Use var instead of int for your clicks variable generation and onClick instead of click as your function name:

var clicks = 0;

function onClick() {
  clicks += 1;
  document.getElementById("clicks").innerHTML = clicks;
};

<button type="button" onClick="onClick()">Click me</button>
<p>Clicks: <a id="clicks">0</a></p>

In JavaScript variables are declared with the var keyword. There are no tags like int, bool, string... to declare variables. You can get the type of a variable with 'typeof(yourvariable)', more support about this you find on Google.

And the name 'click' is reserved by JavaScript for function names so you have to use something else.

If you have Exchange 2010:

(In my case, the error message didn't contain " for [email protected]")

This shows how to add a receive connector: http://exchangeserverpro.com/how-to-configure-a-relay-connector-for-exchange-server-2010/

But I also needed to perform a step found here: http://recover-email.blogspot.com.au/2013/12/how-to-solve-exchange-smtp-server-error.html

• Go to Exchange Management Shell and run the command
• Get-ReceiveConnector "JiraTest" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "ms-Exch-SMTP-Accept-Any-Recipient"

While working on this, I ran the following on the affected server's PowerShell console until the error went away:

Send-MailMessage -From "[email protected]" -To "[email protected]" -Subject "Test Email" -Body "This is a test"

Change the 5 to 5.0. You're getting integer division.

Function map is a good choice when dealing with object arrays. Although there have been a number of good answers posted already, the example of using map with combination with filter might be helpful.

In case you want to exclude the properties which values are undefined or exclude just a specific property, you could do the following:

    var obj = {value1: "val1", value2: "val2", Ndb_No: "testing", myVal: undefined};
    var keysFiltered = Object.keys(obj).filter(function(item){return !(item == "Ndb_No" || obj[item] == undefined)});
    var valuesFiltered = keysFiltered.map(function(item) {return obj[item]});

https://jsfiddle.net/ohea7mgk/

You can use statement body in lamba expression for IEnumerable collections. try this one:

Obj[] myArray = objects.AsEnumerable().Select(o =>
{
    var someLocalVar = o.someVar;

    return new Obj() 
    { 
        Var1 = someLocalVar,
        Var2 = o.var2 
    };
}).ToArray();

Notice:
Think carefully when using this method, because this way, you will have all query result in memory, that may have unwanted side effects on the rest of your code.

Use calander and try this code.

Calendar calendar = Calendar.getInstance();         
calendar.add(Calendar.MONTH, 1);
calendar.set(Calendar.DATE, calendar.getActualMinimum(Calendar.DAY_OF_MONTH));
Date nextMonthFirstDay = calendar.getTime();
calendar.set(Calendar.DATE, calendar.getActualMaximum(Calendar.DAY_OF_MONTH));
Date nextMonthLastDay = calendar.getTime();

If Elasticsearch cluster is not accessible (e.g. behind firewall), but Kibana is:

Kibana => DevTools => Console:

GET /_cluster/health 

Apple users can download your .apk file, however they cannot run it. It is a different file format than iPhone apps (.ipa)

This question has several answers but I want to add something more because when I used unset or array_diff I had several problems to play with the indexes of the new array when the specific element was removed (because the initial index are saved)

I get back to the example :

$array = array('apple', 'orange', 'strawberry', 'blueberry', 'kiwi');
$array_without_strawberries = array_diff($array, array('strawberry'));

or

$array = array('apple', 'orange', 'strawberry', 'blueberry', 'kiwi');
unset($array[array_search('strawberry', $array)]);

If you print the result you will obtain :

foreach ($array_without_strawberries as $data) {
   print_r($data);
}

Result :

> apple
> orange
> blueberry
> kiwi

But the indexes will be saved and so you will access to your element like :

$array_without_strawberries[0] > apple
$array_without_strawberries[1] > orange
$array_without_strawberries[3] > blueberry
$array_without_strawberries[4] > kiwi

And so the final array are not re-indexed. So you need to add after the unset or array_diff:

$array_without_strawberries = array_values($array);

After that your array will have a normal index :

$array_without_strawberries[0] > apple
$array_without_strawberries[1] > orange
$array_without_strawberries[2] > blueberry
$array_without_strawberries[3] > kiwi

Related to this post : Re-Index Array

Hope it will help

I'd use the RANK() function in a subselect and then just pull the row where rank = 1.

select person, language
from
( 
    select person, language, rank() over(order by language) as rank
    from table A
    group by person, language
)
where rank = 1

There are several problems here:

1. The newdata argument of predict() needs a predictor variable. You should thus pass it values for Coupon, instead of Total, which is the response variable in your model.

2. The predictor variable needs to be passed in as a named column in a data frame, so that predict() knows what the numbers its been handed represent. (The need for this becomes clear when you consider more complicated models, having more than one predictor variable).

3. For this to work, your original call should pass df in through the data argument, rather than using it directly in your formula. (This way, the name of the column in newdata will be able to match the name on the RHS of the formula).

With those changes incorporated, this will work:

model <- lm(Total ~ Coupon, data=df)
new <- data.frame(Coupon = df$Coupon)
predict(model, newdata = new, interval="confidence")

This should get you for starting with two letters and ending with two numbers.

[A-Za-z]{2}(.*)[0-9]{2}

If you know it will always be just two and two you can

[A-Za-z]{2}[0-9]{2}

I was struggling with this for some time and after some help on a post I was able to come up with this formula =(DATEVALUE(LEFT(XX,10)))+(TIMEVALUE(MID(XX,12,5))) where XX is the cell in reference.

I've come across many other forums with people asking the same thing and this, to me, seems to be the simplest answer. What this will do is return text that is copied in from this format 2014/11/20 11:53 EST and turn it in to a Date/Time format so it can be sorted oldest to newest. It works with short date/long date and if you want the time just format the cell to display time and it will show. Hope this helps anyone who goes searching around like I did.

0755 = User:rwx Group:r-x World:r-x

0750 = User:rwx Group:r-x World:--- (i.e. World: no access)

r = read
w = write
x = execute (traverse for directories)

With Sequel Pro:

Restarting the app unlocked my tables. It resets the session connection.

NOTE: I was doing this for a site on my local machine.

http://www.mrexcel.com/td0097.html

Dim WS as Worksheet
Set WS = Sheets.Add

You don't have to know where it's located, or what it's name is, you just refer to it as WS.
If you still want to do this the "old fashioned" way, try this:

Sheets.Add.Name = "Test"

Yes, people use these terms interchangeably with regard to MySQL. Though oftentimes you will hear people inappropriately refer to the entire database server as the database.

To build on other answers above, in case you have a Spring boot REST service application (not Spring MVC) with Spring security, then enabling CORS via Spring security is enough (if you use Spring MVC then using a WebMvcConfigurer bean as mentioned by Yogen could be the way to go as Spring security will delegate to the CORS definition mentioned therein)

So you need to have a security config that does the following:

@Configuration
@EnableWebSecurity
public class SecurityConfig extends WebSecurityConfigurerAdapter {

@Override
protected void configure(HttpSecurity http) throws Exception {
    //other http security config
    http.cors().configurationSource(corsConfigurationSource());
}

//This can be customized as required
CorsConfigurationSource corsConfigurationSource() {
    CorsConfiguration configuration = new CorsConfiguration();
    List<String> allowOrigins = Arrays.asList("*");
    configuration.setAllowedOrigins(allowOrigins);
    configuration.setAllowedMethods(singletonList("*"));
    configuration.setAllowedHeaders(singletonList("*"));
    //in case authentication is enabled this flag MUST be set, otherwise CORS requests will fail
    configuration.setAllowCredentials(true);
    UrlBasedCorsConfigurationSource source = new UrlBasedCorsConfigurationSource();
    source.registerCorsConfiguration("/**", configuration);
    return source;
}

}

This link has more information on the same: https://docs.spring.io/spring-security/site/docs/current/reference/htmlsingle/#cors

Note:

1. Enabling CORS for all origins (*) for a prod deployed application may not always be a good idea.
2. CSRF can be enabled via the Spring HttpSecurity customization without any issues
3. In case you have authentication enabled in the app with Spring (via a UserDetailsService for example) then the configuration.setAllowCredentials(true); must be added

Tested for Spring boot 2.0.0.RELEASE (i.e., Spring 5.0.4.RELEASE and Spring security 5.0.3.RELEASE)

private static final String FILE_LOCATION = "com/input/file/somefile.txt";

//Method Body


InputStream invalidCharacterInputStream = URLClassLoader.getSystemResourceAsStream(FILE_LOCATION);

Getting this from getSystemResourceAsStream is the best option. By getting the inputstream rather than the file or the URL, works in a JAR file and as stand alone.

I had issues installing Express on Ubuntu:

If for some reason NPM command is missing, test npm command with npm help. If not there, follow these steps - http://arnolog.net/post/8424207595/installing-node-js-npm-express-mongoose-on-ubuntu

If just the Express command is not working, try:

sudo npm install -g express

This made everything work as I'm used to with Windows7 and OSX.

Hope this helps!

Close all browsers and tabs to ensure that the ActiveX control is not reside in memory. Open a fresh IE9 browser. Select Tools->Manage Add-ons. Change the drop down to "All add-ons" since the default only shows ones that are loaded.

Now select the add-on you wish to remove. There will be a link displayed on the lower left that says "More information". Click it.

This opens a further dialog that allows you to safely un-install the ActiveX control.

If you follow the direction of manually running the 'regsvr32' to remove the OCX it is not sufficient. ActiveX controls are wrapped up as signed CAB files and they extract to multiple DLLs and OCXs potentially. You wish to use IE to safely and correctly unregister every COM DLL and OCX.

There you have it! The problem is that in IE 9 it is somewhat hidden since you have to click the "More information" whereas IE8 you could do it from the same UI.

I clicked on this button and it worked for me.

Here is the screenshot

You can parse a string into an integer with int.parse(). For example:

var myInt = int.parse('12345');
assert(myInt is int);
print(myInt); // 12345

Note that int.parse() accepts 0x prefixed strings. Otherwise the input is treated as base-10.

You can parse a string into a double with double.parse(). For example:

var myDouble = double.parse('123.45');
assert(myDouble is double);
print(myDouble); // 123.45

parse() will throw FormatException if it cannot parse the input.

Why not this very simple method:

$i = 0; //a counter to track which element we are at
foreach($array as $index => $value) {
    $i++;
    if( $i == sizeof($array) ){
        //we are at the last element of the array
    }
}

I have found that at times even verifying the settings under Options --> Statement Completion (the answer above) doesn't work. In this case, saving and restarting Visual Studio will re-enable Intellisense.

Finally, this link has a list of other ways to troubleshoot Intellisense, broken down by language (for more specific errors).

http://msdn.microsoft.com/en-us/library/vstudio/ecfczya1(v=vs.100).aspx

The negated set of everything that is not alphanumeric & underscore for ASCII chars:

/[^\W]/g

For email or username validation i've used the following expression that allows 4 standard special characters - _ . @

/^[-.@_a-z0-9]+$/gi

For a strict alphanumeric only expression use:

/^[a-z0-9]+$/gi

Test @ RegExr.com

Here's another one:

PS> Search-ADAccount -Locked | Select Name, LockedOut, LastLogonDate

Name                                       LockedOut LastLogonDate
----                                       --------- -------------
Yxxxxxxx                                        True 14/11/2014 10:19:20
Bxxxxxxx                                        True 18/11/2014 08:38:34
Administrator                                   True 03/11/2014 20:32:05

Other parameters worth mentioning:

Search-ADAccount -AccountExpired
Search-ADAccount -AccountDisabled
Search-ADAccount -AccountInactive

Get-Help Search-ADAccount -ShowWindow

function myFunction(){
  for(var i = 0;i < n;i++){
    for(var m = 0;m < n;m++){
      if(/*break condition*/){
        goto out;
      }
    }
  }
out:
 //your out of the loop;
}

Here's a better method, if you're using Rails:

params.symbolize_keys

The end.

If you're not, just rip off their code (it's also in the link):

myhash.keys.each do |key|
  myhash[(key.to_sym rescue key) || key] = myhash.delete(key)
end

A nice approach that i have seen often and I had been used actually is to inject some NULL type element (or a created one, like uint THIS_IS_INFINITY = 82862863263;) at end of the array.

Then at the loop condition check, TYPE *pagesWords is some kind of pointer array:

int pagesWordsLength = sizeof(pagesWords) / sizeof(pagesWords[0]);

realloc (pagesWords, sizeof(pagesWords[0]) * (pagesWordsLength + 1);

pagesWords[pagesWordsLength] = MY_NULL;

for (uint i = 0; i < 1000; i++)
{
  if (pagesWords[i] == MY_NULL)
  {
    break;
  }
}

This solution won't word if array is filled with struct types.

You should always try to use a composite object with concrete types (using composite design pattern) rather than a list of object types. Who would remember what the heck each of those objects is? Think about maintenance of your code later on... Instead, try something like this:

Public (Class or Structure) MyPerson
                public string FirstName { get; set; }
                public string LastName { get; set; }
                public string Address { get; set; }
                public int ZipCode { get; set; }
End Class

And then:

Dim person as new MyPerson With { .FirstName = “Joe”,
                                  .LastName = "Smith”,
                                  ...
                                 }
backgroundWorker1.RunWorkerAsync(person)

and then:

private void backgroundWorker1_DoWork (object sender, DoWorkEventArgs e)
{
        MyPerson person = e.Argument as MyPerson
        string firstname = person.FirstName;
        string lastname = person.LastName;
        int zipcode = person.ZipCode;                                 
}

When you store something in an array , its size needs to be known (since array indexing relies on the size). Per the C++ standard It is unspecified whether or not a reference requires storage, as a result indexing an array of references would not be possible.

Right click on drawable folder_new_file- click on advanced button_ link to file in the file system_ then click on browse. finish

One possibility which has not been mentioned so far is that you might not be editing the file you think you are. i.e. your editor might have a different cwd than you had in mind.

Run 'more' on the file you're compiling to double check that it does indeed have the contents you hope it does. Hope that helps!

A lot of people, including me, use sqlfiddle.com to test SQL.

If I understand, what you want to do is disregard the orientation of the UIImage? If so then you could do this:-

//image is your original image
image = [UIImage imageWithCGImage:[image CGImage]
                             scale:[image scale]
                       orientation: UIImageOrientationUp];

or in Swift :-

image = UIImage(CGImage: image.CGImage!, scale: image.scale, orientation:.Up)

It solved my cropping issue.. Hope, this is what you're looking for..

If you are changing the hrefs, you can assign an id to the links <a href="#sample-tab-1" id="tab1"><span>One</span></a> so you can find the tab index by it's id.

Sample DF:

In [79]: df = pd.DataFrame(np.random.randint(5, 15, (10, 3)), columns=list('abc'))

In [80]: df
Out[80]:
    a   b   c
0   6  11  11
1  14   7   8
2  13   5  11
3  13   7  11
4  13   5   9
5   5  11   9
6   9   8   6
7   5  11  10
8   8  10  14
9   7  14  13

present only those rows where b > 10

In [81]: df[df.b > 10]
Out[81]:
   a   b   c
0  6  11  11
5  5  11   9
7  5  11  10
9  7  14  13

Minimums (for all columns) for the rows satisfying b > 10 condition

In [82]: df[df.b > 10].min()
Out[82]:
a     5
b    11
c     9
dtype: int32

Minimum (for the b column) for the rows satisfying b > 10 condition

In [84]: df.loc[df.b > 10, 'b'].min()
Out[84]: 11

UPDATE: starting from Pandas 0.20.1 the .ix indexer is deprecated, in favor of the more strict .iloc and .loc indexers.

Similar issues arise when a new project has to be created, and you want a different project folder name than the project name.

When you create a new project, it gets stored at

./path/to/pro/ject/YourProject/YourProject.**proj

Let's assume you wanted to have it directly in the ject folder:

./path/to/pro/ject/YourProject.**proj

My workaround to accomplish this is to create the project with the last part of the path as its name, so that it doesn't create an additional directory:

./path/to/pro/ject/ject.**proj

When you now rename the project from within Visual Studio, you achieve the goal without having to leave Visual Studio:

./path/to/pro/ject/YourProject.**proj

The downside of this approach is that you have to adjust the default namespace and the name of the Output binary as well, and that you have to update namespaces in all files that are included within the project template.

One of the variables has not been given any value, thus it is a NoneType. You'll have to look into why this is, it's probably a simple logic error on your part.

Updated ES6 version

const truncateString = (string, maxLength = 50) => {
  if (!string) return null;
  if (string.length <= maxLength) return string;
  return `${string.substring(0, maxLength)}...`;
};

truncateString('what up', 4); // returns 'what...'

Simply put this in your code:

Application.WorksheetFunction.Subtotal(3, Range("A2:A500000"))

Make sure you apply the correct range, but just keep it to ONE column

I put this for future visitors:

if you are receiving the error on creating an Exception object, then the cause of it probably is a lack of definition for what() virtual function.

Here is one using .padStart():

<!DOCTYPE html>
<html lang='en'>
<head>
  <meta charset='UTF-8' />
  <title>timer</title>
</head>
<body>
  <span id="minutes">00</span>:<span id="seconds">00</span>

  <script>
    const minutes = document.querySelector("#minutes")
    const seconds = document.querySelector("#seconds")
    let count = 0;

    const renderTimer = () => {
      count += 1;
      minutes.innerHTML = Math.floor(count / 60).toString().padStart(2, "0");
      seconds.innerHTML = (count % 60).toString().padStart(2, "0");
    }

    const timer = setInterval(renderTimer, 1000)
  </script>
</body>
</html>

From MDN:

The padStart() method pads the current string with another string (repeated, if needed) so that the resulting string reaches the given length. The padding is applied from the start (left) of the current string.

It is correctly mentioned in the error: you cannot make a static reference to non-static type T. The reason is the type parameter T can be replaced by any of the type argument e.g. Clazz<String> or Clazz<integer> etc. But static fields/methods are shared by all non-static objects of the class.

The following excerpt is taken from the doc:

A class's static field is a class-level variable shared by all non-static objects of the class. Hence, static fields of type parameters are not allowed. Consider the following class:

public class MobileDevice<T> {
    private static T os;

    // ...
}

If static fields of type parameters were allowed, then the following code would be confused:

MobileDevice<Smartphone> phone = new MobileDevice<>();
MobileDevice<Pager> pager = new MobileDevice<>();
MobileDevice<TabletPC> pc = new MobileDevice<>();

Because the static field os is shared by phone, pager, and pc, what is the actual type of os? It cannot be Smartphone, Pager, and TabletPC at the same time. You cannot, therefore, create static fields of type parameters.

As rightly pointed out by chris in his answer you need to use type parameter with the method and not with the class in this case. You can write it like:

static <E> void doIt(E object) 

Here is another simple solution

try
{
    int temp=Convert.ToInt32(txtEvDistance.Text);
}
catch(Exception h)
{
    MessageBox.Show("Please provide number only");
}

I think that it should be:

$path = 'myfolder/myimage.png';
$type = pathinfo($path, PATHINFO_EXTENSION);
$data = file_get_contents($path);
$base64 = 'data:image/' . $type . ';base64,' . base64_encode($data);

I could do this in a JUnit Test Setup.

I wanted to test a Hibernate facade so I was looking for a generic way to do it. Note that the facade also implements a generic interface. Here T is the database class and U the primary key. Ifacade<T,U> is a facade to access the database object T with the primary key U.

public abstract class GenericJPAController<T, U, C extends IFacade<T,U>>

{
    protected static EntityManagerFactory emf;

    /* The properties definition is straightforward*/
    protected T testObject;
    protected C facadeManager;

    @BeforeClass
    public static void setUpClass() {


        try {
            emf = Persistence.createEntityManagerFactory("my entity manager factory");

        } catch (Throwable ex) {
            System.err.println("Failed to create sessionFactory object." + ex);
            throw new ExceptionInInitializerError(ex);
        }

    }

    @AfterClass
    public static void tearDownClass() {
    }

    @Before
    public void setUp() {
    /* Get the class name*/
        String className = ((ParameterizedType) getClass().getGenericSuperclass()).getActualTypeArguments()[2].getTypeName();

        /* Create the instance */
        try {
            facadeManager = (C) Class.forName(className).newInstance();
        } catch (ClassNotFoundException | InstantiationException | IllegalAccessException ex) {
            Logger.getLogger(GenericJPAController.class.getName()).log(Level.SEVERE, null, ex);
        }
        createTestObject();
    }

    @After
    public void tearDown() {
    }

    /**
     * Test of testFindTEntities_0args method, of class
     * GenericJPAController<T, U, C extends IFacade<T,U>>.
     * @throws java.lang.ClassNotFoundException
     * @throws java.lang.NoSuchMethodException
     * @throws java.lang.InstantiationException
     * @throws java.lang.IllegalAccessException
     */
    @Test
    public void  testFindTEntities_0args() throws ClassNotFoundException, NoSuchMethodException, InstantiationException, IllegalAccessException {

        /* Example of instance usage. Even intellisense (NetBeans) works here!*/
        try {
            List<T> lista = (List<T>) facadeManager.findAllEntities();
            lista.stream().forEach((ct) -> {
                System.out.println("Find all: " + stringReport());
            });
        } catch (Throwable ex) {
            System.err.println("Failed to access object." + ex);
            throw new ExceptionInInitializerError(ex);
        }
    }


    /**
     *
     * @return
     */
    public abstract String stringReport();

    protected abstract T createTestObject();
    protected abstract T editTestObject();
    protected abstract U getTextObjectIndex();
}

Since your second question is more concrete, I'm going to address it first, and then take up your first question with the context given by the second. I wanted to give a more evidence-based answer than what's here already.

Question #2: Do most compilers realize that the variable has already been declared and just skip that portion, or does it actually create a spot for it in memory each time?

You can answer this question for yourself by stopping your compiler before the assembler is run and looking at the asm. (Use the -S flag if your compiler has a gcc-style interface, and -masm=intel if you want the syntax style I'm using here.)

In any case, with modern compilers (gcc 10.2, clang 11.0) for x86-64, they only reload the variable on each loop pass if you disable optimizations. Consider the following C++ program—for intuitive mapping to asm, I'm keeping things mostly C-style and using an integer instead of a string, although the same principles apply in the string case:

#include <iostream>

static constexpr std::size_t LEN = 10;

void fill_arr(int a[LEN])
{
    /* *** */
    for (std::size_t i = 0; i < LEN; ++i) {
        const int t = 8;

        a[i] = t;
    }
    /* *** */
}

int main(void)
{
    int a[LEN];

    fill_arr(a);

    for (std::size_t i = 0; i < LEN; ++i) {
        std::cout << a[i] << " ";
    }

    std::cout << "\n";

    return 0;
}

We can compare this to a version with the following difference:

    /* *** */
    const int t = 8;

    for (std::size_t i = 0; i < LEN; ++i) {
        a[i] = t;
    }
    /* *** */

With optimization disabled, gcc 10.2 puts 8 on the stack on every pass of the loop for the declaration-in-loop version:

    mov QWORD PTR -8[rbp], 0
.L3:
    cmp QWORD PTR -8[rbp], 9
    ja  .L4
    mov DWORD PTR -12[rbp], 8 ;?

whereas it only does it once for the out-of-loop version:

    mov DWORD PTR -12[rbp], 8 ;?
    mov QWORD PTR -8[rbp], 0
.L3:
    cmp QWORD PTR -8[rbp], 9
    ja  .L4

Does this make a performance impact? I didn't see an appreciable difference in runtime between them with my CPU (Intel i7-7700K) until I pushed the number of iterations into the billions, and even then the average difference was less than 0.01s. It's only a single extra operation in the loop, after all. (For a string, the difference in in-loop operations is obviously a bit greater, but not dramatically so.)

What's more, the question is largely academic, because with an optimization level of -O1 or higher gcc outputs identical asm for both source files, as does clang. So, at least for simple cases like this, it's unlikely to make any performance impact either way. Of course, in a real-world program, you should always profile rather than make assumptions.

Question #1: Is declaring a variable inside a loop a good practice or bad practice?

As with practically every question like this, it depends. If the declaration is inside a very tight loop and you're compiling without optimizations, say for debugging purposes, it's theoretically possible that moving it outside the loop would improve performance enough to be handy during your debugging efforts. If so, it might be sensible, at least while you're debugging. And although I don't think it's likely to make any difference in an optimized build, if you do observe one, you/your pair/your team can make a judgement call as to whether it's worth it.

At the same time, you have to consider not only how the compiler reads your code, but also how it comes off to humans, yourself included. I think you'll agree that a variable declared in the smallest scope possible is easier to keep track of. If it's outside the loop, it implies that it's needed outside the loop, which is confusing if that's not actually the case. In a big codebase, little confusions like this add up over time and become fatiguing after hours of work, and can lead to silly bugs. That can be much more costly than what you reap from a slight performance improvement, depending on the use case.

The right way to do it:

In .NET Core you can inject the IConfiguration as a parameter into your Class constructor, and it will be available.

public class MyClass 
{
    private IConfiguration configuration;
    public MyClass(IConfiguration configuration)
    {
        ConnectionString = new configuration.GetValue<string>("ConnectionString");
    }

Now, when you want to create an instance of your class, since your class gets injected the IConfiguration, you won't be able to just do new MyClass(), because it needs a IConfiguration parameter injected into the constructor, so, you will need to inject your class as well to the injecting chain, which means two simple steps:

1) Add your Class/es - where you want to use the IConfiguration, to the IServiceCollection at the ConfigureServices() method in Startup.cs

services.AddTransient<MyClass>();

2) Define an instance - let's say in the Controller, and inject it using the constructor:

public class MyController : ControllerBase
{
    private MyClass _myClass;
    public MyController(MyClass myClass)
    {
        _myClass = myClass;
    }

Now you should be able to enjoy your _myClass.configuration freely...

Another option:

If you are still looking for a way to have it available without having to inject the classes into the controller, then you can store it in a static class, which you will configure in the Startup.cs, something like:

public static class MyAppData
{
    public static IConfiguration Configuration;
}

And your Startup constructor should look like this:

public Startup(IConfiguration configuration)
{
    Configuration = configuration;
    MyAppData.Configuration = configuration;
}

Then use MyAppData.Configuration anywhere in your program.

Don't confront me why the first option is the right way, I can just see experienced developers always avoid garbage data along their way, and it's well understood that it's not the best practice to have loads of data available in memory all the time, neither is it good for performance and nor for development, and perhaps it's also more secure to only have with you what you need.

One other way could be this:

        var json_arr = {};
        json_arr["name1"] = "value1";
        json_arr["name2"] = "value2";
        json_arr["name3"] = "value3";

        var json_string = JSON.stringify(json_arr);

The issue of being forced to trigger('change') drove me nuts, as I had custom code in the change trigger, which should only trigger when the user changes the option in the dropdown. IMO, change should not be triggered when setting an init value at the start.

I dug deep and found the following: https://github.com/select2/select2/issues/3620

Example:

$dropDown.val(1).trigger('change.select2');

C-style casts conflate const_cast, static_cast, and reinterpret_cast.

I wish C++ didn't have C-style casts. C++ casts stand out properly (as they should; casts are normally indicative of doing something bad) and properly distinguish between the different kinds of conversion that casts perform. They also permit similar-looking functions to be written, e.g. boost::lexical_cast, which is quite nice from a consistency perspective.

You should be able to add the Java Development Tools by selecting 'Help' -> 'Install New Software', there you select the 'Juno' update site, then 'Programming Languages' -> 'Eclipse Java Development Tools'.

After that, you will be able to run your JUnit tests with 'Right Click' -> 'Run as' -> 'JUnit test'.

I had the same issue get value for my property in my service class. I resolved it by using @ConfigurationProperties instead of @Value.

1. create a class like this:

    import org.springframework.boot.context.properties.ConfigurationProperties;

    @ConfigurationProperties(prefix = "file")
    public class FileProperties {
        private String directory;

        public String getDirectory() {
            return directory;
        }

        public void setDirectory(String dir) {
            this.directory = dir;
        }
    }

2. add the following to your BootApplication class:

    @EnableConfigurationProperties({
        FileProperties.class
    })

3. Inject FileProperties to your PrintProperty class, then you can get hold of the property through the getter method.

I offer one more solution in case it is worthful for someone else.

I have a history.js file where I have the following:

import createHistory from 'history/createBrowserHistory'
const history = createHistory()
history.pushLater = (...args) => setImmediate(() => history.push(...args))
export default history

Next, on my Root where I define my router I use the following:

import history from '../history'
import { Provider } from 'react-redux'
import { Router, Route, Switch } from 'react-router-dom'

export default class Root extends React.Component {
  render() {
    return (
     <Provider store={store}>
      <Router history={history}>
       <Switch>
        ...
       </Switch>
      </Router>
     </Provider>
    )
   }
  }

Finally, on my actions.js I import History and make use of pushLater

import history from './history'
export const login = createAction(
...
history.pushLater({ pathname: PATH_REDIRECT_LOGIN })
...)

This way, I can push to new actions after API calls.

Hope it helps!

theView.post(new Runnable() {
    String str;
    @Override                            
    public void run() {
        par.Log(str);                              
    }
    public Runnable init(String pstr) {
        this.str=pstr;
        return(this);
    }
}.init(str));

Create init function that returns object itself and initialize parameters with it.

let arr = [5, 15, 25, 30, 35];
console.log(arr); //result [5, 15, 25, 30, 35]
let index = arr.indexOf(30);

if (index > -1) {
   arr.splice(index, 1);
}
console.log(arr); //result [5, 15, 25, 35]

You would probably use

- (BOOL)isKindOfClass:(Class)aClass

This is a method of NSObject.

For more info check the NSObject documentation.

This is how you use this.

BOOL test = [self isKindOfClass:[SomeClass class]];

You might also try doing somthing like this

for(id element in myArray)
{
    NSLog(@"=======================================");
    NSLog(@"Is of type: %@", [element className]);
    NSLog(@"Is of type NSString?: %@", ([[element className] isMemberOfClass:[NSString class]])? @"Yes" : @"No");
    NSLog(@"Is a kind of NSString: %@", ([[element classForCoder] isSubclassOfClass:[NSString class]])? @"Yes" : @"No");    
}

You can try this-

mysql> select @@datadir;

PS- It works on every platform.

There are few ways to create empty Set in Python :

1. Using set() method
   This is the built-in method in python that creates Empty set in that variable.
2. Using clear() method (creative Engineer Technique LOL)
   See this Example:
   
   sets={"Hi","How","are","You","All"}
   type(sets)  (This Line Output : set)
   sets.clear()
   print(sets)  (This Line Output : {})
   type(sets)  (This Line Output : set)
   

So, This are 2 ways to create empty Set.

A small addition to KTC's very informative main answer:

If you are using the free Visual Studio c++ 2010 Express, and managed to get that one to compile 64-bits binaries, and now want to use that to use a 64-bits version of the Boost libaries, you may end up with 32-bits libraries (your mileage may vary of course, but on my machine this is the sad case).

I could fix this using the following: inbetween the steps described above as

1. Start a 32-bit MSVC command prompt and change to the directory where Boost was unzipped.
2. Run: bootstrap

I inserted a call to 'setenv' to set the environment. For a release build, the above steps become:

1. Start a 32-bit MSVC command prompt and change to the directory where Boost was unzipped.
2. Run: "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\setenv.cmd" /Release /x64
3. Run: bootstrap

I found this info here: http://boost.2283326.n4.nabble.com/64-bit-with-VS-Express-again-td3044258.html

Here is the typical structure of new Codeigniter project:

- application/
- system/
- user_guide/
- index.php <- this is the file you need to change

I usually use this code in my CI index.php. Just change local_server_name to the name of your local webserver.

With this code you can deploy your site to your production server without changing index.php each time.

// Domain-based environment
if ($_SERVER['SERVER_NAME'] == 'local_server_name') {
    define('ENVIRONMENT', 'development');
} else {
    define('ENVIRONMENT', 'production');
}

/*
 *---------------------------------------------------------------
 * ERROR REPORTING
 *---------------------------------------------------------------
 *
 * Different environments will require different levels of error reporting.
 * By default development will show errors but testing and live will hide them.
 */

if (defined('ENVIRONMENT')) {
    switch (ENVIRONMENT) {
        case 'development':
            error_reporting(E_ALL);
            break;
        case 'testing':
        case 'production':
            error_reporting(0);
            ini_set('display_errors', 0);  
            break;
        default:
            exit('The application environment is not set correctly.');
    }
}

You could check whether the value of your selectOneMenu component belongs to the list of subjects.

Namely:

public void subjectSelectionChanged() {
    // Cancel if subject is manually written
    if (!subjectList.contains(aktNachricht.subject)) { return; }
    // Write your code here in case the user selected (or wrote) an item of the list
    // ....
}

Supposedly subjectList is a collection type, like ArrayList. Of course here your code will run in case the user writes an item of your selectOneMenu list.

The best solution is to reconfigure the XAMPP Apache server to listen and use different port numbers. Here is how you do it:

1) First, you need to open the Apache “httpd.conf” file and configure it to use/listen on a new port no. To open httpd.conf file, click the “Config” button next to Apache “Start” and “Admin” buttons. In the popup menu that opens, click and open httpd.conf

2) Within the httpd.conf file search for “listen”. You’ll find two rows with something like:

#Listen 12.34.56.78:80
Listen 80

Change the port no to a port no. of your choice (e.g. port 1234) like below

#Listen 12.34.56.78:1234
Listen 1234

3) Next, in the same httpd.conf file look for “ServerName localhost:” Set it to the new port no.

ServerName localhost:1234

4) Save and close the httpd.conf file.

5) Now click the Apache config button again and open the “httpd-ssl.conf” file.

6) In the httpd-ssl.conf file, look for “Listen” again. You may find:

Listen 443

Change it to listen on a new port no of your choice. Say like:

Listen 1443

7) In the same httpd-ssl.conf file find another line that says <VirtualHost _default_:443>. Change this to your new port no. (like 1443)

8) Also in the same httpd-ssl.conf you can find another line defining the port no. For that look for “ServerName”. you might find something like:

ServerName www.example.com:443 or  ServerName localhost:433

Change this ServerName to your new port no.

8) Save and close the httpd-ssl.conf file.

9) Finally, there’s just one more place you should change the port no. For that, click and open the “Config” button of your XAMPP Control Panel. Then click the, “Service and Port Settings” button. Within it, click the “Apache” tab and enter and save the new port nos in the “main port” and “SSL port” boxes. Click save and close the config boxes.

That should do the trick. Now “Start” Apache and if everything goes well, your Apache server should start up.

You will also see the Apache Port/s no in the XAMPP control panel has change to the new port IDs you set.

sprintf() is the PHP function for all sorts of string formatting http://php.net/manual/en/function.sprintf.php

I use this function:

function formatDollars($dollars){
  return '$ '.sprintf('%0.2f', $dollars);
}

I'd definitely go with System.Data.SQLite (as previously mentioned: http://sqlite.phxsoftware.com/)

It is coherent with ADO.NET (System.Data.*), and is compiled into a single DLL. No sqlite3.dll - because the C code of SQLite is embedded within System.Data.SQLite.dll. A bit of managed C++ magic.

Using scale_x_discrete (limits = ...) to specify the order of bars.

positions <- c("Goalkeeper", "Defense", "Striker")
p <- ggplot(theTable, aes(x = Position)) + scale_x_discrete(limits = positions)

@Quickbeam2k1 ,see below -

dataset=pd.read_csv('Data2.csv')
np.set_printoptions(threshold=np.nan)
X = dataset.iloc[:,:].values

Using sklearn

from sklearn.preprocessing import LabelEncoder
labelencoder_X=LabelEncoder()
X[:,0] = labelencoder_X.fit_transform(X[:,0])

I see in your code that you are trying to pass an ARRAY to POST action. In that case follow below working code -

<script src="~/Scripts/jquery-1.10.2.min.js"></script>
<script>
    function submitForm() {
        var roles = ["role1", "role2", "role3"];

        jQuery.ajax({
            type: "POST",
            url: "@Url.Action("AddUser")",
            dataType: "json",
            contentType: "application/json; charset=utf-8",
            data: JSON.stringify(roles),
            success: function (data) { alert(data); },
            failure: function (errMsg) {
                alert(errMsg);
            }
        });
    }
</script>

<input type="button" value="Click" onclick="submitForm()"/>

And the controller action is going to be -

    public ActionResult AddUser(List<String> Roles)
    {
        return null;
    }

Then when you click on the button -

Enqueue means to add an element, dequeue to remove an element.

var stackInput= []; // First stack
var stackOutput= []; // Second stack

// For enqueue, just push the item into the first stack
function enqueue(stackInput, item) {
  return stackInput.push(item);
}

function dequeue(stackInput, stackOutput) {
  // Reverse the stack such that the first element of the output stack is the
  // last element of the input stack. After that, pop the top of the output to
  // get the first element that was ever pushed into the input stack
  if (stackOutput.length <= 0) {
    while(stackInput.length > 0) {
      var elementToOutput = stackInput.pop();
      stackOutput.push(elementToOutput);
    }
  }

  return stackOutput.pop();
}

I just had the same problem on Mac and here's what I did:

1. I removed the android-sdk that I installed with brew
2. I set the ANDROID_HOME variable to be the same as ANDROID_SDK_ROOT=/Users/username/Library/Android/sdk.

Use:

$('#example').dataTable({
    aLengthMenu: [
        [25, 50, 100, 200, -1],
        [25, 50, 100, 200, "All"]
    ],
    iDisplayLength: -1
});

Or if using 1.10+

$('#example').dataTable({
    paging: false
});

The option you should use is iDisplayLength:

$('#adminProducts').dataTable({
  'iDisplayLength': 100
});

$('#table').DataTable({
   "lengthMenu": [ [5, 10, 25, 50, -1], [5, 10, 25, 50, "All"] ]
});

It will Load by default all entries.

$('#example').dataTable({
    aLengthMenu: [
        [25, 50, 100, 200, -1],
        [25, 50, 100, 200, "All"]
    ],
    iDisplayLength: -1
});

Or if using 1.10+

$('#example').dataTable({
    paging: false
});

If you want to load by default 25 not all do this.

$('#example').dataTable({
    aLengthMenu: [
        [25, 50, 100, 200, -1],
        [25, 50, 100, 200, "All"]
    ],
});

Looking at the web I find some simple way to style scrollbars.

This is THE guy! http://almaer.com/blog/creating-custom-scrollbars-with-css-how-css-isnt-great-for-every-task

And here my implementation! https://dl.dropbox.com/u/1471066/cloudBI/cssScrollbars.png

/* Turn on a 13x13 scrollbar */
::-webkit-scrollbar {
    width: 10px;
    height: 13px;
}

::-webkit-scrollbar-button:vertical {
    background-color: silver;
    border: 1px solid gray;
}

/* Turn on single button up on top, and down on bottom */
::-webkit-scrollbar-button:start:decrement,
::-webkit-scrollbar-button:end:increment {
    display: block;
}

/* Turn off the down area up on top, and up area on bottom */
::-webkit-scrollbar-button:vertical:start:increment,
::-webkit-scrollbar-button:vertical:end:decrement {
    display: none;
}

/* Place The scroll down button at the bottom */
::-webkit-scrollbar-button:vertical:increment {
    display: none;
}

/* Place The scroll up button at the up */
::-webkit-scrollbar-button:vertical:decrement {
    display: none;
}

/* Place The scroll down button at the bottom */
::-webkit-scrollbar-button:horizontal:increment {
    display: none;
}

/* Place The scroll up button at the up */
::-webkit-scrollbar-button:horizontal:decrement {
    display: none;
}

::-webkit-scrollbar-track:vertical {
    background-color: blue;
    border: 1px dashed pink;
}

/* Top area above thumb and below up button */
::-webkit-scrollbar-track-piece:vertical:start {
    border: 0px;
}

/* Bottom area below thumb and down button */
::-webkit-scrollbar-track-piece:vertical:end {
    border: 0px;
}

/* Track below and above */
::-webkit-scrollbar-track-piece {
    background-color: silver;
}

/* The thumb itself */
::-webkit-scrollbar-thumb:vertical {
    height: 50px;
    background-color: gray;
}

/* The thumb itself */
::-webkit-scrollbar-thumb:horizontal {
    height: 50px;
    background-color: gray;
}

/* Corner */
::-webkit-scrollbar-corner:vertical {
    background-color: black;
}

/* Resizer */
::-webkit-scrollbar-resizer:vertical {
    background-color: gray;
}

This worked for me

<select ng-init="basicProfile.casteId" ng-model="basicProfile.casteId" class="form-control">
     <option value="0">Select Caste....</option>
     <option data-ng-repeat="option in formCastes" value="{{option.id}}">{{option.casteName}}</option>
 </select>

update YourTable
    set YourColumn = replace(YourColumn, '@domain2', '@domain1')
    where charindex('@domain2', YourColumn) <> 0

Answer for 2018:

The best way to do things like that is to use the Intersection Observer API.

The Intersection Observer API provides a way to asynchronously observe changes in the intersection of a target element with an ancestor element or with a top-level document's viewport.

Historically, detecting visibility of an element, or the relative visibility of two elements in relation to each other, has been a difficult task for which solutions have been unreliable and prone to causing the browser and the sites the user is accessing to become sluggish. Unfortunately, as the web has matured, the need for this kind of information has grown. Intersection information is needed for many reasons, such as:

• Lazy-loading of images or other content as a page is scrolled.
• Implementing "infinite scrolling" web sites, where more and more content is loaded and rendered as you scroll, so that the user doesn't have to flip through pages.
• Reporting of visibility of advertisements in order to calculate ad revenues.
• Deciding whether or not to perform tasks or animation processes based on whether or not the user will see the result.

Implementing intersection detection in the past involved event handlers and loops calling methods like Element.getBoundingClientRect() to build up the needed information for every element affected. Since all this code runs on the main thread, even one of these can cause performance problems. When a site is loaded with these tests, things can get downright ugly.

See the following code example:

var options = {
  root: document.querySelector('#scrollArea'),
  rootMargin: '0px',
  threshold: 1.0
}

var observer = new IntersectionObserver(callback, options);

var target = document.querySelector('#listItem');
observer.observe(target);

Most modern browsers support the IntersectionObserver, but you should use the polyfill for backward-compatibility.

Use compareTo()

Return Values

0 if the argument Date is equal to this Date; a value less than 0 if this Date is before the Date argument; and a value greater than 0 if this Date is after the Date argument.

Like

if(date1.compareTo(date2)>0) 

curl sends POST requests with the default content type of application/x-www-form-urlencoded. If you want to send a JSON request, you will have to specify the correct content type header:

$ curl -vX POST http://server/api/v1/places.json -d @testplace.json \
--header "Content-Type: application/json"

But that will only work if the server accepts json input. The .json at the end of the url may only indicate that the output is json, it doesn't necessarily mean that it also will handle json input. The API documentation should give you a hint on whether it does or not.

The reason you get a 401 and not some other error is probably because the server can't extract the auth_token from your request.

Try this

public static BigInteger factorial(int value){
    if(value < 0){
        throw new IllegalArgumentException("Value must be positive");
    }

    BigInteger result = BigInteger.ONE;
    for (int i = 2; i <= value; i++) {
        result = result.multiply(BigInteger.valueOf(i));
    }

    return result;
}

In our case it was simply a case of giving write rights in github. Initially the user had only read rights and it was giving this error.

I checked on my side by just adding '1.0' and it start working

tex.delete('1.0', END)

you can also try this

You can use the border and box-shadow properties along with CSS pseudo elements to achieve a triple-border sort of effect. See the example below for an idea of how to create three borders at the bottom of a div:

.triple-border:after {_x000D_
    content: " ";_x000D_
    display: block;_x000D_
    width: 100%;_x000D_
    background: #FFE962;_x000D_
    height: 9px;_x000D_
    padding-bottom: 8px;_x000D_
    border-bottom: 9px solid #A3C662;_x000D_
    box-shadow: -2px 11px 0 -1px #34b6af;_x000D_
}

<div class="triple-border">Triple border bottom with multiple colours</div>

You'll have to play around with the values to get the alignment correct. However, you can also achieve more flexibility, e.g. 4 borders if you put some of the attributes in the proper element rather than the pseudo selector.

return ctype_digit($num) && (int) $num > 0

I'm thinking no. Bookmarks/favorites should be under the control of the user, imagine if any site you visited could insert itself into your bookmarks with just some javascript.

I used AndExplorer for this purpose and my solution is popup a dialog and then redirect on the market to install the misssing application:

My startCreation is trying to call external file/directory picker. If it is missing call show installResultMessage function.

private void startCreation(){
    Intent intent = new Intent();
    intent.setAction(Intent.ACTION_PICK);
    Uri startDir = Uri.fromFile(new File("/sdcard"));

    intent.setDataAndType(startDir,
            "vnd.android.cursor.dir/lysesoft.andexplorer.file");
    intent.putExtra("browser_filter_extension_whitelist", "*.csv");
    intent.putExtra("explorer_title", getText(R.string.andex_file_selection_title));
    intent.putExtra("browser_title_background_color",
            getText(R.string.browser_title_background_color));
    intent.putExtra("browser_title_foreground_color",
            getText(R.string.browser_title_foreground_color));
    intent.putExtra("browser_list_background_color",
            getText(R.string.browser_list_background_color));
    intent.putExtra("browser_list_fontscale", "120%");
    intent.putExtra("browser_list_layout", "2");

    try{
         ApplicationInfo info = getPackageManager()
                                 .getApplicationInfo("lysesoft.andexplorer", 0 );

            startActivityForResult(intent, PICK_REQUEST_CODE);
    } catch( PackageManager.NameNotFoundException e ){
        showInstallResultMessage(R.string.error_install_andexplorer);
    } catch (Exception e) {
        Log.w(TAG, e.getMessage());
    }
}

This methos is just pick up a dialog and if user wants install the external application from market

private void showInstallResultMessage(int msg_id) {
    AlertDialog dialog = new AlertDialog.Builder(this).create();
    dialog.setMessage(getText(msg_id));
    dialog.setButton(getText(R.string.button_ok),
            new DialogInterface.OnClickListener() {

                @Override
                public void onClick(DialogInterface dialog, int which) {
                    finish();
                }
            });
    dialog.setButton2(getText(R.string.button_install),
            new DialogInterface.OnClickListener() {

                @Override
                public void onClick(DialogInterface dialog, int which) {
                    Intent intent = new Intent(Intent.ACTION_VIEW);
                    intent.setData(Uri.parse("market://details?id=lysesoft.andexplorer"));
                    startActivity(intent);
                    finish();
                }
            });
    dialog.show();
}

OkHttp Version:3.11.0 or higher

From okhttp source code:

/**
 * Sets the default connect timeout for new connections. A value of 0 means no timeout,
 * otherwise values must be between 1 and {@link Integer#MAX_VALUE} when converted to
 * milliseconds.
 *
 * <p>The connectTimeout is applied when connecting a TCP socket to the target host.
 * The default value is 10 seconds.
 */
public Builder connectTimeout(long timeout, TimeUnit unit) {
    connectTimeout = checkDuration("timeout", timeout, unit);
    return this;
}

unit can be any value of below

TimeUnit.NANOSECONDS
TimeUnit.MICROSECONDS
TimeUnit.MILLISECONDS
TimeUnit.SECONDS
TimeUnit.MINUTES
TimeUnit.HOURS
TimeUnit.DAYS

example code

OkHttpClient client = new OkHttpClient.Builder()
    .connectTimeout(5000, TimeUnit.MILLISECONDS)/*timeout: 5 seconds*/
    .build();

String url = "https://www.google.com";
Request request = new Request.Builder()
    .url(url)
    .build();

try {
    Response response = client.newCall(request).execute();
} catch (IOException e) {
    e.printStackTrace();
}

Updated

I have add new API to OkHttp from version 3.12.0, you can set timeout like this:

OkHttpClient client = new OkHttpClient.Builder()
    .connectTimeout(Duration.ofSeconds(5)) // timeout: 5 seconds
    .build();

NOTE: This requires API 26+ so if you support older versions of Android, continue to use (5, TimeUnit.SECONDS).

you may have multiple separators, including whitespace characters, commas, semicolons, etc. take those in repeatable group with []+, like:

 String[] tokens = "a , b,  ,c; ;d,      ".split( "[,; \t\n\r]+" );

you'll have 4 tokens -- a, b, c, d

leading separators in the source string need to be removed before applying this split.

as answer to question asked:

String data = "5|6|7||8|9||";
String[] split = data.split("[\\| \t\n\r]+");

whitespaces added just in case if you'll have those as separators along with |

If you are still looking for further more customization,

Check out the following library: https://lokesh-coder.github.io/pretty-checkbox/

Thanks

Use a library to handle phone number. Libphonenumber by Google is your best bet.

// Require `PhoneNumberFormat`.
var PNF = require('google-libphonenumber').PhoneNumberFormat;

// Get an instance of `PhoneNumberUtil`.
var phoneUtil = require('google-libphonenumber').PhoneNumberUtil.getInstance();

// Parse number with country code.
var phoneNumber = phoneUtil.parse('202-456-1414', 'US');

// Print number in the international format.
console.log(phoneUtil.format(phoneNumber, PNF.INTERNATIONAL));
// => +1 202-456-1414

I recommend to use this package by seegno.

Several options are available:

Call QueryDosDevice with a NULL lpDeviceName to list all DOS devices. Then use CreateFile and GetCommConfig with each device name in turn to figure out whether it's a serial port.

Call SetupDiGetClassDevs with a ClassGuid of GUID_DEVINTERFACE_COMPORT.

WMI is also available to C/C++ programs.

There's some conversation on the win32 newsgroup and a CodeProject, er, project.

In addition to @Dan Herbert's answer , You we should encode just the values generally.

Split has params parameter Split('&','='); expression firstly split by & then '=' so odd elements are all values to be encoded shown below.

public static void EncodeQueryString(ref string queryString)
{
    var array=queryString.Split('&','=');
    for (int i = 0; i < array.Length; i++) {
        string part=array[i];
        if(i%2==1)
        {               
            part=System.Web.HttpUtility.UrlEncode(array[i]);
            queryString=queryString.Replace(array[i],part);
        }
    }
}

You can use pgrep as long as you include the -f options. That makes pgrep match keywords in the whole command (including arguments) instead of just the process name.

pgrep -f keyword

From the man page:

-f       The pattern is normally only matched against the process name. When -f is set, the full command line is used.

If you really want to avoid pgrep, try:

ps -ef | awk '/[k]eyword/{print $2}'

Note the [] around the first letter of the keyword. That's a useful trick to avoid matching the awk command itself.

The OP added the following answer themselves, with the commentary:

With help from the answers and the comments, after some testing, I came up with this:

function contains() {
    local n=$#
    local value=${!n}
    for ((i=1;i < $#;i++)) {
        if [ "${!i}" == "${value}" ]; then
            echo "y"
            return 0
        fi
    }
    echo "n"
    return 1
}

A=("one" "two" "three four")
if [ $(contains "${A[@]}" "one") == "y" ]; then
    echo "contains one"
fi
if [ $(contains "${A[@]}" "three") == "y" ]; then
    echo "contains three"
fi

For two digit minutes use: new Date().toLocaleFormat("%M")

In addition to the RFC Spec you can also see this in action. Check out the twitter responses.

https://developer.twitter.com/en/docs/ads/general/guides/response-codes

you can accomplish your task simply by implementing as below:

private Menu menu;

 @Override
 public boolean onCreateOptionsMenu(Menu menu) {
    getMenuInflater().inflate(R.menu.drive_menu, menu);
    return true;
}

@Override
public boolean onPrepareOptionsMenu(Menu menu) {
    this.menu = menu;
    return super.onPrepareOptionsMenu(menu);
}

@Override
public boolean onOptionsItemSelected(MenuItem item) {
    int id = item.getItemId();

    if (id == R.id.action_toggle_grid) {
        handleMenuOption(id);
        return true;

    } else if(id == R.id.action_toggle_list){
        handleMenuOption(id);
        return true;
    }

    return super.onOptionsItemSelected(item);
}

private void handleMenuOption(int id) {
    MenuItem item = menu.findItem(id);
    if (id == R.id.action_toggle_grid){
        item.setVisible(false);
        menu.findItem(R.id.action_toggle_list).setVisible(true);
    }else if (id == R.id.action_toggle_list){
        item.setVisible(false);
        menu.findItem(R.id.action_toggle_grid).setVisible(true);
    }
}

If you use Microsoft.ApplicationBlocks.Data it'll make calling your sprocs a single line

SqlHelper.ExecuteNonQuery(ConnectionString, "SprocName", DOB)

Oh and I think casperOne is correct...if you want to ensure the correct datetime over multiple timezones then simply convert the value to UTC before you send the value to SQL Server

SqlHelper.ExecuteNonQuery(ConnectionString, "SprocName", DOB.ToUniversalTime())

1. Allocation always depends on your OS. If you allocate too much memory, you could end up having loaded portions into swap, which indeed is slow.
2. Whether your program runs slower or faster depends on the references the VM has to handle and to clean. The GC doesn't have to sweep through the allocated memory to find abandoned objects. It knows it's objects and the amount of memory they allocate by reference mapping. So sweeping just depends on the size of your objects. If your program behaves the same in both cases, the only performance impact should be on VM startup, when the VM tries to allocate memory provided by your OS and if you use the swap (which again leads to 1.)

Note: this was an experiment to see how UTF-8 encoding worked internally. The solution offered by vilicvane, to use a UTF8Encoding object that is initialised to throw an exception on decoding failure, is much simpler, and basically does the same thing.

I wrote this piece of code to differentiate between UTF-8 and Windows-1252. It shouldn't be used for gigantic text files though, since it loads the entire thing into memory and scans it completely. I used it for .srt subtitle files, just to be able to save them back in the encoding in which they were loaded.

The encoding given to the function as ref should be the 8-bit fallback encoding to use in case the file is detected as not being valid UTF-8; generally, on Windows systems, this will be Windows-1252. This doesn't do anything fancy like checking actual valid ascii ranges though, and doesn't detect UTF-16 even on byte order mark.

The theory behind the bitwise detection can be found here: https://ianthehenry.com/2015/1/17/decoding-utf-8/

Basically, the bit range of the first byte determines how many after it are part of the UTF-8 entity. These bytes after it are always in the same bit range.

/// <summary>
/// Reads a text file, and detects whether its encoding is valid UTF-8 or ascii.
/// If not, decodes the text using the given fallback encoding.
/// Bit-wise mechanism for detecting valid UTF-8 based on
/// https://ianthehenry.com/2015/1/17/decoding-utf-8/
/// </summary>
/// <param name="docBytes">The bytes read from the file.</param>
/// <param name="encoding">The default encoding to use as fallback if the text is detected not to be pure ascii or UTF-8 compliant. This ref parameter is changed to the detected encoding.</param>
/// <returns>The contents of the read file, as String.</returns>
public static String ReadFileAndGetEncoding(Byte[] docBytes, ref Encoding encoding)
{
    if (encoding == null)
        encoding = Encoding.GetEncoding(1252);
    Int32 len = docBytes.Length;
    // byte order mark for utf-8. Easiest way of detecting encoding.
    if (len > 3 && docBytes[0] == 0xEF && docBytes[1] == 0xBB && docBytes[2] == 0xBF)
    {
        encoding = new UTF8Encoding(true);
        // Note that even when initialising an encoding to have
        // a BOM, it does not cut it off the front of the input.
        return encoding.GetString(docBytes, 3, len - 3);
    }
    Boolean isPureAscii = true;
    Boolean isUtf8Valid = true;
    for (Int32 i = 0; i < len; ++i)
    {
        Int32 skip = TestUtf8(docBytes, i);
        if (skip == 0)
            continue;
        if (isPureAscii)
            isPureAscii = false;
        if (skip < 0)
        {
            isUtf8Valid = false;
            // if invalid utf8 is detected, there's no sense in going on.
            break;
        }
        i += skip;
    }
    if (isPureAscii)
        encoding = new ASCIIEncoding(); // pure 7-bit ascii.
    else if (isUtf8Valid)
        encoding = new UTF8Encoding(false);
    // else, retain given encoding. This should be an 8-bit encoding like Windows-1252.
    return encoding.GetString(docBytes);
}

/// <summary>
/// Tests if the bytes following the given offset are UTF-8 valid, and
/// returns the amount of bytes to skip ahead to do the next read if it is.
/// If the text is not UTF-8 valid it returns -1.
/// </summary>
/// <param name="binFile">Byte array to test</param>
/// <param name="offset">Offset in the byte array to test.</param>
/// <returns>The amount of bytes to skip ahead for the next read, or -1 if the byte sequence wasn't valid UTF-8</returns>
public static Int32 TestUtf8(Byte[] binFile, Int32 offset)
{
    // 7 bytes (so 6 added bytes) is the maximum the UTF-8 design could support,
    // but in reality it only goes up to 3, meaning the full amount is 4.
    const Int32 maxUtf8Length = 4;
    Byte current = binFile[offset];
    if ((current & 0x80) == 0)
        return 0; // valid 7-bit ascii. Added length is 0 bytes.
    Int32 len = binFile.Length;
    for (Int32 addedlength = 1; addedlength < maxUtf8Length; ++addedlength)
    {
        Int32 fullmask = 0x80;
        Int32 testmask = 0;
        // This code adds shifted bits to get the desired full mask.
        // If the full mask is [111]0 0000, then test mask will be [110]0 0000. Since this is
        // effectively always the previous step in the iteration I just store it each time.
        for (Int32 i = 0; i <= addedlength; ++i)
        {
            testmask = fullmask;
            fullmask += (0x80 >> (i+1));
        }
        // figure out bit masks from level
        if ((current & fullmask) == testmask)
        {
            if (offset + addedlength >= len)
                return -1;
            // Lookahead. Pattern of any following bytes is always 10xxxxxx
            for (Int32 i = 1; i <= addedlength; ++i)
            {
                if ((binFile[offset + i] & 0xC0) != 0x80)
                    return -1;
            }
            return addedlength;
        }
    }
    // Value is greater than the maximum allowed for utf8. Deemed invalid.
    return -1;
}

image has a shape of (64,64,3).

Your input placeholder _x have a shape of (?, 64,64,3).

The problem is that you're feeding the placeholder with a value of a different shape.

You have to feed it with a value of (1, 64, 64, 3) = a batch of 1 image.

Just reshape your image value to a batch with size one.

image = array(img).reshape(1, 64,64,3)

P.S: the fact that the input placeholder accepts a batch of images, means that you can run predicions for a batch of images in parallel. You can try to read more than 1 image (N images) and than build a batch of N image, using a tensor with shape (N, 64,64,3)

Apply this if you use laravel.

Laravel has a not_regex where field under validation must not match the given regular expression; uses the PHP preg_match function internally.

'email' => 'not_regex:/^.+$/i'

Assume that you have a tr row with multiple checkboxes in it, and you want to count only if the first checkbox is checked.

You can do that by giving a class to the first checkbox

For example class='mycxk' and you can count that using the filter, like this

$('.mycxk').filter(':checked').length

Not completely entirely a direct answer to the original question, but relevant for the curious quickly trying to visually understand their cookie information storage planning without implementing a complex limiter algorithm, this string is 4096 ASCII character bytes:

"abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmn"

I had this problem before and to fix this, Just make sure :

1. You did not create an instance of this class before
2. If you call this from a class method, make sure the __destruct is set on the class you called from.

My problem (before) :
I had class : Core, Router, Permissions and Render Core include's the Router class, Router then calls Permissions class, then Router __destruct calls the Render class and the error "Cannot declare class because the name is already in use" appeared.

Solution :
I added __destruct on Permission class and the __destruct was empty and it's fixed...

...
XmlSerializer s = new XmlSerializer(objectToSerialize.GetType());
XmlSerializerNamespaces ns = new XmlSerializerNamespaces();
ns.Add("","");
s.Serialize(xmlWriter, objectToSerialize, ns);

You could search for:

<li><a href="#">[^\n]+

And replace with:

$0</a>

Where $0 is the whole match. The exact semantics will depend on the language are you using though.

WARNING: You should avoid parsing HTML with regex. Here's why.

See question: How to find an item in a std::vector?

You'll also need to ensure you've implemented a suitable operator==() for your object, if the default one isn't sufficient for a "deep" equality test.

Simple method using System.Data.DataSetExtensions:

table.AsEnumerable().Select(row => new TankReading{
        TankReadingsID = Convert.ToInt32(row["TRReadingsID"]),
        TankID = Convert.ToInt32(row["TankID"]),
        ReadingDateTime = Convert.ToDateTime(row["ReadingDateTime"]),
        ReadingFeet = Convert.ToInt32(row["ReadingFeet"]),
        ReadingInches = Convert.ToInt32(row["ReadingInches"]),
        MaterialNumber = row["MaterialNumber"].ToString(),
        EnteredBy = row["EnteredBy"].ToString(),
        ReadingPounds = Convert.ToDecimal(row["ReadingPounds"]),
        MaterialID = Convert.ToInt32(row["MaterialID"]),
        Submitted = Convert.ToBoolean(row["Submitted"]),
    });

Or:

TankReading TankReadingFromDataRow(DataRow row){
    return new TankReading{
        TankReadingsID = Convert.ToInt32(row["TRReadingsID"]),
        TankID = Convert.ToInt32(row["TankID"]),
        ReadingDateTime = Convert.ToDateTime(row["ReadingDateTime"]),
        ReadingFeet = Convert.ToInt32(row["ReadingFeet"]),
        ReadingInches = Convert.ToInt32(row["ReadingInches"]),
        MaterialNumber = row["MaterialNumber"].ToString(),
        EnteredBy = row["EnteredBy"].ToString(),
        ReadingPounds = Convert.ToDecimal(row["ReadingPounds"]),
        MaterialID = Convert.ToInt32(row["MaterialID"]),
        Submitted = Convert.ToBoolean(row["Submitted"]),
    };
}

// Now you can do this
table.AsEnumerable().Select(row => return TankReadingFromDataRow(row));

Or, better yet, create a TankReading(DataRow r) constructor, then this becomes:

    table.AsEnumerable().Select(row => return new TankReading(row));

In addition to the answer given by @l0b0 I just had the situation where I needed to both keep any trailing newlines output by the script and check the script's return code. And the problem with l0b0's answer is that the 'echo x' was resetting $? back to zero... so I managed to come up with this very cunning solution:

RESULTX="$(./myscript; echo x$?)"
RETURNCODE=${RESULTX##*x}
RESULT="${RESULTX%x*}"

It would not be wrong, if we say that redis is combination of (cache + data structure) while memcached is just a cache.

As others have said, you can add multiple classes to an element.

But that's not really the point. I get your question about inheritance. The real point is that inheritance in CSS is done not through classes, but through element hierarchies. So to model inherited traits you need to apply them to different levels of elements in the DOM.

For only one line, you need

...
<View android:id="@+id/primerdivisor"
android:layout_height="2dp"
android:layout_width="fill_parent"
android:background="#ffffff" /> 
...

The World Wide Web Consortium (W3C) actually defined a comment interface. The definition says all the characters between the starting ' <!--' and ending '-->' form a part of comment content and no lexical check is done on the content of a comment.

More details are available on developer.android.com site.

So you can simply add your comment in between any starting and ending tag. In Eclipse IDE simply typing <!-- would auto complete the comment for you. You can then add your comment text in between.

For example:

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent"
    android:orientation="vertical"
    tools:context=".TicTacToe" >

 <!-- This is a comment -->

</LinearLayout>

Purpose of specifically mentioning in between is because you cannot use it inside a tag.

For example:

<TextView 
    android:text="@string/game_title"
    <!-- This is a comment -->
    android:layout_height="wrap_content"
    android:layout_width="fill_parent"/>

is wrong and will give following error

 Element type "TextView" must be followed by either attribute specifications, ">" or "/>".

For me it worked like I had images in icons folder under src and I wrote below code.

new ImageIcon(getClass().getResource("/icons/rsz_measurment_01.png"));

You can only use await in an async method, and Main cannot be async.

You'll have to use your own async-compatible context, call Wait on the returned Task in the Main method, or just ignore the returned Task and just block on the call to Read. Note that Wait will wrap any exceptions in an AggregateException.

If you want a good intro, see my async/await intro post.

First, you should download the suitable version for your system from here: https://pecl.php.net/package/mcrypt/1.0.3/windows

Then, you should copy php_mcrypt.dll to ../xampp/php/ext/ and enable the extension by adding extension=mcrypt to your xampp/php/php.ini file.

extension String{
// to make text field mandatory * looks
mutating func markAsMandatoryField()-> NSAttributedString{

    let main_string = self
    let string_to_color = "*"
    let range = (main_string as NSString).range(of: string_to_color)
    print("The rang = \(range)")
    let attribute = NSMutableAttributedString.init(string: main_string)
    attribute.addAttribute(NSAttributedString.Key.foregroundColor, value: UIColor.rgbColor(red: 255.0, green: 0.0, blue: 23.0) , range: range)
     return attribute
}

}

use EmailLbl.attributedText = EmailLbl.text!.markAsMandatoryField()

If both methods have same parameter types, but different return type than it is not possible. From Java Language Specification, Java SE 8 Edition, §8.4.2. Method Signature:

Two methods or constructors, M and N, have the same signature if they have the same name, the same type parameters (if any) (§8.4.4), and, after adapting the formal parameter types of N to the the type parameters of M, the same formal parameter types.

If both methods has different parameter types (so, they have different signature), then it is possible. It is called overloading.

Use header to modify the HTTP header:

header('Content-Type: text/html; charset=utf-8');

Note to call this function before any output has been sent to the client. Otherwise the header has been sent too and you obviously can’t change it any more. You can check that with headers_sent. See the manual page of header for more information.

A possible solution that worked for my case. It turns milliseconds into hh:ss time:

function millisecondstotime(ms) {
var x = new Date(ms);
var y = x.getHours();
if (y < 10) {
y = '0' + y;
} 
var z = x.getMinutes();
if (z < 10) {
    z = '0' + z;
} 
return y + ':' + z;
}

Yii 1

Yii::app()->request->url

For Yii2:

Yii::$app->request->url

To see the devices I was interested in, I had replace Win32_USBHub by Win32_PnPEntity in Adel Hazzah's code, based on this post. This works for me:

namespace ConsoleApplication1
{
  using System;
  using System.Collections.Generic;
  using System.Management; // need to add System.Management to your project references.

  class Program
  {
    static void Main(string[] args)
    {
      var usbDevices = GetUSBDevices();

      foreach (var usbDevice in usbDevices)
      {
        Console.WriteLine("Device ID: {0}, PNP Device ID: {1}, Description: {2}",
            usbDevice.DeviceID, usbDevice.PnpDeviceID, usbDevice.Description);
      }

      Console.Read();
    }

    static List<USBDeviceInfo> GetUSBDevices()
    {
      List<USBDeviceInfo> devices = new List<USBDeviceInfo>();

      ManagementObjectCollection collection;
      using (var searcher = new ManagementObjectSearcher(@"Select * From Win32_PnPEntity"))
        collection = searcher.Get();      

      foreach (var device in collection)
      {
        devices.Add(new USBDeviceInfo(
        (string)device.GetPropertyValue("DeviceID"),
        (string)device.GetPropertyValue("PNPDeviceID"),
        (string)device.GetPropertyValue("Description")
        ));
      }

      collection.Dispose();
      return devices;
    }
  }

  class USBDeviceInfo
  {
    public USBDeviceInfo(string deviceID, string pnpDeviceID, string description)
    {
      this.DeviceID = deviceID;
      this.PnpDeviceID = pnpDeviceID;
      this.Description = description;
    }
    public string DeviceID { get; private set; }
    public string PnpDeviceID { get; private set; }
    public string Description { get; private set; }
  }
}

CURL client supports FTP protocol and works for passive mode. Get Download WITHOUT SSL version and you don't need any openssl.dll libraries. Just one curl.exe command line application.
http://www.paehl.com/open_source/?CURL_7.35.0

curl.exe -T c:\test\myfile.dat ftp://ftp.server.com/some/folder/myfile.dat --user myuser:mypwd

Another one is Putty psftp.exe but server key verification prompt requires a trick. This command line inputs NO for prompt meaning key is not stored in registry just this time being used. You need an external script file but sometimes its good if you copy multiple files up and down.
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

echo n | psftp.exe ftp.server.com -l myuser -pw mypwd -b script.txt

script.txt (any ftp command may be typed)

put "C:\test\myfile.dat" "/some/folder/myfile.dat"
quit

My favorite...

SELECT objParent.name AS parent, obj.name, col.*
FROM sysobjects obj 
    LEFT JOIN syscolumns col
        ON obj.id = col.id
    LEFT JOIN sysobjects objParent
        ON objParent.id = obj.parent_obj
WHERE col.name LIKE '%Comment%'
   OR obj.name LIKE '%Comment%'

Above I'm searching for "Comment".

Drop the percent signs if you want a direct match.

This searches tables, fields and things like primary key names, constraints, views, etc.

And when you want to search in StoredProcs after monkeying with the tables (and need to make the procs match), use the following...

SELECT name
FROM sys.procedures
WHERE OBJECT_DEFINITION(OBJECT_ID) LIKE '%Comment%'

Hope that helps, I find these two queries to be extremely useful.

After trying so hard with bind, unbind, on, off, click, attr, removeAttr, prop I made it work. So, I have the following scenario: In my html i have NOT attached any inline onclick handlers.

Then in my Javascript i used the following to add an inline onclick handler:

$(element).attr('onclick','myFunction()');

To remove this at a later point from Javascript I used the following:

$(element).prop('onclick',null);

This is the way it worked for me to bind and unbind click events dinamically in Javascript. Remember NOT to insert any inline onclick handler in your elements.

Is there a reason why you can't use the Excel ODBC connection to read and write to Excel? For example, I've used the following code to read from an Excel file row by row like a database:

private DataTable LoadExcelData(string fileName)
{
  string Connection = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + fileName + ";Extended Properties=\"Excel 12.0;HDR=Yes;IMEX=1\";";

  OleDbConnection con = new OleDbConnection(Connection);

  OleDbCommand command = new OleDbCommand();

  DataTable dt = new DataTable(); OleDbDataAdapter myCommand = new OleDbDataAdapter("select * from [Sheet1$] WHERE LastName <> '' ORDER BY LastName, FirstName", con);

  myCommand.Fill(dt);

  Console.WriteLine(dt.Rows.Count);

  return dt;
}

You can write to the Excel "database" the same way. As you can see, you can select the version number to use so that you can downgrade Excel versions for the machine with Excel 2003. Actually, the same is true for using the Interop. You can use the lower version and it should work with Excel 2003 even though you only have the higher version on your development PC.

The best idea to encrypt/decrypt your data in the database even if you have access to the code is to use 2 different passes a private password (user-pass) for each user and a private code for all users (system-pass).

Scenario

1. user-pass is stored with md5 in the database and is being used to validate each user to login to the system. This user-pass is different for each user.
2. Each user entry in the database has in md5 a system-pass for the encryption/decryption of the data. This system-pass is the same for each user.
3. Any time a user is being removed from the system all data that are encrypted under the old system-pass have to be encrypted again under a new system-pass to avoid security issues.

I have found something strange here about word-wrap only works with width property of CSS properly.

#ONLYwidth {_x000D_
  width: 200px;_x000D_
}_x000D_
_x000D_
#wordwrapWITHOUTWidth {_x000D_
  word-wrap: break-word;_x000D_
}_x000D_
_x000D_
#wordwrapWITHWidth {_x000D_
  width: 200px;_x000D_
  word-wrap: break-word;_x000D_
}

<b>This is the example of word-wrap only using width property</b>_x000D_
<p id="ONLYwidth">827938828ey823876te37257e5t328er6367r5erd663275e65r532r6s3624e5645376er563rdr753624e544341763r567r4e56r326r5632r65sr32dr32udr56r634r57rd63725</p>_x000D_
<br/>_x000D_
<b>This is the example of word-wrap without width property</b>_x000D_
<p id="wordwrapWITHOUTWidth">827938828ey823876te37257e5t328er6367r5erd663275e65r532r6s3624e5645376er563rdr753624e544341763r567r4e56r326r5632r65sr32dr32udr56r634r57rd63725</p>_x000D_
<br/>_x000D_
<b>This is the example of word-wrap with width property</b>_x000D_
<p id="wordwrapWITHWidth">827938828ey823876te37257e5t328er6367r5erd663275e65r532r6s3624e5645376er563rdr753624e544341763r567r4e56r326r5632r65sr32dr32udr56r634r57rd63725</p>

Here is a working demo that I have prepared about it. http://jsfiddle.net/Hss5g/2/

Such lookups are implemented in django.views.generic.date_based as follows:

{'date_time_field__range': (datetime.datetime.combine(date, datetime.time.min),
                            datetime.datetime.combine(date, datetime.time.max))} 

Because it is quite verbose there are plans to improve the syntax using __date operator. Check "#9596 Comparing a DateTimeField to a date is too hard" for more details.

If you're using @ConfigurationProperties with Spring Boot 2 to inject maps with keys that contain colons then you need an additional level of escaping using square brackets inside the quotes because spring only allows alphanumeric and '-' characters, stripping out the rest. Your new key would look like this:

"[8.11.32.120:8000]": GoogleMapsKeyforThisDomain

See this github issue for reference.

The resources you put in src/main/resources will be copied during the build process to target/classes which can be accessed using:

...this.getClass().getResourceAsStream("/config.txt");

Have you tried using the concat() function?

ON tableTwo.query = concat('category_id=',tableOne.category_id)

Based on @mat-khor's answer, I took the syswin su.exe, saved it as manufacture-syswin-su.exe, and wrote this wrapper script. It handles redirection of the command's stdout and stderr, so it can be used in a pipe, etc. Also, the script exits with the status of the given command.

Limitations:

• The syswin-su options are currently hardcoded to use the current user. Prepending env USERNAME=... to the script invocation overrides it. If other options were needed, the script would have to distinguish between syswin-su and command arguments, e.g. splitting at the first --.
• If the UAC prompt is cancelled or declined, the script hangs.

.

#!/bin/bash
set -e

# join command $@ into a single string with quoting (required for syswin-su)
cmd=$( ( set -x; set -- "$@"; ) 2>&1 | perl -nle 'print $1 if /\bset -- (.*)/' )

tmpDir=$(mktemp -t -d -- "$(basename "$0")_$(date '+%Y%m%dT%H%M%S')_XXX")
mkfifo -- "$tmpDir/out"
mkfifo -- "$tmpDir/err"

cat >> "$tmpDir/script" <<-SCRIPT
    #!/bin/env bash
    $cmd > '$tmpDir/out' 2> '$tmpDir/err'
    echo \$? > '$tmpDir/status'
SCRIPT

chmod 700 -- "$tmpDir/script"

manufacture-syswin-su -s bash -u "$USERNAME" -m -c "cygstart --showminimized bash -c '$tmpDir/script'" > /dev/null &
cat -- "$tmpDir/err" >&2 &
cat -- "$tmpDir/out"
wait $!
exit $(<"$tmpDir/status")

This should work for you:

let example = $('#example').DataTable({
    columnDefs: [{
        orderable: false,
        className: 'select-checkbox',
        targets: 0
    }],
    select: {
        style: 'os',
        selector: 'td:first-child'
    },
    order: [
        [1, 'asc']
    ]
});
example.on("click", "th.select-checkbox", function() {
    if ($("th.select-checkbox").hasClass("selected")) {
        example.rows().deselect();
        $("th.select-checkbox").removeClass("selected");
    } else {
        example.rows().select();
        $("th.select-checkbox").addClass("selected");
    }
}).on("select deselect", function() {
    ("Some selection or deselection going on")
    if (example.rows({
            selected: true
        }).count() !== example.rows().count()) {
        $("th.select-checkbox").removeClass("selected");
    } else {
        $("th.select-checkbox").addClass("selected");
    }
});

I've added to the CSS though:

table.dataTable tr th.select-checkbox.selected::after {
    content: "?";
    margin-top: -11px;
    margin-left: -4px;
    text-align: center;
    text-shadow: rgb(176, 190, 217) 1px 1px, rgb(176, 190, 217) -1px -1px, rgb(176, 190, 217) 1px -1px, rgb(176, 190, 217) -1px 1px;
}

Working JSFiddle, hope that helps.

Display line numbers:

:set nu

Stop showing the line numbers:

:set nonu

Its short for :set nonumber

ps. These commands are to be run in normal mode.

Just use the following method, pass it lat and long and get distance in meter:

private static double distance_in_meter(final double lat1, final double lon1, final double lat2, final double lon2) {
    double R = 6371000f; // Radius of the earth in m
    double dLat = (lat1 - lat2) * Math.PI / 180f;
    double dLon = (lon1 - lon2) * Math.PI / 180f;
    double a = Math.sin(dLat/2) * Math.sin(dLat/2) +
            Math.cos(latlong1.latitude * Math.PI / 180f) * Math.cos(latlong2.latitude * Math.PI / 180f) *
                    Math.sin(dLon/2) * Math.sin(dLon/2);
    double c = 2f * Math.atan2(Math.sqrt(a), Math.sqrt(1-a));
    double d = R * c;
    return d;
}

1. Using header, a built-in PHP function

a) Simple redirect without parameters

<?php
   header('Location: index.php');
?>

b) Redirect with GET parameters

<?php
      $id = 2;
      header("Location: index.php?id=$id&msg=succesfully redirect");
  ?>

2. Redirect with JavaScript in PHP

a) Simple redirect without parameters

<?php
     echo "<script>location.href='index.php';</script>";
 ?>

b) Redirect with GET parameters

<?php
     $id = 2;
     echo "<script>location.href='index.php?id=$id&msg=succesfully redirect';</script>";
   ?>

Here is an example:

this.configs = new Map<string, string>();
this.configs.set("key", "value");

Demo

Error 1064 often occurs when missing DELIMITER around statement like : create function, create trigger.. Make sure to add DELIMITER $$ before each statement and end it with $$ DELIMITER like this:

DELIMITER $$
CREATE TRIGGER `agents_before_ins_tr` BEFORE INSERT ON `agents`
  FOR EACH ROW
BEGIN

END $$
DELIMITER ; 

Right click on the folder you want to download in, and open up tortoise-svn -> repo-browser.

Enter in the URL above in the next window.

right click on the trunk folder and choose either checkout (if you want to update from SVN later) or export (if you just want your own copy of that revision).

You should have a look on the -regextype argument of find, see manpage:

      -regextype type
          Changes the regular expression syntax understood by -regex and -iregex 
          tests which occur later on the command line.  Currently-implemented  
          types  are  emacs (this is the default), posix-awk, posix-basic, 
          posix-egrep and posix-extended. 

I guess the emacs type doesn't support the [[:digit:]] construct. I tried it with posix-extended and it worked as expected:

find -regextype posix-extended -regex '.*[1234567890]'
find -regextype posix-extended -regex '.*[[:digit:]]'

The only good way I found was to use Javascript to move a tooltip <div> around. Obviously this only works if you have SVG inside an HTML document - not standalone. And it requires Javascript.

function showTooltip(evt, text) {_x000D_
  let tooltip = document.getElementById("tooltip");_x000D_
  tooltip.innerHTML = text;_x000D_
  tooltip.style.display = "block";_x000D_
  tooltip.style.left = evt.pageX + 10 + 'px';_x000D_
  tooltip.style.top = evt.pageY + 10 + 'px';_x000D_
}_x000D_
_x000D_
function hideTooltip() {_x000D_
  var tooltip = document.getElementById("tooltip");_x000D_
  tooltip.style.display = "none";_x000D_
}

#tooltip {_x000D_
  background: cornsilk;_x000D_
  border: 1px solid black;_x000D_
  border-radius: 5px;_x000D_
  padding: 5px;_x000D_
}

<div id="tooltip" display="none" style="position: absolute; display: none;"></div>_x000D_
_x000D_
<svg>_x000D_
  <rect width="100" height="50" style="fill: blue;" onmousemove="showTooltip(evt, 'This is blue');" onmouseout="hideTooltip();" >_x000D_
  </rect>_x000D_
</svg>

According the to Windows Dev Center WIN32_LEAN_AND_MEAN excludes APIs such as Cryptography, DDE, RPC, Shell, and Windows Sockets.

function uploadfile(ctrl) {
    var validate = validateimg(ctrl);

    if (validate) {
        if (window.FormData !== undefined) {
            ShowLoading();
            var fileUpload = $(ctrl).get(0);
            var files = fileUpload.files;


            var fileData = new FormData();


            for (var i = 0; i < files.length; i++) {
                fileData.append(files[i].name, files[i]);
            }


            fileData.append('username', 'Wishes');

            $.ajax({
                url: 'UploadWishesFiles',
                type: "POST",
                contentType: false,
                processData: false,
                data: fileData,
                success: function(result) {
                    var id = $(ctrl).attr('id');
                    $('#' + id.replace('txt', 'hdn')).val(result);

                    $('#imgPictureEn').attr('src', '../Data/Wishes/' + result).show();

                    HideLoading();
                },
                error: function(err) {
                    alert(err.statusText);
                    HideLoading();
                }
            });
        } else {
            alert("FormData is not supported.");
        }

    }

yes you can use MapView in v2... for further details you can get help from this

https://gist.github.com/joshdholtz/4522551

SomeFragment.java

public class SomeFragment extends Fragment implements OnMapReadyCallback{
 
    MapView mapView;
    GoogleMap map;
 
    @Override
    public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {
        View v = inflater.inflate(R.layout.some_layout, container, false);
 
        // Gets the MapView from the XML layout and creates it
        mapView = (MapView) v.findViewById(R.id.mapview);
        mapView.onCreate(savedInstanceState);
 
    
        mapView.getMapAsync(this);
        
 
        return v;
    }
 
   @Override
   public void onMapReady(GoogleMap googleMap) {
       map = googleMap;
       map.getUiSettings().setMyLocationButtonEnabled(false);
       map.setMyLocationEnabled(true);
       /*
       //in old Api Needs to call MapsInitializer before doing any CameraUpdateFactory call
        try {
            MapsInitializer.initialize(this.getActivity());
        } catch (GooglePlayServicesNotAvailableException e) {
            e.printStackTrace();
        } 
       */
        
        // Updates the location and zoom of the MapView
        /*CameraUpdate cameraUpdate = CameraUpdateFactory.newLatLngZoom(new LatLng(43.1, -87.9), 10);
        map.animateCamera(cameraUpdate);*/
        map.moveCamera(CameraUpdateFactory.newLatLng(new LatLng(43.1, -87.9)));

    }

    @Override
    public void onResume() {
        mapView.onResume();
        super.onResume();
    }


    @Override
    public void onPause() {
        super.onPause();
        mapView.onPause();
    }
 
    @Override
    public void onDestroy() {
        super.onDestroy();
        mapView.onDestroy();
    }
 
    @Override
    public void onLowMemory() {
        super.onLowMemory();
        mapView.onLowMemory();
    }
 
}

AndroidManifest.xml

<manifest xmlns:android="http://schemas.android.com/apk/res/android"
    package="com.example"
    android:versionCode="1"
    android:versionName="1.0" >
    
    <uses-sdk
        android:minSdkVersion="8"
        android:targetSdkVersion="15" />
    
    <uses-permission android:name="android.permission.INTERNET"/>
    <uses-permission android:name="com.google.android.providers.gsf.permission.READ_GSERVICES"/>
    <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"/>
    <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/>
    
    <uses-feature
        android:glEsVersion="0x00020000"
        android:required="true"/>
    
    <permission
        android:name="com.example.permission.MAPS_RECEIVE"
        android:protectionLevel="signature"/>
    <uses-permission android:name="com.example.permission.MAPS_RECEIVE"/>
    
    <application
        android:icon="@drawable/ic_launcher"
        android:label="@string/app_name"
        android:theme="@style/AppTheme" >
        
        <meta-data
            android:name="com.google.android.maps.v2.API_KEY"
            android:value="your_key"/>
        
        <activity
            android:name=".HomeActivity"
            android:label="@string/app_name" >
            <intent-filter>
                <action android:name="android.intent.action.MAIN" />
                <category android:name="android.intent.category.LAUNCHER" />
            </intent-filter>
        </activity>
    
    </application>
 
</manifest>

some_layout.xml

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent" >
    
    <com.google.android.gms.maps.MapView android:id="@+id/mapview"
        android:layout_width="fill_parent" 
        android:layout_height="fill_parent" />
 
</LinearLayout>

Service Locator Pattern - ServiceLocatorFactoryBean keeps information of all the beans in the context. When client code asks for a service (bean) using name, it simply locates that bean in the context and returns it. Client code does not need to write spring related code to locate a bean.

You need to use file module for this case. Below playbook you can use for your reference.

    ---
     - hosts: <Your target host group>
       name: play1
       tasks: 
        - name: Create Directory
          files:
           path=/srv/www/
           owner=<Intended User>
           mode=<Intended permission, e.g.: 0750>
           state=directory 

Old question but this answer might help someone.

If you are trying to display the contents of the container outside of the boundaries of the container, make sure that it doesn't have overflow:hidden, otherwise anything outside of it will be cut off.

From the Solution Explorer window select your form, right-click, click on View Designer. Voila! The form should display.

I tried posting a couple screenshots, but this is my first post; therefore, I could not post any images.

Actually, you can try to use boost library,I think std::string doesn't supply enough method to do all the common string operation.In boost,you can just use the boost::algorithm::contains:

#include <string>
#include <boost/algorithm/string.hpp>

int main() {
    std::string s("gengjiawen");
    std::string t("geng");
    bool b = boost::algorithm::contains(s, t);
    std::cout << b << std::endl;
    return 0;
}

"ModelState.IsValid" tells you that the model is consumed by the view (i.e. PaymentAdviceEntity) is satisfy all types of validation or not specified in the model properties by DataAnotation.

In this code the view does not bind any model properties. So if you put any DataAnotations or validation in model (i.e. PaymentAdviceEntity). then the validations are not satisfy. say if any properties in model is Name which makes required in model.Then the value of the property remains blank after post.So the model is not valid (i.e. ModelState.IsValid returns false). You need to remove the model level validations.

What you show looks like a mesh warp. That would be straightforward using OpenGL, but "straightforward OpenGL" is like straightforward rocket science.

I wrote an iOS app for my company called Face Dancerthat's able to do 60 fps mesh warp animations of video from the built-in camera using OpenGL, but it was a lot of work. (It does funhouse mirror type changes to faces - think "fat booth" live, plus lots of other effects.)

Why the loop?

You could simply do this:

{% if 'priority' in data %}
    <p>Priority: {{ data['priority'] }}</p>
{% endif %}

When you were originally doing your string comparison, you should have used == instead.

If you don't want the Drop list to show up like a popup. You can customize it this way just like me (it will show up as if on the same flat, see image below):

After expand:

Please follow the steps below: First, create a dart file named drop_list_model.dart:

import 'package:flutter/material.dart';

class DropListModel {
  DropListModel(this.listOptionItems);

  final List<OptionItem> listOptionItems;
}

class OptionItem {
  final String id;
  final String title;

  OptionItem({@required this.id, @required this.title});
}

Next, create file file select_drop_list.dart:

import 'package:flutter/material.dart';
import 'package:time_keeping/model/drop_list_model.dart';
import 'package:time_keeping/widgets/src/core_internal.dart';

class SelectDropList extends StatefulWidget {
  final OptionItem itemSelected;
  final DropListModel dropListModel;
  final Function(OptionItem optionItem) onOptionSelected;

  SelectDropList(this.itemSelected, this.dropListModel, this.onOptionSelected);

  @override
  _SelectDropListState createState() => _SelectDropListState(itemSelected, dropListModel);
}

class _SelectDropListState extends State<SelectDropList> with SingleTickerProviderStateMixin {

  OptionItem optionItemSelected;
  final DropListModel dropListModel;

  AnimationController expandController;
  Animation<double> animation;

  bool isShow = false;

  _SelectDropListState(this.optionItemSelected, this.dropListModel);

  @override
  void initState() {
    super.initState();
    expandController = AnimationController(
        vsync: this,
        duration: Duration(milliseconds: 350)
    );
    animation = CurvedAnimation(
      parent: expandController,
      curve: Curves.fastOutSlowIn,
    );
    _runExpandCheck();
  }

  void _runExpandCheck() {
    if(isShow) {
      expandController.forward();
    } else {
      expandController.reverse();
    }
  }

  @override
  void dispose() {
    expandController.dispose();
    super.dispose();
  }

  @override
  Widget build(BuildContext context) {
    return Container(
      child: Column(
        children: <Widget>[
          Container(
            padding: const EdgeInsets.symmetric(
                horizontal: 15, vertical: 17),
            decoration: new BoxDecoration(
              borderRadius: BorderRadius.circular(20.0),
              color: Colors.white,
              boxShadow: [
                BoxShadow(
                    blurRadius: 10,
                    color: Colors.black26,
                    offset: Offset(0, 2))
              ],
            ),
            child: new Row(
              mainAxisSize: MainAxisSize.max,
              crossAxisAlignment: CrossAxisAlignment.center,
              children: <Widget>[
                Icon(Icons.card_travel, color: Color(0xFF307DF1),),
                SizedBox(width: 10,),
                Expanded(
                    child: GestureDetector(
                      onTap: () {
                        this.isShow = !this.isShow;
                        _runExpandCheck();
                        setState(() {

                        });
                      },
                      child: Text(optionItemSelected.title, style: TextStyle(
                          color: Color(0xFF307DF1),
                          fontSize: 16),),
                    )
                ),
                Align(
                  alignment: Alignment(1, 0),
                  child: Icon(
                    isShow ? Icons.arrow_drop_down : Icons.arrow_right,
                    color: Color(0xFF307DF1),
                    size: 15,
                  ),
                ),
              ],
            ),
          ),
          SizeTransition(
              axisAlignment: 1.0,
              sizeFactor: animation,
              child: Container(
                margin: const EdgeInsets.only(bottom: 10),
                  padding: const EdgeInsets.only(bottom: 10),
                  decoration: new BoxDecoration(
                    borderRadius: BorderRadius.only(bottomLeft: Radius.circular(20), bottomRight: Radius.circular(20)),
                    color: Colors.white,
                    boxShadow: [
                      BoxShadow(
                          blurRadius: 4,
                          color: Colors.black26,
                          offset: Offset(0, 4))
                    ],
                  ),
                  child: _buildDropListOptions(dropListModel.listOptionItems, context)
              )
          ),
//          Divider(color: Colors.grey.shade300, height: 1,)
        ],
      ),
    );
  }

  Column _buildDropListOptions(List<OptionItem> items, BuildContext context) {
    return Column(
      children: items.map((item) => _buildSubMenu(item, context)).toList(),
    );
  }

  Widget _buildSubMenu(OptionItem item, BuildContext context) {
    return Padding(
      padding: const EdgeInsets.only(left: 26.0, top: 5, bottom: 5),
      child: GestureDetector(
        child: Row(
          children: <Widget>[
            Expanded(
              flex: 1,
              child: Container(
                padding: const EdgeInsets.only(top: 20),
                decoration: BoxDecoration(
                  border: Border(top: BorderSide(color: Colors.grey[200], width: 1)),
                ),
                child: Text(item.title,
                    style: TextStyle(
                        color: Color(0xFF307DF1),
                        fontWeight: FontWeight.w400,
                        fontSize: 14),
                    maxLines: 3,
                    textAlign: TextAlign.start,
                    overflow: TextOverflow.ellipsis),
              ),
            ),
          ],
        ),
        onTap: () {
          this.optionItemSelected = item;
          isShow = false;
          expandController.reverse();
          widget.onOptionSelected(item);
        },
      ),
    );
  }

}

Initialize value:

DropListModel dropListModel = DropListModel([OptionItem(id: "1", title: "Option 1"), OptionItem(id: "2", title: "Option 2")]);
OptionItem optionItemSelected = OptionItem(id: null, title: "Ch?n quy?n truy c?p");

Finally use it:

SelectDropList(
           this.optionItemSelected, 
           this.dropListModel, 
           (optionItem){
                 optionItemSelected = optionItem;
                    setState(() {
  
                    });
               },
            )

INSERT
INTO    Employee 
        (emp_id, emp_name, emp_address, emp_state, emp_position, emp_manager)
SELECT  '001', 'John Doe', '1 River Walk, Green Street', state_id, position_id, manager_id
FROM    dual
JOIN    state s
ON      s.state_name = 'New York'
JOIN    positions p
ON      p.position_name = 'Sales Executive'
JOIN    manager m
ON      m.manager_name = 'Barry Green'

Note that but a single spelling mistake (or an extra space) will result in a non-match and nothing will be inserted.

$ pwd; ls -l
/home/victoria/test
total 12
-rw-r--r-- 1 victoria victoria    0 Apr 23 11:31  a
-rw-r--r-- 1 victoria victoria    0 Apr 23 11:31  b
-rw-r--r-- 1 victoria victoria    0 Apr 23 11:31  c
-rw-r--r-- 1 victoria victoria    0 Apr 23 11:32 'c d'
-rw-r--r-- 1 victoria victoria    0 Apr 23 11:31  d
drwxr-xr-x 2 victoria victoria 4096 Apr 23 11:32  dir_a
drwxr-xr-x 2 victoria victoria 4096 Apr 23 11:32  dir_b
-rw-r--r-- 1 victoria victoria    0 Apr 23 11:32 'e; f'

$ find . -type f
./c
./b
./a
./d
./c d
./e; f

$ find . -type f | sed 's/^\.\///g' | sort
a
b
c
c d
d
e; f

$ find . -type f | sed 's/^\.\///g' | sort > tmp

$ cat tmp
a
b
c
c d
d
e; f

Variations

$ pwd
/home/victoria

$ find $(pwd) -maxdepth 1 -type f -not -path '*/\.*' | sort
/home/victoria/new
/home/victoria/new1
/home/victoria/new2
/home/victoria/new3
/home/victoria/new3.md
/home/victoria/new.md
/home/victoria/package.json
/home/victoria/Untitled Document 1
/home/victoria/Untitled Document 2

$ find . -maxdepth 1 -type f -not -path '*/\.*' | sed 's/^\.\///g' | sort
new
new1
new2
new3
new3.md
new.md
package.json
Untitled Document 1
Untitled Document 2

Notes:

• . : current folder
• remove -maxdepth 1 to search recursively
• -type f : find files, not directories (d)
• -not -path '*/\.*' : do not return .hidden_files
• sed 's/^\.\///g' : remove the prepended ./ from the result list

I was trying to test an extjs application and after sucessfully setting a testingAuthenticationToken this suddenly stopped working with no obvious cause.

I couldn't get the above answers to work so my solution was to skip out this bit of spring in the test environment. I introduced a seam around spring like this:

public class SpringUserAccessor implements UserAccessor
{
    @Override
    public User getUser()
    {
        SecurityContext context = SecurityContextHolder.getContext();
        Authentication authentication = context.getAuthentication();
        return (User) authentication.getPrincipal();
    }
}

User is a custom type here.

I'm then wrapping it in a class which just has an option for the test code to switch spring out.

public class CurrentUserAccessor
{
    private static UserAccessor _accessor;

    public CurrentUserAccessor()
    {
        _accessor = new SpringUserAccessor();
    }

    public User getUser()
    {
        return _accessor.getUser();
    }

    public static void UseTestingAccessor(User user)
    {
        _accessor = new TestUserAccessor(user);
    }
}

The test version just looks like this:

public class TestUserAccessor implements UserAccessor
{
    private static User _user;

    public TestUserAccessor(User user)
    {
        _user = user;
    }

    @Override
    public User getUser()
    {
        return _user;
    }
}

In the calling code I'm still using a proper user loaded from the database:

    User user = (User) _userService.loadUserByUsername(username);
    CurrentUserAccessor.UseTestingAccessor(user);

Obviously this wont be suitable if you actually need to use the security but I'm running with a no-security setup for the testing deployment. I thought someone else might run into a similar situation. This is a pattern I've used for mocking out static dependencies before. The other alternative is you can maintain the staticness of the wrapper class but I prefer this one as the dependencies of the code are more explicit since you have to pass CurrentUserAccessor into classes where it is required.

A loose analogy is, "Meteor is to Node as Rails is to Ruby." It's a large, opinionated framework that uses Node on the server. Node itself is just a low-level framework providing functions for sending and receiving HTTP requests and performing other I/O.

Meteor is radically ambitious: By default, every page it serves is actually a Handlebars template that's kept in sync with the server. Try the Leaderboard example: You create a template that simply says "List the names and scores," and every time any client changes a name or score, the page updates with the new data—not just for that client, but for everyone viewing the page.

Another difference: While Node itself is stable and widely used in production, Meteor is in a "preview" state. There are serious bugs, and certain things that don't fit with Meteor's data-centric conceptual model (such as animations) are very hard to do.

If you love playing with new technologies, give Meteor a spin. If you want a more traditional, stable web framework built on Node, take a look at Express.

Another easy way... using UPDATE IGNORE:

U have to use an index on one or more columns (type index). Create a new temporary reference column (not part of the index). In this column, you mark the uniques in by updating it with ignore clause. Step by step:

Add a temporary reference column to mark the uniques:

ALTER TABLE `yourtable` ADD `unique` VARCHAR(3) NOT NULL AFTER `lastcolname`;

=> this will add a column to your table.

Update the table, try to mark everything as unique, but ignore possible errors due to to duplicate key issue (records will be skipped):

UPDATE IGNORE `yourtable` SET `unique` = 'Yes' WHERE 1;

=> you will find your duplicate records will not be marked as unique = 'Yes', in other words only one of each set of duplicate records will be marked as unique.

Delete everything that's not unique:

DELETE * FROM `yourtable` WHERE `unique` <> 'Yes';

=> This will remove all duplicate records.

Drop the column...

ALTER TABLE `yourtable` DROP `unique`;

if [[ $gg =~ ^....grid.* ]]

Worked perfectly for me to calculate SQL database size in SQL Server 2012

exec sp_spaceused

Just make sure put single space before and after "and" Keyword..

div hover background color change

Try like this:

.class_name:hover{
    background-color:#FF0000;
}

If your dropdown is something like this:

<select id="thedropdown">
  <option value="1">one</option>
  <option value="2">two</option>
</select>

Then you would use something like:

var a = document.getElementById("thedropdown");
alert(a.options[a.selectedIndex].value);

But a library like jQuery simplifies things:

alert($('#thedropdown').val());

clang++ 3.5 even warns on it:

/tmp/a.C:3:7: warning: reference cannot be bound to dereferenced null pointer in well-defined C++ code; comparison may be assumed to
      always evaluate to false [-Wtautological-undefined-compare]
if( & nullReference == 0 ) // null reference
      ^~~~~~~~~~~~~    ~
1 warning generated.

Probably is APC related.

For the people having this problem, please specify you .ini settings. Specifically your apc.mmap_file_mask setting.

For file-backed mmap, it should be set to something like:

apc.mmap_file_mask=/tmp/apc.XXXXXX

To mmap directly from /dev/zero, use:

apc.mmap_file_mask=/dev/zero

For POSIX-compliant shared-memory-backed mmap, use:

apc.mmap_file_mask=/apc.shm.XXXXXX

sudo pip3 install --upgrade --force-reinstall --no-deps --no-cache-dir <package-name>==<package-version>

Some relevant answers:

Difference between pip install options "ignore-installed" and "force-reinstall"

Under the general heading of 'editors always forget to document getting out…' to toggle go to another line and press the combination ctrl+shift+'N' to erase the current bookmark do the same on marked line…

I made the assumption that the number of factors is only large if the numbers involved have many small factors. So I used thaumkid's excellent algorithm, but first used an approximation to the factor count that is never too small. It's quite simple: Check for prime factors up to 29, then check the remaining number and calculate an upper bound for the nmber of factors. Use this to calculate an upper bound for the number of factors, and if that number is high enough, calculate the exact number of factors.

The code below doesn't need this assumption for correctness, but to be fast. It seems to work; only about one in 100,000 numbers gives an estimate that is high enough to require a full check.

Here's the code:

// Return at least the number of factors of n.
static uint64_t approxfactorcount (uint64_t n)
{
    uint64_t count = 1, add;

#define CHECK(d)                            \
    do {                                    \
        if (n % d == 0) {                   \
            add = count;                    \
            do { n /= d; count += add; }    \
            while (n % d == 0);             \
        }                                   \
    } while (0)

    CHECK ( 2); CHECK ( 3); CHECK ( 5); CHECK ( 7); CHECK (11); CHECK (13);
    CHECK (17); CHECK (19); CHECK (23); CHECK (29);
    if (n == 1) return count;
    if (n < 1ull * 31 * 31) return count * 2;
    if (n < 1ull * 31 * 31 * 37) return count * 4;
    if (n < 1ull * 31 * 31 * 37 * 37) return count * 8;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41) return count * 16;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43) return count * 32;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43 * 47) return count * 64;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43 * 47 * 53) return count * 128;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43 * 47 * 53 * 59) return count * 256;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43 * 47 * 53 * 59 * 61) return count * 512;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43 * 47 * 53 * 59 * 61 * 67) return count * 1024;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43 * 47 * 53 * 59 * 61 * 67 * 71) return count * 2048;
    if (n < 1ull * 31 * 31 * 37 * 37 * 41 * 43 * 47 * 53 * 59 * 61 * 67 * 71 * 73) return count * 4096;
    return count * 1000000;
}

// Return the number of factors of n.
static uint64_t factorcount (uint64_t n)
{
    uint64_t count = 1, add;

    CHECK (2); CHECK (3);

    uint64_t d = 5, inc = 2;
    for (; d*d <= n; d += inc, inc = (6 - inc))
        CHECK (d);

    if (n > 1) count *= 2; // n must be a prime number
    return count;
}

// Prints triangular numbers with record numbers of factors.
static void printrecordnumbers (uint64_t limit)
{
    uint64_t record = 30000;

    uint64_t count1, factor1;
    uint64_t count2 = 1, factor2 = 1;

    for (uint64_t n = 1; n <= limit; ++n)
    {
        factor1 = factor2;
        count1 = count2;

        factor2 = n + 1; if (factor2 % 2 == 0) factor2 /= 2;
        count2 = approxfactorcount (factor2);

        if (count1 * count2 > record)
        {
            uint64_t factors = factorcount (factor1) * factorcount (factor2);
            if (factors > record)
            {
                printf ("%lluth triangular number = %llu has %llu factors\n", n, factor1 * factor2, factors);
                record = factors;
            }
        }
    }
}

This finds the 14,753,024th triangular with 13824 factors in about 0.7 seconds, the 879,207,615th triangular number with 61,440 factors in 34 seconds, the 12,524,486,975th triangular number with 138,240 factors in 10 minutes 5 seconds, and the 26,467,792,064th triangular number with 172,032 factors in 21 minutes 25 seconds (2.4GHz Core2 Duo), so this code takes only 116 processor cycles per number on average. The last triangular number itself is larger than 2^68, so

By Java class, I am assuming you mean a Servlet class as setting session attribute in arbitrary Java class does not make sense.You can do something like this in your servlet's doGet/doPost methods

public void doGet(HttpServletRequest request, HttpServletResponse response) {

    HttpSession session = request.getSession();
    String username = (String)request.getAttribute("un");
    session.setAttribute("UserName", username);
}

I have polished this missing subclass of QLabel. It is awesome and works well.

aspectratiopixmaplabel.h

#ifndef ASPECTRATIOPIXMAPLABEL_H
#define ASPECTRATIOPIXMAPLABEL_H

#include <QLabel>
#include <QPixmap>
#include <QResizeEvent>

class AspectRatioPixmapLabel : public QLabel
{
    Q_OBJECT
public:
    explicit AspectRatioPixmapLabel(QWidget *parent = 0);
    virtual int heightForWidth( int width ) const;
    virtual QSize sizeHint() const;
    QPixmap scaledPixmap() const;
public slots:
    void setPixmap ( const QPixmap & );
    void resizeEvent(QResizeEvent *);
private:
    QPixmap pix;
};

#endif // ASPECTRATIOPIXMAPLABEL_H

aspectratiopixmaplabel.cpp

#include "aspectratiopixmaplabel.h"
//#include <QDebug>

AspectRatioPixmapLabel::AspectRatioPixmapLabel(QWidget *parent) :
    QLabel(parent)
{
    this->setMinimumSize(1,1);
    setScaledContents(false);
}

void AspectRatioPixmapLabel::setPixmap ( const QPixmap & p)
{
    pix = p;
    QLabel::setPixmap(scaledPixmap());
}

int AspectRatioPixmapLabel::heightForWidth( int width ) const
{
    return pix.isNull() ? this->height() : ((qreal)pix.height()*width)/pix.width();
}

QSize AspectRatioPixmapLabel::sizeHint() const
{
    int w = this->width();
    return QSize( w, heightForWidth(w) );
}

QPixmap AspectRatioPixmapLabel::scaledPixmap() const
{
    return pix.scaled(this->size(), Qt::KeepAspectRatio, Qt::SmoothTransformation);
}

void AspectRatioPixmapLabel::resizeEvent(QResizeEvent * e)
{
    if(!pix.isNull())
        QLabel::setPixmap(scaledPixmap());
}

Hope that helps! (Updated resizeEvent, per @dmzl's answer)

Different version similar to the one offered by Maxim Shoustin

I liked the answer but the part that bothered me was the use of <script id="..."> as a container for the modal's template.

I wanted to place the modal's template in a hidden <div> and bind the inner html with a scope variable called modal_html_template mainly because i think it more correct (and more comfortable to process in WebStorm/PyCharm) to place the template's html inside a <div> instead of <script id="...">

this variable will be used when calling $modal({... 'template': $scope.modal_html_template, ...})

in order to bind the inner html, i created inner-html-bind which is a simple directive

check out the example plunker

<div ng-controller="ModalDemoCtrl">

    <div inner-html-bind inner-html="modal_html_template" class="hidden">
        <div class="modal-header">
            <h3>I'm a modal!</h3>
        </div>
        <div class="modal-body">
            <ul>
                <li ng-repeat="item in items">
                    <a ng-click="selected.item = item">{{ item }}</a>
                </li>
            </ul>
            Selected: <b>{{ selected.item }}</b>
        </div>
        <div class="modal-footer">
            <button class="btn btn-primary" ng-click="ok()">OK</button>
            <button class="btn btn-warning" ng-click="cancel()">Cancel</button>
        </div>
    </div>

    <button class="btn" ng-click="open()">Open me!</button>
    <div ng-show="selected">Selection from a modal: {{ selected }}</div>
</div>

inner-html-bind directive:

app.directive('innerHtmlBind', function() {
  return {
    restrict: 'A',
    scope: {
      inner_html: '=innerHtml'
    },
    link: function(scope, element, attrs) {
      scope.inner_html = element.html();
    }
  }
});

In my experience, the most friendly way of dealing with this is to have a function that converts a string into a table of values.

There are many splitter functions available on the web, you'll easily find one for whatever if your flavour of SQL.

You can then do...

SELECT * FROM table WHERE id IN (SELECT id FROM split(@list_of_ids))

Or

SELECT * FROM table INNER JOIN (SELECT id FROM split(@list_of_ids)) AS list ON list.id = table.id

(Or similar)

I use this code for VB:

<asp:TemplateField HeaderText="Active" SortExpression="Active">
    <ItemTemplate><%#IIf(Boolean.Parse(Eval("Active").ToString()), "Yes", "No")%></ItemTemplate>
</asp:TemplateField>

And this should work for C# (untested):

<asp:TemplateField HeaderText="Active" SortExpression="Active">
    <ItemTemplate><%# (Boolean.Parse(Eval("Active").ToString())) ? "Yes" : "No" %></ItemTemplate>
</asp:TemplateField>

Here's how you can do it in your Activity's onCreate method:

NavigationView navigationView = findViewById(R.id.nav_view);
ColorStateList csl = new ColorStateList(
    new int[][] {
        new int[] {-android.R.attr.state_checked}, // unchecked
        new int[] { android.R.attr.state_checked}  // checked
    },
    new int[] {
        Color.BLACK,
        Color.RED
    }
);
navigationView.setItemTextColor(csl);
navigationView.setItemIconTintList(csl);

Use the latest maven in your classpath.. It will remove the duplicate artifacts and keep the latest maven artifact..

And for SBT : excludeDependencies += "log4j" % "log4j"

There is a small bug in the above code (by the way Dave it was very helpful your post thank you)

In the part where we save the credentials it also needs the following code in order to work properly.

[self.keychainItem setObject:@"myCredentials" forKey:(__bridge id)(kSecAttrService)];

most probably is because the second time we try to (re-)sign in with the same credentials it finds them already assigned in the keychain items and the app crashes. with the above code it works like a charm.

Looks like the invisible character -

ALT+255

Try this

select REPLACE(ProductAlternateKey, ' ', '@')
--type ALT+255 instead of space for the second expression in REPLACE 
from DimProducts
where ProductAlternateKey  like '46783815%'

Raj

Edit: Based on ASCII() results, try ALT+10 - use numeric keypad

I got this error message with vs2015, ssdt 14.1.xxx, ssrs. For me I think it was something different than described above with a 2 column, same name problem. I added this report, then deleted the report, then when I tried to add the query back in the ssrs wizard I got this message, " An error occurred while the query design method was being saved :invalid object name: tablename" . where tablename was the table on the query the wizard was reading. I tried cleaning the project, I tried rebuilding the project. In my opinion Microsoft isn't completing cleaning out the report when you delete it and as long as you try to add the original query back it won't add. The way I was able to fix it was to create the ssrs report in a whole new project (obviously nothing wrong with the query) and save it off to the side. Then I reopened my original ssrs project, right clicked on Reports, then Add, then add Existing Item. The report added back in just fine with no name conflict.

because you are just learning I suggest you practice converting a SELECT joins to UPDATE or DELETE joins. First I suggest you generate a SELECT statement joining these two tables:

SELECT *
FROM    tempDataView a
        INNER JOIN tempData b
            ON a.Name = b.Name

Then note that we have two table aliases a and b. Using these aliases you can easily generate UPDATE statement to update either table a or b. For table a you have an answer provided by JW. If you want to update b, the statement will be:

UPDATE  b
SET     b.marks = a.marks
FROM    tempDataView a
        INNER JOIN tempData b
            ON a.Name = b.Name

Now, to convert the statement to a DELETE statement use the same approach. The statement below will delete from a only (leaving b intact) for those records that match by name:

DELETE a
FROM    tempDataView a
        INNER JOIN tempData b
            ON a.Name = b.Name

You can use the SQL Fiddle created by JW as a playground

Try either

• sudo apt-get install php-zip or
• sudo apt-get install php5.6-zip

Then, you might have to restart your web server.

• sudo service apache2 restart or
• sudo service nginx restart

If you are installing on centos or fedora OS then use yum in place of apt-get. example:-

sudo yum install php-zip or sudo yum install php5.6-zip and sudo service httpd restart

Yes, try wrapping it with <pre>, e.g.:

echo '<pre>' , var_dump($variable) , '</pre>';

window.onload = function() { ... etc. is not a great answer.

This will likely work, but it will also break any other functions already hooking to that event. Or, if another function hooks into that event after yours, it will break yours. So, you can spend lots of hours later trying to figure out why something that was working isn't anymore.

A more robust answer here:

if(window.attachEvent) {
    window.attachEvent('onload', yourFunctionName);
} else {
    if(window.onload) {
        var curronload = window.onload;
        var newonload = function(evt) {
            curronload(evt);
            yourFunctionName(evt);
        };
        window.onload = newonload;
    } else {
        window.onload = yourFunctionName;
    }
}

Some code I have been using, I forget where I found it to give the author credit.

function my_function() {
    // whatever code I want to run after page load
}
if (window.attachEvent) {window.attachEvent('onload', my_function);}
else if (window.addEventListener) {window.addEventListener('load', my_function, false);}
else {document.addEventListener('load', my_function, false);}

Hope this helps :)

1: Add the following line into the AssemblyInfo class

[assembly: log4net.Config.XmlConfigurator(Watch = true)]

2: Make sure you don't use .Net Framework 4 Client Profile as Target Framework (I think this is OK on your side because otherwise it even wouldn't compile)

3: Make sure you log very early in your program. Otherwise, in some scenarios, it will not be initialized properly (read more on log4net FAQ).

So log something during application startup in the Global.asax

public class Global : System.Web.HttpApplication
{
    private static readonly log4net.ILog Log = log4net.LogManager.GetLogger(typeof(Global));
    protected void Application_Start(object sender, EventArgs e)
    {
        Log.Info("Startup application.");
    }
}

4: Make sure you have permission to create files and folders on the given path (if the folder itself also doesn't exist)

5: The rest of your given information looks ok

Pure bash way:

~$ x="/foo/bar/fizzbuzz.bar.quux.zoom"; 
~$ y=${x/\/*\//}; 
~$ echo ${y/.*/}; 
fizzbuzz

This functionality is explained on man bash under "Parameter Expansion". Non bash ways abound: awk, perl, sed and so on.

EDIT: Works with dots in file suffixes and doesn't need to know the suffix (extension), but doesn’t work with dots in the name itself.

I Get the same message, when using Intel XHAM emulator (instead of ARM) and have "Use Host GPU" option enabled. I belive when you disable it, it goes away.

If you use PHP you could also use the MD5-Hash of the favicon as a query-string:

<link rel="shortcut icon" href="favicon.ico?v=<?php echo md5_file('favicon.ico') ?>" />

This way the Favicon will always refresh when it has been changed.

As pointed out in the comments you can also use the last modified date instead of the MD5-Hash to achieve the same thing and save a bit on server performance:

<link rel="shortcut icon" href="favicon.ico?v=<?php echo filemtime('favicon.ico') ?>" />

To expound slightly on GlennG's very helpful answer (translating the syntax from C# to VB.Net is not always "obvious") you can also decorate individual class properties to manage how null values are handled. If you do this don't use the global JsonSerializerSettings from GlennG's suggestion, otherwise it will override the individual decorations. This comes in handy if you want a null item to appear in the JSON so the consumer doesn't have to do any special handling. If, for example, the consumer needs to know an array of optional items is normally available, but is currently empty... The decoration in the property declaration looks like this:

<JsonPropertyAttribute("MyProperty", DefaultValueHandling:=NullValueHandling.Include)> Public Property MyProperty As New List(of String)

For those properties you don't want to have appear at all in the JSON change :=NullValueHandling.Include to :=NullValueHandling.Ignore. By the way - I've found that you can decorate a property for both XML and JSON serialization just fine (just put them right next to each other). This gives me the option to call the XML serializer in dotnet or the NewtonSoft serializer at will - both work side-by-side and my customers have the option to work with XML or JSON. This is slick as snot on a doorknob since I have customers that require both!

Replace < with < and > with >.

Having named method in place of the anonymous function in audioNode.addEventListener 's callback should eliminate the subject warning:

    componentDidMount(prevProps, prevState, prevContext) {
    let [audioNode, songLen] = [this.refs.audio, List.length-1];

    audioNode.addEventListener('ended', () => {
        this._endedPlay(songLen, () => {
            this._currSong(this.state.songIndex);
            this._Play(audioNode);
        });
    });

    audioNode.addEventListener('timeupdate', this.callbackMethod );
}

callBackMethod = () => {
    let [remainTime, remainTimeMin, remainTimeSec, remainTimeInfo] = [];

    if(!isNaN(audioNode.duration)) {
        remainTime = audioNode.duration - audioNode.currentTime;
        remainTimeMin = parseInt(remainTime/60);  // ???
        remainTimeSec = parseInt(remainTime%60);  // ???

        if(remainTimeSec < 10) {
            remainTimeSec = '0'+remainTimeSec;
        }
        remainTimeInfo = remainTimeMin + ':' + remainTimeSec;
        this.setState({'time': remainTimeInfo});
    }
}

And yes, named method is needed anyways because removeEventListener won't work with anonymous callbacks, as mentioned above several times.

The fastest way I found was this:

var obj = new {Id = thing.Id, Name = thing.Name, Age = 30};
JavaScriptSerializer serializer = new JavaScriptSerializer();
string json = serializer.Serialize(obj);

Namespace: System.Web.Script.Serialization.JavaScriptSerializer

I had the same problem but solved it with a switch statement switch(a value you are switching on) { case 1: the code you want to happen; case 2: the code you want to happen; default: return a value }

Your code is almost right! You are right, you are just missing one step. When you read in the file, you are reading it as a string; but you want to turn the string back into a dictionary.

The error message you saw was because self.whip was a string, not a dictionary.

I first wrote that you could just feed the string into dict() but that doesn't work! You need to do something else.

Example

Here is the simplest way: feed the string into eval(). Like so:

def reading(self):
    s = open('deed.txt', 'r').read()
    self.whip = eval(s)

You can do it in one line, but I think it looks messy this way:

def reading(self):
    self.whip = eval(open('deed.txt', 'r').read())

But eval() is sometimes not recommended. The problem is that eval() will evaluate any string, and if someone tricked you into running a really tricky string, something bad might happen. In this case, you are just running eval() on your own file, so it should be okay.

But because eval() is useful, someone made an alternative to it that is safer. This is called literal_eval and you get it from a Python module called ast.

import ast

def reading(self):
    s = open('deed.txt', 'r').read()
    self.whip = ast.literal_eval(s)

ast.literal_eval() will only evaluate strings that turn into the basic Python types, so there is no way that a tricky string can do something bad on your computer.

EDIT

Actually, best practice in Python is to use a with statement to make sure the file gets properly closed. Rewriting the above to use a with statement:

import ast

def reading(self):
    with open('deed.txt', 'r') as f:
        s = f.read()
        self.whip = ast.literal_eval(s)

In the most popular Python, known as "CPython", you usually don't need the with statement as the built-in "garbage collection" features will figure out that you are done with the file and will close it for you. But other Python implementations, like "Jython" (Python for the Java VM) or "PyPy" (a really cool experimental system with just-in-time code optimization) might not figure out to close the file for you. It's good to get in the habit of using with, and I think it makes the code pretty easy to understand.

I think you really need pandoc, which great software was designed and built just for this task :) Besides pdf, you could convert your md file to e.g. docx or odt among others.

Well, installing an up-to-date version of Pandoc might be challanging on Linux (as you would need the entire haskell-platform?to build from the sources), but really easy on Windows/Mac with only a few megabytes of download.

If you have the brewed/knitted markdown file you can just call pandoc in e.g bash or with the system function within R. A POC demo of that latter is implemented in the ?andoc.convert function of my little package (which you must be terribly bored of as I try to point your attention there at every opportunity).

The $('select').val('the_value'); looks the right solution and if you have data table rows then:

$row.find('#component').val('All');

Yes. Blat or any other self contained SMTP mailer. Blat is a fairly full featured SMTP client that runs from command line

Blat is here