Because the operating system may not do so. The flush operation forces the file data into the file cache in RAM, and from there it's the OS's job to actually send it to the disk.

Following command resolved my issue:

sudo chown -R _mysql:mysql /usr/local/var/mysql

sudo mysql.server start

To convert a valid JSON string back, you can use the json_decode() method.

To convert it back to an object use this method:

$jObj = json_decode($jsonString);

And to convert it to a associative array, set the second parameter to true:

$jArr = json_decode($jsonString, true);

By the way to convert your mentioned string back to either of those, you should have a valid JSON string. To achieve it, you should do the following:

1. In the Coords array, remove the two " (double quote marks) from the start and end of the object.
2. The objects in an array are comma seprated (,), so add commas between the objects in the Coords array..

And you will have a valid JSON String..

Here is your JSON String I converted to a valid one: http://pastebin.com/R16NVerw

If I'm not mistaken you're looking for the FolderBrowserDialog (hence the naming):

var dialog = new System.Windows.Forms.FolderBrowserDialog();
System.Windows.Forms.DialogResult result = dialog.ShowDialog();

Also see this SO thread: Open directory dialog

Client Upload

If you want to upload a single file with Python requests library, then requests lib supports streaming uploads, which allow you to send large files or streams without reading into memory.

with open('massive-body', 'rb') as f:
    requests.post('http://some.url/streamed', data=f)

Server Side

Then store the file on the server.py side such that save the stream into file without loading into the memory. Following is an example with using Flask file uploads.

@app.route("/upload", methods=['POST'])
def upload_file():
    from werkzeug.datastructures import FileStorage
    FileStorage(request.stream).save(os.path.join(app.config['UPLOAD_FOLDER'], filename))
    return 'OK', 200

Or use werkzeug Form Data Parsing as mentioned in a fix for the issue of "large file uploads eating up memory" in order to avoid using memory inefficiently on large files upload (s.t. 22 GiB file in ~60 seconds. Memory usage is constant at about 13 MiB.).

@app.route("/upload", methods=['POST'])
def upload_file():
    def custom_stream_factory(total_content_length, filename, content_type, content_length=None):
        import tempfile
        tmpfile = tempfile.NamedTemporaryFile('wb+', prefix='flaskapp', suffix='.nc')
        app.logger.info("start receiving file ... filename => " + str(tmpfile.name))
        return tmpfile

    import werkzeug, flask
    stream, form, files = werkzeug.formparser.parse_form_data(flask.request.environ, stream_factory=custom_stream_factory)
    for fil in files.values():
        app.logger.info(" ".join(["saved form name", fil.name, "submitted as", fil.filename, "to temporary file", fil.stream.name]))
        # Do whatever with stored file at `fil.stream.name`
    return 'OK', 200

select * from table where id not in (select id from table limit 10)

where id be the key in your table.

Make sure you are using that command in the Go project source folder (like /Users/7yan00/Golang/src/myProject).

One alternative (similar to this bug) is to use the -d option (see go get command)

go get -d

The -d flag instructs get to stop after downloading the packages; that is, it instructs get not to install the packages.

See if that helps in your case.

But more generally, as described in this thread:

go get is for package(s), not for repositories.

so if you want a specific package, say, go.text/encoding, then use

go get code.google.com/p/go.text/encoding

if you want all packages in that repository, use ... to signify that:

go get code.google.com/p/go.text/...

I have also faced the problem. In the php file, I have written following code where there was some space before php start tag

<?php
namespace App\Controller;

when I remove that space, it solved.

If an activity needs to make a fragment perform an action after initialization, the easiest way is by having the activity invoke a method on the fragment instance. In the fragment, add a method:

public class DemoFragment extends Fragment {
  public void doSomething(String param) {
      // do something in fragment
  }
}

and then in the activity, get access to the fragment using the fragment manager and call the method:

public class MainActivity extends FragmentActivity {
    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        DemoFragment fragmentDemo = (DemoFragment) 
            getSupportFragmentManager().findFragmentById(R.id.fragmentDemo);
        fragmentDemo.doSomething("some param");
    }
}

and then the activity can communicate directly with the fragment by invoking this method.

Complementing in C# with SQL:

SqlConnection conn = new SqlConnection("ConnectionString");
conn.Open();
SqlCommand comm = new SqlCommand("SELECT COUNT(*) FROM table_name", conn);
Int32 count = Convert.ToInt32(comm.ExecuteScalar());
if (count > 0)
{
    lblCount.Text = Convert.ToString(count.ToString()); //For example a Label
}
else
{
    lblCount.Text = "0";
}
conn.Close(); //Remember close the connection

There can be any possible reason:

1. Your module does not have CommonModule in imports[]
2. Your component, where you are using *ngFor, is not a part of any module.
3. You might have syntax error in *ngFor i.e. **ngFor or *ngfor etc. typo.
4. If everything seems fine then restart your IDE i.e. VS Code, IntelliJ etc.

If you are saying you wanna pass javascript value from one jsp to another in javascript then use URLRewriting technique to pass javascript variable to next jsp file and access that in next jsp in request object.

Other wise you can't do it.

Use .ashx file type and use the same code

cmake --build . --verbose

On Linux and with Makefile generation, this is likely just calling make VERBOSE=1 under the hood, but cmake --build can be more portable for your build system, e.g. working across OSes or if you decide to do e.g. Ninja builds later on:

mkdir build
cd build
cmake ..
cmake --build . --verbose

Its documentation also suggests that it is equivalent to VERBOSE=1:

--verbose, -v

Enable verbose output - if supported - including the build commands to be executed.

This option can be omitted if VERBOSE environment variable or CMAKE_VERBOSE_MAKEFILE cached variable is set.

If you are using Windows,

1. make a folder and open git bash from there

2. in the git bash,

   git clone [email protected]:Example/projectName.git

There is nothing wrong with syntax of

$('#part' + number).html(text);

jQuery accepts a String (usually a CSS Selector) or a DOM Node as parameter to create a jQuery Object.

In your case you should pass a String to $() that is

$(<a string>)

Make sure you have access to the variables number and text.

To test do:

function(){
    alert(number + ":" + text);//or use console.log(number + ":" + text)
    $('#part' + number).html(text);
}); 

If you see you dont have access, pass them as parameters to the function, you have to include the uual parameters for $.get and pass the custom parameters after them.

If your'e using Web Forms then Grid View can work very nicely for this

The code looks a little like this.

aspx page.

<asp:GridView ID="GridView1" runat="server" DataKeyNames="Name,Size,Quantity,Amount,Duration"></asp:GridView>

You can either input the data manually or use the source method in the code side

public class Room
{
    public string Name
    public double Size {get; set;}
    public int Quantity {get; set;}
    public double Amount {get; set;}
    public int Duration {get; set;}
}

protected void Page_Load(object sender, EventArgs e)
{
    if(!IsPostBack)//this is so you can keep any data you want for the list
    {
        List<Room> rooms=new List<Room>();
        //then use the rooms.Add() to add the rooms you need.
        GridView1.DataSource=rooms
        GridView1.Databind()
    }
}

Personally I like MVC4 the client side code ends up much lighter than Web Forms. It is similar to the above example with using a class but you use a view and Controller instead.

The View would look like this.

@model YourProject.Model.IEnumerable<Room>

<table>
    <th>
        <td>@Html.LabelFor(model => model.Name)</td>
        <td>@Html.LabelFor(model => model.Size)</td>
        <td>@Html.LabelFor(model => model.Quantity)</td>
        <td>@Html.LabelFor(model => model.Amount)</td>
        <td>@Html.LabelFor(model => model.Duration)</td>
   </th>
foreach(item in model)
{
    <tr>
        <td>@model.Name</td>
        <td>@model.Size</td>
        <td>@model.Quantity</td>
        <td>@model.Amount</td>
        <td>@model.Duration</td>
   </tr>
}
</table>

The controller might look something like this.

public ActionResult Index()
{
    List<Room> rooms=new List<Room>();
    //again add the items you need

    return View(rooms);
}

Hope this helps :)

How about moving @Transactional from method to class level? Worked for me in similar case, though I'm not 100% certain why.

CSS3 has a pseudo-class called :not()

input:not([type='checkbox']) {    
    visibility: hidden;
}

<p>If <code>:not()</code> is supported, you'll only see the checkbox.</p>
                                      
<ul>
  <li>text: (<input type="text">)</li>  
  <li>password (<input type="password">)</li>       
  <li>checkbox (<input type="checkbox">)</li> 
 </ul>

Multiple selectors

As Vincent mentioned, it's possible to string multiple :not()s together:

input:not([type='checkbox']):not([type='submit'])

CSS4, which is supported in many of the latest browser releases, allows multiple selectors in a :not()

input:not([type='checkbox'],[type='submit'])

Legacy support

All modern browsers support the CSS3 syntax. At the time this question was asked, we needed a fall-back for IE7 and IE8. One option was to use a polyfill like IE9.js. Another was to exploit the cascade in CSS:

input {
   // styles for most inputs
}   

input[type=checkbox] {
  // revert back to the original style
} 

input.checkbox {
  // for completeness, this would have worked even in IE3!
} 

You cannot iterate backwards with the jQuery each function, but you can still leverage jQuery syntax.

Try the following:

//get an array of the matching DOM elements   
var liItems = $("ul#myUL li").get();

//iterate through this array in reverse order    
for(var i = liItems.length - 1; i >= 0; --i)
{
  //do Something
}

I had run into the same issue while I was dealing with large dataset. One thing I've noticed was the NoSuchElementException is thrown when the Scanner reaches the endOfFile, where it is not going to affect our data.

Here, I've placed my code in try block and catch block handles the exception. You can also leave it empty, if you don't want to perform any task.

For the above question, because you are using file.next() both in the condition and in the while loop you can handle the exception as

while(!file.next().equals(treasure)){
    try{
        file.next(); //stack trace error here
       }catch(NoSuchElementException e) {  }
}

This worked perfectly for me, if there are any corner cases for my approach, do let me know through comments.

We can do this using several ways.

Using template comparator parameter

    int main() 
    {
      priority_queue<int, vector<int>, greater<int> > pq;

      pq.push(40);
      pq.push(320);
      pq.push(42);
      pq.push(65);
      pq.push(12);

      cout<<pq.top()<<endl;
      return 0;
    }

Using used defined compartor class

     struct comp
     {
        bool operator () (int lhs, int rhs)
        {
           return lhs > rhs;
        }
     };

    int main()
    {
       priority_queue<int, vector<int>, comp> pq;

       pq.push(40);
       pq.push(320);
       pq.push(42);
       pq.push(65);
       pq.push(12);

       cout<<pq.top()<<endl;

       return 0;
    }

There is one rule that is set by font-awesome.css, which you need to override.

You should set overrides in your CSS files rather than inline, but essentially, the icon-ok class is being set to vertical-align: baseline; by default and which I've corrected here:

<button id="whatever" class="btn btn-large btn-primary" name="Continue" type="submit">
    <span>Continue</span>
    <i class="icon-ok" style="font-size:30px; vertical-align: middle;"></i>
</button>

Example here: http://jsfiddle.net/fPXFY/4/ and the output of which is:

I've downsized the font-size of the icon above in this instance to 30px, as it feels too big at 40px for the size of the button, but this is purely a personal viewpoint. You could increase the padding on the button to compensate if required:

<button id="whaever" class="btn btn-large btn-primary" style="padding: 20px;" name="Continue" type="submit">
    <span>Continue</span>
    <i class="icon-ok" style="font-size:30px; vertical-align: middle;"></i>
</button>

Producing: http://jsfiddle.net/fPXFY/5/ the output of which is:

I think you can use JSON.stringify:

// after your each loop
JSON.stringify(values);

Double Click the Login Button in the NETBEANS or add the Event Listener on Click Event (ActionListener)

btnLogin.addActionListener(new ActionListener() 
{
    public void actionPerformed(ActionEvent e) {
        this.setVisible(false);
        new FrmMain().setVisible(true); // Main Form to show after the Login Form..
    }
});

There is another way. If you're passing an object by reference, that object's properties will appear in the function's local scope. I know this works for Safari (haven't checked other browsers) and I don't know if this feature has a name, but the below example illustrates its use.

Although in practice I don't think that this offers any functional value beyond the technique you're already using, it's a little cleaner semantically. And it still requires passing a object reference or an object literal.

function sum({ a:a, b:b}) {
    console.log(a+'+'+b);
    if(a==undefined) a=0;
    if(b==undefined) b=0;
    return (a+b);
}

// will work (returns 9 and 3 respectively)
console.log(sum({a:4,b:5}));
console.log(sum({a:3}));

// will not work (returns 0)
console.log(sum(4,5));
console.log(sum(4));

To find distinct in field_1 in collection but we want some WHERE condition too than we can do like following :

db.your_collection_name.distinct('field_1', {WHERE condition here and it should return a document})

So, find number distinct names from a collection where age > 25 will be like :

db.your_collection_name.distinct('names', {'age': {"$gt": 25}})

Hope it helps!

var json_data = {"2013-01-21":1,"2013-01-22":7};
var result = [];

for(var i in json_data)
    result.push([i, json_data [i]]);


var data = new google.visualization.DataTable();
data.addColumn('string', 'Topping');
data.addColumn('number', 'Slices');
data.addRows(result);

http://jsfiddle.net/MV5rj/

I would like to present another answer to this as the currently accepted answer doesn't work for me (I use LibreOffice). This solution should work in Excel, LibreOffice and OpenOffice:

First, insert a new row at the beginning of the sheet. Within that row, define the names you need:

Then, in the menu bar, go to View -> Freeze Cells -> Freeze First Row. It'll look like this now:

Now whenever you scroll down in the document, the first row will be "pinned" to the top:

The text of a draft of the ANSI C standard (aka C.89) is available online. This was standardized by the ANSI committee prior to acceptance by the ISO C Standard (C.90), so the numbering of the sections differ (ANSI sections 2 through 4 correspond roughly to ISO sections 5 through 7), although the content is (supposed to be) largely identical.

You need the :not() selector:

$('div[class^="first-"]:not(.first-bar)')

or, alternatively, the .not() method:

$('div[class^="first-"]').not('.first-bar');

The href attribute defines the URL of the resource of a link. If the anchor tag does not have href tag then it will not become hyperlink. The href attribute have the following values:

1. Absolute path: move to another site like href="http://www.google.com"
2. Relative path: move to another page within the site like herf ="defaultpage.aspx"
3. Move to an element with a specified id within the page like href="#bottom"
4. href="javascript:void(0)", it does not move anywhere.
5. href="#" , it does not move anywhere but scroll on the top of the current page.
6. href= "" , it will load the current page but some browsers causes forbidden errors.

Note: When we do not need to specified any url inside a anchor tag then use 
<a href="javascript:void(0)">Test1</a>

The selected answer doesn't work quite well with multiple sessions and doesn't allow to specify a custom log file name.

For multiple screen sessions, this is my formula:

1. Create a configuration file for each process:

   logfile test.log
   logfile flush 1
   log on
   logtstamp after 1
   logtstamp string "[ %t: %Y-%m-%d %c:%s ]\012"
   logtstamp on
   

   If you want to do it "on the fly", you can change logfile automatically. \012 means "new line", as using \n will print it on the log file: source.

2. Start your command with the "-c" and "-L" flags:

   screen -c ./test.conf -dmSL 'Test' ./test.pl
   

   That's it. You will see "test.log" after the first flush:

   ...
   6 Something is happening...
   [ test.pl: 2016-06-01 13:02:53 ]
   7 Something else...
   [ test.pl: 2016-06-01 13:02:54 ]
   8 Nothing here
   [ test.pl: 2016-06-01 13:02:55 ]
   9 Something is happening...
   [ test.pl: 2016-06-01 13:02:56 ]
   10 Something else...
   [ test.pl: 2016-06-01 13:02:57 ]
   11 Nothing here
   [ test.pl: 2016-06-01 13:02:58 ]
   ...
   

I found that "-L" is still required even when "log on" is on the configuration file.

I couldn't find a list of the time format variables (like %m) used by screen. If you have a link of those formats, please post it bellow.

Extra

In case you want to do it "on the fly", you can use this script:

#!/bin/bash
if [[ $2 == "" ]]; then
    echo "Usage: $0 name command";
    exit 1;
fi
name=$1
command=$2
path="/var/log";
config="logfile ${path}/${name}.log
logfile flush 1
log on
logtstamp after 1
logtstamp string \"[ %t: %Y-%m-%d %c:%s ]\012\"
logtstamp on";
echo "$config" > /tmp/log.conf
screen -c /tmp/log.conf -dmSL "$name" $command
rm /tmp/log.conf

To use it, save it (screen.sh) and set +x permissions:

./screen.sh TEST ./test.pl

... and will execute ./test.pl and create a log file in /var/log/TEST.log

Pure JS

You can use fetch optionally with await-try-catch

let photo = document.getElementById("image-file").files[0];
let formData = new FormData();
     
formData.append("photo", photo);
fetch('/upload/image', {method: "POST", body: formData});

async function SavePhoto(inp) 
{
    let user = { name:'john', age:34 };
    let formData = new FormData();
    let photo = inp.files[0];      
         
    formData.append("photo", photo);
    formData.append("user", JSON.stringify(user)); 
    
    const ctrl = new AbortController()    // timeout
    setTimeout(() => ctrl.abort(), 5000);
    
    try {
       let r = await fetch('/upload/image', 
         {method: "POST", body: formData, signal: ctrl.signal}); 
       console.log('HTTP response code:',r.status); 
    } catch(e) {
       console.log('Huston we have problem...:', e);
    }
    
}

<input id="image-file" type="file" onchange="SavePhoto(this)" >
<br><br>
Before selecting the file open chrome console > network tab to see the request details.
<br><br>
<small>Because in this example we send request to https://stacksnippets.net/upload/image the response code will be 404 ofcourse...</small>

<br><br>
(in stack overflow snippets there is problem with error handling, however in <a href="https://jsfiddle.net/Lamik/b8ed5x3y/5/">jsfiddle version</a> for 404 errors 4xx/5xx are <a href="https://stackoverflow.com/a/33355142/860099">not throwing</a> at all but we can read response status which contains code)

Old school approach - xhr

let photo = document.getElementById("image-file").files[0];  // file from input
let req = new XMLHttpRequest();
let formData = new FormData();

formData.append("photo", photo);                                
req.open("POST", '/upload/image');
req.send(formData);

function SavePhoto(e) 
{
    let user = { name:'john', age:34 };
    let xhr = new XMLHttpRequest();
    let formData = new FormData();
    let photo = e.files[0];      
    
    formData.append("user", JSON.stringify(user));   
    formData.append("photo", photo);
    
    xhr.onreadystatechange = state => { console.log(xhr.status); } // err handling
    xhr.timeout = 5000;
    xhr.open("POST", '/upload/image'); 
    xhr.send(formData);
}

<input id="image-file" type="file" onchange="SavePhoto(this)" >
<br><br>
Choose file and open chrome console > network tab to see the request details.
<br><br>
<small>Because in this example we send request to https://stacksnippets.net/upload/image the response code will be 404 ofcourse...</small>

<br><br>
(the stack overflow snippets, has some problem with error handling - the xhr.status is zero (instead of 404) which is similar to situation when we run script from file on <a href="https://stackoverflow.com/a/10173639/860099">local disc</a> - so I provide also js fiddle version which shows proper http error code <a href="https://jsfiddle.net/Lamik/k6jtq3uh/2/">here</a>)

SUMMARY

• In server side you can read original file name (and other info) which is automatically included to request by browser in filename formData parameter.
• You do NOT need to set request header Content-Type to multipart/form-data - this will be set automatically by browser.
• Instead of /upload/image you can use full address like http://.../upload/image.
• If you want to send many files in single request use multiple attribute: <input multiple type=... />, and attach all chosen files to formData in similar way (e.g. photo2=...files[2];... formData.append("photo2", photo2);)
• You can include additional data (json) to request e.g. let user = {name:'john', age:34} in this way: formData.append("user", JSON.stringify(user));
• You can set timeout: for fetch using AbortController, for old approach by xhr.timeout= milisec
• This solutions should work on all major browsers.

When attempting to write to the destination image using any of these answers above and you get the following error:

ValueError: assignment destination is read-only

A quick potential fix is to set the WRITEABLE flag to true.

img.setflags(write=1)

There is one software where you can play with the s3 bucket for performing different kinds of operation.

Software Name: S3 Browser

S3 Browser is a freeware Windows client for Amazon S3 and Amazon CloudFront. Amazon S3 provides a simple web services interface that can be used to store and retrieve any amount of data, at any time, from anywhere on the web. Amazon CloudFront is a content delivery network (CDN). It can be used to deliver your files using a global network of edge locations.

If it's only single time then you can use the command line to perform these operations:

(1) Rename the folder in the same bucket:

s3cmd --access_key={access_key} --secret_key={secret_key} mv s3://bucket/folder1/* s3://bucket/folder2/

(2) Rename the Bucket:

s3cmd --access_key={access_key} --secret_key={secret_key} mv s3://bucket1/folder/* s3://bucket2/folder/

Where,

{access_key} = Your valid access key for s3 client

{secret_key} = Your valid scret key for s3 client

It's working fine without any problem.

Thanks

Nope, this cannot be done since opacity affects the whole element including its content and there's no way to alter this behavior. You can work around this with the two following methods.

Secondary div

Add another div element to the container to hold the background. This is the most cross-browser friendly method and will work even on IE6.

HTML

<div class="myDiv">
    <div class="bg"></div>
    Hi there
</div>

CSS

.myDiv {
    position: relative;
    z-index: 1;
}

.myDiv .bg {
    position: absolute;
    z-index: -1;
    top: 0;
    bottom: 0;
    left: 0;
    right: 0;
    background: url(test.jpg) center center;
    opacity: .4;
    width: 100%;
    height: 100%;
}

See test case on jsFiddle

:before and ::before pseudo-element

Another trick is to use the CSS 2.1 :before or CSS 3 ::before pseudo-elements. :before pseudo-element is supported in IE from version 8, while the ::before pseudo-element is not supported at all. This will hopefully be rectified in version 10.

HTML

<div class="myDiv">
    Hi there
</div>

CSS

.myDiv {
    position: relative;
    z-index: 1;
}

.myDiv:before {
    content: "";
    position: absolute;
    z-index: -1;
    top: 0;
    bottom: 0;
    left: 0;
    right: 0;
    background: url(test.jpg) center center;
    opacity: .4;
}

Additional notes

Due to the behavior of z-index you will have to set a z-index for the container as well as a negative z-index for the background image.

Test cases

See test case on jsFiddle:

• Using CSS 2.1 :before
• Using CSS 3 ::before

Am I missing something to wonder why noone suggests OpenGL? To use it for 2d would be very simple. The OP only wants to color a pixel. It doesn't get simpler than glBegin/glColor/glVertex/glEnd.

Not really, you have to assign a variable. So

    var bar = Stuff.Elements.Foo;
    bar.Name = "Bob Dylan";
    bar.Age = 68;
    bar.Location = "On Tour";
    bar.IsCool = True;

Or in C# 3.0:

    var bar = Stuff.Elements.Foo
    {
        Name = "Bob Dylan",
        Age = 68,
        Location = "On Tour",
        IsCool = True
    };

Add this to your ~/.bashrc, then logout and back in to take effect.

if [ ! -S ~/.ssh/ssh_auth_sock ]; then
  eval `ssh-agent`
  ln -sf "$SSH_AUTH_SOCK" ~/.ssh/ssh_auth_sock
fi
export SSH_AUTH_SOCK=~/.ssh/ssh_auth_sock
ssh-add -l > /dev/null || ssh-add

This should only prompt for a password the first time you login after each reboot. It will keep reusing the same ssh-agent as long as it stays running.

Yes, this is a current issue in Chrome. There is an issue report here.

The fix will appear in 40.x.y.z versions.

Until then? I don't think you can resolve the issue yourself. But you can ignore it. The shown error is only related to the dev tools and does not influence the behavior of your website. If you have any other problems they are not related to this error.

This worked for me.

.alert:not(:first-child){
    margin: 30px;
}

declare @sql varchar(100);

declare @tablename as varchar(100);

select @tablename = 'your_table_name';

create table #tmp 
    (col1 int, col2 int, col3 int);

set @sql = 'select aa, bb, cc from ' + @tablename;

insert into #tmp(col1, col2, col3) exec( @sql );

select * from #tmp;

They are exactly the same character. See: http://en.wikipedia.org/wiki/Dash

Barring browser bugs they will display the same in all cases, so the only difference would be concerning code readability, which would point to —.

Or, if you are using UTF-8 as a charset in your HTML document, you could enter the character directly. That would also display exactly the same.

For a single item enumerable in java it would be Collections.singleton("string");

In c# this is going to be more efficient than a new List:

public class SingleEnumerator<T> : IEnumerable<T>
{
    private readonly T m_Value;

    public SingleEnumerator(T value)
    {
        m_Value = value;
    }

    public IEnumerator<T> GetEnumerator()
    {
        yield return m_Value;
    }

    IEnumerator IEnumerable.GetEnumerator()
    {
        yield return m_Value;
    }
}

but is there a simpler way using the framework?

If you set <TextView> in center in <Linearlayout> then first put android:layout_width="fill_parent" compulsory
No need of using any other gravity

    <LinearLayout
            android:layout_toRightOf="@+id/linear_profile" 
            android:layout_height="wrap_content"
            android:layout_width="fill_parent"
            android:orientation="vertical"
            android:gravity="center_horizontal">
            <TextView 
                android:layout_height="wrap_content"
                android:layout_width="wrap_content"
                android:text="It's.hhhhhhhh...."
                android:textColor="@color/Black"

                />
    </LinearLayout>

CASE course_enrollment_settings.base_price is wrong here, it should be just CASE

SELECT 
CASE 
WHEN course_enrollment_settings.base_price = 0      THEN 1 
WHEN course_enrollment_settings.base_price<101      THEN 2 
WHEN course_enrollment_settings.base_price>100 AND    
                  course_enrollment_settings.base_price<201 THEN 3 
    ELSE 6 
END AS 'calc_base_price', 
course_enrollment_settings.base_price 
FROM 
  course_enrollment_settings 
WHERE course_enrollment_settings.base_price = 0 

Some explanations. Your original query will be executed as :

SELECT 
CASE 0
WHEN 0=0 THEN 1 -- condition evaluates to 1, then 0 (from CASE 0)compares to 1 - false
WHEN 0<1 THEN 2 -- condition evaluates to 1,then 0 (from CASE 0)compares to 1 - false
WHEN 0>100 and 0<201 THEN 3 -- evaluates to 0 ,then 0 (from CASE 0)compares to 0 - true
ELSE 6, ...

it's why you always get 3

Step1: add permission on android manifest.xml

<uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE" />
<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>

Step2: onCreate() method

int permissionCheck = ContextCompat.checkSelfPermission(this, Manifest.permission.WRITE_EXTERNAL_STORAGE);

    if (permissionCheck != PackageManager.PERMISSION_GRANTED) {
        ActivityCompat.requestPermissions(this, new String[]{Manifest.permission.WRITE_EXTERNAL_STORAGE}, MY_PERMISSIONS_REQUEST_READ_MEDIA);
    } else {
        readDataExternal();
    }

Step3: override onRequestPermissionsResult method to get callback

 @Override
public void onRequestPermissionsResult(int requestCode, String permissions[], int[] grantResults) {
    switch (requestCode) {
        case MY_PERMISSIONS_REQUEST_READ_MEDIA:
            if ((grantResults.length > 0) && (grantResults[0] == PackageManager.PERMISSION_GRANTED)) {
                readDataExternal();
            }
            break;

        default:
            break;
    }
}

Note: readDataExternal() is method to get data from external storage.

Thanks.

instanceof can be used to determine the actual type of an object:

class A { }  
class C extends A { } 
class D extends A { } 

public static void testInstance(){
    A c = new C();
    A d = new D();
    Assert.assertTrue(c instanceof A && d instanceof A);
    Assert.assertTrue(c instanceof C && d instanceof D);
    Assert.assertFalse(c instanceof D);
    Assert.assertFalse(d instanceof C);
}

To detect whether two balls collide, just check whether the distance between their centers is less than two times the radius. To do a perfectly elastic collision between the balls, you only need to worry about the component of the velocity that is in the direction of the collision. The other component (tangent to the collision) will stay the same for both balls. You can get the collision components by creating a unit vector pointing in the direction from one ball to the other, then taking the dot product with the velocity vectors of the balls. You can then plug these components into a 1D perfectly elastic collision equation.

Wikipedia has a pretty good summary of the whole process. For balls of any mass, the new velocities can be calculated using the equations (where v1 and v2 are the velocities after the collision, and u1, u2 are from before):

If the balls have the same mass then the velocities are simply switched. Here's some code I wrote which does something similar:

void Simulation::collide(Storage::Iterator a, Storage::Iterator b)
{
    // Check whether there actually was a collision
    if (a == b)
        return;

    Vector collision = a.position() - b.position();
    double distance = collision.length();
    if (distance == 0.0) {              // hack to avoid div by zero
        collision = Vector(1.0, 0.0);
        distance = 1.0;
    }
    if (distance > 1.0)
        return;

    // Get the components of the velocity vectors which are parallel to the collision.
    // The perpendicular component remains the same for both fish
    collision = collision / distance;
    double aci = a.velocity().dot(collision);
    double bci = b.velocity().dot(collision);

    // Solve for the new velocities using the 1-dimensional elastic collision equations.
    // Turns out it's really simple when the masses are the same.
    double acf = bci;
    double bcf = aci;

    // Replace the collision velocity components with the new ones
    a.velocity() += (acf - aci) * collision;
    b.velocity() += (bcf - bci) * collision;
}

As for efficiency, Ryan Fox is right, you should consider dividing up the region into sections, then doing collision detection within each section. Keep in mind that balls can collide with other balls on the boundaries of a section, so this may make your code much more complicated. Efficiency probably won't matter until you have several hundred balls though. For bonus points, you can run each section on a different core, or split up the processing of collisions within each section.

Simple solution

myDivObj = document.getElementById("myDivID")
let myDivObjBgColor = window.getComputedStyle(myDivObj).backgroundColor;

Now the background color is stored in the new variable.

https://jsfiddle.net/7q1dpeo9/1/

Quickest, easiest laziest way to solve the problem:

1. Right-click on the project icon in Solution Explorer and choose "Properties".
2. Go to the "Application" tab and choose an earlier .NET target framework.
3. Save changes.
4. Go to the "Application" tab and choose the initial .NET target framework.
5. Save changes => problem solved!

Others propose that exceptions should not be used because the bad login is to be expected in a normal flow if the user mistypes. I disagree and I don't get the reasoning. Compare it with opening a file.. if the file doesn't exist or is not available for some reason then an exception will be thrown by the framework. Using the logic above this was a mistake by Microsoft. They should have returned an error code. Same for parsing, webrequests, etc., etc..

I don't consider a bad login part of a normal flow, it's exceptional. Normally the user types the correct password, and the file does exist. The exceptional cases are exceptional and it's perfectly fine to use exceptions for those. Complicating your code by propagating return values through n levels up the stack is a waste of energy and will result in messy code. Do the simplest thing that could possibly work. Don't prematurely optimize by using error codes, exceptional stuff by definition rarely happens, and exceptions don't cost anything unless you throw them.

There's some sort of bogus character at the end of that source. Try deleting the last line and adding it back.

I can't figure out exactly what's there, yet ...

edit — I think it's a zero-width space, Unicode 200B. Seems pretty weird and I can't be sure of course that it's not a Stackoverflow artifact, but when I copy/paste that last function including the complete last line into the Chrome console, I get your error.

A notorious source of such characters are websites like jsfiddle. I'm not saying that there's anything wrong with them — it's just a side-effect of something, maybe the use of content-editable input widgets.

If you suspect you've got a case of this ailment, and you're on MacOS or Linux/Unix, the od command line tool can show you (albeit in a fairly ugly way) the numeric values in the characters of the source code file. Some IDEs and editors can show "funny" characters as well. Note that such characters aren't always a problem. It's perfectly OK (in most reasonable programming languages, anyway) for there to be embedded Unicode characters in string constants, for example. The problems start happening when the language parser encounters the characters when it doesn't expect them.

Different approach: Object.create

Per @osahyoun answer, I find the following as a better and efficient way to 'inherit' from Person's prototype object:

function Person(name){
    this.name = name;
    this.type = 'human';
}

Person.prototype.info = function(){
    console.log("Name:", this.name, "Type:", this.type);
}

function Robot(name){
    Person.call(this, name)
    this.type = 'robot';
}

// Set Robot's prototype to Person's prototype by
// creating a new object that inherits from Person.prototype,
// and assigning it to Robot.prototype
Robot.prototype = Object.create(Person.prototype);

// Set constructor back to Robot
Robot.prototype.constructor = Robot;

Create new instances:

var person = new Person("Bob");
var robot = new Robot("Boutros");

person.info(); // Name: Bob Type: human
robot.info();  // Name: Boutros Type: robot

Now, by using Object.create:

Person.prototype.constructor !== Robot

Check also the MDN documentation.

You can also try this if you want to occur for all the queries:

var sequelize = new Sequelize('database', 'username', 'password', {query:{raw:true}})

Visit Setting all queries to raw = true sequelize

In the recent implementation, java.sql.Data is an subclass of java.util.Date, so no converting needed. see here: https://docs.oracle.com/javase/1.5.0/docs/api/java/sql/Date.html

Here’s a jsFiddle demo of my answer. The demo uses CoffeeScript, but you can convert it to plain JavaScript if you need to.

The important part, in JavaScript:

var endIndex = textField.value.length;
if (textField.setSelectionRange) {
   textField.setSelectionRange(endIndex, endIndex);
}

I’m posting this answer because I already wrote it for someone else who had the same question. This answer doesn’t cover as many edge cases as the top answers here, but it works for me, and has a jsFiddle demo you can play with.

Here is the code from the jsFiddle, so this answer is preserved even if the jsFiddle disappears:

moveCursorToEnd = (textField) ->
  endIndex = textField.value.length
  if textField.setSelectionRange
    textField.setSelectionRange(endIndex, endIndex)

jQuery ->
  $('.that-field').on 'click', ->
    moveCursorToEnd(this)

<div class="field">
    <label for="pressure">Blood pressure</label>:
    <input class="that-field" type="text" name="pressure" id="pressure" value="24">
</div>
<p>
    Try clicking in the text field. The cursor will always jump to the end.
</p>

body {
    margin: 1em;
}

.field {
    margin-bottom: 1em;
}

One small addition, all above are the actual reasons why your scroll view might not be scrolling but sometimes mindlessly this could be the reason specially when scrollview is added through code and not IB, you might have added your subviews to the parent view and not to the scrollview this causes the subview to not scroll

and do keep the content size set and bigger than parent view frame (duhh!!)

Actually there is a simpler way to do this, just:

if ($("#input").is(':empty')) {
console.log('empty');
} else {
console.log('not empty');
}

src: https://www.geeksforgeeks.org/how-to-check-an-html-element-is-empty-using-jquery/

There are different ways, depending on where you want to get. XmlDocument is lighter than XDocument, but if you wish to verify minimalistically that a string contains XML, then regular expression is possibly the fastest and lightest choice you can make. For example, I have implemented Smoke Tests with SpecFlow for my API and I wish to test if one of the results in any valid XML - then I would use a regular expression. But if I need to extract values from this XML, then I would parse it with XDocument to do it faster and with less code. Or I would use XmlDocument if I have to work with a big XML (and sometimes I work with XML's that are around 1M lines, even more); then I could even read it line by line. Why? Try opening more than 800MB in private bytes in Visual Studio; even on production you should not have objects bigger than 2GB. You can with a twerk, but you should not. If you would have to parse a document, which contains A LOT of lines, then this documents would probably be CSV.

I have written this comment, because I see a lof of examples with XDocument. XDocument is not good for big documents, or when you only want to verify if there the content is XML valid. If you wish to check if the XML itself makes sense, then you need Schema.

I also downvoted the suggested answer, because I believe it needs the above information inside itself. Imagine I need to verify if 200M of XML, 10 times an hour, is valid XML. XDocument will waste a lof of resources.

prasanna venkatesh also states you could try filling the string to a dataset, it will indicate valid XML as well.

In addition to the above answers,

When setting the option number_sections: true in the YAML header:

number_sections: TRUE

RMarkdown will autonumber your sections.

To reference those autonumbered sections simply put the following in your R Markdown file:

[My Section]

Where My Section is the name of the section

This seems to work regardless of the section level:

# My section

## My section

### My section

You're initialising your SSLContext with a null KeyManager array.

The key manager is what handles the server certificate (on the server side), and this is what you're probably aiming to set when using javax.net.ssl.keyStore.

However, as described in the JSSE Reference Guide, using null for the first parameter doesn't do what you seem to think it does:

If the KeyManager[] parameter is null, then an empty KeyManager will be defined for this context. If the TrustManager[] parameter is null, the installed security providers will be searched for the highest-priority implementation of the TrustManagerFactory, from which an appropriate TrustManager will be obtained. Likewise, the SecureRandom parameter may be null, in which case a default implementation will be used.

An empty KeyManager doesn't contain any RSA or DSA certificates. Therefore, all the default cipher suites that would rely on such a certificate are disabled. This is why you get all these "Ignoring unavailable cipher suite" messages, which ultimately result in a "no cipher suites in common" message.

If you want your keystore to be used as a keystore, you'll need to load it and initialise a KeyManagerFactory with it:

    KeyStore ks = KeyStore.getInstance("JKS");
    InputStream ksIs = new FileInputStream("...");
    try {
        ks.load(ksIs, "password".toCharArray());
    } finally {
        if (ksIs != null) {
            ksIs.close();
        }
    }

    KeyManagerFactory kmf = KeyManagerFactory.getInstance(KeyManagerFactory
            .getDefaultAlgorithm());
    kmf.init(ks, "keypassword".toCharArray());

The use kmf.getKeyManagers() as the first parameter to SSLContext.init().

For the other two parameters, since you're visibly not requesting client-certificate authentication, you should leave the trust manager to its default value (null) instead of copying/pasting a trust manager that's a potential cause of vulnerability, and you can also use the default null SecureRandom.

If you just want to use AWT, then use Graphics.getFontMetrics (optionally specifying the font, for a non-default one) to get a FontMetrics and then FontMetrics.stringWidth to find the width for the specified string.

For example, if you have a Graphics variable called g, you'd use:

int width = g.getFontMetrics().stringWidth(text);

For other toolkits, you'll need to give us more information - it's always going to be toolkit-dependent.

sudo pip-2.7 install mechanize

This is my approach:

1. drop the sequence
2. recreate it

Example:

--Drop sequence

DROP SEQUENCE MY_SEQ;

-- Create sequence 

create sequence MY_SEQ
minvalue 1
maxvalue 999999999999999999999
start with 1
increment by 1
cache 20;

Method 1:

list(set([val for idx, val in enumerate(input_list) if val in input_list[idx+1:]]))

Explanation: [val for idx, val in enumerate(input_list) if val in input_list[idx+1:]] is a list comprehension, that returns an element, if the same element is present from it's current position, in list, the index.

Example: input_list = [42,31,42,31,3,31,31,5,6,6,6,6,6,7,42]

starting with the first element in list, 42, with index 0, it checks if the element 42, is present in input_list[1:] (i.e., from index 1 till end of list) Because 42 is present in input_list[1:], it will return 42.

Then it goes to the next element 31, with index 1, and checks if element 31 is present in the input_list[2:] (i.e., from index 2 till end of list), Because 31 is present in input_list[2:], it will return 31.

similarly it goes through all the elements in the list, and will return only the repeated/duplicate elements into a list.

Then because we have duplicates, in a list, we need to pick one of each duplicate, i.e. remove duplicate among duplicates, and to do so, we do call a python built-in named set(), and it removes the duplicates,

Then we are left with a set, but not a list, and hence to convert from a set to list, we use, typecasting, list(), and that converts the set of elements to a list.

Method 2:

def dupes(ilist):
    temp_list = [] # initially, empty temporary list
    dupe_list = [] # initially, empty duplicate list
    for each in ilist:
        if each in temp_list: # Found a Duplicate element
            if not each in dupe_list: # Avoid duplicate elements in dupe_list
                dupe_list.append(each) # Add duplicate element to dupe_list
        else: 
            temp_list.append(each) # Add a new (non-duplicate) to temp_list

    return dupe_list

Explanation: Here We create two empty lists, to start with. Then keep traversing through all the elements of the list, to see if it exists in temp_list (initially empty). If it is not there in the temp_list, then we add it to the temp_list, using append method.

If it already exists in temp_list, it means, that the current element of the list is a duplicate, and hence we need to add it to dupe_list using append method.

To check that the file you're trying to open actually exists, you can change directories in terminal using cd. To change to ~/Desktop/sass/css: cd ~/Desktop/sass/css. To see what files are in the directory: ls.

If you want information about either of those commands, use the man page: man cd or man ls, for example.

Google for "basic unix command line commands" or similar; that will give you numerous examples of moving around, viewing files, etc in the command line.

On Mac OS X, you can also use open to open a finder window: open . will open the current directory in finder. (open ~/Desktop/sass/css will open the ~/Desktop/sass/css).

Exchanges will usually publish an up-to-date list of securities on their web pages. For example, these pages offer CSV downloads:

• http://www.nasdaq.com/screening/companies-by-industry.aspx?exchange=NASDAQ&render=download
• http://www.nasdaq.com/screening/companies-by-industry.aspx?exchange=NYSE&render=download
• http://www.asx.com.au/asx/research/ASXListedCompanies.csv

NASDAQ Updated their site, so you will have to modify the URLS:

NASDAQ

• https://old.nasdaq.com/screening/companies-by-name.aspx?letter=0&exchange=nasdaq&render=download

AMEX

• https://old.nasdaq.com/screening/companies-by-name.aspx?letter=0&exchange=amex&render=download

NYSE

• https://old.nasdaq.com/screening/companies-by-name.aspx?letter=0&exchange=nyse&render=download

Depending on your requirement, you could create the map of these URLs by exchange in your own code.

I have resolved this problem to add some change like git add -A and git commit again.

strtol() is your friend here. The third parameter is the numerical base that you are converting.

Example:

#include <stdio.h>      /* printf */
#include <stdlib.h>     /* strtol */

int main(int argc, char **argv)
{
    long int num  = 0;
    long int num2 =0;
    char * str. = "f00d";
    char * str2 = "0xf00d";

    num = strtol( str, 0, 16);  //converts hexadecimal string to long.
    num2 = strtol( str2, 0, 0); //conversion depends on the string passed in, 0x... Is hex, 0... Is octal and everything else is decimal.

    printf( "%ld\n", num);
    printf( "%ld\n", num);
}

As was in my case if your sql is generated by concatenating or uses converts then sql at execute need to be prefixed with letter N as below

e.g.

Exec N'Select bla..' 

the N defines string literal is unicode.

I hit this issue. This architecture (from Lain's answer) worked for me. Here is the solution in Python.

• mixed
  • alternative
    • text
    • related
      • html
      • inline image
      • inline image
  • attachment
  • attachment

Here is the main email creation function:

def create_message_with_attachment(
    sender, to, subject, msgHtml, msgPlain, attachmentFile):
    """Create a message for an email.

    Args:
      sender: Email address of the sender.
      to: Email address of the receiver.
      subject: The subject of the email message.
      message_text: The text of the email message.
      file: The path to the file to be attached.

    Returns:
      An object containing a base64url encoded email object.
    """
    message = MIMEMultipart('mixed')
    message['to'] = to
    message['from'] = sender
    message['subject'] = subject

    message_alternative = MIMEMultipart('alternative')
    message_related = MIMEMultipart('related')

    message_related.attach(MIMEText(msgHtml, 'html'))
    message_alternative.attach(MIMEText(msgPlain, 'plain'))
    message_alternative.attach(message_related)

    message.attach(message_alternative)

    print "create_message_with_attachment: file:", attachmentFile
    content_type, encoding = mimetypes.guess_type(attachmentFile)

    if content_type is None or encoding is not None:
        content_type = 'application/octet-stream'
    main_type, sub_type = content_type.split('/', 1)
    if main_type == 'text':
        fp = open(attachmentFile, 'rb')
        msg = MIMEText(fp.read(), _subtype=sub_type)
        fp.close()
    elif main_type == 'image':
        fp = open(attachmentFile, 'rb')
        msg = MIMEImage(fp.read(), _subtype=sub_type)
        fp.close()
    elif main_type == 'audio':
        fp = open(attachmentFile, 'rb')
        msg = MIMEAudio(fp.read(), _subtype=sub_type)
        fp.close()
    else:
        fp = open(attachmentFile, 'rb')
        msg = MIMEBase(main_type, sub_type)
        msg.set_payload(fp.read())
        fp.close()
    filename = os.path.basename(attachmentFile)
    msg.add_header('Content-Disposition', 'attachment', filename=filename)
    message.attach(msg)

    return {'raw': base64.urlsafe_b64encode(message.as_string())}

Here is the full code for sending an email containing html/text/attachment:

import httplib2
import os
import oauth2client
from oauth2client import client, tools
import base64
from email.mime.multipart import MIMEMultipart
from email.mime.text import MIMEText
from apiclient import errors, discovery
import mimetypes
from email.mime.image import MIMEImage
from email.mime.audio import MIMEAudio
from email.mime.base import MIMEBase

SCOPES = 'https://www.googleapis.com/auth/gmail.send'
CLIENT_SECRET_FILE1 = 'client_secret.json'
location = os.path.realpath(
    os.path.join(os.getcwd(), os.path.dirname(__file__)))
CLIENT_SECRET_FILE = os.path.join(location, CLIENT_SECRET_FILE1)
APPLICATION_NAME = 'Gmail API Python Send Email'

def get_credentials():
    home_dir = os.path.expanduser('~')
    credential_dir = os.path.join(home_dir, '.credentials')
    if not os.path.exists(credential_dir):
        os.makedirs(credential_dir)
    credential_path = os.path.join(credential_dir,
                                   'gmail-python-email-send.json')
    store = oauth2client.file.Storage(credential_path)
    credentials = store.get()
    if not credentials or credentials.invalid:
        flow = client.flow_from_clientsecrets(CLIENT_SECRET_FILE, SCOPES)
        flow.user_agent = APPLICATION_NAME
        credentials = tools.run_flow(flow, store)
        print 'Storing credentials to ' + credential_path
    return credentials

def SendMessageWithAttachment(sender, to, subject, msgHtml, msgPlain, attachmentFile):
    credentials = get_credentials()
    http = credentials.authorize(httplib2.Http())
    service = discovery.build('gmail', 'v1', http=http)
    message1 = create_message_with_attachment(sender, to, subject, msgHtml, msgPlain, attachmentFile)
    SendMessageInternal(service, "me", message1)

def SendMessageInternal(service, user_id, message):
    try:
        message = (service.users().messages().send(userId=user_id, body=message).execute())
        print 'Message Id: %s' % message['id']
        return message
    except errors.HttpError, error:
        print 'An error occurred: %s' % error
        return "error"

def create_message_with_attachment(
    sender, to, subject, msgHtml, msgPlain, attachmentFile):
    """Create a message for an email.

    Args:
      sender: Email address of the sender.
      to: Email address of the receiver.
      subject: The subject of the email message.
      message_text: The text of the email message.
      file: The path to the file to be attached.

    Returns:
      An object containing a base64url encoded email object.
    """
    message = MIMEMultipart('mixed')
    message['to'] = to
    message['from'] = sender
    message['subject'] = subject

    message_alternative = MIMEMultipart('alternative')
    message_related = MIMEMultipart('related')

    message_related.attach(MIMEText(msgHtml, 'html'))
    message_alternative.attach(MIMEText(msgPlain, 'plain'))
    message_alternative.attach(message_related)

    message.attach(message_alternative)

    print "create_message_with_attachment: file:", attachmentFile
    content_type, encoding = mimetypes.guess_type(attachmentFile)

    if content_type is None or encoding is not None:
        content_type = 'application/octet-stream'
    main_type, sub_type = content_type.split('/', 1)
    if main_type == 'text':
        fp = open(attachmentFile, 'rb')
        msg = MIMEText(fp.read(), _subtype=sub_type)
        fp.close()
    elif main_type == 'image':
        fp = open(attachmentFile, 'rb')
        msg = MIMEImage(fp.read(), _subtype=sub_type)
        fp.close()
    elif main_type == 'audio':
        fp = open(attachmentFile, 'rb')
        msg = MIMEAudio(fp.read(), _subtype=sub_type)
        fp.close()
    else:
        fp = open(attachmentFile, 'rb')
        msg = MIMEBase(main_type, sub_type)
        msg.set_payload(fp.read())
        fp.close()
    filename = os.path.basename(attachmentFile)
    msg.add_header('Content-Disposition', 'attachment', filename=filename)
    message.attach(msg)

    return {'raw': base64.urlsafe_b64encode(message.as_string())}


def main():
    to = "[email protected]"
    sender = "[email protected]"
    subject = "subject"
    msgHtml = "Hi<br/>Html Email"
    msgPlain = "Hi\nPlain Email"
    attachment = "/path/to/file.pdf"
    SendMessageWithAttachment(sender, to, subject, msgHtml, msgPlain, attachment)

if __name__ == '__main__':
    main()

If you want to get the full path of the directory of the current rb file:

File.expand_path('../', __FILE__)

Use a Counter

>>> from collections import Counter
>>> c = Counter('gallahad')
>>> print c
Counter({'a': 3, 'l': 2, 'h': 1, 'g': 1, 'd': 1})
>>> c['a']    # count of "a" characters
3

Counter is only available in Python 2.7+. A solution that should work on Python 2.5 would utilize defaultdict

>>> from collections import defaultdict
>>> d = defaultdict(int)
>>> for c in s:
...     d[c] = d[c] + 1
... 
>>> print dict(d)
{'a': 3, 'h': 1, 'l': 2, 'g': 1, 'd': 1}

All tables should have a primary key (consisting of a single or multiple columns), duplicate rows doesn't make sense in a relational database. You can limit the number of delete rows using LIMIT though:

DELETE FROM orders WHERE id_users = 1 AND id_product = 2 LIMIT 1

But that just solves your current issue, you should definitely work on the bigger issue by defining primary keys.

What do you mean by ‘hang state’? Typically, a process that is unresponsive and using 100% of a CPU is stuck in an endless loop. But there's no way to determine whether that has happened or whether the process might not eventually reach a loop exit state and carry on.

Desktop hang detectors just work by sending a message to the application's event loop and seeing if there's any response. If there's not for a certain amount of time they decide the app has ‘hung’... but it's entirely possible it was just doing something complicated and will come back to life in a moment once it's done. Anyhow, that's not something you can use for any arbitrary process.

You can use valgrind to debug it.

#include<stdio.h>
#include<stdlib.h>

int main()
{
 char *x = malloc(100);
 free(x);
 free(x);
 return 0;
}

[sand@PS-CNTOS-64-S11 testbox]$ vim t1.c
[sand@PS-CNTOS-64-S11 testbox]$ cc -g t1.c -o t1
[sand@PS-CNTOS-64-S11 testbox]$ ./t1
*** glibc detected *** ./t1: double free or corruption (top): 0x00000000058f7010 ***
======= Backtrace: =========
/lib64/libc.so.6[0x3a3127245f]
/lib64/libc.so.6(cfree+0x4b)[0x3a312728bb]
./t1[0x400500]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x3a3121d994]
./t1[0x400429]
======= Memory map: ========
00400000-00401000 r-xp 00000000 68:02 30246184                           /home/sand/testbox/t1
00600000-00601000 rw-p 00000000 68:02 30246184                           /home/sand/testbox/t1
058f7000-05918000 rw-p 058f7000 00:00 0                                  [heap]
3a30e00000-3a30e1c000 r-xp 00000000 68:03 5308733                        /lib64/ld-2.5.so
3a3101b000-3a3101c000 r--p 0001b000 68:03 5308733                        /lib64/ld-2.5.so
3a3101c000-3a3101d000 rw-p 0001c000 68:03 5308733                        /lib64/ld-2.5.so
3a31200000-3a3134e000 r-xp 00000000 68:03 5310248                        /lib64/libc-2.5.so
3a3134e000-3a3154e000 ---p 0014e000 68:03 5310248                        /lib64/libc-2.5.so
3a3154e000-3a31552000 r--p 0014e000 68:03 5310248                        /lib64/libc-2.5.so
3a31552000-3a31553000 rw-p 00152000 68:03 5310248                        /lib64/libc-2.5.so
3a31553000-3a31558000 rw-p 3a31553000 00:00 0
3a41c00000-3a41c0d000 r-xp 00000000 68:03 5310264                        /lib64/libgcc_s-4.1.2-20080825.so.1
3a41c0d000-3a41e0d000 ---p 0000d000 68:03 5310264                        /lib64/libgcc_s-4.1.2-20080825.so.1
3a41e0d000-3a41e0e000 rw-p 0000d000 68:03 5310264                        /lib64/libgcc_s-4.1.2-20080825.so.1
2b1912300000-2b1912302000 rw-p 2b1912300000 00:00 0
2b191231c000-2b191231d000 rw-p 2b191231c000 00:00 0
7ffffe214000-7ffffe229000 rw-p 7ffffffe9000 00:00 0                      [stack]
7ffffe2b0000-7ffffe2b4000 r-xp 7ffffe2b0000 00:00 0                      [vdso]
ffffffffff600000-ffffffffffe00000 ---p 00000000 00:00 0                  [vsyscall]
Aborted
[sand@PS-CNTOS-64-S11 testbox]$


[sand@PS-CNTOS-64-S11 testbox]$ vim t1.c
[sand@PS-CNTOS-64-S11 testbox]$ cc -g t1.c -o t1
[sand@PS-CNTOS-64-S11 testbox]$ valgrind --tool=memcheck ./t1
==20859== Memcheck, a memory error detector
==20859== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al.
==20859== Using Valgrind-3.5.0 and LibVEX; rerun with -h for copyright info
==20859== Command: ./t1
==20859==
==20859== Invalid free() / delete / delete[]
==20859==    at 0x4A05A31: free (vg_replace_malloc.c:325)
==20859==    by 0x4004FF: main (t1.c:8)
==20859==  Address 0x4c26040 is 0 bytes inside a block of size 100 free'd
==20859==    at 0x4A05A31: free (vg_replace_malloc.c:325)
==20859==    by 0x4004F6: main (t1.c:7)
==20859==
==20859==
==20859== HEAP SUMMARY:
==20859==     in use at exit: 0 bytes in 0 blocks
==20859==   total heap usage: 1 allocs, 2 frees, 100 bytes allocated
==20859==
==20859== All heap blocks were freed -- no leaks are possible
==20859==
==20859== For counts of detected and suppressed errors, rerun with: -v
==20859== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 4 from 4)
[sand@PS-CNTOS-64-S11 testbox]$


[sand@PS-CNTOS-64-S11 testbox]$ valgrind --tool=memcheck --leak-check=full ./t1
==20899== Memcheck, a memory error detector
==20899== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al.
==20899== Using Valgrind-3.5.0 and LibVEX; rerun with -h for copyright info
==20899== Command: ./t1
==20899==
==20899== Invalid free() / delete / delete[]
==20899==    at 0x4A05A31: free (vg_replace_malloc.c:325)
==20899==    by 0x4004FF: main (t1.c:8)
==20899==  Address 0x4c26040 is 0 bytes inside a block of size 100 free'd
==20899==    at 0x4A05A31: free (vg_replace_malloc.c:325)
==20899==    by 0x4004F6: main (t1.c:7)
==20899==
==20899==
==20899== HEAP SUMMARY:
==20899==     in use at exit: 0 bytes in 0 blocks
==20899==   total heap usage: 1 allocs, 2 frees, 100 bytes allocated
==20899==
==20899== All heap blocks were freed -- no leaks are possible
==20899==
==20899== For counts of detected and suppressed errors, rerun with: -v
==20899== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 4 from 4)
[sand@PS-CNTOS-64-S11 testbox]$

One possible fix:

#include<stdio.h>
#include<stdlib.h>

int main()
{
 char *x = malloc(100);
 free(x);
 x=NULL;
 free(x);
 return 0;
}

[sand@PS-CNTOS-64-S11 testbox]$ vim t1.c
[sand@PS-CNTOS-64-S11 testbox]$ cc -g t1.c -o t1
[sand@PS-CNTOS-64-S11 testbox]$ ./t1
[sand@PS-CNTOS-64-S11 testbox]$

[sand@PS-CNTOS-64-S11 testbox]$ valgrind --tool=memcheck --leak-check=full ./t1
==20958== Memcheck, a memory error detector
==20958== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al.
==20958== Using Valgrind-3.5.0 and LibVEX; rerun with -h for copyright info
==20958== Command: ./t1
==20958==
==20958==
==20958== HEAP SUMMARY:
==20958==     in use at exit: 0 bytes in 0 blocks
==20958==   total heap usage: 1 allocs, 1 frees, 100 bytes allocated
==20958==
==20958== All heap blocks were freed -- no leaks are possible
==20958==
==20958== For counts of detected and suppressed errors, rerun with: -v
==20958== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 4 from 4)
[sand@PS-CNTOS-64-S11 testbox]$

Check out the blog on using Valgrind Link

For me, I managed to make it work that way. I deployed the automatic click in 5000 milliseconds and then closed the loop after 1000 milliseconds. Then there was only 1 automatic click.

<script> var myVar = setInterval(function ({document.getElementById("test").click();}, 500)); setInterval(function () {clearInterval(myVar)}, 1000));</script>

Objective-C doesn't have named parameters, so everything on the left side of a colon is part of the method name. For example,

getBusStops: forTime:

is the name of the method. The name is broken up so it can be more descriptive. You could simply name your method

getBusStops: :

but that doesn't tell you much about the second parameter.

Here's a link to Sun's recommendations for Java. Not that you have to use these or even that their library code follows all of them, but it's a good start if you're going from scratch. Tool like Eclipse have built in formatters and cleanup tools that can help you conform to these conventions (or others that you define).

For me, '_' are too hard to type :)

When you #include a header, it's exactly as if you put the code into the source file itself. In both cases the varGlobal variable is defined in the source so it will work no matter how it's declared.

Also as pointed out in the comments, C++ variables at file scope are not static in scope even though they will be assigned to static storage. If the variable were a class member for example, it would need to be accessible to other compilation units in the program by default and non-class members are no different.

you can try this simple code, Collections.swap(list, i, j) is what you looking for.

    List<String> list = new ArrayList<String>();
    list.add("1");
    list.add("2");
    list.add("3");
    list.add("4");

    String toMoveUp = "3";
    while (list.indexOf(toMoveUp) != 0) {
        int i = list.indexOf(toMoveUp);
        Collections.swap(list, i, i - 1);
    }

    System.out.println(list);

This is pretty simple here is an example

Add your command code here like:

if (cmd === `!dm`) {
 let dUser =
  message.guild.member(message.mentions.users.first()) ||
  message.guild.members.get(args[0]);
 if (!dUser) return message.channel.send("Can't find user!");
 if (!message.member.hasPermission('ADMINISTRATOR'))
  return message.reply("You can't you that command!");
 let dMessage = args.join(' ').slice(22);
 if (dMessage.length < 1) return message.reply('You must supply a message!');

 dUser.send(`${dUser} A moderator from WP Coding Club sent you: ${dMessage}`);

 message.author.send(
  `${message.author} You have sent your message to ${dUser}`
 );
}

Manual cleanup:

You can KILL the processid.

mysql> show full processlist;
+---------+------------+-------------------+------+---------+-------+-------+-----------------------+
| Id      | User       | Host              | db   | Command | Time  | State | Info                  |
+---------+------------+-------------------+------+---------+-------+-------+-----------------------+
| 1193777 | TestUser12 | 192.168.1.11:3775 | www  | Sleep   | 25946 |       | NULL                  |
+---------+------------+-------------------+------+---------+-------+-------+-----------------------+

mysql> kill 1193777;

But:

• the php application might report errors (or the webserver, check the error logs)
• don't fix what is not broken - if you're not short on connections, just leave them be.

Automatic cleaner service ;)

Or you configure your mysql-server by setting a shorter timeout on wait_timeout and interactive_timeout

mysql> show variables like "%timeout%";
+--------------------------+-------+
| Variable_name            | Value |
+--------------------------+-------+
| connect_timeout          | 5     |
| delayed_insert_timeout   | 300   |
| innodb_lock_wait_timeout | 50    |
| interactive_timeout      | 28800 |
| net_read_timeout         | 30    |
| net_write_timeout        | 60    |
| slave_net_timeout        | 3600  |
| table_lock_wait_timeout  | 50    |
| wait_timeout             | 28800 |
+--------------------------+-------+
9 rows in set (0.00 sec)

Set with:

set global wait_timeout=3;
set global interactive_timeout=3;

(and also set in your configuration file, for when your server restarts)

But you're treating the symptoms instead of the underlying cause - why are the connections open? If the PHP script finished, shouldn't they close? Make sure your webserver is not using connection pooling...

what about using aggregate framework:

db.collection.aggregate({ $group : { _id: null, max: { $max : "$age" }}});

When you use df.apply(), each row of your DataFrame will be passed to your lambda function as a pandas Series. The frame's columns will then be the index of the series and you can access values using series[label].

So this should work:

df['D'] = (df.apply(lambda x: myfunc(x[colNames[0]], x[colNames[1]]), axis=1)) 

If, for whatever reason, you don't want to use a BigDecimal you can cast your double to an int to truncate it.

If you want to truncate to the Ones place:

• simply cast to int

To the Tenths place:

• multiply by ten
• cast to int
• cast back to double
• and divide by ten.

Hundreths place

• multiply and divide by 100 etc.

Example:

static double truncateTo( double unroundedNumber, int decimalPlaces ){
    int truncatedNumberInt = (int)( unroundedNumber * Math.pow( 10, decimalPlaces ) );
    double truncatedNumber = (double)( truncatedNumberInt / Math.pow( 10, decimalPlaces ) );
    return truncatedNumber;
}

In this example, decimalPlaces would be the number of places PAST the ones place you wish to go, so 1 would round to the tenths place, 2 to the hundredths, and so on (0 rounds to the ones place, and negative one to the tens, etc.)

I had this problem when I had already installed ImageMagick with macports. I ran

    port contents ImageMagick | grep config

To find where the config file had been stored and then ran

    PATH=(insert your path here):${PATH} bundle

to install the gem using bundler. From now on, if you run a command that needs to reference ImageMagick, you can prefix it with that command. For example I had a migration that referenced it, so I ran

    PATH=/opt/local/bin/:${PATH} rake db:migrate

opt/local/bin/ is the path where my config file was stored.

For those who are looking for PHP ( >5.3.5 ) PDO statement, we can set charset as per below:

$dbh = new PDO('mysql:host=localhost;dbname=testdb;charset=utf8', 'username', 'password');

finally work for me !

In Eclipse, Window > Preferences > General > Network Connections,
set Active Provider to Native
add to eclipse.ini :

-Djava.net.useSystemProxies=true
-Dhttp.proxyPort=8080
-Dhttp.proxyHost=myproxy
-Dhttp.proxyUser=mydomain\myusername
-Dhttp.proxyPassword=mypassword
-Dhttp.nonProxyHosts=localhost|127.0.0.1|192.168.*|10.*
-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient4

When I look at the solutions, it seems the problem is always something that prevents the spring library to be loaded. It could be a dependency problem or a deployment problem.

In my case, it was the maven repository that somehow got corrupt. What solved the problem was to remove the folder `C:\Users(my name).m2\repository' and rebuild.

I have been experiencing this problem for the last week now as I've been trying to send DELETE requests to my PHP server through AJAX. I recently upgraded my hosting plan where I now have an SSL Certificate on my host which stores the PHP and JS files. Since adding an SSL Certificate I no longer experience this issue. Hoping this helps with this strange error.

To convert UTC time to Local you have to use moment.local().

For more info see docs

Example:

var date = moment.utc().format('YYYY-MM-DD HH:mm:ss');

console.log(date); // 2015-09-13 03:39:27

var stillUtc = moment.utc(date).toDate();
var local = moment(stillUtc).local().format('YYYY-MM-DD HH:mm:ss');

console.log(local); // 2015-09-13 09:39:27

Demo:

var date = moment.utc().format();_x000D_
console.log(date, "- now in UTC"); _x000D_
_x000D_
var local = moment.utc(date).local().format();_x000D_
console.log(local, "- UTC now to local"); 

<script src="https://cdnjs.cloudflare.com/ajax/libs/moment.js/2.22.2/moment.min.js"></script>

The two code segments work the same. However, unsigned int" route is correct. Using unsigned int types will work better with the vector in the instance you used it. Calling the size() member function on a vector returns an unsigned integer value, so you want to be comparing the variable "i" to a value of its own type.

Also, if you are still a little uneasy about how "unsigned int" looks in your code, try "uint". This is basically a shortened version of "unsigned int" and it works exactly the same. You also don't need to include other headers to use it.

Do you have to use a HashMap? If you only need the Map Interface use a TreeMap

If you want to sort by comparing values in the HashMap. You have to write code to do this, if you want to do it once you can sort the values of your HashMap:

Map<String, Person> people = new HashMap<>();
Person jim = new Person("Jim", 25);
Person scott = new Person("Scott", 28);
Person anna = new Person("Anna", 23);

people.put(jim.getName(), jim);
people.put(scott.getName(), scott);
people.put(anna.getName(), anna);

// not yet sorted
List<Person> peopleByAge = new ArrayList<>(people.values());

Collections.sort(peopleByAge, Comparator.comparing(Person::getAge));

for (Person p : peopleByAge) {
    System.out.println(p.getName() + "\t" + p.getAge());
}

If you want to access this sorted list often, then you could insert your elements into a HashMap<TreeSet<Person>>, though the semantics of sets and lists are a bit different.

Modern C, aka C99, has variable length arrays, VLA. Unfortunately, not all compilers support this but if yours does this would be an alternative.

Using MongoDB 4.0 and newer

The $toDate operator will convert the value to a date. If the value cannot be converted to a date, $toDate errors. If the value is null or missing, $toDate returns null:

You can use it within an aggregate pipeline as follows:

db.collection.aggregate([
    { "$addFields": {
        "created_at": {
            "$toDate": "$created_at"
        }
    } }
])

The above is equivalent to using the $convert operator as follows:

db.collection.aggregate([
    { "$addFields": {
        "created_at": { 
            "$convert": { 
                "input": "$created_at", 
                "to": "date" 
            } 
        }
    } }
])

Using MongoDB 3.6 and newer

You cab also use the $dateFromString operator which converts the date/time string to a date object and has options for specifying the date format as well as the timezone:

db.collection.aggregate([
    { "$addFields": {
        "created_at": { 
            "$dateFromString": { 
                "dateString": "$created_at",
                "format": "%m-%d-%Y" /* <-- option available only in version 4.0. and newer */
            } 
        }
    } }
])

Using MongoDB versions >= 2.6 and < 3.2

If MongoDB version does not have the native operators that do the conversion, you would need to manually iterate the cursor returned by the find() method by either using the forEach() method or the cursor method next() to access the documents. Withing the loop, convert the field to an ISODate object and then update the field using the $set operator, as in the following example where the field is called created_at and currently holds the date in string format:

var cursor = db.collection.find({"created_at": {"$exists": true, "$type": 2 }}); 
while (cursor.hasNext()) { 
    var doc = cursor.next(); 
    db.collection.update(
        {"_id" : doc._id}, 
        {"$set" : {"created_at" : new ISODate(doc.created_at)}}
    ) 
};

For improved performance especially when dealing with large collections, take advantage of using the Bulk API for bulk updates as you will be sending the operations to the server in batches of say 1000 which gives you a better performance as you are not sending every request to the server, just once in every 1000 requests.

The following demonstrates this approach, the first example uses the Bulk API available in MongoDB versions >= 2.6 and < 3.2. It updates all the documents in the collection by changing the created_at fields to date fields:

var bulk = db.collection.initializeUnorderedBulkOp(),
    counter = 0;

db.collection.find({"created_at": {"$exists": true, "$type": 2 }}).forEach(function (doc) {
    var newDate = new ISODate(doc.created_at);
    bulk.find({ "_id": doc._id }).updateOne({ 
        "$set": { "created_at": newDate}
    });

    counter++;
    if (counter % 1000 == 0) {
        bulk.execute(); // Execute per 1000 operations and re-initialize every 1000 update statements
        bulk = db.collection.initializeUnorderedBulkOp();
    }
})
// Clean up remaining operations in queue
if (counter % 1000 != 0) { bulk.execute(); }

Using MongoDB 3.2

The next example applies to the new MongoDB version 3.2 which has since deprecated the Bulk API and provided a newer set of apis using bulkWrite():

var bulkOps = [],
    cursor = db.collection.find({"created_at": {"$exists": true, "$type": 2 }});

cursor.forEach(function (doc) { 
    var newDate = new ISODate(doc.created_at);
    bulkOps.push(         
        { 
            "updateOne": { 
                "filter": { "_id": doc._id } ,              
                "update": { "$set": { "created_at": newDate } } 
            }         
        }           
    );

    if (bulkOps.length === 500) {
        db.collection.bulkWrite(bulkOps);
        bulkOps = [];
    }     
});

if (bulkOps.length > 0) db.collection.bulkWrite(bulkOps);

You could use :

int a = 12;
if (a>0 || a<0){
cout << "Your text"<<endl;
}

I'm pretty sure it works.

There are some straightforward examples already, but I notice from how you've worded your question that you probably come from a PHP background, and you're expecting JavaScript to work the same way -- it does not. A PHP array is very different from a JavaScript Array.

In PHP, an associative array can do most of what a numerically-indexed array can (the array_* functions work, you can count() it, etc.) You simply create an array and start assigning to string-indexes instead of numeric.

In JavaScript, everything is an object (except for primitives: string, numeric, boolean), and arrays are a certain implementation that lets you have numeric indexes. Anything pushed to an array will effect its length, and can be iterated over using Array methods (map, forEach, reduce, filter, find, etc.) However, because everything is an object, you're always free to simply assign properties, because that's something you do to any object. Square-bracket notation is simply another way to access a property, so in your case:

array['Main'] = 'Main Page';

is actually equivalent to:

array.Main = 'Main Page';

From your description, my guess is that you want an 'associative array', but for JavaScript, this is a simple case of using an object as a hashmap. Also, I know it's an example, but avoid non-meaningful names that only describe the variable type (e.g. array), and name based on what it should contain (e.g. pages). Simple objects don't have many good direct ways to iterate, so often we'll turn then into arrays first using Object methods (Object.keys in this case -- there's also entries and values being added to some browsers right now) which we can loop.

// assigning values to corresponding keys
const pages = {
  Main: 'Main page',
  Guide: 'Guide page',
  Articles: 'Articles page',
  Forum: 'Forum board',
};

Object.keys(pages).forEach((page) => console.log(page));

Instead of foreach(), use a for() loop with a numeric index.

head -1000 input > output && sed -i '1,+999d' input

For example:

$ cat input 
1
2
3
4
5
6
$ head -3 input > output && sed -i '1,+2d' input
$ cat input 
4
5
6
$ cat output 
1
2
3

Short brief answer.

A port can be described as an internal address within a host that identifies a program or process.

A socket can be described as a programming interface allowing a program to communicate with other programs or processes, on the internet, or locally.

Django provides access to certain, frequently-used settings constants to the template such as settings.MEDIA_URL and some of the language settings if you use django's built in generic views or pass in a context instance keyword argument in the render_to_response shortcut function. Here's an example of each case:

from django.shortcuts import render_to_response
from django.template import RequestContext
from django.views.generic.simple import direct_to_template

def my_generic_view(request, template='my_template.html'):
    return direct_to_template(request, template)

def more_custom_view(request, template='my_template.html'):
    return render_to_response(template, {}, context_instance=RequestContext(request))

These views will both have several frequently used settings like settings.MEDIA_URL available to the template as {{ MEDIA_URL }}, etc.

If you're looking for access to other constants in the settings, then simply unpack the constants you want and add them to the context dictionary you're using in your view function, like so:

from django.conf import settings
from django.shortcuts import render_to_response

def my_view_function(request, template='my_template.html'):
    context = {'favorite_color': settings.FAVORITE_COLOR}
    return render_to_response(template, context)

Now you can access settings.FAVORITE_COLOR on your template as {{ favorite_color }}.

Google recently added this comprehensive list of reference devices and resolutions, including new device types such as wearables and laptops:

https://design.google.com/devices/

This means your array is missing the key you're looking for. I handle this with a function which either returns the value if it exists or it returns a default value instead.

def keyCheck(key, arr, default):
    if key in arr.keys():
        return arr[key]
    else:
        return default


myarray = {'key1':1, 'key2':2}

print keyCheck('key1', myarray, '#default')
print keyCheck('key2', myarray, '#default')
print keyCheck('key3', myarray, '#default')

Output:

1
2
#default

You may also use this.Resources["mykey"]. I guess that is not much better than your own suggestion.

This is a bit faster:

static const char* s_hexTable[256] = 
{
    "00", "01", "02", "03", "04", "05", "06", "07", "08", "09", "0a", "0b", "0c", "0d", "0e", "0f", "10", "11",
    "12", "13", "14", "15", "16", "17", "18", "19", "1a", "1b", "1c", "1d", "1e", "1f", "20", "21", "22", "23",
    "24", "25", "26", "27", "28", "29", "2a", "2b", "2c", "2d", "2e", "2f", "30", "31", "32", "33", "34", "35",
    "36", "37", "38", "39", "3a", "3b", "3c", "3d", "3e", "3f", "40", "41", "42", "43", "44", "45", "46", "47",
    "48", "49", "4a", "4b", "4c", "4d", "4e", "4f", "50", "51", "52", "53", "54", "55", "56", "57", "58", "59",
    "5a", "5b", "5c", "5d", "5e", "5f", "60", "61", "62", "63", "64", "65", "66", "67", "68", "69", "6a", "6b",
    "6c", "6d", "6e", "6f", "70", "71", "72", "73", "74", "75", "76", "77", "78", "79", "7a", "7b", "7c", "7d",
    "7e", "7f", "80", "81", "82", "83", "84", "85", "86", "87", "88", "89", "8a", "8b", "8c", "8d", "8e", "8f",
    "90", "91", "92", "93", "94", "95", "96", "97", "98", "99", "9a", "9b", "9c", "9d", "9e", "9f", "a0", "a1",
    "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "aa", "ab", "ac", "ad", "ae", "af", "b0", "b1", "b2", "b3",
    "b4", "b5", "b6", "b7", "b8", "b9", "ba", "bb", "bc", "bd", "be", "bf", "c0", "c1", "c2", "c3", "c4", "c5",
    "c6", "c7", "c8", "c9", "ca", "cb", "cc", "cd", "ce", "cf", "d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7",
    "d8", "d9", "da", "db", "dc", "dd", "de", "df", "e0", "e1", "e2", "e3", "e4", "e5", "e6", "e7", "e8", "e9",
    "ea", "eb", "ec", "ed", "ee", "ef", "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", "f8", "f9", "fa", "fb",
    "fc", "fd", "fe", "ff"
};

// Convert binary data sequence [beginIt, endIt) to hexadecimal string
void dataToHexString(const uint8_t*const beginIt, const uint8_t*const endIt, string& str)
{
    str.clear();
    str.reserve((endIt - beginIt) * 2);
    for(const uint8_t* it(beginIt); it != endIt; ++it)
    {
        str += s_hexTable[*it];
    }
}

asciimatics provides a portable support for building text UI and animations:

#!/usr/bin/env python
from asciimatics.effects import RandomNoise  # $ pip install asciimatics
from asciimatics.renderers import SpeechBubble, Rainbow
from asciimatics.scene import Scene
from asciimatics.screen import Screen
from asciimatics.exceptions import ResizeScreenError


def demo(screen):
    render = Rainbow(screen, SpeechBubble('Rainbow'))
    effects = [RandomNoise(screen, signal=render)]
    screen.play([Scene(effects, -1)], stop_on_resize=True)

while True:
    try:
        Screen.wrapper(demo)
        break
    except ResizeScreenError:
        pass

Asciicast:

You can add this at the beginning after #include <iostream>:

using namespace std;

I have been trying to attach an audio which should autoplay and will be hidden. It's very simple. Just a few lines of HTML and CSS. Check this out!! Here is the piece of code I used within the body.

<div id="player">
    <audio controls autoplay hidden>
     <source src="file.mp3" type="audio/mpeg">
                unsupported !! 
    </audio>
</div>

There are two ways to do the redirect. Both apply to either subprocess.Popen or subprocess.call.

1. Set the keyword argument shell = True or executable = /path/to/the/shell and specify the command just as you have it there.

2. Since you're just redirecting the output to a file, set the keyword argument

   stdout = an_open_writeable_file_object
   

   where the object points to the output file.

subprocess.Popen is more general than subprocess.call.

Popen doesn't block, allowing you to interact with the process while it's running, or continue with other things in your Python program. The call to Popen returns a Popen object.

call does block. While it supports all the same arguments as the Popen constructor, so you can still set the process' output, environmental variables, etc., your script waits for the program to complete, and call returns a code representing the process' exit status.

returncode = call(*args, **kwargs) 

is basically the same as calling

returncode = Popen(*args, **kwargs).wait()

call is just a convenience function. It's implementation in CPython is in subprocess.py:

def call(*popenargs, timeout=None, **kwargs):
    """Run command with arguments.  Wait for command to complete or
    timeout, then return the returncode attribute.

    The arguments are the same as for the Popen constructor.  Example:

    retcode = call(["ls", "-l"])
    """
    with Popen(*popenargs, **kwargs) as p:
        try:
            return p.wait(timeout=timeout)
        except:
            p.kill()
            p.wait()
            raise

As you can see, it's a thin wrapper around Popen.

I was using the Windows SDK for core Win32 programming and had .NET 4.5 installed for "unknown" reasons. I have uninstalled that and installed 4.0 like previous answers and yeah, it worked for me too.

Just am flabbergasted that I had to use the useless .NET framework for building Win32 apps using the SDK.

Check android.os.Build.VERSION, which is a static class that holds various pieces of information about the Android OS a system is running.

If you care about all versions possible (back to original Android version), as in minSdkVersion is set to anything less than 4, then you will have to use android.os.Build.VERSION.SDK, which is a String that can be converted to the integer of the release.

If you are on at least API version 4 (Android 1.6 Donut), the current suggested way of getting the API level would be to check the value of android.os.Build.VERSION.SDK_INT, which is an integer.

In either case, the integer you get maps to an enum value from all those defined in android.os.Build.VERSION_CODES:

SDK_INT value        Build.VERSION_CODES        Human Version Name       
    1                  BASE                      Android 1.0 (no codename)
    2                  BASE_1_1                  Android 1.1 Petit Four
    3                  CUPCAKE                   Android 1.5 Cupcake
    4                  DONUT                     Android 1.6 Donut
    5                  ECLAIR                    Android 2.0 Eclair
    6                  ECLAIR_0_1                Android 2.0.1 Eclair                  
    7                  ECLAIR_MR1                Android 2.1 Eclair
    8                  FROYO                     Android 2.2 Froyo
    9                  GINGERBREAD               Android 2.3 Gingerbread
   10                  GINGERBREAD_MR1           Android 2.3.3 Gingerbread
   11                  HONEYCOMB                 Android 3.0 Honeycomb
   12                  HONEYCOMB_MR1             Android 3.1 Honeycomb
   13                  HONEYCOMB_MR2             Android 3.2 Honeycomb
   14                  ICE_CREAM_SANDWICH        Android 4.0 Ice Cream Sandwich
   15                  ICE_CREAM_SANDWICH_MR1    Android 4.0.3 Ice Cream Sandwich
   16                  JELLY_BEAN                Android 4.1 Jellybean
   17                  JELLY_BEAN_MR1            Android 4.2 Jellybean
   18                  JELLY_BEAN_MR2            Android 4.3 Jellybean
   19                  KITKAT                    Android 4.4 KitKat
   20                  KITKAT_WATCH              Android 4.4 KitKat Watch
   21                  LOLLIPOP                  Android 5.0 Lollipop
   22                  LOLLIPOP_MR1              Android 5.1 Lollipop
   23                  M                         Android 6.0 Marshmallow
   24                  N                         Android 7.0 Nougat
   25                  N_MR1                     Android 7.1.1 Nougat
   26                  O                         Android 8.0 Oreo
   27                  O_MR1                     Android 8 Oreo MR1
   28                  P                         Android 9 Pie
   29                  Q                         Android 10
  10000                CUR_DEVELOPMENT           Current Development Version

Note that some time between Android N and O, the Android SDK began aliasing CUR_DEVELOPMENT and the developer preview of the next major Android version to be the same SDK_INT value (10000).

//The fastest way to copy time            

DateTime justDate = new DateTime(2011, 1, 1); // 1/1/2011 12:00:00AM the date you will be adding time to, time ticks = 0
DateTime timeSource = new DateTime(1999, 2, 4, 10, 15, 30); // 2/4/1999 10:15:30AM - time tick = x

justDate = new DateTime(justDate.Date.Ticks + timeSource.TimeOfDay.Ticks);

Console.WriteLine(justDate); // 1/1/2011 10:15:30AM
Console.Read();

It is possible. Have a look at JSch.addIdentity(...)

This allows you to use key either as byte array or to read it from file.

import com.jcraft.jsch.Channel;
import com.jcraft.jsch.ChannelSftp;
import com.jcraft.jsch.JSch;
import com.jcraft.jsch.Session;

public class UserAuthPubKey {
    public static void main(String[] arg) {
        try {
            JSch jsch = new JSch();

            String user = "tjill";
            String host = "192.18.0.246";
            int port = 10022;
            String privateKey = ".ssh/id_rsa";

            jsch.addIdentity(privateKey);
            System.out.println("identity added ");

            Session session = jsch.getSession(user, host, port);
            System.out.println("session created.");

            // disabling StrictHostKeyChecking may help to make connection but makes it insecure
            // see http://stackoverflow.com/questions/30178936/jsch-sftp-security-with-session-setconfigstricthostkeychecking-no
            // 
            // java.util.Properties config = new java.util.Properties();
            // config.put("StrictHostKeyChecking", "no");
            // session.setConfig(config);

            session.connect();
            System.out.println("session connected.....");

            Channel channel = session.openChannel("sftp");
            channel.setInputStream(System.in);
            channel.setOutputStream(System.out);
            channel.connect();
            System.out.println("shell channel connected....");

            ChannelSftp c = (ChannelSftp) channel;

            String fileName = "test.txt";
            c.put(fileName, "./in/");
            c.exit();
            System.out.println("done");

        } catch (Exception e) {
            System.err.println(e);
        }
    }
}

In case you are having problem with a set of Docker containers, then make sure that you do not only EXPOSE the port 3306, but as well map the port from outside the container -p 3306:3306. For docker-compose.yml:

version: '2'

services:
    mdb:
        image: mariadb:10.1
        ports:
            - "3306:3306"
        …

Similar to the accepted question but it allows you to scale without the need of adding a new module to the index file each time you create one:

./modules/moduleA.js

export const example = 'example';
export const anotherExample = 'anotherExample';

./modules/index.js

// require all modules on the path and with the pattern defined
const req = require.context('./', true, /.js$/);

const modules = req.keys().map(req);

// export all modules
module.exports = modules;

./example.js

import { example, anotherExample } from './modules'

Apple have changed the name of the certificate that is issued. You can now use the same certificate for both development and production. While you can still request a development only certificate you can no longer request a production only certificate.

string1.equals(string2) is right way to do it.

String s = "something", t = "maybe something else";
 if (s == t)      // Legal, but usually results WRONG.
 if (s.equals(t)) // RIGHT way to check the two strings
  /* == will fail in following case:*/
 String s1 = new String("abc");
 String s2 = new String("abc");

 if(s1==s2) //it will return false

I think this will benefit you Try this I'm using to change the language in my application

String[] districts;
Spinner sp;

......

 sp = (Spinner) findViewById(R.id.sp);
         districts = getResources().getStringArray(R.array.lang_array);
         ArrayAdapter<String> adapter = new ArrayAdapter<String>(this, android.R.layout.simple_spinner_item,districts);
         sp.setAdapter(adapter);
         sp.setOnItemSelectedListener(new AdapterView.OnItemSelectedListener() {
              @Override
             public void onItemSelected(AdapterView<?> arg0, View arg1, int position, long arg3) {
                  // TODO Auto-generated method stub
                  int index = arg0.getSelectedItemPosition();
                  Toast.makeText(getBaseContext(), "You select "+districts[index]+" id "+position, Toast.LENGTH_LONG).show();
                  switch(position){
                      case 0:
                          setLocal("fr");
                          //recreate();
                          break;
                      case 1:
                          setLocal("ar");
                          //recreate();
                          break;
                      case 2:
                          setLocal("en");
                          //recreate();
                          break;
                      default: //For all other cases, do this
                          setLocal("en");
                          //recreate();
                          break;
                  }
              }
             @Override
            public void onNothingSelected(AdapterView<?> arg0) {
                   // TODO Auto-generated method stub
                         }
        });

and this is my String Array

<string-array name="lang_array">
    <item>french</item>
    <item>arabic</item>
    <item>english</item>
</string-array>

You can bypass https using below commands:

npm config set strict-ssl false

or set the registry URL from https or http like below:

npm config set registry="http://registry.npmjs.org/"

However, Personally I believe bypassing https is not the real solution, but we can use it as a workaround.

Please read this: http://haacked.com/archive/2008/10/23/model-binding-to-a-list.aspx
You should set indicies for your html elements "name" attributes like planCompareViewModel[0].PlanId, planCompareViewModel[1].PlanId to make binder able to parse them into IEnumerable.
Instead of @foreach (var planVM in Model) use for loop and render names with indexes.

For me, I had to install Microsoft Access Database Engine 2010 Redistributable and restart my computer.

click on these link for JS deminification. That will install on FF as extension that help you in debugging js at runtime.

https://addons.mozilla.org/en-US/firefox/addon/javascript-deminifier/eula/141018?src=dp-btn-primary

This can now also happen in Node.js as of version 14.

It happens when you declare your package type as module in your package.json. If you do this, certain CommonJS variables can't be used, including require.

To fix this, remove "type": "module" from your package.json and make sure you don't have any files ending with .mjs.

The answer I was looking for is at https://unix.stackexchange.com/a/9557/114862.

Using the -c flag when the local file is of greater or equal size to the server version will avoid re-downloading.

To my mind, the question ought to be the other way round whenever you see an inner class - does it really need to be an inner class, with the extra complexity and the implicit (rather than explicit and clearer, IMO) reference to an instance of the containing class?

Mind you, I'm biased as a C# fan - C# doesn't have the equivalent of inner classes, although it does have nested types. I can't say I've missed inner classes yet :)

Just use the == with the negation symbol (!). If dtfm is the name of your data.frame:

dtfm[!dtfm$C == "Foo", ]

Or, to move the negation in the comparison:

dtfm[dtfm$C != "Foo", ]

Or, even shorter using subset():

subset(dtfm, C!="Foo")

Here is something that might help. Use the root privileges. if you have .bin then simply add the execution permission to the bin file.

chmod a+x jdk*.bin

next step is to run the .bin file which is simply

./jdk*.bin in the location you want to install.

you are done.

Try this:

Create A Macro with the following thing inside:

Selection.Copy
ActiveCell.Offset(1, 0).Select
ActiveSheet.Paste
ActiveCell.Offset(-1, 1).Select
Selection.Copy
ActiveCell.Offset(1, 0).Select
ActiveSheet.Paste
ActiveCell.Offset(0, -1).Select

That particular macro will copy the current cell (place your cursor in the VOL cell you wish to copy) down one row and then copy the CAP cell also.

This is only a single loop so you can automate copying VOL and CAP of where your current active cell (where your cursor is) to down 1 row.

Just put it inside a For loop statement to do it x number of times. like:

For i = 1 to 100 'Do this 100 times
    Selection.Copy
    ActiveCell.Offset(1, 0).Select
    ActiveSheet.Paste
    ActiveCell.Offset(-1, 1).Select
    Selection.Copy
    ActiveCell.Offset(1, 0).Select
    ActiveSheet.Paste
    ActiveCell.Offset(0, -1).Select
Next i

On Mac OS X, it's in the Python framework in /System/Library/Frameworks/Python.framework/Resources.

Full path is:

/System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python

Btw it's easy to find out where you can find a specific binary: which Python will show you the path of your Python binary (which is probably the same as I posted above).

Another possible solution:

    var c = $("#checkboxid");
    if (c.is(":checked")) {
         $('#checkboxid').prop('checked', false);
    } else {
         $('#checkboxid').prop('checked', true);
    }

I did a little investigation and the solution that works for me was a mix of a few solutions founded in this post.

I'm basically compiling this solution and I'm posting what works for me. In my case, I'm don't want to use any token from .net core.

public async Task ResetPassword(string userId, string password)
{
    var user = await _userManager.FindByIdAsync(userId);
    var hashPassword= _userManager.PasswordHasher.HashPassword(user, password);
    user.PasswordHash = passwordHash;
    await _userManager.UpdateAsync(user);

}

100% height refers to the height of the parent container. In order for your div to go full height of the body you have to set this:

html, body {height: 100%; min-height: 100%}

Hope it helps.

For those of you who tried all the above answers without any success, try lowering your -Xms value. I am required to support an older Eclipse (Weblogic Eclipse 10.3.6) - I had the following .ini on my Windows 7 machine and my Windows Server 2008 R2 Enterprise VM (the Java version below points to a 32-bit Java) that had worked and were working perfectly, respectively.

-vm
C:/Java/Java7/jdk1.7.0_79/bin/javaw.exe
-startup
plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.1.200.v20120522-1813
-showsplash
org.eclipse.platform
--launcher.defaultAction
openFile
-vmargs
-Xms1024m
-Xmx1024m
-XX:MaxPermSize=256m
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dweblogic.home=C:/Oracle/Middleware/wlserver_10.3

So a 32-bit Java for a 32-bit Eclipse, but still exit code 1. Based on all answers I had seen here, and the only change being a new laptop with Windows 10, the only possible explanation was that the new OS and the Eclipse were disagreeing on something. So I started playing around with each of the values, and it worked when I lowered both Xms and Xmx to 512m. I have a hunch that possibly the new Windows OS is preventing a higher initial heap size based on some run condition (the higher -Xms does work on Windows 10 on all other similar devices I came across) - so any other explanation is welcome. Meanwhile following is the only value I tweaked to successfully launch Eclipse.

-Xms512m 

You can use DateFormat(java.text.*) to parse the date:

DateFormat df = new SimpleDateFormat("EEE MMM dd kk:mm:ss z yyyy", Locale.ENGLISH);
Date d = df.parse("Mon May 27 11:46:15 IST 2013")

You will have to change the locale to match your own (with this you will get 10:46:15). Then you can use the same code you have to convert it to a timestamp.

The shortest and easiest answer is: you shouldn't vertically center things in webpages. HTML and CSS simply are not created with that in mind. They are text formatting languages, not user interface design languages.

That said, this is the best way I can think of. However, this will NOT WORK in Internet Explorer 7 and below!

<style>
  html, body {
    height: 100%;
  }
  #tableContainer-1 {
    height: 100%;
    width: 100%;
    display: table;
  }
  #tableContainer-2 {
    vertical-align: middle;
    display: table-cell;
    height: 100%;
  }
  #myTable {
    margin: 0 auto;
  }
</style>
<div id="tableContainer-1">
  <div id="tableContainer-2">
    <table id="myTable" border>
      <tr><td>Name</td><td>J W BUSH</td></tr>
      <tr><td>Proficiency</td><td>PHP</td></tr>
      <tr><td>Company</td><td>BLAH BLAH</td></tr>
    </table>
  </div>
</div>

If your iPhone is jailbroken you can use DemoGod

create a <select> with id , append it to document.. and call .combobox

  var dynamicScript='<select id="selectid"><option value="1">...</option>.....</select>'
  $('body').append(dynamicScript); //append this to the place your wanted.
  $('#selectid').combobox();  //get the id and add .combobox();

this should do the trick.. you can hide the select if you want and after .combobox show it..or else use find..

 $(document).find('select').combobox() //though this is not good performancewise

Output one image every minute, named img001.jpg, img002.jpg, img003.jpg, etc. The %03d dictates that the ordinal number of each output image will be formatted using 3 digits.

ffmpeg -i myvideo.avi -vf fps=1/60 img%03d.jpg

Change the fps=1/60 to fps=1/30 to capture a image every 30 seconds. Similarly if you want to capture a image every 5 seconds then change fps=1/60 to fps=1/5

SOURCE: https://trac.ffmpeg.org/wiki/Create a thumbnail image every X seconds of the video

#include<iostream>
#include<conio.h>
#include<windows.h>
using namespace std;

int main()
{

    Beep(1568, 200);
    Beep(1568, 200);
    Beep(1568, 200);
    Beep(1245, 1000);
    Beep(1397, 200);
    Beep(1397, 200);
    Beep(1397, 200);
    Beep(1175, 1000);

cout<<endl;
_getch()

return 0
}

Add permission to the folder where your .mdf file is.

Check this name: NT Service\MSSQLSERVER

And change the Location to your server name.

Hope this helps. I was able to open pdf files from all subfolders of a folder and copy content to the macro enabled workbook using shell as recommended above.Please see below the code .

Sub ConsolidateWorkbooksLTD()
Dim adobeReaderPath As String
Dim pathAndFileName As String
Dim shellPathName As String
Dim fso, subFldr, subFlodr
Dim FolderPath
Dim Filename As String
Dim Sheet As Worksheet
Dim ws As Worksheet
Dim HK As String
Dim s As String
Dim J As String
Dim diaFolder As FileDialog
Dim mFolder As String
Dim Basebk As Workbook
Dim Actbk As Workbook

Application.ScreenUpdating = False

Set Basebk = ThisWorkbook

' Open the file dialog
Set diaFolder = Application.FileDialog(msoFileDialogFolderPicker)
diaFolder.AllowMultiSelect = False
diaFolder.Show
MsgBox diaFolder.SelectedItems(1) & "\"
mFolder = diaFolder.SelectedItems(1) & "\"
Set diaFolder = Nothing
Set fso = CreateObject("Scripting.FileSystemObject")
Set FolderPath = fso.GetFolder(mFolder)
For Each subFldr In FolderPath.SubFolders
subFlodr = subFldr & "\"
Filename = Dir(subFldr & "\*.csv*")
Do While Len(Filename) > 0
J = Filename
J = Left(J, Len(J) - 4) & ".pdf"
   Workbooks.Open Filename:=subFldr & "\" & Filename, ReadOnly:=True
   For Each Sheet In ActiveWorkbook.Sheets
   Set Actbk = ActiveWorkbook
   s = ActiveWorkbook.Name
   HK = Left(s, Len(s) - 4)
   If InStrRev(HK, "_S") <> 0 Then
   HK = Right(HK, Len(HK) - InStrRev(HK, "_S"))
   Else
   HK = Right(HK, Len(HK) - InStrRev(HK, "_L"))
   End If
   Sheet.Copy After:=ThisWorkbook.Sheets(1)
   ActiveSheet.Name = HK

   ' Open pdf file to copy SIC Decsription
   pathAndFileName = subFlodr & J
   adobeReaderPath = "C:\Program Files (x86)\Adobe\Acrobat Reader DC\Reader\AcroRd32.exe"
   shellPathName = adobeReaderPath & " """ & pathAndFileName & """"
   Call Shell( _
    pathname:=shellPathName, _
    windowstyle:=vbNormalFocus)
    Application.Wait Now + TimeValue("0:00:2")

    SendKeys "%vpc"
    SendKeys "^a", True
    Application.Wait Now + TimeValue("00:00:2")

    ' send key to copy
     SendKeys "^c"
    ' wait 2 secs
     Application.Wait Now + TimeValue("00:00:2")
      ' activate this workook and paste the data
        ThisWorkbook.Activate
        Set ws = ThisWorkbook.Sheets(HK)
        Range("O1:O5").Select
        ws.Paste

        Application.Wait Now + TimeValue("00:00:3")
        Application.CutCopyMode = False
        Application.Wait Now + TimeValue("00:00:3")
       Call Shell("TaskKill /F /IM AcroRd32.exe", vbHide)
       ' send key to close pdf file
        SendKeys "^q"
       Application.Wait Now + TimeValue("00:00:3")
 Next Sheet
 Workbooks(Filename).Close SaveAs = True
 Filename = Dir()
Loop
Next
Application.ScreenUpdating = True
End Sub

I wrote the piece of code to copy from pdf and csv to the macro enabled workbook and you may need to fine tune as per your requirement

Regards, Hema Kasturi

You need to include the appropriate header

#include <stdio.h>

If you're not sure which header a standard function is defined in, the function's man page will state this.

If you are using Jupyter, try the variable inspector extension. You can click each variable to see the entire array.

Goto Debug Menu->Press StartWithoutDebugging

Try like this: server.bind(("0.0.0.0", 6677))

You can use the modulus operator, but that can be slow. A more efficient way would be to check the lowest bit because that determines whether a number is even or odd. The code would look something like this:

public static void main(String[] args) {        
    System.out.println("Enter a number to check if it is even or odd");        
    System.out.println("Your number is " + (((new Scanner(System.in).nextInt() & 1) == 0) ? "even" : "odd"));        
}

If you are using oc4j to deploy the ear.

Make sure you set in the project the correct path for deploy.home=

You can fiind deploy.home in common.properties file

The oc4j needs to reload the new created class in the ear so that the server class and the client class have the same serialVersionUID

git remote set-url origin <URL>

To anyone still struggling to get the os.environ solution to work as I was, check that this is placed before you import tensorflow in your script, just like mwweb's answer:

import os
os.environ['TF_CPP_MIN_LOG_LEVEL'] = '3'  # or any {'0', '1', '2'}
import tensorflow as tf

Run this in the command line:

php -r "echo php_ini_loaded_file().PHP_EOL;"

Answering the question: to remove the last character, just use:string = string[:-1].

If you want to remove the last '\' if there is one (or if there is more than one):

while string[-1]=='\\':
    string = string[:-1]

If it's a path, then use the os.path functions:

dir = "dir1\\dir2\\file.jpg\\"   #I'm using windows by the way
os.path.dirname(dir)

although I would 'add' a slash in the end to prevent missing the filename in case there's no slash at the end of the original string:

dir = "dir1\\dir2\\file.jpg"
os.path.dirname(dir + "\\")

When using abspath, (if the path isn't absolute I guess,) will add the current working directory to the path.

os.path.abspath(dir)

  panel: {
    // ios
    backgroundColor: '#03A9F4',
    alignItems: 'center', 
    shadowOffset: {width: 0, height: 13}, 
    shadowOpacity: 0.3,
    shadowRadius: 6,

    // android (Android +5.0)
    elevation: 3,
  }

or you can use react-native-shadow for android

In a match situation the first would return one match per whitespace, when the second would return a match for each group of whitespaces.

The result is the same because you're replacing it with an empty string. If you replace it with 'x' for instance, the results would differ.

str.replace(/\s/g, '') will return 'xxAxBxxCxxxDxEF '

while str.replace(/\s+/g, '') will return 'xAxBxCxDxEF '

because \s matches each whitespace, replacing each one with 'x', and \s+ matches groups of whitespaces, replacing multiple sequential whitespaces with a single 'x'.

It's very easy.

"your chrome path" -kiosk -fullscreen "your URL"

Example:

"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" -kiosk -fullscreen http://google.com

Close all Chrome sessions first !

To exit: Press ALT-TAB > hold ALT and press X in the windows task. (win10)

you should add servler-api.jar file in WEB-INF/lib folder

Then just modify the previous answers to:

Console.Write(strToProcess.Replace("@", "@" + Environment.NewLine));

If you don't want the newlines in the text file, then don't preserve it.

Ian Kemp has the answer (have some points btw..), this is to simply add some meat to one of his steps.

The reason I ended up here was that dev's machines were building fine, but the build server simply wasn't pulling down the packages required (empty packages folder) and therefore the build was failing. Logging onto the build server and manually building the solution worked, however.

To fulfil the second of Ians 3 point steps (running nuget restore), you can create an MSBuild target running the exec command to run the nuget restore command, as below (in this case nuget.exe is in the .nuget folder, rather than on the path), which can then be run in a TeamCity build step (other CI available...) immediately prior to building the solution

<Target Name="BeforeBuild">
  <Exec Command="..\.nuget\nuget restore ..\MySolution.sln"/>
</Target>

For the record I'd already tried the "nuget installer" runner type but this step was hanging on web projects (worked for DLL's and Windows projects)

This will work:

$('#A')[0].hasAttribute('myattr');

Today (2.5 years after this answer) you can safely use Array.forEach. As @ricosrealm suggests, decodeURIComponent was used in this function.

function getJsonFromUrl(url) {
  if(!url) url = location.search;
  var query = url.substr(1);
  var result = {};
  query.split("&").forEach(function(part) {
    var item = part.split("=");
    result[item[0]] = decodeURIComponent(item[1]);
  });
  return result;
}

actually it's not that simple, see the peer-review in the comments, especially:

• hash based routing (@cmfolio)
• array parameters (@user2368055)
• proper use of decodeURIComponent and non-encoded = (@AndrewF)
• non-encoded + (added by me)

For further details, see MDN article and RFC 3986.

Maybe this should go to codereview SE, but here is safer and regexp-free code:

function getJsonFromUrl(url) {
  if(!url) url = location.href;
  var question = url.indexOf("?");
  var hash = url.indexOf("#");
  if(hash==-1 && question==-1) return {};
  if(hash==-1) hash = url.length;
  var query = question==-1 || hash==question+1 ? url.substring(hash) : 
  url.substring(question+1,hash);
  var result = {};
  query.split("&").forEach(function(part) {
    if(!part) return;
    part = part.split("+").join(" "); // replace every + with space, regexp-free version
    var eq = part.indexOf("=");
    var key = eq>-1 ? part.substr(0,eq) : part;
    var val = eq>-1 ? decodeURIComponent(part.substr(eq+1)) : "";
    var from = key.indexOf("[");
    if(from==-1) result[decodeURIComponent(key)] = val;
    else {
      var to = key.indexOf("]",from);
      var index = decodeURIComponent(key.substring(from+1,to));
      key = decodeURIComponent(key.substring(0,from));
      if(!result[key]) result[key] = [];
      if(!index) result[key].push(val);
      else result[key][index] = val;
    }
  });
  return result;
}

This function can parse even URLs like

var url = "?foo%20e[]=a%20a&foo+e[%5Bx%5D]=b&foo e[]=c";
// {"foo e": ["a a",  "c",  "[x]":"b"]}

var obj = getJsonFromUrl(url)["foo e"];
for(var key in obj) { // Array.forEach would skip string keys here
  console.log(key,":",obj[key]);
}
/*
  0 : a a
  1 : c
  [x] : b
*/

I am covering most of the examples of Dependency Injection in ASP.NET Web API 2

public interface IShape
{
    string Name { get; set; }
}

public class NoShape : IShape
{
    public string Name { get; set; } = "I have No Shape";
}

public class Circle : IShape
{
    public string Name { get; set; } = "Circle";
}

public class Rectangle : IShape
{
    public Rectangle(string name)
    {
        this.Name = name;
    }

    public string Name { get; set; } = "Rectangle";
}

In DIAutoV2Controller.cs Auto Injection mechanism is used

[RoutePrefix("api/v2/DIAutoExample")]
public class DIAutoV2Controller : ApiController
{
    private string ConstructorInjected;
    private string MethodInjected1;
    private string MethodInjected2;
    private string MethodInjected3;

    [Dependency]
    public IShape NoShape { get; set; }

    [Dependency("Circle")]
    public IShape ShapeCircle { get; set; }

    [Dependency("Rectangle")]
    public IShape ShapeRectangle { get; set; }

    [Dependency("PiValueExample1")]
    public double PiValue { get; set; }

    [InjectionConstructor]
    public DIAutoV2Controller([Dependency("Circle")]IShape shape1, [Dependency("Rectangle")]IShape shape2, IShape shape3)
    {
        this.ConstructorInjected = shape1.Name + " & " + shape2.Name + " & " + shape3.Name;
    }

    [NonAction]
    [InjectionMethod]
    public void Initialize()
    {
        this.MethodInjected1 = "Default Initialize done";
    }

    [NonAction]
    [InjectionMethod]
    public void Initialize2([Dependency("Circle")]IShape shape1)
    {
        this.MethodInjected2 = shape1.Name;
    }

    [NonAction]
    [InjectionMethod]
    public void Initialize3(IShape shape1)
    {
        this.MethodInjected3 = shape1.Name;
    }

    [HttpGet]
    [Route("constructorinjection")]
    public string constructorinjection()
    {
        return "Constructor Injected: " + this.ConstructorInjected;
    }

    [HttpGet]
    [Route("GetNoShape")]
    public string GetNoShape()
    {
        return "Property Injected: " + this.NoShape.Name;
    }

    [HttpGet]
    [Route("GetShapeCircle")]
    public string GetShapeCircle()
    {
        return "Property Injected: " + this.ShapeCircle.Name;
    }

    [HttpGet]
    [Route("GetShapeRectangle")]
    public string GetShapeRectangle()
    {
        return "Property Injected: " + this.ShapeRectangle.Name;
    }

    [HttpGet]
    [Route("GetPiValue")]
    public string GetPiValue()
    {
        return "Property Injected: " + this.PiValue;
    }

    [HttpGet]
    [Route("MethodInjected1")]
    public string InjectionMethod1()
    {
        return "Method Injected: " + this.MethodInjected1;
    }

    [HttpGet]
    [Route("MethodInjected2")]
    public string InjectionMethod2()
    {
        return "Method Injected: " + this.MethodInjected2;
    }

    [HttpGet]
    [Route("MethodInjected3")]
    public string InjectionMethod3()
    {
        return "Method Injected: " + this.MethodInjected3;
    }
}

In DIV2Controller.cs everything will be injected from the Dependency Configuration Resolver class

[RoutePrefix("api/v2/DIExample")]
public class DIV2Controller : ApiController
{
    private string ConstructorInjected;
    private string MethodInjected1;
    private string MethodInjected2;
    public string MyPropertyName { get; set; }
    public double PiValue1 { get; set; }
    public double PiValue2 { get; set; }
    public IShape Shape { get; set; }

    // MethodInjected
    [NonAction]
    public void Initialize()
    {
        this.MethodInjected1 = "Default Initialize done";
    }

    // MethodInjected
    [NonAction]
    public void Initialize2(string myproperty1, IShape shape1, string myproperty2, IShape shape2)
    {
        this.MethodInjected2 = myproperty1 + " & " + shape1.Name + " & " + myproperty2 + " & " + shape2.Name;
    }

    public DIV2Controller(string myproperty1, IShape shape1, string myproperty2, IShape shape2)
    {
        this.ConstructorInjected = myproperty1 + " & " + shape1.Name + " & " + myproperty2 + " & " + shape2.Name;
    }

    [HttpGet]
    [Route("constructorinjection")]
    public string constructorinjection()
    {
        return "Constructor Injected: " + this.ConstructorInjected;
    }

    [HttpGet]
    [Route("PropertyInjected")]
    public string InjectionProperty()
    {
        return "Property Injected: " + this.MyPropertyName;
    }

    [HttpGet]
    [Route("GetPiValue1")]
    public string GetPiValue1()
    {
        return "Property Injected: " + this.PiValue1;
    }

    [HttpGet]
    [Route("GetPiValue2")]
    public string GetPiValue2()
    {
        return "Property Injected: " + this.PiValue2;
    }

    [HttpGet]
    [Route("GetShape")]
    public string GetShape()
    {
        return "Property Injected: " + this.Shape.Name;
    }

    [HttpGet]
    [Route("MethodInjected1")]
    public string InjectionMethod1()
    {
        return "Method Injected: " + this.MethodInjected1;
    }

    [HttpGet]
    [Route("MethodInjected2")]
    public string InjectionMethod2()
    {
        return "Method Injected: " + this.MethodInjected2;
    }
}

Configuring the Dependency Resolver

public static void Register(HttpConfiguration config)
{
    var container = new UnityContainer();
    RegisterInterfaces(container);
    config.DependencyResolver = new UnityResolver(container);

    // Other Web API configuration not shown.
}

private static void RegisterInterfaces(UnityContainer container)
{
    var dbContext = new SchoolDbContext();
    // Registration with constructor injection
    container.RegisterType<IStudentRepository, StudentRepository>(new InjectionConstructor(dbContext));
    container.RegisterType<ICourseRepository, CourseRepository>(new InjectionConstructor(dbContext));

    // Set constant/default value of Pi = 3.141 
    container.RegisterInstance<double>("PiValueExample1", 3.141);
    container.RegisterInstance<double>("PiValueExample2", 3.14);

    // without a name
    container.RegisterInstance<IShape>(new NoShape());

    // with circle name
    container.RegisterType<IShape, Circle>("Circle", new InjectionProperty("Name", "I am Circle"));

    // with rectangle name
    container.RegisterType<IShape, Rectangle>("Rectangle", new InjectionConstructor("I am Rectangle"));

    // Complex type like Constructor, Property and method injection
    container.RegisterType<DIV2Controller, DIV2Controller>(
        new InjectionConstructor("Constructor Value1", container.Resolve<IShape>("Circle"), "Constructor Value2", container.Resolve<IShape>()),
        new InjectionMethod("Initialize"),
        new InjectionMethod("Initialize2", "Value1", container.Resolve<IShape>("Circle"), "Value2", container.Resolve<IShape>()),
        new InjectionProperty("MyPropertyName", "Property Value"),
        new InjectionProperty("PiValue1", container.Resolve<double>("PiValueExample1")),
        new InjectionProperty("Shape", container.Resolve<IShape>("Rectangle")),
        new InjectionProperty("PiValue2", container.Resolve<double>("PiValueExample2")));
}

public string Type { get; set; } 

is no different than doing

private string _Type;

public string Type
{    
  get { return _Type; }
  set { _Type = value; }
}

You can try something like this:

strncpy(new_str, str1, strlen(str1));
strcat(new_str, str2);

More info on strncpy: http://www.cplusplus.com/reference/clibrary/cstring/strncpy/

The difference is in the subsystem that each executable targets.

• java.exe targets the CONSOLE subsystem.
• javaw.exe targets the WINDOWS subsystem.

In compact edition will take size automatically for datetime data type i.e. (8) so no need to set size of field and generate error for this operation...

Before actually using GUI dialogues, consider using console prompts. Quite often you can get away with simple "y/n?" prompts, which in bash you achieve via the read command..

read -p "Do something? ";
if [ $REPLY == "y" ]; then
    echo yay;
fi

If console prompt's just won't cut it, Zenity is really easy to use, for example:

      zenity --error --text="Testing..."
      zenity --question --text="Continue?"

This only works on Linux/Gnome (or rather, it'll only be installed by default on such systems). The read method will work on pretty much any platform (including headless machines, or via SSH)

If you need anything more complex than what read or Zenity provides, "change to C++" is really the best method (although I'd recommend Python/Ruby over C++ for such shell-script-replacement tasks)

I want to do simple interface for some strange game, the progress bar for health or something is the example for what I want. Variable "HEALTH" is 34, so make progress bar filled in 34/100

As a command-line script, it'd use Python:

$ export HEALTH=34
$ python -c "import os; print '*' * int(os.environ.get('HEALTH', 0))"
**********************************

Or to normalise the values between 1 and 78 (so you don't get line-wrapping on a standard terminal size):

$ python -c "import os; print '*' * int((int(os.environ.get('HEALTH', 0)) / 100.0) * 78)"

Zenity also has a Progress Dialog,

#!/bin/sh
(
echo "10" ; sleep 1
echo "# Updating mail logs" ; sleep 1
echo "20" ; sleep 1
echo "# Resetting cron jobs" ; sleep 1
echo "50" ; sleep 1
echo "This line will just be ignored" ; sleep 1
echo "75" ; sleep 1
echo "# Rebooting system" ; sleep 1
echo "100" ; sleep 1
) |
zenity --progress \
  --title="Update System Logs" \
  --text="Scanning mail logs..." \
  --percentage=0

if [ "$?" = -1 ] ; then
        zenity --error \
          --text="Update canceled."
fi

As I said before, if Zenity cannot do what you need, look into writing your game-thing as a "proper" script in Python/Ruby/Perl/C++/etc as it sounds like you're pushing the bounds of what a shell-script can do..

This article talks about modifying the EXIF data without the re-saving/re-compressing (and thus loss of information -- it actually uses a "trick"; there may be more direct libraries) required by the SetResolution approach. This was found on a quick google search, but I wanted to point out that all you need to do is modify the stored EXIF data.

Also: .NET lib for EXIF modification and another SO question. Google owns when you know good search terms.

A Simple Approach will be to use a normal link and add Bootstrap modal effect to it. Just make use of my Code, hopefully you will get it run.

 <div class="container">
        <div class="row">
            <div class="modal fade" id="myModal" tabindex="-1" role="dialog" aria-labelledby="addContact" aria-hidden="true">
                <div class="modal-dialog">
                    <div class="modal-content">
                        <div class="modal-header">
                            <button type="button" class="close" data-dismiss="modal" aria-hidden="true"><b style="color:#fb3600; font-weight:700;">X</b></button><!--&times;-->
                            <h4 class="modal-title text-center" id="addContact">Add Contact</h4>
                        </div>
                        <div class="modal-body">
                            <div class="row">
                                <ul class="nav nav-tabs">
                                    <li class="active">
                                        <a data-toggle="tab" style="background-color:#f5dfbe" href="#contactTab">Contact</a>
                                    </li>
                                    <li>
                                        <a data-toggle="tab" style="background-color:#a6d2f6" href="#speechTab">Speech</a>
                                    </li>
                                </ul>
                                <div class="tab-content">
                                    <div id="contactTab" class="tab-pane in active"><partial name="CreateContactTag"></div>
                                    <div id="speechTab" class="tab-pane fade in"><partial name="CreateSpeechTag"></div>
                                </div>

                            </div>
                        </div>
                        <div class="modal-footer">
                            <a class="btn btn-info" data-dismiss="modal">Close</a>
                        </div>
                    </div>
                </div>
            </div>
        </div>
    </div>

In .plist file set property:

<key>UIViewControllerBasedStatusBarAppearance</key>
<false/>

It hides the statusBar.

You bind in onResume but unbind in onDestroy. You should do the unbinding in onPause instead, so that there are always matching pairs of bind/unbind calls. Your intermittent errors will be where your activity is paused but not destroyed, and then resumed again.

There are two totally conflicting answers with large number of votes one is 160px@1024 the other is 180px@1024. So witch one?

I ran some experiments and I think that it is 180px@1024 so drbarnard is correct.

I downloaded iTunes U icon from the App Store it's 175x175px I upscaled it in photoshop to 1024px and put two shapes on it, one with 160px radius and one with 180px.

As you can see below the shape (thin gray line) with 160px (the 1st one) is a bit off whereas the one with 180px looks just fine.

This is what I do now in PhotoShop:

1. I create a canvas sized 1026x1026px with a 180px mask for main design Smart Object.
2. I duplicate the main Smart Object 5 times and resize them to 1024px, 144px, 114px, 72px and 57px.
3. I put a "New layered Based Slice" on each Smart Objects and I rename slices according to their size (e.g. icon-72px).
4. When I save the artwork I select "All User Slices" and BANG! I have all icons necessary for my app.

Make sure you have the prerequisite, a JVM (http://wiki.eclipse.org/Eclipse/Installation#Install_a_JVM) installed.

This will be a JRE and JDK package.

There are a number of sources which includes: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

You should avoid using refs, you can do it with onChange function.

On every change, update the state for the changed field.

Then you can easily check if that field is empty or whatever else you want.

You could do something as follows :

    class Test extends React.Component {
        constructor(props){
           super(props);
      
           this.state = {
               fields: {},
               errors: {}
           }
        }
    
        handleValidation(){
            let fields = this.state.fields;
            let errors = {};
            let formIsValid = true;

            //Name
            if(!fields["name"]){
               formIsValid = false;
               errors["name"] = "Cannot be empty";
            }
      
            if(typeof fields["name"] !== "undefined"){
               if(!fields["name"].match(/^[a-zA-Z]+$/)){
                  formIsValid = false;
                  errors["name"] = "Only letters";
               }        
            }
       
            //Email
            if(!fields["email"]){
               formIsValid = false;
               errors["email"] = "Cannot be empty";
            }
      
            if(typeof fields["email"] !== "undefined"){
               let lastAtPos = fields["email"].lastIndexOf('@');
               let lastDotPos = fields["email"].lastIndexOf('.');

               if (!(lastAtPos < lastDotPos && lastAtPos > 0 && fields["email"].indexOf('@@') == -1 && lastDotPos > 2 && (fields["email"].length - lastDotPos) > 2)) {
                  formIsValid = false;
                  errors["email"] = "Email is not valid";
                }
           }  

           this.setState({errors: errors});
           return formIsValid;
       }
        
       contactSubmit(e){
            e.preventDefault();

            if(this.handleValidation()){
               alert("Form submitted");
            }else{
               alert("Form has errors.")
            }
      
        }
    
        handleChange(field, e){         
            let fields = this.state.fields;
            fields[field] = e.target.value;        
            this.setState({fields});
        }
    
        render(){
            return (
                <div>           
                   <form name="contactform" className="contactform" onSubmit= {this.contactSubmit.bind(this)}>
                        <div className="col-md-6">
                          <fieldset>
                               <input ref="name" type="text" size="30" placeholder="Name" onChange={this.handleChange.bind(this, "name")} value={this.state.fields["name"]}/>
                               <span style={{color: "red"}}>{this.state.errors["name"]}</span>
                              <br/>
                             <input refs="email" type="text" size="30" placeholder="Email" onChange={this.handleChange.bind(this, "email")} value={this.state.fields["email"]}/>
                             <span style={{color: "red"}}>{this.state.errors["email"]}</span>
                             <br/>
                             <input refs="phone" type="text" size="30" placeholder="Phone" onChange={this.handleChange.bind(this, "phone")} value={this.state.fields["phone"]}/>
                             <br/>
                             <input refs="address" type="text" size="30" placeholder="Address" onChange={this.handleChange.bind(this, "address")} value={this.state.fields["address"]}/>
                             <br/>
                         </fieldset>
                      </div>
          
                  </form>
                </div>
          )
        }
    }

    React.render(<Test />, document.getElementById('container'));

In this example I did the validation only for email and name, but you have an idea how to do it. For the rest you can do it self.

There is maybe a better way, but you will get the idea.

Here is fiddle.

Hope this helps.

Using a single Awk:

... | awk -F '[/:]' '{print $5}'

That is, using as field separator either / or :, the username is always in field 5.

To store it in a variable:

username=$(... | awk -F '[/:]' '{print $5}')

A more flexible implementation with sed that doesn't require username to be field 5:

... | sed -e s/:.*// -e s?.*/??

That is, delete everything from : and beyond, and then delete everything up until the last /. sed is probably faster too than awk, so this alternative is definitely better.

Duplicate the father (or use symlink/reference).

For example, if you are using hierarchical database:

$ #each person node has two nodes representing its parents.
$ mkdir Family
$ mkdir Family/Son
$ mkdir Family/Son/Daughter
$ mkdir Family/Son/Father
$ mkdir Family/Son/Daughter/Father
$ ln -s Family/Son/Daughter/Father Family/Son/Father
$ mkdir Family/Son/Daughter/Wife
$ tree Family
Family
+-- Son
    +-- Daughter
    ¦   +-- Father
    ¦   +-- Wife
    +-- Father -> Family/Son/Daughter/Father

4 directories, 1 file

RESTful API (Route):

rtr.route('/testing')
.get((req, res)=>{
    res.render('test')
})
.post((req, res, next)=>{
       res.render('test')
})

AJAX Code:

$(function(){
$('#anyid').on('click', function(e){
    e.preventDefault()
    $.ajax({
        url: '/testing',
        method: 'GET',
        contentType: 'application/json',
        success: function(res){
            console.log('GET Request')
        }
    })
})

$('#anyid').on('submit', function(e){
    e.preventDefault()
    $.ajax({
        url: '/testing',
        method: 'POST',
        contentType: 'application/json',
        data: JSON.stringify({
            info: "put data here to pass in JSON format."
        }),
        success: function(res){
            console.log('POST Request')
        }
    })
})
})

It could be related with your Java version. Go ahead and download the Database version which includes Java.

However, if you are configuring a local development workstation I recommend you to download the Express Edition.

Here is the link: http://www.oracle.com/technetwork/products/express-edition/downloads/index-083047.html

or google this: OracleXE112_Win64

Good luck!

It is very dependent of the engine that you use for generating html files. If you are using Hugo for generating htmls you have to write down like this:

<a href="https://example.com" target="_blank" rel="noopener"><span>Example Text</span> </a>.

In response to your first question: Yes, you have to run a server app to send the messages, as well as a client app to receive them.

In response to your second question: Yes, every application needs its own API key. This key is for your server app, not the client.

If you have not set the type of a file, Git tries to determine it automatically and a file with really long lines and maybe some wide characters (e.g. Unicode) is treated as binary. With the .gitattributes file you can define how Git interpretes the file. Setting the diff attribute manually lets Git interprete the file content as text and will do an usual diff.

Just add a .gitattributes to your repository root folder and set the diff attribute to the paths or files. Here's an example:

src/Acme/DemoBundle/Resources/public/js/i18n/* diff
doc/Help/NothingToSay.yml                      diff
*.css                                          diff

If you want to check if there are attributes set on a file, you can do that with the help of git check-attr

git check-attr --all -- src/my_file.txt

Another nice reference about Git attributes could be found here.

Version for Python 3

I adjusted the code of @madprops for Python 3

# getem.py
# python2 script to download all images in a given url
# use: python getem.py http://url.where.images.are

from bs4 import BeautifulSoup
import urllib.request
import shutil
import requests
from urllib.parse import urljoin
import sys
import time

def make_soup(url):
    req = urllib.request.Request(url, headers={'User-Agent' : "Magic Browser"}) 
    html = urllib.request.urlopen(req)
    return BeautifulSoup(html, 'html.parser')

def get_images(url):
    soup = make_soup(url)
    images = [img for img in soup.findAll('img')]
    print (str(len(images)) + " images found.")
    print('Downloading images to current working directory.')
    image_links = [each.get('src') for each in images]
    for each in image_links:
        try:
            filename = each.strip().split('/')[-1].strip()
            src = urljoin(url, each)
            print('Getting: ' + filename)
            response = requests.get(src, stream=True)
            # delay to avoid corrupted previews
            time.sleep(1)
            with open(filename, 'wb') as out_file:
                shutil.copyfileobj(response.raw, out_file)
        except:
            print('  An error occured. Continuing.')
    print('Done.')

if __name__ == '__main__':
    get_images('http://www.wookmark.com')

Here I present an alternative way to detect a browser, based on feature availability.

To detect only IE, you can use this:

if(/*@cc_on!@*/false || typeof ScriptEngineMajorVersion === "function")
{
    //You are using IE>=4 (unreliable for IE11)
}
else
{
    //You are using other browser
}

To detect the most popular browsers:

if(/*@cc_on!@*/false || typeof ScriptEngineMajorVersion === "function")
{
    //You are using IE >= 4 (unreliable for IE11!!!)
}
else if(window.chrome)
{
    //You are using Chrome or Chromium
}
else if(window.opera)
{
    //You are using Opera >= 9.2
}
else if('MozBoxSizing' in document.body.style)
{
    //You are using Firefox or Firefox based >= 3.2
}
else if({}.toString.call(window.HTMLElement).indexOf('Constructor')+1)
{
    //You are using Safari >= 3.1
}
else
{
    //Unknown
}

This answer was updated because IE11 no longer supports conditional compilation (the /*@cc_on!@*/false trick).
You can check Did IE11 remove javascript conditional compilation? for more informations regarding this topic.
I've used the suggestion they presented there.
Alternatively, you can use typeof document.body.style.msTransform == "string" or document.body.style.msTransform !== window.undefined or even 'msTransform' in document.body.style.

In case you are on Ubuntu, edit the file /etc/apache2/apache2.conf (here we have an example of /var/www):

<Directory /var/www/>
        Options Indexes FollowSymLinks
        AllowOverride None
        Require all granted
</Directory>

and change it to;

<Directory /var/www/>
        Options Indexes FollowSymLinks
        AllowOverride All
        Require all granted
</Directory>

then,

sudo service apache2 restart

You may need to also do sudo a2enmod rewrite to enable module rewrite.

Try this

i was facing lot of issues when i was trying other solution...... After lot of R&D now i got solution

1. create custom_spinner.xml in layout folder and paste this code

    <?xml version="1.0" encoding="utf-8"?>
   <RelativeLayout
   xmlns:android="http://schemas.android.com/apk/res/android"
   android:orientation="vertical"
   android:layout_width="match_parent"
   android:layout_height="match_parent"
   android:background="@color/colorGray">
   <TextView
   android:id="@+id/tv_spinnervalue"
   android:layout_width="match_parent"
   android:layout_height="wrap_content"
   android:textColor="@color/colorWhite"
   android:gravity="center"
   android:layout_alignParentLeft="true"
   android:textSize="@dimen/_18dp"
   android:layout_marginTop="@dimen/_3dp"/>
   <ImageView
   android:layout_width="wrap_content"
   android:layout_height="wrap_content"
   android:layout_alignParentRight="true"
   android:background="@drawable/men_icon"/>
   </RelativeLayout>
   

2. in your activity

   Spinner spinner =(Spinner)view.findViewById(R.id.sp_colorpalates);
   String[] years = {"1996","1997","1998","1998"};
   spinner.setAdapter(new SpinnerAdapter(this, R.layout.custom_spinner, years));
   

3. create a new class of adapter

   public class SpinnerAdapter extends ArrayAdapter<String> {
   private String[] objects;
   
   public SpinnerAdapter(Context context, int textViewResourceId, String[] objects) {
       super(context, textViewResourceId, objects);
       this.objects=objects;
   }
   
   @Override
   public View getDropDownView(int position, View convertView, @NonNull ViewGroup parent) {
       return getCustomView(position, convertView, parent);
   }
   
   @NonNull
   @Override
   public View getView(int position, View convertView, @NonNull ViewGroup parent) {
       return getCustomView(position, convertView, parent);
   }
   
   private View getCustomView(final int position, View convertView, ViewGroup parent) {
       View row = LayoutInflater.from(parent.getContext()).inflate(R.layout.custom_spinner, parent, false);
       final TextView label=(TextView)row.findViewById(R.id.tv_spinnervalue);
       label.setText(objects[position]);
       return row;
   }
   }
   

The top answer is right, that the error code doesn't give you much info. One of the common causes that we saw in our team for this error code was when the query was not optimized well. A known reason was when we do an inner join with the left side table magnitudes bigger than the table on right side. Swapping these tables would usually do the trick in such cases.

If you run GPEdit.MSC you can go to Computer Configuration -> Windows Settings -> Scripts, and add startup /shutdown scripts. These can be simple batch files, or even full blown EXEs. Also you can adjust user configurations for logon and logoff scripts in this same tool. This tool is not available in WIndows XP Home.

A cleaner way to include the phpmyadmin config into apache2 is to create a new config file by:

sudo nano /etc/apache2/conf-enabled/phpmyadmin.conf

and write in it:

Include /etc/phpmyadmin/apache.conf

I saw a lot of comments about handling copy/pasting.

To piggy back off of @omeralper answer, you can add a paste event handler to the onlyNumber directive to handle copy/pasting:

 @HostListener('paste', ['$event']) onPaste(event) {
  // Don't allow pasted text that contains non-numerics
  var pastedText = (event.originalEvent || event).clipboardData.getData('text/plain');

  if (pastedText) {
    var regEx = new RegExp('^[0-9]*$');
    if (!regEx.test(pastedText)) {
      event.preventDefault();
    }
}

This will only allow content to be copy and pasted into the textbox ONLY if it is a number. That's the simplest solution. Changing the content of the clipboard to remove non-numerics is a lot more complicated and might not be worth it.

To get pasted text from IE you can use the following:

window.clipboardData.getData('Text');

By omitting all parts of the head, the loop can also become infinite:

for (;;) {}

These examples work fine:

nohup sh prog.sh proglog.log 2>&1 &

For loop you can use like this :

for i in {1..10}; do sh prog.sh; sleep 1; done prog.log 2>&1 &

It works in background and does not show any output.

I was also facing the same issue, Everything was normal all the rights were given to the user and for folder as well. After many research i found that the wwwroot (Source code folder) was shared with some other user. I stopped sharing and it worked like a charm.

For Mozilla

input[type=number] { 
    -moz-appearance: textfield;
    appearance: textfield;
    margin: 0; 
}

For Chrome

input[type=number]::-webkit-inner-spin-button, 
input[type=number]::-webkit-outer-spin-button { 
      -webkit-appearance: none; 
      margin: 0; 
}

Since all answers are using COUNT(), you can also use MAX() to get the number of columns in a specific table as

SELECT MAX(ORDINAL_POSITION) NumberOfColumnsInTable
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_CATALOG = 'YourDatabaseNameHere'
      AND 
      TABLE_SCHEMA = 'YourSchemaNameHere'
      AND
      TABLE_NAME = 'YourTableNameHere';

See The INFORMATION_SCHEMA COLUMNS Table

I always used:

if [ "x$STATE" == "x" ]; then echo "Need to set State"; exit 1; fi

Not that much more concise, I'm afraid.

Under CSH you have $?STATE.

Right click the database itself, Tasks -> Generate Scripts...

Then follow the wizard.

For SSMS2008+, if you want to also export the data, on the "Set Scripting Options" step, select the "Advanced" button and change "Types of data to script" from "Schema Only" to "Data Only" or "Schema and Data".

OK, think I can explain better what I've put in comments :). So, basically, you can see both those as the same, though DAO is a more flexible pattern than Repository. If you want to use both, you would use the Repository in your DAO-s. I'll explain each of them below:

REPOSITORY:

It's a repository of a specific type of objects - it allows you to search for a specific type of objects as well as store them. Usually it will ONLY handle one type of objects. E.g. AppleRepository would allow you to do AppleRepository.findAll(criteria) or AppleRepository.save(juicyApple). Note that the Repository is using Domain Model terms (not DB terms - nothing related to how data is persisted anywhere).

A repository will most likely store all data in the same table, whereas the pattern doesn't require that. The fact that it only handles one type of data though, makes it logically connected to one main table (if used for DB persistence).

DAO - data access object (in other words - object used to access data)

A DAO is a class that locates data for you (it is mostly a finder, but it's commonly used to also store the data). The pattern doesn't restrict you to store data of the same type, thus you can easily have a DAO that locates/stores related objects.

E.g. you can easily have UserDao that exposes methods like

Collection<Permission> findPermissionsForUser(String userId)
User findUser(String userId)
Collection<User> findUsersForPermission(Permission permission)

All those are related to User (and security) and can be specified under then same DAO. This is not the case for Repository.

Finally

Note that both patterns really mean the same (they store data and they abstract the access to it and they are both expressed closer to the domain model and hardly contain any DB reference), but the way they are used can be slightly different, DAO being a bit more flexible/generic, while Repository is a bit more specific and restrictive to a type only.

As of Matplotlib 2.0, there is a reversed() method for ListedColormap and LinearSegmentedColorMap objects, so you can just do

cmap_reversed = cmap.reversed()

Here is the documentation.