I once have this problem too. My solution is to work around this problem by kill the application which is using the port. Here is a article to teach us how to check which application is using which port, find it and kill/close it.
Encountered this. all I did was to kill all the java process(Task Manager) and run again. It worked!
The question is answered already, but I want add more information about the causes.
Android app unable to start activity componentinfo
This error often comes with appropriate logs. You can read logs and can solve this issue easily.
Here is a sample log. In which you can see clearly ClassCastException
. So this issue came because TextView
cannot be cast to EditText
.
Caused by: java.lang.ClassCastException: android.widget.TextView cannot be cast to android.widget.EditText
11-04 01:24:10.403: D/AndroidRuntime(1050): Shutting down VM
11-04 01:24:10.403: W/dalvikvm(1050): threadid=1: thread exiting with uncaught exception (group=0x41465700)
11-04 01:24:10.543: E/AndroidRuntime(1050): FATAL EXCEPTION: main
11-04 01:24:10.543: E/AndroidRuntime(1050): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.troysantry.tipcalculator/com.troysantry.tipcalculator.TipCalc}: java.lang.ClassCastException: android.widget.TextView cannot be cast to android.widget.EditText
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2211)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2261)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.ActivityThread.access$600(ActivityThread.java:141)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1256)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.os.Handler.dispatchMessage(Handler.java:99)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.os.Looper.loop(Looper.java:137)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.ActivityThread.main(ActivityThread.java:5103)
11-04 01:24:10.543: E/AndroidRuntime(1050): at java.lang.reflect.Method.invokeNative(Native Method)
11-04 01:24:10.543: E/AndroidRuntime(1050): at java.lang.reflect.Method.invoke(Method.java:525)
11-04 01:24:10.543: E/AndroidRuntime(1050): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:737)
11-04 01:24:10.543: E/AndroidRuntime(1050): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:553)
11-04 01:24:10.543: E/AndroidRuntime(1050): at dalvik.system.NativeStart.main(Native Method)
11-04 01:24:10.543: E/AndroidRuntime(1050): Caused by: java.lang.ClassCastException: android.widget.TextView cannot be cast to android.widget.EditText
11-04 01:24:10.543: E/AndroidRuntime(1050): at com.troysantry.tipcalculator.TipCalc.onCreate(TipCalc.java:45)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.Activity.performCreate(Activity.java:5133)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1087)
11-04 01:24:10.543: E/AndroidRuntime(1050): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2175)
11-04 01:24:10.543: E/AndroidRuntime(1050): ... 11 more
11-04 01:29:11.177: I/Process(1050): Sending signal. PID: 1050 SIG: 9
11-04 01:31:32.080: D/AndroidRuntime(1109): Shutting down VM
11-04 01:31:32.080: W/dalvikvm(1109): threadid=1: thread exiting with uncaught exception (group=0x41465700)
11-04 01:31:32.194: E/AndroidRuntime(1109): FATAL EXCEPTION: main
11-04 01:31:32.194: E/AndroidRuntime(1109): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.troysantry.tipcalculator/com.troysantry.tipcalculator.TipCalc}: java.lang.ClassCastException: android.widget.TextView cannot be cast to android.widget.EditText
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2211)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2261)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.ActivityThread.access$600(ActivityThread.java:141)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1256)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.os.Handler.dispatchMessage(Handler.java:99)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.os.Looper.loop(Looper.java:137)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.ActivityThread.main(ActivityThread.java:5103)
11-04 01:31:32.194: E/AndroidRuntime(1109): at java.lang.reflect.Method.invokeNative(Native Method)
11-04 01:31:32.194: E/AndroidRuntime(1109): at java.lang.reflect.Method.invoke(Method.java:525)
11-04 01:31:32.194: E/AndroidRuntime(1109): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:737)
11-04 01:31:32.194: E/AndroidRuntime(1109): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:553)
11-04 01:31:32.194: E/AndroidRuntime(1109): at dalvik.system.NativeStart.main(Native Method)
11-04 01:31:32.194: E/AndroidRuntime(1109): Caused by: java.lang.ClassCastException: android.widget.TextView cannot be cast to android.widget.EditText
11-04 01:31:32.194: E/AndroidRuntime(1109): at com.troysantry.tipcalculator.TipCalc.onCreate(TipCalc.java:44)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.Activity.performCreate(Activity.java:5133)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1087)
11-04 01:31:32.194: E/AndroidRuntime(1109): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2175)
11-04 01:31:32.194: E/AndroidRuntime(1109): ... 11 more
11-04 01:36:33.195: I/Process(1109): Sending signal. PID: 1109 SIG: 9
11-04 02:11:09.684: D/AndroidRuntime(1167): Shutting down VM
11-04 02:11:09.684: W/dalvikvm(1167): threadid=1: thread exiting with uncaught exception (group=0x41465700)
11-04 02:11:09.855: E/AndroidRuntime(1167): FATAL EXCEPTION: main
11-04 02:11:09.855: E/AndroidRuntime(1167): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.troysantry.tipcalculator/com.troysantry.tipcalculator.TipCalc}: java.lang.ClassCastException: android.widget.TextView cannot be cast to android.widget.EditText
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2211)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2261)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.ActivityThread.access$600(ActivityThread.java:141)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1256)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.os.Handler.dispatchMessage(Handler.java:99)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.os.Looper.loop(Looper.java:137)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.ActivityThread.main(ActivityThread.java:5103)
11-04 02:11:09.855: E/AndroidRuntime(1167): at java.lang.reflect.Method.invokeNative(Native Method)
11-04 02:11:09.855: E/AndroidRuntime(1167): at java.lang.reflect.Method.invoke(Method.java:525)
11-04 02:11:09.855: E/AndroidRuntime(1167): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:737)
11-04 02:11:09.855: E/AndroidRuntime(1167): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:553)
11-04 02:11:09.855: E/AndroidRuntime(1167): at dalvik.system.NativeStart.main(Native Method)
11-04 02:11:09.855: E/AndroidRuntime(1167): Caused by: java.lang.ClassCastException: android.widget.TextView cannot be cast to android.widget.EditText
11-04 02:11:09.855: E/AndroidRuntime(1167): at com.troysantry.tipcalculator.TipCalc.onCreate(TipCalc.java:44)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.Activity.performCreate(Activity.java:5133)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1087)
11-04 02:11:09.855: E/AndroidRuntime(1167): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2175)
11-04 02:11:09.855: E/AndroidRuntime(1167): ... 11 more
findViewById()
of non existing viewLike when you use findViewById(R.id.button)
when button id does not exist in layout XML.
If you wrong cast some class, then you get this error. Like you cast RelativeLayout
to LinearLayout
or EditText
to TextView
.
manifest.xml
If you did not register Activity in manifest.xml
then this error comes.
findViewById()
with declaration at top levelBelow code is incorrect. This will create error. Because you should do findViewById()
after calling setContentView()
. Because an View can be there after it is created.
public class MainActivity extends Activity {
ImageView mainImage = (ImageView) findViewById(R.id.imageViewMain); //incorrect way
@Override
protected void onCreate(Bundle savedInstanceState){
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
mainImage = (ImageView) findViewById(R.id.imageViewMain); //correct way
//...
}
}
abstract
Activity class.When you try to start an Activity which is abstract, you will will get this error. So just remove abstract
keyword before activity class name.
If your activity is written in Kotlin and you have not setup kotlin in your app. then you will get error. You can follow simple steps as written in Android Link or Kotlin Link. You can check this answer too.
Read about Downcast and Upcast
SOLUTION :-
I was getting the same error as I was opening two eclipse window, so I close one eclipse window and run the app again. You will not get the error.
restart(close and start) the eclipse again if you have open only one eclipse window.
I spent some time on this to get the right information.
So here is the detailed information step by step.
Environment : Windows 7
TomCat version : 7.0
IDE : Eclipse
Configurations to be added for enabling remote debugging with in tomcat is
-Xdebug
-agentlib:jdwp=transport=dt_socket,address=8000,server=y,suspend=n
I don't recommend above configuration fro non windows environment. To add the above configuration double click on tomcat server which will be available in server view. Find the below screen shot.
Now add the above runtime environment configuration to tomcat. For this check below screenshot.
Now got to Arugments tab in Edit launch configuration properties as show in below screen shot.
GoTo VM arguments section add these lines.
-Xdebug
-agentlib:jdwp=transport=dt_socket,address=8000,server=y,suspend=n
Now got to debug button available on eclipse toolbar.
In Debug configurations find "Remote Java Application" and double click on it.
In Name field enter any name which you like to.
From project field using browse button select the project which you want to perform remote debug.
The hostname is nothing but the host address. Here i'm working locally so it is "localhost".
Last the Port column the value should be 8000. Apart from Name and Project text fields other two columns Host and port will be filled by eclipse itself if not make you have same values as mentioned. Check Screen shot for info.
Now right click on TomcatServer in server console select Add and Remove from context menu. From this dialog you can add the project to server.
Now run the Tomcat sever.
Now run the TomCatDebugConfiguration from Debug Tool.
Last open internal or external browser and run your project. If the execution control reached the break points then the eclipse will prompt for debug perspective.
I don't know of any JVM that actually checks the JAVA_OPTS
environment variable. Usually this is used in scripts which launch the JVM and they usually just add it to the java
command-line.
The key thing to understand here is that arguments to java
that come before the -jar analyse.jar
bit will only affect the JVM and won't be passed along to your program. So, modifying the java
line in your script to:
java $JAVA_OPTS -jar analyse.jar $*
Should "just work".
I'd like to emphasize that order of arguments is important.
For me java -agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=8000 -jar app.jar
command opens debugger port,
but java -jar app.jar -agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=8000
command doesn't.
Basic on @Horyun Lee answer, I wrote a small python script to help to investigate ANR from traces.txt
.
The ANRs will output as graphics by graphviz
if you have installed grapvhviz
on your system.
$ ./anr.py --format png ./traces.txt
A png will output like below if there are ANRs detected in file traces.txt
. It's more intuitive.
The sample traces.txt
file used above was get from here.
Another option would be file_get_contents()
:
// $xml_str = your xml
// $url = target url
$post_data = array('xml' => $xml_str);
$stream_options = array(
'http' => array(
'method' => 'POST',
'header' => 'Content-type: application/x-www-form-urlencoded' . "\r\n",
'content' => http_build_query($post_data)));
$context = stream_context_create($stream_options);
$response = file_get_contents($url, null, $context);
Easy and fast fix for me was to npm install the specific package on which it said the sha is wrong. Say your package is called awesome-package
.
My solution was:
npm i awesome-package
This updated my sha within the package-lock.json.
I don't blame you for getting frustrated about this. The best way to look at is this. There are potentially three versions of every remote branch:
refs/heads/master
)refs/remotes/...
)refs/remotes/origin/master
)refs/heads/master
)Let's start with git prune
. This removes objects that are no longer being referenced, it does not remove references. In your case, you have a local branch. That means there's a ref named random_branch_I_want_deleted
that refers to some objects that represent the history of that branch. So, by definition, git prune
will not remove random_branch_I_want_deleted
. Really, git prune
is a way to delete data that has accumulated in Git but is not being referenced by anything. In general, it doesn't affect your view of any branches.
git remote prune origin
and git fetch --prune
both operate on references under refs/remotes/...
(I'll refer to these as remote references). It doesn't affect local branches. The git remote
version is useful if you only want to remove remote references under a particular remote. Otherwise, the two do exactly the same thing. So, in short, git remote prune
and git fetch --prune
operate on number 2 above. For example, if you deleted a branch using the git web GUI and don't want it to show up in your local branch list anymore (git branch -r
), then this is the command you should use.
To remove a local branch, you should use git branch -d
(or -D
if it's not merged anywhere). FWIW, there is no git command to automatically remove the local tracking branches if a remote branch disappears.
For versions 1.13 and higher:
docker image rm [OPTIONS] IMAGE [IMAGE...]
Comparing:
docker image rm
anddocker rmi
,the [OPTIONS]
seem to have no difference.
--force , -f Force removal of the image
--no-prune Do not delete untagged parents
From: Introducing Docker 1.13
CLI restructured
In Docker 1.13, we regrouped every command to sit under the logical object it’s interacting with. For example
list
andstart
of containers are now subcommands ofdocker container
andhistory
is a subcommand ofdocker image
.These changes let us clean up the Docker CLI syntax, improve help text and make Docker simpler to use. The old command syntax is still supported, but we encourage everybody to adopt the new syntax.
Ok, i am shocked that no one really gave a good answer, now my turn. There are two cases;
A constant char array is good enough for you so you go with,
const char *array = tmp.c_str();
Or you need to modify the char array so constant is not ok, then just go with this
char *array = &tmp[0];
Both of them are just assignment operations and most of the time that is just what you need, if you really need a new copy then follow other fellows answers.
Add the following to package.json
:
"engines": {
"node": ">=10.0.0",
"npm": ">=6.0.0"
},
Add the following to .npmrc
(same directory as package.json
):
engine-strict=true
I solved this problem removing DbproviderFactory in the section system.data of the file machine.config, there was some dirty data when I installed fbclient.dll.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\machine.config C:\Windows\Microsoft.NET\Framework\v4.0.30319\Config\machine.config
<system.data>
<!-- <DbProviderFactories><add name="FirebirdClient Data Provider" invariant="FirebirdSql.Data.FirebirdClient" description=".NET Framework Data Provider for Firebird" type="FirebirdSql.Data.FirebirdClient.FirebirdClientFactory, FirebirdSql.Data.FirebirdClient, Version=4.10.0.0, Culture=neutral, PublicKeyToken=3750abcc3150b00c"/><add name="FirebirdClient Data Provider" invariant="FirebirdSql.Data.FirebirdClient" description=".NET Framework Data Provider for Firebird" type="FirebirdSql.Data.FirebirdClient.FirebirdClientFactory, FirebirdSql.Data.FirebirdClient, Version=6.4.0.0, Culture=neutral, PublicKeyToken=3750abcc3150b00c"/> -->
</system.data>
white spaces matter. when block is finished, that's when the function definition is finished.
when function runs, it keeps going until it finishes, or until return
or yield
statement is encountered. If function finishes without encountering return
or yield
statements None
is returned implicitly.
there is plenty more information in the tutorial.
I am using Guava which has annotation included:
(Gradle code )
compile 'com.google.guava:guava:23.4-jre'
I developed a generic statement to apply the filter:
string rowFilter = string.Format("[{0}] = '{1}'", columnName, filterValue);
(myDataGridView.DataSource as DataTable).DefaultView.RowFilter = rowFilter;
The square brackets allow for spaces in the column name.
Additionally, if you want to include multiple values in your filter, you can add the following line for each additional value:
rowFilter += string.Format(" OR [{0}] = '{1}'", columnName, additionalFilterValue);
another example following @jake stayman:
{% for key, item in row.divs %}
{% if (key not in [1,2,9]) %} // eliminate element 1,2,9
<li>{{ item }}</li>
{% endif %}
{% endfor %}
I had similar problem. For me the fix was to import HttpModule before HttpClient Module:
import { HttpModule } from '@angular/http';
import { HttpClientModule } from '@angular/common/http';
.
.
.
imports: [
BrowserModule,
HttpModule,
HttpClientModule
],
SELECT (SELECT COALESCE(SUM(London), 0) FROM CASH) + (SELECT COALESCE(SUM(London), 0) FROM CHEQUE) as result
'And so on and so forth.
"The COALESCE function basically says "return the first parameter, unless it's null in which case return the second parameter" - It's quite handy in these scenarios." Source
along with these two variants, there is also jade.renderFile
which generates html that need not be passed to the client.
usage-
var jade = require('jade');
exports.getJson = getJson;
function getJson(req, res) {
var html = jade.renderFile('views/test.jade', {some:'json'});
res.send({message: 'i sent json'});
}
getJson()
is available as a route in app.js.
My answer is quite easy:
Use Entity Framework for communication between C# and your SQL database. That will make parameterized SQL strings that isn't vulnerable to SQL injection.
As a bonus, it's very easy to work with as well.
Spring security is a filter based framework, it plants a WALL(HttpFireWall) before your application in terms of proxy filters or spring managed beans. Your request has to pass through multiple filters to reach your API.
WebAsyncManagerIntegrationFilter
Provides integration between the SecurityContext and Spring Web's WebAsyncManager.
SecurityContextPersistenceFilter
This filter will only execute once per request, Populates the SecurityContextHolder with information obtained from the configured SecurityContextRepository prior to the request and stores it back in the repository once the request has completed and clearing the context holder.
Request is checked for existing session. If new request, SecurityContext will be created else if request has session then existing security-context will be obtained from respository.
HeaderWriterFilter
Filter implementation to add headers to the current response.
LogoutFilter
If request url is /logout
(for default configuration) or if request url mathces RequestMatcher
configured in LogoutConfigurer
then
LogoutConfigurer
/
or logout success url configured or invokes logoutSuccessHandler configured.UsernamePasswordAuthenticationFilter
HTTP POST
) default /login
or matches .loginProcessingUrl()
configured in FormLoginConfigurer
then UsernamePasswordAuthenticationFilter
attempts authentication.usernameParameter(String)
, passwordParameter(String)
..loginPage()
overrides defaults Authentication
object(UsernamePasswordAuthenticationToken
or any implementation of Authentication
in case of your custom auth filter) is created. authenticationManager.authenticate(authToken)
will be invokedAuthenticationProvider
authenticate method tries all auth providers and checks any of the auth provider supports
authToken/authentication object, supporting auth provider will be used for authenticating. and returns Authentication object in case of successful authentication else throws AuthenticationException
.authenticationSuccessHandler
will be invoked which redirects to the target url configured(default is /
)SecurityContextHolderAwareRequestFilter
, if you are using it to install a Spring Security aware HttpServletRequestWrapper into your servlet container
AnonymousAuthenticationFilter
Detects if there is no Authentication object in the SecurityContextHolder, if no authentication object found, creates Authentication
object (AnonymousAuthenticationToken
) with granted authority ROLE_ANONYMOUS
. Here AnonymousAuthenticationToken
facilitates identifying un-authenticated users subsequent requests.
DEBUG - /app/admin/app-config at position 9 of 12 in additional filter chain; firing Filter: 'AnonymousAuthenticationFilter'
DEBUG - Populated SecurityContextHolder with anonymous token: 'org.springframework.security.authentication.AnonymousAuthenticationToken@aeef7b36: Principal: anonymousUser; Credentials: [PROTECTED]; Authenticated: true; Details: org.springframework.security.web.authentication.WebAuthenticationDetails@b364: RemoteIpAddress: 0:0:0:0:0:0:0:1; SessionId: null; Granted Authorities: ROLE_ANONYMOUS'
ExceptionTranslationFilter
, to catch any Spring Security exceptions so that either an HTTP error response can be returned or an appropriate AuthenticationEntryPoint can be launched
FilterSecurityInterceptor
There will be FilterSecurityInterceptor
which comes almost last in the filter chain which gets Authentication object from SecurityContext
and gets granted authorities list(roles granted) and it will make a decision whether to allow this request to reach the requested resource or not, decision is made by matching with the allowed AntMatchers
configured in HttpSecurityConfiguration
.
Consider the exceptions 401-UnAuthorized and 403-Forbidden. These decisions will be done at the last in the filter chain
Note: User Request flows not only in above mentioned filters, but there are others filters too not shown here.(ConcurrentSessionFilter
,RequestCacheAwareFilter
,SessionManagementFilter
...)
It will be different when you use your custom auth filter instead of UsernamePasswordAuthenticationFilter
.
It will be different if you configure JWT auth filter and omit .formLogin() i.e, UsernamePasswordAuthenticationFilter
it will become entirely different case.
From Documentation ordering of filters is given as
- ChannelProcessingFilter
- ConcurrentSessionFilter
- SecurityContextPersistenceFilter
- LogoutFilter
- X509AuthenticationFilter
- AbstractPreAuthenticatedProcessingFilter
- CasAuthenticationFilter
- UsernamePasswordAuthenticationFilter
- ConcurrentSessionFilter
- OpenIDAuthenticationFilter
- DefaultLoginPageGeneratingFilter
- DefaultLogoutPageGeneratingFilter
- ConcurrentSessionFilter
- DigestAuthenticationFilter
- BearerTokenAuthenticationFilter
- BasicAuthenticationFilter
- RequestCacheAwareFilter
- SecurityContextHolderAwareRequestFilter
- JaasApiIntegrationFilter
- RememberMeAuthenticationFilter
- AnonymousAuthenticationFilter
- SessionManagementFilter
- ExceptionTranslationFilter
- FilterSecurityInterceptor
- SwitchUserFilter
You can also refer
most common way to authenticate a modern web app?
difference between authentication and authorization in context of Spring Security?
Conceptually there are the two "domains" classes and interfaces. Inside these domains you are always extending, only a class implements an interface, which is kind of "crossing the border". So basically "extends" for interfaces mirrors the behavior for classes. At least I think this is the logic behind. It seems than not everybody agrees with this kind of logic (I find it a little bit contrived myself), and in fact there is no technical reason to have two different keywords at all.
The easiest way can be inline style on modal-dialog
div :
<div class="modal" id="myModal">
<div class="modal-dialog" style="width:1250px;">
<div class="modal-content">
...
</div>
</div>
</div>
I have a similar problem with Error:Execution failed for task ':app:mergeDebugResources
. And at last I found the reason is the pictures resource error which use the incorrect ".9.png".
use the val() method:
$(document).ready(function () {
var j = $("textarea");
if (j.val().length > 0) {
alert(j.val());
}
});
For me, this problem was a little different and super easy to check and solve.
You must ensure BOTH of your tables are InnoDB. If one of the tables, namely the reference table is a MyISAM, the constraint will fail.
SHOW TABLE STATUS WHERE Name = 't1';
ALTER TABLE t1 ENGINE=InnoDB;
The most straightforward way is to use a for
loop to add elements to a new List
:
String abc = "abc";
List<Character> charList = new ArrayList<Character>();
for (char c : abc.toCharArray()) {
charList.add(c);
}
Similarly, for a Set
:
String abc = "abc";
Set<Character> charSet = new HashSet<Character>();
for (char c : abc.toCharArray()) {
charSet.add(c);
}
Use setInterval
instead of setTimeout
. Though in this case either will be fine but setTimeout
inherently triggers only once setInterval
continues indefinitely.
<script language="javascript">
setInterval(function(){
window.location.reload(1);
}, 30000);
</script>
To further explain Sheena's answer, I needed to have setup-tools installed as a dependency of another tool e.g. more-itertools.
Click the Clone or download button and choose your method. I placed these into a dev/py/libs
directory in my user home directory. It does not matter where they are saved, because they will not be installed there.
You will need to run the following inside the setup-tools directory.
python bootstrap.py
python setup.py install
Now you can navigate to the more-itertools direcotry and install it as normal.
cd ...
) into the directory containing setup.py
python setup.py install
Try the __length_hint__() method from any iterator object:
iter(...).__length_hint__() > 0
To disable the "Show Entries" label, use "bInfo", example: "bFilter" is the search component, but are active by default.
$(document).ready( function () {
$('#example').dataTable( {
"bInfo": false
} );
} );
Enable or disable the table information display. This shows information about the data that is currently visible on the page, including information about filtered data if that action is being performed.
Just open file by nano /file_name
Once done, press CTRL+O and then Enter to save. Then press CTRL+X to return.
Here CTRL+O : is CTRL and O for Orange Not 0 Zero
another way to do this is by going through the intermediate table. I'd express this within the Django ORM like this:
UserZone = User.zones.through
# for a single zone
users_in_zone = User.objects.filter(
id__in=UserZone.objects.filter(zone=zone1).values('user'))
# for multiple zones
users_in_zones = User.objects.filter(
id__in=UserZone.objects.filter(zone__in=[zone1, zone2, zone3]).values('user'))
it would be nice if it didn't need the .values('user')
specified, but Django (version 3.0.7) seems to need it.
the above code will end up generating SQL that looks something like:
SELECT * FROM users WHERE id IN (SELECT user_id FROM userzones WHERE zone_id IN (1,2,3))
which is nice because it doesn't have any intermediate joins that could cause duplicate users to be returned
select unique is not valid syntax for what you are trying to do
you want to use either select distinct or select distinctrow
And actually, you don't even need distinct/distinctrow in what you are trying to do. You can eliminate duplicates by choosing the appropriate union statement parameters.
the below query by itself will only provide distinct values
select col from table1
union
select col from table2
if you did want duplicates you would have to do
select col from table1
union all
select col from table2
Encode converts a unicode object in to a string object. I think you are trying to encode a string object. first convert your result into unicode object and then encode that unicode object into 'utf-8'. for example
result = yourFunction()
result.decode().encode('utf-8')
Have look at dom4j or jdom. Both libraries allow creating a Document and allow printing the document as xml. Both are widly used, pretty easy to use and you'll find a lot of examples and snippets.
You can use Environment.Exit(0)
and Application.Exit
.
Environment.Exit()
: terminates this process and gives the underlying operating system the specified exit code.
Particular example: use a BindingResult object as an argument for a validate method of a Validator inside a Controller.
Then, you can check this object looking for validation errors:
validator.validate(modelObject, bindingResult);
if (bindingResult.hasErrors()) {
// do something
}
The accepted answer by Jesper is correct but now outdated. The java.util.Date and .Calendar classes are notoriously troublesome. Avoid them.
Instead use the java.time framework, built into Java 8 and later, back-ported to Java 6 & 7 and further adapted to Android.
If you truly do not care about time-of-day and time zones, use LocalDate
in the java.time framework ().
LocalDate localDate = LocalDate.of( 2014 , 5 , 6 );
A time zone is crucial in determining a date. For any given moment, the date varies around the globe by zone. For example, a few minutes after midnight in Paris France is a new day while still “yesterday” in Montréal Québec.
If no time zone is specified, the JVM implicitly applies its current default time zone. That default may change at any moment during runtime(!), so your results may vary. Better to specify your desired/expected time zone explicitly as an argument. If you want to use the JVM’s current default time zone, make your intention clear by calling ZoneId.systemDefault()
. If critical, confirm the zone with your user.
Specify a proper time zone name in the format of Continent/Region
, such as America/Montreal
, Africa/Casablanca
, or Pacific/Auckland
. Never use the 2-4 letter abbreviation such as EST
or IST
as they are not true time zones, not standardized, and not even unique(!).
ZoneId z = ZoneId.of( "America/Montreal" ) ;
LocalDate today = LocalDate.now( z ) ;
If you want to use the JVM’s current default time zone, ask for it and pass as an argument. If omitted, the code becomes ambiguous to read in that we do not know for certain if you intended to use the default or if you, like so many programmers, were unaware of the issue.
ZoneId z = ZoneId.systemDefault() ; // Get JVM’s current default time zone.
LocalDate today = LocalDate.now( z ) ;
If you care about specific moments, specific points on the timeline, do not use LocalDate
. If you care about the date as seen through the wall-clock time used by the people of a certain region, do not use LocalDate
.
Be aware that if you have any chance of needing to deal with other time zones or UTC, this is the wrong way to go. Naïve programmers tend to think they do not need time zones when in fact they do.
Call toString
to generate a string in standard ISO 8601 format.
String output = localDate.toString();
2014-05-06
For other formats, search Stack Overflow for DateTimeFormatter
class.
Though now supplanted by java.time, you can use the similar LocalDate
class in the Joda-Time library (the inspiration for java.time).
LocalDate localDate = new LocalDate( 2014, 5, 6 );
It's usually in your MySQL installation folder like in C:\Program Files\MySQL\MySQL Server 5.5\my.ini
or C:\xampp\mysql\bin
If it's not there, it's highly possible that you have none, and that MySQL is just loading default values.
You might have to enable hidden Files and Folders to see it. Go to Folder Options: in any folder, go to the top horizontal main text menu >> Tools >> Folder Options. Enable 'View Hidden Files and Folders', and 'View Protected System Files', save & exit
You can parse the URL of the current page to obtain the GET parameters. The URL can be found by using location.href
.
-DBL_MAX
in ANSI C, which is defined in float.h.
Use lt pseudo selector:
$("a:lt(n)")
This matches the elements before the nth one (the nth element excluded). Numbering starts from 0.
you can use "Line1<br>Line2"
The method len() returns the number of elements in the list.
Syntax:
len(myArray)
Eg:
myArray = [1, 2, 3]
len(myArray)
Output:
3
I'm particularly fond of this date picker built for Mootools: http://electricprism.com/aeron/calendar/
It's lovely right out of the box.
Here is a one line Pythonic version:
import os
dir = 'given_directory_name'
filenames = [os.path.join(os.path.dirname(os.path.abspath(__file__)),dir,i) for i in os.listdir(dir)]
This code lists the full path of all files and directories in the given directory name.
If the image is too large and you can't save&load it to the storage, you should consider just using a global static reference to the bitmap (inside the receiving activity), which will be reset to null on onDestory, only if "isChangingConfigurations" returns true.
Since you are making a web app why do you need links?
Swap your anchors to buttons!
<button ng-click="do()"></button>
The reason you are not receiving the event is because the absolutely positioned element is not a child of the element you are wanting to "click" (blue div). The cleanest way I can think of is to put the absolute element as a child of the one you want clicked, but I'm assuming you can't do that or you wouldn't have posted this question here :)
Another option would be to register a click event handler for the absolute element and call the click handler for the blue div, causing them both to flash.
Due to the way events bubble up through the DOM I'm not sure there is a simpler answer for you, but I'm very curious if anyone else has any tricks I don't know about!
For those using Gradle (instead of Maven), referencing here:
The main class can also be configured explicitly using the task’s mainClassName property:
bootJar {
mainClassName = 'com.example.ExampleApplication'
}
Alternatively, the main class name can be configured project-wide using the mainClassName property of the Spring Boot DSL:
springBoot {
mainClassName = 'com.example.ExampleApplication'
}
By default mongodb has no enabled access control, so there is no default user or password.
To enable access control, use either the command line option --auth
or security.authorization configuration file setting.
You can use the following procedure or refer to Enabling Auth in the MongoDB docs.
Start MongoDB without access control.
mongod --port 27017 --dbpath /data/db1
Connect to the instance.
mongo --port 27017
Create the user administrator.
use admin
db.createUser(
{
user: "myUserAdmin",
pwd: "abc123",
roles: [ { role: "userAdminAnyDatabase", db: "admin" } ]
}
)
Re-start the MongoDB instance with access control.
mongod --auth --port 27017 --dbpath /data/db1
Authenticate as the user administrator.
mongo --port 27017 -u "myUserAdmin" -p "abc123" \
--authenticationDatabase "admin"
The main difference between a session and a cookie is that session data is stored on the server, whereas cookies store data in the visitor’s browser.
Sessions are more secure than cookies as it is stored in server. Cookie can be turned off from browser.
Data stored in cookie can be stored for months or years, depending on the life span of the cookie. But the data in the session is lost when the web browser is closed.
This is caused if you use the "Use host GPU" setting of the emulator and it will disappear after you uncheck this option. If you still need "Use host GPU", you can just filter out the errors by customizing the Logcat Filter. Enter ^(?!eglCodecCommon)
into the "by Log Tag (regex)" field in order to strip out the unwanted lines from the Logcat output.
Check for exported NFS file systems with exportfs -v. If found, remove with exportfs -d share:/directory. These don't show up in the fuser/lsof listing, and can prevent umount from succeeding.
Yes, you're looking for the ReDim
statement, which dynamically allocates the required amount of space in the array.
The following statement
Dim MyArray()
declares an array without dimensions, so the compiler doesn't know how big it is and can't store anything inside of it.
But you can use the ReDim
statement to resize the array:
ReDim MyArray(0 To 3)
And if you need to resize the array while preserving its contents, you can use the Preserve
keyword along with the ReDim
statement:
ReDim Preserve MyArray(0 To 3)
But do note that both ReDim
and particularly ReDim Preserve
have a heavy performance cost. Try to avoid doing this over and over in a loop if at all possible; your users will thank you.
However, in the simple example shown in your question (if it's not just a throwaway sample), you don't need ReDim
at all. Just declare the array with explicit dimensions:
Dim MyArray(0 To 3)
Use deepgrep and deepfind. On debian-based systems you can install them by:
sudo apt-get install strigi-utils
Both commands search for nested archives as well. In your case the command would look like:
find . -name "*.jar" | xargs -I {} deepfind {} | grep Hello.class
colon is using in for-each loop, Try this example,
import java.util.*;
class ForEachLoop
{
public static void main(String args[])
{`enter code here`
Integer[] iray={1,2,3,4,5};
String[] sray={"ENRIQUE IGLESIAS"};
printME(iray);
printME(sray);
}
public static void printME(Integer[] i)
{
for(Integer x:i)
{
System.out.println(x);
}
}
public static void printME(String[] i)
{
for(String x:i)
{
System.out.println(x);
}
}
}
Probably the best way is to use Guava
List<String> list = new ArrayList<String>();
list.add("How are you");
list.add("How you doing");
list.add("Joe");
list.add("Mike");
Collection<String> filtered = Collections2.filter(list,
Predicates.containsPattern("How"));
print(filtered);
prints
How are you
How you doing
In case you want to get the filtered collection as a list, you can use this (also from Guava):
List<String> filteredList = Lists.newArrayList(Collections2.filter(
list, Predicates.containsPattern("How")));
as a noob using Python3 ,I find it might be an import error instead of a Django error
wrong:
from someModule import someClass
right:
from .someModule import someClass
this happens a few days ago but I really can't reproduce it...I think only people new to Django may encounter this.here's what I remember:
try to register a model in admin.py:
from django.contrib import admin
from user import User
admin.site.register(User)
try to run server, error looks like this
some lines...
File "/path/to/admin.py" ,line 6
tell you there is an import error
some lines...
Model class django.contrib.contenttypes.models.ContentType doesn't declare an explicit app_label
change user
to .user
,problem solved
To drop rows with indices 1, 2, 4 you can use:
df[~df.index.isin([1, 2, 4])]
The tilde operator ~
negates the result of the method isin
. Another option is to drop indices:
df.loc[df.index.drop([1, 2, 4])]
I don't think desc
takes an na.rm
argument... I'm actually surprised it doesn't throw an error when you give it one. If you just want to remove NA
s, use na.omit
(base) or tidyr::drop_na
:
outcome.df %>%
na.omit() %>%
group_by(Hospital, State) %>%
arrange(desc(HeartAttackDeath)) %>%
head()
library(tidyr)
outcome.df %>%
drop_na() %>%
group_by(Hospital, State) %>%
arrange(desc(HeartAttackDeath)) %>%
head()
If you only want to remove NA
s from the HeartAttackDeath column, filter with is.na
, or use tidyr::drop_na
:
outcome.df %>%
filter(!is.na(HeartAttackDeath)) %>%
group_by(Hospital, State) %>%
arrange(desc(HeartAttackDeath)) %>%
head()
outcome.df %>%
drop_na(HeartAttackDeath) %>%
group_by(Hospital, State) %>%
arrange(desc(HeartAttackDeath)) %>%
head()
As pointed out at the dupe, complete.cases
can also be used, but it's a bit trickier to put in a chain because it takes a data frame as an argument but returns an index vector. So you could use it like this:
outcome.df %>%
filter(complete.cases(.)) %>%
group_by(Hospital, State) %>%
arrange(desc(HeartAttackDeath)) %>%
head()
Above solution does not work for me , I have tried following and it is working in all browsers.
simply made a fake ajax call, it will make a entry into referer header.
var request;
if (window.XMLHttpRequest) { // Mozilla, Safari, ...
request = new XMLHttpRequest();
} else if (window.ActiveXObject) { // IE
try {
request = new ActiveXObject('Msxml2.XMLHTTP');
} catch (e) {
try {
request = new ActiveXObject('Microsoft.XMLHTTP');
} catch (e) {}
}
}
request.open("GET", url, true);
request.send();
select to_char(tran_datetime,'HH24') from test;
TO_CHAR(tran_datetime,'HH24')
------------------
16
switch($someString.ToLower())
{
{($_ -eq "y") -or ($_ -eq "yes")} { "You entered Yes." }
default { "You entered No." }
}
pls refer this https://stackoverflow.com/a/1972404/951045
TelephonyManager mngr = (TelephonyManager)getSystemService(Context.TELEPHONY_SERVICE);
mngr.getDeviceId();
add READ_PHONE_STATE
permission to AndroidManifest.xml
I have created a small library of category methods, called Linq to ObjectiveC, that makes this sort of thing more easy. Using the sort method with a key selector, you can sort by birthDate
as follows:
NSArray* sortedByBirthDate = [input sort:^id(id person) {
return [person birthDate];
}]
public class chkPalindrome{
public static String isPalindrome(String pal){
if(pal.length() == 1){
return pal;
}
else{
String tmp= "";
tmp = tmp + pal.charAt(pal.length()-1)+isPalindrome(pal.substring(0,pal.length()-1));
return tmp;
}
}
public static void main(String []args){
chkPalindrome hwObj = new chkPalindrome();
String palind = "MADAM";
String retVal= hwObj.isPalindrome(palind);
if(retVal.equals(palind))
System.out.println(palind+" is Palindrome");
else
System.out.println(palind+" is Not Palindrome");
}
}
to make the string upper case -- just simply type
s.upper()
simple and easy! you can do the same to make it lower too
s.lower()
etc.
List<String> list = new ArrayList<>();
list.add("Hello");
list.add("Hello");
list.add("World");
Map<String, List<String>> collect = list.stream()
.collect(Collectors.groupingBy(o -> o));
collect.entrySet()
.forEach(e -> System.out.println(e.getKey() + " - " + e.getValue().size()));
With your code, the vue.js
is trying to access the moment()
method from its scope.
Hence you should use a method like this:
methods: {
moment: function () {
return moment();
}
},
If you want to pass a date to the moment.js
, I suggest to use filters:
filters: {
moment: function (date) {
return moment(date).format('MMMM Do YYYY, h:mm:ss a');
}
}
<span>{{ date | moment }}</span>
You can use this function to get current local time. if you want gmt then use the gmtime
function instead of localtime
. cheers
time_t my_time;
struct tm * timeinfo;
time (&my_time);
timeinfo = localtime (&my_time);
CCLog("year->%d",timeinfo->tm_year+1900);
CCLog("month->%d",timeinfo->tm_mon+1);
CCLog("date->%d",timeinfo->tm_mday);
CCLog("hour->%d",timeinfo->tm_hour);
CCLog("minutes->%d",timeinfo->tm_min);
CCLog("seconds->%d",timeinfo->tm_sec);
Since you know how many pixels are occupied by the previous content, you can use the calc()
function:
height: calc(100% - 50px);
If you use Tomcat, add '-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true' in VM properties.
https://tomcat.apache.org/tomcat-7.0-doc/config/systemprops.html#Security
You could try this:
string input = "lala.bla";
output = input.Split('.').Last();
I would do it the following way:
>>> x = np.array([[1,0,0], [0,2,0], [1,1,0]])
>>> x
array([[1, 0, 0],
[0, 2, 0],
[1, 1, 0]])
>>> np.nonzero(x)
(array([0, 1, 2, 2]), array([0, 1, 0, 1]))
# if you want it in coordinates
>>> x[np.nonzero(x)]
array([1, 2, 1, 1])
>>> np.transpose(np.nonzero(x))
array([[0, 0],
[1, 1],
[2, 0],
[2, 1])
Shutdown Hooks are unstarted threads that are registered with Runtime.addShutdownHook().JVM does not give any guarantee on the order in which shutdown hooks are started.For more info refer http://techno-terminal.blogspot.in/2015/08/shutdown-hooks.html
It's an interesting question, because it shows that there are a lot of different approaches to achieve the same result. Below I show three different implementations.
Default methods in Collection Framework: Java 8 added some methods to the collections classes, that are not directly related to the Stream API. Using these methods, you can significantly simplify the implementation of the non-stream implementation:
Collection<DataSet> convert(List<MultiDataPoint> multiDataPoints) {
Map<String, DataSet> result = new HashMap<>();
multiDataPoints.forEach(pt ->
pt.keyToData.forEach((key, value) ->
result.computeIfAbsent(
key, k -> new DataSet(k, new ArrayList<>()))
.dataPoints.add(new DataPoint(pt.timestamp, value))));
return result.values();
}
Stream API with flatten and intermediate data structure: The following implementation is almost identical to the solution provided by Stuart Marks. In contrast to his solution, the following implementation uses an anonymous inner class as intermediate data structure.
Collection<DataSet> convert(List<MultiDataPoint> multiDataPoints) {
return multiDataPoints.stream()
.flatMap(mdp -> mdp.keyToData.entrySet().stream().map(e ->
new Object() {
String key = e.getKey();
DataPoint dataPoint = new DataPoint(mdp.timestamp, e.getValue());
}))
.collect(
collectingAndThen(
groupingBy(t -> t.key, mapping(t -> t.dataPoint, toList())),
m -> m.entrySet().stream().map(e -> new DataSet(e.getKey(), e.getValue())).collect(toList())));
}
Stream API with map merging: Instead of flattening the original data structures, you can also create a Map for each MultiDataPoint, and then merge all maps into a single map with a reduce operation. The code is a bit simpler than the above solution:
Collection<DataSet> convert(List<MultiDataPoint> multiDataPoints) {
return multiDataPoints.stream()
.map(mdp -> mdp.keyToData.entrySet().stream()
.collect(toMap(e -> e.getKey(), e -> asList(new DataPoint(mdp.timestamp, e.getValue())))))
.reduce(new HashMap<>(), mapMerger())
.entrySet().stream()
.map(e -> new DataSet(e.getKey(), e.getValue()))
.collect(toList());
}
You can find an implementation of the map merger within the Collectors class. Unfortunately, it is a bit tricky to access it from the outside. Following is an alternative implementation of the map merger:
<K, V> BinaryOperator<Map<K, List<V>>> mapMerger() {
return (lhs, rhs) -> {
Map<K, List<V>> result = new HashMap<>();
lhs.forEach((key, value) -> result.computeIfAbsent(key, k -> new ArrayList<>()).addAll(value));
rhs.forEach((key, value) -> result.computeIfAbsent(key, k -> new ArrayList<>()).addAll(value));
return result;
};
}
SELECT *
FROM ...
WHERE EXISTS(SELECT 1
FROM sys.columns c
WHERE c.[object_id] = OBJECT_ID('dbo.Tags')
AND c.name = 'ModifiedByUser'
)
~/Library/Developer/Xcode/DerivedData/{app name}/Build/Products/Debug-iphonesimulator/
I found this occurred in chrome when I did two ajax queries in the jquery 'on load' handler,
i.e. like $(function() { $.ajax() ... $.ajax() ... });
I avoided it using:
setTimeout(function_to_do_2nd_ajax_request, 1);
it's presumably a chrome and/or jquery bug
There is also the use of the -> operator for copying. For Example:
-(id)copyWithZone:(NSZone*)zone
{
MYClass* copy = [MYClass new];
copy->_property1 = self->_property1;
...
copy->_propertyN = self->_propertyN;
return copy;
}
The reasoning here is the resulting copied object should reflect the state of the original object. The "." operator could introduce side effects as this one calls getters which in turn may contain logic.
git rev-parse --show-toplevel
could be enough if executed within a git repo.
From git rev-parse
man page:
--show-toplevel
Show the absolute path of the top-level directory.
For older versions (before 1.7.x), the other options are listed in "Is there a way to get the git root directory in one command?":
git rev-parse --git-dir
That would give the path of the .git
directory.
The OP mentions:
git rev-parse --show-prefix
which returns the local path under the git repo root. (empty if you are at the git repo root)
Note: for simply checking if one is in a git repo, I find the following command quite expressive:
git rev-parse --is-inside-work-tree
And yes, if you need to check if you are in a .git
git-dir folder:
git rev-parse --is-inside-git-dir
its simple let us assume you have made an state full class by extending Component which contains following
class DisableButton extends Components
{
constructor()
{
super();
// now set the initial state of button enable and disable to be false
this.state = {isEnable: false }
}
// this function checks the length and make button to be enable by updating the state
handleButtonEnable(event)
{
const value = this.target.value;
if(value.length > 0 )
{
// set the state of isEnable to be true to make the button to be enable
this.setState({isEnable : true})
}
}
// in render you having button and input
render()
{
return (
<div>
<input
placeholder={"ANY_PLACEHOLDER"}
onChange={this.handleChangePassword}
/>
<button
onClick ={this.someFunction}
disabled = {this.state.isEnable}
/>
<div/>
)
}
}
You can use DateFormat
(java.text.*) to parse the date:
DateFormat df = new SimpleDateFormat("EEE MMM dd kk:mm:ss z yyyy", Locale.ENGLISH);
Date d = df.parse("Mon May 27 11:46:15 IST 2013")
You will have to change the locale to match your own (with this you will get 10:46:15). Then you can use the same code you have to convert it to a timestamp.
In .NET Core I played with all upper answers - but without any success.
I made changes a lot in DB structure and every time added new migration attempting to update-database
, but received the same error.
Then I started to remove-migration
one by one until Package Manager Console threw me exception:
The migration '20170827183131_***' has already been applied to the database
After that, I added new migration (add-migration
) and update-database
successfully
So my suggestion would be: clear out all your temp migrations, until your current DB state.
I like the aliases too ... however, I've had issues with MySQLCOM for start ... it fails silently ... My workaround is akin to the others ... ~/.bash_aliases
alias mysqlstart='sudo /usr/local/mysql/support-files/mysql.server start'
alias mysqlstop='sudo /usr/local/mysql/support-files/mysql.server stop'
In android gradle 0.4.0 you can just do:
println System.env.HOME
classpath com.android.tools.build:gradle-experimental:0.4.0
You can provide padding to an input like this:
HTML:
<input type=text id=firstname />
CSS:
input {
width: 250px;
padding: 5px;
}
however I would also add:
input {
width: 250px;
padding: 5px;
-webkit-box-sizing: border-box; /* Safari/Chrome, other WebKit */
-moz-box-sizing: border-box; /* Firefox, other Gecko */
box-sizing: border-box; /* Opera/IE 8+ */
}
Box sizing makes the input width stay at 250px rather than increase to 260px due to the padding.
You can set the caret position using TextBox.CaretIndex. If the only thing you need is to set the cursor at the end, you can simply pass the string's length, eg:
txtBox.CaretIndex=txtBox.Text.Length;
You need to set the caret index at the length, not length-1, because this would put the caret before the last character.
The DBA views are restricted. So you won't be able to query them unless you're connected as a DBA or similarly privileged user.
The ALL views show you the information you're allowed to see. Normally that would be jobs you've submitted, unless you have additional privileges.
The privileges you need are defined in the Admin Guide. Find out more.
So, either you need a DBA account or you need to chat with your DBA team about getting access to the information you need.
If you use the CMake GUI then swap to the advanced view and then the option is called CMAKE_VERBOSE_MAKEFILE.
The problem is the JSON - this cannot, by default, be deserialized into a Collection
because it's not actually a JSON Array - that would look like this:
[
{
"name": "Test order1",
"detail": "ahk ks"
},
{
"name": "Test order2",
"detail": "Fisteku"
}
]
Since you're not controlling the exact process of deserialization (RestEasy does) - a first option would be to simply inject the JSON as a String
and then take control of the deserialization process:
Collection<COrder> readValues = new ObjectMapper().readValue(
jsonAsString, new TypeReference<Collection<COrder>>() { }
);
You would loose a bit of the convenience of not having to do that yourself, but you would easily sort out the problem.
Another option - if you cannot change the JSON - would be to construct a wrapper to fit the structure of your JSON input - and use that instead of Collection<COrder>
.
Hope this helps.
SELECT StoreId
FROM StoreClients
WHERE StoreId NOT IN (
SELECT StoreId
FROM StoreClients
Where ClientId=5
)
To answer to your second question. You can just hit the IP address of the machine that your flask app is running, e.g. 192.168.1.100
in a browser on different machine on the same network and you are there. Though, you will not be able to access it if you are on a different network. Firewalls or VLans can cause you problems with reaching your application.
If that computer has a public IP, then you can hit that IP from anywhere on the planet and you will be able to reach the app. Usually this might impose some configuration, since most of the public servers are behind some sort of router or firewall.
No, this is, as you say "rubbish code". If it works as should, it is because browsers try to "read the writer's mind" - in other words, they have algorithms to try to make sense of "rubbish code", guess at the probable intent and internally change it into something that actually makes sense.
In other words, your code only works by accident, and probably not in all browsers.
Is this what you're trying to do?
<a href="#" onClick="alert('Hello World!')"><img title="The Link" /></a>
Slonik is an alternative to answers proposed by Kuberchaun and Vitaly.
Slonik implements safe connection handling; you create a connection pool and connection opening/handling is handled for you.
import {
createPool,
sql
} from 'slonik';
const pool = createPool('postgres://user:password@host:port/database');
return pool.connect((connection) => {
// You are now connected to the database.
return connection.query(sql`SELECT foo()`);
})
.then(() => {
// You are no longer connected to the database.
});
postgres://user:password@host:port/database
is your connection string (or more canonically a connection URI or DSN).
The benefit of this approach is that your script ensures that you never accidentally leave hanging connections.
Other benefits for using Slonik include:
Old question, but still coming up on Google. In the current version of Express (3.4.0), you can alter res.statusCode before calling next(err):
res.statusCode = 404;
next(new Error('File not found'));
Sendmail wasn't working for me so I used msmtp 1.6.2 w32 and most just followed the instructions at DeveloperSide. Here is a quick rundown of the setup for posterity:
Enabled IMAP access under your Gmail account (the one msmtp is sending emails from)
Enable access for less secure apps. Log into your google account and go here
Edit php.ini
, find and change each setting below to reflect the following:
; These are commented out by prefixing a semicolon
;SMTP = localhost
;smtp_port = 25
; Set these paths to where you put your msmtp files.
; I used backslashes in php.ini and it works fine.
; The example in the devside guide uses forwardslashes.
sendmail_path = "C:\wamp64\msmtp\msmtp.exe -d -C C:\wamp64\msmtp\msmtprc.ini -t --read-envelope-from"
mail.log = "C:\wamp64\msmtp\maillog.txt"
Create and edit the file msmtprc.ini
in the same directory as your msmtp.exe
file as follows, replacing it with your own email and password:
# Default values for all accounts
defaults
tls_certcheck off
# I used forward slashes here and it works.
logfile C:/wamp64/msmtp/msmtplog.txt
account Gmail
host smtp.gmail.com
port 587
auth on
tls on
from [email protected]
user [email protected]
password ReplaceWithYourPassword
account default : gmail
The last update for "windows git" did move the git.exe file from the /bin folder to the /cmd folder. So, to use git with IDEs such as webStorm or Android Studio you can use the path :
C:\Users\<user>\AppData\Local\GitHub\PortableGit_<..numbers..>\cmd\git.exe
But if you want to have linux-like commands such as git, ssh, ls, cp under windows powerShell or cmd add to your windows PATH variables :
C:\Users\<user>\AppData\Local\GitHub\PortableGit_<...numbers...>\usr\bin
change <user> and <...numbers...> to your values and reboot!
Also, you will have to update this everytime git updates since it might change the portable folder name. If folder structure changes I will update this post.
Thx @dennisschagt for the comment above! ;)
It seems to have to do with context wrapping. Most classes derived from Context
are actually a ContextWrapper
, which essentially delegates to another context, possibly with changes by the wrapper.
The context is a general abstraction that supports mocking and proxying. Since many contexts are bound to a limited-lifetime object such as an Activity
, there needs to be a way to get a longer-lived context, for purposes such as registering for future notifications. That is achieved by Context.getApplicationContext()
. A logical implementation is to return the global Application
object, but nothing prevents a context implementation from returning a wrapper or proxy with a suitable lifetime instead.
Activities and services are more specifically associated with an Application
object. The usefulness of this, I believe, is that you can create and register in the manifest a custom class derived from Application
and be certain that Activity.getApplication()
or Service.getApplication()
will return that specific object of that specific type, which you can cast to your derived Application
class and use for whatever custom purpose.
In other words, getApplication()
is guaranteed to return an Application
object, while getApplicationContext()
is free to return a proxy instead.
With Cordova 5.0 and greater the plugin InAppBrowser is renamed in the Cordova plugin registry, so you should install it using
cordova plugin add cordova-plugin-inappbrowser --save
Then use
<a href="#" onclick="window.open('http://www.kidzout.com', '_system');">www.kidzout.com</a>
_x000D_
You can call the method getBoundingClientRect()
on a reference to the element. Then you can examine the top
, left
, right
and/or bottom
properties...
var offsets = document.getElementById('11a').getBoundingClientRect();
var top = offsets.top;
var left = offsets.left;
If using jQuery, you can use the more succinct code...
var offsets = $('#11a').offset();
var top = offsets.top;
var left = offsets.left;
note - Lepl is no longer maintained or supported.
RFC 3696 defines "best practices" for URL validation - http://www.faqs.org/rfcs/rfc3696.html
The latest release of Lepl (a Python parser library) includes an implementation of RFC 3696. You would use it something like:
from lepl.apps.rfc3696 import Email, HttpUrl
# compile the validators (do once at start of program)
valid_email = Email()
valid_http_url = HttpUrl()
# use the validators (as often as you like)
if valid_email(some_email):
# email is ok
else:
# email is bad
if valid_http_url(some_url):
# url is ok
else:
# url is bad
Although the validators are defined in Lepl, which is a recursive descent parser, they are largely compiled internally to regular expressions. That combines the best of both worlds - a (relatively) easy to read definition that can be checked against RFC 3696 and an efficient implementation. There's a post on my blog showing how this simplifies the parser - http://www.acooke.org/cute/LEPLOptimi0.html
Lepl is available at http://www.acooke.org/lepl and the RFC 3696 module is documented at http://www.acooke.org/lepl/rfc3696.html
This is completely new in this release, so may contain bugs. Please contact me if you have any problems and I will fix them ASAP. Thanks.
If you intend to change A, B, C.... you see high above the columns, you can not. You can hide A, B, C...: Button Office(top left) Excel Options(bottom) Advanced(left) Right looking: Display options fot this worksheet: Select the worksheet(eg. Sheet3) Uncheck: Show column and row headers Ok
If there are multiple launchers in a one package above code has a problem. Eg: on LG Optimus Facebook for LG, MySpace for LG, Twitter for LG contains in a one package name SNS and if you use above SNS will repeat. After hours of research I came with below code. Seems to work well.
private List<String> getInstalledComponentList()
throws NameNotFoundException {
final Intent mainIntent = new Intent(Intent.ACTION_MAIN, null);
mainIntent.addCategory(Intent.CATEGORY_LAUNCHER);
List<ResolveInfo> ril = getPackageManager().queryIntentActivities(mainIntent, 0);
List<String> componentList = new ArrayList<String>();
String name = null;
for (ResolveInfo ri : ril) {
if (ri.activityInfo != null) {
Resources res = getPackageManager().getResourcesForApplication(ri.activityInfo.applicationInfo);
if (ri.activityInfo.labelRes != 0) {
name = res.getString(ri.activityInfo.labelRes);
} else {
name = ri.activityInfo.applicationInfo.loadLabel(
getPackageManager()).toString();
}
componentList.add(name);
}
}
return componentList;
}
If I want to exit a for-to loop, I just set the index beyond the limit:
For i = 1 To max
some code
if this(i) = 25 Then i = max + 1
some more code...
Next`
Poppa.
I got the same error and the issue was that I was on VPN and I didn't realize it. After disconnecting from the VPN and reconnecting to my WIFI network, the problem was resolved.
There are a few projects out there that make the interaction between the client and the server easier as far as it concerns saving an entire object graph.
Here are two you'd want to look at:
Both the projects above take recognize the disconnected entities when it's returned to the server, detect and save the changes, and return to the client affected data.
This is easier and gives purpose to the never used unordered/ordered list tags.
In your CSS add:
li{float: left;} //Sets float left property globally for all li tags.
Then add in your HTML:
<ul>
<li>1</li>
<li>2</li>
<li>3</li>
</ul>
Now watch it all line up perfectly! No more arguing over tables vs divs!
jQuery :
$("#data td").toggle(function(){
$(this).css('background-color','blue')
},function(){
$(this).css('background-color','ur_default_color')
});
One thing to note that you guys are over-complicating the problem just like a lot of other posts! All you need to do is create drawable selectors with whatever backgrounds you need and set them to actual items. I just spend two hours trying your solutions (all suggested on this page) and none of them worked. Not to mention that there are tons of errors that essentially slow your performance in those try/catch blocks you have.
Anyways here is a menu xml file:
<?xml version="1.0" encoding="utf-8"?>
<menu xmlns:android="http://schemas.android.com/apk/res/android">
<item android:id="@+id/m1"
android:icon="@drawable/item1_selector"
/>
<item android:id="@+id/m2"
android:icon="@drawable/item2_selector"
/>
</menu>
Now in your item1_selector:
<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
<item android:state_pressed="true" android:drawable="@drawable/item_highlighted" />
<item android:state_selected="true" android:drawable="@drawable/item_highlighted" />
<item android:state_focused="true" android:drawable="@drawable/item_nonhighlighted" />
<item android:drawable="@drawable/item_nonhighlighted" />
</selector>
Next time you decide to go to the supermarket through Canada try google maps!
Our Server environment : SQL2008 x64 SP2 Reporting Services on Windows Server 2008 x64,
Client PC environment: Windows XP SP2 with IE6 or higher, all users are login to Active Directory, users are not members of local Administrator or power user group.
Error: When a user printing a report getting an error as "Unable to load client print control"
Solution that work for us: replace following files in sql 2008 with SQL 2008 R2
Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin RSClientPrint-x86.cab RSClientPrint-x64.cab RSClientPrint-ia64.cab
Once you replace the files one server users wont get above error and they do not required local power user or admin right to download Active X. Recommending to add report server URL as a trusted site (add to Trusted sites) via Active Directory GP.
Here is the code
<input type="button" value="Back" onclick="window.history.back()" />
http://docs.oracle.com/javase/7/docs/api/javax/swing/JTable.html
You will find these methods in it:
getValueAt(int row, int column)
getSelectedRow()
getSelectedColumn()
Use a mix of these to achieve your result.
//As an HTTP redirect (back button will not work )
window.location.replace("http://www.google.com");
//like if you click on a link (it will be saved in the session history,
//so the back button will work as expected)
window.location.href = "http://www.google.com";
If I understand you correctly, you want to compose a multipart request manually from an HTTP/REST console. The multipart format is simple; a brief introduction can be found in the HTML 4.01 spec. You need to come up with a boundary, which is a string not found in the content, let’s say HereGoes
. You set request header Content-Type: multipart/form-data; boundary=HereGoes
. Then this should be a valid request body:
--HereGoes
Content-Disposition: form-data; name="myJsonString"
Content-Type: application/json
{"foo": "bar"}
--HereGoes
Content-Disposition: form-data; name="photo"
Content-Type: image/jpeg
Content-Transfer-Encoding: base64
<...JPEG content in base64...>
--HereGoes--
Same thing, Just start the table name with #
or ##
:
CREATE TABLE #TemporaryTable -- Local temporary table - starts with single #
(
Col1 int,
Col2 varchar(10)
....
);
CREATE TABLE ##GlobalTemporaryTable -- Global temporary table - note it starts with ##.
(
Col1 int,
Col2 varchar(10)
....
);
Temporary table names start with #
or ##
- The first is a local temporary table and the last is a global temporary table.
Here is one of many articles describing the differences between them.
What about using a POST request instead of a GET...? (Which you should anyway...)
Although you can gzip using a reverse proxy such as nginx, lighttpd or in varnish. It can be beneficial to have most http optimisations such as gzipping at the application level so that you can have a much granular approach on what asset's to gzip.
I have actually created my own gzip module for expressjs / connect called gzippo https://github.com/tomgco/gzippo although new it does do the job. Plus it uses node-compress instead of spawning the unix gzip command.
Kotlin allows for even simpler code than what's shown in other answers.
To get the new token whenever it's refreshed:
class MyFirebaseMessagingService: FirebaseMessagingService() {
override fun onNewToken(token: String?) {
Log.d("FMS_TOKEN", token)
}
...
}
To get the token from anywhere at runtime:
FirebaseInstanceId.getInstance().instanceId.addOnSuccessListener {
Log.d("FMS_TOKEN", it.token)
}
Performance issue is the first reason. When you see the kind of hyper optimized C++ code that are in the Quake engines ( http://www.codemaestro.com/reviews/9 ), you know they're not gonna waste their time with a virtual machine.
Sure there may be some .NET games (which ones ? I'm interested. Are there some really CPU/GPU-intensive ones ?), but I guess it's more because lot of people are experts in MS technologies and followed Microsoft when they launched their new technology.
Oh and cross-platform just isn't in the mind of video games companies. Linux is just around 1% of market, Mac OS a few % more. They definitely think it's not worth dumping Windows-only technologies and librairies such as DirectX.
The --no-ff
option is useful when you want to have a clear notion of your feature branch. So even if in the meantime no commits were made, FF is possible - you still want sometimes to have each commit in the mainline correspond to one feature. So you treat a feature branch with a bunch of commits as a single unit, and merge them as a single unit. It is clear from your history when you do feature branch merging with --no-ff
.
If you do not care about such thing - you could probably get away with FF whenever it is possible. Thus you will have more svn-like feeling of workflow.
For example, the author of this article thinks that --no-ff
option should be default and his reasoning is close to that I outlined above:
Consider the situation where a series of minor commits on the "feature" branch collectively make up one new feature: If you just do "git merge feature_branch" without --no-ff
, "it is impossible to see from the Git history which of the commit objects together have implemented a feature—you would have to manually read all the log messages. Reverting a whole feature (i.e. a group of commits), is a true headache [if --no-ff
is not used], whereas it is easily done if the --no-ff
flag was used [because it's just one commit]."
This is a very good question and sadly many developers don't ask enough questions about IIS/ASP.NET security in the context of being a web developer and setting up IIS. So here goes....
To cover the identities listed:
IIS_IUSRS:
This is analogous to the old IIS6 IIS_WPG
group. It's a built-in group with it's security configured such that any member of this group can act as an application pool identity.
IUSR:
This account is analogous to the old IUSR_<MACHINE_NAME>
local account that was the default anonymous user for IIS5 and IIS6 websites (i.e. the one configured via the Directory Security tab of a site's properties).
For more information about IIS_IUSRS
and IUSR
see:
DefaultAppPool:
If an application pool is configured to run using the Application Pool Identity feature then a "synthesised" account called IIS AppPool\<pool name>
will be created on the fly to used as the pool identity. In this case there will be a synthesised account called IIS AppPool\DefaultAppPool
created for the life time of the pool. If you delete the pool then this account will no longer exist. When applying permissions to files and folders these must be added using IIS AppPool\<pool name>
. You also won't see these pool accounts in your computers User Manager. See the following for more information:
ASP.NET v4.0:
-
This will be the Application Pool Identity for the ASP.NET v4.0 Application Pool. See DefaultAppPool
above.
NETWORK SERVICE:
-
The NETWORK SERVICE
account is a built-in identity introduced on Windows 2003. NETWORK SERVICE
is a low privileged account under which you can run your application pools and websites. A website running in a Windows 2003 pool can still impersonate the site's anonymous account (IUSR_ or whatever you configured as the anonymous identity).
In ASP.NET prior to Windows 2008 you could have ASP.NET execute requests under the Application Pool account (usually NETWORK SERVICE
). Alternatively you could configure ASP.NET to impersonate the site's anonymous account via the <identity impersonate="true" />
setting in web.config
file locally (if that setting is locked then it would need to be done by an admin in the machine.config
file).
Setting <identity impersonate="true">
is common in shared hosting environments where shared application pools are used (in conjunction with partial trust settings to prevent unwinding of the impersonated account).
In IIS7.x/ASP.NET impersonation control is now configured via the Authentication configuration feature of a site. So you can configure to run as the pool identity, IUSR
or a specific custom anonymous account.
LOCAL SERVICE:
The LOCAL SERVICE
account is a built-in account used by the service control manager. It has a minimum set of privileges on the local computer. It has a fairly limited scope of use:
LOCAL SYSTEM:
You didn't ask about this one but I'm adding for completeness. This is a local built-in account. It has fairly extensive privileges and trust. You should never configure a website or application pool to run under this identity.
In Practice:
In practice the preferred approach to securing a website (if the site gets its own application pool - which is the default for a new site in IIS7's MMC) is to run under Application Pool Identity
. This means setting the site's Identity in its Application Pool's Advanced Settings to Application Pool Identity
:
In the website you should then configure the Authentication feature:
Right click and edit the Anonymous Authentication entry:
Ensure that "Application pool identity" is selected:
When you come to apply file and folder permissions you grant the Application Pool identity whatever rights are required. For example if you are granting the application pool identity for the ASP.NET v4.0
pool permissions then you can either do this via Explorer:
Click the "Check Names" button:
Or you can do this using the ICACLS.EXE
utility:
icacls c:\wwwroot\mysite /grant "IIS AppPool\ASP.NET v4.0":(CI)(OI)(M)
...or...if you site's application pool is called BobsCatPicBlog
then:
icacls c:\wwwroot\mysite /grant "IIS AppPool\BobsCatPicBlog":(CI)(OI)(M)
I hope this helps clear things up.
Update:
I just bumped into this excellent answer from 2009 which contains a bunch of useful information, well worth a read:
The difference between the 'Local System' account and the 'Network Service' account?
Build up a JavaScript data structure with the required information, then turn it into the json string at the end.
Based on what I think you're doing, try something like this:
var result = [];
for (var name in goals) {
if (goals.hasOwnProperty(name)) {
result.push({name: name, goals: goals[name]});
}
}
res.contentType('application/json');
res.send(JSON.stringify(result));
or something along those lines.
It would be this
array=($(ls -d */))
EDIT: See Gordon Davisson's solution for a more general answer (i.e. if your filenames contain special characters). This answer is merely a syntax correction.
WITH PATHLIB MODULE (UPDATED ANSWER)
One should consider using pathlib for new development. It is in the stdlib for Python3.4, but available on PyPI for earlier versions. This library provides a more object-orented method to manipulate paths <opinion>
and is much easier read and program with </opinion>
.
>>> import pathlib
>>> existGDBPath = pathlib.Path(r'T:\Data\DBDesign\DBDesign_93_v141b.mdb')
>>> wkspFldr = existGDBPath.parent
>>> print wkspFldr
Path('T:\Data\DBDesign')
WITH OS MODULE
Use the os.path module:
>>> import os
>>> existGDBPath = r'T:\Data\DBDesign\DBDesign_93_v141b.mdb'
>>> wkspFldr = os.path.dirname(existGDBPath)
>>> print wkspFldr
'T:\Data\DBDesign'
You can go ahead and assume that if you need to do some sort of filename manipulation it's already been implemented in os.path
. If not, you'll still probably need to use this module as the building block.
Well, you could always run a transform over the vector:
std::transform(v.begin(), v.end(), v.begin(), [mean](int i) -> int { return i - mean; });
You could always also devise an iterator adapter that returns the result of an operation applied to the dereference of its component iterator when it's dereferenced. Then you could just copy the vector to the output stream:
std::copy(adapter(v.begin(), [mean](int i) -> { return i - mean; }), v.end(), std::ostream_iterator<int>(cout, "\n"));
Or, you could use a for loop...but that's kind of boring.
toString() is a debug info string. The default implementation returns the class name and the system identity hash. Collections return all elements but arrays not.
Also be aware of NullPointerException
creating the log!
In this case a Arrays.toString()
may help:
Object temp = data.getParameterValue("request");
String log = temp == null ? "null" : (temp.getClass().isArray() ? Arrays.toString((Object[])temp) : temp.toString());
log.info("end " + temp);
You can also use Arrays.asList()
:
Object temp = data.getParameterValue("request");
Object log = temp == null ? null : (temp.getClass().isArray() ? Arrays.asList((Object[])temp) : temp);
log.info("end " + temp);
This may result in a ClassCastException
for primitive arrays (int[]
, ...).
It depends on what you mean by "dropped". For TCP sockets, if the other end closes the connection either through close() or the process terminating, you'll find out by reading an end of file, or getting a read error, usually the errno being set to whatever 'connection reset by peer' is by your operating system. For python, you'll read a zero length string, or a socket.error will be thrown when you try to read or write from the socket.
As of Confluence 4 and above, typing two curly brackets does not work.
You now need to select Monospace font. Highlight the text you want to change and:
Windows: Ctrl + Shift + M
Mac: Command + Shift + M
Alternatively, you can type a backtick (`) and Confluence will format everything until you type another backtick
Alternatively, next to the bold and italic options, you can click the "more" drop down and select Monospace:
Please check the permissions on the the ca certificates installed on server.
SimpleDateFormat formatter = new SimpleDateFormat("dd/MM/yyyy");
String dateInString = "07/06/2013";
try {
Date date = formatter.parse(dateInString);
System.out.println(date);
System.out.println(formatter.format(date));
} catch (ParseException e) {
e.printStackTrace();
}
Output:
2014/08/06 16:06:54
2014/08/06 16:06:54
ELXAN@DB1> create table cedvel(id integer,ad varchar2(15)); Table created. ELXAN@DB1> alter table cedvel add constraint pk_ad primary key(id); Table altered. ELXAN@DB1> create sequence test_seq start with 1 increment by 1; Sequence created. ELXAN@DB1> create or replace trigger ad_insert before insert on cedvel REFERENCING NEW AS NEW OLD AS OLD for each row begin select test_seq.nextval into :new.id from dual; end; / 2 3 4 5 6 7 8 Trigger created. ELXAN@DB1> insert into cedvel (ad) values ('nese'); 1 row created.
A source release will be compiled on your own machine while a binary release must match your operating system.
source releases are more common on linux systems because linux systems can dramatically vary in cpu, installed library versions, kernelversions and nearly every linux system has a compiler installed.
binary releases are common on ms-windows systems. most windows machines do not have a compiler installed.
Even better, try an OrderedDict (assuming you want something like a list). Closer to a list than a regular dict since the keys have an order just like list elements have an order. With a regular dict, the keys have an arbitrary order.
Note that this is available in Python 3 and 2.7. If you want to use with an earlier version of Python you can find installable modules to do that.
I'm not aware of any way to programmatically create these URLs, but the existing username space (www.facebook.com/something) works on fb.me also (e.g. http://fb.me/facebook )
To get the value of a pointer, just de-reference the pointer.
int *ptr;
int value;
*ptr = 9;
value = *ptr;
value is now 9.
I suggest you read more about pointers, this is their base functionality.
Along with JFileChooser is possible use this:
UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
for have a Look and Feel like Windows.
for others settings, view here: https://docs.oracle.com/javase/tutorial/uiswing/lookandfeel/plaf.html#available
The click event is not bound to your new element, use a jQuery.on
to handle the click.
Pinging google.com introduces a DNS resolution dependency. Pinging 8.8.8.8 is fine but Google is several hops away from me. All I need to do is to ping the nearest thing to me that is on the internet.
I can use Ping's TTL feature to ping hop #1, then hop #2, etc, until I get a reply from something that is on a routable address; if that node is on a routable address then it is on the internet. For most of us, hop #1 will be our local gateway/router, and hop #2 will be the first point on the other side of our fibre connection or whatever.
This code works for me, and responds quicker than some of the other suggestions in this thread because it is pinging whatever is nearest to me on the internet.
using System.Net;
using System.Net.Sockets;
using System.Net.NetworkInformation;
using System.Diagnostics;
internal static bool ConnectedToInternet()
{
const int maxHops = 30;
const string someFarAwayIpAddress = "8.8.8.8";
// Keep pinging further along the line from here to google
// until we find a response that is from a routable address
for (int ttl = 1; ttl <= maxHops; ttl++)
{
Ping pinger = new Ping();
PingOptions options = new PingOptions(ttl, true);
byte[] buffer = new byte[32];
PingReply reply = null;
try
{
reply = pinger.Send(someFarAwayIpAddress, 10000, buffer, options);
}
catch (System.Net.NetworkInformation.PingException pingex)
{
Debug.Print("Ping exception (probably due to no network connection or recent change in network conditions), hence not connected to internet. Message: " + pingex.Message);
return false;
}
System.Diagnostics.Debug.Print("Hop #" + ttl.ToString() + " is " + (reply.Address == null ? "null" : reply.Address.ToString()) + ", " + reply.Status.ToString());
if (reply.Status != IPStatus.TtlExpired && reply.Status != IPStatus.Success)
{
Debug.Print("Hop #" + ttl.ToString() + " is " + reply.Status.ToString() + ", hence we are not connected.");
return false;
}
if (IsRoutableAddress(reply.Address))
{
System.Diagnostics.Debug.Print("That's routable so you must be connected to the internet.");
return true;
}
}
return false;
}
private static bool IsRoutableAddress(IPAddress addr)
{
if (addr == null)
{
return false;
}
else if (addr.AddressFamily == AddressFamily.InterNetworkV6)
{
return !addr.IsIPv6LinkLocal && !addr.IsIPv6SiteLocal;
}
else // IPv4
{
byte[] bytes = addr.GetAddressBytes();
if (bytes[0] == 10)
{ // Class A network
return false;
}
else if (bytes[0] == 172 && bytes[1] >= 16 && bytes[1] <= 31)
{ // Class B network
return false;
}
else if (bytes[0] == 192 && bytes[1] == 168)
{ // Class C network
return false;
}
else
{ // None of the above, so must be routable
return true;
}
}
}
A couple years late, but here is a solution that retrieves both inline styling and external styling:
function css(a) {
var sheets = document.styleSheets, o = {};
for (var i in sheets) {
var rules = sheets[i].rules || sheets[i].cssRules;
for (var r in rules) {
if (a.is(rules[r].selectorText)) {
o = $.extend(o, css2json(rules[r].style), css2json(a.attr('style')));
}
}
}
return o;
}
function css2json(css) {
var s = {};
if (!css) return s;
if (css instanceof CSSStyleDeclaration) {
for (var i in css) {
if ((css[i]).toLowerCase) {
s[(css[i]).toLowerCase()] = (css[css[i]]);
}
}
} else if (typeof css == "string") {
css = css.split("; ");
for (var i in css) {
var l = css[i].split(": ");
s[l[0].toLowerCase()] = (l[1]);
}
}
return s;
}
Pass a jQuery object into css()
and it will return an object, which you can then plug back into jQuery's $().css()
, ex:
var style = css($("#elementToGetAllCSS"));
$("#elementToPutStyleInto").css(style);
:)
This is from the Android SDK source code. As you can see you have a special constructor to create a Spinner with the specified mode you wanna use.
Hope it will help you :)
/**
* Construct a new spinner with the given context's theme, the supplied attribute set,
* and default style. <code>mode</code> may be one of {@link #MODE_DIALOG} or
* {@link #MODE_DROPDOWN} and determines how the user will select choices from the spinner.
*
* @param context The Context the view is running in, through which it can
* access the current theme, resources, etc.
* @param attrs The attributes of the XML tag that is inflating the view.
* @param defStyle The default style to apply to this view. If 0, no style
* will be applied (beyond what is included in the theme). This may
* either be an attribute resource, whose value will be retrieved
* from the current theme, or an explicit style resource.
* @param mode Constant describing how the user will select choices from the spinner.
*
* @see #MODE_DIALOG
* @see #MODE_DROPDOWN
*/
public Spinner(Context context, AttributeSet attrs, int defStyle, int mode) {
super(context, attrs, defStyle);
I'd like to add to OJ's kind clarifications.
Virtual inheritance doesn't come without a price. Like with all things virtual, you get a performance hit. There is a way around this performance hit that is possibly less elegant.
Instead of breaking the diamond by deriving virtually, you can add another layer to the diamond, to get something like this:
B
/ \
D11 D12
| |
D21 D22
\ /
DD
None of the classes inherit virtually, all inherit publicly. Classes D21 and D22 will then hide virtual function f() which is ambiguous for DD, perhaps by declaring the function private. They'd each define a wrapper function, f1() and f2() respectively, each calling class-local (private) f(), thus resolving conflicts. Class DD calls f1() if it wants D11::f() and f2() if it wants D12::f(). If you define the wrappers inline you'll probably get about zero overhead.
Of course, if you can change D11 and D12 then you can do the same trick inside these classes, but often that is not the case.
None of the above worked for me. My app was working fine in previous than Lollipop. But when I tested it on Lollipop the above error came up. It refused to install. I didn't have any previous versions installed so all the above solutions are invalid in my case. But thanks to this SO solution now it is running fine. Just like most developers I followed Google's misleading tutorial and I added the permissions by copy and paste like this:
<uses-permission android:name="com.google.android.c2dm.permission.RECEIVE" />
<permission android:name="com.google.android.permission.C2D_MESSAGE"
android:protectionLevel="signature" />
This would work with older versions < Lollipop. So now I changed to:
<uses-permission android:name="com.mycompany.myappname.c2dm.permission.RECEIVE" />
<permission android:name="com.mycompany.myappname.permission.C2D_MESSAGE"
android:protectionLevel="signature" />
Replace your implementation
with classpath
. That should work.
You shouldn't use both ngRoute
and UI-router
. Here's a sample code for UI-router:
repoApp.config(function($stateProvider, $urlRouterProvider) {_x000D_
_x000D_
$stateProvider_x000D_
.state('state1', {_x000D_
url: "/state1",_x000D_
templateUrl: "partials/state1.html",_x000D_
controller: 'YourCtrl'_x000D_
})_x000D_
_x000D_
.state('state2', {_x000D_
url: "/state2",_x000D_
templateUrl: "partials/state2.html",_x000D_
controller: 'YourOtherCtrl'_x000D_
});_x000D_
$urlRouterProvider.otherwise("/state1");_x000D_
});_x000D_
//etc.
_x000D_
You can find a great answer on the difference between these two in this thread: What is the difference between angular-route and angular-ui-router?
You can also consult UI-Router's docs here: https://github.com/angular-ui/ui-router
Shoot! I knew about this problem. I thought I was doing everything right until I accidentally saw 'x86' in the VS output window and that's when I got hold of the cause. Wasted a few mins on it today.
The configuration under 'Publish' window was set to 'x86'; whereas, everywhere else, it was 'x64'.
Please make sure it's in-sync across configuration manager, publish settings, solution configurations, and IIS settings (if that's your web server).
Also, please keep in mind - VS is a 32-bit app and IIS is 64 bit. 32-bit apps are disabled by default in IIS.
Resolved too big image issue and avoid to out of memory.
private static final int SELECT_PICTURE = 0;
private static final int REQUEST_CAMERA = 1;
private ImageView mImageView;
private void selectImage() {
final CharSequence[] items = {"Take Photo", "Choose from Library",
"Cancel"};
AlertDialog.Builder builder = new AlertDialog.Builder(mContext);
builder.setTitle("Add Photo!");
builder.setItems(items, new DialogInterface.OnClickListener() {
@Override
public void onClick(DialogInterface dialog, int item) {
if (items[item].equals("Take Photo")) {
Intent intent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE);
File f = new File(android.os.Environment
.getExternalStorageDirectory(), "temp.jpg");
intent.putExtra(MediaStore.EXTRA_OUTPUT, Uri.fromFile(f));
startActivityForResult(intent, REQUEST_CAMERA);
} else if (items[item].equals("Choose from Library")) {
Intent intent = new Intent(
Intent.ACTION_PICK, android.provider.MediaStore.Images.Media.EXTERNAL_CONTENT_URI);
intent.setType("image/*");
startActivityForResult(
Intent.createChooser(intent, "Select File"),
SELECT_PICTURE);
} else if (items[item].equals("Cancel")) {
dialog.dismiss();
}
}
});
builder.show();
}
@Override
public void onActivityResult(int requestCode, int resultCode, Intent data) {
super.onActivityResult(requestCode, resultCode, data);
if (resultCode == Activity.RESULT_OK) {
if (requestCode == REQUEST_CAMERA) {
File f = new File(Environment.getExternalStorageDirectory()
.toString());
for (File temp : f.listFiles()) {
if (temp.getName().equals("temp.jpg")) {
f = temp;
break;
}
}
try {
Bitmap bm;
BitmapFactory.Options btmapOptions = new BitmapFactory.Options();
btmapOptions.inSampleSize = 2;
bm = BitmapFactory.decodeFile(f.getAbsolutePath(),
btmapOptions);
// bm = Bitmap.createScaledBitmap(bm, 70, 70, true);
mImageView.setImageBitmap(bm);
String path = android.os.Environment
.getExternalStorageDirectory()
+ File.separator
+ "test";
f.delete();
OutputStream fOut = null;
File file = new File(path, String.valueOf(System
.currentTimeMillis()) + ".jpg");
fOut = new FileOutputStream(file);
bm.compress(Bitmap.CompressFormat.JPEG, 85, fOut);
fOut.flush();
fOut.close();
} catch (Exception e) {
e.printStackTrace();
}
} else if (requestCode == SELECT_PICTURE) {
Uri selectedImageUri = data.getData();
String tempPath = getPath(selectedImageUri, this.getActivity());
Bitmap bm;
btmapOptions.inSampleSize = 2;
BitmapFactory.Options btmapOptions = new BitmapFactory.Options();
bm = BitmapFactory.decodeFile(tempPath, btmapOptions);
mImageView.setImageBitmap(bm);
}
}
}
public String getPath(Uri uri, Activity activity) {
String[] projection = {MediaStore.MediaColumns.DATA};
Cursor cursor = activity
.managedQuery(uri, projection, null, null, null);
int column_index = cursor.getColumnIndexOrThrow(MediaStore.MediaColumns.DATA);
cursor.moveToFirst();
return cursor.getString(column_index);
}
html code here
<input id="result" style="width:300px"/>some example text
<button onclick="copyToClipboard('result')">Copy P1</button>
<input type="text" style="width:400px" placeholder="Paste here for test" />
JS CODE:
function copyToClipboard(elementId) {
// Create a "hidden" input
var aux = document.createElement("input");
aux.setAttribute("value", document.getElementById(elementId).value);
// Append it to the body
document.body.appendChild(aux);
// Highlight its content
aux.select();
// Copy the highlighted text
document.execCommand("copy");
// Remove it from the body
document.body.removeChild(aux);
}
Since the original question also involves a desktop and laptop and example involving music files (hence he's probably using a GUI), I'd also mention one of the best bi-directional, multi-platform, free and open source programs to date: FreeFileSync.
It's GUI based, very fast and intuitive, comes with filtering and many other options, including the ability to remote connect, to view and interactively manage "collisions" (in example, files with similar timestamps) and to switch between bidirectional transfer, mirroring and so on.
np.isnan
can be applied to NumPy arrays of native dtype (such as np.float64):
In [99]: np.isnan(np.array([np.nan, 0], dtype=np.float64))
Out[99]: array([ True, False], dtype=bool)
but raises TypeError when applied to object arrays:
In [96]: np.isnan(np.array([np.nan, 0], dtype=object))
TypeError: ufunc 'isnan' not supported for the input types, and the inputs could not be safely coerced to any supported types according to the casting rule ''safe''
Since you have Pandas, you could use pd.isnull
instead -- it can accept NumPy arrays of object or native dtypes:
In [97]: pd.isnull(np.array([np.nan, 0], dtype=float))
Out[97]: array([ True, False], dtype=bool)
In [98]: pd.isnull(np.array([np.nan, 0], dtype=object))
Out[98]: array([ True, False], dtype=bool)
Note that None
is also considered a null value in object arrays.
Starting from Spring Boot version 1.2.0.RELEASE , there is a property you can add to your application.properties
to set a default date format to all of your classes spring.jackson.date-format
.
For your date format example, you would add this line to your properties file:
spring.jackson.date-format=yyyy-MM-dd
IEnumerable<int> ids = list.Select(x=>x.ID).Distinct();
Let's say that your list name is A
Then you can code the following and you will have it as a csv file (columns only!)
R="\n".join(A)
f = open('Columns.csv','w')
f.write(R)
f.close()
I haven't studied yet, when Maven does which look-up, but to get stable and reproducible builds, I strongly recommend not to access Maven Respositories directly but to use a Maven Repository Manager such as Nexus.
Here is the tutorial how to set up your settings file:
http://books.sonatype.com/nexus-book/reference/maven-sect-single-group.html
You are using the wrong iteration counter, replace inp.charAt(i)
with inp.charAt(j)
.
For everyone who is stuck with .NET 2.0, like me, try the following way (applicable to the example in the OP):
ConfigItemList.ConvertAll<string>(delegate (ConfigItemType ci)
{
return ci.Name;
}).ToArray();
where ConfigItemList is your list variable.
$('#my_select option:selected').attr('id');
How about this ? PHPSocketio ?? It is a socket.io php server side alternative. The event loop is based on pecl event extension. Though haven't tried it myself till now.
As others have noted, in order for a jar file to be executable, the application's entry point must be set in the Main-Class
attribute of the manifest file. If the dependency class files are not collocated, then they need to be set in the Class-Path
entry of the manifest file.
I have tried all kinds of plugin combinations and what not for the simple task of creating an executable jar and somehow someway, include the dependencies. All plugins seem to be lacking one way or another, but finally I got it like I wanted. No mysterious scripts, not a million different mini files polluting the build directory, a pretty clean build script file, and above all: not a million foreign third party class files merged into my jar archive.
The following is a copy-paste from here for your convenience..
[How-to] create a distribution zip file with dependency jars in subdirectory /lib
and add all dependencies to Class-Path
entry in the manifest file:
apply plugin: 'java'
apply plugin: 'java-library-distribution'
repositories {
mavenCentral()
}
dependencies {
compile 'org.apache.commons:commons-lang3:3.3.2'
}
// Task "distZip" added by plugin "java-library-distribution":
distZip.shouldRunAfter(build)
jar {
// Keep jar clean:
exclude 'META-INF/*.SF', 'META-INF/*.DSA', 'META-INF/*.RSA', 'META-INF/*.MF'
manifest {
attributes 'Main-Class': 'com.somepackage.MainClass',
'Class-Path': configurations.runtime.files.collect { "lib/$it.name" }.join(' ')
}
// How-to add class path:
// https://stackoverflow.com/questions/22659463/add-classpath-in-manifest-using-gradle
// https://gist.github.com/simon04/6865179
}
Hosted as a gist here.
The result can be found in build/distributions
and the unzipped contents look like this:
lib/commons-lang3-3.3.2.jar
MyJarFile.jar
Contents of MyJarFile.jar#META-INF/MANIFEST.mf
:
Manifest-Version: 1.0
Main-Class: com.somepackage.MainClass
Class-Path: lib/commons-lang3-3.3.2.jar
To ignore this error for one instance only, add the tools:ignore="ProtectedPermissions"
attribute to your permission declaration. Here is an example:
<uses-permission android:name="android.permission.READ_PRIVILEGED_PHONE_STATE"
tools:ignore="ProtectedPermissions" />
You have to add tools
namespace in the manifest root element
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:tools="http://schemas.android.com/tools"
How about calling the .NET Framework methods?
You can do ANYTHING with them... :
[System.IO.File]::Copy($src, $dest, $true);
The $true
argument makes it overwrite.
# reassign depth values under 10 to zero
df$depth[df$depth<10] <- 0
(For the columns that are factors, you can only assign values that are factor levels. If you wanted to assign a value that wasn't currently a factor level, you would need to create the additional level first:
levels(df$species) <- c(levels(df$species), "unknown")
df$species[df$depth<10] <- "unknown"
for jQuery 1.6 or higher:
if ($('input.checkbox_check').prop('checked')) {
//blah blah
}
the cross-browser-compatible way to determine if a checkbox is checked is to use the property https://api.jquery.com/prop/
You can use the .Clear method:
Sheets("Zeros").UsedRange.Clear
Using this you can remove the contents and the formatting of a cell or range without affecting the rest of the worksheet.
On Ubuntu; using mkvirtualenv -p python3 env_name
loads the virtualenv with python3.
Inside the env, use python --version
to verify.
Works in Ubuntu 20.04
Add this line inside <policymap>
<policy domain="module" rights="read|write" pattern="{PS,PDF,XPS}" />
Comment these lines:
<!--
<policy domain="coder" rights="none" pattern="PS" />
<policy domain="coder" rights="none" pattern="PS2" />
<policy domain="coder" rights="none" pattern="PS3" />
<policy domain="coder" rights="none" pattern="EPS" />
<policy domain="coder" rights="none" pattern="PDF" />
<policy domain="coder" rights="none" pattern="XPS" />
-->
Open anaconda prompt
make sure your pip version is updated
and you have python 3.4 3.5 or 3.6
Just run the command
pip install --upgrade tensorflow
you can take help from the documentation and video
Goodluck
You could do:
sub("*\\.[0-9]", "", a)
or
library(stringr)
str_sub(a, start=1, end=-3)
Other posters have already explained why the :focus
pseudo class is insufficient, but finally there is a CSS-based standard solution.
CSS Selectors Level 4 defines a new pseudo class:
From MDN:
The
:focus-within
CSS pseudo-class matches any element that the:focus
pseudo-class matches or that has a descendant that the:focus
pseudo-class matches. (This includes descendants in shadow trees.)
So now with the :focus-within
pseudo class - styling the outer div when the textarea
gets clicked becomes trivial.
.box:focus-within {
border: thin solid black;
}
.box {_x000D_
width: 300px;_x000D_
height: 300px;_x000D_
border: 5px dashed red;_x000D_
}_x000D_
_x000D_
.box:focus-within {_x000D_
border: 5px solid green;_x000D_
}
_x000D_
<p>The outer box border changes when the textarea gets focus.</p>_x000D_
<div class="box">_x000D_
<textarea rows="10" cols="25"></textarea>_x000D_
</div>
_x000D_
NB: Browser Support : Chrome (60+), Firefox and Safari
I had the same problem.please do the following it may help you: By Default List View Threshold set at only 5,000 items this is because of Sharepoint server performance.
To Change the LVT:
Click OK to save it.
This was extremely helpful for me when trying to automate Cisco SIP phone configuration using an Excel spreadsheet as the source. My only issue was when I tried to make an array and populate it using $array | Add-Member ...
as I needed to use it later on to generate the config file. Just defining an array and making it the for loop allowed it to store correctly.
$lastCell = 11
$startRow, $model, $mac, $nOF, $ext = 1, 1, 5, 6, 7
$excel = New-Object -ComObject excel.application
$wb = $excel.workbooks.open("H:\Strike Network\Phones\phones.xlsx")
$sh = $wb.Sheets.Item(1)
$endRow = $sh.UsedRange.SpecialCells($lastCell).Row
$phoneData = for ($i=1; $i -le $endRow; $i++)
{
$pModel = $sh.Cells.Item($startRow,$model).Value2
$pMAC = $sh.Cells.Item($startRow,$mac).Value2
$nameOnPhone = $sh.Cells.Item($startRow,$nOF).Value2
$extension = $sh.Cells.Item($startRow,$ext).Value2
New-Object PSObject -Property @{ Model = $pModel; MAC = $pMAC; NameOnPhone = $nameOnPhone; Extension = $extension }
$startRow++
}
I used to have no issues adding information to an array with Add-Member but that was back in PSv2/3, and I've been away from it a while. Though the simple solution saved me manually configuring 100+ phones and extensions - which nobody wants to do.
Because the statement defining obj
hasn't finished, key1
doesn't exist yet. Consider this solution:
var obj = { key1: "it" };
obj.key2 = obj.key1 + ' ' + 'works!';
// obj.key2 is now 'it works!'
It is common for comparison functions to return 0
on "equals", so that they can also return a negative number for "less than" and a positive number for "greater than". strcmp()
and memcmp()
work like this.
It is, however, idiomatic for zero to be false and nonzero to be true, because this is how the C flow control and logical boolean operators work. So it might be that the return values chosen for this function are fine, but it is the function's name that is in error (it should really just be called compare()
or similar).
Use lang attribut on the input. Locale on my web app fr_FR, lang="en_EN" on the input number and i can use indifferently a comma or a dot. Firefox always display a dot, Chrome display a comma. But both separtor are valid.
So many responses here require coding changes and customized classes and it really is not necessary. Gte a debugging proxy such as fiddler and set your java environment to use the proxy on the command line (-Dhttp.proxyHost and -Dhttp.proxyPort) then run fiddler and you can see the requests and responses in their entirety. Also comes with many ancillary advantages such as the ability to tinker with the results and responses before and after they are sent to run experiments before committing to modification of the server.
Last bit of an issue that can come up is if you must use HTTPS, you will need to export the SSL cert from fiddler and import it into the java keystore (cacerts) hint: default java keystore password is usually "changeit".
What about that?
HTML
<div class="chart" id="graph" data-percent="88"></div>
Javascript
var el = document.getElementById('graph'); // get canvas
var options = {
percent: el.getAttribute('data-percent') || 25,
size: el.getAttribute('data-size') || 220,
lineWidth: el.getAttribute('data-line') || 15,
rotate: el.getAttribute('data-rotate') || 0
}
var canvas = document.createElement('canvas');
var span = document.createElement('span');
span.textContent = options.percent + '%';
if (typeof(G_vmlCanvasManager) !== 'undefined') {
G_vmlCanvasManager.initElement(canvas);
}
var ctx = canvas.getContext('2d');
canvas.width = canvas.height = options.size;
el.appendChild(span);
el.appendChild(canvas);
ctx.translate(options.size / 2, options.size / 2); // change center
ctx.rotate((-1 / 2 + options.rotate / 180) * Math.PI); // rotate -90 deg
//imd = ctx.getImageData(0, 0, 240, 240);
var radius = (options.size - options.lineWidth) / 2;
var drawCircle = function(color, lineWidth, percent) {
percent = Math.min(Math.max(0, percent || 1), 1);
ctx.beginPath();
ctx.arc(0, 0, radius, 0, Math.PI * 2 * percent, false);
ctx.strokeStyle = color;
ctx.lineCap = 'round'; // butt, round or square
ctx.lineWidth = lineWidth
ctx.stroke();
};
drawCircle('#efefef', options.lineWidth, 100 / 100);
drawCircle('#555555', options.lineWidth, options.percent / 100);
and CSS
div {
position:relative;
margin:80px;
width:220px; height:220px;
}
canvas {
display: block;
position:absolute;
top:0;
left:0;
}
span {
color:#555;
display:block;
line-height:220px;
text-align:center;
width:220px;
font-family:sans-serif;
font-size:40px;
font-weight:100;
margin-left:5px;
}
http://jsfiddle.net/Aapn8/3410/
Basic code was taken from Simple PIE Chart http://rendro.github.io/easy-pie-chart/
If you think you are going to be needing the superclass, you could reference it in a variable for that class. For example:
public class Foo
{
public int getNumber()
{
return 0;
}
}
public class SuperFoo extends Foo
{
public static Foo superClass = new Foo();
public int getNumber()
{
return 1;
}
}
public class UltraFoo extends Foo
{
public static void main(String[] args)
{
System.out.println(new UltraFoo.getNumber());
System.out.println(new SuperFoo().getNumber());
System.out.println(new SuperFoo().superClass.getNumber());
}
public int getNumber()
{
return 2;
}
}
Should print out:
2
1
0
Send XML requests with the raw
data type, then set the Content-Type to text/xml
.
After creating a request, use the dropdown to change the request type to POST.
Open the Body tab and check the data type for raw.
Open the Content-Type selection box that appears to the right and select either XML (application/xml) or XML (text/xml)
Enter your raw XML data into the input field below
Click Send to submit your XML Request to the specified server.
You can do it without modifying the XML stream: Tell the XmlReader to not be so picky.
Setting the XmlReaderSettings.ConformanceLevel
to ConformanceLevel.Fragment
will let the parser ignore the fact that there is no root node.
XmlReaderSettings settings = new XmlReaderSettings();
settings.ConformanceLevel = ConformanceLevel.Fragment;
using (XmlReader reader = XmlReader.Create(tr,settings))
{
...
}
Now you can parse something like this (which is an real time XML stream, where it is impossible to wrap with a node).
<event>
<timeStamp>1354902435238</timeStamp>
<eventId>7073822</eventId>
</event>
<data>
<time>1354902435341</time>
<payload type='80'>7d1300786a0000000bf9458b0518000000000000000000000000000000000c0c030306001b</payload>
</data>
<data>
<time>1354902435345</time>
<payload type='80'>fd1260780912ff3028fea5ffc0387d640fa550f40fbdf7afffe001fff8200fff00f0bf0e000042201421100224ff40312300111400004f000000e0c0fbd1e0000f10e0fccc2ff0000f0fe00f00f0eed00f11e10d010021420401</payload>
</data>
<data>
<time>1354902435347</time>
<payload type='80'>fd126078ad11fc4015fefdf5b042ff1010223500000000000000003007ff00f20e0f01000e0000dc0f01000f000000000000004f000000f104ff001000210f000013010000c6da000000680ffa807800200000000d00c0f0</payload>
</data>
I believe you are looking for the setTimeout function.
To make your code a little neater, define a separate function for onclick in a <script>
block:
function myClick() {
setTimeout(
function() {
document.getElementById('div1').style.display='none';
document.getElementById('div2').style.display='none';
}, 5000);
}
then call your function from onclick
onclick="myClick();"
I think that's better to use flex boxes (compatibility) than the absolute position. Here's example from me in pure css.
.container{_x000D_
background-color:green;_x000D_
height:500px;_x000D_
_x000D_
/*FLEX BOX */_x000D_
display: -ms-flexbox;_x000D_
display: -webkit-flex;_x000D_
display: flex;_x000D_
-webkit-flex-direction: column;_x000D_
-ms-flex-direction: column;_x000D_
flex-direction: column;_x000D_
-webkit-flex-wrap: nowrap;_x000D_
-ms-flex-wrap: nowrap;_x000D_
flex-wrap: nowrap;_x000D_
-webkit-justify-content: flex-start;_x000D_
-ms-flex-pack: start;_x000D_
justify-content: flex-start;_x000D_
-webkit-align-content: stretch;_x000D_
-ms-flex-line-pack: stretch;_x000D_
align-content: stretch;_x000D_
-webkit-align-items: flex-start;_x000D_
-ms-flex-align: start;_x000D_
align-items: flex-start;_x000D_
}_x000D_
_x000D_
.elem1{_x000D_
background-color:red;_x000D_
padding:20px;_x000D_
_x000D_
/*FLEX BOX CHILD */_x000D_
-webkit-order: 0;_x000D_
-ms-flex-order: 0;_x000D_
order: 0;_x000D_
-webkit-flex: 0 1 auto;_x000D_
-ms-flex: 0 1 auto;_x000D_
flex: 0 1 auto;_x000D_
-webkit-align-self: flex-end;_x000D_
-ms-flex-item-align: end;_x000D_
align-self: flex-end;_x000D_
_x000D_
}
_x000D_
<div class="container">_x000D_
TOP OF CONTAINER _x000D_
<div class="elem1">_x000D_
Nam pretium turpis et arcu. Sed a libero. Sed mollis, eros et ultrices tempus, mauris ipsum aliquam libero, non adipiscing dolor urna a orci._x000D_
_x000D_
Mauris sollicitudin fermentum libero. Pellentesque libero tortor, tincidunt et, tincidunt eget, semper nec, quam. Quisque id mi._x000D_
_x000D_
Donec venenatis vulputate lorem. Maecenas ullamcorper, dui et placerat feugiat, eros pede varius nisi, condimentum viverra felis nunc et lorem. Curabitur vestibulum aliquam leo._x000D_
</div>_x000D_
_x000D_
</div>
_x000D_
You should enable the unicode strings feature, and this is the default if you use v5.14;
You should not really use unicode identifiers esp. for foreign code via utf8 as they are insecure in perl5, only cperl got that right. See e.g. http://perl11.org/blog/unicode-identifiers.html
Regarding utf8 for your filehandles/streams: You need decide by yourself the encoding of your external data. A library cannot know that, and since not even libc supports utf8, proper utf8 data is rare. There's more wtf8, the windows aberration of utf8 around.
BTW: Moose is not really "Modern Perl", they just hijacked the name. Moose is perfect Larry Wall-style postmodern perl mixed with Bjarne Stroustrup-style everything goes, with an eclectic aberration of proper perl6 syntax, e.g. using strings for variable names, horrible fields syntax, and a very immature naive implementation which is 10x slower than a proper implementation. cperl and perl6 are the true modern perls, where form follows function, and the implementation is reduced and optimized.
If you want to preserve the order of the element with the same length as the original array, use bubble sort.
Input = ["ab","cdc","abcd","de"];
Output = ["ab","cd","cdc","abcd"]
Function:
function bubbleSort(strArray){
const arrayLength = Object.keys(strArray).length;
var swapp;
var newLen = arrayLength-1;
var sortedStrArrByLenght=strArray;
do {
swapp = false;
for (var i=0; i < newLen; i++)
{
if (sortedStrArrByLenght[i].length > sortedStrArrByLenght[i+1].length)
{
var temp = sortedStrArrByLenght[i];
sortedStrArrByLenght[i] = sortedStrArrByLenght[i+1];
sortedStrArrByLenght[i+1] = temp;
swapp = true;
}
}
newLen--;
} while (swap);
return sortedStrArrByLenght;
}
I was confused about what 'add' really does. I just read a very enlightening paragraph from the book Git Pro that I'd like to add here, because it clarifies things
“It turns out that Git stages a file exactly as it is when you run the git add command. If you commit now, the version of benchmarks.rb as it was when you last ran the git add command is how it will go into the commit, not the version of the file as it looks in your working directory when you run git commit. If you modify a file after you run git add, you have to run git add again to stage the latest version of the file:”
Excerpt From: Chacon, Scott. “Pro Git.” Springer, 2009-08-19T00:00:00+00:00. iBooks. This material may be protected by copyright.
SOAP (communication protocol) for communication between applications. Uses HTTP (port 80) or SMTP ( port 25 or 2525 ), for message negotiation and transmission.
Some handy script:
hour = df['assess_time'].dt.hour.values[0]
Try this instead:
sumall = summ + sumd + sumy
print "The sum of your numbers is", sumall
sumall = str(sumall) # add this line
sumln = (int(sumall[0])+int(sumall[1]))
print "Your lucky number is", sumln
sumall
is a number, and you can't access its digits using the subscript notation (sumall[0]
, sumall[1]
). For that to work, you'll need to transform it back to a string.
Just wondering why you are using 2 directives?
It seems like, in this case it would be more straightforward to have a controller as the parent - handle adding the data from your service to its $scope, and pass the model you need from there into your warrantyDirective.
Or for that matter, you could use 0 directives to achieve the same result. (ie. move all functionality out of the separate directives and into a single controller).
It doesn't look like you're doing any explicit DOM transformation here, so in this case, perhaps using 2 directives is overcomplicating things.
Alternatively, have a look at the Angular documentation for directives: http://docs.angularjs.org/guide/directive The very last example at the bottom of the page explains how to wire up dependent directives.
If you want to plot a single line connecting all the points in the list
plt.plot(li[:])
plt.show()
This will plot a line connecting all the pairs in the list as points on a Cartesian plane from the starting of the list to the end. I hope that this is what you wanted.
Aside from pandas, Apache pyarrow also provides way to transform parquet to dataframe
The code is simple, just type:
import pyarrow.parquet as pq
df = pq.read_table(source=your_file_path).to_pandas()
For more information, see the document from Apache pyarrow Reading and Writing Single Files
You seem to misunderstand the box model - in CSS you provide points for the top and left and then width and height - these are all that are needed for a box to be placed with exact measurements.
The width
property is what your C-D
is, but it is also what A-B
is. If you omit it, the div will not have a defined width and the width will be defined by its contents.
Update (following the comments on the question:
Add a border-bottom-style: none;
to your CSS to remove this style from the bottom only.
Encode each value in the list to a string:
[x.encode('UTF8') for x in EmployeeList]
You need to pick a valid encoding; don't use str()
as that'll use the system default (for Python 2 that's ASCII) which will not encode all possible codepoints in a Unicode value.
UTF-8 is capable of encoding all of the Unicode standard, but any codepoint outside the ASCII range will lead to multiple bytes per character.
However, if all you want to do is test for a specific string, test for a unicode string and Python won't have to auto-encode all values when testing for that:
u'1001' in EmployeeList.values()
The sort
method and sorted
function allow you to provide a custom function to extract the key used for comparison:
>>> ls = ['Q1.3', 'Q6.1', 'Q1.2']
>>> sorted(ls, key=lambda x: float(x[1:]))
['Q1.2', 'Q1.3', 'Q6.1']
Hi to pass values from one js file to another js file we can use Local storage concept
<body>
<script src="two.js"></script>
<script src="three.js"></script>
<button onclick="myFunction()">Click me</button>
<p id="demo"></p>
</body>
Two.js file
function myFunction() {
var test =localStorage.name;
alert(test);
}
Three.js File
localStorage.name = 1;
XML comments start with <!--
and end with -->
.
For example:
<!-- This is a comment. -->
Using sudo is not recommended. It may give you permission issue later. While the above works, I am not a fan of changing folders owned by root to be writable for users, although it may only be an issue with multiple users. To work around that, you could use a group, with 'npm users' but that is also more administrative overhead. See here for the options to deal with permissions from the documentation: https://docs.npmjs.com/getting-started/fixing-npm-permissions
I would go for option 2:
To minimize the chance of permissions errors, you can configure npm to use a different directory. In this example, it will be a hidden directory on your home folder.
Make a directory for global installations:
mkdir ~/.npm-global
Configure npm to use the new directory path:
npm config set prefix '~/.npm-global'
Open or create a ~/.profile file and add this line:
export PATH=~/.npm-global/bin:$PATH
Back on the command line, update your system variables:
source ~/.profile
Test: Download a package globally without using sudo.
npm install -g jshint
If still show permission error run (mac os):
sudo chown -R $USER ~/.npm-global
This works with the default ubuntu install of:
sudo apt-get install nodejs npm
I recommend nvm
if you want more flexibility in managing versions:
https://github.com/creationix/nvm
On MacOS use brew, it should work without sudo
out of the box if you're on a recent npm
version.
Enjoy :)
To list files based on size in asending order.
find ./ -size +1000M -exec ls -tlrh {} \; |awk -F" " '{print $5,$9}' | sort -n\
If you're escaping for HTML, there are only three that I can think of that would be really necessary:
html.replace(/&/g, "&").replace(/</g, "<").replace(/>/g, ">");
Depending on your use case, you might also need to do things like "
to "
. If the list got big enough, I'd just use an array:
var escaped = html;
var findReplace = [[/&/g, "&"], [/</g, "<"], [/>/g, ">"], [/"/g, """]]
for(var item in findReplace)
escaped = escaped.replace(findReplace[item][0], findReplace[item][1]);
encodeURIComponent()
will only escape it for URLs, not for HTML.
After two dozens of comments to understand the situation, it was found that the libhdf5.so.7
was actually a symlink (with several levels of indirection) to a file that was not shared between the queued processes and the interactive processes. This means even though the symlink itself lies on a shared filesystem, the contents of the file do not and as a result the process was seeing different versions of the library.
For future reference: other than checking LD_LIBRARY_PATH
, it's always a good idea to check a library with nm -D
to see if the symbols actually exist. In this case it was found that they do exist in interactive mode but not when run in the queue. A quick md5sum
revealed that the files were actually different.
OpenStreetMap seems to have 10-20 per second
Wikipedia seems to be 30000 to 70000 per second spread over 300 servers (100 to 200 requests per second per machine, most of which is caches)
Geograph is getting 7000 images per week (1 upload per 95 seconds)
You can use DataFrame.any
with parameter axis=1
for check at least one True
in row by DataFrame.isna
with boolean indexing
:
df1 = df[df.isna().any(axis=1)]
d = {'filename': ['M66_MI_NSRh35d32kpoints.dat', 'F71_sMI_DMRI51d.dat', 'F62_sMI_St22d7.dat', 'F41_Car_HOC498d.dat', 'F78_MI_547d.dat'], 'alpha1': [0.8016, 0.0, 1.721, 1.167, 1.897], 'alpha2': [0.9283, 0.0, 3.833, 2.809, 5.459], 'gamma1': [1.0, np.nan, 0.23748000000000002, 0.36419, 0.095319], 'gamma2': [0.074804, 0.0, 0.15, 0.3, np.nan], 'chi2min': [39.855990000000006, 1e+25, 10.91832, 7.966335000000001, 25.93468]}
df = pd.DataFrame(d).set_index('filename')
print (df)
alpha1 alpha2 gamma1 gamma2 chi2min
filename
M66_MI_NSRh35d32kpoints.dat 0.8016 0.9283 1.000000 0.074804 3.985599e+01
F71_sMI_DMRI51d.dat 0.0000 0.0000 NaN 0.000000 1.000000e+25
F62_sMI_St22d7.dat 1.7210 3.8330 0.237480 0.150000 1.091832e+01
F41_Car_HOC498d.dat 1.1670 2.8090 0.364190 0.300000 7.966335e+00
F78_MI_547d.dat 1.8970 5.4590 0.095319 NaN 2.593468e+01
Explanation:
print (df.isna())
alpha1 alpha2 gamma1 gamma2 chi2min
filename
M66_MI_NSRh35d32kpoints.dat False False False False False
F71_sMI_DMRI51d.dat False False True False False
F62_sMI_St22d7.dat False False False False False
F41_Car_HOC498d.dat False False False False False
F78_MI_547d.dat False False False True False
print (df.isna().any(axis=1))
filename
M66_MI_NSRh35d32kpoints.dat False
F71_sMI_DMRI51d.dat True
F62_sMI_St22d7.dat False
F41_Car_HOC498d.dat False
F78_MI_547d.dat True
dtype: bool
df1 = df[df.isna().any(axis=1)]
print (df1)
alpha1 alpha2 gamma1 gamma2 chi2min
filename
F71_sMI_DMRI51d.dat 0.000 0.000 NaN 0.0 1.000000e+25
F78_MI_547d.dat 1.897 5.459 0.095319 NaN 2.593468e+01
Finally, I've defeated my CiSCO EAP-FAST corporate wifi network, and all our Android devices are now able to connect to it.
The walk-around I've performed in order to gain access to this kind of networks from an Android device are easiest than you can imagine.
There's a Wifi Config Editor in the Google Play Store you can use to "activate" the secondary CISCO Protocols when you are setting up a EAP wifi connection.
Its name is Wifi Config Advanced Editor.
First, you have to setup your wireless network manually as close as you can to your "official" corporate wifi parameters.
Save it.
Go to the WCE and edit the parameters of the network you have created in the previous step.
There are 3 or 4 series of settings you should activate in order to force the Android device to use them as a way to connect (the main site I think you want to visit is Enterprise Configuration, but don't forget to check all the parameters to change them if needed.
As a suggestion, even if you have a WPA2 EAP-FAST Cipher, try LEAP in your setup. It worked for me as a charm.
When you finished to edit the config, go to the main Android wifi controller, and force to connect to this network.
Do not Edit the network again with the Android wifi interface.
I have tested it on Samsung Galaxy 1 and 2, Note mobile devices, and on a Lenovo Thinkpad Tablet.