use like this.....
Create file
#import <Foundation/Foundation.h>`
#import "SharedManager.h"
#import "Constant.h"
#import "UserDetails.h"
@interface APISession : NSURLSession<NSURLSessionDelegate>
@property (nonatomic, retain) NSMutableData *responseData;
+(void)postRequetsWithParam:(NSMutableDictionary* )objDic withAPIName:(NSString*
)strAPIURL completionHandler:(void (^)(id result, BOOL status))completionHandler;
@end
****************.m*************************
#import "APISession.h"
#import <UIKit/UIKit.h>
@implementation APISession
+(void)postRequetsWithParam:(NSMutableDictionary *)objDic withAPIName:(NSString
*)strAPIURL completionHandler:(void (^)(id, BOOL))completionHandler
{
NSURL *url=[NSURL URLWithString:strAPIURL];
NSMutableURLRequest *request=[[NSMutableURLRequest alloc]initWithURL:url];
[request setHTTPMethod:@"POST"];
[request addValue:@"application/json" forHTTPHeaderField:@"Content-Type"];
NSError *err = nil;
NSData *data=[NSJSONSerialization dataWithJSONObject:objDic options:NSJSONWritingPrettyPrinted error:&err];
[request setHTTPBody:data];
NSString *strJsonFormat = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
NSLog(@"API URL: %@ \t Api Request Parameter ::::::::::::::%@",url,strJsonFormat);
// NSLog(@"Request data===%@",objDic);
NSURLSessionConfiguration *defaultConfigObject = [NSURLSessionConfiguration defaultSessionConfiguration];
NSURLSession *session = [NSURLSession sessionWithConfiguration: defaultConfigObject delegate: nil delegateQueue: [NSOperationQueue mainQueue]];
// NSURLSession *session=[NSURLSession sharedSession];
NSURLSessionTask *task=[session dataTaskWithRequest:request completionHandler:^(NSData * _Nullable data, NSURLResponse * _Nullable response, NSError * _Nullable error)
{
if (error==nil) {
NSDictionary *dicData=[NSJSONSerialization JSONObjectWithData:data options:NSJSONReadingAllowFragments error:&error];\
NSLog(@"Response Data=============%@",dicData);
if([[dicData valueForKey:@"tokenExpired"]integerValue] == 1)
{
NSLog(@"hello");
NSDictionary *dict = [NSDictionary dictionaryWithObject:@"Access Token Expire." forKey:@"message"];
[[NSNotificationCenter defaultCenter] postNotificationName:@"UserLogOut" object:self userInfo:dict];
}
dispatch_async(dispatch_get_main_queue(), ^{
completionHandler(dicData,(error == nil));
});
NSLog(@"%@",dicData);
}
else{
dispatch_async(dispatch_get_main_queue(), ^{
completionHandler(error.localizedDescription,NO);
});
}
}];
// dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2.0 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
[task resume];
// });
}
@end
*****************************in .your view controller***********
#import "file"
txtEmail.text = [txtEmail.text stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceCharacterSet]];
{
[SVProgressHUD showWithStatus:@"Loading..."];
[SVProgressHUD setDefaultMaskType:SVProgressHUDMaskTypeGradient];
NSMutableDictionary *objLoginDic=[[NSMutableDictionary alloc] init];
[objLoginDic setValue:txtEmail.text forKey:@"email"];
[objLoginDic setValue:@0 forKey:kDeviceType];
[objLoginDic setValue:txtPassword.text forKey:kPassword];
[objLoginDic setValue:@"376545432" forKey:kDeviceTokan];
[objLoginDic setValue:@"" forKey:kcountryId];
[objLoginDic setValue:@"" forKey:kfbAccessToken];
[objLoginDic setValue:@0 forKey:kloginType];
[APISession postRequetsWithParam:objLoginDic withAPIName:KLOGIN_URL completionHandler:^(id result, BOOL status) {
[SVProgressHUD dismiss];
NSInteger statusResponse=[[result valueForKey:kStatus] integerValue];
NSString *strMessage=[result valueForKey:KMessage];
if (status) {
if (statusResponse == 1)
{
UserDetails *objLoginUserDetail=[[UserDetails alloc]
initWithObject:[result valueForKey:@"userDetails"]];
[[NSUserDefaults standardUserDefaults]
setObject:@(objLoginUserDetail.userId) forKey:@"user_id"];
[[NSUserDefaults standardUserDefaults] synchronize];
[self clearTextfeilds];
HomeScreen *obj=[Kiran_Storyboard instantiateViewControllerWithIdentifier:@"HomeScreen"];
[self.navigationController pushViewController:obj animated:YES];
}
else{
[strMessage showAsAlert:self];
}
}
}];
}
**********use model class for represnt data*************
#import <Foundation/Foundation.h>
#import "Constant.h"
#import <objc/runtime.h>
@interface UserDetails : NSObject
@property(strong,nonatomic) NSString *emailId,
*deviceToken,
*countryId,
*fbAccessToken,
*accessToken,
*countryName,
*isProfileSetup,
*profilePic,
*firstName,
*lastName,
*password;
@property (assign) NSInteger userId,deviceType,loginType;
-(id)initWithObject :(NSDictionary *)dicUserData;
-(void)saveLoginUserDetail;
+(UserDetails *)getLoginUserDetail;
-(UserDetails *)getEmptyModel;
- (NSArray *)allPropertyNames;
-(void)printDescription;
-(NSMutableDictionary *)getDictionary;
@end
******************model.m*************
#import "UserDetails.h"
#import "SharedManager.h"
@implementation UserDetails
-(id)initWithObject :(NSDictionary *)dicUserData
{
self = [[UserDetails alloc] init];
if (self)
{
@try {
[self setFirstName:([dicUserData valueForKey:@"firstName"] != [NSNull null])?
[dicUserData valueForKey:@"firstName"]:@""];
[self setUserId:([dicUserData valueForKey:kUserId] != [NSNull null])?
[[dicUserData valueForKey:kUserId] integerValue]:0];
}
@catch (NSException *exception) {
NSLog(@"Exception: %@",exception.description);
}
@finally {
}
}
return self;
}
-(UserDetails *)getEmptyModel{
[self setFirstName:@""];
[self setLastName:@""];
[self setDeviceType:0];
return self;
}
- (void)encodeWithCoder:(NSCoder *)encoder {
// Encode properties, other class variables, etc
[encoder encodeObject:_firstName forKey:kFirstName];
[encoder encodeObject:[NSNumber numberWithInteger:_deviceType] forKey:kDeviceType];
}
- (id)initWithCoder:(NSCoder *)decoder {
if((self = [super init])) {
_firstName = [decoder decodeObjectForKey:kEmailId];
_deviceType= [[decoder decodeObjectForKey:kDeviceType] integerValue];
}
return self;
}
- (NSArray *)allPropertyNames
{
unsigned count;
objc_property_t *properties = class_copyPropertyList([self class], &count);
NSMutableArray *rv = [NSMutableArray array];
unsigned i;
for (i = 0; i < count; i++)
{
objc_property_t property = properties[i];
NSString *name = [NSString stringWithUTF8String:property_getName(property)];
[rv addObject:name];
}
free(properties);
return rv;
}
-(void)printDescription{
NSMutableDictionary *dic = [[NSMutableDictionary alloc] init];
for(NSString *key in [self allPropertyNames])
{
[dic setValue:[self valueForKey:key] forKey:key];
}
NSLog(@"\n========================= User Detail ==============================\n");
NSLog(@"%@",[dic description]);
NSLog(@"\n=============================================================\n");
}
-(NSMutableDictionary *)getDictionary{
NSMutableDictionary *dic = [[NSMutableDictionary alloc] init];
for(NSString *key in [self allPropertyNames])
{
[dic setValue:[self valueForKey:key] forKey:key];
}
return dic;
}
#pragma mark
#pragma mark - Save and get User details
-(void)saveLoginUserDetail{
NSData *encodedObject = [NSKeyedArchiver archivedDataWithRootObject:self];
[Shared_UserDefault setObject:encodedObject forKey:kUserDefault_SavedUserDetail];
[Shared_UserDefault synchronize];
}
+(UserDetails *)getLoginUserDetail{
NSData *encodedObject = [Shared_UserDefault objectForKey:kUserDefault_SavedUserDetail];
UserDetails *object = [NSKeyedUnarchiver unarchiveObjectWithData:encodedObject];
return object;
}
@end
************************usefull code while add data into model and get data********
NSLog(@"Response %@",result);
NSString *strMessg = [result objectForKey:kMessage];
NSString *status = [NSString stringWithFormat:@"%@",[result
objectForKey:kStatus]];
if([status isEqualToString:@"1"])
{
arryBankList =[[NSMutableArray alloc]init];
NSMutableArray *arrEvents=[result valueForKey:kbankList];
ShareOBJ.isDefaultBank = [result valueForKey:kisDefaultBank];
if ([arrEvents count]>0)
{
for (NSMutableArray *dic in arrEvents)
{
BankList *objBankListDetail =[[BankList alloc]initWithObject:[dic
mutableCopy]];
[arryBankList addObject:objBankListDetail];
}
//display data using model...
BankList *objBankListing =[arryBankList objectAtIndex:indexPath.row];
<form action="<?php echo $_SERVER["PHP_SELF"]; ?>" method="post" enctype="multipart/form-data" id="something" class="uniForm">
<input name="new_image" id="new_image" size="30" type="file" class="fileUpload" />
<button name="submit" type="submit" class="submitButton">Upload Image</button>
</form>
<?php
if(isset($_POST['submit'])){
if (isset ($_FILES['new_image'])){
$imagename = $_FILES['new_image']['name'];
$source = $_FILES['new_image']['tmp_name'];
$target = "images/".$imagename;
$type=$_FILES["new_image"]["type"];
if($type=="image/jpeg" || $type=="image/jpg"){
move_uploaded_file($source, $target);
//orginal image making part
$imagepath = $imagename;
$save = "images/" . $imagepath; //This is the new file you saving
$file = "images/" . $imagepath; //This is the original file
list($width, $height) = getimagesize($file) ;
$modwidth = 1000;
$diff = $width / $modwidth;
$modheight = $height / $diff;
$tn = imagecreatetruecolor($modwidth, $modheight) ;
$image = imagecreatefromjpeg($file) ;
imagecopyresampled($tn, $image, 0, 0, 0, 0, $modwidth, $modheight, $width, $height) ;
echo "Large image: <img src='images/".$imagepath."'><br>";
imagejpeg($tn, $save, 100) ;
//thumbnail image making part
$save = "images/thumb/" . $imagepath; //This is the new file you saving
$file = "images/" . $imagepath; //This is the original file
list($width, $height) = getimagesize($file) ;
$modwidth = 150;
$diff = $width / $modwidth;
$modheight = $height / $diff;
$tn = imagecreatetruecolor($modwidth, $modheight) ;
$image = imagecreatefromjpeg($file) ;
imagecopyresampled($tn, $image, 0, 0, 0, 0, $modwidth, $modheight, $width, $height) ;
//echo "Thumbnail: <img src='images/sml_".$imagepath."'>";
imagejpeg($tn, $save, 100) ;
}
else{
echo "File is not image";
}
}
}
?>
Load image:
BufferedImage bufferedImage = ImageIO.read(file);
Resize it:
private BufferedImage resizeAndCrop(BufferedImage bufferedImage, Integer width, Integer height) {
Mode mode = (double) width / (double) height >= (double) bufferedImage.getWidth() / (double) bufferedImage.getHeight() ? Scalr.Mode.FIT_TO_WIDTH
: Scalr.Mode.FIT_TO_HEIGHT;
bufferedImage = Scalr.resize(bufferedImage, Scalr.Method.ULTRA_QUALITY, mode, width, height);
int x = 0;
int y = 0;
if (mode == Scalr.Mode.FIT_TO_WIDTH) {
y = (bufferedImage.getHeight() - height) / 2;
} else if (mode == Scalr.Mode.FIT_TO_HEIGHT) {
x = (bufferedImage.getWidth() - width) / 2;
}
bufferedImage = Scalr.crop(bufferedImage, x, y, width, height);
return bufferedImage;
}
Using Scalr library:
<dependency>
<groupId>org.imgscalr</groupId>
<artifactId>imgscalr-lib</artifactId>
<version>4.2</version>
</dependency>
I just didn't log out of root before running ./studio.sh All set.
If I understand, what you want to do is disregard the orientation of the UIImage? If so then you could do this:-
//image is your original image
image = [UIImage imageWithCGImage:[image CGImage]
scale:[image scale]
orientation: UIImageOrientationUp];
or in Swift :-
image = UIImage(CGImage: image.CGImage!, scale: image.scale, orientation:.Up)
It solved my cropping issue.. Hope, this is what you're looking for..
You can set selinux to permissive in order to analyze.
# setenforce 0
Selinux will log but permit acesses. So you can check the /var/log/audit/audit.log
for details. Maybe you will need change selinux context. Fot this, you will use chcon
command. If you need, show us your audit.log
to more detailed answer.
Don't forget to enable selinux after you solved the problem. It better keep selinux enforced.
# setenforce 1
$image = imagecreatefromjpeg($_GET['src']);
Needs to be replaced with this:
$image = imagecreatefromjpeg('images/thumbnails/myimage.jpg');
Because imagecreatefromjpeg()
is expecting a string.
This worked for me.
ref:
http://php.net/manual/en/function.imagecreatefromjpeg.php
I had this problem in a project this morning. Make sure you specify the base tag in the head section.
It should be like this:
<head>
<base target="name_of_iframe">
</head>
That way when you click a link on the page it will open up inside of the iframe by default.
Hope that helped.
From the asar documentation
(the use of npx
here is to avoid to install the asar
tool globally with npm install -g asar
)
npx asar extract app.asar destfolder
npx asar extract-file app.asar main.js
You can use text that is only accessible to screen readers by placing it in a span which you hide in an accessible way. Place the x in the CSS which can't be read by screen readers, thus won't confuse, but is visible on the page, and also accessible by keyboard users.
<style>
.hidden {opacity:0; position:absolute; width:0;}
.close {padding:4px 8px; border:1px solid #000; background-color:#fff; cursor:pointer;}
.close:before {content:'\00d7'; color:red; font-size:2em;}
</style>
<button class="close"><span class="hidden">close</span></button>
It works with just this:
.slideContainer {
white-space: nowrap;
}
.slide {
display: inline-block;
width: 600px;
white-space: normal;
}
I did originally have float : left;
and that prevented it from working correctly.
Thanks for posting this solution.
public string MakeRelativePath(string workingDirectory, string fullPath)
{
string result = string.Empty;
int offset;
// this is the easy case. The file is inside of the working directory.
if( fullPath.StartsWith(workingDirectory) )
{
return fullPath.Substring(workingDirectory.Length + 1);
}
// the hard case has to back out of the working directory
string[] baseDirs = workingDirectory.Split(new char[] { ':', '\\', '/' });
string[] fileDirs = fullPath.Split(new char[] { ':', '\\', '/' });
// if we failed to split (empty strings?) or the drive letter does not match
if( baseDirs.Length <= 0 || fileDirs.Length <= 0 || baseDirs[0] != fileDirs[0] )
{
// can't create a relative path between separate harddrives/partitions.
return fullPath;
}
// skip all leading directories that match
for (offset = 1; offset < baseDirs.Length; offset++)
{
if (baseDirs[offset] != fileDirs[offset])
break;
}
// back out of the working directory
for (int i = 0; i < (baseDirs.Length - offset); i++)
{
result += "..\\";
}
// step into the file path
for (int i = offset; i < fileDirs.Length-1; i++)
{
result += fileDirs[i] + "\\";
}
// append the file
result += fileDirs[fileDirs.Length - 1];
return result;
}
This code is probably not bullet-proof but this is what I came up with. It's a little more robust. It takes two paths and returns path B as relative to path A.
example:
MakeRelativePath("c:\\dev\\foo\\bar", "c:\\dev\\junk\\readme.txt")
//returns: "..\\..\\junk\\readme.txt"
MakeRelativePath("c:\\dev\\foo\\bar", "c:\\dev\\foo\\bar\\docs\\readme.txt")
//returns: "docs\\readme.txt"
Just break the loop when you find the element you want to click on it. for example:
List<WebElement> buttons = getButtonElements();
for (WebElement b : buttons) {
if (b.getText().equals("Next"){
b.click();
break;
}
short answer - add following line in the jsp which will define the base
base href="/{root of your application}/"
Try this
q = Session.query(
User, Document, DocumentPermissions,
).filter(
User.email == Document.author,
).filter(
Document.name == DocumentPermissions.document,
).filter(
User.email == 'someemail',
).all()
ArrayDeque
is probably the fastest object-based queue in the JDK; Trove has the TIntQueue
interface, but I don't know where its implementations live.
I'd do it like this:
[id^="product"] {
...
}
Ideally, use a class. This is what classes are for:
<div id="product176" class="product"></div>
<div id="product177" class="product"></div>
<div id="product178" class="product"></div>
And now the selector becomes:
.product {
...
}
To remove all files from a directory, first you need to list all files in the directory using fs.readdir
, then you can use fs.unlink
to remove each file. Also fs.readdir
will give just the file names, you need to concat with the directory name to get the full path.
Here is an example
const fs = require('fs');
const path = require('path');
const directory = 'test';
fs.readdir(directory, (err, files) => {
if (err) throw err;
for (const file of files) {
fs.unlink(path.join(directory, file), err => {
if (err) throw err;
});
}
});
There is a recursive
flag that you can use in rmdir
to remove all the files recursively. See nodejs docs for more information.
const fs = require('fs').promises;
const directory = 'test';
fs.rmdir(directory, { recursive: true })
.then(() => console.log('directory removed!'));
There is an overload of Split that takes strings.
"THExxQUICKxxBROWNxxFOX".Split(new [] { "xx" }, StringSplitOptions.None);
You can use either of these StringSplitOptions
So if the string is "THExxQUICKxxxxBROWNxxFOX", StringSplitOptions.None
will return an empty entry in the array for the "xxxx" part while StringSplitOptions.RemoveEmptyEntries
will not.
The DB Designer Fork project claims that it can generate FireBird sql scripts.
The document for string::npos
says:
npos is a static member constant value with the greatest possible value for an element of type size_t.
As a return value it is usually used to indicate failure.
This constant is actually defined with a value of -1 (for any trait), which because size_t is an unsigned integral type, becomes the largest possible representable value for this type.
You can use the FileWriter(String fileName, boolean append)
constructor if you want to append data to file.
Change your code to this:
output = new BufferedWriter(new FileWriter(my_file_name, true));
From FileWriter javadoc:
Constructs a FileWriter object given a file name. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
new BigInteger(1, myString.getBytes(/*YOUR_CHARSET?*/)).toString(16)
this solved it to me:
sudo apt-get update
sudo apt-get install libglfw3
sudo apt-get install libglfw3-dev
taken from https://github.com/glfw/glfw/issues/808
Mac OS X EL Capitan + MAMP Pro Do this
cd /var
sudo mkdir mysql
sudo chmod 755 mysql
cd mysql
sudo ln -s /Applications/MAMP/tmp/mysql/mysql.sock mysql.sock
Then do this
cd /tmp
sudo ln -s /Applications/MAMP/tmp/mysql/mysql.sock mysql.sock
Hope this saves you some time.
like
is best, or at least easiest.match
is used for regex comparisons.For the first question, why not just use?
SELECT COUNT(*) FROM myTable
to get the count.
And for the second question, the primary key of the row is what should be used to identify a particular row. Don't try and use the row number for that.
If you returned Row_Number() in your main query,
SELECT ROW_NUMBER() OVER (Order by Id) AS RowNumber, Field1, Field2, Field3
FROM User
Then when you want to go 5 rows back then you can take the current row number and use the following query to determine the row with currentrow -5
SELECT us.Id
FROM (SELECT ROW_NUMBER() OVER (ORDER BY id) AS Row, Id
FROM User ) us
WHERE Row = CurrentRow - 5
I ran into a case where I got that error message and had
Foo foo(Bar());
and was basically trying to pass in a temporary Bar object to the Foo constructor. Turns out the compiler was translating this to
Foo foo(Bar(*)());
that is, a function declaration whose name is foo that returns a Foo that takes in an argument -- a function pointer returning a Bar with 0 arguments. When passing in temporaries like this, better to use Bar{}
instead of Bar()
to eliminate ambiguity.
best way to get key/value of object.
let obj = {_x000D_
'key1': 'value1',_x000D_
'key2': 'value2',_x000D_
'key3': 'value3',_x000D_
'key4': 'value4'_x000D_
}_x000D_
Object.keys(obj).map(function(k){ _x000D_
console.log("key with value: "+k +" = "+obj[k]) _x000D_
_x000D_
})_x000D_
_x000D_
It matches p
elements with class some_class
that are directly under a div
.
Any other places you use TimerEventProcessor or Counter?
Anyway, you can not rely on the Event being exactly delivered one per second. The time may vary, and the system will not make sure the average time is correct.
So instead of _Counter, you should use:
// when starting the timer:
DateTime _started = DateTime.UtcNow;
// in TimerEventProcessor:
seconds = (DateTime.UtcNow-started).TotalSeconds;
Label.Text = seconds.ToString();
Note: this does not solve the Problem of TimerEventProcessor being called to often, or _Counter incremented to often. it merely masks it, but it is also the right way to do it.
you have to be aware that when using interface builder
and creating a Xib
(nib) containing one cell that there is also a placeholder
created that points to the class that will be used. Meaning, when you place two UITableViewCell
in one Xib file you possibly run into the exact same trouble causing an *** Assertion failure ...
. The placeholder mechanism doesn't work adn will be confused then. Instead placing different placeholders in one Xib read on..
The most easy solution (even if that seems a bit to simple) is to place one Cell at a time in one Xib. IB will create a placeholder for you and all works as expected then. But this then leads directly to one extra line of code, because then you need to load the correct nib/xib asking for the reuseIdentified Cell where it resides in. So the following example code focuses the use of multiple Cell Indentifiers in one tableview where an Assertion Failure is very common.
// possibly above class implementation
static NSString *firstCellIdentifier = @"firstCellIdentifier";
static NSString *secondCellIdentifier = @"secondCellIdentifier";
// possibly in -(instancetype)init
UINib *firstNib = [UINib nibWithNibName:@"FirstCell" bundle:nil];
[self.tableView registerNib:firstNib forCellReuseIdentifier:firstCellIdentifier];
UINib *secondNib = [UINib nibWithNibName:@"SecondCell" bundle:nil];
[self.tableView registerNib:secondNib forCellReuseIdentifier:secondCellIdentifier];
Another trouble with the use of two CellIdentifier's in one UITableView is that row height and/or section height have to be taken care of. Two cells can have different heights of course.
When registering classes for reuse the code should look different.
The "simple solution" looks also much different when your cells reside inside a Storyboard instead of Xib's. Watch out for the placeholders.
Keep also in mind that interface builder files have version wise variations and need to be set to a version that your targeted OS version supports. Even if you may be lucky that the particular feature you placed in your Xib is not changed since the last IB version and does not throw errors yet. So a Xib made with IB set to be compatible to iOS 13+
but used in a target that is compiled on an earlier version iOS 12.4
will cause also trouble and can end up with Assertion failure.
Nothing, they are synonymous (Response.Write
is simply a shorter way to express the act of writing to the response output).
If you are curious, the implementation of HttpResponse.Write
looks like this:
public void Write(string s)
{
this._writer.Write(s);
}
And the implementation of HttpResponse.Output
is this:
public TextWriter Output
{
get
{
return this._writer;
}
}
So as you can see, Response.Write
and Response.Output.Write
are truly synonymous expressions.
Herman's solution works, but it can be simplified because Sqlite allows to store any value type on any field.
Here is a simpler version that uses one Value
field declared as TEXT
to store any value:
CREATE TEMP TABLE IF NOT EXISTS Variables (Name TEXT PRIMARY KEY, Value TEXT);
INSERT OR REPLACE INTO Variables VALUES ('VarStr', 'Val1');
INSERT OR REPLACE INTO Variables VALUES ('VarInt', 123);
INSERT OR REPLACE INTO Variables VALUES ('VarBlob', x'12345678');
SELECT Value
FROM Variables
WHERE Name = 'VarStr'
UNION ALL
SELECT Value
FROM Variables
WHERE Name = 'VarInt'
UNION ALL
SELECT Value
FROM Variables
WHERE Name = 'VarBlob';
If you're trying to add typings to a destructured object literal, for example in arguments to a function, the syntax is:
function foo({ bar, baz }: { bar: boolean, baz: string }) {
// ...
}
foo({ bar: true, baz: 'lorem ipsum' });
var result = decimal.ToDouble(decimal.Divide(5, 2));
You can also use a while loop:
while (true) {
//your code
}
I'm surprised nobody here has mentioned simply passing and extracting an array. E.g:
function add($arr){
extract($arr, EXTR_REFS);
return $one+$two;
}
$one = 1;
$two = 2;
echo add(compact('one', 'two')); // 3
Of course, this does not provide argument validation. For that, anyone can use my expect function: https://gist.github.com/iautomation/8063fc78e9508ed427d5
Dim sHostName As String
' Get Host Name / Get Computer Name
sHostName = Environ$("computername")
NVL(length(clob_col_name),0) works for me.
The resolution provided by Soheil was successful in my case.
To clarify, the only change I needed to make was with MySQL's server configuration;
bind-address = **INSERT-IP-HERE**
I am using an external MySQL server for my application. It is a basic Debian 7.5 installation with MySQL Server 5.5 - default configuration.
IMPORTANT:
Always backup the original of any configuration files you may modify. Always take care when elevated as super user.
File
/etc/mysql/my.cnf
Line
bind-address = 192.168.0.103 #127.0.0.1
Restart your MySQL Server service:
/usr/sbin/service mysql restart
As you can see, I simply provided the network IP of the server and commented out the default entry. Please note that simply copy and paste my solution will not work for you, unless by some miracle our hosts share the same IP.
Thanks @ Soheil
Simple answer
If you want to match single character, put it inside those brackets [ ]
Examples
...and so on. You can check your regular expresion online on this site: https://regex101.com/
(updated based on comment)
For users with GitHub Enterprise you need to construct URL in following scheme
Invoke-WebRequest http://github.mycompany.com/api/v3/repos/my-org/my-repo/contents/myfiles/file.txt -Headers @{"Authorization"="token 8d795936d2c1b2806587719b9b6456bd16549ad8"}
Details can be found here
http://artisticcheese.blogspot.com/2017/04/how-to-download-individual-files-from.html
You can still use the Authorization header with OAuth 2.0. There is a Bearer type specified in the Authorization header for use with OAuth bearer tokens (meaning the client app simply has to present ("bear") the token). The value of the header is the access token the client received from the Authorization Server.
It's documented in this spec: https://tools.ietf.org/html/rfc6750#section-2.1
E.g.:
GET /resource HTTP/1.1
Host: server.example.com
Authorization: Bearer mF_9.B5f-4.1JqM
Where mF_9.B5f-4.1JqM is your OAuth access token.
./
refers to the current working directory, except in the require()
function. When using require()
, it translates ./
to the directory of the current file called. __dirname
is always the directory of the current file.
For example, with the following file structure
/home/user/dir/files/config.json
{
"hello": "world"
}
/home/user/dir/files/somefile.txt
text file
/home/user/dir/dir.js
var fs = require('fs');
console.log(require('./files/config.json'));
console.log(fs.readFileSync('./files/somefile.txt', 'utf8'));
If I cd
into /home/user/dir
and run node dir.js
I will get
{ hello: 'world' }
text file
But when I run the same script from /home/user/
I get
{ hello: 'world' }
Error: ENOENT, no such file or directory './files/somefile.txt'
at Object.openSync (fs.js:228:18)
at Object.readFileSync (fs.js:119:15)
at Object.<anonymous> (/home/user/dir/dir.js:4:16)
at Module._compile (module.js:432:26)
at Object..js (module.js:450:10)
at Module.load (module.js:351:31)
at Function._load (module.js:310:12)
at Array.0 (module.js:470:10)
at EventEmitter._tickCallback (node.js:192:40)
Using ./
worked with require
but not for fs.readFileSync
. That's because for fs.readFileSync
, ./
translates into the cwd (in this case /home/user/
). And /home/user/files/somefile.txt
does not exist.
select * from xyz where (1=(CASE WHEN @AnnualFeeType = 'All' THEN 1 ELSE 0 END) OR AnnualFeeType = @AnnualFeeType)
pyplot
is a sub-module of matplotlib
which doesn't get imported with a simple import matplotlib
.
>>> import matplotlib
>>> print matplotlib.pyplot
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
AttributeError: 'module' object has no attribute 'pyplot'
>>> import matplotlib.pyplot
>>>
It seems customary to do: import matplotlib.pyplot as plt
at which time you can use the various functions and classes it contains:
p = plt.plot(...)
A delegate is a reference to a method. Whereas objects can easily be sent as parameters into methods, constructor or whatever, methods are a bit more tricky. But every once in a while you might feel the need to send a method as a parameter to another method, and that's when you'll need delegates.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
namespace DelegateApp {
/// <summary>
/// A class to define a person
/// </summary>
public class Person {
public string Name { get; set; }
public int Age { get; set; }
}
class Program {
//Our delegate
public delegate bool FilterDelegate(Person p);
static void Main(string[] args) {
//Create 4 Person objects
Person p1 = new Person() { Name = "John", Age = 41 };
Person p2 = new Person() { Name = "Jane", Age = 69 };
Person p3 = new Person() { Name = "Jake", Age = 12 };
Person p4 = new Person() { Name = "Jessie", Age = 25 };
//Create a list of Person objects and fill it
List<Person> people = new List<Person>() { p1, p2, p3, p4 };
//Invoke DisplayPeople using appropriate delegate
DisplayPeople("Children:", people, IsChild);
DisplayPeople("Adults:", people, IsAdult);
DisplayPeople("Seniors:", people, IsSenior);
Console.Read();
}
/// <summary>
/// A method to filter out the people you need
/// </summary>
/// <param name="people">A list of people</param>
/// <param name="filter">A filter</param>
/// <returns>A filtered list</returns>
static void DisplayPeople(string title, List<Person> people, FilterDelegate filter) {
Console.WriteLine(title);
foreach (Person p in people) {
if (filter(p)) {
Console.WriteLine("{0}, {1} years old", p.Name, p.Age);
}
}
Console.Write("\n\n");
}
//==========FILTERS===================
static bool IsChild(Person p) {
return p.Age < 18;
}
static bool IsAdult(Person p) {
return p.Age >= 18;
}
static bool IsSenior(Person p) {
return p.Age >= 65;
}
}
}
Children:
Jake, 12 years old
Adults:
John, 41 years old
Jane, 69 years old
Jessie, 25 years old
Seniors:
Jane, 69 years old
It's browser dependent. "By default, Internet Explorer has a KeepAliveTimeout value of one minute and an additional limiting factor (ServerInfoTimeout) of two minutes. Either setting can cause Internet Explorer to reset the socket." - from IE support http://support.microsoft.com/kb/813827
Firefox is around the same value I think as well.
Usually though server timeout are set lower than browser timeouts, but at least you can control that and set it higher.
You'd rather handle the timeout though, so that way you can act upon such an event. See this thread: How to detect timeout on an AJAX (XmlHttpRequest) call in the browser?
use this code below as progress.xml:
<layer-list xmlns:android="http://schemas.android.com/apk/res/android">
<item android:id="@android:id/background">
<shape>
<corners android:radius="5dip" />
<gradient
android:startColor="#ff9d9e9d"
android:centerColor="#ff5a5d5a"
android:centerY="0.75"
android:endColor="#ff747674"
android:angle="270"
/>
</shape>
</item>
<item android:id="@android:id/secondaryProgress">
<clip>
<shape>
<solid android:color="#00000000" />
</shape>
</clip>
</item>
<item android:id="@android:id/progress">
<clip>
<shape>
<solid android:color="#00000000" />
</shape>
</clip>
</item>
</layer-list>
where:
after that use it in the layout containing the xml:
<SeekBar
android:id="@+id/myseekbar"
...
android:progressDrawable="@drawable/progress"
/>
you can also customize the thumb by using a custom icon seek_thumb.png:
android:thumb="@drawable/seek_thumb"
.header {_x000D_
position: fixed;_x000D_
top: 0;_x000D_
left: 0;_x000D_
width: 100%;_x000D_
height: 88px;_x000D_
z-index: 10;_x000D_
background: #eeeeee;_x000D_
-webkit-box-shadow: 0 7px 8px rgba(0, 0, 0, 0.12);_x000D_
-moz-box-shadow: 0 7px 8px rgba(0, 0, 0, 0.12);_x000D_
box-shadow: 0 7px 8px rgba(0, 0, 0, 0.12);_x000D_
}_x000D_
_x000D_
.header__content-text {_x000D_
text-align: center;_x000D_
padding: 15px 20px;_x000D_
}_x000D_
_x000D_
.page__content-container {_x000D_
margin: 100px auto;_x000D_
width: 975px;_x000D_
padding: 30px;_x000D_
}
_x000D_
<div class="header">_x000D_
<h1 class="header__content-text">_x000D_
Header content will come here_x000D_
</h1>_x000D_
</div>_x000D_
<div class="page__content-container">_x000D_
<div style="height:600px;">_x000D_
<a href="http://imgur.com/k9hz3">_x000D_
<img src="http://i.imgur.com/k9hz3.jpg" title="Hosted by imgur.com" alt="" />_x000D_
</a>_x000D_
</div>_x000D_
<div style="height:600px;">_x000D_
<a href="http://imgur.com/TXuFQ">_x000D_
<img src="http://i.imgur.com/TXuFQ.jpg" title="Hosted by imgur.com" alt="" />_x000D_
</a>_x000D_
</div>_x000D_
</div>
_x000D_
Fortunately a solution exists. You must add a wrapper for parent and change z-index of this wrapper for example 10, and set z-index for child to -1:
.parent {_x000D_
position: relative;_x000D_
width: 750px;_x000D_
height: 7150px;_x000D_
background: red;_x000D_
border: solid 1px #000;_x000D_
z-index: initial;_x000D_
}_x000D_
_x000D_
.child {_x000D_
position: relative;_x000D_
background-color: blue;_x000D_
z-index: -1;_x000D_
color: white;_x000D_
}_x000D_
_x000D_
.wrapper {_x000D_
position: relative;_x000D_
background: green;_x000D_
z-index: 10;_x000D_
}
_x000D_
<div class="wrapper">_x000D_
<div class="parent">parent parent_x000D_
<div class="child">child child child</div>_x000D_
</div>_x000D_
</div>
_x000D_
As you can see in the below source code, BeanUtils.copyProperties internally uses reflection and there's additional internal cache lookup steps as well which is going to add cost wrt performance
private static void copyProperties(Object source, Object target, @Nullable Class<?> editable,
@Nullable String... ignoreProperties) throws BeansException {
Assert.notNull(source, "Source must not be null");
Assert.notNull(target, "Target must not be null");
Class<?> actualEditable = target.getClass();
if (editable != null) {
if (!editable.isInstance(target)) {
throw new IllegalArgumentException("Target class [" + target.getClass().getName() +
"] not assignable to Editable class [" + editable.getName() + "]");
}
actualEditable = editable;
}
**PropertyDescriptor[] targetPds = getPropertyDescriptors(actualEditable);**
List<String> ignoreList = (ignoreProperties != null ? Arrays.asList(ignoreProperties) : null);
for (PropertyDescriptor targetPd : targetPds) {
Method writeMethod = targetPd.getWriteMethod();
if (writeMethod != null && (ignoreList == null || !ignoreList.contains(targetPd.getName()))) {
PropertyDescriptor sourcePd = getPropertyDescriptor(source.getClass(), targetPd.getName());
if (sourcePd != null) {
Method readMethod = sourcePd.getReadMethod();
if (readMethod != null &&
ClassUtils.isAssignable(writeMethod.getParameterTypes()[0], readMethod.getReturnType())) {
try {
if (!Modifier.isPublic(readMethod.getDeclaringClass().getModifiers())) {
readMethod.setAccessible(true);
}
Object value = readMethod.invoke(source);
if (!Modifier.isPublic(writeMethod.getDeclaringClass().getModifiers())) {
writeMethod.setAccessible(true);
}
writeMethod.invoke(target, value);
}
catch (Throwable ex) {
throw new FatalBeanException(
"Could not copy property '" + targetPd.getName() + "' from source to target", ex);
}
}
}
}
}
}
So it's better to use plain setters given the cost reflection
You can use the finish
command.
finish
: Continue running until just after function in the selected stack frame returns. Print the returned value (if any). This command can be abbreviated asfin
.
(See 5.2 Continuing and Stepping.)
I've tried to make a synthesis of all solutions and created a [ButtenHandler] attribute that makes it easy to handle multiple buttons on a form.
I've described it on CodeProject Multiple parameterized (localizable) form buttons in ASP.NET MVC.
To handle the simple case of this button:
<button type="submit" name="AddDepartment">Add Department</button>
You'll have something like the following action method:
[ButtonHandler()]
public ActionResult AddDepartment(Company model)
{
model.Departments.Add(new Department());
return View(model);
}
Notice how the name of the button matches the name of the action method. The article also describes how to have buttons with values and buttons with indexes.
The right answer is:
android {
....
....
sourceSets {
main.java.srcDirs += 'src/main/<YOUR DIRECTORY>'
}
}
Furthermore, if your external source directory is not under src/main
, you could use a relative path like this:
sourceSets {
main.java.srcDirs += 'src/main/../../../<YOUR DIRECTORY>'
}
You can try this
find . -type d -name .git -exec sh -c "cd \"{}\"/../ && pwd && git pull" \;
Also, you can add your customized output by adding one more && argument like.
find . -type d -name .git -exec sh -c "cd \"{}\"/../ && pwd && git pull && git status" \;
This post is just to mention an additional option. In case you need to set custom R libs in your Linux shell script you may easily do so by
export R_LIBS="~/R/lib"
See R admin guide on complete list of options.
In my case, I don't have control over server setting, but I know it's expecting "application/json" for "Content-Type". I did this on the iOS client side:
manager.requestSerializer = [AFJSONRequestSerializer serializer];
I was using an outdated version of Maven (3.0.3 and 3.1). These older versions no longer supports http repositories (as mentioned above). Upgrading to Maven 3.6 was the fix for me.
a simple windows search for android-sdk
should help you find it, assuming you named it that. You also might just wanna try sdk
Java has Currency
class that represents the ISO 4217 currency codes.
BigDecimal
is the best type for representing currency decimal values.
Joda Money has provided a library to represent money.
I had this problem cause i had already origin remote defined locally. So just change "origin" into another name:
git remote add originNew https://github.com/UAwebM...
git push -u originNew
or u can remove your local origin. to check your remote name type:
git remote
to remove remote - log in your clone repository and type:
git remote remove origin(depending on your remote's name)
from item in db.vw_Dropship_OrderItems
where (listStatus != null ? listStatus.Contains(item.StatusCode) : true) &&
(listMerchants != null ? listMerchants.Contains(item.MerchantId) : true)
select item;
Might give strange behavior if both listMerchants and listStatus are both null.
You could always use "%p" in order to display 8 bit hex numbers.
int main (void)
{
uint8_t a;
uint32_t b;
a=15;
b=a<<28;
printf("%p", b);
return 0;
}
Output:
0xf0000000
I had similar situation , where i had to wait till all child threads complete its execution then only i could get the status result for each of them .. hence i needed to wait till all child thread completed.
below is my code where i did multi-threading using
public static void main(String[] args) {
List<RunnerPojo> testList = ExcelObject.getTestStepsList();//.parallelStream().collect(Collectors.toList());
int threadCount = ConfigFileReader.getInstance().readConfig().getParallelThreadCount();
System.out.println("Thread count is : ========= " + threadCount); // 5
ExecutorService threadExecutor = new DriverScript().threadExecutor(testList, threadCount);
boolean isProcessCompleted = waitUntilCondition(() -> threadExecutor.isTerminated()); // Here i used waitUntil condition
if (isProcessCompleted) {
testList.forEach(x -> {
System.out.println("Test Name: " + x.getTestCaseId());
System.out.println("Test Status : " + x.getStatus());
System.out.println("======= Test Steps ===== ");
x.getTestStepsList().forEach(y -> {
System.out.println("Step Name: " + y.getDescription());
System.out.println("Test caseId : " + y.getTestCaseId());
System.out.println("Step Status: " + y.getResult());
System.out.println("\n ============ ==========");
});
});
}
Below method is for distribution of list with parallel proccessing
// This method will split my list and run in a parallel process with mutliple threads
private ExecutorService threadExecutor(List<RunnerPojo> testList, int threadSize) {
ExecutorService exec = Executors.newFixedThreadPool(threadSize);
testList.forEach(tests -> {
exec.submit(() -> {
driverScript(tests);
});
});
exec.shutdown();
return exec;
}
This is my wait until method: here you can wait till your condition satisfies within do while loop . in my case i waited for some max timeout .
this will keep checking until your threadExecutor.isTerminated()
is true
with polling period of 5 sec.
static boolean waitUntilCondition(Supplier<Boolean> function) {
Double timer = 0.0;
Double maxTimeOut = 20.0;
boolean isFound;
do {
isFound = function.get();
if (isFound) {
break;
} else {
try {
Thread.sleep(5000); // Sleeping for 5 sec (main thread will sleep for 5 sec)
} catch (InterruptedException e) {
e.printStackTrace();
}
timer++;
System.out.println("Waiting for condition to be true .. waited .." + timer * 5 + " sec.");
}
} while (timer < maxTimeOut + 1.0);
return isFound;
}
Often when people are looking for "timezones", what will suffice is just "UTC offset". e.g., their server is in UTC+5 and they want to know that their client is running in UTC-8.
In plain old javascript (new Date()).getTimezoneOffset()/60
will return the current number of hours offset from UTC.
It's worth noting a possible "gotcha" in the sign of the getTimezoneOffset()
return value (from MDN docs):
The time-zone offset is the difference, in minutes, between UTC and local time. Note that this means that the offset is positive if the local timezone is behind UTC and negative if it is ahead. For example, for time zone UTC+10:00 (Australian Eastern Standard Time, Vladivostok Time, Chamorro Standard Time), -600 will be returned.
However, I recommend you use the day.js for time/date related Javascript code. In which case you can get an ISO 8601 formatted UTC offset by running:
> dayjs().format("Z")
"-08:00"
It probably bears mentioning that the client can easily falsify this information.
(Note: this answer originally recommended https://momentjs.com/, but dayjs is a more modern, smaller alternative.)
java.sql.Timestamp
extends java.util.Date
. You can do:
String s = new SimpleDateFormat("MM/dd/yyyy").format(myTimestamp);
Or to also include time:
String s = new SimpleDateFormat("MM/dd/yyyy HH:mm:ss").format(myTimestamp);
In My Visual Studio 2015, I ensured that the offending Visual Studio Project's Reference Paths List is empty:
Just found this today whilst reading the source code. So $.tooltip(string)
calls any function within the Tooltip
class. And if you look at Tooltip.fixTitle
, it fetches the data-original-title
attribute and replaces the title value with it.
So we simply do:
$(element).tooltip('hide')
.attr('data-original-title', newValue)
.tooltip('fixTitle')
.tooltip('show');
and sure enough, it updates the title, which is the value inside the tooltip.
A shorter way:
$(element).attr('title', 'NEW_TITLE')
.tooltip('fixTitle')
.tooltip('show');
This error happens because the plist file of IntelliJ IDEA requires Java version 1.6*. To solve this problem, replace the 1.6* with 1.8*.
<key>JVMOptions</key>
<dict>
<key>ClassPath</key>
...
<key>JVMVersion</key>
<string>1.8*</string>
<key>MainClass</key>
<string>com.intellij.idea.Main</string>
<key>Properties</key>
<dict>
Same problem here.
Fixed!
I installed the correct Java stuff, all for 64 bit, because my system is x64, and nothing happened. So I went to C:\Users\[my name]
and deleted the directory .android
that has been created the first time the SDK ran, apparently with some wrong configuration.
Then it worked. You can try that. Delete that folder or just move it to the desktop and run the SDK.
Mobaxterme had a UI interface for it
setting > configuration > SSH > SSH Agent > [check] Use internal SSH agent "moboAgent" > add [your id_rsa and restart mobaxterme to set changes]
So many problems in so few lines. I probably forget some:
So
#include <stdio.h>
int main(int argc, char* argv[])
{
char const* const fileName = argv[1]; /* should check that argc > 1 */
FILE* file = fopen(fileName, "r"); /* should check the result */
char line[256];
while (fgets(line, sizeof(line), file)) {
/* note that fgets don't strip the terminating \n, checking its
presence would allow to handle lines longer that sizeof(line) */
printf("%s", line);
}
/* may check feof here to make a difference between eof and io failure -- network
timeout for instance */
fclose(file);
return 0;
}
You can use simple jQuery jPut plugin
http://plugins.jquery.com/jput/
<script>
$(document).ready(function(){
var json = [{"name": "name1","email":"[email protected]"},{"name": "name2","link":"[email protected]"}];
//while running this code the template will be appended in your div with json data
$("#tbody").jPut({
jsonData:json,
//ajax_url:"youfile.json", if you want to call from a json file
name:"tbody_template",
});
});
</script>
<table jput="t_template">
<tbody jput="tbody_template">
<tr>
<td>{{name}}</td>
<td>{{email}}</td>
</tr>
</tbody>
</table>
<table>
<tbody id="tbody">
</tbody>
</table>
just install the database driver:
apt-get install php5-pgsql php5-mysql php5-sqlite ... and so on ...
and be happy!
What worked for me:
Button b = new Button(new ContextThemeWrapper(this, R.style.ButtonText), null, 0);
AND
I had same problem and I solved using this code
HTML
<span id="current"></span><br>
<input type="number" id="n" value="5" step=".5" />
You can add just 3 first lines the others parts is optional.
$('#n').on('change paste', function () {
$("#current").html($(this).val())
});
// here when click on spinner to change value, call trigger change
$(".input-group-btn-vertical").click(function () {
$("#n").trigger("change");
});
// you can use this to block characters non numeric
$("#n").keydown(function (e) {
// Allow: backspace, delete, tab, escape, enter and .
if ($.inArray(e.keyCode, [46, 8, 9, 27, 13, 110, 190]) !== -1 || (e.keyCode === 65 && e.ctrlKey === true) || (e.keyCode >= 35 && e.keyCode <= 40))
return;
if ((e.shiftKey || (e.keyCode < 48 || e.keyCode > 57)) && (e.keyCode < 96 || e.keyCode > 105))
e.preventDefault();
});
Example here : http://jsfiddle.net/XezmB/1303/
You can do it using Date.parse() Method.
Date.parse($("#yourCustomDate).val())
Date.parse("03.03.2016") output-> 1456959600000
Date.parse("2015-12-12") output-> 1449878400000
I got the same issue and after a lot of time spent on the search I found the solution
Just change your method especially // DownloadsProvider part
getpath()
to
@SuppressLint("NewApi") public static String getPath(final Context context, final Uri uri) {
final boolean isKitKat = Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT;
// DocumentProvider
if (isKitKat && DocumentsContract.isDocumentUri(context, uri)) {
// ExternalStorageProvider
if (isExternalStorageDocument(uri)) {
final String docId = DocumentsContract.getDocumentId(uri);
final String[] split = docId.split(":");
final String type = split[0];
// This is for checking Main Memory
if ("primary".equalsIgnoreCase(type)) {
if (split.length > 1) {
return Environment.getExternalStorageDirectory() + "/" + split[1];
} else {
return Environment.getExternalStorageDirectory() + "/";
}
// This is for checking SD Card
} else {
return "storage" + "/" + docId.replace(":", "/");
}
}
// DownloadsProvider
else if (isDownloadsDocument(uri)) {
String fileName = getFilePath(context, uri);
if (fileName != null) {
return Environment.getExternalStorageDirectory().toString() + "/Download/" + fileName;
}
String id = DocumentsContract.getDocumentId(uri);
if (id.startsWith("raw:")) {
id = id.replaceFirst("raw:", "");
File file = new File(id);
if (file.exists())
return id;
}
final Uri contentUri = ContentUris.withAppendedId(Uri.parse("content://downloads/public_downloads"), Long.valueOf(id));
return getDataColumn(context, contentUri, null, null);
}
// MediaProvider
else if (isMediaDocument(uri)) {
final String docId = DocumentsContract.getDocumentId(uri);
final String[] split = docId.split(":");
final String type = split[0];
Uri contentUri = null;
if ("image".equals(type)) {
contentUri = MediaStore.Images.Media.EXTERNAL_CONTENT_URI;
} else if ("video".equals(type)) {
contentUri = MediaStore.Video.Media.EXTERNAL_CONTENT_URI;
} else if ("audio".equals(type)) {
contentUri = MediaStore.Audio.Media.EXTERNAL_CONTENT_URI;
}
final String selection = "_id=?";
final String[] selectionArgs = new String[]{
split[1]
};
return getDataColumn(context, contentUri, selection, selectionArgs);
}
}
// MediaStore (and general)
else if ("content".equalsIgnoreCase(uri.getScheme())) {
// Return the remote address
if (isGooglePhotosUri(uri))
return uri.getLastPathSegment();
return getDataColumn(context, uri, null, null);
}
// File
else if ("file".equalsIgnoreCase(uri.getScheme())) {
return uri.getPath();
}
return null;
}
For more solution click on the link here
https://gist.github.com/HBiSoft/15899990b8cd0723c3a894c1636550a8
I hope will do the same for you!
You won't find the component if it hasn't been installed.
In Visual Studio 2019 go to:
Tools > Get Tools and Features > Select the Individual Components tab > Type wcf
in the search box and install it.
This installs the component, and you should be able to load it from the command prompt or other methods suggested in the answer.
I fixed it with Datejs
This is alerting the first day:
var fd = Date.today().clearTime().moveToFirstDayOfMonth();
var firstday = fd.toString("MM/dd/yyyy");
alert(firstday);
This is for the last day:
var ld = Date.today().clearTime().moveToLastDayOfMonth();
var lastday = ld.toString("MM/dd/yyyy");
alert(lastday);
I created a Class in the Models directory called: myData with the following code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Data.Entity;
namespace Vidly.Models
{
public class MyDbContext : DbContext
{
public MyDbContext()
{
}
}
}
rebuilt the app with: control-shift-b
then ran the following in the nuGet Console:
Enable-Migrations -StartUpProjectName Vidly -ContextTypeName Vidly.Models.MyDbContext -Verbose
the Console returned:
Using StartUp project 'Vidly'. Using NuGet project 'Vidly'. Checking if the context targets an existing database... Code First Migrations enabled for project Vidly. Enable-Migrations -StartUpProjectName Vidly -ContextTypeName Vidly.Models.myData -Verbose
And the FrameWork created a Migrations directory and wrote a Configuration.cs template in there with the following code:
namespace Vidly.Migrations
{
using System;
using System.Data.Entity;
using System.Data.Entity.Migrations;
using System.Linq;
internal sealed class Configuration : DbMigrationsConfiguration<Vidly.Models.MyDbContext>
{
public Configuration()
{
AutomaticMigrationsEnabled = false;
}
protected override void Seed(Vidly.Models.MyDbContext context)
{
// This method will be called after migrating to the latest version.
// You can use the DbSet<T>.AddOrUpdate() helper extension method
// to avoid creating duplicate seed data.
}
}
}
You want List::GetRange(firstIndex, count). See http://msdn.microsoft.com/en-us/library/21k0e39c.aspx
// I have a List called list
List sublist = list.GetRange(5, 5); // (gets elements 5,6,7,8,9)
List anotherSublist = list.GetRange(0, 4); // gets elements 0,1,2,3)
Is that what you're after?
If you're looking to delete the sublist items from the original list, you can then do:
// list is our original list
// sublist is our (newly created) sublist built from GetRange()
foreach (Type t in sublist)
{
list.Remove(t);
}
Because you are passing a string as the second argument to the date function, which should be an integer.
string date ( string $format [, int $timestamp = time() ] )
Try strtotime which will Parse about any English textual datetime description into a Unix timestamp (integer):
date("d", strtotime($_GET['start_date']));
See http://api.jquery.com/jQuery.ajax/, there's mention of datatype and contentType there.
They are both used in the request to the server so the server knows what kind of data to receive/send.
Maybe EXISTS
can help.
and exists (select 1 from @DocumentNames where pcd.Name like DocName+'%' or CD.DocumentName like DocName+'%')
Another option is to use IO.FileInfo
which gives you so much file info it make life easier just using this type:
PS > mkdir C:\Temp
PS > dir C:\Temp\
PS > [IO.FileInfo] $foo = 'C:\Temp\foo.txt'
PS > $foo.Exists
False
PS > New-TemporaryFile | Move-Item -Destination C:\Temp\foo.txt
PS > $foo.Refresh()
PS > $foo.Exists
True
PS > $foo | Select-Object *
Mode : -a----
VersionInfo : File: C:\Temp\foo.txt
InternalName:
OriginalFilename:
FileVersion:
FileDescription:
Product:
ProductVersion:
Debug: False
Patched: False
PreRelease: False
PrivateBuild: False
SpecialBuild: False
Language:
BaseName : foo
Target : {}
LinkType :
Length : 0
DirectoryName : C:\Temp
Directory : C:\Temp
IsReadOnly : False
FullName : C:\Temp\foo.txt
Extension : .txt
Name : foo.txt
Exists : True
CreationTime : 2/27/2019 8:57:33 AM
CreationTimeUtc : 2/27/2019 1:57:33 PM
LastAccessTime : 2/27/2019 8:57:33 AM
LastAccessTimeUtc : 2/27/2019 1:57:33 PM
LastWriteTime : 2/27/2019 8:57:33 AM
LastWriteTimeUtc : 2/27/2019 1:57:33 PM
Attributes : Archive
I had the same error. In my case, using Appium, I had two versions of ADB
$ /usr/local/bin/adb
version 36
and
$ /Users/user/Library/Android/sdk/platform-tools/adb
version 39
The solution was:
be sure that your $PATH in bash_profile is pointing to: /Users/user/Library/Android/sdk/platform-tools/
stop the adb server: adb kill-server
and check Appium is stopped.
delete the adb version 36 (or you can rename it to have a backup): rm /usr/local/bin/adb
start adb server: adb start-server
or just starting Appium
Basically an XSD file defines how the XML file is going to look like. It's a Schema file which defines the structure of the XML file. So it specifies what the possible fields are and what size they are going to be.
An XML file is an instance of XSD as it uses the rules defined in the XSD.
a
is a pointer. You need to use->
, not .
test
is a non-destructive and
, it doesn't return the result of the operation but it sets the flags register accordingly. To know what it really tests for you need to check the following instruction(s). Often out is used to check a register against 0, possibly coupled with a jz
conditional jump.
i have been working on Apachi Axis1.1 and Axis2.0 and JAX-WS but i would suggest you must JAX-WS because it allow you make wsdl in any format , i was making operation as GetInquiry() in Apache Axis2 it did not allow me to Start Operation name in Upper Case , so i find it not good , so i would suggest you must use JAX-WS
Not possible, per MSDN:
You can have the same code execute for multiple trigger types, but the syntax does not allow for multiple code blocks in one trigger:
Trigger on an INSERT, UPDATE, or DELETE statement to a table or view (DML Trigger)
CREATE TRIGGER [ schema_name . ]trigger_name ON { table | view } [ WITH <dml_trigger_option> [ ,...n ] ] { FOR | AFTER | INSTEAD OF } { [ INSERT ] [ , ] [ UPDATE ] [ , ] [ DELETE ] } [ NOT FOR REPLICATION ] AS { sql_statement [ ; ] [ ,...n ] | EXTERNAL NAME <method specifier [ ; ] > }
jQuery UI draggable and droppable are the two plugins I would use to achieve this effect. As for the insertion marker, I would investigate modifying the div
(or container) element that was about to have content dropped into it. It should be possible to modify the border in some way or add a JavaScript/jQuery listener that listens for the hover (element about to be dropped) event and modifies the border or adds an image of the insertion marker in the right place.
Update November 2020
A website is now online with all the TSDoc syntax available (and that's awesome): https://tsdoc.org/
For reference, old answer:
The right syntax is now the one used by TSDoc. It will allow you to have your comments understood by Visual Studio Code or other documentation tools.
A good overview of the syntax is available here and especially here. The precise spec should be "soon" written up.
Another file worth checking out is this one where you will see useful standard tags.
Note: you should not use JSDoc, as explained on TSDoc main page: Why can't JSDoc be the standard? Unfortunately, the JSDoc grammar is not rigorously specified but rather inferred from the behavior of a particular implementation. The majority of the standard JSDoc tags are preoccupied with providing type annotations for plain JavaScript, which is an irrelevant concern for a strongly-typed language such as TypeScript. TSDoc addresses these limitations while also tackling a more sophisticated set of goals.
Actually ngAfterViewInit()
will initiate only once when the component initiate.
If you really want a event triggers after the HTML element renter on the screen then you can use ngAfterViewChecked()
The problem is not that Bar and Bah have to copy 387 constructors, the problem is that Foo has 387 constructors. Foo clearly does too many things - refactor quick! Also, unless you have a really good reason to have values set in the constructor (which, if you provide a parameterless constructor, you probably don't), I'd recommend using property getting/setting.
sys.argv is a list containing the script path and command line arguments; i.e. sys.argv[0] is the path of the script you're running and all following members are arguments.
For those of us using non-ISO standard date formats, like civilian vernacular 01/01/2001 (mm/dd/YYYY), including time in a 12hour date format with am/pm marks, the following function will return a valid Date object:
function convertDate(date) {
// # valid js Date and time object format (YYYY-MM-DDTHH:MM:SS)
var dateTimeParts = date.split(' ');
// # this assumes time format has NO SPACE between time and am/pm marks.
if (dateTimeParts[1].indexOf(' ') == -1 && dateTimeParts[2] === undefined) {
var theTime = dateTimeParts[1];
// # strip out all except numbers and colon
var ampm = theTime.replace(/[0-9:]/g, '');
// # strip out all except letters (for AM/PM)
var time = theTime.replace(/[[^a-zA-Z]/g, '');
if (ampm == 'pm') {
time = time.split(':');
// # if time is 12:00, don't add 12
if (time[0] == 12) {
time = parseInt(time[0]) + ':' + time[1] + ':00';
} else {
time = parseInt(time[0]) + 12 + ':' + time[1] + ':00';
}
} else { // if AM
time = time.split(':');
// # if AM is less than 10 o'clock, add leading zero
if (time[0] < 10) {
time = '0' + time[0] + ':' + time[1] + ':00';
} else {
time = time[0] + ':' + time[1] + ':00';
}
}
}
// # create a new date object from only the date part
var dateObj = new Date(dateTimeParts[0]);
// # add leading zero to date of the month if less than 10
var dayOfMonth = (dateObj.getDate() < 10 ? ("0" + dateObj.getDate()) : dateObj.getDate());
// # parse each date object part and put all parts together
var yearMoDay = dateObj.getFullYear() + '-' + (dateObj.getMonth() + 1) + '-' + dayOfMonth;
// # finally combine re-formatted date and re-formatted time!
var date = new Date(yearMoDay + 'T' + time);
return date;
}
Usage:
date = convertDate('11/15/2016 2:00pm');
This happened for me when I was trying to stash my changes, but then my changes had conflicts with my branch's current state.
So I did git reset --mixed
and then resolved the git conflict and stashed again.
UPDATE yourtable
SET url = REPLACE(url, 'http://domain1.com/images/', 'http://domain2.com/otherfolder/')
WHERE url LIKE ('http://domain1.com/images/%');
relevant docs: http://dev.mysql.com/doc/refman/5.5/en/string-functions.html#function_replace
set datestr=%date%
set result=%datestr:/=-%
@echo %result%
pause
i add this shell script to convert jsp files from IS
#!/bin/sh
###############################################
## this script file must be placed in the parent
## folder of the to folders "in" and "out"
## in contain the input jsp files
## out will containt the generated jsp files
##
###############################################
find in/ -name *.jsp |
while read line; do
outpath=`echo $line | sed -e 's/in/out/'` ;
parentdir=`echo $outpath | sed -e 's/[^\/]*\.jsp$//'` ;
mkdir -p $parentdir
echo $outpath ;
iconv -t UTF-8 -f ISO-8859-1 -o $outpath $line ;
done
The answer, in a few words
In your example, itsProblem
is a local variable.
Your must use self
to set and get instance variables. You can set it in the __init__
method. Then your code would be:
class Example(object):
def __init__(self):
self.itsProblem = "problem"
theExample = Example()
print(theExample.itsProblem)
But if you want a true class variable, then use the class name directly:
class Example(object):
itsProblem = "problem"
theExample = Example()
print(theExample.itsProblem)
print (Example.itsProblem)
But be careful with this one, as theExample.itsProblem
is automatically set to be equal to Example.itsProblem
, but is not the same variable at all and can be changed independently.
Some explanations
In Python, variables can be created dynamically. Therefore, you can do the following:
class Example(object):
pass
Example.itsProblem = "problem"
e = Example()
e.itsSecondProblem = "problem"
print Example.itsProblem == e.itsSecondProblem
prints
True
Therefore, that's exactly what you do with the previous examples.
Indeed, in Python we use self
as this
, but it's a bit more than that. self
is the the first argument to any object method because the first argument is always the object reference. This is automatic, whether you call it self
or not.
Which means you can do:
class Example(object):
def __init__(self):
self.itsProblem = "problem"
theExample = Example()
print(theExample.itsProblem)
or:
class Example(object):
def __init__(my_super_self):
my_super_self.itsProblem = "problem"
theExample = Example()
print(theExample.itsProblem)
It's exactly the same. The first argument of ANY object method is the current object, we only call it self
as a convention. And you add just a variable to this object, the same way you would do it from outside.
Now, about the class variables.
When you do:
class Example(object):
itsProblem = "problem"
theExample = Example()
print(theExample.itsProblem)
You'll notice we first set a class variable, then we access an object (instance) variable. We never set this object variable but it works, how is that possible?
Well, Python tries to get first the object variable, but if it can't find it, will give you the class variable. Warning: the class variable is shared among instances, and the object variable is not.
As a conclusion, never use class variables to set default values to object variables. Use __init__
for that.
Eventually, you will learn that Python classes are instances and therefore objects themselves, which gives new insight to understanding the above. Come back and read this again later, once you realize that.
Sounds like an ideal application for RegEx -- an engine designed for fast text manipulation. In this case:
Regex.Replace("He\"ll,o Wo'r.ld", "[@,\\.\";'\\\\]", string.Empty)
Like the other answers, it's impossible. Here is the comment about breaker in underscore underscore issue #21
Vulgo has the right idea on this thread. I believe his solution is the easiest of the bunch, although his answer could have been a little more in-depth. Here is something that worked for me. I have provided an example.
<h1 id="hello1">Hello World</h1>
<h2 id="hello2">Random</h2>
<button id="click">Click To Hide</button>
<script>
document.getElementById('click').addEventListener('click', function(){
doStuff();
});
function doStuff() {
for(var i=1; i<=2; i++){
var el = document.getElementById("hello" + i);
el.style.display = 'none';
}
}
</script>
Obviously just change the integers in the for loop to account for however many elements you are targeting, which in this example was 2.
You can use a CROSS JOIN
:
SELECT *
FROM ( SELECT SUM(Fdays) AS fDaysSum
FROM tblFieldDays
WHERE tblFieldDays.NameCode=35
AND tblFieldDays.WeekEnding=1) A -- use you real query here
CROSS JOIN (SELECT SUM(CHdays) AS hrsSum
FROM tblChargeHours
WHERE tblChargeHours.NameCode=35
AND tblChargeHours.WeekEnding=1) B -- use you real query here
If you are trying to do basic auth, you can try this:
const username = ''
const password = ''
const token = Buffer.from(`${username}:${password}`, 'utf8').toString('base64')
const url = 'https://...'
const data = {
...
}
axios.post(url, data, {
headers: {
'Authorization': `Basic ${token}`
},
})
This worked for me. Hope that helps
It will likely have been solved by now, but I ran accross this and figured to give my input
=COUNTIF(a2:a51;"*iPad*")
The important thing is that separating parameters in google docs is using a ;
and not a ,
I know this answer comes a little late but I recently faced a similar problem. I wanted to trigger an event on a nested component. I had a list with radio and check box type widgets (they were divs that behaved like checkboxes and/or radio buttons) and in some other place in the application, if someone closed a toolbox, I needed to uncheck one.
I found a pretty simple solution, not sure if this is best practice but it works.
var event = new MouseEvent('click', {
'view': window,
'bubbles': true,
'cancelable': false
});
var node = document.getElementById('nodeMyComponentsEventIsConnectedTo');
node.dispatchEvent(event);
This triggered the click event on the domNode and my handler attached via react was indeed called so it behaves like I would expect if someone clicked on the element. I have not tested onChange but it should work, and not sure how this will fair in really old versions of IE but I believe the MouseEvent is supported in at least IE9 and up.
I eventually moved away from this for my particular use case because my component was very small (only a part of my application used react since i'm still learning it) and I could achieve the same thing another way without getting references to dom nodes.
UPDATE:
As others have stated in the comments, it is better to use this.refs.refname
to get a reference to a dom node. In this case, refname is the ref you attached to your component via <MyComponent ref='refname' />
.
The biggest problem with a batch script is handling rollback when the user clicks cancel (or something goes wrong during your install). The correct way to handle this scenario is to create a CustomAction that adds temporary rows to the RemoveFiles table. That way the Windows Installer handles the rollback cases for you. It is insanely simpler when you see the solution.
Anyway, to have an action only execute during uninstall add a Condition element with:
REMOVE ~= "ALL"
the ~= says compare case insensitive (even though I think ALL is always uppercaesd). See the MSI SDK documentation about Conditions Syntax for more information.
PS: There has never been a case where I sat down and thought, "Oh, batch file would be a good solution in an installation package." Actually, finding an installation package that has a batch file in it would only encourage me to return the product for a refund.
The -m
switch of PuTTY takes a path to a script file as an argument, not a command.
Reference: https://the.earth.li/~sgtatham/putty/latest/htmldoc/Chapter3.html#using-cmdline-m
So you have to save your command (command_run
) to a plain text file (e.g. c:\path\command.txt
) and pass that to PuTTY:
putty.exe -ssh user@host -pw password -m c:\path\command.txt
Though note that you should use Plink (a command-line connection tool from PuTTY suite). It's a console application, so you can redirect its output to a file (what you cannot do with PuTTY).
A command-line syntax is identical, an output redirection added:
plink.exe -ssh user@host -pw password -m c:\path\command.txt > output.txt
See Using the command-line connection tool Plink.
And with Plink, you can actually provide the command directly on its command-line:
plink.exe -ssh user@host -pw password command > output.txt
Similar questions:
Automating running command on Linux from Windows using PuTTY
Executing command in Plink from a batch file
I think your problem is that
int selection = scanner.nextInt();
reads just the number, not the end of line or anything after the number. When you declare
String sentence = scanner.nextLine();
This reads the remainder of the line with the number on it (with nothing after the number I suspect)
Try placing a scanner.nextLine(); after each nextInt() if you intend to ignore the rest of the line.
You can actually use localhost:8000
to connect to your machine's localhost by running below command each time when you run your emulator (tested on Mac only):
adb reverse tcp:8000 tcp:8000
Just put it to Android Studio terminal.
It basically sets up a reverse proxy in which a http server running on your phone accepts connections on a port and wires them to your computer or vice versa.
To force LF line endings for all text files, you can create .gitattributes
file in top-level of your repository with the following lines (change as desired):
# Ensure all C and PHP files use LF.
*.c eol=lf
*.php eol=lf
which ensures that all files that Git considers to be text files have normalized (LF
) line endings in the repository (normally core.eol
configuration controls which one do you have by default).
Based on the new attribute settings, any text files containing CRLFs should be normalized by Git. If this won't happen automatically, you can refresh a repository manually after changing line endings, so you can re-scan and commit the working directory by the following steps (given clean working directory):
$ echo "* text=auto" >> .gitattributes
$ rm .git/index # Remove the index to force Git to
$ git reset # re-scan the working directory
$ git status # Show files that will be normalized
$ git add -u
$ git add .gitattributes
$ git commit -m "Introduce end-of-line normalization"
or as per GitHub docs:
git add . -u
git commit -m "Saving files before refreshing line endings"
git rm --cached -r . # Remove every file from Git's index.
git reset --hard # Rewrite the Git index to pick up all the new line endings.
git add . # Add all your changed files back, and prepare them for a commit.
git commit -m "Normalize all the line endings" # Commit the changes to your repository.
See also: @Charles Bailey post.
In addition, if you would like to exclude any files to not being treated as a text, unset their text attribute, e.g.
manual.pdf -text
Or mark it explicitly as binary:
# Denote all files that are truly binary and should not be modified.
*.png binary
*.jpg binary
To see some more advanced git normalization file, check .gitattributes
at Drupal core:
# Drupal git normalization
# @see https://www.kernel.org/pub/software/scm/git/docs/gitattributes.html
# @see https://www.drupal.org/node/1542048
# Normally these settings would be done with macro attributes for improved
# readability and easier maintenance. However macros can only be defined at the
# repository root directory. Drupal avoids making any assumptions about where it
# is installed.
# Define text file attributes.
# - Treat them as text.
# - Ensure no CRLF line-endings, neither on checkout nor on checkin.
# - Detect whitespace errors.
# - Exposed by default in `git diff --color` on the CLI.
# - Validate with `git diff --check`.
# - Deny applying with `git apply --whitespace=error-all`.
# - Fix automatically with `git apply --whitespace=fix`.
*.config text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.css text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.dist text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.engine text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.html text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=html
*.inc text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.install text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.js text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.json text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.lock text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.map text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.md text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.module text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.php text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.po text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.profile text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.script text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.sh text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.sql text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.svg text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.theme text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2 diff=php
*.twig text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.txt text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.xml text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
*.yml text eol=lf whitespace=blank-at-eol,-blank-at-eof,-space-before-tab,tab-in-indent,tabwidth=2
# Define binary file attributes.
# - Do not treat them as text.
# - Include binary diff in patches instead of "binary files differ."
*.eot -text diff
*.exe -text diff
*.gif -text diff
*.gz -text diff
*.ico -text diff
*.jpeg -text diff
*.jpg -text diff
*.otf -text diff
*.phar -text diff
*.png -text diff
*.svgz -text diff
*.ttf -text diff
*.woff -text diff
*.woff2 -text diff
See also:
Because a constructor cannot be inherited in Java and Method Overriding requires inheritance. Therefore, it's not applicable.
file version < 5 : file -i -b /path/to/file
file version >=5 : file --mime-type -b /path/to/file
You may use a delegate to solve this issue. Here is an example that is showing how to update a textBox using diffrent thread
public delegate void UpdateTextCallback(string message);
private void TestThread()
{
for (int i = 0; i <= 1000000000; i++)
{
Thread.Sleep(1000);
richTextBox1.Dispatcher.Invoke(
new UpdateTextCallback(this.UpdateText),
new object[] { i.ToString() }
);
}
}
private void UpdateText(string message)
{
richTextBox1.AppendText(message + "\n");
}
private void button1_Click(object sender, RoutedEventArgs e)
{
Thread test = new Thread(new ThreadStart(TestThread));
test.Start();
}
TestThread method is used by thread named test to update textBox
There are two ways which we can use to change size of your MatDialog component in angular material
1) From Outside Component Which Call Dialog Component
import { MatDialog, MatDialogConfig, MatDialogRef } from '@angular/material';
dialogRef: MatDialogRef <any> ;
constructor(public dialog: MatDialog) { }
openDialog() {
this.dialogRef = this.dialog.open(TestTemplateComponent, {
height: '40%',
width: '60%'
});
this.dialogRef.afterClosed().subscribe(result => {
this.dialogRef = null;
});
}
2) From Inside Dialog Component. dynamically change its size
import { MatDialog, MatDialogConfig, MatDialogRef } from '@angular/material';
constructor(public dialogRef: MatDialogRef<any>) { }
ngOnInit() {
this.dialogRef.updateSize('80%', '80%');
}
use updateSize() in any function in dialog component. it will change dialog size automatically.
for more information check this link https://material.angular.io/components/component/dialog
I am going to assume this is a WinForms questions (which it feels like, based on it being a "program" rather than a website/app). In which case you can simple do the following to change the text colour of a label:
myLabel.ForeColor = System.Drawing.Color.Red;
Or any other colour of your choice. If you want to be more specific you can use an RGB value like so:
myLabel.ForeColor = Color.FromArgb(0, 0, 0);//(R, G, B) (0, 0, 0 = black)
Having different colours for different users can be done a number of ways. For example, you could allow each user to specify their own RGB value colours, store these somewhere and then load them when the user "connects".
An alternative method could be to just use 2 colours - 1 for the current user (running the app) and another colour for everyone else. This would help the user quickly identify their own messages above others.
A third approach could be to generate the colour randomly - however you will likely get conflicting values that do not show well against your background, so I would suggest not taking this approach. You could have a pre-defined list of "acceptable" colours and just pop one from that list for each user that joins.
Centralized DLL library.
PercentRelativeLayout is deprecated from Revision 26.0.0 of support Library.
Google introduced new Layout called ConstraintLayout.
Add the library as a dependency in your module-level build.gradle file:
dependencies {
compile 'com.android.support.constraint:constraint-layout:1.0.1'
}
just add in a layout file:
<?xml version="1.0" encoding="utf-8"?>
<android.support.constraint.ConstraintLayout
xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:app="http://schemas.android.com/apk/res-auto"
android:layout_width="match_parent"
android:layout_height="match_parent">
</android.support.constraint.ConstraintLayout>
Constraints
Constraints help you keep widgets aligned. You can use anchors, such as the constraint handles shown below, to determine alignment rules between various widgets.
Wrap Content
: The view expands as needed to fit its contents.Match Constraints
: The view expands as needed to meet the definition of its constraints after accounting for margins. However, if the given dimension has only one constraint, then the view expands to fit its contents. Using this mode on either the height or width also allows you to set a size ratio.Fixed
: You specify a specific dimension in the text box below or by resizing the view in the editor.Spread
: The views are evenly distributed (after margins are accounted for). This is the default.Spread inside
: The first and last view are affixed to the constraints on each end of the chain and the rest are evenly distributed.Weighted
: When the chain is set to either spread or spread inside, you can fill the remaining space by setting one or more views to "match constraints" (0dp). By default, the space is evenly distributed between each view that's set to "match constraints," but you can assign a weight of importance to each view using the layout_constraintHorizontal_weight and layout_constraintVertical_weight attributes. If you're familiar with layout_weight in a linear layout, this works the same way. So the view with the highest weight value gets the most amount of space; views that have the same weight get the same amount of space.Packed
: The views are packed together (after margins are accounted for). You can then adjust the whole chain's bias (left/right or up/down) by changing the chain's head view bias.Center Horizontally or Center Vertically
: To create a chain of views quickly, select them all, right-click one of the views, and then select either Center Horizontally or Center Vertically, to create either a horizontal or vertical chainBaseline alignment
: Align the text baseline of a view to the text baseline of another view.Constrain to a guideline
: You can add a vertical or horizontal guideline to which you can constrain views, and the guideline will be invisible to app users. You can position the guideline within the layout based on either dp units or percent, relative to the layout's edge.Adjust the constraint bias
: When you add a constraint to both sides of a view (and the view size for the same dimension is either "fixed" or "wrap content"), the view becomes centered between the two constraints with a bias of 50% by default. You can adjust the bias by dragging the bias slider in the Properties windowSet size as a ratio
: You can set the view size to a ratio such as 16:9 if at least one of the view dimensions is set to "match constraints" (0dp). You can learn more from the official doc.
update Hotels set Discount=30 where Hotelid >= 1 and Hotelid <= 5504
If you have an java.awt.Image
, rezising it doesn't require any additional libraries. Just do:
Image newImage = yourImage.getScaledInstance(newWidth, newHeight, Image.SCALE_DEFAULT);
Ovbiously, replace newWidth
and newHeight
with the dimensions of the specified image.
Notice the last parameter: it tells to the runtime the algorithm you want to use for resizing.
There are algorithms that produce a very precise result, however these take a large time to complete.
You can use any of the following algorithms:
Image.SCALE_DEFAULT
: Use the default image-scaling algorithm.Image.SCALE_FAST
: Choose an image-scaling algorithm that gives higher priority to scaling speed than smoothness of the scaled image.Image.SCALE_SMOOTH
: Choose an image-scaling algorithm that gives higher priority to image smoothness than scaling speed.Image.SCALE_AREA_AVERAGING
: Use the Area Averaging image scaling algorithm.Image.SCALE_REPLICATE
: Use the image scaling algorithm embodied in the ReplicateScaleFilter
class.See the Javadoc for more info.
java.lang.String.split
splits on regular expressions, and .
in a regular expression means "any character".
Try temp.split("\\.")
.
I'm using Android Studio and as of 19th of January 2016 this did the trick for me. (This seems like something that changes every year or so)
Go to: app -> Gradle Scripts -> build.gradle (Module: app)
Then under model { ... android.ndk { ... and add a line: stl = "gnustl_shared"
Like this:
model {
...
android.ndk {
moduleName = "gl2jni"
cppFlags.add("-Werror")
ldLibs.addAll(["log", "GLESv2"])
stl = "gnustl_shared" // <-- this is the line that I added
}
...
}
Another shorthand to (@maudulus's answer) to remove {maxFractionDigits}
since it's optional.
You can use {{numberExample | number : '1.2'}}
With standart binding you need to use converters that looks little windy. So, I recommend you to look at my project CalcBinding, which was developed specially to resolve this problem and some others. With advanced binding you can write expressions with many source properties directly in xaml. Say, you can write something like:
<Button IsEnabled="{c:Binding Path=!IsReadOnly}" />
or
<Button Content="{c:Binding ElementName=grid, Path=ActualWidth+Height}"/>
or
<Label Content="{c:Binding A+B+C }" />
or
<Button Visibility="{c:Binding IsChecked, FalseToVisibility=Hidden}" />
where A, B, C, IsChecked - properties of viewModel and it will work properly
This capitalizes this first letter and every letter following a space and lower cases any other letter.
public string CapitalizeFirstLetterAfterSpace(string input)
{
System.Text.StringBuilder sb = new System.Text.StringBuilder(input);
bool capitalizeNextLetter = true;
for(int pos = 0; pos < sb.Length; pos++)
{
if(capitalizeNextLetter)
{
sb[pos]=System.Char.ToUpper(sb[pos]);
capitalizeNextLetter = false;
}
else
{
sb[pos]=System.Char.ToLower(sb[pos]);
}
if(sb[pos]=' ')
{
capitalizeNextLetter=true;
}
}
}
Sample code from @polyglot solution
SQLiteCommand sql_cmd;
sql_cmd.CommandText = "select seq from sqlite_sequence where name='myTable'; ";
int newId = Convert.ToInt32( sql_cmd.ExecuteScalar( ) );
Found a good code with comments explaining each statement. Code found at - accessallinone
Sub DAOLooping()
On Error GoTo ErrorHandler
Dim strSQL As String
Dim rs As DAO.Recordset
strSQL = "tblTeachers"
'For the purposes of this post, we are simply going to make
'strSQL equal to tblTeachers.
'You could use a full SELECT statement such as:
'SELECT * FROM tblTeachers (this would produce the same result in fact).
'You could also add a Where clause to filter which records are returned:
'SELECT * FROM tblTeachers Where ZIPPostal = '98052'
' (this would return 5 records)
Set rs = CurrentDb.OpenRecordset(strSQL)
'This line of code instantiates the recordset object!!!
'In English, this means that we have opened up a recordset
'and can access its values using the rs variable.
With rs
If Not .BOF And Not .EOF Then
'We don’t know if the recordset has any records,
'so we use this line of code to check. If there are no records
'we won’t execute any code in the if..end if statement.
.MoveLast
.MoveFirst
'It is not necessary to move to the last record and then back
'to the first one but it is good practice to do so.
While (Not .EOF)
'With this code, we are using a while loop to loop
'through the records. If we reach the end of the recordset, .EOF
'will return true and we will exit the while loop.
Debug.Print rs.Fields("teacherID") & " " & rs.Fields("FirstName")
'prints info from fields to the immediate window
.MoveNext
'We need to ensure that we use .MoveNext,
'otherwise we will be stuck in a loop forever…
'(or at least until you press CTRL+Break)
Wend
End If
.close
'Make sure you close the recordset...
End With
ExitSub:
Set rs = Nothing
'..and set it to nothing
Exit Sub
ErrorHandler:
Resume ExitSub
End Sub
Recordsets have two important properties when looping through data, EOF (End-Of-File) and BOF (Beginning-Of-File). Recordsets are like tables and when you loop through one, you are literally moving from record to record in sequence. As you move through the records the EOF property is set to false but after you try and go past the last record, the EOF property becomes true. This works the same in reverse for the BOF property.
These properties let us know when we have reached the limits of a recordset.
I guess you will get ORA-01741: illegal zero-length identifier if you use the following
SELECT "" AS Contact FROM Customers;
And if you use the following 2 statements, you will be getting the same null value populated in the column.
SELECT '' AS Contact FROM Customers; OR SELECT null AS Contact FROM Customers;
Set the PATH as below:
In the csh shell - type setenv PATH "$PATH:/usr/local/bin/python"
and press Enter.
In the bash shell (Linux) - type export PATH="$PATH:/usr/local/bin/python"
and press Enter.
In the sh or ksh shell - type PATH="$PATH:/usr/local/bin/python"
and press Enter.
Note - /usr/local/bin/python
is the path of the Python directory
now run as below:
-bash-4.2$ python test.py
Hello, Python!
read this...
Portable HttpClient for .NET Framework and Windows Phone
see paragraph Using HttpClient on .NET Framework 4.0 or Windows Phone 7.5 http://blogs.msdn.com/b/bclteam/archive/2013/02/18/portable-httpclient-for-net-framework-and-windows-phone.aspx
You need to manually download the apt deb package. Then run dpkg and it should install.
string.Format("{0:hh:mm:ss tt}", DateTime.Now)
This should give you the string value of the time. tt should append the am/pm.
You can also look at the related topic:
I don't believe this is possible. The dialog box that gets displayed allows the user to select a printer to print to. So, let's say it would be possible for your application to just click and print, and a user clicks your print button, but has two printers connected to the computer. Or, more likely, that user is working in an office building with 25 printers. Without that dialog box, how would the computer know to which printer to print?
Try the following command sequence:
$ git fetch origin <copy/past commit sha1 here>
$ git checkout FETCH_HEAD
$ git push origin master
You can also use the Filter button to filter tables with a certain string in it. You can do the same with stored procedures and views.
Input Dimension Clarified:
Not a direct answer, but I just realized the word Input Dimension could be confusing enough, so be wary:
It (the word dimension alone) can refer to:
a) The dimension of Input Data (or stream) such as # N of sensor axes to beam the time series signal, or RGB color channel (3): suggested word=> "InputStream Dimension"
b) The total number /length of Input Features (or Input layer) (28 x 28 = 784 for the MINST color image) or 3000 in the FFT transformed Spectrum Values, or
"Input Layer / Input Feature Dimension"
c) The dimensionality (# of dimension) of the input (typically 3D as expected in Keras LSTM) or (#RowofSamples, #of Senors, #of Values..) 3 is the answer.
"N Dimensionality of Input"
d) The SPECIFIC Input Shape (eg. (30,50,50,3) in this unwrapped input image data, or (30, 250, 3) if unwrapped Keras:
Keras has its input_dim refers to the Dimension of Input Layer / Number of Input Feature
model = Sequential()
model.add(Dense(32, input_dim=784)) #or 3 in the current posted example above
model.add(Activation('relu'))
In Keras LSTM, it refers to the total Time Steps
The term has been very confusing, is correct and we live in a very confusing world!!
I find one of the challenge in Machine Learning is to deal with different languages or dialects and terminologies (like if you have 5-8 highly different versions of English, then you need to very high proficiency to converse with different speakers). Probably this is the same in programming languages too.
So after research the following is discovered:
For a div#bar
setting display:block; width: auto;
causes the equivalent of outerWidth:100%;
For a table#bar
you need to wrap it in a div with the rules stated below. So your structure becomes:
<div id="foo">
<div id="barWrap" style="border....">
<table id="bar" style="width: 100%; border: 0; padding: 0; margin: 0;">
This way the table takes up the parent div 100%, and #barWrap
is used to add borders/margin/padding to the #bar
table. Note that you will need to set the background of the whole thing in #barWrap
and have #bar
's background be transparent or the same as #barWrap
.
For textarea#bar
and input#bar
you need to do the same thing as table#bar
, the down side is that by removing the borders you stop native widget rendering of the input/textarea and the #barWrap
's borders will look a bit different than everything else, so you will probably have to style all your inputs this way.
Demi Magus answer worked for me until Rails 5.
On Apache2/Passenger/Ruby (2.4)/Rails (5.1.6), I had to put
export SECRET_KEY_BASE=GENERATED_CODE
from Demi Magus answer in /etc/apache2/envvars, cause /etc/profile seems to be ignored.
Source: https://www.phusionpassenger.com/library/indepth/environment_variables.html#apache
Here is some relevant code:
// Create a trust manager that does not validate certificate chains
TrustManager[] trustAllCerts = new TrustManager[]{
new X509TrustManager() {
public java.security.cert.X509Certificate[] getAcceptedIssuers() {
return null;
}
public void checkClientTrusted(
java.security.cert.X509Certificate[] certs, String authType) {
}
public void checkServerTrusted(
java.security.cert.X509Certificate[] certs, String authType) {
}
}
};
// Install the all-trusting trust manager
try {
SSLContext sc = SSLContext.getInstance("SSL");
sc.init(null, trustAllCerts, new java.security.SecureRandom());
HttpsURLConnection.setDefaultSSLSocketFactory(sc.getSocketFactory());
} catch (Exception e) {
}
// Now you can access an https URL without having the certificate in the truststore
try {
URL url = new URL("https://hostname/index.html");
} catch (MalformedURLException e) {
}
This will completely disable SSL checking—just don't learn exception handling from such code!
To do what you want, you would have to implement a check in your TrustManager that prompts the user.
Corrected a few things and added an alternative select - delete as appropriate.
DELIMITER |
CREATE PROCEDURE getNearestCities
(
IN p_cityID INT -- should this be int unsigned ?
)
BEGIN
DECLARE cityLat FLOAT; -- should these be decimals ?
DECLARE cityLng FLOAT;
-- method 1
SELECT lat,lng into cityLat, cityLng FROM cities WHERE cities.cityID = p_cityID;
SELECT
b.*,
HAVERSINE(cityLat,cityLng, b.lat, b.lng) AS dist
FROM
cities b
ORDER BY
dist
LIMIT 10;
-- method 2
SELECT
b.*,
HAVERSINE(a.lat, a.lng, b.lat, b.lng) AS dist
FROM
cities AS a
JOIN cities AS b on a.cityID = p_cityID
ORDER BY
dist
LIMIT 10;
END |
delimiter ;
This what worked for me on Amazon Linux
sudo yum list | grep python3
sudo yum install python36.x86_64 python36-tools.x86_64
$ python3 --version Python 3.6.8
$ pip -V pip 9.0.3 from /usr/lib/python2.7/dist-packages (python 2.7)
]$ sudo python3.6 -m pip install --upgrade pip Collecting pip Downloading https://files.pythonhosted.org/packages/d8/f3/413bab4ff08e1fc4828dfc59996d721917df8e8583ea85385d51125dceff/pip-19.0.3-py2.py3-none-any.whl (1.4MB) 100% |¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦| 1.4MB 969kB/s Installing collected packages: pip Found existing installation: pip 9.0.3 Uninstalling pip-9.0.3: Successfully uninstalled pip-9.0.3 Successfully installed pip-19.0.3
$ pip -V pip 19.0.3 from /usr/local/lib/python3.6/site-packages/pip (python 3.6)
You must:
From the XML specification:
To allow attribute values to contain both single and double quotes, the apostrophe or single-quote character (') may be represented as "'", and the double-quote character (") as """.
echo -n 5a | perl -pe 's/([0-9a-f]{2})/chr hex $1/gie'
Note that this won't skip non-hex characters. If you want just the hex (no whitespace from the original string etc):
echo 5a | perl -ne 's/([0-9a-f]{2})/print chr hex $1/gie'
Also, zsh
and bash
support this natively in echo
:
echo -e '\x5a'
O(1)
always execute in the same time regardless of dataset n.
An example of O(1) would be an ArrayList accessing its element with index.
O(n)
also known as Linear Order, the performance will grow linearly and in direct proportion to the size of the input data.
An example of O(n) would be an ArrayList insertion and deletion at random position. As each subsequent insertion/deletion at random position will cause the elements in the ArrayList to shift left right of its internal array in order to maintain its linear structure, not to mention about the creation of a new arrays and the copying of elements from the old to new array which takes up expensive processing time hence, detriment the performance.
Sometime, I forget to copy library from Release-universal and mistakenly copy from Release-iphoneos. Usually Release-iphoneos contains .a file which has been pruned for X86. and so it gives the error.
I like things to happen automatically and for bins to fall on "nice" values. The following seems to work quite well.
import numpy as np
import numpy.random as random
import matplotlib.pyplot as plt
def compute_histogram_bins(data, desired_bin_size):
min_val = np.min(data)
max_val = np.max(data)
min_boundary = -1.0 * (min_val % desired_bin_size - min_val)
max_boundary = max_val - max_val % desired_bin_size + desired_bin_size
n_bins = int((max_boundary - min_boundary) / desired_bin_size) + 1
bins = np.linspace(min_boundary, max_boundary, n_bins)
return bins
if __name__ == '__main__':
data = np.random.random_sample(100) * 123.34 - 67.23
bins = compute_histogram_bins(data, 10.0)
print(bins)
plt.hist(data, bins=bins)
plt.xlabel('Value')
plt.ylabel('Counts')
plt.title('Compute Bins Example')
plt.grid(True)
plt.show()
The result has bins on nice intervals of bin size.
[-70. -60. -50. -40. -30. -20. -10. 0. 10. 20. 30. 40. 50. 60.]
Using -s
option will print output of all functions, which may be too much.
If you need particular output, the doc page you mentioned offers few suggestions:
Insert assert False, "dumb assert to make PyTest print my stuff"
at the end of your function, and you will see your output due to failed test.
You have special object passed to you by PyTest, and you can write the output into a file to inspect it later, like
def test_good1(capsys):
for i in range(5):
print i
out, err = capsys.readouterr()
open("err.txt", "w").write(err)
open("out.txt", "w").write(out)
You can open the out
and err
files in a separate tab and let editor automatically refresh it for you, or do a simple py.test; cat out.txt
shell command to run your test.
That is rather hackish way to do stuff, but may be it is the stuff you need: after all, TDD means you mess with stuff and leave it clean and silent when it's ready :-).
your xpath should work . i have tested your xpath and mine in both MarkLogic and Zorba Xquery/ Xpath implementation.
Both should work.
/node/child::text()[1] - should return Text1
/node/child::text()[2] - should return text2
/node/text()[1] - should return Text1
/node/text()[2] - should return text2
apache-tomcat-8.0.33
If you want to enable debug logging in tomcat for TLD scanned jars then you have to change /conf/logging.properties file in tomcat directory.
uncomment the line :
org.apache.jasper.servlet.TldScanner.level = FINE
FINE level is for debug log.
This should work for normal tomcat.
If the tomcat is running under eclipse. Then you have to set the path of tomcat logging.properties in eclipse.
Now the jar files that scanned for TLDs should show in the log.
It can be done using CSS alone. It works perfect on my machine in Firefox, Chrome and Opera browser under Ubuntu 12.04.
CSS :
.hover_img a { position:relative; }
.hover_img a span { position:absolute; display:none; z-index:99; }
.hover_img a:hover span { display:block; }
HTML :
<div class="hover_img">
<a href="#">Show Image<span><img src="images/01.png" alt="image" height="100" /></span></a>
</div>
Javascript is client-side, you cannot email with Javascript. Browser recognizes maybe only mailto:
and starts your default mail client.
The answer posted by Craig White has a big performance penalty
SELECT * FROM `table` WHERE BINARY `column` = 'value'
because it doesn't use indexes. So, either you need to change the table collation like mention here https://dev.mysql.com/doc/refman/5.7/en/case-sensitivity.html.
OR
Easiest fix, you should use a BINARY of value.
SELECT * FROM `table` WHERE `column` = BINARY 'value'
E.g.
mysql> EXPLAIN SELECT * FROM temp1 WHERE BINARY col1 = "ABC" AND col2 = "DEF" ;
+----+-------------+--------+------+---------------+------+---------+------+--------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+--------+------+---------------+------+---------+------+--------+-------------+
| 1 | SIMPLE | temp1 | ALL | NULL | NULL | NULL | NULL | 190543 | Using where |
+----+-------------+--------+------+---------------+------+---------+------+--------+-------------+
VS
mysql> EXPLAIN SELECT * FROM temp1 WHERE col1 = BINARY "ABC" AND col2 = "DEF" ;
+----+-------------+-------+-------+---------------+---------------+---------+------+------+------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+-------+---------------+---------------+---------+------+------+------------------------------------+
| 1 | SIMPLE | temp1 | range | col1_2e9e898e | col1_2e9e898e | 93 | NULL | 2 | Using index condition; Using where |
+----+-------------+-------+-------+---------------+---------------+---------+------+------+------------------------------------+
enter code here
1 row in set (0.00 sec)
As @mipadi points out, you can use git show $COMMIT
, but this also shows some headers and the commit message. If you want a straight diff, use git show --pretty=format:%b $COMMIT
.
This is, obviously not a very short hand, so I'm keeping this alias in my .gitconfig
[alias]
sd = show --pretty=format:%b
This enables me to use git sd $COMMIT
to show diff.
In C, you don't really have strings, as a generic first-class object. You have to manage them as arrays of characters, which mean that you have to determine how you would like to manage your arrays. One way is to normal variables, e.g. placed on the stack. Another way is to allocate them dynamically using malloc
.
Once you have that sorted, you can copy the content of one array to another, to concatenate two strings using strcpy
or strcat
.
Having said that, C do have the concept of "string literals", which are strings known at compile time. When used, they will be a character array placed in read-only memory. It is, however, possible to concatenate two string literals by writing them next to each other, as in "foo" "bar"
, which will create the string literal "foobar".
Make sure you don't put a space between the semi-colon and the new folder location that you are adding to the path.
For example it should look like...
{last path entry};C:\Python27;C:\Python27\Scripts;
...not...
{last path entry}; C:\Python27; C:\Python27\Scripts;
You missed the each=
argument to rep()
:
R> n <- 3
R> rep(1:5, each=n)
[1] 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5
R>
so your example can be done with a simple
R> rep(1:8, each=20)
The bash script runs in a separate subshell. In order to make this work you will need to source this other script as well.
It can also be done as follows:
csv_files = s3.list_objects_v2(s3_bucket_path)
for obj in csv_files['Contents']:
key = obj['Key']
On Windows it can be found in the file "C:\Windows\System32\config\systemprofile\AppData\Local\Jenkins\.jenkins\secrets\initialAdminPassword"
(I know OP specified EC2 server, but this is now the first result on google when searching Jenkins Password)
You can go to /etc/init.d/ - you will see a daemon template called skeleton.
You can duplicate it and then enter your script under the start function.
With git there is a https format
https://github.com/equivalent/we_demand_serverless_ruby.git
This format accepts User + password
https://bot-user:[email protected]/equivalent/we_demand_serverless_ruby.git
So what you can do is create a new user that will be used just as a bot,
add only enough permissions that he can just read the repository you
want to load in NPM modules and just have that directly in your
packages.json
Github > Click on Profile > Settings > Developer settings > Personal access tokens > Generate new token
In Select Scopes part, check the on repo: Full control of private repositories
This is so that token can access private repos that user can see
Now create new group in your organization, add this user to the group and add only repositories that you expect to be pulled this way (READ ONLY permission !)
You need to be sure to push this config only to private repo
Then you can add this to your / packages.json (bot-user is name of user, xxxxxxxxx is the generated personal token)
// packages.json
{
// ....
"name_of_my_lib": "https://bot-user:[email protected]/ghuser/name_of_my_lib.git"
// ...
}
https://blog.eq8.eu/til/pull-git-private-repo-from-github-from-npm-modules-or-bundler.html
Just try $('.handle').css('left', '300px');
I have just found this pretty solution:
import sys; sys.path.insert(0, '..') # add parent folder path where lib folder is
import lib.store_load # store_load is a file on my library folder
You just want some functions of that file
from lib.store_load import your_function_name
If python version >= 3.3 you do not need init.py file in the folder
Static variables in the context of a class are shared between all instances of a class.
In a function, it remains a persistent variable, so you could for instance count the number of times a function has been called.
When used outside of a function or class, it ensures the variable can only be used by code in that specific file, and nowhere else.
Constant variables however are prevented from changing. A common use of const and static together is within a class definition to provide some sort of constant.
class myClass {
public:
static const int TOTAL_NUMBER = 5;
// some public stuff
private:
// some stuff
};
Using Date object guarantees that. For eg if you try to create April 31st
:
new Date(2014,3,31) // Thu May 01 2014 00:00:00
Please note that it's zero indexed, so Jan. is
0
, Feb. is1
etc.
Use the shell error handling for unset variables (note the double $
):
$ cat Makefile
foo:
echo "something is set to $${something:?}"
$ make foo
echo "something is set to ${something:?}"
/bin/sh: something: parameter null or not set
make: *** [foo] Error 127
$ make foo something=x
echo "something is set to ${something:?}"
something is set to x
If you need a custom error message, add it after the ?
:
$ cat Makefile
hello:
echo "hello $${name:?please tell me who you are via \$$name}"
$ make hello
echo "hello ${name:?please tell me who you are via \$name}"
/bin/sh: name: please tell me who you are via $name
make: *** [hello] Error 127
$ make hello name=jesus
echo "hello ${name:?please tell me who you are via \$name}"
hello jesus
Once you have a JArray you can treat it just like any other Enumerable object, and using linq you can access them, check them, verify them, and select them.
var str = @"[1, 2, 3]";
var jArray = JArray.Parse(str);
Console.WriteLine(String.Join("-", jArray.Where(i => (int)i > 1).Select(i => i.ToString())));
unexpand
(and expand
)Here is a very good solution: https://stackoverflow.com/a/11094620/1115187, mostly because it uses *nix-utilities:
My original answer
Bash snippet for replacing 4-spaces indentation (there are two {4}
in script) with tabs in all .py
files in the ./app
folder (recursively):
find ./app -iname '*.py' -type f \
-exec awk -i inplace \
'{ match($0, /^(( {4})*)(.*?)$/, arr); gsub(/ {4}/, "\t", arr[1]) }; { print arr[1] arr[3] }' {} \;
It doesn't modify 4-spaces in the middle or at the end.
Was tested under Ubuntu 16.0x and Linux Mint 18
After some googling I found this:
curl -c cookie.txt -d "LoginName=someuser" -d "password=somepass" https://oursite/a
curl -b cookie.txt https://oursite/b
No idea if it works, but it might lead you in the right direction.
You can do this per class or globally, I believe.
For per class, try @JsonSerialize above class declaration.
For a mapper, here's one example:
ObjectMapper mapper = new ObjectMapper();
mapper.configure(SerializationFeature.FAIL_ON_EMPTY_BEANS, false);
// do various things, perhaps:
String someJsonString = mapper.writeValueAsString(someClassInstance);
SomeClass someClassInstance = mapper.readValue(someJsonString, SomeClass.class)
The StackOverflow link below also has an example for a Spring project.
For REST with Jersey, I don't remember off the top off my head, but I believe it's similar.
Couple of links I dug up: (edited 1st link due to Codehaus shutting down).
Correct and more clear way is :
<div style={{"font-size" : "10px", "height" : "100px", "width" : "100%"}}> My inline Style </div>
It is made more simple by following approach :
// JS
const styleObject = {
"font-size" : "10px",
"height" : "100px",
"width" : "100%"
}
// HTML
<div style={styleObject}> My inline Style </div>
Inline style
attribute expects object. Hence its written in {}
, and it becomes double {{}}
as one is for default react standards.
You can use in()
:
select *
from table
where id in (multiple row query)
or use a join:
select distinct t.*
from source_of_id_table s
join table t on t.id = s.t_id
where <conditions for source_of_id_table>
The join is never a worse choice for performance, and depending on the exact situation and the database you're using, can give much better performance.
Actually you must make sure that the IIS Management Console feature is explicitly checked. On my win 10 pro I had to do it manually, checking the root only was not enough!
For me the accepted answer did not work as I had some asp net hidden fields which got disabled as well so I chose only to disable visible fields
//just to save the list so we can enable fields later
var list = [];
$('#parent-selector').find(':input:visible:not([readonly][disabled]),button').each(function () {
list.push('#' + this.id);
});
$(list.join(',')).attr('readonly', true);
You can get it to display time. From that you will probably have to have two controls (one date, one time) the accomplish what you want.
foo(*ob);
You don't need to cast it because it's the same Object type, you just need to dereference it.
For folks that are here looking for a solution for images in particular here it is.
private Bitmap getBitmapFromUri(Uri contentUri) {
String path = null;
String[] projection = { MediaStore.Images.Media.DATA };
Cursor cursor = getContentResolver().query(contentUri, projection, null, null, null);
if (cursor.moveToFirst()) {
int columnIndex = cursor.getColumnIndexOrThrow(MediaStore.Images.Media.DATA);
path = cursor.getString(columnIndex);
}
cursor.close();
Bitmap bitmap = BitmapFactory.decodeFile(path);
return bitmap;
}
Just define the button as lateinit var at top of your class:
lateinit var buttonOk: Button
When you want to use a button in another layout you should define it in that layout. For example if you want to use button in layout which name is 'dialogview', you should write:
buttonOk = dialogView.findViewById<Button>(R.id.buttonOk)
After this you can use setonclicklistener for the button and you won't have any error. You can see correct answer of this question: Android Kotlin findViewById must not be null
Absolute XPath: It is the direct way to find the element, but the disadvantage of the absolute XPath is that if there are any changes made in the path of the element then that XPath gets failed.
The key characteristic of XPath is that it begins with the single forward slash(/) ,which means you can select the element from the root node.
Below is the example of an absolute xpath.
/html/body/div[1]/section/div/div[2]/div/form/div[2]/input[3]
Relative Xpath: Relative Xpath starts from the middle of HTML DOM structure. It starts with double forward slash (//). It can search elements anywhere on the webpage, means no need to write a long xpath and you can start from the middle of HTML DOM structure. Relative Xpath is always preferred as it is not a complete path from the root element.
Below is the example of a relative XPath.
//input[@name=’email’]
What's the first part of your Subversion repository URL?
I can't guarantee the first four since it's possible to reconfigure everything to use different ports, of if you go through a proxy of some sort.
If you're using a VPN, you may have to configure your VPN client to reroute these to their correct ports. A lot of places don't configure their correctly VPNs to do this type of proxying. It's either because they have some sort of anal-retentive IT person who's being overly security conscious, or because they simply don't know any better. Even worse, they'll give you a client where this stuff can't be reconfigured.
The only way around that is to log into a local machine over the VPN, and then do everything from that system.
I think you can use the "engines" field:
{ "engines" : { "node" : ">=0.12" } }
As you're saying your code definitely won't work with any lower versions, you probably want the "engineStrict" flag too:
{ "engineStrict" : true }
Documentation for the package.json file can be found on the npmjs site
Update
engineStrict
is now deprecated, so this will only give a warning. It's now down to the user to run npm config set engine-strict true
if they want this.
Update 2
As ben pointed out below, creating a .npmrc
file at the root of your project (the same level as your package.json file) with the text engine-strict=true
will force an error during installation if the Node version is not compatible.
As already stated, you can use sigaction
to trap ctrl-c, or select
to trap any standard input.
Note however that with the latter method you also need to set the TTY so that it's in character-at-a-time rather than line-at-a-time mode. The latter is the default - if you type in a line of text it doesn't get sent to the running program's stdin until you press enter.
You'd need to use the tcsetattr()
function to turn off ICANON mode, and probably also disable ECHO too. From memory, you also have to set the terminal back into ICANON mode when the program exits!
Just for completeness, here's some code I've just knocked up (nb: no error checking!) which sets up a Unix TTY and emulates the DOS <conio.h>
functions kbhit()
and getch()
:
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/select.h>
#include <termios.h>
struct termios orig_termios;
void reset_terminal_mode()
{
tcsetattr(0, TCSANOW, &orig_termios);
}
void set_conio_terminal_mode()
{
struct termios new_termios;
/* take two copies - one for now, one for later */
tcgetattr(0, &orig_termios);
memcpy(&new_termios, &orig_termios, sizeof(new_termios));
/* register cleanup handler, and set the new terminal mode */
atexit(reset_terminal_mode);
cfmakeraw(&new_termios);
tcsetattr(0, TCSANOW, &new_termios);
}
int kbhit()
{
struct timeval tv = { 0L, 0L };
fd_set fds;
FD_ZERO(&fds);
FD_SET(0, &fds);
return select(1, &fds, NULL, NULL, &tv);
}
int getch()
{
int r;
unsigned char c;
if ((r = read(0, &c, sizeof(c))) < 0) {
return r;
} else {
return c;
}
}
int main(int argc, char *argv[])
{
set_conio_terminal_mode();
while (!kbhit()) {
/* do some work */
}
(void)getch(); /* consume the character */
}
button.setVisibility(button.getVisibility() == View.VISIBLE ? View.GONE : View.VISIBLE);
Makes it visible if invisible and invisible if visible
I was tying to figure out how to do this but i could not get any answers from google. I know this is an old thread but here was my solution:
Use the following class:
class ThreadWaiter
{
private int _numThreads = 0;
private int _spinTime;
public ThreadWaiter(int SpinTime)
{
this._spinTime = SpinTime;
}
public void AddThreads(int numThreads)
{
_numThreads += numThreads;
}
public void RemoveThread()
{
if (_numThreads > 0)
{
_numThreads--;
}
}
public void Wait()
{
while (_numThreads != 0)
{
System.Threading.Thread.Sleep(_spinTime);
}
}
}
Spring-integration example, routing based on a an Enum field:
public class BookOrder {
public enum OrderType { DELIVERY, PICKUP } //enum
public BookOrder(..., OrderType orderType) //orderType
...
config:
<router expression="payload.orderType" input-channel="processOrder">
<mapping value="DELIVERY" channel="delivery"/>
<mapping value="PICKUP" channel="pickup"/>
</router>
This variant is much shorter
try { final File path = new File( Environment.getExternalStorageDirectory(), "DBO_logs5"); if (!path.exists()) { path.mkdir(); } Runtime.getRuntime().exec( "logcat -d -f " + path + File.separator + "dbo_logcat" + ".txt"); } catch (IOException e) { e.printStackTrace(); }
Others explained very well and just want to give with simple examples.
Single quotes can be used around text to prevent the shell from interpreting any special characters. Dollar signs, spaces, ampersands, asterisks and other special characters are all ignored when enclosed within single quotes.
$ echo 'All sorts of things are ignored in single quotes, like $ & * ; |.'
It will give this:
All sorts of things are ignored in single quotes, like $ & * ; |.
The only thing that cannot be put within single quotes is a single quote.
Double quotes act similarly to single quotes, except double quotes still allow the shell to interpret dollar signs, back quotes and backslashes. It is already known that backslashes prevent a single special character from being interpreted. This can be useful within double quotes if a dollar sign needs to be used as text instead of for a variable. It also allows double quotes to be escaped so they are not interpreted as the end of a quoted string.
$ echo "Here's how we can use single ' and double \" quotes within double quotes"
It will give this:
Here's how we can use single ' and double " quotes within double quotes
It may also be noticed that the apostrophe, which would otherwise be interpreted as the beginning of a quoted string, is ignored within double quotes. Variables, however, are interpreted and substituted with their values within double quotes.
$ echo "The current Oracle SID is $ORACLE_SID"
It will give this:
The current Oracle SID is test
Back quotes are wholly unlike single or double quotes. Instead of being used to prevent the interpretation of special characters, back quotes actually force the execution of the commands they enclose. After the enclosed commands are executed, their output is substituted in place of the back quotes in the original line. This will be clearer with an example.
$ today=`date '+%A, %B %d, %Y'`
$ echo $today
It will give this:
Monday, September 28, 2015
You are not returning anything, at least from your snippet and comment.
const def = (props) => { <div></div> };
This is not returning anything, you are wrapping the body of the arrow function with curly braces but there is no return value.
const def = (props) => { return (<div></div>); };
OR
const def = (props) => <div></div>;
These two solutions on the other hand are returning a valid React component. Keep also in mind that inside your jsx
(as mentioned by @Adam) you can't have if ... else ...
but only ternary operators.
WARNING: Long script ahead.
A while ago, I faced a similar problem: from a Tcl script, launch a number of processes, then wait for all of them to finish. Here is a demo script I wrote to solve this problem.
#!/usr/bin/env tclsh
# Launches many processes and wait for them to finish.
# This script will works on systems that has the ps command such as
# BSD, Linux, and OS X
package require Tclx; # For process-management utilities
proc updatePidList {stat} {
global pidList
global allFinished
# Parse the process ID of the just-finished process
lassign $stat processId howProcessEnded exitCode
# Remove this process ID from the list of process IDs
set pidList [lindex [intersect3 $pidList $processId] 0]
set processCount [llength $pidList]
# Occasionally, a child process quits but the signal was lost. This
# block of code will go through the list of remaining process IDs
# and remove those that has finished
set updatedPidList {}
foreach pid $pidList {
if {![catch {exec ps $pid} errmsg]} {
lappend updatedPidList $pid
}
}
set pidList $updatedPidList
# Show the remaining processes
if {$processCount > 0} {
puts "Waiting for [llength $pidList] processes"
} else {
set allFinished 1
puts "All finished"
}
}
# A signal handler that gets called when a child process finished.
# This handler needs to exit quickly, so it delegates the real works to
# the proc updatePidList
proc childTerminated {} {
# Restart the handler
signal -restart trap SIGCHLD childTerminated
# Update the list of process IDs
while {![catch {wait -nohang} stat] && $stat ne {}} {
after idle [list updatePidList $stat]
}
}
#
# Main starts here
#
puts "Main begins"
set NUMBER_OF_PROCESSES_TO_LAUNCH 10
set pidList {}
set allFinished 0
# When a child process exits, call proc childTerminated
signal -restart trap SIGCHLD childTerminated
# Spawn many processes
for {set i 0} {$i < $NUMBER_OF_PROCESSES_TO_LAUNCH} {incr i} {
set childId [exec tclsh child.tcl $i &]
puts "child #$i, pid=$childId"
lappend pidList $childId
after 1000
}
# Do some processing
puts "list of processes: $pidList"
puts "Waiting for child processes to finish"
# Do some more processing if required
# After all done, wait for all to finish before exiting
vwait allFinished
puts "Main ends"
#!/usr/bin/env tclsh
# child script: simulate some lengthy operations
proc randomInteger {min max} {
return [expr int(rand() * ($max - $min + 1) * 1000 + $min)]
}
set duration [randomInteger 10 30]
puts " child #$argv runs for $duration miliseconds"
after $duration
puts " child #$argv ends"
Main begins
child #0, pid=64525
child #0 runs for 17466 miliseconds
child #1, pid=64526
child #1 runs for 14181 miliseconds
child #2, pid=64527
child #2 runs for 10856 miliseconds
child #3, pid=64528
child #3 runs for 7464 miliseconds
child #4, pid=64529
child #4 runs for 4034 miliseconds
child #5, pid=64531
child #5 runs for 1068 miliseconds
child #6, pid=64532
child #6 runs for 18571 miliseconds
child #5 ends
child #7, pid=64534
child #7 runs for 15374 miliseconds
child #8, pid=64535
child #8 runs for 11996 miliseconds
child #4 ends
child #9, pid=64536
child #9 runs for 8694 miliseconds
list of processes: 64525 64526 64527 64528 64529 64531 64532 64534 64535 64536
Waiting for child processes to finish
Waiting for 8 processes
Waiting for 8 processes
child #3 ends
Waiting for 7 processes
child #2 ends
Waiting for 6 processes
child #1 ends
Waiting for 5 processes
child #0 ends
Waiting for 4 processes
child #9 ends
Waiting for 3 processes
child #8 ends
Waiting for 2 processes
child #7 ends
Waiting for 1 processes
child #6 ends
All finished
Main ends
Here is representation of screen eclipse to make hierarachical.
I couldn't get the selected answer to work but after a bit of research, I found that the horizontal scrolling div must have white-space: nowrap
in the css.
Here's complete working code:
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>Something</title>
<style type="text/css">
#scrolly{
width: 1000px;
height: 190px;
overflow: auto;
overflow-y: hidden;
margin: 0 auto;
white-space: nowrap
}
img{
width: 300px;
height: 150px;
margin: 20px 10px;
display: inline;
}
</style>
</head>
<body>
<div id='scrolly'>
<img src='img/car.jpg'></img>
<img src='img/car.jpg'></img>
<img src='img/car.jpg'></img>
<img src='img/car.jpg'></img>
<img src='img/car.jpg'></img>
<img src='img/car.jpg'></img>
</div>
</body>
</html>
Note first that your question shows a bit of misunderstanding. origin/HEAD represents the default branch on the remote, i.e. the HEAD that's in that remote repository you're calling origin. When you switch branches in your repo, you're not affecting that. The same is true for remote branches; you might have master
and origin/master
in your repo, where origin/master
represents a local copy of the master
branch in the remote repository.
origin's HEAD will only change if you or someone else actually changes it in the remote repository, which should basically never happen - you want the default branch a public repo to stay constant, on the stable branch (probably master). origin/HEAD is a local ref representing a local copy of the HEAD in the remote repository. (Its full name is refs/remotes/origin/HEAD.)
I think the above answers what you actually wanted to know, but to go ahead and answer the question you explicitly asked... origin/HEAD is set automatically when you clone a repository, and that's about it. Bizarrely, that it's not set by commands like git remote update
- I believe the only way it will change is if you manually change it. (By change I mean point to a different branch; obviously the commit it points to changes if that branch changes, which might happen on fetch/pull/remote update.)
Edit: The problem discussed below was corrected in Git 1.8.4.3; see this update.
There is a tiny caveat, though. HEAD is a symbolic ref, pointing to a branch instead of directly to a commit, but the git remote transfer protocols only report commits for refs. So Git knows the SHA1 of the commit pointed to by HEAD and all other refs; it then has to deduce the value of HEAD by finding a branch that points to the same commit. This means that if two branches happen to point there, it's ambiguous. (I believe it picks master if possible, then falls back to first alphabetically.) You'll see this reported in the output of git remote show origin
:
$ git remote show origin
* remote origin
Fetch URL: ...
Push URL: ...
HEAD branch (remote HEAD is ambiguous, may be one of the following):
foo
master
Oddly, although the notion of HEAD printed this way will change if things change on the remote (e.g. if foo is removed), it doesn't actually update refs/remotes/origin/HEAD
. This can lead to really odd situations. Say that in the above example origin/HEAD actually pointed to foo, and origin's foo branch was then removed. We can then do this:
$ git remote show origin
...
HEAD branch: master
$ git symbolic-ref refs/remotes/origin/HEAD
refs/remotes/origin/foo
$ git remote update --prune origin
Fetching origin
x [deleted] (none) -> origin/foo
(refs/remotes/origin/HEAD has become dangling)
So even though remote show knows HEAD is master, it doesn't update anything. The stale foo branch is correctly pruned, and HEAD becomes dangling (pointing to a nonexistent branch), and it still doesn't update it to point to master. If you want to fix this, use git remote set-head origin -a
, which automatically determines origin's HEAD as above, and then actually sets origin/HEAD to point to the appropriate remote branch.
Here is my solution I use for my app.
I have several asset folder with css / js / img anf font files.
The application gets all filenames and looks if a file with this name is requested. If yes, it loads it from asset folder.
//get list of files of specific asset folder
private ArrayList listAssetFiles(String path) {
List myArrayList = new ArrayList();
String [] list;
try {
list = getAssets().list(path);
for(String f1 : list){
myArrayList.add(f1);
}
} catch (IOException e) {
e.printStackTrace();
}
return (ArrayList) myArrayList;
}
//get mime type by url
public String getMimeType(String url) {
String type = null;
String extension = MimeTypeMap.getFileExtensionFromUrl(url);
if (extension != null) {
if (extension.equals("js")) {
return "text/javascript";
}
else if (extension.equals("woff")) {
return "application/font-woff";
}
else if (extension.equals("woff2")) {
return "application/font-woff2";
}
else if (extension.equals("ttf")) {
return "application/x-font-ttf";
}
else if (extension.equals("eot")) {
return "application/vnd.ms-fontobject";
}
else if (extension.equals("svg")) {
return "image/svg+xml";
}
type = MimeTypeMap.getSingleton().getMimeTypeFromExtension(extension);
}
return type;
}
//return webresourceresponse
public WebResourceResponse loadFilesFromAssetFolder (String folder, String url) {
List myArrayList = listAssetFiles(folder);
for (Object str : myArrayList) {
if (url.contains((CharSequence) str)) {
try {
Log.i(TAG2, "File:" + str);
Log.i(TAG2, "MIME:" + getMimeType(url));
return new WebResourceResponse(getMimeType(url), "UTF-8", getAssets().open(String.valueOf(folder+"/" + str)));
} catch (IOException e) {
e.printStackTrace();
}
}
}
return null;
}
//@TargetApi(Build.VERSION_CODES.LOLLIPOP)
@SuppressLint("NewApi")
@Override
public WebResourceResponse shouldInterceptRequest(final WebView view, String url) {
//Log.i(TAG2, "SHOULD OVERRIDE INIT");
//String url = webResourceRequest.getUrl().toString();
String extension = MimeTypeMap.getFileExtensionFromUrl(url);
//I have some folders for files with the same extension
if (extension.equals("css") || extension.equals("js") || extension.equals("img")) {
return loadFilesFromAssetFolder(extension, url);
}
//more possible extensions for font folder
if (extension.equals("woff") || extension.equals("woff2") || extension.equals("ttf") || extension.equals("svg") || extension.equals("eot")) {
return loadFilesFromAssetFolder("font", url);
}
return null;
}
Unless you really must implement your own solution, you can use std::minmax_element. This returns a pair of iterators, one to the smallest element and one to the largest.
#include <algorithm>
auto minmax = std::minmax_element(std::begin(values), std::end(values));
std::cout << "min element " << *(minmax.first) << "\n";
std::cout << "max element " << *(minmax.second) << "\n";
Like so:
Date min, max; // assume these are set to something
Date d; // the date in question
return d.compareTo(min) >= 0 && d.compareTo(max) <= 0;
You can use >
instead of >=
and <
instead of <=
to exclude the endpoints from the sense of "between."
for speed you can do this
WHERE date(created_at) ='2019-10-21'
Unfortuantely, as div
elements can't be direct descendants of table
elements, the way I know to do this is to apply the CSS rules you want to each tr
element that you want to apply it to.
<table>
<tr><th>Test Table</th><tr>
<tr><td>123456789</td><tr>
<tr style="display: none; other-property: value;"><td>123456789</td><tr>
<tr style="display: none; other-property: value;"><td>123456789</td><tr>
<tr><td>123456789</td><tr>
<tr><td>123456789</td><tr>
</table>
If you have more than one CSS rule to apply to the rows in question, give the applicable rows a class
instead and offload the rules to external CSS.
<table>
<tr><th>Test Table</th><tr>
<tr><td>123456789</td><tr>
<tr class="something"><td>123456789</td><tr>
<tr class="something"><td>123456789</td><tr>
<tr><td>123456789</td><tr>
<tr><td>123456789</td><tr>
</table>
from sklearn import svm, datasets
from sklearn import metrics
from sklearn.linear_model import LogisticRegression
from sklearn.model_selection import train_test_split
from sklearn.datasets import load_breast_cancer
import matplotlib.pyplot as plt
breast_cancer = load_breast_cancer()
X = breast_cancer.data
y = breast_cancer.target
X_train, X_test, y_train, y_test = train_test_split(X,y,test_size=0.33, random_state=44)
clf = LogisticRegression(penalty='l2', C=0.1)
clf.fit(X_train, y_train)
y_pred = clf.predict(X_test)
print("Accuracy", metrics.accuracy_score(y_test, y_pred))
y_pred_proba = clf.predict_proba(X_test)[::,1]
fpr, tpr, _ = metrics.roc_curve(y_test, y_pred_proba)
auc = metrics.roc_auc_score(y_test, y_pred_proba)
plt.plot(fpr,tpr,label="data 1, auc="+str(auc))
plt.legend(loc=4)
plt.show()