change PYTHONHOME to the parent folder of the bin file of python, like /usr,which is the parent folder of /usr/bin.

In my opinion this is a serious language flaw that puts SQL light years behind other languages. This is my incredibly hacky workaround. It is a total kludge but it always works.

Before I do I want to draw attention to @Peter Mortensen's answer, which in my opinion is the correct answer. The only reason I do the below instead is because most implementations of SQL have incredibly slow join operations and force you to break "don't repeat yourself". I need my queries to populate fast.

Also this is an old way of doing things. STRING_AGG and STRING_SPLIT are a lot cleaner. Again I do it this way because it always works.

-- remember Substring is 1 indexed, not 0 indexed
SELECT ProductId
  , SUBSTRING (
      MAX(enc.pnameANDoq), 1, CHARINDEX(';', MAX(enc.pnameANDoq)) - 1
    ) AS ProductName
  , SUM ( CAST ( SUBSTRING (
      MAX(enc.pnameAndoq), CHARINDEX(';', MAX(enc.pnameANDoq)) + 1, 9999
    ) AS INT ) ) AS OrderQuantity
FROM (
    SELECT CONCAT (ProductName, ';', CAST(OrderQuantity AS VARCHAR(10)))
      AS pnameANDoq, ProductID
    FROM OrderDetails
  ) enc
GROUP BY ProductId

Or in plain language :

• Glue everything except one field together into a string with a delimeter you know won't be used
• Use substring to extract the data after it's grouped

Performance wise I have always had superior performance using strings over things like, say, bigints. At least with microsoft and oracle substring is a fast operation.

This avoids the problems you run into when you use MAX() where when you use MAX() on multiple fields they no longer agree and come from different rows. In this case your data is guaranteed to be glued together exactly the way you asked it to be.

To access a 3rd or 4th field, you'll need nested substrings, "after the first semicolon look for a 2nd". This is why STRING_SPLIT is better if it is available.

Note : While outside the scope of your question this is especially useful when you are in the opposite situation and you're grouping on a combined key, but don't want every possible permutation displayed, that is you want to expose 'foo' and 'bar' as a combined key but want to group by 'foo'

Here's yet another, but I feel more straightforward and intuitive (or at least natural if you're used to Promises), approach. Basically, you create an Observable using Observable.create() to wrap one and two as a single Observable. This is very similar to how Promise.all() may work.

var first = someObservable.take(1);
var second = Observable.create((observer) => {
  return first.subscribe(
    function onNext(value) {
      /* do something with value like: */
      // observer.next(value);
    },
    function onError(error) {
      observer.error(error);
    },
    function onComplete() {
      someOtherObservable.take(1).subscribe(
        function onNext(value) {
          observer.next(value);
        },
        function onError(error) {
          observer.error(error);
        },
        function onComplete() {
          observer.complete();
        }
      );
    }
  );
});

So, what's going on here? First, we create a new Observable. The function passed to Observable.create(), aptly named onSubscription, is passed the observer (built from the parameters you pass to subscribe()), which is similar to resolve and reject combined into a single object when creating a new Promise. This is how we make the magic work.

In onSubscription, we subscribe to the first Observable (in the example above, this was called one). How we handle next and error is up to you, but the default provided in my sample should be appropriate generally speaking. However, when we receive the complete event, which means one is now done, we can subscribe to the next Observable; thereby firing the second Observable after the first one is complete.

The example observer provided for the second Observable is fairly simple. Basically, second now acts like what you would expect two to act like in the OP. More specifically, second will emit the first and only the first value emitted by someOtherObservable (because of take(1)) and then complete, assuming there is no error.

Example

Here is a full, working example you can copy/paste if you want to see my example working in real life:

var someObservable = Observable.from([1, 2, 3, 4, 5]);
var someOtherObservable = Observable.from([6, 7, 8, 9]);

var first = someObservable.take(1);
var second = Observable.create((observer) => {
  return first.subscribe(
    function onNext(value) {
      /* do something with value like: */
      observer.next(value);
    },
    function onError(error) {
      observer.error(error);
    },
    function onComplete() {
      someOtherObservable.take(1).subscribe(
        function onNext(value) {
          observer.next(value);
        },
        function onError(error) {
          observer.error(error);
        },
        function onComplete() {
          observer.complete();
        }
      );
    }
  );
}).subscribe(
  function onNext(value) {
    console.log(value);
  },
  function onError(error) {
    console.error(error);
  },
  function onComplete() {
    console.log("Done!");
  }
);

If you watch the console, the above example will print:

1

6

Done!

Just to say one thing, WindowsAPICodePack can not open CommonOpenFileDialog on Windows 7 6.1.7600.

Alternatively if you don't need to decode the file, such as uploading the file to a website, open(filename, 'rb')

where r = reading, b = binary

M-x customize-face RET default will allow you to set the face default face, on which all other faces base on. There you can set the font-size.

Here is what is in my .emacs. actually, color-theme will set the basics, then my custom face setting will override some stuff. the custom-set-faces is written by emacs's customize-face mechanism:

;; my colour theme is whateveryouwant :)
(require 'color-theme)
(color-theme-initialize)
(color-theme-whateveryouwant)

(custom-set-faces
  ;; custom-set-faces was added by Custom.
  ;; If you edit it by hand, you could mess it up, so be careful.
  ;; Your init file should contain only one such instance.
  ;; If there is more than one, they won't work right.
 '(default ((t (:stipple nil :background "white" :foreground "black" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 98 :width normal :foundry "unknown" :family "DejaVu Sans Mono"))))
 '(font-lock-comment-face ((t (:foreground "darkorange4"))))
 '(font-lock-function-name-face ((t (:foreground "navy"))))
 '(font-lock-keyword-face ((t (:foreground "red4"))))
 '(font-lock-type-face ((t (:foreground "black"))))
 '(linum ((t (:inherit shadow :background "gray95"))))
 '(mode-line ((t (nil nil nil nil :background "grey90" (:line-width -1 :color nil :style released-button) "black" :box nil :width condensed :foundry "unknown" :family "DejaVu Sans Mono")))))

a=10

isinstance(a,int)  #True

b='abc'

isinstance(b,int)  #False

After some research, I think the best answer is Xerces, as it implements all of XSD, is cross-platform and widely used. I've created a small Java project on github to validate from the command line using the default JRE parser, which is normally Xerces. This can be used on Windows/Mac/Linux.

There is also a C++ version of Xerces available if you'd rather use that. The StdInParse utility can be used to call it from the command line. Also, a commenter below points to this more complete wrapper utility.

You could also use xmllint, which is part of libxml. You may well already have it installed. Example usage:

xmllint --noout --schema XSD_FILE XML_FILE

One problem is that libxml doesn't implement all of the specification, so you may run into issues :(

Alternatively, if you are on Windows, you can use msxml, but you will need some sort of wrapper to call it, such as the GUI one described in this DDJ article. However, it seems most people on Windows use an XML Editor, such as Notepad++ (as described in Nate's answer) or XML Notepad 2007 as suggested by SteveC (there are also several commercial editors which I won't mention here).

Finally, you'll find different programs will, unfortunately, give different results. This is largely due to the complexity of the XSD spec. You may want to test your schema with several tools.

UPDATE: I've expanded on this in a blog post.

Use -e option, then you can print new line character with \n in the string.

Sample (but not sure whether a good one or not)

The fun thing is that -e option is not documented in MacOS's man page while still usable. It is documented in the man page of Linux.

In some cases, nvl(sum(column_name),0) is also required. You may want to consider your scenarios.

For example, I am trying to fetch the sum of a particular column, from a particular table based on certain conditions. Based on the conditions,

1. one or more rows exist in the table. In this case I want the sum.
2. rows do not exist. In this case I want 0.

If you use sum(nvl(column_name,0)) here, it would give you null. What you might want is nvl(sum(column_name),0).

This may be required especially when you are passing this result to, say, java, have the datatype as number there because then this will not require special null handling.

You can install a tarball without extracting it first. Just navigate to the directory containing your .tar.gz file from your command prompt and enter this command:

pip install my-tarball-file-name.tar.gz

I am running python 3.4.3 and this works for me. I can't tell if this would work on other versions of python though.

You could use

Calendar cal = Calendar.getInstance();
cal.setTime(beginupd);
long millis = cal.getTimeInMillis();

I went a different route. Since I know I'll be adding something into a row/column one by one, I find out the last row by first counting the fields that have data. I'll demonstrate this with a column:

=COUNT(A5:A34)

So, let's say that returned 21. A5 is 4 rows down, so I need to get the 21st position from the 4th row down. I can do this using inderect, like so:

=INDIRECT("A"&COUNT(A5:A34)+4)

It's finding the amount of rows with data, and returning me a number I'm using as an index modifier.

Accepted answer doesn't work with "use strict" as the "with" statement throws an error. So instead:

$.post(url, function (data) {
    var w = window.open('about:blank', 'windowname');
    w.document.write(data);
    w.document.close();
});

Also, make sure 'windowname' doesn't have any spaces in it because that will fail in IE :)

Use this code fist of your code:

header('Cache-Control: no-cache, no-store, must-revalidate');
header('Pragma: no-cache');
header('Expires: 0');

This works for me.

You need to set the logger level to the lowest you want to display. For example, if you want to display DEBUG messages, you need to set the logger level to DEBUG.

The Apache log4j manual has a section on Configuration.

It seems that you are looking to parse commandline arguments into your bash script. I have searched for this recently myself. I came across the following which I think will assist you in parsing the arguments:

http://rsalveti.wordpress.com/2007/04/03/bash-parsing-arguments-with-getopts/

I added the snippet below as a tl;dr

#using : after a switch variable means it requires some input (ie, t: requires something after t to validate while h requires nothing.
while getopts “ht:r:p:v” OPTION
do
     case $OPTION in
         h)
             usage
             exit 1
             ;;
         t)
             TEST=$OPTARG
             ;;
         r)
             SERVER=$OPTARG
             ;;
         p)
             PASSWD=$OPTARG
             ;;
         v)
             VERBOSE=1
             ;;
         ?)
             usage
             exit
             ;;
     esac
done

if [[ -z $TEST ]] || [[ -z $SERVER ]] || [[ -z $PASSWD ]]
then
     usage
     exit 1
fi

./script.sh -t test -r server -p password -v

You need MouseClick instead of Click event handler, reference.

switch (e.Button) {

    case MouseButtons.Left:
    // Left click
    break;

    case MouseButtons.Right:
    // Right click
    break;
    ...
}

This function can split the entire text of Huckleberry Finn into sentences in about 0.1 seconds and handles many of the more painful edge cases that make sentence parsing non-trivial e.g. "Mr. John Johnson Jr. was born in the U.S.A but earned his Ph.D. in Israel before joining Nike Inc. as an engineer. He also worked at craigslist.org as a business analyst."

# -*- coding: utf-8 -*-
import re
alphabets= "([A-Za-z])"
prefixes = "(Mr|St|Mrs|Ms|Dr)[.]"
suffixes = "(Inc|Ltd|Jr|Sr|Co)"
starters = "(Mr|Mrs|Ms|Dr|He\s|She\s|It\s|They\s|Their\s|Our\s|We\s|But\s|However\s|That\s|This\s|Wherever)"
acronyms = "([A-Z][.][A-Z][.](?:[A-Z][.])?)"
websites = "[.](com|net|org|io|gov)"

def split_into_sentences(text):
    text = " " + text + "  "
    text = text.replace("\n"," ")
    text = re.sub(prefixes,"\\1<prd>",text)
    text = re.sub(websites,"<prd>\\1",text)
    if "Ph.D" in text: text = text.replace("Ph.D.","Ph<prd>D<prd>")
    text = re.sub("\s" + alphabets + "[.] "," \\1<prd> ",text)
    text = re.sub(acronyms+" "+starters,"\\1<stop> \\2",text)
    text = re.sub(alphabets + "[.]" + alphabets + "[.]" + alphabets + "[.]","\\1<prd>\\2<prd>\\3<prd>",text)
    text = re.sub(alphabets + "[.]" + alphabets + "[.]","\\1<prd>\\2<prd>",text)
    text = re.sub(" "+suffixes+"[.] "+starters," \\1<stop> \\2",text)
    text = re.sub(" "+suffixes+"[.]"," \\1<prd>",text)
    text = re.sub(" " + alphabets + "[.]"," \\1<prd>",text)
    if "”" in text: text = text.replace(".”","”.")
    if "\"" in text: text = text.replace(".\"","\".")
    if "!" in text: text = text.replace("!\"","\"!")
    if "?" in text: text = text.replace("?\"","\"?")
    text = text.replace(".",".<stop>")
    text = text.replace("?","?<stop>")
    text = text.replace("!","!<stop>")
    text = text.replace("<prd>",".")
    sentences = text.split("<stop>")
    sentences = sentences[:-1]
    sentences = [s.strip() for s in sentences]
    return sentences

This is the most up-to-date solution.

<form name="frmChkForm" id="frmChkForm">
    <input type="checkbox" name="chkcc9" id="group1" />Check Me
    <input type="checkbox" name="chk9[120]" class="group1" />
    <input type="checkbox" name="chk9[140]" class="group1" />
    <input type="checkbox" name="chk9[150]" class="group1" />
</form>

$(function() {
    enable_cb();
    $("#group1").click(enable_cb);
});

function enable_cb() {
    $("input.group1").prop("disabled", !this.checked);
}

Here is the usage details for .attr() and .prop().

jQuery 1.6+

Use the new .prop() function:

$("input.group1").prop("disabled", true);
$("input.group1").prop("disabled", false);

jQuery 1.5 and below

The .prop() function is not available, so you need to use .attr().

To disable the checkbox (by setting the value of the disabled attribute) do

$("input.group1").attr('disabled','disabled');

and for enabling (by removing the attribute entirely) do

$("input.group1").removeAttr('disabled');

Any version of jQuery

If you're working with just one element, it will always be fastest to use DOMElement.disabled = true. The benefit to using the .prop() and .attr() functions is that they will operate on all matched elements.

// Assuming an event handler on a checkbox
if (this.disabled)

ref: Setting "checked" for a checkbox with jQuery?

Use FractionallySizedBox widget.

FractionallySizedBox(
  widthFactor: 1.0, // width w.r.t to parent
  heightFactor: 1.0,  // height w.r.t to parent
  child: *Your Child Here*
}

This widget is also very useful when you want to size your child at a fractional of its parent's size.

Example:

If you want the child to occupy 50% width of its parent, provide widthFactor as 0.5

Just put that line in the bat file...

Alternatively you can even make a shortcut for svcutil.exe, then add the arguments in the 'target' window.

Make sure that in the path to the project there is no foldername having whitespace. While creating a project the specified path folders must not contain any space in their naming.

just add .col-xs-12 to your responsive image. It's should work.

You can also do the following. in your form class def:

max_number = forms.ChoiceField(widget = forms.Select(), 
                 choices = ([('1','1'), ('2','2'),('3','3'), ]), initial='3', required = True,)

then when calling the form in your view you can dynamically set both initial choices and choice list.

yourFormInstance = YourFormClass()

yourFormInstance.fields['max_number'].choices = [(1,1),(2,2),(3,3)]
yourFormInstance.fields['max_number'].initial = [1]

Note: the initial values has to be a list and the choices has to be 2-tuples, in my example above i have a list of 2-tuples. Hope this helps.

Try

: $(yourcommand)

: is short for "do nothing".

$() is just your command.

"std" is a namespace used for STL (Standard Template Library). Please refer to https://en.wikipedia.org/wiki/Namespace#Use_in_common_languages

You can either write using namespace std; before using any stl functions, variables or just insert std:: before them.

Annotating all model classes looks to me as an overkill and Kenny's answer didn't work for me https://stackoverflow.com/a/43271115/4437153. The result of serialization was still camel case.

I realised that there is a problem with my spring configuration, so I had to tackle that problem from another side. Hopefully someone finds it useful, but if I'm doing something against springs' rules then please let me know.

Solution for Spring MVC 5.2.5 and Jackson 2.11.2

@Configuration
@EnableWebMvc
public class WebConfig implements WebMvcConfigurer {
    @Override
    public void configureMessageConverters(List<HttpMessageConverter<?>> converters) {
        ObjectMapper objectMapper = new ObjectMapper();
        objectMapper.setPropertyNamingStrategy(PropertyNamingStrategy.SNAKE_CASE);           

        MappingJackson2HttpMessageConverter converter = new MappingJackson2HttpMessageConverter();
        converter.setObjectMapper(objectMapper);
        converters.add(converter);
    }
}

Easy task with grep:

grep -v help filename

Append > newFileName to redirect output to a new file.

Update

To clarify it, the normal behavior will be printing the lines on screen. To pipe it to a file, the > can be used. Thus, in this command:

grep -v help filename > newFileName

1. grep calls the grep program, obviously
2. -v is a flag to inverse the output. By defaulf, grep prints the lines that match the given pattern. With this flag, it will print the lines that don't match the pattern.
3. help is the pattern to match
4. filename is the name of the input file
5. > redirects the output to the following item
6. newFileName the new file where output will be saved.

As you may noticed, you will not be deleting things in your file. grep will read it and another file will be saved, modified accordingly.

Try selecting send and download instead of send when you make the request. (the blue button)

https://www.getpostman.com/docs/responses

"For binary response types, you should select Send and download which will let you save the response to your hard disk. You can then view it using the appropriate viewer."

I know there were several perfect answers but I found this page useful as well !

from: https://support.google.com/googleplay/android-developer/answer/113469?hl=en

Quote from the site:

The Feature Graphic is used for promotions on Google Play. While this graphic is not required to save and publish your Store Listing, it is required in order to be featured on Google Play.

Commentary:

To be clear, these "promotions" are chosen at Google's discretion. Even though excellent the "This is a test" app demonstration (above) shows the Feature graphic used in common areas of the outdated "Android Market", this is no longer the case with today's "Play Store".

Quote from the site:

The Promo Graphic is used for promotions on older versions of the Android OS (earlier than 4.0). This image is not required to save and publish your Store Listing.

Commentary:

It appears that this is also at Google's discretion and not always used as the "This is a test" demo suggests. Even though an older device may not get an update to their Android version, the "Android Market" update bringing them to a modern version of "Play Store" should be available.

Since the question is not restricted to Android Studio, So I am giving the path for Visual Studio 2015 (worked for Xamarin).

• Locate the database file mentioned in above image, and click on Pull button as it shown in image 2.
• Save the file in your desired location.
• You can open that file using SQLite Studio or DB Browser for SQLite.

Special Thanks to other answerers of this question.

find /path -type f \( -iname "*.jpg" -o -name "*.jpeg" -o -iname "*gif" \)

I can't comment on how efficient this is, but here's a solution:

applyToGivenRow = @(func, matrix) @(row) func(matrix(row, :))
applyToRows = @(func, matrix) arrayfun(applyToGivenRow(func, matrix), 1:size(matrix,1))'

% Example
myMx = [1 2 3; 4 5 6; 7 8 9];
myFunc = @sum;

applyToRows(myFunc, myMx)

you can use convert function :

Select convert(int,[Column1])

<object data="resume.pdf" type="application/pdf" width="100%" height="800px"> 
   <p>It appears you don't have a PDF plugin for this browser.
       No biggie... you can <a href="resume.pdf">click here to
       download the PDF file.</a>
  </p>  
</object>

Even better approach using array's join method

var countries = ['United States', 'Canada', 'Argentina', 'Armenia'];
var list = '<ul class="myList"><li class="ui-menu-item" role="menuitem"><a class="ui-all" tabindex="-1">' + countries.join('</a></li><li>') + '</li></ul>';

You may want to take a look at Pyschools, the website has quite a lot of practice questions on Python Programming.

If you are trying to simply return a string to a View, try this:

public string Test()
{
     return "test";
}

This will return a view with the word test in it. You can insert some html in the string.

You can also try this:

public ActionResult Index()
{
    return Content("<html><b>test</b></html>");
}

Repository and Service are children of Component annotation. So, all of them are Component. Repository and Service just expand it. How exactly? Service has only ideological difference: we use it for services. Repository has particular exception handler.

The opposite of the == compare operator is !=.

The object-fit property provides a non-hackish way for doing this (with image centered). It has been supported in major browsers for a few years now (Chrome/Safari since 2013, Firefox since 2015, and Edge since 2015) with the exception of Internet Explorer.

img.rounded {_x000D_
  object-fit: cover;_x000D_
  border-radius: 50%;_x000D_
  height: 100px;_x000D_
  width: 100px;_x000D_
}

<img src="http://www.electricvelocity.com.au/Upload/Blogs/smart-e-bike-side_2.jpg" class="rounded">

$.browser has been removed from JQuery 1.9. You can to use Modernizr project instead

http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed

UPDATE TO SUPPORT IE 10 AND IE 11 (TRIDENT version)

To complete the @daniel.moura answer, here is a version which support IE 11 and +

var matched, browser;

jQuery.uaMatch = function( ua ) {
    ua = ua.toLowerCase();

    var match = /(chrome)[ \/]([\w.]+)/.exec( ua ) ||
        /(webkit)[ \/]([\w.]+)/.exec( ua ) ||
        /(opera)(?:.*version|)[ \/]([\w.]+)/.exec( ua ) ||
        /(msie)[\s?]([\w.]+)/.exec( ua ) ||       
        /(trident)(?:.*? rv:([\w.]+)|)/.exec( ua ) ||
        ua.indexOf("compatible") < 0 && /(mozilla)(?:.*? rv:([\w.]+)|)/.exec( ua ) ||
        [];

    return {
        browser: match[ 1 ] || "",
        version: match[ 2 ] || "0"
    };
};

matched = jQuery.uaMatch( navigator.userAgent );
//IE 11+ fix (Trident) 
matched.browser = matched.browser == 'trident' ? 'msie' : matched.browser;
browser = {};

if ( matched.browser ) {
    browser[ matched.browser ] = true;
    browser.version = matched.version;
}

// Chrome is Webkit, but Webkit is also Safari.
if ( browser.chrome ) {
    browser.webkit = true;
} else if ( browser.webkit ) {
    browser.safari = true;
}

jQuery.browser = browser;
// log removed - adds an extra dependency
//log(jQuery.browser)

Linux: who am i | awk '{print $5}' | sed 's/[()]//g'

AIX: who am i | awk '{print $6}' | sed 's/[()]//g'

Just as an extension to @Steven Lavine answer in case you want to open the browser login window. I found it hard to properly return the Response (MDN HTTP Authentication) from the Filter in case that the user wasn't authenticated yet

This helped me to build the Response to force browser login, note the additional modification of the headers. This will set the status code to 401 and set the header that causes the browser to open the username/password dialog.

// The extended Exception class
public class NotLoggedInException extends WebApplicationException {
  public NotLoggedInException(String message) {
    super(Response.status(Response.Status.UNAUTHORIZED)
      .entity(message)
      .type(MediaType.TEXT_PLAIN)
      .header("WWW-Authenticate", "Basic realm=SecuredApp").build()); 
  }
}

// Usage in the Filter
if(headers.get("Authorization") == null) { throw new NotLoggedInException("Not logged in"); }

I was getting this error : javax.faces.application.ViewExpiredException.When I using different requests, I found those having same JsessionId, even after restarting the server. So this is due to the browser cache. Just close the browser and try, it will work.

Just add:

import os

in the beginning, before:

from settings import PROJECT_ROOT

This will import the python's module os, which apparently is used later in the code of your module without being imported.

Most answers and explanations are not to explain what is a valid string of endDate or startDate. Danny gave us two useful example.

$('#datepicker').datepicker({
    startDate: '-2m',
    endDate: '+2d'
});

But why?let's take a look at the source code at bootstrap-datetimepicker.js. There are some code begin line 1343 tell us how does it work.

if (/^[-+]\d+[dmwy]([\s,]+[-+]\d+[dmwy])*$/.test(date)) {
            var part_re = /([-+]\d+)([dmwy])/,
                parts = date.match(/([-+]\d+)([dmwy])/g),
                part, dir;
            date = new Date();
            for (var i = 0; i < parts.length; i++) {
                part = part_re.exec(parts[i]);
                dir = parseInt(part[1]);
                switch (part[2]) {
                    case 'd':
                        date.setUTCDate(date.getUTCDate() + dir);
                        break;
                    case 'm':
                        date = Datetimepicker.prototype.moveMonth.call(Datetimepicker.prototype, date, dir);
                        break;
                    case 'w':
                        date.setUTCDate(date.getUTCDate() + dir * 7);
                        break;
                    case 'y':
                        date = Datetimepicker.prototype.moveYear.call(Datetimepicker.prototype, date, dir);
                        break;
                }
            }
            return UTCDate(date.getUTCFullYear(), date.getUTCMonth(), date.getUTCDate(), date.getUTCHours(), date.getUTCMinutes(), date.getUTCSeconds(), 0);
        }

There are four kinds of expressions.

• w means week
• m means month
• y means year
• d means day

Look at the regular expression ^[-+]\d+[dmwy]([\s,]+[-+]\d+[dmwy])*$. You can do more than these -0d or +1m.

Try harder like startDate:'+1y,-2m,+0d,-1w'.And the separator , could be one of [\f\n\r\t\v,]

The whole concept is different... You don't need to manage sessions if you are trying to implement RESTFul protocol. In that case it is better to do authentication procedure on every request (whereas there is an extra cost to it in terms of performance - hashing password would be a good example. not a big deal...). If you use sessions - how can you distribute load across multiple servers? I bet RESTFul protocol is meant to eliminate sessions whatsoever - you don't really need them... That's why it is called "stateless". Sessions are only required when you cannot store anything other than Cookie on a client side after a reqest has been made (take old, non Javascript/HTML5-supporting browser as an example). In case of "full-featured" RESTFul client it is usually safe to store base64(login:password) on a client side (in memory) until the applictation is still loaded - the application is used to access to the only host and the cookie cannot be compromised by the third party scripts...

I would stronly recommend to disable cookie authentication for RESTFul sevices... check out Basic/Digest Auth - that should be enough for RESTFul based services.

Just set the img css to be display:inline or display:inline-block

You can simply use:

mvn --settings YourOwnSettings.xml clean install

or

mvn -s YourOwnSettings.xml clean install

Select * From Master..SysUsers Where IsSqlUser = 1

To actually cover your pattern, i.e, valid file names according to your rules, I think that you need a little more. Note this doesn't match legal file names from a system perspective. That would be system dependent and more liberal in what it accepts. This is intended to match your acceptable patterns.

^([a-zA-Z0-9]+[_-])*[a-zA-Z0-9]+\.[a-zA-Z0-9]+$

Explanation:

• ^ Match the start of a string. This (plus the end match) forces the string to conform to the exact expression, not merely contain a substring matching the expression.
• ([a-zA-Z0-9]+[_-])* Zero or more occurrences of one or more letters or numbers followed by an underscore or dash. This causes all names that contain a dash or underscore to have letters or numbers between them.
• [a-zA-Z0-9]+ One or more letters or numbers. This covers all names that do not contain an underscore or a dash.
• \. A literal period (dot). Forces the file name to have an extension and, by exclusion from the rest of the pattern, only allow the period to be used between the name and the extension. If you want more than one extension that could be handled as well using the same technique as for the dash/underscore, just at the end.
• [a-zA-Z0-9]+ One or more letters or numbers. The extension must be at least one character long and must contain only letters and numbers. This is typical, but if you wanted allow underscores, that could be addressed as well. You could also supply a length range {2,3} instead of the one or more + matcher, if that were more appropriate.
• $ Match the end of the string. See the starting character.

We have had recurring problems under Linux at a customer site (Red Hat, I think), with OOMKiller (out-of-memory killer) killing both our principle application (i.e. the reason the server exists) and it's data base processes.

In each case OOMKiller simply decided that the processes were using to much resources... the machine wasn't even about to fail for lack of resources. Neither the application nor it's database has problems with memory leaks (or any other resource leak).

I am not a Linux expert, but I rather gathered it's algorithm for deciding when to kill something and what to kill is complex. Also, I was told (I can't speak as to the accuracy of this) that OOMKiller is baked into the Kernel and you can't simply not run it.

The following code changes the hexadecimal string to a byte array by parsing the string byte-by-byte.

public static byte[] ConvertHexStringToByteArray(string hexString)
{
    if (hexString.Length % 2 != 0)
    {
        throw new ArgumentException(String.Format(CultureInfo.InvariantCulture, "The binary key cannot have an odd number of digits: {0}", hexString));
    }

    byte[] data = new byte[hexString.Length / 2];
    for (int index = 0; index < data.Length; index++)
    {
        string byteValue = hexString.Substring(index * 2, 2);
        data[index] = byte.Parse(byteValue, NumberStyles.HexNumber, CultureInfo.InvariantCulture);
    }

    return data; 
}

This Solution is of O(n^2) complexity. O(1) is the space complexity.

public class longestPalindromeInAString {

        public static void main(String[] args) {
            String a =  "xyMADAMpRACECARwl"; 
            String res = "";
            //String longest = a.substring(0,1);
            //System.out.println("longest => " +longest);
            for (int i = 0; i < a.length(); i++) {
                String temp = helper(a,i,i);//even palindrome
                if(temp.length() > res.length()) {res = temp ;}
                temp = helper(a,i,i+1);// odd length palindrome
                if(temp.length() > res.length()) { res = temp ;}

            }//for
            System.out.println(res);
            System.out.println("length of " + res + " is " + res.length());

        }

        private static String helper(String a, int left, int right) {
            while(left>= 0 && right <= a.length() -1  &&  a.charAt(left) == a.charAt(right)) {
                left-- ;right++ ;
            }
            String curr = a.substring(left + 1 , right);
            System.out.println("curr =>" +curr);
            return curr ;
        }

    }

Map can also be used, but sometimes hard to read when you have lots of things going on.

map{ print "element $_\n" }   @array; 

Works for primitives and immutable classes like String, Wrapper classes Character, Byte.

int i=0,j=2   
String s1,s2  
s1 = s2 = "java rocks"

For mutable classes

Reference r1 = Reference r2 = Reference r3 = new Object();`  

Three references + one object are created. All references point to the same object and your program will misbehave.

The lstrip() method will remove leading whitespaces, newline and tab characters on a string beginning:

>>> '     hello world!'.lstrip()
'hello world!'

Edit

As balpha pointed out in the comments, in order to remove only spaces from the beginning of the string, lstrip(' ') should be used:

>>> '   hello world with 2 spaces and a tab!'.lstrip(' ')
'\thello world with 2 spaces and a tab!'

Related question:

• Trimming a string in Python

Easy Solution

Got to Start->All Programs-> Microsoft SQL Server 2012-> Configuration Tool -> Click SQL Server Configuration Manager ->Expand SQL Server Network Configuration-> Protocol ->Enable TCP/IP Right box

Double Click on TCP/IP and go to IP Adresses Tap and Put port 1433 under TCP port.

With some inspiration from other posts above, here is a full solution that combines what looks like a form-control field with an input-group-addon for a clean file input widget that includes a link to the current file.

.input-file { position: relative; margin: 60px 60px 0 } /* Remove margin, it is just for stackoverflow viewing */_x000D_
.input-file .input-group-addon { border: 0px; padding: 0px; }_x000D_
.input-file .input-group-addon .btn { border-radius: 0 4px 4px 0 }_x000D_
.input-file .input-group-addon input { cursor: pointer; position:absolute; width: 72px; z-index:2;top:0;right:0;filter: alpha(opacity=0);-ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=0)";opacity:0; background-color:transparent; color:transparent; }

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.1/css/bootstrap.min.css">_x000D_
<div class="input-group input-file">_x000D_
  <div class="form-control">_x000D_
    <a href="/path/to/your/current_file_name.pdf" target="_blank">current_file_name.pdf</a>_x000D_
  </div>_x000D_
  <span class="input-group-addon">_x000D_
    <a class='btn btn-primary' href='javascript:;'>_x000D_
      Browse_x000D_
      <input type="file" name="field_name" onchange="$(this).parent().parent().parent().find('.form-control').html($(this).val());">_x000D_
    </a>_x000D_
  </span>_x000D_
</div>

simple is the best and works in every version.

if a>10: 
    value="b"
else: 
    value="c"

Oracle can watch tables for changes and when a change occurs can execute a callback function in PL/SQL or OCI. The callback gets an object that's a collection of tables which changed, and that has a collection of rowid which changed, and the type of action, Ins, upd, del.

So you don't even go to the table, you sit and wait to be called. You'll only go if there are changes to write.

It's called Database Change Notification. It's much simpler than CDC as Justin mentioned, but both require some fancy admin stuff. The good part is that neither of these require changes to the APPLICATION.

The caveat is that CDC is fine for high volume tables, DCN is not.

For those hitting this up in the future, you can now use the Mongoid::Criteria#distinct method from Origin to select only distinct values from the database:

# Requires a Mongoid::Criteria
Attendees.all.distinct(:user_id)

http://mongoid.org/en/mongoid/docs/querying.html (v3.1.0)

I've seen occasional problems with Eclipse forgetting that built-in classes (including Object and String) exist. The way I've resolved them is to:

• On the Project menu, turn off "Build Automatically"
• Quit and restart Eclipse
• On the Project menu, choose "Clean…" and clean all projects
• Turn "Build Automatically" back on and let it rebuild everything.

This seems to make Eclipse forget whatever incorrect cached information it had about the available classes.

cmd -->

C:\Program Files\MongoDB\Server\3.2\bin>mongodump.exe --db Dintest

Another possible solution, in case you're looking for all the words in a given string, which contain a number

Pattern

\w*\d{1,}\w*

• \w* - Matches 0 or more instances of [A-Za-z0-9_]
• \d{1,} - Matches 1 or more instances of a number
• \w* - Matches 0 or more instances of [A-Za-z0-9_]

The whole point in \w* is to allow not having a character in the beginning or at the end of a word. This enables capturing the first and last words in the text.

If the goal here is to only get the numbers without the words, you can omit both \w*.

Given the string

Hello world 1 4m very happy to be here, my name is W1lly W0nk4

Matches

1 4m W1lly W0nk4

Check this example in regexr - https://regexr.com/5ff7q

Use distinct-colors.

Written in javascript.

It generates a palette of visually distinct colors.

distinct-colors is highly configurable:

• Choose how many colors are in the palette
• Restrict the hue to a specific range
• Restrict the chroma (saturation) to a specific range
• Restrict the lightness to a specific range
• Configure general quality of the palette

Its is called immediatly invoking function expression (IIFE). Mainly associated with the JavaScript closure concept. Main use is to run the function before the global variable changed, so that the expected behaviour of code can be retained.

Exception clearly indicates the problem.

CompteDAOHib: No default constructor found

For spring to instantiate your bean, you need to provide a empty constructor for your class CompteDAOHib.

You switch to:

json_decode($response->getBody(), true)

Instead of the other comment if you want it to work exactly as before in order to get arrays instead of objects.

In xaml

<TextBlock Text="{Binding CelsiusTemp}" />

In ViewModel, this way setting the value also works:

 public string CelsiusTemp
        {
            get { return string.Format("{0}°C", _CelsiusTemp); }
            set
            {
                value = value.Replace("°C", "");
              _CelsiusTemp = value;
            }
        }

Description

Instead of using a split, I think it would be easier to simply execute a match and process all the found matches.

This expression will:

• divide your sample text on the comma delimits
• will process empty values
• will ignore double quoted commas, providing double quotes are not nested
• trims the delimiting comma from the returned value
• trims surrounding quotes from the returned value

Regex: (?:^|,)(?=[^"]|(")?)"?((?(1)[^"]*|[^,"]*))"?(?=,|$)

Example

Sample Text

123,2.99,AMO024,Title,"Description, more info",,123987564

ASP example using the non-java expression

Set regEx = New RegExp
regEx.Global = True
regEx.IgnoreCase = True
regEx.MultiLine = True
sourcestring = "your source string"
regEx.Pattern = "(?:^|,)(?=[^""]|("")?)""?((?(1)[^""]*|[^,""]*))""?(?=,|$)"
Set Matches = regEx.Execute(sourcestring)
  For z = 0 to Matches.Count-1
    results = results & "Matches(" & z & ") = " & chr(34) & Server.HTMLEncode(Matches(z)) & chr(34) & chr(13)
    For zz = 0 to Matches(z).SubMatches.Count-1
      results = results & "Matches(" & z & ").SubMatches(" & zz & ") = " & chr(34) & Server.HTMLEncode(Matches(z).SubMatches(zz)) & chr(34) & chr(13)
    next
    results=Left(results,Len(results)-1) & chr(13)
  next
Response.Write "<pre>" & results

Matches using the non-java expression

Group 0 gets the entire substring which includes the comma
Group 1 gets the quote if it's used
Group 2 gets the value not including the comma

[0][0] = 123
[0][1] = 
[0][2] = 123

[1][0] = ,2.99
[1][1] = 
[1][2] = 2.99

[2][0] = ,AMO024
[2][1] = 
[2][2] = AMO024

[3][0] = ,Title
[3][1] = 
[3][2] = Title

[4][0] = ,"Description, more info"
[4][1] = "
[4][2] = Description, more info

[5][0] = ,
[5][1] = 
[5][2] = 

[6][0] = ,123987564
[6][1] = 
[6][2] = 123987564

if your eclipse is auto-closing at startup you may do this: open the properties of your shortcut and add -clean at the end of the path. or do this in cmd : cd C:\PATH_TO_YOUR_ECLIPSE\eclipse -clean like mentioned earlier above comments

If you want to move a non-checked out branch to another commit, the easiest way is running the git branch command with -f option, which determines where the branch HEAD should be pointing to:

git branch -f

Be careful as this won't work if the branch you are trying to move is your current branch. To move a branch pointer, run the following command: git update-ref -m "reset: Reset to " refs/heads/

The git update-ref command updates the object name stored in a ref safely.

Hope, my answer helped you.The source of information is this snippet.

The alternative would be to use ServletContext.getResource() which returns a URI. This URI may be a 'file:' URL, but there's no guarantee for that.

You don't need it to be a file:... URL. You just need it to be a URL that your JVM can read--and it will be.

Also, does Jenkins delete the artifacts after each build ? (not the archived artifacts, I know I can tell it to delete those)

No, Hudson/Jenkins does not, by itself, clear the workspace after a build. You might have actions in your build process that erase, overwrite, or move build artifacts from where you left them. There is an option in the job configuration, in Advanced Project Options (which must be expanded), called "Clean workspace before build" that will wipe the workspace at the beginning of a new build.

Can be done in 2 steps

1. Clone the repository

   git clone <http url>
   

2. Checkout the branch you want

   git checkout $BranchName
   

SELECT CASE WHEN COUNT(1) > 0 THEN 1 ELSE 0 END AS [Value]

FROM Sites S

WHERE S.Id = @SiteId and S.Status = 1 AND 
      (S.WebUserId = @WebUserId OR S.AllowUploads = 1)

<system.webServer>
   <modules runAllManagedModulesForAllRequests="true"/> 
 </system.webServer>

U can use above code

Another variation using MS SQL:

SELECT TYPE_NAME(system_type_id) 
FROM sys.columns 
WHERE name = 'column_name'
AND [object_id] = OBJECT_ID('[dbo].[table_name]');

It's worth mentioning that you can specify argument ranges with this syntax.

function example() {
    echo "line1 ${@:1:1}"; #First argument
    echo "line2 ${@:2:1}"; #Second argument
    echo "line3 ${@:3}"; #Third argument onwards
}

I hadn't seen it mentioned.

String target = "27-09-1991 20:29:30";
DateFormat df = new SimpleDateFormat("dd MM yyyy HH:mm:ss");
Date result =  df.parse(target);
System.out.println(result); 

This works fine?

or shorthand for vim modeline:

vim :set ts=4 sw=4 sts=4 et :

Make sure you have the prerequisite, a JVM (http://wiki.eclipse.org/Eclipse/Installation#Install_a_JVM) installed.

This will be a JRE and JDK package.

There are a number of sources which includes: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

My approach was as below. Now I just wanted my form to be validated when one specific checkbox was clicked/changed:

$('#myForm input:checkbox[name=yourChkBxName]').click(
 function(e){
  $("#myForm").valid();
}
)

On git version 2.17.1, there isn't a built-in flag to achieve this purpose.

Here's an example command to filter out the filename and line numbers from an unified diff:

git diff --unified=0 | grep -Po '^diff --cc \K.*|^@@@( -[0-9]+,[0-9]+){2} \+\K[0-9]+(?=(,[0-9]+)? @@@)' | paste -s -d':'

For example, the unified diff:

$ git diff --unified=0
diff --cc foobar
index b436f31,df63c58..0000000
--- a/foobar
+++ b/foobar
@@@ -1,2 -1,2 +1,6 @@@ Line abov
++<<<<<<< HEAD
 +bar
++=======
+ foo
++>>>>>>> Commit message

Will result in:

? git diff --unified=0 | grep -Po '^diff --cc \K.*|^@@@( -[0-9]+,[0-9]+){2} \+\K[0-9]+(?=(,[0-9]+)? @@@)' | paste -s -d':'
foobar:1

To match the output of commands in common grep match results:

$ git diff --unified=0 | grep -Po '^diff --cc \K.*|^@@@( -[0-9]+,[0-9]+){2} \+\K[0-9]+(?=(,[0-9]+)? )| @@@.*' | sed -e '0~3{s/ @@@[ ]\?//}' | sed '2~3 s/$/\n1/g' | sed "N;N;N;s/\n/:/g"
foobar:1:1:Line abov

1. grep -Po '^diff --cc \K.*|^@@@( -[0-9]+,[0-9]+){2} \+\K[0-9]+(?=(,[0-9]+)? ): Match filename from diff --cc <filename> OR Match line number from @@@ <from-file-range> <from-file-range> <to-file-range> OR Match remaining text after @@@.
2. sed -e '0~3{s/ @@@[ ]\?//}': Remove @@@[ ]\? from every 3rd line to get the optional 1 line context before ++<<<<<<< HEAD.
3. sed '2~3 s/$/\n1/g': Add \n1 every 3 lines between the 2nd and 3rd line for the column number.
4. sed "N;N;N;s/\n/:/g": Join every 3 lines with a :.

This is the one that i've tried & it works pretty well for me

$('.mybutton').on('click', function() {
       if (!$(this).data('clicked')) {
           //do your stuff here if the button is not clicked
           $(this).data('clicked', true);
       } else {
           //do your stuff here if the button is clicked
           $(this).data('clicked', false);
       }

   });

for more reference check this link JQuery toggle click

Use the P format string. This will vary by culture:

String.Format("Value: {0:P2}.", 0.8526) // formats as 85.26 % (varies by culture)

Download

Get the latest pre-built OpenCV for Android release from https://github.com/opencv/opencv/releases and unpack it (for example, opencv-4.4.0-android-sdk.zip).

Create an empty Android Studio project

Open Android Studio. Start a new project. 

Keep default target settings.

Use "Empty Activity" template. Name activity as MainActivity with a corresponding layout activity_main. Plug in your device and run the project. It should be installed and launched successfully before we'll go next.

 Add OpenCV dependency

Go to File->New->Import module

and provide a path to unpacked_OpenCV_package/sdk/java. The name of module detects automatically. Disable all features that Android Studio will suggest you on the next window.

Configure your library build.gradle (openCVLibrary build.gradle)

apply plugin: 'com.android.library'

android {
    compileSdkVersion 28
    buildToolsVersion "28.0.3"

    buildTypes {
        release {
            minifyEnabled false
            proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.txt'
        }
    }
}

Implement the library to the project (application build.gradle)

 implementation project(':openCVLibrary330')

<p style="color:black">Shop our collection of beautiful women's <br> <span> wedding ring in classic &amp; modern design.</span></p>

Remove <br> effect using CSS.

<style> p br{ display:none; } </style>

This worked for me

    Object[][] bookData = { { "col1", "col2", 3 }, { "col1", "col2", 3 }, { "col1", "col2", 3 },
            { "col1", "col2", 3 }, { "col1", "col2", 3 }, { "col1", "col2", 3 } };

    String[] headers = new String[] { "HEader 1", "HEader 2", "HEader 3" };

    int noOfColumns = headers.length;
    int rowCount = 0;

    Row rowZero = sheet.createRow(rowCount++);
    CellStyle style = workbook.createCellStyle();
    Font font = workbook.createFont();
    font.setBoldweight(Font.BOLDWEIGHT_BOLD);
    style.setFont(font);
    for (int col = 1; col <= noOfColumns; col++) {
        Cell cell = rowZero.createCell(col);
        cell.setCellValue(headers[col - 1]);
        cell.setCellStyle(style);
    }

Yes, you can get your project back. Just rename the yourproject.apk file to yourproject.zip, and you will get all the files inside that ZIP file. We are changing the file extension from .apk to .zip. From that ZIP file, extract the classes.dex file and decompile it by following way.

First, you need a tool to extract all the (compiled) classes on the DEX to a JAR. There's one called dex2jar, which is made by a Chinese student.

Then, you can use JD-GUI to decompile the classes in the JAR to source code. The resulting source code should be quite readable, as dex2jar applies some optimizations.

For Redhat Versions(Centos 7) Use the below command to install Python Development Package

Python 2.7

sudo yum install python-dev

Python 3.4

sudo yum install python34-devel

If the issue is still not resolved then try installing the below packages -

sudo yum install python-devel

sudo yum install openssl-devel

sudo yum install libffi-devel

you can use --extra-vars like this:

$ ansible all --inventory=10.0.1.2, -m ping \
    --extra-vars "ansible_user=root ansible_password=yourpassword"

If you're authenticating to a Linux host that's joined to a Microsoft Active Directory domain, this command line works.

ansible --module-name ping --extra-vars 'ansible_user=domain\user ansible_password=PASSWORD' --inventory 10.10.6.184, all

LDPI should be 36 x 36.

MDPI 48 x 48.

TVDPI 64 x 64.

HDPI 72 x 72.

XHDPI 96 x 96.

XXHDPI 144 x 144.

XXXHDPI 192 x 192.

<meta http-equiv="refresh" content="10" >

This can work. Try it..!! :-)

A simple way of doing it is:

var x = 3.2;_x000D_
var decimals = x - Math.floor(x);_x000D_
console.log(decimals); //Returns 0.20000000000000018

Unfortunately, that doesn't return the exact value. However, that is easily fixed:

var x = 3.2;_x000D_
var decimals = x - Math.floor(x);_x000D_
console.log(decimals.toFixed(1)); //Returns 0.2

You can use this if you don't know the number of decimal places:

var x = 3.2;_x000D_
var decimals = x - Math.floor(x);_x000D_
_x000D_
var decimalPlaces = x.toString().split('.')[1].length;_x000D_
decimals = decimals.toFixed(decimalPlaces);_x000D_
_x000D_
console.log(decimals); //Returns 0.2

I'm coding a chess engine named foolsmate. The best move extraction using a minimax-based tree search to depth 9 (from a certain position) took:

on Win32 configuration: ~17.0s;

after switching to x64 configuration: ~10.3s;

This is 41% of acceleration!

Just want to add my take here, as the other answers do provide reasonable explanations, but not ones that fully satisfy me.

Optional parameters are syntactic sugar for compile-time injection of the default value at the call site. This doesn't have anything to do with interfaces/implementations, and it can be seen as purely a side-effect of methods with optional parameters. So, when you call the method,

public void TestMethod(bool value = false) { /*...*/ }

like SomeClass.TestMethod(), it is actually SomeClass.TestMethod(false). If you call this method on an interface, from static type-checking, the method signature has the optional parameter. If you call this method on a deriving class's instance that doesn't have the optional parameter, from static type-checking, the method signature does not have the optional parameter, and must be called with full arguments.

Due to how optional parameters are implemented, this is the natural design result.

This is good for shallow cloning. The object spread is a standard part of ECMAScript 2018.

For deep cloning you'll need a different solution.

const clone = {...original} to shallow clone

const newobj = {...original, prop: newOne} to immutably add another prop to the original and store as a new object.

If one of the inserts fail, or any part of the command fails, does SQL server roll back the transaction?

No, it does not.

If it does not rollback, do I have to send a second command to roll it back?

Sure, you should issue ROLLBACK instead of COMMIT.

If you want to decide whether to commit or rollback the transaction, you should remove the COMMIT sentence out of the statement, check the results of the inserts and then issue either COMMIT or ROLLBACK depending on the results of the check.

To see default collation of the database:

USE db_name;
SELECT @@character_set_database, @@collation_database;

To see collation of the table:

SHOW TABLE STATUS where name like 'table_name';

To see collation of the columns:

SHOW FULL COLUMNS FROM table_name;

To see the default character set of a table

SHOW CREATE TABLE table_name;

Here is my platform specific code(unix)

public static List<File> findFiles(String dir, String... names)
    {
        LinkedList<String> command = new LinkedList<String>();
        command.add("/usr/bin/find");
        command.add(dir);
        List<File> result = new LinkedList<File>();
        if (names.length > 1)
            {
                List<String> newNames = new LinkedList<String>(Arrays.asList(names));
                String first = newNames.remove(0);
                command.add("-name");
                command.add(first);
                for (String newName : newNames)
                    {
                        command.add("-or");
                        command.add("-name");
                        command.add(newName);
                    }
            }
        else if (names.length > 0)
            {
                command.add("-name");
                command.add(names[0]);
            }
        try
            {
                ProcessBuilder pb = new ProcessBuilder(command);
                Process p = pb.start();
                p.waitFor();
                InputStream is = p.getInputStream();
                InputStreamReader isr = new InputStreamReader(is);
                BufferedReader br = new BufferedReader(isr);
                String line;
                while ((line = br.readLine()) != null)
                    {
                        // System.err.println(line);
                        result.add(new File(line));
                    }
                p.destroy();
            }
        catch (Exception e)
            {
                e.printStackTrace();
            }
        return result;
    }

Forget float, margin and html 3/5. The mail is very obsolete. You need do all with table. One line = one table. You need margin or padding ? Do another column.

Codepen

Example : i need one line with 1 One Picture of 40*40 2 One margin of 10 px 3 One text of 400px

I start my line :

<table style=" background-repeat:no-repeat; width:450px;margin:0;" cellpadding="0" cellspacing="0" border="0">
   <tr style="height:40px; width:450px; margin:0;">
     <td style="height:40px; width:40px; margin:0;">
        <img src="" style="width=40px;height40;margin:0;display:block"
     </td>
     <td style="height:40px; width:10px; margin:0;">        
     </td>
     <td style="height:40px; width:400px; margin:0;">
     <p style=" margin:0;"> my text   </p>
     </td>
   </tr>
</table>

I was trying to find the meaning of GRANT USAGE on *.* TO and found here. I can clarify that GRANT USAGE on *.* TO user IDENTIFIED BY PASSWORD password will be granted when you create the user with the following command (CREATE):

CREATE USER 'user'@'localhost' IDENTIFIED BY 'password'; 

When you grant privilege with GRANT, new privilege s will be added on top of it.

Declare a Flask endpoint to accept POST input type and then do necessary steps. Use jQuery to post the data.

from flask import request

@app.route('/parse_data', methods=['GET', 'POST'])
def parse_data(data):
    if request.method == "POST":
         #perform action here

var value = $('.textbox').val();
$.ajax({
  type: 'POST',
  url: "{{ url_for('parse_data') }}",
  data: JSON.stringify(value),
  contentType: 'application/json',
  success: function(data){
    // do something with the received data
  }
});

I recommend that you use REQUERY the specific combo box whose data you have changed AND that you do it after the Cmd.Close statement. that way, if you were inputing data, that data is also requeried.

DoCmd.Close
Forms![Form_Name]![Combo_Box_Name].Requery

you might also want to point to the recently changed value

Dim id As Integer
id = Me.[Index_Field]
DoCmd.Close
Forms![Form_Name]![Combo_Box_Name].Requery
Forms![Form_Name]![Combo_Box_Name] = id

this example supposes that you opened a form to input data into a secondary table.

let us say you save School_Index and School_Name in a School table and refer to it in a Student table (which contains only the School_Index field). while you are editing a student, you need to associate him with a school that is not in your School table, etc etc

That is a simple alert dialog, Federico gave you a site where you can look things up.

Here is a short example of how an alert dialog can be built.

new AlertDialog.Builder(this)
.setTitle("Title")
.setMessage("Do you really want to whatever?")
.setIcon(android.R.drawable.ic_dialog_alert)
.setPositiveButton(android.R.string.yes, new DialogInterface.OnClickListener() {

    public void onClick(DialogInterface dialog, int whichButton) {
        Toast.makeText(MainActivity.this, "Yaay", Toast.LENGTH_SHORT).show();
    }})
 .setNegativeButton(android.R.string.no, null).show();

I'm guessing your using mod_proxy_http (or proxy balancer).

Look in your tomcat logs (localhost.log, or catalina.log) I suspect your seeing an exception in your web stack bubbling up and closing the socket that the tomcat worker is connected to.

The usage of yield is similar to the keyword return, except that it will return a generator. And the generator object will only traverse once.

yield has two benefits:

1. You do not need to read these values twice;
2. You can get many child nodes but do not have to put them all in memory.

There is another clear explanation maybe help you.

Class file location: C:\test\com\company

File Name: Main.class

Fully qualified class name: com.company.Main

Command line command:

java  -classpath "C:\test" com.company.Main

Note here that class path does NOT include \com\company

If this is the offending line:

db.Responses.Where(y => y.ResponseId.Equals(item.ResponseId)).First();

Then it's because there is no object in Responses for which the ResponseId == item.ResponseId, and you can't get the First() record if there are no matches.

Try this instead:

var response
  = db.Responses.Where(y => y.ResponseId.Equals(item.ResponseId)).FirstOrDefault();

if (response != null)
{
    // take some alternative action
}
else
    temp.Response = response;

The FirstOrDefault() extension returns an objects default value if no match is found. For most objects (other than primitive types), this is null.

The standard mocking frameworks are creating proxy classes. This is the reason why they are technically limited to interfaces and virtual methods.

If you want to mock 'normal' methods as well, you need a tool that works with instrumentation instead of proxy generation. E.g. MS Moles and Typemock can do that. But the former has a horrible 'API', and the latter is commercial.

1.You can make overload functions.

SomeF(strin s){}   
SomeF(string s, string s2){}    
SomeF(string s1, string s2, string s3){}   

More info: http://csharpindepth.com/Articles/General/Overloading.aspx

2.or you may create one function with params

SomeF( params string[] paramArray){}
SomeF("aa","bb", "cc", "dd", "ff"); // pass as many as you like

More info: https://docs.microsoft.com/en-us/dotnet/csharp/language-reference/keywords/params

3.or you can use simple array

Main(string[] args){}

For jQuery (at least version 1.11.2) the following procedure worked for me.

1. Right click on the element and open 'Chrome Developer Tools'
2. Type $._data(($0), 'events'); in the 'Console'
3. Expand the attached objects and double click the handler: value.
4. This shows the source code of the attached function, search for part of that using the 'Search' tab.

And it's time to stop re-inventing the wheel and start using vanilla JS events ... :)

https://nssm.cc/ service helper good for create windows service by batch file i use from nssm & good working for any app & any file

The standard error is just the standard deviation divided by the square root of the sample size. So you can easily make your own function:

> std <- function(x) sd(x)/sqrt(length(x))
> std(c(1,2,3,4))
[1] 0.6454972

Using the patchwork package, you can simply use + operator:

library(ggplot2)
library(patchwork)

p1 <- ggplot(mtcars) + geom_point(aes(mpg, disp))
p2 <- ggplot(mtcars) + geom_boxplot(aes(gear, disp, group = gear))


p1 + p2

Other operators include / to stack plots to place plots side by side, and () to group elements. For example you can configure a top row of 3 plots and a bottom row of one plot with (p1 | p2 | p3) /p. For more examples, see the package documentation.

You can change the comment character to something besides # like this:

git config --global core.commentchar "@"

To fix, I deleted the app from Simulator.

I also ran Clean first.

I do not think anything orientation-related triggered it. The biggest thing that changed before this symptom started is that a Swift framework started calling NSLog on worker threads instead of main thread.

Depending on what you want to accomplish, you might replace INSERT with INSERT IGNORE in your file. This will avoid generating an error for the rows that you are trying to insert and already exist.

See http://dev.mysql.com/doc/refman/5.5/en/insert.html.

Tools --> Options --> Environment --> Fonts and Colors

An empty String is a wrapper on a char[] with no elements. You can have an empty char[]. But you cannot have an "empty" char. Like other primitives, a char has to have a value.

You say you want to "replace a character without leaving a space".

If you are dealing with a char[], then you would create a new char[] with that element removed.

If you are dealing with a String, then you would create a new String (String is immutable) with the character removed.

Here are some samples of how you could remove a char:

public static void main(String[] args) throws Exception {

    String s = "abcdefg";
    int index = s.indexOf('d');

    // delete a char from a char[]
    char[] array = s.toCharArray();
    char[] tmp = new char[array.length-1];
    System.arraycopy(array, 0, tmp, 0, index);
    System.arraycopy(array, index+1, tmp, index, tmp.length-index);
    System.err.println(new String(tmp));

    // delete a char from a String using replace
    String s1 = s.replace("d", "");
    System.err.println(s1);

    // delete a char from a String using StringBuilder
    StringBuilder sb = new StringBuilder(s);
    sb.deleteCharAt(index);
    s1 = sb.toString();
    System.err.println(s1);

}

Another possible solution if you own the website is to use inline installation.

if (chrome.app.isInstalled) {
  // extension is installed.
}

I know this an old question but this way was introduced in Chrome 15 and so I thought Id list it for anyone only now looking for an answer.

sleep doesn't work because the display can only be updated after your main thread returns to the system. NSTimer is the way to go. To do this, you need to implement methods which will be called by the timer to change the buttons. An example:

- (void)button_circleBusy:(id)sender {
    firstButton.enabled = NO;
    // 60 milliseconds is .06 seconds
    [NSTimer scheduledTimerWithTimeInterval:.06 target:self selector:@selector(goToSecondButton:) userInfo:nil repeats:NO];
}
- (void)goToSecondButton:(id)sender {
    firstButton.enabled = YES;
    secondButton.enabled = NO;
    [NSTimer scheduledTimerWithTimeInterval:.06 target:self selector:@selector(goToThirdButton:) userInfo:nil repeats:NO];
}
...

Here is a code to get the child elements (In java):

String childTag = childElement.getTagName();
if(childTag.equals("html")) 
{
    return "/html[1]"+current;
}
WebElement parentElement = childElement.findElement(By.xpath("..")); 
List<WebElement> childrenElements = parentElement.findElements(By.xpath("*"));
int count = 0;
for(int i=0;i<childrenElements.size(); i++) 
{
    WebElement childrenElement = childrenElements.get(i);
    String childrenElementTag = childrenElement.getTagName();
    if(childTag.equals(childrenElementTag)) 
    {
        count++;
    }
 }

-a option?

Cf. man page:

-a file
          Attach the given file to the message.

Result:

Content-Type: text/html: No such file or directory

People looking for SSH public key...

If you're looking to extract the public key for use with OpenSSH, you will need to get the public key a bit differently

$ ssh-keygen -y -f mykey.pem > mykey.pub

This public key format is compatible with OpenSSH. Append the public key to remote:~/.ssh/authorized_keys and you'll be good to go

docs from SSH-KEYGEN(1)

ssh-keygen -y [-f input_keyfile]  

-y This option will read a private OpenSSH format file and print an OpenSSH public key to stdout.

Sass is a language that provides features to make it easier to deal with complex styling compared to editing raw .css. An example of such a feature is allowing definition of variables that can be re-used in different styles.

The language has two alternative syntaxes:

• A JSON like syntax that is kept in files ending with .scss
• A YAML like syntax that is kept in files ending with .sass

Either of these must be compiled to .css files which are recognized by browsers.

See https://sass-lang.com/ for further information.

net Razor problems DateTime


Models
public class UsuarioFecha
{
       [DataType(DataType.DateTime)]
        [DisplayFormat(DataFormatString = "{0:yyyy/MM/dd}", ApplyFormatInEditMode = true)]
        public DateTime? dateXXX { get; set; }
}

view

@model proyect.Models.UsuarioFecha

   @Html.TextBoxFor(m => m.dateXXX , new { Value = @Html.DisplayFor(m => m.dateXXX ), @class = "form-control", @type = "date" })

Use the "has attribute" selector:

$('p[MyTag]')

Or to select one where that attribute has a specific value:

$('p[MyTag="Sara"]')

There are other selectors for "attribute value starts with", "attribute value contains", etc.

Here's the solution for GNU/Linux (Debian) users (Replace USERNAME with your username):

sudo chown -R $USER:$(id -gn $USER) /home/USERNAME/.config

The reason your main form isn't showing is because once you close the login form, your application's message pump is shut down, which causes the entire application to exit. The Windows message loop is tied to the login form because that's the one you have set as the startup form in your project properties. Look in your "Program.cs" file, and you'll see the responsible bit of code: Application.Run(new LoginForm()). Check out the documentation for that method here on MSDN, which explains this in greater detail.

The best solution is to move the code out of your login form into the "Program.cs" file. When your program first starts, you'll create and show the login form as a modal dialog (which runs on a separate message loop and blocks execution of the rest of your code until it closes). When the login dialog closes, you'll check its DialogResult property to see if the login was successful. If it was, you can start the main form using Application.Run (thus creating the main message loop); otherwise, you can exit the application without showing any form at all. Something like this:

static void Main()
{
    LoginForm fLogin = new LoginForm();
    if (fLogin.ShowDialog() == DialogResult.OK)
    {
        Application.Run(new MainForm());
    }
    else
    {
        Application.Exit();
    }
}

If you wish to use jQuery CDN other than Google hosted jQuery library, you might consider using this and ensures uses the latest version of jQuery:

<script src="http://code.jquery.com/jquery-latest.min.js" type="text/javascript"></script>

You can Use SP_Who command and kill all process that use your database and then rename your database.

>>> command = "echo a; echo b"
>>> shlex.split(command);
    ['echo', 'a; echo', 'b']

so, the problem is shlex module do not handle ";"

To check the existence of a local variable:

if 'myVar' in locals():
  # myVar exists.

To check the existence of a global variable:

if 'myVar' in globals():
  # myVar exists.

To check if an object has an attribute:

if hasattr(obj, 'attr_name'):
  # obj.attr_name exists.

The following commands are available with .NET Core SDK 2.1 (v2.1.300):

To list all installed .NET Core SDKs use: dotnet --list-sdks

To list all installed .NET Core runtimes use dotnet --list-runtimes

(tested on Windows as of writing, 03 Jun 2018, and again on 23 Aug 2018)

Update as of 24 Oct 2018: Better option is probably now dotnet --info in a terminal or PowerShell window as already mentioned in other answers.

Spring source code to explain how ApplicationContextAware work
when you use ApplicationContext context = new ClassPathXmlApplicationContext("applicationContext.xml");
In AbstractApplicationContext class,the refresh() method have the following code:

// Prepare the bean factory for use in this context.
prepareBeanFactory(beanFactory);

enter this method,beanFactory.addBeanPostProcessor(new ApplicationContextAwareProcessor(this)); will add ApplicationContextAwareProcessor to AbstractrBeanFactory.

protected void prepareBeanFactory(ConfigurableListableBeanFactory beanFactory) {
        // Tell the internal bean factory to use the context's class loader etc.
        beanFactory.setBeanClassLoader(getClassLoader());
        beanFactory.setBeanExpressionResolver(new StandardBeanExpressionResolver(beanFactory.getBeanClassLoader()));
        beanFactory.addPropertyEditorRegistrar(new ResourceEditorRegistrar(this, getEnvironment()));
        // Configure the bean factory with context callbacks.
        beanFactory.addBeanPostProcessor(new ApplicationContextAwareProcessor(this));
...........

When spring initialize bean in AbstractAutowireCapableBeanFactory, in method initializeBean,call applyBeanPostProcessorsBeforeInitialization to implement the bean post process. the process include inject the applicationContext.

@Override
    public Object applyBeanPostProcessorsBeforeInitialization(Object existingBean, String beanName)
            throws BeansException {
        Object result = existingBean;
        for (BeanPostProcessor beanProcessor : getBeanPostProcessors()) {
            result = beanProcessor.postProcessBeforeInitialization(result, beanName);
            if (result == null) {
                return result;
            }
        }
        return result;
    }

when BeanPostProcessor implement Objectto execute the postProcessBeforeInitialization method,for example ApplicationContextAwareProcessor that added before.

private void invokeAwareInterfaces(Object bean) {
        if (bean instanceof Aware) {
            if (bean instanceof EnvironmentAware) {
                ((EnvironmentAware) bean).setEnvironment(this.applicationContext.getEnvironment());
            }
            if (bean instanceof EmbeddedValueResolverAware) {
                ((EmbeddedValueResolverAware) bean).setEmbeddedValueResolver(
                        new EmbeddedValueResolver(this.applicationContext.getBeanFactory()));
            }
            if (bean instanceof ResourceLoaderAware) {
                ((ResourceLoaderAware) bean).setResourceLoader(this.applicationContext);
            }
            if (bean instanceof ApplicationEventPublisherAware) {
                ((ApplicationEventPublisherAware) bean).setApplicationEventPublisher(this.applicationContext);
            }
            if (bean instanceof MessageSourceAware) {
                ((MessageSourceAware) bean).setMessageSource(this.applicationContext);
            }
            if (bean instanceof ApplicationContextAware) {
                ((ApplicationContextAware) bean).setApplicationContext(this.applicationContext);
            }
        }
    }

I have same issue, i used simple solution

1)create sliding_out_right.xml in anim folder

  <?xml version="1.0" encoding="utf-8"?>
    <set xmlns:android="http://schemas.android.com/apk/res/android">
        <translate android:fromXDelta="0" android:toXDelta="-50%p"
            android:duration="@android:integer/config_mediumAnimTime"/>
        <alpha android:fromAlpha="1.0" android:toAlpha="0.0"
            android:duration="@android:integer/config_mediumAnimTime" />
    </set>

2) create sliding_in_left.xml in anim folder

<?xml version="1.0" encoding="utf-8"?>
<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate android:fromXDelta="50%p" android:toXDelta="0"
        android:duration="@android:integer/config_mediumAnimTime"/>
    <alpha android:fromAlpha="0.0" android:toAlpha="1.0"
        android:duration="@android:integer/config_mediumAnimTime" />
</set>

3) simply using fragment transaction setCustomeAnimations() with two custom xml and two default xml for animation as follows :-

 fragmentTransaction.setCustomAnimations(R.anim.sliding_in_left, R.anim.sliding_out_right, android.R.anim.slide_in_left, android.R.anim.slide_out_right );

Reference ServiceBase to your class and put the below code in the OnStartevent:

Constants.TimeIntervalValue = 1 (hour)..Ideally you should set this value in config file.

StartSendingMails = function name you want to run in the application.

 protected override void OnStart(string[] args)
        {
            // It tells in what interval the service will run each time.
            Int32 timeInterval = Int32.Parse(Constants.TimeIntervalValue) * 60 * 60 * 1000;
            base.OnStart(args);
            TimerCallback timerDelegate = new TimerCallback(StartSendingMails);
            serviceTimer = new Timer(timerDelegate, null, 0, Convert.ToInt32(timeInterval));
        }

Not really, there are a couple of tricks to limit memory, like on Windows you can use the Windows System Resource Manager (WSRM), but generally Mongo works best on a dedicated server when it's free to use memory without much contention with other systems.

Although the operating system will try to allocate memory to other processes as they need it, in practice this can lead to performance issues if other systems have high memory requirements too.

If you really need to limit memory, and only have a single server, then your best bet is virtualization.

Add produces = "application/json" in @RequestMapping

AES is the currently accepted standard algorithm to use (hence the name Advanced Encryption Standard).

The rest are not.

Use an AppDomain

It is safer and more flexible to load the assembly into its own AppDomain first.

So instead of the answer given previously:

var asm = Assembly.LoadFile(@"C:\myDll.dll");
var type = asm.GetType("TestRunner");
var runnable = Activator.CreateInstance(type) as IRunnable;
if (runnable == null) throw new Exception("broke");
runnable.Run();

I would suggest the following (adapted from this answer to a related question):

var domain = AppDomain.CreateDomain("NewDomainName");
var t = typeof(TypeIWantToLoad);
var runnable = domain.CreateInstanceFromAndUnwrap(@"C:\myDll.dll", t.Name) as IRunnable;
if (runnable == null) throw new Exception("broke");
runnable.Run();

Now you can unload the assembly and have different security settings.

If you want even more flexibility and power for dynamic loading and unloading of assemblies, you should look at the Managed Add-ins Framework (i.e. the System.AddIn namespace). For more information, see this article on Add-ins and Extensibility on MSDN.

Use tags label and our method for =, is bound to input. If follow the rules of the form, and avoid confusion with tags, use the following:

<style type="text/css">
    label.lab:before { content: 'input: '; }
</style>

or compare (short code):

<style type="text/css">
    div label { content: 'input: '; color: red; }
</style>

form....

<label class="lab" for="single"></label><input name="n" id="single" ...><label for="single"> - simle</label>

or compare (short code):

<div><label></label><input name="n" ...></div>

If you want to manage key misses you should use TryGetValue

https://msdn.microsoft.com/en-gb/library/bb347013(v=vs.110).aspx

string value = "";
if (openWith.TryGetValue("tif", out value))
{
    Console.WriteLine("For key = \"tif\", value = {0}.", value);
}
else
{
    Console.WriteLine("Key = \"tif\" is not found.");
}

the next code can be used in 2 modes, mode 1 save the html code to a image, mode 2 save the html code to a canvas.

this code work with the library: https://github.com/tsayen/dom-to-image

*the "id_div" is the id of the element html that you want to transform.

**the "canvas_out" is the id of the div that will contain the canvas so try this code. :

   function Guardardiv(id_div){

      var mode = 2 // default 1 (save to image), mode 2 = save to canvas
      console.log("Process start");
      var node = document.getElementById(id_div);
      // get the div that will contain the canvas
      var canvas_out = document.getElementById('canvas_out');
      var canvas = document.createElement('canvas');
      canvas.width = node.scrollWidth;
      canvas.height = node.scrollHeight;

      domtoimage.toPng(node).then(function (pngDataUrl) {
          var img = new Image();
          img.onload = function () {
          var context = canvas.getContext('2d');
          context.drawImage(img, 0, 0);
        };

        if (mode == 1){ // save to image
             downloadURI(pngDataUrl, "salida.png");
        }else if (mode == 2){ // save to canvas
          img.src = pngDataUrl;
          canvas_out.appendChild(img);

        }
      console.log("Process finish");
    });

    }

so, if you want to save to image just add this function:

    function downloadURI(uri, name) {
        var link = document.createElement("a");

        link.download = name;
        link.href = uri;
        document.body.appendChild(link);
        link.click();   
    }

Example of use:

 <html>
 <head>
 </script src="/dom-to-image.js"></script>
 </head> 
 <body>
 <div id="container">
   All content that want to transform
  </div>
  <button onclick="Guardardiv('container');">Convert<button> 

 <!-- if use mode 2 -->
 <div id="canvas_out"></div>
 </html>

Comment if that work. Comenten si les sirvio :)

To change width you can use css

For fixed size wanted

.popover{
    width:200px;
    height:250px;    
}

For max width wanted:

.popover{
    max-width:200px;
    height:250px;    
}

jsfiddle: http://jsfiddle.net/Rqx8T/2/

You actually don't need jQuery, just CSS. For example, here's some HTML:

<div class="special"></div>

And here's the CSS:

.special
{
    cursor: pointer;
}

Here is a solution that:

1. Drops constraints (thanks to this post)
2. Iterates through INFORMATION_SCHEMA.TABLES for a particular database
3. SELECTS tables based on some search criteria
4. Deletes all the data from those tables
5. Re-adds constraints
6. Allows for ignoring of certain tables such as sysdiagrams and __RefactorLog

I initially tried EXECUTE sp_MSforeachtable 'TRUNCATE TABLE ?', but that deleted my diagrams.

USE <DB name>;
GO

-- Disable all constraints in the database
EXEC sp_msforeachtable "ALTER TABLE ? NOCHECK CONSTRAINT all"

declare @catalog nvarchar(250);
declare @schema nvarchar(250);
declare @tbl nvarchar(250);
DECLARE i CURSOR LOCAL FAST_FORWARD FOR select
                                        TABLE_CATALOG,
                                        TABLE_SCHEMA,
                                        TABLE_NAME
                                        from INFORMATION_SCHEMA.TABLES
                                        where
                                        TABLE_TYPE = 'BASE TABLE'
                                        AND TABLE_NAME != 'sysdiagrams'
                                        AND TABLE_NAME != '__RefactorLog'

OPEN i;
FETCH NEXT FROM i INTO @catalog, @schema, @tbl;
WHILE @@FETCH_STATUS = 0
    BEGIN
        DECLARE @sql NVARCHAR(MAX) = N'DELETE FROM [' + @catalog + '].[' + @schema + '].[' + @tbl + '];'
        /* Make sure these are the commands you want to execute before executing */
        PRINT 'Executing statement: ' + @sql
        -- EXECUTE sp_executesql @sql
        FETCH NEXT FROM i INTO @catalog, @schema, @tbl;
    END
CLOSE i;
DEALLOCATE i;

-- Re-enable all constraints again
EXEC sp_msforeachtable "ALTER TABLE ? WITH CHECK CHECK CONSTRAINT all"

You can use dd to extract arbitrary chunks of bytes.

For example,

dd skip=1234 count=5 bs=1

would copy bytes 1235 to 1239 from its input to its output, and discard the rest.

To just get the first five bytes from standard input, do:

dd count=5 bs=1

Note that, if you want to specify the input file name, dd has old-fashioned argument parsing, so you would do:

dd count=5 bs=1 if=filename

Note also that dd verbosely announces what it did, so to toss that away, do:

dd count=5 bs=1 2>&-

or

dd count=5 bs=1 2>/dev/null

Same solution as @Al3x for Windows x64, in cmd.exe:

cd %programfiles%\Oracle\VirtualBox

VBoxManage internalcommands sethduuid "full/path/to/.vdi"

This randomizes the UUID of the disk. Pro tip: Right click the .vdi file while holding shift and select "Copy as path" to obtain "full/path/to/.vdi" and enable quick edit in cmd.exe, then right click to paste.

Suppose your application named MyApp contains the following components.

• MyActivity1
• MyActivity2
• MyActivity3
• MyService

In order to filter the logging output from your application MyApp using logcat you would type the following.

adb logcat MyActivity1:v MyActivity2:v MyActivity3:v MyService:v *:s

However this requires you to know the TAG names for all of the components in your application rather than filtering using the application name MyApp. See logcat for specifics.

One solution to allow filtering at the application level would be to add a prefix to each of your unique TAG's.

• MyAppActivity1
• MyAppActivity2
• MyAppActivity3
• MyAppService

Now a wild card filter on the logcat output can be performed using the TAG prefix.

adb logcat | grep MyApp

The result will be the output from the entire application.

export NODE_ENV=production is bad solution, it disappears after restart.

if you want not to worry about that variable anymore - add it to this file:

/etc/environment

don't use export syntax, just write (in new line if some content is already there):

NODE_ENV=production

it works after restart. You will not have to re-enter export NODE_ENV=production command anymore anywhere and just use node with anything you'd like - forever, pm2...

For heroku:

heroku config:set NODE_ENV="production"

which is actually default.

egrep -o '^[^:]*:'

Swift 3:

You can use Swifts built in functionality to find custom objects in an Array.

First you must make sure your custom object conforms to the: Equatable protocol.

class Person : Equatable { //<--- Add Equatable protocol
    let name: String
    var age: Int

    init(name: String, age: Int) {
        self.name = name
        self.age = age
    }

    //Add Equatable functionality:
    static func == (lhs: Person, rhs: Person) -> Bool {
        return (lhs.name == rhs.name)
    }
}

With Equatable functionality added to your object , Swift will now show you additional properties you can use on an array:

//create new array and populate with objects:
let p1 = Person(name: "Paul", age: 20)
let p2 = Person(name: "Mike", age: 22)
let p3 = Person(name: "Jane", age: 33)
var people = [Person]([p1,p2,p3])

//find index by object:
let index = people.index(of: p2)! //finds Index of Mike

//remove item by index:
people.remove(at: index) //removes Mike from array

If you want using it with parameter (ie. delete all subdirs under the given directory), then put this two lines into a *.bat or *.cmd file:

@echo off
for /f "delims=" %%d in ('dir %1 /s /b /ad ^| sort /r') do rd "%%d" 2>nul && echo rmdir %%d

and add script-path to your PATH environment variable. In this case you can call your batch file from any location (I suppose UNC path should work, too).

Eg.:

YourBatchFileName c:\temp

(you may use quotation marks if needed)

will remove all empty subdirs under c:\temp folder

YourBatchFileName

will remove all empty subdirs under the current directory.

Parenthesis () are used to enable grouping of regex phrases.

The group(1) contains the string that is between parenthesis (.*) so .* in this case

And group(0) contains whole matched string.

If you would have more groups (read (...) ) it would be put into groups with next indexes (2, 3 and so on).

There are a number of reasons why you might not see logs, most of which are listed below. Here are some steps to check most reasons:

1. Make sure you don't have 'android:debuggable="false"' in your AndroidManifest.xml
2. Make sure your logcat isn't paused and make sure you are scrolled to the bottom
3. Your filters should either be 'no filters' or your current app
4. You have the correct device selected in your logcat devices list
5. If you're not getting any messages, try restarting adb. You can do that from Android Studio by clicking on the 'restart' icon, it's right after the print icon for logcat and it looks like a green curved arrow coming out of a box. If you don't see it, mouse over the '>>' that continues the icon menu when the logcat is too small.

For Windows do the following:

1. Note down the font name and font size from the "Edit-Select Font..." menu of "gvim.exec".
2. Then do :e $MYGVIMRC
3. Search for "guifont" string and change it to set guifont=<font name as noted>:h<font size>
4. Save the file and quit.
5. Next time when you execute gvim.exec, you will see the effect.

Update

While my original answer below is still valid and might be helpful to understand the cause for DNS based URL forwarding not being available via Amazon Route 53 out of the box, I highly recommend checking out Vivek M. Chawla's utterly smart indirect solution via the meanwhile introduced Amazon S3 Support for Website Redirects and achieving a self contained server less and thus free solution within AWS only like so.

• Implementing an automated solution to generate such redirects is left as an exercise for the reader, but please pay tribute to Vivek's epic answer by publishing your solution ;)

Original Answer

Nettica must be running a custom redirection solution for this, here is the problem:

You could create a CNAME alias like aws.example.com for myaccount.signin.aws.amazon.com, however, DNS provides no official support for aliasing a subdirectory like console in this example.

• It's a pity that AWS doesn't appear to simply do this by default when hitting https://myaccount.signin.aws.amazon.com/ (I just tried), because it would solve you problem right away and make a lot of sense in the first place; besides, it should be pretty easy to configure on their end.

For that reason a few DNS providers have apparently implemented a custom solution to allow redirects to subdirectories; I venture the guess that they are basically facilitating a CNAME alias for a domain of their own and are redirecting again from there to the final destination via an immediate HTTP 3xx Redirection.

So to achieve the same result, you'd need to have a HTTP service running performing these redirects, which is not the simple solution one would hope for of course. Maybe/Hopefully someone can come up with a smarter approach still though.

Scripts based on processing the list of installed plugins may not work as there are dependencies between installed plugins (e,g, cordova-plugin-file and cordova-plugin-file-transfer).

In the example, the script will find the file plugin first, then it will try to remove it and we'll get an error as file-transfer requires it. Therefore, we shall have

Try this -

 select * from table where id in (3,4) or [name] in ('andy','paul');

<IF id='if-1'>
    <CONDITION>
        <TIME from="5pm" to="9pm" />
    </CONDITION>
    <THEN>
        <...some actions defined.../>
    </THEN>
    <ELSE>
        <...other set of actions defined here.../>
    </ELSE>
</IF>

Seems easier to read to me. There's more nesting, but if anything that helps with the readability?

have you checked RSE (Remote System Explorer) ? I think it's pretty close to what you want to achieve.

a blog post about it, with screenshots

I believe sideshowbarker 's answer here has all the info you need to fix this. If your problem is just No 'Access-Control-Allow-Origin' header is present on the response you're getting, you can set up a CORS proxy to get around this. Way more info on it in the linked answer

Have you tried calling knockout's clean node method on your DOM element to dispose of the in memory bound objects?

var element = $('#elementId')[0]; 
ko.cleanNode(element);

Then applying the knockout bindings again on just that element with your new view models would update your view binding.

export a=$(script.sh)

Hope this helps. Note there are no spaces between variable and =. To echo the output

echo $a

Expanding on @gecco 's answer, the following is an example that'll show you the difference:

def foo(**kwargs):
    for entry in kwargs.items():
        print("Key: {}, value: {}".format(entry[0], entry[1]))

# call using normal keys:
foo(a=1, b=2, c=3)
# call using an unpacked dictionary:
foo(**{"a": 1, "b":2, "c":3})

# call using a dictionary fails because the function will think you are
# giving it a positional argument
foo({"a": 1, "b": 2, "c": 3})
# this yields the same error as any other positional argument
foo(3)
foo("string")

Here you can see how unpacking a dictionary works, and why sending an actual dictionary fails

try out this....

JSFIDDEL DEMO

using javascript

?document.getElementById('sel').value = 'car';??????????

using jQuery

$('#sel').val('car');

It is actually a 3 step process to connect to a PostgreSQL server remotely through pgAdmin3.

Note: I use Ubuntu 11.04 and PostgreSQL 8.4.

1. You have to make PostgreSQL listening for remote incoming TCP connections because the default settings allow to listen only for connections on the loopback interface. To be able to reach the server remotely you have to add the following line into the file /etc/postgresql/8.4/main/postgresql.conf:

   listen_addresses = '*'

2. PostgreSQL by default refuses all connections it receives from any remote address, you have to relax these rules by adding this line to /etc/postgresql/8.4/main/pg_hba.conf:

   host all all 0.0.0.0/0 md5

   This is an access control rule that let anybody login in from any address if he can provide a valid password (the md5 keyword). You can use needed network/mask instead of 0.0.0.0/0 .

3. When you have applied these modifications to your configuration files you need to restart PostgreSQL server. Now it is possible to login to your server remotely, using the username and password.

At least on Oracle they are all the same: http://www.oracledba.co.uk/tips/count_speed.htm

<?php
    require_once '../config/config.php';
    require_once '../classes/class.College.php';
    $Response = array();
    $Parms = $_POST;
    $Parms['Id'] = Id;  

        $Parms['function'] = 'DeleteCollege';
        switch ($Parms['function']) {
        case 'InsertCollege': {
            $Response = College::InsertCollege($Parms);
            break;
        }
        case 'GetCollegeById': {
            $Response = College::GetCollegeById($Parms['Id']);
            break;
        }
        case 'GetAllCollege': {
            $Response = College::GetAllCollege();
            break;
        }
        case 'UpdateCollege': {
            $Response = College::UpdateCollege($Parms);
            break;
        }
        case 'DeleteCollege': {
            College::DeleteCollege($Parms['Id']);
            $Response = array('status' => 'R');
            break;
        }
    }
    echo json_encode($Response);
?>

Bit late however I use

curl -4 icanhazip.com 

returns the server Primary IP address.

Python

As @numeral correctly said, column._jc.toString() works fine in case of unaliased columns.

In case of aliased columns (i.e. column.alias("whatever") ) the alias can be extracted, even without the usage of regular expressions: str(column).split(" AS ")[1].split("`")[1] .

I don't know Scala syntax, but I'm sure It can be done the same.

UPDATE: Ruby 1.9.3 Kernel#rand also accepts ranges

rand(a..b)

http://www.rubyinside.com/ruby-1-9-3-introduction-and-changes-5428.html

Converting to array may be too expensive, and it's unnecessary.

(a..b).to_a.sample

Or

[*a..b].sample

Array#sample

Standard in Ruby 1.8.7+.
Note: was named #choice in 1.8.7 and renamed in later versions.

But anyway, generating array need resources, and solution you already wrote is the best, you can do.

string Output = Regex.Replace(Input, @"([ a-zA-Z0-9&, _]|^\s)", "");

Here all the special characters except space, comma, and ampersand are replaced. You can also omit space, comma and ampersand by the following regular expression.

string Output = Regex.Replace(Input, @"([ a-zA-Z0-9_]|^\s)", "");

Where Input is the string which we need to replace the characters.

Where you have: <input type="radio" name="enddate" value="1" />

After value= "1" you can also just add unchecked =" false" />

The line will then be:

<input type="radio" name="enddate" value="1" unchecked =" false" />

I think the easiest way to match the characters like

\^$.?*|+()[

are using character classes from within R. Consider the following to clean column headers from a data file, which could contain spaces, and punctuation characters:

> library(stringr)
> colnames(order_table) <- str_replace_all(colnames(order_table),"[:punct:]|[:space:]","")

This approach allows us to string character classes to match punctation characters, in addition to whitespace characters, something you would normally have to escape with \\ to detect. You can learn more about the character classes at this cheatsheet below, and you can also type in ?regexp to see more info about this.

https://www.rstudio.com/wp-content/uploads/2016/09/RegExCheatsheet.pdf

Same error here, this worked for me:

sudo mongod --repair

followed by

sudo mongod

(forget about service and start)

Then on a different tab/terminal:

mongo

'vb.net
'Extended file stributes
'visual basic .net sample 

Dim sFile As Object
        Dim oShell = CreateObject("Shell.Application")
        Dim oDir = oShell.Namespace("c:\temp")

        For i = 0 To 34
            TextBox1.Text = TextBox1.Text & oDir.GetDetailsOf(oDir, i) & vbCrLf
            For Each sFile In oDir.Items
                TextBox1.Text = TextBox1.Text & oDir.GetDetailsOf(sFile, i) & vbCrLf
            Next
            TextBox1.Text = TextBox1.Text & vbCrLf
        Next

In Angular 7/8/9

Source Link

Using Bootstrap Form

<form>
    <div class="form-group">
        <fieldset class="form-group">

            <label>Upload Logo</label>
            {{imageError}}
            <div class="custom-file fileInputProfileWrap">
                <input type="file" (change)="fileChangeEvent($event)" class="fileInputProfile">
                <div class="img-space">

                    <ng-container *ngIf="isImageSaved; else elseTemplate">
                        <img [src]="cardImageBase64" />
                    </ng-container>
                    <ng-template #elseTemplate>

                        <img src="./../../assets/placeholder.png" class="img-responsive">
                    </ng-template>

                </div>

            </div>
        </fieldset>
    </div>
    <a class="btn btn-danger" (click)="removeImage()" *ngIf="isImageSaved">Remove</a>
</form>

In Component Class

fileChangeEvent(fileInput: any) {
    this.imageError = null;
    if (fileInput.target.files && fileInput.target.files[0]) {
        // Size Filter Bytes
        const max_size = 20971520;
        const allowed_types = ['image/png', 'image/jpeg'];
        const max_height = 15200;
        const max_width = 25600;

        if (fileInput.target.files[0].size > max_size) {
            this.imageError =
                'Maximum size allowed is ' + max_size / 1000 + 'Mb';

            return false;
        }

        if (!_.includes(allowed_types, fileInput.target.files[0].type)) {
            this.imageError = 'Only Images are allowed ( JPG | PNG )';
            return false;
        }
        const reader = new FileReader();
        reader.onload = (e: any) => {
            const image = new Image();
            image.src = e.target.result;
            image.onload = rs => {
                const img_height = rs.currentTarget['height'];
                const img_width = rs.currentTarget['width'];

                console.log(img_height, img_width);


                if (img_height > max_height && img_width > max_width) {
                    this.imageError =
                        'Maximum dimentions allowed ' +
                        max_height +
                        '*' +
                        max_width +
                        'px';
                    return false;
                } else {
                    const imgBase64Path = e.target.result;
                    this.cardImageBase64 = imgBase64Path;
                    this.isImageSaved = true;
                    // this.previewImagePath = imgBase64Path;
                }
            };
        };

        reader.readAsDataURL(fileInput.target.files[0]);
    }
}

removeImage() {
    this.cardImageBase64 = null;
    this.isImageSaved = false;
}

I would suggest using closest, which selects the closest matching parent element:

$('input[name="submitButton"]').closest("form");

Instead of filtering by the name, I would do this:

$('input[type=submit]').closest("form");

Git tags are just pointers to the commit. So you use them the same way as you do HEAD, branch names or commit sha hashes. You can use tags with any git command that accepts commit/revision arguments. You can try it with git rev-parse tagname to display the commit it points to.

In your case you have at least these two alternatives:

1. Reset the current branch to specific tag:

   git reset --hard tagname
   

2. Generate revert commit on top to get you to the state of the tag:

   git revert tag
   

This might introduce some conflicts if you have merge commits though.

Use setValue method of Range class to set the value of particular cell.

function storeValue() {
  var ss = SpreadsheetApp.getActiveSpreadsheet();
  // ss is now the spreadsheet the script is associated with
  var sheet = ss.getSheets()[0]; // sheets are counted starting from 0
  // sheet is the first worksheet in the spreadsheet
  var cell = sheet.getRange("B2"); 
  cell.setValue(100);
}

You can also select a cell using row and column numbers.

var cell = sheet.getRange(2, 3); // here cell is C2

It's also possible to set value of multiple cells at once.

var values = [
  ["2.000", "1,000,000", "$2.99"]
];

var range = sheet.getRange("B2:D2");
range.setValues(values);

Catalina Update / Desktop Permissions

I come across this once a year on macOS. I usually use apache2 for hosting a folder on my desktop.

If you are trying to give access to the desktop folder you need to follow this to allow httpd to have access to all folders: https://apple.stackexchange.com/a/373139/353465

By using the array initializer list syntax, ie:

String myArray[] = { "one", "two", "three" };

The simple answer (swift 3):

Calendar.current.component(.weekday, from: Date())

This should fix your problem:

docker-compose ps # lists all services (id, name)
docker-compose stop <id/name> #this will stop only the selected container
docker-compose rm <id/name> # this will remove the docker container permanently 
docker-compose up # builds/rebuilds all not already built container 

You close the second Scanner which closes the underlying InputStream, therefore the first Scanner can no longer read from the same InputStream and a NoSuchElementException results.

The solution: For console apps, use a single Scanner to read from System.in.

Aside: As stated already, be aware that Scanner#nextInt does not consume newline characters. Ensure that these are consumed before attempting to call nextLine again by using Scanner#newLine().

See: Do not create multiple buffered wrappers on a single InputStream

find supports wildcard matches, just add a *:

find / -type d -name "ora10*"

I had the same problem. I found that this is because the Maven script looks at the CurrentJDK link below and finds a 1.6 JDK. Even if you install the latest JDK this is not resolved. While you could just set JAVA_HOME in your $HOME/.bash_profile script I chose to fix the symbolic link instead as follows:

ls -l /System/Library/Frameworks/JavaVM.framework/Versions/
total 64
lrwxr-xr-x  1 root  wheel   10 30 Oct 16:18 1.4 -> CurrentJDK
lrwxr-xr-x  1 root  wheel   10 30 Oct 16:18 1.4.2 -> CurrentJDK
lrwxr-xr-x  1 root  wheel   10 30 Oct 16:18 1.5 -> CurrentJDK
lrwxr-xr-x  1 root  wheel   10 30 Oct 16:18 1.5.0 -> CurrentJDK
lrwxr-xr-x  1 root  wheel   10 30 Oct 16:18 1.6 -> CurrentJDK
lrwxr-xr-x  1 root  wheel   10 30 Oct 16:18 1.6.0 -> CurrentJDK
drwxr-xr-x  9 root  wheel  306 11 Nov 21:20 A
lrwxr-xr-x  1 root  wheel    1 30 Oct 16:18 Current -> A
lrwxr-xr-x  1 root  wheel   59 30 Oct 16:18 CurrentJDK -> /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents

Notice that CurrentJDK points at 1.6.0.jdk

To fix it I ran the following commands (you should check your installed version and adapt accordingly).

sudo rm /System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK
sudo ln -s /Library/Java/JavaVirtualMachines/jdk1.7.0_51.jdk/Contents/ /System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK

Try this (subquery):

SELECT * FROM terms WHERE id IN 
   (SELECT term_id FROM terms_relation WHERE taxonomy = "categ")

Or you can try this (JOIN):

SELECT t.* FROM terms AS t 
   INNER JOIN terms_relation AS tr 
   ON t.id = tr.term_id AND tr.taxonomy = "categ"

If you want to receive all fields from two tables:

SELECT t.id, t.name, t.slug, tr.description, tr.created_at, tr.updated_at 
  FROM terms AS t 
   INNER JOIN terms_relation AS tr 
   ON t.id = tr.term_id AND tr.taxonomy = "categ"

Since C# version 6 you can simply call:

string currentMethodName = nameof(MyMethod);

In C# version 5 and .NET 4.5 you can use the [CallerMemberName] attribute to have the compiler auto-generate the name of the calling method in a string argument. Other useful attributes are [CallerFilePath] to have the compiler generate the source code file path and [CallerLineNumber] to get the line number in the source code file for the statement that made the call.

Before that there were still some more convoluted ways of getting the method name, but much simpler:

void MyMethod() {
  string currentMethodName = "MyMethod";
  //etc...
}

Albeit that a refactoring probably won't fix it automatically.

If you completely don't care about the (considerable) cost of using Reflection then this helper method should be useful:

using System.Diagnostics;
using System.Runtime.CompilerServices;
using System.Reflection;
//...

[MethodImpl(MethodImplOptions.NoInlining)]
public static string GetMyMethodName() {
  var st = new StackTrace(new StackFrame(1));
  return st.GetFrame(0).GetMethod().Name;
} 

Generate a migration and use change_column_default, is succinct and reversible:

class SetDefaultAgeInPeople < ActiveRecord::Migration[5.2]
  def change
    change_column_default :people, :age, { from: nil, to: 0 }
  end
end

DataView view = new DataView();
view.Table = DataSet1.Tables["Suppliers"];
view.RowFilter = "City = 'Berlin'";
view.RowStateFilter = DataViewRowState.ModifiedCurrent;
view.Sort = "CompanyName DESC";

// Simple-bind to a TextBox control
Text1.DataBindings.Add("Text", view, "CompanyName");

Ref: http://www.csharp-examples.net/dataview-rowfilter/

http://msdn.microsoft.com/en-us/library/system.data.dataview.rowfilter.aspx

None of the above mentioned solution worked. The one that seemed to work only provide the functionality for just one cell

Recently I had to enter a lot of names and without suggestions, it was a huge pain. I was fortunate enough to have this excel autocomplete add-in to enable the autocompletion. The down side is that you need to enable macro (but you can always turn it off later)

Indeed this relies on the programmer's preferences. I personally use: numeric(15,4) to conform to the Generally Accepted Accounting Principles (GAAP).