from the latest GitHub sources. As of this writing (JUN 1 2016), that's effectively pre-Crypto++ 5.6.4. If you are using the ZIP files with a down level Crypto++, like 5.6.2 or 5.6.3, then you will run into minor problems.

There are two minor problems I am aware. First is a rename of bench.cpp to bench1.cpp. Its error is either:

• C1083: Cannot open source file: 'bench1.cpp': No such file or directory
• LNK2001: unresolved external symbol "void __cdecl OutputResultOperations(char const *,char const *,bool,unsigned long,double)" (?OutputResultOperations@@YAXPBD0_NKN@Z)

The fix is to either (1) open cryptest.vcxproj in notepad, find bench1.cpp, and then rename it to bench.cpp. Or (2) rename bench.cpp to bench1.cpp on the filesystem. Please don't delete this file.

The second problem is a little trickier because its a moving target. Down level releases, like 5.6.2 or 5.6.3, are missing the latest classes available in GitHub. The missing class files include HKDF (5.6.3), RDRAND (5.6.3), RDSEED (5.6.3), ChaCha (5.6.4), BLAKE2 (5.6.4), Poly1305 (5.6.4), etc.

The fix is to remove the missing source files from the Visual Studio project files since they don't exist for the down level releases.

Another option is to add the missing class files from the latest sources, but there could be complications. For example, many of the sources subtly depend upon the latest config.h, cpu.h and cpu.cpp. The "subtlety" is you won't realize you are getting an under-performing class.

An example of under-performing class is BLAKE2. config.h adds compile time ARM-32 and ARM-64 detection. cpu.h and cpu.cpp adds runtime ARM instruction detection, which depends upon compile time detection. If you add BLAKE2 without the other files, then none of the detection occurs and you get a straight C/C++ implementation. You probably won't realize you are missing the NEON opportunity, which runs around 9 to 12 cycles-per-byte versus 40 cycles-per-byte or so for vanilla C/C++.

I hope this answer is still useful, despite problem seems to be quite old.

If you have Anaconda installed, and your OpenCV does not support GTK+ (as in this case), you can simply type

conda install -c menpo opencv=2.4.11

It will install suitable OpenCV version that does not produce a mentioned error. Besides, it will reinstall previously installed OpenCV if there was one as a part of Anaconda.

I would use a listener. Fragment1 calling the listener (main activity)

How about this?

>>> import numpy
>>> test1 = numpy.array([1,23,4,6,7,8])
>>> forward = iter(test1)
>>> backward = reversed(test1)
>>> for a in range((len(test1)+1)//2):
...     print forward.next(), backward.next()
... 
1 8
23 7
4 6

The (len(test1)+1)//2 ensures that the middle element of odd length arrays is also returned:

>>> test1 = numpy.array([1,23,4,9,6,7,8]) # additional element '9' in the middle
>>> forward = iter(test1)                                                      
>>> backward = reversed(test1)
>>> for a in range((len(test1)+1)//2):
...     print forward.next(), backward.next()
1 8
23 7
4 6
9 9

Using just len(test1)//2 will drop the middle elemen of odd length arrays.

How are you loading this page? Is it getting anything on POST to load? If it's not, then the $name = $_POST['Name']; assignation doesn't have any 'Name' on POST.

Just run ADB and use the following command:

adb shell pm uninstall -k --user 0 <package name>

And you should get this return:

successful

While your Sleep method is async, Thread.Sleep is not. The whole idea of async is to reuse a single thread, not to start multiple threads. Because you've blocked using a synchronous call to Thread.Sleep, it's not going to work.

I'm assuming that Thread.Sleep is a simplification of what you actually want to do. Can your actual implementation be coded as async methods?

If you do need to run multiple synchronous blocking calls, look elsewhere I think!

Your css will only work in IE browser. And the css suggessted by hayk.mart will olny work in webkit browsers. And by using different css hacks you can't style your browsers scroll bars with a same result.

So, it is better to use a jQuery/Javascript plugin to achieve a cross browser solution with a same result.

Solution:

By Using jScrollPane a jQuery plugin, you can achieve a cross browser solution

See This Demo

You can do this in-place, rather than create a new dict, which may be preferable for large dictionaries (if you do not need a copy).

def mutate_dict(f,d):
    for k, v in d.iteritems():
        d[k] = f(v)

my_dictionary = {'a':1, 'b':2}
mutate_dict(lambda x: x+1, my_dictionary)

results in my_dictionary containing:

{'a': 2, 'b': 3}

Answers above are all cool, but they all missed one thing. group executes tasks(blocks) in the thread where it entered when you use dispatch_group_enter/dispatch_group_leave.

- (IBAction)buttonAction:(id)sender {
      dispatch_queue_t demoQueue = dispatch_queue_create("com.demo.group", DISPATCH_QUEUE_CONCURRENT);
      dispatch_async(demoQueue, ^{
        dispatch_group_t demoGroup = dispatch_group_create();
        for(int i = 0; i < 10; i++) {
          dispatch_group_enter(demoGroup);
          [self testMethod:i
                     block:^{
                       dispatch_group_leave(demoGroup);
                     }];
        }

        dispatch_group_notify(demoGroup, dispatch_get_main_queue(), ^{
          NSLog(@"All group tasks are done!");
        });
      });
    }

    - (void)testMethod:(NSInteger)index block:(void(^)(void))completeBlock {
      NSLog(@"Group task started...%ld", index);
      NSLog(@"Current thread is %@ thread", [NSThread isMainThread] ? @"main" : @"not main");
      [NSThread sleepForTimeInterval:1.f];

      if(completeBlock) {
        completeBlock();
      }
    }

this runs in the created concurrent queue demoQueue. If i dont create any queue, it runs in main thread.

- (IBAction)buttonAction:(id)sender {
    dispatch_group_t demoGroup = dispatch_group_create();
    for(int i = 0; i < 10; i++) {
      dispatch_group_enter(demoGroup);
      [self testMethod:i
                 block:^{
                   dispatch_group_leave(demoGroup);
                 }];
    }

    dispatch_group_notify(demoGroup, dispatch_get_main_queue(), ^{
      NSLog(@"All group tasks are done!");
    });
    }

    - (void)testMethod:(NSInteger)index block:(void(^)(void))completeBlock {
      NSLog(@"Group task started...%ld", index);
      NSLog(@"Current thread is %@ thread", [NSThread isMainThread] ? @"main" : @"not main");
      [NSThread sleepForTimeInterval:1.f];

      if(completeBlock) {
        completeBlock();
      }
    }

and there's a third way to make tasks executed in another thread:

- (IBAction)buttonAction:(id)sender {
      dispatch_queue_t demoQueue = dispatch_queue_create("com.demo.group", DISPATCH_QUEUE_CONCURRENT);
      //  dispatch_async(demoQueue, ^{
      __weak ViewController* weakSelf = self;
      dispatch_group_t demoGroup = dispatch_group_create();
      for(int i = 0; i < 10; i++) {
        dispatch_group_enter(demoGroup);
        dispatch_async(demoQueue, ^{
          [weakSelf testMethod:i
                         block:^{
                           dispatch_group_leave(demoGroup);
                         }];
        });
      }

      dispatch_group_notify(demoGroup, dispatch_get_main_queue(), ^{
        NSLog(@"All group tasks are done!");
      });
      //  });
    }

Of course, as mentioned you can use dispatch_group_async to get what you want.

SEARCH does not return 0 if there is no match, it returns #VALUE!. So you have to wrap calls to SEARCH with IFERROR.

For example...

=IF(IFERROR(SEARCH("cat", A1), 0), "cat", "none")

or

=IF(IFERROR(SEARCH("cat",A1),0),"cat",IF(IFERROR(SEARCH("22",A1),0),"22","none"))

Here, IFERROR returns the value from SEARCH when it works; the given value of 0 otherwise.

Add bean declaration in bean.xml file or in any other configuration file . It will resolve the error

<bean  class="com.demo.dao.RailwayDao"></bean>
<bean  class="com.demo.service.RailwayService"></bean>
<bean  class="com.demo.model.RailwayReservation"></bean>

I will say before all that this will not always works, i have tested this with sans-serif font and external fonts like open sans

Sometimes, when you use huge fonts, try to approximate to font-size:49px and upper

This is a header text with a size of 48px (font-size:48px; in the element that contains the text).

But, if you up the 48px to font-size:49px; (and 50px, 60px, 80px, etc...), something interesting happens

The text automatically get smooth, and seems really good

For another side...

If you are looking for small fonts, you can try this, but isn't very effective.

To the parent of the text, just apply the next css property: -webkit-backface-visibility: hidden;

You can transform something like this:

To this:

(the font is Kreon)

Consider that when you are not putting that property, -webkit-backface-visibility: visible; is inherit

But be careful, that practice will not give always good results, if you see carefully, Chrome just make the text look a little bit blurry.

Another interesting fact:

-webkit-backface-visibility: hidden; will works too when you transform a text in Chrome (with the -webkit-transform property, that includes rotations, skews, etc)

Without -webkit-backface-visibility: hidden;

With -webkit-backface-visibility: hidden;

Well, I don't know why that practices works, but it does for me. Sorry for my weird english.

Just remove the event before adding it :

document.getElementById('link2').removeEventListener('click', linkclick, false);
document.getElementById('link2').addEventListener('click', linkclick, false);

SCP Commend

Send File from Local To Remote Server

sudo scp -i ../Downloads/new_bb_key.pem ./dump.zip [email protected]:~/.

Send File from Remote Server To Local

sudo scp -i ~/Downloads/new_bb_key.pem [email protected]:/home/ubuntu/LatestDBdump.zip Downloads/

What is your project type? If it's a "Win32 project", your entry point should be (w)WinMain. If it's a "Win32 Console Project", then it should be (w)main. The name _tmain is #defined to be either main or wmain depending on whether UNICODE is defined or not.

If it's a DLL, then DllMain.

The project type can be seen under project properties, Linker, System, Subsystem. It would say either "Console" or "Windows".

Note that the entry point name varies depending on whether UNICODE is defined or not. In VS2008, it's defined by default.

The proper prototype for main is either

int _tmain(int argc, _TCHAR* argv[])

or

int _tmain()

Make sure it's one of those.

EDIT:

If you're getting an error on _TCHAR, place an

#include <tchar.h>

If you think the issue is with one of the headers, go to the properties of the file with main(), and under Preprocessor, enable generating of the preprocessed file. Then compile. You'll get a file with the same name a .i extension. Open it, and see if anything unsavory happened to the main() function. There can be rogue #defines in theory...

EDIT2:

With UNICODE defined (which is the default), the linker expects the entry point to be wmain(), not main(). _tmain has the advantage of being UNICODE-agnostic - it translates to either main or wmain.

Some time ago, there was a reason to maintain both an ANSI build and a Unicode build. Unicode support was sorely incomplete in Windows 95/98/Me. The primary APIs were ANSI, and Unicode versions existed here and there, but not pervasively. Also, the VS debugger had trouble displaying Unicode strings. In the NT kernel OSes (that's Windows 2000/XP/Vista/7/8/10), Unicode support is primary, and ANSI functions are added on top. So ever since VS2005, the default upon project creation is Unicode. That means - wmain. They could not keep the same entry point name because the parameter types are different. _TCHAR is #defined to be either char or wchar_t. So _tmain is either main(int argc, char **argv) or wmain(int argc, wchar_t **argv).

The reason you were getting an error at _tmain at some point was probably because you did not change the type of argv to _TCHAR**.

If you're not planning to ever support ANSI (probably not), you can reformulate your entry point as

int wmain(int argc, wchar_t *argv[])

and remove the tchar.h include line.

The answer already posted will work. If you want to use the jQuery :not you can do this:

if ($(this).is(':not(:checked)'))

or

if ($(this).attr('checked') == false)

Try this:

jQuery('body').after('<a id="Download" target="_blank">Click Here</a>');

var canvas = document.getElementById('canvasID');
var ctx = canvas.getContext('2d');

document.getElementById('Download').addEventListener('click', function() {
    downloadCanvas(this, 'canvas', 'test.png');
}, false);

function downloadCanvas(link, canvasId, filename) {
    link.href = document.getElementById(canvasId).toDataURL();
    link.Download = filename;
}

You can just put this code in console in firefox or chrom and after changed your canvas tag ID in this above script and run this script in console.

After the execute this code you will see the link as text "click here" at bottom of the html page. click on this link and open the canvas drawing as a PNG image in new window save the image.

Well, duh :) SWT uses JNI ... and JNI is strictly platform specific.

Use 32-bit libraries with a 32-bit JVM, 64-bit libraries with a 64-bit JVM, make sure the versions match exactly, and don't mix'n'match.

IMHO...

PS: You can have multiple JVMs and/or multiple Eclipse's co-existing on the same box.

You can't directly call a function in another shell script.

You can move your function definitions into a separate file and then load them into your script using the . command, like this:

. /path/to/functions.sh

This will interpret functions.sh as if it's content were actually present in your file at this point. This is a common mechanism for implementing shared libraries of shell functions.

here is another solution...

System.IO.Stream st = new System.IO.StreamReader (picturePath).BaseStream;
byte[] buffer = new byte[4096];

System.IO.MemoryStream m = new System.IO.MemoryStream ();
while (st.Read (buffer,0,buffer.Length) > 0) {
    m.Write (buffer, 0, buffer.Length);
}  
imgView.Tag = m.ToArray ();
st.Close ();
m.Close ();

hope it helps!

1.Purposes of using a fragment?

• Ans:
  1. Dealing with device form-factor differences.
  2. Passing information between app screens.
  3. User interface organization.
  4. Advanced UI metaphors.

And if you want these translation units to share this variable, define int k; in A.cpp and put extern int k; in B.cpp.

for me, it didn't work without specifying the MIME in web.config, under <system.webServer><staticContent>

<mimeMap fileExtension=".ico" mimeType="image/ico" />

Just spent a couple of hours to find that the issue was my main file had extension .c instead of .cpp

:/

Use OnCommand event of imagebutton. Within it do

<asp:Button id="Button1" Text="Click" CommandName="Something" CommandArgument="your command arg" OnCommand="CommandBtn_Click" runat="server"/>

Code-behind:

void CommandBtn_Click(Object sender, CommandEventArgs e) 
{    
    switch(e.CommandName)
    {
        case "Something":
            // Do your code
            break;
        default:              
            break; 

    }
}

Yes using Option Explicit is a good habit. Using .Select however is not :) it reduces the speed of the code. Also fully justify sheet names else the code will always run for the Activesheet which might not be what you actually wanted.

Is this what you are trying?

Option Explicit

Sub Sample()
    Dim lastRow As Long, i As Long
    Dim CopyRange As Range

    '~~> Change Sheet1 to relevant sheet name
    With Sheets("Sheet1")
        lastRow = .Range("A" & .Rows.Count).End(xlUp).Row

        For i = 2 To lastRow
            If Len(Trim(.Range("A" & i).Value)) <> 0 Then
                If CopyRange Is Nothing Then
                    Set CopyRange = .Rows(i)
                Else
                    Set CopyRange = Union(CopyRange, .Rows(i))
                End If
            Else
                Exit For
            End If
        Next

        If Not CopyRange Is Nothing Then
            '~~> Change Sheet2 to relevant sheet name
            CopyRange.Copy Sheets("Sheet2").Rows(1)
        End If
    End With
End Sub

NOTE

If if you have data from Row 2 till Row 10 and row 11 is blank and then you have data again from Row 12 then the above code will only copy data from Row 2 till Row 10

If you want to copy all rows which have data then use this code.

Option Explicit

Sub Sample()
    Dim lastRow As Long, i As Long
    Dim CopyRange As Range

    '~~> Change Sheet1 to relevant sheet name
    With Sheets("Sheet1")
        lastRow = .Range("A" & .Rows.Count).End(xlUp).Row

        For i = 2 To lastRow
            If Len(Trim(.Range("A" & i).Value)) <> 0 Then
                If CopyRange Is Nothing Then
                    Set CopyRange = .Rows(i)
                Else
                    Set CopyRange = Union(CopyRange, .Rows(i))
                End If
            End If
        Next

        If Not CopyRange Is Nothing Then
            '~~> Change Sheet2 to relevant sheet name
            CopyRange.Copy Sheets("Sheet2").Rows(1)
        End If
    End With
End Sub

Hope this is what you wanted?

Sid

Actually I think using plain slices is the best solution in this case:

for i in range(0, len(data), 100):
    chunk = data[i:i + 100]
    ...

If you want to avoid copying the slices, you could use itertools.islice(), but it doesn't seem to be necessary here.

The itertools() documentation also contains the famous "grouper" pattern:

def grouper(n, iterable, fillvalue=None):
    "grouper(3, 'ABCDEFG', 'x') --> ABC DEF Gxx"
    args = [iter(iterable)] * n
    return izip_longest(fillvalue=fillvalue, *args)

You would need to modify it to treat the last chunk correctly, so I think the straight-forward solution using plain slices is preferable.

Having done some more digging, I think my issue is something to do with the type of library I am building gtest into. When building gtest with CMake, if BUILD_SHARED_LIBS is un-checked, and I link my program against these .lib files I get the errors mentioned above. However, if BUILD_SHARED_LIBS is checked then I produce a set of .lib and .dll files. When now linking against these .lib files the program compiles, but when run complains that it can't find gtest.dll.

That is because you have to add -DGTEST_LINKED_AS_SHARED_LIBRARY=1 to compiler definitions in your project if you want to use gtest as a shared library.

You could also use the static libraries, provided you compiled it with gtest_force_shared_crt option on to eliminate errors you have seen.

I like the library but adding it to the project is a real pain. And you have no chance to do it right unless you dig (and hack) into the gtest cmake files. Shame. In particular I do not like the idea of adding gtest as a source. :)

I ran into the same situation where when I copied the formula to another cell the formula was still referencing the cell used in the first formula. To correct this when you set up the rules, select the option "use a formula to determine which cells to format. Then type in the box your formula, for example H23*.25. When you copy the cells down the formulas will change to H24*.25, H25*.25 and so on. Hope this helps.

null is a legal value (and reserved word) in JSON, but some environments do not have a "NULL" object (as opposed to a NULL value) and hence cannot accurately represent the JSON null. So they will sometimes represent it as an empty array.

Whether null is a legal value in that particular element of that particular API is entirely up to the API designer.

Try setting: "AllowOverride All".

You can escape (this is how this principle is called) the double quotes by prefixing them with another double quote. You can put them in a string as follows:

Dim MyVar as string = "some text ""hello"" "

This will give the MyVar variable a value of some text "hello".

If you would like to purposely link your project A in Release against another project B in Debug, say to keep the overall performance benefits of your application while debugging, then you will likely hit this error. You can fix this by temporarily modifying the preprocessor flags of project B to disable iterator debugging (and make it match project A):

In Project B's "Debug" properties, Configuration Properties -> C/C++ -> Preprocessor, add the following to Preprocessor Definitions:

_HAS_ITERATOR_DEBUGGING=0;_ITERATOR_DEBUG_LEVEL=0;

Rebuild project B in Debug, then build project A in Release and it should link correctly.

In my particular case, this error error was happening because the file which I've added wasn't referenced at .vcproj file.

I had the same problem once. Calling invalidate after changing visibility almost always works, but in some cases it doesn't. I had to cheat and set the background to a transparent image and set the text to "".

The problem you'll face is that there's two types of PEM formatted keys: PKCS8 and SSLeay. It doesn't help that OpenSSL seems to use both depending on the command:

The usual openssl genrsa command will generate a SSLeay format PEM. An export from an PKCS12 file with openssl pkcs12 -in file.p12 will create a PKCS8 file.

The latter PKCS8 format can be opened natively in Java using PKCS8EncodedKeySpec. SSLeay formatted keys, on the other hand, can not be opened natively.

To open SSLeay private keys, you can either use BouncyCastle provider as many have done before or Not-Yet-Commons-SSL have borrowed a minimal amount of necessary code from BouncyCastle to support parsing PKCS8 and SSLeay keys in PEM and DER format: http://juliusdavies.ca/commons-ssl/pkcs8.html. (I'm not sure if Not-Yet-Commons-SSL will be FIPS compliant)

Key Format Identification

By inference from the OpenSSL man pages, key headers for two formats are as follows:

PKCS8 Format

Non-encrypted: -----BEGIN PRIVATE KEY-----
Encrypted: -----BEGIN ENCRYPTED PRIVATE KEY-----

SSLeay Format

-----BEGIN RSA PRIVATE KEY-----

(These seem to be in contradiction to other answers but I've tested OpenSSL's output using PKCS8EncodedKeySpec. Only PKCS8 keys, showing ----BEGIN PRIVATE KEY----- work natively)

check this out A little framework: a complete cookies reader/writer with full Unicode support

/*\
|*|
|*|  :: cookies.js ::
|*|
|*|  A complete cookies reader/writer framework with full unicode support.
|*|
|*|  Revision #1 - September 4, 2014
|*|
|*|  https://developer.mozilla.org/en-US/docs/Web/API/document.cookie
|*|  https://developer.mozilla.org/User:fusionchess
|*|  https://github.com/madmurphy/cookies.js
|*|
|*|  This framework is released under the GNU Public License, version 3 or later.
|*|  http://www.gnu.org/licenses/gpl-3.0-standalone.html
|*|
|*|  Syntaxes:
|*|
|*|  * docCookies.setItem(name, value[, end[, path[, domain[, secure]]]])
|*|  * docCookies.getItem(name)
|*|  * docCookies.removeItem(name[, path[, domain]])
|*|  * docCookies.hasItem(name)
|*|  * docCookies.keys()
|*|
\*/

var docCookies = {
  getItem: function (sKey) {
    if (!sKey) { return null; }
    return decodeURIComponent(document.cookie.replace(new RegExp("(?:(?:^|.*;)\\s*" + encodeURIComponent(sKey).replace(/[\-\.\+\*]/g, "\\$&") + "\\s*\\=\\s*([^;]*).*$)|^.*$"), "$1")) || null;
  },
  setItem: function (sKey, sValue, vEnd, sPath, sDomain, bSecure) {
    if (!sKey || /^(?:expires|max\-age|path|domain|secure)$/i.test(sKey)) { return false; }
    var sExpires = "";
    if (vEnd) {
      switch (vEnd.constructor) {
        case Number:
          sExpires = vEnd === Infinity ? "; expires=Fri, 31 Dec 9999 23:59:59 GMT" : "; max-age=" + vEnd;
          break;
        case String:
          sExpires = "; expires=" + vEnd;
          break;
        case Date:
          sExpires = "; expires=" + vEnd.toUTCString();
          break;
      }
    }
    document.cookie = encodeURIComponent(sKey) + "=" + encodeURIComponent(sValue) + sExpires + (sDomain ? "; domain=" + sDomain : "") + (sPath ? "; path=" + sPath : "") + (bSecure ? "; secure" : "");
    return true;
  },
  removeItem: function (sKey, sPath, sDomain) {
    if (!this.hasItem(sKey)) { return false; }
    document.cookie = encodeURIComponent(sKey) + "=; expires=Thu, 01 Jan 1970 00:00:00 GMT" + (sDomain ? "; domain=" + sDomain : "") + (sPath ? "; path=" + sPath : "");
    return true;
  },
  hasItem: function (sKey) {
    if (!sKey) { return false; }
    return (new RegExp("(?:^|;\\s*)" + encodeURIComponent(sKey).replace(/[\-\.\+\*]/g, "\\$&") + "\\s*\\=")).test(document.cookie);
  },
  keys: function () {
    var aKeys = document.cookie.replace(/((?:^|\s*;)[^\=]+)(?=;|$)|^\s*|\s*(?:\=[^;]*)?(?:\1|$)/g, "").split(/\s*(?:\=[^;]*)?;\s*/);
    for (var nLen = aKeys.length, nIdx = 0; nIdx < nLen; nIdx++) { aKeys[nIdx] = decodeURIComponent(aKeys[nIdx]); }
    return aKeys;
  }
};

it should. Typically that's how you do multiple selectors. Otherwise it may not like you trying to assign the return values of three uploads to the same var.

I would suggest using .each or maybe push the returns to an array rather than assigning them to that value.

Arrays are normally accessed via numeric indexes, so in your example arr[0] == {name:"k1", value:"abc"}. If you know that the name property of each object will be unique you can store them in an object instead of an array, as follows:

var obj = {};
obj["k1"] = "abc";
obj["k2"] = "hi";
obj["k3"] = "oa";

alert(obj["k2"]); // displays "hi"

If you actually want an array of objects like in your post you can loop through the array and return when you find an element with an object having the property you want:

function findElement(arr, propName, propValue) {
  for (var i=0; i < arr.length; i++)
    if (arr[i][propName] == propValue)
      return arr[i];

  // will return undefined if not found; you could return a default instead
}

// Using the array from the question
var x = findElement(arr, "name", "k2"); // x is {"name":"k2", "value":"hi"}
alert(x["value"]); // displays "hi"

var y = findElement(arr, "name", "k9"); // y is undefined
alert(y["value"]); // error because y is undefined

alert(findElement(arr, "name", "k2")["value"]); // displays "hi";

alert(findElement(arr, "name", "zzz")["value"]); // gives an error because the function returned undefined which won't have a "value" property

If you actually want to use _tWinMain() instead of main() make sure your project relevant configuration have

1. Linker-> System -> SubSystem => Windows(/SUBSYSTEM:WINDOWS)
2. C/C++ -> Preprocessor -> Preprocessor Definitions => Replace _CONSOLE with _WINDOWS

3. In the c/cpp file where _tWinMain() is defined, add:

   #include <Windows.h> #include <tchar.h>

Wrapping the existing formula in IFERROR will not achieve:

the average of cells that contain non-zero, non-blank values.

I suggest trying:

=if(ArrayFormula(isnumber(K23:M23)),AVERAGEIF(K23:M23,"<>0"),"")

This is what I did for bulk update:

UPDATE tableName SET isDeleted = 1 where columnName in ('430903GW4j683537882','430903GW4j667075431','430903GW4j658444015')

"How to find all a which are children of <li class=test> but not any others?"

Given the HTML below (I added another <a> to show te difference between select and select_one):

<div>
  <li class="test">
    <a>link1</a>
    <ul>
      <li>
        <a>link2</a>
      </li>
    </ul>
    <a>link3</a>
  </li>
</div>

The solution is to use child combinator (>) that is placed between two CSS selectors:

>>> soup.select('li.test > a')
[<a>link1</a>, <a>link3</a>]

In case you want to find only the first child:

>>> soup.select_one('li.test > a')
<a>link1</a>

Use the print function (Python 3.x) or import it (Python 2.6+):

from __future__ import print_function

print(*sys.path, sep='\n')

You must put your mathematical expressions inside $(( )).

One-liner:

for i in {1..600}; do wget http://example.com/search/link$(($i % 5)); done;

Multiple lines:

for i in {1..600}; do
    wget http://example.com/search/link$(($i % 5))
done

Use this easy method

  $a='Link1';
  $b='Link2';
  echo "<a href=\"pass.php?link=$a\">Link 1</a>";
  echo '<br/>';
  echo "<a href=\"pass.php?link=$b\">Link 2</a>";

Apparently, you did it right. But here is a list of things you'll need with examples from a working application:

1) A context.xml file in META-INF, specifying your data source:

<Context>
    <Resource 
        name="jdbc/DsWebAppDB" 
        auth="Container" 
        type="javax.sql.DataSource" 
        username="sa" 
        password="" 
        driverClassName="org.h2.Driver" 
        url="jdbc:h2:mem:target/test/db/h2/hibernate" 
        maxActive="8" 
        maxIdle="4"/>
</Context>

2) web.xml which tells the container that you are using this resource:

<resource-env-ref>
    <resource-env-ref-name>jdbc/DsWebAppDB</resource-env-ref-name>
    <resource-env-ref-type>javax.sql.DataSource</resource-env-ref-type>
</resource-env-ref>

3) Hibernate configuration which consumes the data source. In this case, it's a persistence.xml, but it's similar in hibernate.cfg.xml

<persistence-unit name="dswebapp">
    <provider>org.hibernate.ejb.HibernatePersistence</provider>
    <properties>
        <property name="hibernate.dialect" value="org.hibernate.dialect.H2Dialect" />
        <property name="hibernate.connection.datasource" value="java:comp/env/jdbc/DsWebAppDB"/>
    </properties>
</persistence-unit>

The issue for me was that DocumentFormat.OpenXml.dll existed in the Global Assembly Cache (GAC) on my Win7 development box. So when publishing my project in VS2013, it found the file in the GAC and therefore omitted it from being copied to the publish folder.

Solution: remove the DLL from the GAC.

1. Open the GAC root in Windows Explorer (Win7: %windir%\Microsoft.NET\assembly)
2. Search for OpenXml
3. Delete any appropriate folders (or to be safe, cut them out to your desktop in case you should want to restore them)

There may be a more proper way to remove a GAC file (below), but that is what I did and it worked. gacutil –u DocumentFormat.OpenXml.dll

Hope that helps!

They serve the actual image inside CSS so there will be less HTTP requests per page.

If method 1 has to be executed after method 2, 3, 4. The following code snippet can be the solution for this using Deferred object in JavaScript.

function method1(){_x000D_
  var dfd = new $.Deferred();_x000D_
     setTimeout(function(){_x000D_
     console.log("Inside Method - 1"); _x000D_
     method2(dfd);  _x000D_
    }, 5000);_x000D_
  return dfd.promise();_x000D_
}_x000D_
_x000D_
function method2(dfd){_x000D_
  setTimeout(function(){_x000D_
   console.log("Inside Method - 2"); _x000D_
   method3(dfd); _x000D_
  }, 3000);_x000D_
}_x000D_
_x000D_
function method3(dfd){_x000D_
  setTimeout(function(){_x000D_
   console.log("Inside Method - 3");  _x000D_
   dfd.resolve();_x000D_
  }, 3000);_x000D_
}_x000D_
_x000D_
function method4(){   _x000D_
   console.log("Inside Method - 4");  _x000D_
}_x000D_
_x000D_
var call = method1();_x000D_
_x000D_
$.when(call).then(function(cb){_x000D_
  method4();_x000D_
});

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>

1. Insert a column left to the column in question(adding column A beside column B).
2. Provide the value you want to append in 1st cell of column A
3. Insert a column right to the column in question ( column C)
4. Add this formula -> =CONCATENATE("A1","B1")
5. Drag it down to apply to all values in column
6. You will find concatenated values in column C

This worked for me !

Because the compiler needs to see them in order to inline them. And headers files are the "components" which are commonly included in other translation units.

#include "file.h"
// Ok, now me (the compiler) can see the definition of that inline function. 
// So I'm able to replace calls for the actual implementation.

Looking at their docs, they have a $.uniform.update feature to refresh a "uniformed" element.

Example: http://jsfiddle.net/r87NH/4/

$("input:checkbox").uniform();

$("body").on("click", "#check1", function () {
    var two = $("#check2").attr("checked", this.checked);
    $.uniform.update(two);
});

For new comers,

matplotlib.pyplot.switch_backend(newbackend)

You could use a simple array intersection, this way you can know what differs in each hash.

    hash1 = { a: 1 , b: 2 }
    hash2 = { a: 2 , b: 2 }

    overlapping_elements = hash1.to_a & hash2.to_a

    exclusive_elements_from_hash1 = hash1.to_a - overlapping_elements
    exclusive_elements_from_hash2 = hash2.to_a - overlapping_elements

Setting the active menu, they have the many ways to do that. Now, I share you a way to set active menu by CSS.

    <a href="index.php?id=home">Home</a>
    <a href="index.php?id=news">News</a>
    <a href="index.php?id=about">About</a>

Now, you only set $_request["id"] == "home" thì echo "class='active'" , then we can do same with others.

<a href="index.php?id=home" <?php if($_REQUEST["id"]=="home"){echo "class='active'";}?>>Home</a>
<a href="index.php?id=news" <?php if($_REQUEST["id"]=="news"){echo "class='active'";}?>>News</a>
<a href="index.php?id=about" <?php if($_REQUEST["id"]=="about"){echo "class='active'";}?>>About</a>

I think it is useful with you.

go to "Project-Properties-Configuration Properties-Linker-input-Additional dependencies" then go to the end and type ";ws2_32.lib".

I think I got it at last by doing some manual transformations with the data before visualization:

d <- diamonds
# computing logarithm of prices
d$price <- log10(d$price)

And work out a formatter to later compute 'back' the logarithmic data:

formatBack <- function(x) 10^x 
# or with special formatter (here: "dollar")
formatBack <- function(x) paste(round(10^x, 2), "$", sep=' ') 

And draw the plot with given formatter:

m <- ggplot(d, aes(y = price, x = color))
m + geom_boxplot() + scale_y_continuous(formatter='formatBack')

Sorry to the community to bother you with a question I could have solved before! The funny part is: I was working hard to make this plot work a month ago but did not succeed. After asking here, I got it.

Anyway, thanks to @DWin for motivation!

An optional prefix ! which negates the pattern; any matching file excluded by a previous pattern will become included again. If a negated pattern matches, this will override lower precedence patterns sources.

http://schacon.github.com/git/gitignore.html

*.json
!spec/*.json

With a = subprocess.Popen("cdrecord --help",stdout = subprocess.PIPE) , you need to either use a list or use shell=True;

Either of these will work. The former is preferable.

a = subprocess.Popen(['cdrecord', '--help'], stdout=subprocess.PIPE)

a = subprocess.Popen('cdrecord --help', shell=True, stdout=subprocess.PIPE)

Also, instead of using Popen.stdout.read/Popen.stderr.read, you should use .communicate() (refer to the subprocess documentation for why).

proc = subprocess.Popen(['cdrecord', '--help'], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
stdout, stderr = proc.communicate()

Change the vm value in eclipse.ini file with the correct path to your JDK something like this,

-vm /Library/Java/JavaVirtualMachines/jdk-11.0.5.jdk/Contents/Home/bin

Path to eclipse.ini looks to me something like this,

/Users/tomcat/eclipse/jee-2018-09/Eclipse.app/Contents/Eclipse

Checkboxes are a control type designed for one purpose: to ensure valid entry of Boolean values.

In Access, there are two types:

1. 2-state -- can be checked or unchecked, but not Null. Values are True (checked) or False (unchecked). In Access and VBA, the value of True is -1 and the value of False is 0. For portability with environments that use 1 for True, you can always test for False or Not False, since False is the value 0 for all environments I know of.

2. 3-state -- like the 2-state, but can be Null. Clicking it cycles through True/False/Null. This is for binding to an integer field that allows Nulls. It is of no use with a Boolean field, since it can never be Null.

Minor quibble with the answers:

There is almost never a need to use the .Value property of an Access control, as it's the default property. These two are equivalent:

  ?Me!MyCheckBox.Value
  ?Me!MyCheckBox

The only gotcha here is that it's important to be careful that you don't create implicit references when testing the value of a checkbox. Instead of this:

  If Me!MyCheckBox Then

...write one of these options:

  If (Me!MyCheckBox) Then  ' forces evaluation of the control

  If Me!MyCheckBox = True Then

  If (Me!MyCheckBox = True) Then

  If (Me!MyCheckBox = Not False) Then

Likewise, when writing subroutines or functions that get values from a Boolean control, always declare your Boolean parameters as ByVal unless you actually want to manipulate the control. In that case, your parameter's data type should be an Access control and not a Boolean value. Anything else runs the risk of implicit references.

Last of all, if you set the value of a checkbox in code, you can actually set it to any number, not just 0 and -1, but any number other than 0 is treated as True (because it's Not False). While you might use that kind of thing in an HTML form, it's not proper UI design for an Access app, as there's no way for the user to be able to see what value is actually be stored in the control, which defeats the purpose of choosing it for editing your data.

Your local port 443 / 8181 / 3820 is used.

If you are on linux/unix:

• use netstat -an and lsof -n to check who is using this port

If you are on windows

• use netstat -an and tcpview to check.

You need to use an ObjectMapper:

ObjectMapper mapper = new ObjectMapper();
JsonFactory factory = mapper.getJsonFactory(); // since 2.1 use mapper.getFactory() instead
JsonParser jp = factory.createJsonParser("{\"k1\":\"v1\"}");
JsonNode actualObj = mapper.readTree(jp);

Further documentation about creating parsers can be found here.

import base64
coded_string = '''Q5YACgA...'''
base64.b64decode(coded_string)

worked for me. At the risk of pasting an offensively-long result, I got:

>>> base64.b64decode(coded_string)
2: 'C\x96\x00\n\x00\x00\x00\x00C\x96\x00\x1b\x00\x00\x00\x00C\x96\x00-\x00\x00\x00\x00C\x96\x00?\x00\x00\x00\x00C\x96\x07M\x00\x00\x00\x00C\x96\x07_\x00\x00\x00\x00C\x96\x07p\x00\x00\x00\x00C\x96\x07\x82\x00\x00\x00\x00C\x96\x07\x94\x00\x00\x00\x00C\x96\x07\xa6Cq\xf0\x7fC\x96\x07\xb8DJ\x81\xc7C\x96\x07\xcaD\xa5\x9dtC\x96\x07\xdcD\xb6\x97\x11C\x96\x07\xeeD\x8b\x8flC\x96\x07\xffD\x03\xd4\xaaC\x96\x08\x11B\x05&\xdcC\x96\x08#\x00\x00\x00\x00C\x96\x085C\x0c\xc9\xb7C\x96\x08GCy\xc0\xebC\x96\x08YC\x81\xa4xC\x96\x08kC\x0f@\x9bC\x96\x08}\x00\x00\x00\x00C\x96\x08\x8e\x00\x00\x00\x00C\x96\x08\xa0\x00\x00\x00\x00C\x96\x08\xb2\x00\x00\x00\x00C\x96\x86\xf9\x00\x00\x00\x00C\x96\x87\x0b\x00\x00\x00\x00C\x96\x87\x1d\x00\x00\x00\x00C\x96\x87/\x00\x00\x00\x00C\x96\x87AA\x0b\xe7PC\x96\x87SCI\xf5gC\x96\x87eC\xd4J\xeaC\x96\x87wD\r\x17EC\x96\x87\x89D\x00F6C\x96\x87\x9bC\x9cg\xdeC\x96\x87\xadB\xd56\x0cC\x96\x87\xbf\x00\x00\x00\x00C\x96\x87\xd1\x00\x00\x00\x00C\x96\x87\xe3\x00\x00\x00\x00C\x96\x87\xf5\x00\x00\x00\x00C\x9cY}\x00\x00\x00\x00C\x9cY\x90\x00\x00\x00\x00C\x9cY\xa4\x00\x00\x00\x00C\x9cY\xb7\x00\x00\x00\x00C\x9cY\xcbC\x1f\xbd\xa3C\x9cY\xdeCCz{C\x9cY\xf1CD\x02\xa7C\x9cZ\x05C+\x9d\x97C\x9cZ\x18C\x03R\xe3C\x9cZ,\x00\x00\x00\x00C\x9cZ?
[stuff omitted as it exceeded SO's body length limits]
\xbb\x00\x00\x00\x00D\xc5!7\x00\x00\x00\x00D\xc5!\xb2\x00\x00\x00\x00D\xc7\x14x\x00\x00\x00\x00D\xc7\x14\xf6\x00\x00\x00\x00D\xc7\x15t\x00\x00\x00\x00D\xc7\x15\xf2\x00\x00\x00\x00D\xc7\x16pC5\x9f\xf9D\xc7\x16\xeeC[\xb5\xf5D\xc7\x17lCG\x1b;D\xc7\x17\xeaB\xe3\x0b\xa6D\xc7\x18h\x00\x00\x00\x00D\xc7\x18\xe6\x00\x00\x00\x00D\xc7\x19d\x00\x00\x00\x00D\xc7\x19\xe2\x00\x00\x00\x00D\xc7\xfe\xb4\x00\x00\x00\x00D\xc7\xff3\x00\x00\x00\x00D\xc7\xff\xb2\x00\x00\x00\x00D\xc8\x001\x00\x00\x00\x00'

What problem are you having, specifically?

$('#myform :checkbox').change(function() {
    // this will contain a reference to the checkbox   
    if (this.checked) {
        // the checkbox is now checked 
    } else {
        // the checkbox is now no longer checked
    }
});

int *generate_randomnumbers(int start, int end){
    int *res = malloc(sizeof(int)*(end-start));
    srand(time(NULL));
    for (int i= 0; i < (end -start)+1; i++){
        int r = rand()%end + start;
        int dup = 0;
        for (int j = 0; j < (end -start)+1; j++){
            if (res[j] == r){
                i--;
                dup = 1;
                break;
            }
        }
        if (!dup)
            res[i] = r;
    }
    return res;
}

.block1 {_x000D_
    color: red;_x000D_
    width: 100px;_x000D_
    border: 1px solid green;_x000D_
    position: relative;_x000D_
}_x000D_
_x000D_
.block2 {_x000D_
    color: blue;_x000D_
    width: 70px;_x000D_
    border: 2px solid black;_x000D_
    position: absolute;_x000D_
    top: 0px;_x000D_
    right: 0px;_x000D_
}

<div class='block1'>_x000D_
  <p>text</p>_x000D_
  <p>text2</p>_x000D_
  <div class='block2'>block2</div>_x000D_
</div>

Should do it. Assuming you don't need it to flow.

Some readers will have another issue and need this fix. read the links below. the same problem occured with visual studio 2015 with the advent of windows sdk 10 which brings up libucrt. ucrt is the windows implementation of C Runtime (CRT) aka the posix runtime library. You most likely have code that was ported from unix... Welcome to the drawback

https://support.microsoft.com/en-us/help/148652/a-lnk2005-error-occurs-when-the-crt-library-and-mfc-libraries-are-linked-in-the-wrong-order-in-visual-c

https://github.com/lordmulder/libsndfile-MSVC/blob/master/src/sf_unistd.h

https://lists.gnu.org/archive/html/bug-gnulib/2011-09/msg00224.html

https://msdn.microsoft.com/en-us/library/y23kc048.aspx

https://blogs.msdn.microsoft.com/vcblog/2015/03/03/introducing-the-universal-crt/

If you are only using the isocalendar week number across the board the following should be sufficient:

import datetime
week = date(year=2014, month=1, day=1).isocalendar()[1]

This retrieves the second member of the tuple returned by isocalendar for our week number.

However, if you are going to be using date functions that deal in the Gregorian calendar, isocalendar alone will not work! Take the following example:

import datetime
date = datetime.datetime.strptime("2014-1-1", "%Y-%W-%w")
week = date.isocalendar()[1]

The string here says to return the Monday of the first week in 2014 as our date. When we use isocalendar to retrieve the week number here, we would expect to get the same week number back, but we don't. Instead we get a week number of 2. Why?

Week 1 in the Gregorian calendar is the first week containing a Monday. Week 1 in the isocalendar is the first week containing a Thursday. The partial week at the beginning of 2014 contains a Thursday, so this is week 1 by the isocalendar, and making date week 2.

If we want to get the Gregorian week, we will need to convert from the isocalendar to the Gregorian. Here is a simple function that does the trick.

import datetime

def gregorian_week(date):
    # The isocalendar week for this date
    iso_week = date.isocalendar()[1]

    # The baseline Gregorian date for the beginning of our date's year
    base_greg = datetime.datetime.strptime('%d-1-1' % date.year, "%Y-%W-%w")

    # If the isocalendar week for this date is not 1, we need to 
    # decrement the iso_week by 1 to get the Gregorian week number
    return iso_week if base_greg.isocalendar()[1] == 1 else iso_week - 1

Why not create a class Book with properties: Number, Title, and Price. Then store them in a single dimensional array? That way instead of calling

Book[i][j] 

..to get your books title, call

Book[i].Title

Seems to me like it would be a bit more manageable and code friendly.

$.extend($.expr[':'], {
        unchecked: function (obj) {
            return ((obj.type == 'checkbox' || obj.type == 'radio') && !$(obj).is(':checked'));
        }
    });

$("input:checked")
$("input:unchecked")

To consider multiple column.

Sort and give unique list based on column 1 and column 3:

sort -u -t : -k 1,1 -k 3,3 test.txt

• -t : colon is separator
• -k 1,1 -k 3,3 based on column 1 and column 3

I know this is old but I got a kind of working solution

SELECT Tbla.* FROM Tbla
INNER JOIN Tblb ON
Tblb.col1 Like '%'+Tbla.Col2+'%'

You can expand it further with your where clause etc. I only answered this because this is what I was looking for and I had to figure out a way of doing it.

Oh - the ugliness of Windows... Order of includes are important here. You need to include winsock2.h before windows.h. Since windows.h is probably included from your precompiled header (stdafx.h), you will need to include winsock2.h from there:

#include <winsock2.h>
#include <windows.h>

Proposal, as suggested by some answerers:

public interface IDualMap<K1, K2, V> {

    /**
    * @return Unmodifiable version of underlying map1
    */
    Map<K1, V> getMap1();

    /**
    * @return Unmodifiable version of underlying map2
    */
    Map<K2, V> getMap2();

    void put(K1 key1, K2 key2, V value);

}

public final class DualMap<K1, K2, V>
        implements IDualMap<K1, K2, V> {

    private final Map<K1, V> map1 = new HashMap<K1, V>();

    private final Map<K2, V> map2 = new HashMap<K2, V>();

    @Override
    public Map<K1, V> getMap1() {
        return Collections.unmodifiableMap(map1);
    }

    @Override
    public Map<K2, V> getMap2() {
        return Collections.unmodifiableMap(map2);
    }

    @Override
    public void put(K1 key1, K2 key2, V value) {
        map1.put(key1, value);
        map2.put(key2, value);
    }
}

The following VBA code should get you started. It will copy all of the data in the original workbook to a new workbook, but it will have added 1 to each value, and all blank cells will have been ignored.

Option Explicit

Public Sub exportDataToNewBook()
    Dim rowIndex As Integer
    Dim colIndex As Integer
    Dim dataRange As Range
    Dim thisBook As Workbook
    Dim newBook As Workbook
    Dim newRow As Integer
    Dim temp

    '// set your data range here
    Set dataRange = Sheet1.Range("A1:B100")

    '// create a new workbook
    Set newBook = Excel.Workbooks.Add

    '// loop through the data in book1, one column at a time
    For colIndex = 1 To dataRange.Columns.Count
        newRow = 0
        For rowIndex = 1 To dataRange.Rows.Count
            With dataRange.Cells(rowIndex, colIndex)

            '// ignore empty cells
            If .value <> "" Then
                newRow = newRow + 1
                temp = doSomethingWith(.value)
                newBook.ActiveSheet.Cells(newRow, colIndex).value = temp
                End If

            End With
        Next rowIndex
    Next colIndex
End Sub

Private Function doSomethingWith(aValue)

    '// This is where you would compute a different value
    '// for use in the new workbook
    '// In this example, I simply add one to it.
    aValue = aValue + 1

    doSomethingWith = aValue
End Function

The method that you want to run must be a ThreadStart Delegate. Please consult the Thread documentation on MSDN. Note that you can sort of create your two-parameter start with a closure. Something like:

var t = new Thread(() => Startup(port, path));

Note that you may want to revisit your method accessibility. If I saw a class starting a thread on its own public method in this manner, I'd be a little surprised.

may need to change the SCHEMA not only table

ALTER SCHEMA `<database name>`  DEFAULT CHARACTER SET utf8mb4  DEFAULT COLLATE utf8mb4_unicode_ci (as Rich said - utf8mb4);

(mariaDB 10)

There are several other things you can do, such as selecting new fonts:

\documentclass[10pt,a4paper]{article}
% ... lots of packages e.g. babel, microtype, fontenc, inputenc &c.
\usepackage{color}    % Leave this out if you care about B/W printing, obviously.
\usepackage{upquote}  % Turns curly quotes in verbatim text into straight quotes. 
                      % People who have to copy/paste code from the PDF output 
                      % will love you for this. Or perhaps more accurately: 
                      % They will not hate you/hate you less.
\usepackage{beramono} % Or some other package that provides a fixed width font. q.v.
                      % http://www.tug.dk/FontCatalogue/typewriterfonts.html
\usepackage{listings} 
\lstset {                 % A rudimentary config that shows off some features.
    language=Java,
    basicstyle=\ttfamily, % Without beramono, we'd get cmtt, the teletype font.
    commentstyle=\textit, % cmtt doesn't do italics. It might do slanted text though.
    \keywordstyle=        % Nor does cmtt do bold text.
        \color{blue}\bfseries,
    \tabsize=4            % Or whatever you use in your editor, I suppose.
}
\begin{document} 
\begin{lstlisting}
public final int ourAnswer() { return 42; /* Our final answer */ }
\end{lstlisting} 
\end{document}

Here's an old discussion thread where I listed the main differences and the conditions in which you should use each of these methods. I think you may find it useful to go through the discussion.

To explain the differences as relevant to your posted example:

a. When you use RegisterStartupScript, it will render your script after all the elements in the page (right before the form's end tag). This enables the script to call or reference page elements without the possibility of it not finding them in the Page's DOM.

Here is the rendered source of the page when you invoke the RegisterStartupScript method:

<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1"><title></title></head>
<body>
    <form name="form1" method="post" action="StartupScript.aspx" id="form1">
        <div>
            <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="someViewstategibberish" />
        </div>
        <div> <span id="lblDisplayDate">Label</span>
            <br />
            <input type="submit" name="btnPostback" value="Register Startup Script" id="btnPostback" />
            <br />
            <input type="submit" name="btnPostBack2" value="Register" id="btnPostBack2" />
        </div>
        <div>
            <input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="someViewstategibberish" />
        </div>
        <!-- Note this part -->
        <script language='javascript'>
            var lbl = document.getElementById('lblDisplayDate');
            lbl.style.color = 'red';
        </script>
    </form>
    <!-- Note this part -->
</body>
</html>

b. When you use RegisterClientScriptBlock, the script is rendered right after the Viewstate tag, but before any of the page elements. Since this is a direct script (not a function that can be called, it will immediately be executed by the browser. But the browser does not find the label in the Page's DOM at this stage and hence you should receive an "Object not found" error.

Here is the rendered source of the page when you invoke the RegisterClientScriptBlock method:

<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1"><title></title></head>
<body>
    <form name="form1" method="post" action="StartupScript.aspx" id="form1">
        <div>
            <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="someViewstategibberish" />
        </div>
        <script language='javascript'>
            var lbl = document.getElementById('lblDisplayDate');
            // Error is thrown in the next line because lbl is null.
            lbl.style.color = 'green';

Therefore, to summarize, you should call the latter method if you intend to render a function definition. You can then render the call to that function using the former method (or add a client side attribute).

Edit after comments:

For instance, the following function would work:

protected void btnPostBack2_Click(object sender, EventArgs e) 
{ 
  System.Text.StringBuilder sb = new System.Text.StringBuilder(); 
  sb.Append("<script language='javascript'>function ChangeColor() {"); 
  sb.Append("var lbl = document.getElementById('lblDisplayDate');"); 
  sb.Append("lbl.style.color='green';"); 
  sb.Append("}</script>"); 

  //Render the function definition. 
  if (!ClientScript.IsClientScriptBlockRegistered("JSScriptBlock")) 
  {
    ClientScript.RegisterClientScriptBlock(this.GetType(), "JSScriptBlock", sb.ToString()); 
  }

  //Render the function invocation. 
  string funcCall = "<script language='javascript'>ChangeColor();</script>"; 

  if (!ClientScript.IsStartupScriptRegistered("JSScript"))
  { 
    ClientScript.RegisterStartupScript(this.GetType(), "JSScript", funcCall); 
  } 
} 

If you really want to micro optimise your code your best approach is always benchmarking.

The .net framework has an excellent stopwatch implementation - System.Diagnostics.Stopwatch

You are right. This is a badly documented issue. But you can change the font size parameter (by opposition to font scale) directly after building the plot. Check the following example:

import seaborn as sns
tips = sns.load_dataset("tips")

b = sns.boxplot(x=tips["total_bill"])
b.axes.set_title("Title",fontsize=50)
b.set_xlabel("X Label",fontsize=30)
b.set_ylabel("Y Label",fontsize=20)
b.tick_params(labelsize=5)
sns.plt.show()

, which results in this:

To make it consistent in between plots I think you just need to make sure the DPI is the same. By the way it' also a possibility to customize a bit the rc dictionaries since "font.size" parameter exists but I'm not too sure how to do that.

NOTE: And also I don't really understand why they changed the name of the font size variables for axis labels and ticks. Seems a bit un-intuitive.

There is no str accessor for datetimes and you can't do dates.astype(str) either, you can call apply and use datetime.strftime:

In [73]:

dates = pd.to_datetime(pd.Series(['20010101', '20010331']), format = '%Y%m%d')
dates.apply(lambda x: x.strftime('%Y-%m-%d'))
Out[73]:
0    2001-01-01
1    2001-03-31
dtype: object

You can change the format of your date strings using whatever you like: strftime() and strptime() Behavior.

Update

As of version 0.17.0 you can do this using dt.strftime

dates.dt.strftime('%Y-%m-%d')

will now work

What should I do to prepare my website for https. (Do I need to alter the code / Config)

You should keep best practices for secure coding in mind (here is a good intro: http://www.owasp.org/index.php/Secure_Coding_Principles ), otherwise all you need is a correctly set up SSL certificate.

Is SSL and https one and the same..

Pretty much, yes.

Do I need to apply with someone to get some license or something.

You can buy an SSL certificate from a certificate authority or use a self-signed certificate. The ones you can purchase vary wildly in price - from $10 to hundreds of dollars a year. You would need one of those if you set up an online shop, for example. Self-signed certificates are a viable option for an internal application. You can also use one of those for development. Here's a good tutorial on how to set up a self-signed certificate for IIS: Enabling SSL on IIS 7.0 Using Self-Signed Certificates

Do I need to make all my pages secured or only the login page..

Use HTTPS for everything, not just the initial user login. It's not going to be too much of an overhead and it will mean the data that the users send/receive from your remotely hosted application cannot be read by outside parties if it is intercepted. Even Gmail now turns on HTTPS by default.

As of now when pip has upgraded to 10 and now they have changed their path from pypi.python.org to files.pythonhosted.org Please update the command to pip --trusted-host files.pythonhosted.org install python_package

ActiveSheet.UsedRange.Rows.Count + ActiveSheet.UsedRange.Rows(1).Row -1

Short. Safe. Fast. Will return the last non-empty row even if there are blank lines on top of the sheet, or anywhere else. Works also for an empty sheet (Excel reports 1 used row on an empty sheet so the expression will be 1). Tested and working on Excel 2002 and Excel 2010.

Yes, continue will be ignored by the switch statement and will go to the condition of the loop to be tested. I'd like to share this extract from The C Programming Language reference by Ritchie:

The continue statement is related to break, but less often used; it causes the next iteration of the enclosing for, while, or do loop to begin. In the while and do, this means that the test part is executed immediately; in the for, control passes to the increment step.

The continue statement applies only to loops, not to a switch statement. A continue inside a switch inside a loop causes the next loop iteration.

I'm not sure about that for C++.

If you use Gradle Build Tool you can try my windows-service-plugin, which facilitates using of Apache Commons Daemon Procrun.

To create a java windows service application with the plugin you need to go through several simple steps.

1. Create a main service class with the appropriate method.

   public class MyService {
   
       public static void main(String[] args) {
           String command = "start";
           if (args.length > 0) {
               command = args[0];
           }
           if ("start".equals(command)) {
               // process service start function
           } else {
               // process service stop function
           }
       }
   
   }
   

2. Include the plugin into your build.gradle file.

   buildscript {
     repositories {
       maven {
         url "https://plugins.gradle.org/m2/"
       }
     }
     dependencies {
       classpath "gradle.plugin.com.github.alexeylisyutenko:windows-service-plugin:1.1.0"
     }
   }
   
   apply plugin: "com.github.alexeylisyutenko.windows-service-plugin"
   

   The same script snippet for new, incubating, plugin mechanism introduced in Gradle 2.1:

   plugins {
     id "com.github.alexeylisyutenko.windows-service-plugin" version "1.1.0"
   }
   

3. Configure the plugin.

   windowsService {
     architecture = 'amd64'
     displayName = 'TestService'
     description = 'Service generated with using gradle plugin'   
     startClass = 'MyService'
     startMethod = 'main'
     startParams = 'start'
     stopClass = 'MyService'
     stopMethod = 'main'
     stopParams = 'stop'
     startup = 'auto'
   }
   

4. Run createWindowsService gradle task to create a windows service distribution.

That's all you need to do to create a simple windows service. The plugin will automatically download Apache Commons Daemon Procrun binaries, extract this binaries to the service distribution directory and create batch files for installation/uninstallation of the service.

In ${project.buildDir}/windows-service directory you will find service executables, batch scripts for installation/uninstallation of the service and all runtime libraries. To install the service run <project-name>-install.bat and if you want to uninstall the service run <project-name>-uninstall.bat. To start and stop the service use <project-name>w.exe executable.

Note that the method handling service start should create and start a separate thread to carry out the processing, and then return. The main method is called from different threads when you start and stop the service.

For more information, please read about the plugin and Apache Commons Daemon Procrun.

sys.path returns the list of paths

ref

sys.path

A list of strings that specifies the search path for modules. Initialized from the environment variable PYTHONPATH, plus an installation-dependent default.

As initialized upon program startup, the first item of this list, path[0], is the directory containing the script that was used to invoke the Python interpreter. If the script directory is not available (e.g. if the interpreter is invoked interactively or if the script is read from standard input), path[0] is the empty string, which directs Python to search modules in the current directory first. Notice that the script directory is inserted before the entries inserted as a result of PYTHONPATH.

import sys
dirs=sys.path
for path in dirs:
   print(path)

or you can print only first path by

print(dir[0])

This post has been up for 4 years and I still struggled with this conversion problem - so the issue is still active in 2017 in some sense. I was somewhat shocked that the numpy documentation does not readily offer a simple conversion algorithm but that's another story.

I have come across another way to do the conversion that only involves modules numpy and datetime, it does not require pandas to be imported which seems to me to be a lot of code to import for such a simple conversion. I noticed that datetime64.astype(datetime.datetime) will return a datetime.datetime object if the original datetime64 is in micro-second units while other units return an integer timestamp. I use module xarray for data I/O from Netcdf files which uses the datetime64 in nanosecond units making the conversion fail unless you first convert to micro-second units. Here is the example conversion code,

import numpy as np
import datetime

def convert_datetime64_to_datetime( usert: np.datetime64 )->datetime.datetime:
    t = np.datetime64( usert, 'us').astype(datetime.datetime)
return t

Its only tested on my machine, which is Python 3.6 with a recent 2017 Anaconda distribution. I have only looked at scalar conversion and have not checked array based conversions although I'm guessing it will be good. Nor have I looked at the numpy datetime64 source code to see if the operation makes sense or not.

We were given and assignment to select only two records from the list of agents..i.e 2 random records for each agent over the span of a week etc.... and below is what we got and it works

with summary as (
Select Dbms_Random.Random As Ran_Number,
             colmn1,
             colm2,
             colm3
             Row_Number() Over(Partition By col2 Order By Dbms_Random.Random) As Rank
    From table1, table2
 Where Table1.Id = Table2.Id
 Order By Dbms_Random.Random Asc)
Select tab1.col2,
             tab1.col4,
             tab1.col5,
    From Summary s
 Where s.Rank <= 2;

For a couple of years I was a supporter of using a specific .gitignore for IntelliJ with this suggested configuration.

Not anymore.

IntelliJ is updated quite frequently, internal config file specs change more often than I would like and JetBrains flagship excels at auto-configuring itself based on maven/gradle/etc build files.

So my suggestion would be to leave all editor config files out of project and have users configure editor to their liking. Things like code styling can and should be configured at build level; say using Google Code Style or CheckStyle directly on Maven/Gradle/sbt/etc.

This ensures consistency and leaves editor files out of source code that, in my personal opinion, is where they should be.

Have you tried Cell[0]? Remember indexes start at 0, not 1.

Please remove . from your target it should be a id

<a href="#bannerformmodal" data-toggle="modal" data-target="#bannerformmodal">Load me</a>

Also you have to give your modal id like below

<div class="modal fade bannerformmodal" tabindex="-1" role="dialog" aria-labelledby="bannerformmodal" aria-hidden="true" id="bannerformmodal">

Here is the solution in a fiddle.

It can even be made dependent to another attribute changes. like this:

$('.classA').toggleClass('classB', $('input').prop('disabled'));

In this case, classB are added each time the input is disabled

Supervised learning: say a kid goes to kinder-garden. here teacher shows him 3 toys-house,ball and car. now teacher gives him 10 toys. he will classify them in 3 box of house,ball and car based on his previous experience. so kid was first supervised by teachers for getting right answers for few sets. then he was tested on unknown toys.

Unsupervised learning: again kindergarten example.A child is given 10 toys. he is told to segment similar ones. so based on features like shape,size,color,function etc he will try to make 3 groups say A,B,C and group them.

The word Supervise means you are giving supervision/instruction to machine to help it find answers. Once it learns instructions, it can easily predict for new case.

Unsupervised means there is no supervision or instruction how to find answers/labels and machine will use its intelligence to find some pattern in our data. Here it will not make prediction, it will just try to find clusters which has similar data.

Hi this is the easy and fast way if you have this case :

[QUICK Mode]

int concated;
char ABC[4]="";int a=1,b=4,c=2;            //char[] Initializing
ABC<-sprintf(ABC,"%d%d%d",a,b,c);          //without space between %d%d%d
printf("%s",ABC);                          //value as char[] is =142
concated=atoi(ABC);                        //result is 142 as int, not 1,4,2 (separeted)

//now use switch case on 142 as an integer and all possible cases

[EXPLAINED Mode]

for example : i have many menus, each choice on the 1st menu takes u to the 2nd menu, the same thing with the 2nd menu and the 3rd menu.but the Options are diferent so you know that the user has choised finnaly. exemple :

menu 1: 1 ==> menu 2: 4==> menu 3: 2 (...)the choice is 142. other cases : 111,141,131,122...

sollution: store the first 1st in a,2nd in b,3rd on c. a=1, b=4, c=2

 char ABC[4]="";
 ABC<-sprintf(ABC,"%d%d%d",a,b,c);              //without space between %d%d%d
 printf("%s",ABC);                              //value as char[]=142

      //now you want to recover your value(142) from char[] to int as  int value 142

 concated=atoi(ABC);                            //result is 142 as int, not 1,4,2 (separeted)

If you have a Uri that conforms to the DocumentContract then you probably don't want to use File. If you are on kotlin, use DocumentFile to do stuff you would in the old World use File for, and use ContentResolver to get streams.

Everything else is pretty much guaranteed to break.

You can do it by running with following command.

php -S localhost:8888

This behavior is related to Zone that is set - Internet/Intranet/etc and corresponding Security Level

You can change this by setting less secure Security Level (not recommended) or by customizing Display Mixed Content property

You can do that by following steps:

1. Click on Gear icon at the top of the browser window.
2. Select Internet Options.
3. Select the Security tab at the top.
4. Click the Custom Level... button.
5. Scroll about halfway down to the Miscellaneous heading (denoted by a "blank page" icon).
6. Under this heading is the option Display Mixed Content; set this to Enable/Prompt.
7. Click OK, then Yes when prompted to confirm the change, then OK to close the Options window.
8. Close and restart the browser.

Be very careful: NULL is a macro used mainly for pointers. The standard way of terminating a string is:

char *buffer;
...
buffer[end_position] = '\0';

This (below) works also but it is not a big difference between assigning an integer value to a int/short/long array and assigning a character value. This is why the first version is preferred and personally I like it better.

buffer[end_position] = 0; 

The tabularx package gives you

1. the total width as a first parameter, and
2. a new column type X, all X columns will grow to fill up the total width.

For your example:

\usepackage{tabularx}
% ...    
\begin{document}
% ...

\begin{tabularx}{\textwidth}{|X|X|X|}
\hline
Input & Output& Action return \\
\hline
\hline
DNF &  simulation & jsp\\
\hline
\end{tabularx}

You can follow this answer to see many different ways to process CSV in C++.

In your case, the last call to getline is actually putting the last field of the first line and then all of the remaining lines into the variable genero. This is because there is no space delimiter found up until the end of file. Try changing the space character into a newline instead:

    getline(file, genero, file.widen('\n'));

or more succinctly:

    getline(file, genero);

In addition, your check for file.good() is premature. The last newline in the file is still in the input stream until it gets discarded by the next getline() call for ID. It is at this point that the end of file is detected, so the check should be based on that. You can fix this by changing your while test to be based on the getline() call for ID itself (assuming each line is well formed).

while (getline(file, ID, ',')) {
    cout << "ID: " << ID << " " ; 

    getline(file, nome, ',') ;
    cout << "User: " << nome << " " ;

    getline(file, idade, ',') ;
    cout << "Idade: " << idade << " "  ; 

    getline(file, genero);
    cout << "Sexo: " <<  genero<< " "  ;
}

For better error checking, you should check the result of each call to getline().

You can use the core with GDB in many ways, but passing parameters which is to be passed to the executable to GDB is not the way to use the core file. This could also be the reason you got that error. You can use the core file in the following ways:

gdb <executable> <core-file> or gdb <executable> -c <core-file> or

gdb <executable>
...
(gdb) core <core-file>

When using the core file you don't have to pass arguments. The crash scenario is shown in GDB (checked with GDB version 7.1 on Ubuntu).

For example:

$ ./crash -p param1 -o param2
Segmentation fault (core dumped)
$ gdb ./crash core
GNU gdb (GDB) 7.1-ubuntu
...
Core was generated by `./crash -p param1 -o param2'. <<<<< See this line shows crash scenario
Program terminated with signal 11, Segmentation fault.
#0  __strlen_ia32 () at ../sysdeps/i386/i686/multiarch/../../i586/strlen.S:99
99    ../sysdeps/i386/i686/multiarch/../../i586/strlen.S: No such file or directory.
    in ../sysdeps/i386/i686/multiarch/../../i586/strlen.S
(gdb)

If you want to pass parameters to the executable to be debugged in GDB, use --args.

For example:

$ gdb --args ./crash -p param1 -o param2
GNU gdb (GDB) 7.1-ubuntu
...
(gdb) r
Starting program: /home/@@@@/crash -p param1 -o param2

Program received signal SIGSEGV, Segmentation fault.
__strlen_ia32 () at ../sysdeps/i386/i686/multiarch/../../i586/strlen.S:99
99    ../sysdeps/i386/i686/multiarch/../../i586/strlen.S: No such file or directory.
    in ../sysdeps/i386/i686/multiarch/../../i586/strlen.S
(gdb)

Man pages will be helpful to see other GDB options.

We can easy to upload multiple files using php by using the below script.

Download Full Source code and preview

<?php
if (isset($_POST['submit'])) {
    $j = 0; //Variable for indexing uploaded image 

 $target_path = "uploads/"; //Declaring Path for uploaded images
    for ($i = 0; $i < count($_FILES['file']['name']); $i++) {//loop to get individual element from the array

        $validextensions = array("jpeg", "jpg", "png");  //Extensions which are allowed
        $ext = explode('.', basename($_FILES['file']['name'][$i]));//explode file name from dot(.) 
        $file_extension = end($ext); //store extensions in the variable

  $target_path = $target_path . md5(uniqid()) . "." . $ext[count($ext) - 1];//set the target path with a new name of image
        $j = $j + 1;//increment the number of uploaded images according to the files in array       

   if (($_FILES["file"]["size"][$i] < 100000) //Approx. 100kb files can be uploaded.
                && in_array($file_extension, $validextensions)) {
            if (move_uploaded_file($_FILES['file']['tmp_name'][$i], $target_path)) {//if file moved to uploads folder
                echo $j. ').<span id="noerror">Image uploaded successfully!.</span><br/><br/>';
            } else {//if file was not moved.
                echo $j. ').<span id="error">please try again!.</span><br/><br/>';
            }
        } else {//if file size and file type was incorrect.
            echo $j. ').<span id="error">***Invalid file Size or Type***</span><br/><br/>';
        }
    }
}
?>

Follow these steps:

1. Add path to gitignore file

2. Run this command

   git rm -r --cached foldername
   

3. commit changes as usually.

You can make use of HTTP_ORIGIN as illustrated in the snippet below:

if ( ! array_key_exists( 'HTTP_ORIGIN', $_SERVER ) ) {
    $this->referer = $_SERVER['SERVER_NAME'];
} else {
    $this->referer = $_SERVER['HTTP_ORIGIN'];
}

One of my friends is writing a graphics app using NVIDIA CUDA. Application fits in very nicely with OOP paradigm and the problem can be decomposed into modules neatly. However, to use CUDA you need to use C, which doesn't support inheritance. Therefore, you need to be clever.

a) You devise a clever system which will emulate inheritance to a certain extent. It can be done!

i) You can use a hook system, which expects every child C of parent P to have a certain override for function F. You can make children register their overrides, which will be stored and called when required.

ii) You can use struct memory alignment feature to cast children into parents.

This can be neat but it's not easy to come up with future-proof, reliable solution. You will spend lots of time designing the system and there is no guarantee that you won't run into problems half-way through the project. Implementing multiple inheritance is even harder, if not almost impossible.

b) You can use consistent naming policy and use divide and conquer approach to create a program. It won't have any inheritance but because your functions are small, easy-to-understand and consistently formatted you don't need it. The amount of code you need to write goes up, it's very hard to stay focused and not succumb to easy solutions (hacks). However, this ninja way of coding is the C way of coding. Staying in balance between low-level freedom and writing good code. Good way to achieve this is to write prototypes using a functional language. For example, Haskell is extremely good for prototyping algorithms.

I tend towards approach b. I wrote a possible solution using approach a, and I will be honest, it felt very unnatural using that code.

There are some really good answers given already, but I wanted to throw in my two cents. Here is a very simple way to convert a view object into a entity. The simple idea is that only the properties that exist in the view model get written to the entity. This is similar to @Anik Islam Abhi's answer, but has null propagation.

public static T MapVMUpdate<T>(object updatedVM, T original)
{
    PropertyInfo[] originalProps = original.GetType().GetProperties();
    PropertyInfo[] vmProps = updatedVM.GetType().GetProperties();
    foreach (PropertyInfo prop in vmProps)
    {
        PropertyInfo projectProp = originalProps.FirstOrDefault(x => x.Name == prop.Name);
        if (projectProp != null)
        {
            projectProp.SetValue(original, prop.GetValue(updatedVM));
        }
    }
    return original;
}

Pros

• Views don't need to have all the properties of the entity.
• You never have to update code when you add remove a property to a view.
• Completely generic

Cons

• 2 hits on the database, one to load the original entity, and one to save it.

To me the simplicity and low maintenance requirements of this approach outweigh the added database call.

I found an easy way, which has a few restrictions, but worked for me:

• define the shape in defs
• define a clip path referencing the shape
• use it and double the stroke with as the outside is clipped

Here a working example:

<svg width="240" height="240" viewBox="0 0 1024 1024">_x000D_
<defs>_x000D_
 <path id="ld" d="M256,0 L0,512 L384,512 L128,1024 L1024,384 L640,384 L896,0 L256,0 Z"/>_x000D_
 <clipPath id="clip">_x000D_
  <use xlink:href="#ld"/>_x000D_
 </clipPath>_x000D_
</defs>_x000D_
<g>_x000D_
 <use xlink:href="#ld" stroke="#0081C6" stroke-width="160" fill="#00D2B8" clip-path="url(#clip)"/>_x000D_
</g>_x000D_
</svg>

Not in PHP.
phpinfo(32) contains everything PHP able to know about particular client, and there is no [windows] computer name

Instead of [(ngModel)] you can use:

// view
<input type="date" #myDate [value]="demoUser.date | date:'yyyy-MM-dd'" (input)="demoUser.date=parseDate($event.target.value)" />

// controller
parseDate(dateString: string): Date {
    if (dateString) {
        return new Date(dateString);
    }
    return null;
}

You can also choose not to use parseDate function. In this case the date will be saved as string format like "2016-10-06" instead of Date type (I haven't tried whether this has negative consequences when manipulating the data or saving to database for example).

Inorder to take thread dump/heap dump from a child java process in windows, you need to identify the child process Id as first step.

By issuing the command: jps you will be able get all java process Ids that are running on your windows machine. From this list you need to select child process Id. Once you have child process Id, there are various options to capture thread dump and heap dumps.

Capturing Thread Dumps:

There are 8 options to capture thread dumps:

1. jstack
2. kill -3
3. jvisualVM
4. JMC
5. Windows (Ctrl + Break)
6. ThreadMXBean
7. APM Tools
8. jcmd

Details about each option can be found in this article. Once you have capture thread dumps, you can use tools like fastThread, Samuraito analyze thread dumps.

Capturing Heap Dumps:

There are 7 options to capture heap dumps:

1. jmap
   

2. -XX:+HeapDumpOnOutOfMemoryError
   

3. jcmd
   

4. JVisualVM
   

5. JMX
   

6. Programmatic Approach
   

7. Administrative consoles
   

Details about each option can be found in this article. Once you have captured heap dump, you may use tools like Eclipse Memory Analysis tool, HeapHero to analyze the captured heap dumps.

Counting Words in a String:
This might also help -->

package data.structure.test;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
public class CountWords {

    public static void main(String[] args) throws IOException {
// Couting number of words in a string
        BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
        System.out.println("enter Your String");
        String input = br.readLine(); 

        char[] arr = input.toCharArray();
        int i = 0;
    boolean notCounted = true;
    int counter = 0;
    while (i < arr.length) {
        if (arr[i] != ' ') {
            if (notCounted) {
                notCounted = false;
                counter++;
            }
        } else {
            notCounted = true;
        }
        i++;
    }
    System.out.println("words in the string are : " + counter);
}

}

$.ajax({
    type: 'POST',    
    url:'http://nakolesah.ru/',
    data:'foo='+ bar+'&calibri='+ nolibri,
    success: function(msg){
        alert('wow' + msg);
    }
});

<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
  <head>
    <title>test</title>
  </head>
  <body>
    <table>
      <tr>
        <td>
          <div>content</div>
        </td>
      </tr>
    </table>
  </body>
</html>

This document was successfully checked as XHTML 1.0 Transitional!

I think your expectations and reality don't match (but when do they ever ;))

Basically, where you think the file is written and where the file is actually written are not equal (hmmm, perhaps I should write an if statement ;))

public class TestWriteFile {

    public static void main(String[] args) {
        BufferedWriter writer = null;
        try {
            //create a temporary file
            String timeLog = new SimpleDateFormat("yyyyMMdd_HHmmss").format(Calendar.getInstance().getTime());
            File logFile = new File(timeLog);

            // This will output the full path where the file will be written to...
            System.out.println(logFile.getCanonicalPath());

            writer = new BufferedWriter(new FileWriter(logFile));
            writer.write("Hello world!");
        } catch (Exception e) {
            e.printStackTrace();
        } finally {
            try {
                // Close the writer regardless of what happens...
                writer.close();
            } catch (Exception e) {
            }
        }
    }
}

Also note that your example will overwrite any existing files. If you want to append the text to the file you should do the following instead:

writer = new BufferedWriter(new FileWriter(logFile, true));

ul.menu li a:before, ul.menu li .item:before, ul.menu li .separator:before {
  content: "\2022";
  font-family: FontAwesome;
  margin-right: 10px;
  display: inline;
  vertical-align: middle;
  font-size: 1.6em;
  font-weight: normal;
}

Is present in your site's CSS, looks like it's coming from a compiled CSS file from within your application. Perhaps from a plugin. Changing the name of the "menu" class you are using should resolve the issue.

Visual for you - http://i.imgur.com/d533SQD.png

Following code prints names of classes in specified namespace defined in current assembly.
As other guys pointed out, a namespace can be scattered between different modules, so you need to get a list of assemblies first.

string nspace = "...";

var q = from t in Assembly.GetExecutingAssembly().GetTypes()
        where t.IsClass && t.Namespace == nspace
        select t;
q.ToList().ForEach(t => Console.WriteLine(t.Name));

echo "mydir/doc/ mydir/usoe ./mydir/usm" |  awk '{ split($0,array," "); for(i in array){ system("cd "array[i]" && echo $PWD") } }'

I found this solution here and this is for me much much simpler:

var n = 123

String("00000" + n).slice(-5); // returns 00123
("00000" + n).slice(-5); // returns 00123
("     " + n).slice(-5); // returns "  123" (with two spaces)

And here I made an extension to the string object:

String.prototype.paddingLeft = function (paddingValue) {
   return String(paddingValue + this).slice(-paddingValue.length);
};

An example to use it:

function getFormattedTime(date) {
  var hours = date.getHours();
  var minutes = date.getMinutes();

  hours = hours.toString().paddingLeft("00");
  minutes = minutes.toString().paddingLeft("00");

  return "{0}:{1}".format(hours, minutes);
};

String.prototype.format = function () {
    var args = arguments;
    return this.replace(/{(\d+)}/g, function (match, number) {
        return typeof args[number] != 'undefined' ? args[number] : match;
    });
};

This will return a time in the format "15:30"

glBegin(GL_POLYGON);                        // Middle circle
double radius = 0.2;
double ori_x = 0.0;                         // the origin or center of circle
double ori_y = 0.0;
for (int i = 0; i <= 300; i++) {
    double angle = 2 * PI * i / 300;
    double x = cos(angle) * radius;
    double y = sin(angle) * radius;
    glVertex2d(ori_x + x, ori_y + y);
}
glEnd();

Not sure if MySQL has row_number function. If so you can use it to get the desired result. On SQL Server you can do something similar to:

CREATE TABLE p
(
 person NVARCHAR(10),
 gp INT,
 age INT
);
GO
INSERT  INTO p
VALUES  ('Bob', 1, 32);
INSERT  INTO p
VALUES  ('Jill', 1, 34);
INSERT  INTO p
VALUES  ('Shawn', 1, 42);
INSERT  INTO p
VALUES  ('Jake', 2, 29);
INSERT  INTO p
VALUES  ('Paul', 2, 36);
INSERT  INTO p
VALUES  ('Laura', 2, 39);
GO

SELECT  t.person, t.gp, t.age
FROM    (
         SELECT *,
                ROW_NUMBER() OVER (PARTITION BY gp ORDER BY age DESC) row
         FROM   p
        ) t
WHERE   t.row = 1;

This will be work in Both version Python2 OR Python3

print (u"{}[2J{}[;H".format(chr(27), chr(27)))

I used @ControllerAdvice , please check is available in Spring 3.X; I am using it in Spring 4.0.

@ControllerAdvice 
public class CommonController extends ControllerBase{
@Autowired
MyService myServiceInstance;

    @ModelAttribute("userList")
    public List<User> getUsersList()
    {
       //some code
       return ...
    }
}

I had this problem after upgrading to PHP5.6. My answer is very similar to Adriano's, except I had to run:

sudo apt-get install php5.6-curl

Notice the "5.6". Installing php5-curl didn't work for me.

Sometimes, this error pops up because of the kernel has reached its limit. Try to restart the kernel redo the necessary steps.

As you state in one of your comments that the table in question is in a different database, then ownership chaining applies. I suspect there is a break in the chain somewhere - check that link for full details.

It is because display:inline-block takes into account white-space in the html. If you remove the white-space between the div's it works as expected. Live Example: http://jsfiddle.net/XCDsu/4/

<div id="col1">content</div><div id="col2">content</div>

The easiest way to read from a file and write to a file:

//Read from a file
string something = File.ReadAllText("C:\\Rfile.txt");

//Write to a file
using (StreamWriter writer = new StreamWriter("Wfile.txt"))
{
    writer.WriteLine(something);
}

Adding spring-boot-maven-plugin in the build resolved it in my case

<build>
    <finalName>mysample-web</finalName>
    <plugins>
    <plugin>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-maven-plugin</artifactId>
        <dependencies>
            <dependency>
                <groupId>org.springframework</groupId>
                <artifactId>springloaded</artifactId>
                <version>1.2.1.RELEASE</version>
            </dependency>
        </dependencies>
    </plugin>
    </plugins>
</build>  

call a function after complete page load set time out

setTimeout(function() {_x000D_
   var val = $('.GridStyle tr:nth-child(2) td:nth-child(4)').text();_x000D_
 for(var i, j = 0; i = ddl2.options[j]; j++) {_x000D_
  if(i.text == val) {      _x000D_
   ddl2.selectedIndex = i.index;_x000D_
   break;_x000D_
  }_x000D_
 } _x000D_
}, 1000);

There were just a couple of minor amendments required:

ans=True
while ans:
    print ("""
    1.Add a Student
    2.Delete a Student
    3.Look Up Student Record
    4.Exit/Quit
    """)
    ans=raw_input("What would you like to do? ") 
    if ans=="1": 
      print("\n Student Added") 
    elif ans=="2":
      print("\n Student Deleted") 
    elif ans=="3":
      print("\n Student Record Found") 
    elif ans=="4":
      print("\n Goodbye") 
    elif ans !="":
      print("\n Not Valid Choice Try again") 

I have changed the four quotes to three (this is the number required for multiline quotes), added a closing bracket after "What would you like to do? " and changed input to raw_input.

I wanted to combine a couple of posts to make a full answer of this since it does appear to be a few steps.

1. Above advice by @madtracey

/etc/mysql/my.cnf or /etc/mysql/mysql.conf.d/mysqld.cnf

[mysql]
default-character-set=utf8mb4

[mysqld_safe]
socket          = /var/run/mysqld/mysqld.sock
nice            = 0

[mysqld]
##
character-set-server=utf8mb4
collation-server=utf8mb4_unicode_ci
init_connect='SET NAMES utf8mb4'
sql_mode=STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION

Again from advice above all jdbc connections had characterEncoding=UTF-8and characterSetResults=UTF-8 removed from them

With this set -Dfile.encoding=UTF-8 appeared to make no difference.

I could still not write international text into db getting same failure as above

Now using this how-to-convert-an-entire-mysql-database-characterset-and-collation-to-utf-8

Update all your db to use utf8mb4

ALTER DATABASE YOURDB CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;

Run this query that gives you what needs to be rung

SELECT CONCAT(
'ALTER TABLE ',  table_name, ' CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;  ', 
'ALTER TABLE ',  table_name, ' CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;  ')
FROM information_schema.TABLES AS T, information_schema.`COLLATION_CHARACTER_SET_APPLICABILITY` AS C
WHERE C.collation_name = T.table_collation
AND T.table_schema = 'YOURDB'
AND
(C.CHARACTER_SET_NAME != 'utf8mb4'
    OR
 C.COLLATION_NAME not like 'utf8mb4%')

Copy paste output in editor replace all | with nothing post back into mysql when connected to correct db.

That is all that had to be done and all seems to work for me. Not the -Dfile.encoding=UTF-8 is not enabled and it appears to work as expected

E2A Still having an issue ? I certainly am in production so it turns out you do need to check over what has been done by above, since it sometimes does not work, here is reason and fix in this scenario:

show create table user

  `password` varchar(255) CHARACTER SET latin1 NOT NULL,
  `username` varchar(255) CHARACTER SET latin1 NOT NULL,

You can see some are still latin attempting to manually update the record:

ALTER TABLE user CONVERT TO CHARACTER SET utf8mb4;
ERROR 1071 (42000): Specified key was too long; max key length is 767 bytes

So let's narrow it down:

mysql> ALTER TABLE user change username username varchar(255) CHARACTER SET utf8mb4 not NULL;
ERROR 1071 (42000): Specified key was too long; max key length is 767 bytes
mysql> ALTER TABLE user change username username varchar(100) CHARACTER SET utf8mb4 not NULL;
Query OK, 5 rows affected (0.01 sec)

In short I had to reduce the size of that field in order to get the update to work.

Now when I run:

mysql> ALTER TABLE user CONVERT TO CHARACTER SET utf8mb4;
Query OK, 5 rows affected (0.01 sec)
Records: 5  Duplicates: 0  Warnings: 0

It all works

Put the following in your .vimrc

autocmd BufRead *.py set smartindent cinwords=if,elif,else,for,while,try,except,finally,def,class
autocmd BufRead *.py set nocindent
autocmd BufWritePre *.py normal m`:%s/\s\+$//e ``
filetype plugin indent on

See also the detailed instructions

I personally use JetBrain's PyCharm with the IdeaVIM plugin when doing anything complex, for simple editing the additions to .vimrc seem sufficient.

In android NDK go to android-ndk-r9b>/sources/cxx-stl/gnu-libstdc++/4.X/include in linux machines

I've found solution from the below link http://osdir.com/ml/android-ndk/2011-09/msg00336.html

Your original rewrite should almost work. I'm not sure why it would be redirecting, but I think what you really want is just

rewrite ^ /base.html break;

You should be able to put that in a location or directly in the server.

Yes you can and actually, you should use StyleSheet.create to create your styles.

import React, { Component } from 'react';
import {
    StyleSheet,
    Text,
    View
} from 'react-native';    

class Header extends Component {
    constructor(props){
        super(props);
    }    

    render() {
        const { title, style } = this.props;
        const { header, text } = defaultStyle;
        const combineStyles = StyleSheet.flatten([header, style]);    

        return (
            <View style={ combineStyles }>
                <Text style={ text }>
                    { title }
                </Text>
            </View>
        );
    }
}    

const defaultStyle = StyleSheet.create({
    header: {
        justifyContent: 'center',
        alignItems: 'center',
        backgroundColor: '#fff',
        height: 60,
        paddingTop: 15,
        shadowColor: '#000',
        shadowOffset: { width: 0, height: 3 },
        shadowOpacity: 0.4,
        elevation: 2,
        position: 'relative'
    },
    text: {
        color: '#0d4220',
        fontSize: 16
    }
});    

export default Header;

And then:

<Header title="HOME" style={ {backgroundColor: '#10f1f0'} } />

What worked for me is the following (in view of the confusion in other answers):

<td style="text-align:center;">
    <input type="radio" name="ageneral" value="male">
</td>

The proposed solution (text-align) works but must be used in a style attribute.

By alphabetical-order I assume the order to be : A|a < B|b < C|c... Hope this is what @Nick is(or was) looking for and the answer follows the above assumption.

I would suggest to have a class implement compare method of Comparator-interface as :

public int compare(Object o1, Object o2) {
    return o1.toString().compareToIgnoreCase(o2.toString());
}

and from the calling method invoke the Arrays.sort method with custom Comparator as :

Arrays.sort(inputArray, customComparator);

Observed results: input Array : "Vani","Kali", "Mohan","Soni","kuldeep","Arun"

output(Alphabetical-order) is : Arun, Kali, kuldeep, Mohan, Soni, Vani

Output(Natural-order by executing Arrays.sort(inputArray) is : Arun, Kali, Mohan, Soni, Vani, kuldeep

Thus in case of natural ordering, [Vani < kuldeep] which to my understanding of alphabetical-order is not the thing desired.

for more understanding of natural and alphabetical/lexical order visit discussion here

I think the Python method insert is what you're looking for:

Inserts element x at position i. list.insert(i,x)

array = [1,2,3,4,5]

array.insert(1,20)

print(array)

# prints [1,2,20,3,4,5]

This is probably not suitable for production because it will open the keyboard. Note that the boolean returned by similar functions is not specified in the API and are therefore unreliable. Refer to the documentation here...

https://developer.android.com/reference/android/view/inputmethod/InputMethodManager#showSoftInput(android.view.View,%20int,%20android.os.ResultReceiver)

public boolean showSoftInput (View view, 
            int flags, 
            ResultReceiver resultReceiver)

Note that this method takes a ResultReceiver. It can get the results: RESULT_UNCHANGED_SHOWN, RESULT_UNCHANGED_HIDDEN, RESULT_SHOWN, or RESULT_HIDDEN. If you get RESULT_UNCHANGED_SHOWN, the keyboard was visible. If you need it to stay closed if it was closed, you will need to close it.

if you are having dependency on some other project in work space and these projects are not build properly, such error might come. try building such dependent projects first, it may help

How about:

myString.Any(x => Char.IsWhiteSpace(x))

Or if you like using the "method group" syntax:

myString.Any(Char.IsWhiteSpace)

Why are they using <i> tag to display icons ?

Because it is:

• Short
• i stands for icon (although not in HTML)

Is it not a bad practice ?

Awful practice. It is a triumph of performance over semantics.

Just used version 2 of the AWS CLI. For the s3 option, there is also a --dryrun option now to show you what will happen:

aws s3 --dryrun cp s3://bucket/filename /path/to/dest/folder --recursive

"Headers already sent" means that your PHP script already sent the HTTP headers, and as such it can't make modifications to them now.

Check that you don't send ANY content before calling session_start. Better yet, just make session_start the first thing you do in your PHP file (so put it at the absolute beginning, before all HTML etc).

There is actually a way to do this with html only. Just sets:

<img src="#" width height="50%">

I'd suggest storing these in a Hashtable. You can then access an item in the collection using the key, it's a much more efficient lookup.

var myObjects = new Hashtable();
myObjects.Add(yourObject.Title, yourObject);
...
var myRetrievedObject = myObjects["TargetTitle"];

If the first column is always the same size (including the spaces), then you can just take those characters (via LEFT) and clean up the spaces (with RTRIM):

SELECT RTRIM(LEFT(YourColumn, YourColumnSize))

Alternatively, you can extract the second (or third, etc.) column (using SUBSTRING):

SELECT RTRIM(SUBSTRING(YourColumn, PreviousColumnSizes, YourColumnSize))

One benefit of this approach (especially if YourColumn is the result of a computation) is that YourColumn is only specified once.

HTTP_CLIENT_IP is the most reliable way of getting the user's IP address. Next is HTTP_X_FORWARDED_FOR, followed by REMOTE_ADDR. Check all three, in that order, assuming that the first one that is set (isset($_SERVER['HTTP_CLIENT_IP']) returns true if that variable is set) is correct. You can independently check if the user is using a proxy using various methods. Check this out.

As suggested on the Chrome Mobile Emulation page, you can use Clumsy on Windows, Network Link Conditioner on Mac OS X and dummynet on Linux.

Post::where('id',3)->update(['title'=>'Updated title']);

Marc's code is nearly correct. A complete version of the code is -

def addressInNetwork3(ip,net):
    '''This function allows you to check if on IP belogs to a Network'''
    ipaddr = struct.unpack('=L',socket.inet_aton(ip))[0]
    netaddr,bits = net.split('/')
    netmask = struct.unpack('=L',socket.inet_aton(calcDottedNetmask(int(bits))))[0]
    network = struct.unpack('=L',socket.inet_aton(netaddr))[0] & netmask
    return (ipaddr & netmask) == (network & netmask)

def calcDottedNetmask(mask):
    bits = 0
    for i in xrange(32-mask,32):
        bits |= (1 << i)
    return "%d.%d.%d.%d" % ((bits & 0xff000000) >> 24, (bits & 0xff0000) >> 16, (bits & 0xff00) >> 8 , (bits & 0xff))

Obviously from the same sources as above...

A very Important note is that the first code has a small glitch - The IP address 255.255.255.255 also shows up as a Valid IP for any subnet. I had a heck of time getting this code to work and thanks to Marc for the correct answer.

The best way to accomplish that is to use POST which is a method of Hypertext Transfer Protocol https://developer.mozilla.org/en-US/docs/Web/HTTP/Methods

index.php

<html>
<body>

<form action="site2.php" method="post">
Name: <input type="text" name="name">
Email: <input type="text" name="email">
<input type="submit">
</form>

</body>
</html> 

site2.php

 <html>
 <body>

 Hello <?php echo $_POST["name"]; ?>!<br>
 Your mail is <?php echo $_POST["mail"]; ?>.

 </body>
 </html> 

output

Hello "name" !

Your email is "[email protected]" .

suppose the multiSelect is the Multiple-Select-Element, just use its selectedOptions Property:

//show all selected options in the console:

for ( var i = 0; i < multiSelect.selectedOptions.length; i++) {
  console.log( multiSelect.selectedOptions[i].value);
}

In lldb as of beta 5, you can see the class of an object with the command:

fr v -d r shipDate

which outputs something like:

(DBSalesOrderShipDate_DBSalesOrderShipDate_ *) shipDate = 0x7f859940

The command expanded out means something like:

Frame Variable (print a frame variable) -d run_target (expand dynamic types)

Something useful to know is that using "Frame Variable" to output variable values guarantees no code is executed.

use blow code for compute height + scroll

var dif = document.documentElement.scrollHeight - document.documentElement.clientHeight;

var height = dif + document.documentElement.scrollHeight +"px";

What does this thread join code mean?

To quote from the Thread.join() method javadocs:

join() Waits for this thread to die.

There is a thread that is running your example code which is probably the main thread.

1. The main thread creates and starts the t1 and t2 threads. The two threads start running in parallel.
2. The main thread calls t1.join() to wait for the t1 thread to finish.
3. The t1 thread completes and the t1.join() method returns in the main thread. Note that t1 could already have finished before the join() call is made in which case the join() call will return immediately.
4. The main thread calls t2.join() to wait for the t2 thread to finish.
5. The t2 thread completes (or it might have completed before the t1 thread did) and the t2.join() method returns in the main thread.

It is important to understand that the t1 and t2 threads have been running in parallel but the main thread that started them needs to wait for them to finish before it can continue. That's a common pattern. Also, t1 and/or t2 could have finished before the main thread calls join() on them. If so then join() will not wait but will return immediately.

t1.join() means cause t2 to stop until t1 terminates?

No. The main thread that is calling t1.join() will stop running and wait for the t1 thread to finish. The t2 thread is running in parallel and is not affected by t1 or the t1.join() call at all.

In terms of the try/catch, the join() throws InterruptedException meaning that the main thread that is calling join() may itself be interrupted by another thread.

while (true) {

Having the joins in a while loop is a strange pattern. Typically you would do the first join and then the second join handling the InterruptedException appropriately in each case. No need to put them in a loop.

Check this out:

db.collection.find().pretty()

Just use the -H parameter several times:

curl -H "Accept-Charset: utf-8" -H "Content-Type: application/x-www-form-urlencoded" http://www.some-domain.com

I had the exact same question and ended up here. I had a different approach that seems much simpler (maybe newer versions of gson?).

    Gson gson = new Gson();
    Map jsonObject = (Map) gson.fromJson(data, Object.class);

with the following json

{
  "map-00": {
    "array-00": [
      "entry-00",
      "entry-01"
     ],
     "value": "entry-02"
   }
}

The following

    Map map00 = (Map) jsonObject.get("map-00");
    List array00 = (List) map00.get("array-00");
    String value = (String) map00.get("value");
    for (int i = 0; i < array00.size(); i++) {
        System.out.println("map-00.array-00[" + i + "]= " + array00.get(i));
    }
    System.out.println("map-00.value = " + value);

outputs

map-00.array-00[0]= entry-00
map-00.array-00[1]= entry-01
map-00.value = entry-02

You could dynamically check using instanceof when navigating your jsonObject. Something like

Map json = gson.fromJson(data, Object.class);
if(json.get("field") instanceof Map) {
  Map field = (Map)json.get("field");
} else if (json.get("field") instanceof List) {
  List field = (List)json.get("field");
} ...

It works for me, so it must work for you ;-)

So I found a solution. I created an angularJS service, we'll call it MyDataRepository and I created a module for it. I then serve up this javascript file from my server-side controller:

HTML:

<script src="path/myData.js"></script>

Server-side:

@RequestMapping(value="path/myData.js", method=RequestMethod.GET)
public ResponseEntity<String> getMyDataRepositoryJS()
{
    // Populate data that I need into a Map
    Map<String, String> myData = new HashMap<String,String>();
    ...
    // Use Jackson to convert it to JSON
    ObjectMapper mapper = new ObjectMapper();
    String myDataStr = mapper.writeValueAsString(myData);

    // Then create a String that is my javascript file
    String myJS = "'use strict';" +
    "(function() {" +
    "var myDataModule = angular.module('myApp.myData', []);" +
    "myDataModule.service('MyDataRepository', function() {" +
        "var myData = "+myDataStr+";" +
        "return {" +
            "getData: function () {" +
                "return myData;" +
            "}" +
        "}" +
    "});" +
    "})();"

    // Now send it to the client:
    HttpHeaders responseHeaders = new HttpHeaders();
    responseHeaders.add("Content-Type", "text/javascript");
    return new ResponseEntity<String>(myJS , responseHeaders, HttpStatus.OK);
}

I can then inject MyDataRepository where ever I need it:

someOtherModule.service('MyOtherService', function(MyDataRepository) {
    var myData = MyDataRepository.getData();
    // Do what you have to do...
}

This worked great for me, but I am open to any feedback if anyone has any. }

I think the best way, is to use a Propper Form and to use jQuery.serializeArray.

<!-- a form with any type of input -->
<form class="a-form">
    <select name="field[something]">...</select>
    <input type="checkbox" name="field[somethingelse]" ... />
    <input type="radio" name="field[somethingelse2]" ... />
    <input type="text" name="field[somethingelse3]" ... />
</form>

<!-- sample ajax call -->
<script>
$(document).ready(function(){
    $.ajax({
        url: 'submit.php',
        type: 'post',
        data: $('form.a-form').serializeArray(),
        success: function(response){
            ...
        }
    });
});
</script>

The Values will be available in PHP as $_POST['field'][INDEX].

One other difference not mentioned so far is that

• with Clone() the destination array need not exist yet since a new one is created from scratch.
• with CopyTo() not only does the destination array need to already exist, it needs to be large enough to hold all the elements in the source array from the index you specify as the destination.

You can use ResourceBundle class to read the properties file.

ResourceBundle rb = ResourceBundle.getBundle("myProp.properties");

Place your script inside the body tag

<body>
  // Rest of html
  <script>
  function hideButton() {
    $(".loading").hide();
  }
function showButton() {
  $(".loading").show();
}
</script> 
< /body>

If you check this JSFIDDLE and click on javascript, you will see the load Type body is selected

You need to change permissions on the folder bootstrap/css. Your super user may be able to access it but it doesn't mean apache or nginx have access to it, that's why you still need to change the permissions.

Tip: I usually make the apache/nginx's user group owner of that kind of folders and give 775 permission to it.

You've created a new repository and added some files to the index, but you haven't created your first commit yet. After you've done:

 git add a_text_file.txt 

... do:

 git commit -m "Initial commit."

... and those errors should go away.

Just to extend on the WiredPrairie's answer a little, a mini component that can be opened and closed.

Can be used like:

<Pretty data={this.state.data}/>

export default React.createClass({

    style: {
        backgroundColor: '#1f4662',
        color: '#fff',
        fontSize: '12px',
    },

    headerStyle: {
        backgroundColor: '#193549',
        padding: '5px 10px',
        fontFamily: 'monospace',
        color: '#ffc600',
    },

    preStyle: {
        display: 'block',
        padding: '10px 30px',
        margin: '0',
        overflow: 'scroll',
    },

    getInitialState() {
        return {
            show: true,
        };
    },

    toggle() {
        this.setState({
            show: !this.state.show,
        });
    },

    render() {
        return (
            <div style={this.style}>
                <div style={this.headerStyle} onClick={ this.toggle }>
                    <strong>Pretty Debug</strong>
                </div>
                {( this.state.show ?
                    <pre style={this.preStyle}>
                        {JSON.stringify(this.props.data, null, 2) }
                    </pre> : false )}
            </div>
        );
    }
});

Update

A more modern approach (now that createClass is on the way out)

import styles from './DebugPrint.css'

import autoBind from 'react-autobind'
import classNames from 'classnames'
import React from 'react'

export default class DebugPrint extends React.PureComponent {
  constructor(props) {
    super(props)
    autoBind(this)
    this.state = {
      show: false,
    }
  }    

  toggle() {
    this.setState({
      show: !this.state.show,
    });
  }

  render() {
    return (
      <div style={styles.root}>
        <div style={styles.header} onClick={this.toggle}>
          <strong>Debug</strong>
        </div>
        {this.state.show 
          ? (
            <pre style={styles.pre}>
              {JSON.stringify(this.props.data, null, 2) }
            </pre>
          )
          : null
        }
      </div>
    )
  }
}

And your style file

.root { backgroundColor: '#1f4662'; color: '#fff'; fontSize: '12px'; }

.header { backgroundColor: '#193549'; padding: '5px 10px'; fontFamily: 'monospace'; color: '#ffc600'; }

.pre { display: 'block'; padding: '10px 30px'; margin: '0'; overflow: 'scroll'; }

You could use org.apache.commons.lang.ArrayUtils : ArrayUtils.reverse(array)

I use sp_who to get list of all process in database. This is better because you may want to review which process to kill.

declare @proc table(
    SPID bigint,
    Status nvarchar(255),
    Login nvarchar(255),
    HostName nvarchar(255),
    BlkBy nvarchar(255),
    DBName nvarchar(255),
    Command nvarchar(MAX),
    CPUTime bigint,
    DiskIO bigint,
    LastBatch nvarchar(255),
    ProgramName nvarchar(255),
    SPID2 bigint,
    REQUESTID bigint
)

insert into @proc
exec sp_who2

select  *, KillCommand = concat('kill ', SPID, ';')
from    @proc

Result
You can use command in KillCommand column to kill the process you want to.

SPID    KillCommand
26      kill 26;
27      kill 27;
28      kill 28;

As short as @jumbo's answer is :-) you can do it even more tersely. This just returns the Count property of the array returned by the antecedent sub-expression:

@(Get-Alias).Count

A couple points to note:

1. You can put an arbitrarily complex expression in place of Get-Alias, for example:

   @(Get-Process | ? { $_.ProcessName -eq "svchost" }).Count
   

2. The initial at-sign (@) is necessary for a robust solution. As long as the answer is two or greater you will get an equivalent answer with or without the @, but when the answer is zero or one you will get no output unless you have the @ sign! (It forces the Count property to exist by forcing the output to be an array.)

2012.01.30 Update

The above is true for PowerShell V2. One of the new features of PowerShell V3 is that you do have a Count property even for singletons, so the at-sign becomes unimportant for this scenario.

Generally the reason why the "instanceof" operator is frowned upon in a case like that (where the instanceof is checking for subclasses of this base class) is because what you should be doing is moving the operations into a method and overridding it for the appropriate subclasses. For instance, if you have:

if (o instanceof Class1)
   doThis();
else if (o instanceof Class2)
   doThat();
//...

You can replace that with

o.doEverything();

and then have the implementation of "doEverything()" in Class1 call "doThis()", and in Class2 call "doThat()", and so on.

Regex.Replace(strInput, strToken.Replace("$", "[$]"), strReplaceWith, RegexOptions.IgnoreCase);

I had the same problem but I solved in other way (becouse at right click on project folder no Maven tab apears only if I do that on pom.xml I can see a Maven tab):

So I tink that you get that error because the IDE (Eclipse) didn`t import the dependecies from Maven. Since you are using Spring framework and you probably have STS allready installed right-click on project folder Spring Tools -> Update Maven Dependecies.

I`m using Eclipse JUNO m2eclipse 1.3.0 Spring IDEE 3.1

Here is another way:

df[[i for i in list(df.columns) if i != '<your column>']]

You just pass all columns to be shown except of the one you do not want.

To upload multiple files with angular form data, make sure you have this in your component.html

Upload Documents

                <div class="row">


                  <div class="col-md-4">
                     &nbsp; <small class="text-center">  Driver  Photo</small>
                    <div class="form-group">
                      <input  (change)="onFileSelected($event, 'profilepic')"  type="file" class="form-control" >
                    </div>
                  </div>

                  <div class="col-md-4">
                     &nbsp; <small> Driver ID</small>
                    <div class="form-group">
                      <input  (change)="onFileSelected($event, 'id')"  type="file" class="form-control" >
                    </div>
                  </div>

                  <div class="col-md-4">
                    &nbsp; <small>Driving Permit</small>
                    <div class="form-group">
                      <input type="file"  (change)="onFileSelected($event, 'drivingpermit')" class="form-control"  />
                    </div>
                  </div>
                </div>



                <div class="row">
                    <div class="col-md-6">
                       &nbsp; <small>Car Registration</small>
                      <div class="form-group">
                        <div class="input-group mb-4">
                            <input class="form-control" 
                (change)="onFileSelected($event, 'carregistration')" type="file"> <br>
                        </div>
                      </div>
                    </div>

                    <div class="col-md-6">
                        <small id="li"> Car Insurance</small>
                      <div class="form-group">
                        <div class="input-group mb-4">
                          <input class="form-control" (change)="onFileSelected($event, 

                         'insurancedocs')"   type="file">
                        </div>
                      </div>
                    </div>

                  </div>


                <div style="align-items:c" class="modal-footer">
                    <button type="button" class="btn btn-secondary" data- 
                  dismiss="modal">Close</button>
                    <button class="btn btn-primary"  (click)="uploadFiles()">Upload 
                  Files</button>
                  </div>
              </form>

In your componenet.ts file declare array selected files like this

selectedFiles = [];

// array of selected files

onFileSelected(event, type) {
    this.selectedFiles.push({ type, file: event.target.files[0] });
  }

//in the upload files method, append your form data like this

uploadFiles() {
    const formData = new FormData(); 

    this.selectedFiles.forEach(file => {
      formData.append(file.type, file.file, file.file.name); 
    });
    formData.append("driverid", this.driverid);

    this.driverService.uploadDriverDetails(formData).subscribe(
      res => {
        console.log(res); 

      },
      error => console.log(error.message)
    );
  }

NOTE: I hope this solution works for you friends

I came into the same situation. As a workaround, I just created a view (If you have privileges) and described it and dropped it later. :)

There recently was a discussion about this kicked off in usenet: Why no VLAs in C++0x.

I agree with those people that seem to agree that having to create a potential large array on the stack, which usually has only little space available, isn't good. The argument is, if you know the size beforehand, you can use a static array. And if you don't know the size beforehand, you will write unsafe code.

C99 VLAs could provide a small benefit of being able to create small arrays without wasting space or calling constructors for unused elements, but they will introduce rather large changes to the type system (you need to be able to specify types depending on runtime values - this does not yet exist in current C++, except for new operator type-specifiers, but they are treated specially, so that the runtime-ness doesn't escape the scope of the new operator).

You can use std::vector, but it is not quite the same, as it uses dynamic memory, and making it use one's own stack-allocator isn't exactly easy (alignment is an issue, too). It also doesn't solve the same problem, because a vector is a resizable container, whereas VLAs are fixed-size. The C++ Dynamic Array proposal is intended to introduce a library based solution, as alternative to a language based VLA. However, it's not going to be part of C++0x, as far as I know.

When compiling with support for arm64, this won't generate a warning:

[NSString stringWithFormat:@"%lu", (unsigned long)myNSUInteger];

str(strval).isdigit()

seems to be simple.

Handles values stored in as a string or int or float

if you are using matplotlib version 3.1.1 or above, you can try:

import matplotlib.pyplot as plt
from matplotlib.colors import ListedColormap

x = [1, 3, 4, 6, 7, 9]
y = [0, 0, 5, 8, 8, 8]
classes = ['A', 'B', 'C']
values = [0, 0, 1, 2, 2, 2]
colours = ListedColormap(['r','b','g'])
scatter = plt.scatter(x, y,c=values, cmap=colours)
plt.legend(handles=scatter.legend_elements()[0], labels=classes)

A possible idea would be to:

1. delete the width: 25%; float:left; from the style of your divs
2. wrap each of the four colored divs in a div that has style="width: 25%; float:left;"

The advantage with this approach is that all four columns will have equal width and the gap between them will always be 5px * 2.

Here's what it looks like:

.cellContainer {_x000D_
  width: 25%;_x000D_
  float: left;_x000D_
}

<div style="width:100%; height: 200px; background-color: grey;">_x000D_
  <div class="cellContainer">_x000D_
    <div style="margin: 5px; background-color: red;">A</div>_x000D_
  </div>_x000D_
  <div class="cellContainer">_x000D_
    <div style="margin: 5px; background-color: orange;">B</div>_x000D_
  </div>_x000D_
  <div class="cellContainer">_x000D_
    <div style="margin: 5px; background-color: green;">C</div>_x000D_
  </div>_x000D_
  <div class="cellContainer">_x000D_
    <div style="margin: 5px; background-color: blue;">D</div>_x000D_
  </div>_x000D_
</div>

// Need to implement SensorListener
public class ShakeActivity extends Activity implements SensorListener {
// For shake motion detection.
private SensorManager sensorMgr;
private long lastUpdate = -1;
private float x, y, z;
private float last_x, last_y, last_z;
private static final int SHAKE_THRESHOLD = 800;

protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
// start motion detection
sensorMgr = (SensorManager) getSystemService(SENSOR_SERVICE);
boolean accelSupported = sensorMgr.registerListener(this,
    SensorManager.SENSOR_ACCELEROMETER,
    SensorManager.SENSOR_DELAY_GAME);

if (!accelSupported) {
    // on accelerometer on this device
    sensorMgr.unregisterListener(this,
            SensorManager.SENSOR_ACCELEROMETER);
}
}

protected void onPause() {
if (sensorMgr != null) {
    sensorMgr.unregisterListener(this,
            SensorManager.SENSOR_ACCELEROMETER);
    sensorMgr = null;
    }
super.onPause();
}

public void onAccuracyChanged(int arg0, int arg1) {
// TODO Auto-generated method stub
}

public void onSensorChanged(int sensor, float[] values) {
if (sensor == SensorManager.SENSOR_ACCELEROMETER) {
    long curTime = System.currentTimeMillis();
    // only allow one update every 100ms.
    if ((curTime - lastUpdate)> 100) {
    long diffTime = (curTime - lastUpdate);
    lastUpdate = curTime;

    x = values[SensorManager.DATA_X];
    y = values[SensorManager.DATA_Y];
    z = values[SensorManager.DATA_Z];

    float speed = Math.abs(x+y+z - last_x - last_y - last_z)
                          / diffTime * 10000;
    if (speed > SHAKE_THRESHOLD) {
        // yes, this is a shake action! Do something about it!
    }
    last_x = x;
    last_y = y;
    last_z = z;
    }
}
}
}

I think the best way to do that is to first read the file into a byte array, then convert the array to an image with ImageIO.read()

Just add weightSum tag to linearlayout to 1 and for the corresponding view beneath it give layout_weight as .9 it will create a space between the views. You can experiment with the values to get appropriate value for you.

I think the second one should be

var itemList = (from t in ctn.Items
                where !t.Items && t.DeliverySelection
                select t).OrderByDescending(c => c.Delivery.SubmissionDate);

Cross browser testing java scripts

public class MultipleBrowser {

    public WebDriver driver= null;
    String browser="mozilla";
    String url="https://www.omnicard.com";

    @BeforeMethod
    public void LaunchBrowser() {

        if(browser.equalsIgnoreCase("mozilla"))
            driver= new FirefoxDriver();
        else if(browser.equalsIgnoreCase("safari"))
            driver= new SafariDriver();
        else if(browser.equalsIgnoreCase("chrome"))
            //System.setProperty("webdriver.chrome.driver","/Users/mhossain/Desktop/chromedriver");
            driver= new ChromeDriver(); 
        driver.manage().timeouts().implicitlyWait(4, TimeUnit.SECONDS);
        driver.navigate().to(url);
    }

}

but when you want to run firefox you need to chrome path disable, otherwise browser will launch but application may not.(try both way) .

package-lock.json is written to when a numerical value in a property such as the "version" property, or a dependency property is changed in package.json.

If these numerical values in package.json and package-lock.json match, package-lock.json is read from.

If these numerical values in package.json and package-lock.json do not match, package-lock.json is written to with those new values, and new modifiers such as the caret and tilde if they are present. But it is the numeral that is triggering the change to package-lock.json.

To see what I mean, do the following. Using package.json without package-lock.json, run npm install with:

{
  "name": "test",
  "version": "1.0.0",
  ...
  "devDependencies": {
    "sinon": "7.2.2"
  }
}

package-lock.json will now have:

"sinon": {
  "version": "7.2.2",

Now copy/paste both files to a new directory. Change package.json to (only adding caret):

{
  "name": "test",
  "version": "1.0.0",
  ...
  "devDependencies": {
    "sinon": "^7.2.2"
  }
}

run npm install. If there were no package-lock.json file, [email protected] would be installed. npm install is reading from package-lock.json and installing 7.2.2.

Now change package.json to:

{
  "name": "test",
  "version": "1.0.0",
  ...
  "devDependencies": {
    "sinon": "^7.3.0"
  }
}

run npm install. package-lock.json has been written to, and will now show:

"sinon": {
  "version": "^7.3.0",

Update 3: As other answers point out as well, the npm ci command got introduced in npm 5.7.0 as additional way to achieve fast and reproducible builds in the CI context. See the documentation and npm blog for further information.

Update 2: The issue to update and clarify the documentation is GitHub issue #18103.

Update 1: The behaviour that was described below got fixed in npm 5.4.2: the currently intended behaviour is outlined in GitHub issue #17979.

Original answer: The behaviour of package-lock.json was changed in npm 5.1.0 as discussed in issue #16866. The behaviour that you observe is apparently intended by npm as of version 5.1.0.

That means that package.json can override package-lock.json whenever a newer version is found for a dependency in package.json. If you want to pin your dependencies effectively, you now must specify the versions without a prefix, e.g., you need to write them as 1.2.0 instead of ~1.2.0 or ^1.2.0. Then the combination of package.json and package-lock.json will yield reproducible builds. To be clear: package-lock.json alone no longer locks the root level dependencies!

Whether this design decision was good or not is arguable, there is an ongoing discussion resulting from this confusion on GitHub in issue #17979. (In my eyes it is a questionable decision; at least the name lock doesn't hold true any longer.)

One more side note: there is also a restriction for registries that don’t support immutable packages, such as when you pull packages directly from GitHub instead of npmjs.org. See this documentation of package locks for further explanation.

What it worked for me:

    let bar:UINavigationBar! =  self.navigationController?.navigationBar
    self.title = "Whatever..."
    bar.setBackgroundImage(UIImage(), forBarMetrics: UIBarMetrics.Default)
    bar.shadowImage = UIImage()
    bar.alpha = 0.0 

I guess that this code should answer your question:

use strict;
use warnings;

my @keys = qw/one two three two/;
my %hash;
for my $key (@keys)
{
    $hash{$key}++;
}

for my $key (keys %hash)
{
   print "$key: ", $hash{$key}, "\n";
}

Output:

three: 1
one: 1
two: 2

The iteration can be simplified to:

$hash{$_}++ for (@keys);

(See $_ in perlvar.) And you can even write something like this:

$hash{$_}++ or print "Found new value: $_.\n" for (@keys);

Which reports each key the first time it’s found.

here's my refactored version which accepts multiline/single as an option

   public string ShowDialog(string text, string caption, bool isMultiline = false, int formWidth = 300, int formHeight = 200)
        {
            var prompt = new Form
            {
                Width = formWidth,
                Height = isMultiline ? formHeight : formHeight - 70,
                FormBorderStyle = isMultiline ? FormBorderStyle.Sizable : FormBorderStyle.FixedSingle,
                Text = caption,
                StartPosition = FormStartPosition.CenterScreen,
                MaximizeBox = isMultiline
            };

            var textLabel = new Label
            {
                Left = 10,
                Padding = new Padding(0, 3, 0, 0),
                Text = text,
                Dock = DockStyle.Top
            };

            var textBox = new TextBox
            {
                Left = isMultiline ? 50 : 4,
                Top = isMultiline ? 50 : textLabel.Height + 4,
                Multiline = isMultiline,
                Dock = isMultiline ? DockStyle.Fill : DockStyle.None,
                Width = prompt.Width - 24,
                Anchor = isMultiline ? AnchorStyles.Left | AnchorStyles.Top : AnchorStyles.Left | AnchorStyles.Right
            };

            var confirmationButton = new Button
            {
                Text = @"OK",
                Cursor = Cursors.Hand,
                DialogResult = DialogResult.OK,
                Dock = DockStyle.Bottom,
            };

            confirmationButton.Click += (sender, e) =>
            {
                prompt.Close();
            };

            prompt.Controls.Add(textBox);
            prompt.Controls.Add(confirmationButton);
            prompt.Controls.Add(textLabel);

            return prompt.ShowDialog() == DialogResult.OK ? textBox.Text : string.Empty;
        }

<tbody *ngFor="let emp of $emps;let i=index">

<button (click)="deleteEmployee(i)">Delete</button></td>

and

deleteEmployee(i)
{
  this.$emps.splice(i,1);
}

How about this: location.href.slice(0, - ((location.search + location.hash).length))

I wanted to add a concrete example to accompany the other answers

You need to specify the name of the class that you want to test, so if you have the following project (this is a Play project):

You can test just the Login tests by running the following command from the SBT console:

test:testOnly *LoginServiceSpec

If you are running the command from outside the SBT console, you would do the following:

sbt "test:testOnly *LoginServiceSpec"

I had an issue using this in a user control (in a page this worked fine); the Button1 is inside an updatepanel, and the scriptmanager is on the usercontrol.

protected void Button1_Click(object sender, EventArgs e)  
{  
    string scriptstring = "alert('Welcome');";  
    ScriptManager.RegisterStartupScript(this, this.GetType(), "alertscript", scriptstring, true);  
}

Now it seems you have to be careful with the first two arguments, they need to reference your page, not your control

ScriptManager.RegisterStartupScript(this.Page, this.Page.GetType(), "alertscript", scriptstring, true);

Another reason to use merge is when using custom viewgroups in ListViews or GridViews. Instead of using the viewHolder pattern in a list adapter, you can use a custom view. The custom view would inflate an xml whose root is a merge tag. Code for adapter:

public class GridViewAdapter extends BaseAdapter {
     // ... typical Adapter class methods
     @Override
     public View getView(int position, View convertView, ViewGroup parent) {
        WallpaperView wallpaperView;
        if (convertView == null)
           wallpaperView = new WallpaperView(activity);
        else
            wallpaperView = (WallpaperView) convertView;

        wallpaperView.loadWallpaper(wallpapers.get(position), imageWidth);
        return wallpaperView;
    }
}

here is the custom viewgroup:

public class WallpaperView extends RelativeLayout {

    public WallpaperView(Context context) {
        super(context);
        init(context);
    }
    // ... typical constructors

    private void init(Context context) {
        View.inflate(context, R.layout.wallpaper_item, this);
        imageLoader = AppController.getInstance().getImageLoader();
        imagePlaceHolder = (ImageView) findViewById(R.id.imgLoader2);
        thumbnail = (NetworkImageView) findViewById(R.id.thumbnail2);
        thumbnail.setScaleType(ImageView.ScaleType.CENTER_CROP);
    }

    public void loadWallpaper(Wallpaper wallpaper, int imageWidth) {
        // ...some logic that sets the views
    }
}

and here is the XML:

<merge xmlns:android="http://schemas.android.com/apk/res/android">

    <ImageView
        android:id="@+id/imgLoader"
        android:layout_width="30dp"
        android:layout_height="30dp"
        android:layout_centerInParent="true"
        android:src="@drawable/ico_loader" />

    <com.android.volley.toolbox.NetworkImageView
        android:id="@+id/thumbnail"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content" />

</merge>

You can use findIndex to find the index in the array of the object and replace it as required:

var item = {...}
var items = [{id:2}, {id:2}, {id:2}];

var foundIndex = items.findIndex(x => x.id == item.id);
items[foundIndex] = item;

This assumes unique IDs. If your IDs are duplicated (as in your example), it's probably better if you use forEach:

items.forEach((element, index) => {
    if(element.id === item.id) {
        items[index] = item;
    }
});

First, import java.util.Calendar

Calendar now = Calendar.getInstance();
System.out.println(now.get(Calendar.HOUR_OF_DAY) + ":" + now.get(Calendar.MINUTE));

What this means is that you are trying to print out/output a value which is at least partially uninitialized. Can you narrow it down so that you know exactly what value that is? After that, trace through your code to see where it is being initialized. Chances are, you will see that it is not being fully initialized.

If you need more help, posting the relevant sections of source code might allow someone to offer more guidance.

EDIT

I see you've found the problem. Note that valgrind watches for Conditional jump or move based on unitialized variables. What that means is that it will only give out a warning if the execution of the program is altered due to the uninitialized value (ie. the program takes a different branch in an if statement, for example). Since the actual arithmetic did not involve a conditional jump or move, valgrind did not warn you of that. Instead, it propagated the "uninitialized" status to the result of the statement that used it.

It may seem counterintuitive that it does not warn you immediately, but as mark4o pointed out, it does this because uninitialized values get used in C all the time (examples: padding in structures, the realloc() call, etc.) so those warnings would not be very useful due to the false positive frequency.

The reject actually takes one parameter: that's the exception that occurred in your code that caused the promise to be rejected. So, when you call reject() the exception value is undefined, hence the "undefined" part in the error that you get.

You do not show the code that uses the promise, but I reckon it is something like this:

var promise = doSth();
promise.then(function() { doSthHere(); });

Try adding an empty failure call, like this:

promise.then(function() { doSthHere(); }, function() {});

This will prevent the error to appear.

However, I would consider calling reject only in case of an actual error, and also... having empty exception handlers isn't the best programming practice.

There are two types of drop down lists available (I am not sure since which version).

ActiveX Drop Down
You can set the column widths, so your hidden column can be set to 0.

Form Drop Down
You could set the drop down range to a hidden sheet and reference the cell adjacent to the selected item. This would also work with the ActiveX type control.

Not out of the box in Sql Server Management Studio, but it is a feature of the very good SSMS Tools Pack

More recent versions of IntelliJ (certainly WebStorm and PhpStorm) have made this change even easier by adding a Help >> Change Memory Settings menu item that opens a dialog where the memory limit can be set.

This error message is very confusing. I just fixed the other 'warnings' in my project and I really had only one (simple one):

warning C4101: 'i': unreferenced local variable

After I commented this unused i, and compiled it, the other error went away.

First, let's make some test data:

create table client (client_id integer not null primary key auto_increment,
                     name varchar(64));
create table portfolio (portfolio_id integer not null primary key auto_increment,
                        client_id integer references client.id,
                        cash decimal(10,2),
                        stocks decimal(10,2));
insert into client (name) values ('John Doe'), ('Jane Doe');
insert into portfolio (client_id, cash, stocks) values (1, 11.11, 22.22),
                                                       (1, 10.11, 23.22),
                                                       (2, 30.30, 40.40),
                                                       (2, 40.40, 50.50);

If you didn't need the portfolio ID, it would be easy:

select client_id, name, max(cash + stocks)
from client join portfolio using (client_id)
group by client_id

+-----------+----------+--------------------+
| client_id | name     | max(cash + stocks) |
+-----------+----------+--------------------+
|         1 | John Doe |              33.33 | 
|         2 | Jane Doe |              90.90 | 
+-----------+----------+--------------------+

Since you need the portfolio ID, things get more complicated. Let's do it in steps. First, we'll write a subquery that returns the maximal portfolio value for each client:

select client_id, max(cash + stocks) as maxtotal
from portfolio
group by client_id

+-----------+----------+
| client_id | maxtotal |
+-----------+----------+
|         1 |    33.33 | 
|         2 |    90.90 | 
+-----------+----------+

Then we'll query the portfolio table, but use a join to the previous subquery in order to keep only those portfolios the total value of which is the maximal for the client:

 select portfolio_id, cash + stocks from portfolio 
 join (select client_id, max(cash + stocks) as maxtotal 
       from portfolio
       group by client_id) as maxima
 using (client_id)
 where cash + stocks = maxtotal

+--------------+---------------+
| portfolio_id | cash + stocks |
+--------------+---------------+
|            5 |         33.33 | 
|            6 |         33.33 | 
|            8 |         90.90 | 
+--------------+---------------+

Finally, we can join to the client table (as you did) in order to include the name of each client:

select client_id, name, portfolio_id, cash + stocks
from client
join portfolio using (client_id)
join (select client_id, max(cash + stocks) as maxtotal
      from portfolio 
      group by client_id) as maxima
using (client_id)
where cash + stocks = maxtotal

+-----------+----------+--------------+---------------+
| client_id | name     | portfolio_id | cash + stocks |
+-----------+----------+--------------+---------------+
|         1 | John Doe |            5 |         33.33 | 
|         1 | John Doe |            6 |         33.33 | 
|         2 | Jane Doe |            8 |         90.90 | 
+-----------+----------+--------------+---------------+

Note that this returns two rows for John Doe because he has two portfolios with the exact same total value. To avoid this and pick an arbitrary top portfolio, tag on a GROUP BY clause:

select client_id, name, portfolio_id, cash + stocks
from client
join portfolio using (client_id)
join (select client_id, max(cash + stocks) as maxtotal
      from portfolio 
      group by client_id) as maxima
using (client_id)
where cash + stocks = maxtotal
group by client_id, cash + stocks

+-----------+----------+--------------+---------------+
| client_id | name     | portfolio_id | cash + stocks |
+-----------+----------+--------------+---------------+
|         1 | John Doe |            5 |         33.33 | 
|         2 | Jane Doe |            8 |         90.90 | 
+-----------+----------+--------------+---------------+

For those who use Google Guava:

import com.google.common.html.HtmlEscapers;
[...]
String source = "The less than sign (<) and ampersand (&) must be escaped before using them in HTML";
String escaped = HtmlEscapers.htmlEscaper().escape(source);

I saw all of the answers which are appropriate only for a single activity but there is my solution which will block screenshot for all of the activities without adding any code to the activity. First of all make an Custom Application class and add a registerActivityLifecycleCallbacks.Then register it in your manifest.

MyApplicationContext.class

public class MyApplicationContext extends Application {
    private  Context context;
    public void onCreate() {
        super.onCreate();
        context = getApplicationContext();
        setupActivityListener();
    }

    private void setupActivityListener() {
        registerActivityLifecycleCallbacks(new ActivityLifecycleCallbacks() {
            @Override
            public void onActivityCreated(Activity activity, Bundle savedInstanceState) {
                activity.getWindow().setFlags(WindowManager.LayoutParams.FLAG_SECURE, WindowManager.LayoutParams.FLAG_SECURE);            }
            @Override
            public void onActivityStarted(Activity activity) {
            }
            @Override
            public void onActivityResumed(Activity activity) {

            }
            @Override
            public void onActivityPaused(Activity activity) {

            }
            @Override
            public void onActivityStopped(Activity activity) {
            }
            @Override
            public void onActivitySaveInstanceState(Activity activity, Bundle outState) {
            }
            @Override
            public void onActivityDestroyed(Activity activity) {
            }
        });
    }



}

Manifest

 <application
        android:name=".MyApplicationContext"
        android:allowBackup="true"
        android:icon="@mipmap/ic_launcher"
        android:label="@string/app_name"
        android:roundIcon="@mipmap/ic_launcher_round"
        android:supportsRtl="true"
        android:theme="@style/AppTheme">

The easiest way to do it in Python 3.5 and higher is:

>>> 'halo'.encode().hex()
'68616c6f'

If you manually enter a string into a Python Interpreter using the utf-8 characters, you can do it even faster by typing b before the string:

>>> b'halo'.hex()
'68616c6f'

Equivalent in Python 2.x:

>>> 'halo'.encode('hex')
'68616c6f'

1. You need

   @ManagedBean(name="userBean")

2. Make sure you have getUser() method.

3. Type of setUser() method should be void.

4. Make sure that User class has proper setters and getters as well.

According to uber-JAR Documentation Approaches: There are three common methods for constructing an uber-JAR:

Unshaded Unpack all JAR files, then repack them into a single JAR. Tools: Maven Assembly Plugin, Classworlds Uberjar

Shaded Same as unshaded, but rename (i.e., "shade") all packages of all dependencies. Tools: Maven Shade Plugin

JAR of JARs The final JAR file contains the other JAR files embedded within. Tools: Eclipse JAR File Exporter, One-JAR.

Incase you don't want to use nextint, you can also use buffered reader, where using inputstream and readline function read the string.

A) Run gradle dependencies or ./gradlew dependencies

B) Look at your tree and figure out which of your dependencies is specifying a different support library version for a dependency you don't control.

I didn't realize that this warning also displays if the dependency is completely unused directly by your own code. In my case, Facebook specifies some support libs I wasn't using, you can see below most of those dependencies were overridden by my own specification of 25.2.0, denoted by the -> X.X.X (*) symbols. The card view and custom tabs libs weren't overridden by anyone, so I need to ask for 25.2.0 for those ones myself even though I don't use them.

+--- com.facebook.android:facebook-android-sdk:4.17.0
|    +--- com.android.support:support-v4:25.0.0 -> 25.2.0 (*)
|    +--- com.android.support:appcompat-v7:25.0.0 -> 25.2.0 (*)
|    +--- com.android.support:cardview-v7:25.0.0
|    |    \--- com.android.support:support-annotations:25.0.0 -> 25.2.0
|    +--- com.android.support:customtabs:25.0.0
|    |    +--- com.android.support:support-compat:25.0.0 -> 25.2.0 (*)
|    |    \--- com.android.support:support-annotations:25.0.0 -> 25.2.0
|    \--- com.parse.bolts:bolts-android:1.4.0 (*)

If gradle has already warned you and given you examples...

Examples include com.android.support:animated-vector-drawable:25.1.1 and com.android.support:mediarouter-v7:24.0.0

... it's even easier if you throw in some grep highlighting for the lower version since gradle dependencies can be quite verbose:

./gradlew dependencies | grep --color -E 'com.android.support:mediarouter-v7|$'

email validation

import re
def validate(email): 
    match=re.search(r"(^[a-zA-Z0-9_.+-]+@[a-zA-Z0-9]+\.[a-zA-Z0-9.]*\.*[com|org|edu]{3}$)",email)
    if match:
        return 'Valid email.'
    else:
        return 'Invalid email.'

Regarding NSNotificationCenter Post above (sorry can't find out where to post a comment under it...)

In case some were getting the -[NSConcreteNotification allKeys] error of sorts. Change this:

-(void)didReceiveRemoteNotification:(NSDictionary *)userInfo

to this:

-(void)didReceiveRemoteNotification:(NSNotification*)notif {
NSDictionary *dict = notif.userInfo;
}

The syntax you're looking for:

lambda x: True if x % 2 == 0 else False

But you can't use print or raise in a lambda.

You have to remove your colspan and the number of th and td needs to match.

You will have to use Array.find or Array.filter or Array.forEach.

Since you value is array and you need position of element, you will have to iterate over it.

Array.find

var data = [{"name":"placeHolder","section":"right"},{"name":"Overview","section":"left"},{"name":"ByFunction","section":"left"},{"name":"Time","section":"left"},{"name":"allFit","section":"left"},{"name":"allbMatches","section":"left"},{"name":"allOffers","section":"left"},{"name":"allInterests","section":"left"},{"name":"allResponses","section":"left"},{"name":"divChanged","section":"right"}];
var index = -1;
var val = "allInterests"
var filteredObj = data.find(function(item, i){
  if(item.name === val){
    index = i;
    return i;
  }
});

console.log(index, filteredObj);

Array.findIndex() @Ted Hopp's suggestion

var data = [{"name":"placeHolder","section":"right"},{"name":"Overview","section":"left"},{"name":"ByFunction","section":"left"},{"name":"Time","section":"left"},{"name":"allFit","section":"left"},{"name":"allbMatches","section":"left"},{"name":"allOffers","section":"left"},{"name":"allInterests","section":"left"},{"name":"allResponses","section":"left"},{"name":"divChanged","section":"right"}];

var val = "allInterests"
var index = data.findIndex(function(item, i){
  return item.name === val
});

console.log(index);

Default Array.indexOf() will match searchValue to current element and not its properties. You can refer Array.indexOf - polyfill on MDN

All of them need to be vertically aligned within the div

Aligned how? Tops of the images aligned with the top of the text?

One of the images needs to be absolute positioned within the div.

Absolutely positioned relative to the DIV? Perhaps you could sketch out what you're looking for...?

fd has described the steps for absolute positioning, as well as adjusting the display of the H1 element such that images will appear inline with it. To that, i'll add that you can align the images by use of the vertical-align style:

#header h1 { display: inline; }
#header img { vertical-align: middle; }

...this would put the header and images together, with top edges aligned. Other alignment options exist; see the documentation. You might also find it beneficial to drop the DIV and move the images inside the H1 element - this provides semantic value to the container, and removes the need to adjust the display of the H1:

<h1 id=header">
   <img src=".." ></img>
   testing...
   <img src="..."></img>
</h1>

Another possibility is to use regular expressions which is what Perl is famous for:

if ($mystring =~ /s1\.domain\.com/) {
   print qq("$mystring" contains "s1.domain.com"\n);
}

The backslashes are needed because a . can match any character. You can get around this by using the \Q and \E operators.

my $substring = "s1.domain.com";
    if ($mystring =~ /\Q$substring\E/) {
   print qq("$mystring" contains "$substring"\n);
}

Or, you can do as eugene y stated and use the index function. Just a word of warning: Index returns a -1 when it can't find a match instead of an undef or 0.

Thus, this is an error:

my $substring = "s1.domain.com";
if (not index($mystring, $substr)) {
    print qq("$mystring" doesn't contains "$substring"\n";
} 

This will be wrong if s1.domain.com is at the beginning of your string. I've personally been burned on this more than once.

Use the JavaScript RegExp object constructor.

var re = new RegExp("\\w+");
re.test("hello");

You can pass flags as a second string argument to the constructor. See the documentation for details.

Just select the code and

• on Windows do Ctrl + Alt + L

• on Linux do Ctrl + Windows Key + Alt + L

• on Mac do CMD + Option + L

If your variable is used only within the context of a single function, you're better off using a stack variable, i.e., Option 2. As others have said, you do not have to manage the lifetime of stack variables - they are constructed and destructed automatically. Also, allocating/deallocating a variable on the heap is slow by comparison. If your function is called often enough, you'll see a tremendous performance improvement if use stack variables versus heap variables.

That said, there are a couple of obvious instances where stack variables are insufficient.

If the stack variable has a large memory footprint, then you run the risk of overflowing the stack. By default, the stack size of each thread is 1 MB on Windows. It is unlikely that you'll create a stack variable that is 1 MB in size, but you have to keep in mind that stack utilization is cumulative. If your function calls a function which calls another function which calls another function which..., the stack variables in all of these functions take up space on the same stack. Recursive functions can run into this problem quickly, depending on how deep the recursion is. If this is a problem, you can increase the size of the stack (not recommended) or allocate the variable on the heap using the new operator (recommended).

The other, more likely condition is that your variable needs to "live" beyond the scope of your function. In this case, you'd allocate the variable on the heap so that it can be reached outside the scope of any given function.

Short answer: 400-800 pixels.

What I have read is that HTML newsletter width should be as narrow as possible without being too narrow. For instance, 400-500 pixels for a one column layout is a lower limit. Any less may look too weird.

Today's widescreen monitors allow for more horizontal pixels and most web email clients will either be of the two-column variety (Gmail) or 3-pane layout where the content window bellow the inbox list (Hotmail and Yahoo). In either case, you can be okay with 800 pixels if you're targeting the 1280 wide audience. An older or less technical audience may have older, square monitors.

There is the problem of Outlook having a three-column layout. That limits the width of your email even more. With them, you may want to go even narrower.

I just recently created a template that required an ad banner that is 730 pixels wide. It was near in the wide range, but not so much that most people could not double-click the email an open a new window in Outlook (the web email users should be okay for the most part).

Hope this advice helps.

When you mark your method as @Transactional, occurrence of any exception inside your method will mark the surrounding TX as roll-back only (even if you catch them). You can use other attributes of @Transactional annotation to prevent it of rolling back like:

@Transactional(rollbackFor=MyException.class, noRollbackFor=MyException2.class)

Create your own container:

template <class T>
class statList : public std::list<T>
{
    public:
        statList() : std::list<T>::list() {}
        ~statList() {}
        T mean() {
           return accumulate(begin(),end(),0.0)/size();
        }
        T stddev() {
           T diff_sum = 0;
           T m = mean();
           for(iterator it= begin(); it != end(); ++it)
               diff_sum += ((*it - m)*(*it -m));
           return diff_sum/size();
        }
};

It does have some limitations, but it works beautifully when you know what you are doing.

ok guys you are not going to believe me how easy it is, so i putted a video on YouTube to show you that [ click here ]

now , steps :

1. run your xampp control panel
2. click the button saying config
3. select apache( httpd.conf )
4. find document root
5. replace

DocumentRoot "C:/xampp/htdocs" <Directory "C:/xampp/htdocs">

those 2 lines || C:/xampp/htdocs == current location for root || change C:/xampp/htdocs with any location you want

6. save it DONE: start apache and go to the localhost see in action [ watch video click here ]

Here's an easier way:

sudo apt-get install maven

More details are here.

at and operator[] both return a reference to the indexed element, so you can simply use:

l.at(4) = -1;

or

l[4] = -1;

@choz answer is the correct way. If you have many usages and want to make sure it works everywhere without changes you can add these small migration-snippet:

/* Migration jQuery from 1.8 to 3.x */
jQuery.fn.load = function (callback) {
    var el = $(this);

    el.on('load', callback);

    return el;
};

In this case you got no erros on other nodes e.g. on $image like in @Korsmakolnikov answer!

const $image = $('img.image').load(function() {
  $(this).doSomething();
});

$image.doSomethingElseWithTheImage();

Here is my solution:

import (
    "bytes"
    "encoding/json"
)

const (
    empty = ""
    tab   = "\t"
)

func PrettyJson(data interface{}) (string, error) {
    buffer := new(bytes.Buffer)
    encoder := json.NewEncoder(buffer)
    encoder.SetIndent(empty, tab)

    err := encoder.Encode(data)
    if err != nil {
       return empty, err
    }
    return buffer.String(), nil
}

add this code in your page index

<link rel="icon" 
      type="image/png" 
      href="http://example.com/myicon.png">

Perhaps this information will help you.

var sitePersonel = {};_x000D_
var employees = []_x000D_
sitePersonel.employees = employees;_x000D_
console.log(sitePersonel);_x000D_
_x000D_
var firstName = "John";_x000D_
var lastName = "Smith";_x000D_
var employee = {_x000D_
  "firstName": firstName,_x000D_
  "lastName": lastName_x000D_
}_x000D_
sitePersonel.employees.push(employee);_x000D_
console.log(sitePersonel);_x000D_
_x000D_
var manager = "Jane Doe";_x000D_
sitePersonel.employees[0].manager = manager;_x000D_
console.log(sitePersonel);_x000D_
_x000D_
console.log(JSON.stringify(sitePersonel));

Use an overload of rfind which has the pos parameter:

std::string s = "tititoto";
if (s.rfind("titi", 0) == 0) {
  // s starts with prefix
}

Who needs anything else? Pure STL!

Many have misread this to mean "search backwards through the whole string looking for the prefix". That would give the wrong result (e.g. string("tititito").rfind("titi") returns 2 so when compared against == 0 would return false) and it would be inefficient (looking through the whole string instead of just the start). But it does not do that because it passes the pos parameter as 0, which limits the search to only match at that position or earlier. For example:

std::string test = "0123123";
size_t match1 = test.rfind("123");    // returns 4 (rightmost match)
size_t match2 = test.rfind("123", 2); // returns 1 (skipped over later match)
size_t match3 = test.rfind("123", 0); // returns std::string::npos (i.e. not found)

I might be too late to answer this question, but wanted to share my input for the benefit of the community. For this example, let me call your matrix 'ANOVA', and I am assuming you're just trying to remove rows from this matrix with 0's only in the 5th column.

indx = []
for i in range(len(ANOVA)):
    if int(ANOVA[i,4]) == int(0):
        indx.append(i)

ANOVA = [x for x in ANOVA if not x in indx]

Firstly you need to add a where T:class constraint - you can't call GetValue on value types unless they're passed by ref.

Secondly GetValue is very slow and gets called a lot.

To get round this we can create a delegate and call that instead:

MethodInfo method = property.GetGetMethod(true);
Delegate.CreateDelegate(typeof(Func<TClass, TProperty>), method );

The problem is that we don't know TProperty, but as usual on here Jon Skeet has the answer - we can use reflection to retrieve the getter delegate, but once we have it we don't need to reflect again:

public class ReflectionUtility
{
    internal static Func<object, object> GetGetter(PropertyInfo property)
    {
        // get the get method for the property
        MethodInfo method = property.GetGetMethod(true);

        // get the generic get-method generator (ReflectionUtility.GetSetterHelper<TTarget, TValue>)
        MethodInfo genericHelper = typeof(ReflectionUtility).GetMethod(
            "GetGetterHelper",
            BindingFlags.Static | BindingFlags.NonPublic);

        // reflection call to the generic get-method generator to generate the type arguments
        MethodInfo constructedHelper = genericHelper.MakeGenericMethod(
            method.DeclaringType,
            method.ReturnType);

        // now call it. The null argument is because it's a static method.
        object ret = constructedHelper.Invoke(null, new object[] { method });

        // cast the result to the action delegate and return it
        return (Func<object, object>) ret;
    }

    static Func<object, object> GetGetterHelper<TTarget, TResult>(MethodInfo method)
        where TTarget : class // target must be a class as property sets on structs need a ref param
    {
        // Convert the slow MethodInfo into a fast, strongly typed, open delegate
        Func<TTarget, TResult> func = (Func<TTarget, TResult>) Delegate.CreateDelegate(typeof(Func<TTarget, TResult>), method);

        // Now create a more weakly typed delegate which will call the strongly typed one
        Func<object, object> ret = (object target) => (TResult) func((TTarget) target);
        return ret;
    }
}

So now your method becomes:

public static DataTable ToDataTable<T>(this IEnumerable<T> items) 
    where T: class
{  
    // ... create table the same way

    var propGetters = new List<Func<T, object>>();
foreach (var prop in props)
    {
        Func<T, object> func = (Func<T, object>) ReflectionUtility.GetGetter(prop);
        propGetters.Add(func);
    }

    // Add the property values per T as rows to the datatable
    foreach (var item in items) 
    {  
        var values = new object[props.Length];  
        for (var i = 0; i < props.Length; i++) 
        {
            //values[i] = props[i].GetValue(item, null);   
            values[i] = propGetters[i](item);
        }    

        table.Rows.Add(values);  
    } 

    return table; 
} 

You could further optimise it by storing the getters for each type in a static dictionary, then you will only have the reflection overhead once for each type.

This can be used to merge any number of files specified on the command:

jq -rs 'reduce .[] as $item ({}; . * $item)' file1.json file2.json file3.json ... file10.json

or this for any number of files

jq -rs 'reduce .[] as $item ({}; . * $item)' ./*.json

Yes it stops execution so this is generally preferable to HAVING COUNT(*) > 0 which often won't.

With EXISTS if you look at the execution plan you will see that the actual number of rows coming out of table1 will not be more than 1 irrespective of number of matching records.

In some circumstances SQL Server can convert the tree for the COUNT query to the same as the one for EXISTS during the simplification phase (with a semi join and no aggregate operator in sight) an example of that is discussed in the comments here.

For more complicated sub trees than shown in the question you may occasionally find the COUNT performs better than EXISTS however. Because the semi join needs only retrieve one row from the sub tree this can encourage a plan with nested loops for that part of the tree - which may not work out optimal in practice.

mFragmentFavorite in your code is a FragmentActivity which is not the same thing as a Fragment. That's why you're getting the type mismatch. Also, you should never call new on an Activity as that is not the proper way to start one.

If you want to start a new instance of mFragmentFavorite, you can do so via an Intent.

From a Fragment:

Intent intent = new Intent(getActivity(), mFragmentFavorite.class);
startActivity(intent);

From an Activity

Intent intent = new Intent(this, mFragmentFavorite.class);
startActivity(intent);

If you want to start aFavorite instead of mFragmentFavorite then you only need to change out their names in the created Intent.

Also, I recommend changing your class names to be more accurate. Calling something mFragmentFavorite is improper in that it's not a Fragment at all. Also, class declarations in Java typically start with a capital letter. You'd do well to name your class something like FavoriteActivity to be more accurate and conform to the language conventions. You will also need to rename the file to FavoriteActivity.java if you choose to do this since Java requires class names match the file name.

UPDATE

Also, it looks like you actually meant formFragmentFavorite to be a Fragment instead of a FragmentActivity based on your use of onCreateView. If you want mFragmentFavorite to be a Fragment then change the following line of code:

public class mFragmentFavorite extends FragmentActivity{

Make this instead read:

public class mFragmentFavorite extends Fragment {

Normaly you can GET and POST parameters in a servlet the same way:

request.getParameter("cmd");

But only if the POST data is encoded as key-value pairs of content type: "application/x-www-form-urlencoded" like when you use a standard HTML form.

If you use a different encoding schema for your post data, as in your case when you post a json data stream, you need to use a custom decoder that can process the raw datastream from:

BufferedReader reader = request.getReader();

Json post processing example (uses org.json package )

public void doPost(HttpServletRequest request, HttpServletResponse response)
  throws ServletException, IOException {

  StringBuffer jb = new StringBuffer();
  String line = null;
  try {
    BufferedReader reader = request.getReader();
    while ((line = reader.readLine()) != null)
      jb.append(line);
  } catch (Exception e) { /*report an error*/ }

  try {
    JSONObject jsonObject =  HTTP.toJSONObject(jb.toString());
  } catch (JSONException e) {
    // crash and burn
    throw new IOException("Error parsing JSON request string");
  }

  // Work with the data using methods like...
  // int someInt = jsonObject.getInt("intParamName");
  // String someString = jsonObject.getString("stringParamName");
  // JSONObject nestedObj = jsonObject.getJSONObject("nestedObjName");
  // JSONArray arr = jsonObject.getJSONArray("arrayParamName");
  // etc...
}

Just for the records you can also define your object in the controller like this:

this.styleDiv = {color: '', backgroundColor:'', backgroundImage : '' };

and then you can define a function to change the property of the object directly:

this.changeBackgroundImage = function (){
        this.styleDiv.backgroundImage = 'url('+this.backgroundImage+')';
    }

Doing it in that way you can modify dinamicaly your style.

An addition to the other answers concerning object comparison:

== compares objects using the name of the object and their values. If two objects are of the same type and have the same member values, $a == $b yields true.

=== compares the internal object id of the objects. Even if the members are equal, $a !== $b if they are not exactly the same object.

class TestClassA {
    public $a;
}

class TestClassB {
    public $a;
}

$a1 = new TestClassA();
$a2 = new TestClassA();
$b = new TestClassB();

$a1->a = 10;
$a2->a = 10;
$b->a = 10;

$a1 == $a1;
$a1 == $a2;  // Same members
$a1 != $b;   // Different classes

$a1 === $a1;
$a1 !== $a2; // Not the same object

What gives? It works. Just ignore it:

@SuppressWarnings("unchecked")

No, you cannot parameterize it. I'd however rather use a List<Map<K, V>> instead.

List<Map<String, String>> listOfMaps = new ArrayList<Map<String, String>>();

To learn more about collections and maps, have a look at this tutorial.

That's simple. It's explained in man bash:

/bin/bash
       The bash executable
/etc/profile
       The systemwide initialization file, executed for login shells
~/.bash_profile
       The personal initialization file, executed for login shells
~/.bashrc
       The individual per-interactive-shell startup file
~/.bash_logout
       The individual login shell cleanup file, executed when a login shell exits
~/.inputrc
       Individual readline initialization file

Login shells are the ones that are read one you login (so, they are not executed when merely starting up xterm, for example). There are other ways to login. For example using an X display manager. Those have other ways to read and export environment variables at login time.

Also read the INVOCATION chapter in the manual. It says "The following paragraphs describe how bash executes its startup files.", i think that's a spot-on :) It explains what an "interactive" shell is too.

Bash does not know about .environment. I suspect that's a file of your distribution, to set environment variables independent of the shell that you drive.

Performance-wise it's the same as a named method. The big problem is when you do the following:

MyButton.Click -= (o, i) => 
{ 
    //snip 
} 

It will probably try to remove a different lambda, leaving the original one there. So the lesson is that it's fine unless you also want to be able to remove the handler.

This is answered in the comments; package-lock.json is a feature in npm v5 and higher. npm shrinkwrap is how you create a lockfile in all versions of npm.

You can build a Rest API or a restful project using ASP.NET MVC and return data as a JSON. An example controller function would be:

        public JsonpResult GetUsers(string userIds)
        {
           var values = JsonConvert.DeserializeObject<List<int>>(userIds);

            var users = _userRepository.GetAllUsersByIds(userIds);

            var collection = users.Select(user => new { id = user.Id, fullname = user.FirstName +" "+ user.LastName });
            var result = new { users = collection };

            return this.Jsonp(result);
        }
        public IQueryable<User> GetAllUsersByIds(List<int> ids)
        {
            return _db.Users.Where(c=> ids.Contains(c.Id));
        }

Then you just call the GetUsers function via a regular AJAX function supplying the array of Ids(in this case I am using jQuery stringify to send the array as string and dematerialize it back in the controller but you can just send the array of ints and receive it as an array of int's in the controller). I've build an entire Restful API using ASP.NET MVC that returns the data as cross domain json and that can be used from any app. That of course if you can use ASP.NET MVC.

function GetUsers()
    {
           var link = '<%= ResolveUrl("~")%>users?callback=?';
           var userIds = [];
            $('#multiselect :selected').each(function (i, selected) {
                userIds[i] = $(selected).val();
            });

            $.ajax({
                url: link,
                traditional: true,
                data: { 'userIds': JSON.stringify(userIds) },
                dataType: "jsonp",
                jsonpCallback: "refreshUsers"
            });
    }

// if you want to hide back button use below code

class SecondScreen extends StatelessWidget {
@override
Widget build(BuildContext context) {
return Scaffold(
  appBar: AppBar(
    title: Text('Remove Back Button'),
    
    //hide back button
    automaticallyImplyLeading: false,
   ),
  body: Center(
    child: Container(),
  ),
);
}
}

// if you want to hide back button and stop the pop action use below code

class SecondScreen extends StatelessWidget {

@override
Widget build(BuildContext context) {
 return new WillPopScope(

  onWillPop: () async => false,
  child: Scaffold(
    appBar: AppBar(
      title: Text("Second Screen"),
      //For hide back button
      automaticallyImplyLeading: false,
    ),
    body: Center(
        child: Column(
          mainAxisAlignment: MainAxisAlignment.center,
          crossAxisAlignment: CrossAxisAlignment.center,
          children: <Widget>[
            RaisedButton(
              child: Text('Back'),
              onPressed: () {
                Navigator.pop(context);
              },
            ),
          ],
        )
    ),
  ),
);
 }

This can help you

namedWindow( "Display window", CV_WINDOW_AUTOSIZE );// Create a window for display.
imshow( "Display window", image );                   // Show our image inside it.

I had the same issue and it turns out there was an error in the directory of the file I was trying to serve instead of:

app.use(express.static(__dirname + '/../dist'));

I had :

app.use(express.static('./dist'));

You could use THROW (available in SQL Server 2012+):

THROW 50000, 'Your custom error message', 1
THROW <error_number>, <message>, <state>

MSDN THROW (Transact-SQL)

Differences Between RAISERROR and THROW in Sql Server

Commercial, but CodeSmith Generator does that: http://www.codesmithtools.com/product/generator

In Addition to @thefourtheye answer, using predicate instead of traditional anonymous functions:

  _.remove(obj.subTopics, (currentObject) => {
        return currentObject.subTopicId === stToDelete;
    });

OR

obj.subTopics = _.filter(obj.subTopics, (currentObject) => {
    return currentObject.subTopicId !== stToDelete;
});

You can use a subquery:

SELECT *
FROM terms
WHERE id IN (SELECT term_id FROM terms_relation WHERE taxonomy='categ');

and if you need to show all columns from both tables:

SELECT t.*, tr.*
FROM terms t, terms_relation tr
WHERE t.id = tr.term_id
AND tr.taxonomy='categ'

You can do this:

df.rename(columns={ df.columns[1]: "whatever" })

Use GNU parted and print free command:

root@sandbox:~# parted
GNU Parted 2.3
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print free
Model: VMware Virtual disk (scsi)
Disk /dev/sda: 64.4GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system  Flags
        32.3kB  1049kB  1016kB            Free Space
 1      1049kB  256MB   255MB   primary   ext2         boot
        256MB   257MB   1048kB            Free Space
 2      257MB   64.4GB  64.2GB  extended
 5      257MB   64.4GB  64.2GB  logical                lvm
        64.4GB  64.4GB  1049kB            Free Space

From msdn

When you created the project, you made the wrong choice of application type. When asked whether your project was a console application or a windows application or a DLL or a static library, you made the wrong chose windows application (wrong choice).

Go back, start over again, go to File -> New -> Project -> Win32 Console Application -> name your app -> click next -> click application settings.

For the application type, make sure Console Application is selected (this step is the vital step).

The main for a windows application is called WinMain, for a DLL is called DllMain, for a .NET application is called Main(cli::array ^), and a static library doesn't have a main. Only in a console app is main called main

If you have a SSHClient, you can also use open_sftp():

import paramiko


# lets say you have SSH client...
client = paramiko.SSHClient()

sftp = client.open_sftp()

# then you can use upload & download as shown above
...

I have different approach if you want access token and make call to other resource system with access token in header

Spring Security comes with automatic security: oauth2 properties access from application.yml file for every request and every request has SESSIONID which it reads and pull user info via Principal, so you need to make sure inject Principal in OAuthUser and get accessToken and make call to resource server

This is your application.yml, change according to your auth server:

security:
  oauth2:
    client:
      clientId: 233668646673605
      clientSecret: 33b17e044ee6a4fa383f46ec6e28ea1d
      accessTokenUri: https://graph.facebook.com/oauth/access_token
      userAuthorizationUri: https://www.facebook.com/dialog/oauth
      tokenName: oauth_token
      authenticationScheme: query
      clientAuthenticationScheme: form
    resource:
      userInfoUri: https://graph.facebook.com/me

@Component
public class OAuthUser implements Serializable {

private static final long serialVersionUID = 1L;

private String authority;

@JsonIgnore
private String clientId;

@JsonIgnore
private String grantType;
private boolean isAuthenticated;
private Map<String, Object> userDetail = new LinkedHashMap<String, Object>();

@JsonIgnore
private String sessionId;

@JsonIgnore
private String tokenType;

@JsonIgnore
private String accessToken;

@JsonIgnore
private Principal principal;

public void setOAuthUser(Principal principal) {
    this.principal = principal;
    init();
}

public Principal getPrincipal() {
    return principal;
}

private void init() {
    if (principal != null) {
        OAuth2Authentication oAuth2Authentication = (OAuth2Authentication) principal;
        if (oAuth2Authentication != null) {
            for (GrantedAuthority ga : oAuth2Authentication.getAuthorities()) {
                setAuthority(ga.getAuthority());
            }
            setClientId(oAuth2Authentication.getOAuth2Request().getClientId());
            setGrantType(oAuth2Authentication.getOAuth2Request().getGrantType());
            setAuthenticated(oAuth2Authentication.getUserAuthentication().isAuthenticated());

            OAuth2AuthenticationDetails oAuth2AuthenticationDetails = (OAuth2AuthenticationDetails) oAuth2Authentication
                    .getDetails();
            if (oAuth2AuthenticationDetails != null) {
                setSessionId(oAuth2AuthenticationDetails.getSessionId());
                setTokenType(oAuth2AuthenticationDetails.getTokenType());

            // This is what you will be looking for 
                setAccessToken(oAuth2AuthenticationDetails.getTokenValue());
            }

    // This detail is more related to Logged-in User
            UsernamePasswordAuthenticationToken userAuthenticationToken = (UsernamePasswordAuthenticationToken) oAuth2Authentication.getUserAuthentication();
            if (userAuthenticationToken != null) {
                LinkedHashMap<String, Object> detailMap = (LinkedHashMap<String, Object>) userAuthenticationToken.getDetails();
                if (detailMap != null) {
                    for (Map.Entry<String, Object> mapEntry : detailMap.entrySet()) {
                        //System.out.println("#### detail Key = " + mapEntry.getKey());
                        //System.out.println("#### detail Value = " + mapEntry.getValue());
                        getUserDetail().put(mapEntry.getKey(), mapEntry.getValue());
                    }

                }

            }

        }

    }
}


public String getAuthority() {
    return authority;
}

public void setAuthority(String authority) {
    this.authority = authority;
}

public String getClientId() {
    return clientId;
}

public void setClientId(String clientId) {
    this.clientId = clientId;
}

public String getGrantType() {
    return grantType;
}

public void setGrantType(String grantType) {
    this.grantType = grantType;
}

public boolean isAuthenticated() {
    return isAuthenticated;
}

public void setAuthenticated(boolean isAuthenticated) {
    this.isAuthenticated = isAuthenticated;
}

public Map<String, Object> getUserDetail() {
    return userDetail;
}

public void setUserDetail(Map<String, Object> userDetail) {
    this.userDetail = userDetail;
}

public String getSessionId() {
    return sessionId;
}

public void setSessionId(String sessionId) {
    this.sessionId = sessionId;
}

public String getTokenType() {
    return tokenType;
}

public void setTokenType(String tokenType) {
    this.tokenType = tokenType;
}

public String getAccessToken() {
    return accessToken;
}

public void setAccessToken(String accessToken) {
    this.accessToken = accessToken;
}

@Override
public String toString() {
    return "OAuthUser [clientId=" + clientId + ", grantType=" + grantType + ", isAuthenticated=" + isAuthenticated
            + ", userDetail=" + userDetail + ", sessionId=" + sessionId + ", tokenType="
            + tokenType + ", accessToken= " + accessToken + " ]";
}

@RestController
public class YourController {

@Autowired
OAuthUser oAuthUser;

// In case if you want to see Profile of user then you this 
@RequestMapping(value = "/profile", produces = MediaType.APPLICATION_JSON_VALUE)
public OAuthUser user(Principal principal) {
    oAuthUser.setOAuthUser(principal);

    // System.out.println("#### Inside user() - oAuthUser.toString() = " + oAuthUser.toString());

    return oAuthUser;
}


@RequestMapping(value = "/createOrder",
        method = RequestMethod.POST,
        headers = {"Content-type=application/json"},
        consumes = MediaType.APPLICATION_JSON_VALUE,
        produces = MediaType.APPLICATION_JSON_VALUE)
public FinalOrderDetail createOrder(@RequestBody CreateOrder createOrder) {

    return postCreateOrder_restTemplate(createOrder, oAuthUser).getBody();
}


private ResponseEntity<String> postCreateOrder_restTemplate(CreateOrder createOrder, OAuthUser oAuthUser) {

String url_POST = "your post url goes here";

    MultiValueMap<String, String> headers = new LinkedMultiValueMap<>();
    headers.add("Authorization", String.format("%s %s", oAuthUser.getTokenType(), oAuthUser.getAccessToken()));
    headers.add("Content-Type", "application/json");

    RestTemplate restTemplate = new RestTemplate();
    //restTemplate.getMessageConverters().add(new MappingJackson2HttpMessageConverter());

    HttpEntity<String> request = new HttpEntity<String>(createOrder, headers);

    ResponseEntity<String> result = restTemplate.exchange(url_POST, HttpMethod.POST, request, String.class);
    System.out.println("#### post response = " + result);

    return result;
}


}

I am using following code to decode base64 string in node API nodejs version 10.7.0

let data = 'c3RhY2thYnVzZS5jb20=';  // Base64 string
let buff = new Buffer(data, 'base64');  //Buffer
let text = buff.toString('ascii');  //this is the data type that you want your Base64 data to convert to
console.log('"' + data + '" converted from Base64 to ASCII is "' + text + '"'); 

Please don't try to run above code in console of the browser, won't work. Put the code in server side files of nodejs. I am using above line code in API development.

You can also restrict your action to just one class using the right pointed bracket (">"), as I have done in this code:

<!DOCTYPE html>
<html lang="en">
<head>
  <meta charset="UTF-8">
  <title>Document</title>
  <style type="text/css">
    span {
    font-size:12px;
    }
    a {
        color:green;
    }
    .test1>a:hover span {
        display:none;
    }
    .test1>a:hover:before {
        color:red;
        content:"Apple";
    }
  </style>
</head>

<body>
  <div class="test1">
    <a href="#"><span>Google</span></a>
  </div>
  <div class="test2">
    <a href="#"><span>Apple</span></a>
  </div>
</body>

</html>

Note: The hover:before switch works only on the .test1 class

Building on Rampant Creative Group's solution above, I was using jQuery to change the background image of the body tag:

e.g.

$('body').css({'background': 'url(/wp-content/themes/opdemand/img/bg-sea.jpg) fixed', 'background-size': '100% 100%'});

$('body').css({'background': 'url(/wp-content/themes/opdemand/img/bg-trees.jpg) fixed', 'background-size': '100% 100%'});

I had a javascript timer that switched between the two statements.

All I had to do to solve the issue of creating a fadeOut -> fadeIn effect was use Rampant Creative Group's suggestion and add

transition: background 1.5s linear;

to my code. Now it fades out and in beautifully.

Thanks Rampant Creative Group's and SoupEnvy for the edit!!

Give a try to this

@Override
public void destroyItem(ViewGroup container, int position, Object object) {
    // TODO Auto-generated method stub

    FragmentManager manager = ((Fragment) object).getFragmentManager();
    FragmentTransaction trans = manager.beginTransaction();
    trans.remove((Fragment) object);
    trans.commit();

    super.destroyItem(container, position, object);
}

Your form is being submitted already as your button is type submit. Which in most browsers would result in a form submission and loading of the server response rather than executing javascript on the page.

Change the type of the submit button to a button. Also, as this button is given the id submit, it will cause a conflict with Javascript's submit function. Change the id of this button. Try something like

<input type="button" value="Submit" id="btnsubmit" onclick="submitForm()">

Another issue in this instance is that the name of the form contains a - dash. However, Javascript translates - as a minus.

You will need to either use array based notation or use document.getElementById() / document.getElementsByName(). The getElementById() function returns the element instance directly as Id is unique (but it requires an Id to be set). The getElementsByName() returns an array of values that have the same name. In this instance as we have not set an id, we can use the getElementsByName with index 0.

Try the following

function submitForm() {
   // Get the first form with the name
   // Usually the form name is not repeated
   // but duplicate names are possible in HTML
   // Therefore to work around the issue, enforce the correct index
   var frm = document.getElementsByName('contact-form')[0];
   frm.submit(); // Submit the form
   frm.reset();  // Reset all form data
   return false; // Prevent page refresh
}

I prefix this reply with "you shouldn't use a regular expression to parse XML -- it's only going to result in edge cases that don't work right, and a forever-increasing-in-complexity regex while you try to fix it."

That being said, you need to proceed by matching the string and grabbing the group you want:

if (m.matches())
{
   String result = m.group(1);
   // do something with result
}

Following is a work-around:

1. Create a shortcut of the .bat file
2. Open the properties of the shortcut. Under the shortcut tab, click on advanced.
3. Tick "Run as administrator"

Running the shortcut will execute your batch script as administrator.

The "table-column" display type means it acts like the <col> tag in HTML - i.e. an invisible element whose width* governs the width of the corresponding physical column of the enclosing table.

See the W3C standard for more information about the CSS table model.

* And a few other properties like borders, backgrounds.

You can try this:

sales['time_hour'] = pd.to_datetime(sales['timestamp']).dt.hour

Use java-google-translate-text-to-speech instead of Google Translate API v2 Java.

About java-google-translate-text-to-speech

Api unofficial with the main features of Google Translate in Java.

Easy to use!

It also provide text to speech api. If you want to translate the text "Hello!" in Romanian just write:

Translator translate = Translator.getInstance();
String text = translate.translate("Hello!", Language.ENGLISH, Language.ROMANIAN);
System.out.println(text); // "Buna ziua!" 

It's free!

As @r0ast3d correctly said:

Important: Google Translate API v2 is now available as a paid service. The courtesy limit for existing Translate API v2 projects created prior to August 24, 2011 will be reduced to zero on December 1, 2011. In addition, the number of requests your application can make per day will be limited.

This is correct: just see the official page:

Google Translate API is available as a paid service. See the Pricing and FAQ pages for details.

BUT, java-google-translate-text-to-speech is FREE!

Example!

I've created a sample application that demonstrates that this works. Try it here: https://github.com/IonicaBizau/text-to-speech

The usernames are shown in the dba_users's username column, there is a script you can run called:

alter user username identified by password

You can get more information here - https://community.oracle.com/thread/632617?tstart=0

I didn't understand your problem clearly but I think this is what you're looking for(Based on my understanding)

  person =   {"name"=>"BillGates", "company_name"=>"Microsoft", "position"=>"Chairman"}

  person.delete_if {|key, value| key == "name"} #doing something if the key == "something"

  Output: {"company_name"=>"Microsoft", "position"=>"Chairman"}

This should do what you want:

$("#iframe").ready(function() {
    var body = $("#iframe").contents().find("body");
    body.append('Test');
});

Check this JSFiddle for working demo.

Edit: You can of course do it one line style:

$("#iframe").contents().find("body").append('Test');

BigJacko's Javascript code worked for me, but in my case I first had to add some JQuery "noconflict" code. Here's the revised version that worked on my site:

<script type="text/javascript">
var $j = jQuery.noConflict(); 
jQuery(document).ready(function($j){
  $j('iframe').each(function() {
    var url = $j(this).attr("src");
      if ($j(this).attr("src").indexOf("?") > 0) {
        $j(this).attr({
          "src" : url + "&wmode=transparent",
          "wmode" : "Opaque"
        });
      }
      else {
        $j(this).attr({
          "src" : url + "?wmode=transparent",
           "wmode" : "Opaque"
        });
      }
   });
});
</script>

With integers, it's preference.

If the loop variable is a class/object, it can make a difference (only profiling can tell you if it's a significant difference), because the post-increment version requires that you create a copy of that object that gets discarded.

If creating that copy is an expensive operation, you're paying that expense once for every time you go through the loop, for no reason at all.

If you get into the habit of always using ++i in for loops, you don't need to stop and think about whether what you're doing in this particular situation makes sense. You just always are.

Importing the namespace is somewhat cleaner. Imagine you have two different modules you import, both of them with the same method/class. Some bad stuff might happen. I'd dare say it is usually good practice to use:

import module

over

from module import function/class

You may get the following error while creating an optimized production build when using query-string module.

Failed to minify the code from this file: ./node_modules/query-string/index.js:8

To overcome this, kindly use the alternative module called stringquery which does the same process well without any issues while running the build.

import querySearch from "stringquery";

var query = querySearch(this.props.location.search);

A small combination from a couple of the examples below and created this simple piece:

function ajax(url, method, data, async)
{
    method = typeof method !== 'undefined' ? method : 'GET';
    async = typeof async !== 'undefined' ? async : false;

    if (window.XMLHttpRequest)
    {
        var xhReq = new XMLHttpRequest();
    }
    else
    {
        var xhReq = new ActiveXObject("Microsoft.XMLHTTP");
    }


    if (method == 'POST')
    {
        xhReq.open(method, url, async);
        xhReq.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
        xhReq.setRequestHeader("X-Requested-With", "XMLHttpRequest");
        xhReq.send(data);
    }
    else
    {
        if(typeof data !== 'undefined' && data !== null)
        {
            url = url+'?'+data;
        }
        xhReq.open(method, url, async);
        xhReq.setRequestHeader("X-Requested-With", "XMLHttpRequest");
        xhReq.send(null);
    }
    //var serverResponse = xhReq.responseText;
    //alert(serverResponse);
}

// Example usage below (using a string query):

ajax('http://www.google.com');
ajax('http://www.google.com', 'POST', 'q=test');

OR if your parameters are object(s) - minor additional code adjustment:

var parameters = {
    q: 'test'
}

var query = [];
for (var key in parameters)
{
    query.push(encodeURIComponent(key) + '=' + encodeURIComponent(parameters[key]));
}

ajax('http://www.google.com', 'POST', query.join('&'));

Both should be fully browser + version compatible.

scala> val arr = Array("Hello","World")
arr: Array[java.lang.String] = Array(Hello, World)

path = "C:\\Users\\Programming\\Downloads"
# Replace \\ with a \ along with any random key multiple times
path.replace('\\', '\pppyyyttthhhooonnn')
# Now replace pppyyyttthhhooonnn with a blank string
path.replace("pppyyyttthhhooonnn", "")

print(path)

#Output... C:\Users\Programming\Downloads