On a rather unrelated note: more performance hacks!

• [the first «conjecture» has been finally debunked by @ShreevatsaR; removed]

• When traversing the sequence, we can only get 3 possible cases in the 2-neighborhood of the current element N (shown first):

  1. [even] [odd]
  2. [odd] [even]
  3. [even] [even]

  To leap past these 2 elements means to compute (N >> 1) + N + 1, ((N << 1) + N + 1) >> 1 and N >> 2, respectively.

  Let`s prove that for both cases (1) and (2) it is possible to use the first formula, (N >> 1) + N + 1.

  Case (1) is obvious. Case (2) implies (N & 1) == 1, so if we assume (without loss of generality) that N is 2-bit long and its bits are ba from most- to least-significant, then a = 1, and the following holds:

  (N << 1) + N + 1:     (N >> 1) + N + 1:
  
          b10                    b1
           b1                     b
         +  1                   + 1
         ----                   ---
         bBb0                   bBb
  

  where B = !b. Right-shifting the first result gives us exactly what we want.

  Q.E.D.: (N & 1) == 1 ? (N >> 1) + N + 1 == ((N << 1) + N + 1) >> 1.

  As proven, we can traverse the sequence 2 elements at a time, using a single ternary operation. Another 2× time reduction.

The resulting algorithm looks like this:

uint64_t sequence(uint64_t size, uint64_t *path) {
    uint64_t n, i, c, maxi = 0, maxc = 0;

    for (n = i = (size - 1) | 1; i > 2; n = i -= 2) {
        c = 2;
        while ((n = ((n & 3)? (n >> 1) + n + 1 : (n >> 2))) > 2)
            c += 2;
        if (n == 2)
            c++;
        if (c > maxc) {
            maxi = i;
            maxc = c;
        }
    }
    *path = maxc;
    return maxi;
}

int main() {
    uint64_t maxi, maxc;

    maxi = sequence(1000000, &maxc);
    printf("%llu, %llu\n", maxi, maxc);
    return 0;
}

Here we compare n > 2 because the process may stop at 2 instead of 1 if the total length of the sequence is odd.

[EDIT:]

Let`s translate this into assembly!

MOV RCX, 1000000;



DEC RCX;
AND RCX, -2;
XOR RAX, RAX;
MOV RBX, RAX;

@main:
  XOR RSI, RSI;
  LEA RDI, [RCX + 1];

  @loop:
    ADD RSI, 2;
    LEA RDX, [RDI + RDI*2 + 2];
    SHR RDX, 1;
    SHRD RDI, RDI, 2;    ror rdi,2   would do the same thing
    CMOVL RDI, RDX;      Note that SHRD leaves OF = undefined with count>1, and this doesn't work on all CPUs.
    CMOVS RDI, RDX;
    CMP RDI, 2;
  JA @loop;

  LEA RDX, [RSI + 1];
  CMOVE RSI, RDX;

  CMP RAX, RSI;
  CMOVB RAX, RSI;
  CMOVB RBX, RCX;

  SUB RCX, 2;
JA @main;



MOV RDI, RCX;
ADD RCX, 10;
PUSH RDI;
PUSH RCX;

@itoa:
  XOR RDX, RDX;
  DIV RCX;
  ADD RDX, '0';
  PUSH RDX;
  TEST RAX, RAX;
JNE @itoa;

  PUSH RCX;
  LEA RAX, [RBX + 1];
  TEST RBX, RBX;
  MOV RBX, RDI;
JNE @itoa;

POP RCX;
INC RDI;
MOV RDX, RDI;

@outp:
  MOV RSI, RSP;
  MOV RAX, RDI;
  SYSCALL;
  POP RAX;
  TEST RAX, RAX;
JNE @outp;

LEA RAX, [RDI + 59];
DEC RDI;
SYSCALL;

Use these commands to compile:

nasm -f elf64 file.asm
ld -o file file.o

See the C and an improved/bugfixed version of the asm by Peter Cordes on Godbolt. (editor's note: Sorry for putting my stuff in your answer, but my answer hit the 30k char limit from Godbolt links + text!)

I found answer myself; and if someone will face same issue, i hope my solution will work for them as well.

• Downgrade NodeJs to 0.10.36
• Upgrade Android SDK 22

I had this problem when using X2Go. The problem happened in a folder that was shared between the remote computer and my local PC.

Solution: cd out of that folder and in again. That fixed it.

Short answer: I think tgbaggio is right. You hit HDFS throughput limits on your executors.

I think the answer here may be a little simpler than some of the recommendations here.

The clue for me is in the cluster network graph. For run 1 the utilization is steady at ~50 M bytes/s. For run 3 the steady utilization is doubled, around 100 M bytes/s.

From the cloudera blog post shared by DzOrd, you can see this important quote:

I’ve noticed that the HDFS client has trouble with tons of concurrent threads. A rough guess is that at most five tasks per executor can achieve full write throughput, so it’s good to keep the number of cores per executor below that number.

So, let's do a few calculations see what performance we expect if that is true.

Run 1: 19 GB, 7 cores, 3 executors

• 3 executors x 7 threads = 21 threads
• with 7 cores per executor, we expect limited IO to HDFS (maxes out at ~5 cores)
• effective throughput ~= 3 executors x 5 threads = 15 threads

Run 3: 4 GB, 2 cores, 12 executors

• 2 executors x 12 threads = 24 threads
• 2 cores per executor, so hdfs throughput is ok
• effective throughput ~= 12 executors x 2 threads = 24 threads

If the job is 100% limited by concurrency (the number of threads). We would expect runtime to be perfectly inversely correlated with the number of threads.

ratio_num_threads = nthread_job1 / nthread_job3 = 15/24 = 0.625
inv_ratio_runtime = 1/(duration_job1 / duration_job3) = 1/(50/31) = 31/50 = 0.62

So ratio_num_threads ~= inv_ratio_runtime, and it looks like we are network limited.

This same effect explains the difference between Run 1 and Run 2.

Run 2: 19 GB, 4 cores, 3 executors

• 3 executors x 4 threads = 12 threads
• with 4 cores per executor, ok IO to HDFS
• effective throughput ~= 3 executors x 4 threads = 12 threads

Comparing the number of effective threads and the runtime:

ratio_num_threads = nthread_job2 / nthread_job1 = 12/15 = 0.8
inv_ratio_runtime = 1/(duration_job2 / duration_job1) = 1/(55/50) = 50/55 = 0.91

It's not as perfect as the last comparison, but we still see a similar drop in performance when we lose threads.

Now for the last bit: why is it the case that we get better performance with more threads, esp. more threads than the number of CPUs?

A good explanation of the difference between parallelism (what we get by dividing up data onto multiple CPUs) and concurrency (what we get when we use multiple threads to do work on a single CPU) is provided in this great post by Rob Pike: Concurrency is not parallelism.

The short explanation is that if a Spark job is interacting with a file system or network the CPU spends a lot of time waiting on communication with those interfaces and not spending a lot of time actually "doing work". By giving those CPUs more than 1 task to work on at a time, they are spending less time waiting and more time working, and you see better performance.

For some reason, just allowing less secure app config did not work for me even the captcha thing. I had to do another step which is enabling IMAP config:

From google's help page: https://support.google.com/mail/answer/7126229?p=WebLoginRequired&visit_id=1-636691283281086184-1917832285&rd=3#cantsignin

• In the top right, click Settings Settings.
• Click Settings.
• Click the Forwarding and POP/IMAP tab.
• In the "IMAP Access" section, select Enable IMAP.
• Click Save Changes.

Wget currently only supports x-www-form-urlencoded data. --post-file is not for transmitting files as form attachments, it expects data with the form: key=value&otherkey=example.

--post-data and --post-file work the same way: the only difference is that --post-data allows you to specify the data in the command line, while --post-file allows you to specify the path of the file that contain the data to send.

Here's the documentation:

 --post-data=string
       --post-file=file
           Use POST as the method for all HTTP requests and send the specified data
           in the request body.  --post-data sends string as data, whereas
           --post-file sends the contents of file.  Other than that, they work in
           exactly the same way. In particular, they both expect content of the
           form "key1=value1&key2=value2", with percent-encoding for special
           characters; the only difference is that one expects its content as a
           command-line parameter and the other accepts its content from a file. In
           particular, --post-file is not for transmitting files as form
           attachments: those must appear as "key=value" data (with appropriate
           percent-coding) just like everything else. Wget does not currently
           support "multipart/form-data" for transmitting POST data; only
           "application/x-www-form-urlencoded". Only one of --post-data and
           --post-file should be specified.

Regarding your authentication token, it should either be provided in the header, in the path of the url, or in the data itself. This must be indicated somewhere in the documentation of the service you use. In a POST request, as in a GET request, you must specify the data using keys and values. This way the server will be able to receive multiple information with specific names. It's similar with variables.

Hence, you can't just send a magic token to the server, you also need to specify the name of the key. If the key is "token", then it should be token=YOUR_TOKEN.

wget --post-data 'user=foo&password=bar' http://example.com/auth.php

Also, you should consider using curl if you can because it is easier to send files using it. There are many examples on the Internet for that.

From near the beginning of the PIL Tutorial:

Once you have an instance of the Image class, you can use the methods defined by this class to process and manipulate the image. For example, let's display the image we just loaded:

     >>> im.show()

Update:

Nowadays theImage.show() method is formally documented in the Pillow fork of PIL along with an explanation of how it's implemented on different OSs.

select T.TABLE_NAME, T.TABLESPACE_NAME, t.avg_row_len*t.num_rows from dba_tables t
order by T.TABLE_NAME asc

See e.g. http://www.dba-oracle.com/t_script_oracle_table_size.htm for more options

Here is the simple way to create a folder.......

#include <windows.h>
#include <stdio.h>

void CreateFolder(const char * path)
{   
    if(!CreateDirectory(path ,NULL))
    {
        return;
    }
}


CreateFolder("C:\\folder_name\\")

This above code works well for me.

I had the same question but applying the provided solutions changed the file to write in. Once I selected the new excel file, I was also writing in that file and not in my original file. My solution for this issue is below:

Sub GetData()

    Dim excelapp As Application
    Dim source As Workbook
    Dim srcSH1 As Worksheet
    Dim sh As Worksheet
    Dim path As String
    Dim nmr As Long
    Dim i As Long

    nmr = 20

    Set excelapp = New Application

    With Application.FileDialog(msoFileDialogOpen)
        .AllowMultiSelect = False
        .Filters.Add "Excel Files", "*.xlsx; *.xlsm; *.xls; *.xlsb", 1
        .Show
        path = .SelectedItems.Item(1)
    End With

    Set source = excelapp.Workbooks.Open(path)
    Set srcSH1 = source.Worksheets("Sheet1")
    Set sh = Sheets("Sheet1")

    For i = 1 To nmr
        sh.Cells(i, "A").Value = srcSH1.Cells(i, "A").Value
    Next i

End Sub

With excelapp a new application will be called. The with block sets the path for the external file. Finally, I set the external Workbook with source and srcSH1 as a Worksheet within the external sheet.

If you'd like to do this using the command line, you can do this if you have ESXi 6.0 (or possibly even ESXi 5.5) running, by using govc, which is a very helpful utility for interacting with both your vCenter and its associated resources.

Depending on your setup, you can

# setup your credentials
export GOVC_USERNAME=YOUR_USERNAME GOVC_PASSWORD=YOUR_PASSWORD
govc export.ovf -u your-vcsa-url.example.com -vm VM_NAME -dc VMS_DATACENTER export-folder

Then, you'll have your VM VM_NAME exported in the folder export-folder. From there, you can then

govc import.ovf -u your-other-vcsa-url.example.com -vm NEW_VM_NAME -dc NEW_DATACENTER export-folder/VM_NAME.ovf

That'll import it into your other vCenter. You might have to specify -ds NEW_DATASTORE too, if you have more than one datastore available, but govc will tell you so if you need to.

The commands above require that govc is installed, which you should, because it's far better than ovftool either way.

I've found my optimal blocksize to be 8 MB (equal to disk cache?) I needed to wipe (some say: wash) the empty space on a disk before creating a compressed image of it. I used:

cd /media/DiskToWash/
dd if=/dev/zero of=zero bs=8M; rm zero

I experimented with values from 4K to 100M.

After letting dd to run for a while I killed it (Ctlr+C) and read the output:

36+0 records in
36+0 records out
301989888 bytes (302 MB) copied, 15.8341 s, 19.1 MB/s

As dd displays the input/output rate (19.1MB/s in this case) it's easy to see if the value you've picked is performing better than the previous one or worse.

My scores:

bs=   I/O rate
---------------
4K    13.5 MB/s
64K   18.3 MB/s
8M    19.1 MB/s <--- winner!
10M   19.0 MB/s
20M   18.6 MB/s
100M  18.6 MB/s   

Note: To check what your disk cache/buffer size is, you can use sudo hdparm -i /dev/sda

"Using HTML5/Canvas/JavaScript to take screenshots" answers your problem.

You can use JavaScript/Canvas to do the job but it is still experimental.

Update

And there's your problem - you do have to click event handlers for some a elements. In this case, the order in which you attach the handlers matters since they'll be fired in that order.

Here's a working fiddle that shows the behaviour you want.

This should be your code:

$(document).ready(function(){


    $('#tabs div.tab').hide();
    $('#tabs div.tab:first').show();
    $('#tabs ul li:first').addClass('active');

    $("div.subtab_left li.notebook a").click(function(e) {
        e.stopImmediatePropagation();
        alert("asdasdad");
        return false;
    });

    $('#tabs ul li a').click(function(){
        alert("Handling link click");
        $('#tabs ul li').removeClass('active');
        $(this).parent().addClass('active');
        var currentTab = $(this).attr('href');
        $('#tabs div.tab').hide();
        $(currentTab).show();
        return false;
    });

});

Note that the order of attaching the handlers has been exchanged and e.stopImmediatePropagation() is used to stop the other click handler from firing while return false is used to stop the default behaviour of following the link (as well as stopping the bubbling of the event. You may find that you need to use only e.stopPropagation).

Play around with this, if you remove the e.stopImmediatePropagation() you'll find that the second click handler's alert will fire after the first alert. Removing the return false will have no effect on this behaviour but will cause links to be followed by the browser.

Note

A better fix might be to ensure that the selectors return completely different sets of elements so there is no overlap but this might not always be possible in which case the solution described above might be one way to consider.

1. I don't see why your first code snippet would not work. What's the default action that you're seeing that you want to stop?

   If you've attached other event handlers to the link, you should look into event.stopPropagation() and event.stopImmediatePropagation() instead. Note that return false is equivalent to calling both event.preventDefault and event.stopPropagation()^ref

2. In your second code snippet, e is not defined. So an error would thrown at e.preventDefault() and the next lines never execute. In other words

   $("div.subtab_left li.notebook a").click(function() {
       e.preventDefault();
       alert("asdasdad");
       return false;   
   });
   

   should be

   //note the e declared in the function parameters now
   $("div.subtab_left li.notebook a").click(function(e) {
       e.preventDefault();
       alert("asdasdad");
       return false;   
   });
   

Here's a working example showing that this code indeed does work and that return false is not really required if you only want to stop the following of a link.

i used chardet to detect possible encoding of this data ( if its text ), but get {'confidence': 0.0, 'encoding': None}. Then i tried to use pickle.load and get nothing again. I tried to save this as file , test many different formats and failed here too. Maybe you tell us what type have this 16512 bytes of mysterious data?

How about:

String numbers = text.substring(text.length() - 7);

That assumes that there are 7 characters at the end, of course. It will throw an exception if you pass it "12345". You could address that this way:

String numbers = text.substring(Math.max(0, text.length() - 7));

or

String numbers = text.length() <= 7 ? text : text.substring(text.length() - 7);

Note that this still isn't doing any validation that the resulting string contains numbers - and it will still throw an exception if text is null.

Here is a DLL that shows:
* Hard drive ID (unique hardware serial number written in drive's IDE electronic chip)
* Partition ID (volume serial number)
* CPU ID (unique hardware ID)
* CPU vendor
* CPU running speed
* CPU theoretic speed
* Memory Load ( Total memory used in percentage (%) )
* Total Physical ( Total physical memory in bytes )
* Avail Physical ( Physical memory left in bytes )
* Total PageFile ( Total page file in bytes )
* Available PageFile( Page file left in bytes )
* Total Virtual( Total virtual memory in bytes )
* Available Virtual ( Virtual memory left in bytes )
* Bios unique identification numberBiosDate
* Bios unique identification numberBiosVersion
* Bios unique identification numberBiosProductID
* Bios unique identification numberBiosVideo

(text grabbed from original web site)
It works with C#.

I found that this happens because: http://support.microsoft.com/kb/913399

SQL Server only releases all the pages that a heap table uses when the following conditions are true: A deletion on this table occurs. A table-level lock is being held. Note A heap table is any table that is not associated with a clustered index.

If pages are not deallocated, other objects in the database cannot reuse the pages.

However, when you enable a row versioning-based isolation level in a SQL Server 2005 database, pages cannot be released even if a table-level lock is being held.

Microsoft's solution: http://support.microsoft.com/kb/913399

To work around this problem, use one of the following methods: Include a TABLOCK hint in the DELETE statement if a row versioning-based isolation level is not enabled. For example, use a statement that is similar to the following:

DELETE FROM TableName WITH (TABLOCK)

Note represents the name of the table. Use the TRUNCATE TABLE statement if you want to delete all the records in the table. For example, use a statement that is similar to the following:

TRUNCATE TABLE TableName

Create a clustered index on a column of the table. For more information about how to create a clustered index on a table, see the "Creating a Clustered Index" topic in SQL

You'll notice at the bottom of the link that it is NOT noted that it applies to SQL Server 2008 but I think it does

Here's the mysql reference for cursors. So I'm guessing it's something like this:

  DECLARE done INT DEFAULT 0;
  DECLARE products_id INT;
  DECLARE result varchar(4000);
  DECLARE cur1 CURSOR FOR SELECT products_id FROM sets_products WHERE set_id = 1;
  DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;

  OPEN cur1;

  REPEAT
    FETCH cur1 INTO products_id;
    IF NOT done THEN
      CALL generate_parameter_list(@product_id, @result);
      SET param = param + "," + result; -- not sure on this syntax
    END IF;
  UNTIL done END REPEAT;

  CLOSE cur1;

  -- now trim off the trailing , if desired

In most cases, it really doesn't matter that much. Just pick a good size such as 4K or 16K and stick with it. If you're positive that this is the bottleneck in your application, then you should start profiling to find the optimal buffer size. If you pick a size that's too small, you'll waste time doing extra I/O operations and extra function calls. If you pick a size that's too big, you'll start seeing a lot of cache misses which will really slow you down. Don't use a buffer bigger than your L2 cache size.

Just to note that prefixing the tagName in a selector is slower than just using the id. In your case jQuery will get all the inputs rather than just using the getElementById. Just use $('#textbox')

After trying most of the solutions here, I finally just added a reference to the project from the click once project, this changed it to Include (Auto) from Include and it finally worked.

The TextBox has a property called ReadOnly. If you set that property to true then the TextBox will still be able to scroll but the user wont be able to change the value.

You cannot add a new property() to an instance at runtime, because properties are data descriptors. Instead you must dynamically create a new class, or overload __getattribute__ in order to process data descriptors on instances.

If you are using TortoiseSVN, right-click on a file and then select TortoiseSVN / Add to ignore list. This will add the file/wildcard to the svn:ignore property.

svn:ignore will be checked when you are checking in files, and matching files will be ignored. I have the following ignore list for a Visual Studio .NET project:

bin obj
*.exe
*.dll
_ReSharper
*.pdb
*.suo

You can find this list in the context menu at TortoiseSVN / Properties.

The CSV format uses commas to separate values, values which contain carriage returns, linefeeds, commas, or double quotes are surrounded by double-quotes. Values that contain double quotes are quoted and each literal quote is escaped by an immediately preceding quote: For example, the 3 values:

test
list, of, items
"go" he said

would be encoded as:

test
"list, of, items"
"""go"" he said"

Any field can be quoted but only fields that contain commas, CR/NL, or quotes must be quoted.

There is no real standard for the CSV format, but almost all applications follow the conventions documented here. The RFC that was mentioned elsewhere is not a standard for CSV, it is an RFC for using CSV within MIME and contains some unconventional and unnecessary limitations that make it useless outside of MIME.

A gotcha that many CSV modules I have seen don't accommodate is the fact that multiple lines can be encoded in a single field which means you can't assume that each line is a separate record, you either need to not allow newlines in your data or be prepared to handle this.

You can also use math function to do this

var i = 0;
$('#button').on('click', function() {
    if (i++ % 2 == 0) {
        $(this).val("Push me!");
    } else {
        $(this).val("Don't push me!");
    }
});

DEMO

@VonC's answer to a duplicate question:

If, as commented, Paraminko does not support PPK key, the official solution, as seen here, would be to use PuTTYgen.

But you can also use the Python library CkSshKey to make that same conversion directly in your program.

See "Convert PuTTY Private Key (ppk) to OpenSSH (pem)"

import sys
import chilkat

key = chilkat.CkSshKey()

#  Load an unencrypted or encrypted PuTTY private key.

#  If  your PuTTY private key is encrypted, set the Password
#  property before calling FromPuttyPrivateKey.
#  If your PuTTY private key is not encrypted, it makes no diffference
#  if Password is set or not set.
key.put_Password("secret")

#  First load the .ppk file into a string:

keyStr = key.loadText("putty_private_key.ppk")

#  Import into the SSH key object:
success = key.FromPuttyPrivateKey(keyStr)
if (success != True):
    print(key.lastErrorText())
    sys.exit()

#  Convert to an encrypted or unencrypted OpenSSH key.

#  First demonstrate converting to an unencrypted OpenSSH key

bEncrypt = False
unencryptedKeyStr = key.toOpenSshPrivateKey(bEncrypt)
success = key.SaveText(unencryptedKeyStr,"unencrypted_openssh.pem")
if (success != True):
    print(key.lastErrorText())
    sys.exit()

Yes, C++ supports bool and it is a data type. For reference - Bool data type

you could do:

file.write(your_string + '\n')

as suggested by another answer, but why using string concatenation (slow, error-prone) when you can call file.write twice:

file.write(your_string)
file.write("\n")

note that writes are buffered so it amounts to the same thing.

Bitmap d = new Bitmap(c.Width, c.Height);

for (int i = 0; i < c.Width; i++)
{
    for (int x = 0; x < c.Height; x++)
    {
        Color oc = c.GetPixel(i, x);
        int grayScale = (int)((oc.R * 0.3) + (oc.G * 0.59) + (oc.B * 0.11));
        Color nc = Color.FromArgb(oc.A, grayScale, grayScale, grayScale);
        d.SetPixel(i, x, nc);
    }
}

This way it also keeps the alpha channel.
Enjoy.

Here is an up-to-date approach as of October 2020, with Android X. This comes from Android's documentation, "Enable multidex for apps with over 64K methods."

For minSdk >= 21

You do not need to do anything. All of these devices use the Android RunTime (ART) VM, which supports multidex natively.

For minSdk < 21

In your module-level build.gradle, ensure that the following configurations are populated:

android {
    defaultConfig {
        multiDexEnabled true
    }
}

dependencies {
    implementation 'androidx.multidex:multidex:2.0.1'
}

You need to install explicit multidex support. The documentation includes three methods to do so, and you have to pick one.

For example, in your src/main/AndroidManifest.xml, you can declare MultiDexApplication as the application:name:

<manifest package="com.your.package"
          xmlns:android="http://schemas.android.com/apk/res/android">
    <application android:name="androidx.multidex.MultiDexApplication" />
</manifest>

Eduardo Molteni had a great answer:

• SQL Server Automated Backups

Using Windows Scheduled Tasks:

In the batch file

"C:\Program Files\Microsoft SQL Server\100\Tools\Binn\SQLCMD.EXE" -S 
(local)\SQLExpress -i D:\dbbackups\SQLExpressBackups.sql

In SQLExpressBackups.sql

BACKUP DATABASE MyDataBase1 TO  DISK = N'D:\DBbackups\MyDataBase1.bak' 
WITH NOFORMAT, INIT,  NAME = N'MyDataBase1 Backup', SKIP, NOREWIND, NOUNLOAD,  STATS = 10

BACKUP DATABASE MyDataBase2 TO  DISK = N'D:\DBbackups\MyDataBase2.bak' 
WITH NOFORMAT, INIT,  NAME = N'MyDataBase2 Backup', SKIP, NOREWIND, NOUNLOAD,  STATS = 10

GO

AFAIK you cannot do it with linear layouts, you'll have to go for a RelativeLayout.

By using ''.join

list1 = ['1', '2', '3']
str1 = ''.join(list1)

Or if the list is of integers, convert the elements before joining them.

list1 = [1, 2, 3]
str1 = ''.join(str(e) for e in list1)

you have to split the datetime and then store it with your desired format like dd/MM/yyyy. then you can use this query with between but i have objection using this becasue it will search every single data on your database,so i suggest you can use datediff.

        Dim start = txtstartdate.Text.Trim()
        Dim endday = txtenddate.Text.Trim()
        Dim arr()
        arr = Split(start, "/")
        Dim dt As New DateTime
        dt = New Date(Val(arr(2).ToString), Val(arr(1).ToString), Val(arr(0).ToString))
        Dim arry()
        arry = Split(endday, "/")
        Dim dt2 As New DateTime
        dt2 = New Date(Val(arry(2).ToString), Val(arry(1).ToString), Val(arry(0).ToString))

        qry = "SELECT * FROM [calender] WHERE datediff(day,'" & dt & "',[date])>=0 and datediff(day,'" & dt2 & "',[date])<=0 "

here i have used dd/MM/yyyy format.

The documentation for css() says that setting the style property to the empty string will remove that property if it does not reside in a stylesheet:

Setting the value of a style property to an empty string — e.g. $('#mydiv').css('color', '') — removes that property from an element if it has already been directly applied, whether in the HTML style attribute, through jQuery's .css() method, or through direct DOM manipulation of the style property. It does not, however, remove a style that has been applied with a CSS rule in a stylesheet or <style> element.

Since your styles are inline, you can write:

$(selector).css("-moz-user-select", "");

Since you're accessing a web.config you should probably use

using System.Web.Configuration;

WebConfigurationManager.AppSettings["configFile"]

I try GET 'http://example.com/?var=value' Important use ' add >/dev/null 2>&1 for not send email when this activate Sorry for my English

MIME stands for Multi-purpose Internet Mail Extensions. MIME types form a standard way of classifying file types on the Internet. Internet programs such as Web servers and browsers all have a list of MIME types, so that they can transfer files of the same type in the same way, no matter what operating system they are working in.

A MIME type has two parts: a type and a subtype. They are separated by a slash (/). For example, the MIME type for Microsoft Word files is application and the subtype is msword. Together, the complete MIME type is application/msword.

Although there is a complete list of MIME types, it does not list the extensions associated with the files, nor a description of the file type. This means that if you want to find the MIME type for a certain kind of file, it can be difficult. Sometimes you have to look through the list and make a guess as to the MIME type of the file you are concerned with.

Yes, on the server side $_SERVER['DOCUMENT_ROOT'] is equivalent to / on the client side.

For example: the value of "{$_SERVER['DOCUMENT_ROOT']}/images/thumbnail.png" will be the string /var/www/html/images/thumbnail.png on a server where it's local file at that path can be reached from the client side at the url http://example.com/images/thumbnail.png

No, in other words the value of $_SERVER['DOCUMENT_ROOT'] is not / rather it is the server's local path to what the server shows the client at example.com/

note: $_SERVER['DOCUMENT_ROOT'] does not include a trailing /

I don't think that IDE is relevant here. After all you're running a Maven and Maven doesn't have a source that will allow to compile the diamond operators. So, I think you should configure maven-compiler-plugin itself.

You can read about this here. But in general try to add the following properties:

<properties>
 <maven.compiler.source>1.8</maven.compiler.source>
 <maven.compiler.target>1.8</maven.compiler.target>
</properties>

and see whether it compiles now in Maven only.

You have to first convert your object literal to a Prototype Hash:

// Store your object literal
var obj = {foo: 1, bar: 2, barobj: {75: true, 76: false, 85: true}}

// Iterate like so.  The $H() construct creates a prototype-extended Hash.
$H(obj).each(function(pair){
  alert(pair.key);
  alert(pair.value);
});

Use

[A-Z]?

to make the letter optional. {1} is redundant. (Of course you could also write [A-Z]{0,1} which would mean the same, but that's what the ? is there for.)

You could improve your regex to

^([0-9]{5})+\s+([A-Z]?)\s+([A-Z])([0-9]{3})([0-9]{3})([A-Z]{3})([A-Z]{3})\s+([A-Z])[0-9]{3}([0-9]{4})([0-9]{2})([0-9]{2})

And, since in most regex dialects, \d is the same as [0-9]:

^(\d{5})+\s+([A-Z]?)\s+([A-Z])(\d{3})(\d{3})([A-Z]{3})([A-Z]{3})\s+([A-Z])\d{3}(\d{4})(\d{2})(\d{2})

But: do you really need 11 separate capturing groups? And if so, why don't you capture the fourth-to-last group of digits?

You can find your Arduino via Terminal with

 ls /dev/tty.*

then you can read that serial port using the screen command, like this

screen /dev/tty.[yourSerialPortName] [yourBaudRate]

for example:

screen /dev/tty.usbserial-A6004byf 9600

you can try and solve using css only. by adding class to select

select{ width:80px;text-overflow:'...';-ms-text-overflow:ellipsis;position:absolute; z-index:+1;}
select:focus{ width:100%;}

for more reference List Box Style in a particular item (option) HTML

Multi Select List Box

Or use the XmlSerializer class.

XmlSerializer xs = new XmlSerializer(objectType);
obj = xs.Deserialize(new StringReader(yourXmlString));

You can use the spread operator:

 <button style={{...styles.panel.button,...styles.panel.backButton}}>Back</button

Just add some headers before sending mail:

<?php 
$name = $_POST['name'];
$email = $_POST['email'];
$message = $_POST['message'];
$from = 'From: yoursite.com'; 
$to = '[email protected]'; 
$subject = 'Customer Inquiry';
$body = "From: $name\n E-Mail: $email\n Message:\n $message";

$headers .= "MIME-Version: 1.0\r\n";
$headers .= "Content-type: text/html\r\n";
$headers .= 'From: [email protected]' . "\r\n" .
'Reply-To: [email protected]' . "\r\n" .
'X-Mailer: PHP/' . phpversion();

mail($to, $subject, $message, $headers);

And one more thing. The mail() function is not working in localhost. Upload your code to a server and try.

Firstly, using on* attributes to add event handlers is a very outdated way of achieving what you want. As you've tagged your question with jQuery, here's a jQuery implementation:

<div id="foo">hello world!</div>
<img src="zoom.png" id="image" />

$('#image').click(function() {
    $('#foo').css({
        'background-color': 'red',
        'color': 'white',
        'font-size': '44px'
    });
});

A more efficient method is to put those styles into a class, and then add that class onclick, like this:

$('#image').click(function() {
  $('#foo').addClass('myClass');
});

.myClass {
  background-color: red;
  color: white;
  font-size: 44px;
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.2.1/jquery.min.js"></script>
<div id="foo">hello world!</div>
<img src="https://i.imgur.com/9zbkKVz.png?1" id="image" />

Here's a plain Javascript implementation of the above for those who require it:

document.querySelector('#image').addEventListener('click', () => {
  document.querySelector('#foo').classList.add('myClass');
}); 

.myClass {
  background-color: red;
  color: white;
  font-size: 44px;
}

<div id="foo">hello world!</div>
<img src="https://i.imgur.com/9zbkKVz.png?1" id="image" />

increase the response.getBufferSize() get the buffer size and compare with the bytes you want to transfer !

JupyterLab ToC instructions

There are already many good answers to this question, but they often require tweaks to work properly with notebooks in JupyterLab. I wrote this answer to detail the possible ways of including a ToC in a notebook while working in and exporting from JupyterLab.

As a side panel

The jupyterlab-toc extension adds the ToC as a side panel that can number headings, collapse sections, and be used for navigation (see gif below for a demo). This extension is included by default since JupyterLab 3.0, in older version you can install it with the following command

jupyter labextension install @jupyterlab/toc

In the notebook as a cell

At the time being, this can either be done manually as in Matt Dancho's answer, or automatically via the toc2 jupyter notebook extension in the classic notebook interface.

First, install toc2 as part of the jupyter_contrib_nbextensions bundle:

conda install -c conda-forge jupyter_contrib_nbextensions

Then, launch JupyterLab, go to Help --> Launch Classic Notebook, and open the notebook in which you want to add the ToC. Click the toc2 symbol in the toolbar to bring up the floating ToC window (see the gif below if you can't find it), click the gear icon and check the box for "Add notebook ToC cell". Save the notebook and the ToC cell will be there when you open it in JupyterLab. The inserted cell is a markdown cell with html in it, it will not update automatically.

The default options of the toc2 can be configured in the "Nbextensions" tab in the classic notebook launch page. You can e.g. choose to number headings and to anchor the ToC as a side bar (which I personally think looks cleaner).

In an exported HTML file

nbconvert can be used to export notebooks to HTML following rules of how to format the exported HTML. The toc2 extension mentioned above adds an export format called html_toc, which can be used directly with nbconvert from the command line (after the toc2 extension has been installed):

jupyter nbconvert file.ipynb --to html_toc
# Append `--ExtractOutputPreprocessor.enabled=False`
# to get a single html file instead of a separate directory for images

Remember that shell commands can be added to notebook cells by prefacing them with an exclamation mark !, so you can stick this line in the last cell of the notebook and always have an HTML file with a ToC generated when you hit "Run all cells" (or whatever output you desire from nbconvert). This way, you could use jupyterlab-toc to navigate the notebook while you are working, and still get ToCs in the exported output without having to resort to using the classic notebook interface (for the purists among us).

Note that configuring the default toc2 options as described above, will not change the format of nbconver --to html_toc. You need to open the notebook in the classic notebook interface for the metadata to be written to the .ipynb file (nbconvert reads the metadata when exporting) Alternatively, you can add the metadata manually via the Notebook tools tab of the JupyterLab sidebar, e.g. something like:

    "toc": {
        "number_sections": false,
        "sideBar": true
    }

If you prefer a GUI-driven approach, you should be able to open the classic notebook and click File --> Save as HTML (with ToC) (although note that this menu item was not available for me).

The gifs above are linked from the respective documentation of the extensions.

and/or are for control flow.

Ruby will not allow this as valid syntax:

false || raise "Error"

However this is valid:

false or raise "Error"

You can make the first work, with () but using or is the correct method.

false || (raise "Error")

I couldn't get the accepted answer to work using the Netbeans IDE "Create Table" GUI, and I'm on Netbeans 8.2. To get it to working, create the id column with the following options e.g.

and then use 'New Entity Classes from Database' option to generate the entity for the table (I created a simple table called PERSON with an ID column created exactly as above and a NAME column which is simple varchar(255) column). These generated entities leave it to the user to add the auto generated id mechanism.

GENERATION.AUTO seems to try and use sequences which Derby doesn't seem to like (error stating failed to generate sequence/sequence does not exist), GENERATION.SEQUENCE therefore doesn't work either, GENERATION.IDENTITY doesn't work (get error stating ID is null), so that leaves GENERATION.TABLE.

Set your persistence unit's 'Table Generation Strategy' button to Create. This will create tables that don't exist in the DB when your jar is run (loaded?) i.e. the table your PU needs to create in order to store ID increments. In your entity replace the generated annotations above your id field with the following...

I also created a controller for my entity class using 'JPA Controller Classes from Entity Classes' option. I then create a simple main class to test the id was auto generated i.e.

The result is that the PERSON_ID_TABLE is generated correctly and my PERSON table has two PERSON entries in it with correct, auto generated ids.

I found very nice solution. Microsoft released a beta version of Entity Framework Power Tools: Entity Framework Power Tools Beta 2

There you can generate POCO classes, derived DbContext and Code First mapping for an existing database in some clicks. It is very nice!

After installation some context menu options would be added to your Visual Studio.

Right-click on a C# project. Choose Entity Framework-> Reverse Engineer Code First (Generates POCO classes, derived DbContext and Code First mapping for an existing database):

Then choose your database and click OK. That's all! It is very easy.

Another way of achieving it would be to temporary edit the gitignore file, add the file and then revert back the gitignore. A bit hacky i feel

Note for MySQL 8 it's different

You need to do it in two steps:

CREATE USER 'readonly_user'@'localhost' IDENTIFIED BY 'some_strong_password';
GRANT SELECT, SHOW VIEW ON *.* TO 'readonly_user'@'localhost';
flush privileges;

This is how it would be done in a loop in C++(11):

   for (const auto& attack : m_attack)
    {  
        if (attack->m_num == input)
        {
            attack->makeDamage();
        }
    }

There is no for each in C++. Another option is to use std::for_each with a suitable functor (this could be anything that can be called with an Attack* as argument).

I have the same question but cannot ask it because it would be a duplicate.

The accepted answer, using exit, does not work when the script is a bit more complicated. If you use a background process to check for the condition, exit only exits that process, as it runs in a sub-shell. To kill the script, you have to explicitly kill it (at least that is the only way I know).

Here is a little script on how to do it:

#!/bin/bash

boom() {
    while true; do sleep 1.2; echo boom; done
}

f() {
    echo Hello
    N=0
    while
        ((N++ <10))
    do
        sleep 1
        echo $N
        #        ((N > 5)) && exit 4 # does not work
        ((N > 5)) && { kill -9 $$; exit 5; } # works 
    done
}

boom &
f &

while true; do sleep 0.5; echo beep; done

This is a better answer but still incomplete a I really don't know how to get rid of the boom part.

Improving upon @Ianl's answer,

It seems that if 2-step authentication is enabled, you have to use token instead of password. You could generate a token here.

If you want to disable the prompts for both the username and password then you can set the URL as follows -

git remote set-url origin https://username:[email protected]/WEMP/project-slideshow.git

Note that the URL has both the username and password. Also the .git/config file should show your current settings.

Update 20200128:

If you don't want to store the password in the config file, then you can generate your personal token and replace the password with the token. Here are some details.

It would look like this -

git remote set-url origin https://username:[email protected]/WEMP/project-slideshow.git

<select name="selectedFacilityId" ng-model="selectedFacilityId">
         <option ng-repeat="facility in facilities" value="{{facility.id}}">{{facility.name}}</option>
     </select>  

This is an example on how to use it.

For example, if you want an array of int pointers it will be int* a[10]. It means that variable a is a collection of 10 int* s.

EDIT

I guess this is what you want to do:

class Bar
{
};

class Foo
{
public:

    //Takes number of bar elements in the pointer array
    Foo(int size_in);

    ~Foo();
    void add(Bar& bar);
private:

    //Pointer to bar array
    Bar** m_pBarArr;

    //Current fee bar index
    int m_index;
};

Foo::Foo(int size_in) : m_index(0)
{
    //Allocate memory for the array of bar pointers
    m_pBarArr = new Bar*[size_in];
}

Foo::~Foo()
{
    //Notice delete[] and not delete
    delete[] m_pBarArr;
    m_pBarArr = NULL;
}

void Foo::add(Bar &bar)
{
    //Store the pointer into the array. 
    //This is dangerous, you are assuming that bar object
    //is valid even when you try to use it
    m_pBarArr[m_index++] = &bar;
}

If you are like me whose Java Control Panel does not show Security slider under Security Tab to change security level from High to Medium then follow these instructions: Java known bug: security slider not visible.

Symptoms:

After installation, the checkbox to enable/disable Java and the security level slider do not appear in the Java Control Panel Security tab. This can occur with 7u10 and above.

Cause

This is due to a conflict that Java 7u10 and above have with standalone installations of JavaFX. Example: If Java 7u5 and JavaFX 2.1.1 are installed and if Java is updated to 7u11, the Java Control Panel does not show the checkbox or security slider.

Resolution

It is recommended to uninstall all versions of Java and JavaFX before installing Java 7u10 and above.
Please follow the steps below for resolving this issue.
1. Remove all versions of Java and JavaFX through the Windows Uninstall Control Panel. Instructions on uninstalling Java.
2. Run the Microsoft uninstall utility to repair corrupted registry keys that prevents programs from being completely uninstalled or blocking new installations and updates.
3. Download and install the Windows offline installer package.

I had the similar issue. The problem was in the passwords: the Keystore and private key used different passwords. (KeyStore explorer was used)

After creating Keystore with the same password as private key had the issue was resolved.

To do POST you'll need to have a form.

<form action="employee.action" method="post">
    <input type="submit" value="Employee1" />
</form>

There are some ways to post data with hyperlinks, but you'll need some javascript, and a form.

Some tricks: Make a link use POST instead of GET and How do you post data with a link

Edit: to load response on a frame you can target your form to your frame:

<form action="employee.action" method="post" target="myFrame">

Look for this on your Manifest.xml android:icon="@drawable/ic_launcher" then change the ic_launcher to the name of your icon which is on your @drawable folder.

You are looking for --build-arg and the ARG instruction. These are new as of Docker 1.9. Check out https://docs.docker.com/engine/reference/builder/#arg. This will allow you to add ARG arg to the Dockerfile and then build with docker build --build-arg arg=2.3 ..

If you really don't like the Terminal here is the GUI way to do dkamins is telling you :

1) Go to your user home directory (ludo would be mine) and from the File menu choose Get Info cmdI in the inspector :

2) By alt/option clicking on the [+] sign add the _www group and set it's permission to read-only :

• Thus consider (good practice) not storing personnal information at the root of your user home folder (& hard disk) !
• You may skip this step if the **everyone** group has **read-only** permission but since AirDrop the **/Public/Drop Box** folder is mostly useless...

3) Show the Get Info inspector of your user Sites folder and reproduce step 2 then from the gear action sub-menu choose Apply to enclosed Items... :

Voilà 3 steps and the GUI only way...

Assuming you have the public keys inside X.509 certificates, and assuming they are RSA keys, then for each public key, do

    openssl x509 -in certfile -modulus -noout

For each private key, do

    openssl rsa -in keyfile -modulus -noout

Then match the keys by modulus.

You can use the key parameter to list.sort():

my_list.sort(key=lambda x: x[1])

or, slightly faster,

my_list.sort(key=operator.itemgetter(1))

(As with any module, you'll need to import operator to be able to use it.)

You can use SSH and SFTP as suggested here.

1. In the Guest OS (Mac OS X), open System Preferences > Sharing, then activate Remote Login; note the ip address specified in the Remote Login instructions, e.g. ssh [email protected]
2. In VirtualBox, open Devices > Network > Network Settings > Advanced > Port Forwarding and specify Host IP = 127.0.0.1, Host Port 2222, Guest IP 10.0.2.15, Guest Port 22
3. On the Host OS, run the following command sftp -P 2222 [email protected]; if you prefer a graphical interface, you can use FileZilla

Replace user and 10.0.2.15 with the appropriate values relevant to your configuration.

If disk 'local' is not working for you then try this :

1. Change local to public in 'default' => env('FILESYSTEM_DRIVER', 'public'), from project_folder/config/filesystem.php
2. Clear config cache php artisan config:clear
3. Then create sym link php artisan storage:link

To get url of uploaded image you can use this Storage::url('iamge_name.jpg');

Have you tried the solution suggested on the MSDN Forum "Windows Forms General" which simply subclasses TextBox?

your description is rather confusing; directly concatenating the decimal values doesn't seem useful in most contexts. the following code will cast each letter to an 8-bit character, and THEN concatenate. this is how standard ASCII encoding works

def ASCII(s):
    x = 0
    for i in xrange(len(s)):
        x += ord(s[i])*2**(8 * (len(s) - i - 1))
    return x

I spotted half of the problem: I can't use the 'indexer' notation to objects (my_object[0]). Is there a way to bypass it?

No; an object literal, as the name implies, is an object, and not an array, so you cannot simply retrieve a property based on an index, since there is no specific order of their properties. The only way to retrieve their values is by using the specific name:

var someVar = options.filters.firstName; //Returns 'abc'

Or by iterating over them using the for ... in loop:

for(var p in options.filters) {
    var someVar = options.filters[p]; //Returns the property being iterated
}

The Eclipse team with The Open University have prepared the following document, which includes creating proxy classes with tests. It might be what you are looking for.

http://www.eclipse.org/webtools/community/education/web/t320/Generating_a_client_from_WSDL.pdf

Everything is included in the Dynamic Web Project template.

In the project create a Web Service Client. This starts a wizard that has you point out a wsdl url and creates the client with tests for you.

The user guide (targeted at indigo though) for this task is found at http://help.eclipse.org/indigo/index.jsp?topic=%2Forg.eclipse.jst.ws.cxf.doc.user%2Ftasks%2Fcreate_client.html.

It's been a few years, and Chrome at least makes use of this attribute. This attribute is very useful from a usability standpoint as it will filter out the unnecessary files for the user, making their experience smoother. However, the user can still select "all files" from the type (or otherwise bypass the filter), thus you should always validate the file where it is actually used; If you're using it on the server, validate it there before using it. The user can always bypass any client-side scripting.

not that hard,

if you take a look at the page source, you'll see that it uses to stream the audio via shoutcast.

this is the stream url

"StreamUrl": "http://stream.radiotime.com/listen.stream?streamIds=3244651&rti=c051HQVbfRc4FEMbKg5RRVMzRU9KUBw%2fVBZHS0dPF1VIExNzJz0CGQtRcX8OS0o0CUkYRFJDDW8LEVRxGAEOEAcQXko%2bGgwSBBZrV1pQZgQZZxkWCA4L%7e%7e%7e",

which returns a JSON like that:

{
    "Streams": [
        {
            "StreamId": 3244651,
            "Reliability": 92,
            "Bandwidth": 64,
            "HasPlaylist": false,
            "MediaType": "MP3",
            "Url": "http://mp3hdfm32.hala.jo:8132",
            "Type": "Live"
        }
    ]
}

i believe that's the url you need: http://mp3hdfm32.hala.jo:8132

this is the station WebSite

If you want to do an executable jar file, them need set the main class too. So the full configuration should be.

    <plugins>
            <plugin>
                 <artifactId>maven-assembly-plugin</artifactId>
                 <executions>
                     <execution>
                          <phase>package</phase>
                          <goals>
                              <goal>single</goal>
                          </goals>
                      </execution>
                  </executions>
                  <configuration>
                       <!-- ... -->
                       <archive>
                           <manifest>
                                 <mainClass>fully.qualified.MainClass</mainClass>
                           </manifest>
                       </archive>
                       <descriptorRefs>
                           <descriptorRef>jar-with-dependencies</descriptorRef>
                      </descriptorRefs>
                 </configuration>
         </plugin>
   </plugins>

These instructions explain how to install a python2 and python3 kernel in separate virtual environments for non-anaconda users. If you are using anaconda, please find my other answer for a solution directly tailored to anaconda.

I assume that you already have jupyter notebook installed.

First make sure that you have a python2 and a python3 interpreter with pip available.

On ubuntu you would install these by:

sudo apt-get install python-dev python3-dev python-pip python3-pip

Next prepare and register the kernel environments

python -m pip install virtualenv --user

# configure python2 kernel
python -m virtualenv -p python2 ~/py2_kernel
source ~/py2_kernel/bin/activate
python -m pip install ipykernel
ipython kernel install --name py2 --user
deactivate

# configure python3 kernel
python -m virtualenv -p python3 ~/py3_kernel
source ~/py3_kernel/bin/activate
python -m pip install ipykernel
ipython kernel install --name py3 --user
deactivate

To make things easier, you may want to add shell aliases for the activation command to your shell config file. Depending on the system and shell you use, this can be e.g. ~/.bashrc, ~/.bash_profile or ~/.zshrc

alias kernel2='source ~/py2_kernel/bin/activate'
alias kernel3='source ~/py3_kernel/bin/activate'

After restarting your shell, you can now install new packages after activating the environment you want to use.

kernel2
python -m pip install <pkg-name>
deactivate

or

kernel3
python -m pip install <pkg-name>
deactivate

You can put the property with null as a default value and if you don't pass the parameter it will not be interpreted.

@mixin box-shadow($top, $left, $blur, $color, $inset:null) {
  -webkit-box-shadow: $top $left $blur $color $inset;
  -moz-box-shadow:    $top $left $blur $color $inset;
  box-shadow:         $top $left $blur $color $inset;
}

This means you can write the include statement like this.

@include box-shadow($top, $left, $blur, $color);

Instead of writing it like this.

@include box-shadow($top, $left, $blur, $color, null);

As shown in the answer here

A minor edition to @sastanin's solution, so that it can deal with newlines within quotes.

std::vector<std::vector<std::string>> readCSV(std::istream &in) {
    std::vector<std::vector<std::string>> table;

    while (!in.eof()) {
        CSVState state = CSVState::UnquotedField;
        std::vector<std::string> fields {""};
        size_t i = 0; // index of the current field
        for (char c : row) {
            switch (state) {
                case CSVState::UnquotedField:
                    switch (c) {
                        case ',': // end of field
                                  fields.push_back(""); i++;
                                  break;
                        case '"': state = CSVState::QuotedField;
                                  break;
                        default:  fields[i].push_back(c);
                                  break; }
                    break;
                case CSVState::QuotedField:
                    switch (c) {
                        case '"': state = CSVState::QuotedQuote;
                                  break;
                        default:  fields[i].push_back(c);
                                  break; }
                    break;
                case CSVState::QuotedQuote:
                    switch (c) {
                        case ',': // , after closing quote
                                  fields.push_back(""); i++;
                                  state = CSVState::UnquotedField;
                                  break;
                        case '"': // "" -> "
                                  fields[i].push_back('"');
                                  state = CSVState::QuotedField;
                                  break;
                        case '\n': // newline
                                  table.push_back(fields);
                                  state = CSVState::UnquotedField;
                                  fields = vector<string>{""};
                                  i = 0;
                        default:  // end of quote
                                  state = CSVState::UnquotedField;
                                  break; }
                    break;
            }
        }
    }
    return table;
}

Definitely works.

if [[ `pgrep -f $0` != "$$" ]]; then
        echo "Exiting ! Exist"
        exit
fi

shuf -i 2000-65000 -n 1

Enjoy!

Edit: The range is inclusive.

The table normally contains multiple rows. Use a loop and use row.Field<string>(0) to access the value of each row.

foreach(DataRow row in dt.Rows)
{
    string file = row.Field<string>("File");
}

You can also access it via index:

foreach(DataRow row in dt.Rows)
{
    string file = row.Field<string>(0);
}

If you expect only one row, you can also use the indexer of DataRowCollection:

string file = dt.Rows[0].Field<string>(0); 

Since this fails if the table is empty, use dt.Rows.Count to check if there is a row:

if(dt.Rows.Count > 0)
    file = dt.Rows[0].Field<string>(0);

Or simply add one line of:

Text='<%# Eval("Comments").ToString().Replace("\n","<br />") %>'

Another consideration is the exit code to return. Just "1" is pretty standard, although there are a handful of reserved exit codes that bash itself uses, and that same page argues that user-defined codes should be in the range 64-113 to conform to C/C++ standards.

You might also consider the bit vector approach that mount uses for its exit codes:

 0  success
 1  incorrect invocation or permissions
 2  system error (out of memory, cannot fork, no more loop devices)
 4  internal mount bug or missing nfs support in mount
 8  user interrupt
16  problems writing or locking /etc/mtab
32  mount failure
64  some mount succeeded

OR-ing the codes together allows your script to signal multiple simultaneous errors.

Only throw an exception if it is truly an error. If it is expected behavior for the object to not exist, return the null.

Otherwise it is a matter of preference.

For me, it didn't work without enctype: 'multipart/form-data' field in the Ajax request. I hope it helps someone who is stuck in a similar problem.

Even though the enctype was already set in the form attribute, for some reason, the Ajax request didn't automatically identify the enctype without explicit declaration (jQuery 3.3.1).

// Tested, this works for me (jQuery 3.3.1)

fileUploadForm.submit(function (e) {   
    e.preventDefault();
    $.ajax({
            type: 'POST',
            url: $(this).attr('action'),
            enctype: 'multipart/form-data',
            data: new FormData(this),
            processData: false,
            contentType: false,
            success: function (data) {
                console.log('Thank God it worked!');
            }
        }
    );
});

// enctype field was set in the form but Ajax request didn't set it by default.

<form action="process/file-upload" enctype="multipart/form-data" method="post" >

     <input type="file" name="input-file" accept="text/plain" required> 
     ...
</form>

As others mentioned above, please also pay special attention to the contentType and processData fields.

Try this:

"dependencies" : {
  "name1" : "git://github.com/user/project.git#commit-ish",
  "name2" : "git://github.com/user/project.git#commit-ish"
}

You could also try this, where visionmedia/express is name/repo:

"dependencies" : {
   "express" : "visionmedia/express"
}

Or (if the npm package module exists):

"dependencies" : {
  "name": "*"
}

Taken from NPM docs

You can easily solve that in 2 steps:

1- Reach the child element using querySelector like that: var target = element[0].querySelector('tbody tr:first-child td')

2- Transform it to an angular.element object again by doing: var targetElement = angular.element(target)

You will then have access to all expected methods on the targetElement variable.

You need to use the jQuery AJAX or XMLHttpRequest() for post the data to the server. After data posting you can redirect your page to another page by window.location.href.

Example:

 var xhttp = new XMLHttpRequest();
  xhttp.onreadystatechange = function() {
    if (this.readyState == 4 && this.status == 200) {
      window.location.href = 'https://website.com/my-account';
    }
  };
  xhttp.open("POST", "demo_post.asp", true);
  xhttp.send();

Use Scalar::Util::looks_like_number() which uses the internal Perl C API's looks_like_number() function, which is probably the most efficient way to do this. Note that the strings "inf" and "infinity" are treated as numbers.

Example:

#!/usr/bin/perl

use warnings;
use strict;

use Scalar::Util qw(looks_like_number);

my @exprs = qw(1 5.25 0.001 1.3e8 foo bar 1dd inf infinity);

foreach my $expr (@exprs) {
    print "$expr is", looks_like_number($expr) ? '' : ' not', " a number\n";
}

Gives this output:

1 is a number
5.25 is a number
0.001 is a number
1.3e8 is a number
foo is not a number
bar is not a number
1dd is not a number
inf is a number
infinity is a number

See also:

• perldoc Scalar::Util
• perldoc perlapi for looks_like_number

try giving border in % for exapmle 0.1% according to your need.

Should work:

In [1]: price = 1*9

In [2]: price
Out[2]: 9

In my case, I was getting this error because I had an input named x and I was creating (without realizing it) a local variable called x. I thought I was trying to access an element of the input x (which was an array), while I was actually trying to access an element of the local variable x (which was a scalar).

Put a Console.Read() as the last line in your program. That will prevent it from closing until you press a key

static void Main(string[] args)
{
    StringAddString s = new StringAddString();
    Console.Read();            
}

The following is a way to achieve a fixed header table, I don't know if it will be enough for your purpose. Changes are:

1. use "bScrollCollapse" instead of "sScrollXInner"
2. don't use fieldset to wrap table
3. add a "div.box" css class

It seems fully working on my local machine, but it's not fully working using Fiddle. It seems that Fiddle adds a css file (normalize.css) that in some way broke the plugin css (quite sure I can make fully working also in Fiddle adding some css clear rules, but not have time to investigate further now)

My working code snippet is below. Hope this can help.

<!DOCTYPE html>
<html>
<head>
  <meta http-equiv="content-type" content="text/html; charset=UTF-8">

  <script type='text/javascript' src='http://code.jquery.com/jquery-1.8.2.js'></script>
  <script type='text/javascript' src="http://datatables.net/release-datatables/media/js/jquery.dataTables.min.js"></script>

 <style type='text/css'>
       div.box {
       height: 100px;
       padding: 10px;
       overflow: auto;
       border: 1px solid #8080FF;
       background-color: #E5E5FF;
   }

  .standard-grid1, .standard-grid1 td, .standard-grid1 th {
    border: solid black thin;
   }
</style>

<script type='text/javascript'> 
$(window).load(function(){
$(document).ready(function() {
    var stdTable1 = $(".standard-grid1").dataTable({
        "iDisplayLength": -1,
        "bPaginate": true,
        "iCookieDuration": 60,
        "bStateSave": false,
        "bAutoWidth": false,
        //true
        "bScrollAutoCss": true,
        "bProcessing": true,
        "bRetrieve": true,
        "bJQueryUI": true,
        "sDom": '<"H"CTrf>t<"F"lip>',
        "aLengthMenu": [[25, 50, 100, -1], [25, 50, 100, "All"]],
        "sScrollX": "100%",
        //"sScrollXInner": "110%",
        "bScrollCollapse": true,
        "fnInitComplete": function() {
            this.css("visibility", "visible");
        }
    });
});
});

</script>


</head>
<body>
<div>
    <table class="standard-grid1 full-width content-scrollable" id="PeopleIndexTable">
        <thead>
          <!-- put your table header HTML here -->
       </thead>
       <tbody>
          <!-- put your table body HTML here -->
        </tbody>
    </table>
</div>
</body>
</html>

i was facing the similar issue and i resolved by using following code

$(document).on('click', 'a.page-scroll', function(event) {
        var $anchor = $(this);
        var desiredHeight = $(window).height() - 577;
        $('html, body').stop().animate({
            scrollTop: $($anchor.attr('href')).offset().top - desiredHeight
        }, 1500, 'easeInOutExpo');
        event.preventDefault();
    });

You are trying to assign a value to a function, which is not possible in C. Try the comparison operator instead:

if (strcmp("hello", "hello") == 0)

You can simply append the value of argv[1] to argv and then check if argv[1] doesn't equal the string you inputted Example:

from sys import argv
argv.append('SomeString')
if argv[1]!="SomeString":
            print(argv[1])

Apart from the IE conditional comments, this is an updated list on how to target IE6 to IE10.

See specific CSS & JS hacks beyond IE.

/***** Attribute Hacks ******/

/* IE6 */
#once { _color: blue }

/* IE6, IE7 */
#doce { *color: blue; /* or #color: blue */ }

/* Everything but IE6 */
#diecisiete { color/**/: blue }

/* IE6, IE7, IE8, but also IE9 in some cases :( */
#diecinueve { color: blue\9; }

/* IE7, IE8 */
#veinte { color/*\**/: blue\9; }

/* IE6, IE7 -- acts as an !important */
#veintesiete { color: blue !ie; } /* string after ! can be anything */

/* IE8, IE9 */
#anotherone  {color: blue\0/;} /* must go at the END of all rules */

/* IE9, IE10, IE11 */
@media screen and (min-width:0\0) {
    #veintidos { color: red}
}


/***** Selector Hacks ******/

/* IE6 and below */
* html #uno  { color: red }

/* IE7 */
*:first-child+html #dos { color: red }

/* IE8 (Everything but IE 6,7) */
html>/**/body #cuatro { color: red }

/* Everything but IE6-8 */
:root *> #quince { color: red  }

/* IE7 */
*+html #dieciocho {  color: red }

/* IE 10+ */
@media screen and (-ms-high-contrast: active), (-ms-high-contrast: none) {
   #veintiun { color: red; }
}

These are the breaking changes from Python 3.x and Python 2.x

For Python3.x use

dictlist = []
for key, value in dict.items():
    temp = [key,value]
    dictlist.append(temp)

For Python 2.7 use

dictlist = []
for key, value in dict.iteritems():
    temp = [key,value]
    dictlist.append(temp)

You need to pass an array of element to jsx. The problem is that forEach does not return anything (i.e it returns undefined). So it's better to use map because map returns an array:

class QuestionSet extends Component {
render(){ 
    <div className="container">
       <h1>{this.props.question.text}</h1>
       {this.props.question.answers.map((answer, i) => {     
           console.log("Entered");                 
           // Return the element. Also pass key     
           return (<Answer key={answer} answer={answer} />) 
        })}
}

export default QuestionSet;

In version 3 of a Docker Compose file, you can use RESTART.

For example:

docker-compose.yml

worker:
    build: myapp/.
    volumes:
    - myapp/.:/usr/src/app:ro
    restart: on-failure
    depends_on:
    - rabbitmq
rabbitmq:
    image: rabbitmq:3-management

Note that I used depends_on instead of links since the latter is deprecated in version 3.

Even though it works, it might not be the ideal solution since you restart the docker container at every failure.

Have a look to RESTART_POLICY as well. it let you fine tune the restart policy.

When you use Compose in production, it is actually best practice to use the restart policy :

Specifying a restart policy like restart: always to avoid downtime

For anyone trying to run this in nodejs: It won't work out of the box, since jquery needs a browser (or similar)! I was just trying to get the import to run and was logging console.log($) which wrote [Function] and then also console.log($.ajax) which returned undefined. I had no tsc errors and had autocomplete from intellij, so I was wondering what's going on.

Then at some point I realised that node might be the problem and not typescript. I tried the same code in the browser and it worked. To make it work you need to run:

require("jsdom").env("", function(err, window) {
    if (err) {
        console.error(err);
        return;
    }

    var $ = require("jquery")(window);
});

(credits: https://stackoverflow.com/a/4129032/3022127)

You can just use the pipe on its own:

"string1|string2"

for example:

String s = "string1, string2, string3";
System.out.println(s.replaceAll("string1|string2", "blah"));

Output:

blah, blah, string3

The main reason to use parentheses is to limit the scope of the alternatives:

String s = "string1, string2, string3";
System.out.println(s.replaceAll("string(1|2)", "blah"));

has the same output. but if you just do this:

String s = "string1, string2, string3";
System.out.println(s.replaceAll("string1|2", "blah"));

you get:

blah, stringblah, string3

because you've said "string1" or "2".

If you don't want to capture that part of the expression use ?::

String s = "string1, string2, string3";
System.out.println(s.replaceAll("string(?:1|2)", "blah"));

Well, not always. Using cookies, you are good. But the "can I safely rely on the id being present" urged me to extend the discussion with an important point (mostly for reference, as the visitor count of this page seems quite high).

PHP can be configured to maintain sessions by URL-rewriting, instead of cookies. (How it's good or bad (<-- see e.g. the topmost comment there) is a separate question, let's now stick to the current one, with just one side-note: the most prominent issue with URL-based sessions -- the blatant visibility of the naked session ID -- is not an issue with internal Ajax calls; but then, if it's turned on for Ajax, it's turned on for the rest of the site, too, so there...)

In case of URL-rewriting (cookieless) sessions, Ajax calls must take care of it themselves that their request URLs are properly crafted. (Or you can roll your own custom solution. You can even resort to maintaining sessions on the client side, in less demanding cases.) The point is the explicit care needed for session continuity, if not using cookies:

1. If the Ajax calls just extract URLs verbatim from the HTML (as received from PHP), that should be OK, as they are already cooked (umm, cookified).

2. If they need to assemble request URIs themselves, the session ID needs to be added to the URL manually. (Check here, or the page sources generated by PHP (with URL-rewriting on) to see how to do it.)

From OWASP.org:

Effectively, the web application can use both mechanisms, cookies or URL parameters, or even switch from one to the other (automatic URL rewriting) if certain conditions are met (for example, the existence of web clients without cookies support or when cookies are not accepted due to user privacy concerns).

From a Ruby-forum post:

When using php with cookies, the session ID will automatically be sent in the request headers even for Ajax XMLHttpRequests. If you use or allow URL-based php sessions, you'll have to add the session id to every Ajax request url.

<!DOCTYPE html>
<html lang="en" dir="ltr">
    <head>
        <meta charset="utf-8">
        <title>Calculator</title> 
    </head>
<body>

    <form method="GET">
    <h1>Calculator</h1>
    <p>This is a calculator made by Hau Teen Yee Fabrice and is free to use.</p>
        <ul>
     <ol> Multiplication: * </ol>
     <ol> Substraction: - </ol>
     <ol> Division: / </ol>
     <ol> Addition: + </ol>
        </ul>
     <p>Enter first number:</p>
        <input type="text" name="cal1">
        <p>Enter second number:</p>
        <input type="text" name="cal2">
        <p>Enter the calculator symbol</p>
        <input type="text" name="symbol">
        <button>Calculate</button>
    </form>
    <?php
    $cal1= $_GET['cal1'];
    $cal2= $_GET['cal2'];
    $symbol =$_GET['symbol'];

    if($symbol == '+')
    {
        $add = $cal1 + $cal2;
        echo "Addition is:".$add;
    }
    else if($symbol == '-')
    {
        $subs = $cal1 - $cal2;
        echo "Substraction is:".$subs;
    }
     else if($symbol == '*')
    {
        $mul = $cal1 * $cal2;
        echo "Multiply is:".$mul;
    }
    else if($symbol == '/')
    {
        $div = $cal1 / $cal2;
        echo "Division is:".$div;
    }
      else
    { 
        echo "Oops ,something wrong in your code son";
    }
    ?>
    </body> 
</html>

os.path.isfile("bob.txt") # Does bob.txt exist?  Is it a file, or a directory?
os.path.isdir("bob")

You can try with IME_ACTION_DONE .

This action performs a “done” operation for nothing to input and the IME will be closed.

 Your_EditTextObj.setOnEditorActionListener(new TextView.OnEditorActionListener() {
            @Override
            public boolean onEditorAction(TextView v, int actionId, KeyEvent event) {
                boolean handled = false;
                if (actionId == EditorInfo.IME_ACTION_DONE) {
                  /* Write your logic here that will be executed when user taps next button */


                    handled = true;
                }
                return handled;
            }
        });

VanillaJS is a term for library/framework free javascript.

Its sometimes ironically referred to as a library, as a joke for people who could be seen as mindlessly using different frameworks, especially jQuery.

Some people have gone so far to release this library, usually with an empty or comment-only js file.

The current documentation has a good explanation of what .NET Core is, areas to use and so on. The following characteristics best define .NET Core:

Flexible deployment: Can be included in your app or installed side-by-side user- or machine-wide.

Cross-platform: Runs on Windows, macOS and Linux; can be ported to other OSes. The supported operating systems (OSes), CPUs and application scenarios will grow over time, provided by Microsoft, other companies, and individuals.

Command-line tools: All product scenarios can be exercised at the command-line.

Compatible: .NET Core is compatible with .NET Framework, Xamarin and Mono, via the .NET Standard Library.

Open source: The .NET Core platform is open source, using MIT and Apache 2 licenses. Documentation is licensed under CC-BY. .NET Core is a .NET Foundation project.

Supported by Microsoft: .NET Core is supported by Microsoft, per .NET Core Support

And here is what .NET Core includes:

A .NET runtime, which provides a type system, assembly loading, a garbage collector, native interoperability and other basic services.

A set of framework libraries, which provide primitive data types, application composition types and fundamental utilities.

A set of SDK tools and language compilers that enable the base developer experience, available in the .NET Core SDK.

The 'dotnet' application host, which is used to launch .NET Core applications. It selects the runtime and hosts the runtime, provides an assembly loading policy and launches the app. The same host is also used to launch SDK tools in much the same way.

Don't use Rstudio to update R. Rstudio IS NOT R, Rstudio is just an IDE. This answer is a summary of previous answers for different OS. For all OS it is convenient to have a look in advance what will happen with the packages you have already installed here.

WINDOWS ->> Open CMD/Powershell as an administrator and type "R" to go into interactive mode. If this does not work, search and run RGui.exe instead of writing R in the console ...and then:

lib_path <- gsub( "/", "\\\\" , Sys.getenv("R_LIBS_USER"))
install.packages("installr", lib = lib_path)
install.packages("stringr", lib_path)
library(stringr, lib.loc = lib_path)
library(installr, lib.loc = lib_path)
installr::updateR()

MacOS ->> You can use updateR package. The package is not on CRAN, so you’ll need to run the following code in Rgui:

install.packages("devtools")
devtools::install_github("AndreaCirilloAC/updateR")
updateR(admin_password = "PASSWORD") # Where "PASSWORD" stands for your system password

Note that it is planned to merge updateR and installR in the near future to work for both Mac and Windows.

Linux ->> For the moment installr is NOT available for Linux/MacOS (see documentation for current version 0.20). As R is installed, you can follow these instructions (in Ubuntu, although the idea is the same in other distros: add the source, update and upgrade and install.)

I had the same problem and all the solutions mentioned here didn't work out for me.

After uninstalling the "Productivity Power Tools 2013" extension, the performance was back to normal.

Check out http-tool for firefox ..

https://addons.mozilla.org/en-US/firefox/addon/http-tool/

Aimed at web developers who need to debug HTTP requests and responses.
Can be extremely useful while developing REST based api.

Features:
* GET
* HEAD
* POST
* PUT
* DELETE

Add header(s) to request.
Add body content to request.

View header(s) in response.
View body content in response.
View status code of response.
View status text of response.

Best solution you have ever see.

Convert django.db.models.Model instance and all related ForeignKey, ManyToManyField and @Property function fields into dict.

"""
Convert django.db.models.Model instance and all related ForeignKey, ManyToManyField and @property function fields into dict.
Usage:
    class MyDjangoModel(... PrintableModel):
        to_dict_fields = (...)
        to_dict_exclude = (...)
        ...
    a_dict = [inst.to_dict(fields=..., exclude=...) for inst in MyDjangoModel.objects.all()]
"""
import typing

import django.core.exceptions
import django.db.models
import django.forms.models


def get_decorators_dir(cls, exclude: typing.Optional[set]=None) -> set:
    """
    Ref: https://stackoverflow.com/questions/4930414/how-can-i-introspect-properties-and-model-fields-in-django
    :param exclude: set or None
    :param cls:
    :return: a set of decorators
    """
    default_exclude = {"pk", "objects"}
    if not exclude:
        exclude = default_exclude
    else:
        exclude = exclude.union(default_exclude)

    return set([name for name in dir(cls) if name not in exclude and isinstance(getattr(cls, name), property)])


class PrintableModel(django.db.models.Model):

    class Meta:
        abstract = True

    def __repr__(self):
        return str(self.to_dict())

    def to_dict(self, fields: typing.Optional[typing.Iterable]=None, exclude: typing.Optional[typing.Iterable]=None):
        opts = self._meta
        data = {}

        # support fields filters and excludes
        if not fields:
            fields = set()
        else:
            fields = set(fields)
        default_fields = getattr(self, "to_dict_fields", set())
        fields = fields.union(default_fields)

        if not exclude:
            exclude = set()
        else:
            exclude = set(exclude)
        default_exclude = getattr(self, "to_dict_exclude", set())
        exclude = exclude.union(default_exclude)

        # support syntax "field__childField__..."
        self_fields = set()
        child_fields = dict()
        if fields:
            for i in fields:
                splits = i.split("__")
                if len(splits) == 1:
                    self_fields.add(splits[0])
                else:
                    self_fields.add(splits[0])

                    field_name = splits[0]
                    child_fields.setdefault(field_name, set())
                    child_fields[field_name].add("__".join(splits[1:]))

        self_exclude = set()
        child_exclude = dict()
        if exclude:
            for i in exclude:
                splits = i.split("__")
                if len(splits) == 1:
                    self_exclude.add(splits[0])
                else:
                    field_name = splits[0]
                    if field_name not in child_exclude:
                        child_exclude[field_name] = set()
                    child_exclude[field_name].add("__".join(splits[1:]))

        for f in opts.concrete_fields + opts.many_to_many:
            if self_fields and f.name not in self_fields:
                continue
            if self_exclude and f.name in self_exclude:
                continue

            if isinstance(f, django.db.models.ManyToManyField):
                if self.pk is None:
                    data[f.name] = []
                else:
                    result = []
                    m2m_inst = f.value_from_object(self)
                    for obj in m2m_inst:
                        if isinstance(PrintableModel, obj) and hasattr(obj, "to_dict"):
                            d = obj.to_dict(
                                fields=child_fields.get(f.name),
                                exclude=child_exclude.get(f.name),
                            )
                        else:
                            d = django.forms.models.model_to_dict(
                                obj,
                                fields=child_fields.get(f.name),
                                exclude=child_exclude.get(f.name)
                            )
                        result.append(d)
                    data[f.name] = result
            elif isinstance(f, django.db.models.ForeignKey):
                if self.pk is None:
                    data[f.name] = []
                else:
                    data[f.name] = None
                    try:
                        foreign_inst = getattr(self, f.name)
                    except django.core.exceptions.ObjectDoesNotExist:
                        pass
                    else:
                        if isinstance(foreign_inst, PrintableModel) and hasattr(foreign_inst, "to_dict"):
                            data[f.name] = foreign_inst.to_dict(
                                fields=child_fields.get(f.name),
                                exclude=child_exclude.get(f.name)
                            )
                        elif foreign_inst is not None:
                            data[f.name] = django.forms.models.model_to_dict(
                                foreign_inst,
                                fields=child_fields.get(f.name),
                                exclude=child_exclude.get(f.name),
                            )

            elif isinstance(f, (django.db.models.DateTimeField, django.db.models.DateField)):
                v = f.value_from_object(self)
                if v is not None:
                    data[f.name] = v.isoformat()
                else:
                    data[f.name] = None
            else:
                data[f.name] = f.value_from_object(self)

        # support @property decorator functions
        decorator_names = get_decorators_dir(self.__class__)
        for name in decorator_names:
            if self_fields and name not in self_fields:
                continue
            if self_exclude and name in self_exclude:
                continue

            value = getattr(self, name)
            if isinstance(value, PrintableModel) and hasattr(value, "to_dict"):
                data[name] = value.to_dict(
                    fields=child_fields.get(name),
                    exclude=child_exclude.get(name)
                )
            elif hasattr(value, "_meta"):
                # make sure it is a instance of django.db.models.fields.Field
                data[name] = django.forms.models.model_to_dict(
                    value,
                    fields=child_fields.get(name),
                    exclude=child_exclude.get(name),
                )
            elif isinstance(value, (set, )):
                data[name] = list(value)
            else:
                data[name] = value

        return data

https://gist.github.com/shuge/f543dc2094a3183f69488df2bfb51a52

In my opinion, it's much cleaner and easier to understand if you extract the retrieval of environment variables into a utility (you probably want to include a check to fail fast if an environment variable is not set anyway), and then you can just mock the utility.

// util.js
exports.getEnv = (key) => {
    const value = process.env[key];
    if (value === undefined) {
      throw new Error(`Missing required environment variable ${key}`);
    }
    return value;
};

// app.test.js
const util = require('./util');
jest.mock('./util');

util.getEnv.mockImplementation(key => `fake-${key}`);

test('test', () => {...});

if you have multiple webview, localstorage does not work correctly.
two suggestion:

1. using java database instead webview localstorage that " @Guillaume Gendre " explained.(of course it does not work for me)
2. local storage work like json,so values store as "key:value" .you can add your browser unique id to it's key and using normal android localstorage

Google has this to say on transferring data between accounts.

http://support.google.com/accounts/bin/answer.py?hl=en&answer=63304

It lists certain types of data that CAN be transferred and certain types of data that CAN NOT be transferred. Unfortunately Google Play Apps falls into the NOT category.

It's conveniently titled: "Moving Product Data"

http://support.google.com/accounts/bin/answer.py?hl=en&answer=58582

It's used for iterator-generators. Basically, it allows you to make a (potentially infinite) sequence using procedural code. See Mozilla's documentation.

In case someone having a problem like i had. I was using the parenthesis with the return statement on the same line at which i had written the rest of the code. Also, i used map function and props so i got so many brackets. In this case, if you're new to React you can avoid the brackets around the props, because now everyone prefers to use the arrow functions. And in the map function you can also avoid the brackets around your function callback.

props.sample.map(function callback => (
   ));

like so. In above code sample you can see there is only opening parenthesis at the left of the function callback.

if you can load jQuery from your own server, then you can append this to your jQuery file:

jQuery(document).trigger('jquery.loaded');

then you can bind to that triggered event.

xmllint support formatting in-place:

for f in *.xml; do xmllint -o $f --format $f; done

As Daniel Veillard has written:

I think xmllint -o tst.xml --format tst.xml should be safe as the parser will fully load the input into a tree before opening the output to serialize it.

Indent level is controlled by XMLLINT_INDENT environment variable which is by default 2 spaces. Example how to change indent to 4 spaces:

XMLLINT_INDENT='    '  xmllint -o out.xml --format in.xml

You may have lack with --recover option when you XML documents are broken. Or try weak HTML parser with strict XML output:

xmllint --html --xmlout <in.xml >out.xml

--nsclean, --nonet, --nocdata, --noblanks etc may be useful. Read man page.

apt-get install libxml2-utils
apt-cyg install libxml2
brew install libxml2

download the cert file, and update the keystore with the certificate file as in the below command.

sudo keytool -importcert -alias “aws2” -file ~/Desktop/*aws.crt -keystore /Library/java/JavaVirtualMachines/jdk1.8.0_131.jdk/Contents/Home/jre/lib/security/cacerts

You can do it like this:

#Just an example how the dictionary may look like
myDict = {'age': ['12'], 'address': ['34 Main Street, 212 First Avenue'],
      'firstName': ['Alan', 'Mary-Ann'], 'lastName': ['Stone', 'Lee']}

def search(values, searchFor):
    for k in values:
        for v in values[k]:
            if searchFor in v:
                return k
    return None

#Checking if string 'Mary' exists in dictionary value
print search(myDict, 'Mary') #prints firstName

I found the answers above didn't give me the guidance I needed (I too expected to be in the code for the .java file, and right-click on the tab and see a Refactor option). Here's what I did:

1. Go to the top of the .java module (ctrl+Home)
2. Double-click on the class name that is the same name as the .java module and the class name should now be highlight
3. Right-click the highlighted class name | Open Type Hierarchy. The Type Hierarchy should open showing the class name
4. Right-click the class name in the Type Hierarchy | Refactor | Rename | type the new name in the popup window Rename Type

On MAC you can do sout + return or ?+j (cmd+j) opens live template suggestions, enter sout to choose System.out.println();

The calculation occurs immediately since the calculation call is bound in the template, which displays its result when quantity changes.

Instead you could try the following approach. Change your markup to the following:

<div ng-controller="myAppController" style="text-align:center">
  <p style="font-size:28px;">Enter Quantity:
      <input type="text" ng-model="quantity"/>
  </p>
  <button ng-click="calculateQuantity()">Calculate</button>
  <h2>Total Cost: Rs.{{quantityResult}}</h2>
</div>

Next, update your controller:

myAppModule.controller('myAppController', function($scope,calculateService) {
  $scope.quantity=1;
  $scope.quantityResult = 0;

  $scope.calculateQuantity = function() {
    $scope.quantityResult = calculateService.calculate($scope.quantity, 10);
  };
});

Here's a JSBin example that demonstrates the above approach.

The problem with this approach is the calculated result remains visible with the old value till the button is clicked. To address this, you could hide the result whenever the quantity changes.

This would involve updating the template to add an ng-change on the input, and an ng-if on the result:

<input type="text" ng-change="hideQuantityResult()" ng-model="quantity"/>

and

<h2 ng-if="showQuantityResult">Total Cost: Rs.{{quantityResult}}</h2>

In the controller add:

$scope.showQuantityResult = false;

$scope.calculateQuantity = function() {
  $scope.quantityResult = calculateService.calculate($scope.quantity, 10);
  $scope.showQuantityResult = true;
};

$scope.hideQuantityResult = function() {
  $scope.showQuantityResult = false;
}; 

These updates can be seen in this JSBin demo.

install below libraries

var express = require(‘express’);
var fs = require(‘fs’);
var mongoose = require(‘mongoose’);
var Schema = mongoose.Schema;
var multer = require('multer');

connect ur mongo db :

mongoose.connect(‘url_here’);

Define database Schema

var Item = new ItemSchema({ 
    img: { 
       data: Buffer, 
       contentType: String 
    }
 }
);
var Item = mongoose.model('Clothes',ItemSchema);

using the middleware Multer to upload the photo on the server side.

app.use(multer({ dest: ‘./uploads/’,
  rename: function (fieldname, filename) {
    return filename;
  },
}));

post req to our db

app.post(‘/api/photo’,function(req,res){
  var newItem = new Item();
  newItem.img.data = fs.readFileSync(req.files.userPhoto.path)
  newItem.img.contentType = ‘image/png’;
  newItem.save();
});

That's because your first code snippet is not performing initialization, but assignment:

char myarray[4] = "abc";  // Initialization.

myarray = "abc";          // Assignment.

And arrays are not directly assignable in C.

The name myarray actually resolves to the address of its first element (&myarray[0]), which is not an lvalue, and as such cannot be the target of an assignment.

TextView tt;
int color = Integer.parseInt("bdbdbd", 16)+0xFF000000;
tt.setTextColor(color);

also

tt.setBackgroundColor(Integer.parseInt("d4d446", 16)+0xFF000000);

also

tt.setBackgroundColor(Color.parseColor("#d4d446"));

see:

Java/Android String to Color conversion

CASE might help you out:

SELECT t.first_name,
       t.last_name,
       t.employid,
       t.status
  FROM employeetable t
 WHERE t.status = (CASE WHEN status_flag = STATUS_ACTIVE THEN 'A'
                        WHEN status_flag = STATUS_INACTIVE THEN 'T'
                        ELSE null END)
   AND t.business_unit = (CASE WHEN source_flag = SOURCE_FUNCTION THEN 'production'
                               WHEN source_flag = SOURCE_USER THEN 'users'
                               ELSE null END)
   AND t.first_name LIKE firstname
   AND t.last_name LIKE lastname
   AND t.employid LIKE employeeid;

The CASE statement evaluates multiple conditions to produce a single value. So, in the first usage, I check the value of status_flag, returning 'A', 'T' or null depending on what it's value is, and compare that to t.status. I do the same for the business_unit column with a second CASE statement.

I do realize that this is a very old post, but I thought that I should offer perhaps a simpler solution to update it using only jQuery.

function getTextCursorPosition(ele) {   
    return ele.prop("selectionStart");
}

function setTextCursorPosition(ele,pos) {
    ele.prop("selectionStart", pos + 1);
    ele.prop("selectionEnd", pos + 1);
}

function insertNewLine(text,cursorPos) {
    var firstSlice = text.slice(0,cursorPos);
    var secondSlice = text.slice(cursorPos);

    var new_text = [firstSlice,"\n",secondSlice].join('');

    return new_text;
}

Usage for using ctrl-enter to add a new line (like in Facebook):

$('textarea').on('keypress',function(e){
    if (e.keyCode == 13 && !e.ctrlKey) {
        e.preventDefault();
        //do something special here with just pressing Enter
    }else if (e.ctrlKey){
        //If the ctrl key was pressed with the Enter key,
        //then enter a new line break into the text
        var cursorPos = getTextCursorPosition($(this));                

        $(this).val(insertNewLine($(this).val(), cursorPos));
        setTextCursorPosition($(this), cursorPos);
    }
});

I am open to critique. Thank you.

UPDATE: This solution does not allow normal copy and paste functionality to work (i.e. ctrl-c, ctrl-v), so I will have to edit this in the future to make sure that part works again. If you have an idea how to do that, please comment here, and I will be happy to test it out. Thanks.

See excerpt from official documentation for containment option:

containment

Default: false

Constrains dragging to within the bounds of the specified element or region.
Multiple types supported:

• Selector: The draggable element will be contained to the bounding box of the first element found by the selector. If no element is found, no containment will be set.
• Element: The draggable element will be contained to the bounding box of this element.
• String: Possible values: "parent", "document", "window".
• Array: An array defining a bounding box in the form [ x1, y1, x2, y2 ].

Code examples:
Initialize the draggable with the containment option specified:

$( ".selector" ).draggable({
    containment: "parent" 
}); 

Get or set the containment option, after initialization:

// Getter
var containment = $( ".selector" ).draggable( "option", "containment" );
// Setter
$( ".selector" ).draggable( "option", "containment", "parent" );

This seems quite strange and annoying that no "one" solution is there. for me http://localhost:8000 did not worked out but http://localhost:8000/ worked out.

Implement custom adapter for your class:

public class MyClassAdapter extends ArrayAdapter<MyClass> {

    private static class ViewHolder {
        private TextView itemView;
    }

    public MyClassAdapter(Context context, int textViewResourceId, ArrayList<MyClass> items) {
        super(context, textViewResourceId, items);
    }

    public View getView(int position, View convertView, ViewGroup parent) {

        if (convertView == null) {
            convertView = LayoutInflater.from(this.getContext())
            .inflate(R.layout.listview_association, parent, false);

            viewHolder = new ViewHolder();
            viewHolder.itemView = (TextView) convertView.findViewById(R.id.ItemView);

            convertView.setTag(viewHolder);
        } else {
            viewHolder = (ViewHolder) convertView.getTag();
        }

        MyClass item = getItem(position);
        if (item!= null) {
            // My layout has only one TextView
                // do whatever you want with your string and long
            viewHolder.itemView.setText(String.format("%s %d", item.reason, item.long_val));
        }

        return convertView;
    }
}

For those not very familiar with the Android framework, this is explained in better detail here: https://github.com/codepath/android_guides/wiki/Using-an-ArrayAdapter-with-ListView.

In newer version of git (2.23+) you can use:

git switch -C master origin/master

-C is same as --force-create. Related Reference Docs

Ok, I tried something like this:

body (normal)

#MainDiv { 
  /* where all the content goes */
  display: table;
  overflow-y: auto;
}

It's not the exact way to write it, but if you make the main div display as a table, it expands and then I implemented scroll bars.

var values = {};
$('td input').each(function(){
  values[$(this).attr('name')] = $(this).val();
}

Haven't tested, but that should do it...

The best way to go about it would be to get a SynchronizationContext from the UI thread and use it. This class abstracts marshalling calls to other threads, and makes testing easier (in contrast to using WPF's Dispatcher directly). For example:

class MyViewModel
{
    private readonly SynchronizationContext _syncContext;

    public MyViewModel()
    {
        // we assume this ctor is called from the UI thread!
        _syncContext = SynchronizationContext.Current;
    }

    // ...

    private void watcher_Changed(object sender, FileSystemEventArgs e)
    {
         _syncContext.Post(o => DGAddRow(crp.Protocol, ft), null);
    }
}

Here is the code and demo for Adding the marker, deleting any of the marker and also getting all the present/added markers :

Here is the entire JSFiddle code . Also here is the full page demo.

Adding the marker :

// Script for adding marker on map click
map.on('click', onMapClick);

function onMapClick(e) {

    var geojsonFeature = {

        "type": "Feature",
        "properties": {},
        "geometry": {
                "type": "Point",
                "coordinates": [e.latlng.lat, e.latlng.lng]
        }
    }

    var marker;

    L.geoJson(geojsonFeature, {

        pointToLayer: function(feature, latlng){

            marker = L.marker(e.latlng, {

                title: "Resource Location",
                alt: "Resource Location",
                riseOnHover: true,
                draggable: true,

            }).bindPopup("<input type='button' value='Delete this marker' class='marker-delete-button'/>");

            marker.on("popupopen", onPopupOpen);

            return marker;
        }
    }).addTo(map);
}

Deleting the Marker :

// Function to handle delete as well as other events on marker popup open

function onPopupOpen() {

    var tempMarker = this;

    // To remove marker on click of delete button in the popup of marker
    $(".marker-delete-button:visible").click(function () {
        map.removeLayer(tempMarker);
    });
}

Getting all the markers in the map :

// getting all the markers at once
function getAllMarkers() {

    var allMarkersObjArray = []; // for marker objects
    var allMarkersGeoJsonArray = []; // for readable geoJson markers

    $.each(map._layers, function (ml) {

        if (map._layers[ml].feature) {

            allMarkersObjArray.push(this)
            allMarkersGeoJsonArray.push(JSON.stringify(this.toGeoJSON()))
        }
    })

    console.log(allMarkersObjArray);
}

// any html element such as button, div to call the function()
$(".get-markers").on("click", getAllMarkers);

Like this:

var myString = "19 51 2.108997";
var stringParts = myString.split(" ");
var html = "<span>" + stringParts[0] + " " + stringParts[1] + "</span> <span>" + stringParts[2] + "</span";

Have a look at the following

@using (Html.BeginForm("FileUpload", "Home", FormMethod.Post, 
                            new { enctype = "multipart/form-data" }))
{  
    <label for="file">Upload Image:</label> 
    <input type="file" name="file" id="file" style="width: 100%;" /> 
    <input type="submit" value="Upload" class="submit" /> 
}

your controller should have action method which would accept HttpPostedFileBase;

 public ActionResult FileUpload(HttpPostedFileBase file)
    {
        if (file != null)
        {
            string pic = System.IO.Path.GetFileName(file.FileName);
            string path = System.IO.Path.Combine(
                                   Server.MapPath("~/images/profile"), pic); 
            // file is uploaded
            file.SaveAs(path);

            // save the image path path to the database or you can send image 
            // directly to database
            // in-case if you want to store byte[] ie. for DB
            using (MemoryStream ms = new MemoryStream()) 
            {
                 file.InputStream.CopyTo(ms);
                 byte[] array = ms.GetBuffer();
            }

        }
        // after successfully uploading redirect the user
        return RedirectToAction("actionname", "controller name");
    }

Update 1

In case you want to upload files using jQuery with asynchornously, then try this article.

the code to handle the server side (for multiple upload) is;

 try
    {
        HttpFileCollection hfc = HttpContext.Current.Request.Files;
        string path = "/content/files/contact/";

        for (int i = 0; i < hfc.Count; i++)
        {
            HttpPostedFile hpf = hfc[i];
            if (hpf.ContentLength > 0)
            {
                string fileName = "";
                if (Request.Browser.Browser == "IE")
                {
                    fileName = Path.GetFileName(hpf.FileName);
                }
                else
                {
                    fileName = hpf.FileName;
                }
                string fullPathWithFileName = path + fileName;
                hpf.SaveAs(Server.MapPath(fullPathWithFileName));
            }
        }

    }
    catch (Exception ex)
    {
        throw ex;
    }

this control also return image name (in a javascript call back) which then you can use it to display image in the DOM.

UPDATE 2

Alternatively, you can try Async File Uploads in MVC 4.

df = pd.DataFrame({'countries':['US','UK','Germany','China']})
countries = ['UK','China']

implement in:

df[df.countries.isin(countries)]

implement not in as in of rest countries:

df[df.countries.isin([x for x in np.unique(df.countries) if x not in countries])]

Here's one more approach by using SET and FOR /F

@echo off

set "var=<?xml version="1.0" encoding="utf-8" ?>"

for /f "tokens=1* delims==" %%a in ('set var') do echo %%b

and you can beautify it like:

@echo off
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
set "print{[=for /f "tokens=1* delims==" %%a in ('set " & set "]}=') do echo %%b"
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::


set "xml_line.1=<?xml version="1.0" encoding="utf-8" ?>"
set "xml_line.2=<root>"
set "xml_line.3=</root>"

%print{[% xml_line %]}%

Put breakpoints - double click on the margin. Run > Debug > Yes (if dialog appears), then use commands from Run menu or shortcuts - F5, F6, F7, F8.

If you are learning it's helpful to use a GUI like SQLyog, make the changes using the program and then see the History tab for the DDL statements that made those changes.

Assuming you want them next to each other:

<form action="" class="form-inline">
    <div class="form-group">
        <input type="text" class="form-control" placeholder="MinVal">
    </div>
    <div class="form-group">    
         <input type="text" class="form-control" placeholder="MaxVal">   
    </div>
</form>

JSFiddle

Update Nr.1: Should you want to use .input-group with this example:

<form action="" class="form-inline">
    <div class="form-group">
        <div class="input-group">
          <span class="input-group-addon">@</span>
          <input type="text" class="form-control" placeholder="Username">
        </div>
    </div>
    <div class="form-group">    
        <div class="input-group">
          <input type="text" class="form-control">
          <span class="input-group-addon">.00</span>
        </div>
    </div>
</form>

JSFiddle

The class .input-group is there to extend inputs with buttons and such (directly attached). Checkboxes or radio buttons are possible as well. I don't think it works with two input fields though.

Update Nr. 2: With .form-horizontal the .form-group tag basically becomes a .row tag so you can use the column classes such as .col-sm-8:

<form action="" class="form-horizontal">
    <div class="form-group">
        <div class="col-sm-8">
            <input type="text" class="form-control" placeholder="MinVal">
        </div>
        <div class="col-sm-4">
            <input type="text" class="form-control" placeholder="MaxVal">
        </div>
    </div>
</form>

Updated JSFiddle with all three examples

Swift 3 & 4

Swift 3, and now Swift 4, have replaced many "stringly-typed" APIs with struct "wrapper types", as is the case with NotificationCenter. Notifications are now identified by a struct Notfication.Name rather than by String. For more details see the now legacy Migrating to Swift 3 guide

Swift 2.2 usage:

// Define identifier
let notificationIdentifier: String = "NotificationIdentifier"

// Register to receive notification
NSNotificationCenter.defaultCenter().addObserver(self, selector: #selector(YourClassName.methodOfReceivedNotification(_:)), name: notificationIdentifier, object: nil)

// Post a notification
NSNotificationCenter.defaultCenter().postNotificationName(notificationIdentifier, object: nil)

Swift 3 & 4 usage:

// Define identifier
let notificationName = Notification.Name("NotificationIdentifier")

// Register to receive notification
NotificationCenter.default.addObserver(self, selector: #selector(YourClassName.methodOfReceivedNotification), name: notificationName, object: nil)

// Post notification
NotificationCenter.default.post(name: notificationName, object: nil)

// Stop listening notification
NotificationCenter.default.removeObserver(self, name: notificationName, object: nil)

All of the system notification types are now defined as static constants on Notification.Name; i.e. .UIApplicationDidFinishLaunching, .UITextFieldTextDidChange, etc.

You can extend Notification.Name with your own custom notifications in order to stay consistent with the system notifications:

// Definition:
extension Notification.Name {
    static let yourCustomNotificationName = Notification.Name("yourCustomNotificationName")
}

// Usage:
NotificationCenter.default.post(name: .yourCustomNotificationName, object: nil)

Swift 4.2 usage:

Same as Swift 4, except now system notifications names are part of UIApplication. So in order to stay consistent with the system notifications you can extend UIApplication with your own custom notifications instead of Notification.Name :

// Definition:
UIApplication {
    public static let yourCustomNotificationName = Notification.Name("yourCustomNotificationName")
}

// Usage:
NotificationCenter.default.post(name: UIApplication.yourCustomNotificationName, object: nil)

Yes there is retainAll check out this

Set<Type> intersection = new HashSet<Type>(s1);
intersection.retainAll(s2);

Felt the need to add this better answer, as nothing except BackgroundWorker seemed to help me, and the answer dealing with that thus far was woefully incomplete. This is how you would update a XAML page called MainWindow that has an Image tag like this:

<Image Name="imgNtwkInd" Source="Images/network_on.jpg" Width="50" />

with a BackgroundWorker process to show if you are connected to the network or not:

using System.ComponentModel;
using System.Windows;
using System.Windows.Controls;

public partial class MainWindow : Window
{
    private BackgroundWorker bw = new BackgroundWorker();

    public MainWindow()
    {
        InitializeComponent();

        // Set up background worker to allow progress reporting and cancellation
        bw.WorkerReportsProgress = true;
        bw.WorkerSupportsCancellation = true;

        // This is your main work process that records progress
        bw.DoWork += new DoWorkEventHandler(SomeClass.DoWork);

        // This will update your page based on that progress
        bw.ProgressChanged += new ProgressChangedEventHandler(bw_ProgressChanged);

        // This starts your background worker and "DoWork()"
        bw.RunWorkerAsync();

        // When this page closes, this will run and cancel your background worker
        this.Closing += new CancelEventHandler(Page_Unload);
    }

    private void bw_ProgressChanged(object sender, ProgressChangedEventArgs e)
    {
        BitmapImage bImg = new BitmapImage();
        bool connected = false;
        string response = e.ProgressPercentage.ToString(); // will either be 1 or 0 for true/false -- this is the result recorded in DoWork()

        if (response == "1")
            connected = true;

        // Do something with the result we got
        if (!connected)
        {
            bImg.BeginInit();
            bImg.UriSource = new Uri("Images/network_off.jpg", UriKind.Relative);
            bImg.EndInit();
            imgNtwkInd.Source = bImg;
        }
        else
        {
            bImg.BeginInit();
            bImg.UriSource = new Uri("Images/network_on.jpg", UriKind.Relative);
            bImg.EndInit();
            imgNtwkInd.Source = bImg;
        }
    }

    private void Page_Unload(object sender, CancelEventArgs e)
    {
        bw.CancelAsync();  // stops the background worker when unloading the page
    }
}


public class SomeClass
{
    public static bool connected = false;

    public void DoWork(object sender, DoWorkEventArgs e)
    {
        BackgroundWorker bw = sender as BackgroundWorker;

        int i = 0;
        do 
        {
            connected = CheckConn();  // do some task and get the result

            if (bw.CancellationPending == true)
            {
                e.Cancel = true;
                break;
            }
            else
            {
                Thread.Sleep(1000);
                // Record your result here
                if (connected)
                    bw.ReportProgress(1);
                else
                    bw.ReportProgress(0);
            }
        }
        while (i == 0);
    }

    private static bool CheckConn()
    {
        bool conn = false;
        Ping png = new Ping();
        string host = "SomeComputerNameHere";

        try
        {
            PingReply pngReply = png.Send(host);
            if (pngReply.Status == IPStatus.Success)
                conn = true;
        }
        catch (PingException ex)
        {
            // write exception to log
        }
        return conn;
    }
}

For more information: https://msdn.microsoft.com/en-us/library/cc221403(v=VS.95).aspx

The Visual Studio Build tools are a different download than the IDE. They appear to be a pretty small subset, and they're called Build Tools for Visual Studio 2019 (download).

You can use the GUI to do the installation, or you can script the installation of msbuild:

vs_buildtools.exe --add Microsoft.VisualStudio.Workload.MSBuildTools --quiet

Microsoft.VisualStudio.Workload.MSBuildTools is a "wrapper" ID for the three subcomponents you need:

• Microsoft.Component.MSBuild
• Microsoft.VisualStudio.Component.CoreBuildTools
• Microsoft.VisualStudio.Component.Roslyn.Compiler

You can find documentation about the other available CLI switches here.

The build tools installation is much quicker than the full IDE. In my test, it took 5-10 seconds. With --quiet there is no progress indicator other than a brief cursor change. If the installation was successful, you should be able to see the build tools in %programfiles(x86)%\Microsoft Visual Studio\2019\BuildTools\MSBuild\Current\Bin.

If you don't see them there, try running without --quiet to see any error messages that may occur during installation.

Well, it'd still be convenient (syntactically) if we could declare usual values inside the if's condition. So, here's a trick: you can make the compiler think there is an assignment of Optional.some(T) to a value like so:

    if let i = "abc".firstIndex(of: "a"),
        let i_int = .some(i.utf16Offset(in: "abc")),
        i_int < 1 {
        // Code
    }

.myDiv { height: 150px; width 150px; }

<div class="mainDiv">
   <div class="myDiv"></div>
   <div class="myDiv"></div>
   <div class="myDiv"></div>
</div>

EDIT: This answer is now outdated, see the updated version.

In my R package I have enhanced sample so that it now behaves as expected also for data frames:

library(devtools); install_github('kimisc', 'krlmlr')

library(kimisc)
example(sample.data.frame)

smpl..> set.seed(42)

smpl..> sample(data.frame(a=c(1,2,3), b=c(4,5,6),
                           row.names=c('a', 'b', 'c')), 10, replace=TRUE)
    a b
c   3 6
c.1 3 6
a   1 4
c.2 3 6
b   2 5
b.1 2 5
c.3 3 6
a.1 1 4
b.2 2 5
c.4 3 6

This is achieved by making sample an S3 generic method and providing the necessary (trivial) functionality in a function. A call to setMethod fixes everything. The original implementation still can be accessed through base::sample.

Yes you can resolve this issue by making the adapter constructor only one time, I am explaining the coding part here :

if (appointmentListAdapter == null) {
        appointmentListAdapter = new AppointmentListAdapter(AppointmentsActivity.this);
        appointmentListAdapter.addAppointmentListData(appointmentList);
        appointmentListAdapter.setOnStatusChangeListener(onStatusChangeListener);
        appointmentRecyclerView.setAdapter(appointmentListAdapter);

    } else {
        appointmentListAdapter.addAppointmentListData(appointmentList);
        appointmentListAdapter.notifyDataSetChanged();
    }

Now you can see I have checked the adapter is null or not and only initialize when it is null.

If adapter is not null then I am assured that I have initialized my adapter at least one time.

So I will just add list to adapter and call notifydatasetchanged.

RecyclerView always holds the last position scrolled, therefore you don't have to store last position, just call notifydatasetchanged, recycler view always refresh data without going to top.

Thanks Happy Coding

Look at the open function in Perl - especially the variants using a '|' (pipe) in the arguments. Done correctly, you'll get a file handle that you can use to read the output of the command. The back tick operators also do this.

You might also want to review whether Perl has access to the C functions that the command itself uses. For example, for ls -a, you could use the opendir function, and then read the file names with the readdir function, and finally close the directory with (surprise) the closedir function. This has a number of benefits - precision probably being more important than speed. Using these functions, you can get the correct data even if the file names contain odd characters like newline.

You might be interested by https://github.com/pandas-ml/pandas-ml/

which implements a Python Pandas implementation of Confusion Matrix.

Some features:

• plot confusion matrix
• plot normalized confusion matrix
• class statistics
• overall statistics

Here is an example:

In [1]: from pandas_ml import ConfusionMatrix
In [2]: import matplotlib.pyplot as plt

In [3]: y_test = ['business', 'business', 'business', 'business', 'business',
        'business', 'business', 'business', 'business', 'business',
        'business', 'business', 'business', 'business', 'business',
        'business', 'business', 'business', 'business', 'business']

In [4]: y_pred = ['health', 'business', 'business', 'business', 'business',
       'business', 'health', 'health', 'business', 'business', 'business',
       'business', 'business', 'business', 'business', 'business',
       'health', 'health', 'business', 'health']

In [5]: cm = ConfusionMatrix(y_test, y_pred)

In [6]: cm
Out[6]:
Predicted  business  health  __all__
Actual
business         14       6       20
health            0       0        0
__all__          14       6       20

In [7]: cm.plot()
Out[7]: <matplotlib.axes._subplots.AxesSubplot at 0x1093cf9b0>

In [8]: plt.show()

In [9]: cm.print_stats()
Confusion Matrix:

Predicted  business  health  __all__
Actual
business         14       6       20
health            0       0        0
__all__          14       6       20


Overall Statistics:

Accuracy: 0.7
95% CI: (0.45721081772371086, 0.88106840959427235)
No Information Rate: ToDo
P-Value [Acc > NIR]: 0.608009812201
Kappa: 0.0
Mcnemar's Test P-Value: ToDo


Class Statistics:

Classes                                 business health
Population                                    20     20
P: Condition positive                         20      0
N: Condition negative                          0     20
Test outcome positive                         14      6
Test outcome negative                          6     14
TP: True Positive                             14      0
TN: True Negative                              0     14
FP: False Positive                             0      6
FN: False Negative                             6      0
TPR: (Sensitivity, hit rate, recall)         0.7    NaN
TNR=SPC: (Specificity)                       NaN    0.7
PPV: Pos Pred Value (Precision)                1      0
NPV: Neg Pred Value                            0      1
FPR: False-out                               NaN    0.3
FDR: False Discovery Rate                      0      1
FNR: Miss Rate                               0.3    NaN
ACC: Accuracy                                0.7    0.7
F1 score                               0.8235294      0
MCC: Matthews correlation coefficient        NaN    NaN
Informedness                                 NaN    NaN
Markedness                                     0      0
Prevalence                                     1      0
LR+: Positive likelihood ratio               NaN    NaN
LR-: Negative likelihood ratio               NaN    NaN
DOR: Diagnostic odds ratio                   NaN    NaN
FOR: False omission rate                       1      0

Another drawback of const in C is that you can't use the value in initializing another const.

static int const NUMBER_OF_FINGERS_PER_HAND = 5;
static int const NUMBER_OF_HANDS = 2;

// initializer element is not constant, this does not work.
static int const NUMBER_OF_FINGERS = NUMBER_OF_FINGERS_PER_HAND 
                                     * NUMBER_OF_HANDS;

Even this does not work with a const since the compiler does not see it as a constant:

static uint8_t const ARRAY_SIZE = 16;
static int8_t const lookup_table[ARRAY_SIZE] = {
    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}; // ARRAY_SIZE not a constant!

I'd be happy to use typed const in these cases, otherwise...

The answers are partially correct. I also faced the same problem. Parsing the json and checking for exception seems the usual way but the solution fails for the input json something like

{"outputValueSchemaFormat": "","sortByIndexInRecord": 0,"sortOrder":847874874387209"descending"}kajhfsadkjh

As you can see the json is invalid as there are trailing garbage characters. But if you try to parse the above json using jackson or gson then you will get the parsed map of the valid json and garbage trailing characters are ignored. Which is not the required solution when you are using the parser for checking json validity.

For solution to this problem see here.

PS: This question was asked and answered by me.

When you have a conflict during rebase you have three options:

• You can run git rebase --abort to completely undo the rebase. Git will return you to your branch's state as it was before git rebase was called.

• You can run git rebase --skip to completely skip the commit. That means that none of the changes introduced by the problematic commit will be included. It is very rare that you would choose this option.

• You can fix the conflict as iltempo said. When you're finished, you'll need to call git rebase --continue. My mergetool is kdiff3 but there are many more which you can use to solve conflicts. You only need to set your merge tool in git's settings so it can be invoked when you call git mergetool https://git-scm.com/docs/git-mergetool

If none of the above works for you, then go for a walk and try again :)

Using the "Add Service Reference" tool in Visual Studio, you can insert the address as:

file:///path/to/wsdl/file.wsdl

And it will load properly.

If you have cells with something like ="" and don't want to count them, you have to subtract number of empty cells from total number of cell by formula like

=row(G101)-row(G4)+1-countblank(G4:G101)

In case of 2-dimensional array it would be

=(row(G101)-row(A4)+1)*(column(G101)-column(A4)+1)-countblank(A4:G101)

Tested at google docs.

I was trying to work with that solutions but it doesn't work. But later I was realize that the function it wasn't declared so I watch in to the dropzone.com page and take the example to call events. So finally work on my site. For those like me who don't understand JavaScript very well, I leave you the example.

<script type="text/javascript" src="/js/dropzone.js"></script>
<script type="text/javascript">
// This example uses jQuery so it creates the Dropzone, only when the DOM has
// loaded.

// Disabling autoDiscover, otherwise Dropzone will try to attach twice.
Dropzone.autoDiscover = false;
// or disable for specific dropzone:
// Dropzone.options.myDropzone = false;

$(function() {
  // Now that the DOM is fully loaded, create the dropzone, and setup the
  // event listeners
  var myDropzone = new Dropzone(".dropzone");

  myDropzone.on("queuecomplete", function(file, res) {
      if (myDropzone.files[0].status != Dropzone.SUCCESS ) {
          alert('yea baby');
      } else {
          alert('cry baby');

      }
  });
});
</script>

   `String s="as234dfd423";
for(int i=0;i<s.length();i++)
 {
    char c=s.charAt(i);``
    char d=s.charAt(i);
     if ('a' <= c && c <= 'z')
         System.out.println("String:-"+c);
     else  if ('0' <= d && d <= '9')
           System.out.println("number:-"+d);
    }

output:-

number:-4
number:-3
number:-4
String:-d
String:-f
String:-d
number:-2
number:-3

You may try to develop web apps for iPhone using HTML, JavaScript, CSS. Check the getting started info at Apple's site.

I wanted to add my experience on that. Indeed EF, when you add an object to the context, it changes the state of all the children and related entities to Added. Although there is a small exception in the rule here: if the children/related entities are being tracked by the same context, EF does understand that these entities exist and doesn't add them. The problem happens when for example, you load the children/related entities from some other context or a web ui etc and then yes, EF doesn't know anything about these entities and goes and adds all of them. To avoid that, just get the keys of the entities and find them (e.g. context.Students.FirstOrDefault(s => s.Name == "Alice")) in the same context in which you want to do the addition.

I finally find answers to my question based on all of your comments. Thanks, I tried this :

public Integer calculateHash(String uuid) {

    try {
        //....
        String hex = hexToString(output);
        //Integer i = Integer.valueOf(hex, 16).intValue();
        //Instead of using Integer, I used BigInteger and I returned the int value.
        BigInteger bi = new BigInteger(hex, 16);
        return bi.intValue();`
    } catch (NoSuchAlgorithmException e) {
        System.out.println("SHA1 not implemented in this system");
    }
    //....
}

This solution is not optimal but I can continue with my project. Thanks again for your help

One way to keep it simple and avoid messing with the arrows and other such features is just to house it in a div with the same background color as the select tag.

we can convert byte[] array into input stream by using ByteArrayInputStream

String str = "Welcome to awesome Java World";
    byte[] content = str.getBytes();
    int size = content.length;
    InputStream is = null;
    byte[] b = new byte[size];
    is = new ByteArrayInputStream(content);

For full example please check here http://www.onlinecodegeek.com/2015/09/how-to-convert-byte-into-inputstream.html

In base R, we can select the columns which we want to test using grep, compare the data with 0, use rowSums to select rows which has all non-zero values.

cols <- grep("^Mac", names(df))
df[rowSums(df[cols] != 0) == length(cols), ]

#          DateTime Mac1 Mac2 Mac3 Mac4
#1 2011-04-02 06:05   21   21   21   21
#2 2011-04-02 06:10   22   22   22   22
#3 2011-04-02 06:20   24   24   24   24

Doing this with inverted logic but giving the same output

df[rowSums(df[cols] == 0) == 0, ]

In dplyr, we can use filter_at to test for specific columns and use all_vars to select rows where all the values are not equal to 0.

library(dplyr)
df %>%  filter_at(vars(starts_with("Mac")), all_vars(. != 0))

data

df <- structure(list(DateTime = structure(1:6, .Label = c("2011-04-02 06:00", 
"2011-04-02 06:05", "2011-04-02 06:10", "2011-04-02 06:15", "2011-04-02 06:20", 
"2011-04-02 06:25"), class = "factor"), Mac1 = c(20L, 21L, 22L, 
23L, 24L, 0L), Mac2 = c(0L, 21L, 22L, 23L, 24L, 25L), Mac3 = c(20L, 
21L, 22L, 0L, 24L, 25L), Mac4 = c(20L, 21L, 22L, 23L, 24L, 0L
)), class = "data.frame", row.names = c(NA, -6L))

Going with what you've started:

row = [[]] 
crimefile = open(fileName, 'r') 
for line in crimefile.readlines(): 
    tmp = []
    for element in line[0:-1].split(','):
        tmp.append(element)
row.append(tmp)

To select the database query below :

use DatabaseName

Now

SELECT * FROM INFORMATION_SCHEMA.TABLES

Now you can see the created tables below in console .

PFA.

Try This

SELECT Title  from #Movies
    SELECT CASE WHEN Title = '' THEN 'No Title' ELSE Title END AS Titile from #Movies

OR

SELECT [Id], [CategoryId], ISNULL(nullif(Title,''),'No data') as Title, [Director], [DateReleased] FROM #Movies

Considering the typical top-level class. Only public and no modifier access modifiers may be used at the top level so you'll either see public or you won't see any access modifier at all.

`static`` is used because you may not have a need to create an actual object at the top level (but sometimes you will want to so you may not always see/use static. There are other reasons why you wouldn't include static too but this is the typical one at the top level.)

void is used because usually you're not going to be returning a value from the top level (class). (sometimes you'll want to return a value other than NULL so void may not always be used either especially in the case when you have declared, initialized an object at the top level that you are assigning some value to).

Disclaimer: I'm a newbie myself so if this answer is wrong in any way please don't hang me. By day I'm a tech recruiter not a developer; coding is my hobby. Also, I'm always open to constructive criticism and love to learn so please feel free to point out any errors.

An alternative to the answer of asselin for use with ES2015 classes

class InvalidArgumentException extends Error {
    constructor(message) {
        super();
        Error.captureStackTrace(this, this.constructor);
        this.name = "InvalidArgumentException";
        this.message = message;
    }
}

I have created a working CodePen example to demonstrate how you might accomplish your goals.

I added ng-click to the <form> and removed the logic from your button:

<form name="addRelation" data-ng-click="save(model)">
...
<input class="btn" type="submit" value="SAVE" />

Here's the updated template:

<section ng-app="app" ng-controller="MainCtrl">
  <form class="well" name="addRelation" data-ng-click="save(model)">
    <label>First Name</label>
    <input type="text" placeholder="First Name" data-ng-model="model.firstName" id="FirstName" name="FirstName" required/><br/>
    <span class="text-error" data-ng-show="addRelation.submitted && addRelation.FirstName.$invalid">First Name is required</span><br/>
    <label>Last Name</label>
    <input type="text" placeholder="Last Name" data-ng-model="model.lastName" id="LastName" name="LastName" required/><br/>
    <span class="text-error" data-ng-show="addRelation.submitted && addRelation.LastName.$invalid">Last Name is required</span><br/>
    <label>Email</label>
    <input type="email" placeholder="Email" data-ng-model="model.email" id="Email" name="Email" required/><br/>
    <span class="text-error" data-ng-show="addRelation.submitted && addRelation.Email.$error.required">Email address is required</span>
    <span class="text-error" data-ng-show="addRelation.submitted && addRelation.Email.$error.email">Email address is not valid</span><br/>
    <input class="btn" type="submit" value="SAVE" />  
  </form>
</section>

and controller code:

app.controller('MainCtrl', function($scope) {  
  $scope.save = function(model) {
    $scope.addRelation.submitted = true;

    if($scope.addRelation.$valid) {
      // submit to db
      console.log(model); 
    } else {
      console.log('Errors in form data');
    }
  };
});

I hope this helps.

There are possible solutions here: http://forums.mysql.com/read.php?35,64808,254785#msg-254785 and here: http://forums.mysql.com/read.php?35,23138,254786#msg-254786

All of these are config settings. In my case I have two computers with everything in XAMPP synced. On the other computer phpMyAdmin did start normally. So the problem in my case seemed to be with the specific computer, not the config files. Stopping firewall didn't help.

Finally, more or less by accident, I bumped into the file:

...path_to_XAMPP\XAMPP...\mysql\bin\mysqld-debug.exe

Doubleclicking that file miraculously gave me back PhpMyAdmin. Posted here in case anyone might be helped by this too.

I know this question is old, but in the last days I had searched whole web to solution this same question. I have grails REST webservices and iPhone Client that send pictures, title and description.

I don't know if my approach is the best, but is so easy and simple.

I take a picture using the UIImagePickerController and send to server the NSData using the header tags of request to send the picture's data.

NSMutableURLRequest *request = [[NSMutableURLRequest alloc] initWithURL:[NSURL URLWithString:@"myServerAddress"]];
[request setHTTPMethod:@"POST"];
[request setHTTPBody:UIImageJPEGRepresentation(picture, 0.5)];
[request setValue:@"image/jpeg" forHTTPHeaderField:@"Content-Type"];
[request setValue:@"myPhotoTitle" forHTTPHeaderField:@"Photo-Title"];
[request setValue:@"myPhotoDescription" forHTTPHeaderField:@"Photo-Description"];

NSURLResponse *response;

NSError *error;

[NSURLConnection sendSynchronousRequest:request returningResponse:&response error:&error];

At the server side, I receive the photo using the code:

InputStream is = request.inputStream

def receivedPhotoFile = (IOUtils.toByteArray(is))

def photo = new Photo()
photo.photoFile = receivedPhotoFile //photoFile is a transient attribute
photo.title = request.getHeader("Photo-Title")
photo.description = request.getHeader("Photo-Description")
photo.imageURL = "temp"    

if (photo.save()) {    

    File saveLocation = grailsAttributes.getApplicationContext().getResource(File.separator + "images").getFile()
    saveLocation.mkdirs()

    File tempFile = File.createTempFile("photo", ".jpg", saveLocation)

    photo.imageURL = saveLocation.getName() + "/" + tempFile.getName()

    tempFile.append(photo.photoFile);

} else {

    println("Error")

}

I don't know if I have problems in future, but now is working fine in production environment.

Unfortunately the only reliable way i have found to check this cross browser is to poll the input. To make it responsive also listen to events. Chrome has started hiding auto fill values from javascript which needs a hack.

• Poll every half to third of a second ( Does not need to be instant in most cases )
• Trigger the change event using JQuery then do your logic in a function listening to the change event.

• Add a fix for Chrome hidden autofill password values.

  $(document).ready(function () {
      $('#inputID').change(YOURFUNCTIONNAME);
      $('#inputID').keypress(YOURFUNCTIONNAME);
      $('#inputID').keyup(YOURFUNCTIONNAME);
      $('#inputID').blur(YOURFUNCTIONNAME);
      $('#inputID').focusin(YOURFUNCTIONNAME);
      $('#inputID').focusout(YOURFUNCTIONNAME);
      $('#inputID').on('input', YOURFUNCTIONNAME);
      $('#inputID').on('textInput', YOURFUNCTIONNAME);
      $('#inputID').on('reset', YOURFUNCTIONNAME);
  
      window.setInterval(function() {
          var hasValue = $("#inputID").val().length > 0;//Normal
          if(!hasValue){
              hasValue = $("#inputID:-webkit-autofill").length > 0;//Chrome
          }
  
          if (hasValue) {
              $('#inputID').trigger('change');
          }
      }, 333);
  });
  

The command you want is 'du -sk' du = "disk usage"

The -k flag gives you output in kilobytes, rather than the du default of disk sectors (512-byte blocks).

The -s flag will only list things in the top level directory (i.e., the current directory, by default, or the directory specified on the command line). It's odd that du has the opposite behavior of ls in this regard. By default du will recursively give you the disk usage of each sub-directory. In contrast, ls will only give list files in the specified directory. (ls -R gives you recursive behavior.)

Had the same problem, regenerating application key helped - php artisan key:generate

file version < 5 : file -i -b /path/to/file
file version >=5 : file --mime-type -b /path/to/file

Expanding on scrappedocola/renergy's idea, you can turn the JavaScript into a bookmarklet that executes against the javascript: uri so the code can be re-used easily across multiple pages without having to open up the dev tools or keep anything on your clipboard.

Just run the following snippet and drag the link to your bookmarks/favorites bar:

<a href="javascript: var el = document.querySelectorAll('style,link');_x000D_
         for (var i=0; i<el.length; i++) {_x000D_
           el[i].parentNode.removeChild(el[i]); _x000D_
         };">_x000D_
  Remove Styles _x000D_
</a>

• I would avoid looping through the thousands of elements on a page with getElementsByTagName('*') and have to check and act on each individually.
• I would avoid relying on jQuery existing on the page with $('style,link[rel="stylesheet"]').remove() when the extra javascript is not overwhelmingly cumbersome.

If you're a Cygwin user, you can append the following to your ~/.bashrc file:

stty lnext ^q stop undef start undef

And the following to your ~/.inputrc file:

"\C-v": paste-from-clipboard
"\C-C": copy-to-clipboard

Restart your Cygwin terminal.

(Note, I've used an uppercase C for copy, since CTRL+c is assigned to the break function on most consoles. Season to taste.)

Source

sudo npm install -g yarnpkg
npm WARN deprecated [email protected]: Please use the `yarn` package instead of `yarnpkg`

so this works for me

sudo npm install -g yarn

If you want to avoid fencepost errors and avoid moving and deleting items in an array, here is a somewhat verbose solution that uses List:

import java.util.ArrayList;
import java.util.List;

public class RemoveNullValue {
  public static void main( String args[] ) {
    String[] firstArray = {"test1", "", "test2", "test4", "", null};

    List<String> list = new ArrayList<String>();

    for(String s : firstArray) {
       if(s != null && s.length() > 0) {
          list.add(s);
       }
    }

    firstArray = list.toArray(new String[list.size()]);
  }
}

Added null to show the difference between an empty String instance ("") and null.

Since this answer is around 4.5 years old, I'm adding a Java 8 example:

import java.util.Arrays;
import java.util.stream.Collectors;

public class RemoveNullValue {
    public static void main( String args[] ) {
        String[] firstArray = {"test1", "", "test2", "test4", "", null};

        firstArray = Arrays.stream(firstArray)
                     .filter(s -> (s != null && s.length() > 0))
                     .toArray(String[]::new);    

    }
}

Bind-address XXX.XX.XX.XXX in /etc/my.cnf

comment line:

skip-networking

or

skip-external-locking

after edit hit service mysqld restart

login into mysql and hit this query:

GRANT ALL PRIVILEGES ON dbname.* TO 'username'@'%' IDENTIFIED BY 'password';

FLUSH PRIVILEGES;
quit;

add firewall rule:

iptables -I INPUT -i eth0 -p tcp --destination-port 3306 -j ACCEPT

Hard to find a clear answer from the Oracle site. The following is from javax.ws.rs.core.HttpHeaders.java:

/**
 * See {@link <a href="http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.1">HTTP/1.1 documentation</a>}.
 */
public static final String ACCEPT = "Accept";

/**
 * See {@link <a href="http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.2">HTTP/1.1 documentation</a>}.
 */
public static final String ACCEPT_CHARSET = "Accept-Charset";

timsort

Timsort is "an adaptive, stable, natural mergesort" with "supernatural performance on many kinds of partially ordered arrays (less than lg(N!) comparisons needed, and as few as N-1)". Python's built-in sort() has used this algorithm for some time, apparently with good results. It's specifically designed to detect and take advantage of partially sorted subsequences in the input, which often occur in real datasets. It is often the case in the real world that comparisons are much more expensive than swapping items in a list, since one typically just swaps pointers, which very often makes timsort an excellent choice. However, if you know that your comparisons are always very cheap (writing a toy program to sort 32-bit integers, for instance), other algorithms exist that are likely to perform better. The easiest way to take advantage of timsort is of course to use Python, but since Python is open source you might also be able to borrow the code. Alternately, the description above contains more than enough detail to write your own implementation.

No, how you are doing it is correct.

http://www.w3.org/MarkUp/html-spec/html-spec_8.html#SEC8.2.2

Not exactly the same problem for me, because I was running the last java version 1.8.0_92, IE v11 and windows 7.

My situation was also that I had Chrome as the default browser.

So what for me fixed it, was to set IExplorer as the default browser again, uninstall Java, go to Java.com using the IExplorer, and from the IExplorer download and install Java again to the last version.

I would guess your query isn't running as expected and you are getting to the return line with undefined variables.

Also, the way you are doing the variable assignment, you would be overwriting the same variable with each loop iteration, so you wouldn't return the entire result set.

Finally, it seems odd to return a numerically-keyed result set instead of an associatively-keyed one. Consider naming only the fields needed in the SELECT and keeping the key assignments. So something like this:

Function ShowDataPatient($idURL){
       $query =" select * from cmu_list_insurance,cmu_home,cmu_patient where cmu_home.home_id = (select home_id from cmu_patient where patient_hn like '%$idURL%')
                 AND cmu_patient.patient_hn like '%$idURL%'
                 AND cmu_list_insurance.patient_id like (select patient_id from cmu_patient where patient_hn like '%$idURL%') ";

   $result = pg_query($query) or die('Query failed: ' . pg_last_error());

   $return = array();
   while ($row = pg_fetch_array($result)){
       $return[] = $row;
   }          

   return $return;
}

You might also consider opening a question about how to improve your query, is it is pretty heinous as it stands now.

In Jackson 2.4, you can convert as follows:

MyClass newJsonNode = jsonObjectMapper.treeToValue(someJsonNode, MyClass.class);

where jsonObjectMapper is a Jackson ObjectMapper.

In older versions of Jackson, it would be

MyClass newJsonNode = jsonObjectMapper.readValue(someJsonNode, MyClass.class);

…or a shorter try:

library(XML)
library(RCurl)
library(rlist)
theurl <- getURL("https://en.wikipedia.org/wiki/Brazil_national_football_team",.opts = list(ssl.verifypeer = FALSE) )
tables <- readHTMLTable(theurl)
tables <- list.clean(tables, fun = is.null, recursive = FALSE)
n.rows <- unlist(lapply(tables, function(t) dim(t)[1]))

the picked table is the longest one on the page

tables[[which.max(n.rows)]]

You can do so from within vim and use its own windows or tabs.

One way to go is to utilize the built-in file explorer; activate it via :Explore, or :Texplore for a tabbed interface (which I find most comfortable).

:Texplore (and :Sexplore) will also guard you from accidentally exiting the current buffer (editor) on :q once you're inside the explorer.

To toggle between open tabs when using tab pages use gt or gT (next tab and previous tab, respectively).

See also Using tab pages on the vim wiki.

It looks like you already have a solution. To make things easier, why not just put your command in a bash script (with a short name) and just run that instead of typing out that 'long' command every time?

Most layout managers work best with a component's preferredSize, and most GUI's are best off allowing the components they contain to set their own preferredSizes based on their content or properties. To use these layout managers to their best advantage, do call pack() on your top level containers such as your JFrames before making them visible as this will tell these managers to do their actions -- to layout their components.

Often when I've needed to play a more direct role in setting the size of one of my components, I'll override getPreferredSize and have it return a Dimension that is larger than the super.preferredSize (or if not then it returns the super's value).

For example, here's a small drag-a-rectangle app that I created for another question on this site:

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;

public class MoveRect extends JPanel {
   private static final int RECT_W = 90;
   private static final int RECT_H = 70;
   private static final int PREF_W = 600;
   private static final int PREF_H = 300;
   private static final Color DRAW_RECT_COLOR = Color.black;
   private static final Color DRAG_RECT_COLOR = new Color(180, 200, 255);
   private Rectangle rect = new Rectangle(25, 25, RECT_W, RECT_H);
   private boolean dragging = false;
   private int deltaX = 0;
   private int deltaY = 0;

   public MoveRect() {
      MyMouseAdapter myMouseAdapter = new MyMouseAdapter();
      addMouseListener(myMouseAdapter);
      addMouseMotionListener(myMouseAdapter);
   }

   @Override
   protected void paintComponent(Graphics g) {
      super.paintComponent(g);
      if (rect != null) {
         Color c = dragging ? DRAG_RECT_COLOR : DRAW_RECT_COLOR;
         g.setColor(c);
         Graphics2D g2 = (Graphics2D) g;
         g2.draw(rect);
      }
   }

   @Override
   public Dimension getPreferredSize() {
      return new Dimension(PREF_W, PREF_H);
   }

   private class MyMouseAdapter extends MouseAdapter {

      @Override
      public void mousePressed(MouseEvent e) {
         Point mousePoint = e.getPoint();
         if (rect.contains(mousePoint)) {
            dragging = true;
            deltaX = rect.x - mousePoint.x;
            deltaY = rect.y - mousePoint.y;
         }
      }

      @Override
      public void mouseReleased(MouseEvent e) {
         dragging = false;
         repaint();
      }

      @Override
      public void mouseDragged(MouseEvent e) {
         Point p2 = e.getPoint();
         if (dragging) {
            int x = p2.x + deltaX;
            int y = p2.y + deltaY;
            rect = new Rectangle(x, y, RECT_W, RECT_H);
            MoveRect.this.repaint();
         }
      }
   }

   private static void createAndShowGui() {
      MoveRect mainPanel = new MoveRect();

      JFrame frame = new JFrame("MoveRect");
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.getContentPane().add(mainPanel);
      frame.pack();
      frame.setLocationByPlatform(true);
      frame.setVisible(true);
   }

   public static void main(String[] args) {
      SwingUtilities.invokeLater(new Runnable() {
         public void run() {
            createAndShowGui();
         }
      });
   }
}

Note that my main class is a JPanel, and that I override JPanel's getPreferredSize:

public class MoveRect extends JPanel {
   //.... deleted constants

   private static final int PREF_W = 600;
   private static final int PREF_H = 300;

   //.... deleted fields and constants

   //... deleted methods and constructors

   @Override
   public Dimension getPreferredSize() {
      return new Dimension(PREF_W, PREF_H);
   }

Also note that when I display my GUI, I place it into a JFrame, call pack(); on the JFrame, set its position, and then call setVisible(true); on my JFrame:

   private static void createAndShowGui() {
      MoveRect mainPanel = new MoveRect();

      JFrame frame = new JFrame("MoveRect");
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.getContentPane().add(mainPanel);
      frame.pack();
      frame.setLocationByPlatform(true);
      frame.setVisible(true);
   }

   public static void main(String[] args) {
      SwingUtilities.invokeLater(new Runnable() {
         public void run() {
            createAndShowGui();
         }
      });
   }
}

Here is the Jquery browser detect plugin to identify browser/os detection.

You can use this for styling purpose after including the plugin.

$("html").addClass($.os.name);
$("body").addClass($.browser.className);
$("body").addClass($.browser.name);

As adapted from Erika Ehrli's blog, this should do it:

XmlDocument doc = new XmlDocument();
doc.LoadXml("<item><name>wrench</name></item>");
// Save the document to a file and auto-indent the output.
using (XmlTextWriter writer = new XmlTextWriter("data.xml", null)) {
    writer.Formatting = Formatting.Indented;
    doc.Save(writer);
}

I suggest reading the git man page to fully understand how ignore work, and in the future you'll thank me ;)

Relevant to your problem:

Two consecutive asterisks ("**") in patterns matched against full pathname may have special meaning:

A leading "**" followed by a slash means match in all directories. For example, "**/foo" matches file or directory "foo" anywhere, the same     as pattern "foo". "**/foo/bar" matches file or directory "bar" anywhere that is directly under directory "foo".

A trailing "/**" matches everything inside. For example, "abc/**" matches all files inside directory "abc", relative to the location of the .    gitignore file, with infinite depth.

A slash followed by two consecutive asterisks then a slash matches zero or more directories. For example, "a/**/b" matches "a/b", "a/x/b",     "a/x/y/b" and so on.

Other consecutive asterisks are considered invalid.

The quoting rules are painful. I think you want:

SELECT nextval('foo."SQ_ID"');

to prevent case-folding of SQ_ID.

Try this it will work fine.

<script>
function echoHello(){
 alert("<?PHP hello(); ?>");
 }
</script>

<?PHP
FUNCTION hello(){
 echo "Call php function on onclick event.";
 }

?>

<button onclick="echoHello()">Say Hello</button>

Several answers show dangerous examples. OP's example [ $a == $b ] specifically used unquoted variable substitution (as of Oct '17 edit). For [...] that is safe for string equality.

But if you're going to enumerate alternatives like [[...]], you must inform also that the right-hand-side must be quoted. If not quoted, it is a pattern match! (From bash man page: "Any part of the pattern may be quoted to force it to be matched as a string.").

Here in bash, the two statements yielding "yes" are pattern matching, other three are string equality:

$ rht="A*"
$ lft="AB"
$ [ $lft = $rht ] && echo yes
$ [ $lft == $rht ] && echo yes
$ [[ $lft = $rht ]] && echo yes
yes
$ [[ $lft == $rht ]] && echo yes
yes
$ [[ $lft == "$rht" ]] && echo yes
$

Moq cannot mock a static member of a class.

When designing code for testability it's important to avoid static members (and singletons). A design pattern that can help you refactoring your code for testability is Dependency Injection.

This means changing this:

public class Foo
{
    public Foo()
    {
        Bar = new Bar();
    }
}

to

public Foo(IBar bar)
{
    Bar = bar;
}

This allows you to use a mock from your unit tests. In production you use a Dependency Injection tool like Ninject or Unity wich can wire everything together.

I wrote a blog about this some time ago. It explains which patterns an be used for better testable code. Maybe it can help you: Unit Testing, hell or heaven?

Another solution could be to use the Microsoft Fakes Framework. This is not a replacement for writing good designed testable code but it can help you out. The Fakes framework allows you to mock static members and replace them at runtime with your own custom behavior.

A simple way to do it would be to just annotate the Quartz Jobs with @Component annotation, and then Spring will do all the DI magic for you, as it is now recognized as a Spring bean. I had to do something similar for an AspectJ aspect - it was not a Spring bean until I annotated it with the Spring @Component stereotype.

If you do not copy and paste the full file path addess e.g. C:\Program Files\Git\bin\git.exe, in the 'path to executable' field when configuring Git, it can lead to errors. Windows 8 & 10 for instance have a 'copy path' functionality which really works and helps to get full path name. Mac should have something similar. Its always best to use that rather clicking in the path address address bar and copying. This does not usually give the full file path and may cause a lot of troubles if you forget to edit the path at its destination.

Path copycopy is also very good add-on for copying full path

As for this date (February 2017), it seems that mailchimp has integrated something similar to what gbinflames suggests into their own javascript generated form.

You don't need any further intervention now as mailchimp will convert the form to an ajax submitted one when javascript is enabled.

All you need to do now is just paste the generated form from the embed menu into your html page and NOT modify or add any other code.

This simply works. Thanks MailChimp!

The above solutions didn't work for me because I needed to check out a specific tagged version of the tree. That's how cvs export is meant to be used, by the way. git checkout-index doesn't take the tag argument, as it checks out files from index. git checkout <tag> would change the index regardless of the work tree, so I would need to reset the original tree. The solution that worked for me was to clone the repository. Shared clone is quite fast and doesn't take much extra space. The .git directory can be removed if desired.

git clone --shared --no-checkout <repository> <destination>
cd <destination>
git checkout <tag>
rm -rf .git

Newer versions of git should support git clone --branch <tag> to check out the specified tag automatically:

git clone --shared --branch <tag> <repository> <destination>
rm -rf <destination>/.git

It would seem that is.nan doesn't actually have a method for data frames, unlike is.na. So, let's fix that!

is.nan.data.frame <- function(x)
do.call(cbind, lapply(x, is.nan))

data123[is.nan(data123)] <- 0

string[] lines = File.ReadLines("c:\\file.txt").ToArray();

Although one wonders why you'll want to do that when ReadAllLines works just fine.

Or perhaps you just want to enumerate with the return value of File.ReadLines:

var lines = File.ReadAllLines("c:\\file.txt");
foreach (var line in lines)
{
    Console.WriteLine("\t" + line);
}

Each deployed webapp has a context.xml file that lives in

$CATALINA_BASE/conf/[enginename]/[hostname]

(conf/Catalina/localhost by default)

and has the same name as the webapp (manager.xml in this case). If no file is present, default values are used.

So, you need to create a file conf/Catalina/localhost/manager.xml and specify the rule you want to allow remote access. For example, the following content of manager.xml will allow access from all machines:

<Context privileged="true" antiResourceLocking="false" 
         docBase="${catalina.home}/webapps/manager">
    <Valve className="org.apache.catalina.valves.RemoteAddrValve" allow="^YOUR.IP.ADDRESS.HERE$" />
</Context>

Note that the allow attribute of the Valve element is a regular expression that matches the IP address of the connecting host. So substitute your IP address for YOUR.IP.ADDRESS.HERE (or some other useful expression).

Other Valve classes cater for other rules (e.g. RemoteHostValve for matching host names). Earlier versions of Tomcat use a valve class org.apache.catalina.valves.RemoteIpValve for IP address matching.

Once the changes above have been made, you should be presented with an authentication dialog when accessing the manager URL. If you enter the details you have supplied in tomcat-users.xml you should have access to the Manager.

Just create a folder Files under src and put your file there. This will look like src/Files/myFile.txt

Note: In your code you need to specify like this Files/myFile.txt e.g.

getResource("Files/myFile.txt");

So when you build your project and run the .jar file this should be able to work.

just use, (in TSQL)

SELECT convert(varchar, columnName, 101)

in MySQL

SELECT DATE_FORMAT(columnName, '%m/%d/%Y')

Below is the function to change the URL without reloading the page. It is only supported for HTML5.

  function ChangeUrl(page, url) {
        if (typeof (history.pushState) != "undefined") {
            var obj = {Page: page, Url: url};
            history.pushState(obj, obj.Page, obj.Url);
        } else {
            window.location.href = "homePage";
            // alert("Browser does not support HTML5.");
        }
    }

  ChangeUrl('Page1', 'homePage');

Nice question/answers.

Just want to point out that C pointers and arrays are not the same, although in this case the difference is not essential.

Consider the following declarations:

int a[10];
int* p = a;

In a.out, the symbol a is at an address that's the beginning of the array, and symbol p is at an address where a pointer is stored, and the value of the pointer at that memory location is the beginning of the array.