Joins in update statements are non-standard and not supported by all vendors. What you're trying to do can be accomplished with a sub-select:

update
  file1
set
  firstfield = (select 'stuff' concat something from file2 where substr(file1.field1, 10, 20) = substr(file2.xxx,1,10) )
where
  file1.foo like 'BLAH%'

import com.google.common.base

if(!Strings.isNullOrEmpty(String str)) {
   // Do your stuff here 
}

As stated in an article by Slicehost:

User setup

So let's start by adding the main user to the Apache user group:

sudo usermod -a -G www-data demo

That adds the user 'demo' to the 'www-data' group. Do ensure you use both the -a and the -G options with the usermod command shown above.

You will need to log out and log back in again to enable the group change.

Check the groups now:

groups
...
# demo www-data

So now I am a member of two groups: My own (demo) and the Apache group (www-data).

Folder setup

Now we need to ensure the public_html folder is owned by the main user (demo) and is part of the Apache group (www-data).

Let's set that up:

sudo chgrp -R www-data /home/demo/public_html

As we are talking about permissions I'll add a quick note regarding the sudo command: It's a good habit to use absolute paths (/home/demo/public_html) as shown above rather than relative paths (~/public_html). It ensures sudo is being used in the correct location.

If you have a public_html folder with symlinks in place then be careful with that command as it will follow the symlinks. In those cases of a working public_html folder, change each folder by hand.

Setgid

Good so far, but remember the command we just gave only affects existing folders. What about anything new?

We can set the ownership so anything new is also in the 'www-data' group.

The first command will change the permissions for the public_html directory to include the "setgid" bit:

sudo chmod 2750 /home/demo/public_html

That will ensure that any new files are given the group 'www-data'. If you have subdirectories, you'll want to run that command for each subdirectory (this type of permission doesn't work with '-R'). Fortunately new subdirectories will be created with the 'setgid' bit set automatically.

If we need to allow write access to Apache, to an uploads directory for example, then set the permissions for that directory like so:

sudo chmod 2770 /home/demo/public_html/domain1.com/public/uploads

The permissions only need to be set once as new files will automatically be assigned the correct ownership.

Dir

Use the dir command. Type in dir /? for help and options.

dir /a:d /b

Redirect

Then use a redirect to save the list to a file.

> list.txt

Together

dir /a:d /b > list.txt

This will output just the names of the directories. if you want the full path of the directories use this below.

Full Path

for /f "delims=" %%D in ('dir /a:d /b') do echo %%~fD

Alternative

other method just using the for command. See for /? for help and options. This can output just the name %%~nxD or the full path %%~fD

for /d %%D in (*) do echo %%~fD

Notes

To use these commands directly on the command line, change the double percent signs to single percent signs. %% to %

To redirect the for methods, just add the redirect after the echo statements. Use the double arrow >> redirect here to append to the file, else only the last statement will be written to the file due to overwriting all the others.

... echo %%~fD>> list.txt

var countries = ['United States', 'Canada', 'Argentina', 'Armenia'];
var cList = $('ul.mylist')
$.each(countries, function(i)
{
    var li = $('<li/>')
        .addClass('ui-menu-item')
        .attr('role', 'menuitem')
        .appendTo(cList);
    var aaa = $('<a/>')
        .addClass('ui-all')
        .text(countries[i])
        .appendTo(li);
});

Highlight duplicates (in column C):

=COUNTIF(C:C, C1) > 1

Explanation: The C1 here doesn't refer to the first row in C. Because this formula is evaluated by a conditional format rule, instead, when the formula is checked to see if it applies, the C1 effectively refers to whichever row is currently being evaluated to see if the highlight should be applied. (So it's more like INDIRECT(C &ROW()), if that means anything to you!). Essentially, when evaluating a conditional format formula, anything which refers to row 1 is evaluated against the row that the formula is being run against. (And yes, if you use C2 then you asking the rule to check the status of the row immediately below the one currently being evaluated.)

So this says, count up occurences of whatever is in C1 (the current cell being evaluated) that are in the whole of column C and if there is more than 1 of them (i.e. the value has duplicates) then: apply the highlight (because the formula, overall, evaluates to TRUE).

Highlight the first duplicate only:

=AND(COUNTIF(C:C, C1) > 1, COUNTIF(C$1:C1, C1) = 1)

Explanation: This only highlights if both of the COUNTIFs are TRUE (they appear inside an AND()).

The first term to be evaluated (the COUNTIF(C:C, C1) > 1) is the exact same as in the first example; it's TRUE only if whatever is in C1 has a duplicate. (Remember that C1 effectively refers to the current row being checked to see if it should be highlighted).

The second term (COUNTIF(C$1:C1, C1) = 1) looks similar but it has three crucial differences:

It doesn't search the whole of column C (like the first one does: C:C) but instead it starts the search from the first row: C$1 (the $ forces it to look literally at row 1, not at whichever row is being evaluated).

And then it stops the search at the current row being evaluated C1.

Finally it says = 1.

So, it will only be TRUE if there are no duplicates above the row currently being evaluated (meaning it must be the first of the duplicates).

Combined with that first term (which will only be TRUE if this row has duplicates) this means only the first occurrence will be highlighted.

Highlight the second and onwards duplicates:

=AND(COUNTIF(C:C, C1) > 1, NOT(COUNTIF(C$1:C1, C1) = 1), COUNTIF(C1:C, C1) >= 1)

Explanation: The first expression is the same as always (TRUE if the currently evaluated row is a duplicate at all).

The second term is exactly the same as the last one except it's negated: It has a NOT() around it. So it ignores the first occurence.

Finally the third term picks up duplicates 2, 3 etc. COUNTIF(C1:C, C1) >= 1 starts the search range at the currently evaluated row (the C1 in the C1:C). Then it only evaluates to TRUE (apply highlight) if there is one or more duplicates below this one (and including this one): >= 1 (it must be >= not just > otherwise the last duplicate is ignored).

For those experiencing this error on CI/CD, adding the line below worked for me on my GitHub Actions CI/CD workflow right after running pip install pyflakes diff-cover:

git fetch origin master:refs/remotes/origin/master

This is a snippet of the solution from the diff-cover github repo:

Solution: diff-cover matches source files in the coverage XML report with source files in the git diff. For this reason, it's important that the relative paths to the files match. If you are using coverage.py to generate the coverage XML report, then make sure you run diff-cover from the same working directory.

I got the solution on the links below. It is a documented diff-cover error.

https://diff-cover.readthedocs.io/en/latest//README.html https://github.com/Bachmann1234/diff_cover/blob/master/README.rst

Hope this helps :-).

Get rid of the position:relative; and replace it with float:left; and float:right;.

Example in jsfiddle: http://jsfiddle.net/d9fHP/1/

        <html>
<title>
Website Title </title>
<div id="the whole thing" style="float:left; height:100%; width:100%">
    <div id="leftThing" style="float:left; width:25%; background-color:blue;">
         Left Side Menu
    </div>
    <div id="content" style="float:left; width:50%; background-color:green;">
         Random Content
    </div>
    <div id="rightThing" style="float:right; width:25%; background-color:yellow;">
         Right Side Menu
    </div>
</div>
</html>?

Not sure if this is already answered, but if you want only a table in a figure window, then you can hide the axes:

fig, ax = plt.subplots()

# Hide axes
ax.xaxis.set_visible(False) 
ax.yaxis.set_visible(False)

# Table from Ed Smith answer
clust_data = np.random.random((10,3))
collabel=("col 1", "col 2", "col 3")
ax.table(cellText=clust_data,colLabels=collabel,loc='center')

$myVar = str_replace('/', '', $_SERVER[REQUEST_URI]);

libs/images/index.php
Result: images

You can use white-space: nowrap; to define this behaviour:

// HTML:

.nowrap {_x000D_
  white-space: nowrap ;_x000D_
}

<p>_x000D_
      <span class="nowrap">How do I wrap this line of text</span>_x000D_
      <span class="nowrap">- asked by Peter 2 days ago</span>_x000D_
    </p>

// CSS:
.nowrap {
  white-space: nowrap ;
}

You can also use a fadeIn/FadeOut Combo, too....

$('.test').bind('click', function(){
    $('.div1').fadeIn(500); 
    $('.div2').fadeOut(500);
    $('.div3').fadeOut(500);
    return false;
});

button { 
  width:1000px; 
} 

or even

 button { 
    width:1000px !important
 } 

If thats what you mean

This should work:

SELECT model, date FROM doc GROUP BY model ORDER BY date DESC

It just sort the dates from last to first and by grouping it only grabs the first one.

You can simply check out a new branch, and then commit:

git checkout -b my_new_branch
git commit

Checking out the new branch will not discard your changes.

GROUP BY YEAR(record_date), MONTH(record_date)

Check out the date and time functions in MySQL.

I use code below:

var fileSplit = filename.split('.');
var fileExt = '';
if (fileSplit.length > 1) {
fileExt = fileSplit[fileSplit.length - 1];
} 
return fileExt;

You can try writing into the Documents folder. Here is a "debug" function I did for the debugging needs of my project:

Private Sub writeDebug(ByVal x As String)
    Dim path As String = System.Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments)
    Dim FILE_NAME As String = path & "\mydebug.txt"
    MsgBox(FILE_NAME)
    If System.IO.File.Exists(FILE_NAME) = False Then
        System.IO.File.Create(FILE_NAME).Dispose()
    End If
    Dim objWriter As New System.IO.StreamWriter(FILE_NAME, True)
    objWriter.WriteLine(x)
    objWriter.Close()
End Sub

There are more standard folders you can access through the "SpecialFolder" object.

sudoPassword = 'mypass'
command = 'mount -t vboxsf myfolder /home/myuser/myfolder'
p = os.system('echo %s|sudo -S %s' % (sudoPassword, command))

Try this and let me know if it works. :-)

And this one:

os.popen("sudo -S %s"%(command), 'w').write('mypass')

The first step is figuring out what the error actually is. In order to do this expand your MsBuild output to be diagnostic. This will reveal the actual command executed and hopefully the full error message as well

• Tools -> Options
• Projects and Solutions -> Build and Run
• Change "MsBuild project build output verbosity" to "Diagnostic".

In mac I did this

• type your comment and press command + D to select the text
• and then press Alt + Command + / to comment out the selected text.

The issue could be with the response you are receiving from back-end. If it was working fine on the server then the problem could be with the response headers. Check the Access-Control-Allow-Origin (ACAO) in the response headers. Usually react's fetch API will throw fail to fetch even after receiving response when the response headers' ACAO and the origin of request won't match.

Use json_decode($json_string, TRUE) function to convert the JSON object to an array.

Example:

$json_string   = '{"a":1,"b":2,"c":3,"d":4,"e":5}';

$my_array_data = json_decode($json_string, TRUE);

NOTE: The second parameter will convert decoded JSON string into an associative array.

===========

Output:

var_dump($my_array_data);

array(5) {

    ["a"] => int(1)
    ["b"] => int(2)
    ["c"] => int(3)
    ["d"] => int(4)
    ["e"] => int(5)
}

for i in `seq 1 20`; do curl http://url; done

Or if you want to get timing information back, use ab:

ab -n 20 http://url/

Member functions of the form

operator TypeName()

are conversion operators. They allow objects of the class type to be used as if they were of type TypeName and when they are, they are converted to TypeName using the conversion function.

In this particular case, operator bool() allows an object of the class type to be used as if it were a bool. For example, if you have an object of the class type named obj, you can use it as

if (obj)

This will call the operator bool(), return the result, and use the result as the condition of the if.

It should be noted that operator bool() is A Very Bad Idea and you should really never use it. For a detailed explanation as to why it is bad and for the solution to the problem, see "The Safe Bool Idiom."

(C++0x, the forthcoming revision of the C++ Standard, adds support for explicit conversion operators. These will allow you to write a safe explicit operator bool() that works correctly without having to jump through the hoops of implementing the Safe Bool Idiom.)

Determining of root cause is not an issue since Go 1.8; field name now is shown in the error message:

json: cannot unmarshal object into Go struct field Comment.author of type string

Try getting Spring to inject it, assuming you're using Spring as a dependency-injection framework.

In your class, do something like this:

public void setSqlResource(Resource sqlResource) {
    this.sqlResource = sqlResource;
}

And then in your application context file, in the bean definition, just set a property:

<bean id="someBean" class="...">
    <property name="sqlResource" value="classpath:com/somecompany/sql/sql.txt" />
</bean>

And Spring should be clever enough to load up the file from the classpath and give it to your bean as a resource.

You could also look into PropertyPlaceholderConfigurer, and store all your SQL in property files and just inject each one separately where needed. There are lots of options.

$header3 = @("Field_1","Field_2","Field_3","Field_4","Field_5")     

Import-Csv $fileName -Header $header3 -Delimiter "`t" | select -skip 3 | Foreach-Object {

    $record = $indexName 
    foreach ($property in $_.PSObject.Properties){

        #doSomething $property.Name, $property.Value

            if($property.Name -like '*TextWrittenAsNumber*'){

                $record = $record + "," + '"' + $property.Value + '"' 
            }
            else{
                $record = $record + "," + $property.Value 
            }                           
    }               

        $array.add($record) | out-null  
        #write-host $record                         
}

It runs Java compiled code, it can maintain database connection pools, it can log errors of various types. I'd call it an application server, in fact I do. In our environment we have Apache as the webserver fronting a number of different application servers, including Tomcat and Coldfusion, and others.

SELECT * 
FROM table 
WHERE date BETWEEN 
    ADDDATE(LAST_DAY(DATE_SUB(NOW(),INTERVAL 2 MONTH)), INTERVAL 1 DAY) 
    AND DATE_SUB(NOW(),INTERVAL 1 MONTH);

See the docs for info on DATE_SUB, ADDDATE, LAST_DAY and other useful datetime functions.

CryptoJS is a crypto library which can generate md5 hash among others:

Usage with Script tag:

<script src="https://cdnjs.cloudflare.com/ajax/libs/crypto-js/4.0.0/core.min.js"></script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/crypto-js/3.1.9-1/md5.js"></script>
<script>
   var hash = CryptoJS.MD5("Message");
   alert(hash);
</script>

Alternatively with ES6:

npm install crypto-js

import MD5 from "crypto-js/md5";
console.log(MD5("Message").toString());

You can also use modular imports:

var MD5 = require("crypto-js/md5");
console.log(MD5("Message").toString());

Github: https://github.com/brix/crypto-js

CDN: https://cdnjs.com/libraries/crypto-js

The heart of a state machine is the transition table, which takes a state and a symbol (what you're calling an event) to a new state. That's just a two-index array of states. For sanity and type safety, declare the states and symbols as enumerations. I always add a "length" member in some way (language-specific) for checking array bounds. When I've hand-coded FSM's, I format the code in row and column format with whitespace fiddling. The other elements of a state machine are the initial state and the set of accepting states. The most direct implementation of the set of accepting states is an array of booleans indexed by the states. In Java, however, enumerations are classes, and you can specify an argument "accepting" in the declaration for each enumerated value and initialize it in the constructor for the enumeration.

For the machine type, you can write it as a generic class. It would take two type arguments, one for the states and one for the symbols, an array argument for the transition table, a single state for the initial. The only other detail (though it's critical) is that you have to call Enum.ordinal() to get an integer suitable for indexing the transition array, since you there's no syntax for directly declaring an array with a enumeration index (though there ought to be).

To preempt one issue, EnumMap won't work for the transition table, because the key required is a pair of enumeration values, not a single one.

enum State {
    Initial( false ),
    Final( true ),
    Error( false );
    static public final Integer length = 1 + Error.ordinal();

    final boolean accepting;

    State( boolean accepting ) {
        this.accepting = accepting;
    }
}

enum Symbol {
    A, B, C;
    static public final Integer length = 1 + C.ordinal();
}

State transition[][] = {
    //  A               B               C
    {
        State.Initial,  State.Final,    State.Error
    }, {
        State.Final,    State.Initial,  State.Error
    }
};

If the src is already set, then the event is firing in the cached case, before you even get the event handler bound. To fix this, you can loop through checking and triggering the event based off .complete, like this:

$("img").one("load", function() {
  // do stuff
}).each(function() {
  if(this.complete) {
      $(this).load(); // For jQuery < 3.0 
      // $(this).trigger('load'); // For jQuery >= 3.0 
  }
});

Note the change from .bind() to .one() so the event handler doesn't run twice.

The statement you're executing is valid. The error seems to mean that Toad is including the trailing semicolon as part of the command, which does cause an ORA-00911 when it's included as part of a statement - since it is a statement separator in the client, not part of the statement itself.

It may be the following commented-out line that is confusing Toad (as described here); or it might be because you're trying to run everything as a single statement, in which case you can try to use the run script command (F9) instead of run statement (F5).

Just removing the commented-out line makes the problem go away, but if you also saw this with an actual commit then it's likely to be that you're using the wrong method to run the statements.

There is a bit more information about how Toad parses the semicolons in a comment on this related question, but I'm not familiar enough with Toad to go into more detail.

I had a similar problem because of copy paste from another page, what I got:

<form id="form1" runat="server">
    ...
    <form id="form2" runat="server">
    ....
    </form>
</form>

I just removed form with id="form2" inside form with id="form1" and issue gone. This could be not your problem but it could be something similar.

As of PostgreSQL 9.3, you can use the command pg_isready to determine the connection status of a PostgreSQL server.

From the docs:

pg_isready returns 0 to the shell if the server is accepting connections normally, 1 if the server is rejecting connections (for example during startup), 2 if there was no response to the connection attempt, and 3 if no attempt was made (for example due to invalid parameters).

My favorite cross platform method for finding the current URL is:

$url = (isset($_SERVER['HTTPS']) ? "https" : "http") . "://$_SERVER[HTTP_HOST]$_SERVER[REQUEST_URI]";

Below is what i did to hide some Id element when screen size is below 768px, and show up when is above 768px. It works great.

var screensize= $( window ).width();

if(screensize<=768){
        if($('#column-d0f6e77c699556473e4ff2967e9c0251').length>0)
            {
                $('#column-d0f6e77c699556473e4ff2967e9c0251').css('display','none');
            }
}
else{
        if($('#column-d0f6e77c699556473e4ff2967e9c0251').length>0)
            {
                $('#column-d0f6e77c699556473e4ff2967e9c0251').removeAttr( "style" );
            }

}
changething = function(screensize){
        if(screensize<=768){
            if($('#column-d0f6e77c699556473e4ff2967e9c0251').length>0)
            {
                $('#column-d0f6e77c699556473e4ff2967e9c0251').css('display','none');
            }
        }
        else{
        if($('#column-d0f6e77c699556473e4ff2967e9c0251').length>0)
            {
                $('#column-d0f6e77c699556473e4ff2967e9c0251').removeAttr( "style" );
            }

        }
}
$( window ).resize(function() {
 var screensize= $( window ).width();
  changething(screensize);
});

Just so you know...

Adding to the litany of woes with these classes, there is a rather interesting bug that's worth sharing.

I'm using a ViewPager to navigate a tree of items (select an item and the view pager animates scrolling to the right, and the next branch appears, navigate back, and the ViewPager scrolls in the opposite direction to return to the previous node).

The problem arises when I push and pop fragments off the end of the FragmentStatePagerAdapter. It's smart enough to notice that the items change, and smart enough to create and replace a fragment when the item has changed. But not smart enough to discard the fragment state, or smart enough to trim the internally saved fragment states when the adapter size changes. So when you pop an item, and push a new one onto the end, the fragment for the new item gets the saved state of the fragment for the old item, which caused absolute havoc in my code. My fragments carry data that may require a lot of work to refetch from the internet, so not saving state really wasn't an option.

I don't have a clean workaround. I used something like this:

  public void onSaveInstanceState(Bundle outState) {
    IFragmentListener listener = (IFragmentListener)getActivity();
    if (listener!= null)
    {
        if (!listener.isStillInTheAdapter(this.getAdapterItem()))
        {
            return; // return empty state.
        }

    }
    super.onSaveInstanceState(outState);

    // normal saving of state for flips and 
    // paging out of the activity follows
    ....
  }

An imperfect solution because the new fragment instance still gets a savedState Bundle, but at least it doesn't carry stale data.

According to official Android information about dumpsys:

The dumpsys tool runs on the device and provides information about the status of system services.

To get a list of available services use

adb shell dumpsys -l

If you are grouping by some other value, then instead of what you have,

write it as

Sum(CASE WHEN col1 > col2 THEN SUM(col3*col4) ELSE 0 END) as SumSomeProduct

If, otoh, you want to group By the internal expression, (col3*col4) then

write the group By to match the expression w/o the SUM...

Select Sum(Case When col1 > col2 Then col3*col4 Else 0 End) as SumSomeProduct
From ...

Group By Case When col1 > col2 Then col3*col4 Else 0 End 

Finally, if you want to group By the actual aggregate

Select SumSomeProduct, Count(*), <other aggregate functions>
From (Select <other columns you are grouping By>, 
      Sum(Case When col1 > col2 
          Then col3*col4 Else 0 End) as SumSomeProduct
      From Table
      Group By <Other Columns> ) As Z
Group by SumSomeProduct

Just simply use:

var update_pizza = function () {
     $("#pizza_kind").prop("disabled", !$('#pizza').prop('checked'));
};

update_pizza();
$("#pizza").change(update_pizza);

DEMO ?

1. The point of using CDN is that it is faster, first of all, because it is a distributed network, but secondly, because the static files are being cached by the browsers and chances are high that, for example, the CDN's jquery library that your site uses had already been downloaded by the user's browser, and therefore the file had been cached, and therefore no unnecessary download is taking place. That being said, it is still a good idea to provide a fallback.

   Now, the point of bootstrap's npm package

   is that it provides bootstrap's javascript file as a module. As has been mentioned above, this makes it possible to require it using browserify, which is the most likely use case and, as I understand it, the main reason for bootstrap being published on npm.

2. How to use it

   Imagine the following project structure:

   project
   |-- node_modules
   |-- public
   |   |-- css
   |   |-- img
   |   |-- js
   |   |-- index.html
   |-- package.json
   
   

In your index.html you can reference both css and js files like this:

<link rel="stylesheet" href="../node_modules/bootstrap/dist/css/bootstrap.min.css">
<script src="../node_modules/bootstrap/dist/js/bootstrap.min.js"></script>

Which is the simplest way, and correct for the .css files. But it is much better to include the bootstrap.js file like this somewhere in your public/js/*.js files:

var bootstrap = require('bootstrap');

And you include this code only in those javascript files where you actually need bootstrap.js. Browserify takes care of including this file for you.

Now, the drawback is that you now have your front-end files as node_modules dependencies, and the node_modules folder is usually not checked in with git. I think this is the most controversial part, with many opinions and solutions.

UPDATE March 2017

Almost two years have passed since I wrote this answer and an update is in place.

Now the generally accepted way is to use a bundler like webpack (or another bundler of choice) to bundle all your assets in a build step.

Firstly, it allows you to use commonjs syntax just like browserify, so to include bootstrap js code in your project you do the same:

const bootstrap = require('bootstrap');

As for the css files, webpack has so called "loaders". They allow you write this in your js code:

require('bootstrap/dist/css/bootstrap.css');

and the css files will be "magically" included in your build. They will be dynamically added as <style /> tags when your app runs, but you can configure webpack to export them as a separate css file. You can read more about that in webpack's documentation.

In conclusion.

1. You should "bundle" your app code with a bundler
2. You shouldn't commit neither node_modules nor the dynamically built files to git. You can add a build script to npm which should be used to deploy files on server. Anyway, this can be done in different ways depending on your preferred build process.

You can overload the String prototype with a removePrefix function:

String.prototype.removePrefix = function (prefix) {
    const hasPrefix = this.indexOf(prefix) === 0;
    return hasPrefix ? this.substr(prefix.length) : this.toString();
};

usage:

const domain = "www.test.com".removePrefix("www."); // test.com

git ls-files lists the files in the current directory. If you want to list untracked files from anywhere in the tree, this might work better:

git ls-files -o --exclude-standard $(git rev-parse --show-toplevel)

To add all untracked files in the tree:

git ls-files -o --exclude-standard $(git rev-parse --show-toplevel) | xargs git add

Get fields where a timestamp is greater than date in postgresql:

SELECT * from yourtable 
WHERE your_timestamp_field > to_date('05 Dec 2000', 'DD Mon YYYY');

Subtract minutes from timestamp in postgresql:

SELECT * from yourtable 
WHERE your_timestamp_field > current_timestamp - interval '5 minutes'

Subtract hours from timestamp in postgresql:

SELECT * from yourtable 
WHERE your_timestamp_field > current_timestamp - interval '5 hours'

In order to parse a java.util.Date object you have to convert it to String first using your own format.

inActiveDate = format1.parse(  format1.format(date)  );

But I believe you are being redundant here.

A cursor is a SELECTed window on an Oracle table, this means a group of records present in an Oracle table, and satisfying certain conditions. A cursor can SELECT all the content of a table, too. With a cursor you can manipulate Oracle columns, aliasing them in the result. An example of implicit cursor is the following:

BEGIN
   DECLARE
      CURSOR C1
      IS
         SELECT DROPPED_CALLS FROM ALARM_UMTS;

      C1_REC   C1%ROWTYPE;
   BEGIN
      FOR C1_REC IN C1
      LOOP
         DBMS_OUTPUT.PUT_LINE ('DROPPED CALLS: ' || C1_REC.DROPPED_CALLS);
      END LOOP;
   END;
END;
/

With FOR ... LOOP... END LOOP you open and close the cursor authomatically, when the records of the cursor have been all analyzed.

An example of explicit cursor is the following:

BEGIN
   DECLARE
      CURSOR C1
      IS
         SELECT DROPPED_CALLS FROM ALARM_UMTS;

      C1_REC   C1%ROWTYPE;
   BEGIN
      OPEN c1;

      LOOP
         FETCH c1 INTO c1_rec;

         EXIT WHEN c1%NOTFOUND;

         DBMS_OUTPUT.PUT_LINE ('DROPPED CALLS: ' || C1_REC.DROPPED_CALLS);
      END LOOP;

      CLOSE c1;
   END;
END;
/

In the explicit cursor you open and close the cursor in an explicit way, checking the presence of records and stating an exit condition.

Use this code

using System.Threading;
// ...
Thread.Sleep(50);

sudo debconf-set-selections <<< 'mysql-server mysql-server/root_password password your_password'
sudo debconf-set-selections <<< 'mysql-server mysql-server/root_password_again password your_password'
sudo apt-get -y install mysql-server

For specific versions, such as mysql-server-5.6, you'll need to specify the version in like this:

sudo debconf-set-selections <<< 'mysql-server-5.6 mysql-server/root_password password your_password'
sudo debconf-set-selections <<< 'mysql-server-5.6 mysql-server/root_password_again password your_password'
sudo apt-get -y install mysql-server-5.6

For mysql-community-server, the keys are slightly different:

sudo debconf-set-selections <<< 'mysql-community-server mysql-community-server/root-pass password your_password'
sudo debconf-set-selections <<< 'mysql-community-server mysql-community-server/re-root-pass password your_password'
sudo apt-get -y install mysql-community-server

Replace your_password with the desired root password. (it seems your_password can also be left blank for a blank root password.)

If your shell doesn't support here-strings (zsh, ksh93 and bash support them), use:

echo ... | sudo debconf-set-selections 

If you have loads of re-directs to create, having loads of virtual directories over the places is a nightmare to maintain. You could try using ISAPI redirect an IIS extension. Then all you re-directs are managed in one place.

http://www.isapirewrite.com/docs/

It allows also you to match patterns based on reg ex expressions etc. I've used where I've had to re-direct 100's of pages and its saved a lot of time.

Building on Allison and Deepak's answer, I started using logrus and really like it:

var log = logrus.New()

func init() {

    // log to console and file
    f, err := os.OpenFile("crawler.log", os.O_RDWR|os.O_CREATE|os.O_APPEND, 0666)
    if err != nil {
        log.Fatalf("error opening file: %v", err)
    }
    wrt := io.MultiWriter(os.Stdout, f)

    log.SetOutput(wrt)
}

I have a defer f.Close() in the main function

After reading the additional details, I agree with robcthegeek: raise an event. Create a custom EventArgs and pass the neccessary parameters through it.

Yes. You can use Process.Start to launch an executable, including a console application.

If you need to read the output from the application, you may need to read from it's StandardOutput stream in order to get anything printed from the application you launch.

I've noticed bizarre behavior with Eclipse version 4.2.1 delivering me this error:

String cannot be resolved to a variable

With this Java code:

if (true)
    String my_variable = "somevalue";
    System.out.println("foobar");

You would think this code is very straight forward, the conditional is true, we set my_variable to somevalue. And it should print foobar. Right?

Wrong, you get the above mentioned compile time error. Eclipse is trying to prevent you from making a mistake by assuming that both statements are within the if statement.

If you put braces around the conditional block like this:

if (true){
    String my_variable = "somevalue"; }
    System.out.println("foobar");

Then it compiles and runs fine. Apparently poorly bracketed conditionals are fair game for generating compile time errors now.

Here's the complete solution if you want to implement the wifi hotspot feature programmatically in your android app.

SOLUTION FOR API < 26:

For devices < API 26. There is no public API by Android for this purpose. So, in order to work with those APIs you've to access private APIs through reflection. It is not recommended but if you've no other options left, then here's a trick.

First of all, you need to have this permission in your manifest,

  <uses-permission  
  android:name="android.permission.WRITE_SETTINGS"  
  tools:ignore="ProtectedPermissions"/>

  <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE"/>
  <uses-permission android:name="android.permission.CHANGE_WIFI_STATE"/>
  <uses-permission android:name="android.permission.ACCESS_WIFI_STATE"/>

Here's how you can ask it on run-time:

 private boolean showWritePermissionSettings() {    
if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M  
    && Build.VERSION.SDK_INT < Build.VERSION_CODES.O) { 
  if (!Settings.System.canWrite(this)) {    
    Log.v("DANG", " " + !Settings.System.canWrite(this));   
    Intent intent = new Intent(android.provider.Settings.ACTION_MANAGE_WRITE_SETTINGS); 
    intent.setData(Uri.parse("package:" + this.getPackageName()));  
    intent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK); 
    this.startActivity(intent); 
    return false;   
  } 
}   
return true; //Permission already given 
}

You can then access the setWifiEnabled method through reflection. This returns true if the action you asked for is being process correctly i.e. enabling/disabling hotspot.

     public boolean setWifiEnabled(WifiConfiguration wifiConfig, boolean enabled) { 
 WifiManager wifiManager;
try {   
  if (enabled) { //disables wifi hotspot if it's already enabled    
    wifiManager.setWifiEnabled(false);  
  } 

   Method method = wifiManager.getClass()   
      .getMethod("setWifiApEnabled", WifiConfiguration.class, boolean.class);   
  return (Boolean) method.invoke(wifiManager, wifiConfig, enabled); 
} catch (Exception e) { 
  Log.e(this.getClass().toString(), "", e); 
  return false; 
}   
}

You can also get the wificonfiguration of your hotspot through reflection. I've answered that method for this question on StackOverflow.

P.S: If you don't want to turn on hotspot programmatically, you can start this intent and open the wifi settings screen for user to turn it on manually.

SOLUTION FOR API >= 26:

Finally, android released an official API for versions >= Oreo. You can just use the public exposed API by android i.e. startLocalOnlyHotspot

It turns on a local hotspot without internet access. Which thus can be used to host a server or transfer files.

It requires Manifest.permission.CHANGE_WIFI_STATE and ACCESS_FINE_LOCATION permissions.

Here's a simple example of how you can turn on hotspot using this API.

private WifiManager wifiManager;
WifiConfiguration currentConfig;
WifiManager.LocalOnlyHotspotReservation hotspotReservation;

The method to turn on hotspot:

@RequiresApi(api = Build.VERSION_CODES.O)
public void turnOnHotspot() {

      wifiManager.startLocalOnlyHotspot(new WifiManager.LocalOnlyHotspotCallback() {

        @Override
        public void onStarted(WifiManager.LocalOnlyHotspotReservation reservation) {
          super.onStarted(reservation);
          hotspotReservation = reservation;
          currentConfig = hotspotReservation.getWifiConfiguration();

          Log.v("DANG", "THE PASSWORD IS: "
              + currentConfig.preSharedKey
              + " \n SSID is : "
              + currentConfig.SSID);

          hotspotDetailsDialog();

        }

        @Override
        public void onStopped() {
          super.onStopped();
          Log.v("DANG", "Local Hotspot Stopped");
        }

        @Override
        public void onFailed(int reason) {
          super.onFailed(reason);
          Log.v("DANG", "Local Hotspot failed to start");
        }
      }, new Handler());
    }
`

Here's how you can get details of the locally created hotspot

private void hotspotDetaisDialog()
{

    Log.v(TAG, context.getString(R.string.hotspot_details_message) + "\n" + context.getString(
              R.string.hotspot_ssid_label) + " " + currentConfig.SSID + "\n" + context.getString(
              R.string.hotspot_pass_label) + " " + currentConfig.preSharedKey);

}

If it throws, a security exception even after giving the required permissions then you should try enabling your location using GPS. Here's the solution.

Recently, I've developed a demo app called Spotserve. That turns on wifi hotspot for all devices with API>=15 and hosts a demo server on that hotspot. You can check that for more details. Hope this helps!

Pattern for the Valid Mobile number pattern('^((\+91-?)|0)?[0-9]{10}$')

Pattern for accept only number from text box pattern('[0-9]*')

patter for accept only number with specific number e.g: Pincode. pattern('^[0-9]{5}$')

I was getting the same error message in VS 2012, but was not running as Administrator. When I ran the app as administrator, I got a different and slightly more helpful message (which I was able to figure out). HTH

SELECT DATEADD(day,-30,date) AS before30d 
FROM...

But it is strongly recommended to keep date in datetime column, not varchar.

@momo's answer for Apache HttpClient, version 4.3.1 or later. I'm using JSON-Java to build my JSON object:

JSONObject json = new JSONObject();
json.put("someKey", "someValue");    

CloseableHttpClient httpClient = HttpClientBuilder.create().build();

try {
    HttpPost request = new HttpPost("http://yoururl");
    StringEntity params = new StringEntity(json.toString());
    request.addHeader("content-type", "application/json");
    request.setEntity(params);
    httpClient.execute(request);
// handle response here...
} catch (Exception ex) {
    // handle exception here
} finally {
    httpClient.close();
}

The problem is that, even if you see the error, your return false affects the callback of the .each() method ... so, even if there is an error, you reach the line

$('form').unbind('submit').submit();

and the form is submitted.

You should create a variable, validated, for example, and set it to true. Then, in the callback, instead of return false, set validated = false.

Finally...

if (validated) $('form').unbind('submit').submit();

This way, only if there are no errors will the form be submitted.

Try This with Capital Letters, Small Letters, Numeric(s) and Special Characters

function generatePassword($_len) {

    $_alphaSmall = 'abcdefghijklmnopqrstuvwxyz';            // small letters
    $_alphaCaps  = strtoupper($_alphaSmall);                // CAPITAL LETTERS
    $_numerics   = '1234567890';                            // numerics
    $_specialChars = '`~!@#$%^&*()-_=+]}[{;:,<.>/?\'"\|';   // Special Characters

    $_container = $_alphaSmall.$_alphaCaps.$_numerics.$_specialChars;   // Contains all characters
    $password = '';         // will contain the desired pass

    for($i = 0; $i < $_len; $i++) {                                 // Loop till the length mentioned
        $_rand = rand(0, strlen($_container) - 1);                  // Get Randomized Length
        $password .= substr($_container, $_rand, 1);                // returns part of the string [ high tensile strength ;) ] 
    }

    return $password;       // Returns the generated Pass
}

Let's Say we need 10 Digit Pass

echo generatePassword(10);  

Example Output(s) :

,IZCQ_IV\7

@wlqsfhT(d

1!8+1\4@uD

Another option (if you need/want to ping instead of send an HTTP request) is the Ping class for PHP. I wrote it for just this purpose, and it lets you use one of three supported methods to ping a server (some servers/environments only support one of the three methods).

Example usage:

require_once('Ping/Ping.php');
$host = 'www.example.com';
$ping = new Ping($host);
$latency = $ping->ping();
if ($latency) {
  print 'Latency is ' . $latency . ' ms';
}
else {
  print 'Host could not be reached.';
}

The simplest and safest way to split a string using new lines, regardless of format (CRLF, LFCR or LF), is to remove all carriage return characters and then split on the new line characters. "text".replace(/\r/g, "").split(/\n/);

This ensures that when you have continuous new lines (i.e. \r\n\r\n, \n\r\n\r, or \n\n) the result will always be the same.

In your case the code would look like:

(function ($) {
    $(document).ready(function () {
        $('#data').submit(function (e) {
            var ks = $('#keywords').val().replace(/\r/g, "").split(/\n/);
            e.preventDefault();
            alert(ks[0]);
            $.each(ks, function (k) {
                alert(k);
            });
        });
    });
})(jQuery);

Here are some examples that display the importance of this method:

var examples = ["Foo\r\nBar", "Foo\r\n\r\nBar", "Foo\n\r\n\rBar", "Foo\nBar\nFooBar"];_x000D_
_x000D_
examples.forEach(function(example) {_x000D_
  output(`Example "${example}":`);_x000D_
  output(`Split using "\n": "${example.split("\n")}"`);_x000D_
  output(`Split using /\r?\n/: "${example.split(/\r?\n/)}"`);_x000D_
  output(`Split using /\r\n|\n|\r/: "${example.split(/\r\n|\n|\r/)}"`);_x000D_
  output(`Current method: ${example.replace(/\r/g, "").split("\n")}`);_x000D_
  output("________");_x000D_
});_x000D_
_x000D_
function output(txt) {_x000D_
  console.log(txt.replace(/\n/g, "\\n").replace(/\r/g, "\\r"));_x000D_
}

You need to cast the array - the returned array is actually of the requested type, i.e. myEnum[] if you ask for typeof(myEnum):

myEnum[] values = (myEnum[]) Enum.GetValues(typeof(myEnum));

Then values[0] etc

The path-matching strategy, one of 'prefix' or 'full'. Default is 'prefix'.

By default, the router checks URL elements from the left to see if the URL matches a given path, and stops when there is a match. For example, '/team/11/user' matches 'team/:id'.

The path-match strategy 'full' matches against the entire URL. It is important to do this when redirecting empty-path routes. Otherwise, because an empty path is a prefix of any URL, the router would apply the redirect even when navigating to the redirect destination, creating an endless loop.

Source : https://angular.io/api/router/Route#properties

I know this is an old post, with a lot of changes since 2017, but I have found that I can close my current tab/window with:

onClick="javascript:window.close('','_parent','');", now in 2019.  

Use Finder-->go to folder and enter given basepath to reach application folders

NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *basePath = ([paths count] > 0) ? [paths objectAtIndex:0] : nil;

NSLog(@"%@",basePath);

You can simply use this code,

TelephonyManager tm = (TelephonyManager)this.getSystemService(Context.TELEPHONY_SERVICE);
String countryCodeValue = tm.getNetworkCountryIso();

This will return 'US' if your current connected network is in the United States. This works without a SIM card even.

This is quicker than iterating through the array manually:

static bool isStringInArray(string[] strArray, string key)
    {

        if (strArray.Contains(key))
            return true;
        return false;
    }

public static update(values: Object, options: Object): Promise>

check documentation once http://docs.sequelizejs.com/class/lib/model.js~Model.html#static-method-update

  Project.update(
    // Set Attribute values 
    { title:'a very different title now' },
  // Where clause / criteria 
     { _id : 1 }     
  ).then(function(result) { 

 //it returns an array as [affectedCount, affectedRows]

  })

I have tried above with above code but not working ,Here is solution to set current date selected in asp.net calendar control

dtpStartDate.SelectedDate = Convert.ToDateTime(DateTime.Now.Date);
dtpStartDate.VisibleDate = Convert.ToDateTime(DateTime.Now.ToString());

You want to count the number of itemids in your array. Simply use:

int counter=list.size();

Less code increases efficiency. Do not re-invent the wheel...

I just stumbled onto this issue accessing some Python libraries: Microsoft Visual C++ 14.0 is required. Get it with "Microsoft Visual C++ Build Tools". The latest link to that is actually here: https://visualstudio.microsoft.com/downloads/#build-tools-for-visual-studio-2019

When you begin the installer, it will have several "options" enabled which will balloon the install size to 5gb. If you have Windows 10, you'll need to leave selected the "Windows 10 SDK" option as mentioned here.

I hope it helps save others time!

Adding a solution for people with multiple Java versions installed

We have a large codebase, most of which is in Java. The majority of what I work on is written in either Java 1.7 or 1.8. Since JAVA_HOME is static, I created aliases in my .bashrc for running Maven with different values:

alias mvn5="JAVA_HOME=/usr/local/java5 && mvn"
alias mvn6="JAVA_HOME=/usr/local/java6 && mvn"
alias mvn7="JAVA_HOME=/usr/local/java7 && mvn"
alias mvn8="JAVA_HOME=/usr/local/java8 && mvn"

This lets me run Maven from the command line on my development machine regardless of the JDK version used on the project.

Edit: A better solution is presented by the answer from Ondrej, which obviates remembering aliases.

If your UML modeling tool has support for specifying an Enumeration, you should use that. It will likely be easier to do and it will give your model stronger semantics. Visually the result will be very similar to a Class with an <<enumeration>> Stereotype, but in the UML metamodel, an Enumeration is actually a separate (meta)type.

+---------------------+
|   <<enumeration>>   |
|    DayOfTheWeek     |
|_____________________|
| Sunday              |
| Monday              |
| Tuesday             |
| ...                 |
+---------------------+

Once it is defined, you can use it as the type of an Attribute just like you would a Datatype or the name one of your own Classes.

+---------------------+
|        Event        |
|_____________________|
| day : DayOfTheWeek  |
| ...                 |
+---------------------+

If you're using ArgoEclipse or ArgoUML, there's a pulldown menu on the toolbar which selects among Datatype, Enumeration, Signal, etc that will allow you to create your own Enumerations. The compartment that normally contains Attributes can then be populated with EnumerationLiterals for the values of your enumeration.

Here's a picture of a slightly different example in ArgoUML:

On Windows, the default location is: C:\ProgramData\Docker\containers\<container-id>-json.log.

For me the problem was that I was setting REQUESTS_CA_BUNDLE in my .bash_profile

/Users/westonagreene/.bash_profile:
...
export REQUESTS_CA_BUNDLE=/usr/local/etc/openssl/cert.pem
...

Once I set REQUESTS_CA_BUNDLE to blank (i.e. removed from .bash_profile), requests worked again.

export REQUESTS_CA_BUNDLE=""

The problem only exhibited when executing python requests via a CLI (Command Line Interface). If I ran requests.get(URL, CERT) it resolved just fine.

Mac OS Catalina (10.15.6). Pyenv of 3.6.11. Error message I was getting: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1056)

My answer elsewhere: https://stackoverflow.com/a/64151964/4420657

git reset and git clean can be overkill in some situations (and be a huge waste of time).

If you simply have a message like "The following untracked files would be overwritten..." and you want the remote/origin/upstream to overwrite those conflicting untracked files, then git checkout -f <branch> is the best option.

If you're like me, your other option was to clean and perform a --hard reset then recompile your project.

The str.split() method without an argument splits on whitespace:

>>> "many   fancy word \nhello    \thi".split()
['many', 'fancy', 'word', 'hello', 'hi']

put .gitignore in your main catalog

git status (you will see which files you can commit)
git add -A
git commit -m "message"
git push

Add a span with the style="float: right" element inside the h1 element. So you can add a "goto top of the page" link, with a unicode arrow link button.

<h1 id="myAnchor">Headline Text
<span style="float: right"><a href="#top" aria-hidden="true">?</a></span>
</h1>

Install PIL(Python Image Library) :

then:

from PIL import Image
myImage = Image.open("your_image_here");
myImage.show();

subprocess.call

Automatically waits , you can also use:

p1.wait()

Don't forget that all your old console utilities work just fine in PowerShell:

PS> hostname
KEITH1

1. Make the database connection and retrieve the query result.
2. Traverse through the result and display the query results.

The example code below demonstrates this in detail.

<%@page import="java.sql.*, java.io.*,listresult"%> //import the required library

<%

String label = request.getParameter("label"); // retrieving a variable from a previous page

Connection dbc = null; //Make connection to the database
Class.forName("com.mysql.jdbc.Driver");
dbc = DriverManager.getConnection("jdbc:mysql://localhost:3306/works", "root", "root");
if (dbc != null) 
{
    System.out.println("Connection successful");
}

ResultSet rs = listresult.dbresult.func(dbc, label); //This function is in the end. The function is defined in another package- listresult

%>

<form name="demo form" method="post">

    <table>
        <tr>
            <td>
                Label Name:
            </td>

            <td>
                <input type="text" name="label" value="<%=rs.getString("labelname")%>">
            </td>

            <td>
                <select name="label">
                <option value="">SELECT</option>

                <% while (rs.next()) {%>

                    <option value="<%=rs.getString("lname")%>"><%=rs.getString("lname")%>
                    </option>

                <%}%>
                </select>
            </td>
        </tr>
    </table>

</form>

//The function:

public static ResultSet func(Connection dbc, String x)
{
    ResultSet rs = null;
    String sql;
    PreparedStatement pst;
    try
    {
        sql = "select lname from demo where label like '" + x + "'";
        pst = dbc.prepareStatement(sql);
        rs = pst.executeQuery();
    } 
    catch (Exception e) 
    {
        e.printStackTrace();
        String sqlMessage = e.getMessage();
    }
    return rs;
}

I have tried to make this example as detailed as possible. Do ask if you have any queries.

Not only can you add raw strings to matplotlib but you can also specify the font in matplotlibrc or locally with:

from matplotlib import rc

rc('font', **{'family':'serif','serif':['Palatino']})
rc('text', usetex=True)

This would change your serif latex font. You can also specify the sans-serif Helvetica like so

rc('font',**{'family':'sans-serif','sans-serif':['Helvetica']})

Other options are cursive and monospace with their respective font names. Your label would then be

fig.gca().set_xlabel(r'wavelength $5000 \AA$')

If the font doesn't supply an Angstrom symbol you can try using \mathring{A}

Normally when you try to select a node using xpath your xpath-engine will return null or equivalent if the node doesn't exists.

xpath: "/Consumers/Consumer/DataSources/Credit/CreditReport/AttachedXml"

If your using xsl check out this question for an answer:

xpath find if node exists

Check this:

<select class="form-control" id="department" name="department" type="text">
    <option value="medical-furniture" @if($list->department == "medical-furniture") selected @endif>Medical furniture</option>
    <option value="medical-table" @if($list->department == "medical-table") selected @endif>Medical table</option>
    <option value="service" @if($list->department == "service") selected @endif>Service</option>
</select>

Not an OP direct response, but I thought I would jimmy in here responding to the the OP's ERROR messsage, which may point you in another direction entirely!

All these answers are referring to an overall ORDER BY once the record set has been retrieved and you sort the lot.

What if you want to ORDER BY each portion of the UNION independantly, and still have them "joined" in the same SELECT?

SELECT pass1.* FROM 
 (SELECT TOP 1000 tblA.ID, tblA.CustomerName 
  FROM TABLE_A AS tblA ORDER BY 2) AS pass1
UNION ALL 
SELECT pass2.* FROM 
  (SELECT TOP 1000 tblB.ID, tblB.CustomerName 
   FROM TABLE_B AS tblB ORDER BY 2) AS pass2

Note the TOP 1000 is an arbitary number. Use a big enough number to capture all of the data you require.

I'm pretty sure that the join doesn't even do what you want. If there are 100 records in table a with a null qid and 100 records in table b with a null qid, then the join as written should make a cross join and give 10,000 results for those records. If you look at the following code and run the examples, I think that the last one is probably more the result set you intended:

create table #test1 (id int identity, qid int)
create table #test2 (id int identity, qid int)

Insert #test1 (qid)
select null
union all
select null
union all
select 1
union all
select 2
union all
select null

Insert #test2 (qid)
select null
union all
select null
union all
select 1
union all
select 3
union all
select null


select * from #test2 t2
join #test1 t1 on t2.qid = t1.qid

select * from #test2 t2
join #test1 t1 on isnull(t2.qid, 0) = isnull(t1.qid, 0)


select * from #test2 t2
join #test1 t1 on 
 t1.qid = t2.qid OR ( t1.qid IS NULL AND t2.qid IS NULL )


select t2.id, t2.qid, t1.id, t1.qid from #test2 t2
join #test1 t1 on t2.qid = t1.qid
union all
select null, null,id, qid from #test1 where qid is null
union all
select id, qid, null, null from #test2  where qid is null

public static void main(String[] args) {
    int hex = 0x123456;
    int r = (hex & 0xFF0000) >> 16;
    int g = (hex & 0xFF00) >> 8;
    int b = (hex & 0xFF);
}

Jimmy's answer correctly represents the continuous JavaScript integer spectrum as -9007199254740992 to 9007199254740992 inclusive (sorry 9007199254740993, you might think you are 9007199254740993, but you are wrong! Demonstration below or in jsfiddle).

console.log(9007199254740993);

However, there is no answer that finds/proves this programatically (other than the one CoolAJ86 alluded to in his answer that would finish in 28.56 years ;), so here's a slightly more efficient way to do that (to be precise, it's more efficient by about 28.559999999968312 years :), along with a test fiddle:

/**_x000D_
 * Checks if adding/subtracting one to/from a number yields the correct result._x000D_
 *_x000D_
 * @param number The number to test_x000D_
 * @return true if you can add/subtract 1, false otherwise._x000D_
 */_x000D_
var canAddSubtractOneFromNumber = function(number) {_x000D_
    var numMinusOne = number - 1;_x000D_
    var numPlusOne = number + 1;_x000D_
    _x000D_
    return ((number - numMinusOne) === 1) && ((number - numPlusOne) === -1);_x000D_
}_x000D_
_x000D_
//Find the highest number_x000D_
var highestNumber = 3; //Start with an integer 1 or higher_x000D_
_x000D_
//Get a number higher than the valid integer range_x000D_
while (canAddSubtractOneFromNumber(highestNumber)) {_x000D_
    highestNumber *= 2;_x000D_
}_x000D_
_x000D_
//Find the lowest number you can't add/subtract 1 from_x000D_
var numToSubtract = highestNumber / 4;_x000D_
while (numToSubtract >= 1) {_x000D_
    while (!canAddSubtractOneFromNumber(highestNumber - numToSubtract)) {_x000D_
        highestNumber = highestNumber - numToSubtract;_x000D_
    }_x000D_
    _x000D_
    numToSubtract /= 2;_x000D_
}        _x000D_
_x000D_
//And there was much rejoicing.  Yay.    _x000D_
console.log('HighestNumber = ' + highestNumber);

Hoping to provide a more nuanced answer than any of the ones here, especially as some things have changed since this was originally asked ~4 years ago, and because many of the top-voted answers claiming that you have to set this up as two separate applications are not accurate.

You have two primary architecture options:

1. A completely decoupled client/server approach using something like create-react-app and Django REST Framework
2. A hybrid architecture where you set up a React build pipeline (likely using webpack) and then include the compiled files as static files in your Django templates.

These might look something like this:

Option 1 (Client/Server Architecture):

Option 2 (Hybrid Architecture):

The decision between these two will depend on your / your team's experience, as well as the complexity of your UI. The first option is good if you have a lot of JS experience, want to keep your front-end / back-end developers separate, or want to write your entire application as a React single-page-app. The second option is generally better if you are more familiar with Django and want to move quickly while also using React for some parts of your app. I find it's a particularly good fit for full-stack solo-developers.

There is a lot more information in the series "Modern JavaScript for Django Developers", including choosing your architecture, integrating your JS build into a Django project and building a single-page React app.

Full disclosure, I'm the author of that series.

You can also use npm for this by adding an entry to the scripts element of your package.json file. E.g.

"launch-ios": "react-native run-ios --simulator \"iPad Air 2\""

Then to use this: npm run launch-ios

View mView;
mView.getContext();

I am not sure why people make it complicated:

import sys 
print("%s/%s" %(sys._getframe().f_code.co_filename, sys._getframe().f_code.co_name))

Case 1 should have worked. I don't see anything wrong. There may be some other problems. I would suggest a clean build.

git grep

Here is the syntax using git grep combining multiple patterns using Boolean expressions:

git grep -e pattern1 --and -e pattern2 --and -e pattern3

^{The above command will print lines matching all the patterns at once.}

If the files aren't under version control, add --no-index param.

Search files in the current directory that is not managed by Git.

Check man git-grep for help.

See also:

• How to use grep to match string1 AND string2?
• Check if all of multiple strings or regexes exist in a file.
• How to run grep with multiple AND patterns?
• For multiple patterns stored in the file, see: Match all patterns from file at once.

Sure. You can add a border to any layout you want. Basically, you need to create a custom drawable and add it as a background to your layout. example:

Create a file called customborder.xml in your drawable folder:

<?xml version="1.0" encoding="UTF-8"?>
 <shape xmlns:android="http://schemas.android.com/apk/res/android" android:shape="rectangle">
   <corners android:radius="20dp"/> 
   <padding android:left="10dp" android:right="10dp" android:top="10dp" android:bottom="10dp"/>
   <stroke android:width="1dp" android:color="#CCCCCC"/>
 </shape>

Now apply it as a background to your smaller layout:

<LinearLayout android:orientation="vertical"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent"
    android:background="@drawable/customborder">

That should do the trick.

Also see:

• http://tekeye.biz/2012/add-a-border-to-an-android-layout
• How to add border around linear layout except at the bottom?

Try: Controls("Check Box 1") = True

In mdcharm it is like this:

* [Descripción](#descripcion)
* [Funcionamiento](#funcionamiento)
* [Instalación](#instalacion)
* [Configuración](#configuracion)

### Descripción {#descripcion}
### Funcionamiento {#funcionamiento}
### Instalación {#instalacion}
### Configuración {#configuracion}

You can use a copy constructor that immediately invokes the instance constructor, or if your instance constructor does more than assignments have the copy constructor assign the incoming values to the instance.

class Person
{
    // Copy constructor 
    public Person(Person previousPerson)
    {
        Name = previousPerson.Name;
        Age = previousPerson.Age;
    }

    // Copy constructor calls the instance constructor.
    public Person(Person previousPerson)
        : this(previousPerson.Name, previousPerson.Age)
    {
    }

    // Instance constructor.
    public Person(string name, int age)
    {
        Name = name;
        Age = age;
    }

    public int Age { get; set; }

    public string Name { get; set; }
}

Referenced the Microsoft C# Documentation under Constructor for this example having had this issue in the past.

This is a good reference, it helped me switch my http requests to httpClient.

It compares the two in terms of differences and gives code examples.

This is just a few differences I dealt with while changing services to httpclient in my project (borrowing from the article I mentioned) :

Importing

import {HttpModule} from '@angular/http';
import {HttpClientModule} from '@angular/common/http';

Requesting and parsing response:

@angular/http

 this.http.get(url)
      // Extract the data in HTTP Response (parsing)
      .map((response: Response) => response.json() as GithubUser)
      .subscribe((data: GithubUser) => {
        // Display the result
        console.log('TJ user data', data);
      });

@angular/common/http

 this.http.get(url)
      .subscribe((data: GithubUser) => {
        // Data extraction from the HTTP response is already done
        // Display the result
        console.log('TJ user data', data);
      });

Note: You no longer have to extract the returned data explicitly; by default, if the data you get back is type of JSON, then you don't have to do anything extra.

But, if you need to parse any other type of response like text or blob, then make sure you add the responseType in the request. Like so:

Making the GET HTTP request with responseType option:

 this.http.get(url, {responseType: 'blob'})
      .subscribe((data) => {
        // Data extraction from the HTTP response is already done
        // Display the result
        console.log('TJ user data', data);
      });

Adding Interceptor

I also used interceptors for adding the token for my authorization to every request, reference.

like so:

@Injectable()
export class MyFirstInterceptor implements HttpInterceptor {

    constructor(private currentUserService: CurrentUserService) { }

    intercept(req: HttpRequest<any>, next: HttpHandler): Observable<HttpEvent<any>> {

        // get the token from a service
        const token: string = this.currentUserService.token;

        // add it if we have one
        if (token) {
            req = req.clone({ headers: req.headers.set('Authorization', 'Bearer ' + token) });
        }

        // if this is a login-request the header is 
        // already set to x/www/formurl/encoded. 
        // so if we already have a content-type, do not 
        // set it, but if we don't have one, set it to 
        // default --> json
        if (!req.headers.has('Content-Type')) {
            req = req.clone({ headers: req.headers.set('Content-Type', 'application/json') });
        }

        // setting the accept header
        req = req.clone({ headers: req.headers.set('Accept', 'application/json') });
        return next.handle(req);
    }
}

Its a pretty nice upgrade!

table {
    border-collapse: collapse;
}

this issue comes up with 2 reasons

1) the android SDK has not been install 2) the build toold version corresponsind to the android SDK is not installed

to start open terminal and type android and install API 26(updated one) and build tools version 26.0.1 or 26.0.2 then try to run using command ionic cordova build android

This piece of code from Microsoft explains everything:

// Find difference between Date.Now and Date.UtcNow
  date1 = DateTime.Now;
  date2 = DateTime.UtcNow;
  difference = date1 - date2;
  Console.WriteLine("{0} - {1} = {2}", date1, date2, difference);

  // Find difference between Now and UtcNow using DateTimeOffset
  dateOffset1 = DateTimeOffset.Now;
  dateOffset2 = DateTimeOffset.UtcNow;
  difference = dateOffset1 - dateOffset2;
  Console.WriteLine("{0} - {1} = {2}", 
                    dateOffset1, dateOffset2, difference);
  // If run in the Pacific Standard time zone on 4/2/2007, the example
  // displays the following output to the console:
  //    4/2/2007 7:23:57 PM - 4/3/2007 2:23:57 AM = -07:00:00
  //    4/2/2007 7:23:57 PM -07:00 - 4/3/2007 2:23:57 AM +00:00 = 00:00:00

try jquery,

  <div>
        <a href="#" class="majorpoints" onclick="majorpointsexpand(" + $('.majorpointslegend').html() + ")"/>
        <legend class="majorpointslegend">Expand</legend>
        <div id="data" style="display:none" >
            <ul>
                <li></li>
                <li></li>
            </ul>
        </div>
    </div>


function majorpointsexpand(expand)
    {
        if (expand == "Expand")
            {
                $('#data').css("display","inherit");
                $(".majorpointslegend").html("Collapse");
            }
        else
            {
                $('#data').css("display","none");
                $(".majorpointslegend").html("Expand");
            }
    }

You can choose any extension in the world if you setup Apache correctly. You could use .html to do PHP if you set up in your Apache config.

In conclusion, extension has nothing to do with the app or website itself. You can use the one you want, but normaly, use .php (to not reinvent the wheel)

But in 2019, you should use routing and forgot about extension at the end.

I recommend you using Laravel.

In answer to @KingCrunch: True, Apache not use it by default but you can easily use it if you change config. But this it not recommended since everybody know that it not really an option.

I already saw .html files that executed PHP using the html extension.

• Case classes can be pattern matched
• Case classes automatically define hashcode and equals
• Case classes automatically define getter methods for the constructor arguments.

(You already mentioned all but the last one).

Those are the only differences to regular classes.

To send to both remote with one command, you can create a alias for it:

git config alias.pushall '!git push origin devel && git push github devel'

With this, when you use the command git pushall, it will update both repositories.

You can easily validate an XML file or tree against an XML Schema (XSD) with the xmlschema Python package. It's pure Python, available on PyPi and doesn't have many dependencies.

Example - validate a file:

import xmlschema
xmlschema.validate('doc.xml', 'some.xsd')

The method raises an exception if the file doesn't validate against the XSD. That exception then contains some violation details.

If you want to validate many files you only have to load the XSD once:

xsd = xmlschema.XMLSchema('some.xsd')
for filename in filenames:
    xsd.validate(filename)

If you don't need the exception you can validate like this:

if xsd.is_valid('doc.xml'):
    print('do something useful')

Alternatively, xmlschema directly works on file objects and in memory XML trees (either created with xml.etree.ElementTree or lxml). Example:

import xml.etree.ElementTree as ET
t = ET.parse('doc.xml')
result = xsd.is_valid(t)
print('Document is valid? {}'.format(result))

You can also fetch data with hooks in your function components

full example with api call: https://codesandbox.io/s/jvvkoo8pq3

second example: https://jsfiddle.net/bradcypert/jhrt40yv/6/

const Repos = ({user}) => {
  const [repos, setRepos] = React.useState([]);

  React.useEffect(() => {
    const fetchData = async () => {
        const response = await axios.get(`https://api.github.com/users/${user}/repos`);
        setRepos(response.data);
    }

    fetchData();
  }, []);

  return (
  <div>
    {repos.map(repo =>
      <div key={repo.id}>{repo.name}</div>
    )}
  </div>
  );
}

ReactDOM.render(<Repos user="bradcypert" />, document.querySelector("#app"))

JSON in any HTML tag except <script> tag would be a mere text. Thus it's like you add a story to your HTML page.

However, about formatting, that's another matter. I guess you should change the title of your question.

Take a look at this question. Also see this page.

var target = ["apple","banana","orange"];
var checkArray = ["apple","banana","pineapple"];

var containsOneCommonItem = target.some(x => checkArray.some(y => y === x));`

["apple","grape"] //returns true;

["apple","banana","pineapple"] //returns true;

["grape", "pineapple"] //returns false;

My problem was our own collection class, which was flagged with [DataContract]. From my point of view, this was a clean approach and it worked fine with XmlSerializer but for the WCF endpoint it was breaking and we had to remove it. XmlSerializer still works without.

Not working

[DataContract]
public class AttributeCollection : List<KeyValuePairSerializable<string, string>>

Working

public class AttributeCollection : List<KeyValuePairSerializable<string, string>>

When app is release some time that case https://developers.facebook.com/apps/{$appid}/alerts/ "Your app has been placed into development mode due to an invalid Privacy Policy." can change you app from release mode to development mode so check the Privacy Policy

I had a similar problem this morning (trying to build for Android using Unity3D). I ended up uninstalling JDK9 and installing Java SE Development Kit 8u144. Hope this helps.

1. brew cask uninstall java # uninstall java9
2. brew tap homebrew/cask-versions
3. brew cask install java8 # install java8
4. touch ~/.android/repositories.cfg # without this file, error will occur on next step
5. brew cask install android-sdk

ng g c COMPONENTNAME should work, if your are getting module not found exception then try these things-

1. Check your project directory.
2. If you are using visual studio code then reload it or reopen your project in it.

You can!!! In short use this as the connection string:

ldap://<host>:3268/DC=<my>,DC=<domain>?cn

together with your search filter, e.g.

(&(sAMAccountName={0})(&((objectCategory=person)(objectclass=user)(mail=*)(!(userAccountControl:1.2.840.113556.1.4.803:=2))(memberOf:1.2.840.113556.1.4.1941:=CN=<some-special-nested-group>,OU=<ou3>,OU=<ou2>,OU=<ou1>,DC=<dc3>,DC=<dc2>,DC=<dc1>))))

That will search in the so called Global Catalog, that had been available out-of-the-box in our environment.

Instead of the known/common other versions (or combinations thereof) that did NOT work in our environment with multiple OUs:

ldap://<host>/DC=<my>,DC=<domain>
ldap://<host>:389/DC=<my>,DC=<domain>  (standard port)
ldap://<host>/OU=<someOU>,DC=<my>,DC=<domain>
ldap://<host>/CN=<someCN>,DC=<my>,DC=<domain>
ldap://<host>/(|(OU=<someOU1>)(OU=<someOU2>)),DC=<my>,DC=<domain> (search filters here shouldn't work at all by definition)

(I am a developer, not an AD/LDAP guru:) Damn I had been searching for this solution everywhere for almost 2 days and almost gave up, getting used to the thought I might have to implement this obviously very common scenario by hand (with Jasperserver/Spring security(/Tomcat)). (So this shall be a reminder if somebody else or me should have this problem again in the future :O) )

Here some other related threads I found during my research that had been mostly of little help:

• the solution hidden in a comment of LarreDo from 2006
• some Microsoft answered question of best practices how to design your organization in the directory, stating using multiple top-level OUs in bigger companies is not unusual or even suitable
• Tim Wong (2011) added that this may be a problem of unresolvable DNS names in the ForestDNSZones (part of the AD top-level domain used)
• example code for implementing it by hand when using Spring security (e.g. also used in Jasper)
• John Morrissey (2012) suggested it could be related to some security settings and it may work if you use TLS (I guess if the LDAP server wants to restrict such global searches for non-secure connections - which would not seem a good (its kind of half-baked) security approach to me)
• awatkins (2012) used some hacking approach in some mod_ldap.c code (of whatever software)

And here I will provide our anonymized Tomcat LDAP config in case it may be helpful (/var/lib/tomcat7/webapps/jasperserver/WEB-INF/applicationContext-externalAUTH-LDAP.xml):

<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.1.xsd">

<!-- ############ LDAP authentication ############ - Sample configuration 
    of external authentication via an external LDAP server. -->


<bean id="proxyAuthenticationProcessingFilter"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.BaseAuthenticationProcessingFilter">
    <property name="authenticationManager">
        <ref local="ldapAuthenticationManager" />
    </property>
    <property name="externalDataSynchronizer">
        <ref local="externalDataSynchronizer" />
    </property>

    <property name="sessionRegistry">
        <ref bean="sessionRegistry" />
    </property>

    <property name="internalAuthenticationFailureUrl" value="/login.html?error=1" />
    <property name="defaultTargetUrl" value="/loginsuccess.html" />
    <property name="invalidateSessionOnSuccessfulAuthentication"
        value="true" />
    <property name="migrateInvalidatedSessionAttributes" value="true" />
</bean>

<bean id="proxyAuthenticationSoapProcessingFilter"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.DefaultAuthenticationSoapProcessingFilter">
    <property name="authenticationManager" ref="ldapAuthenticationManager" />
    <property name="externalDataSynchronizer" ref="externalDataSynchronizer" />

    <property name="invalidateSessionOnSuccessfulAuthentication"
        value="true" />
    <property name="migrateInvalidatedSessionAttributes" value="true" />
    <property name="filterProcessesUrl" value="/services" />
</bean>

<bean id="proxyRequestParameterAuthenticationFilter"
    class="com.jaspersoft.jasperserver.war.util.ExternalRequestParameterAuthenticationFilter">
    <property name="authenticationManager">
        <ref local="ldapAuthenticationManager" />
    </property>
    <property name="externalDataSynchronizer" ref="externalDataSynchronizer" />

    <property name="authenticationFailureUrl">
        <value>/login.html?error=1</value>
    </property>
    <property name="excludeUrls">
        <list>
            <value>/j_spring_switch_user</value>
        </list>
    </property>
</bean>

<bean id="proxyBasicProcessingFilter"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.ExternalAuthBasicProcessingFilter">
    <property name="authenticationManager" ref="ldapAuthenticationManager" />
    <property name="externalDataSynchronizer" ref="externalDataSynchronizer" />

    <property name="authenticationEntryPoint">
        <ref local="basicProcessingFilterEntryPoint" />
    </property>
</bean>

<bean id="proxyAuthenticationRestProcessingFilter"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.DefaultAuthenticationRestProcessingFilter">
    <property name="authenticationManager">
        <ref local="ldapAuthenticationManager" />
    </property>
    <property name="externalDataSynchronizer">
        <ref local="externalDataSynchronizer" />
    </property>

    <property name="filterProcessesUrl" value="/rest/login" />
    <property name="invalidateSessionOnSuccessfulAuthentication"
        value="true" />
    <property name="migrateInvalidatedSessionAttributes" value="true" />
</bean>



<bean id="ldapAuthenticationManager" class="org.springframework.security.providers.ProviderManager">
    <property name="providers">
        <list>
            <ref local="ldapAuthenticationProvider" />
            <ref bean="${bean.daoAuthenticationProvider}" />
            <!--anonymousAuthenticationProvider only needed if filterInvocationInterceptor.alwaysReauthenticate 
                is set to true <ref bean="anonymousAuthenticationProvider"/> -->
        </list>
    </property>
</bean>

<bean id="ldapAuthenticationProvider"
    class="org.springframework.security.providers.ldap.LdapAuthenticationProvider">
    <constructor-arg>
        <bean
            class="org.springframework.security.providers.ldap.authenticator.BindAuthenticator">
            <constructor-arg>
                <ref local="ldapContextSource" />
            </constructor-arg>
            <property name="userSearch" ref="userSearch" />
        </bean>
    </constructor-arg>
    <constructor-arg>
        <bean
            class="org.springframework.security.ldap.populator.DefaultLdapAuthoritiesPopulator">
            <constructor-arg index="0">
                <ref local="ldapContextSource" />
            </constructor-arg>
            <constructor-arg index="1">
                <value></value>
            </constructor-arg>

            <property name="groupRoleAttribute" value="cn" />
            <property name="convertToUpperCase" value="true" />
            <property name="rolePrefix" value="ROLE_" />
            <property name="groupSearchFilter"
                value="(&amp;(member={0})(&amp;(objectCategory=Group)(objectclass=group)(cn=my-nested-group-name)))" />
            <property name="searchSubtree" value="true" />
            <!-- Can setup additional external default roles here <property name="defaultRole" 
                value="LDAP"/> -->
        </bean>
    </constructor-arg>
</bean>

<bean id="userSearch"
    class="org.springframework.security.ldap.search.FilterBasedLdapUserSearch">
    <constructor-arg index="0">
        <value></value>
    </constructor-arg>
    <constructor-arg index="1">
        <value>(&amp;(sAMAccountName={0})(&amp;((objectCategory=person)(objectclass=user)(mail=*)(!(userAccountControl:1.2.840.113556.1.4.803:=2))(memberOf:1.2.840.113556.1.4.1941:=CN=my-nested-group-name,OU=ou3,OU=ou2,OU=ou1,DC=dc3,DC=dc2,DC=dc1))))
        </value>
    </constructor-arg>
    <constructor-arg index="2">
        <ref local="ldapContextSource" />
    </constructor-arg>
    <property name="searchSubtree">
        <value>true</value>
    </property>
</bean>

<bean id="ldapContextSource"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.ldap.JSLdapContextSource">
    <constructor-arg value="ldap://myhost:3268/DC=dc3,DC=dc2,DC=dc1?cn" />
    <!-- manager user name and password (may not be needed) -->
    <property name="userDn" value="CN=someuser,OU=ou4,OU=1,DC=dc3,DC=dc2,DC=dc1" />
    <property name="password" value="somepass" />
    <!--End Changes -->
</bean>
<!-- ############ LDAP authentication ############ -->

<!-- ############ JRS Synchronizer ############ -->
<bean id="externalDataSynchronizer"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.ExternalDataSynchronizerImpl">
    <property name="externalUserProcessors">
        <list>
            <ref local="externalUserSetupProcessor" />
            <!-- Example processor for creating user folder -->
            <!--<ref local="externalUserFolderProcessor"/> -->
        </list>
    </property>
</bean>

<bean id="abstractExternalProcessor"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.processors.AbstractExternalUserProcessor"
    abstract="true">
    <property name="repositoryService" ref="${bean.repositoryService}" />
    <property name="userAuthorityService" ref="${bean.userAuthorityService}" />
    <property name="tenantService" ref="${bean.tenantService}" />
    <property name="profileAttributeService" ref="profileAttributeService" />
    <property name="objectPermissionService" ref="objectPermissionService" />
</bean>

<bean id="externalUserSetupProcessor"
    class="com.jaspersoft.jasperserver.api.security.externalAuth.processors.ExternalUserSetupProcessor"
    parent="abstractExternalProcessor">
    <property name="userAuthorityService">
        <ref bean="${bean.internalUserAuthorityService}" />
    </property>
    <property name="defaultInternalRoles">
        <list>
            <value>ROLE_USER</value>
        </list>
    </property>

    <property name="organizationRoleMap">
        <map>
            <!-- Example of mapping customer roles to JRS roles -->
            <entry>
                <key>
                    <value>ROLE_MY-NESTED-GROUP-NAME</value>
                </key>
                <!-- JRS role that the <key> external role is mapped to -->
                <value>ROLE_USER</value>
            </entry>
        </map>
    </property>
</bean>

<!--bean id="externalUserFolderProcessor" class="com.jaspersoft.jasperserver.api.security.externalAuth.processors.ExternalUserFolderProcessor" 
    parent="abstractExternalProcessor"> <property name="repositoryService" ref="${bean.unsecureRepositoryService}"/> 
    </bean -->

<!-- ############ JRS Synchronizer ############ -->

From the first answer,

"Using Mongoose, a user can define the schema for the documents in a particular collection. It provides a lot of convenience in the creation and management of data in MongoDB."

You can now also define schema with mongoDB native driver using

##For new collection

`db.createCollection("recipes",
    validator: { $jsonSchema: {
         <<Validation Rules>>
        }
    }
)`

##For existing collection

`db.runCommand( {
        collMod: "recipes",
        validator: { $jsonSchema: {
             <<Validation Rules>>
            }
        }
    } )`
    

##full example

`db.createCollection("recipes", {
  validator: {
    $jsonSchema: {
      bsonType: "object",
      required: ["name", "servings", "ingredients"],
      additionalProperties: false,
      properties: {
        _id: {},
        name: {
          bsonType: "string",
          description: "'name' is required and is a string"
        },
        servings: {
          bsonType: ["int", "double"],
          minimum: 0,
          description:
            "'servings' is required and must be an integer with a minimum of zero."
        },
        cooking_method: {
          enum: [
            "broil",
            "grill",
            "roast",
            "bake",
            "saute",
            "pan-fry",
            "deep-fry",
            "poach",
            "simmer",
            "boil",
            "steam",
            "braise",
            "stew"
          ],
          description:
            "'cooking_method' is optional but, if used, must be one of the listed options."
        },
        ingredients: {
          bsonType: ["array"],
          minItems: 1,
          maxItems: 50,
          items: {
            bsonType: ["object"],
            required: ["quantity", "measure", "ingredient"],
            additionalProperties: false,
            description: "'ingredients' must contain the stated fields.",
            properties: {
              quantity: {
                bsonType: ["int", "double", "decimal"],
                description:
                  "'quantity' is required and is of double or decimal type"
              },
              measure: {
                enum: ["tsp", "Tbsp", "cup", "ounce", "pound", "each"],
                description:
                  "'measure' is required and can only be one of the given enum values"
              },
              ingredient: {
                bsonType: "string",
                description: "'ingredient' is required and is a string"
              },
              format: {
                bsonType: "string",
                description:
                  "'format' is an optional field of type string, e.g. chopped or diced"
              }
            }
          }
        }
      }
    }
  }
});`

Insert collection Example

`db.recipes.insertOne({
  name: "Chocolate Sponge Cake Filling",
  servings: 4,
  ingredients: [
    {
      quantity: 7,
      measure: "ounce",
      ingredient: "bittersweet chocolate",
      format: "chopped"
    },
    { quantity: 2, measure: "cup", ingredient: "heavy cream" }
  ]
});`

First remove old version, then run literally the following:

npm install [email protected]

and for stable or recent

npm install -g npm@latest    // For the last stable version
npm install -g npm@next      // For the most recent release

While trying to use the method with excutable configuration I noticed that it may work or may NOT work depending on where in the script is located the call:

call config.cmd

I know it doesn't make any sens, but for me it's a fact. When "call config.cmd" is located at the top of the script, it works, but if further in the script it doesn't.

By doesn't work, I mean the variable are not set un the calling script.

Very very strange !!!!

Just put a pair of double quotes around your file name like this:

this.Response.AddHeader("Content-disposition", $"attachment; filename=\"{outputFileName}\"");

Another option is to use JS:

<img src='LibraryTransparent.png' onmouseover="this.src='LibraryHoverTrans.png';" onmouseout="this.src='LibraryTransparent.png';" />

Why not simply use the submit button to run the code you want. If your function returns false, it will cancel the submission.

$("#testForm").submit(function() {
    /* Do Something */
    return false;
});

After struggling with git authentication and azure devops server and trying other answers this tip here worked for me.

Using Visual Studio? Team Explorer handles authentication with Azure Repos for you.

Once I connected to the repo using Team Explorer I could use command line to execute git commands.

You put the if at the end:

[y for y in a if y not in b]

List comprehensions are written in the same order as their nested full-specified counterparts, essentially the above statement translates to:

outputlist = []
for y in a:
    if y not in b:
        outputlist.append(y)

Your version tried to do this instead:

outputlist = []
if y not in b:
    for y in a:
        outputlist.append(y)

but a list comprehension must start with at least one outer loop.

You can also try

var arr = [].reverse.call($('li'))
arr.each(function(){ ... })

Alternative:

boolean isWhiteSpaces( String s ) {
    return s != null && s.matches("\\s+");
 }

Looking at the code below, I tried it and found: Instead of writing DBCon = DBConnection.Instance(); you should put DBConnection DBCon - new DBConnection(); (That worked for me)

and instead of MySqlComman cmd = new MySqlComman(query, DBCon.GetConnection()); you should put MySqlCommand cmd = new MySqlCommand(query, DBCon.GetConnection()); (it's missing the d)

That's exactly what cursor: pointer; is supposed to do.

If you want the cursor to remain normal, you should be using cursor: default

Try this in MVC 4.0

@Html.TextBoxFor(m => m.YourDate, "{0:dd/MM/yyyy}", new { @class = "datefield form-control", @placeholder = "Enter start date..." })

use this: String customHtml =text ;

           wb.loadDataWithBaseURL(null,customHtml,"text/html", "UTF-8", null);

From Microsoft documentation:

PAGEIOLATCH_SH

Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Shared mode. Long waits may indicate problems with the disk subsystem.

In practice, this almost always happens due to large scans over big tables. It almost never happens in queries that use indexes efficiently.

If your query is like this:

Select * from <table> where <col1> = <value> order by <PrimaryKey>

, check that you have a composite index on (col1, col_primary_key).

If you don't have one, then you'll need either a full INDEX SCAN if the PRIMARY KEY is chosen, or a SORT if an index on col1 is chosen.

Both of them are very disk I/O consuming operations on large tables.

Simple:

st =  "abcdefghij"
st = st[:-1]

There is also another way that shows how it is done with steps:

list1 = "abcdefghij"
list2 = list(list1)
print(list2)
list3 = list2[:-1]
print(list3)

This is also a way with user input:

list1 = input ("Enter :")
list2 = list(list1)
print(list2)
list3 = list2[:-1]
print(list3)

To make it take away the last word in a list:

list1 = input("Enter :")
list2 = list1.split()
print(list2)
list3 = list2[:-1]
print(list3)

I know this is going to be a late answer, however here is the most correct answer.

In MySQL database, change your timestamp default value into CURRENT_TIMESTAMP. If you have old records with the fake value, you will have to manually fix them.

I did some research on this by using different methods to assign values to a nullable int. Here is what happened when I did various things. Should clarify what's going on. Keep in mind: Nullable<something> or the shorthand something? is a struct for which the compiler seems to be doing a lot of work to let us use with null as if it were a class.
As you'll see below, SomeNullable == null and SomeNullable.HasValue will always return an expected true or false. Although not demonstrated below, SomeNullable == 3 is valid too (assuming SomeNullable is an int?).
While SomeNullable.Value gets us a runtime error if we assigned null to SomeNullable. This is in fact the only case where nullables could cause us a problem, thanks to a combination of overloaded operators, overloaded object.Equals(obj) method, and compiler optimization and monkey business.

Here is a description of some code I ran, and what output it produced in labels:

int? val = null;
lbl_Val.Text = val.ToString(); //Produced an empty string.
lbl_ValVal.Text = val.Value.ToString(); //Produced a runtime error. ("Nullable object must have a value.")
lbl_ValEqNull.Text = (val == null).ToString(); //Produced "True" (without the quotes)
lbl_ValNEqNull.Text = (val != null).ToString(); //Produced "False"
lbl_ValHasVal.Text = val.HasValue.ToString(); //Produced "False"
lbl_NValHasVal.Text = (!(val.HasValue)).ToString(); //Produced "True"
lbl_ValValEqNull.Text = (val.Value == null).ToString(); //Produced a runtime error. ("Nullable object must have a value.")
lbl_ValValNEqNull.Text = (val.Value != null).ToString(); //Produced a runtime error. ("Nullable object must have a value.")

Ok, lets try the next initialization method:

int? val = new int?();
lbl_Val.Text = val.ToString(); //Produced an empty string.
lbl_ValVal.Text = val.Value.ToString(); //Produced a runtime error. ("Nullable object must have a value.")
lbl_ValEqNull.Text = (val == null).ToString(); //Produced "True" (without the quotes)
lbl_ValNEqNull.Text = (val != null).ToString(); //Produced "False"
lbl_ValHasVal.Text = val.HasValue.ToString(); //Produced "False"
lbl_NValHasVal.Text = (!(val.HasValue)).ToString(); //Produced "True"
lbl_ValValEqNull.Text = (val.Value == null).ToString(); //Produced a runtime error. ("Nullable object must have a value.")
lbl_ValValNEqNull.Text = (val.Value != null).ToString(); //Produced a runtime error. ("Nullable object must have a value.")

All the same as before. Keep in mind that initializing with int? val = new int?(null);, with null passed to the constructor, would have produced a COMPILE time error, since the nullable object's VALUE is NOT nullable. It is only the wrapper object itself that can equal null.

Likewise, we would get a compile time error from:

int? val = new int?();
val.Value = null;

not to mention that val.Value is a read-only property anyway, meaning we can't even use something like:

val.Value = 3;

but again, polymorphous overloaded implicit conversion operators let us do:

val = 3;

No need to worry about polysomthing whatchamacallits though, so long as it works right? :)

You need to place ScrollView as the first child of Layout file and now put your linearlayout inside it. Now, android will decide on the basis of content and device size available whether to show a scrollable or not.

Make sure linearlayout has no sibling because ScrollView can not have more than one child.

Your rows object holds an Item attribute where you can find the values for each of your columns. You can not expect the columns to concatenate themselves when you do a .ToString() on the row. You should access each column from the row separately, use a for or a foreach to walk the array of columns.

Here, take a look at the class:

http://msdn.microsoft.com/en-us/library/system.data.datarow.aspx

You might try to use CSS transforms for indenting a whole tr:

tr.indent {
   -webkit-transform: translate(20px,0);
   -moz-transform: translate(20px,0);
}

I think this is a valid solution. Seems to work fine in Firefox 16, Chrome 23 and Safari 6 on my OSX.

LTRIM(RTRIM(FCT_TYP_CD)) & ') AND (' & LTRIM(RTRIM(DEP_TYP_ID)) & ')'

I think you're missing a ) on both of the trims. Some SQL versions support just TRIM which does both L and R trims...

Try this so you don't need to worry about where your logs are:

dmesg -T | egrep -i 'killed process'

-T - readable timestamps

It doesn't get easier than this. Sleep might be implemented in your FLTK or whatever, but this covers all the best ways to do standard sort of system sleeps without special event interrupts. Behold:

-- we "pcall" (try/catch) the "ex", which had better include os.sleep
-- it may be a part of the standard library in future Lua versions (past 5.2)
local ok,ex = pcall(require,"ex")
if ok then
   -- print("Ex")
   -- we need a hack now too? ex.install(), you say? okay
   pcall(ex.install)
   -- let's try something else. why not?
   if ex.sleep and not os.sleep then os.sleep = ex.sleep end
end

if not os.sleep then
   -- we make os.sleep
   -- first by trying ffi, which is part of LuaJIT, which lets us write C code
   local ok,ffi = pcall(require,"ffi")
   if ok then
      -- print("FFI")
      -- we can use FFI
      -- let's just check one more time to make sure we still don't have os.sleep
      if not os.sleep then
         -- okay, here is our custom C sleep code:
         ffi.cdef[[
            void Sleep(int ms);
            int poll(struct pollfd *fds,unsigned long nfds,int timeout);
         ]]
         if ffi.os == "Windows" then
            os.sleep = function(sec)
               ffi.C.Sleep(sec*1000)
            end
         else
            os.sleep = function(sec)
               ffi.C.poll(nil,0,sec*1000)
            end
         end
      end
   else
      -- if we can't use FFI, we try LuaSocket, which is just called "socket"
      -- I'm 99.99999999% sure of that
      local ok,socket = pcall(require,"socket")
      -- ...but I'm not 100% sure of that
      if not ok then local ok,socket = pcall(require,"luasocket") end
      -- so if we're really using socket...
      if ok then
         -- print("Socket")
         -- we might as well confirm there still is no os.sleep
         if not os.sleep then
            -- our custom socket.select to os.sleep code:
            os.sleep = function(sec)
               socket.select(nil,nil,sec)
            end
         end
      else
         -- now we're going to test "alien"
         local ok,alien = pcall(require,"alien")
         if ok then
         -- print("Alien")
         -- beam me up...
            if not os.sleep then
               -- if we still don't have os.sleep, that is
               -- now, I don't know what the hell the following code does
               if alien.platform == "windows" then
                  kernel32 = alien.load("kernel32.dll")
                  local slep = kernel32.Sleep
                  slep:types{ret="void",abi="stdcall","uint"}
                  os.sleep = function(sec)
                     slep(sec*1000)
                  end
               else
                  local pol = alien.default.poll
                  pol:types('struct', 'unsigned long', 'int')
                  os.sleep = function(sec)
                     pol(nil,0,sec*1000)
                  end
               end
            end
         elseif package.config:match("^\\") then
            -- print("busywait")
            -- if the computer is politically opposed to NIXon, we do the busywait
            -- and shake it all about
            os.sleep = function(sec)
               local timr = os.time()
               repeat until os.time() > timr + sec
            end
         else
            -- print("NIX")
            -- or we get NIXed
            os.sleep = function(sec)
               os.execute("sleep " .. sec)
            end
         end
      end
   end
end

File file = new File("E:/Responsibility.txt");  
    Scanner scanner = new Scanner(file);
    List<Integer> integers = new ArrayList<>();
    while (scanner.hasNext()) {
        if (scanner.hasNextInt()) {
            integers.add(scanner.nextInt());
        } else {
            scanner.next();
        }
    }
    System.out.println(integers);

val aList = List( 1,2,3,4,5 )

val res3 = for ( al <- aList if al > 3 ) yield al + 1
val res4 = aList.filter(_ > 3).map(_ + 1)

println( res3 )
println( res4 )

These two pieces of code are equivalent.

val res3 = for (al <- aList) yield al + 1 > 3
val res4 = aList.map( _+ 1 > 3 )

println( res3 ) 
println( res4 )

These two pieces of code are also equivalent.

Map is as flexible as yield and vice-versa.

Clean and Simple -

$selectquery="SELECT id FROM tableName ORDER BY id DESC LIMIT 1";
$result = $mysqli->query($selectquery);
$row = $result->fetch_assoc();
echo $row['id'];

This worked fine for me. I had multiple buttons which I wanted to toggle the input value text from 'Add Range' to 'Remove Range'

<input type="button" onclick="if(this.value=='Add Range') { this.value='Remove Range'; } else { this.value='Add Range'; }" />

We can use versionKey: false in Schema definition

'use strict';

const mongoose = require('mongoose');

export class Account extends mongoose.Schema {

    constructor(manager) {

        var trans = {
            tran_date: Date,
            particulars: String,
            debit: Number,
            credit: Number,
            balance: Number
        }

        super({
            account_number: Number,
            account_name: String,
            ifsc_code: String,
            password: String,
            currency: String,
            balance: Number,
            beneficiaries: Array,
            transaction: [trans]
        }, {
            versionKey: false // set to false then it wont create in mongodb
        });

        this.pre('remove', function(next) {
            manager
                .getModel(BENEFICIARY_MODEL)
                .remove({
                    _id: {
                        $in: this.beneficiaries
                    }
                })
                .exec();
            next();
        });
    }

}

I couldnt comment on @Biranchi s post since I dont have enough reputation, but it fixed the problem for me.

One thing to note! If adding changeDetection: ChangeDetectionStrategy.OnPush on the component didn't work, and its a child component (dumb component) try adding it to the parent also.

This fixed the bug, but I wonder what are the side effects of this.

The best answer is to add a Resources/.gitignore file under Resources containing:

# Ignore any file in this directory except for this file and *.foo files
*
!/.gitignore
!*.foo

If you are unwilling or unable to add that .gitignore file, there is an inelegant solution:

# Ignore any file but *.foo under Resources. Update this if we add deeper directories
Resources/*
!Resources/*/
!Resources/*.foo
Resources/*/*
!Resources/*/*/
!Resources/*/*.foo
Resources/*/*/*
!Resources/*/*/*/
!Resources/*/*/*.foo
Resources/*/*/*/*
!Resources/*/*/*/*/
!Resources/*/*/*/*.foo

You will need to edit that pattern if you add directories deeper than specified.

To remove only spaces use str.replace:

sentence = sentence.replace(' ', '')

To remove all whitespace characters (space, tab, newline, and so on) you can use split then join:

sentence = ''.join(sentence.split())

or a regular expression:

import re
pattern = re.compile(r'\s+')
sentence = re.sub(pattern, '', sentence)

If you want to only remove whitespace from the beginning and end you can use strip:

sentence = sentence.strip()

You can also use lstrip to remove whitespace only from the beginning of the string, and rstrip to remove whitespace from the end of the string.

Here's a dead simple usage of multiprocessing.Queue and multiprocessing.Process that allows callers to send an "event" plus arguments to a separate process that dispatches the event to a "do_" method on the process. (Python 3.4+)

import multiprocessing as mp
import collections

Msg = collections.namedtuple('Msg', ['event', 'args'])

class BaseProcess(mp.Process):
    """A process backed by an internal queue for simple one-way message passing.
    """
    def __init__(self, *args, **kwargs):
        super().__init__(*args, **kwargs)
        self.queue = mp.Queue()

    def send(self, event, *args):
        """Puts the event and args as a `Msg` on the queue
        """
       msg = Msg(event, args)
       self.queue.put(msg)

    def dispatch(self, msg):
        event, args = msg

        handler = getattr(self, "do_%s" % event, None)
        if not handler:
            raise NotImplementedError("Process has no handler for [%s]" % event)

        handler(*args)

    def run(self):
        while True:
            msg = self.queue.get()
            self.dispatch(msg)

Usage:

class MyProcess(BaseProcess):
    def do_helloworld(self, arg1, arg2):
        print(arg1, arg2)

if __name__ == "__main__":
    process = MyProcess()
    process.start()
    process.send('helloworld', 'hello', 'world')

The send happens in the parent process, the do_* happens in the child process.

I left out any exception handling that would obviously interrupt the run loop and exit the child process. You can also customize it by overriding run to control blocking or whatever else.

This is really only useful in situations where you have a single worker process, but I think it's a relevant answer to this question to demonstrate a common scenario with a little more object-orientation.

I think you can achieve this the quickest by using the where function:

For example looking for items greater than 0.2 in a numpy array and replacing those with 0:

import numpy as np

nums = np.random.rand(4,3)

print np.where(nums > 0.2, 0, nums)

self::staticMethod();

More information about the Static keyword.

List<Car> cars = new List<Car>() {  new Car() { Name = "Ford", Year = 1892, Website = "www.ford.us" }, 
                                    new Car() { Name = "Jaguar", Year = 1892, Website = "www.jaguar.co.uk" }, 
                                    new Car() { Name = "Honda", Year = 1892, Website = "www.honda.jp"} };

List<Factory> factories = new List<Factory>() {     new Factory() { Name = "Ferrari", Website = "www.ferrari.it" }, 
                                                    new Factory() { Name = "Jaguar", Website = "www.jaguar.co.uk" }, 
                                                    new Factory() { Name = "BMW", Website = "www.bmw.de"} };

foreach (Car car in cars.Where(c => !factories.Any(f => f.Name == c.Name))) {
    lblDebug.Text += car.Name;
}

If speed is your primary concern, then I'd simply go with

double r = (double)rand() / (double)RAND_MAX;

If you are using a "Standard TCP/IP over SSH" type of connection, under "Preferences"->"Others" there is "SSH KeepAlive" field. It took me quite a while to find it :(

Given this .env file:

DB_NAME=foo
DB_USER=bar
DB_PASSWORD=baz

And this mongo-init.sh file:

mongo --eval "db.auth('$MONGO_INITDB_ROOT_USERNAME', '$MONGO_INITDB_ROOT_PASSWORD'); db = db.getSiblingDB('$DB_NAME'); db.createUser({ user: '$DB_USER', pwd: '$DB_PASSWORD', roles: [{ role: 'readWrite', db: '$DB_NAME' }] });"

This docker-compose.yml will create the admin database and admin user, authenticate as the admin user, then create the real database and add the real user:

version: '3'

services:
#  app:
#    build: .
#    env_file: .env
#    environment:
#      DB_HOST: 'mongodb://mongodb'

  mongodb:
    image: mongo:4
    environment:
      MONGO_INITDB_ROOT_USERNAME: admin-user
      MONGO_INITDB_ROOT_PASSWORD: admin-password
      DB_NAME: $DB_NAME
      DB_USER: $DB_USER
      DB_PASSWORD: $DB_PASSWORD
    ports:
      - 27017:27017
    volumes:
      - db-data:/data/db
      - ./mongo-init.sh:/docker-entrypoint-initdb.d/mongo-init.sh

volumes:
  db-data:

Another way to change data type using migration

step1: You need to remove the faulted data type field name using migration

ex:

rails g migration RemoveFieldNameFromTableName field_name:data_type

Here don't forget to specify data type for your field

Step 2: Now you can add field with correct data type

ex:

rails g migration AddFieldNameToTableName field_name:data_type

That's it, now your table will added with correct data type field, Happy ruby coding!!

Simply

array.splice(array.indexOf(item), 1);

.First will throw an exception when there are no results. .FirstOrDefault won't, it will simply return either null (reference types) or the default value of the value type. (e.g like 0 for an int.) The question here is not when you want the default type, but more: Are you willing to handle an exception or handle a default value? Since exceptions should be exceptional, FirstOrDefault is preferred when you're not sure if you're going to get results out of your query. When logically the data should be there, exception handling can be considered.

Skip() and Take() are normally used when setting up paging in results. (Like showing the first 10 results, and the next 10 on the next page, etc.)

Hope this helps.

ASP.NET projects:

• Right click a webpage (.aspx, or on a folder)
• Select Browse With...
• Choose your browser
• Click Set as Default
• Click Browse

ASP.NET MVC 1 projects:

Right click Default.aspx, then follow steps above.

ASP.NET MVC 2 projects:

As there is no Default.aspx, you need to create a Web Form (right-click project > Add > New Item) and follow the steps above.

I think there is also an interesting point that was not shared on this PUT vs POST question:

If you want to have a web application that works without JavaScript (for example if someone is using a command-line browser like Lynx or a browser addon like NoScript or uMatrix), you will have to use POST to send data since HTML forms only support GET and POST HTTP requests.

Basically if you want to use progressive enhancement (https://en.wikipedia.org/wiki/Progressive_enhancement) to make your web application work everywhere, with and without JavaScript, you cannot use other HTTP methods like PUT or DELETE, which were only added in HTTP version 1.1.

You can use GCD (in the example with a 10 second delay):

Swift 2

let triggerTime = (Int64(NSEC_PER_SEC) * 10)
dispatch_after(dispatch_time(DISPATCH_TIME_NOW, triggerTime), dispatch_get_main_queue(), { () -> Void in
    self.functionToCall()
})

Swift 3 and Swift 4

DispatchQueue.main.asyncAfter(deadline: .now() + 10.0, execute: {
    self.functionToCall()
})

Swift 5 or Later

 DispatchQueue.main.asyncAfter(deadline: .now() + 10.0) {
        //call any function
    }

You could do something like:

>>> from time import gmtime, strftime
>>> strftime("%a, %d %b %Y %H:%M:%S +0000", gmtime())
'Thu, 28 Jun 2001 14:17:15 +0000'

The full doc on the % codes are at http://docs.python.org/library/time.html

you can also create a dict with the classes themselves as keys, not necessarily the classnames

typefunc={
    int:lambda x: x*2,
    str:lambda s:'(*(%s)*)'%s
}

def transform (param):
    print typefunc[type(param)](param)

transform (1)
>>> 2
transform ("hi")
>>> (*(hi)*)

here typefunc is a dict that maps a function for each type. transform gets that function and applies it to the parameter.

of course, it would be much better to use 'real' OOP

I believe enum have a .name() in its API, pretty simple to use like this example:

private int security;
public String security(){ return Security.values()[security].name(); }
public void setSecurity(int security){ this.security = security; }

    private enum Security {
            low,
            high
    }

With this you can simply call

yourObject.security() 

and it returns high/low as String, in this example

The question has already been answered by aaronasterling

However, someone might be interested in how the variables are stored under the hood.

Before coming to the snippet:

Closures are functions that inherit variables from their enclosing environment. When you pass a function callback as an argument to another function that will do I/O, this callback function will be invoked later, and this function will — almost magically — remember the context in which it was declared, along with all the variables available in that context.

• If a function does not use free variables it doesn't form a closure.

• If there is another inner level which uses free variables -- all previous levels save the lexical environment ( example at the end )

• function attributes func_closure in python < 3.X or __closure__ in python > 3.X save the free variables.

• Every function in python has this closure attributes, but it doesn't save any content if there is no free variables.

example: of closure attributes but no content inside as there is no free variable.

>>> def foo():
...     def fii():
...         pass
...     return fii
...
>>> f = foo()
>>> f.func_closure
>>> 'func_closure' in dir(f)
True
>>>

NB: FREE VARIABLE IS MUST TO CREATE A CLOSURE.

I will explain using the same snippet as above:

>>> def make_printer(msg):
...     def printer():
...         print msg
...     return printer
...
>>> printer = make_printer('Foo!')
>>> printer()  #Output: Foo!

And all Python functions have a closure attribute so let's examine the enclosing variables associated with a closure function.

Here is the attribute func_closure for the function printer

>>> 'func_closure' in dir(printer)
True
>>> printer.func_closure
(<cell at 0x108154c90: str object at 0x108151de0>,)
>>>

The closure attribute returns a tuple of cell objects which contain details of the variables defined in the enclosing scope.

The first element in the func_closure which could be None or a tuple of cells that contain bindings for the function’s free variables and it is read-only.

>>> dir(printer.func_closure[0])
['__class__', '__cmp__', '__delattr__', '__doc__', '__format__', '__getattribute__',
 '__hash__', '__init__', '__new__', '__reduce__', '__reduce_ex__', '__repr__', 
 '__setattr__',  '__sizeof__', '__str__', '__subclasshook__', 'cell_contents']
>>>

Here in the above output you can see cell_contents, let's see what it stores:

>>> printer.func_closure[0].cell_contents
'Foo!'    
>>> type(printer.func_closure[0].cell_contents)
<type 'str'>
>>>

So, when we called the function printer(), it accesses the value stored inside the cell_contents. This is how we got the output as 'Foo!'

Again I will explain using the above snippet with some changes:

 >>> def make_printer(msg):
 ...     def printer():
 ...         pass
 ...     return printer
 ...
 >>> printer = make_printer('Foo!')
 >>> printer.func_closure
 >>>

In the above snippet, I din't print msg inside the printer function, so it doesn't create any free variable. As there is no free variable, there will be no content inside the closure. Thats exactly what we see above.

Now I will explain another different snippet to clear out everything Free Variable with Closure:

>>> def outer(x):
...     def intermediate(y):
...         free = 'free'
...         def inner(z):
...             return '%s %s %s %s' %  (x, y, free, z)
...         return inner
...     return intermediate
...
>>> outer('I')('am')('variable')
'I am free variable'
>>>
>>> inter = outer('I')
>>> inter.func_closure
(<cell at 0x10c989130: str object at 0x10c831b98>,)
>>> inter.func_closure[0].cell_contents
'I'
>>> inn = inter('am')

So, we see that a func_closure property is a tuple of closure cells, we can refer them and their contents explicitly -- a cell has property "cell_contents"

>>> inn.func_closure
(<cell at 0x10c9807c0: str object at 0x10c9b0990>, 
 <cell at 0x10c980f68: str object at   0x10c9eaf30>, 
 <cell at 0x10c989130: str object at 0x10c831b98>)
>>> for i in inn.func_closure:
...     print i.cell_contents
...
free
am 
I
>>>

Here when we called inn, it will refer all the save free variables so we get I am free variable

>>> inn('variable')
'I am free variable'
>>>

Same as above, might help some people.

setTimeout(() => {
  if (pushToken!=null && deviceId!=null) {
    console.log("pushToken & OS ");
    this.setState({ pushToken: pushToken});
    this.setState({ deviceId: deviceId });
    console.log("pushToken & OS "+pushToken+"\n"+deviceId);
  }
}, 1000);

1. Open postman.
2. go to "header" field.
3. there one can see "key value" blanks.
4. in key type "Authorization".
5. in value type "Bearer(space)your_access_token_value".

Done!

This is not my prefered way to do this, cause of massive CPU consumption.

If that is actually your working code, then just keep it like that. Checking a boolean once a second causes NO measurable CPU load. None whatsoever.

The real problem is that the thread that checks the value may not see a change that has happened for an arbitrarily long time due to caching. To ensure that the value is always synchronized between threads, you need to put the volatile keyword in the variable definition, i.e.

private volatile boolean value;

Note that putting the access in a synchronized block, such as when using the notification-based solution described in other answers, will have the same effect.

public void itemListToJsonConvert(ArrayList<HashMap<String, String>> list) {

        JSONObject jResult = new JSONObject();// main object
        JSONArray jArray = new JSONArray();// /ItemDetail jsonArray

        for (int i = 0; i < list.size(); i++) {
            JSONObject jGroup = new JSONObject();// /sub Object

            try {
                jGroup.put("ItemMasterID", list.get(i).get("ItemMasterID"));
                jGroup.put("ID", list.get(i).get("id"));
                jGroup.put("Name", list.get(i).get("name"));
                jGroup.put("Category", list.get(i).get("category"));

                jArray.put(jGroup);

                // /itemDetail Name is JsonArray Name
                jResult.put("itemDetail", jArray);
                return jResult;
            } catch (JSONException e) {
                e.printStackTrace();
            }
        }

    }

This works:

    for i,r in data[::-1].iterrows():
        print(r['Odd'], r['Even'])

greatestValue=> try this its very easy

$a=array(10,20,52,105,56,89,96);
$c=0;
foreach($a as $b)
{
if($b>$c)
$c=$b;

}
echo $c;

There's no reason for the {} command not to work. The semi-obvious questions are:

1. You are sure that the product is actually installed! There's something in ARP/Programs&Features.

2. The original install is in fact visible in the current context. It looks as if it might have been a per-user install, and if you are logged in as somebody else now then it won't know about it - you'd need to log in under the same account as the original install.

3. If the \windows\installer directory was damaged the cached file would be missing, and that's used to do the uninstall.

In a class that extends a javax.swing.JFrame use method setIconImage.

this.setIconImage(new ImageIcon(getClass().getResource("/resource/icon.png")).getImage());

You can use the classes found in the System.Json Namespace which were added in .NET 4.5. You need to add a reference to the System.Runtime.Serialization assembly

The JsonValue.Parse() Method parses JSON text and returns a JsonValue:

JsonValue value = JsonValue.Parse(@"{ ""name"":""Prince Charming"", ...");

If you pass a string with a JSON object, you should be able to cast the value to a JsonObject:

using System.Json;


JsonObject result = value as JsonObject;

Console.WriteLine("Name .... {0}", (string)result["name"]);
Console.WriteLine("Artist .. {0}", (string)result["artist"]);
Console.WriteLine("Genre ... {0}", (string)result["genre"]);
Console.WriteLine("Album ... {0}", (string)result["album"]);

The classes are quite similar to those found in the System.Xml.Linq Namespace.

If the array is sorted in ascending or descending order then you can find it with complexity O(1). For an array of ascending order the first element is the smallest element, you can get it by arr[0] (0 based indexing). If the array is sorted in descending order then the last element is the smallest element,you can get it by arr[sizeOfArray-1].

If the array is not sorted then you have to iterate over the array to get the smallest element.In this case time complexity is O(n), here n is the size of array.

int arr[] = {5,7,9,0,-3,2,3,4,56,-7};
int smallest_element=arr[0] //let, first element is the smallest one

for(int i =1;i<sizeOfArray;i++)  
{
    if(arr[i]<smallest_element)
    {
     smallest_element=arr[i];
    }
}

You can calculate it in input section (when you have to find smallest element from a given array)

int smallest_element;
int arr[100],n;
cin>>n;
for(int i = 0;i<n;i++)
{
cin>>arr[i];
if(i==0)
{
    smallest_element=arr[i]; //smallest_element=arr[0];
}
else if(arr[i]<smallest_element)
{
smallest_element = arr[i];
}
}

Also you can get smallest element by built in function

#inclue<algorithm>
int smallest_element = *min_element(arr,arr+n); //here n is the size of array

You can get smallest element of any range by using this function such as,

int arr[] = {3,2,1,-1,-2,-3};
cout<<*min_element(arr,arr+3); //this will print 1,smallest element of first three element
cout<<*min_element(arr+2,arr+5); // -2, smallest element between third and fifth element (inclusive) 

I have used asterisk (*), before min_element() function. Because it returns pointer of smallest element. All codes are in c++. You can find the maximum element in opposite way.

When you have that function defined on a different dll or lib, so that the compiler defers to the linker to find it. Typical case is when you are calling functions from the OS API.

This was the least bad answer I could come up with.

import org.apache.commons.lang3.tuple.ImmutablePair;
import org.apache.commons.lang3.tuple.Pair;

public class Test {

    public static <T, L, R> Pair<L, R> splitStream(Stream<T> inputStream, Predicate<T> predicate,
            Function<Stream<T>, L> trueStreamProcessor, Function<Stream<T>, R> falseStreamProcessor) {

        Map<Boolean, List<T>> partitioned = inputStream.collect(Collectors.partitioningBy(predicate));
        L trueResult = trueStreamProcessor.apply(partitioned.get(Boolean.TRUE).stream());
        R falseResult = falseStreamProcessor.apply(partitioned.get(Boolean.FALSE).stream());

        return new ImmutablePair<L, R>(trueResult, falseResult);
    }

    public static void main(String[] args) {

        Stream<Integer> stream = Stream.iterate(0, n -> n + 1).limit(10);

        Pair<List<Integer>, String> results = splitStream(stream,
                n -> n > 5,
                s -> s.filter(n -> n % 2 == 0).collect(Collectors.toList()),
                s -> s.map(n -> n.toString()).collect(Collectors.joining("|")));

        System.out.println(results);
    }

}

This takes a stream of integers and splits them at 5. For those greater than 5 it filters only even numbers and puts them in a list. For the rest it joins them with |.

outputs:

 ([6, 8],0|1|2|3|4|5)

Its not ideal as it collects everything into intermediary collections breaking the stream (and has too many arguments!)

Strangely, I didn't find anything about legends and labels in the Chart.js documentation. It seems like you can't do it with chart.js alone.

I used https://github.com/bebraw/Chart.js.legend which is extremely light, to generate the legends.

• from a directory_of_modules, you can import a specific_module.py
• this specific_module.py, can contain a Class with some_methods() or just functions()
• from a specific_module.py, you can instantiate a Class or call functions()
• from this Class, you can execute some_method()

Example:

#!/usr/bin/python3
from directory_of_modules import specific_module
instance = specific_module.DbConnect("username","password")
instance.login()

Excerpts from PEP 8 - Style Guide for Python Code:

Modules should have short and all-lowercase names.

Notice: Underscores can be used in the module name if it improves readability.

A Python module is simply a source file(*.py), which can expose:

• Class: names using the "CapWords" convention.

• Function: names in lowercase, words separated by underscores.

• Global Variables: the conventions are about the same as those for Functions.

Here is a simple class I coded for my web application. It allows for forking PHP scripts and other scripts. Works on UNIX and Windows.

class BackgroundProcess {
    static function open($exec, $cwd = null) {
        if (!is_string($cwd)) {
            $cwd = @getcwd();
        }

        @chdir($cwd);

        if (strtoupper(substr(PHP_OS, 0, 3)) == 'WIN') {
            $WshShell = new COM("WScript.Shell");
            $WshShell->CurrentDirectory = str_replace('/', '\\', $cwd);
            $WshShell->Run($exec, 0, false);
        } else {
            exec($exec . " > /dev/null 2>&1 &");
        }
    }

    static function fork($phpScript, $phpExec = null) {
        $cwd = dirname($phpScript);

        @putenv("PHP_FORCECLI=true");

        if (!is_string($phpExec) || !file_exists($phpExec)) {
            if (strtoupper(substr(PHP_OS, 0, 3)) == 'WIN') {
                $phpExec = str_replace('/', '\\', dirname(ini_get('extension_dir'))) . '\php.exe';

                if (@file_exists($phpExec)) {
                    BackgroundProcess::open(escapeshellarg($phpExec) . " " . escapeshellarg($phpScript), $cwd);
                }
            } else {
                $phpExec = exec("which php-cli");

                if ($phpExec[0] != '/') {
                    $phpExec = exec("which php");
                }

                if ($phpExec[0] == '/') {
                    BackgroundProcess::open(escapeshellarg($phpExec) . " " . escapeshellarg($phpScript), $cwd);
                }
            }
        } else {
            if (strtoupper(substr(PHP_OS, 0, 3)) == 'WIN') {
                $phpExec = str_replace('/', '\\', $phpExec);
            }

            BackgroundProcess::open(escapeshellarg($phpExec) . " " . escapeshellarg($phpScript), $cwd);
        }
    }
}

public class TestModels
{
    public Dictionary<int, dynamic> sp = new Dictionary<int, dynamic>();

    public TestModels()
    {
        sp.Add(0, new {name="Test One", age=5});
        sp.Add(1, new {name="Test Two", age=7});
    }
}

To offer a little bit more information to other's answers. You have two options regarding how to deliver the .png file to the user. The file structure should conform to the method you choose. The two options are:

1. Use the module system (import x from y) provided with react-create-app and bundle it with your JS. Place the image inside the src folder.

2. Serve it from the public folder and let Node serve the file. create-react-app also apparently comes with an environment variable e.g. <img src={process.env.PUBLIC_URL + '/img/logo.png'} />;. This means you can reference it in your React app but still have it served through Node, with your browser asking for it separately in a normal GET request.

Source: create-react-app

The else if can be used in conjunction with 'if', and 'else' to further break down the logic

//if less than zero
if( myInt < 0){
      //do something
}else if( myInt > 0 && myInt < 10){
//else if between 0 and 10      
      //do something
}else{
//else all others  
      //do something
}

Have you tried implementing InitializingBean? It sounds like exactly what you're after.

The downside is that your bean becomes Spring-aware, but in most applications that's not so bad.

Try margin: 0 auto, the div will need a fixed with.

For the host name only, use:

window.location.hostname

Updated for Swift 4

UITextView doesn't inherently have a placeholder property so you'd have to create and manipulate one programmatically using UITextViewDelegate methods. I recommend using either solution #1 or #2 below depending on the desired behavior.

Note: For either solution, add UITextViewDelegate to the class and set textView.delegate = self to use the text view’s delegate methods.

Solution #1 - If you want the placeholder to disappear as soon as the user selects the text view:

First set the UITextView to contain the placeholder text and set it to a light gray color to mimic the look of a UITextField's placeholder text. Either do so in the viewDidLoad or upon the text view's creation.

textView.text = "Placeholder"
textView.textColor = UIColor.lightGray

Then when the user begins to edit the text view, if the text view contains a placeholder (i.e. if its text color is light gray) clear the placeholder text and set the text color to black in order to accommodate the user's entry.

func textViewDidBeginEditing(_ textView: UITextView) {
    if textView.textColor == UIColor.lightGray {
        textView.text = nil
        textView.textColor = UIColor.black
    }
}

Then when the user finishes editing the text view and it's resigned as the first responder, if the text view is empty, reset its placeholder by re-adding the placeholder text and setting its color to light gray.

func textViewDidEndEditing(_ textView: UITextView) {
    if textView.text.isEmpty {
        textView.text = "Placeholder"
        textView.textColor = UIColor.lightGray
    }
}

Solution #2 - If you want the placeholder to show whenever the text view is empty, even if the text view’s selected:

First set the placeholder in the viewDidLoad:

textView.text = "Placeholder"
textView.textColor = UIColor.lightGray

textView.becomeFirstResponder()

textView.selectedTextRange = textView.textRange(from: textView.beginningOfDocument, to: textView.beginningOfDocument)

(Note: Since the OP wanted to have the text view selected as soon as the view loads, I incorporated text view selection into the above code. If this is not your desired behavior and you do not want the text view selected upon view load, remove the last two lines from the above code chunk.)

Then utilize the shouldChangeTextInRange UITextViewDelegate method, like so:

func textView(_ textView: UITextView, shouldChangeTextIn range: NSRange, replacementText text: String) -> Bool {

    // Combine the textView text and the replacement text to
    // create the updated text string
    let currentText:String = textView.text
    let updatedText = (currentText as NSString).replacingCharacters(in: range, with: text)

    // If updated text view will be empty, add the placeholder
    // and set the cursor to the beginning of the text view
    if updatedText.isEmpty {

        textView.text = "Placeholder"
        textView.textColor = UIColor.lightGray

        textView.selectedTextRange = textView.textRange(from: textView.beginningOfDocument, to: textView.beginningOfDocument)
    }

    // Else if the text view's placeholder is showing and the
    // length of the replacement string is greater than 0, set 
    // the text color to black then set its text to the
    // replacement string
     else if textView.textColor == UIColor.lightGray && !text.isEmpty {
        textView.textColor = UIColor.black
        textView.text = text
    }

    // For every other case, the text should change with the usual
    // behavior...
    else {
        return true
    }

    // ...otherwise return false since the updates have already
    // been made
    return false
}

And also implement textViewDidChangeSelection to prevent the user from changing the position of the cursor while the placeholder's visible. (Note: textViewDidChangeSelection is called before the view loads so only check the text view's color if the window is visible):

func textViewDidChangeSelection(_ textView: UITextView) {
    if self.view.window != nil {
        if textView.textColor == UIColor.lightGray {
            textView.selectedTextRange = textView.textRange(from: textView.beginningOfDocument, to: textView.beginningOfDocument)
        }
    }
}

• **: exponentiation
• ^: exclusive-or (bitwise)
• %: modulus
• //: divide with integral result (discard remainder)

This will surely work:

UPDATE table1
SET table1.price=(SELECT table2.price
  FROM table2
  WHERE table2.id=table1.id AND table2.item=table1.item);

for UNIQUEIDENTIFIER datatype in sql server try this

Alter table table_name
add ID UNIQUEIDENTIFIER not null unique default(newid())

If you want to create primary key out of that column use this

ALTER TABLE table_name
ADD CONSTRAINT PK_name PRIMARY KEY (ID);

You can nohup it, but I prefer screen.

To suppress the page number on the first page, add \thispagestyle{empty} after the \maketitle command.

The second page of the document will then be numbered "2". If you want this page to be numbered "1", you can add \pagenumbering{arabic} after the \clearpage command, and this will reset the page number.

Here's a complete minimal example:

\documentclass[notitlepage]{article}

\title{My Report}
\author{My Name}

\begin{document}
\maketitle
\thispagestyle{empty}

\begin{abstract}
\ldots
\end{abstract}

\clearpage
\pagenumbering{arabic} 

\section{First Section}
\ldots

\end{document}

This is all you need to do:

$((COUNTER++))

Here's an excerpt from Learning the bash Shell, 3rd Edition, pp. 147, 148:

bash arithmetic expressions are equivalent to their counterparts in the Java and C languages.[9] Precedence and associativity are the same as in C. Table 6-2 shows the arithmetic operators that are supported. Although some of these are (or contain) special characters, there is no need to backslash-escape them, because they are within the $((...)) syntax.

..........................

The ++ and - operators are useful when you want to increment or decrement a value by one.[11] They work the same as in Java and C, e.g., value++ increments value by 1. This is called post-increment; there is also a pre-increment: ++value. The difference becomes evident with an example:

$ i=0
$ echo $i
0
$ echo $((i++))
0
$ echo $i
1
$ echo $((++i))
2
$ echo $i
2

See http://www.safaribooksonline.com/a/learning-the-bash/7572399/

No need to define a new interface when you can use an existing one: android.os.Handler.Callback. Pass an object of type Callback, and invoke callback's handleMessage(Message msg).