np.convolve() takes one dimension array. You need to check the input and convert it into 1D.

You can use the np.ravel(), to convert the array to one dimension.

RecyclerView added support for wrap_content in 23.2.0 which was buggy , 23.2.1 was just stable , so you can use:

compile 'com.android.support:recyclerview-v7:24.2.0'

You can see the revision history here:

https://developer.android.com/topic/libraries/support-library/revisions.html

Note:

Also note that after updating support library the RecyclerView will respect wrap_content as well as match_parent so if you have a Item View of a RecyclerView set as match_parent the single view will fill whole screen

When using the $array.Add()-method, you're trying to add the element into the existing array. An array is a collection of fixed size, so you will receive an error because it can't be extended.

$array += $element creates a new array with the same elements as old one + the new item, and this new larger array replaces the old one in the $array-variable

You can use the += operator to add an element to an array. When you use it, Windows PowerShell actually creates a new array with the values of the original array and the added value. For example, to add an element with a value of 200 to the array in the $a variable, type:

    $a += 200

Source: about_Arrays

+= is an expensive operation, so when you need to add many items you should try to add them in as few operations as possible, ex:

$arr = 1..3    #Array
$arr += (4..5) #Combine with another array in a single write-operation

$arr.Count
5

If that's not possible, consider using a more efficient collection like List or ArrayList (see the other answer).

This is more of an xpath question, but like this, assuming the context is the parent element:

<xsl:value-of select="name/@attribute1" />

It’s easy; just do the following:

rvm implode

or

rm -rf ~/.rvm

And don’t forget to remove the script calls in the following files:

• ~/.bashrc
• ~/.bash_profile
• ~/.profile

And maybe others depending on whatever shell you’re using.

Enable all these from php.ini configuration file

extension=php_openssl.dll
extension=php_curl.dll
extension=php_xmlrpc.dll

I had the exact same problem, this - "meta http-equiv="X-UA-Compatible" content="IE=7">" works great in IE8 and IE9, but not in IE10. There is a bug in the server browser definition files that shipped with .NET 2.0 and .NET 4, namely that they contain definitions for a certain range of browser versions. But the versions for some browsers (like IE 10) aren't within those ranges any more. Therefore, ASP.NET sees them as unknown browsers and defaults to a down-level definition, which has certain inconveniences, like that it does not support features like JavaScript.

My thanks to Scott Hanselman for this fix.

Here is the link -

http://www.hanselman.com/blog/BugAndFixASPNETFailsToDetectIE10CausingDoPostBackIsUndefinedJavaScriptErrorOrMaintainFF5ScrollbarPosition.aspx

This MS KP fix just adds missing files to the asp.net on your server. I installed it and rebooted my server and it now works perfectly. I would have thought that MS would have given this fix a wider distribution.

Rick

No, there is no better way; yours is canonical.

On Windows:

CHDIR Displays the name of or changes the current directory.

In Linux:

PWD Displays the name of current directory.

babel-polyfill allows you to use the full set of ES6 features beyond syntax changes. This includes features such as new built-in objects like Promises and WeakMap, as well as new static methods like Array.from or Object.assign.

Without babel-polyfill, babel only allows you to use features like arrow functions, destructuring, default arguments, and other syntax-specific features introduced in ES6.

https://www.quora.com/What-does-babel-polyfill-do

https://hackernoon.com/polyfills-everything-you-ever-wanted-to-know-or-maybe-a-bit-less-7c8de164e423

It is possible to use setOnKeyListener. In this method, we can customize the input edittext !

try giving border in % for exapmle 0.1% according to your need.

It depends on the way your page behaves. If you want this to happens asynchronously, you have to use AJAX. Try out "jQuery post()" on Google to find some tuts.

In other case, if this will happen when a user submits a form, you can send the variable in an hidden field or append ?variableName=someValue" to then end of the URL you are opening. :

http://www.somesite.com/send.php?variableName=someValue

or

http://www.somesite.com/send.php?variableName=someValue&anotherVariable=anotherValue

This way, from PHP you can access this value as:

$phpVariableName = $_POST["variableName"];

for forms using POST method or:

$phpVariableName = $_GET["variableName"];

for forms using GET method or the append to url method I've mentioned above (querystring).

// in foo.h
class Foo {
    static const unsigned char* Msg;
};

// in foo.cpp
static const unsigned char Foo_Msg_data[] = {0x00,0x01};
const unsigned char* Foo::Msg = Foo_Msg_data;

Did you try

:set encoding=utf-8
:set fileencoding=utf-8

?

You had two options.

Option 1: simplest makefile = NO MAKEFILE.

Rename "a3driver.cpp" to "a3a.cpp", and then on the command line write:

nmake a3a.exe

And that's it. If you're using GNU Make, use "make" or "gmake" or whatever.

Option 2: a 2-line makefile.

a3a.exe: a3driver.obj
    link /out:a3a.exe a3driver.obj

Although I didn't use this exact function I got this same error.

In my case I just had to remove the protocol.

Instead of $uri = "http://api.hostip.info/?ip=$ip&position=true";

Use $uri = "api.hostip.info/?ip=$ip&position=true";

And it worked fine afterwards

Here we use onkeyup event in input field which triggered when the user releases a Key. And here we change our value to uppercase by toUpperCase() function.

Note that, text-transform="Uppercase" will only change the text in style. but not it's value. So,In order to change value, Use this inline code that will show as well as change the value

<input id="test-input" type="" name="" onkeyup="this.value = this.value.toUpperCase();">

Here is the code snippet that proved the value is change

<!DOCTYPE html>_x000D_
<html>_x000D_
<head>_x000D_
 <title></title>_x000D_
</head>_x000D_
<body>_x000D_
 <form method="get" action="">_x000D_
  <input id="test-input" type="" name="" onkeyup="this.value = this.value.toUpperCase();">_x000D_
  <input type="button" name="" value="Submit" onclick="checking()">_x000D_
 </form>_x000D_
 <script type="text/javascript">_x000D_
  function checking(argument) {_x000D_
   // body..._x000D_
   var x = document.getElementById("test-input").value_x000D_
   alert(x);_x000D_
  }_x000D_
  _x000D_
  _x000D_
 </script>_x000D_
</body>_x000D_
</html>

You would because defining an IList or an ICollection would open up for other implementations of your interfaces.

You might want to have an IOrderRepository that defines a collection of orders in either a IList or ICollection. You could then have different kinds of implementations to provide a list of orders as long as they conform to "rules" defined by your IList or ICollection.

There are many ways to achieve that, here is my favorite:

Layout:

<android.support.v7.widget.Toolbar
    android:id="@+id/toolbar"
    android:layout_width="match_parent"
    android:layout_height="?attr/actionBarSize"
    app:navigationIcon="?attr/homeAsUpIndicator" />

Activity:

    Toolbar toolbar = (Toolbar) findViewById(R.id.toolbar);

    toolbar.setNavigationOnClickListener(new View.OnClickListener() {
        @Override
        public void onClick(View v) {
            // back button pressed
        }
    });

You can use Smartface for developing your app with javascript and deploy to stores directly without a Mac. What they say is below.

With the Cloud Build module, Smartface removes all the hassle of application deployment. You don’t need to worry about managing code signing certificates and having a Mac to sign your apps. Smartface Cloud can store all your iOS certificates and Android keystores in one place and signing and building is fully in the cloud. No matter which operating system you use, you can get store-ready (or enterprise distribution) binaries. Smartface frees you from the lock-in to Mac and allows you to use your favorite operating system for development.

https://www.smartface.io/smartface/

If you are using Count, or have created your own Count-style dict and want to show the name of the item and the count of it, you can iterate around the dictionary like so:

top_10_words = Counter(my_long_list_of_words)
# Iterate around the dictionary
for word in top_10_words:
        # print the word
        print word[0]
        # print the count
        print word[1]

or to iterate through this in a template:

{% for word in top_10_words %}
        <p>Word: {{ word.0 }}</p>
        <p>Count: {{ word.1 }}</p>
{% endfor %}

Hope this helps someone

Use prop() for updating the hidden property, and change() for handling the change event.

$('#check').change(function() {_x000D_
  $("#delete").prop("hidden", !this.checked);_x000D_
})

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>_x000D_
<table>_x000D_
  <tr>_x000D_
    <td>_x000D_
      <input id="check" type="checkbox" name="del_attachment_id[]" value="<?php echo $attachment['link'];?>">_x000D_
    </td>_x000D_
_x000D_
    <td id="delete" hidden="true">_x000D_
      the file will be deleted from the newsletter_x000D_
    </td>_x000D_
  </tr>_x000D_
</table>

As per my understanding you want data in dictionary as shown below:

key1: value1-1,value1-2,value1-3....value100-1
key2: value2-1,value2-2,value2-3....value100-2
key3: value3-1,value3-2,value3-2....value100-3

for this you can use list for each dictionary keys:

case_list = {}
for entry in entries_list:
    if key in case_list:
        case_list[key1].append(value)
    else:
        case_list[key1] = [value]

var matrix = [];
for(var i=0; i<9; i++) {
    matrix[i] = new Array(9);
}

... or:

var matrix = [];
for(var i=0; i<9; i++) {
    matrix[i] = [];
    for(var j=0; j<9; j++) {
        matrix[i][j] = undefined;
    }
}

Regarding the suggestion So I would suggest that you use WebClient and investigate the causes of the 30 second delay.

From the answers for the question System.Net.WebClient unreasonably slow

Try setting Proxy = null;

WebClient wc = new WebClient(); wc.Proxy = null;

Credit to Alex Burtsev

You should be pointing it towards the Developer directory, not the Xcode application bundle. Run this:

sudo xcode-select --switch /Applications/Xcode.app/Contents/Developer

With recent versions of Xcode, you can go to Xcode ? Preferences… ? Locations and pick one of the options for Command Line Tools to set the location.

Up to date for 2020.

100% storyboard OR 100% code.

Here's the simplest possible explanation:

1. Have a blank full-screen scene

2. Add a scroll view. Control-drag from the scroll view to the base view, add left-right-top-bottom, all zero.

3. Add a stack view in the scroll view. Control-drag from the stack view to the scroll view, add left-right-top-bottom, all zero.

4. Put two or three labels inside the stack view.

For clarity, make the background color of the label red. Set the label height to 100.

5. Now set the width of each UILabel:

   Surprisingly, control-drag from the UILabel to the scroll view, not to the stack view, and select equal widths.

To repeat:

Don't control drag from the UILabel to the UILabel's parent - go to the grandparent. (In other words, go all the way to the scroll view, do not go to the stack view.)

It's that simple. That's the secret.

Secret tip - Apple bug:

It will not work with only one item! Add a few labels to make the demo work.

You're done.

Tip: You must add a height to every new item. Every item in any scrolling stack view must have either an intrinsic size (such as a label) or add an explicit height constraint.

The alternative approach:

In the above: surprisingly, set the widths of the UILabels to the width of the scroll view (not the stack view).

Alternately...

Drag from the stack view to the scroll view, and add a "width equal" constraint. This seems strange because you already pinned left-right, but that is how you do it. No matter how strange it seems that's the secret.

So you have two options:

1. Surprisingly, set the width of each item in the stack view to the width of the scrollview grandparent (not the stackview parent).

or

2. Surprisingly, set a "width equal" of the stackview to the scrollview - even though you do have the left and right edges of the stackview pinned to the scrollview anyway.

To be clear, do ONE of those methods, do NOT do both.

This should work:

Uri selectedUri = Uri.parse(Environment.getExternalStorageDirectory() + "/myFolder/");
Intent intent = new Intent(Intent.ACTION_VIEW);
intent.setDataAndType(selectedUri, "resource/folder");

if (intent.resolveActivityInfo(getPackageManager(), 0) != null)
{
    startActivity(intent);
}
else
{
    // if you reach this place, it means there is no any file 
    // explorer app installed on your device
}

Please, be sure that you have any file explorer app installed on your device.

EDIT: added a shantanu's recommendation from the comment.

LIBRARIES: You can also have a look at the following libraries https://android-arsenal.com/tag/35 if the current solution doesn't help you.

If anyone else runs into this, the issue we had was that we were making the ajax request from a link, and not preventing the link from being followed. So if you are doing this in an onclick attribute, make sure to return false; as well.

I had something similar and got it to work by effectively adding some padding-top to the child.

I'm sure some of the other answers here would get to the solution, but I couldn't get them to easily work after a lot of time; I instead ended up with the padding-top solution which is elegant in its simplicity, but seems kind of hackish to me (not to mention the pixel value it sets would probably depend on the parent height).

On the other thread C# naming convention for enum and matching property someone pointed out what I think is a very good idea:

"I know my suggestion goes against the .NET Naming conventions, but I personally prefix enums with 'E' and enum flags with 'F' (similar to how we prefix Interfaces with 'I')."

PyQt4 can be forced to use a new API in which QString is automatically converted to and from a Python object:

import sip
sip.setapi('QString', 2)

With this API, QtCore.QString class is no longer available and self.ui.comboBox.currentText() will return a Python string or unicode object.

See Selecting Incompatible APIs from the doc.

Question is asking for two different things:

1. An element has certain class
2. An element has certain style.

Second question has been already answered. For the first one, I would do it this way:

if($("#someElement").is(".test")){
    // Has class test assigned, eventually combined with other classes
}
else{
    // Does not have it
}

In ES6, you can simply utilize the Spread syntax.

Example:

let arr = ['a', 'b', 'c'];
let arr2 = [...arr];

Please note that the spread operator generates a completely new array, so modifying one won't affect the other.

Example:

arr2.push('d') // becomes ['a', 'b', 'c', 'd']
console.log(arr) // while arr retains its values ['a', 'b', 'c']

Right click -> TortoiseGit -> Settings -> Network
SSH client was pointing to C:\Program Files\TortoiseGit\bin\TortoisePlink.exe
Changed path to C:\Program Files (x86)\Git\bin\ssh.exe

You need to use some kind of file-transfer protocol (ftp, scp, etc), putty can't send remote files back to your computer. I use Win-SCP, which has a straightforward gui. Select SCP and you should be able to log in with the same ssh credentials and on the same port (probably 22) that you use with putty.

xml.etree.ElementTree vs. lxml

These are some pros of the two most used libraries I would have benefit to know before choosing between them.

xml.etree.ElementTree:

1. From the standard library: no needs of installing any module

lxml

1. Easily write XML declaration: for instance do you need to add standalone="no"?
2. Pretty printing: you can have a nice indented XML without extra code.
3. Objectify functionality: It allows you to use XML as if you were dealing with a normal Python object hierarchy.node.
4. sourceline allows to easily get the line of the XML element you are using.
5. you can use also a built-in XSD schema checker.

I solved the problem by cat'ing all the pems together:

cat cert.pem chain.pem fullchain.pem >all.pem
openssl pkcs12 -export -in all.pem -inkey privkey.pem -out cert_and_key.p12 -name tomcat -CAfile chain.pem -caname root -password MYPASSWORD
keytool -importkeystore -deststorepass MYPASSWORD -destkeypass MYPASSWORD -destkeystore MyDSKeyStore.jks -srckeystore cert_and_key.p12 -srcstoretype PKCS12 -srcstorepass MYPASSWORD -alias tomcat
keytool -import -trustcacerts -alias root -file chain.pem -keystore MyDSKeyStore.jks -storepass MYPASSWORD

(keytool didn't know what to do with a PKCS7 formatted key)

I got all the pems from letsencrypt

Update 2020:

You can now use Modern ECMAScript syntax thanks to V8 Runtime.

You can use includes():

var grade = itemResponse.getResponse();
if(grade.includes("9th")){do something}

You can use the fnSort function, see the details here:

http://datatables.net/api#fnSort

First convert all your pdf files to text files:

for file in *.pdf;do pdftotext "$file"; done

Then use grep as normal. This is especially good as it is fast when you have multiple queries and a lot of PDF files.

could you please try below code

<c:forEach var="hash" items="${map['key']}">
        <option><c:out value="${hash}"/></option>
  </c:forEach>

Suppose we want to find the string variable needle in the string variable haystack. There are three gotchas:

1. Internationalized applications should avoid string.toUpperCase and string.toLowerCase. Use a regular expression which ignores case instead. For example, var needleRegExp = new RegExp(needle, "i"); followed by needleRegExp.test(haystack).
2. In general, you might not know the value of needle. Be careful that needle does not contain any regular expression special characters. Escape these using needle.replace(/[-[\]{}()*+?.,\\^$|#\s]/g, "\\$&");.
3. In other cases, if you want to precisely match needle and haystack, just ignoring case, make sure to add "^" at the start and "$" at the end of your regular expression constructor.

Taking points (1) and (2) into consideration, an example would be:

var haystack = "A. BAIL. Of. Hay.";
var needle = "bail.";
var needleRegExp = new RegExp(needle.replace(/[-[\]{}()*+?.,\\^$|#\s]/g, "\\$&"), "i");
var result = needleRegExp.test(haystack);
if (result) {
    // Your code here
}

tl;dr

Use java.time.Instant class to parse text in standard ISO 8601 format, representing a moment in UTC.

Instant.parse( "2010-10-02T12:23:23Z" )

ISO 8601

That format is defined by the ISO 8601 standard for date-time string formats.

Both:

• java.time framework built into Java 8 and later (Tutorial)
• Joda-Time library

…use ISO 8601 formats by default for parsing and generating strings.

You should generally avoid using the old java.util.Date/.Calendar & java.text.SimpleDateFormat classes as they are notoriously troublesome, confusing, and flawed. If required for interoperating, you can convert to and fro.

java.time

Built into Java 8 and later is the new java.time framework. Inspired by Joda-Time, defined by JSR 310, and extended by the ThreeTen-Extra project.

Instant instant = Instant.parse( "2010-10-02T12:23:23Z" );  // `Instant` is always in UTC.

Convert to the old class.

java.util.Date date = java.util.Date.from( instant );  // Pass an `Instant` to the `from` method.

Time Zone

If needed, you can assign a time zone.

ZoneId zoneId = ZoneId.of( "America/Montreal" ); // Define a time zone rather than rely implicitly on JVM’s current default time zone.
ZonedDateTime zdt = ZonedDateTime.ofInstant( instant , zoneId );  // Assign a time zone adjustment from UTC.

Convert.

java.util.Date date = java.util.Date.from( zdt.toInstant() );  // Extract an `Instant` from the `ZonedDateTime` to pass to the `from` method.

Joda-Time

UPDATE: The Joda-Time project is now in maintenance mode. The team advises migration to the java.time classes.

Here is some example code in Joda-Time 2.8.

org.joda.time.DateTime dateTime_Utc = new DateTime( "2010-10-02T12:23:23Z" , DateTimeZone.UTC );  // Specifying a time zone to apply, rather than implicitly assigning the JVM’s current default.

Convert to old class. Note that the assigned time zone is lost in conversion, as j.u.Date cannot be assigned a time zone.

java.util.Date date = dateTime_Utc.toDate(); // The `toDate` method converts to old class.

Time Zone

If needed, you can assign a time zone.

DateTimeZone zone = DateTimeZone.forID( "America/Montreal" );
DateTime dateTime_Montreal = dateTime_Utc.withZone ( zone );

About java.time

The java.time framework is built into Java 8 and later. These classes supplant the troublesome old legacy date-time classes such as java.util.Date, Calendar, & SimpleDateFormat.

The Joda-Time project, now in maintenance mode, advises migration to the java.time classes.

To learn more, see the Oracle Tutorial. And search Stack Overflow for many examples and explanations. Specification is JSR 310.

You may exchange java.time objects directly with your database. Use a JDBC driver compliant with JDBC 4.2 or later. No need for strings, no need for java.sql.* classes.

Where to obtain the java.time classes?

• Java SE 8, Java SE 9, and later
  • Built-in.
  • Part of the standard Java API with a bundled implementation.
  • Java 9 adds some minor features and fixes.
• Java SE 6 and Java SE 7
  • Much of the java.time functionality is back-ported to Java 6 & 7 in ThreeTen-Backport.
• Android
  • Later versions of Android bundle implementations of the java.time classes.
  • For earlier Android (<26), the ThreeTenABP project adapts ThreeTen-Backport (mentioned above). See How to use ThreeTenABP….

The ThreeTen-Extra project extends java.time with additional classes. This project is a proving ground for possible future additions to java.time. You may find some useful classes here such as Interval, YearWeek, YearQuarter, and more.

your composer.phar should be placed in above way.

Kotlin has an one-liner

context.cacheDir.deleteRecursively()

1. Installing OpenCV 2.4.3

First, get OpenCV 2.4.3 from sourceforge.net. Its a self-extracting so just double click to start the installation. Install it in a directory, say C:\.

Wait until all files get extracted. It will create a new directory C:\opencv which contains OpenCV header files, libraries, code samples, etc.

Now you need to add the directory C:\opencv\build\x86\vc10\bin to your system PATH. This directory contains OpenCV DLLs required for running your code.

Open Control Panel → System → Advanced system settings → Advanced Tab → Environment variables...

On the System Variables section, select Path (1), Edit (2), and type C:\opencv\build\x86\vc10\bin; (3), then click Ok.

On some computers, you may need to restart your computer for the system to recognize the environment path variables.

This will completes the OpenCV 2.4.3 installation on your computer.

2. Create a new project and set up Visual C++

Open Visual C++ and select File → New → Project... → Visual C++ → Empty Project. Give a name for your project (e.g: cvtest) and set the project location (e.g: c:\projects).

Click Ok. Visual C++ will create an empty project.

Make sure that "Debug" is selected in the solution configuration combobox. Right-click cvtest and select Properties → VC++ Directories.

Select Include Directories to add a new entry and type C:\opencv\build\include.

Click Ok to close the dialog.

Back to the Property dialog, select Library Directories to add a new entry and type C:\opencv\build\x86\vc10\lib.

Click Ok to close the dialog.

Back to the property dialog, select Linker → Input → Additional Dependencies to add new entries. On the popup dialog, type the files below:

opencv_calib3d243d.lib
opencv_contrib243d.lib
opencv_core243d.lib
opencv_features2d243d.lib
opencv_flann243d.lib
opencv_gpu243d.lib
opencv_haartraining_engined.lib
opencv_highgui243d.lib
opencv_imgproc243d.lib
opencv_legacy243d.lib
opencv_ml243d.lib
opencv_nonfree243d.lib
opencv_objdetect243d.lib
opencv_photo243d.lib
opencv_stitching243d.lib
opencv_ts243d.lib
opencv_video243d.lib
opencv_videostab243d.lib

Note that the filenames end with "d" (for "debug"). Also note that if you have installed another version of OpenCV (say 2.4.9) these filenames will end with 249d instead of 243d (opencv_core249d.lib..etc).

Click Ok to close the dialog. Click Ok on the project properties dialog to save all settings.

NOTE:

These steps will configure Visual C++ for the "Debug" solution. For "Release" solution (optional), you need to repeat adding the OpenCV directories and in Additional Dependencies section, use:

opencv_core243.lib
opencv_imgproc243.lib
...

instead of:

opencv_core243d.lib
opencv_imgproc243d.lib
...

You've done setting up Visual C++, now is the time to write the real code. Right click your project and select Add → New Item... → Visual C++ → C++ File.

Name your file (e.g: loadimg.cpp) and click Ok. Type the code below in the editor:

#include <opencv2/highgui/highgui.hpp>
#include <iostream>

using namespace cv;
using namespace std;

int main()
{
    Mat im = imread("c:/full/path/to/lena.jpg");
    if (im.empty()) 
    {
        cout << "Cannot load image!" << endl;
        return -1;
    }
    imshow("Image", im);
    waitKey(0);
}

The code above will load c:\full\path\to\lena.jpg and display the image. You can use any image you like, just make sure the path to the image is correct.

Type F5 to compile the code, and it will display the image in a nice window.

And that is your first OpenCV program!

3. Where to go from here?

Now that your OpenCV environment is ready, what's next?

1. Go to the samples dir → c:\opencv\samples\cpp.
2. Read and compile some code.
3. Write your own code.

If you are on firefox install JSONovich. Not really a PHP solution I know, but it does the trick for development purposes/debugging.

using gawk exhibits the problem:

 gawk '{ print $NF-1, $NF}' filename
1 2
2 3
-1 one
-1 three
# cat filename
1 2
2 3
one
one two three

I just put gawk on Solaris 10 M4000: So, gawk is the cuplrit on the $NF-1 vs. $(NF-1) issue. Next question what does POSIX say? per:

http://www.opengroup.org/onlinepubs/009695399/utilities/awk.html

There is no direction one way or the other. Not good. gawk implies subtraction, other awks imply field number or subtraction. hmm.

Here I have written a few steps for How to Get RegID and Notification starting from scratch

1. Create/Register App on Google Cloud
2. Setup Cloud SDK with Development
3. Configure project for GCM
4. Get Device Registration ID
5. Send Push Notifications
6. Receive Push Notifications

You can find a complete tutorial here:

Getting Started with Android Push Notification : Latest Google Cloud Messaging (GCM) - step by step complete tutorial

Code snippet to get Registration ID (Device Token for Push Notification).

Configure project for GCM

Update AndroidManifest file

To enable GCM in our project we need to add a few permissions to our manifest file. Go to AndroidManifest.xml and add this code: Add Permissions

<uses-permission android:name="android.permission.INTERNET”/>
<uses-permission android:name="android.permission.GET_ACCOUNTS" />
<uses-permission android:name="android.permission.WAKE_LOCK" />

<uses-permission android:name="android.permission.VIBRATE" />

<uses-permission android:name=“.permission.RECEIVE" />
<uses-permission android:name=“<your_package_name_here>.permission.C2D_MESSAGE" />
<permission android:name=“<your_package_name_here>.permission.C2D_MESSAGE"
        android:protectionLevel="signature" />

Add GCM Broadcast Receiver declaration in your application tag:

<application
        <receiver
            android:name=".GcmBroadcastReceiver"
            android:permission="com.google.android.c2dm.permission.SEND" ]]>
            <intent-filter]]>
                <action android:name="com.google.android.c2dm.intent.RECEIVE" />
                <category android:name="" />
            </intent-filter]]>

        </receiver]]>
     
<application/>

Add GCM Service declaration

<application
     <service android:name=".GcmIntentService" />
<application/>

Get Registration ID (Device Token for Push Notification)

Now Go to your Launch/Splash Activity

Add Constants and Class Variables

private final static int PLAY_SERVICES_RESOLUTION_REQUEST = 9000;
public static final String EXTRA_MESSAGE = "message";
public static final String PROPERTY_REG_ID = "registration_id";
private static final String PROPERTY_APP_VERSION = "appVersion";
private final static String TAG = "LaunchActivity";
protected String SENDER_ID = "Your_sender_id";
private GoogleCloudMessaging gcm =null;
private String regid = null;
private Context context= null;

Update OnCreate and OnResume methods

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_launch);
    context = getApplicationContext();
    if (checkPlayServices()) {
        gcm = GoogleCloudMessaging.getInstance(this);
        regid = getRegistrationId(context);

        if (regid.isEmpty()) {
            registerInBackground();
        } else {
            Log.d(TAG, "No valid Google Play Services APK found.");
        }
    }
}

@Override
protected void onResume() {
    super.onResume();
    checkPlayServices();
}


// # Implement GCM Required methods(Add below methods in LaunchActivity)

private boolean checkPlayServices() {
    int resultCode = GooglePlayServicesUtil.isGooglePlayServicesAvailable(this);
    if (resultCode != ConnectionResult.SUCCESS) {
        if (GooglePlayServicesUtil.isUserRecoverableError(resultCode)) {
            GooglePlayServicesUtil.getErrorDialog(resultCode, this,
                PLAY_SERVICES_RESOLUTION_REQUEST).show();
        } else {
            Log.d(TAG, "This device is not supported - Google Play Services.");
            finish();
        }
        return false;
    }
    return true;
}

private String getRegistrationId(Context context) {
    final SharedPreferences prefs = getGCMPreferences(context);
    String registrationId = prefs.getString(PROPERTY_REG_ID, "");
    if (registrationId.isEmpty()) {
        Log.d(TAG, "Registration ID not found.");
        return "";
    }
    int registeredVersion = prefs.getInt(PROPERTY_APP_VERSION, Integer.MIN_VALUE);
    int currentVersion = getAppVersion(context);
    if (registeredVersion != currentVersion) {
        Log.d(TAG, "App version changed.");
        return "";
    }
    return registrationId;
}

private SharedPreferences getGCMPreferences(Context context) {
    return getSharedPreferences(LaunchActivity.class.getSimpleName(),
        Context.MODE_PRIVATE);
}

private static int getAppVersion(Context context) {
    try {
        PackageInfo packageInfo = context.getPackageManager()
            .getPackageInfo(context.getPackageName(), 0);
        return packageInfo.versionCode;
    } catch (NameNotFoundException e) {
        throw new RuntimeException("Could not get package name: " + e);
    }
}


private void registerInBackground() {
    new AsyncTask() {
        @Override
        protected Object doInBackground(Object...params) {
            String msg = "";
            try {
                if (gcm == null) {
                    gcm = GoogleCloudMessaging.getInstance(context);
                }
                regid = gcm.register(SENDER_ID);
                Log.d(TAG, "########################################");
                Log.d(TAG, "Current Device's Registration ID is: " + msg);
            } catch (IOException ex) {
                msg = "Error :" + ex.getMessage();
            }
            return null;
        }
        protected void onPostExecute(Object result) {
            //to do here
        };
    }.execute(null, null, null);
}

Note : please store REGISTRATION_KEY, it is important for sending PN Message to GCM. Also keep in mind: this key will be unique for all devices and GCM will send Push Notifications by REGISTRATION_KEY only.

You mentioned Ubuntu so I'm going to guess you installed the PostgreSQL packages from Ubuntu through apt.

If so, the postgres PostgreSQL user account already exists and is configured to be accessible via peer authentication for unix sockets in pg_hba.conf. You get to it by running commands as the postgres unix user, eg:

sudo -u postgres createuser owning_user
sudo -u postgres createdb -O owning_user dbname

This is all in the Ubuntu PostgreSQL documentation that's the first Google hit for "Ubuntu PostgreSQL" and is covered in numerous Stack Overflow questions.

(You've made this question a lot harder to answer by omitting details like the OS and version you're on, how you installed PostgreSQL, etc.)

You can use JTextArea and remove editing capabilities to get normal read-only multiline text.

JTextArea textArea = new JTextArea("line\nline\nline");
textArea.setEditable(false);

JTextArea

setEditable

git pull wants you to either remove or save your current work so that the merge it triggers doesn't cause conflicts with your uncommitted work. Note that you should only need to remove/save untracked files if the changes you're pulling create files in the same locations as your local uncommitted files.

Remove your uncommitted changes

Tracked files

git checkout -f

Untracked files

git clean -fd

Save your changes for later

Tracked files

git stash

Tracked files and untracked files

git stash -u

Reapply your latest stash after git pull:

git stash pop

I know this is an old post however thought I'd throw my simple solution into the mix since no one has suggested it.

I use the current directory to determine the current environment then flip the connection string and environment variable. This works great so long as you have a naming convention for your site folders such as test/beta/sandbox.

    protected override void OnConfiguring(DbContextOptionsBuilder optionsBuilder)
    {
        var dir = Environment.CurrentDirectory;
        string connectionString;

        if (dir.Contains("test", StringComparison.OrdinalIgnoreCase))
        {
            connectionString = new ConnectionStringBuilder(server: "xxx", database: "xxx").ConnectionString;
            Environment.SetEnvironmentVariable("ASPNETCORE_ENVIRONMENT", "Development");
        }
        else
        {
            connectionString = new ConnectionStringBuilder(server: "xxx", database: "xxx").ConnectionString;
            Environment.SetEnvironmentVariable("ASPNETCORE_ENVIRONMENT", "Production");
        }

        optionsBuilder.UseSqlServer(connectionString);
        optionsBuilder.UseLazyLoadingProxies();
        optionsBuilder.EnableSensitiveDataLogging();
    }

I just want to post my solution. Previous answers was pretty helpful for my research. I use length-stream to get the size of the stream, but the problem here is that the callback is fired near the end of the stream, so i also use stream-cache to cache the stream and pipe it to res object once i know the content-length. In case on an error,

var StreamCache = require('stream-cache');
var lengthStream = require('length-stream');

var _streamFile = function(res , stream , cb){
    var cache = new StreamCache();

    var lstream = lengthStream(function(length) {
        res.header("Content-Length", length);
        cache.pipe(res);
    });

    stream.on('error', function(err){
        return cb(err);
    });

    stream.on('end', function(){
        return cb(null , true);
    });

    return stream.pipe(lstream).pipe(cache);
}

If you actually want the answer back as a string as opposed to a byte array, you could always do something like this:

String plaintext = "your text here";
MessageDigest m = MessageDigest.getInstance("MD5");
m.reset();
m.update(plaintext.getBytes());
byte[] digest = m.digest();
BigInteger bigInt = new BigInteger(1,digest);
String hashtext = bigInt.toString(16);
// Now we need to zero pad it if you actually want the full 32 chars.
while(hashtext.length() < 32 ){
  hashtext = "0"+hashtext;
}

Go to apache-tomcat\conf folder add these lines in

tomcat-users.xml file

<role rolename="manager-gui"/>
<user username="admin" password="admin" roles="manager-gui"/>

and restart server

While the defaultDate does not set the widget. What is needed is something like:

$(".datepicker").datepicker({
    showButtonPanel: true,
    numberOfMonths: 2

});

$(".datepicker[value='']").datepicker("setDate", "-0d"); 

keywords = [1,2,3,4];
doc.array.pull(1) //this remove one item from a array
doc.array.pull(...keywords) // this remove multiple items in a array

if you want to use ... you should call 'use strict'; at the top of your js file; :)

Found the port esp32 was connected to by -

ls /dev/*

You would get a long list and you can find the port you need

I have a minor improvement on Ross Drew's answer.

For a small array, a simple loop is faster than the System.arraycopy approach, because of the overhead associated with setting up System.arraycopy. Therefore, it's better to fill the first few bytes of the array using a simple loop, and only move to System.arraycopy when the filled array has a certain size.

The optimal size of the initial loop will be JVM specific and system specific of course.

private static final int SMALL = 16;

public static void arrayFill(byte[] array, byte value) {
  int len = array.length;
  int lenB = len < SMALL ? len : SMALL;

  for (int i = 0; i < lenB; i++) {
    array[i] = value;
  }

  for (int i = SMALL; i < len; i += i) {
    System.arraycopy(array, 0, array, i, len < i + i ? len - i : i);
  }
}

You need to include the reference to the assembly System.Web.Mvc in you project.

you may not have the System.Web.Mvc in your C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework.NETFramework\v4.0

So you need to add it and then to include it as reference to your projrect

There is no generic type which will tell the compiler that a method returns nothing.

I believe the convention is to use Object when inheriting as a type parameter

OR

Propagate the type parameter up and then let users of your class instantiate using Object and assigning the object to a variable typed using a type-wildcard ?:

interface B<E>{ E method(); }

class A<T> implements B<T>{

    public T method(){
        // do something
        return null;
    }
}

A<?> a = new A<Object>();

Just use if and env.BRANCH_NAME, example:

    if (env.BRANCH_NAME == "deployment") {                                          
        ... do some build ...
    } else {                                   
        ... do something else ...
    }                                                                       

I was facing the same issue and what I tried is as below.

1. Clean the project (Right click on pom.xml and clean)
2. And update the maven project (Project > Maven > Update Maven Project)

This solved the issue.

for AndroidX use like

<com.google.android.material.floatingactionbutton.FloatingActionButton
    android:layout_width="wrap_content"
    android:layout_height="wrap_content"
    app:srcCompat="@drawable/ic_add" />

No.

The content-type should be whatever it is known to be, if you know it. application/octet-stream is defined as "arbitrary binary data" in RFC 2046, and there's a definite overlap here of it being appropriate for entities whose sole intended purpose is to be saved to disk, and from that point on be outside of anything "webby". Or to look at it from another direction; the only thing one can safely do with application/octet-stream is to save it to file and hope someone else knows what it's for.

You can combine the use of Content-Disposition with other content-types, such as image/png or even text/html to indicate you want saving rather than display. It used to be the case that some browsers would ignore it in the case of text/html but I think this was some long time ago at this point (and I'm going to bed soon so I'm not going to start testing a whole bunch of browsers right now; maybe later).

RFC 2616 also mentions the possibility of extension tokens, and these days most browsers recognise inline to mean you do want the entity displayed if possible (that is, if it's a type the browser knows how to display, otherwise it's got no choice in the matter). This is of course the default behaviour anyway, but it means that you can include the filename part of the header, which browsers will use (perhaps with some adjustment so file-extensions match local system norms for the content-type in question, perhaps not) as the suggestion if the user tries to save.

Hence:

Content-Type: application/octet-stream
Content-Disposition: attachment; filename="picture.png"

Means "I don't know what the hell this is. Please save it as a file, preferably named picture.png".

Content-Type: image/png
Content-Disposition: attachment; filename="picture.png"

Means "This is a PNG image. Please save it as a file, preferably named picture.png".

Content-Type: image/png
Content-Disposition: inline; filename="picture.png"

Means "This is a PNG image. Please display it unless you don't know how to display PNG images. Otherwise, or if the user chooses to save it, we recommend the name picture.png for the file you save it as".

Of those browsers that recognise inline some would always use it, while others would use it if the user had selected "save link as" but not if they'd selected "save" while viewing (or at least IE used to be like that, it may have changed some years ago).

An oblique answer to the question is to write all the code as classes, apart from the index.php files, which are then the only points of entry. PHP files that contain classes will not cause anything to happen, even if they are invoked directly through Apache.

A direct answer is to include the following in .htaccess:

<FilesMatch "\.php$">
    Order Allow,Deny
    Deny from all
</FilesMatch>
<FilesMatch "index[0-9]?\.php$">
    Order Allow,Deny
    Allow from all
</FilesMatch>

This will allow any file like index.php, index2.php etc to be accessed, but will refuse access of any kind to other .php files. It will not affect other file types.

I used ASIHTTPRequest a lot like Jane Sales answer but it is not under development anymore and the author suggests using other libraries like AFNetworking.

Honestly, I think now is the time to start looking elsewhere.

AFNetworking works great, and let you work with blocks a lot (which is a great relief).

Here's an image upload example from their documentation page on github:

NSURL *url = [NSURL URLWithString:@"http://api-base-url.com"];
AFHTTPClient *httpClient = [[AFHTTPClient alloc] initWithBaseURL:url];
NSData *imageData = UIImageJPEGRepresentation([UIImage imageNamed:@"avatar.jpg"], 0.5);
NSMutableURLRequest *request = [httpClient multipartFormRequestWithMethod:@"POST" path:@"/upload" parameters:nil constructingBodyWithBlock: ^(id <AFMultipartFormData>formData) {
    [formData appendPartWithFileData:imageData name:@"avatar" fileName:@"avatar.jpg" mimeType:@"image/jpeg"];
}];

AFHTTPRequestOperation *operation = [[AFHTTPRequestOperation alloc] initWithRequest:request];
[operation setUploadProgressBlock:^(NSUInteger bytesWritten, long long totalBytesWritten, long long totalBytesExpectedToWrite) {
    NSLog(@"Sent %lld of %lld bytes", totalBytesWritten, totalBytesExpectedToWrite);
}];
[httpClient enqueueHTTPRequestOperation:operation];

Standard WCF Tracing/Diagnostics

If for some reason you are unable to get Fiddler to work, or would rather log the requests another way, another option is to use the standard WCF tracing functionality. This will produce a file that has a nice viewer.

Docs

See https://docs.microsoft.com/en-us/dotnet/framework/wcf/samples/tracing-and-message-logging

Configuration

Add the following to your config, make sure c:\logs exists, rebuild, and make requests:

  <system.serviceModel>
    <diagnostics>
      <!-- Enable Message Logging here. -->
      <!-- log all messages received or sent at the transport or service model levels -->
      <messageLogging logEntireMessage="true"
                      maxMessagesToLog="300"
                      logMessagesAtServiceLevel="true"
                      logMalformedMessages="true"
                      logMessagesAtTransportLevel="true" />
    </diagnostics>
  </system.serviceModel>

  <system.diagnostics>
    <sources>
      <source name="System.ServiceModel" switchValue="Information,ActivityTracing"
        propagateActivity="true">
        <listeners>
          <add name="xml" />
        </listeners>
      </source>
      <source name="System.ServiceModel.MessageLogging">
        <listeners>
          <add name="xml" />
        </listeners>
      </source>
    </sources>
    <sharedListeners>
      <add initializeData="C:\logs\TracingAndLogging-client.svclog" type="System.Diagnostics.XmlWriterTraceListener"
        name="xml" />
    </sharedListeners>
    <trace autoflush="true" />
  </system.diagnostics>

Just wanted to add an important piece of information that I believe was left out perhaps with the assumption that the ones seeking answers might already know. This problem happens a lot and I too found myself stuck when I tried to implement the viewAlert method for the buttons of the UIAlertView message. To do this you need to 1st add the delegate class which may look something like this:

@interface YourViewController : UIViewController <UIAlertViewDelegate>

Also you can find a very helpful tutorial here!

Hope this helps.

I would put this as a comment, but I don't have the rep for it. What Josh Crozier answered is correct, but for IE .cur and .ani are the only supported formats for this. So you should probably have a fallback just in case:

.test {
    cursor:url("http://www.javascriptkit.com/dhtmltutors/cursor-hand.gif"), url(foo.cur), auto;
}

I was having a similar problem. (No problems training with GradientDescent optimizer, but error raised when using to Adam Optimizer, or any other optimizer with its own variables)

Changing to an interactive session solved this problem for me.

sess = tf.Session()

into

sess = tf.InteractiveSession()

"Correct" is a dangerous word in Ruby. There's usually more than one way to do anything. If you know you'll always want that default value for that column on that table, setting them in a DB migration file is the easiest way:

class SetDefault < ActiveRecord::Migration
  def self.up
    change_column :people, :last_name, :type, :default => "Doe"
  end

  def self.down
    # You can't currently remove default values in Rails
    raise ActiveRecord::IrreversibleMigration, "Can't remove the default"
  end
end

Because ActiveRecord autodiscovers your table and column properties, this will cause the same default to be set in any model using it in any standard Rails app.

However, if you only want default values set in specific cases -- say, it's an inherited model that shares a table with some others -- then another elegant way is do it directly in your Rails code when the model object is created:

class GenericPerson < Person
  def initialize(attributes=nil)
    attr_with_defaults = {:last_name => "Doe"}.merge(attributes)
    super(attr_with_defaults)
  end
end

Then, when you do a GenericPerson.new(), it'll always trickle the "Doe" attribute up to Person.new() unless you override it with something else.

You could just use the bound ng-model (answers[item.questID]) value itself in your ng-change method to detect if it has been checked or not.

Example:-

<input type="checkbox" ng-model="answers[item.questID]" 
     ng-change="stateChanged(item.questID)" /> <!-- Pass the specific id -->

and

$scope.stateChanged = function (qId) {
   if($scope.answers[qId]){ //If it is checked
       alert('test');
   }
}

ls whateveryouwant | xargs -n 1 basename

Does that work for you?

Otherwise you can (cd /the/directory && ls) (yes, parentheses intended)

The different between getTextBounds and measureText is described with the image below.

In short,

1. getTextBounds is to get the RECT of the exact text. The measureText is the length of the text, including the extra gap on the left and right.

2. If there are spaces between the text, it is measured in measureText but not including in the length of the TextBounds, although the coordinate get shifted.

3. The text could be tilted (Skew) left. In this case, the bounding box left side would exceed outside the measurement of the measureText, and the overall length of the text bound would be bigger than measureText

4. The text could be tilted (Skew) right. In this case, the bounding box right side would exceed outside the measurement of the measureText, and the overall length of the text bound would be bigger than measureText

Native way to get the mimetype:

For PHP < 5.3 use mime_content_type()
For PHP >= 5.3 use finfo_open() or mime_content_type()

Alternatives to get the MimeType are exif_imagetype and getimagesize, but these rely on having the appropriate libs installed. In addition, they will likely just return image mimetypes, instead of the whole list given in magic.mime.

While mime_content_type is available from PHP 4.3 and is part of the FileInfo extension (which is enabled by default since PHP 5.3, except for Windows platforms, where it must be enabled manually, for details see here).

If you don't want to bother about what is available on your system, just wrap all four functions into a proxy method that delegates the function call to whatever is available, e.g.

function getMimeType($filename)
{
    $mimetype = false;
    if(function_exists('finfo_open')) {
        // open with FileInfo
    } elseif(function_exists('getimagesize')) {
        // open with GD
    } elseif(function_exists('exif_imagetype')) {
       // open with EXIF
    } elseif(function_exists('mime_content_type')) {
       $mimetype = mime_content_type($filename);
    }
    return $mimetype;
}

With Java:

For int values:

public static int[] primeFactors(int value) {
    int[] a = new int[31];
    int i = 0, j;
    int num = value;
    while (num % 2 == 0) {
        a[i++] = 2;
        num /= 2;
    }
    j = 3;
    while (j <= Math.sqrt(num) + 1) {
        if (num % j == 0) {
            a[i++] = j;
            num /= j;
        } else {
            j += 2;
        }
    }
    if (num > 1) {
        a[i++] = num;
    }
    int[] b = Arrays.copyOf(a, i);
    return b;
}

For long values:

static long[] getFactors(long value) {
    long[] a = new long[63];
    int i = 0;
    long num = value;
    while (num % 2 == 0) {
        a[i++] = 2;
        num /= 2;
    }
    long j = 3;
    while (j <= Math.sqrt(num) + 1) {
        if (num % j == 0) {
            a[i++] = j;
            num /= j;
        } else {
            j += 2;
        }
    }
    if (num > 1) {
        a[i++] = num;
    }
    long[] b = Arrays.copyOf(a, i);
    return b;
}

2018-10-29 EDIT

Thank you for the comments.

I tested several kinds of code to get the number of lines in a csv file in terms of speed. The best method is below.

with open(filename) as f:
    sum(1 for line in f)

Here is the code tested.

import timeit
import csv
import pandas as pd

filename = './sample_submission.csv'

def talktime(filename, funcname, func):
    print(f"# {funcname}")
    t = timeit.timeit(f'{funcname}("{filename}")', setup=f'from __main__ import {funcname}', number = 100) / 100
    print('Elapsed time : ', t)
    print('n = ', func(filename))
    print('\n')

def sum1forline(filename):
    with open(filename) as f:
        return sum(1 for line in f)
talktime(filename, 'sum1forline', sum1forline)

def lenopenreadlines(filename):
    with open(filename) as f:
        return len(f.readlines())
talktime(filename, 'lenopenreadlines', lenopenreadlines)

def lenpd(filename):
    return len(pd.read_csv(filename)) + 1
talktime(filename, 'lenpd', lenpd)

def csvreaderfor(filename):
    cnt = 0
    with open(filename) as f:
        cr = csv.reader(f)
        for row in cr:
            cnt += 1
    return cnt
talktime(filename, 'csvreaderfor', csvreaderfor)

def openenum(filename):
    cnt = 0
    with open(filename) as f:
        for i, line in enumerate(f,1):
            cnt += 1
    return cnt
talktime(filename, 'openenum', openenum)

The result was below.

# sum1forline
Elapsed time :  0.6327946722068599
n =  2528244


# lenopenreadlines
Elapsed time :  0.655304473598555
n =  2528244


# lenpd
Elapsed time :  0.7561274056295324
n =  2528244


# csvreaderfor
Elapsed time :  1.5571560935772661
n =  2528244


# openenum
Elapsed time :  0.773000013928679
n =  2528244

In conclusion, sum(1 for line in f) is fastest. But there might not be significant difference from len(f.readlines()).

sample_submission.csv is 30.2MB and has 31 million characters.

have a look at http://au.php.net/reserved.variables

I think the variable you are looking for is: $_SERVER["DOCUMENT_ROOT"]

Just want to update, that in Spring 5, as mentioned in Spring docs, Spring supports 6 scopes, four of which are available only if you use a web-aware ApplicationContext.

singleton (Default) Scopes a single bean definition to a single object instance per Spring IoC container.

prototype Scopes a single bean definition to any number of object instances.

request Scopes a single bean definition to the lifecycle of a single HTTP request; that is, each HTTP request has its own instance of a bean created off the back of a single bean definition. Only valid in the context of a web-aware Spring ApplicationContext.

session Scopes a single bean definition to the lifecycle of an HTTP Session. Only valid in the context of a web-aware Spring ApplicationContext.

application Scopes a single bean definition to the lifecycle of a ServletContext. Only valid in the context of a web-aware Spring ApplicationContext.

websocket Scopes a single bean definition to the lifecycle of a WebSocket. Only valid in the context of a web-aware Spring ApplicationContext.

Visual Studio 2013: Yes to both adding to the watch windows during debugging and dragging variables or typing them in without "user::". But before any of that would work I also needed to go to Tools > Options, then Debugging > General and had to scroll right down to the bottom of the right hand pane to be able to tick "Use Managed Compatibility Mode". Then I had to stop and restart debugging. Finally the above advice worked. Many thanks to the above and to this article: Visual Studio 2015 Debugging: Can't expand local variables?

When you join the new thread in the main thread, it will wait until the thread finishes, so the GUI will block even though you are using multithreading.

If you want to place the logic portion in a different class, you can subclass Thread directly, and then start a new object of this class when you press the button. The constructor of this subclass of Thread can receive a Queue object and then you will be able to communicate it with the GUI part. So my suggestion is:

1. Create a Queue object in the main thread
2. Create a new thread with access to that queue
3. Check periodically the queue in the main thread

Then you have to solve the problem of what happens if the user clicks two times the same button (it will spawn a new thread with each click), but you can fix it by disabling the start button and enabling it again after you call self.prog_bar.stop().

import Queue

class GUI:
    # ...

    def tb_click(self):
        self.progress()
        self.prog_bar.start()
        self.queue = Queue.Queue()
        ThreadedTask(self.queue).start()
        self.master.after(100, self.process_queue)

    def process_queue(self):
        try:
            msg = self.queue.get(0)
            # Show result of the task if needed
            self.prog_bar.stop()
        except Queue.Empty:
            self.master.after(100, self.process_queue)

class ThreadedTask(threading.Thread):
    def __init__(self, queue):
        threading.Thread.__init__(self)
        self.queue = queue
    def run(self):
        time.sleep(5)  # Simulate long running process
        self.queue.put("Task finished")

With ECMAScript 2015 you can export and import multiple classes like this

class Person
{
    constructor()
    {
        this.type = "Person";
    }
}

class Animal{
    constructor()
    {
        this.type = "Animal";
    }
}

module.exports = {
    Person,
    Animal
};

then where you use them:

const { Animal, Person } = require("classes");

const animal = new Animal();
const person = new Person();

In case of name collisions, or you prefer other names you can rename them like this:

const { Animal : OtherAnimal, Person : OtherPerson} = require("./classes");

const animal = new OtherAnimal();
const person = new OtherPerson();

To get rid of the white color you have to set the background-color to transparent:

button {
  font-size: 18px;
  border: 2px solid #AD235E;
  border-radius: 100px;
  width: 150px;
  height: 150px;
  background-color: transparent; /* like this */
}

You can do this using the query builder. Just use SELECT instead of TABLE and GET.

DB::select('select * from user where name = ?',['Jhon']);

Notes: 1. Multiple question marks are allowed. 2. The second parameter must be an array, even if there is only one parameter. 3. Laravel will automatically clean parameters, so you don't have to.

Further info here: http://laravel.com/docs/5.0/database#running-queries

Hmmmmmm, turns out that still returns a standard class for me when I don't use a where clause. I found this helped:

foreach($results as $result)
{
print_r(get_object_vars($result));
}

However, get_object_vars isn't recursive, so don't use it on $results.

Try these:

#dialog_style1 .ui-dialog-titlebar { display:none; }
#dialog_style2 .ui-dialog-titlebar { color:#aaa; }

The best recommendation I can give for you is to load the page in Firefox, open the dialog and inspect it with Firebug, then try different selectors in the console, and see what works. You may need to use some of the other descendant selectors.

Actually I do this myself. I have a table called 'Comments' which contains comments for records in 3 other tables. Neither solution actually handles everything you probably want it to. In your case, you would do this:

Solution 1:

1. Add a tinyint field to employees_ce and employees_sn that has a default value which is different in each table (This field represents a 'table identifier', so we'll call them tid_ce & tid_sn)

2. Create a Unique Index on each table using the table's PK and the table id field.

3. Add a tinyint field to your 'Deductions' table to store the second half of the foreign key (the Table ID)

4. Create 2 foreign keys in your 'Deductions' table (You can't enforce referential integrity, because either one key will be valid or the other...but never both:

   ALTER TABLE [dbo].[Deductions]  WITH NOCHECK ADD  CONSTRAINT [FK_Deductions_employees_ce] FOREIGN KEY([id], [fk_tid])
   REFERENCES [dbo].[employees_ce] ([empid], [tid])
   NOT FOR REPLICATION 
   GO
   ALTER TABLE [dbo].[Deductions] NOCHECK CONSTRAINT [FK_600_WorkComments_employees_ce]
   GO
   ALTER TABLE [dbo].[Deductions]  WITH NOCHECK ADD  CONSTRAINT [FK_Deductions_employees_sn] FOREIGN KEY([id], [fk_tid])
   REFERENCES [dbo].[employees_sn] ([empid], [tid])
   NOT FOR REPLICATION 
   GO
   ALTER TABLE [dbo].[Deductions] NOCHECK CONSTRAINT [FK_600_WorkComments_employees_sn]
   GO
   
   employees_ce
   --------------
   empid    name     tid
   khce1   prince    1
   
   employees_sn
   ----------------
   empid    name     tid 
   khsn1   princess  2
   
   deductions
   ----------------------
   id      tid       name  
   khce1   1         gold
   khsn1   2         silver         
   ** id + tid creates a unique index **
   

Solution 2: This solution allows referential integrity to be maintained: 1. Create a second foreign key field in 'Deductions' table , allow Null values in both foreign keys, and create normal foreign keys:

    employees_ce
    --------------
    empid   name
    khce1   prince 

    employees_sn
    ----------------
    empid   name     
    khsn1   princess 

    deductions
    ----------------------
    idce    idsn      name  
    khce1   *NULL*    gold
    *NULL*  khsn1     silver         

Integrity is only checked if the column is not null, so you can maintain referential integrity.

c can be used on lists (and not only on vectors):

# you have
l1 = list(2, 3)
l2 = list(4)

# you want
list(2, 3, 4)
[[1]]
[1] 2

[[2]]
[1] 3

[[3]]
[1] 4

# you can do
c(l1, l2)
[[1]]
[1] 2

[[2]]
[1] 3

[[3]]
[1] 4

If you have a list of lists, you can do it (perhaps) more comfortably with do.call, eg:

do.call(c, list(l1, l2))

An alternative, but a bit slower alternative is to do it over indexing.

np.isnan(data)[np.isnan(data) == False].size

In [30]: %timeit np.isnan(data)[np.isnan(data) == False].size
1 loops, best of 3: 498 ms per loop 

The double use of np.isnan(data) and the == operator might be a bit overkill and so I posted the answer only for completeness.

df = df.loc[:, ~df.columns.str.contains('^Unnamed')]

In [162]: df
Out[162]:
   colA  ColB  colC  colD  colE  colF  colG
0    44    45    26    26    40    26    46
1    47    16    38    47    48    22    37
2    19    28    36    18    40    18    46
3    50    14    12    33    12    44    23
4    39    47    16    42    33    48    38

if the first column in the CSV file has index values, then you can do this instead:

df = pd.read_csv('data.csv', index_col=0)

Edit: The answer marked as "correct" is not correct.

It's easy to do. Try this code, swapping out "ie.jpg" with whatever picture you have handy:

<!DOCTYPE HTML>
<html>
    <head>
        <script>
            var canvas;
            var context;
            var ga = 0.0;
            var timerId = 0;
            
            function init()
            {
                canvas = document.getElementById("myCanvas");
                context = canvas.getContext("2d");
                timerId = setInterval("fadeIn()", 100);
            }
            
            function fadeIn()
            {
                context.clearRect(0,0, canvas.width,canvas.height);
                context.globalAlpha = ga;
                var ie = new Image();
                ie.onload = function()
                {
                    context.drawImage(ie, 0, 0, 100, 100);
                };
                ie.src = "ie.jpg";
                
                ga = ga + 0.1;
                if (ga > 1.0)
                {
                    goingUp = false;
                    clearInterval(timerId);
                }
            }
        </script>
    </head>
    <body onload="init()">
        <canvas height="200" width="300" id="myCanvas"></canvas>
    </body>
</html>

The key is the globalAlpha property.

Tested with IE 9, FF 5, Safari 5, and Chrome 12 on Win7.

Here this very usefull For Bootstrap Toggle Button . Example in code snippet!! and jsfiddle below.

  <script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
    <link href="https://gitcdn.github.io/bootstrap-toggle/2.2.2/css/bootstrap-toggle.min.css" rel="stylesheet">_x000D_
    <script src="https://gitcdn.github.io/bootstrap-toggle/2.2.2/js/bootstrap-toggle.min.js"></script>_x000D_
    <link href="https://maxcdn.bootstrapcdn.com/bootstrap/3.2.0/css/bootstrap.min.css" rel="stylesheet">_x000D_
    <input id="toggle-trigger" type="checkbox" checked data-toggle="toggle">_x000D_
    <button class="btn btn-success" onclick="toggleOn()">On by API</button>_x000D_
<button class="btn btn-danger" onclick="toggleOff()">Off by API</button>_x000D_
<button class="btn btn-primary" onclick="getValue()">Get Value</button>_x000D_
<script>_x000D_
  //If you want to change it dynamically_x000D_
  function toggleOn() {_x000D_
    $('#toggle-trigger').bootstrapToggle('on')_x000D_
  }_x000D_
  function toggleOff() {_x000D_
    $('#toggle-trigger').bootstrapToggle('off')  _x000D_
  }_x000D_
  //if you want get value_x000D_
  function getValue()_x000D_
  {_x000D_
   var value=$('#toggle-trigger').bootstrapToggle().prop('checked');_x000D_
   console.log(value);_x000D_
  }_x000D_
</script>

Update 2020 For Bootstrap 4

I recommended bootstrap4-toggle in 2020.

<link rel="stylesheet" href="https://stackpath.bootstrapcdn.com/bootstrap/4.4.1/css/bootstrap.min.css" integrity="sha384-Vkoo8x4CGsO3+Hhxv8T/Q5PaXtkKtu6ug5TOeNV6gBiFeWPGFN9MuhOf23Q9Ifjh" crossorigin="anonymous">_x000D_
_x000D_
<script src="https://code.jquery.com/jquery-3.4.1.slim.min.js" integrity="sha384-J6qa4849blE2+poT4WnyKhv5vZF5SrPo0iEjwBvKU7imGFAV0wwj1yYfoRSJoZ+n" crossorigin="anonymous"></script>_x000D_
<script src="https://cdn.jsdelivr.net/npm/[email protected]/dist/umd/popper.min.js" integrity="sha384-Q6E9RHvbIyZFJoft+2mJbHaEWldlvI9IOYy5n3zV9zzTtmI3UksdQRVvoxMfooAo" crossorigin="anonymous"></script>_x000D_
<script src="https://stackpath.bootstrapcdn.com/bootstrap/4.4.1/js/bootstrap.min.js" integrity="sha384-wfSDF2E50Y2D1uUdj0O3uMBJnjuUD4Ih7YwaYd1iqfktj0Uod8GCExl3Og8ifwB6" crossorigin="anonymous"></script>_x000D_
_x000D_
<link href="https://cdn.jsdelivr.net/gh/gitbrent/[email protected]/css/bootstrap4-toggle.min.css" rel="stylesheet">_x000D_
<script src="https://cdn.jsdelivr.net/gh/gitbrent/[email protected]/js/bootstrap4-toggle.min.js"></script>_x000D_
_x000D_
<input id="toggle-trigger" type="checkbox" checked data-toggle="toggle" data-onstyle="success">_x000D_
<button class="btn btn-success" onclick="toggleOn()">On by API</button>_x000D_
<button class="btn btn-danger" onclick="toggleOff()">Off by API</button>_x000D_
<button class="btn btn-primary" onclick="getValue()">Get Value</button>_x000D_
_x000D_
<script>_x000D_
  //If you want to change it dynamically_x000D_
  function toggleOn() {_x000D_
    $('#toggle-trigger').bootstrapToggle('on')_x000D_
  }_x000D_
  function toggleOff() {_x000D_
    $('#toggle-trigger').bootstrapToggle('off')  _x000D_
  }_x000D_
  //if you want get value_x000D_
  function getValue()_x000D_
  {_x000D_
   var value=$('#toggle-trigger').bootstrapToggle().prop('checked');_x000D_
   console.log(value);_x000D_
  }_x000D_
</script>

unnest2() as exercise

Older versions before pg v8.4 need a user-defined unnest(). We can adapt this old function to return elements with an index:

CREATE FUNCTION unnest2(anyarray)
  RETURNS setof record  AS
$BODY$
  SELECT $1[i], i
  FROM   generate_series(array_lower($1,1),
                         array_upper($1,1)) i;
$BODY$ LANGUAGE sql IMMUTABLE;

As Jeppe Stig Nielsen said, this thread already has great answers, but I thought this rather obvious subtlety was worth mentioning too.

using directives specified inside namespaces can make for shorter code since they don't need to be fully qualified as when they're specified on the outside.

The following example works because the types Foo and Bar are both in the same global namespace, Outer.

Presume the code file Foo.cs:

namespace Outer.Inner
{
    class Foo { }
}

And Bar.cs:

namespace Outer
{
    using Outer.Inner;

    class Bar
    {
        public Foo foo;
    }
}

That may omit the outer namespace in the using directive, for short:

namespace Outer
{
    using Inner;

    class Bar
    {
        public Foo foo;
    }
}

You have to specify the width to the body for it to center on the page.

Or put all the content in the div and center it.

<body>
    <div>
    jhfgdfjh
    </div>
</body>?

div {
    margin: 0px auto;
    width:400px;
}

?

If you are in .NET stack with MVC with AngularJS, this is what you have to do to remove the '#' from url:

1. Set up your base href in your _Layout page: <head> <base href="/"> </head>

2. Then, add following in your angular app config : $locationProvider.html5Mode(true)

3. Above will remove '#' from url but page refresh won't work e.g. if you are in "yoursite.com/about" page refreash will give you a 404. This is because MVC does not know about angular routing and by MVC pattern it will look for a MVC page for 'about' which does not exists in MVC routing path. Workaround for this is to send all MVC page request to a single MVC view and you can do that by adding a route that catches all

url:

routes.MapRoute(
    name: "App",
    url: "{*url}",
    defaults: new {
        controller = "Home", action = "Index"
    }
);

You should use webpack here to make your life easier. Add below rule in your config:

const srcPath = path.join(__dirname, '..', 'publicfolder')

const rules = []

const includePaths = [
  srcPath
]
    // handle images
    rules.push({
      test: /\.(png|gif|jpe?g|svg|ico)$/,
      include: includePaths,
      use: [{
        loader: 'file-loader',
        options: {
          name: 'images/[name]-[hash].[ext]'
        }
      }

After this, you can simply import the images into your react components:

import myImage from 'publicfolder/images/Image1.png'

Use myImage like below:

<div><img src={myImage}/></div>

or if the image is imported into local state of component

<div><img src={this.state.myImage}/></div> 

Try this:

try:
    blah()
except:
    pass

If you only want a printf-like syntax (without calling printf yourself), have a look at Boost Format.

actually during the installation process.it will prompt u to enter the password..At the last step of installation, a window will appear showing cloning database files..After copying,there will be a option..like password managament..there we hav to set our password..and user name will be default..

okay one other solution that I thought of just for the fun of it would be to turn your decimal into a string and then cut the string into 2 strings, one containing the point and the decimals and the other containing the Int to the left of the point. after that you limit the String of the point and decimals to 3 chars, one for the decimal point and the others for the decimals. then just recombine.

double shippingCost = ((nCartons * 1.44) + (lbs + 1) * 0.96) + 3.0;
String ShippingCost = (String) shippingCost;
String decimalCost = ShippingCost.subString(indexOf('.'),ShippingCost.Length());
ShippingCost = ShippingCost.subString(0,indexOf('.'));
ShippingCost = ShippingCost + decimalCost;

There! Simple, right?

This code can sort a key-value map in both orders i.e. ascending and descending.

<K, V extends Comparable<V>> Map<K, V> sortByValues
     (final Map<K, V> map, int ascending)
{
     Comparator<K> valueComparator =  new Comparator<K>() {         
        private int ascending;
        public int compare(K k1, K k2) {
            int compare = map.get(k2).compareTo(map.get(k1));
            if (compare == 0) return 1;
            else return ascending*compare;
        }
        public Comparator<K> setParam(int ascending)
        {
            this.ascending = ascending;
            return this;
        }
    }.setParam(ascending);

    Map<K, V> sortedByValues = new TreeMap<K, V>(valueComparator);
    sortedByValues.putAll(map);
    return sortedByValues;
}

As an example:

Map<Integer,Double> recommWarrVals = new HashMap<Integer,Double>();
recommWarrVals = sortByValues(recommWarrVals, 1);  // Ascending order
recommWarrVals = sortByValues(recommWarrVals,-1);  // Descending order

In order to select an element by attribute having a specific characteristic you may create a new selector like in the following snippet using a regex pattern. The usage of regex is intended to make flexible the new selector as much as possible:

jQuery.extend(jQuery.expr[':'], {
    nameMatch: function (ele, idx, selector) {
        var rpStr = (selector[3] || '').replace(/^\/(.*)\/$/, '$1');
        return (new RegExp(rpStr)).test(ele.name);
    }
});


//
// use of selector
//
$('input:nameMatch(/^pages_title\\[\\d\\]$/)').each(function(idx, ele) {
  console.log(ele.outerHTML);
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>


<input type="text" value="2" name="pages_title[1]">
<input type="text" value="1" name="pages_title[2]">
<input type="text" value="1" name="pages_title[]">

Another solution can be based on:

• [name^=”value”]: selects elements that have the specified attribute with a value beginning exactly with a given string.

• .filter(): reduce the set of matched elements to those that match the selector or pass the function's test.

• a regex pattern

var selectedEle = $(':input[name^="pages_title"]').filter(function(idx, ele) {
    //
    // test if the name attribute matches the pattern.....
    //
    return  /^pages_title\[\d\]$/.test(ele.name);
});
selectedEle.each(function(idx, ele) {
    console.log(ele.outerHTML);
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>


<input type="text" value="2" name="pages_title[1]">
<input type="text" value="1" name="pages_title[2]">
<input type="text" value="1" name="pages_title[]">

You can safely delete the WSDL cache files. If you wish to prevent future caching, use:

ini_set("soap.wsdl_cache_enabled", 0);

or dynamically:

$client = new SoapClient('http://somewhere.com/?wsdl', array('cache_wsdl' => WSDL_CACHE_NONE) );

Usually you don't have to worry about calculating them as your assembler (or linker) will take of getting the calculations right. Let's say you have a small function:

func:
  slti $t0, $a0, 2
  beq $t0, $zero, cont
  ori $v0, $zero, 1
  jr $ra
cont:
  ...
  jal func
  ... 

When translating the above code into a binary stream of instructions the assembler (or linker if you first assembled into an object file) it will be determined where in memory the function will reside (let's ignore position independent code for now). Where in memory it will reside is usually specified in the ABI or given to you if you're using a simulator (like SPIM which loads the code at 0x400000 - note the link also contains a good explanation of the process).

Assuming we're talking about the SPIM case and our function is first in memory, the slti instruction will reside at 0x400000, the beq at 0x400004 and so on. Now we're almost there! For the beq instruction the branch target address is that of cont (0x400010) looking at a MIPS instruction reference we see that it is encoded as a 16-bit signed immediate relative to the next instruction (divided by 4 as all instructions must reside on a 4-byte aligned address anyway).

That is:

Current address of instruction + 4 = 0x400004 + 4 = 0x400008
Branch target = 0x400010
Difference = 0x400010 - 0x400008 = 0x8
To encode = Difference / 4 = 0x8 / 4 = 0x2 = 0b10

Encoding of beq $t0, $zero, cont

0001 00ss ssst tttt iiii iiii iiii iiii
---------------------------------------
0001 0001 0000 0000 0000 0000 0000 0010

As you can see you can branch to within -0x1fffc .. 0x20000 bytes. If for some reason, you need to jump further you can use a trampoline (an unconditional jump to the real target placed placed within the given limit).

Jump target addresses are, unlike branch target addresses, encoded using the absolute address (again divided by 4). Since the instruction encoding uses 6 bits for the opcode, this only leaves 26 bits for the address (effectively 28 given that the 2 last bits will be 0) therefore the 4 bits most significant bits of the PC register are used when forming the address (won't matter unless you intend to jump across 256 MB boundaries).

Returning to the above example the encoding for jal func is:

Destination address = absolute address of func = 0x400000
Divided by 4 = 0x400000 / 4 = 0x100000
Lower 26 bits = 0x100000 & 0x03ffffff = 0x100000 = 0b100000000000000000000

0000 11ii iiii iiii iiii iiii iiii iiii
---------------------------------------
0000 1100 0001 0000 0000 0000 0000 0000

You can quickly verify this, and play around with different instructions, using this online MIPS assembler i ran across (note it doesn't support all opcodes, for example slti, so I just changed that to slt here):

00400000: <func>    ; <input:0> func:
00400000: 0000002a  ; <input:1> slt $t0, $a0, 2
00400004: 11000002  ; <input:2> beq $t0, $zero, cont
00400008: 34020001  ; <input:3> ori $v0, $zero, 1
0040000c: 03e00008  ; <input:4> jr $ra
00400010: <cont>    ; <input:5> cont:
00400010: 0c100000  ; <input:7> jal func

For Linux:

git add * 
git commit -a --message "Initial Push All"
git push -u origin --all

In my CASE I was inserting more character than defined in table.

In My Table column was defined with nvarchar(3) and I was passing more than 3 characters and same ERROR message was coming .

Its not answer but may be in some case problem is similar

You need to create a new Font

mainForm.lblName.Font = new Font("Arial", mainForm.lblName.Font.Size);

application because .js-Files aren't something a user wants to read but something that should get executed.

Try this command:

find / -name file.look

Yes, it's historical. Without it, it creates an old-style class.

If you use type() on an old-style object, you just get "instance". On a new-style object you get its class.

You can provide padding to an input like this:

HTML:

<input type=text id=firstname />

CSS:

input {
    width: 250px;
    padding: 5px;
}

however I would also add:

input {
    width: 250px;
    padding: 5px;
    -webkit-box-sizing: border-box; /* Safari/Chrome, other WebKit */
    -moz-box-sizing: border-box;    /* Firefox, other Gecko */
    box-sizing: border-box;         /* Opera/IE 8+ */
}

Box sizing makes the input width stay at 250px rather than increase to 260px due to the padding.

For reference.

How I would do this

git checkout master
git pull origin master
git merge test
git push origin master

If I have a local branch from a remote one, I don't feel comfortable with merging other branches than this one with the remote. Also I would not push my changes, until I'm happy with what I want to push and also I wouldn't push things at all, that are only for me and my local repository. In your description it seems, that test is only for you? So no reason to publish it.

git always tries to respect yours and others changes, and so will --rebase. I don't think I can explain it appropriately, so have a look at the Git book - Rebasing or git-ready: Intro into rebasing for a little description. It's a quite cool feature

[Update Sep 2016]: This answer was intended for docker compose file v1 (as shown by the sample compose file below). For v2, see the other answer by @Windsooon.

[Original answer]:

It is pretty clear in the documentation. depends_on decides the dependency and the order of container creation and links not only does these, but also

Containers for the linked service will be reachable at a hostname identical to the alias, or the service name if no alias was specified.

For example, assuming the following docker-compose.yml file:

web:
  image: example/my_web_app:latest
  links:
    - db
    - cache

db:
  image: postgres:latest

cache:
  image: redis:latest

With links, code inside web will be able to access the database using db:5432, assuming port 5432 is exposed in the db image. If depends_on were used, this wouldn't be possible, but the startup order of the containers would be correct.

What about this:

var txt="";
var nyc = {
    fullName: "New York City",
    mayor: "Michael Bloomberg",
    population: 8000000,
    boroughs: 5
};

for (var x in nyc){
    txt += nyc[x];
}

select datename(DAY,GETDATE()) +'-'+ datename(MONTH,GETDATE()) +'- '+ 
       datename(YEAR,GETDATE()) as 'yourcolumnname'

This should be enough to get you started.

class Program
{        
    static void Main(String[] args)
    {
        const int bufferSize = 1024;

        var sb = new StringBuilder();
        var buffer = new Char[bufferSize];
        var length = 0L;
        var totalRead = 0L;
        var count = bufferSize; 

        using (var sr = new StreamReader(@"C:\Temp\file.txt"))
        {
            length = sr.BaseStream.Length;               
            while (count > 0)
            {                    
                count = sr.Read(buffer, 0, bufferSize);
                sb.Append(buffer, 0, count);
                totalRead += count;
            }                
        }

        Console.ReadKey();
    }
}

Building on jävi's answer, this can be done without IDs or additional button attributes like this:

http://jsfiddle.net/isherwood/E5Ly5/

<button class="popper" data-toggle="popover">Pop me</button>
<div class="popper-content hide">My first popover content goes here.</div>

<button class="popper" data-toggle="popover">Pop me</button>
<div class="popper-content hide">My second popover content goes here.</div>

<button class="popper" data-toggle="popover">Pop me</button>
<div class="popper-content hide">My third popover content goes here.</div>

$('.popper').popover({
    container: 'body',
    html: true,
    content: function () {
        return $(this).next('.popper-content').html();
    }
});

This happens because your click handler fires before the value of the radio button changes. You need to listen to the change event instead:

<input 
  type="radio" 
  name="optionsRadios" 
  id="optionsRadios2" 
  value=""
  v-model="srStatus" 
  v-on:change="foo"> //here

Also, make sure you really want to call foo() on ready... seems like maybe you don't actually want to do that.

ready:function(){
    foo();
},

You may find it useful to include index inside key:

d = {'a': 1, 'b': 2}
d = {(i, k): v for i, (k, v) in enumerate(d.items())}

Output:

{(0, 'a'): True, (1, 'b'): False}

You can just do it like this:

#content {
    position: relative;
}
#content img {
    position: absolute;
    top: 0px;
    right: 0px;
}

<div id="content">
    <img src="images/ribbon.png" class="ribbon"/>
    <div>some text...</div>
</div>

Your code works also for me. However, another workaround can be to get the plot's axis and then change only the y-values:

x1,x2,y1,y2 = plt.axis()
plt.axis((x1,x2,25,250))

Strings and other concrete objects are typically expressed as immutable objects to improve readability and runtime efficiency. Security is another, a process can't change your string and inject code into the string

I wrote a small plugin to make it easier to bind the "on enter key pressed" a event:

$.fn.enterKey = function (fnc) {
    return this.each(function () {
        $(this).keypress(function (ev) {
            var keycode = (ev.keyCode ? ev.keyCode : ev.which);
            if (keycode == '13') {
                fnc.call(this, ev);
            }
        })
    })
}

Usage:

$("#input").enterKey(function () {
    alert('Enter!');
})

There's an array that gives you the exit status of each command in a pipe.

$ cat x| sed 's///'
cat: x: No such file or directory
$ echo $?
0
$ cat x| sed 's///'
cat: x: No such file or directory
$ echo ${PIPESTATUS[*]}
1 0
$ touch x
$ cat x| sed 's'
sed: 1: "s": substitute pattern can not be delimited by newline or backslash
$ echo ${PIPESTATUS[*]}
0 1

The splice() method adds/removes items to/from an array, and returns the removed item(s).

Note: This method changes the original array. /w3schools/

Array.prototype.move = function(from,to){
  this.splice(to,0,this.splice(from,1)[0]);
  return this;
};

var arr = [ 'a', 'b', 'c', 'd', 'e'];
arr.move(3,1);//["a", "d", "b", "c", "e"]


var arr = [ 'a', 'b', 'c', 'd', 'e'];
arr.move(0,2);//["b", "c", "a", "d", "e"]

as the function is chainable this works too:

alert(arr.move(0,2).join(','));

demo here

In the future (perhaps) you will be able to use :nth-child(an+b of s)

Actually, browser support for the “of” filter is very limited. Only Safari seems to support the syntax.

https://css-tricks.com/almanac/selectors/n/nth-child/

A -exec command must be terminated with a ; (so you usually need to type \; or ';' to avoid interpretion by the shell) or a +. The difference is that with ;, the command is called once per file, with +, it is called just as few times as possible (usually once, but there is a maximum length for a command line, so it might be split up) with all filenames. See this example:

$ cat /tmp/echoargs
#!/bin/sh
echo $1 - $2 - $3
$ find /tmp/foo -exec /tmp/echoargs {} \;
/tmp/foo - -
/tmp/foo/one - -
/tmp/foo/two - -
$ find /tmp/foo -exec /tmp/echoargs {} +
/tmp/foo - /tmp/foo/one - /tmp/foo/two

Your command has two errors:

First, you use {};, but the ; must be a parameter of its own.

Second, the command ends at the &&. You specified “run find, and if that was successful, remove the file named {};.“. If you want to use shell stuff in the -exec command, you need to explicitly run it in a shell, such as -exec sh -c 'ffmpeg ... && rm'.

However you should not add the {} inside the bash command, it will produce problems when there are special characters. Instead, you can pass additional parameters to the shell after -c command_string (see man sh):

$ ls
$(echo damn.)
$ find * -exec sh -c 'echo "{}"' \;
damn.
$ find * -exec sh -c 'echo "$1"' - {} \;
$(echo damn.)

You see the $ thing is evaluated by the shell in the first example. Imagine there was a file called $(rm -rf /) :-)

(Side note: The - is not needed, but the first variable after the command is assigned to the variable $0, which is a special variable normally containing the name of the program being run and setting that to a parameter is a little unclean, though it won't cause any harm here probably, so we set that to just - and start with $1.)

So your command could be something like

find -exec bash -c 'ffmpeg -i "$1" -sameq "$1".mp3 && rm "$1".mp3' - {} \;

But there is a better way. find supports and and or, so you may do stuff like find -name foo -or -name bar. But that also works with -exec, which evaluates to true if the command exits successfully, and to false if not. See this example:

$ ls
false  true
$ find * -exec {} \; -and -print
true

It only runs the print if the command was successfully, which it did for true but not for false.

So you can use two exec statements chained with an -and, and it will only execute the latter if the former was run successfully.

You did not really ask an actual question, but since this is a general use case I'm using quite often here's what I do. You may try this yourself and see if the error persists.

My assumption on your use case:

You have an existing directory containing files and directories and now want to convert it into a Git repository that is cloned from some place else without changing any data in your current directory.

There are really two ways.

Clone repo - mv .git - git reset --hard

This method is what you did - to clone the existing repository into an empty directory, then move the .git directory into the destination directory. To work without problems, this generally requires you then to run

git reset --hard

However, that would change the state of files in your current directory. You can try this on a full copy/rsync of your directory and study what changes. At least afterwards you should no longer see discrepancies between git log and status.

Init new repository - point to origin

The second is less disturbing: cd into your destination, and start a new repository with

git init

Then you tell that new repository, that it has an ancestor some place else:

git remote add origin original_git_repo_path

Then safely

git fetch origin master

to copy over the data without changing your local files. Everything should be fine now.

I always recommend the second way for being less error-prone.

In Scala and Spark 2+, try this (assuming your column name is "s"): df.select('s).as[String].collect

For Xamarin.iOS inside AppDelegate's FinishedLaunching() put code like this :-

UILabel.Appearance.Font= UIFont.FromName("Lato-Regular", 14);

set font for the entire application and Add 'UIAppFonts' key on Info.plist , the path should be the path where your font file .ttf is situated .For me it was inside 'fonts' folder in my project.

<key>UIAppFonts</key>
    <array>
        <string>fonts/Lato-Regular.ttf</string>
    </array>

It's worth noting that console.log in IE8 isn't a true Javascript function. It doesn't support the apply or call methods.

You can use the Build Helper Plugin, e.g:

<project>
  ...
  <build>
    <plugins>
      <plugin>
        <groupId>org.codehaus.mojo</groupId>
        <artifactId>build-helper-maven-plugin</artifactId>
        <version>3.2.0</version>
        <executions>
          <execution>
            <id>add-source</id>
            <phase>generate-sources</phase>
            <goals>
              <goal>add-source</goal>
            </goals>
            <configuration>
              <sources>
                <source>some directory</source>
                ...
              </sources>
            </configuration>
          </execution>
        </executions>
      </plugin>
    </plugins>
  </build>
</project>

You can do this with the hex codec. ie:

>>> s='000000000000484240FA063DE5D0B744ADBED63A81FAEA390000C8428640A43D5005BD44'
>>> s.decode('hex')
'\x00\x00\x00\x00\x00\x00HB@\xfa\x06=\xe5\xd0\xb7D\xad\xbe\xd6:\x81\xfa\xea9\x00\x00\xc8B\x86@\xa4=P\x05\xbdD'

If you want something like the python3 print function but to a string:

def sprint(*args, **kwargs):
    sio = io.StringIO()
    print(*args, **kwargs, file=sio)
    return sio.getvalue()

>>> x = sprint('abc', 10, ['one', 'two'], {'a': 1, 'b': 2}, {1, 2, 3})
>>> x
"abc 10 ['one', 'two'] {'a': 1, 'b': 2} {1, 2, 3}\n"

or without the '\n' at the end:

def sprint(*args, end='', **kwargs):
    sio = io.StringIO()
    print(*args, **kwargs, end=end, file=sio)
    return sio.getvalue()

>>> x = sprint('abc', 10, ['one', 'two'], {'a': 1, 'b': 2}, {1, 2, 3})
>>> x
"abc 10 ['one', 'two'] {'a': 1, 'b': 2} {1, 2, 3}"

I also had the same problem, as a quick workaround, I used blend to determine how much padding was being added. In my case it was 12, so I used a negative margin to get rid of it. Now everything can now be centered properly

This can also depend on the way you are invoking the SP from your C# code. If the SP returns some table type value then invoke the SP with ExecuteStoreQuery, and if the SP doesn't returns any value invoke the SP with ExecuteStoreCommand

Similar issue:

I gave passphrase when Git-cloned using SSH URL for git.
So this error now shows up, each time I opened VS Code on Windows 10

Below fixed the issue:

1 . Run the below command in CMD

setx SSH_ASKPASS "C:\Program Files\Git\mingw64\libexec\git-core\git-gui--askpass"
setx DISPLAY needs-to-be-defined

2 . Exit CMD & VS Code

3 . Reopen VS Code

4 . VS Code now shows a popup dialog where we can enter passpharse

Above commands are for Windows OS, similar instructions will work for Linux/MAC.

The algorithm has been designed to support arbitrary input length. I.e you can compute hashes of big files like ISO of a DVD...

If there is a limitation for the input it could come from the environment where the hash function is used. Let's say you want to compute a file and the environment has a MAX_FILE limit.

But the output string will be always the same: 32 hex chars (128 bits)!

The simplest approach is to use a multitouch JavaScript library like Hammer.js. Then you can write code like:

canvas
    .hammer({prevent_default: true})
    .bind('doubletap', function(e) { // And double click
        // Zoom-in
    })
    .bind('dragstart', function(e) { // And mousedown
        // Get ready to drag
    })
    .bind('drag', function(e) { // And mousemove when mousedown
        // Pan the image
    })
    .bind('dragend', function(e) { // And mouseup
        // Finish the drag
    });

And you can keep going. It supports tap, double tap, swipe, hold, transform (i.e., pinch) and drag. The touch events also fire when equivalent mouse actions happen, so you don't need to write two sets of event handlers. Oh, and you need the jQuery plugin if you want to be able to write in the jQueryish way as I did.

If you use PHP5 (And you should, given that PHP4 has been deprecated), you should use PDO, since this is slowly becoming the new standard. One (very) important benefit of PDO, is that it supports bound parameters, which makes for much more secure code.

You would connect through PDO, like this:

try {
  $db = new PDO('mysql:dbname=databasename;host=127.0.0.1', 'username', 'password');
} catch (PDOException $ex) {
  echo 'Connection failed: ' . $ex->getMessage();
}

(Of course replace databasename, username and password above)

You can then query the database like this:

$result = $db->query("select * from tablename");
foreach ($result as $row) {
  echo $row['foo'] . "\n";
}

Or, if you have variables:

$stmt = $db->prepare("select * from tablename where id = :id");
$stmt->execute(array(':id' => 42));
$row = $stmt->fetch();

If you need multiple connections open at once, you can simply create multiple instances of PDO:

try {
  $db1 = new PDO('mysql:dbname=databas1;host=127.0.0.1', 'username', 'password');
  $db2 = new PDO('mysql:dbname=databas2;host=127.0.0.1', 'username', 'password');
} catch (PDOException $ex) {
  echo 'Connection failed: ' . $ex->getMessage();
}

You should look for the error in the file error_log in the log directory. Maybe there are differences between your local and server configuration (db user/password etc.etc.)

usually the log file is in

/var/log/apache2/error.log

or

/var/log/httpd/error.log

People are confusing about what closure is. Closure is not the inner function. the meaning of closure is act of closing. So inner function is closing over a nonlocal variable which is called free variable.

def counter_in(initial_value=0):
    # initial_value is the free variable
    def inc(increment=1):
        nonlocal initial_value
        initial_value += increment
        return print(initial_value)
    return inc

when you call counter_in() this will return inc function which has a free variable initial_value. So we created a CLOSURE. people call inc as closure function and I think this is confusing people, people think "ok inner functions are closures". in reality inc is not a closure, since it is part of the closure, to make life easy, they call it closure function.

  myClosingOverFunc=counter_in(2)

this returns inc function which is closing over the free variable initial_value. when you invoke myClosingOverFunc

 myClosingOverFunc() 

it will print 2.

when python sees that a closure sytem exists, it creates a new obj called CELL. this will store only the name of the free variable which is initial_value in this case. This Cell obj will point to another object which stores the value of the initial_value.

in our example, initial_value in outer function and inner function will point to this cell object, and this cell object will be point to the value of the initial_value.

  variable initial_value =====>> CELL ==========>> value of initial_value

So when you call counter_in its scope is gone, but it does not matter. because variable initial_value is directly referencing the CELL Obj. and it indirectly references the value of initial_value. That is why even though scope of outer function is gone, inner function will still have access to the free variable

let's say I want to write a function, which takes in a function as an arg and returns how many times this function is called.

def counter(fn):
    # since cnt is a free var, python will create a cell and this cell will point to the value of cnt
    # every time cnt changes, cell will be pointing to the new value
    cnt = 0

    def inner(*args, **kwargs):
        # we cannot modidy cnt with out nonlocal
        nonlocal cnt
        cnt += 1
        print(f'{fn.__name__} has been called {cnt} times')
        # we are calling fn indirectly via the closue inner
        return fn(*args, **kwargs)
    return inner
      

in this example cnt is our free variable and inner + cnt create CLOSURE. when python sees this it will create a CELL Obj and cnt will always directly reference this cell obj and CELL will reference the another obj in the memory which stores the value of cnt. initially cnt=0.

 cnt   ======>>>>  CELL  =============>  0

when you invoke the inner function wih passing a parameter counter(myFunc)() this will increase the cnt by 1. so our referencing schema will change as follow:

 cnt   ======>>>>  CELL  =============>  1  #first counter(myFunc)()
 cnt   ======>>>>  CELL  =============>  2  #second counter(myFunc)()
 cnt   ======>>>>  CELL  =============>  3  #third counter(myFunc)()

this is only one instance of closure. You can create multiple instances of closure with passing another function

counter(differentFunc)()

this will create a different CELL obj from the above. We just have created another closure instance.

 cnt  ======>>  difCELL  ========>  1  #first counter(differentFunc)()
 cnt  ======>>  difCELL  ========>  2  #secon counter(differentFunc)()
 cnt  ======>>  difCELL  ========>  3  #third counter(differentFunc)()


  

You can use selector option for dynamic single page applications:

jQuery(function($) {
    $(document).tooltip({
        selector: '[data-toggle="tooltip"]'
    });
});

if a selector is provided, tooltip objects will be delegated to the specified targets. In practice, this is used to enable dynamic HTML content to have tooltips added.

If you're into RegEx....

var newURL = testURL.match(new RegExp("[^?]+"))

I just wrote a simple module to deal with reading and updating the current url query params.

Example usage:

import UrlParams from './UrlParams'

UrlParams.remove('foo') //removes all occurences of foo=?
UrlParams.set('foo', 'bar') //set all occurences of foo equal to bar
UrlParams.add('foo', 'bar2') //add bar2 to foo result: foo=bar&foo=bar2
UrlParams.get('foo') //returns bar
UrlParams.get('foo', true) //returns [bar, bar2]

Here is my code named UrlParams.(js/ts):

class UrlParams {

    /**
     * Get params from current url
     * 
     * @returns URLSearchParams
     */
    static getParams(){
        let url = new URL(window.location.href)
        return new URLSearchParams(url.search.slice(1))
    }

    /**
     * Update current url with params
     * 
     * @param params URLSearchParams
     */
    static update(params){
        if(`${params}`){
            window.history.replaceState({}, '', `${location.pathname}?${params}`)
        } else {
            window.history.replaceState({}, '', `${location.pathname}`)
        }
    }

    /**
     * Remove key from url query
     * 
     * @param param string
     */
    static remove(param){
        let params = this.getParams()
        if(params.has(param)){
            params.delete(param)
            this.update(params)
        }
    }

    /**
     * Add key value pair to current url
     * 
     * @param key string
     * @param value string
     */
    static add(key, value){
        let params = this.getParams()
        params.append(key, value)
        this.update(params)
    }

    /**
     * Get value or values of key
     * 
     * @param param string
     * @param all string | string[]
     */
    static get(param, all=false){
        let params = this.getParams()
        if(all){
            return params.getAll(param)
        }
        return params.get(param)
    }

    /**
     * Set value of query param
     * 
     * @param key string
     * @param value string
     */
    static set(key, value){
        let params = this.getParams()
        params.set(key, value)
        this.update(params)
    }

}
export default UrlParams
export { UrlParams }

you can also try to parse the data and then check if you got object:

var testIfJson = JSON.parse(data);
if (typeOf testIfJson == "object")
{
//Json
}
else
{
//Not Json
}

Use File.ReadAllText(path_to_file) to read

Contributing to ferrix example,

class Battery():

    def __init__(self, battery_size = 60):
        self.battery_size = battery_size
    def get_range(self):
        if self.battery_size == 70:
            range = 240
        elif self.battery_size == 85:
        range = 270

        message = "This car can go approx " + str(range)
        message += "Fully charge"
        print(message)

My message will not execute, because none of my conditions are fulfill therefore receiving " UnboundLocalError: local variable 'range' referenced before assignment"

def get_range(self):
    if self.battery_size <= 70:
        range = 240
    elif self.battery_size >= 85:
        range = 270

All your exercise conditionals are separate and the else is only tied to the last if statement. Use else if to bind them all together in the way I believe you intend.

There are two cases in which this error is raised.

1. You didn't declare the variable which is used
2. You didn't create the instances of the class

Android Studio has been kind of a moving target, first being a developer preview and now being in beta. The path for the Test classes in the project has changed during time, but no matter what version of AS you are using, the path is declared in your .iml file. Currently, with version 0.8.3, you'll find the following inside the inner iml file:

      <sourceFolder url="file://$MODULE_DIR$/src/androidTest/res" type="java-test-resource" />
  <sourceFolder url="file://$MODULE_DIR$/src/androidTest/resources" type="java-test-resource" />
  <sourceFolder url="file://$MODULE_DIR$/src/androidTest/assets" type="java-test-resource" />
  <sourceFolder url="file://$MODULE_DIR$/src/androidTest/aidl" isTestSource="true" />
  <sourceFolder url="file://$MODULE_DIR$/src/androidTest/java" isTestSource="true" />
  <sourceFolder url="file://$MODULE_DIR$/src/androidTest/groovy" isTestSource="true" />
  <sourceFolder url="file://$MODULE_DIR$/src/androidTest/jni" isTestSource="true" />
  <sourceFolder url="file://$MODULE_DIR$/src/androidTest/rs" isTestSource="true" />

The .iml file is telling you where to place your test classes.

Because you can ask the server to prepend a prefix to the returned JSON object. E.g

function_prefix(json_object);

in order for the browser to eval "inline" the JSON string as an expression. This trick makes it possible for the server to "inject" javascript code directly in the Client browser and this with bypassing the "same origin" restrictions.

In other words, you can achieve cross-domain data exchange.

Normally, XMLHttpRequest doesn't permit cross-domain data-exchange directly (one needs to go through a server in the same domain) whereas:

<script src="some_other_domain/some_data.js&prefix=function_prefix>` one can access data from a domain different than from the origin.

Also worth noting: even though the server should be considered as "trusted" before attempting that sort of "trick", the side-effects of possible change in object format etc. can be contained. If a function_prefix (i.e. a proper js function) is used to receive the JSON object, the said function can perform checks before accepting/further processing the returned data.

As suggested by Adam Miller in the comments, I'll add another solution.

The MailMessage(String from, String to) constructor accepts a comma separated list of addresses. So if you happen to have already a comma (',') separated list, the usage is as simple as:

MailMessage Msg = new MailMessage(fromMail, addresses);

In this particular case, we can replace the ';' for ',' and still make use of the constructor.

MailMessage Msg = new MailMessage(fromMail, addresses.replace(";", ","));

Whether you prefer this or the accepted answer it's up to you. Arguably the loop makes the intent clearer, but this is shorter and not obscure. But should you already have a comma separated list, I think this is the way to go.

There are little difference in command of adding AND changing DNS-IPs:

To Add:

Syntax:
   netsh interface ipv4 add dnsserver "Network Interface Name" dns.server.ip index=1(for primary)2(for secondary)
Eg:
   netsh interface ipv4 add dnsserver "Ethernet" 8.8.8.8 index=1

• Here, to know "Network Interface Name", type command netsh interface show interface
• 8.8.8.8 is Google's recursive DNS server, use it, if your's not working

To Set/Change: (as OP asked this)

Syntax:
   netsh interface ipv4 set dnsservers "Network Interface Name" static dns.server.ip primary
Eg:
   netsh interface ipv4 set dnsservers "Wi-Fi" static 8.8.4.4 primary
   netsh interface ipv4 set dnsservers "Wi-Fi" dhcp

• Last parameter can be none:disable DNS, both:set for primary and secondary DNS both, primary: for primary DNS only. You can notice here we are not using index-parameter as we did in adding DNS.

• In the place of static you can type dhcp to make DNS setting automatic, but further parameter will not be required.

Note: Tested in windows 8,8.1 & 10.

You can create option dialog

Open Camera:

Intent cameraIntent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE);
                        cameraIntent.putExtra(MediaStore.EXTRA_OUTPUT,
                                MediaStore.Images.Media.EXTERNAL_CONTENT_URI.toString());
                        if (cameraIntent.resolveActivity(getActivity().getPackageManager()) != null) {
                            startActivityForResult(cameraIntent, CAMERA_IMAGE);
                        }

Open Gallery:

if (Build.VERSION.SDK_INT <= 19) {
            Intent i = new Intent();
            i.setType("image/*");
            i.setAction(Intent.ACTION_GET_CONTENT);
            i.addCategory(Intent.CATEGORY_OPENABLE);
            startActivityForResult(i, GALLARY_IMAGE);
        } else if (Build.VERSION.SDK_INT > 19) {
            Intent intent = new Intent(Intent.ACTION_PICK, android.provider.MediaStore.Images.Media.EXTERNAL_CONTENT_URI);
            startActivityForResult(intent, GALLARY_IMAGE);
        }

To get selection result

@Override
    public void onActivityResult(int requestCode, int resultCode, Intent data) {
        super.onActivityResult(requestCode, resultCode, data);
        if (resultCode == Activity.RESULT_OK) {
            if (requestCode == GALLARY_IMAGE) {
                Uri selectedImageUri = data.getData();
                String selectedImagePath = getRealPathFromURI(selectedImageUri);
            } else if (requestCode == CAMERA_IMAGE) {
                Bundle extras = data.getExtras();
                Bitmap bmp = (Bitmap) extras.get("data");
                SaveImage(bmp);
            }
        }
    }

 public String getRealPathFromURI(Uri uri) {
        if (uri == null) {
            return null;
        }
        String[] projection = {MediaStore.Images.Media.DATA};
        Cursor cursor = getActivity().getContentResolver().query(uri, projection, null, null, null);
        if (cursor != null) {
            int column_index = cursor
                    .getColumnIndexOrThrow(MediaStore.Images.Media.DATA);
            cursor.moveToFirst();
            return cursor.getString(column_index);
        }
        return uri.getPath();
    }

Method to save captured image

 private void SaveImage(final Bitmap finalBitmap) {
        Thread t = new Thread(new Runnable() {
            @Override
            public void run() {
                String root = Environment.getExternalStorageDirectory().toString();

                File myDir = new File(root + "/Captured Images/");
                if (!myDir.exists())
                    myDir.mkdirs();

                String fname = "/image-" + System.currentTimeMillis() + ".jpg";
                File file = new File(myDir, fname);
                try {
                    FileOutputStream out = new FileOutputStream(file);
                    finalBitmap.compress(Bitmap.CompressFormat.JPEG, 100, out);
                    out.flush();
                    out.close();
                    localImagePath = myDir + fname;
                } catch (Exception e) {
                    e.printStackTrace();
                }
            }


        });
        t.start();

    }

Can I see (...) the real SQL

If you want to see the SQL sent directly to the database (that is formatted similar to your example), you'll have to use some kind of jdbc driver proxy like P6Spy (or log4jdbc).

Alternatively you can enable logging of the following categories (using a log4j.properties file here):

log4j.logger.org.hibernate.SQL=DEBUG
log4j.logger.org.hibernate.type=TRACE

The first is equivalent to hibernate.show_sql=true, the second prints the bound parameters among other things.

Reference

• Hibernate 3.5 Core Documentation
  • 3.5. Logging
• Hibernate 4.1 Core Documentation
  • 4.1. Logging

Might be worthwhile using the CultureInfo to apply DateTime formatting throughout the website. Insteado f running around formatting whever you have to.

CultureInfo.CurrentUICulture.DateTimeFormat.SetAllDateTimePatterns( ...

or

CultureInfo.CurrentUICulture.DateTimeFormat.ShortDatePattern = "yyyy-MM-dd"; 

Code should go somewhere in your Global.asax file

protected void Application_Start(){ ...

This works for Swift 5:

self.navigationItem.backBarButtonItem?.title = ""

Please note it will be effective for the next pushed view controller not the current one on the display, that's why it's very confusing!

Also, check the storyboard and select the navigation item of the previous view controller then type something in the Back Button (Inspector).

See @Cesco's answer: npm init is really all you need

I was having the same issue - running npm install somePackage was not generating a node_modules dir.

I created a package.json file at the root, which contained a simple JSON obj:

{
    "name": "please-work"
}

On the next npm install the node_modules directory appeared.

Your Window is not implementing the necessary data binding notifications that the grid requires to use it as a data source, namely the INotifyPropertyChanged interface.

Your "Name2" string needs also to be a property and not a public variable, as data binding is for use with properties.

Implementing the necessary interfaces for using an object as a data source can be found here.

I had also found this error but I have solved this problem by easy steps. If you want to solve this problem follow these steps:

Step 1: First start code block

Step 2: Go to menu bar and click on the Setting menu

Step 3: After that click on the Compiler option

Step 4: Now, a pop up window will be opened. In this window, select "GNU GCC COMPILER"

Step 5: Now go to the toolchain executables tab and select the compiler installation directory like (C:\Program Files (x86)\CodeBlocks\MinGW\bin)

Step 6: Click on the Ok.

Now you can remove this error by follow these steps. Sometimes you don't need to select bin folder. You need to select only (C:\Program Files (x86)\CodeBlocks\MinGW) this path but some system doesn't work this path. That's why you have to select path from C:/ to bin folder.

Thank you.

You should be able to adjust the width using the .modal-dialog class selector (in conjunction with media queries or whatever strategy you're using for responsive design):

.modal-dialog {
    width: 400px;
}

I think that the body isn't correct for an application/x-www-form-urlencoded content type. You could try to use this:

var body = 'username=myusername&password=mypassword';

Hope it helps you, Thierry

• getParameter() returns http request parameters. Those passed from the client to the server. For example http://example.com/servlet?parameter=1. Can only return String

• getAttribute() is for server-side usage only - you fill the request with attributes that you can use within the same request. For example - you set an attribute in a servlet, and read it from a JSP. Can be used for any object, not just string.

For reset all field in one form you can use event.target.reset()

const app = new Vue({_x000D_
    el: '#app',    _x000D_
    data(){_x000D_
 return{        _x000D_
            name : null,_x000D_
     lastname : null,_x000D_
     address : null_x000D_
 }_x000D_
    },_x000D_
    methods: {_x000D_
        submitForm : function(event){_x000D_
            event.preventDefault(),_x000D_
            //process...             _x000D_
            event.target.reset()_x000D_
        }_x000D_
    }_x000D_
_x000D_
});

form input[type=text]{border-radius:5px; padding:6px; border:1px solid #ddd}_x000D_
form input[type=submit]{border-radius:5px; padding:8px; background:#060; color:#fff; cursor:pointer; border:none}

<script src="https://cdnjs.cloudflare.com/ajax/libs/vue/2.5.6/vue.js"></script>_x000D_
<div id="app">_x000D_
<form id="todo-field" v-on:submit="submitForm">_x000D_
        <input type="text" v-model="name"><br><br>_x000D_
        <input type="text" v-model="lastname"><br><br>_x000D_
        <input type="text" v-model="address"><br><br>_x000D_
        <input type="submit" value="Send"><br>_x000D_
    </form>_x000D_
</div>

Add this code to manifest:

<application android:supportsRtl="true">

and then write this code on Oncreate:

getWindow().getDecorView().setLayoutDirection(View.LAYOUT_DIRECTION_RTL);

It works for me. ;)

Use Python's json module, or simplejson if you don't have python 2.6 or higher.

I previously came up with a different workaround that doesn't use stored procedures, but instead uses a parameter table and some connection_id() magic.

EDIT (Copied up from comments)

create a table that contains a column called connection_id (make it a bigint). Place columns in that table for parameters for the view. Put a primary key on the connection_id. replace into the parameter table and use CONNECTION_ID() to populate the connection_id value. In the view use a cross join to the parameter table and put WHERE param_table.connection_id = CONNECTION_ID(). This will cross join with only one row from the parameter table which is what you want. You can then use the other columns in the where clause for example where orders.order_id = param_table.order_id.

If you only want to skip CSRF protection for one or more controller actions (instead of the entire controller), try this

skip_before_action :verify_authenticity_token, only [:webhook, :index, :create]

Where [:webhook, :index, :create] will skip the check for those 3 actions, but you can change to whichever you want to skip

Dependency Injection is passing dependency to other objects or framework( dependency injector).

Dependency injection makes testing easier. The injection can be done through constructor.

SomeClass() has its constructor as following:

public SomeClass() {
    myObject = Factory.getObject();
}

Problem: If myObject involves complex tasks such as disk access or network access, it is hard to do unit test on SomeClass(). Programmers have to mock myObject and might intercept the factory call.

Alternative solution:

• Passing myObject in as an argument to the constructor

public SomeClass (MyClass myObject) {
    this.myObject = myObject;
}

myObject can be passed directly which makes testing easier.

• One common alternative is defining a do-nothing constructor. Dependency injection can be done through setters. (h/t @MikeVella).
• Martin Fowler documents a third alternative (h/t @MarcDix), where classes explicitly implement an interface for the dependencies programmers wish injected.

It is harder to isolate components in unit testing without dependency injection.

In 2013, when I wrote this answer, this was a major theme on the Google Testing Blog. It remains the biggest advantage to me, as programmers not always need the extra flexibility in their run-time design (for instance, for service locator or similar patterns). Programmers often need to isolate the classes during testing.

As you say, local variables and references are stored on the stack. When a method returns, the stack pointer is simply moved back to where it was before the method started, that is, all local data is "removed from the stack". Therefore, there is no garbage collection needed on the stack, that only happens in the heap.

To answer your specific questions:

• See this question on how to increase the stack size.
• You can limit the stack growth by:
  • grouping many local variables in an object: that object will be stored in the heap and only the reference is stored on the stack
  • limit the number of nested function calls (typically by not using recursion)
• For windows, the default stack size is 320k for 32bit and 1024k for 64bit, see this link.

Note: At the time I answered this question in 2010, there was no way to deserialize without some sort of type, this allowed you to deserialize without having go define the actual class and allowed an anonymous class to be used to do the deserialization.

You need to have some sort of type to deserialize to. You could do something along the lines of:

var product = new { Name = "", Price = 0 };
dynamic jsonResponse = JsonConvert.Deserialize(json, product.GetType());

My answer is based on a solution for .NET 4.0's build in JSON serializer. Link to deserialize to anonymous types is here:

http://blogs.msdn.com/b/alexghi/archive/2008/12/22/using-anonymous-types-to-deserialize-json-data.aspx

Well just a small change 'cause the above solution outputs

"I want anapple"

instead of

"I want an apple"

To get the output as

"I want an apple"

use the following modified code

var output = a.substr(0, position) + " " + b + a.substr(position);

You should map your virtual network drive in Windows.

1. Open command prompt in Windows (VirtualBox)
2. Execute: net use x: \\vboxsvr\<your_shared_folder_name>
3. You should see new drive X: in My Computer

In your case execute net use x: \\vboxsvr\win7

The best, non-VBA, way to do this is using the TEXT formula. It takes a string as an argument and converts it to a value.

For example, =TEXT ("0.4*A1",'##') will return the value of 0.4 * the value that's in cell A1 of that worksheet.

You can do it using jQuery. Example:

<script src="https://code.jquery.com/jquery-1.11.2.min.js"></script>

<script>
    $.ajax({
        url : "next.php",
        type: "POST",
        data : "name=Denniss",
        success: function(data)
        {
            //data - response from server
            $('#response_div').html(data);
        }
    });
</script>

you could try

if (isValid) {
    document.getElementById("endTimeLabel").style.display = "none";
}else {
    document.getElementById("endTimeLabel").style.display = "block";
}

alone those lines

Instead of using a bat file, you can simply create a Scheduled Task. Most of the time you define just one action. In this case, create two actions with the NET command. The first one to stop the service, the second one to start the service. Give them a STOP and START argument, followed by the service name.

In this example we restart the Printer Spooler service.

NET STOP "Print Spooler" 
NET START "Print Spooler"

Note: unfortunately NET RESTART <service name> does not exist.

It is better to save files into a sub-directory of user.home than wherever the app. might reside.

Sun went to considerable effort to ensure that applets and apps. launched using Java Web Start cannot determine the apps. real path. This change broke many apps. I would not be surprised if the changes are extended to other apps.

I had a similar issue. Renato's tip worked for me. I used a older version of java class files (under WEB-INF/classes folder) and the problem disappeared. So, it should have been the compiler version mismatch.

You can get your result by simply use substr():

Syntax substr(string,start,length)

Example

<?php
$myStr = "HelloWordl";
echo substr($myStr,0,5);
?>

Output :

 Hello

If you don't use the STL, then the code looks a lot bit like C.

#include <cstdlib>
#include <new>

template< class T >
void append_to_array( T *&arr, size_t &n, T const &obj ) {
    T *tmp = static_cast<T*>( std::realloc( arr, sizeof(T) * (n+1) ) );
    if ( tmp == NULL ) throw std::bad_alloc( __FUNCTION__ );
       // assign things now that there is no exception
    arr = tmp;
    new( &arr[ n ] ) T( obj ); // placement new
    ++ n;
}

T can be any POD type, including pointers.

Note that arr must be allocated by malloc, not new[].

You can check with String == null

This works for me

    String foo = null;
    if(foo == null){
        System.out.println("String is null");
    }

Simplest way. Just check almost 2 words.

/^[^\s]+( [^\s]+)+$/

Valid names

• John Doe
• pedro alberto ch
• Ar. Gen
• Mathias d'Arras
• Martin Luther King, Jr.

No valid names

• John
• ???

someone here may find it useful. hhb_curl_exec2 works pretty much like curl_exec, but arg3 is an array which will be populated with the returned http headers (numeric index), and arg4 is an array which will be populated with the returned cookies ($cookies["expires"]=>"Fri, 06-May-2016 05:58:51 GMT"), and arg5 will be populated with... info about the raw request made by curl.

the downside is that it requires CURLOPT_RETURNTRANSFER to be on, else it error out, and that it will overwrite CURLOPT_STDERR and CURLOPT_VERBOSE, if you were already using them for something else.. (i might fix this later)

example of how to use it:

<?php
header("content-type: text/plain;charset=utf8");
$ch=curl_init();
$headers=array();
$cookies=array();
$debuginfo="";
$body="";
curl_setopt($ch,CURLOPT_SSL_VERIFYPEER,false);
curl_setopt($ch,CURLOPT_RETURNTRANSFER,true);
$body=hhb_curl_exec2($ch,'https://www.youtube.com/',$headers,$cookies,$debuginfo);
var_dump('$cookies:',$cookies,'$headers:',$headers,'$debuginfo:',$debuginfo,'$body:',$body);

and the function itself..

function hhb_curl_exec2($ch, $url, &$returnHeaders = array(), &$returnCookies = array(), &$verboseDebugInfo = "")
{
    $returnHeaders    = array();
    $returnCookies    = array();
    $verboseDebugInfo = "";
    if (!is_resource($ch) || get_resource_type($ch) !== 'curl') {
        throw new InvalidArgumentException('$ch must be a curl handle!');
    }
    if (!is_string($url)) {
        throw new InvalidArgumentException('$url must be a string!');
    }
    $verbosefileh = tmpfile();
    $verbosefile  = stream_get_meta_data($verbosefileh);
    $verbosefile  = $verbosefile['uri'];
    curl_setopt($ch, CURLOPT_VERBOSE, 1);
    curl_setopt($ch, CURLOPT_STDERR, $verbosefileh);
    curl_setopt($ch, CURLOPT_HEADER, 1);
    $html             = hhb_curl_exec($ch, $url);
    $verboseDebugInfo = file_get_contents($verbosefile);
    curl_setopt($ch, CURLOPT_STDERR, NULL);
    fclose($verbosefileh);
    unset($verbosefile, $verbosefileh);
    $headers       = array();
    $crlf          = "\x0d\x0a";
    $thepos        = strpos($html, $crlf . $crlf, 0);
    $headersString = substr($html, 0, $thepos);
    $headerArr     = explode($crlf, $headersString);
    $returnHeaders = $headerArr;
    unset($headersString, $headerArr);
    $htmlBody = substr($html, $thepos + 4); //should work on utf8/ascii headers... utf32? not so sure..
    unset($html);
    //I REALLY HOPE THERE EXIST A BETTER WAY TO GET COOKIES.. good grief this looks ugly..
    //at least it's tested and seems to work perfectly...
    $grabCookieName = function($str)
    {
        $ret = "";
        $i   = 0;
        for ($i = 0; $i < strlen($str); ++$i) {
            if ($str[$i] === ' ') {
                continue;
            }
            if ($str[$i] === '=') {
                break;
            }
            $ret .= $str[$i];
        }
        return urldecode($ret);
    };
    foreach ($returnHeaders as $header) {
        //Set-Cookie: crlfcoookielol=crlf+is%0D%0A+and+newline+is+%0D%0A+and+semicolon+is%3B+and+not+sure+what+else
        /*Set-Cookie:ci_spill=a%3A4%3A%7Bs%3A10%3A%22session_id%22%3Bs%3A32%3A%22305d3d67b8016ca9661c3b032d4319df%22%3Bs%3A10%3A%22ip_address%22%3Bs%3A14%3A%2285.164.158.128%22%3Bs%3A10%3A%22user_agent%22%3Bs%3A109%3A%22Mozilla%2F5.0+%28Windows+NT+6.1%3B+WOW64%29+AppleWebKit%2F537.36+%28KHTML%2C+like+Gecko%29+Chrome%2F43.0.2357.132+Safari%2F537.36%22%3Bs%3A13%3A%22last_activity%22%3Bi%3A1436874639%3B%7Dcab1dd09f4eca466660e8a767856d013; expires=Tue, 14-Jul-2015 13:50:39 GMT; path=/
        Set-Cookie: sessionToken=abc123; Expires=Wed, 09 Jun 2021 10:18:14 GMT;
        //Cookie names cannot contain any of the following '=,; \t\r\n\013\014'
        //
        */
        if (stripos($header, "Set-Cookie:") !== 0) {
            continue;
            /**/
        }
        $header = trim(substr($header, strlen("Set-Cookie:")));
        while (strlen($header) > 0) {
            $cookiename                 = $grabCookieName($header);
            $returnCookies[$cookiename] = '';
            $header                     = substr($header, strlen($cookiename) + 1); //also remove the = 
            if (strlen($header) < 1) {
                break;
            }
            ;
            $thepos = strpos($header, ';');
            if ($thepos === false) { //last cookie in this Set-Cookie.
                $returnCookies[$cookiename] = urldecode($header);
                break;
            }
            $returnCookies[$cookiename] = urldecode(substr($header, 0, $thepos));
            $header                     = trim(substr($header, $thepos + 1)); //also remove the ;
        }
    }
    unset($header, $cookiename, $thepos);
    return $htmlBody;
}

function hhb_curl_exec($ch, $url)
{
    static $hhb_curl_domainCache = "";
    //$hhb_curl_domainCache=&$this->hhb_curl_domainCache;
    //$ch=&$this->curlh;
    if (!is_resource($ch) || get_resource_type($ch) !== 'curl') {
        throw new InvalidArgumentException('$ch must be a curl handle!');
    }
    if (!is_string($url)) {
        throw new InvalidArgumentException('$url must be a string!');
    }

    $tmpvar = "";
    if (parse_url($url, PHP_URL_HOST) === null) {
        if (substr($url, 0, 1) !== '/') {
            $url = $hhb_curl_domainCache . '/' . $url;
        } else {
            $url = $hhb_curl_domainCache . $url;
        }
    }
    ;

    curl_setopt($ch, CURLOPT_URL, $url);
    $html = curl_exec($ch);
    if (curl_errno($ch)) {
        throw new Exception('Curl error (curl_errno=' . curl_errno($ch) . ') on url ' . var_export($url, true) . ': ' . curl_error($ch));
        // echo 'Curl error: ' . curl_error($ch);
    }
    if ($html === '' && 203 != ($tmpvar = curl_getinfo($ch, CURLINFO_HTTP_CODE)) /*203 is "success, but no output"..*/ ) {
        throw new Exception('Curl returned nothing for ' . var_export($url, true) . ' but HTTP_RESPONSE_CODE was ' . var_export($tmpvar, true));
    }
    ;
    //remember that curl (usually) auto-follows the "Location: " http redirects..
    $hhb_curl_domainCache = parse_url(curl_getinfo($ch, CURLINFO_EFFECTIVE_URL), PHP_URL_HOST);
    return $html;
}

As the other answers have already pointed out, https "URLs" are indeed encrypted. However, your DNS request/response when resolving the domain name is probably not, and of course, if you were using a browser, your URLs might be recorded too.

The separate XML solution never worked for me and other's recently ...

I usually follow this process and something helps:

1. Stop the server (Make sure its stopped via Task Manager, I killed javaw.exe as many times Eclipse doesn't really shut down properly)
2. Right click the Server->'Add and Remove'. Remove the project. Finish.
3. Right click the Server->'Add and Remove'. Add the project. Finish.
4. Restart see if works, if not continue
5. Double click the Server... See where its getting published (Server Path: which I think goes to a tmp# directory for me since I use an already-installed Tomcat instance I re-use, not sure if would be different if use Eclipse's internal/bundled tomcat server)
6. Right click on Server and 'Clean' ... Last one worked for me last time (so may want to try this first), Adding/Removing project worked for me other times. If doesn't work, continue ...
7. Delete all files from the Server Path and see if all files actually get built and published there (/WEB-INF/classes and other regular files in / webroot).
8. Restart Eclipse and/or machine (not sure I ever needed to get to this point)

If you write a function then once you leave it all names inside disappear.

The concept is called namespace and it's so good, it made it into the Zen of Python:

Namespaces are one honking great idea -- let's do more of those!

The namespace of IPython can likewise be reset with the magic command %reset -f. (The -f means "force"; in other words, "don't ask me if I really want to delete all the variables, just do it.")

request.getRequestDispatcher(“url”) means the dispatch is relative to the current HTTP request.Means this is for chaining two servlets with in the same web application Example

RequestDispatcher reqDispObj = request.getRequestDispatcher("/home.jsp");

getServletContext().getRequestDispatcher(“url”) means the dispatch is relative to the root of the ServletContext.Means this is for chaining two web applications with in the same server/two different servers

Example

RequestDispatcher reqDispObj = getServletContext().getRequestDispatcher("/ContextRoot/home.jsp");

For me the issue was about a comma not in the filename but as below: -

Response.ok(streamingOutput,MediaType.APPLICATION_OCTET_STREAM_TYPE).header("content-disposition", "attachment, filename=your_file_name").build();

I accidentally put a comma after attachment. Got it resolved by replacing comma with a semicolon.

I can see five options available:

1. Thread.Join

As with Mitch's answer. But this will block your UI thread, however you get a Timeout built in for you.

2. Use a WaitHandle

ManualResetEvent is a WaitHandle as jrista suggested.

One thing to note is if you want to wait for multiple threads: WaitHandle.WaitAll() won't work by default, as it needs an MTA thread. You can get around this by marking your Main() method with MTAThread - however this blocks your message pump and isn't recommended from what I've read.

3. Fire an event

See this page by Jon Skeet about events and multi-threading. It's possible that an event can become unsubcribed between the if and the EventName(this,EventArgs.Empty) - it's happened to me before.

(Hopefully these compile, I haven't tried)

public class Form1 : Form
{
    int _count;

    void ButtonClick(object sender, EventArgs e)
    {
        ThreadWorker worker = new ThreadWorker();
        worker.ThreadDone += HandleThreadDone;

        Thread thread1 = new Thread(worker.Run);
        thread1.Start();

        _count = 1;
    }

    void HandleThreadDone(object sender, EventArgs e)
    {
        // You should get the idea this is just an example
        if (_count == 1)
        {
            ThreadWorker worker = new ThreadWorker();
            worker.ThreadDone += HandleThreadDone;

            Thread thread2 = new Thread(worker.Run);
            thread2.Start();

            _count++;
        }
    }

    class ThreadWorker
    {
        public event EventHandler ThreadDone;

        public void Run()
        {
            // Do a task

            if (ThreadDone != null)
                ThreadDone(this, EventArgs.Empty);
        }
    }
}

4. Use a delegate

public class Form1 : Form
{
    int _count;

    void ButtonClick(object sender, EventArgs e)
    {
        ThreadWorker worker = new ThreadWorker();

        Thread thread1 = new Thread(worker.Run);
        thread1.Start(HandleThreadDone);

        _count = 1;
    }

    void HandleThreadDone()
    {
        // As before - just a simple example
        if (_count == 1)
        {
            ThreadWorker worker = new ThreadWorker();

            Thread thread2 = new Thread(worker.Run);
            thread2.Start(HandleThreadDone);

            _count++;
        }
    }

    class ThreadWorker
    {
        // Switch to your favourite Action<T> or Func<T>
        public void Run(object state)
        {
            // Do a task

            Action completeAction = (Action)state;
            completeAction.Invoke();
        }
    }
}

If you do use the _count method, it might be an idea (to be safe) to increment it using

Interlocked.Increment(ref _count)

I'd be interested to know the difference between using delegates and events for thread notification, the only difference I know are events are called synchronously.

5. Do it asynchronously instead

The answer to this question has a very clear description of your options with this method.

Delegate/Events on the wrong thread

The event/delegate way of doing things will mean your event handler method is on thread1/thread2 not the main UI thread, so you will need to switch back right at the top of the HandleThreadDone methods:

// Delegate example
if (InvokeRequired)
{
    Invoke(new Action(HandleThreadDone));
    return;
}

just to go File -> Sync Project with Gradle files then it solves problem.

To complement all of the above answers another convenient trick is to place the coloured prompt settings into a zsh function. There you may define local variables to alias longer commands, e.g. rc=$reset_color or define your own colour variables. Don't forget to place it into your .zshrc file and call the function you have defined:

# Coloured prompt
autoload -U colors && colors
function myprompt {
  local rc=$reset_color
  export PS1="%F{cyan}%n%{$rc%}@%F{green}%m%{$rc%}:%F{magenta}%~%{$rc%}%# "
}
myprompt

Here is the answer for those of you who need a Boostrap 3 solution.

In bootstrap 3 use 'shown.bs.tab' instead of 'shown' in the next line

// tab
$('#rowTab a:first').tab('show');

$('a[data-toggle="tab"]').on('shown.bs.tab', function (e) {
//show selected tab / active
 console.log ( $(e.target).attr('id') );
});

A simplified version, I had a similar issue to this when using the Google Maps JS SDK.

My solution was to extract the divand ViewChild into it's own child component which when used in the parent component was able to be hid/displayed using an *ngIf.

Before

HomePageComponent Template

<div *ngIf="showMap">
  <div #map id="map" class="map-container"></div>
</div>

HomePageComponent Component

@ViewChild('map') public mapElement: ElementRef; 

public ionViewDidLoad() {
    this.loadMap();
});

private loadMap() {

  const latLng = new google.maps.LatLng(-1234, 4567);
  const mapOptions = {
    center: latLng,
    zoom: 15,
    mapTypeId: google.maps.MapTypeId.ROADMAP,
  };
   this.map = new google.maps.Map(this.mapElement.nativeElement, mapOptions);
}

public toggleMap() {
  this.showMap = !this.showMap;
 }

After

MapComponent Template

 <div>
  <div #map id="map" class="map-container"></div>
</div>

MapComponent Component

@ViewChild('map') public mapElement: ElementRef; 

public ngOnInit() {
    this.loadMap();
});

private loadMap() {

  const latLng = new google.maps.LatLng(-1234, 4567);
  const mapOptions = {
    center: latLng,
    zoom: 15,
    mapTypeId: google.maps.MapTypeId.ROADMAP,
  };
   this.map = new google.maps.Map(this.mapElement.nativeElement, mapOptions);
}

HomePageComponent Template

<map *ngIf="showMap"></map>

HomePageComponent Component

public toggleMap() {
  this.showMap = !this.showMap;
 }