Posting it here as it might help others. In string it might be necessary to pass the quotes to jq. To do the following with jq:

.items[] | select(.name=="string")

in bash you could do

EMAILID=$1
projectID=$(cat file.json | jq -r '.resource[] | select(.username=='\"$EMAILID\"') | .id')

essentially escaping the quotes and passing it on to jq

In my case, I was using the Semantic UI React "Card" view. Once I added a key to each card I constructed, the warning went away, for example:

return (
        <Card fluid key={'message-results-card'}>
          ...
        </Card>
)

I was facing the same issue. After researching too much on Google and StackOverflow. I found a solution very simple

First, you need to set environment like this

MAIL_DRIVER=smtp
MAIL_HOST=smtp.gmail.com
MAIL_PORT=587
[email protected]
MAIL_PASSWORD=example44
MAIL_ENCRYPTION=tls
[email protected]

you have to change your Gmail address and password

Now you have to on less secure apps by following this link https://myaccount.google.com/lesssecureapps

For me Fake Sendmail works.

What to do:

1) Edit C:\wamp\sendmail\sendmail.ini:

smtp_server=smtp.gmail.com
smtp_port=465
[email protected]
auth_password=your_password

2) Edit php.ini and set sendmail_path

sendmail_path = "C:\wamp\sendmail\sendmail.exe -t"

That's it. Now you can test a mail.

I think you are not configured properly,

if you are using XAMPP then you can easily send mail from localhost.

for example you can configure C:\xampp\php\php.ini and c:\xampp\sendmail\sendmail.ini for gmail to send mail.

in C:\xampp\php\php.ini find extension=php_openssl.dll and remove the semicolon from the beginning of that line to make SSL working for gmail for localhost.

in php.ini file find [mail function] and change

SMTP=smtp.gmail.com
smtp_port=587
sendmail_from = [email protected]
sendmail_path = "C:\xampp\sendmail\sendmail.exe -t"

(use the above send mail path only and it will work)

Now Open C:\xampp\sendmail\sendmail.ini. Replace all the existing code in sendmail.ini with following code

[sendmail]

smtp_server=smtp.gmail.com
smtp_port=587
error_logfile=error.log
debug_logfile=debug.log
[email protected]
auth_password=my-gmail-password
[email protected]

Now you have done!! create php file with mail function and send mail from localhost.

Update

First, make sure you PHP installation has SSL support (look for an "openssl" section in the output from phpinfo()).

You can set the following settings in your PHP.ini:

ini_set("SMTP","ssl://smtp.gmail.com");
ini_set("smtp_port","465");

You have configured the auth.php and used members table for authentication but there is no user_email field in the members table so, Laravel says

SQLSTATE[42S22]: Column not found: 1054 Unknown column 'user_email' in 'where clause' (SQL: select * from members where user_email = ? limit 1) (Bindings: array ( 0 => '[email protected]', ))

Because, it tries to match the user_email in the members table and it's not there. According to your auth configuration, laravel is using members table for authentication not users table.

I guess problem is in width attributes in table and td remove 'px' for example

<table border="0" cellpadding="0" cellspacing="0" width="580px" style="background-color: #0290ba;">

Should be

<table border="0" cellpadding="0" cellspacing="0" width="580" style="background-color: #0290ba;">

var nameList = [_x000D_
{name:'x', age:20, email:'[email protected]'},_x000D_
{name:'y', age:60, email:'[email protected]'},_x000D_
{name:'Joe', age:22, email:'[email protected]'},_x000D_
{name:'Abc', age:40, email:'[email protected]'}_x000D_
];_x000D_
_x000D_
var filteredValue = nameList.filter(function (item) {_x000D_
      return item.name == "Joe" && item.age < 30;_x000D_
});_x000D_
_x000D_
//To See Output Result as Array_x000D_
console.log(JSON.stringify(filteredValue));

You can simply use javascript :)

Foreign Key Constraint Names Have to be Unique Within a Database

Both @Dorvalla’s answer and this blog post mentioned above pointed me into the right direction to fix the problem for myself; quoting from the latter:

If the table you're trying to create includes a foreign key constraint, and you've provided your own name for that constraint, remember that it must be unique within the database.

I wasn’t aware of that. I have changed my foreign key constraint names according to the following schema which appears to be used by Ruby on Rails applications, too:

<TABLE_NAME>_<FOREIGN_KEY_COLUMN_NAME>_fk

For the OP’s table this would be Link_lession_id_fk, for example.

You can't have two elements with the same ID.

Aside from that, you are defining them as block elemnts, meaning (in layman's terms) that they are being forced to appear on their own line.

Instead, try something like this:

<div class="link"><a href="..."><img src="..."... /></a></div>
<div class="link"><a href="..."><img src="..."... /></a></div>

CSS:

.link {
    width: 50%;
    float: left;
    text-align: center;
}

You are probably attempting to use Gmail's servers on port 25 to deliver mail to a third party over an unauthenticated connection. Gmail doesn't let you do this, because then anybody could use Gmail's servers to send mail to anybody else. This is called an open relay and was a common enabler of spam in the early days. Open relays are no longer acceptable on the Internet.

You will need to ask your SMTP client to connect to Gmail using an authenticated connection, probably on port 587.

Just need to try this:

string smtpAddress = "smtp.gmail.com";
int portNumber = 587;
bool enableSSL = true;
string emailFrom = "companyemail";
string password = "password";
string emailTo = "Your email";
string subject = "Hello!";
string body = "Hello, Mr.";
MailMessage mail = new MailMessage();
mail.From = new MailAddress(emailFrom);
mail.To.Add(emailTo);
mail.Subject = subject;
mail.Body = body;
mail.IsBodyHtml = true;
using (SmtpClient smtp = new SmtpClient(smtpAddress, portNumber))
{
   smtp.Credentials = new NetworkCredential(emailFrom, password);
   smtp.EnableSsl = enableSSL;
   smtp.Send(mail);
}

You should write something like this.

<a href="#" style="text-decoration:none;">BOOK NOW</a>

Since you don't care which id to return I stick with MAX id for each email to simplify SQL query, give it a try

;WITH ue(id)
 AS
 (
   SELECT MAX(id)
   FROM table
   GROUP BY email
 )
 SELECT * FROM table t
 INNER JOIN ue ON ue.id = t.id

If you are still recieving the InvalidKeyException when running my AES encryption program with 256 bit keys, but not with 128 bit keys, it is because you have not installed the new policy JAR files correctly, and has nothing to do with BouncyCastle (which is also restrained by those policy files). Try uninstalling, then re-installing java and then replaceing the old jar's with the new unlimited strength ones. Other than that, I'm out of ideas, best of luck.

You can see the policy files themselves if you open up the lib/security/local_policy.jar and US_export_policy.jar files in winzip and look at the conatined *.policy files in notepad and make sure they look like this:

default_local.policy:

    // Country-specific policy file for countries with no limits on crypto strength.
grant {
    // There is no restriction to any algorithms.
    permission javax.crypto.CryptoAllPermission; 
};

default_US_export.policy:

// Manufacturing policy file.
grant {
    // There is no restriction to any algorithms.
    permission javax.crypto.CryptoAllPermission; 
};

I received this error because of percentage signs in the password.

Here is what I did recently in PHP on one of my bigger systems:

1. User inputs newsletter text and selects the recipients (which generates a query to retrieve the email addresses for later).

2. Add the newsletter text and recipients query to a row in mysql table called *email_queue*

   • (The table email_queue has the columns "to" "subject" "body" "priority")

3. I created another script, which runs every minute as a cron job. It uses the SwiftMailer class. This script simply:

   • during business hours, sends all email with priority == 0

   • after hours, send other emails by priority

Depending on the hosts settings, I can now have it throttle using standard swiftmailers plugins like antiflood and throttle...

$mailer->registerPlugin(new Swift_Plugins_AntiFloodPlugin(50, 30));

and

$mailer->registerPlugin(new Swift_Plugins_ThrottlerPlugin( 100, Swift_Plugins_ThrottlerPlugin::MESSAGES_PER_MINUTE ));

etc, etc..

I have expanded it way beyond this pseudocode, with attachments, and many other configurable settings, but it works very well as long as your server is setup correctly to send email. (Probably wont work on shared hosting, but in theory it should...) Swiftmailer even has a setting

$message->setReturnPath

Which I now use to track bounces...

Happy Trails! (Happy Emails?)

It's simple...

=CONCATENATE(A1, ",")

Example: if [email protected] is in the A1 cell then write in another cell: =CONCATENATE(A1, ",")

[email protected] After this formula you will get [email protected],

For remove formula: copy that cell and use Alt + E + S + V or paste special value.

The length of a base64 encoded string is always a multiple of 4. If it is not a multiple of 4, then = characters are appended until it is. A query string of the form ?name=value has problems when the value contains = charaters (some of them will be dropped, I don't recall the exact behavior). You may be able to get away with appending the right number of = characters before doing the base64 decode.

Edit 1

You may find that the value of UserNameToVerify has had "+"'s changed to " "'s so you may need to do something like so:

a = a.Replace(" ", "+");

This should get the length right;

int mod4 = a.Length % 4;
if (mod4 > 0 )
{
    a += new string('=', 4 - mod4);
}

Of course calling UrlEncode (as in LukeH's answer) should make this all moot.

This works best

Screenshot

SELECT RollId, count(*) AS c 
    FROM `tblstudents` 
    GROUP BY RollId 
    HAVING c > 1 
    ORDER BY c DESC

To center a block object (e.g. the ul) you need to set a width on it and then you can set that objects left and right margins to auto.

To center the inline content of block object (e.g. the inline content of li) you can set the css property text-align: center;.

First download the JavaMail API and make sure the relevant jar files are in your classpath.

Here's a full working example using GMail.

import java.util.*;
import javax.mail.*;
import javax.mail.internet.*;

public class Main {

    private static String USER_NAME = "*****";  // GMail user name (just the part before "@gmail.com")
    private static String PASSWORD = "********"; // GMail password
    private static String RECIPIENT = "[email protected]";

    public static void main(String[] args) {
        String from = USER_NAME;
        String pass = PASSWORD;
        String[] to = { RECIPIENT }; // list of recipient email addresses
        String subject = "Java send mail example";
        String body = "Welcome to JavaMail!";

        sendFromGMail(from, pass, to, subject, body);
    }

    private static void sendFromGMail(String from, String pass, String[] to, String subject, String body) {
        Properties props = System.getProperties();
        String host = "smtp.gmail.com";
        props.put("mail.smtp.starttls.enable", "true");
        props.put("mail.smtp.host", host);
        props.put("mail.smtp.user", from);
        props.put("mail.smtp.password", pass);
        props.put("mail.smtp.port", "587");
        props.put("mail.smtp.auth", "true");

        Session session = Session.getDefaultInstance(props);
        MimeMessage message = new MimeMessage(session);

        try {
            message.setFrom(new InternetAddress(from));
            InternetAddress[] toAddress = new InternetAddress[to.length];

            // To get the array of addresses
            for( int i = 0; i < to.length; i++ ) {
                toAddress[i] = new InternetAddress(to[i]);
            }

            for( int i = 0; i < toAddress.length; i++) {
                message.addRecipient(Message.RecipientType.TO, toAddress[i]);
            }

            message.setSubject(subject);
            message.setText(body);
            Transport transport = session.getTransport("smtp");
            transport.connect(host, from, pass);
            transport.sendMessage(message, message.getAllRecipients());
            transport.close();
        }
        catch (AddressException ae) {
            ae.printStackTrace();
        }
        catch (MessagingException me) {
            me.printStackTrace();
        }
    }
}

Naturally, you'll want to do more in the catch blocks than print the stack trace as I did in the example code above. (Remove the catch blocks to see which method calls from the JavaMail API throw exceptions so you can better see how to properly handle them.)

Thanks to @jodonnel and everyone else who answered. I'm giving him a bounty because his answer led me about 95% of the way to a complete answer.

Use Glib::ustring from glibmm.

It is the only widespread UTF-8 string container (AFAIK). While glyph (not byte) based, it has the same method signatures as std::string so the port should be simple search and replace (just make sure that your data is valid UTF-8 before loading it into a ustring).

I want to extend this topic/answers with the following. As someone mentioned, this auto-generated AssemblyInfo can be an obstacle for the external tools. In my case, using FinalBuilder, I had an issue that AssemblyInfo wasn't getting updated by build action. Apparently, FinalBuilder relies on ~proj file to find location of the AssemblyInfo. I thought, it was looking anywhere under project folder. No. So, changing this

<PropertyGroup>
   <GenerateAssemblyInfo>false</GenerateAssemblyInfo>
</PropertyGroup> 

did only half the job, it allowed custom assembly info if built by VS IDE/MS Build. But I needed FinalBuilder do it too without manual manipulations to assembly info file. I needed to satisfy all programs, MSBuild/VS and FinalBuilder.

I solved this by adding an entry to the existing ItemGroup

<ItemGroup>
   <Compile Remove="Common\**" />
   <Content Remove="Common\**" />
   <EmbeddedResource Remove="Common\**" />
   <None Remove="Common\**" />
   <!-- new added item -->
   <None Include="Properties\AssemblyInfo.cs" />
</ItemGroup>

Now, having this item, FinalBuilder finds location of AssemblyInfo and modifies the file. While action None allows MSBuild/DevEnv ignore this entry and no longer report an error based on Compile action that usually comes with Assembly Info entry in proj files.

C:\Program Files\dotnet\sdk\2.0.2\Sdks\Microsoft.NET.Sdk\build\Microsoft.NET.Sdk.DefaultItems.targets(263,5): error : Duplicate 'Compile' items were included. The .NET SDK includes 'Compile' items from your project directory by default. You can either remove these items from your project file, or set the 'EnableDefaultCompileItems' property to 'false' if you want to explicitly include them in your project file. For more information, see https://aka.ms/sdkimplicititems. The duplicate items were: 'AssemblyInfo.cs'

During the preflight request, you should see the following two headers: Access-Control-Request-Method and Access-Control-Request-Headers. These request headers are asking the server for permissions to make the actual request. Your preflight response needs to acknowledge these headers in order for the actual request to work.

For example, suppose the browser makes a request with the following headers:

Origin: http://yourdomain.com
Access-Control-Request-Method: POST
Access-Control-Request-Headers: X-Custom-Header

Your server should then respond with the following headers:

Access-Control-Allow-Origin: http://yourdomain.com
Access-Control-Allow-Methods: GET, POST
Access-Control-Allow-Headers: X-Custom-Header

Pay special attention to the Access-Control-Allow-Headers response header. The value of this header should be the same headers in the Access-Control-Request-Headers request header, and it can not be '*'.

Once you send this response to the preflight request, the browser will make the actual request. You can learn more about CORS here: http://www.html5rocks.com/en/tutorials/cors/

In Swift use

mapView.showAnnotations(annotationArray, animated: true)

In Objective c

[mapView showAnnotations:annotationArray animated:YES];

An id must be unique in the whole page.

A class may apply to many elements.

Sometimes, it's a good idea to use ids.

In a page, you usually have one footer, one header...

Then the footer may be into a div with an id

<div id="footer" class="...">

and still have a class

If you don't mind importing the sklearn library, I would recommend the method talked on this blog.

import pandas as pd
from sklearn import preprocessing

data = {'score': [234,24,14,27,-74,46,73,-18,59,160]}
cols = data.columns
df = pd.DataFrame(data)
df

min_max_scaler = preprocessing.MinMaxScaler()
np_scaled = min_max_scaler.fit_transform(df)
df_normalized = pd.DataFrame(np_scaled, columns = cols)
df_normalized

For macOS catalina try this : open Xcode. if not existing. download from App store (about 11GB) then open Xcode>open developer tool>more developer tool and used my apple id to download a compatible command line tool. Then, after downloading, I opened Xcode>Preferences>Locations>Command Line Tool and selected the newly downloaded command line tool from downloads.

Its not mentioned on doc, but Left sidebar on Bootstrap 3 is possible using "Collapse" method.

As mentioned by bootstrap.js :

Collapse.prototype.dimension = function () {
    var hasWidth = this.$element.hasClass('width')
    return hasWidth ? 'width' : 'height'
  }

This mean, adding class "width" into target, will expand by width instead of height :

http://jsfiddle.net/2316sfbz/2/

The easiest way to do it is to link the CSV-file into the Access database as a table. Then you can work on this table as if it was an ordinary access table, for instance by creating an appropriate query based on this table that returns exactly what you want.

You can link the table either manually or with VBA like this

DoCmd.TransferText TransferType:=acLinkDelim, TableName:="tblImport", _
    FileName:="C:\MyData.csv", HasFieldNames:=true

UPDATE

Dim db As DAO.Database

' Re-link the CSV Table
Set db = CurrentDb
On Error Resume Next:   db.TableDefs.Delete "tblImport":   On Error GoTo 0
db.TableDefs.Refresh
DoCmd.TransferText TransferType:=acLinkDelim, TableName:="tblImport", _
    FileName:="C:\MyData.csv", HasFieldNames:=true
db.TableDefs.Refresh

' Perform the import
db.Execute "INSERT INTO someTable SELECT col1, col2, ... FROM tblImport " _
   & "WHERE NOT F1 IN ('A1', 'A2', 'A3')"
db.Close:   Set db = Nothing

All the gory details can be found in the current RFC on the topic: RFC 3986 (Uniform Resource Identifier (URI): Generic Syntax)

Based on this related answer, you are looking at a list that looks like: A-Z, a-z, 0-9, -, ., _, ~, :, /, ?, #, [, ], @, !, $, &, ', (, ), *, +, ,, ;, %, and =. Everything else must be url-encoded. Also, some of these characters can only exist in very specific spots in a URI and outside of those spots must be url-encoded (e.g. % can only be used in conjunction with url encoding as in %20), the RFC has all of these specifics.

It should be the current number of active connections. Run the command processlist to make sure.

URL for reference: http://www.devdaily.com/blog/post/mysql/how-show-open-database-connections-mysql

EDIT: Number of DB connections opened Please take a look here, the actual number of threads (connections) are described here!

In droupDown list there are two item add property.

1) Text 2) value

If you want to get text property then u use selecteditem.text

and If you want to select value property then use selectedvalue property

In your case i thing both value and text property are the same so no matter if u use selectedvalue or selecteditem.text

If both are different then they give us different results

Read a file line by line and execute commands: 4 answers

This is because there is not only 1 answer...

1. shell command line expansion
2. xargs dedicated tool
3. while read with some remarks
4. while read -u using dedicated fd, for interactive processing (sample)

Regarding the OP request: running chmod on all targets listed in file, xargs is the indicated tool. But for some other applications, small amount of files, etc...

1. Read entire file as command line argument.

   If your file is not too big and all files are well named (without spaces or other special chars like quotes), you could use shell command line expansion. Simply:

   chmod 755 $(<file.txt)
   

   For small amount of files (lines), this command is the lighter one.

2. xargs is the right tool

   For bigger amount of files, or almost any number of lines in your input file...

   For many binutils tools, like chown, chmod, rm, cp -t ...

   xargs chmod 755 <file.txt
   

   If you have special chars and/or a lot of lines in file.txt.

   xargs -0 chmod 755 < <(tr \\n \\0 <file.txt)
   

   if your command need to be run exactly 1 time by entry:

   xargs -0 -n 1 chmod 755 < <(tr \\n \\0 <file.txt)
   

   This is not needed for this sample, as chmod accept multiple files as argument, but this match the title of question.

   For some special case, you could even define location of file argument in commands generateds by xargs:

   xargs -0 -I '{}' -n 1 myWrapper -arg1 -file='{}' wrapCmd < <(tr \\n \\0 <file.txt)
   

   Test with seq 1 5 as input

   Try this:

   xargs -n 1 -I{} echo Blah {} blabla {}.. < <(seq 1 5)
   Blah 1 blabla 1..
   Blah 2 blabla 2..
   Blah 3 blabla 3..
   Blah 4 blabla 4..
   Blah 5 blabla 5..
   

   Where commande is done once per line.

3. while read and variants.

   As OP suggest cat file.txt | while read in; do chmod 755 "$in"; done will work, but there is 2 issues:

   • cat | is an useless fork, and

   • | while ... ;done will become a subshell where environment will disapear after ;done.

   So this could be better written:

   while read in; do chmod 755 "$in"; done < file.txt
   

   But,

   • You may be warned about $IFS and read flags:

     help read
     

     read: read [-r] ... [-d delim] ... [name ...]
         ...
         Reads a single line from the standard input... The line is split
         into fields as with word splitting, and the first word is assigned
         to the first NAME, the second word to the second NAME, and so on...
         Only the characters found in $IFS are recognized as word delimiters.
         ...
         Options:
           ...
           -d delim   continue until the first character of DELIM is read, 
                      rather than newline
           ...
           -r do not allow backslashes to escape any characters
         ...
         Exit Status:
         The return code is zero, unless end-of-file is encountered...
     

     In some case, you may need to use

     while IFS= read -r in;do chmod 755 "$in";done <file.txt
     

     For avoiding problems with stranges filenames. And maybe if you encouter problems with UTF-8:

     while LANG=C IFS= read -r in ; do chmod 755 "$in";done <file.txt
     

   • While you use STDIN for reading file.txt, your script could not be interactive (you cannot use STDIN anymore).

4. while read -u, using dedicated fd.

   Syntax: while read ...;done <file.txt will redirect STDIN to file.txt. That mean, you won't be able to deal with process, until they finish.

   If you plan to create interactive tool, you have to avoid use of STDIN and use some alternative file descriptor.

   Constants file descriptors are: 0 for STDIN, 1 for STDOUT and 2 for STDERR. You could see them by:

   ls -l /dev/fd/
   

   or

   ls -l /proc/self/fd/
   

   From there, you have to choose unused number, between 0 and 63 (more, in fact, depending on sysctl superuser tool) as file descriptor:

   For this demo, I will use fd 7:

   exec 7<file.txt      # Without spaces between `7` and `<`!
   ls -l /dev/fd/
   

   Then you could use read -u 7 this way:

   while read -u 7 filename;do
       ans=;while [ -z "$ans" ];do
           read -p "Process file '$filename' (y/n)? " -sn1 foo
           [ "$foo" ]&& [ -z "${foo/[yn]}" ]&& ans=$foo || echo '??'
       done
       if [ "$ans" = "y" ] ;then
           echo Yes
           echo "Processing '$filename'."
       else
           echo No
       fi
   done 7<file.txt
   

   done
   

   To close fd/7:

   exec 7<&-            # This will close file descriptor 7.
   ls -l /dev/fd/
   

   Nota: I let striked version because this syntax could be usefull, when doing many I/O with parallels process:

   mkfifo sshfifo
   exec 7> >(ssh -t user@host sh >sshfifo)
   exec 6<sshfifo
   

The best source for rationale for a Python addition would be its PEP: PEP 389: argparse - New Command Line Parsing Module, in particular, the section entitled, Why aren't getopt and optparse enough?

'a' in x

and a quick search reveals some nice information about it: http://docs.python.org/3/tutorial/datastructures.html#dictionaries

Simply because you don't have c++ compiler installed there in your machine, check the following

• Download Microsoft Visual C++ 2008 from this page. That is a generally useful page anyway, so you should probably bookmark it. For Python 3.3+ use MS Visual C++ 2010. Install it.

• Open Windows explorer (the file browser) and search for the location of ‘vcvarsall.bat’ and cut it to your clipboard.

• run regedit from the Windows start key. You will need admin privilges.

• Add a registry entry to HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\VisualStudio\9.0\Setup\VC\ProductDir (64 bit Windows) or HKEY_LOCAL_MACHINE\Software\Microsoft\VisualStudio\9.0\Setup\VC\ProductDir (32 bit) as described here.

Hint: 0.9 in the registery directory is the currently installed version of your visual studio, if you running VS 2013, you have to find the path HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\VisualStudio\12.0....

• At the Windows start key, type cmd to get a command shell. If you need to, go to your virtual environment and run activate.bat.

• pip install or whatever you use to install it.

OOXML files like those that come from Excel 2007 are encoded in UTF-8, according to wikipedia. I don't know about CSV files, but it stands to reason it would use the same format...

hr {
    border-top:1px dotted #000;
    /*Rest of stuff here*/
}

I tried all the detailed steps by JaMIT and still got stumped by this error. After a good amount of head-banging, I figured it out. I was careless. You should be able to reproduce this painful-to-look-at error w/ the following sample code.

[jaswantp@jaswant-arch build]$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/10.2.0/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with: /build/gcc/src/gcc/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++,d --with-isl --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-install-libiberty --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-libunwind-exceptions --disable-werror gdc_include_dir=/usr/include/dlang/gdc
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 10.2.0 (GCC) 

// CelesetialBody.h
class CelestialBody{
public:
    virtual void Print();
protected:
    CelestialBody();
    virtual ~CelestialBody();
};

// CelestialBody.cpp
#include "CelestialBody.h"

CelestialBody::CelestialBody() {}

CelestialBody::~CelestialBody() = default;

void CelestialBody::Print() {}

// Planet.h
#include "CelestialBody.h"

class Planet : public CelestialBody
{
public:
    void Print() override;
protected:
    Planet();
    ~Planet() override;
};

// Planet.cpp
#include "Planet.h"

Planet::Planet() {}
Planet::~Planet() {}

void Print() {} // Deliberately forgot to prefix `Planet::`

# CMakeLists.txt
cmake_minimum_required(VERSION 3.12)
project (space_engine)
add_library (CelestialBody SHARED CelestialBody.cpp)
add_library (Planet SHARED Planet.cpp)
target_include_directories (CelestialBody PRIVATE ${CMAKE_CURRENT_LIST_DIR})  
target_include_directories (Planet PRIVATE ${CMAKE_CURRENT_LIST_DIR})    
target_link_libraries (Planet PUBLIC CelestialBody)

# hardened linker flags to catch undefined symbols
target_link_options(Planet 
    PRIVATE 
    -Wl,--as-needed
    -Wl,--no-undefined
)

And we get our favourite error.

$ mkdir build
$ cd build
$ cmake ..
$ make
[ 50%] Built target CelestialBody
Scanning dependencies of target Planet
[ 75%] Building CXX object CMakeFiles/Planet.dir/Planet.cpp.o
[100%] Linking CXX shared library libPlanet.so
/usr/bin/ld: CMakeFiles/Planet.dir/Planet.cpp.o: in function `Planet::Planet()':
Planet.cpp:(.text+0x1b): undefined reference to `vtable for Planet'
/usr/bin/ld: CMakeFiles/Planet.dir/Planet.cpp.o: in function `Planet::~Planet()':
Planet.cpp:(.text+0x3d): undefined reference to `vtable for Planet'
collect2: error: ld returned 1 exit status
make[2]: *** [CMakeFiles/Planet.dir/build.make:104: libPlanet.so] Error 1
make[1]: *** [CMakeFiles/Makefile2:97: CMakeFiles/Planet.dir/all] Error 2
make: *** [Makefile:103: all] Error 2

What I've done in Planet.cpp should of course be resolved with this tip

1. Look at your class definition. Find the first non-inline virtual function that is not pure virtual (not "= 0") and whose definition you provide (not "= default").

from JaMIT's answer. If there is anyone else who tried all the above and nothing worked, maybe you too, like me, carelessly forgot to prefix <ClassName>:: to one or more member functions.

Either I need to get my eyes checked or I need to get some sleep.

You can get result distinct by two columns use below SQL:

SELECT COUNT(*) FROM (SELECT DISTINCT c1, c2 FROM [TableEntity]) TE

As I've posted in a similar question, I've had good success with creating a dummy non-fixed nav bar right before my real fixed nav bar.

<nav class="navbar navbar-default"></nav> <!-- Dummy nav bar -->
<nav class="navbar navbar-default navbar-fixed-top"> <!-- Real nav bar -->
    <!-- Nav bar details -->
</nav>

The spacing works out great on all screen sizes.

use this simple cod:

    <!DOCTYPE html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1">
<style>
body {font-family: Arial, Helvetica, sans-serif;}

#myImg {
  border-radius: 5px;
  cursor: pointer;
  transition: 0.3s;
}

#myImg:hover {opacity: 0.7;}

/* The Modal (background) */
.modal {
  display: none; /* Hidden by default */
  position: fixed; /* Stay in place */
  z-index: 1; /* Sit on top */
  padding-top: 100px; /* Location of the box */
  left: 0;
  top: 0;
  width: 100%; /* Full width */
  height: 100%; /* Full height */
  overflow: auto; /* Enable scroll if needed */
  background-color: rgb(0,0,0); /* Fallback color */
  background-color: rgba(0,0,0,0.9); /* Black w/ opacity */
}

/* Modal Content (image) */
.modal-content {
  margin: auto;
  display: block;
  width: 80%;
  max-width: 700px;
}

/* Caption of Modal Image */
#caption {
  margin: auto;
  display: block;
  width: 80%;
  max-width: 700px;
  text-align: center;
  color: #ccc;
  padding: 10px 0;
  height: 150px;
}

/* Add Animation */
.modal-content, #caption {  
  -webkit-animation-name: zoom;
  -webkit-animation-duration: 0.6s;
  animation-name: zoom;
  animation-duration: 0.6s;
}

@-webkit-keyframes zoom {
  from {-webkit-transform:scale(0)} 
  to {-webkit-transform:scale(1)}
}

@keyframes zoom {
  from {transform:scale(0)} 
  to {transform:scale(1)}
}

/* The Close Button */
.close {
  position: absolute;
  top: 15px;
  right: 35px;
  color: #f1f1f1;
  font-size: 40px;
  font-weight: bold;
  transition: 0.3s;
}

.close:hover,
.close:focus {
  color: #bbb;
  text-decoration: none;
  cursor: pointer;
}

/* 100% Image Width on Smaller Screens */
@media only screen and (max-width: 700px){
  .modal-content {
    width: 100%;
  }
}
</style>
</head>
<body>

<h2>Image Modal</h2>
<p>In this example, we use CSS to create a modal (dialog box) that is hidden by default.</p>
<p>We use JavaScript to trigger the modal and to display the current image inside the modal when it is clicked on. Also note that we use the value from the image's "alt" attribute as an image caption text inside the modal.</p>

<img id="myImg" src="img_snow.jpg" alt="Snow" style="width:100%;max-width:300px">

<!-- The Modal -->
<div id="myModal" class="modal">
  <span class="close">&times;</span>
  <img class="modal-content" id="img01">
  <div id="caption"></div>
</div>

<script>
// Get the modal
var modal = document.getElementById("myModal");

// Get the image and insert it inside the modal - use its "alt" text as a caption
var img = document.getElementById("myImg");
var modalImg = document.getElementById("img01");
var captionText = document.getElementById("caption");
img.onclick = function(){
  modal.style.display = "block";
  modalImg.src = this.src;
  captionText.innerHTML = this.alt;
}

// Get the <span> element that closes the modal
var span = document.getElementsByClassName("modal")[0];

// When the user clicks on <span> (x), close the modal
span.onclick = function() { 
  modal.style.display = "none";
}
</script>

</body>
</html>

this code open and close your photo.

Sounds like a job for set with a custom IFS.

IFS=-
set $STR
var1=$1
var2=$2

(You will want to do this in a function with a local IFS so you don't mess up other parts of your script where you require IFS to be what you expect.)

In my case, strangely enough, I was missing the import of the class it was complaining about and my IDE didn't detect it.

If you want to search as string, you can cast to text like this:

SELECT * FROM books WHERE price::TEXT LIKE '123%'

flask.redirect(location, code=302)

Docs can be found here.

For a Windows machine start the mongod process by specifying the dbpath:

mongod --dbpath \mongodb\data

Reference: Manage mongod Processes

The simple difference between select Into and Insert Into is: --> Select Into don't need existing table. If you want to copy table A data, you just type Select * INTO [tablename] from A. Here, tablename can be existing table or new table will be created which has same structure like table A.

--> Insert Into do need existing table.INSERT INTO [tablename] SELECT * FROM A;. Here tablename is an existing table.

Select Into is usually more popular to copy data especially backup data.

You can use as per your requirement, it is totally developer choice which should be used in his scenario.

Performance wise Insert INTO is fast.

References :

https://www.w3schools.com/sql/sql_insert_into_select.asp https://www.w3schools.com/sql/sql_select_into.asp

You should just install python 3.6. I tried it and it worked. Just install that version of python and just do the normal download process (pip install pyaudio).

I think you are forgetting about the border. Having a one-pixel-wide border on the Div will take away two pixels of total length. Therefore it will appear as though the div is two pixels shorter than it actually is.

It is the severity level of the error. The levels are from 11 - 20 which throw an error in SQL. The higher the level, the more severe the level and the transaction should be aborted.

You will get the syntax error when you do:

RAISERROR('Cannot Insert where salary > 1000').

Because you have not specified the correct parameters (severity level or state).

If you wish to issue a warning and not an exception, use levels 0 - 10.

From MSDN:

severity

Is the user-defined severity level associated with this message. When using msg_id to raise a user-defined message created using sp_addmessage, the severity specified on RAISERROR overrides the severity specified in sp_addmessage. Severity levels from 0 through 18 can be specified by any user. Severity levels from 19 through 25 can only be specified by members of the sysadmin fixed server role or users with ALTER TRACE permissions. For severity levels from 19 through 25, the WITH LOG option is required.

state

Is an integer from 0 through 255. Negative values or values larger than 255 generate an error. If the same user-defined error is raised at multiple locations, using a unique state number for each location can help find which section of code is raising the errors. For detailed description here

I got it:

string clean = Regex.Replace(q, @"[^a-zA-Z0-9\s]", string.Empty);

Didn't know you could put \s in the brackets

You're attempting to free something that isn't a pointer to a "freeable" memory address. Just because something is an address doesn't mean that you need to or should free it.

There are two main types of memory you seem to be confusing - stack memory and heap memory.

• Stack memory lives in the live span of the function. It's temporary space for things that shouldn't grow too big. When you call the function main, it sets aside some memory for your variables you've declared (p,token, and so on).

• Heap memory lives from when you malloc it to when you free it. You can use much more heap memory than you can stack memory. You also need to keep track of it - it's not easy like stack memory!

You have a few errors:

• You're trying to free memory that's not heap memory. Don't do that.

• You're trying to free the inside of a block of memory. When you have in fact allocated a block of memory, you can only free it from the pointer returned by malloc. That is to say, only from the beginning of the block. You can't free a portion of the block from the inside.

For your bit of code here, you probably want to find a way to copy relevant portion of memory to somewhere else...say another block of memory you've set aside. Or you can modify the original string if you want (hint: char value 0 is the null terminator and tells functions like printf to stop reading the string).

EDIT: The malloc function does allocate heap memory*.

"9.9.1 The malloc and free Functions

The C standard library provides an explicit allocator known as the malloc package. Programs allocate blocks from the heap by calling the malloc function."

~Computer Systems : A Programmer's Perspective, 2nd Edition, Bryant & O'Hallaron, 2011

EDIT 2: * The C standard does not, in fact, specify anything about the heap or the stack. However, for anyone learning on a relevant desktop/laptop machine, the distinction is probably unnecessary and confusing if anything, especially if you're learning about how your program is stored and executed. When you find yourself working on something like an AVR microcontroller as H2CO3 has, it is definitely worthwhile to note all the differences, which from my own experience with embedded systems, extend well past memory allocation.

Consider collections.Counter (available from python 2.7 onwards). https://docs.python.org/2/library/collections.html#collections.Counter

I think you can use prtdiag or prtconf on many UNIXs

If you are trying to use AngularJs 1.6.6 as of 21/10/2017 the following parameter works as .success and has been depleted. The .then() method takes two arguments: a response and an error callback which will be called with a response object.

 $scope.login = function () {
        $scope.btntext = "Please wait...!";
        $http({
            method: "POST",
            url: '/Home/userlogin', // link UserLogin with HomeController 
            data: $scope.user
         }).then(function (response) {
            console.log("Result value is : " + parseInt(response));
            data = response.data;
            $scope.btntext = 'Login';
            if (data == 1) {
                window.location.href = '/Home/dashboard';
             }
            else {
            alert(data);
        }
        }, function (error) {

        alert("Failed Login");
        });

The above snipit works for a login page.

You don't need to use arrays.

JSON values can be arrays, objects, or primitives (numbers or strings).

You can write JSON like this:

{ 
    "stuff": {
        "onetype": [
            {"id":1,"name":"John Doe"},
            {"id":2,"name":"Don Joeh"}
        ],
        "othertype": {"id":2,"company":"ACME"}
    }, 
    "otherstuff": {
        "thing": [[1,42],[2,2]]
     }
}

You can use it like this:

obj.stuff.onetype[0].id
obj.stuff.othertype.id
obj.otherstuff.thing[0][1]  //thing is a nested array or a 2-by-2 matrix.
                            //I'm not sure whether you intended to do that.

1. Edit the file /etc/postgresql/<version>/main/pg_hba.conf and find the following line:

   local   all             postgres                                md5
   

2. Edit the line and change md5 at the end to trust and save the file

3. Reload the postgresql service

   $ sudo service postgresql reload
   

4. This will load the configuration files. Now you can modify the postgres user by logging into the psql shell

   $ psql -U postgres
   

5. Update the postgres user's password

   alter user postgres with password 'secure-passwd-here';
   

6. Edit the file /etc/postgresql/<version>/main/pg_hba.conf and change trust back to md5 and save the file

7. Reload the postgresql service

   $ sudo service postgresql reload
   

8. Verify that the password change is working

   $ psql -U postgres -W
   

With this query you can find all Trigger in all tables and all views.

    ;WITH
        TableTrigger
        AS
        (
            Select 
                Object_Kind = 'Table',
                Sys.Tables.Name As TableOrView_Name , 
                Sys.Tables.Object_Id As Table_Object_Id ,
                Sys.Triggers.Name As Trigger_Name, 
                Sys.Triggers.Object_Id As Trigger_Object_Id 
            From Sys.Tables 
            INNER Join Sys.Triggers On ( Sys.Triggers.Parent_id = Sys.Tables.Object_Id )
            Where ( Sys.Tables.Is_MS_Shipped = 0 )
        ),
        ViewTrigger
        AS
        (
            Select 
                Object_Kind = 'View',
                Sys.Views.Name As TableOrView_Name , 
                Sys.Views.Object_Id As TableOrView_Object_Id ,
                Sys.Triggers.Name As Trigger_Name, 
                Sys.Triggers.Object_Id As Trigger_Object_Id 
            From Sys.Views 
            INNER Join Sys.Triggers On ( Sys.Triggers.Parent_id = Sys.Views.Object_Id )
            Where ( Sys.Views.Is_MS_Shipped = 0 )
        ),
        AllObject
        AS
        (
            SELECT * FROM TableTrigger

            Union ALL

            SELECT * FROM ViewTrigger
        )


    Select 
        * 
    From AllObject
    Order By Object_Kind, Table_Object_Id 

/*working only in ipad portrait device*/
@media only screen and (width: 768px) and (height: 1024px) and (orientation:portrait) {
  body{
    background: red !important;
  }  
}
/*working only in ipad landscape device*/
@media all and (width: 1024px) and (height: 768px) and (orientation:landscape){
  body{
    background: green !important;
  }   
}

In the media query of specific devices, please use '!important' keyword to override the default CSS. Otherwise that does not change your webpage view on that particular devices.

You can also use

border-left: 9vw solid #F5E5D6;
border-right: 9vw solid #F5E5D6;     

OR

border: 9vw solid #F5E5D6;

<?php
   $terms = get_the_terms($product->ID, 'product_cat');
      foreach ($terms as $term) {

        $product_cat = $term->name;
           echo $product_cat;
             break;
  }
 ?>

Which whitespace character? The most common is the normal space, which is between each word in my sentences. This is just " ".

It depends on how you validate your XML. If you use XML Schema validation, the correct way of representing null values is with the xsi:nil attribute.

[Source]

I think this is also a solution of this problem.

Change your document type from 'Encode in UTF-8' To 'Encode in UTF-8 without BOM'

I got resolved my problem by doing same changes.

array = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]

array.each { |x| puts x if x % 2 == 0 }

ruby :D

2 4 6 8 10

Using callback plugins, you can have the stdout of your commands output in readable form with the play: gist: human_log.py

Edit for example output:

 _____________________________________
< TASK: common | install apt packages >
 -------------------------------------
        \   ^__^
         \  (oo)\_______
            (__)\       )\/\
                ||----w |
                ||     ||


changed: [10.76.71.167] => (item=htop,vim-tiny,curl,git,unzip,update-motd,ssh-askpass,gcc,python-dev,libxml2,libxml2-dev,libxslt-dev,python-lxml,python-pip)

stdout:
Reading package lists...
Building dependency tree...
Reading state information...
libxslt1-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 24 not upgraded.


stderr:

start:
2015-03-27 17:12:22.132237

end:
2015-03-27 17:12:22.136859

I needed this for something as simple as redirecting all http traffic from the default apache home page on my server to one served over https.

Since I'm still quite green when it comes to configuring apache, I prefer to avoid using mod_rewrite directly and instead went for something simpler like this:

<VirtualHost *:80>
  <Location "/">
     Redirect permanent "https://%{HTTP_HOST}%{REQUEST_URI}"
  </Location>
</VirtualHost>

<VirtualHost *:443>
  DocumentRoot "/var/www/html"
  SSLEngine on
  ...
</VirtualHost>

I like this because it allowed me to use apache variables and that way I didn't have to specify the actual host name since it's just an IP address without an associated domain name.

References: https://stackoverflow.com/a/40291044/2089675

I would prefer using the most easiest method.

Right click on the Wamp icon and go to

Tools > Use a port other than 8080 >

Set a different port, lets say 8081 and that's it. Problem resolved.

You are most welcome.

This is how I do it

    public void B_ODOC_OnClick(Object sender, EventArgs e)
    {
        string script="<script>__doPostBack(\'fileView$ctl01$OTHDOC\',\'{\"EventArgument\":\"OpenModal\",\"EncryptedData\":null}\');</script>";
        Page.ClientScript.RegisterStartupScript(this.GetType(),"JsOtherDocuments",script);               
    }

The second parameter is selected, so use the ! to select the no value when the boolean is false.

<%= Html.RadioButton("blah", !Model.blah) %> Yes 
<%= Html.RadioButton("blah", Model.blah) %> No 

You can open a new powershell window under a specified user credential like this:

start powershell -credential ""

I found that:

git log --reverse

shows commits from start.

As of Cordova 3.5.0-0.2.6 the <icon /> element in config.xml works with the following caveats:

1. The src attribute is a path relative to your project root folder. The issue tracker about this issue reason why the change.

2. The <icon src="..." /> element without resolution/dpi is documented as the icon used by all platforms as the default icon. However, on android builds, the default icon is only copied to the android drawable folder, without specific resolutions set. This makes you custom icon appear in the /res/drawable folder, and the cordova default icon with specific resolutions exists in the other folders inside the final apk (i.e. /res/drawable-ldpi). You must add one icon element in config.xml for each resolution on the android platform.

For instance, if your icon image is in the path www/res/img/icon.png relative to your root project, this lines in config.xml makes your app icon in android works:

<!-- Default application icon -->
<icon src="www/res/img/icon.png" />
<!--
    Default icon should work, but cordova don't overwrite
    the default on all densities
-->
<icon src="www/res/img/icon.png" platform="android" density="ldpi" />
<icon src="www/res/img/icon.png" platform="android" density="mdpi" />
<icon src="www/res/img/icon.png" platform="android" density="hdpi" />
<icon src="www/res/img/icon.png" platform="android" density="xhdpi" />

With that configuration in place, you can have a single image icon for all resolutions overwriting the default cordova icon, and without custom hoooks. Simply building with cordova build android should do the trick.

1. In devDependencies typescript is 1.7.3 but you have 1.7.5 fix common one.
2. Import your js files in the correct order in index.html. for more info refer this repository https://github.com/pkozlowski-opensource/ng2-play/blob/master/index.html or refer to my repository here

   https://github.com/MrPardeep/Angular2-DatePicker

index.html

<script src="node_modules/angular2/bundles/angular2-polyfills.js"></script>
    <script src="node_modules/es6-shim/es6-shim.min.js"></script>
    <script src="node_modules/systemjs/dist/system.src.js"></script>

    <script>
        System.config({
                    defaultJSExtensions: true,
                    map: {
                        rxjs: 'node_modules/rxjs'
                    },
                    packages: {
                        rxjs: {
                        defaultExtension: 'js'
                      }
                    }
                });
    </script>
    <script src="node_modules/angular2/bundles/angular2.dev.js"></script>
    <script src="node_modules/rxjs/bundles/Rx.js"></script>
    <script src="node_modules/angular2/bundles/router.dev.js"></script>
    <script src="node_modules/angular2/bundles/http.dev.js"></script>

<script>
    System.import('dist/bootstrap');
</script> 

.container {_x000D_
  background: tomato;_x000D_
  display: flex;_x000D_
  flex-flow: row wrap;_x000D_
  align-content: space-between;_x000D_
  justify-content: space-between;_x000D_
}_x000D_
_x000D_
.item {_x000D_
  width: 100px;_x000D_
  height: 100px;_x000D_
  background: gold;_x000D_
  border: 1px solid black;_x000D_
  font-size: 30px;_x000D_
  line-height: 100px;_x000D_
  text-align: center;_x000D_
  margin: 10px;_x000D_
}

<div class="container">_x000D_
  <div>_x000D_
    <div class="item">1</div>_x000D_
    <div class="item">2</div>_x000D_
    <div class="item">3</div>_x000D_
  </div>_x000D_
  <div>_x000D_
    <div class="item">4</div>_x000D_
    <div class="item">5</div>_x000D_
    <div class="item">6</div>_x000D_
  </div>_x000D_
  <div>_x000D_
    <div class="item">7</div>_x000D_
    <div class="item">8</div>_x000D_
    <div class="item">9</div>_x000D_
  </div>_x000D_
  <div class="item">10</div>_x000D_
</div>

you could try wrapping the items in a dom element like here. with this you dont have to know a lot of css just having a good structure will solve the problem.

See this question for some insight into best-practices for your situation.

The topline suggestion (from said link) is to standardize a response structure (for both success and failure) that your handler looks for, catching all Exceptions at the server layer and converting them to the same structure. For example (from this answer):

{
    success:false,
    general_message:"You have reached your max number of Foos for the day",
    errors: {
        last_name:"This field is required",
        mrn:"Either SSN or MRN must be entered",
        zipcode:"996852 is not in Bernalillo county. Only Bernalillo residents are eligible"
    }
} 

This is the approach stackoverflow uses (in case you were wondering how others do this kind of thing); write operations like voting have "Success" and "Message" fields, regardless of if the vote was allowed or not:

{ Success:true, NewScore:1, Message:"", LastVoteTypeId:3 }

As @Phil.H pointed out, you should be consistent in whatever you choose. This is easier said than done (as is everything in development!).

For example, if you submit comments too quickly on SO, instead of being consistent and returning

{ Success: false, Message: "Can only comment once every blah..." }

SO will throw a server exception (HTTP 500) and catch it in their error callback.

As much as it "feels right" to use jQuery + .ashx + HTTP [status codes] IMO it will add more complexity to your client-side code base than it's worth. Realize that jQuery does not "detect" error codes but rather the lack of a success code. This is an important distinction when trying to design a client around http response codes with jQuery. You only get two choices (was it a "success" or "error"?), which you have to branch further on your own. If you have a small number of WebServices driving a small number of pages then it might be okay, but anything larger scale may get messy.

It's much more natural in a .asmx WebService (or WCF for that matter) to return a custom object than to customize the HTTP status code. Plus you get the JSON serialization for free.

@Debasish Sahu, your answer is an answer to another question, namely: how to know which button (or any other control) was clicked when there is a common handler for a couple of controls? So I'm giving an answer to this question how I usually do it, almost the same as yours, but note that also works without type conversion when it handles the same type of Controls:

Private Sub btn_done_clicked(ByVal sender As System.Object, ByVal e As System.EventArgs)
    Dim selectedBtn As Button = sender
    MsgBox("you have clicked button " & selectedBtn.Name)
End Sub

If you already have a list and want to add values from a delimited string, you can use AddRange or InsertRange. For example:

existingList.AddRange(names.Split(','));

df <- data.frame(a = 1:2, b = letters[1:2]) 
df[rep(seq_len(nrow(df)), each = 2), ]

If you'd like, you could use require. This is a way to have a conditional require statement.

let something = null;
let other = null;

if (condition) {
    something = require('something');
    other = require('something').other;
}
if (something && other) {
    something.doStuff();
    other.doOtherStuff();
}

Passing structs to functions by reference: simply :)

#define maxn 1000

struct solotion
{
    int sol[maxn];
    int arry_h[maxn];
    int cat[maxn];
    int scor[maxn];

};

void inser(solotion &come){
    come.sol[0]=2;
}

void initial(solotion &come){
    for(int i=0;i<maxn;i++)
        come.sol[i]=0;
}

int main()
{
    solotion sol1;
    inser(sol1);
    solotion sol2;
    initial(sol2);
}

The easiest way is to set some variable in the file that calls include, such as

$including = true;

Then in the file that's being included, check for the variable

if (!$including) exit("direct access not permitted");

try setting the attribute for td so:

.topic td{ height: 14px };

Try this using hover function with fadein fadeout animations

$('ul.nav li.dropdown').hover(function() {
  $(this).find('.dropdown-menu').stop(true, true).delay(200).fadeIn(500);
}, function() {
  $(this).find('.dropdown-menu').stop(true, true).delay(200).fadeOut(500);
});

Expanding from gordy's answer:

Good job btw. But it also allowed + in the front. This will remove it.

    scope.$watch('inputValue', function (newValue, oldValue) {
        var arr = String(newValue).split("");
        if (arr.length === 0) return;
        if (arr.length === 1 && (arr[0] == '-' || arr[0] === '.')) return;
        if (arr.length === 2 && newValue === '-.') return;
        if (isNaN(newValue)) {
            scope.inputValue = oldValue;
        }
        if (arr.length > 0) {
            if (arr[0] === "+") {
                scope.inputValue = oldValue;
            }
        }
    });

You can also override settings, particularly useful in tests:

from django.test import override_settings

with override_settings(USE_TZ=False):
    # Insert your code that causes the warning here
    pass

This will prevent you from seeing the warning, at the same time anything in your code that requires a timezone aware datetime may give you problems. If this is the case, see kravietz answer.

DO NOT Use GUID For Key

ScriptManager.RegisterClientScriptBlock(this.Page, typeof(UpdatePanel) 
       Guid.NewGuid().ToString(), myScript, true);

and if you want to do that , call Something Like this function

 public static string GetGuidClear(string x)
 {
      return x.Replace("-", "").Replace("0", "").Replace("1", "")
              .Replace("2",  "").Replace("3", "").Replace("4", "")
              .Replace("5", "").Replace("6", "").Replace("7", "")
              .Replace("8", "").Replace("9", "");
 }

There's not really a best way. Both are quite the same, unless you want to do some additional processing using the parameters passed to the constructor during initialization or if you want to ensure a coherent state just after calling the constructor. If it is the case, prefer the first one.

But for readability/maintainability reasons, avoid creating constructors with too many parameters.

In this case, both will do.

This question seems to be ambiguous.

I'll try with my interpretation of the request.

def do_something(data)
   puts "Found! #{data}"
end

a = { 'x' => 'test', 'y' => 'foo', 'z' => 'bar' }
a.each { |key,value| do_something(value) if key == 'x' }

This will loop over all the key,value pairs and do something only if the key is 'x'.

Another solution: change margins. Depending on the siblings of the button, display should be modified.

button {
    display:      block;
    margin-left:  auto;
    margin-right: 0;
}

In Kotlin following works fine for me:

val id = resources.getIdentifier("your_resource_name", "drawable", context?.getPackageName())

If resource is place in mipmap folder, you can use parameter "mipmap" instead of "drawable".

May be I come later to answer but right now I'm facing with this... if helps there are one more solution (the way i solved it).

    var query2 = (
    from users in Repo.T_Benutzer
    join mappings in Repo.T_Benutzer_Benutzergruppen on mappings.BEBG_BE equals users.BE_ID into tmpMapp
    join groups in Repo.T_Benutzergruppen on groups.ID equals mappings.BEBG_BG into tmpGroups
    from mappings in tmpMapp.DefaultIfEmpty()
    from groups in tmpGroups.DefaultIfEmpty()
    select new
    {
         UserId = users.BE_ID
        ,UserName = users.BE_User
        ,UserGroupId = mappings.BEBG_BG
        ,GroupName = groups.Name
    }

);

By the way, I tried using the Stefan Steiger code which also helps but it was slower as hell.

The other solution is attaching the image as attachment and then referencing it html code using cid.

HTML Code:

<html>
    <head>
    </head>
    <body>
        <img width=100 height=100 id="1" src="cid:Logo.jpg">
    </body>
</html>

C# Code:

EmailMessage email = new EmailMessage(service);
email.Subject = "Email with Image";
email.Body = new MessageBody(BodyType.HTML, html);
email.ToRecipients.Add("[email protected]");
string file = @"C:\Users\acv\Pictures\Logo.jpg";
email.Attachments.AddFileAttachment("Logo.jpg", file);
email.Attachments[0].IsInline = true;
email.Attachments[0].ContentId = "Logo.jpg";
email.SendAndSaveCopy();

You can name the dataframe with the following, and then call the name wherever you like:

import pandas as pd
df = pd.DataFrame( data=np.ones([4,4]) )
df.name = 'Ones'

print df.name
>>>
Ones

Hope that helps.

Remove Postmaster file in "C:\Program Files\PostgreSQL\9.6\data"

and restart the PostgreSQL services

this is a follow up on the patricus [answer][1] above but for nested arrays:

$topLevelFields =  ['id','status'];
$userFields = ['first_name','last_name','email','phone_number','op_city_id'];

return $onlineShoppers->map(function ($user) { 
    return collect($user)->only($topLevelFields)
                             ->merge(collect($user['user'])->only($userFields))->all();  
    })->all();

Yes, you can change the default shell from Explorer.exe to a specific application.

In Regedit, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon. The current shell should be Explorer.exe. Change it to YourApp.exe. That will change the shell for all users who log on to the machine. If you only want to change it for a specific user, go to the same key in HKEY_CURRENT_USER instead.

Yup, often called a 'cookie jar' Google should provide many examples:

http://devzone.zend.com/16/php-101-part-10-a-session-in-the-cookie-jar/

http://curl.haxx.se/libcurl/php/examples/cookiejar.html <- good example IMHO

Copying that last one here so it does not go away...

Login to on one page and then get another page passing all cookies from the first page along Written by Mitchell

<?php
/*
This script is an example of using curl in php to log into on one page and 
then get another page passing all cookies from the first page along with you.
If this script was a bit more advanced it might trick the server into 
thinking its netscape and even pass a fake referer, yo look like it surfed 
from a local page.
*/

$ch = curl_init();
curl_setopt($ch, CURLOPT_COOKIEJAR, "/tmp/cookieFileName");
curl_setopt($ch, CURLOPT_URL,"http://www.myterminal.com/checkpwd.asp");
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_POSTFIELDS, "UserID=username&password=passwd");

ob_start();      // prevent any output
curl_exec ($ch); // execute the curl command
ob_end_clean();  // stop preventing output

curl_close ($ch);
unset($ch);

$ch = curl_init();
curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
curl_setopt($ch, CURLOPT_COOKIEFILE, "/tmp/cookieFileName");
curl_setopt($ch, CURLOPT_URL,"http://www.myterminal.com/list.asp");

$buf2 = curl_exec ($ch);

curl_close ($ch);

echo "<PRE>".htmlentities($buf2);
?>  

This answer does not work anymore, but I'm looking for a solution.

As of . 2015 / 02 / 24 . there is a website (youtubeinmp4) that allows you to download youtube videos in .mp4 format, you can exploit this (with some JavaScript) to get away with embedding youtube videos in <video> tags. Here is a demo of this in action.

##Pros

• Fairly easy to implement.
• Quite fast server response actually (it doesn't take that much to retrieve the videos).
• Abstraction (the accepted solution, even if it worked properly, would only be applicable if you knew beforehand which videos you were going to play, this works for any user inputted url).

##Cons

• It obviously depends on the youtubeinmp4.com servers and their way of providing a downloading link (which can be passed as a <video> source), so this answer may not be valid in the future.

• You can't choose the video quality.

###JavaScript (after load)

videos = document.querySelectorAll("video");
for (var i = 0, l = videos.length; i < l; i++) {
    var video = videos[i];
    var src = video.src || (function () {
        var sources = video.querySelectorAll("source");
        for (var j = 0, sl = sources.length; j < sl; j++) {
            var source = sources[j];
            var type = source.type;
            var isMp4 = type.indexOf("mp4") != -1;
            if (isMp4) return source.src;
        }
        return null;
    })();
    if (src) {
        var isYoutube = src && src.match(/(?:youtu|youtube)(?:\.com|\.be)\/([\w\W]+)/i);
        if (isYoutube) {
            var id = isYoutube[1].match(/watch\?v=|[\w\W]+/gi);
            id = (id.length > 1) ? id.splice(1) : id;
            id = id.toString();
            var mp4url = "http://www.youtubeinmp4.com/redirect.php?video=";
            video.src = mp4url + id;
        }
    }
}

###Usage (Full)

<video controls="true">
        <source src="www.youtube.com/watch?v=3bGNuRtlqAQ" type="video/mp4" />
    </video>

Standard video format.

###Usage (Mini)

<video src="youtu.be/MLeIBFYY6UY" controls="true"></video>

A little less common but quite smaller, using the shortened url youtu.be as the src attribute directly in the <video> tag.

I had this problem with Django and it was because I had forgotten to start the virtual environment on the backend.

If its sufficiently close you can get away with treating them as coordinates on a flat plane. This works on say, street or city level if perfect accuracy isnt required and all you need is a rough guess on the distance involved to compare with an arbitrary limit.

Must check whether incoming access to port 3306 is block or not by the firewall.

Had problems even when init.py existed in subfolder and all that was missing was adding 'as' after import

from folder.file import Class as Class
import folder.file as functions

If you just want to check the existence of one line, you do not need to create a file. E.g.,

if grep -xq "LINE_TO_BE_MATCHED" FILE_TO_LOOK_IN ; then
  # code for if it exists
else
  # code for if it does not exist
fi  

What you might like to do is look up CSS grid based layouts. This layout method involves specifying some CSS classes to align the page contents to a grid structure. It's more closely related to print-bsed layout than web-based, but it's a technique used on a lot of websites to layout the content into a structure without having to resort to tables.

Try this for starters from Smashing Magazine.

You can use axis:

> axis(side=1, at=c(0:23))

That is, something like this:

plot(0:23, d, type='b', axes=FALSE)
axis(side=1, at=c(0:23))
axis(side=2, at=seq(0, 600, by=100))
box()

SELECT DATEADD(minute, -15, '2000-01-01 08:30:00'); 

The second value (-15 in this case) must be numeric (i.e. not a string like '00:15'). If you need to subtract hours and minutes I would recommend splitting the string on the : to get the hours and minutes and subtracting using something like

SELECT DATEADD(minute, -60 * @h - @m, '2000-01-01 08:30:00'); 

where @h is the hour part of your string and @m is the minute part of your string

EDIT:

Here is a better way:

SELECT CAST('2000-01-01 08:30:00' as datetime) - CAST('00:15' AS datetime)

Here's a partial solution using xml2. Breaking the solution up into smaller pieces generally makes it easier to ensure everything is lined up:

library(xml2)
data <- read_xml("http://forecast.weather.gov/MapClick.php?lat=29.803&lon=-82.411&FcstType=digitalDWML")

# Point locations
point <- data %>% xml_find_all("//point")
point %>% xml_attr("latitude") %>% as.numeric()
point %>% xml_attr("longitude") %>% as.numeric()

# Start time
data %>% 
  xml_find_all("//start-valid-time") %>% 
  xml_text()

# Temperature
data %>% 
  xml_find_all("//temperature[@type='hourly']/value") %>% 
  xml_text() %>% 
  as.integer()

two for loops, one for rows, another for columns, output dataRow(i).Value. Watch out for nulls and DbNulls.

John's answer won't produce .txt files as the OP wants. Use:

split -b=1M -d  file.txt file --additional-suffix=.txt

No need to use any tool for that

1. Set Tab Spaces to 1.
2. Select whole block of code and then press Shift + Tab

Shift + Tab = Shift text right to left

In my case I had the following warnings:

Could not resolve this reference. Could not locate the assembly "x". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.

No way to resolve conflict between "x, Version=1.0.0.248, Culture=neutral, PublicKeyToken=null" and "x". Choosing "x, Version=1.0.0.248

The path to the dll was correct in my .csproj file but I had it referenced twice and the second reference was with another version. Once I deleted the unnecessary reference, the warning disappeared.

Universal way of loading view from xib:

Example:

let myView = Bundle.loadView(fromNib: "MyView", withType: MyView.self)

Implementation:

extension Bundle {

    static func loadView<T>(fromNib name: String, withType type: T.Type) -> T {
        if let view = Bundle.main.loadNibNamed(name, owner: nil, options: nil)?.first as? T {
            return view
        }

        fatalError("Could not load view with type " + String(describing: type))
    }
}

Check if scp is installed or not on from where you want want to copy check using which scp

If it's already installed, it will print you a path like /usr/bin/scp Else, install scp using:

yum -y install openssh-clients

Then copy command

scp -r [email protected]:/var/www/html/database_backup/restore_fullbackup/backup_20140308-023002.sql  /var/www/html/db_bkp/

1. User.destroy

User.destroy(1) will delete user with id == 1 and :before_destroy and :after_destroy callbacks occur. For example if you have associated records

has_many :addresses, :dependent => :destroy

After user is destroyed his addresses will be destroyed too. If you use delete action instead, callbacks will not occur.

2. User.destroy, User.delete

3. User.destroy_all(<conditions>) or User.delete_all(<conditions>)

Notice: User is a class and user is an instance object

I quickly found out there's someone already made a helper: slack-cleaner for this.

And for me it's just:

slack-cleaner --token=<TOKEN> --message --channel jenkins --user "*" --perform

Try making changes as per link

https://docs.gitlab.com/ee/user/project/protected_branches.html

make the project unprotected for maintainer or developer for you to commit

You can use strlen

strlen(urarray);

You can code it yourself so you understand how it works

size_t my_strlen(const char *str)
{
  size_t i;

  for (i = 0; str[i]; i++);
  return i;
}

if you want the size of the array then you use sizeof

char urarray[255];
printf("%zu", sizeof(urarray));

In Java, the equals() method that is inherited from Object is:

public boolean equals(Object other);

In other words, the parameter must be of type Object. This is called overriding; your method public boolean equals(Book other) does what is called overloading to the equals() method.

The ArrayList uses overridden equals() methods to compare contents (e.g. for its contains() and equals() methods), not overloaded ones. In most of your code, calling the one that didn't properly override Object's equals was fine, but not compatible with ArrayList.

So, not overriding the method correctly can cause problems.

I override equals the following everytime:

@Override
public boolean equals(Object other){
    if (other == null) return false;
    if (other == this) return true;
    if (!(other instanceof MyClass)) return false;
    MyClass otherMyClass = (MyClass)other;
    ...test other properties here...
}

The use of the @Override annotation can help a ton with silly mistakes.

Use it whenever you think you are overriding a super class' or interface's method. That way, if you do it the wrong way, you will get a compile error.

Okay, since it already "leaked": You're missing zero, so the correct answer is 512 (511 is the greatest one, but it's 0 to 511, not 1 to 511).

By the way, an good followup exercise would be to generalize this:

How many different values can be represented in n binary digits (bits)?

NSIntegers are not objects, you cast them to long, in order to match the current 64-bit architectures' definition:

NSString *inStr = [NSString stringWithFormat: @"%ld", (long)month];

You can very easily override the val function to trigger change by replacing it with a proxy to the original val function.

just add This code somewhere in your document (after loading jQuery)

(function($){
    var originalVal = $.fn.val;
    $.fn.val = function(){
        var result =originalVal.apply(this,arguments);
        if(arguments.length>0)
            $(this).change(); // OR with custom event $(this).trigger('value-changed');
        return result;
    };
})(jQuery);

A working example: here

(Note that this will always trigger change when val(new_val) is called even if the value didn't actually changed.)

If you want to trigger change ONLY when the value actually changed, use this one:

//This will trigger "change" event when "val(new_val)" called 
//with value different than the current one
(function($){
    var originalVal = $.fn.val;
    $.fn.val = function(){
        var prev;
        if(arguments.length>0){
            prev = originalVal.apply(this,[]);
        }
        var result =originalVal.apply(this,arguments);
        if(arguments.length>0 && prev!=originalVal.apply(this,[]))
            $(this).change();  // OR with custom event $(this).trigger('value-changed')
        return result;
    };
})(jQuery);

Live example for that: http://jsfiddle.net/5fSmx/1/

Would BTrees help? They're part of the Zope Object Database code. Downloading the whole ZODB package is a bit of overkill, but I hope the BTrees module would be at least somewhat separable.

In IPython 0.12 (and possibly earlier), you can use this:

%load_ext autoreload
%autoreload 2

This is essentially the same as the answer by pv., except that the extension has been renamed and is now loaded using %load_ext.

Use the super keyword.

AS Scott mentioned here http://weblogs.asp.net/scottgu/archive/2010/09/30/asp-net-security-fix-now-on-windows-update.aspx After windows installed security update for .net framework, you will meet this problem. just modify the configuration section in your web.config file and switch to a different cookie name.

You can use functional operation for a more neat code

Set<String> set = new HashSet<String>();

set.forEach((s) -> {
     System.out.println(s);
});

For ExpressJs router:

router.post('/login', async(req, res) => {
    return res.send({redirect: '/yoururl'});
})

Client-side:

    success: function (response) {
        if (response.redirect) {
            window.location = response.redirect
        }
    },

I would recommend that you don't. Do you really want to have a class that is dependent on how the text editing is implemented in the form, or do you want a mechanism allowing you to get and set the text?

I would suggest the latter. So in your form, create a property that wraps the Text property of the TextBox control in question:

public string FirstName
{
    get { return firstNameTextBox.Text; }
    set { firstNameTextBox.Text = value; }
}

Next, create some mechanism through which you class can get a reference to the form (through the contructor for instance). Then that class can use the property to access and modify the text:

class SomeClass
{
    private readonly YourFormClass form;
    public SomeClass(YourFormClass form)
    {
        this.form = form;
    }

    private void SomeMethodDoingStuffWithText()
    {
        string firstName = form.FirstName;
        form.FirstName = "some name";
    }
}

An even better solution would be to define the possible interactions in an interface, and let that interface be the contract between your form and the other class. That way the class is completely decoupled from the form, and can use anyting implementing the interface (which opens the door for far easier testing):

interface IYourForm
{
    string FirstName { get; set; }
}

In your form class:

class YourFormClass : Form, IYourForm
{
    // lots of other code here

    public string FirstName
    {
        get { return firstNameTextBox.Text; }
        set { firstNameTextBox.Text = value; }
    }
}

...and the class:

class SomeClass
{
    private readonly IYourForm form;
    public SomeClass(IYourForm form)
    {
        this.form = form;
    }

    // and so on

}

$('option:selected', 'select').removeAttr('selected').next('option').attr('selected', 'selected');

Check out working code here http://jsbin.com/ipewe/edit

I liked this solution on GitHub.

It is a single hpp file and it uses the vector<byte> type for raw data unlike the accepted answer.

#pragma once

#include <string>
#include <vector>
#include <stdexcept>
#include <cstdint>

namespace base64
{
    inline static const char kEncodeLookup[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
    inline static const char kPadCharacter = '=';

    using byte = std::uint8_t;

    inline std::string encode(const std::vector<byte>& input)
    {
        std::string encoded;
        encoded.reserve(((input.size() / 3) + (input.size() % 3 > 0)) * 4);

        std::uint32_t temp{};
        auto it = input.begin();

        for(std::size_t i = 0; i < input.size() / 3; ++i)
        {
            temp  = (*it++) << 16;
            temp += (*it++) << 8;
            temp += (*it++);
            encoded.append(1, kEncodeLookup[(temp & 0x00FC0000) >> 18]);
            encoded.append(1, kEncodeLookup[(temp & 0x0003F000) >> 12]);
            encoded.append(1, kEncodeLookup[(temp & 0x00000FC0) >> 6 ]);
            encoded.append(1, kEncodeLookup[(temp & 0x0000003F)      ]);
        }

        switch(input.size() % 3)
        {
        case 1:
            temp = (*it++) << 16;
            encoded.append(1, kEncodeLookup[(temp & 0x00FC0000) >> 18]);
            encoded.append(1, kEncodeLookup[(temp & 0x0003F000) >> 12]);
            encoded.append(2, kPadCharacter);
            break;
        case 2:
            temp  = (*it++) << 16;
            temp += (*it++) << 8;
            encoded.append(1, kEncodeLookup[(temp & 0x00FC0000) >> 18]);
            encoded.append(1, kEncodeLookup[(temp & 0x0003F000) >> 12]);
            encoded.append(1, kEncodeLookup[(temp & 0x00000FC0) >> 6 ]);
            encoded.append(1, kPadCharacter);
            break;
        }

        return encoded;
    }

    std::vector<byte> decode(const std::string& input)
    {
        if(input.length() % 4)
            throw std::runtime_error("Invalid base64 length!");

        std::size_t padding{};

        if(input.length())
        {
            if(input[input.length() - 1] == kPadCharacter) padding++;
            if(input[input.length() - 2] == kPadCharacter) padding++;
        }

        std::vector<byte> decoded;
        decoded.reserve(((input.length() / 4) * 3) - padding);

        std::uint32_t temp{};
        auto it = input.begin();

        while(it < input.end())
        {
            for(std::size_t i = 0; i < 4; ++i)
            {
                temp <<= 6;
                if     (*it >= 0x41 && *it <= 0x5A) temp |= *it - 0x41;
                else if(*it >= 0x61 && *it <= 0x7A) temp |= *it - 0x47;
                else if(*it >= 0x30 && *it <= 0x39) temp |= *it + 0x04;
                else if(*it == 0x2B)                temp |= 0x3E;
                else if(*it == 0x2F)                temp |= 0x3F;
                else if(*it == kPadCharacter)
                {
                    switch(input.end() - it)
                    {
                    case 1:
                        decoded.push_back((temp >> 16) & 0x000000FF);
                        decoded.push_back((temp >> 8 ) & 0x000000FF);
                        return decoded;
                    case 2:
                        decoded.push_back((temp >> 10) & 0x000000FF);
                        return decoded;
                    default:
                        throw std::runtime_error("Invalid padding in base64!");
                    }
                }
                else throw std::runtime_error("Invalid character in base64!");

                ++it;
            }

            decoded.push_back((temp >> 16) & 0x000000FF);
            decoded.push_back((temp >> 8 ) & 0x000000FF);
            decoded.push_back((temp      ) & 0x000000FF);
        }

        return decoded;
    }
}

Unless you are writing very small files, you should probably use templates.

Example:

- name: copy upstart script
  template: 
    src: myCompany-service.conf.j2 
    dest: "/etc/init/myCompany-service.conf"

It seems like what you're looking for is a variant on the CSS Holy Grail Layout, but in two columns. Check out the resources at this answer for more information.

I have run into the same problem as w00, but I didn't had the freedom to rewrite the base functionality of the component in which this problem (E_NOTICE) occured. I've been able to fix the issue using an ArrayObject in stead of the basic type array(). This will return an object, which will defaulty be returned by reference.

Linux:

mvn validate clean install | egrep -v "(^\[INFO\])"

or

mvn validate clean install | egrep -v "(^\[INFO\]|^\[DEBUG\])"

Windows:

mvn validate clean install | findstr /V /R "^\[INFO\] ^\[DEBUG\]"

It is possible that the executable is statically linked and that is why ldd gzip does not see any links - because it isn't. I don't know much about things that far back so I don't know if there would be incompatibilities if libraries are linked in statically. I might expect there to be.

I know it's the most obvious thing going and I'm sure you've done it, but chmod +x ./gzip, yes? No such file or directory is a classic symptom of that not being done, that's why I mention it.

Just need to try this:

string smtpAddress = "smtp.gmail.com";
int portNumber = 587;
bool enableSSL = true;
string emailFrom = "companyemail";
string password = "password";
string emailTo = "Your email";
string subject = "Hello!";
string body = "Hello, Mr.";
MailMessage mail = new MailMessage();
mail.From = new MailAddress(emailFrom);
mail.To.Add(emailTo);
mail.Subject = subject;
mail.Body = body;
mail.IsBodyHtml = true;
using (SmtpClient smtp = new SmtpClient(smtpAddress, portNumber))
{
   smtp.Credentials = new NetworkCredential(emailFrom, password);
   smtp.EnableSsl = enableSSL;
   smtp.Send(mail);
}

1. Download say, go1.6beta1.linux-amd64.tar.gz from https://golang.org/dl/ into /tmp

wget https://storage.googleapis.com/golang/go1.6beta1.linux-amd64.tar.gz -o /tmp/go1.6beta1.linux-amd64.tar.gz

2. un-tar into /usr/local/bin

sudo tar -zxvf go1.6beta1.linux-amd64.tar.gz -C /usr/local/bin/

3. Set GOROOT, GOPATH, [on ubuntu add following to ~/.bashrc]

mkdir ~/go export GOPATH=~/go export PATH=$PATH:$GOPATH/bin export GOROOT=/usr/local/bin/go export PATH=$PATH:$GOROOT/bin

4. Verify

go version should show be

go version go1.6beta1 linux/amd64

go env should show be

GOARCH="amd64" GOBIN="" GOEXE="" GOHOSTARCH="amd64" GOHOSTOS="linux" GOOS="linux" GOPATH="/home/vats/go" GORACE="" GOROOT="/usr/local/bin/go" GOTOOLDIR="/usr/local/bin/go/pkg/tool/linux_amd64" GO15VENDOREXPERIMENT="1" CC="gcc" GOGCCFLAGS="-fPIC -m64 -pthread -fmessage-length=0" CXX="g++" CGO_ENABLED="1"

I use this code and RUN SUCCESS FULL:

$filename = 'apptoko-2016-12-23.sql'; //change to ur .sql file
                            $handle = fopen($filename, "r+");
                            $contents = fread($handle, filesize($filename));

                            $sql = explode(";",$contents);// 
                            foreach($sql as $query){
                                $result=mysql_query($query);
                                if ($result){
                                 echo '<tr><td><BR></td></tr>';
                                 echo '<tr><td>' . $query . ' <b>SUCCESS</b></td></tr>';
                                 echo '<tr><td><BR></td></tr>';
                                }
                            }
                            fclose($handle);

I will show you 2 ways to accomplish what you want:

First way: Decorate your field with JsonProperty attribute in order to skip the serialization of that field if it is null.

public class Foo
{
    public int Id { get; set; }
    public string Name { get; set; }

    [JsonProperty(NullValueHandling = NullValueHandling.Ignore)]
    public List<Something> Somethings { get; set; }
}

Second way: If you are negotiation with some complex scenarios then you could use the Web Api convention ("ShouldSerialize") in order to skip serialization of that field depending of some specific logic.

public class Foo
{
    public int Id { get; set; }
    public string Name { get; set; }

    public List<Something> Somethings { get; set; }

    public bool ShouldSerializeSomethings() {
         var resultOfSomeLogic = false;
         return resultOfSomeLogic; 
    }
}

WebApi uses JSON.Net and it use reflection to serialization so when it has detected (for instance) the ShouldSerializeFieldX() method the field with name FieldX will not be serialized.

As I think, It's not best way to using UIGestureRecognizer-based cells.

First, you'll not have any options to use CoreGraphics.

Perfect solution, will UIResponder or one UIGestureRecognizer for whole table view. Not for every UITableViewCell. It will make you app stuck.

Just to add this to the list:

Uri.EscapeUriString("Hi there+Hello there") // Hi%20there+Hello%20there
Uri.EscapeDataString("Hi there+Hello there") // Hi%20there%2BHello%20there

See https://stackoverflow.com/a/34189188/98491

Usually you want to use EscapeDataString which does it right.

System.IO.Stream stream = new System.IO.MemoryStream();

if (strpos($string, $word) === FALSE) {
   ... not found ...
}

Note that strpos() is case sensitive, if you want a case-insensitive search, use stripos() instead.

Also note the ===, forcing a strict equality test. strpos CAN return a valid 0 if the 'needle' string is at the start of the 'haystack'. By forcing a check for an actual boolean false (aka 0), you eliminate that false positive.

To run Minecraft with Forge (change C:\Users\nov11\AppData\Roaming/.minecraft/to your MineCraft path :) [Just for people who are a bit too lazy to search on Google...] Special thanks to ammarx for his TagAPI_3 (Github) which was used to create this command. Arguments are separated line by line to make it easier to find useful ones.

java
-Xms1024M
-Xmx1024M
-XX:HeapDumpPath=MojangTricksIntelDriversForPerformance_javaw.exe_minecraft.exe.heapdump
-Djava.library.path=C:\Users\nov11\AppData\Roaming/.minecraft/versions/1.12.2/natives
-cp
C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/minecraftforge/forge/1.12.2-14.23.5.2775/forge-1.12.2-14.23.5.2775.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/minecraft/launchwrapper/1.12/launchwrapper-1.12.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/ow2/asm/asm-all/5.2/asm-all-5.2.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/jline/jline/3.5.1/jline-3.5.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/java/dev/jna/jna/4.4.0/jna-4.4.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/typesafe/akka/akka-actor_2.11/2.3.3/akka-actor_2.11-2.3.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/typesafe/config/1.2.1/config-1.2.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/scala-actors-migration_2.11/1.1.0/scala-actors-migration_2.11-1.1.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/scala-compiler/2.11.1/scala-compiler-2.11.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/plugins/scala-continuations-library_2.11/1.0.2/scala-continuations-library_2.11-1.0.2.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/plugins/scala-continuations-plugin_2.11.1/1.0.2/scala-continuations-plugin_2.11.1-1.0.2.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/scala-library/2.11.1/scala-library-2.11.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/scala-parser-combinators_2.11/1.0.1/scala-parser-combinators_2.11-1.0.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/scala-reflect/2.11.1/scala-reflect-2.11.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/scala-swing_2.11/1.0.1/scala-swing_2.11-1.0.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/scala-lang/scala-xml_2.11/1.0.2/scala-xml_2.11-1.0.2.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/lzma/lzma/0.0.1/lzma-0.0.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/sf/jopt-simple/jopt-simple/5.0.3/jopt-simple-5.0.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/java3d/vecmath/1.5.2/vecmath-1.5.2.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/sf/trove4j/trove4j/3.0.3/trove4j-3.0.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/apache/maven/maven-artifact/3.5.3/maven-artifact-3.5.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/mojang/patchy/1.1/patchy-1.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/oshi-project/oshi-core/1.1/oshi-core-1.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/java/dev/jna/jna/4.4.0/jna-4.4.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/java/dev/jna/platform/3.4.0/platform-3.4.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/ibm/icu/icu4j-core-mojang/51.2/icu4j-core-mojang-51.2.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/sf/jopt-simple/jopt-simple/5.0.3/jopt-simple-5.0.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/paulscode/codecjorbis/20101023/codecjorbis-20101023.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/paulscode/codecwav/20101023/codecwav-20101023.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/paulscode/libraryjavasound/20101123/libraryjavasound-20101123.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/paulscode/librarylwjglopenal/20100824/librarylwjglopenal-20100824.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/paulscode/soundsystem/20120107/soundsystem-20120107.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/io/netty/netty-all/4.1.9.Final/netty-all-4.1.9.Final.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/google/guava/guava/21.0/guava-21.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/apache/commons/commons-lang3/3.5/commons-lang3-3.5.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/commons-io/commons-io/2.5/commons-io-2.5.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/commons-codec/commons-codec/1.10/commons-codec-1.10.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/java/jinput/jinput/2.0.5/jinput-2.0.5.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/net/java/jutils/jutils/1.0.0/jutils-1.0.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/google/code/gson/gson/2.8.0/gson-2.8.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/mojang/authlib/1.5.25/authlib-1.5.25.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/mojang/realms/1.10.22/realms-1.10.22.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/apache/commons/commons-compress/1.8.1/commons-compress-1.8.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/apache/httpcomponents/httpclient/4.3.3/httpclient-4.3.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/commons-logging/commons-logging/1.1.3/commons-logging-1.1.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/apache/httpcomponents/httpcore/4.3.2/httpcore-4.3.2.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/it/unimi/dsi/fastutil/7.1.0/fastutil-7.1.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/apache/logging/log4j/log4j-api/2.8.1/log4j-api-2.8.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/apache/logging/log4j/log4j-core/2.8.1/log4j-core-2.8.1.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/lwjgl/lwjgl/lwjgl/2.9.4-nightly-20150209/lwjgl-2.9.4-nightly-20150209.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/lwjgl/lwjgl/lwjgl_util/2.9.4-nightly-20150209/lwjgl_util-2.9.4-nightly-20150209.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/lwjgl/lwjgl/lwjgl-platform/2.9.4-nightly-20150209/lwjgl-platform-2.9.4-nightly-20150209.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/lwjgl/lwjgl/lwjgl/2.9.2-nightly-20140822/lwjgl-2.9.2-nightly-20140822.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/org/lwjgl/lwjgl/lwjgl_util/2.9.2-nightly-20140822/lwjgl_util-2.9.2-nightly-20140822.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/mojang/text2speech/1.10.3/text2speech-1.10.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/com/mojang/text2speech/1.10.3/text2speech-1.10.3.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/ca/weblite/java-objc-bridge/1.0.0/java-objc-bridge-1.0.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/libraries/ca/weblite/java-objc-bridge/1.0.0/java-objc-bridge-1.0.0.jar;C:\Users\nov11\AppData\Roaming/.minecraft/versions/1.12.2/1.12.2.jar
net.minecraft.launchwrapper.Launch
--width
854
--height
480
--username
Ishikawa
--version
1.12.2-forge1.12.2-14.23.5.2775
--gameDir
C:\Users\nov11\AppData\Roaming/.minecraft
--assetsDir
C:\Users\nov11\AppData\Roaming/.minecraft/assets
--assetIndex
1.12
--uuid
N/A
--accessToken
aeef7bc935f9420eb6314dea7ad7e1e5
--userType
mojang
--tweakClass
net.minecraftforge.fml.common.launcher.FMLTweaker
--versionType
Forge

Just when other solutions don't work. accessToken and uuid can be acquired from Mojang Servers, check other anwsers for details.

Edit (26.11.2018): I've also created Launcher Framework in C# (.NET Framework 3.5), which you can also check to see how launcher should work Available Here

Apache Tomcat is used to deploy your Java Servlets and JSPs. So in your Java project you can build your WAR (short for Web ARchive) file, and just drop it in the deploy directory in Tomcat.

So basically Apache is an HTTP Server, serving HTTP. Tomcat is a Servlet and JSP Server serving Java technologies.

Tomcat includes Catalina, which is a servlet container. A servlet, at the end, is a Java class. JSP files (which are similar to PHP, and older ASP files) are generated into Java code (HttpServlet), which is then compiled to .class files by the server and executed by the Java virtual machine.

Those who want to achieve the same in new versions of Angular.

Grab textArea elementRef.

@ViewChild('textArea', { read: ElementRef }) textArea: ElementRef;

public autoShrinkGrow() {
    textArea.style.overflow = 'hidden';
    textArea.style.height = '0px';
    textArea.style.height = textArea.scrollHeight + 'px';
}

<textarea (keyup)="autoGrow()" #textArea></textarea>

I am also adding another use case that may come handy some users reading the thread, when user want to increase the height of text-area to certain height and then have overflow:scroll on it, above method can be extended to achieve the mentioned use-case.

  public autoGrowShrinkToCertainHeight() {
    const textArea = this.textArea.nativeElement;
    if (textArea.scrollHeight > 77) {
      textArea.style.overflow = 'auto';
      return;
    }
    else {
      textArea.style.overflow = 'hidden';
      textArea.style.height = '0px';
      textArea.style.height = textArea.scrollHeight + 'px';
    }
  }

If you need to handle DOM events not already provided by React you have to add DOM listeners after the component is mounted:

Update: Between React 13, 14, and 15 changes were made to the API that affect my answer. Below is the latest way using React 15 and ES7. See answer history for older versions.

class MovieItem extends React.Component {

  componentDidMount() {
    // When the component is mounted, add your DOM listener to the "nv" elem.
    // (The "nv" elem is assigned in the render function.)
    this.nv.addEventListener("nv-enter", this.handleNvEnter);
  }

  componentWillUnmount() {
    // Make sure to remove the DOM listener when the component is unmounted.
    this.nv.removeEventListener("nv-enter", this.handleNvEnter);
  }

  // Use a class arrow function (ES7) for the handler. In ES6 you could bind()
  // a handler in the constructor.
  handleNvEnter = (event) => {
    console.log("Nv Enter:", event);
  }

  render() {
    // Here we render a single <div> and toggle the "aria-nv-el-current" attribute
    // using the attribute spread operator. This way only a single <div>
    // is ever mounted and we don't have to worry about adding/removing
    // a DOM listener every time the current index changes. The attrs 
    // are "spread" onto the <div> in the render function: {...attrs}
    const attrs = this.props.index === 0 ? {"aria-nv-el-current": true} : {};

    // Finally, render the div using a "ref" callback which assigns the mounted 
    // elem to a class property "nv" used to add the DOM listener to.
    return (
      <div ref={elem => this.nv = elem} aria-nv-el {...attrs} className="menu_item nv-default">
        ...
      </div>
    );
  }

}

Example on Codepen.io

Override the onBackPressed method and do nothing if you meant to handle the back button on the device.

@Override
public void onBackPressed() {
   if (shouldAllowBack()) {
       super.onBackPressed();
   } else {
       doSomething();
   }
}

As already said, on runtime there is no difference (in the class file it is always fully qualified, and after loading and linking the class there are direct pointers to the referred method), and everything in the java.lang package is automatically imported, as is everything in the current package.

The compiler might have to search some microseconds longer, but this should not be a reason - decide for legibility for human readers.

By the way, if you are using lots of static methods (from Math, for example), you could also write

import static java.lang.Math.*;

and then use

sqrt(x)

directly. But only do this if your class is math heavy and it really helps legibility of bigger formulas, since the reader (as the compiler) first would search in the same class and maybe in superclasses, too. (This applies analogously for other static methods and static variables (or constants), too.)

numpy.array is a function that returns a numpy.ndarray. There is no object type numpy.array.

Could it be as simple as enclosing your asset in " " and whatever needs quotes on the inside with ' '?

<link rel="stylesheet" media="screen" href="@routes.Assets.at("stylesheets/main.css")">

becomes

<link rel="stylesheet" media="screen" href="@routes.Assets.at('stylesheets/main.css')">

That could be causing some problems with parsing

It works on firefox, if you change onClick() to click() in javascript part.

$("img.foo").click(function()_x000D_
{_x000D_
    // Get the src of the image_x000D_
    var src = $(this).attr("src");_x000D_
_x000D_
    // Send Ajax request to backend.php, with src set as "img" in the POST data_x000D_
    $.post("/backend.php", {"img": src});_x000D_
});

You can use either sbt or maven to compile spark programs. Simply add the spark as dependency to maven

<repository>
      <id>Spark repository</id>
      <url>http://www.sparkjava.com/nexus/content/repositories/spark/</url>
</repository>

And then the dependency:

<dependency>
      <groupId>spark</groupId>
      <artifactId>spark</artifactId>
      <version>1.2.0</version>
</dependency>

In terms of running a file with spark commands: you can simply do this:

echo"
   import org.apache.spark.sql.*
   ssc = new SQLContext(sc)
   ssc.sql("select * from mytable").collect
" > spark.input

Now run the commands script:

cat spark.input | spark-shell

php artisan config:clear   

(NOT cache)

From the documentation for strtotime():

Dates in the m/d/y or d-m-y formats are disambiguated by looking at the separator between the various components: if the separator is a slash (/), then the American m/d/y is assumed; whereas if the separator is a dash (-) or a dot (.), then the European d-m-y format is assumed.

In your date string, you have 12-16-2013. 16 isn't a valid month, and hence strtotime() returns false.

Since you can't use DateTime class, you could manually replace the - with / using str_replace() to convert the date string into a format that strtotime() understands:

$date = '2-16-2013';
echo date('Y-m-d', strtotime(str_replace('-','/', $date))); // => 2013-02-16

Your code experiences a case where the Automatic Semicolon Insertion (ASI) process doesn't happen.

You should never rely on ASI. You should use semicolons to properly separate statements:

var postTypes = new Array('hello', 'there'); // <--- Place a semicolon here!!

(function() { alert('hello there') })();

Your code was actually trying to invoke the array object.

Try setting:

android:indeterminateDrawable="@drawable/progress" 

It worked for me. Here is also the code for progress.xml:

<?xml version="1.0" encoding="utf-8"?>
<rotate xmlns:android="http://schemas.android.com/apk/res/android"
    android:pivotX="50%" android:pivotY="50%" android:fromDegrees="0"
    android:toDegrees="360">

    <shape android:shape="ring" android:innerRadiusRatio="3"
        android:thicknessRatio="8" android:useLevel="false">

        <size android:width="48dip" android:height="48dip" />

        <gradient android:type="sweep" android:useLevel="false"
            android:startColor="#4c737373" android:centerColor="#4c737373"
            android:centerY="0.50" android:endColor="#ffffd300" />

    </shape>

</rotate> 

Or you could just perform a trim() on the string to handle the case when people use spaces instead of tabs (unless you are reading makefiles)

Key input is a predefined event. You can catch events by attaching event_sequence(s) to event_handle(s) by using one or multiple of the existing binding methods(bind, bind_class, tag_bind, bind_all). In order to do that:

1. define an event_handle method
2. pick an event(event_sequence) that fits your case from an events list

When an event happens, all of those binding methods implicitly calls the event_handle method while passing an Event object, which includes information about specifics of the event that happened, as the argument.

In order to detect the key input, one could first catch all the '<KeyPress>' or '<KeyRelease>' events and then find out the particular key used by making use of event.keysym attribute.

Below is an example using bind to catch both '<KeyPress>' and '<KeyRelease>' events on a particular widget(root):

try:                        # In order to be able to import tkinter for
    import tkinter as tk    # either in python 2 or in python 3
except ImportError:
    import Tkinter as tk


def event_handle(event):
    # Replace the window's title with event.type: input key
    root.title("{}: {}".format(str(event.type), event.keysym))


if __name__ == '__main__':
    root = tk.Tk()
    event_sequence = '<KeyPress>'
    root.bind(event_sequence, event_handle)
    root.bind('<KeyRelease>', event_handle)
    root.mainloop()

For Windows 10 with Anaconda 4.4 Python 3.6:

1st step) conda create -n tensorflow python=3.6

2nd step) activate tensorflow

3rd step) pip3 install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.2.1-cp36-cp36m-win_amd64.whl

class Program
{
    static void Main(string[] args)
    {
        a a1 = new b();  
        a1.print();  
    }
}
class a
{
    public a()
    {
        Console.WriteLine("base class object initiated");
    }
    public void print()
    {
        Console.WriteLine("base");
    }
}
class b:a
{
    public b()
    {
        Console.WriteLine("child class object");
    }
    public void print1()
    {
        Console.WriteLine("derived");
    }
}

}

when we create a child class object,the base class object is auto initiated so base class reference variable can point to child class object.

but not vice versa because a child class reference variable can not point to base class object because no child class object is created.

and also notice that base class reference variable can only call base class member.

It's now builtin in MySQL 8.0 and MariaDB 10.2:

SELECT
  itemID, COUNT(*) as ordercount,
  ROW_NUMBER OVER (PARTITION BY itemID ORDER BY rank DESC) as rank
FROM orders
GROUP BY itemID ORDER BY rank DESC

Basically the zip function works on lists, tuples and dictionaries in Python. If you are using IPython then just type zip? And check what zip() is about.

If you are not using IPython then just install it: "pip install ipython"

For lists

a = ['a', 'b', 'c']
b = ['p', 'q', 'r']
zip(a, b)

The output is [('a', 'p'), ('b', 'q'), ('c', 'r')

For dictionary:

c = {'gaurav':'waghs', 'nilesh':'kashid', 'ramesh':'sawant', 'anu':'raje'}
d = {'amit':'wagh', 'swapnil':'dalavi', 'anish':'mane', 'raghu':'rokda'}
zip(c, d)

The output is:

[('gaurav', 'amit'),
 ('nilesh', 'swapnil'),
 ('ramesh', 'anish'),
 ('anu', 'raghu')]

I know it's too late but may be its helps some one. on using this take your database offline

ALTER DATABASE dbname SET OFFLINE

This answer comes from @webology on Twitter:

$ sudo apt-get install python-setuptools
$ sudo easy_install pip
$ sudo pip install --upgrade pip virtualenv virtualenvwrapper

My added notes:

• On Mac/Windows (and Linux if the apt repo is outdated) you'd replace the first step with downloading setuptools from http://pypi.python.org/pypi/setuptools
• On Windows you'd have to omit virtualenvwrapper from the last step and install it manually somehow. I don't know if there's a way to do this without Cygwin, but I hope so.

Directly use df.fillna(df.mean()) to fill all the null value with mean

If you want to fill null value with mean of that column then you can use this

suppose x=df['Item_Weight'] here Item_Weight is column name

here we are assigning (fill null values of x with mean of x into x)

df['Item_Weight'] = df['Item_Weight'].fillna((df['Item_Weight'].mean()))

If you want to fill null value with some string then use

here Outlet_size is column name

df.Outlet_Size = df.Outlet_Size.fillna('Missing')

The problem, as stated in your logs, is 2 dependencies trying to use different versions of 3rd dependency. Add one of the following to the app-gradle file:

androidTestCompile 'com.google.code.findbugs:jsr305:2.0.1'
androidTestCompile 'com.google.code.findbugs:jsr305:1.3.9'

I was not satisfied with any of these answers. max always picks the first key with the max value. The dictionary could have multiple keys with that value.

def keys_with_top_values(my_dict):
    return [key  for (key, value) in my_dict.items() if value == max(my_dict.values())]

Posting this answer in case it helps someone out. See the below SO post

Which maximum does Python pick in the case of a tie?

jQuery.load()

$('#summary').load('ajax.php', function() {
  alert('Loaded.');
});

I could not understand those 3 rules in the specs too well -- hope to have something that is more plain English -- but here is what I gathered from JavaScript: The Definitive Guide, 6th Edition, David Flanagan, O'Reilly, 2011:

Quote:

JavaScript does not treat every line break as a semicolon: it usually treats line breaks as semicolons only if it can’t parse the code without the semicolons.

Another quote: for the code

var a
a
=
3 console.log(a)

JavaScript does not treat the second line break as a semicolon because it can continue parsing the longer statement a = 3;

and:

two exceptions to the general rule that JavaScript interprets line breaks as semicolons when it cannot parse the second line as a continuation of the statement on the first line. The first exception involves the return, break, and continue statements

... If a line break appears after any of these words ... JavaScript will always interpret that line break as a semicolon.

... The second exception involves the ++ and -- operators ... If you want to use either of these operators as postfix operators, they must appear on the same line as the expression they apply to. Otherwise, the line break will be treated as a semicolon, and the ++ or -- will be parsed as a prefix operator applied to the code that follows. Consider this code, for example:

x 
++ 
y

It is parsed as x; ++y;, not as x++; y

So I think to simplify it, that means:

In general, JavaScript will treat it as continuation of code as long as it makes sense -- except 2 cases: (1) after some keywords like return, break, continue, and (2) if it sees ++ or -- on a new line, then it will add the ; at the end of the previous line.

The part about "treat it as continuation of code as long as it makes sense" makes it feel like regular expression's greedy matching.

With the above said, that means for return with a line break, the JavaScript interpreter will insert a ;

(quoted again: If a line break appears after any of these words [such as return] ... JavaScript will always interpret that line break as a semicolon)

and due to this reason, the classic example of

return
{ 
  foo: 1
}

will not work as expected, because the JavaScript interpreter will treat it as:

return;   // returning nothing
{
  foo: 1
}

There has to be no line-break immediately after the return:

return { 
  foo: 1
}

for it to work properly. And you may insert a ; yourself if you were to follow the rule of using a ; after any statement:

return { 
  foo: 1
};

With the recent release of bootstrap 3, and the glyphicons being merged back to the main Bootstrap repo, Bootstrap CDN is now serving the complete Bootstrap 3.0 css including Glyphicons. The Bootstrap css reference is all you need to include: Glyphicons and its dependencies are on relative paths on the CDN site and are referenced in bootstrap.min.css.

In html:

<link href="//netdna.bootstrapcdn.com/bootstrap/3.0.0/css/bootstrap.min.css" rel="stylesheet">

In css:

 @import url("//netdna.bootstrapcdn.com/bootstrap/3.0.0/css/bootstrap.min.css");

Here is a working demo.

Note that you have to use .glyphicon classes instead of .icon:

Example:

<span class="glyphicon glyphicon-heart"></span>

Also note that you would still need to include bootstrap.min.js for usage of Bootstrap JavaScript components, see Bootstrap CDN for url.

If you want to use the Glyphicons separately, you can do that by directly referencing the Glyphicons css on Bootstrap CDN.

In html:

<link href="//netdna.bootstrapcdn.com/bootstrap/3.0.0/css/bootstrap-glyphicons.css" rel="stylesheet">

In css:

@import url("//netdna.bootstrapcdn.com/bootstrap/3.0.0/css/bootstrap-glyphicons.css");

Since the css file already includes all the needed Glyphicons dependencies (which are in a relative path on the Bootstrap CDN site), adding the css file is all there is to do to start using Glyphicons.

Here is a working demo of the Glyphicons without Bootstrap.

Plain vanilla JDBC does not support named parameters.

If you are using DB2 then using DB2 classes directly:

1. Using named parameter markers with PreparedStatement objects
2. Using named parameter markers with CallableStatement objects

You can add comments to the end of a batch file with this syntax:

@echo off
:: Start of code
...
:: End of code

(I am a comment
So I am!
This can be only at the end of batch files

Just make sure you never use a closing parentheses.

Attributions: Leo Guttirez Ramirez on https://www.robvanderwoude.com/comments.php

No, they are not always.

It depends on whether you allow user input to be placed within the query itself. For example:

$dbh = new PDO("blahblah");

$tableToUse = $_GET['userTable'];

$stmt = $dbh->prepare('SELECT * FROM ' . $tableToUse . ' where username = :username');
$stmt->execute( array(':username' => $_REQUEST['username']) );

would be vulnerable to SQL injections and using prepared statements in this example won't work, because the user input is used as an identifier, not as data. The right answer here would be to use some sort of filtering/validation like:

$dbh = new PDO("blahblah");

$tableToUse = $_GET['userTable'];
$allowedTables = array('users','admins','moderators');
if (!in_array($tableToUse,$allowedTables))    
 $tableToUse = 'users';

$stmt = $dbh->prepare('SELECT * FROM ' . $tableToUse . ' where username = :username');
$stmt->execute( array(':username' => $_REQUEST['username']) );

Note: you can't use PDO to bind data that goes outside of DDL (Data Definition Language), i.e. this does not work:

$stmt = $dbh->prepare('SELECT * FROM foo ORDER BY :userSuppliedData');

The reason why the above does not work is because DESC and ASC are not data. PDO can only escape for data. Secondly, you can't even put ' quotes around it. The only way to allow user chosen sorting is to manually filter and check that it's either DESC or ASC.

Well you could directly substract from the value by just referencing the key. Which in my opinion is simpler.

>>> books = {}
>>> books['book'] = 3       
>>> books['book'] -= 1   
>>> books   
{'book': 2}   

In your case:

book_shop[ch1] -= 1

If you want to change the table default character set and all character columns to a new character set, use a statement like this:

ALTER TABLE tbl_name CONVERT TO CHARACTER SET charset_name;

So query will be:

ALTER TABLE etape_prospection CONVERT TO CHARACTER SET utf8;

Run cmd and then run node server.js. In your example, you are trying to use the REPL to run your command, which is not going to work. The ellipsis is node.js expecting more tokens before closing the current scope (you can type code in and run it on the fly here)

Writing the properties file with multiple comments is not supported. Why ?

PropertyFile.java

public class PropertyFile extends Task {

    /* ========================================================================
     *
     * Instance variables.
     */

    // Use this to prepend a message to the properties file
    private String              comment;

    private Properties          properties;

The ant property file task is backed by a java.util.Properties class which stores comments using the store() method. Only one comment is taken from the task and that is passed on to the Properties class to save into the file.

The way to get around this is to write your own task that is backed by commons properties instead of java.util.Properties. The commons properties file is backed by a property layout which allows settings comments for individual keys in the properties file. Save the properties file with the save() method and modify the new task to accept multiple comments through <comment> elements.

Officially, the SQL languages does not support a JOIN or FROM clause in an UPDATE statement unless it is in a subquery. Thus, the Hoyle ANSI approach would be something like

Update addresses
Set cid = (
            Select c.id
            From customers As c
            where c.id = a.id
            )
Where Exists    (
                Select 1
                From customers As C1
                Where C1.id = addresses.id
                )

However many DBMSs such Postgres support the use of a FROM clause in an UPDATE statement. In many cases, you are required to include the updating table and alias it in the FROM clause however I'm not sure about Postgres:

Update addresses
Set cid = c.id
From addresses As a
    Join customers As c
        On c.id = a.id

I test examples in js. Simplest solution - just add word u need inside / /:

var reg = /cat/;
reg.test('some cat here');//1 test
true // result
reg.test('acatb');//2 test
true // result

Now if u need this specific word with boundaries, not inside any other signs-letters. We use b marker:

var reg = /\bcat\b/
reg.test('acatb');//1 test 
false // result
reg.test('have cat here');//2 test
true // result

We have also exec() method in js, whichone returns object-result. It helps f.g. to get info about place/index of our word.

var matchResult = /\bcat\b/.exec("good cat good");
console.log(matchResult.index); // 5

If we need get all matched words in string/sentence/text, we can use g modifier (global match):

"cat good cat good cat".match(/\bcat\b/g).length
// 3 

Now the last one - i need not 1 specific word, but some of them. We use | sign, it means choice/or.

"bad dog bad".match(/\bcat|dog\b/g).length
// 1

1. Set var step=1 as global variable by putting it above the function call
2. put semicolons

It will look like this

<head>
<script type="text/javascript">
var image1 = new Image()
image1.src = "images/pentagg.jpg"
var image2 = new Image()
image2.src = "images/promo.jpg"
</script>
</head>
<body>
<p><img src="images/pentagg.jpg" width="500" height="300" name="slide" /></p>
<script type="text/javascript">
        var step=1;
        function slideit()
        {
            document.images.slide.src = eval("image"+step+".src");
            if(step<2)
                step++;
            else
                step=1;
            setTimeout("slideit()",2500);
        }
        slideit();
</script>
</body>

Server.UrlDecode(xxxxxxxx)

• OR is spelled should
• AND is spelled must
• NOR is spelled should_not

Example:

You want to see all the items that are (round AND (red OR blue)):

{
    "query": {
        "bool": {
            "must": [
                {
                    "term": {"shape": "round"}
                },
                {
                    "bool": {
                        "should": [
                            {"term": {"color": "red"}},
                            {"term": {"color": "blue"}}
                        ]
                    }
                }
            ]
        }
    }
}

You can also do more complex versions of OR, for example if you want to match at least 3 out of 5, you can specify 5 options under "should" and set a "minimum_should" of 3.

Thanks to Glen Thompson and Sebastialonso for finding where my nesting wasn't quite right before.

Thanks also to Fatmajk for pointing out that "term" becomes "match" in ElasticSearch 6.

this works

 final StringWriter sw = new StringWriter();

try {
    TransformerFactory.newInstance().newTransformer().transform(
        new DOMSource(soapResponse.getSOAPPart()),
        new StreamResult(sw));
} catch (TransformerException e) {
    throw new RuntimeException(e);
}
System.out.println(sw.toString());
return sw.toString();

$(document).ready(function() {
  //...
//clear on focus
$('.input').focus(function() {
    $('.input').val("");
});
   //clear when submitted
$('.button').click(function() {
    $('.input').val("");
});

});

Only learning myself, but wrapping in a View may allow you to add styles around the button.

const Stack = StackNavigator({
  Home: {
    screen: HomeView,
    navigationOptions: {
      title: 'Home View'
    }
  },
  CoolView: {
    screen: CoolView,
    navigationOptions: ({navigation}) => ({
      title: 'Cool View',
      headerRight: (<View style={{marginRight: 16}}><Button
        title="Cool"
        onPress={() => alert('cool')}
      /></View>
    )
    })
  }
})

What you do here is called a JOIN (although you do it implicitly because you select from multiple tables). This means, if you didn't put any conditions in your WHERE clause, you had all combinations of those tables. Only with your condition you restrict your join to those rows where the drink id matches.

But there are still X multiple rows in the result for every drink, if there are X photos with this particular drinks_id. Your statement doesn't restrict which photo(s) you want to have!

If you only want one row per drink, you have to tell SQL what you want to do if there are multiple rows with a particular drinks_id. For this you need grouping and an aggregate function. You tell SQL which entries you want to group together (for example all equal drinks_ids) and in the SELECT, you have to tell which of the distinct entries for each grouped result row should be taken. For numbers, this can be average, minimum, maximum (to name some).

In your case, I can't see the sense to query the photos for drinks if you only want one row. You probably thought you could have an array of photos in your result for each drink, but SQL can't do this. If you only want any photo and you don't care which you'll get, just group by the drinks_id (in order to get only one row per drink):

SELECT name, price, photo
FROM drinks, drinks_photos
WHERE drinks.id = drinks_id 
GROUP BY drinks_id

name     price   photo
fanta    5       ./images/fanta-1.jpg
dew      4       ./images/dew-1.jpg

In MySQL, we also have GROUP_CONCAT, if you want the file names to be concatenated to one single string:

SELECT name, price, GROUP_CONCAT(photo, ',')
FROM drinks, drinks_photos
WHERE drinks.id = drinks_id 
GROUP BY drinks_id

name     price   photo
fanta    5       ./images/fanta-1.jpg,./images/fanta-2.jpg,./images/fanta-3.jpg
dew      4       ./images/dew-1.jpg,./images/dew-2.jpg

However, this can get dangerous if you have , within the field values, since most likely you want to split this again on the client side. It is also not a standard SQL aggregate function.

The following code will reduce the problem to check the protocol. The $_SERVER['APP_URL'] will display the domain name with the protocol

$_SERVER['APP_URL'] will return protocol://domain ( eg:-http://localhost)

$_SERVER['REQUEST_URI'] for remaining parts of the url such as /directory/subdirectory/something/else

 $url = $_SERVER['APP_URL'].$_SERVER['REQUEST_URI'];

The output would be like this

http://localhost/directory/subdirectory/something/else

You can include a .js file which has the script to set the

window.location.href = url;

Where url would be the url you wish to load.

Following on from Compile This' Answer, use the following method to obtain the date for any day of the week:

public static DateTime GetDayOfWeek(DateTime dateTime, DayOfWeek dayOfWeek)
{
   var monday = dateTime.Date.AddDays((7 + (dateTime.DayOfWeek - DayOfWeek.Monday) % 7) * -1);

   var diff = dayOfWeek - DayOfWeek.Monday;

   if (diff == -1)
   {
      diff = 6;
   }

   return monday.AddDays(diff);
} 

None of the suggestions above worked for me so I created a new file with a slightly different name and copied the contents of the offending file into the new file, renamed the offending file and renamed the new file with the offending file's name. Worked like a charm. Problem solved.

The easiest way to block these temporarily for testing purposes is to open up the inspect page in chrome by right-clicking anywhere on the page and clicking inspect or by pressing Ctrl+Shift+j and then going to the networking tab and then reloading the page which will send all the requests your page is supposed to make including that annoying favicon.ico. You can now simply right click the favicon.ico request and click "Block request URL".

All of the above answers are for devs who control the app source code. If you are a sysadmin, who's figuring our load-balancer or proxying configuration and is annoyed by this favicon.ico shenanigans, this simple trick does a better job. This answer is for Chrome, but I think there should be a similar alternative which you would figure out for Firefox/Opera/Tor/any other browser :)

This should work:

/^((?!PART).)*$/

If you only wanted to exclude it from the beginning of the line (I know you don't, but just FYI), you could use this:

/^(?!PART)/

Edit (by request): Why this pattern works

The (?!...) syntax is a negative lookahead, which I've always found tough to explain. Basically, it means "whatever follows this point must not match the regular expression /PART/." The site I've linked explains this far better than I can, but I'll try to break this down:

^         #Start matching from the beginning of the string.    
(?!PART)  #This position must not be followed by the string "PART".
.         #Matches any character except line breaks (it will include those in single-line mode).
$         #Match all the way until the end of the string.

The ((?!xxx).)* idiom is probably hardest to understand. As we saw, (?!PART) looks at the string ahead and says that whatever comes next can't match the subpattern /PART/. So what we're doing with ((?!xxx).)* is going through the string letter by letter and applying the rule to all of them. Each character can be anything, but if you take that character and the next few characters after it, you'd better not get the word PART.

The ^ and $ anchors are there to demand that the rule be applied to the entire string, from beginning to end. Without those anchors, any piece of the string that didn't begin with PART would be a match. Even PART itself would have matches in it, because (for example) the letter A isn't followed by the exact string PART.

Since we do have ^ and $, if PART were anywhere in the string, one of the characters would match (?=PART). and the overall match would fail. Hope that's clear enough to be helpful.

Create 
trigger `[dbo].[mytrigger]` on `[dbo].[Patients]` after update , insert as
begin
     --Sql logic
     print 'Hello world'     
 end 

Taking the top answer, as well as the suggestions from its comments, and modifying it to use SecureString instead of String, test for all control keys, and not error or write an extra "*" to the screen when the password length is 0, my solution is:

public static SecureString getPasswordFromConsole(String displayMessage) {
    SecureString pass = new SecureString();
    Console.Write(displayMessage);
    ConsoleKeyInfo key;

    do {
        key = Console.ReadKey(true);

        // Backspace Should Not Work
        if (!char.IsControl(key.KeyChar)) {
            pass.AppendChar(key.KeyChar);
            Console.Write("*");
        } else {
            if (key.Key == ConsoleKey.Backspace && pass.Length > 0) {
                pass.RemoveAt(pass.Length - 1);
                Console.Write("\b \b");
            }
        }
    }
    // Stops Receving Keys Once Enter is Pressed
    while (key.Key != ConsoleKey.Enter);
    return pass;
}

You get an apparently random set because ROWNUM is applied before the ORDER BY. So your query takes the first ten rows and sorts them.0 To select the top ten salaries you should use an analytic function in a subquery, then filter that:

 select * from 
     (select empno,
             ename,
             sal,
             row_number() over(order by sal desc nulls last) rnm
    from emp) 
 where rnm<=10

This program is doing almost everything with Public and private keys. The der format can be obtained but saving raw data ( without encoding base64). I hope this helps programmers.

import java.io.ByteArrayOutputStream;
import java.io.DataInputStream;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.PrintStream;
import java.security.InvalidKeyException;
import java.security.KeyFactory;
import java.security.KeyPair;
import java.security.KeyPairGenerator;
import java.security.NoSuchAlgorithmException;
import java.security.PrivateKey;
import java.security.PublicKey;
import java.security.Signature;
import java.security.SignatureException;

import sun.misc.BASE64Decoder;
import sun.misc.BASE64Encoder;
import sun.security.pkcs.PKCS8Key;
import sun.security.pkcs10.PKCS10;
import sun.security.x509.X500Name;

import java.security.spec.PKCS8EncodedKeySpec;
import java.security.spec.X509EncodedKeySpec;



/**
 * @author Desphilboy
 * DorOd bar shomA barobach
 *
 */
public class csrgenerator {

    private static PublicKey publickey= null;
    private static PrivateKey privateKey=null;
    //private static PKCS8Key privateKey=null;
    private static KeyPairGenerator kpg= null;
    private static ByteArrayOutputStream bs =null;
    private static csrgenerator thisinstance;
    private KeyPair keypair;
    private static PKCS10 pkcs10;
    private String signaturealgorithm= "MD5WithRSA";

    public String getSignaturealgorithm() {
        return signaturealgorithm;
    }



    public void setSignaturealgorithm(String signaturealgorithm) {
        this.signaturealgorithm = signaturealgorithm;
    }



    private csrgenerator() {
        try {
           kpg = KeyPairGenerator.getInstance("RSA");
        } catch (NoSuchAlgorithmException e) {
            e.printStackTrace();
            System.out.print("No such algorithm RSA in constructor csrgenerator\n");
        }
        kpg.initialize(2048);
        keypair = kpg.generateKeyPair();
        publickey = keypair.getPublic();
        privateKey = keypair.getPrivate();
    }



    /** Generates a new key pair 
    *
    * @param int bits 
    *   this is the number of bits in modulus must be 512, 1024, 2048  or so on 
    */
    public KeyPair generateRSAkys(int bits)
    {
          kpg.initialize(bits);
            keypair = kpg.generateKeyPair();
            publickey = keypair.getPublic();
            privateKey = keypair.getPrivate();
            KeyPair dup= keypair;
     return dup;
    }

     public static csrgenerator getInstance() {
            if (thisinstance == null)
                thisinstance = new csrgenerator();
            return thisinstance;
        }


     /**
      *  Returns a CSR as string  
      * @param cn  Common Name
      * @param OU  Organizational Unit 
      * @param Org  Organization
      * @param LocName Location name
      * @param Statename  State/Territory/Province/Region
      * @param Country    Country
      * @return     returns  csr as string.
      * @throws Exception
      */
     public String getCSR(String commonname, String organizationunit, String organization,String localname, String statename, String country ) throws Exception {
            byte[] csr = generatePKCS10(commonname, organizationunit, organization, localname, statename, country,signaturealgorithm);
            return new String(csr);
        }

     /** This function generates a new Certificate 
      * Signing Request. 
     *
     * @param CN
     *            Common Name, is X.509 speak for the name that distinguishes
     *            the Certificate best, and ties it to your Organization
     * @param OU
     *            Organizational unit
     * @param O
     *            Organization NAME
     * @param L
     *            Location
     * @param S
     *            State
     * @param C
     *            Country
     * @return    byte stream of generated request
     * @throws Exception
     */
    private static byte[] generatePKCS10(String CN, String OU, String O,String L, String S, String C,String sigAlg) throws Exception {
        // generate PKCS10 certificate request

        pkcs10 = new PKCS10(publickey);
       Signature   signature = Signature.getInstance(sigAlg);
        signature.initSign(privateKey);
        // common, orgUnit, org, locality, state, country
        //X500Name(String commonName, String organizationUnit,String organizationName,Local,State, String country)
        X500Name x500Name = new X500Name(CN, OU, O, L, S, C);
        pkcs10.encodeAndSign(x500Name,signature);
        bs = new ByteArrayOutputStream();
        PrintStream ps = new PrintStream(bs);
        pkcs10.print(ps);
        byte[] c = bs.toByteArray();
        try {
            if (ps != null)
                ps.close();
            if (bs != null)
                bs.close();
        } catch (Throwable th) {
        }
        return c;
    }

    public  PublicKey getPublicKey() {
        return publickey;
    }




    /**
     * @return
     */
    public PrivateKey getPrivateKey() {
        return privateKey;
    }

    /**
     * saves private key to a file
     * @param filename
     */
    public  void SavePrivateKey(String filename)
    {
        PKCS8EncodedKeySpec pemcontents=null;
        pemcontents= new PKCS8EncodedKeySpec( privateKey.getEncoded());
        PKCS8Key pemprivatekey= new  PKCS8Key( );
        try {
            pemprivatekey.decode(pemcontents.getEncoded());
        } catch (InvalidKeyException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
        }
        File file=new File(filename);
        try {

            file.createNewFile();
            FileOutputStream fos=new FileOutputStream(file);
            fos.write(pemprivatekey.getEncoded());
            fos.flush();
            fos.close();
        } catch (IOException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
        }



    }



    /**
     * Saves Certificate Signing Request to a file;
     * @param filename  is a String containing full path to the file which will be created containing the CSR.
     */
    public void SaveCSR(String filename)
    {
        FileOutputStream fos=null;
        PrintStream ps=null;
        File file;
        try {

            file = new File(filename);
            file.createNewFile();
            fos = new FileOutputStream(file);
            ps= new PrintStream(fos);
        }catch (IOException e)
        {
            System.out.print("\n could not open the file "+ filename);
        }

        try {
            try {
                pkcs10.print(ps);
            } catch (SignatureException e) {
                // TODO Auto-generated catch block
                e.printStackTrace();
            }
            ps.flush();
            ps.close();
        } catch (IOException e) {
            // TODO Auto-generated catch block
            System.out.print("\n cannot write to the file "+ filename);
            e.printStackTrace();

        }

        }


    /**
     * Saves both public key and private  key to file names specified
     * @param fnpub  file name of public key
     * @param fnpri  file name of private key
     * @throws IOException
     */
    public static void SaveKeyPair(String fnpub,String fnpri) throws IOException { 

// Store Public Key.
X509EncodedKeySpec x509EncodedKeySpec = new X509EncodedKeySpec(
publickey.getEncoded());
FileOutputStream fos = new FileOutputStream(fnpub);
fos.write(x509EncodedKeySpec.getEncoded());
fos.close();

// Store Private Key.
PKCS8EncodedKeySpec pkcs8EncodedKeySpec = new PKCS8EncodedKeySpec(privateKey.getEncoded());
fos = new FileOutputStream(fnpri);
fos.write(pkcs8EncodedKeySpec.getEncoded());
fos.close();
}


    /**
     * Reads a Private Key from a pem base64 encoded file.
     * @param filename name of the file to read.
     * @param algorithm Algorithm is usually "RSA"
     * @return returns the privatekey which is read from the file;
     * @throws Exception
     */
    public  PrivateKey getPemPrivateKey(String filename, String algorithm) throws Exception {
          File f = new File(filename);
          FileInputStream fis = new FileInputStream(f);
          DataInputStream dis = new DataInputStream(fis);
          byte[] keyBytes = new byte[(int) f.length()];
          dis.readFully(keyBytes);
          dis.close();

          String temp = new String(keyBytes);
          String privKeyPEM = temp.replace("-----BEGIN PRIVATE KEY-----", "");
          privKeyPEM = privKeyPEM.replace("-----END PRIVATE KEY-----", "");
          //System.out.println("Private key\n"+privKeyPEM);

          BASE64Decoder b64=new BASE64Decoder();
          byte[] decoded = b64.decodeBuffer(privKeyPEM);

          PKCS8EncodedKeySpec spec = new PKCS8EncodedKeySpec(decoded);
          KeyFactory kf = KeyFactory.getInstance(algorithm);
          return kf.generatePrivate(spec);
          }



    /**
     * Saves the private key to a pem file.
     * @param filename  name of the file to write the key into 
     * @param key the Private key to save.
     * @return  String representation of the pkcs8 object.
     * @throws Exception
     */
    public  String  SavePemPrivateKey(String filename) throws Exception {
        PrivateKey key=this.privateKey;
          File f = new File(filename);
          FileOutputStream fos = new FileOutputStream(f);
          DataOutputStream dos = new DataOutputStream(fos);


          byte[] keyBytes = key.getEncoded();
          PKCS8Key pkcs8= new PKCS8Key();
          pkcs8.decode(keyBytes);
          byte[] b=pkcs8.encode();

          BASE64Encoder b64=new BASE64Encoder();
          String  encoded = b64.encodeBuffer(b);

          encoded= "-----BEGIN PRIVATE KEY-----\r\n" + encoded + "-----END PRIVATE KEY-----";

         dos.writeBytes(encoded);
         dos.flush();
         dos.close();

          //System.out.println("Private key\n"+privKeyPEM);
        return pkcs8.toString();

          }


    /**
     * Saves a public key to a base64 encoded pem file
     * @param filename  name of the file 
     * @param key public key to be saved 
     * @return string representation of the pkcs8 object.
     * @throws Exception
     */
    public  String  SavePemPublicKey(String filename) throws Exception {
        PublicKey key=this.publickey;  
        File f = new File(filename);
          FileOutputStream fos = new FileOutputStream(f);
          DataOutputStream dos = new DataOutputStream(fos);


          byte[] keyBytes = key.getEncoded();
          BASE64Encoder b64=new BASE64Encoder();
          String  encoded = b64.encodeBuffer(keyBytes);

          encoded= "-----BEGIN PUBLIC KEY-----\r\n" + encoded + "-----END PUBLIC KEY-----";

         dos.writeBytes(encoded);
         dos.flush();
         dos.close();

          //System.out.println("Private key\n"+privKeyPEM);
      return  encoded.toString();

          }





       /**
     * reads a public key from a file
     * @param filename name of the file to read
     * @param algorithm is usually RSA
     * @return the read public key
     * @throws Exception
     */
    public  PublicKey getPemPublicKey(String filename, String algorithm) throws Exception {
          File f = new File(filename);
          FileInputStream fis = new FileInputStream(f);
          DataInputStream dis = new DataInputStream(fis);
          byte[] keyBytes = new byte[(int) f.length()];
          dis.readFully(keyBytes);
          dis.close();

          String temp = new String(keyBytes);
          String publicKeyPEM = temp.replace("-----BEGIN PUBLIC KEY-----\n", "");
          publicKeyPEM = publicKeyPEM.replace("-----END PUBLIC KEY-----", "");


          BASE64Decoder b64=new BASE64Decoder();
          byte[] decoded = b64.decodeBuffer(publicKeyPEM);

          X509EncodedKeySpec spec =
                new X509EncodedKeySpec(decoded);
          KeyFactory kf = KeyFactory.getInstance(algorithm);
          return kf.generatePublic(spec);
          }




    public static void main(String[] args) throws Exception {
        csrgenerator gcsr = csrgenerator.getInstance();
        gcsr.setSignaturealgorithm("SHA512WithRSA");
        System.out.println("Public Key:\n"+gcsr.getPublicKey().toString());

        System.out.println("Private Key:\nAlgorithm: "+gcsr.getPrivateKey().getAlgorithm().toString());
        System.out.println("Format:"+gcsr.getPrivateKey().getFormat().toString());
        System.out.println("To String :"+gcsr.getPrivateKey().toString());
        System.out.println("GetEncoded :"+gcsr.getPrivateKey().getEncoded().toString());
        BASE64Encoder encoder= new BASE64Encoder();
        String s=encoder.encodeBuffer(gcsr.getPrivateKey().getEncoded());
        System.out.println("Base64:"+s+"\n");

        String csr = gcsr.getCSR( "[email protected]","baxshi az xodam", "Xodam","PointCook","VIC" ,"AU");
        System.out.println("CSR Request Generated!!");
        System.out.println(csr);
        gcsr.SaveCSR("c:\\testdir\\javacsr.csr");
        String p=gcsr.SavePemPrivateKey("c:\\testdir\\java_private.pem");
        System.out.print(p);
        p=gcsr.SavePemPublicKey("c:\\testdir\\java_public.pem");
        privateKey= gcsr.getPemPrivateKey("c:\\testdir\\java_private.pem", "RSA");
        BASE64Encoder encoder1= new BASE64Encoder();
        String s1=encoder1.encodeBuffer(gcsr.getPrivateKey().getEncoded());
        System.out.println("Private Key in Base64:"+s1+"\n");
        System.out.print(p);


    }

    }

private modifier will make your class inaccessible from outside, so there wouldn't be any advantage of this and I think that is why it is illegal and only public, abstract & final are permitted.

Note : Even you can not make it protected.

If you need to raise 2 to a power. The fastest way to do so is to bit shift by the power.

2 ** 3 == 1 << 3 == 8
2 ** 30 == 1 << 30 == 1073741824 (A Gigabyte)

Apache has 2 types of MPM (Multi-Processing Modules) defined:

1:Prefork 2: Worker

By default, Apacke is configured in preforked mode i.e. non-threaded pre-forking web server. That means that each Apache child process contains a single thread and handles one request at a time. Because of that, it consumes more resources.

Apache also has the worker MPM that turns Apache into a multi-process, multi-threaded web server. Worker MPM uses multiple child processes with many threads each.

I believe that you are looking for the java.lang.BigDecimal class.

We can consider a telephone call In that Number is wsdl and exchange of information is soap.

WSDL is description how to connect with communication server.SOAP is have communication messages.

Guid.NewGuid() creates a new UUID using an algorithm that is designed to make collisions very, very unlikely.

new Guid() creates a UUID that is all-zeros.

Generally you would prefer the former, because that's the point of a UUID (unless you're receiving it from somewhere else of course).

There are cases where you do indeed want an all-zero UUID, but in this case Guid.Empty or default(Guid) is clearer about your intent, and there's less chance of someone reading it expecting a unique value had been created.

In all, new Guid() isn't that useful due to this lack of clarity, but it's not possible to have a value-type that doesn't have a parameterless constructor that returns an all-zeros-and-nulls value.

Edit: Actually, it is possible to have a parameterless constructor on a value type that doesn't set everything to zero and null, but you can't do it in C#, and the rules about when it will be called and when there will just be an all-zero struct created are confusing, so it's not a good idea anyway.

Anyone using composer dependencies, you might want to consider this library: https://github.com/ramsey/uuid

It doesn't get any easier than this:

Uuid::uuid4();

Just type javac. If it is installed you get usage information, otherwise it would just ask if you would like to install Java.

Update December 8th, 2015 According to Google Support using the

googledrive.com/host/ID

method will be turned off on Aug 31st, 2016.

I just ran into this issue.

The trick is to treat your Google Drive folder like a web host.

Update April 1st, 2015

Google Drive has changed and there's a simple way to direct link to your drive. I left my previous answers below for reference but to here's an updated answer.

1. Create a Public folder in Google Drive.
   
   
2. Share this drive publicly.
   
   
   
   
3. Get your Folder UUID from the address bar when you're in that folder
   
   
4. Put that UUID in this URL
   
   https://googledrive.com/host/<folder UUID>/
5. Add the file name to where your file is located.
   
   https://googledrive.com/host/<folder UUID>/<file name>

Which is intended functionality by Google
new Google Drive Link.

All you have to do is simple get the host URL for a publicly shared drive folder. To do this, you can upload a plain HTML file and preview it in Google Drive to find your host URL.

Here are the steps:

1. Create a folder in Google Drive.
   
   
2. Share this drive publicly.
   
   
   
   
3. Upload a simple HTML file. Add any additional files (subfolders ok)
   
   
   
   
4. Open and "preview" the HTML file in Google Drive
   
   
   
   
5. Get the URL address for this folder
   
   
   
   
6. Create a direct link URL from your URL folder base
   
   
   
   
7. This URL should allow direct downloads of your large files.
   
   

[edit]

I forgot to add. If you use subfolders to organize your files, you simple use the folder name as you would expect in a URL hierarchy.

https://googledrive.com/host/<your public folders id string>/images/my-image.png

What I was looking to do

I created a custom Debian image with Virtual Box for Vagrant. I wanted to share this ".box" file with colleagues so they could put the direct link into their Vagrantfile.

In the end, I needed a direct link to the actual file.

Google Drive problem

If you set the file permissions to be publicly available and create/generate a direct access link by using something like the gdocs2direct tool or just crafting the link yourself:

https://docs.google.com/uc?export=download&id=<your file id>

You will get a cookie based verification code and prompt "Google could not scan this file" prompt, which won't work for things such as wget or Vagrantfile configs.

The code that it generates is a simple code that appends GET query variable ...&confirm=### to the string, but it's per user specific, so it's not like you can copy/paste that query variable for others.

But if you use the above "Web page hosting" method, you can get around that prompt.

I hope that helps!

If you're on Windows, this might work:

PDF Creator Pilot

There's also a whitepaper of a PDF creation and editing framework in Python. It's a little dated, but maybe can give you some useful info:

Using Python as PDF Editing and Processing Framework

For Spring MVC I have been trying for hours to do this and managed to have a simpler version that worked for taking form input both data and image.

<form action="/handleform" method="post" enctype="multipart/form-data">
  <input type="text" name="name" />
  <input type="text" name="age" />
  <input type="file" name="file" />
  <input type="submit" />
</form>

Controller to handle

@Controller
public class FormController {
    @RequestMapping(value="/handleform",method= RequestMethod.POST)
    ModelAndView register(@RequestParam String name, @RequestParam int age, @RequestParam MultipartFile file)
            throws ServletException, IOException {

        System.out.println(name);
        System.out.println(age);
        if(!file.isEmpty()){
            byte[] bytes = file.getBytes();
            String filename = file.getOriginalFilename();
            BufferedOutputStream stream =new BufferedOutputStream(new FileOutputStream(new File("D:/" + filename)));
            stream.write(bytes);
            stream.flush();
            stream.close();
        }
        return new ModelAndView("index");
    }
}

Hope it helps :)

In eclipse Pressing Ctrl + Shift + L, will list all the shortcuts.

Be aware that the third parameter (value) in the examples given above: the value is a constant (e.g. 'Z' or c(20,30)).

Defining the third parameter using values from the data frame itself can lead to confusion.

E.g. with a simple data frame such as this (using dplyr::data_frame):

tmp <- data_frame(a=1:10, b=sample(LETTERS[24:26], 10, replace=T))

This will create somthing like this:

       a     b
   (int) (chr)
1      1     X
2      2     Y
3      3     Y
4      4     X
5      5     Z

..etc

Now suppose you want wanted to do, was to multiply the values in column 'a' by 2, but only where column 'b' is "X". My immediate thought would be something like this:

with(tmp, replace(a, b=="X", a*2))

That will not provide the desired outcome, however. The a*2 will defined as a fixed vector rather than a reference to the 'a' column. The vector 'a*2' will thus be

[1]  2  4  6  8 10 12 14 16 18 20

at the start of the 'replace' operation. Thus, the first row where 'b' equals "X", the value in 'a' will be placed by 2. The second time, it will be replaced by 4, etc ... it will not be replaced by two-times-the-value-of-a in that particular row.

Yes, if bar is not None is more explicit, and thus better, assuming it is indeed what you want. That's not always the case, there are subtle differences: if not bar: will execute if bar is any kind of zero or empty container, or False. Many people do use not bar where they really do mean bar is not None.

This should work:

window.onload = function() {
  document.getElementById('about').className = 'expand';
};

Or if you're using jQuery:

$(function() {
  $('#about').addClass('expand');
});

Since you may have more than one legends in a plot, a way to selectively remove just one of the titles without leaving an empty space is to set the name argument of the scale_ function to NULL, i.e.

scale_fill_discrete(name = NULL)

(kudos to @pascal for a comment on another thread)

Here's a different approach. The heart of it was created by turning on the Macro Recorder and filtering the columns per your specifications. Then there's a bit of code to copy the results. It will run faster than looping through each row and column:

Sub FilterAndCopy()
Dim LastRow As Long

Sheets("Sheet2").UsedRange.Offset(0).ClearContents
With Worksheets("Sheet1")
    .Range("$A:$E").AutoFilter
    .Range("$A:$E").AutoFilter field:=1, Criteria1:="#N/A"
    .Range("$A:$E").AutoFilter field:=2, Criteria1:="=String1", Operator:=xlOr, Criteria2:="=string2"
    .Range("$A:$E").AutoFilter field:=3, Criteria1:=">0"
    .Range("$A:$E").AutoFilter field:=5, Criteria1:="Number"
    LastRow = .Range("A" & .Rows.Count).End(xlUp).Row
    .Range("A1:A" & LastRow).SpecialCells(xlCellTypeVisible).EntireRow.Copy _
            Destination:=Sheets("Sheet2").Range("A1")
End With
End Sub

As a side note, your code has more loops and counter variables than necessary. You wouldn't need to loop through the columns, just through the rows. You'd then check the various cells of interest in that row, much like you did.

You could also use

df['bar'] = df['bar'].str.cat(df['foo'].values.astype(str), sep=' is ')

$variable[0] != "_"

How does it work?

In PHP you can get particular character of a string with array index notation. $variable[0] is the first character of a string (if $variable is a string).