An HttpHandler (or IHttpHandler) is basically anything that is responsible for serving content. An ASP.NET page (aspx) is a type of handler.

You might write your own, for example, to serve images etc from a database rather than from the web-server itself, or to write a simple POX service (rather than SOAP/WCF/etc)

If you want to open it for a range and for a protocol

ufw allow 11200:11299/tcp
ufw allow 11200:11299/udp

Seems like both the conditions are met, perhaps key('contact') is the issue

 if(store.telefon) {
    detailItems.push( new DetailItem('contact', store.telefon, 'Anrufen', 'fontawesome|phone') );
}
if(store.email) {
    detailItems.push( new DetailItem('contact', store.email, 'Email', 'fontawesome|envelope') );
}

It forces the browser to use hardware acceleration to access the device’s graphical processing unit (GPU) to make pixels fly. Web applications, on the other hand, run in the context of the browser, which lets the software do most (if not all) of the rendering, resulting in less horsepower for transitions. But the Web has been catching up, and most browser vendors now provide graphical hardware acceleration by means of particular CSS rules.

Using -webkit-transform: translate3d(0,0,0); will kick the GPU into action for the CSS transitions, making them smoother (higher FPS).

Note: translate3d(0,0,0) does nothing in terms of what you see. It moves the object by 0px in x,y and z axis. It's only a technique to force the hardware acceleration.

Good read here: http://www.smashingmagazine.com/2012/06/21/play-with-hardware-accelerated-css/

If you want to use FXML, you should separate the controller (like you were doing with the SampleController). Then your fx:controller in your FXML should point to that.

Probably you are missing the initialize method in your controller, which is part of the Initializable interface. This method is called after the FXML is loaded, so I recommend you to set your image there.

Your SampleController class must be something like this:

public class SampleController implements Initializable {

    @FXML
    private ImageView imageView;

    @Override
    public void initialize(URL location, ResourceBundle resources) {
        File file = new File("src/Box13.jpg");
        Image image = new Image(file.toURI().toString());
        imageView.setImage(image);
    }
}

I tested here and it's working.

raise without any arguments is a special use of python syntax. It means get the exception and re-raise it. If this usage it could have been called reraise.

    raise

From The Python Language Reference:

If no expressions are present, raise re-raises the last exception that was active in the current scope.

If raise is used alone without any argument is strictly used for reraise-ing. If done in the situation that is not at a reraise of another exception, the following error is shown: RuntimeError: No active exception to reraise

Not sure if it will fix your particular issue but worth sharing anyway.

I had issues with twitter boot strap in IE. No rounded corners. Navigation menu not collapsing. Spans not sitting in correct location, even some images not displaying.

Strangely, site works okay in IE when run through visual studio debugger, its once deployed to a server that the problem occurs.

Try using IE developer tools (F12 is keyboard shortcut) Check your browser mode and document mode. (its at the top along side the menu bar)

Problem happened for me as document was IE7 and browser was IE10 compatibility. I added a http header in IIS: Name X-UA-Compatible Value IE=EmulateIE9

Now the page loads as document - IE9 standards, browser IE10 compatibility and all the previous issues are resolved.

Hope this helps.

-tessi

you can use raiserror. Read more details here

--from MSDN

BEGIN TRY
    -- RAISERROR with severity 11-19 will cause execution to 
    -- jump to the CATCH block.
    RAISERROR ('Error raised in TRY block.', -- Message text.
               16, -- Severity.
               1 -- State.
               );
END TRY
BEGIN CATCH
    DECLARE @ErrorMessage NVARCHAR(4000);
    DECLARE @ErrorSeverity INT;
    DECLARE @ErrorState INT;

    SELECT 
        @ErrorMessage = ERROR_MESSAGE(),
        @ErrorSeverity = ERROR_SEVERITY(),
        @ErrorState = ERROR_STATE();

    -- Use RAISERROR inside the CATCH block to return error
    -- information about the original error that caused
    -- execution to jump to the CATCH block.
    RAISERROR (@ErrorMessage, -- Message text.
               @ErrorSeverity, -- Severity.
               @ErrorState -- State.
               );
END CATCH;

EDIT If you are using SQL Server 2012+ you can use throw clause. Here are the details.

From: http://nginx.org/r/large_client_header_buffers

Syntax: large_client_header_buffers number size ;
Default: large_client_header_buffers 4 8k;
Context: http, server

Sets the maximum number and size of buffers used for reading large client request header. A request line cannot exceed the size of one buffer, or the 414 (Request-URI Too Large) error is returned to the client. A request header field cannot exceed the size of one buffer as well, or the 400 (Bad Request) error is returned to the client. Buffers are allocated only on demand. By default, the buffer size is equal to 8K bytes. If after the end of request processing a connection is transitioned into the keep-alive state, these buffers are released.

so you need to change the size parameter at the end of that line to something bigger for your needs.

Also, you can give valgrind a try: if you install valgrind and run

valgrind --leak-check=full <program>

then it will run your program and display stack traces for any segfaults, as well as any invalid memory reads or writes and memory leaks. It's really quite useful.

Thank you Sigh David Levy. I could not develop on Eclipse w/out your sol'n. I had to add a coupla catch (exceptions) to your code to get it to work:

            while (srcEntries.hasMoreElements()) {
                    ZipEntry entry = (ZipEntry) srcEntries.nextElement();
                    logger.info("Processing zip entry ["+ entry.getName() + "]");

                    ZipEntry newEntry = new ZipEntry(entry.getName());


                    try { outStream.putNextEntry(newEntry); } 
                    ***catch (Exception e) { 
                        logger.error("error: ", e);
                        outStream.closeEntry();
                        continue;*
                    }**

Using RxJs, you can declare a Subject in your parent component and pass it as Observable to child component, child component just need to subscribe to this Observable.

Parent-Component

eventsSubject: Subject<void> = new Subject<void>();

emitEventToChild() {
  this.eventsSubject.next();
}

Parent-HTML

<child [events]="eventsSubject.asObservable()"> </child>    

Child-Component

private eventsSubscription: Subscription;

@Input() events: Observable<void>;

ngOnInit(){
  this.eventsSubscription = this.events.subscribe(() => doSomething());
}

ngOnDestroy() {
  this.eventsSubscription.unsubscribe();
}

Just use git show <tag>

However, it also dumps commit diffs. To omit those diffs, use git log -1 <tag>. (Thanks to @DolphinDream and @demisx !)

You need to call self.a() to invoke a from b. a is not a global function, it is a method on the class.

You may want to read through the Python tutorial on classes some more to get the finer details down.

Boxing isn't really something that you use - it is something the runtime uses so that you can handle reference and value types in the same way when necessary. For example, if you used an ArrayList to hold a list of integers, the integers got boxed to fit in the object-type slots in the ArrayList.

Using generic collections now, this pretty much goes away. If you create a List<int>, there is no boxing done - the List<int> can hold the integers directly.

Check if it is integer parseable

public boolean isInteger(String string) {
    try {
        Integer.valueOf(string);
        return true;
    } catch (NumberFormatException e) {
        return false;
    }
}

or use Scanner

Scanner scanner = new Scanner("Test string: 12.3 dog 12345 cat 1.2E-3");

while (scanner.hasNext()) {
    if (scanner.hasNextDouble()) {
        Double doubleValue = scanner.nextDouble();
    } else {
        String stringValue = scanner.next();
    }
}

or use Regular Expression like

private static Pattern doublePattern = Pattern.compile("-?\\d+(\\.\\d*)?");

public boolean isDouble(String string) {
    return doublePattern.matcher(string).matches();
}

The main difference between this answer and the accepted answer is the use of setViewportView() instead of add().

How to put JTable in JScrollPane using Eclipse IDE:

1. Create JScrollPane container via Design tab.
2. Stretch JScrollPane to desired size (applies to Absolute Layout).
3. Drag and drop JTable component on top of JScrollPane (Viewport area).

In Structure > Components, table should be a child of scrollPane.

The generated code would be something like this:

JScrollPane scrollPane = new JScrollPane();
...

JTable table = new JTable();
scrollPane.setViewportView(table);

You should use & / | operators and be careful about operator precedence (== has lower precedence than bitwise AND and OR):

df1 = sqlContext.createDataFrame(
    [(1, "a", 2.0), (2, "b", 3.0), (3, "c", 3.0)],
    ("x1", "x2", "x3"))

df2 = sqlContext.createDataFrame(
    [(1, "f", -1.0), (2, "b", 0.0)], ("x1", "x2", "x3"))

df = df1.join(df2, (df1.x1 == df2.x1) & (df1.x2 == df2.x2))
df.show()

## +---+---+---+---+---+---+
## | x1| x2| x3| x1| x2| x3|
## +---+---+---+---+---+---+
## |  2|  b|3.0|  2|  b|0.0|
## +---+---+---+---+---+---+

I was getting this bug because I tested a hover and then needed to click on the link underneath the tooltip. The solution was to add page.find('.sp-logo').hover before click_link to get the tooltip out of the way.

You can use Type Enforcement accept/returns decorators from PythonDecoratorLibrary It's very easy and readable:

@accepts(int, int, float)
def myfunc(i1, i2, i3):
    pass

Edit

A better way to do this is:

1. Create your own less file as a main less file ( like bootstrap.less ).

2. Import all bootstrap less files you need. (in this case, you just need to Import all responsive less files but responsive-1200px-min.less)

3. If you need to modify anything in original bootstrap less file, you just need to write your own less to overwrite bootstrap's less code. (Just remember to put your less code/file after @import { /* bootstrap's less file */ };).

Original

I have the same problem. This is how I fixed it.

Find the media query:

@media (max-width:1200px) ...

Remove it. (I mean the whole thing , not just @media (max-width:1200px))

Since the default width of Bootstrap is 940px, you don't need to do anything.

If you want to have your own max-width, just modify the css rule in the media query that matches your desired width.

As all other answers currying helps to create partially applied functions. Javascript does not provide native support for automatic currying. So the examples provided above may not help in practical coding. There is some excellent example in livescript (Which essentially compiles to js) http://livescript.net/

times = (x, y) --> x * y
times 2, 3       #=> 6 (normal use works as expected)
double = times 2
double 5         #=> 10

In above example when you have given less no of arguments livescript generates new curried function for you (double)

Unless you have to write formulas or formatting you should consider writing out a .csv file. Infinitely simpler, infinitely faster, and Excel will do the conversion to .xls or .xlsx automatically and correctly by definition.

What I have done here is that I have returned a promise from the justTesting function. You can then get the result when the function is resolved.

// new answer

function justTesting() {
  return new Promise((resolve, reject) => {
    if (true) {
      return resolve("testing");
    } else {
      return reject("promise failed");
   }
 });
}

justTesting()
  .then(res => {
     let test = res;
     // do something with the output :)
  })
  .catch(err => {
    console.log(err);
  });

Hope this helps!

// old answer

function justTesting() {
  return promise.then(function(output) {
    return output + 1;
  });
}

justTesting().then((res) => {
     var test = res;
    // do something with the output :)
    }

I am set Tooltips On My Working Project That Is 100% Working

<!DOCTYPE html>_x000D_
<html>_x000D_
<style>_x000D_
.tooltip {_x000D_
  position: relative;_x000D_
  display: inline-block;_x000D_
  border-bottom: 1px dotted black;_x000D_
}_x000D_
_x000D_
.tooltip .tooltiptext {_x000D_
  visibility: hidden;_x000D_
  width: 120px;_x000D_
  background-color: black;_x000D_
  color: #fff;_x000D_
  text-align: center;_x000D_
  border-radius: 6px;_x000D_
  padding: 5px 0;_x000D_
_x000D_
  /* Position the tooltip */_x000D_
  position: absolute;_x000D_
  z-index: 1;_x000D_
}_x000D_
_x000D_
.tooltip:hover .tooltiptext {_x000D_
  visibility: visible;_x000D_
}_x000D_
.size_of_img{_x000D_
width:90px}_x000D_
</style>_x000D_
_x000D_
<body style="text-align:center;">_x000D_
_x000D_
<p>Move the mouse over the text below:</p>_x000D_
_x000D_
<div class="tooltip"><img class="size_of_img" src="https://babeltechreviews.com/wp-content/uploads/2018/07/rendition1.img_.jpg" alt="Image 1" /><span class="tooltiptext">grewon.pdf</span></div>_x000D_
_x000D_
<p>Note that the position of the tooltip text isn't very good. Check More Position <a href="https://www.w3schools.com/css/css_tooltip.asp">GO</a></p>_x000D_
_x000D_
</body>_x000D_
</html>

I feel that the simplest approach is to use the format() function.

For example:

a = 13.949999999999999
format(a, '.2f')

13.95

This produces a float number as a string rounded to two decimal points.

Updated:

<build> 
  <plugins> 
    <plugin> 
    <artifactId>maven-dependency-plugin</artifactId> 
    <executions> 
      <execution> 
        <phase>install</phase> 
          <goals> 
            <goal>copy-dependencies</goal> 
          </goals> 
          <configuration> 
             <outputDirectory>${project.build.directory}/lib</outputDirectory> 
          </configuration> 
        </execution> 
      </executions> 
    </plugin> 
  </plugins> 
</build> 

From MSDN:

C#, through the .NET Framework common language runtime (CLR), automatically releases the memory used to store objects that are no longer required. The release of memory is non-deterministic; memory is released whenever the CLR decides to perform garbage collection. However, it is usually best to release limited resources such as file handles and network connections as quickly as possible.

The using statement allows the programmer to specify when objects that use resources should release them. The object provided to the using statement must implement the IDisposable interface. This interface provides the Dispose method, which should release the object's resources.

In other words, the using statement tells .NET to release the object specified in the using block once it is no longer needed.

public boolean isInternetWorking(){
    try {
        int timeOut = 5000;
        Socket socket = new Socket();
        SocketAddress socketAddress = new InetSocketAddress("8.8.8.8",53);
        socket.connect(socketAddress,timeOut);
        socket.close();
        return true;
    } catch (IOException e) {
        //silent
    }
    return false;
}

If you know the groupId and aritifactId,you can generate download url like this.

    <dependency>
        <groupId>ch.qos.logback</groupId>
        <artifactId>logback-classic</artifactId>
        <version>1.2.3</version>
    </dependency>

http://central.maven.org/maven2/ch/qos/logback/logback-classic/

and you will get a page like this, chose the version you need,just enjoy it!

return; // Prematurely return from the method (same keword works in VB, by the way)

payton109’s answer is correct if you’re in the default US-EAST-1 region. If your bucket is in a different region, use a slightly different URL:

https://s3-<region>.amazonaws.com/your.domain.com/some/asset

Where <region> is the bucket location name. For example, if your bucket is in the us-west-2 (Oregon) region, you can do this:

https://s3-us-west-2.amazonaws.com/your.domain.com/some/asset

I think buffers are e.g. useful when interfacing python to native libraries. (Guido van Rossum explains buffer in this mailinglist post).

For example, numpy seems to use buffer for efficient data storage:

import numpy
a = numpy.ndarray(1000000)

the a.data is a:

<read-write buffer for 0x1d7b410, size 8000000, offset 0 at 0x1e353b0>

There is an easy way of configuring GIT to handle your server the right way. Just add an specific http section for your git server and specify which certificate (Base64 encoded) to trust:

~/.gitconfig

[http "https://repo.your-server.com"]
# windows path use double back slashes
#  sslCaInfo = C:\\Users\\<user>\\repo.your-server.com.cer
# unix path to certificate (Base64 encoded)
sslCaInfo = /home/<user>/repo.your-server.com.cer

This way you will have no more SSL errors and validate the (usually) self-signed certificate. This is the best way to go, as it protects you from man-in-the-middle attacks. When you just disable ssl verification you are vulnerable to these kind of attacks.

https://git-scm.com/docs/git-config#git-config-httplturlgt

TL;DR: - grab the datatable from the dataset and read from the rows property.

            DataSet ds = new DataSet();
            DataTable dt = new DataTable();
            DataColumn col = new DataColumn("Id", typeof(int));
            dt.Columns.Add(col);
            dt.Rows.Add(new object[] { 1 });
            ds.Tables.Add(dt);

            var row = ds.Tables[0].Rows[0];
            //access the ID column.  
            var id = (int) row.ItemArray[0];

A DataSet is a copy of data accessed from a database, but doesn't even require a database to use at all. It is preferred, though.

Note that if you are creating a new application, consider using an ORM, such as the Entity Framework or NHibernate, since DataSets are no longer preferred; however, they are still supported and as far as I can tell, are not going away any time soon.

If you are reading from standard dataset, then @KMC's answer is what you're looking for. The proper way to do this, though, is to create a Strongly-Typed DataSet and use that so you can take advantage of Intellisense. Assuming you are not using the Entity Framework, proceed.

If you don't already have a dedicated space for your data access layer, such as a project or an App_Data folder, I suggest you create one now. Otherwise, proceed as follows under your data project folder: Add > Add New Item > DataSet. The file created will have an .xsd extension.

You'll then need to create a DataTable. Create a DataTable (click on the file, then right click on the design window - the file has an .xsd extension - and click Add > DataTable). Create some columns (Right click on the datatable you just created > Add > Column). Finally, you'll need a table adapter to access the data. You'll need to setup a connection to your database to access data referenced in the dataset.

After you are done, after successfully referencing the DataSet in your project (using statement), you can access the DataSet with intellisense. This makes it so much easier than untyped datasets.

When possible, use Strongly-Typed DataSets instead of untyped ones. Although it is more work to create, it ends up saving you lots of time later with intellisense. You could do something like:

MyStronglyTypedDataSet trainDataSet = new MyStronglyTypedDataSet();
DataAdapterForThisDataSet dataAdapter = new DataAdapterForThisDataSet();
//code to fill the dataset 
//omitted - you'll have to either use the wizard to create data fill/retrieval
//methods or you'll use your own custom classes to fill the dataset.
if(trainDataSet.NextTrainDepartureTime > CurrentTime){
   trainDataSet.QueueNextTrain = true; //assumes QueueNextTrain is in your Strongly-Typed dataset
}
else
    //do some other work

The above example assumes that your Strongly-Typed DataSet has a column of type DateTime named NextTrainDepartureTime. Hope that helps!

Use these two commands in your terminal

alias mysql=/usr/local/mysql/bin/mysql
mysql --user=root -p

Then it will ask you to enter password of your user pc

Enter password:

Assuming your m_Queue contains integers:

std::queue<int>().swap(m_Queue)

Otherwise, if it contains e.g. pointers to Job objects, then:

std::queue<Job*>().swap(m_Queue)

This way you swap an empty queue with your m_Queue, thus m_Queue becomes empty.

http://jsfiddle.net/f2znvn4f/

HTML

<div class="box-left-mini">
    <div class="front"><span>this is in front</span></div>
    <div class="behind_container">
        <div class="behind">behind</div>        
    </div>
</div>

CSS

.box-left-mini{
    float:left;
    background-image:url(website-content/hotcampaign.png);
    width:292px;
    height:141px;
}

.box-left-mini .front {
    display: block;
    z-index: 5;
    position: relative;
}
.box-left-mini .front span {
    background: #fff
}

.box-left-mini .behind_container {
    background-color: #ff0;
    position: relative;
    top: -18px;
}
.box-left-mini .behind {
    display: block;
    z-index: 3;
}

The reason you're getting so many different answers is because you've not explained what you want to do exactly. All the answers you get with code will be programmatically correct, but it's all down to what you want to achieve

• kwargs in **kwargs is just variable name. You can very well have **anyVariableName
• kwargs stands for "keyword arguments". But I feel they should better be called as "named arguments", as these are simply arguments passed along with names (I dont find any significance to the word "keyword" in the term "keyword arguments". I guess "keyword" usually means words reserved by programming language and hence not to be used by the programmer for variable names. No such thing is happening here in case of kwargs.). So we give names param1 and param2 to two parameter values passed to the function as follows: func(param1="val1",param2="val2"), instead of passing only values: func(val1,val2). Thus, I feel they should be appropriately called "arbitrary number of named arguments" as we can specify any number of these parameters (that is, arguments) if func has signature func(**kwargs)

So being said that let me explain "named arguments" first and then "arbitrary number of named arguments" kwargs.

Named arguments

• named args should follow positional args
• order of named args is not important

• Example

  def function1(param1,param2="arg2",param3="arg3"):
      print("\n"+str(param1)+" "+str(param2)+" "+str(param3)+"\n")
  
  function1(1)                      #1 arg2 arg3   #1 positional arg
  function1(param1=1)               #1 arg2 arg3   #1 named arg
  function1(1,param2=2)             #1 2 arg3      #1 positional arg, 1 named arg
  function1(param1=1,param2=2)      #1 2 arg3      #2 named args       
  function1(param2=2, param1=1)     #1 2 arg3      #2 named args out of order
  function1(1, param3=3, param2=2)  #1 2 3         #
  
  #function1()                      #invalid: required argument missing
  #function1(param2=2,1)            #invalid: SyntaxError: non-keyword arg after keyword arg
  #function1(1,param1=11)           #invalid: TypeError: function1() got multiple values for argument 'param1'
  #function1(param4=4)              #invalid: TypeError: function1() got an unexpected keyword argument 'param4'
  

Arbitrary number of named arguments kwargs

• Sequence of function parameters:
  1. positional parameters
  2. formal parameter capturing arbitrary number of arguments (prefixed with *)
  3. named formal parameters
  4. formal parameter capturing arbitrary number of named parameters (prefixed with **)

• Example

  def function2(param1, *tupleParams, param2, param3, **dictionaryParams):
      print("param1: "+ param1)
      print("param2: "+ param2)
      print("param3: "+ param3)
      print("custom tuple params","-"*10)
      for p in tupleParams:
          print(str(p) + ",")
      print("custom named params","-"*10)
      for k,v in dictionaryParams.items():
          print(str(k)+":"+str(v))
  
  function2("arg1",
            "custom param1",
            "custom param2",
            "custom param3",
            param3="arg3",
            param2="arg2", 
            customNamedParam1 = "val1",
            customNamedParam2 = "val2"
            )
  
  # Output
  #
  #param1: arg1
  #param2: arg2
  #param3: arg3
  #custom tuple params ----------
  #custom param1,
  #custom param2,
  #custom param3,
  #custom named params ----------
  #customNamedParam2:val2
  #customNamedParam1:val1
  

Passing tuple and dict variables for custom args

To finish it up, let me also note that we can pass

• "formal parameter capturing arbitrary number of arguments" as tuple variable and
• "formal parameter capturing arbitrary number of named parameters" as dict variable

Thus the same above call can be made as follows:

tupleCustomArgs = ("custom param1", "custom param2", "custom param3")
dictCustomNamedArgs = {"customNamedParam1":"val1", "customNamedParam2":"val2"}

function2("arg1",
      *tupleCustomArgs,    #note *
      param3="arg3",
      param2="arg2", 
      **dictCustomNamedArgs     #note **
      )

Finally note * and ** in function calls above. If we omit them, we may get ill results.

Omitting * in tuple args:

function2("arg1",
      tupleCustomArgs,   #omitting *
      param3="arg3",
      param2="arg2", 
      **dictCustomNamedArgs
      )

prints

param1: arg1
param2: arg2
param3: arg3
custom tuple params ----------
('custom param1', 'custom param2', 'custom param3'),
custom named params ----------
customNamedParam2:val2
customNamedParam1:val1

Above tuple ('custom param1', 'custom param2', 'custom param3') is printed as is.

Omitting dict args:

function2("arg1",
      *tupleCustomArgs,   
      param3="arg3",
      param2="arg2", 
      dictCustomNamedArgs   #omitting **
      )

gives

dictCustomNamedArgs
         ^
SyntaxError: non-keyword arg after keyword arg

class HashMap:
    def __init__(self):
        self.size = 64
        self.map = [None] * self.size

    def _get_hash(self, key):
        hash = 0

        for char in str(key):
            hash += ord(char)
        return hash % self.size

    def add(self, key, value):
        key_hash = self._get_hash(key)
        key_value = [key, value]

        if self.map[key_hash] is None:
            self.map[key_hash] = list([key_value])
            return True
        else:
            for pair in self.map[key_hash]:
                if pair[0] == key:
                    pair[1] = value
                    return True
                else:
                    self.map[key_hash].append(list([key_value]))
                    return True

    def get(self, key):
        key_hash = self._get_hash(key)
        if self.map[key_hash] is not None:
            for pair in self.map[key_hash]: 
                if pair[0] == key:
                    return pair[1]
        return None

    def delete(self, key):
        key_hash = self._get_hash(key)

        if self.map[key_hash] is None :
            return False
        for i in range(0, len(self.map[key_hash])):
            if self.map[key_hash][i][0] == key:
                self.map[key_hash].pop(i)
                return True

    def print(self):

        print('---Phonebook---')
        for item in self.map:
            if item is not None:
                print(str(item))

h = HashMap()

Yes right the static array is created at the compile time where as the dynamic array is created on the run time. Where as the difference as far is concerned with their memory locations the static are located on the stack and the dynamic are created on the heap. Everything which gets located on heap needs the memory management until and unless garbage collector as in the case of .net framework is present otherwise there is a risk of memory leak.

You need something like this :

UPDATE P
SET ExtrasPrice = E.TotalPrice
FROM dbo.BookingPitches AS P
INNER JOIN (SELECT BPE.PitchID, Sum(BPE.Price) AS TotalPrice
    FROM BookingPitchExtras AS BPE
    WHERE BPE.[Required] = 1
    GROUP BY BPE.PitchID) AS E ON P.ID = E.PitchID
WHERE P.BookingID = 1

When you call "https://darkorbit.com/" your server figures that it's missing "www" so it redirects the call to "http://www.darkorbit.com/" and then to "https://www.darkorbit.com/", your WebView call is blocked at the first redirection as it's a "http" call. You can call "https://www.darkorbit.com/" instead and it will solve the issue.

cast(str_column as int)

From: Language manual UDFs - type conversion functions

You don't want to do that. It can cause undefined behavior depending on the collection. You want to use an Iterator directly. Although the for each construct is syntactic sugar and is really using an iterator, it hides it from your code so you can't access it to call Iterator.remove.

The behavior of an iterator is unspecified if the underlying collection is modified while the iteration is in progress in any way other than by calling this method.

Instead write your code:

List<String> names = ....
Iterator<String> it = names.iterator();
while (it.hasNext()) {

    String name = it.next();
    // Do something
    it.remove();
}

Note that the code calls Iterator.remove, not List.remove.

Addendum:

Even if you are removing an element that has not been iterated over yet, you still don't want to modify the collection and then use the Iterator. It might modify the collection in a way that is surprising and affects future operations on the Iterator.

Also, you may want to try Data::Dumper. Example:

use Data::Dumper;

# simple procedural interface
print Dumper($foo, $bar);

The terms "shallow copy" and "deep copy" are a bit vague; I would suggest using the terms "memberwise clone" and what I would call a "semantic clone". A "memberwise clone" of an object is a new object, of the same run-time type as the original, for every field, the system effectively performs "newObject.field = oldObject.field". The base Object.Clone() performs a memberwise clone; memberwise cloning is generally the right starting point for cloning an object, but in most cases some "fixup work" will be required following a memberwise clone. In many cases attempting to use an object produced via memberwise clone without first performing the necessary fixup will cause bad things to happen, including the corruption of the object that was cloned and possibly other objects as well. Some people use the term "shallow cloning" to refer to memberwise cloning, but that's not the only use of the term.

A "semantic clone" is an object which is contains the same data as the original, from the point of view of the type. For examine, consider a BigList which contains an Array> and a count. A semantic-level clone of such an object would perform a memberwise clone, then replace the Array> with a new array, create new nested arrays, and copy all of the T's from the original arrays to the new ones. It would not attempt any sort of deep-cloning of the T's themselves. Ironically, some people refer to the of cloning "shallow cloning", while others call it "deep cloning". Not exactly useful terminology.

While there are cases where truly deep cloning (recursively copying all mutable types) is useful, it should only be performed by types whose constituents are designed for such an architecture. In many cases, truly deep cloning is excessive, and it may interfere with situations where what's needed is in fact an object whose visible contents refer to the same objects as another (i.e. a semantic-level copy). In cases where the visible contents of an object are recursively derived from other objects, a semantic-level clone would imply a recursive deep clone, but in cases where the visible contents are just some generic type, code shouldn't blindly deep-clone everything that looks like it might possibly be deep-clone-able.

A reproducible example:

the_plot <- function()
{
  x <- seq(0, 1, length.out = 100)
  y <- pbeta(x, 1, 10)
  plot(
    x,
    y,
    xlab = "False Positive Rate",
    ylab = "Average true positive rate",
    type = "l"
  )
}

James's suggestion of using pointsize, in combination with the various cex parameters, can produce reasonable results.

png(
  "test.png",
  width     = 3.25,
  height    = 3.25,
  units     = "in",
  res       = 1200,
  pointsize = 4
)
par(
  mar      = c(5, 5, 2, 2),
  xaxs     = "i",
  yaxs     = "i",
  cex.axis = 2,
  cex.lab  = 2
)
the_plot()
dev.off()

Of course the better solution is to abandon this fiddling with base graphics and use a system that will handle the resolution scaling for you. For example,

library(ggplot2)

ggplot_alternative <- function()
{
  the_data <- data.frame(
    x <- seq(0, 1, length.out = 100),
    y = pbeta(x, 1, 10)
  )

ggplot(the_data, aes(x, y)) +
    geom_line() +
    xlab("False Positive Rate") +
    ylab("Average true positive rate") +
    coord_cartesian(0:1, 0:1)
}

ggsave(
  "ggtest.png",
  ggplot_alternative(),
  width = 3.25,
  height = 3.25,
  dpi = 1200
)

I would go with the System.Environment.NewLine or a StringBuilder

Then you could add lines with a string builder like this:

StringBuilder sb = new StringBuilder();
sb.AppendLine("brown");
sb.AppendLine("brwn");

textbox1.Text += sb.ToString();

or NewLine like this:

textbox1.Text += System.Environment.NewLine + "brown";

Better:

StringBuilder sb = new StringBuilder(textbox1.Text);
sb.AppendLine("brown");
sb.AppendLine("brwn");

textbox1.Text = sb.ToString();

Since I'm disturbed by the verbosity of some of the new NUnit patterns, I use something like this to create code that is cleaner for me personally:

public void AssertBusinessRuleException(TestDelegate code, string expectedMessage)
{
    var ex = Assert.Throws<BusinessRuleException>(code);
    Assert.AreEqual(ex.Message, expectedMessage);
}

public void AssertException<T>(TestDelegate code, string expectedMessage) where T:Exception
{
    var ex = Assert.Throws<T>(code);
    Assert.AreEqual(ex.Message, expectedMessage);
}

The usage is then:

AssertBusinessRuleException(() => user.MakeUserActive(), "Actual exception message");

With GNU Make, you can use shell and eval to store, run, and assign output from arbitrary command line invocations. The difference between the example below and those which use := is the := assignment happens once (when it is encountered) and for all. Recursively expanded variables set with = are a bit more "lazy"; references to other variables remain until the variable itself is referenced, and the subsequent recursive expansion takes place each time the variable is referenced, which is desirable for making "consistent, callable, snippets". See the manual on setting variables for more info.

# Generate a random number.
# This is not run initially.
GENERATE_ID = $(shell od -vAn -N2 -tu2 < /dev/urandom)

# Generate a random number, and assign it to MY_ID
# This is not run initially.
SET_ID = $(eval MY_ID=$(GENERATE_ID))

# You can use .PHONY to tell make that we aren't building a target output file
.PHONY: mytarget
mytarget:
# This is empty when we begin
    @echo $(MY_ID)
# This recursively expands SET_ID, which calls the shell command and sets MY_ID
    $(SET_ID)
# This will now be a random number
    @echo $(MY_ID)
# Recursively expand SET_ID again, which calls the shell command (again) and sets MY_ID (again)
    $(SET_ID)
# This will now be a different random number
    @echo $(MY_ID)

<IfModule mod_rewrite.c>
  RewriteEngine On
  RewriteCond %{HTTP_HOST} ^olddomain.com$ [OR]
  RewriteCond %{HTTP_HOST} ^www.olddomain.com$
  RewriteRule (.*)$ http://www.newdomain.com/$1 [R=301,L]
</IfModule>

This worked for me

I use tmux for a multiple window/pane development environment on remote hosts. It's really simple to detach and keep the process running in the background. Have a look at tmux

In case anyone needs this for knockout js, it works ok with basically the proposed solution:

html:

<a data-bind="attr: {download: filename, href: csvContent}">Download</a>

view model:

// for the download link
this.filename = ko.computed(function () {
    return ko.unwrap(this.id) + '.csv';
}, this);
this.csvContent = ko.computed(function () {
    if (!this.csvLink) {
        var data = ko.unwrap(this.data),
            ret = 'data:text/csv;charset=utf-8,';

        ret += data.map(function (row) {
            return row.join(',');
        }).join('\n');

        return encodeURI(ret);
    }
}, this);

The question is tagged WPF but the answers so far are specific WinForms and Win32.

To do this in WPF, simply construct a KeyEventArgs and call RaiseEvent on the target. For example, to send an Insert key KeyDown event to the currently focused element:

var key = Key.Insert;                    // Key to send
var target = Keyboard.FocusedElement;    // Target element
var routedEvent = Keyboard.KeyDownEvent; // Event to send
     target.RaiseEvent(
  new KeyEventArgs(
    Keyboard.PrimaryDevice,
    PresentationSource.FromVisual(target),
    0,
    key)
  { RoutedEvent=routedEvent }
);

This solution doesn't rely on native calls or Windows internals and should be much more reliable than the others. It also allows you to simulate a keypress on a specific element.

Note that this code is only applicable to PreviewKeyDown, KeyDown, PreviewKeyUp, and KeyUp events. If you want to send TextInput events you'll do this instead:

var text = "Hello";
var target = Keyboard.FocusedElement;
var routedEvent = TextCompositionManager.TextInputEvent;

target.RaiseEvent(
  new TextCompositionEventArgs(
    InputManager.Current.PrimaryKeyboardDevice,
    new TextComposition(InputManager.Current, target, text))
  { RoutedEvent = routedEvent }
);

Also note that:

• Controls expect to receive Preview events, for example PreviewKeyDown should precede KeyDown

• Using target.RaiseEvent(...) sends the event directly to the target without meta-processing such as accelerators, text composition and IME. This is normally what you want. On the other hand, if you really do what to simulate actual keyboard keys for some reason, you would use InputManager.ProcessInput() instead.

Since .NET 3.0, you can simply use *yourElement*.TranslatePoint(new Point(0, 0), *theContainerOfYourChoice*).

This will give you the point 0, 0 of your button, but towards the container. (You can also give an other point that 0, 0)

Check here for the doc.

Right. The function you pass to getLocations() won't get called until the data is available, so returning "country" before it's been set isn't going to help you.

The way you need to do this is to have the function that you pass to geocoder.getLocations() actually do whatever it is you wanted done with the returned values.

Something like this:

function reverseGeocode(latitude,longitude){
  var geocoder = new GClientGeocoder();
  var latlng = new GLatLng(latitude, longitude);

  geocoder.getLocations(latlng, function(addresses) {
    var address = addresses.Placemark[0].address;
    var country = addresses.Placemark[0].AddressDetails.Country.CountryName;
    var countrycode = addresses.Placemark[0].AddressDetails.Country.CountryNameCode;
    var locality = addresses.Placemark[0].AddressDetails.Country.AdministrativeArea.SubAdministrativeArea.Locality.LocalityName;
    do_something_with_address(address, country, countrycode, locality);
  });   
}

function do_something_with_address(address, country, countrycode, locality) {
  if (country==="USA") {
     alert("USA A-OK!"); // or whatever
  }
}

If you might want to do something different every time you get the location, then pass the function as an additional parameter to reverseGeocode:

function reverseGeocode(latitude,longitude, callback){
  // Function contents the same as above, then
  callback(address, country, countrycode, locality);
}
reverseGeocode(latitude, longitude, do_something_with_address);

If this looks a little messy, then you could take a look at something like the Deferred feature in Dojo, which makes the chaining between functions a little clearer.

SELECT CLASS,
isnull([AZ],0),
isnull([CA],0),
isnull([TX],0)
FROM #TEMP
PIVOT (SUM(DATA)
FOR STATE IN ([AZ], [CA], [TX])) AS PVT
ORDER BY CLASS

A simple Toast message works also as a quick check.

One Liner:

modalPresentationStyle is required to be set on the navigationController which is being presented.

iOS 13 and below iOS version fullScreen with overCurrentContext and navigationController

Tested Code

let controller = UIViewController()
let navigationController = UINavigationController(rootViewController: controller)
navigationController.modalPresentationStyle = .overCurrentContext
self.navigationController?.present(navigationController, animated: true, completion: nil)

modalPresentationStyle require to set at navigationController.

Not that I know of, unless you select from INFORMATION_SCHEMA, as others have mentioned.

However, the SHOW command is pretty flexible, E.g.:

SHOW tables like '%s%'

Using a regex as you described is the simple way (as far as I am aware). If you want a range you could use [^a-f].

to Make it Like your App Bar Color

import 'package:flutter/material.dart';

 Widget build(BuildContext context) {
  SystemChrome.setSystemUIOverlayStyle(SystemUiOverlayStyle(
      statusBarColor: Colors.transparent,
      systemNavigationBarColor: Colors.transparent,
  ));
 }

Faster than the above solutions, including the highest rated one:

(x < 0) ? -1 : (x > 0)

Try a case statement

WHERE
CASE WHEN @zipCode IS NULL THEN 1
ELSE @zipCode
END

Karan has posted the answer but that didn't work for me. So, I am posting what worked for me. If that didn't work then user can try this

<configuration> 
    <system.webServer> 
        <defaultDocument enabled="true"> 
            <files> 
                <add value="myFile.aspx" /> 
            </files> 
        </defaultDocument> 
    </system.webServer>
</configuration> 

self.close() does not work, are you sure you closing a window and not a script generated popup ?

you guys might want to look at this : https://bugzilla.mozilla.org/show_bug.cgi?id=183697

 <script type="text/javascript">
      var multilinestr = `
        line 1
        line 2
        line 3
        line 4
        line 5
        line 6`;
      totallines = multilinestr.split("\n");
lines = str.split("\n"); 
console.log(lines.length);
</script>

thats works in my case

Changing Tomcat config wont effect all JVM instances to get theses settings. This is not how it works, the setting will be used only to launch JVMs used by Tomcat, not started in the shell.

Look here for permanently changing the heap size.

With library(lubridate), numeric representations of date and time saved as the number of seconds since 1970-01-01 00:00:00 UTC, can be coerced into dates with as_datetime():

lubridate::as_datetime(1352068320)

[1] "2012-11-04 22:32:00 UTC"

Simple way on macOS e.g. installed via homebrew

$ ls -l $(which kafka-topics)
/usr/local/bin/kafka-topics -> ../Cellar/kafka/0.11.0.1/bin/kafka-topics

It is also possible to have the third color (center). And different kinds of shapes.

For example in drawable/gradient.xml:

<shape
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:shape="rectangle">
    <gradient
        android:startColor="#000000"
        android:centerColor="#5b5b5b"
        android:endColor="#000000"
        android:angle="0" />
</shape>

This gives you black - gray - black (left to right) which is my favorite dark background atm.

Remember to add gradient.xml as background in your layout xml:

android:background="@drawable/gradient"

It is also possible to rotate, with:

angle="0"

gives you a vertical line

and with

angle="90"

gives you a horizontal line

Possible angles are:

0, 90, 180, 270.

Also there are few different kind of shapes:

android:shape="rectangle"

Rounded shape:

android:shape="oval"

and problably a few more.

Hope it helps, cheers!

cursor:url('http://www.javascriptkit.com/dhtmltutors/cursor-hand.gif'), auto

NOTE 1: In some cases you should consider setting the offset (anchor):

cursor:url(http://www.javascriptkit.com/dhtmltutors/cursor-hand.gif) 10 3, auto;

in this exmple, we set offsetx to 10 and offsety to 3 (from top left), so the pointer finger will be anchor. fiddle: http://jsfiddle.net/5kxt1j98/ (you can see the difference by moving cursor to top left of container)

NOTE 2: THE MAX CURSOR SIZE IS 128*128, recommended one is below 32*32.

You can just specify the python version when running a program:

for python 2:

python filename.py

for python 3:

python3 filename.py

You can use updateMany() methods of mongodb to update multiple document

Simple query is like this

db.collection.updateMany(filter, update, options)

For more doc of uppdateMany read here

As per your requirement the update code will be like this:

User.updateMany({"created": false}, {"$set":{"created": true}});

here you need to use $set because you just want to change created from true to false. For ref. If you want to change entire doc then you don't need to use $set

IMHO, it is more efficient to drop the table and re-create it. And yes, you can use "IF EXISTS" in this case.

from selenium import webdriver

driver = webdriver.Firefox()
driver.implicitly_wait(12)
driver.set_page_load_timeout(10)

def _post_selenium(self, url: str, data: dict):
    input_template = '{k} <input type="text" name="{k}" id="{k}" value="{v}"><BR>\n'
    inputs = ""
    if data:
        for k, v in data.items():
            inputs += input_template.format(k=k, v=v)
    html = f'<html><body>\n<form action="{url}" method="post" id="formid">\n{inputs}<input type="submit" id="inputbox">\n</form></body></html>'

    html_file = os.path.join(os.getcwd(), 'temp.html')
    with open(html_file, "w") as text_file:
        text_file.write(html)

    driver.get(f"file://{html_file}")
    driver.find_element_by_id('inputbox').click()

_post_selenium("post.to.my.site.url", {"field1": "val1"})

driver.close()

use com.google.gms:google-services:4.0.1' instead of 4.1.0

Your issue is in PHPMyAdmin itself. Some versions do not display the value of bit columns, even though you did set it correctly.

Just for fun, another approach would be to just leave the paging and horizontal scrolling set, add a method that changes the order of the array items to convert from 'top to bottom, left to right' to visually 'left to right, top to bottom' and fill the in-between cells with empty hidden cells to make the spacing right. In case of 7 items in a grid of 9, this would go like this:

[1][4][7]
[2][5][ ]
[3][6][ ]

should become

[1][2][3]
[4][5][6]
[7][ ][ ]

so 1=1, 2=4, 3=7 etc. and 6=empty. You can reorder them by calculating the total number of rows and columns, then calculate the row and column number for each cell, change the row for the column and vice versa and then you have the new indexes. When the cell doesn't have a value corresponding to the image you can return an empty cell and set cell.hidden = YES; to it.

It works quite well in a soundboard app I built, so if anyone would like working code I'll add it. Only little code is required to make this trick work, it sounds harder than it is!

Update

I doubt this is the best solution, but by request here's working code:

- (void)viewDidLoad {
    // Fill an `NSArray` with items in normal order
    items = [NSMutableArray arrayWithObjects:
             [NSDictionary dictionaryWithObjectsAndKeys:@"Some label 1", @"label", @"Some value 1", @"value", nil],
             [NSDictionary dictionaryWithObjectsAndKeys:@"Some label 2", @"label", @"Some value 2", @"value", nil],
             [NSDictionary dictionaryWithObjectsAndKeys:@"Some label 3", @"label", @"Some value 3", @"value", nil],
             [NSDictionary dictionaryWithObjectsAndKeys:@"Some label 4", @"label", @"Some value 4", @"value", nil],
             [NSDictionary dictionaryWithObjectsAndKeys:@"Some label 5", @"label", @"Some value 5", @"value", nil],
              nil
              ];

    // Calculate number of rows and columns based on width and height of the `UICollectionView` and individual cells (you might have to add margins to the equation based on your setup!)
    CGFloat w = myCollectionView.frame.size.width;
    CGFloat h = myCollectionView.frame.size.height;
    rows = floor(h / cellHeight);
    columns = floor(w / cellWidth);
}

// Calculate number of sections
- (NSInteger)numberOfSectionsInCollectionView:(UICollectionView *)collectionView {
    return ceil((float)items.count / (float)(rows * columns));
}

// Every section has to have every cell filled, as we need to add empty cells as well to correct the spacing
- (NSInteger)collectionView:(UICollectionView *)collectionView numberOfItemsInSection:(NSInteger)section {
    return rows*columns;
}

// And now the most important one
- (UICollectionViewCell *)collectionView:(UICollectionView *)collectionView cellForItemAtIndexPath:(NSIndexPath *)indexPath {
    UICollectionViewCell *cell = [collectionView dequeueReusableCellWithReuseIdentifier@"myIdentifier" forIndexPath:indexPath];

    // Convert rows and columns
    int row = indexPath.row % rows;
    int col = floor(indexPath.row / rows);
    // Calculate the new index in the `NSArray`
    int newIndex = ((int)indexPath.section * rows * columns) + col + row * columns;

    // If the newIndex is within the range of the items array we show the cell, if not we hide it
    if(newIndex < items.count) {
        NSDictionary *item = [items objectAtIndex:newIndex];
        cell.label.text = [item objectForKey:@"label"];
        cell.hidden = NO;
    } else {
        cell.hidden = YES;
    }

    return cell;
}

If you'd like to use the didSelectItemAtIndexPath method you have to use the same conversion that is used in cellForItemAtIndexPath to get the corresponding item. If you have cell margins you need to add them to the rows and columns calculation, as those have to be correct in order for this to work.

Because this is javascript and dynamic you could define your own class that matches the File interface and use that instead.

I had to do just that with dropzone.js because I wanted to simulate a file upload and it works on File objects.

I thought I was bright ;-)

In CSS:

option:disabled {display:none;}

In Firefox and Chrome, a select with only the enabled options were created. Nice.

In IE, the enabled options were shown, the disabled where just blank lines, in their original location. Bad.

In Edge, the enabled options shown at top, followed by blank lines for disabled options. Acceptable.

You technically have two options when speaking of ISO dates.

In general, if you're filtering specifically on Date values alone OR looking to persist date in a neutral fashion. Microsoft recommends using the language neutral format of ymd or y-m-d. Which are both valid ISO formats.

Note that the form '2007-02-12' is considered language-neutral only for the data types DATE, DATETIME2, and DATETIMEOFFSET.

Because of this, your safest bet is to persist/filter based on the always netural ymd format.

The code:

select convert(char(10), getdate(), 126) -- ISO YYYY-MM-DD
select convert(char(8), getdate(), 112) -- ISO YYYYMMDD (safest)

The limitation relates to the simplified CommonJS syntax vs. the normal callback syntax:

• http://requirejs.org/docs/whyamd.html#commonjscompat
• https://github.com/jrburke/requirejs/wiki/Differences-between-the-simplified-CommonJS-wrapper-and-standard-AMD-define

Loading a module is inherently an asynchronous process due to the unknown timing of downloading it. However, RequireJS in emulation of the server-side CommonJS spec tries to give you a simplified syntax. When you do something like this:

var foomodule = require('foo');
// do something with fooModule

What's happening behind the scenes is that RequireJS is looking at the body of your function code and parsing out that you need 'foo' and loading it prior to your function execution. However, when a variable or anything other than a simple string, such as your example...

var module = require(path); // Call RequireJS require

...then Require is unable to parse this out and automatically convert it. The solution is to convert to the callback syntax;

var moduleName = 'foo';
require([moduleName], function(fooModule){
    // do something with fooModule
})

Given the above, here is one possible rewrite of your 2nd example to use the standard syntax:

define(['dyn_modules'], function (dynModules) {
    require(dynModules, function(){
        // use arguments since you don't know how many modules you're getting in the callback
        for (var i = 0; i < arguments.length; i++){
            var mymodule = arguments[i];
            // do something with mymodule...
        }
    });

});

EDIT: From your own answer, I see you're using underscore/lodash, so using _.values and _.object can simplify the looping through arguments array as above.

This may be a dead thread, but I tend to use the following:

public static T? GetValueOrNull<T>(this DbDataRecord reader, string columnName)
where T : struct 
{
    return reader[columnName] as T?;
}

Here's something I've just knocked up. It inspects the environment of the last-launched "gnome-session" process (DISPLAY is set correctly when VNC launches a session/window manager). Replace "gnome-session" with the name of whatever process your VNC server launches on startup.

PID=`pgrep -n -u $USER gnome-session`
if [ -n "$PID" ]; then
    export DISPLAY=`awk 'BEGIN{FS="="; RS="\0"}  $1=="DISPLAY" {print $2; exit}' /proc/$PID/environ`
    echo "DISPLAY set to $DISPLAY"
else
    echo "Could not set DISPLAY"
fi
unset PID

You should just be able to drop that in your .bashrc file.

You can choose which separator you want in Excel 2013 Go to DATA -> Text To Columns -> Choose delimited -> then choose your separator "Tab, Semicolon, Comma, Space or other" and you will see changes immediately in the "data preview" then click FInish

Once you have the format that you wanted, you simply save the document and it will be permanent.

You can configure property inclusion, and numerous other settings, via application.properties:

spring.jackson.default-property-inclusion=non_null

There's a table in the documentation that lists all of the properties that can be used.

If you want more control, you can also customize Spring Boot's configuration programatically using a Jackson2ObjectMapperBuilderCustomizer bean, as described in the documentation:

The context’s Jackson2ObjectMapperBuilder can be customized by one or more Jackson2ObjectMapperBuilderCustomizer beans. Such customizer beans can be ordered (Boot’s own customizer has an order of 0), letting additional customization be applied both before and after Boot’s customization.

Lastly, if you don't want any of Boot's configuration and want to take complete control over how the ObjectMapper is configured, declare your own Jackson2ObjectMapperBuilder bean:

@Bean
Jackson2ObjectMapperBuilder objectMapperBuilder() {
    Jackson2ObjectMapperBuilder builder = new Jackson2ObjectMapperBuilder();
    // Configure the builder to suit your needs
    return builder;
}

To answer the questions directly:

Will collect() behave the same way if called on a dataframe?

Yes, spark.DataFrame.collect is functionally the same as spark.RDD.collect. They serve the same purpose on these different objects.

What about the select() method?

There is no such thing as spark.RDD.select, so it cannot be the same as spark.DataFrame.select.

Does it also work the same way as collect() if called on a dataframe?

The only thing that is similar between select and collect is that they are both functions on a DataFrame. They have absolutely zero overlap in functionality.

Here's my own description: collect is the opposite of sc.parallelize. select is the same as the SELECT in any SQL statement.

If you are still having trouble understanding what collect actually does (for either RDD or DataFrame), then you need to look up some articles about what spark is doing behind the scenes. e.g.:

• https://dzone.com/articles/how-spark-internally-executes-a-program
• https://data-flair.training/blogs/spark-rdd-operations-transformations-actions/

If you are familiar with RxJava, you can use Observable.interval(), which is pretty neat.

Observable.interval(60, TimeUnits.SECONDS)
          .flatMap(new Function<Long, ObservableSource<String>>() {
                @Override
                public ObservableSource<String> apply(@NonNull Long aLong) throws Exception {
                    return getDataObservable(); //Where you pull your data
                }
            });

The downside of this is that you have to architect polling your data in a different way. However, there are a lot of benefits to the Reactive Programming way:

1. Instead of controlling your data via a callback, you create a stream of data that you subscribe to. This separates the concern of "polling data" logic and "populating UI with your data" logic so that you do not mix your "data source" code and your UI code.

2. With RxAndroid, you can handle threads in just 2 lines of code.

   Observable.interval(60, TimeUnits.SECONDS)
         .flatMap(...) // polling data code
         .subscribeOn(Schedulers.newThread()) // poll data on a background thread
         .observeOn(AndroidSchedulers.mainThread()) // populate UI on main thread
         .subscribe(...); // your UI code
   

Please check out RxJava. It has a high learning curve but it will make handling asynchronous calls in Android so much easier and cleaner.

Use it

    $this->db->_error_message(); 

It is better for finding error.After completing your site. Close the error messages using it

    $db['default']['db_debug'] = FALSE;

You will change it in your config folder's database.php

Try this from your AndroidTabRestaurantDescSearchListView activity

Intent intent  = new Intent(this,RatingDescriptionSearchActivity.class );
intent.putExtras( getIntent().getExtras() );
startActivity( intent );  

And then from RatingDescriptionSearchActivity activity just call

getIntent().getStringExtra("key")

You can convert it to a JavaBean if you want using:

 Gson gson = new GsonBuilder().setPrettyPrinting().create();
 gson.fromJson(jsonString, JavaBean.class)

To use JsonObject, which is more flexible, use the following:

String json = "{\"Success\":true,\"Message\":\"Invalid access token.\"}";
JsonParser jsonParser = new JsonParser();
JsonObject jo = (JsonObject)jsonParser.parse(json);
Assert.assertNotNull(jo);
Assert.assertTrue(jo.get("Success").getAsString());

Which is equivalent to the following:

JsonElement jelem = gson.fromJson(json, JsonElement.class);
JsonObject jobj = jelem.getAsJsonObject();

If you want to add a scroll bar using jquery the following will work. If your div had a id of 'mydiv' you could us the following jquery id selector with css property:

jQuery('#mydiv').css("overflow-y", "scroll");

use IDLE Editor {You may already have it} it has interactive shell for python and it will show you execution and result.

Add overflow: auto to the container div. http://www.quirksmode.org/css/clearing.html This website shows a few options when having this issue.

Another way to run jar files with a click/double-click, is to prepend "-jar " to the file's name. For example, you would rename the file MyJar.jar to -jar MyJar.jar.

You must have the .class files associated with java.exe, of course. This might not work in all cases, but it has worked most times for me.

Note: Due to reputation I cannot comment on bdeem's post. I'm posting my findings as an answer instead.

Following bdeem's post, I did the following (in order):

1. I modified the [project].csproj file. Added the <Content Include="" /> tags to the ItemGroup for the different config files and made them dependent on the original config file.

Note: Using <None Include="" /> will not work with the transformation.

<!-- App.config Settings -->
<!-- Create App.($Configuration).config files here. -->
<Content Include="App.config" />
<Content Include="App.Debug.config">
  <DependentUpon>App.config</DependentUpon>
</Content>
<Content Include="App.Release.config">
  <DependentUpon>App.config</DependentUpon>
</Content>

2. At the bottom of the [project].csproj file (before the closing </Project> tag), I imported the ${MSBuildToolsPath\Microsoft.CSharp.targets file, added the UsingTask to transform the XML and added the Target to copy the transformed App.config file to the output location.

Note: The Target will also overwrite the App.Config in the local directory to see immediate changes working locally. The Target also uses the Name="Afterbuild" property to ensure the config files can be transformed after the executables are generated. For reasons I do not understand, when using WCF endpoints, if I use Name="CoreCompile", I will get warnings about the service attributes. Name="Afterbuild" resolved this.

  <!-- Task to transform the App.config using the App.($Configuration).config file. -->
  <UsingTask TaskName="TransformXml" AssemblyFile="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\v$(VisualStudioVersion)\Web\Microsoft.Web.Publishing.Tasks.dll" />

  <!-- Only compile the App.config if the App.($Configuration).config file exists. -->
  <!-- Make sure to use the AfterBuild name instead of CoreCompile to avoid first time build errors and WCF endpoint errors. -->
  <Target Name="AfterBuild" Condition="exists('App.$(Configuration).config')">
    <!-- Generate transformed App.config in the intermediate output directory -->    
    <TransformXml Source="App.config" Destination="$(IntermediateOutputPath)$(TargetFileName).config" Transform="App.$(Configuration).config" />
    
    <!-- Modify the original App.config file with the transformed version. -->
    <TransformXml Source="App.config" Destination="App.config" Transform="App.$(Configuration).config" />

    <!-- Force build process to use the transformed configuration file from now on. -->
    <ItemGroup>
      <AppConfigWithTargetPath Remove="App.config" />
      <AppConfigWithTargetPath Include="$(IntermediateOutputPath)$(TargetFileName).config">
        <TargetPath>$(TargetFileName).config</TargetPath>
      </AppConfigWithTargetPath>
    </ItemGroup>
  </Target>
</Project>

3. Went back into Visual Studio and reloaded the modified files.

4. Manually added the App.*.config files to the project. This allowed them to group under the original App.config file.

Note: Make sure the App.*.config files have the proper XML structure.

<?xml version="1.0" encoding="utf-8"?>

<!-- For more information on using web.config transformation visit https://go.microsoft.com/fwlink/?LinkId=125889 -->

<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
  <connectionStrings>
    <add name="myConn" connectionString=""; Initial Catalog=; User ID=; Password=;" xdt:Transform="SetAttributes" xdt:Locator="Match(name)" />
  </connectionStrings>
</configuration>

5. Re-built the project.

The following is another method that will work, although as with some of the other methods it will strip decimal places.

a = 1,112
b = a.scan(/\d+/).join().to_i => 1112

This works with me :
1- select the cells which shall be be affected by the drop down list .
2- home -> conditional formating -> new rule .
3- format only cells that contain .
4- in format only cells with ... select specific text , in formatting rule "= select Elementary from your drop down list"
if drop list in another sheet then when select Elementary we see "=Sheet3!$F$2" in the new rule , with your own sheet and cell number.
5- format -> fill -> select color -> ok.
6-ok .
do the same for each element in drop down list then you will see the magic !

I'm not sure why your breakpoints aren't hitting, but one sure-fire way to step into your code is to type

debugger;

where you want the code to halt, and then run again with the chrome developer tools window open.

Just one small thing to be aware of, be sure to clean up after you done and remove the debugger lines. If you ever run JavaScript files through YUI compressor, the existence of a debugger; line will cause it to error out.

If you also want to block Sundays (or other days) as well as the array of dates, I use this code:

jQuery(function($){

    var disabledDays = [
       "27-4-2016", "25-12-2016", "26-12-2016",
       "4-4-2017", "5-4-2017", "6-4-2017", "6-4-2016", "7-4-2017", "8-4-2017", "9-4-2017"
    ];

   //replace these with the id's of your datepickers
   $("#id-of-first-datepicker,#id-of-second-datepicker").datepicker({
      beforeShowDay: function(date){
         var day = date.getDay();
         var string = jQuery.datepicker.formatDate('d-m-yy', date);
         var isDisabled = ($.inArray(string, disabledDays) != -1);

         //day != 0 disables all Sundays
         return [day != 0 && !isDisabled];
      }
   });
});   

Put the line in a stringstream and extract word by word back:

#include <iostream>
#include <sstream>
using namespace std;

int main()
{
    string t;
    getline(cin,t);

    istringstream iss(t);
    string word;
    while(iss >> word) {
        /* do stuff with word */
    }
}

Of course, you can just skip the getline part and read word by word from cin directly.

And here you can read why is using namespace std considered bad practice.

For all to those having problems with this i did this tutorial:

How to install Imagemagick and Php module Imagick on ubuntu?

i did this 7 simple steps:

Update libraries, and packages

apt-get update

Remove obsolete things

apt-get autoremove

For the libraries of ImageMagick

apt-get install libmagickwand-dev

for the core class Imagick

apt-get install imagemagick

For create the binaries, and conections in beetween

pecl install imagick

Append the extension to your php.ini

echo "extension=imagick.so" >> /etc/php5/apache2/php.ini

Restart Apache

service apache2 restart

I found a problem. PHP searches for .so files in a folder called /usr/lib/php5/20100525, and the imagick.so is stored in a folder called /usr/lib/php5/20090626. So you have to copy the file to that folder.

I was receiving the same error message, and my issue was that I was not in the correct directory when running the command make install. When I changed to the directory that had my makefile it worked.

So possibly you aren't in the right directory.

You don't have to define operator< for your class, actually. You can also make a comparator function object class for it, and use that to specialize std::map. To extend your example:

struct Class1Compare
{
   bool operator() (const Class1& lhs, const Class1& rhs) const
   {
       return lhs.id < rhs.id;
   }
};

std::map<Class1, int, Class1Compare> c2int;

It just so happens that the default for the third template parameter of std::map is std::less, which will delegate to operator< defined for your class (and fail if there is none). But sometimes you want objects to be usable as map keys, but you do not actually have any meaningful comparison semantics, and so you don't want to confuse people by providing operator< on your class just for that. If that's the case, you can use the above trick.

Yet another way to achieve the same is to specialize std::less:

namespace std
{
    template<> struct less<Class1>
    {
       bool operator() (const Class1& lhs, const Class1& rhs) const
       {
           return lhs.id < rhs.id;
       }
    };
}

The advantage of this is that it will be picked by std::map "by default", and yet you do not expose operator< to client code otherwise.

Try rename command:

rename 's/_h.png/_half.png/' *.png

Update:

example usage:

create some content

$ mkdir /tmp/foo
$ cd /tmp/foo
$ touch one_h.png two_h.png three_h.png
$ ls 
one_h.png  three_h.png  two_h.png

test solution:

$ rename 's/_h.png/_half.png/' *.png
$ ls
one_half.png  three_half.png  two_half.png

this is useful to know about hashcode in java :

http://eclipsesource.com/blogs/2012/09/04/the-3-things-you-should-know-about-hashcode/

I had the following error message Port 80 in use by "Unable to open process" with PID 4! Apache WILL NOT start without the configured ports free! You need to uninstall/disable/reconfigure the blocking application or reconfigure Apache and the Control Panel to listen on a different port Starting Check-Timer Control Panel Ready

opened the httpd.conf and changed the listen port from 80 to 1234 in both places

Listen 12.34.56.78:1234

Listen 1234

Then go to Config for the xampp control panel and go to service and port setting and changed the port from 80 to 1234

That worked.

I typed

git checkout <branch_name>

and got

Branch <branch_name> set up to track remote branch <branch_name> from origin.
Switched to a new branch '<branch_name>'

I only use the forward slash once at the end of each script, to tell sqlplus that there is not more lines of code. In the middle of a script, I do not use a slash.

AzP already provided most of the information, but some of it is incorrect.

First of all, there is no such option inotify_interval. The only option that exists is notify_interval and has nothing to do with inotify.

So to clarify, notify_interval controls how frequently the (mini)dlna server announces itself in the network. The default value of 895 means it will announce itself about once every 15 minutes, meaning clients will need at most 15 minutes to find the server. I personally use 1-5 minutes depending on client volatility in the network.

In terms of getting minidlna to find files that have been added, there are two options:

• The first is equivalent to removing the file files.db and consists in restarting minidlna while passing the -R argument, which forces a full rescan and builds the database from scratch. Since version 1.2.0 there's now also the -r argument which performs a rebuild action. This preserves any existing database and drops and adds old and new records, respectively.
• The second is to rely on inotify events by setting inotify=yes and restarting minidlna. If inotify is set to =no, the only option to update the file database is the forced full rescan.

Additionally, in order to have inotify working, the file-system must support inotify events, which is not the case in most remote file-systems. If you have minidlna running over NFS it will not see any inotify events because these are generated on the server side and not on the client.

Finally, even if inotify is working and is supported by the file-system, the user under which minidlna is running must be able to read the file, otherwise it will not be able to retrieve necessary metadata. In this case, the logfile (usually /var/log/minidlna.log) should contain useful information.

When your are three tables or more, just add union and left outer join:

select a.col1, b.col2, a.col3, b.col4, a.category_id 
from 
(
    select category_id from a
    union
    select category_id from b
) as c
left outer join a on a.category_id = c.category_id
left outer join b on b.category_id = c.category_id

in older bash (or in sh) that does not support declare -A, following style can be used to emulate key/value

# key
env=staging


# values
image_dev=gcr.io/abc/dev
image_staging=gcr.io/abc/stage
image_production=gcr.io/abc/stable

img_var_name=image_$env

# active_image=${!var_name}
active_image=$(eval "echo \$$img_var_name")

echo $active_image

px ? Pixels

All of these answers seem to be incorrect. Contrary to intuition, in CSS the px is not pixels. At least, not in the simple physical sense.

Read this article from the W3C, EM, PX, PT, CM, IN…, about how px is a "magical" unit invented for CSS. The meaning of px varies by hardware and resolution. (That article is fresh, last updated 2014-10.)

My own way of thinking about it: 1 px is the size of a thin line intended by a designer to be barely visible.

To quote that article:

The px unit is the magic unit of CSS. It is not related to the current font and also not related to the absolute units. The px unit is defined to be small but visible, and such that a horizontal 1px wide line can be displayed with sharp edges (no anti-aliasing). What is sharp, small and visible depends on the device and the way it is used: do you hold it close to your eyes, like a mobile phone, at arms length, like a computer monitor, or somewhere in between, like a book? The px is thus not defined as a constant length, but as something that depends on the type of device and its typical use.

To get an idea of the appearance of a px, imagine a CRT computer monitor from the 1990s: the smallest dot it can display measures about 1/100th of an inch (0.25mm) or a little more. The px unit got its name from those screen pixels.

Nowadays there are devices that could in principle display smaller sharp dots (although you might need a magnifier to see them). But documents from the last century that used px in CSS still look the same, no matter what the device. Printers, especially, can display sharp lines with much smaller details than 1px, but even on printers, a 1px line looks very much the same as it would look on a computer monitor. Devices change, but the px always has the same visual appearance.

That article gives some guidance about using pt vs px vs em, to answer this Question.

I created my own function converting numbers to their corresponding month.

def month_name (number):
    if number == 1:
        return "January"
    elif number == 2:
        return "February"
    elif number == 3:
        return "March"
    elif number == 4:
        return "April"
    elif number == 5:
        return "May"
    elif number == 6:
        return "June"
    elif number == 7:
        return "July"
    elif number == 8:
        return "August"
    elif number == 9:
        return "September"
    elif number == 10:
        return "October"
    elif number == 11:
        return "November"
    elif number == 12:
        return "December"

Then I can call the function. For example:

print (month_name (12))

Outputs:

>>> December

If scrlMain is your NestedScrollView, then use the following,

scrlMain.post(new Runnable() {
                    @Override
                    public void run() {
                        scrlMain.fullScroll(View.FOCUS_UP);

                    }
                });

check http://www.tech-archive.net/Archive/VB/microsoft.public.vb.database.ado/2005-08/msg00056.html

one needs to use something like

cmd.CommandText = "BEGIN foo@v; END;" 

worked for me in vb.net, c#

Someone has to champion use of vertical whitespace here! :)

if (     cond1 == val1
     and cond2 == val2
     and cond3 == val3
   ):
    do_stuff()

This makes each condition clearly visible. It also allows cleaner expression of more complex conditions:

if (    cond1 == val1
     or 
        (     cond2_1 == val2_1
          and cond2_2 >= val2_2
          and cond2_3 != bad2_3
        )
   ):
    do_more_stuff()

Yes, we're trading off a bit of vertical real estate for clarity. Well worth it IMO.

Simply go to project Explorer and change your View from Android to project from drop Down and you are good to go.There you can simply create folder like we do in Eclipse. And in android project view it is hidden but when you switch to project. You can create folder like drawable-hdpi,drawable-xhdpi.

Bootstrap 4.3 - more here

$('#exampleModal').modal();

<!-- Initialize Bootstrap 4 -->_x000D_
_x000D_
<link rel="stylesheet" href="https://stackpath.bootstrapcdn.com/bootstrap/4.3.1/css/bootstrap.min.css" integrity="sha384-ggOyR0iXCbMQv3Xipma34MD+dH/1fQ784/j6cY/iJTQUOhcWr7x9JvoRxT2MZw1T" crossorigin="anonymous">_x000D_
<script src="https://code.jquery.com/jquery-3.3.1.slim.min.js" integrity="sha384-q8i/X+965DzO0rT7abK41JStQIAqVgRVzpbzo5smXKp4YfRvH+8abtTE1Pi6jizo" crossorigin="anonymous"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/popper.js/1.14.7/umd/popper.min.js" integrity="sha384-UO2eT0CpHqdSJQ6hJty5KVphtPhzWj9WO1clHTMGa3JDZwrnQq4sF86dIHNDz0W1" crossorigin="anonymous"></script>_x000D_
<script src="https://stackpath.bootstrapcdn.com/bootstrap/4.3.1/js/bootstrap.min.js" integrity="sha384-JjSmVgyd0p3pXB1rRibZUAYoIIy6OrQ6VrjIEaFf/nJGzIxFDsf4x0xIM+B07jRM" crossorigin="anonymous"></script>_x000D_
_x000D_
_x000D_
<!-- MODAL -->_x000D_
_x000D_
<div class="modal fade" id="exampleModal" tabindex="-1" role="dialog">_x000D_
  <div class="modal-dialog" role="document">_x000D_
    <div class="modal-content">_x000D_
    _x000D_
      <div class="modal-body">_x000D_
        Hello world   _x000D_
      </div>_x000D_
      _x000D_
      <div class="modal-footer">_x000D_
        <button type="button" class="btn btn-secondary" data-dismiss="modal">Close</button>_x000D_
      </div>_x000D_
_x000D_
    </div>_x000D_
  </div>_x000D_
</div>

Chkconfig is no longer available in Ubuntu.

Chkconfig is a script. You can download it from here.

Chrome's favicon support is buggy - disregard this answer

I wrote this answer under the impression that this is what it took to refresh favicons in Google Chrome. However, it turns out that this only works for the first five minutes or so, until the icon gets irretrievably lost in Chrome's history synchronization.

Original answer

You don't have to clear your cache, restart your browser, or rewrite your HTML - you just need to change the icon's URL, once, so that the browser will forget the previously-cached icon.

Assuming that you've defined your icon via <link> elements in your page's <head>, you can do that by running this standard-JS one-liner in the console:

[].slice.call(document.querySelectorAll('head>link[rel$="icon"]')).map(function(ln){ln.href+='?v=2'});

For a more advanced implementation of this that can automatically do this for end users in production, see freshicon.js.

JavaFX SortedList

Though it took a while, Java 8 does have a sorted List. http://docs.oracle.com/javase/8/javafx/api/javafx/collections/transformation/SortedList.html

As you can see in the javadocs, it is part of the JavaFX collections, intended to provide a sorted view on an ObservableList.

Update: Note that with Java 11, the JavaFX toolkit has moved outside the JDK and is now a separate library. JavaFX 11 is available as a downloadable SDK or from MavenCentral. See https://openjfx.io

I think this is the correct way:

Guid filed = Guid.Empty;

This was already pointed out in this comment, but I think that's too easy to overlook: You may run into an UnnecessaryStubbingException if you simply convert a JUnit 4 test class to a JUnit 5 test class by replacing an existing @Before with @BeforeEach, and if you perform some stubbing in that setup method that is not realized by at least one of the test cases.

This Mockito thread has more information on that, basically there is a subtle difference in the test execution between @Before and @BeforeEach. With @Before, it was sufficient if any test case realized the stubbings, with @BeforeEach, all cases would have to.

If you don't want to break up the setup of @BeforeEach into many small bits (as the comment cited above rightly points out), there's another option still instead of activating the lenient mode for the whole test class: you can merely make those stubbings in the @BeforeEach method lenient individually using lenient().

You can use the pskill function in the R "tools" package to interrupt the current process and return to the console. Concretely, I have the following function defined in a startup file that I source at the beginning of each script. You can also copy it directly at the start of your code, however. Then insert halt() at any point in your code to stop script execution on the fly. This function works well on GNU/Linux and judging from the R documentation, it should also work on Windows (but I didn't check).

# halt: interrupts the current R process; a short iddle time prevents R from
# outputting further results before the SIGINT (= Ctrl-C) signal is received 
halt <- function(hint = "Process stopped.\n") {
    writeLines(hint)
    require(tools, quietly = TRUE)
    processId <- Sys.getpid() 
    pskill(processId, SIGINT)
    iddleTime <- 1.00
    Sys.sleep(iddleTime)
}

Minimum crossdomain set I've used for embedding fitted single iframe on a page.

On embedding page (containing iframe):

<iframe frameborder="0" id="sizetracker" src="http://www.hurtta.com/Services/SizeTracker/DE" width="100%"></iframe>
<script type="text/javascript">
  // Create browser compatible event handler.
  var eventMethod = window.addEventListener ? "addEventListener" : "attachEvent";
  var eventer = window[eventMethod];
  var messageEvent = eventMethod == "attachEvent" ? "onmessage" : "message";
  // Listen for a message from the iframe.
  eventer(messageEvent, function(e) {
    if (isNaN(e.data)) return;

    // replace #sizetracker with what ever what ever iframe id you need
    document.getElementById('sizetracker').style.height = e.data + 'px';

  }, false);
</script>

On embedded page (iframe):

<script type="text/javascript">
function sendHeight()
{
    if(parent.postMessage)
    {
        // replace #wrapper with element that contains 
        // actual page content
        var height= document.getElementById('wrapper').offsetHeight;
        parent.postMessage(height, '*');
    }
}

// Create browser compatible event handler.
var eventMethod = window.addEventListener ? "addEventListener" : "attachEvent";
var eventer = window[eventMethod];
var messageEvent = eventMethod == "attachEvent" ? "onmessage" : "message";

// Listen for a message from the iframe.
eventer(messageEvent, function(e) {

    if (isNaN(e.data)) return;

    sendHeight();

}, 
false);
</script>

try to add ojdbc6.jar or other version through the server lib "C:\apache-tomcat-7.0.47\lib",

Then restart the server in eclipse.

you can use --extra-vars like this:

$ ansible all --inventory=10.0.1.2, -m ping \
    --extra-vars "ansible_user=root ansible_password=yourpassword"

If you're authenticating to a Linux host that's joined to a Microsoft Active Directory domain, this command line works.

ansible --module-name ping --extra-vars 'ansible_user=domain\user ansible_password=PASSWORD' --inventory 10.10.6.184, all

To get current skin URL use this Mage::getDesign()->getSkinUrl()

I created a function that might help. All it does is imitate the alert but put an image instead of text.

function alertImage(imgsrc) {
$('.d').css({
    'position': 'absolute',
    'top': '0',
    'left': '50%',
    '-webkit-transform': 'translate(-50%, 0)'
});
$('.d').animate({
    opacity: 0
}, 0)
$('.d').animate({
    opacity: 1,
    top: "10px"
}, 250)
$('.d').append('An embedded page on this page says')
$('.d').append('<br><img src="' + imgsrc + '">')
$('.b').css({
  'position':'absolute',
  '-webkit-transform': 'translate(-100%, -100%)',
  'top':'100%',
  'left':'100%',
  'display':'inline',
  'background-color':'#598cbd',
  'border-radius':'4px',
  'color':'white',
  'border':'none',
  'width':'66',
  'height':'33'
})
}

<script type="text/javascript" src="https://code.jquery.com/jquery-latest.min.js"></script>
<div class="d"><button onclick="$('.d').html('')" class="b">OK</button></div>

.d{
font-size: 17px;
  font-family: sans-serif;
}
.b{
  display: none;
}

Use flush when you need to write, for example to get a primary key ID from an autoincrementing counter.

john=Person(name='John Smith', parent=None)
session.add(john)
session.flush()

son=Person(name='Bill Smith', parent=john.id)

Without flushing, john would never get an ID from the DB and so couldn't represent the parent/child relationship in code.

Like others have said, without commit() none of this will be permanently persisted to DB.

Global.asax is the asp.net application file.

It is an optional file that handles events raised by ASP.NET or by HttpModules. Mostly used for application and session start/end events and for global error handling.

When used, it should be in the root of the website.

In java-8, they introduced the method removeIf which takes a Predicate as parameter.

So it will be easy as:

List<String> list = new ArrayList<>(Arrays.asList("How are you",
                                                  "How you doing",
                                                  "Joe",
                                                  "Mike"));
list.removeIf(s -> !s.contains("How"));

import org.openjdk.jmh.annotations.Benchmark;
import org.openjdk.jmh.annotations.BenchmarkMode;
import org.openjdk.jmh.annotations.Fork;
import org.openjdk.jmh.annotations.Measurement;
import org.openjdk.jmh.annotations.Mode;
import org.openjdk.jmh.annotations.OutputTimeUnit;
import org.openjdk.jmh.annotations.Scope;
import org.openjdk.jmh.annotations.Setup;
import org.openjdk.jmh.annotations.State;
import org.openjdk.jmh.annotations.Warmup;

import java.util.concurrent.TimeUnit;

@State(Scope.Thread)
@BenchmarkMode(Mode.AverageTime)
@OutputTimeUnit(TimeUnit.NANOSECONDS)
@Warmup(iterations = 5, time = 1)
@Fork(value = 1)
@Measurement(iterations = 5, time = 1)
public class StringFirstCharBenchmark {

    private String source;

    @Setup
    public void init() {
        source = "MALE";
    }

    @Benchmark
    public String substring() {
        return source.substring(0, 1);
    }

    @Benchmark
    public String indexOf() {
        return String.valueOf(source.indexOf(0));
    }
}

Results:

+----------------------------------------------------------------------+
| Benchmark                           Mode  Cnt   Score   Error  Units |
+----------------------------------------------------------------------+
| StringFirstCharBenchmark.indexOf    avgt    5  23.777 ? 5.788  ns/op |
| StringFirstCharBenchmark.substring  avgt    5  11.305 ? 1.411  ns/op |
+----------------------------------------------------------------------+

The value of hjust and vjust are only defined between 0 and 1:

• 0 means left-justified
• 1 means right-justified

Source: ggplot2, Hadley Wickham, page 196

(Yes, I know that in most cases you can use it beyond this range, but don't expect it to behave in any specific way. This is outside spec.)

hjust controls horizontal justification and vjust controls vertical justification.

An example should make this clear:

td <- expand.grid(
    hjust=c(0, 0.5, 1),
    vjust=c(0, 0.5, 1),
    angle=c(0, 45, 90),
    text="text"
)

ggplot(td, aes(x=hjust, y=vjust)) + 
    geom_point() +
    geom_text(aes(label=text, angle=angle, hjust=hjust, vjust=vjust)) + 
    facet_grid(~angle) +
    scale_x_continuous(breaks=c(0, 0.5, 1), expand=c(0, 0.2)) +
    scale_y_continuous(breaks=c(0, 0.5, 1), expand=c(0, 0.2))

To understand what happens when you change the hjust in axis text, you need to understand that the horizontal alignment for axis text is defined in relation not to the x-axis, but to the entire plot (where this includes the y-axis text). (This is, in my view, unfortunate. It would be much more useful to have the alignment relative to the axis.)

DF <- data.frame(x=LETTERS[1:3],y=1:3)
p <- ggplot(DF, aes(x,y)) + geom_point() + 
    ylab("Very long label for y") +
    theme(axis.title.y=element_text(angle=0))


p1 <- p + theme(axis.title.x=element_text(hjust=0)) + xlab("X-axis at hjust=0")
p2 <- p + theme(axis.title.x=element_text(hjust=0.5)) + xlab("X-axis at hjust=0.5")
p3 <- p + theme(axis.title.x=element_text(hjust=1)) + xlab("X-axis at hjust=1")

library(ggExtra)
align.plots(p1, p2, p3)

To explore what happens with vjust aligment of axis labels:

DF <- data.frame(x=c("a\na","b","cdefghijk","l"),y=1:4)
p <- ggplot(DF, aes(x,y)) + geom_point()

p1 <- p + theme(axis.text.x=element_text(vjust=0, colour="red")) + 
        xlab("X-axis labels aligned with vjust=0")
p2 <- p + theme(axis.text.x=element_text(vjust=0.5, colour="red")) + 
        xlab("X-axis labels aligned with vjust=0.5")
p3 <- p + theme(axis.text.x=element_text(vjust=1, colour="red")) + 
        xlab("X-axis labels aligned with vjust=1")


library(ggExtra)
align.plots(p1, p2, p3)

This worked for my purpose done within the Spyder Console

conda install -c anaconda pyserial

this format generally works however pymorph returned thus:

conda install -c anaconda pymorph Collecting package metadata (current_repodata.json): ...working... done Solving environment: ...working... failed with initial frozen solve. Retrying with flexible solve. Collecting package metadata (repodata.json): ...working... done Solving environment: ...working... failed with initial frozen solve. Retrying with flexible solve.

Note: you may need to restart the kernel to use updated packages.

PackagesNotFoundError: The following packages are not available from current channels:

• pymorph

Current channels:

• https://conda.anaconda.org/anaconda/win-64
• https://conda.anaconda.org/anaconda/noarch
• https://repo.anaconda.com/pkgs/main/win-64
• https://repo.anaconda.com/pkgs/main/noarch
• https://repo.anaconda.com/pkgs/r/win-64
• https://repo.anaconda.com/pkgs/r/noarch
• https://repo.anaconda.com/pkgs/msys2/win-64
• https://repo.anaconda.com/pkgs/msys2/noarch

To search for alternate channels that may provide the conda package you're looking for, navigate to

https://anaconda.org

and use the search bar at the top of the page.

I often want different columns to have different formats. Here is how I print a simple 2D array using some variety in the formatting by converting (slices of) my NumPy array to a tuple:

import numpy as np
dat = np.random.random((10,11))*100  # Array of random values between 0 and 100
print(dat)                           # Lines get truncated and are hard to read
for i in range(10):
    print((4*"%6.2f"+7*"%9.4f") % tuple(dat[i,:]))

void    QWidget::setWindowTitle ( const QString & )

EDIT: If you are using QtDesigner, on the property tab, there is an editable property called windowTitle which can be found under the QWidget section. The property tab can usually be found on the lower right part of the designer window.

Just for fun I thought I'd throw a forEach(f()) solution in too.

var a=[];
"14 2".split(" ").forEach(function(e){a.push(parseInt(e,10))});

// a = [14,2]

If it is inline, the browser should attempt to render it within the browser window. If it cannot, it will resort to an external program, prompting the user.

With attachment, it will immediately go to the user, and not try to load it in the browser, whether it can or not.

Yesterday, I got the same error: Failed building wheel for hddfancontrol when I ran pip3 install hddfancontrol. The result was Failed to build hddfancontrol. The cause was error: invalid command 'bdist_wheel' and Running setup.py bdist_wheel for hddfancontrol ... error. The error was fixed by running the following:

 pip3 install wheel

(From here.)

Alternatively, the "wheel" can be downloaded directly from here. When downloaded, it can be installed by running the following:

pip3 install "/the/file_path/to/wheel-0.32.3-py2.py3-none-any.whl"

If any one's trying to fetch all headers that were passed then just simply use:

dict(request.headers)

it gives you all the headers in a dict from which you can actually do whatever ops you want to. In my use case I had to forward all headers to another API since the python API was a proxy

The answer comes from the javadoc of ZoneId (emphasis mine) ...

A ZoneId is used to identify the rules used to convert between an Instant and a LocalDateTime. There are two distinct types of ID:

• Fixed offsets - a fully resolved offset from UTC/Greenwich, that uses the same offset for all local date-times
• Geographical regions - an area where a specific set of rules for finding the offset from UTC/Greenwich apply

Most fixed offsets are represented by ZoneOffset. Calling normalized() on any ZoneId will ensure that a fixed offset ID will be represented as a ZoneOffset.

... and from the javadoc of ZoneId#of (emphasis mine):

This method parses the ID producing a ZoneId or ZoneOffset. A ZoneOffset is returned if the ID is 'Z', or starts with '+' or '-'.

The argument id is specified as "UTC", therefore it will return a ZoneId with an offset, which also presented in the string form:

System.out.println(now.withZoneSameInstant(ZoneOffset.UTC));
System.out.println(now.withZoneSameInstant(ZoneId.of("UTC")));

Outputs:

2017-03-10T08:06:28.045Z
2017-03-10T08:06:28.045Z[UTC]

As you use the equals method for comparison, you check for object equivalence. Because of the described difference, the result of the evaluation is false.

When the normalized() method is used as proposed in the documentation, the comparison using equals will return true, as normalized() will return the corresponding ZoneOffset:

Normalizes the time-zone ID, returning a ZoneOffset where possible.

now.withZoneSameInstant(ZoneOffset.UTC)
    .equals(now.withZoneSameInstant(ZoneId.of("UTC").normalized())); // true

As the documentation states, if you use "Z" or "+0" as input id, of will return the ZoneOffset directly and there is no need to call normalized():

now.withZoneSameInstant(ZoneOffset.UTC).equals(now.withZoneSameInstant(ZoneId.of("Z"))); //true
now.withZoneSameInstant(ZoneOffset.UTC).equals(now.withZoneSameInstant(ZoneId.of("+0"))); //true

To check if they store the same date time, you can use the isEqual method instead:

now.withZoneSameInstant(ZoneOffset.UTC)
    .isEqual(now.withZoneSameInstant(ZoneId.of("UTC"))); // true

Sample

System.out.println("equals - ZoneId.of(\"UTC\"): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("UTC"))));
System.out.println("equals - ZoneId.of(\"UTC\").normalized(): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("UTC").normalized())));
System.out.println("equals - ZoneId.of(\"Z\"): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("Z"))));
System.out.println("equals - ZoneId.of(\"+0\"): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("+0"))));
System.out.println("isEqual - ZoneId.of(\"UTC\"): "+ nowZoneOffset
        .isEqual(now.withZoneSameInstant(ZoneId.of("UTC"))));

Output:

equals - ZoneId.of("UTC"): false
equals - ZoneId.of("UTC").normalized(): true
equals - ZoneId.of("Z"): true
equals - ZoneId.of("+0"): true
isEqual - ZoneId.of("UTC"): true

You can also do it like this:

BigDecimal A = new BigDecimal("10000000000");
BigDecimal B = new BigDecimal("20000000000");
BigDecimal C = new BigDecimal("30000000000");
BigDecimal resultSum = (A).add(B).add(C);
System.out.println("A+B+C= " + resultSum);

Prints:

A+B+C= 60000000000

I had the same issue on Ubuntu(14.04) with Jupyter.

To solve it I've added the dot library to python sys.path

First: check if dot is installed,

Then: find his path whereis dot -> /local/notebook/miniconda2/envs/ik2/bin/dot

Finally in python script : sys.path.append("/local/notebook/miniconda2/envs/ik2/bin/dot")

Maybe I'm not understanding the question but here is my simple solution that works -

# I want to Display total heads bent this machine so I define a label -
TotalHeadsLabel3 = Label(leftFrame)
TotalHeadsLabel3.config(font=Helv12,fg='blue',text="Total heads " + str(TotalHeads))
TotalHeadsLabel3.pack(side=TOP)

# I update the int variable adding the quantity bent -
TotalHeads = TotalHeads + headQtyBent # update ready to write to file & display
TotalHeadsLabel3.config(text="Total Heads "+str(TotalHeads)) # update label with new qty

I agree that labels are not automatically updated but can easily be updated with the

<label name>.config(text="<new text>" + str(<variable name>))

That just needs to be included in your code after the variable is updated.

Use the write()-Method of the Popup's document to put your markup there:

$.post(url, function (data) {
    var w = window.open('about:blank');
    w.document.open();
    w.document.write(data);
    w.document.close();
});

If you are having the issue on PHP Storm:

1. Close terminal tab
2. Open a new terminal tab

Output the images in a lossless format such as PNG:

ffmpeg.exe -i 10fps.h264 -r 10 -f image2 10fps.h264_%03d.png

Edit/Update: Not quite sure why I originally gave a strange filename example (with a possibly made-up extension).

I have since found that -vsync 0 is simpler than -r 10 because it avoids needing to know the frame rate.

This is something like what I currently use:

mkdir stills
ffmpeg -i my-film.mp4 -vsync 0 -f image2 stills/my-film-%06d.png

To extract only the key frames (which are likely to be of higher quality post-edit):

ffmpeg -skip_frame nokey -i my-film.mp4 -vsync 0 -f image2 stills/my-film-%06d.png

Then use another program (where you can more precisely specify quality, subsampling and DCT method – e.g. GIMP) to convert the PNGs you want to JPEG.

It is possible to obtain slightly sharper images in JPEG format this way than is possible with -qmin 1 -q:v 1 and outputting as JPEG directly from ffmpeg.

In an .htaccess file you need to use

Deny from  all

Put this in site/includes/.htaccess to make it specific to the includes directory

If you just wish to disallow a listing of directory files you can use

Options -Indexes 

Select table--> Design--> change value in Data Type shown in following Fig.

Save tables design.

try...

 java.sql.Time.valueOf("10:30:54");

jquery offers a variety of methods to hide the div in a timed manner that do not require setting up and later clearing or resetting interval timers or other event handlers. Here are a few examples.

Pure hide, one second delay

// hide in one second
$('#mydiv').delay(1000).hide(0); 

Pure hide, no delay

// hide immediately
$('#mydiv').delay(0).hide(0); 

Animated hide

// start hide in one second, take 1/2 second for animated hide effect
$('#mydiv').delay(1000).hide(500); 

fade out

// start fade out in one second, take 300ms to fade
$('#mydiv').delay(1000).fadeOut(300); 

Additionally, the methods can take a queue name or function as a second parameter (depending on method). Documentation for all the calls above and other related calls can be found here: https://api.jquery.com/category/effects/

import os
os.system("echo 'hello world'")

This should work. I do not know how to print the output into the python Shell.

Try these:

1. Make sure that output path of project is correct (Project > Properties > Build > Output path)

2. Go in menu to Build > Configuration Manager, and check if your main/entry project has checked Build. If not, check it.

I hope the below example will provide more clarity.

package main

type EmployeeManager struct{
    category            string
    city                string
    calculateSalary     func() int64
}


func NewEmployeeManager() (*EmployeeManager,error){

    return &EmployeeManager{
        category : "MANAGEMENT",
        city : "NY",
        calculateSalary: func() int64 {
            var calculatedSalary int64
            // some formula
            return calculatedSalary
        },
    },nil
}

func (self *EmployeeManager) emWithSalaryCalculation(){
    self.calculateSalary = func() int64 {
        var calculatedSalary int64
        // some new formula
        return calculatedSalary
    }
}

func updateEmployeeInfo(em EmployeeManager){
    // Some code
}

func processEmployee(){
    updateEmployeeInfo(struct {
        category        string
        city            string
        calculateSalary func() int64
    }{category: "", city: "", calculateSalary: func() int64 {
        var calculatedSalary int64
        // some new formula
        return calculatedSalary
    }})
}

According to this posting by the lead Jenkins developer, Kohsuke Kawaguchi, in 2009, there is no group support for the built-in Jenkins user database. Group support is only usable when integrating Jenkins with LDAP or Active Directory. This appears to be the same in 2012.

However, as Vadim wrote in his answer, you don't need group support for the built-in Jenkins user database, thanks to the Role strategy plug-in.

to send a .NET / C# powershell eMail use such a structure:

for best behaviour create a class with a method like this

 using (PowerShell PowerShellInstance = PowerShell.Create())
            {
                PowerShellInstance.AddCommand("Send-MailMessage")
                                  .AddParameter("SMTPServer", "smtp.xxx.com")
                                  .AddParameter("From", "[email protected]")
                                  .AddParameter("Subject", "xxx Notification")
                                  .AddParameter("Body", body_msg)
                                  .AddParameter("BodyAsHtml")
                                  .AddParameter("To", recipients);

                // invoke execution on the pipeline (ignore output) --> nothing will be displayed
                PowerShellInstance.Invoke();
            }              

Whereby these instance is called in a function like:

        public void sendEMailPowerShell(string body_msg, string[] recipients)

Never forget to use a string array for the recepients, which can be look like this:

string[] reportRecipient = { 
                        "xxx <[email protected]>",
                        "xxx <[email protected]>"
                        };

body_msg

this message can be overgiven as parameter to the method itself, HTML coding enabled!!

recipients

never forget to use a string array in case of multiple recipients, otherwise only the last address in the string will be used!!!

calling the function can look like this:

        mail reportMail = new mail(); //instantiate from class
        reportMail.sendEMailPowerShell(reportMessage, reportRecipient); //msg + email addresses

ThumbUp

sleep(1.0/24.0)

As to your follow up question if that's the best way: No, you could get not-so-smooth framerates because the rendering of each frame might not take the same amount of time.

You could try one of these solutions:

• Use a timer which fires 24 times a second with the drawing code.
• Create as many frames as possible, create the motion based on the time passed, not per frame.

Since AngularJS 1.3.4 you can use $setDirty() on fields (source). For example, for each field with error and marked required you can do the following:

angular.forEach($scope.form.$error.required, function(field) {
    field.$setDirty();
});

For me it worked to stash save all the changes before the commit and pop them out again. This made git re-analyze the added / deleted files and it correctly marked them as moved.

You cannot add a column with a default value in Hive. You have the right syntax for adding the column ALTER TABLE test1 ADD COLUMNS (access_count1 int);, you just need to get rid of default sum(max_count). No changes to that files backing your table will happen as a result of adding the column. Hive handles the "missing" data by interpreting NULL as the value for every cell in that column.

So now your have the problem of needing to populate the column. Unfortunately in Hive you essentially need to rewrite the whole table, this time with the column populated. It may be easier to rerun your original query with the new column. Or you could add the column to the table you have now, then select all of its columns plus value for the new column.

You also have the option to always COALESCE the column to your desired default and leave it NULL for now. This option fails when you want NULL to have a meaning distinct from your desired default. It also requires you to depend on always remembering to COALESCE.

If you are very confident in your abilities to deal with the files backing Hive, you could also directly alter them to add your default. In general I would recommend against this because most of the time it will be slower and more dangerous. There might be some case where it makes sense though, so I've included this option for completeness.

undefined index means the array key is not set , do a var_dump($_POST);die(); before the line that throws the error and see that you're trying to get an array key that does not exist.

In JavaScript 1.8.5, Object.getOwnPropertyNames returns an array of all properties found directly upon a given object.

Object.getOwnPropertyNames ( obj )

and another method Object.keys, which returns an array containing the names of all of the given object's own enumerable properties.

Object.keys( obj )

I used forEach to list values and keys in obj, same as for (var key in obj) ..

Object.keys(obj).forEach(function (key) {
      console.log( key , obj[key] );
});

This all are new features in ECMAScript , the mothods getOwnPropertyNames, keys won't supports old browser's.

If you are looking out at performance, you could have a look at the java.nio.* packages - those are supposedly faster than java.io.*

Or you could put your globals in the app.config

I think there's a more elegant way to solve the problem: send the stdout/stderr to syslog with an identifier and instruct your syslog manager to split its output by program name.

Use the following properties in your systemd service unit file:

StandardOutput=syslog
StandardError=syslog
SyslogIdentifier=<your program identifier> # without any quote

Then, assuming your distribution is using rsyslog to manage syslogs, create a file in /etc/rsyslog.d/<new_file>.conf with the following content:

if $programname == '<your program identifier>' then /path/to/log/file.log
& stop

Now make the log file writable by syslog:

# ls -alth /var/log/syslog 
-rw-r----- 1 syslog adm 439K Mar  5 19:35 /var/log/syslog
# chown syslog:adm /path/to/log/file.log

Restart rsyslog (sudo systemctl restart rsyslog) and enjoy! Your program stdout/stderr will still be available through journalctl (sudo journalctl -u <your program identifier>) but they will also be available in your file of choice.

Source via archive.org

Under Windows 7, open the Event Viewer. You can do this the way Gishu suggested for XP, typing eventvwr from the command line, or by opening the Control Panel, selecting System and Security, then Administrative Tools and finally Event Viewer. It may require UAC approval or an admin password.

In the left pane, expand Windows Logs and then System. You can filter the logs with Filter Current Log... from the Actions pane on the right and selecting "Service Control Manager." Or, depending on why you want this information, you might just need to look through the Error entries.

The actual log entry pane (not shown) is pretty user-friendly and self-explanatory. You'll be looking for messages like the following:

"The Praxco Assistant service entered the stopped state."
"The Windows Image Acquisition (WIA) service entered the running state."
"The MySQL service terminated unexpectedly. It has done this 3 time(s)."

Johan is close - it depends on the hardware manufacturer. For example, Samsung Galaxy S phones uses Samsung RFS (proprietary). However, the Nexus S (also made by Samsung) with Android 2.3 uses Ext4 (presumably because Google told them to - the Nexus S is the current Google experience phone). Many community developers have also started moving to Ext4 because of this shift.

npm install bootstrap --save

and add relevent files into angular.json file under the style property for css files and under scripts for JS files.

 "styles": [
  "../node_modules/bootstrap/dist/css/bootstrap.min.css",
   ....
]

Hi if you are having dropdownlist like this

<select id="testID">
<option value="1">Value1</option>
<option value="2">Value2</option>
<option value="3">Value3</option>
<option value="4">Value4</option>
<option value="5">Value5</option>
<option value="6">Value6</option>
</select>
<input type="button" value="Get dropdown selected Value" onclick="getHTML();">

after giving id to dropdownlist you just need to add jquery code like this

function getHTML()
{
      var display=$('#testID option:selected').html();
      alert(display);
}

include() needs a full file path, relative to the file system's root directory.

This should work:

 include_once("C:/xampp/htdocs/PoliticalForum/headerSite.php");

I did the CSS way with my install of Bootstrap 3.0.0, since I am not that familiar with LESS. Here is the code that I added to my custom css file (which I load after bootstrap.css) which allowed me to control so the menu was always working like an accordion.
Note: I wrapped my whole navbar inside a div with the class sidebar to separate out the behavior I wanted so it did not affect other navbars on my site, like the main menu. Adjust along your needs, hope it is of help.

/* Sidebar Menu Fix */

.sidebar .navbar-nav {
  margin: 7.5px -15px;
}
.sidebar .navbar-nav > li > a {
  padding-top: 10px;
  padding-bottom: 10px;
  line-height: 20px;
}
.sidebar .navbar-collapse {
  max-height: 500px;
}
.sidebar .navbar-nav .open .dropdown-menu {
  position: static;
  float: none;
  width: auto;
  margin-top: 0;
  background-color: transparent;
  border: 0;
  box-shadow: none;
}
.sidebar .dropdown-menu > li > a {
  color: #777777;
}
.sidebar .navbar-default .navbar-nav .open .dropdown-menu > li > a:hover,
.sidebar .navbar-default .navbar-nav .open .dropdown-menu > li > a:focus {
  color: #333333;
  background-color: transparent;
}
.sidebar .navbar-default .navbar-nav .open .dropdown-menu > .active > a,
.sidebar .navbar-default .navbar-nav .open .dropdown-menu > .active > a:hover,
.sidebar .navbar-default .navbar-nav .open .dropdown-menu > .active > a:focus {
  color: #555555;
  background-color: #e7e7e7;
}
.sidebar .navbar-nav {
  float: none;
}
.sidebar .navbar-nav > li {
  float: none;
}

Additional note: I also added a change to the toggle of the main menu navbar (since the code above on my site is used for a "submenu" on the side.

I changed:

<button type="button" class="navbar-toggle" data-toggle="collapse" data-target=".navbar-collapse">

into:

<button type="button" class="navbar-toggle" data-toggle="collapse" data-target=".navbar-collapse-topmenu">

And then also adjusted:

<div class="navbar-collapse collapse navbar-collapse">

into:

<div class="navbar-collapse collapse navbar-collapse-topmenu">

If you will only have one navbar I guess you will not need to worry about this, but it helped me in my case.

I know this doesn't use flexbox, but for the simple use-case of three items (one at left, one at center, one at right), this can be accomplished easily using display: grid on the parent, grid-area: 1/1/1/1; on the children, and justify-self for positioning of those children.

<div style="border: 1px solid red; display: grid; width: 100px; height: 25px;">_x000D_
  <div style="border: 1px solid blue; width: 25px; grid-area: 1/1/1/1; justify-self: left;"></div>_x000D_
  <div style="border: 1px solid blue; width: 25px; grid-area: 1/1/1/1; justify-self: center;"></div>_x000D_
  <div style="border: 1px solid blue; width: 25px; grid-area: 1/1/1/1; justify-self: right;"></div>_x000D_
</div>

To remove the special characters, try

var name = name.replace(/[!@#$%^&*]/g, "");

you can 'invoke' alternative bindings on Y this way:

...registered(X, Y), (Y=ct101; Y=ct102; Y=ct103).

Note the parenthesis are required to keep the correct execution control flow. The ;/2 it's the general or operator. For your restricted use you could as well choice the more idiomatic

...registered(X, Y), member(Y, [ct101,ct102,ct103]).

that on backtracking binds Y to each member of the list.

edit I understood with a delay your last requirement. If you want that Y match all 3 values the or is inappropriate, use instead

...registered(X, ct101), registered(X, ct102), registered(X, ct103).

or the more compact

...findall(Y, registered(X, Y), L), sort(L, [ct101,ct102,ct103]).

findall/3 build the list in the very same order that registered/2 succeeds. Then I use sort to ensure the matching.

...setof(Y, registered(X, Y), [ct101,ct102,ct103]).

setof/3 also sorts the result list

Another important thing you need to note with ".addEventListener is not a function" error is that the error might be coming a result of assigning it a wrong object eg consider

let myImages = ['images/pic1.jpg','images/pic2.jpg','images/pic3.jpg','images/pic4.jpg','images/pic5.jpg'];
let i = 0;
while(i < myImages.length){
  const newImage = document.createElement('img');
  newImage.setAttribute('src',myImages[i]);
  thumbBar.appendChild(newImage);

 //Code just below will bring the said error 
 myImages[i].addEventListener('click',fullImage);

 //Code just below execute properly 
  newImage.addEventListener('click',fullImage);




  i++;
}

In the code Above I am basically assigning images to a div element in my html dynamically using javascript. I've done this by writing the images in an array and looping them through a while loop and adding all of them to the div element.

I've then added a click event listener for all images.

The code "myImages[i].addEventListener('click',fullImage);" will give you an error of "addEventListener is not a function" because I am chaining an addEventListener to an array object which does not have the addEventListener() function.

However for the code "newImage.addEventListener('click',fullImage);" it executes properly because the newImage object has access the function addEventListener() while the array object does not.

For more clarification follow the link: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Errors/Not_a_function

Look into composite formatting:

Console.WriteLine("{0}.{1}.{2}", mon, da, yer);

You could also write (although it's not really recommended):

Console.WriteLine(mon + "." + da + "." + yer);

And, with the release of C# 6.0, you have string interpolation expressions:

Console.WriteLine($"{mon}.{da}.{yer}");  // note the $ prefix.

If you have the IDs stored in a temp table (which can be done by some C# function or simple SQL) then the problem becomes easy and doable in SQL.

select "all exist"
where (select case  when count(distinct t.id) = (select count(distinct id) from #products) then "true" else "false" end
    from ProductTable t, #products p
    where t.id = p.id) = "true"

This will return "all exists" when all the products in #products exist in the target table (ProductTable) and will not return a row if the above is not true.

If you are not willing to write to a temp table, then you need to feed in some parameter for the number of products you are attempting to find, and replace the temp table with an 'in'; clause so the subquery looks like this:

SELECT "All Exist"
WHERE(
        SELECT case when count(distinct t.id) = @ProductCount then "true" else "false" 
        FROM ProductTable t 
        WHERE t.id in (1,100,10,20) -- example IDs
) = "true"

This kind of query should work - after rewriting with explicit JOIN syntax:

SELECT something
FROM   master      parent
JOIN   master      child ON child.parent_id = parent.id
LEFT   JOIN second parentdata ON parentdata.id = parent.secondary_id
LEFT   JOIN second childdata ON childdata.id = child.secondary_id
WHERE  parent.parent_id = 'rootID'

The tripping wire here is that an explicit JOIN binds before "old style" CROSS JOIN with comma (,). I quote the manual here:

In any case JOIN binds more tightly than the commas separating FROM-list items.

After rewriting the first, all joins are applied left-to-right (logically - Postgres is free to rearrange tables in the query plan otherwise) and it works.

Just to make my point, this would work, too:

SELECT something
FROM   master parent
LEFT   JOIN second parentdata ON parentdata.id = parent.secondary_id
,      master child
LEFT   JOIN second childdata ON childdata.id = child.secondary_id
WHERE  child.parent_id = parent.id
AND    parent.parent_id = 'rootID'

But explicit JOIN syntax is generally preferable, as your case illustrates once again.

And be aware that multiple (LEFT) JOIN can multiply rows:

• Two SQL LEFT JOINS produce incorrect result

First of all, it's not very tidy to mix pylab and pyplot code. What's more, pyplot style is preferred over using pylab.

Here is a slightly cleaned up code, using only pyplot functions:

from matplotlib import pyplot

a = [ pow(10,i) for i in range(10) ]

pyplot.subplot(2,1,1)
pyplot.plot(a, color='blue', lw=2)
pyplot.yscale('log')
pyplot.show()

The relevant function is pyplot.yscale(). If you use the object-oriented version, replace it by the method Axes.set_yscale(). Remember that you can also change the scale of X axis, using pyplot.xscale() (or Axes.set_xscale()).

Check my question What is the difference between ‘log’ and ‘symlog’? to see a few examples of the graph scales that matplotlib offers.

I also encountered this problem in my project. It eventually worked after I inserted the my-controller.js into my karma.conf.js file, with the <script> tag.

Hope this will help. There are quite many reasons that can lead to this problem.

If you need a unique ID, you must first decide on your definition of unique. If you want/intend to use it for a copy-protection mechanism, then use something simple. This is because if someone really wants to use your software, (s)he will find a way to break your protection, given enough time and skill. In the case of a unique hardware ID, just think about virtual machines and you'll see that it is possible to spoof anything so someone can tamper with your software.

There is not much you can take from a PC and consider it as uniqueness over its whole lifetime. (Hardware changes will most likely require regenerating the ID at some point.) If you need something like that, you should investigate using an authentication USB Dongle which you can send to your customers.

If you just need some unique identifier that is not as hard to obtain, you could take the MAC address (unreliable), the OS serial number or the domain and user's name, but all of them are susceptible to forgery. However, if your main goal is to lock out unauthorised people, you won't sell anything because no one will want to use your software if it is hard to install, register or to move from one PC to another, although the last consideration is part and parcel of per-machine licensing. (This will likely happen quite often.)

As a first step, make it easy: Use something simple which is not easy to spoof in your target group. (For example, domain and user names can't be easily spoofed by enterprise customers, because their PCs are running in a larger environment implementing policies, etc.) Just forget about the others until you have that.

Maybe you can lock them out but that doesn't mean they're going to buy your software; they just won't use it anymore. What you have to consider is how many potential customers won't be or aren't willing to pay because you made it so complicated to use your program.

This is what I achieved, but had to set width, and it cannot be percentual.

.trunc{_x000D_
  width:250px; _x000D_
  white-space: nowrap; _x000D_
  overflow: hidden; _x000D_
  text-overflow: ellipsis;_x000D_
}_x000D_
table tr td {_x000D_
padding: 5px_x000D_
}_x000D_
table tr td {_x000D_
background: salmon_x000D_
}_x000D_
table tr td:first-child {_x000D_
background: lightsalmon_x000D_
}

<link href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.6/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.6/js/bootstrap.min.js"></script>_x000D_
<table>_x000D_
      _x000D_
      <tr>_x000D_
        <td>Quisque dignissim ante in tincidunt gravida. Maecenas lectus turpis</td>_x000D_
      <td>_x000D_
         <div class="trunc">Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum._x000D_
         </div>_x000D_
    </td>_x000D_
        </tr>_x000D_
      </table>

or this: http://collaboradev.com/2015/03/28/responsive-css-truncate-and-ellipsis/

Below is a 2-way extension class that supports:

• Timezone localization
• Input\output in seconds or milliseconds.

In OP's case, usage is:

DateTime.Now.ToUnixtime();

or

DateTime.UtcNow.ToUnixtime();

Even though a direct answer exists, I believe using a generic approach is better. Especially because it's most likely a project that needs a conversion like this, will also need these extensions anyway, so it's better to use the same tool for all.

    public static class UnixtimeExtensions
    {
        public static readonly DateTime UNIXTIME_ZERO_POINT = new DateTime(1970, 1, 1, 0, 0,0, DateTimeKind.Utc);

        /// <summary>
        /// Converts a Unix timestamp (UTC timezone by definition) into a DateTime object
        /// </summary>
        /// <param name="value">An input of Unix timestamp in seconds or milliseconds format</param>
        /// <param name="localize">should output be localized or remain in UTC timezone?</param>
        /// <param name="isInMilliseconds">Is input in milliseconds or seconds?</param>
        /// <returns></returns>
        public static DateTime FromUnixtime(this long value, bool localize = false, bool isInMilliseconds = true)
        {
            DateTime result;

            if (isInMilliseconds)
            {
                result = UNIXTIME_ZERO_POINT.AddMilliseconds(value);
            }
            else
            {
                result = UNIXTIME_ZERO_POINT.AddSeconds(value);
            }

            if (localize)
                return result.ToLocalTime();
            else
                return result;
        }

        /// <summary>
        /// Converts a DateTime object into a Unix time stamp
        /// </summary>
        /// <param name="value">any DateTime object as input</param>
        /// <param name="isInMilliseconds">Should output be in milliseconds or seconds?</param>
        /// <returns></returns>
        public static long ToUnixtime(this DateTime value, bool isInMilliseconds = true)
        {
            if (isInMilliseconds)
            {
                return (long)value.ToUniversalTime().Subtract(UNIXTIME_ZERO_POINT).TotalMilliseconds;
            }
            else
            {
                return (long)value.ToUniversalTime().Subtract(UNIXTIME_ZERO_POINT).TotalSeconds;
            }
        }
    }

After install react-router-dom

<Link
    to={{
      pathname: "/product-detail",
      productdetailProps: {
       productdetail: "I M passed From Props"
      }
   }}>
    Click To Pass Props
</Link>

and other end where the route is redirected do this

componentDidMount() {
            console.log("product props is", this.props.location.productdetailProps);
          }

If "ReferenceError: Model is not defined" error is raised, then you might try to use the following method:

$(document).ready(function () {

    @{  var serializer = new System.Web.Script.Serialization.JavaScriptSerializer();
         var json = serializer.Serialize(Model);
    }

    var model = @Html.Raw(json);
    if(model != null && @Html.Raw(json) != "undefined")
    {
        var id= model.Id;
        var mainFloorPlanId = model.MainFloorPlanId ;
        var imageDirectory = model.ImageDirectory ;
        var iconsDirectory = model.IconsDirectory ;
    }
});

Hope this helps...

As of JDK 8u102, the posted solutions relying on reflection will no longer work: the field that these solutions set is now final (https://bugs.openjdk.java.net/browse/JDK-8149417).

Looks like it's back to either (a) using Bouncy Castle, or (b) installing the JCE policy files.

Array has a length property :

[].length // 0
[0].length // 1
[4, 8, 15, 16, 23, 42].length // 6

This can be caused by the two sides of the connection disagreeing over whether the connection timed out or not during a keepalive. (Your code tries to reused the connection just as the server is closing it because it has been idle for too long.) You should basically just retry the operation over a new connection. (I'm surprised your library doesn't do this automatically.)

printf doesn't do that -- and printf is overkill for printing a single character.

char c = '*';
int count = 42;
for (i = 0; i < count; i ++) {
    putchar(c);
}

Don't worry about this being inefficient; putchar() buffers its output, so it won't perform a physical output operation for each character unless it needs to.

You could use the Laravel query builder, but this is not the best way to do it.

Check Wader's answer below for the Eloquent way - which is better as it allows you to check that there is actually a user that matches the email address, and handle the error if there isn't.

DB::table('users')
        ->where('email', $userEmail)  // find your user by their email
        ->limit(1)  // optional - to ensure only one record is updated.
        ->update(array('member_type' => $plan));  // update the record in the DB. 

If you have multiple fields to update you can simply add more values to that array at the end.

.SILENT:

Type " .SILENT: " in the beginning of your script without colons.

If you like Vim, it has built-in syntax highlighting for the syslog file, e.g. it will highlight error messages in red.

vi +'syntax on' /var/log/syslog

For those with a C++ background, you may be interested in a comparison with the C++ equivalent:

class S
{
private: // this is not quite true, in Ruby you can still access these
  static int    k = 23;
  int           s = 15;

public:
  int get_s() { return s; }
  static int get_k() { return k; }

};

std::cerr << S::k() << "\n";

S instance;
std::cerr << instance.s() << "\n";
std::cerr << instance.k() << "\n";

As we can see, k is a static like variable. This is 100% like a global variable, except that it's owned by the class (scoped to be correct). This makes it easier to avoid clashes between similarly named variables. Like any global variable, there is just one instance of that variable and modifying it is always visible by all.

On the other hand, s is an object specific value. Each object has its own instance of the value. In C++, you must create an instance to have access to that variable. In Ruby, the class definition is itself an instance of the class (in JavaScript, this is called a prototype), therefore you can access s from the class without additional instantiation. The class instance can be modified, but modification of s is going to be specific to each instance (each object of type S). So modifying one will not change the value in another.