using jquery-cookie

I find this library helpful. 3.128 kb of pure convenience.

add script

<script src="/path/to/jquery.cookie.js"></script>

set cookie

$.cookie('name', 'value');

read cookie

$.cookie('name');

Two's complement is mainly used for the following reasons:

1. To avoid multiple representations of 0
2. To avoid keeping track of carry bit (as in one's complement) in case of an overflow.
3. Carrying out simple operations like addition and subtraction becomes easy.

Per the TypeScript 2.3 release notes on "New --downlevelIteration":

for..of statements, Array Destructuring, and Spread elements in Array, Call, and New expressions support Symbol.iterator in ES5/E3 if available when using --downlevelIteration

This is not enabled by default! Add "downlevelIteration": true to your tsconfig.json, or pass --downlevelIteration flag to tsc, to get full iterator support.

With this in place, you can write for (let keyval of myMap) {...} and keyval's type will be automatically inferred.

Why is this turned off by default? According to TypeScript contributor @aluanhaddad,

It is optional because it has a very significant impact on the size of generated code, and potentially on performance, for all uses of iterables (including arrays).

If you can target ES2015 ("target": "es2015" in tsconfig.json or tsc --target ES2015) or later, enabling downlevelIteration is a no-brainer, but if you're targeting ES5/ES3, you might benchmark to ensure iterator support doesn't impact performance (if it does, you might be better off with Array.from conversion or forEach or some other workaround).

I found paramiko to be a bit too low-level, and Fabric not especially well-suited to being used as a library, so I put together my own library called spur that uses paramiko to implement a slightly nicer interface:

import spur

shell = spur.SshShell(hostname="localhost", username="bob", password="password1")
result = shell.run(["echo", "-n", "hello"])
print result.output # prints hello

If you need to run inside a shell:

shell.run(["sh", "-c", "echo -n hello"])

The excellent book "Algorithm Design Manual" by Skienna contains a huge repository of Algorithms and Data structure.

For tons of problems, data structures and algorithm are described, compared, and discusses the practical usage. The author also provides references to implementations and the original research papers.

The book is great to have it on your desk if you search the best data structure for your problem to solve. It is also very helpful for interview preparation.

Another great resource is the NIST Dictionary of Data structures and algorithms.

Is your server sending data as Content-Type "*/json"? If not, modify the response headers accordingly. Sending "application/json" would be fine, for example.

Also, see the Stack Overflow question How to detect what .NET Framework versions and service packs are installed? which also mentions:

There is an official Microsoft answer to this question at the knowledge base article [How to determine which versions and service pack levels of the Microsoft .NET Framework are installed][2]

Article ID: 318785 - Last Review: November 7, 2008 - Revision: 20.1 How to determine which versions of the .NET Framework are installed and whether service packs have been applied.

Unfortunately, it doesn't appear to work, because the mscorlib.dll version in the 2.0 directory has a 2.0 version, and there is no mscorlib.dll version in either the 3.0 or 3.5 directories even though 3.5 SP1 is installed ... Why would the official Microsoft answer be so misinformed?

.bak files are database backups. You can restore the backup with the method below:

How to: Restore a Database Backup (SQL Server Management Studio)

Like @SharadHolani said. This won't match every word beginning with "stop"

. Only if it's at the beginning of a line like "stop going". @Waxo gave the right answer:

This one is slightly better, if you want to match any word beginning with "stop" and containing nothing but letters from A to Z.

\bstop[a-zA-Z]*\b

This would match all

stop (1)

stop random (2)

stopping (3)

want to stop (4)

please stop (5)

But

/^stop[a-zA-Z]*/

would only match (1) until (3), but not (4) & (5)

/appointments?users=1d1,1d2.. 

is fine. It's pretty much your only sensible option since you can't pass in a body with a GET.

Look at http://ss64.com/nt/if.html for an answer; the command is IF [%1]==[] GOTO NO_ARGUMENT or similar.

Java 8 LocalDate API

LocalDate.now().plusDays(1L);

Without the loop:

function decimalToHex(d) {
  var hex = Number(d).toString(16);
  hex = "000000".substr(0, 6 - hex.length) + hex;
  return hex;
}

// Or "#000000".substr(0, 7 - hex.length) + hex;
// Or whatever
// *Thanks to MSDN

Also isn't it better not to use loop tests that have to be evaluated?

For example, instead of:

for (var i = 0; i < hex.length; i++){}

have

for (var i = 0, var j = hex.length; i < j; i++){}

Of course, the problem is all about getting your height back. But how can you do that if you don't know the height ahead of time? Well, if you know what aspect ratio you want to give the container (and keep it responsive), you can get your height back by adding padding to another child of the container, expressed as a percentage.

You can even add a dummy div to the container and set something like padding-top: 56.25% to give the dummy element a height that is a proportion of the container's width. This will push out the container and give it an aspect ratio, in this case 16:9 (56.25%).

Padding and margin use the percentage of the width, that's really the trick here.

Maven will fail the build if it detects a cycle, as the dependencies must be a tree.

You may find that you have additional declarations in the manifest.mf over those defined in the pom.xml. any extra declaration could introduce a cycle that wouldn't be apparent to Maven.

Made an improvement code by @Ipsita - for use asynchronous read\write file I/O

readonly string logPath = @"FilePath";
...
public async Task WriteToLogAsync(string dataToWrite)
{
    TextReader tr = new StreamReader(logPath);
    string data = await tr.ReadLineAsync();
    tr.Close();

    TextWriter tw = new StreamWriter(logPath);
    await tw.WriteLineAsync(data + dataToWrite);
    tw.Close();
}
...
await WriteToLogAsync("Write this to file");

<input type="text" class="form-control timepicker2" ng-model='programRow.StationAuxiliaryTime.ST88' />

accessing scope value

assume that programRow.StationAuxiliaryTime is an array of object

 $('.timepicker2').on('click', function () 
    {
            var currentElement = $(this);

            var scopeValues = angular.element(currentElement).scope();
            var model = currentElement.attr('ng-model');
            var stationNumber = model.split('.')[2];
            var val = '';
            if (model.indexOf("StationWaterTime") > 0) {
                val = scopeValues.programRow.StationWaterTime[stationNumber];
            }
            else {
                val = scopeValues.programRow.StationAuxiliaryTime[stationNumber];
            }
            currentElement.timepicker('setTime', val);
        });

I personally need to ensure the page keeps state, so all the text boxes and other input fields retain their values. by doing meta refresh it's like a new post, IsPostBack is always false so all your controls are in the initialized state again. To retain state put this at the end of your Page_Load(). create a hidden button on the page with an event hooked up, something like butRefresh with event butRefresh_Click(...). This code sets a timer on the page to fire a postback just like a user clicked the refresh button themselves. all state and session is retained. Enjoy! (P.S. you may need to put the directive in the @Page header EnableEventValidation="false" if you receive an error on postback.

//tell the browser to post back again in 5 seconds while keeping state of all controls
ClientScript.RegisterClientScriptBlock(this.GetType(), "refresh", "<script>setTimeout(function(){ " + ClientScript.GetPostBackClientHyperlink(butRefresh, "refresh") + " },5000);</script>");

Things have moved on a bit since the question was asked - it is now possible to use a MutationObserver to detect changes in the 'style' attribute of an element, no jQuery required:

var observer = new MutationObserver(function(mutations) {
    mutations.forEach(function(mutationRecord) {
        console.log('style changed!');
    });    
});

var target = document.getElementById('myId');
observer.observe(target, { attributes : true, attributeFilter : ['style'] });

The argument that gets passed to the callback function is a MutationRecord object that lets you get hold of the old and new style values.

Support is good in modern browsers including IE 11+.

To select and element where you know only the attribute value you can use the below jQuery script

var src = $('.conversation_img[alt="example"]').attr('src');

Please refer the jQuery Documentation for attribute equals selectors

Please also refer to the example in Demo

Following is the code incase you are not able to access the demo..

HTML

<div>
    <img alt="example" src="\images\show.jpg" />
    <img  alt="exampleAll" src="\images\showAll.jpg" />  

</div>

SCRIPT JQUERY

var src = $('img[alt="example"]').attr('src');
alert("source of image with alternate text = example - " + src);


var srcAll = $('img[alt="exampleAll"]').attr('src');
alert("source of image with alternate text = exampleAll - " + srcAll );

Output will be

Two Alert messages each having values

1. source of image with alternate text = example - \images\show.jpg
2. source of image with alternate text = exampleAll - \images\showAll.jpg

The previous answers did not work for me, so I decided to improve this.

You should work with url(''), and not with value.

<li *ngFor="let item of items">
  <div
    class="img-wrapper"
    [ngStyle]="{'background-image': !item.featured ? 'url(\'images/img1.png\')' : 'url(\'images/img2.png\')'}">
  </div>
</li>

'So from this discussion i am thinking this should be the code then.

Sub Button1_Click()
    Dim excel As excel.Application
    Dim wb As excel.Workbook
    Dim sht As excel.Worksheet
    Dim f As Object

    Set f = Application.FileDialog(3)
    f.AllowMultiSelect = False
    f.Show

    Set excel = CreateObject("excel.Application")
    Set wb = excel.Workbooks.Open(f.SelectedItems(1))
    Set sht = wb.Worksheets("Data")

    sht.Activate
    sht.Columns("A:G").Copy
    Range("A1").PasteSpecial Paste:=xlPasteValues


    wb.Close
End Sub

'Let me know if this is correct or a step was missed. Thx.

Forgot to relate to the first code snippet. I wouldn't use forEach at all. Since you are collecting the elements of the Stream into a List, it would make more sense to end the Stream processing with collect. Then you would need peek in order to set the ID.

List<Entry> updatedEntries = 
    entryList.stream()
             .peek(e -> e.setTempId(tempId))
             .collect (Collectors.toList());

For the second snippet, forEach can execute multiple expressions, just like any lambda expression can :

entryList.forEach(entry -> {
  if(entry.getA() == null){
    printA();
  }
  if(entry.getB() == null){
    printB();
  }
  if(entry.getC() == null){
    printC();
  }
});

However (looking at your commented attempt), you can't use filter in this scenario, since you will only process some of the entries (for example, the entries for which entry.getA() == null) if you do.

From ?read.table: The number of data columns is determined by looking at the first five lines of input (or the whole file if it has less than five lines), or from the length of col.names if it is specified and is longer. This could conceivably be wrong if fill or blank.lines.skip are true, so specify col.names if necessary.

So, perhaps your data file isn't clean. Being more specific will help the data import:

d = read.table("foobar.txt", 
               sep="\t", 
               col.names=c("id", "name"), 
               fill=FALSE, 
               strip.white=TRUE)

will specify exact columns and fill=FALSE will force a two column data frame.

?hange USB connection mode from MTP to Camera (for Nexus 7) or, possibly, to Mass Storage or something else (for other devices). This option is usually under Settings -> Storage. Then connect the device again, you'll get the authorization dialog.

MTP has been known to interfere with USB debugging -- these two did not work together at all on majority of older devices. Nexus 7 and many newer devices do allow both to work alongside, but this particular issue suggests it's not all that smooth yet.

Bonus -- checklist for when adb is not behaving well:

• adb kill-server followed by adb start-server
• (on device) Settings -> Developer Options -> USB Debugging -- switch off and on
• [Windows] Make sure you have the proper driver (your best bet is Universal Adb Driver by Koushik Dutta -- will handle any device)
• [Windows] Try turning off all fancy on-the-fly anti-malware scanners/firewalls
• [Linux] Make sure you have the proper UDEV rule in /etc/udev/rules.d/51-android.rules (again, universal solution: https://github.com/snowdream/51-android)
• [Linux] Make sure everything under ~/.android is owned by you, not root (and upvote this answer)
• restart device (yes, surprisingly, this is a valid measure, too)
• (Obviously) replug cable, try different cable, different port, remove any extender cables

I also had similar problems when trying to link static compiled fontconfig and expat into a linux shared object:

/opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld: /3rdparty/fontconfig/lib/linux-x86_64/libfontconfig.a(fccfg.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld: /3rdparty/expat/lib/linux-x86_64/libexpat.a(xmlparse.o): relocation R_X86_64_PC32 against symbol `stderr@@GLIBC_2.2.5' can not be used when making a shared object; recompile with -fPIC
[...]

This contrary to the fact that I was already passing -fPIC flags though CFLAGS variable, and other compilers/linkers variants (clang/lld) were perfectly working with the same build configuration. It ended up that these dependencies control position-independent code settings through despicable autoconf scripts and need --with-pic switch during build configuration on linux gcc/ld combination, and its lack probably overrides same the setting in CFLAGS. Pass the switch to configure script and the dependencies will be correctly compiled with -fPIC.

First in your terminal:

rails g migration change_date_format_in_my_table

Then in your migration file:

For Rails >= 3.2:

class ChangeDateFormatInMyTable < ActiveRecord::Migration
  def up
    change_column :my_table, :my_column, :datetime
  end

  def down
    change_column :my_table, :my_column, :date
  end
end

I recommend to use memcpy() for copying data. Also if we assign a buffer to another as array2 = array1 , both array have same memory and any change in the arrary1 deflects in array2 too. But we use memcpy, both buffer have different array. I recommend memcpy() because strcpy and related function do not copy NULL character.

git clone --single-branch --branch <branchname> <remote-repo>

The --single-branch option is valid from version 1.7.10 and later.

Please see also the other answer which many people prefer.

You may also want to make sure you understand the difference. And the difference is: by invoking git clone --branch <branchname> url you're fetching all the branches and checking out one. That may, for instance, mean that your repository has a 5kB documentation or wiki branch and 5GB data branch. And whenever you want to edit your frontpage, you may end up cloning 5GB of data.

Again, that is not to say git clone --branch is not the way to accomplish that, it's just that it's not always what you want to accomplish, when you're asking about cloning a specific branch.

This should work:

txtfarmersize = Convert.ToInt32(reader["farmsize"]);

Motivation

Sometimes I have been getting some errors when you want to pass httpBody serialized to Data from Dictionary, which on most cases is due to the wrong encoding or malformed data due to non NSCoding conforming objects in the Dictionary.

Solution

Depending on your requirements one easy solution would be to create a String instead of Dictionary and convert it to Data. You have the code samples below written on Objective-C and Swift 3.0.

Objective-C

// Create the URLSession on the default configuration
NSURLSessionConfiguration *defaultSessionConfiguration = [NSURLSessionConfiguration defaultSessionConfiguration];
NSURLSession *defaultSession = [NSURLSession sessionWithConfiguration:defaultSessionConfiguration];

// Setup the request with URL
NSURL *url = [NSURL URLWithString:@"yourURL"];
NSMutableURLRequest *urlRequest = [NSMutableURLRequest requestWithURL:url];

// Convert POST string parameters to data using UTF8 Encoding
NSString *postParams = @"api_key=APIKEY&[email protected]&password=password";
NSData *postData = [postParams dataUsingEncoding:NSUTF8StringEncoding];

// Convert POST string parameters to data using UTF8 Encoding
[urlRequest setHTTPMethod:@"POST"];
[urlRequest setHTTPBody:postData];

// Create dataTask
NSURLSessionDataTask *dataTask = [defaultSession dataTaskWithRequest:urlRequest completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) {
    // Handle your response here
}];

// Fire the request
[dataTask resume];

Swift

// Create the URLSession on the default configuration
let defaultSessionConfiguration = URLSessionConfiguration.default
let defaultSession = URLSession(configuration: defaultSessionConfiguration)

// Setup the request with URL
let url = URL(string: "yourURL")
var urlRequest = URLRequest(url: url!)  // Note: This is a demo, that's why I use implicitly unwrapped optional

// Convert POST string parameters to data using UTF8 Encoding
let postParams = "api_key=APIKEY&[email protected]&password=password"
let postData = postParams.data(using: .utf8)

// Set the httpMethod and assign httpBody
urlRequest.httpMethod = "POST"
urlRequest.httpBody = postData

// Create dataTask
let dataTask = defaultSession.dataTask(with: urlRequest) { (data, response, error) in
    // Handle your response here
}

// Fire the request
dataTask.resume()

The mod function is defined as the amount by which a number exceeds the largest integer multiple of the divisor that is not greater than that number. So in your case of

-13 % 64

the largest integer multiple of 64 that does not exceed -13 is -64. Now, when you subtract -13 from -64 it equals 51 -13 - (-64) = -13 + 64 = 51

In the Oracle SQL-plus:

shift+del

I wanted to add an import path, for another project elsewhere in my workspace. MacOS Catalina 10.15.5 PyCharm Community 2020.1.1

PyCharm - Preferences - Project interpreter - Cog symbol - Show All

At the bottom of that dialog, it shows 5 buttons: Plus, Minus, Pencil, Funnel, and Directory tree.

Click Directory tree. You can now use the Plus button in the new dialog to add your 'external library' search path.

If successful, you should now see the directory name in the "External Libraries" pane in the Project panel.

I think better to used

$result->isEmpty();

The isEmpty method returns true if the collection is empty; otherwise, false is returned.

Tweaked version from Techie Delight:

#include <string>
#include <vector>

std::vector<std::string> split(const std::string& str, char delim) {
    std::vector<std::string> strings;
    size_t start;
    size_t end = 0;
    while ((start = str.find_first_not_of(delim, end)) != std::string::npos) {
        end = str.find(delim, start);
        strings.push_back(str.substr(start, end - start));
    }
    return strings;
}

in most cases, got no authentication method error when using the wrong username for logging in. But I do find something else if you still struggle with connection issue and you have tried all the options above.

I created couple Linux VM and try to reproduce such connection issue, one thing I found is, when AWS asked you name your key pair, DO NOT user blank space (" ") and dot (".") in key pair name, even AWS actually allow you to do so.

ex. when I named the key pair as "AWS.FREE.LINUX", connection always be refused. When I named as "AWS_FREE_LINUX", everything works fine.

Hope this will help a little bit.

If you are using Zsh, then try to add this line in ~/.zshrc file & restart terminal.

export JAVA_HOME=$(/usr/libexec/java_home) 

I defined own helper function to convert timedelta object to 'HH:MM:SS' format - only hours, minutes and seconds, without changing hours to days.

def format_timedelta(td):
    hours, remainder = divmod(td.total_seconds(), 3600)
    minutes, seconds = divmod(remainder, 60)
    hours, minutes, seconds = int(hours), int(minutes), int(seconds)
    if hours < 10:
        hours = '0%s' % int(hours)
    if minutes < 10:
        minutes = '0%s' % minutes
    if seconds < 10:
        seconds = '0%s' % seconds
    return '%s:%s:%s' % (hours, minutes, seconds)

If feed isn't well-formed XML, you're supposed to reject it, no exceptions. You're entitled to call feed creator a bozo.

Otherwise you're paving way to mess that HTML ended up in.

For some reason in Angular 6 simply importing the FormsModule did not fix my issue. What finally fixed my issue was by adding

import { CommonModule } from '@angular/common';

@NgModule({
  imports: [CommonModule],
})

export class MyClass{
}

Windows 10 Home Edition does not have Local Users and Groups option so that is the reason you aren't able to see that in Computer Management.

You can use User Accounts by pressing Window+R, typing netplwiz and pressing OK as described here.

Using Excel 2010 x64. XY plot: I could not see no tabs (it is late and I am probably tired blind, 250 limit?). Here is what worked for me:

Swap the data columns, to end with X_data in column A and Y_data in column B.

My original data had Y_data in column A and X_data in column B, and the graph was rotated 90deg clockwise. I was suffering. Then it hit me: an Excel XY plot literally wants {x,y} pairs, i.e. X_data in first column and Y_data in second column. But it does not tell you this right away. For me an XY plot means Y=f(X) plotted.

Adding these two lines fixed this problem for me

"responsive": true,
"bAutoWidth": true

There is now a responsive plugin available: https://datatables.net/extensions/responsive/. However, in my experience I have found that there are still a few bugs. It's still the best solution I've found so far.

Try to use the rack-cors gem. And add the header field in your Ajax call.

There are subtle differences as to how the fileName you are passing is interpreted. Basically, you have 2 different methods: ClassLoader.getResourceAsStream() and Class.getResourceAsStream(). These two methods will locate the resource differently.

In Class.getResourceAsStream(path), the path is interpreted as a path local to the package of the class you are calling it from. For example calling, String.class.getResourceAsStream("myfile.txt") will look for a file in your classpath at the following location: "java/lang/myfile.txt". If your path starts with a /, then it will be considered an absolute path, and will start searching from the root of the classpath. So calling String.class.getResourceAsStream("/myfile.txt") will look at the following location in your class path ./myfile.txt.

ClassLoader.getResourceAsStream(path) will consider all paths to be absolute paths. So calling String.class.getClassLoader().getResourceAsStream("myfile.txt") and String.class.getClassLoader().getResourceAsStream("/myfile.txt") will both look for a file in your classpath at the following location: ./myfile.txt.

Everytime I mention a location in this post, it could be a location in your filesystem itself, or inside the corresponding jar file, depending on the Class and/or ClassLoader you are loading the resource from.

In your case, you are loading the class from an Application Server, so your should use Thread.currentThread().getContextClassLoader().getResourceAsStream(fileName) instead of this.getClass().getClassLoader().getResourceAsStream(fileName). this.getClass().getResourceAsStream() will also work.

Read this article for more detailed information about that particular problem.

Warning for users of Tomcat 7 and below

One of the answers to this question states that my explanation seems to be incorrect for Tomcat 7. I've tried to look around to see why that would be the case.

So I've looked at the source code of Tomcat's WebAppClassLoader for several versions of Tomcat. The implementation of findResource(String name) (which is utimately responsible for producing the URL to the requested resource) is virtually identical in Tomcat 6 and Tomcat 7, but is different in Tomcat 8.

In versions 6 and 7, the implementation does not attempt to normalize the resource name. This means that in these versions, classLoader.getResourceAsStream("/resource.txt") may not produce the same result as classLoader.getResourceAsStream("resource.txt") event though it should (since that what the Javadoc specifies). [source code]

In version 8 though, the resource name is normalized to guarantee that the absolute version of the resource name is the one that is used. Therefore, in Tomcat 8, the two calls described above should always return the same result. [source code]

As a result, you have to be extra careful when using ClassLoader.getResourceAsStream() or Class.getResourceAsStream() on Tomcat versions earlier than 8. And you must also keep in mind that class.getResourceAsStream("/resource.txt") actually calls classLoader.getResourceAsStream("resource.txt") (the leading / is stripped).

I know this question is old, but between all the answers, I miss one that is a common approach for this use-case in XSLT development.

I am imagining that the missing code from the OP looks something like this:

<xsl:template match="category">
    <xsl:choose>
        <xsl:when test="categoryName !=null">
            <xsl:value-of select="categoryName " />
        </xsl:when>
        <xsl:otherwise>
            <xsl:value-of select="other" />
        </xsl:otherwise>
    </xsl:choose>
</category>

And that the input looks something like this:

<categories>
    <category>
       <categoryName>Books</categoryName>
    </category>
    <category>
       <categoryName>Magazines</categoryName>
       <categoryName>Periodicals</categoryName>
       <categoryName>Journals</categoryName>
    </category>
    <category>
        <categoryName><!-- please fill in category --></categoryName>
    </category>
    <category>
        <categoryName />
    </category>
    <category />
</categories>

I.e., I assume there can be zero, empty, single or multiple categoryName elements. To deal with all these cases using xsl:choose-style constructs, or in other words, imperatively, is quickly getting messy (even more so if elements can be at different levels!). A typical programming idiom in XSLT is using templates (hence the T in XSLT), which is declarative programming, not imperative (you don't tell the processor what to do, you just tell what you want output if certain conditions are met). For this use-case, that can look something like the following:

<!-- positive test, any category with a valid categoryName -->
<xsl:template match="category[categoryName[text()]]">
    <xsl:apply-templates />
</xsl:template>

<!-- any other category (without categoryName, "null", with comments etc) -->
<xsl:template match="category">
    <xsl:text>Category: Other</xsl:text>
</xsl:template>

<!-- matching the categoryName itself for easy handling of multiple names -->
<xsl:template match="categoryName">
    <xsl:text>Category: </xsl:text>
    <xsl:value-of select="." />
</xsl:template>

This works (with any XSLT version), because the first one above has a higher precedence (it has a predicate). The "fall-through" matching template, the second one, catches anything that is not valid. The third one then takes care of outputting the categoryName value in a proper way.

Note that in this scenario there is no need to specifially match categories or category, because the processor will automatically process all children, unless we tell it otherwise (in this example, the second and third template do not further process the children, because there is no xsl:apply-templates in them).

This approach is more easily extendible then the imperative approach, because it automically deals with multiple categories and it can be expanded for other elements or exceptions by just adding another matching template. Programming without if-branches.

Note: there is no such thing as null in XML. There is xsi:nil, but that is rarely used, especially rarely in untyped scenarios without a schema of some sort.

You can use the ProcessLifecycleOwner attaching a lifecycle observer to it.

  public class ForegroundLifecycleObserver implements LifecycleObserver {

    @OnLifecycleEvent(Lifecycle.Event.ON_CREATE)
    public void onAppCreated() {
        Timber.d("onAppCreated() called");
    }

    @OnLifecycleEvent(Lifecycle.Event.ON_START)
    public void onAppStarted() {
        Timber.d("onAppStarted() called");
    }

    @OnLifecycleEvent(Event.ON_RESUME)
    public void onAppResumed() {
        Timber.d("onAppResumed() called");
    }

    @OnLifecycleEvent(Event.ON_PAUSE)
    public void onAppPaused() {
        Timber.d("onAppPaused() called");
    }

    @OnLifecycleEvent(Event.ON_STOP)
    public void onAppStopped() {
        Timber.d("onAppStopped() called");
    }
}

then on the onCreate() of your Application class you call this:

ProcessLifecycleOwner.get().getLifecycle().addObserver(new ForegroundLifecycleObserver());

with this you will be able to capture the events of ON_PAUSE and ON_STOP of your application that happen when it goes in background.

As others said, class variables are shared between a given class and its subclasses. Class instance variables belong to exactly one class; its subclasses are separate.

Why does this behavior exist? Well, everything in Ruby is an object—even classes. That means that each class has an object of the class Class (or rather, a subclass of Class) corresponding to it. (When you say class Foo, you're really declaring a constant Foo and assigning a class object to it.) And every Ruby object can have instance variables, so class objects can have instance variables, too.

The trouble is, instance variables on class objects don't really behave the way you usually want class variables to behave. You usually want a class variable defined in a superclass to be shared with its subclasses, but that's not how instance variables work—the subclass has its own class object, and that class object has its own instance variables. So they introduced separate class variables with the behavior you're more likely to want.

In other words, class instance variables are sort of an accident of Ruby's design. You probably shouldn't use them unless you specifically know they're what you're looking for.

The most easiest way would be to use unfactor function from package varhandle which can accept a factor vector or even a dataframe:

unfactor(your_factor_variable)

This example can be a quick start:

x <- rep(c("a", "b", "c"), 20)
y <- rep(c(1, 1, 0), 20)

class(x)  # -> "character"
class(y)  # -> "numeric"

x <- factor(x)
y <- factor(y)

class(x)  # -> "factor"
class(y)  # -> "factor"

library(varhandle)
x <- unfactor(x)
y <- unfactor(y)

class(x)  # -> "character"
class(y)  # -> "numeric"

You can also use it on a dataframe. For example the iris dataset:

sapply(iris, class)

Sepal.Length  Sepal.Width Petal.Length  Petal.Width      Species
   "numeric"    "numeric"    "numeric"    "numeric"     "factor"

# load the package
library("varhandle")
# pass the iris to unfactor
tmp_iris <- unfactor(iris)
# check the classes of the columns
sapply(tmp_iris, class)

Sepal.Length  Sepal.Width Petal.Length  Petal.Width      Species
   "numeric"    "numeric"    "numeric"    "numeric"  "character"

# check if the last column is correctly converted
tmp_iris$Species

  [1] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"    
  [6] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"    
 [11] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"    
 [16] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"    
 [21] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"    
 [26] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"    
 [31] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"
 [36] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"
 [41] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"
 [46] "setosa"     "setosa"     "setosa"     "setosa"     "setosa"
 [51] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [56] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [61] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [66] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [71] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [76] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [81] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [86] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [91] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
 [96] "versicolor" "versicolor" "versicolor" "versicolor" "versicolor"
[101] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[106] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[111] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[116] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[121] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[126] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[131] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[136] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[141] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"
[146] "virginica"  "virginica"  "virginica"  "virginica"  "virginica"

This is the required source code :

public static void openKeypad(final Context context, final View v) 
 {
new Handler().postDelayed(new Runnable() 
{
    @Override
    public void run() 
    {
        InputMethodManager inputManager =   (InputMethodManager)context.getSystemService(Context.INPUT_METHOD_SERVICE); 
        inputManager.showSoftInput(v, InputMethodManager.SHOW_IMPLICIT);    
        Log.e("openKeypad", "Inside Handler");
    }
},300);}

For details , Please go through this link. This helped me. https://github.com/Nikhillosalka/Keyboard/blob/master/README.md

SELECT username FROM all_users ORDER BY username;

there is a function called isNaN it return true if it's (Not-a-number) , so u can check for a number this way

if(!isNaN(miscCharge))
{
   //do some thing if it's a number
}else{
   //do some thing if it's NOT a number
}

hope it works

Here is an end to end solution I implemented for streaming Android microphone audio to a server for playback: Android AudioRecord to Server over UDP Playback Issues

The delete operator allows you to remove a property from an object.

The following examples all do the same thing.

// Example 1
var key = "Cow";
delete thisIsObject[key]; 

// Example 2
delete thisIsObject["Cow"];

// Example 3
delete thisIsObject.Cow;

If you're interested, read Understanding Delete for an in-depth explanation.

At least three ways:

A regular expression:

var result = /[^/]*$/.exec("foo/bar/test.html")[0];

...which says "grab the series of characters not containing a slash" ([^/]*) at the end of the string ($). Then it grabs the matched characters from the returned match object by indexing into it ([0]); in a match object, the first entry is the whole matched string. No need for capture groups.

Live example

Using lastIndexOf and substring:

var str = "foo/bar/test.html";
var n = str.lastIndexOf('/');
var result = str.substring(n + 1);

lastIndexOf does what it sounds like it does: It finds the index of the last occurrence of a character (well, string) in a string, returning -1 if not found. Nine times out of ten you probably want to check that return value (if (n !== -1)), but in the above since we're adding 1 to it and calling substring, we'd end up doing str.substring(0) which just returns the string.

Using Array#split

Sudhir and Tom Walters have this covered here and here, but just for completeness:

var parts = "foo/bar/test.html".split("/");
var result = parts[parts.length - 1]; // Or parts.pop();

split splits up a string using the given delimiter, returning an array.

The lastIndexOf / substring solution is probably the most efficient (although one always has to be careful saying anything about JavaScript and performance, since the engines vary so radically from each other), but unless you're doing this thousands of times in a loop, it doesn't matter and I'd strive for clarity of code.

You can look at the following in linux

cd /root

ls -al

vi .mysql_history It may help

For large datasets a faster solution is required.

Making use of 'Text to Columns' functionality provides a fast solution.

Example based on column F, starting range at 25 to LastRow

Sub ConvTxt2Nr()

Dim SelectR As Range
Dim sht As Worksheet
Dim LastRow As Long

Set sht = ThisWorkbook.Sheets("DumpDB")

LastRow = sht.Cells(sht.Rows.Count, "F").End(xlUp).Row

Set SelectR = ThisWorkbook.Sheets("DumpDB").Range("F25:F" & LastRow)

SelectR.TextToColumns Destination:=Range("F25"), DataType:=xlDelimited, _
    TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=True, _
    Semicolon:=False, Comma:=False, Space:=False, Other:=False, FieldInfo _
    :=Array(1, 1), TrailingMinusNumbers:=True

End Sub

Try something like:

import pylab as p
p.plot(x,y)
p.axis('equal')
p.show()

In JUnit 4, another option for you may be to create an annotation to denote that the test needs to meet your custom criteria, then extend the default runner with your own and using reflection, base your decision on the custom criteria. It may look something like this:

public class CustomRunner extends BlockJUnit4ClassRunner {
    public CTRunner(Class<?> klass) throws initializationError {
        super(klass);
    }

    @Override
    protected boolean isIgnored(FrameworkMethod child) {
        if(shouldIgnore()) {
            return true;
        }
        return super.isIgnored(child);
    }

    private boolean shouldIgnore(class) {
        /* some custom criteria */
    }
}

slide_in_down.xml

<?xml version="1.0" encoding="utf-8"?>
<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate
        android:duration="@android:integer/config_longAnimTime"
        android:fromYDelta="0%p"
        android:toYDelta="100%p" />
</set>

slide_in_up.xml

<?xml version="1.0" encoding="utf-8"?>
<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate
        android:duration="@android:integer/config_longAnimTime"
        android:fromYDelta="100%p"
        android:toYDelta="0%p" />
</set>

slide_out_down.xml

<?xml version="1.0" encoding="utf-8"?>
<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate
        android:duration="@android:integer/config_longAnimTime"
        android:fromYDelta="-100%"
        android:toYDelta="0"
        />
</set>

slide_out_up.xml

<?xml version="1.0" encoding="utf-8"?>
<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate
        android:duration="@android:integer/config_longAnimTime"
        android:fromYDelta="0%p"
        android:toYDelta="-100%p"
        />
</set>

direction = down

            activity.getSupportFragmentManager()
                    .beginTransaction()
                    .setCustomAnimations(R.anim.slide_out_down, R.anim.slide_in_down)
                    .replace(R.id.container, new CardFrontFragment())
                    .commit();

direction = up

           activity.getSupportFragmentManager()
                    .beginTransaction()
                    .setCustomAnimations(R.anim.slide_in_up, R.anim.slide_out_up)
                    .replace(R.id.container, new CardFrontFragment())
                    .commit();

Direct link to the .Net-3.5-Full-Setup

http://download.microsoft.com/download/6/0/f/60fc5854-3cb8-4892-b6db-bd4f42510f28/dotnetfx35.exe

Direct link to the .Net-3.5-SP1-Full-Setup

http://download.microsoft.com/download/2/0/e/20e90413-712f-438c-988e-fdaa79a8ac3d/dotnetfx35.exe

Thanks to Dzmitry Lahoda!

echo "discreet";history -d $(history 1)

x86 is a 32 bit instruction set, x86_64 is a 64 bit instruction set... the difference is simple architecture. in case of windows os you better use the x86/32bit version for compatibility issues. in case of Linux you will not be able to use a 64 bit s/w if the os does not have the long mode flag.

Whatever I recommend if you have a windows 7 32 bit OS then go for 32bit or x86 binaries and as for Ubuntu 12.04 use command uname -a or grep lm /proc/cpuinfo (grep lm /proc/cpuinfo does not return value for 32 bit as 32 bit os does not has the cpuinfo flag) to know the architecture OS your OS then use the binaries according to your OS.

** Note. Remember you can always install 64 bit os in 32 bit system as long as it supports enhanced 64 bit.. 64 bit os works better some times for multi purpose work and also supports more ram than 32bits. also you can install 32bit s/w in 64 bit os..

** OS = Operating system.

This error happened because the image didn't load properly . So you have problem with the previous line cv2.imread my suggestion is :

• check if the images exist in the path you give

• check the count variable if he have valid number

If you ever run in a situation where you need to get the next char of the word using __next__(), remember to create a string_iterator and iterate over it and not the original string (it does not have the __next__() method)

In this example, when I find a char = [ I keep looking into the next word while I don't find ], so I need to use __next__

here a for loop over the string wouldn't help

myString = "'string' 4 '['RP0', 'LC0']' '[3, 4]' '[3, '4']'"
processedInput = ""
word_iterator = myString.__iter__()
for idx, char in enumerate(word_iterator):
    if char == "'":
        continue

    processedInput+=char

    if char == '[':
        next_char=word_iterator.__next__()
        while(next_char != "]"):
          processedInput+=next_char
          next_char=word_iterator.__next__()
        else:
          processedInput+=next_char

strgroupids = strgroupids.Remove(strgroupids.Length - 1);

MSDN:

String.Remove(Int32):

Deletes all the characters from this string beginning at a specified position and continuing through the last position

List<KeyValuePair<string, string>> kvpList = new List<KeyValuePair<string, string>>()
{
    new KeyValuePair<string, string>("Key1", "Value1"),
    new KeyValuePair<string, string>("Key2", "Value2"),
    new KeyValuePair<string, string>("Key3", "Value3"),
};

kvpList.Insert(0, new KeyValuePair<string, string>("New Key 1", "New Value 1"));

Using this code:

foreach (KeyValuePair<string, string> kvp in kvpList)
{
    Console.WriteLine(string.Format("Key: {0} Value: {1}", kvp.Key, kvp.Value);
}

the expected output should be:

Key: New Key 1 Value: New Value 1
Key: Key 1 Value: Value 1
Key: Key 2 Value: Value 2
Key: Key 3 Value: Value 3

The same will work with a KeyValuePair or whatever other type you want to use..

Edit -

To lookup by the key, you can do the following:

var result = stringList.Where(s => s == "Lookup");

You could do this with a KeyValuePair by doing the following:

var result = kvpList.Where (kvp => kvp.Value == "Lookup");

Last edit -

Made the answer specific to KeyValuePair rather than string.

[A-Za-z0-9_.-]*

This will also match for empty strings, if you do not want that exchange the last * for an +

The simpliest way is to install the needed package:

sudo apt-get install tesseract-ocr-eng  #for english
sudo apt-get install tesseract-ocr-tam  #for tamil
sudo apt-get install tesseract-ocr-deu  #for deutsch (German)

As you can notice, it opens the road to others languages (i.e. tesseract-ocr-fra).

I use typeof to determine if the variable I'm looking at is an object. If it is then I use instanceof to determine what kind it is

var type = typeof elem;
if (type == "number") {
    // do stuff
}
else if (type == "string") {
    // do stuff
}
else if (type == "object") { // either array or object
    if (elem instanceof Buffer) {
    // other stuff

I agree to Ashot and Cwan, but maybe you like to convert an ascii-cipher like '7' into an int like 7?

Then I recoomend:

char seven = '7';
int i = seven - '0'; 

or, maybe you get a warning,

int i = (int) (seven - '0'); 

corrected after comments, thanks.

select a.ip, a.os, a.hostname, a.port, a.protocol,
       b.state
from a
left join b on a.ip = b.ip 
           and a.port = b.port

I think this answer will give all the solutions for:

1. Number of characters in a given string
2. Number of words in a given string
3. Number of lines in a given string

 function NumberOf() { _x000D_
   var string = "Write a piece of code in any language of your choice that computes the total number of characters, words and lines in a given text. \n This is second line. \n This is third line.";_x000D_
_x000D_
   var length = string.length; //No of characters_x000D_
   var words = string.match(/\w+/g).length; //No of words_x000D_
   var lines = string.split(/\r\n|\r|\n/).length; // No of lines_x000D_
_x000D_
   console.log('Number of characters:',length);_x000D_
   console.log('Number of words:',words);_x000D_
   console.log('Number of lines:',lines);_x000D_
_x000D_
_x000D_
}_x000D_
_x000D_
NumberOf();

1. First you need to find length of the given string by string.length
2. Then you can find number of words by matching them with string string.match(/\w+/g).length
3. Finally you can split each line like this string.length(/\r\n|\r|\n/).length

I hope this can help those who are searching for these 3 answers.

have you tried:

.image_block{
text-align: center;
vertical-align: bottom;
}

Another approach is to use timestamp values:

end_time.timestamp() - start_time.timestamp()

Also remember that an uninstall can be initiated using the WMIC command:

wmic product get name --> This will list the names of all installed apps

wmic product where name='myappsname' call uninstall --> this will uninstall the app.

Source: http://www.java2s.com/Code/Java/File-Input-Output/Getextensionpathandfilename.htm

such an utility class :

class Filename {
  private String fullPath;
  private char pathSeparator, extensionSeparator;

  public Filename(String str, char sep, char ext) {
    fullPath = str;
    pathSeparator = sep;
    extensionSeparator = ext;
  }

  public String extension() {
    int dot = fullPath.lastIndexOf(extensionSeparator);
    return fullPath.substring(dot + 1);
  }

  public String filename() { // gets filename without extension
    int dot = fullPath.lastIndexOf(extensionSeparator);
    int sep = fullPath.lastIndexOf(pathSeparator);
    return fullPath.substring(sep + 1, dot);
  }

  public String path() {
    int sep = fullPath.lastIndexOf(pathSeparator);
    return fullPath.substring(0, sep);
  }
}

usage:

public class FilenameDemo {
  public static void main(String[] args) {
    final String FPATH = "/home/mem/index.html";
    Filename myHomePage = new Filename(FPATH, '/', '.');
    System.out.println("Extension = " + myHomePage.extension());
    System.out.println("Filename = " + myHomePage.filename());
    System.out.println("Path = " + myHomePage.path());
  }
}

first, give the div an id. Then, call function appendClass:

<script language="javascript">
  function appendClass(elementId, classToAppend){
    var oldClass = document.getElementById(elementId).getAttribute("class");
    if (oldClass.indexOf(classToAdd) == -1)
    {
      document.getElementById(elementId).setAttribute("class", classToAppend);
    }
}
</script>

Here's another option. It works by putting an ActiveX ComboBox on top of the cell with validation enabled, and then providing autocomplete in the ComboBox instead.

Option Explicit

' Autocomplete - replacing validation lists with ActiveX ComboBox
'
' Usage:
'   1. Copy this code into a module named m_autocomplete
'   2. Go to Tools / References and make sure "Microsoft Forms 2.0 Object Library" is checked
'   3. Copy and paste the following code to the worksheet where you want autocomplete
'      ------------------------------------------------------------------------------------------------------
'      - autocomplete
'      Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'          m_autocomplete.SelectionChangeHandler Target
'      End Sub
'      Private Sub AutoComplete_Combo_KeyDown(ByVal KeyCode As msforms.ReturnInteger, ByVal Shift As Integer)
'          m_autocomplete.KeyDownHandler KeyCode, Shift
'      End Sub
'      Private Sub AutoComplete_Combo_Click()
'          m_autocomplete.AutoComplete_Combo_Click
'      End Sub
'      ------------------------------------------------------------------------------------------------------

' When the combobox is clicked, it should dropdown (expand)
Public Sub AutoComplete_Combo_Click()
    Dim ws As Worksheet: Set ws = ActiveSheet
    Dim cbo As OLEObject: Set cbo = GetComboBoxObject(ws)
    Dim cb As ComboBox: Set cb = cbo.Object
    If cbo.Visible Then cb.DropDown
End Sub

' Make it easier to navigate between cells
Public Sub KeyDownHandler(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
    Const UP As Integer = -1
    Const DOWN As Integer = 1

    Const K_TAB_______ As Integer = 9
    Const K_ENTER_____ As Integer = 13
    Const K_ARROW_UP__ As Integer = 38
    Const K_ARROW_DOWN As Integer = 40

    Dim direction As Integer: direction = 0

    If Shift = 0 And KeyCode = K_TAB_______ Then direction = DOWN
    If Shift = 0 And KeyCode = K_ENTER_____ Then direction = DOWN
    If Shift = 1 And KeyCode = K_TAB_______ Then direction = UP
    If Shift = 1 And KeyCode = K_ENTER_____ Then direction = UP
    If Shift = 1 And KeyCode = K_ARROW_UP__ Then direction = UP
    If Shift = 1 And KeyCode = K_ARROW_DOWN Then direction = DOWN

    If direction <> 0 Then ActiveCell.Offset(direction, 0).Activate

    AutoComplete_Combo_Click
End Sub

Public Sub SelectionChangeHandler(ByVal Target As Range)
    On Error GoTo errHandler

    Dim ws As Worksheet: Set ws = ActiveSheet
    Dim cbo As OLEObject: Set cbo = GetComboBoxObject(ws)
    Dim cb As ComboBox: Set cb = cbo.Object

    ' Try to hide the ComboBox. This might be buggy...
    If cbo.Visible Then
        cbo.Left = 10
        cbo.Top = 10
        cbo.ListFillRange = ""
        cbo.LinkedCell = ""
        cbo.Visible = False
        Application.ScreenUpdating = True
        ActiveSheet.Calculate
        ActiveWindow.SmallScroll
        Application.WindowState = Application.WindowState
        DoEvents
    End If

    If Not HasValidationList(Target) Then GoTo ex

    Application.EnableEvents = False

    ' TODO: the code below is a little fragile
    Dim lfr As String
    lfr = Mid(Target.Validation.Formula1, 2)
    lfr = Replace(lfr, "INDIREKTE", "") ' norwegian
    lfr = Replace(lfr, "INDIRECT", "") ' english
    lfr = Replace(lfr, """", "")
    lfr = Application.Range(lfr).Address(External:=True)

    cbo.ListFillRange = lfr
    cbo.Visible = True
    cbo.Left = Target.Left
    cbo.Top = Target.Top
    cbo.Height = Target.Height + 5
    cbo.Width = Target.Width + 15
    cbo.LinkedCell = Target.Address(External:=True)
    cbo.Activate
    cb.SelStart = 0
    cb.SelLength = cb.TextLength
    cb.DropDown

    GoTo ex

errHandler:
    Debug.Print "Error"
    Debug.Print Err.Number
    Debug.Print Err.Description
ex:
    Application.EnableEvents = True
End Sub

' Does the cell have a validation list?
Function HasValidationList(Cell As Range) As Boolean
    HasValidationList = False
    On Error GoTo ex
    If Cell.Validation.Type = xlValidateList Then HasValidationList = True
ex:
End Function

' Retrieve or create the ComboBox
Function GetComboBoxObject(ws As Worksheet) As OLEObject
    Dim cbo As OLEObject
    On Error Resume Next
    Set cbo = ws.OLEObjects("AutoComplete_Combo")
    On Error GoTo 0
    If cbo Is Nothing Then
        'Dim EnableSelection As Integer: EnableSelection = ws.EnableSelection
        Dim ProtectContents As Boolean: ProtectContents = ws.ProtectContents

        Debug.Print "Lager AutoComplete_Combo"
        If ProtectContents Then ws.Unprotect
        Set cbo = ws.OLEObjects.Add(ClassType:="Forms.ComboBox.1", Link:=False, DisplayAsIcon:=False, _
                            Left:=50, Top:=18.75, Width:=129, Height:=18.75)
        cbo.name = "AutoComplete_Combo"
        cbo.Object.MatchRequired = True
        cbo.Object.ListRows = 12
        If ProtectContents Then ws.Protect
    End If
    Set GetComboBoxObject = cbo
End Function

I don't believe the expression is sensical as it is.

Elvis means "if truthy, use the value, else use this other thing."

Your "other thing" is a closure, and the value is status != null, neither of which would seem to be what you want. If status is null, Elvis says true. If it's not, you get an extra layer of closure.

Why can't you just use:

(it.description == desc) && ((status == null) || (it.status == status))

Even if that didn't work, all you need is the closure to return the appropriate value, right? There's no need to create two separate find calls, just use an intermediate variable.

When calling the function, follow it by return false example:

<input  type="submit" value="Add" onclick="addNewPayment();return false;">

I tried most things here, none worked on my Ubuntu VM.

Here is a quick hack (credits goes here):

#include <iostream>
int main() {
  system("(speaker-test -t sine -f 1000)& pid=$!; sleep 1.0s; kill -9 $pid");
}

It will basically use system's speaker-test to produce the sound. This will not terminate quickly though, so the command runs it in background (the & part), then captures its process id (the pid=$1 part), sleeps for a certain amount that you can change (the sleep 1.0s part) and then it kills that process (the kill -9 $pid part).

sine is the sound produced. You can change it to pink or to a wav file.

I was testing my application with special characters & was observing the same error. After some research, turns out the % symbol was the cause. I had to modify it to the encoded representation %25. Its all fine now, thanks to the below post

https://superuser.com/questions/759959/why-does-the-percent-sign-in-a-url-cause-an-http-400-bad-request-error

I just used a model variable to show/hide the dialog and removed the data-dismiss="alert"

Example:

<div data-ng-show="vm.result == 'error'" class="alert alert-danger alert-dismissable">
    <button type="button" class="close" data-ng-click="vm.result = null" aria-hidden="true">&times;</button>
    <strong>Error  !  </strong>{{vm.exception}}
</div>

works for me and stops the need to go out to jquery

I encountered the same problem and I was able to resolve it with two solutions: First, I used the MMC snap-in "Certificates" for the "Computer account" and dragged the self-signed certificate into the "Trusted Root Certification Authorities" folder. This means the local computer (the one that generated the certificate) will now trust that certificate. Secondly I noticed that the certificate was generated for some internal computer name, but the web service was being accessed using another name. This caused a mismatch when validating the certificate. We generated the certificate for computer.operations.local, but accessed the web service using https://computer.internaldomain.companydomain.com. When we switched the URL to the one used to generate the certificate we got no more errors.

Maybe just switching URLs would have worked, but by making the certificate trusted you also avoid the red screen in Internet Explorer where it tells you it doesn't trust the certificate.

I've found the answer:

You MUST encode your json like this: {"c":21001,"m":"p"} but not {c:21001,m:"p"} or {'c':21001,'m':'p'}

Thus, the key of a dict must be wrapped in double quotes:", then chrome will preview it as json rather than plain text.

Sometimes VS2010 switches my configuration from Any CPU to Mixed Platforms. When this happens I get this error message.

To resolve it I switch back to Any CPU:
1. Right click on the solution and select properties.
2. Click on Configuration Properties and then the Configuration Manager... button.
3. Under Active solution platform select Any CPU

I found some way to perform in on dictionary contain my custom class methods

foreach (var item in this.Values.Where(p => p.IsActive == false))
            item.Refresh();

Where 'this' derived from : Dictionary<string, MyCustomClass>

class MyCustomClass 
{
   public void Refresh(){}
}

One of the JPA ways for getting only particular columns is to ask for a Tuple object.

In your case you would need to write something like this:

CriteriaQuery<Tuple> cq = builder.createTupleQuery();
// write the Root, Path elements as usual
Root<EntityClazz> root = cq.from(EntityClazz.class);
cq.multiselect(root.get(EntityClazz_.ID), root.get(EntityClazz_.VERSION));  //using metamodel
List<Tuple> tupleResult = em.createQuery(cq).getResultList();
for (Tuple t : tupleResult) {
    Long id = (Long) t.get(0);
    Long version = (Long) t.get(1);
}

Another approach is possible if you have a class representing the result, like T in your case. T doesn't need to be an Entity class. If T has a constructor like:

public T(Long id, Long version)

then you can use T directly in your CriteriaQuery constructor:

CriteriaQuery<T> cq = builder.createQuery(T.class);
// write the Root, Path elements as usual
Root<EntityClazz> root = cq.from(EntityClazz.class);
cq.multiselect(root.get(EntityClazz_.ID), root.get(EntityClazz_.VERSION));  //using metamodel
List<T> result = em.createQuery(cq).getResultList();

See this link for further reference.

The only way I know to deal with this is to create a new workspace, import projects from the polluted workspace, reconstructing all my settings (a major pain) and then delete the old workspace. Is there an easier way to deal with this?

For synchronizing or restoring all our settings we use Workspace Mechanic. Once all the settings are recorded its one click and all settings are restored... You can also setup a server which provides those settings for all users.

I recently had the same problem and used the solution provided by Harry Joy. That solution only works with with zero-based enumaration though. I also wouldn't consider it save as it doesn't deal with indexes that are out of range.

The solution I ended up using might not be as simple but it's completely save and won't hurt the performance of your code even with big enums:

public enum Example {

    UNKNOWN(0, "unknown"), ENUM1(1, "enum1"), ENUM2(2, "enum2"), ENUM3(3, "enum3");

    private static HashMap<Integer, Example> enumById = new HashMap<>();
    static {
        Arrays.stream(values()).forEach(e -> enumById.put(e.getId(), e));
    }

    public static Example getById(int id) {
        return enumById.getOrDefault(id, UNKNOWN);
    }

    private int id;
    private String description;

    private Example(int id, String description) {
        this.id = id;
        this.description= description;
    }

    public String getDescription() {
        return description;
    }

    public int getId() {
        return id;
    }
}

If you are sure that you will never be out of range with your index and you don't want to use UNKNOWN like I did above you can of course also do:

public static Example getById(int id) {
        return enumById.get(id);
}

For anyone encountering a similar situation I was able to solve the issue above as follows:

1. Regenerate your pkcs12 file as follows:

   openssl pkcs12 -in oldpkcs.p12 -out keys -passout pass:tmp
   openssl pkcs12 -in keys -export -out new.p12 -passin pass:tmp -passout pass:newpasswd
   

2. Import the CA certificate from server into a TrustStore ( either your own, or the java keystore in $JAVA_HOME/jre/lib/security/cacerts, password: changeit).

3. Set the following system properties:

   System.setProperty("javax.net.ssl.trustStore", "myTrustStore");
   System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
   System.setProperty("javax.net.ssl.keyStoreType", "pkcs12");
   System.setProperty("javax.net.ssl.keyStore", "new.p12");
   System.setProperty("javax.net.ssl.keyStorePassword", "newpasswd");
   

4. Test ur url.

Courtesy@ http://forums.sun.com/thread.jspa?threadID=5296333

All proposed solutions didn't work for me but the closest one was from @Rishii.

I'm using AngularJS 1.4.4 and UI Bootstrap 0.13.3.

.directive('jsr310Compatible', ['dateFilter', 'dateParser', function(dateFilter, dateParser) {
  return {
    restrict: 'EAC',
    require: 'ngModel',
    priority: 1,
    link: function(scope, element, attrs, ngModel) {
      var dateFormat = 'yyyy-MM-dd';

      ngModel.$parsers.push(function(viewValue) {
        return dateFilter(viewValue, dateFormat);
      });

      ngModel.$validators.date = function (modelValue, viewValue) {
        var value = modelValue || viewValue;

        if (!attrs.ngRequired && !value) {
          return true;
        }

        if (angular.isNumber(value)) {
          value = new Date(value);
        }

        if (!value) {
          return true;
        }
        else if (angular.isDate(value) && !isNaN(value)) {
          return true;
        }
        else if (angular.isString(value)) {
          var date = dateParser.parse(value, dateFormat);
          return !isNaN(date);
        }
        else {
          return false;
        }
      };
    }
  };
}])

Swift 4.0 iOS 11.2.6 list parsed and code to parse it, based on https://stackoverflow.com/users/3647770/ashok-r answer above.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
  <dict>
    <key>identity</key>
    <string>blah-1</string>
    <key>major</key>
    <string>1</string>
    <key>minor</key>
    <string>1</string>
    <key>uuid</key>
    <string>f45321</string>
    <key>web</key>
    <string>http://web</string>
</dict>
<dict>
    <key>identity</key>
    <string></string>
    <key>major</key>
    <string></string>
    <key>minor</key>
    <string></string>
    <key>uuid</key>
    <string></string>
    <key>web</key>
    <string></string>
  </dict>
</array>
</plist>

do {
   let plistXML = try Data(contentsOf: url)
    var plistData: [[String: AnyObject]] = [[:]]
    var propertyListFormat =  PropertyListSerialization.PropertyListFormat.xml
        do {
            plistData = try PropertyListSerialization.propertyList(from: plistXML, options: .mutableContainersAndLeaves, format: &propertyListFormat) as! [[String:AnyObject]]

        } catch {
            print("Error reading plist: \(error), format: \(propertyListFormat)")
        }
    } catch {
        print("error no upload")
    }

UPDATE your_table
SET your_field = REPLACE(your_field, 'articles/updates/', 'articles/news/')
WHERE your_field LIKE '%articles/updates/%'

Now rows that were like

http://www.example.com/articles/updates/43

will be

http://www.example.com/articles/news/43

http://www.electrictoolbox.com/mysql-find-replace-text/

To quote the documentation:

Key words and unquoted identifiers are case insensitive. Therefore:

UPDATE MY_TABLE SET A = 5;

can equivalently be written as:

uPDaTE my_TabLE SeT a = 5;

You could also write it using quoted identifiers:

UPDATE "my_table" SET "a" = 5;

Quoting an identifier makes it case-sensitive, whereas unquoted names are always folded to lower case (unlike the SQL standard where unquoted names are folded to upper case). For example, the identifiers FOO, foo, and "foo" are considered the same by PostgreSQL, but "Foo" and "FOO" are different from these three and each other.

If you want to write portable applications you are advised to always quote a particular name or never quote it.

in the V2.0 it's not possible. The iframe blocks all styling out of this. It's difficult to add a custom theme instead of the dark or light one.

Origin null is the local file system, so that suggests that you're loading the HTML page that does the load call via a file:/// URL (e.g., just double-clicking it in a local file browser or similar). Different browsers take different approaches to applying the Same Origin Policy to local files.

My guess is that you're seeing this using Chrome. Chrome's rules for applying the SOP to local files are very tight, it disallows even loading files from the same directory as the document. So does Opera. Some other browsers, such as Firefox, allow limited access to local files. But basically, using ajax with local resources isn't going to work cross-browser.

If you're just testing something locally that you'll really be deploying to the web, rather than use local files, install a simple web server and test via http:// URLs instead. That gives you a much more accurate security picture.

https://docs.mongodb.com/manual/reference/configuration-options/#security.authorization

Edit the mongo settings file;

sudo nano /etc/mongod.conf

Add the line:

security.authorization : enabled

Restart the service

sudo service mongod restart

Regards

This is the strict aliasing rule, found in section 3.10 of the C++03 standard (other answers provide good explanation, but none provided the rule itself):

If a program attempts to access the stored value of an object through an lvalue of other than one of the following types the behavior is undefined:

• the dynamic type of the object,
• a cv-qualified version of the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to a cv-qualified version of the dynamic type of the object,
• an aggregate or union type that includes one of the aforementioned types among its members (including, recursively, a member of a subaggregate or contained union),
• a type that is a (possibly cv-qualified) base class type of the dynamic type of the object,
• a char or unsigned char type.

C++11 and C++14 wording (changes emphasized):

If a program attempts to access the stored value of an object through a glvalue of other than one of the following types the behavior is undefined:

• the dynamic type of the object,
• a cv-qualified version of the dynamic type of the object,
• a type similar (as defined in 4.4) to the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to a cv-qualified version of the dynamic type of the object,
• an aggregate or union type that includes one of the aforementioned types among its elements or non-static data members (including, recursively, an element or non-static data member of a subaggregate or contained union),
• a type that is a (possibly cv-qualified) base class type of the dynamic type of the object,
• a char or unsigned char type.

Two changes were small: glvalue instead of lvalue, and clarification of the aggregate/union case.

The third change makes a stronger guarantee (relaxes the strong aliasing rule): The new concept of similar types that are now safe to alias.

Also the C wording (C99; ISO/IEC 9899:1999 6.5/7; the exact same wording is used in ISO/IEC 9899:2011 §6.5 ¶7):

An object shall have its stored value accessed only by an lvalue expression that has one of the following types ^{73) or 88)}:

• a type compatible with the effective type of the object,
• a quali?ed version of a type compatible with the effective type of the object,
• a type that is the signed or unsigned type corresponding to the effective type of the object,
• a type that is the signed or unsigned type corresponding to a quali?ed version of the effective type of the object,
• an aggregate or union type that includes one of the aforementioned types among its members (including, recursively, a member of a subaggregate or contained union), or
• a character type.

^{73) or 88)} The intent of this list is to specify those circumstances in which an object may or may not be aliased.

However iOS Simulator->HardWare->Device menu.

This is commonly referred to as screen scraping, by the way. The library I have used for this is Simple HTML Dom Parser.

A const object is always static.

Here is the swift 3 updated answer

var editedText = myLabel.text?.replacingOccurrences(of: "\"", with: "")

Null Character (\0)
Backslash (\\)
Horizontal Tab (\t)
Line Feed (\n)
Carriage Return (\r)
Double Quote (\")
Single Quote (\')
Unicode scalar (\u{n})

Squash commits locally with

git rebase -i origin/master~4 master

and then force push with

git push origin +master

Difference between --force and +

From the documentation of git push:

Note that --force applies to all the refs that are pushed, hence using it with push.default set to matching or with multiple push destinations configured with remote.*.push may overwrite refs other than the current branch (including local refs that are strictly behind their remote counterpart). To force a push to only one branch, use a + in front of the refspec to push (e.g git push origin +master to force a push to the master branch).

Use a good XSD Schema to create a set of classes with xsd.exe and use an XmlSerializer to create a object tree out of your XML and vice versa. If you have few restrictions on your model, you could even try to create a direct mapping between you model classes and the XML with the Xml*Attributes.

There is an introductory article about XML Serialisation on MSDN.

Performance tip: Constructing an XmlSerializer is expensive. Keep a reference to your XmlSerializer instance if you intend to parse/write multiple XML files.

I thought it would be useful to compare the timings of the different solutions presented here. For this I used my own library simple_benchmark:

So indeed for this case the solution from Denis Otkidach is fastest.

Some of the approaches also exhibit a much steeper curve, these are the approaches that scale quadratic with the number of elements (Alex Martellis first solution, wjandrea and both of Xavier Decorets solutions). Also important to mention is that the pandas solution from Keiku has a very big constant factor. But for larger lists it almost catches up with the other solutions.

And in case the duplicate is at the first position. This is useful to see which solutions are short-circuiting:

Here several approaches don't short-circuit: Kaiku, Frank, Xavier_Decoret (first solution), Turn, Alex Martelli (first solution) and the approach presented by Denis Otkidach (which was fastest in the no-duplicate case).

I included a function from my own library here: iteration_utilities.all_distinct which can compete with the fastest solution in the no-duplicates case and performs in constant-time for the duplicate-at-begin case (although not as fastest).

The code for the benchmark:

from collections import Counter
from functools import reduce

import pandas as pd
from simple_benchmark import BenchmarkBuilder
from iteration_utilities import all_distinct

b = BenchmarkBuilder()

@b.add_function()
def Keiku(l):
    return pd.Series(l).duplicated().sum() > 0

@b.add_function()
def Frank(num_list):
    unique = []
    dupes = []
    for i in num_list:
        if i not in unique:
            unique.append(i)
        else:
            dupes.append(i)
    if len(dupes) != 0:
        return False
    else:
        return True

@b.add_function()
def wjandrea(iterable):
    seen = []
    for x in iterable:
        if x in seen:
            return True
        seen.append(x)
    return False

@b.add_function()
def user(iterable):
    clean_elements_set = set()
    clean_elements_set_add = clean_elements_set.add

    for possible_duplicate_element in iterable:

        if possible_duplicate_element in clean_elements_set:
            return True

        else:
            clean_elements_set_add( possible_duplicate_element )

    return False

@b.add_function()
def Turn(l):
    return Counter(l).most_common()[0][1] > 1

def getDupes(l):
    seen = set()
    seen_add = seen.add
    for x in l:
        if x in seen or seen_add(x):
            yield x

@b.add_function()          
def F1Rumors(l):
    try:
        if next(getDupes(l)): return True    # Found a dupe
    except StopIteration:
        pass
    return False

def decompose(a_list):
    return reduce(
        lambda u, o : (u[0].union([o]), u[1].union(u[0].intersection([o]))),
        a_list,
        (set(), set()))

@b.add_function()
def Xavier_Decoret_1(l):
    return not decompose(l)[1]

@b.add_function()
def Xavier_Decoret_2(l):
    try:
        def func(s, o):
            if o in s:
                raise Exception
            return s.union([o])
        reduce(func, l, set())
        return True
    except:
        return False

@b.add_function()
def pyrospade(xs):
    s = set()
    return any(x in s or s.add(x) for x in xs)

@b.add_function()
def Alex_Martelli_1(thelist):
    return any(thelist.count(x) > 1 for x in thelist)

@b.add_function()
def Alex_Martelli_2(thelist):
    seen = set()
    for x in thelist:
        if x in seen: return True
        seen.add(x)
    return False

@b.add_function()
def Denis_Otkidach(your_list):
    return len(your_list) != len(set(your_list))

@b.add_function()
def MSeifert04(l):
    return not all_distinct(l)

And for the arguments:

# No duplicate run
@b.add_arguments('list size')
def arguments():
    for exp in range(2, 14):
        size = 2**exp
        yield size, list(range(size))

# Duplicate at beginning run
@b.add_arguments('list size')
def arguments():
    for exp in range(2, 14):
        size = 2**exp
        yield size, [0, *list(range(size)]

# Running and plotting
r = b.run()
r.plot()

Search the file my.cnf and comment the line

skip-networking

to

#skip-networking

Restart mysql

There is a hackish solution using OpenFileDialog where ValidateNames and CheckFileExists are both set to false and FileName is given a mock value to indicate that a directory is selected.

I say hack because it is confusing to users about how to select a folder. They need to be in the desired folder and then just press Open while file name says "Folder Selection."

This is based on Select file or folder from the same dialog by Denis Stankovski.

OpenFileDialog folderBrowser = new OpenFileDialog();
// Set validate names and check file exists to false otherwise windows will
// not let you select "Folder Selection."
folderBrowser.ValidateNames = false;
folderBrowser.CheckFileExists = false;
folderBrowser.CheckPathExists = true;
// Always default to Folder Selection.
folderBrowser.FileName = "Folder Selection.";
if (folderBrowser.ShowDialog() == DialogResult.OK)
{
    string folderPath = Path.GetDirectoryName(folderBrowser.FileName);
    // ...
}

In command line it's better to use REG tool rather than REGEDIT:

REG IMPORT yourfile.reg

REG is designed for console mode, while REGEDIT is for graphical mode. This is why running regedit.exe /S yourfile.reg is a bad idea, since you will not be notified if the there's an error, whereas REG Tool will prompt:

>  REG IMPORT missing_file.reg

ERROR: Error opening the file. There may be a disk or file system error.

>  %windir%\System32\reg.exe /?

REG Operation [Parameter List]

  Operation  [ QUERY   | ADD    | DELETE  | COPY    |
               SAVE    | LOAD   | UNLOAD  | RESTORE |
               COMPARE | EXPORT | IMPORT  | FLAGS ]

Return Code: (Except for REG COMPARE)

  0 - Successful
  1 - Failed

For help on a specific operation type:

  REG Operation /?

Examples:

  REG QUERY /?
  REG ADD /?
  REG DELETE /?
  REG COPY /?
  REG SAVE /?
  REG RESTORE /?
  REG LOAD /?
  REG UNLOAD /?
  REG COMPARE /?
  REG EXPORT /?
  REG IMPORT /?
  REG FLAGS /?

nm -g list the extern variable, which is not necessary exported symbol. Any non-static file scope variable(in C) are all extern variable.

nm -D will list the symbol in the dynamic table, which you can find it's address by dlsym.

nm --version

GNU nm 2.17.50.0.6-12.el5 20061020

You can select a child like

TextView tv = (TextView)lv.getChildAt(0);
tv.setTextColor(Color.RED);
tv.setTextSize(12);    

Kindly try below on postman :-

In header section example work for me..

Authorization : JWT eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.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.BkyB0LjKB4FIsCtnM5FcpcBLvKed_j7rCCxZddwiYnU

To run the batch file when the VM user logs in:

Drag the shortcut--the one that's currently on your desktop--(or the batch file itself) to Start - All Programs - Startup. Now when you login as that user, it will launch the batch file.

Another way to do the same thing is to save the shortcut or the batch file in %AppData%\Microsoft\Windows\Start Menu\Programs\Startup\.

As far as getting it to run full screen, it depends a bit what you mean. You can have it launch maximized by editing your batch file like this:

start "" /max "C:\Program Files\Oracle\VirtualBox\VirtualBox.exe" --comment "VM" --startvm "12dada4d-9cfd-4aa7-8353-20b4e455b3fa"

But if VirtualBox has a truly full-screen mode (where it hides even the taskbar), you'll have to look for a command-line parameter on VirtualBox.exe. I'm not familiar with that product.

I fixed this problem by running this in terminal. Full writeup is available over here

rvm install 2.2.0 --disable-binary

I'll rename the function take_closest to conform with PEP8 naming conventions.

If you mean quick-to-execute as opposed to quick-to-write, min should not be your weapon of choice, except in one very narrow use case. The min solution needs to examine every number in the list and do a calculation for each number. Using bisect.bisect_left instead is almost always faster.

The "almost" comes from the fact that bisect_left requires the list to be sorted to work. Hopefully, your use case is such that you can sort the list once and then leave it alone. Even if not, as long as you don't need to sort before every time you call take_closest, the bisect module will likely come out on top. If you're in doubt, try both and look at the real-world difference.

from bisect import bisect_left

def take_closest(myList, myNumber):
    """
    Assumes myList is sorted. Returns closest value to myNumber.

    If two numbers are equally close, return the smallest number.
    """
    pos = bisect_left(myList, myNumber)
    if pos == 0:
        return myList[0]
    if pos == len(myList):
        return myList[-1]
    before = myList[pos - 1]
    after = myList[pos]
    if after - myNumber < myNumber - before:
       return after
    else:
       return before

Bisect works by repeatedly halving a list and finding out which half myNumber has to be in by looking at the middle value. This means it has a running time of O(log n) as opposed to the O(n) running time of the highest voted answer. If we compare the two methods and supply both with a sorted myList, these are the results:

$ python -m timeit -s "
from closest import take_closest
from random import randint
a = range(-1000, 1000, 10)" "take_closest(a, randint(-1100, 1100))"

100000 loops, best of 3: 2.22 usec per loop

$ python -m timeit -s "
from closest import with_min
from random import randint
a = range(-1000, 1000, 10)" "with_min(a, randint(-1100, 1100))"

10000 loops, best of 3: 43.9 usec per loop

So in this particular test, bisect is almost 20 times faster. For longer lists, the difference will be greater.

What if we level the playing field by removing the precondition that myList must be sorted? Let's say we sort a copy of the list every time take_closest is called, while leaving the min solution unaltered. Using the 200-item list in the above test, the bisect solution is still the fastest, though only by about 30%.

This is a strange result, considering that the sorting step is O(n log(n))! The only reason min is still losing is that the sorting is done in highly optimalized c code, while min has to plod along calling a lambda function for every item. As myList grows in size, the min solution will eventually be faster. Note that we had to stack everything in its favour for the min solution to win.

if you want to access a method :

1) while using an object of a class:

Myclass myclass;
myclass.DoSomething();

2) while using a pointer to an object of a class:

Myclass *myclass=&abc;
myclass->DoSomething();

You can do as follow :

import json
exDict = {1:1, 2:2, 3:3}
file.write(json.dumps(exDict))

https://developer.rhino3d.com/guides/rhinopython/python-xml-json/

It does work in Firefox (including 2.0.0.20). See http://jsbin.com/akili (add /edit to the url to edit):

<p id="one">One</p>
<a href="#" onclick="document.getElementById('one').id = 'two'; return false">Link2</a>

The first click changes the id to "two", the second click errors because the element with id="one" now can't be found!

Perhaps you have another element already with id="two" (FYI you can't have more than one element with the same id).

I have put this in my partial view:

@HttpContext.Current.Request.RequestContext.RouteData.Values["controller"].ToString()

in the same kind of situation you describe, and it shows the controller described in the URL (Category for you, Product for me), instead of the actual location of the partial view.

So use this alert instead:

alert('@HttpContext.Current.Request.RequestContext.RouteData.Values["controller"].ToString()');

NodeJS now includes threads (as an experimental feature at time of answering).

I know this is a very old question but it still doesn't have an accepted answer. I see that you want the following removed: html tags that are "empty" and white spaces based on an html string.

I have come up with a solution based on your comment for the output you are looking for:

Trimming using JavaScript<br /><br /><br /><br />all leading and trailing white spaces 

var str = "<p>&nbsp;&nbsp;</p><div>&nbsp;</div>Trimming using JavaScript<br /><br /><br /><br />all leading and trailing white spaces<p>&nbsp;&nbsp;</p><div>&nbsp;</div>";_x000D_
console.log(str.trim().replace(/&nbsp;/g, '').replace(/<[^\/>][^>]*><\/[^>]+>/g, ""));

.trim() removes leading and trailing whitespace

.replace(/ /g, '') removes  

.replace(/<[^\/>][^>]*><\/[^>]+>/g, "")); removes empty tags

raw_input can correctly handle the EOF, so we can write a loop, read till we have received an EOF (Ctrl-D) from user:

Python 3

print("Enter/Paste your content. Ctrl-D or Ctrl-Z ( windows ) to save it.")
contents = []
while True:
    try:
        line = input()
    except EOFError:
        break
    contents.append(line)

Python 2

print "Enter/Paste your content. Ctrl-D or Ctrl-Z ( windows ) to save it."
contents = []
while True:
    try:
        line = raw_input("")
    except EOFError:
        break
    contents.append(line)

IMPORTANT - on ubuntu package docker is something entirely different ( avoid it ) :

issue following to view what if any packages you have mentioning docker

dpkg -l|grep docker

if only match is following then you do NOT have docker installed below is an unrelated package

docker - System tray for KDE3/GNOME2 docklet applications

if you see something similar to following then you have docker installed

 dpkg -l|grep docker

ii  docker-ce                                  5:19.03.13~3-0~ubuntu-focal         amd64        Docker: the open-source application container engine
ii  docker-ce-cli                              5:19.03.13~3-0~ubuntu-focal         amd64        Docker CLI: the open-source application container engine

NOTE - ubuntu package docker.io is not getting updates ( obsolete do NOT use )

Instead do this : install the latest version of docker on linux by executing the following:

  sudo curl -sSL https://get.docker.com/ | sh
# sudo curl -sSL https://test.docker.com | sh  # get dev pipeline version
  

here is a typical output ( ubuntu 16.04 )

apparmor is enabled in the kernel and apparmor utils were already installed
+ sudo -E sh -c apt-key adv --keyserver hkp://ha.pool.sks-keyservers.net:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D
Executing: /tmp/tmp.rAAGu0P85R/gpg.1.sh --keyserver
hkp://ha.pool.sks-keyservers.net:80
--recv-keys
58118E89F3A912897C070ADBF76221572C52609D
gpg: requesting key 2C52609D from hkp server ha.pool.sks-keyservers.net
gpg: key 2C52609D: "Docker Release Tool (releasedocker) <[email protected]>" 1 new signature
gpg: Total number processed: 1
gpg:         new signatures: 1
+ break
+ sudo -E sh -c apt-key adv -k 58118E89F3A912897C070ADBF76221572C52609D >/dev/null
+ sudo -E sh -c mkdir -p /etc/apt/sources.list.d
+ dpkg --print-architecture
+ sudo -E sh -c echo deb [arch=amd64] https://apt.dockerproject.org/repo ubuntu-xenial main > /etc/apt/sources.list.d/docker.list
+ sudo -E sh -c sleep 3; apt-get update; apt-get install -y -q docker-engine
Hit:1 http://repo.steampowered.com/steam precise InRelease
Hit:2 http://download.virtualbox.org/virtualbox/debian xenial InRelease                                                           
Ign:3 http://dl.google.com/linux/chrome/deb stable InRelease                                                                      
Hit:4 http://dl.google.com/linux/chrome/deb stable Release                                                                        
Hit:5 http://archive.canonical.com/ubuntu xenial InRelease                                                                        
Hit:6 http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive xenial InRelease                                                     
Hit:7 http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive xenial-updates InRelease                                             
Hit:8 http://ppa.launchpad.net/me-davidsansome/clementine/ubuntu xenial InRelease                                                 
Ign:9 http://repo.mongodb.org/apt/debian wheezy/mongodb-org/3.2 InRelease                                                         
Hit:10 http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive xenial-backports InRelease                                          
Hit:11 http://repo.mongodb.org/apt/debian wheezy/mongodb-org/3.2 Release                                                          
Hit:12 http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive xenial-security InRelease                                           
Hit:14 http://ppa.launchpad.net/numix/ppa/ubuntu xenial InRelease                                                                 
Ign:15 http://linux.dropbox.com/ubuntu wily InRelease                                                                             
Ign:16 http://repo.vivaldi.com/stable/deb stable InRelease                                                                        
Hit:17 http://repo.vivaldi.com/stable/deb stable Release                                                                          
Get:18 http://linux.dropbox.com/ubuntu wily Release [6,596 B]            
Get:19 https://apt.dockerproject.org/repo ubuntu-xenial InRelease [20.6 kB]    
Ign:20 http://packages.amplify.nginx.com/ubuntu xenial InRelease                      
Hit:22 http://packages.amplify.nginx.com/ubuntu xenial Release
Hit:23 https://deb.opera.com/opera-beta stable InRelease
Hit:26 https://deb.opera.com/opera-developer stable InRelease
Get:28 https://apt.dockerproject.org/repo ubuntu-xenial/main amd64 Packages [1,719 B]
Hit:29 https://packagecloud.io/slacktechnologies/slack/debian jessie InRelease
Fetched 28.9 kB in 1s (17.2 kB/s)
Reading package lists... Done
W: http://repo.mongodb.org/apt/debian/dists/wheezy/mongodb-org/3.2/Release.gpg: Signature by key 42F3E95A2C4F08279C4960ADD68FA50FEA312927 uses weak digest algorithm (SHA1)
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  aufs-tools cgroupfs-mount
The following NEW packages will be installed:
  aufs-tools cgroupfs-mount docker-engine
0 upgraded, 3 newly installed, 0 to remove and 17 not upgraded.
Need to get 14.6 MB of archives.
After this operation, 73.7 MB of additional disk space will be used.
Get:1 http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive xenial/universe amd64 aufs-tools amd64 1:3.2+20130722-1.1ubuntu1 [92.9 kB]
Get:2 http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive xenial/universe amd64 cgroupfs-mount all 1.2 [4,970 B]
Get:3 https://apt.dockerproject.org/repo ubuntu-xenial/main amd64 docker-engine amd64 1.11.2-0~xenial [14.5 MB]
Fetched 14.6 MB in 7s (2,047 kB/s)
Selecting previously unselected package aufs-tools.
(Reading database ... 427978 files and directories currently installed.)
Preparing to unpack .../aufs-tools_1%3a3.2+20130722-1.1ubuntu1_amd64.deb ...
Unpacking aufs-tools (1:3.2+20130722-1.1ubuntu1) ...
Selecting previously unselected package cgroupfs-mount.
Preparing to unpack .../cgroupfs-mount_1.2_all.deb ...
Unpacking cgroupfs-mount (1.2) ...
Selecting previously unselected package docker-engine.
Preparing to unpack .../docker-engine_1.11.2-0~xenial_amd64.deb ...
Unpacking docker-engine (1.11.2-0~xenial) ...
Processing triggers for libc-bin (2.23-0ubuntu3) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for ureadahead (0.100.0-19) ...
Processing triggers for systemd (229-4ubuntu6) ...
Setting up aufs-tools (1:3.2+20130722-1.1ubuntu1) ...
Setting up cgroupfs-mount (1.2) ...
Setting up docker-engine (1.11.2-0~xenial) ...
Processing triggers for libc-bin (2.23-0ubuntu3) ...
Processing triggers for systemd (229-4ubuntu6) ...
Processing triggers for ureadahead (0.100.0-19) ...
+ sudo -E sh -c docker version
Client:
 Version:      1.11.2
 API version:  1.23
 Go version:   go1.5.4
 Git commit:   b9f10c9
 Built:        Wed Jun  1 22:00:43 2016
 OS/Arch:      linux/amd64

Server:
 Version:      1.11.2
 API version:  1.23
 Go version:   go1.5.4
 Git commit:   b9f10c9
 Built:        Wed Jun  1 22:00:43 2016
 OS/Arch:      linux/amd64

If you would like to use Docker as a non-root user, you should now consider
adding your user to the "docker" group with something like:

  sudo usermod -aG docker stens

Remember that you will have to log out and back in for this to take effect!

Here is the underlying detailed install instructions which as you can see comes bundled into above technique ... Above one liner gives you same as :

https://docs.docker.com/engine/installation/linux/ubuntulinux/

Once installed you can see what docker packages were installed by issuing

dpkg -l|grep docker
ii  docker-ce                                  5:19.03.13~3-0~ubuntu-focal         amd64        Docker: the open-source application container engine
ii  docker-ce-cli                              5:19.03.13~3-0~ubuntu-focal         amd64        Docker CLI: the open-source application container engine

now Docker updates will get installed going forward when you issue

sudo apt-get update
sudo apt-get upgrade

take a look at

 ls -latr /etc/apt/sources.list.d/*docker*
-rw-r--r-- 1 root root 202 Jun 23 10:01 /etc/apt/sources.list.d/docker.list.save
-rw-r--r-- 1 root root  71 Jul  4 11:32 /etc/apt/sources.list.d/docker.list


cat /etc/apt/sources.list.d/docker.list

deb [arch=amd64] https://apt.dockerproject.org/repo ubuntu-xenial main

or more generally

cd /etc/apt
grep -r docker *
sources.list.d/docker.list:deb [arch=amd64] https://download.docker.com/linux/ubuntu focal test

I've had to try to 'fix' a number of UTF8 broken situations in the past, and unfortunately it's never easy, and often rather impossible.

Unless you can determine exactly how it was broken, and it was always broken in that exact same way, then it's going to be hard to 'undo' the damage.

If you want to try to undo the damage, your best bet would be to start writing some sample code, where you attempt numerous variations on calls to mb_convert_encoding() to see if you can find a combination of 'from' and 'to' that fixes your data. In the end, it's often best to not even bother worrying about fixing the old data because of the pain levels involved, but instead to just fix things going forward.

However, before doing this, you need to make sure that you fix everything that is causing this issue in the first place. You've already mentioned that your DB table collation and editors are set properly. But there are more places where you need to check to make sure that everything is properly UTF-8:

• Make sure that you are serving your HTML as UTF-8:
  • header("Content-Type: text/html; charset=utf-8");
• Change your PHP default charset to utf-8:
  • ini_set("default_charset", 'utf-8');
• If your database doesn't ALWAYS talk in utf-8, then you may need to tell it on a per connection basis to ensure it's in utf-8 mode, in MySQL you do that by issuing:
  • charset utf8
• You may need to tell your webserver to always try to talk in UTF8, in Apache this command is:
  • AddDefaultCharset UTF-8
• Finally, you need to ALWAYS make sure that you are using PHP functions that are properly UTF-8 complaint. This means always using the mb_* styled 'multibyte aware' string functions. It also means when calling functions such as htmlspecialchars(), that you include the appropriate 'utf-8' charset parameter at the end to make sure that it doesn't encode them incorrectly.

If you miss up on any one step through your whole process, the encoding can be mangled and problems arise. Once you get in the 'groove' of doing utf-8 though, this all becomes second nature. And of course, PHP6 is supposed to be fully unicode complaint from the getgo, which will make lots of this easier (hopefully)

the only solution for me was:

click on window->close all perspective (you can try also close perspective)

after this, in the top right corner click on: open perspective->resource

done

for _ in {1..10}; do command; done   

Note the underscore instead of using a variable.

Found the issue by rolling back to Angular 1.5.9 and rerunning the test. It was a simple injection issue but Angular 1.6.0 superseded this by throwing the "Possibly Unhandled Rejection" error instead, obfuscating the actual error.

Using Visual Studio

1. Attach a debugger to the process (e.g. start with debugging or Debug > Attach to process)
2. While debugging, show the Modules window (Debug > Windows > Modules)

This gives details about each assembly, app domain and has a few options to load symbols (i.e. pdb files that contain debug information).

Using Process Explorer

If you want an external tool you can use the Process Explorer (freeware, published by Microsoft)

Click on a process and it will show a list with all the assemblies used. The tool is pretty good as it shows other information such as file handles etc.

Programmatically

Check this SO question that explains how to do it.

You can make the border transparent. In this way it exists, but is invisible, so it doesn't push anything around:

.jobs .item {
   background: #eee;
   border: 1px solid transparent;
}

.jobs .item:hover {
   background: #e1e1e1;
   border: 1px solid #d0d0d0;
}

<div class="jobs">
  <div class="item">Item</div>
</div>

For elements that already have a border, and you don't want them to move, you can use negative margins:

.jobs .item {
    background: #eee;
    border: 1px solid #d0d0d0;
}

.jobs .item:hover {
   background: #e1e1e1;
    border: 3px solid #d0d0d0;
    margin: -2px;
}

<div class="jobs">
  <div class="item">Item</div>
</div>

Another possible trick for adding width to an existing border is to add a box-shadow with the spread attribute of the desired pixel width.

.jobs .item {
    background: #eee;
    border: 1px solid #d0d0d0;
}

.jobs .item:hover {
    background: #e1e1e1;
    box-shadow: 0 0 0 2px #d0d0d0;
}

<div class="jobs">
  <div class="item">Item</div>
</div>

initialize the Session class in the constructor of controller using

$this->load->library('session');

for example :

 function __construct()
   {
    parent::__construct();
    $this->load->model('user','',TRUE);
    $this->load->model('user_activity','',TRUE);
    $this->load->library('session');
   }

I used this after updating a register and changed the state of request via ajax, then I do a query with the new state in the same script and put it in the select tag element new state to update the view.

var objSel = document.getElementById("selectObj");
objSel.selectedIndex = elementSelected;

I hope this is useful.

You can try jclasslib:

https://github.com/ingokegel/jclasslib

It's nice that it can associate itself with *.class extension.

In Python there's no POSIX regex classes

There are when using the regex library: https://pypi.org/project/regex/

It is well maintained and supports Unicode regex, Posix regex and many more. The usage (method signatures) is very similar to Python's re.

From the documentation:

[[:alpha:]]; [[:^alpha:]]

POSIX character classes are supported. These are normally treated as an alternative form of \p{...}.

(I'm not affiliated, just a user.)

The filter function wasn't working for me at all; maybe the more recent version of jquery doesn't perform as the version used in above code. Regardless; I used:

    var black = $('.black');
    var white = $('.white');

The selector will find every element classed under black or white. Button functions stay as stated above:

    $('#showBlackButton').click(function() {
           black.show();
           white.hide();
    });

    $('#showWhiteButton').click(function() {
           white.show();
           black.hide();
    });

Check if folder .ssh is on your system

1. Go to folder --> /Users/administrator/.ssh/id_ed25519.pub

If not, then

2. Open Terminal.

Paste in the terminal

3. Check user ? ssh -T [email protected]

Remove existing SSH keys

4. Remove existing SSH keys ? rm ~/.ssh/github_rsa.pub

Create New

5. Create new SSH key ? ssh-keygen -t rsa -b 4096 -C "[email protected]"

6. The public key has been saved in "/Users/administrator/.ssh/id_ed25519.pub."

7. Open the public key saved path.

8. Copy the SSH key ? GitLab Account ? Setting ? SSH Key ? Add key

9. Test again from the terminal ? ssh -T [email protected]

PyExecJS is able to use each of PyV8, Node, JavaScriptCore, SpiderMonkey, JScript.

>>> import execjs
>>> execjs.eval("'red yellow blue'.split(' ')")
['red', 'yellow', 'blue']
>>> execjs.get().name
'Node.js (V8)'

For me, i had to uninstall R from brew brew uninstall --force R and then head over to the R website and download and install it from there.

As of AngularJS 1.1.3, you can now do exactly what you want using the new catch-all parameter.

https://github.com/angular/angular.js/commit/7eafbb98c64c0dc079d7d3ec589f1270b7f6fea5

From the commit:

This allows routeProvider to accept parameters that matches substrings even when they contain slashes if they are prefixed with an asterisk instead of a colon. For example, routes like edit/color/:color/largecode/*largecode will match with something like this http://appdomain.com/edit/color/brown/largecode/code/with/slashs.

I have tested it out myself (using 1.1.5) and it works great. Just keep in mind that each new URL will reload your controller, so to keep any kind of state, you may need to use a custom service.

Thanks, Valter Henrique, with your tip i managed to realise, that i simply entered incorrect path to this image. In one of my tries i use

    String pathToImageSortBy = "resources/testDataIcons/filling.png";
    ImageIcon SortByIcon = new ImageIcon(getClass().getClassLoader().getResource(pathToImageSortBy));

But correct way was use name of my project in path to resource

String pathToImageSortBy = "nameOfProject/resources/testDataIcons/filling.png";
ImageIcon SortByIcon = new ImageIcon(getClass().getClassLoader().getResource(pathToImageSortBy));

Get Current DateTime

Now.ToShortDateString()
DateTime.Now
Today.Now

Try:

mmatrix = np.zeros((nrows, ncols))

Since the shape parameter has to be an int or sequence of ints

http://docs.scipy.org/doc/numpy/reference/generated/numpy.zeros.html

Otherwise you are passing ncols to np.zeros as the dtype.

Let's illustrate what's happening here:

Python 3.1.2 (r312:79147, Sep 27 2010, 09:45:41) 
[GCC 4.4.3] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> class Foo:
...     def __init__(self, x=[]):
...         x.append(1)
... 
>>> Foo.__init__.__defaults__
([],)
>>> f = Foo()
>>> Foo.__init__.__defaults__
([1],)
>>> f2 = Foo()
>>> Foo.__init__.__defaults__
([1, 1],)

You can see that the default arguments are stored in a tuple which is an attribute of the function in question. This actually has nothing to do with the class in question and goes for any function. In python 2, the attribute will be func.func_defaults.

As other posters have pointed out, you probably want to use None as a sentinel value and give each instance it's own list.

I worked quite a long time with Flux and now quite a long time using Redux. As Dan pointed out both architectures are not so different. The thing is that Redux makes the things simpler and cleaner. It teaches you a couple of things on top of Flux. Like for example Flux is a perfect example of one-direction data flow. Separation of concerns where we have data, its manipulations and view layer separated. In Redux we have the same things but we also learn about immutability and pure functions.

UIFont *systemFont = [UIFont systemFontOfSize:[UIFont systemFontSize]];

This will give you the system font with the default system font size applied for the label texts by default.

Do a git rebase -i FAR_ENOUGH_BACK and drop the line for the commit you don't want.

I think the best option in Terms of performance (or in any terms) is to Distinct using the The IEqualityComparer interface.

Although implementing each time a new comparer for each class is cumbersome and produces boilerplate code.

So here is an extension method which produces a new IEqualityComparer on the fly for any class using reflection.

Usage:

var filtered = taskList.DistinctBy(t => t.TaskExternalId).ToArray();

Extension Method Code

public static class LinqExtensions
{
    public static IEnumerable<T> DistinctBy<T, TKey>(this IEnumerable<T> items, Func<T, TKey> property)
    {
        GeneralPropertyComparer<T, TKey> comparer = new GeneralPropertyComparer<T,TKey>(property);
        return items.Distinct(comparer);
    }   
}
public class GeneralPropertyComparer<T,TKey> : IEqualityComparer<T>
{
    private Func<T, TKey> expr { get; set; }
    public GeneralPropertyComparer (Func<T, TKey> expr)
    {
        this.expr = expr;
    }
    public bool Equals(T left, T right)
    {
        var leftProp = expr.Invoke(left);
        var rightProp = expr.Invoke(right);
        if (leftProp == null && rightProp == null)
            return true;
        else if (leftProp == null ^ rightProp == null)
            return false;
        else
            return leftProp.Equals(rightProp);
    }
    public int GetHashCode(T obj)
    {
        var prop = expr.Invoke(obj);
        return (prop==null)? 0:prop.GetHashCode();
    }
}

The query below returns a list of information about each field, including the MySQL field type. Here is an example:

SHOW FIELDS FROM tablename
/* returns "Field", "Type", "Null", "Key", "Default", "Extras" */

See this manual page.

This happens when Eclipse shuts down incorrectly - delete the server and then re-create it again.

How about creating two dataframes, each with different data types for their columns, and then appending them together?

d1 = pd.DataFrame(columns=[ 'float_column' ], dtype=float)
d1 = d1.append(pd.DataFrame(columns=[ 'string_column' ], dtype=str))

Results

In[8}:  d1.dtypes
Out[8]: 
float_column     float64
string_column     object
dtype: object

After the dataframe is created, you can populate it with floating point variables in the 1st column, and strings (or any data type you desire) in the 2nd column.

It says:

When you save and exit the editor, it will rewind you back to that last commit in that list and drop you on the command line with the following message:

$ git rebase -i HEAD~3
Stopped at 7482e0d... updated the gemspec to hopefully work better
You can amend the commit now, with

It does not mean:

type again git rebase -i HEAD~3

Try to not typing git rebase -i HEAD~3 when exiting the editor, and it should work fine.
(otherwise, in your particular situation, a git rebase -i --abort might be needed to reset everything and allow you to try again)

As Dave Vogt mentions in the comments, git rebase --continue is for going to the next task in the rebasing process, after you've amended the first commit.

Also, Gregg Lind mentions in his answer the reword command of git rebase:

By replacing the command "pick" with the command "edit", you can tell git rebase to stop after applying that commit, so that you can edit the files and/or the commit message, amend the commit, and continue rebasing.

If you just want to edit the commit message for a commit, replace the command "pick" with the command "reword", since Git1.6.6 (January 2010).

It does the same thing ‘edit’ does during an interactive rebase, except it only lets you edit the commit message without returning control to the shell. This is extremely useful.
Currently if you want to clean up your commit messages you have to:

$ git rebase -i next

Then set all the commits to ‘edit’. Then on each one:

# Change the message in your editor.
$ git commit --amend
$ git rebase --continue

Using ‘reword’ instead of ‘edit’ lets you skip the git-commit and git-rebase calls.

CTL + M + L expands all

CTL + M + O collapses all

In the MSDN article "Default Keyboard Shortcuts in Visual Studio," see the section "Text Editor" if you're looking for other shortcuts - these 2 are just a few of the many that are available.

This is because findViewById() searches in the activity_main layout, while the button is located in the fragment's layout fragment_main.

Move that piece of code in the onCreateView() method of the fragment:

//...

View rootView = inflater.inflate(R.layout.fragment_main, container, false);
Button buttonClick = (Button)rootView.findViewById(R.id.button);
buttonClick.setOnClickListener(new View.OnClickListener() {
    @Override
    public void onClick(View view) {
        onButtonClick((Button) view);
    }
});

Notice that now you access it through rootView view:

Button buttonClick = (Button)rootView.findViewById(R.id.button);

otherwise you would get again NullPointerException.

Can be seen from UI as well. Go to overview tab on table, you will see item count. Hope it helps someone.

How about this approach, which splits the problem into two parts:

• Using jQuery, it shows a decrementing counter below the textarea, which turns red when it hits zero but still allows the user to type.
• I use a separate string length validator (server and client-side) to actually prevent submission of the form if the number of chatacters in the textarea is greater than 160.

My textarea has an id of Message, and the span in which I display the number of remaining characters has an id of counter. The css class of error gets applied when the number of remaining characters hits zero.

var charactersAllowed = 160;

$(document).ready(function () {
    $('#Message').keyup(function () {
        var left = charactersAllowed - $(this).val().length;
        if (left < 0) {
            $('#counter').addClass('error');
            left = 0;
        }
        else {
            $('#counter').removeClass('error');
        }
        $('#counter').text('Characters left: ' + left);
    });
});

Status code 0 means the requested url is not reachable. By changing http://something/something to https://something/something worked for me. IE throwns an error saying "permission denied" when the status code is 0, other browsers dont.

Look at the methods in the java.io.File class:

File file = new File("yourfileName");
String path = file.getAbsolutePath();

1. terminate sqld from task manager
2. stop MySQL from xampp control panel and restart it

if it still throw the same problem, from root folder run

php artisan cache:clear
php artisan config:cache
php artisan serve

3. if you still have the problem, check whether you are using multiple copies of sql server, for example through Ubuntu app, if so stop the MySQL server in ubuntu

   sudo service MySQL stop

Here is an interesting case: method receieves generic collection and returns generic collection of same base type. For example:

Collection<? extends Assertion> map(Collection<? extends Assertion> assertions);

This method can be mocked with combination of Mockito anyCollectionOf matcher and the Answer.

when(mockedObject.map(anyCollectionOf(Assertion.class))).thenAnswer(
     new Answer<Collection<Assertion>>() {
         @Override
         public Collection<Assertion> answer(InvocationOnMock invocation) throws Throwable {
             return new ArrayList<Assertion>();
         }
     });

XML versus XSD

XML defines the syntax of elements and attributes for structuring data in a well-formed document.

XSD _{^{(aka XML Schema)}}, like DTD before, powers the eXtensibility in XML by enabling the user to define the vocabulary and grammar of the elements and attributes in a valid XML document.

you can use this code .may be solve the problem

Intent intent = new Intent(Intent.ACTION_VIEW,Uri.parse("http://192.168.43.1:6789/mobile_base/test.apk"));
startActivity(intent);

use filter

var json = {
    homes: [{
            "home_id": "1",
            "price": "925",
            "sqft": "1100",
            "num_of_beds": "2",
            "num_of_baths": "2.0",
        }, {
            "home_id": "2",
            "price": "1425",
            "sqft": "1900",
            "num_of_beds": "4",
            "num_of_baths": "2.5",
        },
         
    ]
}


let filter = 
  json.homes.filter(d => 
  
    d.price >= 1000 & 
    d.sqft >= 500 & 
    d.num_of_beds >=2 & 
    d.num_of_baths >= 2.5
)

console.log(filter)

I have a huge database with no (separate) index.

Any time I query by the primary key the results are, for all intensive purposes, instant.

You can use the following code snippet :

java -XX:+PrintFlagsFinal -Xms512m -Xmx1024m -Xss512k -XX:PermSize=64m -XX:MaxPermSize=128m
    -version | grep -iE 'HeapSize|PermSize|ThreadStackSize'

In my pc I am getting following output :

    uintx InitialHeapSize                          := 536870912       {product}
    uintx MaxHeapSize                              := 1073741824      {product}
    uintx PermSize                                 := 67108864        {pd product}
    uintx MaxPermSize                              := 134217728       {pd product}
     intx ThreadStackSize                          := 512             {pd product}

I think I found a simpler solution, only this uses a subclass of ViewPager instead of (its parent) ScrollView.

UPDATE 2013-07-16: I added an override for onTouchEvent as well. It could possibly help with the issues mentioned in the comments, although YMMV.

public class UninterceptableViewPager extends ViewPager {

    public UninterceptableViewPager(Context context, AttributeSet attrs) {
        super(context, attrs);
    }

    @Override
    public boolean onInterceptTouchEvent(MotionEvent ev) {
        boolean ret = super.onInterceptTouchEvent(ev);
        if (ret)
            getParent().requestDisallowInterceptTouchEvent(true);
        return ret;
    }

    @Override
    public boolean onTouchEvent(MotionEvent ev) {
        boolean ret = super.onTouchEvent(ev);
        if (ret)
            getParent().requestDisallowInterceptTouchEvent(true);
        return ret;
    }
}

This is similar to the technique used in android.widget.Gallery's onScroll(). It is further explained by the Google I/O 2013 presentation Writing Custom Views for Android.

Update 2013-12-10: A similar approach is also described in a post from Kirill Grouchnikov about the (then) Android Market app.

Here is an elegant library that records video in all supported browsers and supports uploading:

https://www.npmjs.com/package/videojs-record

Change the wrapping from "onload" to "No wrap - in <body>"

The function defined has a different scope.

If you happen to be using sass in a build system, one way to do this that will work in all the major browsers is to wrap all your style imports with a :not() selector like so...

:not(.disable-all-styles) {
  @import 'my-sass-file';
  @import 'my-other-sass-file';
}

Then you can use the disable class on a container and the sub-content won't have any of your styles.

<div class="disable-all-styles">
  <p>Nothing in this div is affected by my sass styles.</p>
</div>

Of course all your styles will now be prepended with the :not() selector, so it's a little fugly, but works well.

If you can get away with using Guava it is by far the simplest way to do it, and you don't have to reinvent the wheel:

final HashCode hashCode = Hashing.sha1().hashString(yourValue, Charset.defaultCharset());

You can then take the hashed value and get it as a byte[], as an int, or as a long.

No wrapping in a try catch, no shenanigans. And if you decide you want to use something other than SHA-1, Guava also supports sha256, sha 512, and a few I had never even heard about like adler32 and murmur3.

Find matching th for a td, taking into account colspan index issues.

$('table').on('click', 'td', get_TH_by_TD)_x000D_
_x000D_
function get_TH_by_TD(e){_x000D_
   var idx = $(this).index(),_x000D_
       th, th_colSpan = 0;_x000D_
_x000D_
   for( var i=0; i < this.offsetParent.tHead.rows[0].cells.length; i++ ){_x000D_
      th = this.offsetParent.tHead.rows[0].cells[i];_x000D_
      th_colSpan += th.colSpan;_x000D_
      if( th_colSpan >= (idx + this.colSpan) )_x000D_
        break;_x000D_
   }_x000D_
   _x000D_
   console.clear();_x000D_
   console.log( th );_x000D_
   return th;_x000D_
}

table{ width:100%; }_x000D_
th, td{ border:1px solid silver; padding:5px; }

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
_x000D_
<p>Click a TD:</p>_x000D_
<table>_x000D_
    <thead> _x000D_
        <tr>_x000D_
            <th colspan="2"></th>_x000D_
            <th>Name</th>_x000D_
            <th colspan="2">Address</th>_x000D_
            <th colspan="2">Other</th>_x000D_
        </tr>_x000D_
    </thead> _x000D_
    <tbody>_x000D_
        <tr>_x000D_
            <td>X</td>_x000D_
            <td>1</td>_x000D_
            <td>Jon Snow</td>_x000D_
            <td>12</td>_x000D_
            <td>High Street</td>_x000D_
            <td>Postfix</td>_x000D_
            <td>Public</td>_x000D_
        </tr>_x000D_
    </tbody>_x000D_
</table>

Just change the target to "ES2017" in tsconfig.json file.

this is my tsconfig.json file

{
"compilerOptions": {
/* Basic Options */
    "target": "ES2017",   /* Specify ECMAScript target version: 'ES3' (default), 'ES5', 'ES2015', 'ES2016', 'ES2017', or 'ESNEXT'. */
    "module": "commonjs", /* Specify module code generation: 'none', 'commonjs', 'amd', 'system', 'umd', 'es2015', or 'ESNext'. */
    "declaration": true,  /* Generates corresponding '.d.ts' file. */
    "sourceMap": true,    /* Generates corresponding '.map' file. */
    "outDir": "./dist",   /* Redirect output structure to the directory. */
    "strict": true        /* Enable all strict type-checking options. */
  },
  "include": [
    "src/**/*"
  ],
  "exclude": [
    "node_modules"
  ]
}

I had the same problem and the only thing that works for my was to uninstall entity framework package from each project using Uninstall-Package. And then intall it again in the whole solution. It will ask you to choose in which project you want to install it, you shall select all.

A HANDLE is a context-specific unique identifier. By context-specific, I mean that a handle obtained from one context cannot necessarily be used in any other aribtrary context that also works on HANDLEs.

For example, GetModuleHandle returns a unique identifier to a currently loaded module. The returned handle can be used in other functions that accept module handles. It cannot be given to functions that require other types of handles. For example, you couldn't give a handle returned from GetModuleHandle to HeapDestroy and expect it to do something sensible.

The HANDLE itself is just an integral type. Usually, but not necessarily, it is a pointer to some underlying type or memory location. For example, the HANDLE returned by GetModuleHandle is actually a pointer to the base virtual memory address of the module. But there is no rule stating that handles must be pointers. A handle could also just be a simple integer (which could possibly be used by some Win32 API as an index into an array).

HANDLEs are intentionally opaque representations that provide encapsulation and abstraction from internal Win32 resources. This way, the Win32 APIs could potentially change the underlying type behind a HANDLE, without it impacting user code in any way (at least that's the idea).

Consider these three different internal implementations of a Win32 API that I just made up, and assume that Widget is a struct.

Widget * GetWidget (std::string name)
{
    Widget *w;

    w = findWidget(name);

    return w;
}

void * GetWidget (std::string name)
{
    Widget *w;

    w = findWidget(name);

    return reinterpret_cast<void *>(w);
}

typedef void * HANDLE;

HANDLE GetWidget (std::string name)
{
    Widget *w;

    w = findWidget(name);

    return reinterpret_cast<HANDLE>(w);
}

The first example exposes the internal details about the API: it allows the user code to know that GetWidget returns a pointer to a struct Widget. This has a couple of consequences:

• the user code must have access to the header file that defines the Widget struct
• the user code could potentially modify internal parts of the returned Widget struct

Both of these consequences may be undesirable.

The second example hides this internal detail from the user code, by returning just void *. The user code doesn't need access to the header that defines the Widget struct.

The third example is exactly the same as the second, but we just call the void * a HANDLE instead. Perhaps this discourages user code from trying to figure out exactly what the void * points to.

Why go through this trouble? Consider this fourth example of a newer version of this same API:

typedef void * HANDLE;

HANDLE GetWidget (std::string name)
{
    NewImprovedWidget *w;

    w = findImprovedWidget(name);

    return reinterpret_cast<HANDLE>(w);
}

Notice that the function's interface is identical to the third example above. This means that user code can continue to use this new version of the API, without any changes, even though the "behind the scenes" implementation has changed to use the NewImprovedWidget struct instead.

The handles in these example are really just a new, presumably friendlier, name for void *, which is exactly what a HANDLE is in the Win32 API (look it up at MSDN). It provides an opaque wall between the user code and the Win32 library's internal representations that increases portability, between versions of Windows, of code that uses the Win32 API.

I would recommend a wrapper that will handle value being changed. For example you can have JavaScript function, like this:

?function Variable(initVal, onChange)
{
    this.val = initVal;          //Value to be stored in this object
    this.onChange = onChange;    //OnChange handler

    //This method returns stored value
    this.GetValue = function()  
    {
        return this.val;
    }

    //This method changes the value and calls the given handler       
    this.SetValue = function(value)
    {
        this.val = value;
        this.onChange();
    }


}

And then you can make an object out of it that will hold value that you want to monitor, and also a function that will be called when the value gets changed. For example, if you want to be alerted when the value changes, and initial value is 10, you would write code like this:

var myVar = new Variable(10, function(){alert("Value changed!");});

Handler function(){alert("Value changed!");} will be called (if you look at the code) when SetValue() is called.

You can get value like so:

alert(myVar.GetValue());

You can set value like so:

myVar.SetValue(12);

And immediately after, an alert will be shown on the screen. See how it works: http://jsfiddle.net/cDJsB/

The ready event is always execute at the only html page is loaded to the browser and the functions are executed.... But the load event is executed at the time of all the page contents are loaded to the browser for the page..... we can use $ or jQuery when we use the noconflict() method in jquery scripts...

The same origin policy is applicable only for browser side programming languages. So if you try to post to a different server than the origin server using JavaScript, then the same origin policy comes into play but if you post directly from the form i.e. the action points to a different server like:

<form action="http://someotherserver.com">

and there is no javascript involved in posting the form, then the same origin policy is not applicable.

See wikipedia for more information

use:

std::vector <Acard> playerHand;

everywhere qualify it by std::

or do:

using std::vector;

in your cpp file.

You have to do this because vector is defined in the std namespace and you do not tell your program to find it in std namespace, you need to tell that.

Related to this I went through a similar problem, but not with get or post made by Angular but with an extension made by a 3rd party (in my case Chrome Extension).
The problem that I faced is that the Chrome Extension won't return then() so I was unable to do it the way in the solution above but the result is still Asynchronous.
So my solution is to create a service and to proceed to a callback

app.service('cookieInfoService', function() {
    this.getInfo = function(callback) {
        var model = {};
        chrome.cookies.get({url:serverUrl, name:'userId'}, function (response) {
            model.response= response;
            callback(model);
        });
    };
});

Then in my controller

app.controller("MyCtrl", function ($scope, cookieInfoService) {
    cookieInfoService.getInfo(function (info) {
        console.log(info);
    });
});

Hope this can help others getting the same issue.

Here is a very simple piece of C# code to test the CommandTimeout with. It creates a new command which will wait for 2 seconds. Set the CommandTimeout to 1 second and you will see an exception when running it. Setting the CommandTimeout to either 0 or something higher than 2 will run fine. By the way, the default CommandTimeout is 30 seconds.

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

using System.Data.SqlClient;

namespace ConsoleApplication1
{
  class Program
  {
    static void Main(string[] args)
    {
      var builder = new SqlConnectionStringBuilder();
      builder.DataSource = "localhost";
      builder.IntegratedSecurity = true;
      builder.InitialCatalog = "master";

      var connectionString = builder.ConnectionString;

      using (var connection = new SqlConnection(connectionString))
      {
        connection.Open();

        using (var command = connection.CreateCommand())
        {
          command.CommandText = "WAITFOR DELAY '00:00:02'";
          command.CommandTimeout = 1;

          command.ExecuteNonQuery();
        }
      }
    }
  }
}

You have set the upstream of that branch

(see:

• "How do you make an existing git branch track a remote branch?" and
• "Git: Why do I need to do --set-upstream-to all the time?"
  )

git branch -f --track my_local_branch origin/my_remote_branch
# OR (if my_local_branch is currently checked out):
$ git branch --set-upstream-to my_local_branch origin/my_remote_branch

(git branch -f --track won't work if the branch is checked out: use the second command git branch --set-upstream-to instead, or you would get "fatal: Cannot force update the current branch.")

That means your branch is already configured with:

branch.my_local_branch.remote origin
branch.my_local_branch.merge my_remote_branch

Git already has all the necessary information.
In that case:

# if you weren't already on my_local_branch branch:
git checkout my_local_branch 
# then:
git pull

is enough.

If you hadn't establish that upstream branch relationship when it came to push your 'my_local_branch', then a simple git push -u origin my_local_branch:my_remote_branch would have been enough to push and set the upstream branch.
After that, for the subsequent pulls/pushes, git pull or git push would, again, have been enough.

Just try the code below:

As I see you have inserted 'r+' or this command open the file in read mode so you are not able to write into it, so you have to open file in write mode 'w' if you want to overwrite the file contents and write new data, otherwise you can append data to file by using 'a'

I hope this will help ;)

f = open('testfile.txt', 'w')# just put 'w' if you want to write to the file 

x = f.readlines() #this command will read file lines

y = int(x)+1

print y
z = str(y) #making data as string to avoid buffer error
f.write(z)

f.close()

I checked most of these answers. then decided to check out Angular documentation on Layout.

Angular has its own Observer for detecting different sizes and it is easy to implement into the component or a Service.

a simpl example would be:

import {BreakpointObserver, Breakpoints} from '@angular/cdk/layout';_x000D_
_x000D_
@Component({...})_x000D_
class MyComponent {_x000D_
  constructor(breakpointObserver: BreakpointObserver) {_x000D_
    breakpointObserver.observe([_x000D_
      Breakpoints.HandsetLandscape,_x000D_
      Breakpoints.HandsetPortrait_x000D_
    ]).subscribe(result => {_x000D_
      if (result.matches) {_x000D_
        this.activateHandsetLayout();_x000D_
      }_x000D_
    });_x000D_
  }_x000D_
}

hope it helps

After reading this post some time ago I was wondering if it was safe to use domains for exception handling on an api / function level. I wanted to use them to simplify exception handling code in each async function I wrote. My concern was that using a new domain for each function would introduce significant overhead. My homework seems to indicate that there is minimal overhead and that performance is actually better with domains than with try catch in some situations.

http://www.lighthouselogic.com/#/using-a-new-domain-for-each-async-function-in-node/

as I expected, yeah, it's because the whole DOM element is being pushed down. You have multiple options. You can put the buttons in separate divs, and float them so that they don't affect each other. the simpler solution is to just set the :active button to position:relative; and use top instead of margin or line-height. example fiddle: http://jsfiddle.net/5CZRP/

Try restarting the mysql or starting it if it wasn't started already. Type this within terminal.

mysql.server restart

To auto start go to the following link below:

How to auto-load MySQL on startup on OS X Yosemite / El Capitan

No jQuery Needed

if (str.match(/[a-z]/i)) {
    // alphabet letters found
}

Use the below method to allow css styles in innerhtml.

import { DomSanitizer, SafeHtml } from '@angular/platform-browser';
.
.
.
.
html: SafeHtml;

constructor(protected _sanitizer: DomSanitizer) {
this.html = this._sanitizer.bypassSecurityTrustHtml(`
<html>
  <head></head>
  <body>
    <div style="display:flex; color: blue;">
      <div>
        <h1>Hello World..!!!!!</h1>
      </div>
    </div>
  </body>
</html>`);
}

Example code stackblitz

Or use the below method to write directly in html. https://gist.github.com/klihelp/4dcac910124409fa7bd20f230818c8d1

In addition to values_list as Daniel mentions you can also use only (or defer for the opposite effect) to get a queryset of objects only having their id and specified fields:

Employees.objects.only('eng_name')

This will run a single query:

SELECT id, eng_name FROM employees

Try to relay an array into newArray when looping:

var auctions = Auction.auctions;
var auctionIndex;
var auction;
var newAuctions = [];

for (
  auctionIndex = 0; 
  auctionIndex < Auction.auctions.length;
  auctionIndex++) {

  auction = auctions[auctionIndex];

  if (auction.seconds >= 0) { 
    newAuctions.push(
      auction);
  }    
}

Auction.auctions = newAuctions;

I used similar code to @MethodMan but I had to keep track of the data the serial port was sending and look for a terminating character to know when the serial port was done sending data.

private string buffer { get; set; }
private SerialPort _port { get; set; }

public Port() 
{
    _port = new SerialPort();
    _port.DataReceived += new SerialDataReceivedEventHandler(dataReceived);
    buffer = string.Empty;
}

private void dataReceived(object sender, SerialDataReceivedEventArgs e)
{    
    buffer += _port.ReadExisting();

    //test for termination character in buffer
    if (buffer.Contains("\r\n"))
    {
        //run code on data received from serial port
    }
}

Right now, you're creating an instance of every type defined in the assembly. You only need to create a single instance of Class1 in order to call the method:

class Program
{
    static void Main(string[] args)
    {
        var DLL = Assembly.LoadFile(@"C:\visual studio 2012\Projects\ConsoleApplication1\ConsoleApplication1\DLL.dll");

        var theType = DLL.GetType("DLL.Class1");
        var c = Activator.CreateInstance(theType);
        var method = theType.GetMethod("Output");
        method.Invoke(c, new object[]{@"Hello"});

        Console.ReadLine();
    }
}

BufferedImage in = ImageIO.read(img);

BufferedImage newImage = new BufferedImage(
    in.getWidth(), in.getHeight(), BufferedImage.TYPE_INT_ARGB);

Graphics2D g = newImage.createGraphics();
g.drawImage(in, 0, 0, null);
g.dispose();

Your syntax is pretty screwy.

Change this:

input:not(disabled)not:[type="submit"]:focus{

to:

input:not(:disabled):not([type="submit"]):focus{

Seems that many people don't realize :enabled and :disabled are valid CSS selectors...

We need a trick here...

Normal select-dropdown things won't accept styles. BUT. If there's a "size" parameter in the tag, almost any CSS will apply. With this in mind, I've created a fiddle that's practically equivalent to a normal select tag, plus the value can be edited manually like a ComboBox in visual languages (unless you put readonly in the input tag).

A simplified example:

<style>

    /* only these 2 lines are truly required */
    .stylish span {position:relative;}
    .stylish select {position:absolute;left:0px;display:none}

    /* now you can style the hell out of them */
    .stylish input    { ... }
    .stylish select   { ... }
    .stylish option   { ... }
    .stylish optgroup { ... }

</style>
...
<div class="stylish">
    <label> Choose your superhero: </label>
    <span>
        <input onclick="$(this).closest('div').find('select').slideToggle(110)">
        <br>
        <select size=15 onclick="$(this).hide().closest('div').find('input').val($(this).find('option:selected').text());">

            <optgroup label="Fantasy"></optgroup>
            <option value="gandalf">Gandalf</option>
            <option value="harry">Harry Potter</option>
            <option value="jon">Jon Snow</option>

            <optgroup label="Comics"></optgroup>
            <option value="tony">Tony Stark</option>
            <option value="steve">Steven Rogers</option>
            <option value="natasha">Natasha Romanova</option>

        </select>
    </span>
    <!--

        For the sake of simplicity, I used jQuery here.
        Today it's easy to do the same without it, now
        that we have querySelector(), closest(), etc.

    -->
</div>

A live example:

https://jsfiddle.net/7ac9us70/1052/

Note 1: Sorry for the gradients & all fancy stuff, no they're not necessary, yes I'm showing off, I know, hashtag onlyhuman, hashtag notproud.

Note 2: Those <optgroup> tags don't encapsulate the options belonging under them as they normally should; this is intentional. It's better for the styling (the well-mannered way would be a lot less stylable), and yes this is painless and works in every browser.

I'd use iloc, which takes a row/column slice, both based on integer position and following normal python syntax. If you want every 5th row:

df.iloc[::5, :]

Simplest way is to just use the ShellJS lib ...

$ npm install [-g] shelljs

EXEC Example:

require('shelljs/global');

// Sync call to exec()
var version = exec('node --version', {silent:true}).output;

// Async call to exec()
exec('netstat.exe -an', function(status, output) {
  console.log('Exit status:', status);
  console.log('Program output:', output);
});

ShellJs.org supports many common shell commands mapped as NodeJS functions including:

• cat
• cd
• chmod
• cp
• dirs
• echo
• exec
• exit
• find
• grep
• ln
• ls
• mkdir
• mv
• popd
• pushd
• pwd
• rm
• sed
• test
• which

It is bounded on the lower end by 2^(n/2) and on the upper end by 2^n (as noted in other comments). And an interesting fact of that recursive implementation is that it has a tight asymptotic bound of Fib(n) itself. These facts can be summarized:

T(n) = O(2^(n/2))  (lower bound)
T(n) = O(2^n)   (upper bound)
T(n) = T(Fib(n)) (tight bound)

The tight bound can be reduced further using its closed form if you like.

Here's an alternate

req.hostname

Read about it in the Express Docs.

Because if none of the if statements evaluate to true then the local variable will be unassigned. Throw an else statement in there and assign some values to those variables in case the if statements don't evaluate to true. Post back here if that doesn't make the error go away.

Your other option is to initialize the variables to some default value when you declare them at the beginning of your code.