Programs & Examples On #Flextable

For fellow googlers using Anaconda, install the ffmpeg package:

conda install -c conda-forge ffmpeg

This works on Windows too.

(Original answer used menpo package owner but as mentioned by @harsh their version is a little behind at time of writing)

With my Android 5 tablet, every time I attempt to use adb, to install a signed release apk, I get the [INSTALL_FAILED_ALREADY_EXISTS] error.

I have to uninstall the debug package first. But, I cannot uninstall using the device's Application Manager!

If do uninstall the debug version with the Application Manager, then I have to re-run the debug build variant from Android Studio, then uninstall it using adb uninstall com.example.mypackagename

Finally, I can use adb install myApp.apk to install the signed release apk.

Android Plugin for Gradle HTTP proxy settings

For application-specific HTTP proxy settings, set the proxy settings in the build.gradle file as required for each application module.

apply plugin: 'com.android.application'

android {
    ...

    defaultConfig {
        ...
        systemProp.http.proxyHost=proxy.company.com
        systemProp.http.proxyPort=443
        systemProp.http.proxyUser=userid
        systemProp.http.proxyPassword=password
        systemProp.http.auth.ntlm.domain=domain
    }
    ...
}

For project-wide HTTP proxy settings, set the proxy settings in the gradle/gradle.properties file.

# Project-wide Gradle settings.
...

systemProp.http.proxyHost=proxy.company.com
systemProp.http.proxyPort=443
systemProp.http.proxyUser=username
systemProp.http.proxyPassword=password
systemProp.http.auth.ntlm.domain=domain

systemProp.https.proxyHost=proxy.company.com
systemProp.https.proxyPort=443
systemProp.https.proxyUser=username
systemProp.https.proxyPassword=password
systemProp.https.auth.ntlm.domain=domain

...

Please read Official Document Configuration

Using replace and assigning a new df:

import pandas as pd
df = pd.DataFrame(['-',3,2,5,1,-5,-1,'-',9])
dfnew = df.replace('-', 0)
print(dfnew)


(venv) D:\assets>py teste2.py
   0
0  0
1  3
2  2
3  5
4  1
5 -5

The algorithm (HS256) used to sign the JWT means that the secret is a symmetric key that is known by both the sender and the receiver. It is negotiated and distributed out of band. Hence, if you're the intended recipient of the token, the sender should have provided you with the secret out of band.

If you're the sender, you can use an arbitrary string of bytes as the secret, it can be generated or purposely chosen. You have to make sure that you provide the secret to the intended recipient out of band.

For the record, the 3 elements in the JWT are not base64-encoded but base64url-encoded, which is a variant of base64 encoding that results in a URL-safe value.

In RxJS 5+ you can do it like this

import { Observable } from "rxjs/Observable";
import { of } from "rxjs/observable/of";
import { delay } from "rxjs/operators";

fakeObservable = of('dummy').pipe(delay(5000));

In RxJS 6+

import { of } from "rxjs";
import { delay } from "rxjs/operators";

fakeObservable = of('dummy').pipe(delay(5000));

If you want to delay each emitted value try

from([1, 2, 3]).pipe(concatMap(item => of(item).pipe(delay(1000))));

As no answer is complete for the current way to solve this problem, I try to give instructions for a complete solution. Please comment if something is missing or could be done better.

General information

First, there exist some libraries that want to solve the problem but they all seem outdated or are missing some features:

• https://github.com/delight-im/Android-Languages
  • Outdated (see issues)
  • When selecting a language in the UI, it always shows all languages (hardcoded in the library), not only those where translations exist
• https://github.com/akexorcist/Android-LocalizationActivity
  • Seems quite sophisticated and might use a similar approach as shown below

Further I think writing a library might not be a good/easy way to solve this problem because there is not very much to do, and what has to be done is rather changing existing code than using something completely decoupled. Therefore I composed the following instructions that should be complete.

My solution is mainly based on https://github.com/gunhansancar/ChangeLanguageExample (as already linked to by localhost). It is the best code I found to orientate at. Some remarks:

• As necessary, it provides different implementations to change locale for Android N (and above) and below
• It uses a method updateViews() in each Activity to manually update all strings after changing locale (using the usual getString(id)) which is not necessary in the approach shown below
• It only supports languages and not complete locales (which also include region (country) and variant codes)

I changed it a bit, decoupling the part which persists the chosen locale (as one might want to do that separately, as suggested below).

Solution

The solution consists of the following two steps:

• Permanently change the locale to be used by the app
• Make the app use the custom locale set, without restarting

Step 1: Change the locale

Use the class LocaleHelper, based on gunhansancar's LocaleHelper:

• Add a ListPreference in a PreferenceFragment with the available languages (has to be maintained when languages should be added later)

import android.annotation.TargetApi;
import android.content.Context;
import android.content.SharedPreferences;
import android.content.res.Configuration;
import android.content.res.Resources;
import android.os.Build;
import android.preference.PreferenceManager;

import java.util.Locale;

import mypackage.SettingsFragment;

/**
 * Manages setting of the app's locale.
 */
public class LocaleHelper {

    public static Context onAttach(Context context) {
        String locale = getPersistedLocale(context);
        return setLocale(context, locale);
    }

    public static String getPersistedLocale(Context context) {
        SharedPreferences preferences = PreferenceManager.getDefaultSharedPreferences(context);
        return preferences.getString(SettingsFragment.KEY_PREF_LANGUAGE, "");
    }

    /**
     * Set the app's locale to the one specified by the given String.
     *
     * @param context
     * @param localeSpec a locale specification as used for Android resources (NOTE: does not
     *                   support country and variant codes so far); the special string "system" sets
     *                   the locale to the locale specified in system settings
     * @return
     */
    public static Context setLocale(Context context, String localeSpec) {
        Locale locale;
        if (localeSpec.equals("system")) {
            if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.N) {
                locale = Resources.getSystem().getConfiguration().getLocales().get(0);
            } else {
                //noinspection deprecation
                locale = Resources.getSystem().getConfiguration().locale;
            }
        } else {
            locale = new Locale(localeSpec);
        }
        Locale.setDefault(locale);
        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.N) {
            return updateResources(context, locale);
        } else {
            return updateResourcesLegacy(context, locale);
        }
    }

    @TargetApi(Build.VERSION_CODES.N)
    private static Context updateResources(Context context, Locale locale) {
        Configuration configuration = context.getResources().getConfiguration();
        configuration.setLocale(locale);
        configuration.setLayoutDirection(locale);

        return context.createConfigurationContext(configuration);
    }

    @SuppressWarnings("deprecation")
    private static Context updateResourcesLegacy(Context context, Locale locale) {
        Resources resources = context.getResources();

        Configuration configuration = resources.getConfiguration();
        configuration.locale = locale;
        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.JELLY_BEAN_MR1) {
            configuration.setLayoutDirection(locale);
        }

        resources.updateConfiguration(configuration, resources.getDisplayMetrics());

        return context;
    }
}

Create a SettingsFragment like the following:

import android.content.SharedPreferences;
import android.os.Bundle;
import android.preference.PreferenceFragment;
import android.preference.PreferenceManager;
import android.view.LayoutInflater;
import android.view.View;
import android.view.ViewGroup;

import mypackage.LocaleHelper;
import mypackage.R;

/**
 * Fragment containing the app's main settings.
 */
public class SettingsFragment extends PreferenceFragment implements SharedPreferences.OnSharedPreferenceChangeListener {
    public static final String KEY_PREF_LANGUAGE = "pref_key_language";

    public SettingsFragment() {
        // Required empty public constructor
    }

    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        addPreferencesFromResource(R.xml.preferences);
    }

    @Override
    public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {
        View view = inflater.inflate(R.layout.fragment_settings, container, false);
        return view;
    }

    @Override
    public void onSharedPreferenceChanged(SharedPreferences sharedPreferences, String key) {
        switch (key) {
            case KEY_PREF_LANGUAGE:
                LocaleHelper.setLocale(getContext(), PreferenceManager.getDefaultSharedPreferences(getContext()).getString(key, ""));
                getActivity().recreate(); // necessary here because this Activity is currently running and thus a recreate() in onResume() would be too late
                break;
        }
    }

    @Override
    public void onResume() {
        super.onResume();
        // documentation requires that a reference to the listener is kept as long as it may be called, which is the case as it can only be called from this Fragment
        getPreferenceScreen().getSharedPreferences().registerOnSharedPreferenceChangeListener(this);
    }

    @Override
    public void onPause() {
        super.onPause();
        getPreferenceScreen().getSharedPreferences().unregisterOnSharedPreferenceChangeListener(this);
    }
}

Create a resource locales.xml listing all locales with available translations in the following way (list of locale codes):

<!-- Lists available locales used for setting the locale manually.
     For now only language codes (locale codes without country and variant) are supported.
     Has to be in sync with "settings_language_values" in strings.xml (the entries must correspond).
  -->
<resources>
    <string name="system_locale" translatable="false">system</string>
    <string name="default_locale" translatable="false"></string>
    <string-array name="locales">
        <item>@string/system_locale</item> <!-- system setting -->
        <item>@string/default_locale</item> <!-- default locale -->
        <item>de</item>
    </string-array>
</resources>

In your PreferenceScreen you can use the following section to let the user select the available languages:

<PreferenceScreen xmlns:android="http://schemas.android.com/apk/res/android">
    <PreferenceCategory
        android:title="@string/preferences_category_general">
        <ListPreference
            android:key="pref_key_language"
            android:title="@string/preferences_language"
            android:dialogTitle="@string/preferences_language"
            android:entries="@array/settings_language_values"
            android:entryValues="@array/locales"
            android:defaultValue="@string/system_locale"
            android:summary="%s">
        </ListPreference>
    </PreferenceCategory>
</PreferenceScreen>

which uses the following strings from strings.xml:

<string name="preferences_category_general">General</string>
<string name="preferences_language">Language</string>
<!-- NOTE: Has to correspond to array "locales" in locales.xml (elements in same orderwith) -->
<string-array name="settings_language_values">
    <item>Default (System setting)</item>
    <item>English</item>
    <item>German</item>
</string-array>

Step 2: Make the app use the custom locale

Now setup each Activity to use the custom locale set. The easiest way to accomplish this is to have a common base class for all activities with the following code (where the important code is in attachBaseContext(Context base) and onResume()):

import android.content.Context;
import android.content.Intent;
import android.content.pm.PackageInfo;
import android.content.pm.PackageManager;
import android.os.Bundle;
import android.support.annotation.Nullable;
import android.support.v7.app.AppCompatActivity;
import android.view.Menu;
import android.view.MenuInflater;
import android.view.MenuItem;

import mypackage.LocaleHelper;
import mypackage.R;

/**
 * {@link AppCompatActivity} with main menu in the action bar. Automatically recreates
 * the activity when the locale has changed.
 */
public class MenuAppCompatActivity extends AppCompatActivity {
    private String initialLocale;

    @Override
    protected void onCreate(@Nullable Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        initialLocale = LocaleHelper.getPersistedLocale(this);
    }

    @Override
    public boolean onCreateOptionsMenu(Menu menu) {
        MenuInflater inflater = getMenuInflater();
        inflater.inflate(R.menu.menu, menu);
        return true;
    }

    @Override
    public boolean onOptionsItemSelected(MenuItem item) {
        switch (item.getItemId()) {
            case R.id.menu_settings:
                Intent intent = new Intent(this, SettingsActivity.class);
                startActivity(intent);
                return true;
            default:
                return super.onOptionsItemSelected(item);
        }
    }

    @Override
    protected void attachBaseContext(Context base) {
        super.attachBaseContext(LocaleHelper.onAttach(base));
    }

    @Override
    protected void onResume() {
        super.onResume();
        if (initialLocale != null && !initialLocale.equals(LocaleHelper.getPersistedLocale(this))) {
            recreate();
        }
    }
}

What it does is

• Override attachBaseContext(Context base) to use the locale previously persisted with LocaleHelper
• Detect a change of the locale and recreate the Activity to update its strings

Notes on this solution

• Recreating an Activity does not update the title of the ActionBar (as already observed here: https://github.com/gunhansancar/ChangeLanguageExample/issues/1).

  • This can be achieved by simply having a setTitle(R.string.mytitle) in the onCreate() method of each activity.

• It lets the user chose the system default locale, as well as the default locale of the app (which can be named, in this case "English").

• Only language codes, no region (country) and variant codes (like fr-rCA) are supported so far. To support full locale specifications, a parser similar to that in the Android-Languages library can be used (which supports region but no variant codes).

  • If someone finds or has written a good parser, add a comment so I can include it in the solution.

This is a DevExpress specific answer based on the top-voted answer by Gregor S. (currently it has 128 votes).

This means we can keep the styling consistent across the entire application:

Unfortunately, the original answer doesn't work with a ComboBoxEdit from DevExpress without some modifications.

First, the XAML for the ComboBoxEdit:

<dxe:ComboBoxEdit ItemsSource="{Binding Source={xamlExtensions:XamlExtensionEnumDropdown {x:myEnum:EnumFilter}}}"
    SelectedItem="{Binding BrokerOrderBookingFilterSelected, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"
    DisplayMember="Description"
    MinWidth="144" Margin="5" 
    HorizontalAlignment="Left"
    IsTextEditable="False"
    ValidateOnTextInput="False"
    AutoComplete="False"
    IncrementalFiltering="True"
    FilterCondition="Like"
    ImmediatePopup="True"/>

Needsless to say, you will need to point xamlExtensions at the namespace that contains the XAML extension class (which is defined below):

xmlns:xamlExtensions="clr-namespace:XamlExtensions"

And we have to point myEnum at the namespace that contains the enum:

xmlns:myEnum="clr-namespace:MyNamespace"

Then, the enum:

namespace MyNamespace
{
    public enum EnumFilter
    {
        [Description("Free as a bird")]
        Free = 0,

        [Description("I'm Somewhat Busy")]
        SomewhatBusy = 1,

        [Description("I'm Really Busy")]
        ReallyBusy = 2
    }
}

The problem in with the XAML is that we can't use SelectedItemValue, as this throws an error as the setter is unaccessable (bit of an oversight on your part, DevExpress). So we have to modify our ViewModel to obtain the value directly from the object:

private EnumFilter _filterSelected = EnumFilter.All;
public object FilterSelected
{
    get
    {
        return (EnumFilter)_filterSelected;
    }
    set
    {
        var x = (XamlExtensionEnumDropdown.EnumerationMember)value;
        if (x != null)
        {
            _filterSelected = (EnumFilter)x.Value;
        }
        OnPropertyChanged("FilterSelected");
    }
}

For completeness, here is the XAML extension from the original answer (slightly renamed):

namespace XamlExtensions
{
    /// <summary>
    ///     Intent: XAML markup extension to add support for enums into any dropdown box, see http://bit.ly/1g70oJy. We can name the items in the
    ///     dropdown box by using the [Description] attribute on the enum values.
    /// </summary>
    public class XamlExtensionEnumDropdown : MarkupExtension
    {
        private Type _enumType;


        public XamlExtensionEnumDropdown(Type enumType)
        {
            if (enumType == null)
            {
                throw new ArgumentNullException("enumType");
            }

            EnumType = enumType;
        }

        public Type EnumType
        {
            get { return _enumType; }
            private set
            {
                if (_enumType == value)
                {
                    return;
                }

                var enumType = Nullable.GetUnderlyingType(value) ?? value;

                if (enumType.IsEnum == false)
                {
                    throw new ArgumentException("Type must be an Enum.");
                }

                _enumType = value;
            }
        }

        public override object ProvideValue(IServiceProvider serviceProvider)
        {
            var enumValues = Enum.GetValues(EnumType);

            return (
                from object enumValue in enumValues
                select new EnumerationMember
                       {
                           Value = enumValue,
                           Description = GetDescription(enumValue)
                       }).ToArray();
        }

        private string GetDescription(object enumValue)
        {
            var descriptionAttribute = EnumType
                .GetField(enumValue.ToString())
                .GetCustomAttributes(typeof (DescriptionAttribute), false)
                .FirstOrDefault() as DescriptionAttribute;


            return descriptionAttribute != null
                ? descriptionAttribute.Description
                : enumValue.ToString();
        }

        #region Nested type: EnumerationMember
        public class EnumerationMember
        {
            public string Description { get; set; }
            public object Value { get; set; }
        }
        #endregion
    }
}

Disclaimer: I have no affiliation with DevExpress. Telerik is also a great library.

To complement the Perl one-liner, here's its awk equivalent:

awk 'NR==FNR{arr[$0];next} $0 in arr' file1 file2

This will read all lines from file1 into the array arr[], and then check for each line in file2 if it already exists within the array (i.e. file1). The lines that are found will be printed in the order in which they appear in file2. Note that the comparison in arr uses the entire line from file2 as index to the array, so it will only report exact matches on entire lines.

Building on the Python 2 solution from @GarethLatty, the following is a way to get a single line equivalent without intermediate variables in Python 2.

t=iter([1, 1, 2, 3, 5, 8, 13, 21, 34, 55]);h,t = [(h,list(t)) for h in t][0]

If you need it to be exception-proof (i.e. supporting empty list), then add:

t=iter([]);h,t = ([(h,list(t)) for h in t]+[(None,[])])[0]

If you want to do it without the semicolon, use:

h,t = ([(h,list(t)) for t in [iter([1,2,3,4])] for h in t]+[(None,[])])[0]

Try this query.. It uses the Analytic function SUM:

SELECT * FROM
(  
 SELECT SUM(1) OVER(PARTITION BY ctn_no) cnt, A.*
 FROM table1 a 
 WHERE s_ind ='Y'   
)
WHERE cnt > 2

Am not sure why you are identifying a record as a duplicate if the ctn_no repeats more than 2 times. FOr me it repeats more than once it is a duplicate. In this case change the las part of the query to WHERE cnt > 1

PROPS

A React component should use props to store information that can be changed, but can only be changed by a different component.

STATE

A React component should use state to store information that the component itself can change.

A good example is already provided by Valéry.

An alternative to jcoby's proposal would be:

class NilClass
  def nil_or_empty?
    true
  end
end

class String
  def nil_or_empty?
    empty?
  end
end

If you are sending alphanumeric data try changing

'Content-Type': 'multipart/form-data'

to

'Content-Type': 'application/x-www-form-urlencoded'

If you are sending non-alphanumeric data try to remove 'Content-Type' at all.

If it still does not work, consider trying request-promise (at least to test whether it is really axios problem or not)

Muppy is (yet another) Memory Usage Profiler for Python. The focus of this toolset is laid on the identification of memory leaks.

Muppy tries to help developers to identity memory leaks of Python applications. It enables the tracking of memory usage during runtime and the identification of objects which are leaking. Additionally, tools are provided which allow to locate the source of not released objects.

The java.net.URL class is in fact not at all a good way of validating URLs. MalformedURLException is not thrown on all malformed URLs during construction. Catching IOException on java.net.URL#openConnection().connect() does not validate URL either, only tell wether or not the connection can be established.

Consider this piece of code:

    try {
        new URL("http://.com");
        new URL("http://com.");
        new URL("http:// ");
        new URL("ftp://::::@example.com");
    } catch (MalformedURLException malformedURLException) {
        malformedURLException.printStackTrace();
    }

..which does not throw any exceptions.

I recommend using some validation API implemented using a context free grammar, or in very simplified validation just use regular expressions. However I need someone to suggest a superior or standard API for this, I only recently started searching for it myself.

Note It has been suggested that URL#toURI() in combination with handling of the exception java.net. URISyntaxException can facilitate validation of URLs. However, this method only catches one of the very simple cases above.

The conclusion is that there is no standard java URL parser to validate URLs.

Type in cmd.exe Powershell -Help and see the examples.

Possibly the easiest way to make PHP perform a POST request is to use cURL, either as an extension or simply shelling out to another process. Here's a post sample:

// where are we posting to?
$url = 'http://foo.com/script.php';

// what post fields?
$fields = array(
   'field1' => $field1,
   'field2' => $field2,
);

// build the urlencoded data
$postvars = http_build_query($fields);

// open connection
$ch = curl_init();

// set the url, number of POST vars, POST data
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_POST, count($fields));
curl_setopt($ch, CURLOPT_POSTFIELDS, $postvars);

// execute post
$result = curl_exec($ch);

// close connection
curl_close($ch);

Also check out Zend_Http set of classes in the Zend framework, which provides a pretty capable HTTP client written directly in PHP (no extensions required).

2014 EDIT - well, it's been a while since I wrote that. These days it's worth checking Guzzle which again can work with or without the curl extension.

date.setTime(milliseconds);

this is for set milliseconds in date

long milli = date.getTime();

This is for get time in milliseconds.

Returns the number of milliseconds since January 1, 1970, 00:00:00 GMT

I have modified one of the answers (by @op1ekun):

123-(apple(?=-)|banana(?=-)|(?!-))-?456

The reason is that the answer from @op1ekun also matches "123-apple456", without the hyphen after apple.

Go to Visual Studio Menu:

Debug -> Attach to Process

And then click the Select button, as in the image below:

Then make sure the "Automatically determine the type of code to debug" option is selected, like this:

The previous functions didn't work for me, so I've made another function that use the same logic of one of the answers above: parse the formula in the cell to find the referenced range of cells to examine and than look for the coloured cells. You can find a detailed description here: Google Script count coloured with reference, but the code is below:

function countColoured(reference) {
  var sheet = SpreadsheetApp.getActiveSheet();
  var formula = SpreadsheetApp.getActiveRange().getFormula();
  var args = formula.match(/=\w+\((.*)\)/i)[1].split('!');
  try {
    if (args.length == 1) {
      var range = sheet.getRange(args[0]);
    }
    else {
      sheet = ss.getSheetByName(args[0].replace(/'/g, ''));
      range = sheet.getRange(args[1]);
    }
  }
  catch(e) {
    throw new Error(args.join('!') + ' is not a valid range');
  }
  var c = 0;
  var numRows = range.getNumRows();
  var numCols = range.getNumColumns();
  for (var i = 1; i <= numRows; i++) {
    for (var j = 1; j <= numCols; j++) {
      c = c + ( range.getCell(i,j).getBackground() == "#ffffff" ? 0 : 1 );
    }
  }
  return c > 0 ? c : "" ;
}

I managed to render the following SELECT with SQLAlchemy on both layers.

SELECT count(*) AS count_1
FROM "table"

Usage from the SQL Expression layer

from sqlalchemy import select, func, Integer, Table, Column, MetaData

metadata = MetaData()

table = Table("table", metadata,
              Column('primary_key', Integer),
              Column('other_column', Integer)  # just to illustrate
             )   

print select([func.count()]).select_from(table)

Usage from the ORM layer

You just subclass Query (you have probably anyway) and provide a specialized count() method, like this one.

from sqlalchemy.sql.expression import func

class BaseQuery(Query):
    def count_star(self):
        count_query = (self.statement.with_only_columns([func.count()])
                       .order_by(None))
        return self.session.execute(count_query).scalar()

Please note that order_by(None) resets the ordering of the query, which is irrelevant to the counting.

Using this method you can have a count(*) on any ORM Query, that will honor all the filter andjoin conditions already specified.

May be it is the problem of using len() for an integer value. does not posses the len attribute in Python.

Error as:I will give u an example:

number= 1
print(len(num))

Instead of use ths,

data = [1,2,3,4]
print(len(data))

You can't declare an extern local method inside of a method, or any other method with an attribute. Move your DLL import into the class:

using System.Runtime.InteropServices;


public class WindowHandling
{
    [DllImport("User32.dll")]
    public static extern int SetForegroundWindow(IntPtr point);

    public void ActivateTargetApplication(string processName, List<string> barcodesList)
    {
        Process p = Process.Start("notepad++.exe");
        p.WaitForInputIdle();
        IntPtr h = p.MainWindowHandle;
        SetForegroundWindow(h);
        SendKeys.SendWait("k");
        IntPtr processFoundWindow = p.MainWindowHandle;
    }
}

For reasoning about temporal relations (or any other interval relations, come to that), consider Allen's Interval Algebra. It describes the 13 possible relations that two intervals can have with respect to each other. You can find other references — "Allen Interval" seems to be an operative search term. You can also find information about these operations in Snodgrass's Developing Time-Oriented Applications in SQL (PDF available online at URL), and in Date, Darwen and Lorentzos Temporal Data and the Relational Model (2002) or Time and Relational Theory: Temporal Databases in the Relational Model and SQL (2014; effectively the second edition of TD&RM).

The short(ish) answer is: given two date intervals A and B with components .start and .end and the constraint .start <= .end, then two intervals overlap if:

A.end >= B.start AND A.start <= B.end

You can tune the use of >= vs > and <= vs < to meet your requirements for degree of overlap.

ErikE comments:

You can only get 13 if you count things funny... I can get "15 possible relations that two intervals can have" when I go crazy with it. By sensible counting, I get only six, and if you throw out caring whether A or B comes first, I get only three (no intersect, partially intersect, one wholly within other). 15 goes like this: [before:before, start, within, end, after], [start:start, within, end, after], [within:within, end, after], [end:end, after], [after:after].

I think that you cannot count the two entries 'before:before' and 'after:after'. I could see 7 entries if you equate some relations with their inverses (see the diagram in the referenced Wikipedia URL; it has 7 entries, 6 of which have a different inverse, with equals not having a distinct inverse). And whether three is sensible depends on your requirements.

----------------------|-------A-------|----------------------
    |----B1----|
           |----B2----|
               |----B3----|
               |----------B4----------|
               |----------------B5----------------|
                      |----B6----|
----------------------|-------A-------|----------------------
                      |------B7-------|
                      |----------B8-----------|
                         |----B9----|
                         |----B10-----|
                         |--------B11--------|
                                      |----B12----|
                                         |----B13----|
----------------------|-------A-------|----------------------

For this particular case, if using re module is overkill, how about using split (or rsplit) method as

se='</html>'
z.write(article.split(se)[0]+se)

For example,

#!/usr/bin/python

article='''<html>Larala
Ponta Monta 
</html>Kurimon
Waff Moff
'''
z=open('out.txt','w')

se='</html>'
z.write(article.split(se)[0]+se)

outputs out.txt as

<html>Larala
Ponta Monta 
</html>

If you backup a table in Oracle Database. You try the statement below.

CREATE TABLE name_table_bk
AS
SELECT *
  FROM name_table;

I am using Oracle Database 12c.

You can also use PDCurses library. (http://pdcurses.sourceforge.net/)

Copy the installation files into your hard drive. Rename the installer file name to vs_professional.exe for professional edition. Enjoy.

According to this post, it's much better now:

// pick out one album
JObject jalbum = albums[0] as JObject;

// Copy to a static Album instance
Album album = jalbum.ToObject<Album>();

Documentation: Convert JSON to a Type

In NixOS, there is rpmextract. It is a wrapper around rpm2cpio, exactly as @Alan Evangelista wanted. https://github.com/NixOS/nixpkgs/tree/master/pkgs/tools/archivers/rpmextract

We can maintain dynamic height for collection view cell without xib(only using storyboard).

- (CGSize)collectionView:(UICollectionView *)collectionView
                  layout:(UICollectionViewLayout*)collectionViewLayout
  sizeForItemAtIndexPath:(NSIndexPath *)indexPath {

        NSAttributedString* labelString = [[NSAttributedString alloc] initWithString:@"Your long string goes here" attributes:@{NSFontAttributeName:[UIFont systemFontOfSize:17.0]}];
        CGRect cellRect = [labelString boundingRectWithSize:CGSizeMake(cellWidth, MAXFLOAT) options:NSStringDrawingUsesLineFragmentOrigin context:nil];

        return CGSizeMake(cellWidth, cellRect.size.height);
}

Make sure that numberOfLines in IB should be 0.

document.getElementById('drpSelectSourceLibrary').value = 'Seven';

Actually, it is as simple as setting major and minor separately:

In [9]: plot([23, 456, 676, 89, 906, 34, 2345])
Out[9]: [<matplotlib.lines.Line2D at 0x6112f90>]

In [10]: yscale('log')

In [11]: grid(b=True, which='major', color='b', linestyle='-')

In [12]: grid(b=True, which='minor', color='r', linestyle='--')

The gotcha with minor grids is that you have to have minor tick marks turned on too. In the above code this is done by yscale('log'), but it can also be done with plt.minorticks_on().

import java.text.SimpleDateFormat;
import java.text.DateFormat;
import java.util.Date;

public class Main {
   public static void main(String [] args){
       try {
            DateFormat parseFormat = new SimpleDateFormat("dd-MM-yyyy HH:mm a");
            String sDate = "22-01-2019 13:35 PM";
            Date date = parseFormat.parse(sDate);
            SimpleDateFormat displayFormat = new SimpleDateFormat("dd-MM-yyyy hh:mm a");
            sDate = displayFormat.format(date);
            System.out.println("The required format : " + sDate);
        } catch (Exception e) {}
   }
}

In your code, you can find this function:

// Update a particular HTML element with a new value
function updateHTML(elmId, value) {
  document.getElementById(elmId).innerHTML = value;
}

Later on, you call this function with several params:

updateHTML("videoCurrentTime", secondsToHms(ytplayer.getCurrentTime())+' /');
updateHTML("videoDuration", secondsToHms(ytplayer.getDuration()));
updateHTML("bytesTotal", ytplayer.getVideoBytesTotal());
updateHTML("startBytes", ytplayer.getVideoStartBytes());
updateHTML("bytesLoaded", ytplayer.getVideoBytesLoaded());
updateHTML("volume", ytplayer.getVolume());

The first param is used for the "getElementById", but the elements with ID "bytesTotal", "startBytes", "bytesLoaded" and "volume" don't exist. You'll need to create them, since they'll return null.

Use the concatenation operator +, and the fact that numeric types will convert automatically into strings:

var a = 1;
var b = "bob";
var c = b + a;

If you want to see the environment variable you just set, you need to open a new command window.

Variables set with setx variables are available in future command windows only, not in the current command window. (Setx, Examples)

Yeah I had the same problem and it was driving me crazy because I couldn't find the image.

This may help you out...

1. Look for a CSS file in your directories called jquery-ui.css
2. Open it up and search for ui-bg_flat_75_ffffff_40x100.png.

You will then see something like this...

.ui-widget-content {
    border: 1px solid #aaaaaa;
    background: #ffffff url(images/ui-bg_flat_75_ffffff_40x100.png) 50% 50% repeat-x;
    color: #222222;
}

And comment out the background and save the CSS document. Or you can set an absolute path to that background property and see if that works for you. (i.e. background: #ffffff url(http://.../image.png);

Hope this helps

As of version : 1.26.1 (linux), the shortcut is not set by default. To set the shortcut

1. open keyboard shortcuts panel [ctrl + k , ctrl + s]
2. Search for Focus Terminal

3. Set your shortcut

For editor focus is already set by default.

Sorry for reviving this old question. But when using bash there is a very easy approach to create Unicode codepoints from plain ASCII input, which even does not fork at all:

unicode() { local -n a="$1"; local c; printf -vc '\\U%08x' "$2"; printf -va "$c"; }
unicodes() { local a c; for a; do printf -vc '\\U%08x' "$a"; printf "$c"; done; };

Use it as follows to define certain codepoints

unicode crossbones 0x2620
echo "$crossbones"

or to dump the first 65536 unicode codepoints to stdout (takes less than 2s on my machine. The additional space is to prevent certain characters to flow into each other due to shell's monospace font):

for a in {0..65535}; do unicodes "$a"; printf ' '; done

or to tell a little very typical parent's story (this needs Unicode 2010):

unicodes 0x1F6BC 32 43 32 0x1F62D 32 32 43 32 0x1F37C 32 61 32 0x263A 32 32 43 32 0x1F4A9 10

Explanation:

• printf '\UXXXXXXXX' prints out any Unicode character
• printf '\\U%08x' number prints \UXXXXXXXX with the number converted to Hex, this then is fed to another printf to actually print out the Unicode character
• printf recognizes octal (0oct), hex (0xHEX) and decimal (0 or numbers starting with 1 to 9) as numbers, so you can choose whichever representation fits best
• printf -v var .. gathers the output of printf into a variable, without fork (which tremendously speeds up things)
• local variable is there to not pollute the global namespace
• local -n var=other aliases var to other, such that assignment to var alters other. One interesting part here is, that var is part of the local namespace, while other is part of the global namespace.
  • Please note that there is no such thing as local or global namespace in bash. Variables are kept in the environment, and such are always global. Local just puts away the current value and restores it when the function is left again. Other functions called from within the function with local will still see the "local" value. This is a fundamentally different concept than all the normal scoping rules found in other languages (and what bash does is very powerful but can lead to errors if you are a programmer who is not aware of that).

grid is not present on nonrecursivecountcells's scope.

Either make grid a global array, or pass it as a parameter to the function.

In PyCharm 2020.1.4 (Community Edition) on Windows 10 10.0. Under Settings in PyCharm: File > Settings > Project Structure I made two changes in Project Structure: main folder marked as source and odoo folder with all applications I excluded Screenshot shows what I did. After that I restarted PyCharm: File > Invalidate Caches / Restart...

Unresolved references error was removed

ASP.Net Web API has Authorization Server build-in already. You can see it inside Startup.cs when you create a new ASP.Net Web Application with Web API template.

OAuthOptions = new OAuthAuthorizationServerOptions
{
    TokenEndpointPath = new PathString("/Token"),
    Provider = new ApplicationOAuthProvider(PublicClientId),
    AuthorizeEndpointPath = new PathString("/api/Account/ExternalLogin"),
    AccessTokenExpireTimeSpan = TimeSpan.FromDays(14),
    // In production mode set AllowInsecureHttp = false
    AllowInsecureHttp = true
};

All you have to do is to post URL encoded username and password inside query string.

/Token/userName=johndoe%40example.com&password=1234&grant_type=password

If you want to know more detail, you can watch User Registration and Login - Angular Front to Back with Web API by Deborah Kurata.

I want to slightly change the answer given by Wes, because version 0.16.2 requires as_index=False. If you don't set it, you get an empty dataframe.

Source:

Aggregation functions will not return the groups that you are aggregating over if they are named columns, when as_index=True, the default. The grouped columns will be the indices of the returned object.

Passing as_index=False will return the groups that you are aggregating over, if they are named columns.

Aggregating functions are ones that reduce the dimension of the returned objects, for example: mean, sum, size, count, std, var, sem, describe, first, last, nth, min, max. This is what happens when you do for example DataFrame.sum() and get back a Series.

nth can act as a reducer or a filter, see here.

import pandas as pd

df1 = pd.DataFrame({"Name":["Alice", "Bob", "Mallory", "Mallory", "Bob" , "Mallory"],
                    "City":["Seattle","Seattle","Portland","Seattle","Seattle","Portland"]})
print df1
#
#       City     Name
#0   Seattle    Alice
#1   Seattle      Bob
#2  Portland  Mallory
#3   Seattle  Mallory
#4   Seattle      Bob
#5  Portland  Mallory
#
g1 = df1.groupby(["Name", "City"], as_index=False).count()
print g1
#
#                  City  Name
#Name    City
#Alice   Seattle      1     1
#Bob     Seattle      2     2
#Mallory Portland     2     2
#        Seattle      1     1
#

EDIT:

In version 0.17.1 and later you can use subset in count and reset_index with parameter name in size:

print df1.groupby(["Name", "City"], as_index=False ).count()
#IndexError: list index out of range

print df1.groupby(["Name", "City"]).count()
#Empty DataFrame
#Columns: []
#Index: [(Alice, Seattle), (Bob, Seattle), (Mallory, Portland), (Mallory, Seattle)]

print df1.groupby(["Name", "City"])[['Name','City']].count()
#                  Name  City
#Name    City                
#Alice   Seattle      1     1
#Bob     Seattle      2     2
#Mallory Portland     2     2
#        Seattle      1     1

print df1.groupby(["Name", "City"]).size().reset_index(name='count')
#      Name      City  count
#0    Alice   Seattle      1
#1      Bob   Seattle      2
#2  Mallory  Portland      2
#3  Mallory   Seattle      1

The difference between count and size is that size counts NaN values while count does not.

You can use

yourView.center = CGPointMake(CGRectGetMidX(superview.bounds), CGRectGetMidY(superview.bounds))

And In Swift 3.0

yourView.center = CGPoint(x: superview.bounds.midX, y: superview.bounds.midY)

set the type of column named dateposted as DATETIME and run the following query:

INSERT INTO table (`dateposted`) VALUES (CURRENT_TIMESTAMP)

You can also use starts_with and dplyr's select() like so:

df <- df %>% dplyr:: select(starts_with("ABC"))

Here is one of my mistakes that produced this exception: I had a try block without any except or finally blocks. This will not work:

try:
    lets_do_something_beneficial()

To fix this, add an except or finally block:

try:
    lets_do_something_beneficial()
finally:
    lets_go_to_sleep()

Take a look at the write.csv or the write.table functions. You just have to supply the file name the user selects to the file parameter, and the dataframe to the x parameter:

write.csv(x=df, file="myFileName")

https://deanclatworthy.com/tools.html is an IMDB API but has been down due to abuse.

The following works for me.

string strToday = DateTime.Today.ToString("MM/dd/yyyy");

Though this question has an answer, I resolved it differently when I had the same issue. I had this issue when I copied folders with the option Create Folder references; then the above solution of adding the folder to the build_path worked. But when the folder was added using the Create groups for any added folder option, the headers were picked up automatically.

You Only Need to close the bufferedReader i.e reader.close() and it will work fine .

I entirely agree that goto is poor poor coding, but no one has actually answered the question. There is in fact a goto module for Python (though it was released as an April fool joke and is not recommended to be used, it does work).

The accepted answer does not seem quite right to me. There is no point dragging a different version of HttpMime when one can depend on the same version of it.

compile group: 'org.apache.httpcomponents' , name: 'httpclient-android' , version: '4.3.5'
compile (group: 'org.apache.httpcomponents' , name: 'httpmime' , version: '4.3.5') {
    exclude module: 'org.apache.httpcomponents:httpclient'
}

If you spawn a Thread like so - myThread = Thread(target = function) - and then do myThread.start(); myThread.join(). When CTRL-C is initiated, the main thread doesn't exit because it is waiting on that blocking myThread.join() call. To fix this, simply put in a timeout on the .join() call. The timeout can be as long as you wish. If you want it to wait indefinitely, just put in a really long timeout, like 99999. It's also good practice to do myThread.daemon = True so all the threads exit when the main thread(non-daemon) exits.

An anonymous namespace makes the enclosed variables, functions, classes, etc. available only inside that file. In your example it's a way to avoid global variables. There is no runtime or compile time performance difference.

There isn't so much an advantage or disadvantage aside from "do I want this variable, function, class, etc. to be public or private?"

I would like to add something to brilliant @AmiNadimi answer for everyone who going implement his solution in .NET Core 3:

First of all, you should change signature of SignIn method in UserManager class from:

public async void SignIn(HttpContext httpContext, UserDbModel user, bool isPersistent = false)

to:

public async Task SignIn(HttpContext httpContext, UserDbModel user, bool isPersistent = false)

It's because you should never use async void, especially if you work with HttpContext. Source: Microsoft Docs

The last, but not least, your Configure() method in Startup.cs should contains app.UseAuthorization and app.UseAuthentication in proper order:

if (env.IsDevelopment())
{
    app.UseDeveloperExceptionPage();
}
else
{
    app.UseExceptionHandler("/Home/Error");
    // The default HSTS value is 30 days. You may want to change this for production scenarios, see https://aka.ms/aspnetcore-hsts.
    app.UseHsts();
}

app.UseHttpsRedirection();
app.UseStaticFiles();
app.UseAuthentication();
app.UseRouting();
app.UseAuthorization();
app.UseEndpoints(endpoints =>
{
    endpoints.MapControllerRoute(
        name: "default",
        pattern: "{controller=Home}/{action=Index}/{id?}");
});

I had the same problem, and xmltable helped me:

SELECT id, trim(COLUMN_VALUE) text FROM t, xmltable(('"' || REPLACE(text, ',', '","') || '"'))

Application.Exit() kills your application but there are some instances that it won't close the application.

End is better than Application.Exit().

In my implementation, the cell I was referencing could have been several options. I used the following format where 'ws' is the current worksheet being edited

For each ws in Activeworkbook.Worksheets
    For i…
       For j...
...
ws.Cells(i, j).Value = "=HYPERLINK(""#'" & SHEET-REF-VAR & "'!" & CELL-REF-VAR & """,""" & SHEET-REF-VAR & """)"

Make sure you are on the right directory where you have package.json

It is posible. My android device version is 4.0.4 and android.os.Build.VERSION.SDK_INT is 15

I have 3 spinners

Spinner c_fruit=(Spinner) findViewById(R.id.fruits);
Spinner c_vegetable=(Spinner) findViewById(R.id.vegetables);
Spinner c_beverage=(Spinner) findViewById(R.id.beverages);

And also I have a Async-Tack class.

Here is my spinner loading code

RequestSend reqs_fruit = new RequestSend(this);
reqs_fruit.where="Get_fruit_List";
reqs_fruit.title="Loading fruit";
reqs_fruit.execute();

RequestSend reqs_vegetable = new RequestSend(this);
reqs_vegetable.where="Get_vegetable_List";
reqs_vegetable.title="Loading vegetable";
reqs_vegetable.execute();

RequestSend reqs_beverage = new RequestSend(this);
reqs_beverage.where="Get_beverage_List";
reqs_beverage.title="Loading beverage";
reqs_beverage.execute();

This is working perfectly. One by one my spinners loaded. I didn't user executeOnExecutor.

Here is my Async-task class

public class RequestSend  extends AsyncTask<String, String, String > {

    private ProgressDialog dialog = null;
    public Spinner spin;
    public String where;
    public String title;
    Context con;
    Activity activity;      
    String[] items;

    public RequestSend(Context activityContext) {
        con = activityContext;
        dialog = new ProgressDialog(activityContext);
        this.activity = activityContext;
    }

    @Override
    protected void onPostExecute(String result) {
        try {
            ArrayAdapter<String> adapter = new ArrayAdapter<String> (activity, android.R.layout.simple_spinner_item, items);       
            adapter.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item);
            spin.setAdapter(adapter);
        } catch (NullPointerException e) {
            Toast.makeText(activity, "Can not load list. Check your connection", Toast.LENGTH_LONG).show();
            e.printStackTrace();
        } catch (Exception e)  {
            Toast.makeText(activity, "Can not load list. Check your connection", Toast.LENGTH_LONG).show();
            e.printStackTrace();
        }
        super.onPostExecute(result);

        if (dialog != null)
            dialog.dismiss();   
    }

    protected void onPreExecute() {
        super.onPreExecute();
        dialog.setTitle(title);
        dialog.setMessage("Wait...");
        dialog.setCancelable(false); 
        dialog.show();
    }

    @Override
    protected String doInBackground(String... Strings) {
        try {
            Send_Request();
            } catch (NullPointerException e) {
                e.printStackTrace();
            } catch (Exception e) {
                e.printStackTrace();
            }
        return null;
    }

    public void Send_Request() throws JSONException {

        try {
            String DataSendingTo = "http://www.example.com/AppRequest/" + where;
            //HttpClient
            HttpClient httpClient = new DefaultHttpClient();
            //Post header
            HttpPost httpPost = new HttpPost(DataSendingTo);
            //Adding data
            List<NameValuePair> nameValuePairs = new ArrayList<NameValuePair>(2);

            nameValuePairs.add(new BasicNameValuePair("authorized","001"));

            httpPost.setEntity(new UrlEncodedFormEntity(nameValuePairs));
            // execute HTTP post request
            HttpResponse response = httpClient.execute(httpPost);

            BufferedReader reader;
            try {
                reader = new BufferedReader(new InputStreamReader(response.getEntity().getContent()));
                StringBuilder builder = new StringBuilder();
                String line = null;
                while ((line = reader.readLine()) != null) {
                    builder.append(line) ;
                }

                JSONTokener tokener = new JSONTokener(builder.toString());
                JSONArray finalResult = new JSONArray(tokener);
                items = new String[finalResult.length()]; 
                // looping through All details and store in public String array
                for(int i = 0; i < finalResult.length(); i++) {
                    JSONObject c = finalResult.getJSONObject(i);
                    items[i]=c.getString("data_name");
                }

            } catch (ClientProtocolException e) {
                e.printStackTrace();
            } catch (IOException e) {
                e.printStackTrace();
            }

        } catch (ClientProtocolException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
        }
    }
}

No. No, no, a thousand times no.

What is evil is making a reference to a dynamically allocated object and losing the original pointer. When you new an object you assume an obligation to have a guaranteed delete.

But have a look at, eg, operator<<: that must return a reference, or

cout << "foo" << "bar" << "bletch" << endl ;

won't work.

According to the examples base64 encoding is directly supported, although I've not tested it myself. Take your base64 string (derived from a file or loaded with any other method, POST/GET, websockets etc), turn it to a binary with atob, and then parse this to getDocument on the PDFJS API likePDFJS.getDocument({data: base64PdfData}); Codetoffel answer does work just fine for me though.

Lets consider you have a class name named Products and you have a IsActive field. just you need a create constructor :

Public class Products
{
    public Products()
    {
       IsActive = true;
    }
 public string Field1 { get; set; }
 public string Field2 { get; set; }
 public bool IsActive { get; set; }
}

Then your IsActive default value is True!

Edite :

if you want to do this with SQL use this command :

protected override void OnModelCreating(ModelBuilder modelBuilder)
{
    modelBuilder.Entity<Blog>()
        .Property(b => b.IsActive)
        .HasDefaultValueSql("true");
}

I fixed it by changing line 10 of:

/node_modules/mongoose/node_modules/mongodb/node_modules/bson/ext/index.js 

from:

bson = require('../build/Release/bson');

to:

bson = require('bson');

Using css zebra styling

Copy paste this example and see the header fixed.

       <style>
       .zebra tr:nth-child(odd){
       background:white;
       color:black;
       }

       .zebra tr:nth-child(even){
       background: grey;
       color:black;
       }

      .zebra tr:nth-child(1) {
       background:black;
       color:yellow;
       position: fixed;
       margin:-30px 0px 0px 0px;
       }
       </style>


   <DIV  id= "stripped_div"

         class= "zebra"
         style = "
            border:solid 1px red;
            height:15px;
            width:200px;
            overflow-x:none;
            overflow-y:scroll;
            padding:30px 0px 0px 0px;"
            >

                <table>
                   <tr >
                       <td>Name:</td>
                       <td>Age:</td>
                   </tr>
                    <tr >
                       <td>Peter</td>
                       <td>10</td>
                   </tr>
                </table>

    </DIV>

Notice the top padding of of 30px in the div leaves space that is utilized by the 1st row of stripped data ie tr:nth-child(1) that is "fixed position" and formatted to a margin of -30px

So I figured out what is wrong with this statement:

Import-Csv H:\Programs\scripts\SomeText.csv |`

(Original)

Import-Csv H:\Programs\scripts\SomeText.csv -Delimiter "|"

(Proposed, You must use quotations; otherwise, it will not work and ISE will give you an error)

It requires the -Delimiter "|", in order for the variable to be populated with an array of items. Otherwise, Powershell ISE does not display the list of items.

I cannot say that I would recommend the | operator, since it is used to pipe cmdlets into one another.

I still cannot get the if statement to return true and output the values entered via the prompt.

If anyone else can help, it would be great. I still appreciate the post, it has been very helpful!

You can use n-number of recipient below method:

  String to[] = {"[email protected]"} //Mail id you want to send;
  InternetAddress[] address = new InternetAddress[to.length];
  for(int i =0; i< to.length; i++)
  {
      address[i] = new InternetAddress(to[i]);
  }

   msg.setRecipients(Message.RecipientType.TO, address);

There are not many good reasons this would fail, especially the regsvr32 step. Run dumpbin /exports on that dll. If you don't see DllRegisterServer then you've got a corrupt install. It should have more side-effects, you wouldn't be able to build C/C++ projects anymore.

One standard failure mode is running this on a 64-bit operating system. This is 32-bit unmanaged code, you would indeed get the 'class not registered' exception. Project + Properties, Build tab, change Platform Target to x86.

var groupedCustomerList = userList
    .GroupBy(u => u.GroupID)
    .Select(grp => grp.ToList())
    .ToList();

realpath <path to the symlink file> should do the trick.

Just a quick note to add that the compiler for Xamarin actually got this wrong and it allows fallthrough. It has supposedly been fixed, but has not been released. Discovered this in some code that actually was falling through and the compiler did not complain.

Parsing string with moment.js.

const date = '1231231231231' //Example String date
const parsed = moment(+date);

This page has a very simple example of calling functions from a DLL file.

Paraphrasing the details here for completeness:

It's very easy to call a DLL function in Python. I have a self-made DLL file with two functions: add and sub which take two arguments.

add(a, b) returns addition of two numbers
sub(a, b) returns substraction of two numbers

The name of the DLL file will be "demo.dll"

Program:

from ctypes import*
# give location of dll
mydll = cdll.LoadLibrary("C:\\demo.dll")
result1= mydll.add(10,1)
result2= mydll.sub(10,1)
print "Addition value:"+result1
print "Substraction:"+result2

Output:

Addition value:11
Substraction:9

For a 2d numpy array, simply use imshow() may help you:

import matplotlib.pyplot as plt
import numpy as np


def heatmap2d(arr: np.ndarray):
    plt.imshow(arr, cmap='viridis')
    plt.colorbar()
    plt.show()


test_array = np.arange(100 * 100).reshape(100, 100)
heatmap2d(test_array)

This code produces a continuous heatmap.

You can choose another built-in colormap from here.

With jQuery it will be something like that:

$(document).ready(function() {
  $('#yourDiv').on('mousedown', function(e) {
      e.preventDefault();
  });
});

In my case I wanted to disable the user from drop text in the inputs so I used "drop" instead "mousedown".

$(document).ready(function() {
  $('input').on('drop', function(event) {
    event.preventDefault();
  });
});

Instead event.preventDefault() you can return false. Here's the difference.

And the code:

$(document).ready(function() {
  $('input').on('drop', function() {
    return false;
  });
});

Personally, I would define it this way:

function isVowel( chr ){ return 'aeiou'.indexOf( chr[0].toLowerCase() ) !== -1 }

You could also use ['a','e','i','o','u'] and skip the length test, but then you are creating an array each time you call the function. (There are ways of mimicking this via closures, but those are a bit obscure to read)

just do it as follows in your html write:

<button ng-click="going()">goto</button>

And in your controller, add $state as follows:

.controller('homeCTRL', function($scope, **$state**) {

$scope.going = function(){

$state.go('your route');

}

})

The easiest way, which I use

def is_int(item: str) -> bool:
    return item.lstrip('-+').isnumeric()

Used a combination of Rob's response.

final String resourceDir = "resourceDirectory/";
List<String> files = IOUtils.readLines(Thread.currentThread().getClass().getClassLoader().getResourceAsStream(resourceDir), Charsets.UTF_8);

for(String f : files){
  String data= IOUtils.toString(Thread.currentThread().getClass().getClassLoader().getResourceAsStream(resourceDir + f));
  ....process data
}

In PowerShell you can use the command Set-Service:

Set-Service -Name Winmgmt -StartupType Manual

I haven't found a PowerShell command to view the startup type though. One would assume that the command Get-Service would provide that, but it doesn't seem to.

Place this line before the closing script tag,writing from memory:

window.onload  = GetTimeZoneOffset;

i think the question is how to call the javascript function on pageload

I had to search a nested sitemap structure for the first leaf item that machtes a given path. I came up with the following code just using .map() .filter() and .reduce. Returns the last item found that matches the path /c.

var sitemap = {
  nodes: [
    {
      items: [{ path: "/a" }, { path: "/b" }]
    },
    {
      items: [{ path: "/c" }, { path: "/d" }]
    },
    {
      items: [{ path: "/c" }, { path: "/d" }]
    }
  ]
};

const item = sitemap.nodes
  .map(n => n.items.filter(i => i.path === "/c"))
  .reduce((last, now) => last.concat(now))
  .reduce((last, now) => now);

Here is a simple AFNetworking POST I'm using. To get up and running after reading the AFNetworking doc, wkiki, ref, etc, I learned a lot by following http://nsscreencast.com/episodes/6-afnetworking and understanding the associated code sample on github.

 // Add this to the class you're working with - (id)init {}
    _netInst = [MyApiClient sharedAFNetworkInstance];

  // build the dictionary that AFNetworkng converts to a json object on the next line
  //  params = {"user":{"email":emailAddress,"password":password}};
  NSDictionary *parameters =[NSDictionary dictionaryWithObjectsAndKeys:
                             userName, @"email", password, @"password", nil];
  NSDictionary *params =[NSDictionary dictionaryWithObjectsAndKeys:
                         parameters, @"user", nil];

   [_netInst postPath: @"users/login.json" parameters:params
      success:^(AFHTTPRequestOperation *operation, id jsonResponse) {
        NSLog (@"SUCCESS");

        // jsonResponse = {"user":{"accessId":1234,"securityKey":"abc123"}};
        _accessId = [jsonResponse valueForKeyPath:@"user.accessid"];
        _securityKey = [jsonResponse valueForKeyPath:@"user.securitykey"];

        return SUCCESS;
      }
      failure:^(AFHTTPRequestOperation *operation, NSError *error) {
        NSLog(@"FAILED");

        // handle failure

        return error;
      }
   ];  

1.Added these codes to at the end of your app/build.gradle:

configurations.all {
   resolutionStrategy.force 'com.android.support:support-v4:28.0.0' 
   // the above lib may be old dependencies version       
    }

2.Modified sdk and tools version to 28:

compileSdkVersion 28
buildToolsVersion '28.0.3'
targetSdkVersion  28

3.In your AndroidManifest.xml file, you should add two line:

<application
    android:name=".YourApplication"
    android:appComponentFactory="AnyStrings"
    tools:replace="android:appComponentFactory"
    android:icon="@drawable/icon"
    android:label="@string/app_name"
    android:largeHeap="true"
    android:theme="@style/Theme.AppCompat.Light.NoActionBar">

Or Simply

• Go to Refactor (Studio -> Menu -> Refactor)
• Click the Migrate to AndroidX. it's working
• it's working.

<input type='text' minlength=3 /><br />

if browser supports html5,

it will automatical be validate attributes(minlength) in tag

but Safari(iOS) doesn't working

All solutions work great, except when applied in programming languages that closures (e.g. Coda, Excel, Spreadsheet's REGEXREPLACE).

Two original solutions of mine below use only 1 concatenation and 1 regex.

Method #1: Lookup for replacement values

The idea is to append replacement values if they are not already in the string. Then, using a single regex, we perform all needed replacements:

var str = "I have a cat, a dog, and a goat.";
str = (str+"||||cat,dog,goat").replace(
   /cat(?=[\s\S]*(dog))|dog(?=[\s\S]*(goat))|goat(?=[\s\S]*(cat))|\|\|\|\|.*$/gi, "$1$2$3");
document.body.innerHTML = str;

Explanations:

• cat(?=[\s\S]*(dog)) means that we look for "cat". If it matches, then a forward lookup will capture "dog" as group 1, and "" otherwise.
• Same for "dog" that would capture "goat" as group 2, and "goat" that would capture "cat" as group 3.
• We replace with "$1$2$3" (the concatenation of all three groups), which will always be either "dog", "cat" or "goat" for one of the above cases
• If we manually appended replacements to the string like str+"||||cat,dog,goat", we remove them by also matching \|\|\|\|.*$, in which case the replacement "$1$2$3" will evaluate to "", the empty string.

Method #2: Lookup for replacement pairs

One problem with Method #1 is that it cannot exceed 9 replacements at a time, which is the maximum number of back-propagation groups. Method #2 states not to append just replacement values, but replacements directly:

var str = "I have a cat, a dog, and a goat.";
str = (str+"||||,cat=>dog,dog=>goat,goat=>cat").replace(
   /(\b\w+\b)(?=[\s\S]*,\1=>([^,]*))|\|\|\|\|.*$/gi, "$2");
document.body.innerHTML = str;

Explanations:

• (str+"||||,cat=>dog,dog=>goat,goat=>cat") is how we append a replacement map to the end of the string.
• (\b\w+\b) states to "capture any word", that could be replaced by "(cat|dog|goat) or anything else.
• (?=[\s\S]*...) is a forward lookup that will typically go to the end of the document until after the replacement map.
  • ,\1=> means "you should find the matched word between a comma and a right arrow"
  • ([^,]*) means "match anything after this arrow until the next comma or the end of the doc"
• |\|\|\|\|.*$ is how we remove the replacement map.

You can also produce array by using file:

$array = file('/path/to/text.txt');

Normal array can serve as a dictionary data structure. In general it has multipurpose usage: array, list (vector), hash table, dictionary, collection, stack, queue etc.

$names = [
    'bob' => 27,
    'billy' => 43,
    'sam' => 76,
];

$names['bob'];

And because of wide design it gains no full benefits of specific data structure. You can implement your own dictionary by extending an ArrayObject or you can use SplObjectStorage class which is map (dictionary) implementation allowing objects to be assigned as keys.

    SELECT art.* , sec.section.title, cat.title, use1.name, use2.name as modifiedby
FROM article art
INNER JOIN section sec ON art.section_id = sec.section.id
INNER JOIN category cat ON art.category_id = cat.id
INNER JOIN user use1 ON art.author_id = use1.id
LEFT JOIN user use2 ON art.modified_by = use2.id
WHERE art.id = '1';

Hope This Might Help

Here are two more ways to write a pure PowerShell function to join an arbitrary number of components into a path.

This first function uses a single array to store all of the components and then a foreach loop to combine them:

function Join-Paths {
    Param(
        [Parameter(mandatory)]
        [String[]]
        $Paths
    )
    $output = $Paths[0]
    foreach($path in $Paths[1..$Paths.Count]) {
        $output = Join-Path $output -ChildPath $path
    }
    $output
}

Because the path components are elements in an array and all part of a single argument, they must be separated by commas. Usage is as follows:

PS C:\> Join-Paths 'C:', 'Program Files', 'Microsoft Office'
C:\Program Files\Microsoft Office

A more minimalist way to write this function is to use the built-in $args variable, and then collapse the foreach loop into a single line using Mike Fair's method.

function Join-Paths2 {
    $path = $args[0]
    $args[1..$args.Count] | %{ $path = Join-Path $path $_ }
    $path
}

Unlike the previous version of the function, each path component is a separate argument, so only a space is necessary to separate the arguments:

PS C:\> Join-Paths2 'C:' 'Program Files' 'Microsoft Office'
C:\Program Files\Microsoft Office

Look at the Map interface, and at the concrete class HashMap.

To create a Map:

Map<String, String> assoc = new HashMap<String, String>();

To add a key-value pair:

assoc.put("name", "demo");

To retrieve the value associated with a key:

assoc.get("name")

And sure, you may create an array of Maps, as it seems to be what you want:

Map<String, String>[] assoc = ...

look it this piece of code from my project

I'm trying to re-order the list based on a property inside my model,

 allEmployees = new List<Employee>(allEmployees.OrderByDescending(employee => employee.Name));

but I faced a problem when a small and capital letters exist, so to solve it, I used the string comparer.

allEmployees.OrderBy(employee => employee.Name,StringComparer.CurrentCultureIgnoreCase)

Instead of command: docker run

You should use:

docker start **CONTAINER ID**

because the container is already exist

More info

Just a note which may be helpful- I was having this trouble with Apache on my laptop (which connects by wifi AFTER startup), and restarting the server (after connect) fixed the issue. I guess in my case this may be to do with apache starting offline and perhaps there noting that DNS lookups fail?

You can also write this in mysql -

SELECT  DATE_FORMAT(create_date, '%m/%d/%Y')
FROM    mytable
WHERE   create_date < DATE_ADD(NOW(), INTERVAL -1 MONTH);

FIXED

Use CSS3

.container {
   -webkit-column-count: 2;
      -moz-column-count: 2;
           column-count: 2;

   -webkit-column-gap: 20px;
      -moz-column-gap: 20px;
           column-gap: 20px;
}

Browser Support

• Chrome 4.0+ (-webkit-)
• IE 10.0+
• Firefox 2.0+ (-moz-)
• Safari 3.1+ (-webkit-)
• Opera 15.0+ (-webkit-)

If the value of a disabled textbox needs to be retained when a form is cleared (reset), disabled = "disabled" has to be used, as read-only textbox will not retain the value

For Example:

HTML

Textbox

<input type="text" id="disabledText" name="randombox" value="demo" disabled="disabled" />

Reset button

<button type="reset" id="clearButton">Clear</button>

In the above example, when Clear button is pressed, disabled text value will be retained in the form. Value will not be retained in the case of input type = "text" readonly="readonly"

You need to install this extension to Visual Studio 2017/2019 in order to get access to the Installer Projects.

According to the page:

This extension provides the same functionality that currently exists in Visual Studio 2015 for Visual Studio Installer projects. To use this extension, you can either open the Extensions and Updates dialog, select the online node, and search for "Visual Studio Installer Projects Extension," or you can download directly from this page.

Once you have finished installing the extension and restarted Visual Studio, you will be able to open existing Visual Studio Installer projects, or create new ones.

Late but more complete answer in point of getting the most advanced date from $Output

## Q:\test\2011\02\SO_5097125.ps1
## simulate object input with a here string 
$Output = @"
"Date"
"Monday, April 08, 2013 12:00:00 AM"
"Friday, April 08, 2011 12:00:00 AM"
"@ -split '\r?\n' | ConvertFrom-Csv

## use Get-Date and calculated property in a pipeline
$Output | Select-Object @{n='Date';e={Get-Date $_.Date}} |
    Sort-Object Date | Select-Object -Last 1 -Expand Date

## use Get-Date in a ForEach-Object
$Output.Date | ForEach-Object{Get-Date $_} |
    Sort-Object | Select-Object -Last 1

## use [datetime]::ParseExact
## the following will only work if your locale is English for day, month day abbrev.
$Output.Date | ForEach-Object{
    [datetime]::ParseExact($_,'dddd, MMMM dd, yyyy hh:mm:ss tt',$Null)
} | Sort-Object | Select-Object -Last 1

## for non English locales
$Output.Date | ForEach-Object{
    [datetime]::ParseExact($_,'dddd, MMMM dd, yyyy hh:mm:ss tt',[cultureinfo]::InvariantCulture)
} | Sort-Object | Select-Object -Last 1

## in case the day month abbreviations are in other languages, here German
## simulate object input with a here string 
$Output = @"
"Date"
"Montag, April 08, 2013 00:00:00"
"Freidag, April 08, 2011 00:00:00"
"@ -split '\r?\n' | ConvertFrom-Csv
$CIDE = New-Object System.Globalization.CultureInfo("de-DE")
$Output.Date | ForEach-Object{
    [datetime]::ParseExact($_,'dddd, MMMM dd, yyyy HH:mm:ss',$CIDE)
} | Sort-Object | Select-Object -Last 1

Can use map and lambda

lst = [1,1,1,1,1,1,1,1,1]

print all(map(lambda x: x == lst[0], lst[1:]))

You can use pandas library and reference the rows and columns like this:

import pandas as pd

input = pd.read_csv("path_to_file");

#for accessing ith row:
input.iloc[i]

#for accessing column named X
input.X

#for accessing ith row and column named X
input.iloc[i].X

UPDATED: (After @EranMarom pointed out on his comment)

You can stop horizontal scrolling or vertical scrolling in the ScrollViewDelegate Method. Here it is how,

Stops Horizontal Scrolling:

If you want to scroll horizontally, then you need to increase the contentOffset.x. Preventing that stops the scrollview scroll in horizontal direction.

- (void)scrollViewDidScroll:(UIScrollView *)sender {
    sender.contentOffset.x = 0.0
}

Stops Vertical Scrolling:

If you want to scroll vertically, then you need to increase the contentOffset.y. Preventing that stops the scrollview scroll in vertical direction.

- (void)scrollViewDidScroll:(UIScrollView *)sender {
    sender.contentOffset.y = 0.0
}

Above code prevents the changes in x and y of a scrollview contentOffset and it leads to stop the scrolling in scrollViewDidScroll: method.

No, the <select> control is a system-level control, not a client-level control in IE. A few versions back it didn't even play nicely-with z-index, putting itself on top of virtually everything.

To do anything fancy you'll have to emulate the functionality using CSS and your own elements.

0

Right click "drawable" Click on "New", then "Image Asset" Change "Icon Type" to "Action Bar and Tab Icons" Change "Asset Type" to "Clip Art" for icon & "Image" for images For Icon: Click on "Clip Art" icon button & choose your icon For Image: Click on "Path" folder icon & choose your image For "Name" type in your icon / image file name

If we use Kotlin it is shorter. Example of class which responds for provide call logs:

import android.content.Context
import android.database.Cursor
import android.provider.CallLog.Calls.*

class CallsLoader {

    fun getCallLogs(context: Context): List<List<String?>> {
        val c = context.applicationContext
        val projection = arrayOf(CACHED_NAME, NUMBER, TYPE, DATE, DURATION)

        val cursor = c.contentResolver.query(
             CONTENT_URI,
             projection,
             null,
             null,
             null,
             null
          )

         return cursorToMatrix(cursor)
     }

    private fun cursorToMatrix(cursor: Cursor?): List<List<String?>> {
        val matrix = mutableListOf<List<String?>>()
        cursor?.use {
             while (it.moveToNext()) {
                 val list = listOf(
                    it.getStringFromColumn(CACHED_NAME),
                    it.getStringFromColumn(NUMBER),
                    it.getStringFromColumn(TYPE),
                    it.getStringFromColumn(DATE),
                    it.getStringFromColumn(DURATION)
                 )

                 matrix.add(list.toList())
             }
          }

          return matrix
      }

     private fun Cursor.getStringFromColumn(columnName: String) =
        getString(getColumnIndex(columnName))
}

We can also convert cursor to map:

fun getCallLogs(context: Context): Map<String, Array<String?>> {
    val c = context.applicationContext
    val projection = arrayOf(CACHED_NAME, NUMBER, TYPE, DATE, DURATION)

    val cursor = c.contentResolver.query(
        CONTENT_URI,
        projection,
        null,
        null,
        null,
        null
    )

    return cursorToMap(cursor)
}

private fun cursorToMap(cursor: Cursor?): Map<String, Array<String?>> {
    val arraySize = cursor?.count ?: 0
    val map = mapOf(
        CACHED_NAME to Array<String?>(arraySize) { "" },
        NUMBER to Array<String?>(arraySize) { "" },
        TYPE to Array<String?>(arraySize) { "" },
        DATE to Array<String?>(arraySize) { "" },
        DURATION to Array<String?>(arraySize) { "" }
    )

    cursor?.use {
        for (i in 0 until arraySize) {
            it.moveToNext()

            map[CACHED_NAME]?.set(i, it.getStringFromColumn(CACHED_NAME))
            map[NUMBER]?.set(i, it.getStringFromColumn(NUMBER))
            map[TYPE]?.set(i, it.getStringFromColumn(TYPE))
            map[DATE]?.set(i, it.getStringFromColumn(DATE))
            map[DURATION]?.set(i, it.getStringFromColumn(DURATION))
        }
    }

    return map
}

Date today = DateUtils.truncate(new Date(), Calendar.DAY_OF_MONTH);

DateUtils from Apache Commons-Lang. Watch out for time zone!

Once you have Selected a group of sheets, you can use Selection

Consider:

Sub luxation()
    ThisWorkbook.Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
    Selection.ExportAsFixedFormat _
        Type:=xlTypePDF, _
        Filename:="C:\TestFolder\temp.pdf", _
        Quality:=xlQualityStandard, _
        IncludeDocProperties:=True, _
        IgnorePrintAreas:=False, _
        OpenAfterPublish:=True
End Sub

EDIT#1:

Further testing has reveled that this technique depends on the group of cells selected on each worksheet. To get a comprehensive output, use something like:

Sub Macro1()

   Sheets("Sheet1").Activate
   ActiveSheet.UsedRange.Select
   Sheets("Sheet2").Activate
   ActiveSheet.UsedRange.Select
   Sheets("Sheet3").Activate
   ActiveSheet.UsedRange.Select

   ThisWorkbook.Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
   Selection.ExportAsFixedFormat Type:=xlTypePDF, Filename:= _
      "C:\Users\James\Desktop\pdfmaker.pdf", Quality:=xlQualityStandard, _
      IncludeDocProperties:=True, IgnorePrintAreas:=False, OpenAfterPublish:= _
      True
End Sub

I tried most of the answers but still couldn't get it to work. This worked for me:

right click on reference -> properties -> change 'Specific Version' to false.

Hope this Helps.

Just add style="table-layout: fixed ; width: 100%;" inside <table> tag and also if you do not specify any styles and add just style=" width: 100%;" inside <table> You will be able to resolve it.

For standalone mode you could use compact or repair,

For sharded cluster or replica set, in my experience, after you running compact on the primary, followed by compact the secondary, the size of primary database reduced, but not the secondary. You might want to do resync member to reduce the size of secondary database. and by doing this you might find that the size of secondary database is even more reduced than the primary, i guess the compact command not really compacting the collection. So, i ended up switching the primary and secondary of the replica set and doing resync member again.

my conclusion is, the best way to reduce the size of sharded/replica set is by doing resync member, switch primary secondary, and resync again.

Or just use $json as an object:

$json->$user = array("first" => $first, "last" => $last);

This is how it is returned without the second parameter (as an instance of stdClass).

   Please try this for get the url of root file.

First Way:

 $path = get_home_path();
   print "Path: ".$path; 
// Return "Path: /var/www/htdocs/" or

// "Path: /var/www/htdocs/wordpress/" if it is subfolder

Second Way:

And you can also use 

    "ABSPATH"

this constant is define in wordpress config file.

This Actually worked for me in chrome. I was pretty suprised.

jQuery(document).bind("keyup keydown", function(e){
    if(e.ctrlKey && e.keyCode == 80){
         Print(); e.preventDefault();
    }
});

Where Print is a function I wrote that calls window.print(); It also works as a pure blocker if you disable Print();

As noted here by user3017502

window.print() will pause so you can add an onPrintFinish or onPrintBegin like this

function Print(){
    onPrintBegin
    window.print();
    onPrintFinish(); 
}

No, it sets all members/elements that haven't been explicitly set to their default-initialisation value, which is zero for numeric types.

JBoss has an MBean called Server. That reports the build and version of JBoss itself. Once you know the version, you can see what components are involved. It is not that well cataloged, but you can see it in the release notes.

To test and see if you can access your MQTT server from outside world (outside of your VM or local machine), you can install one of the MQTT publishing and monitoring tools such as MQTT-Spy on your outside-world machine and then subscribe for '#" (meaning all the topics).

You can follow this by the method @hardillb mentioned in his answer above and test back and forth such as this:

On the machine with Mosquitto Server running,

On the outside-word machine with mqtt-spy running,

I have mainly mentioned mqtt-spy since it's multi-platform and easy to use. You can go with any other tool really. And also to my knowledge to run the mosquitto_sub and mosquitto_pub you need to have mosquitto-clients installed on your Linux machine running the test (in my case Ubuntu) which can be done easily by,

sudo apt-get install mosquitto-clients

You may want to read this: "“Out Of Memory” Does Not Refer to Physical Memory" by Eric Lippert.

In short, and very simplified, "Out of memory" does not really mean that the amount of available memory is too small. The most common reason is that within the current address space, there is no contiguous portion of memory that is large enough to serve the wanted allocation. If you have 100 blocks, each 4 MB large, that is not going to help you when you need one 5 MB block.

Key Points:

• the data storage that we call “process memory” is in my opinion best visualized as a massive file on disk.
• RAM can be seen as merely a performance optimization
• Total amount of virtual memory your program consumes is really not hugely relevant to its performance
• "running out of RAM" seldom results in an “out of memory” error. Instead of an error, it results in bad performance because the full cost of the fact that storage is actually on disk suddenly becomes relevant.

Just put .htaccess into the folder you want to restrict

## no access to this folder

# Apache 2.4
<IfModule mod_authz_core.c>
    Require all denied
</IfModule>

# Apache 2.2
<IfModule !mod_authz_core.c>
    Order Allow,Deny
    Deny from all
</IfModule>

Source: MantisBT sources.

To specify a directory to search for (binary) libraries, you just use -L:

-L/data[...]/lib

To specify the actual library name, you use -l:

-lfoo  # (links libfoo.a or libfoo.so)

To specify a directory to search for include files (different from libraries!) you use -I:

-I/data[...]/lib

So I think what you want is something like

g++ -g -Wall -I/data[...]/lib testing.cpp fileparameters.cpp main.cpp -o test

These compiler flags (amongst others) can also be found at the GNU GCC Command Options manual:

• 3.16 Options for Directory Search

string a = i.ToString();
string b = Convert.ToString(i);
string c = string.Format("{0}", i);
string d = $"{i}";
string e = "" + i;
string f = string.Empty + i;
string g = new StringBuilder().Append(i).ToString();

I am sharing my code. form1.cs:-

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;

namespace BorderExp
{
public partial class Form1 : Form
{
    public Form1()
    {
        InitializeComponent();
    }

    private void Form1_Load(object sender, EventArgs e)
    {
        FormBorderStyle = System.Windows.Forms.FormBorderStyle.None;

    }

    private void ExitClick(object sender, EventArgs e)
    {
        Application.Exit();
    }

    private void MaxClick(object sender, EventArgs e)
    {
        if (WindowState ==FormWindowState.Normal)
        {
            this.WindowState = FormWindowState.Maximized;
        }
        else
        {
            this.WindowState = FormWindowState.Normal;
        }
    }

    private void MinClick(object sender, EventArgs e)
    {
        this.WindowState = FormWindowState.Minimized;
       }
    }
    }

Now, the designer:-

namespace BorderExp
 {
   partial class Form1
  {
    /// <summary>
    /// Required designer variable.
    /// </summary>
    private System.ComponentModel.IContainer components = null;

    /// <summary>
    /// Clean up any resources being used.
    /// </summary>
    /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
    protected override void Dispose(bool disposing)
    {
        if (disposing && (components != null))
        {
            components.Dispose();
        }
        base.Dispose(disposing);
    }

    #region Windows Form Designer generated code

    /// <summary>
    /// Required method for Designer support - do not modify
    /// the contents of this method with the code editor.
    /// </summary>
    private void InitializeComponent()
    {
        this.button1 = new System.Windows.Forms.Button();
        this.button2 = new System.Windows.Forms.Button();
        this.button3 = new System.Windows.Forms.Button();
        this.SuspendLayout();
        // 
        // button1
        // 
        this.button1.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
        this.button1.BackColor = System.Drawing.SystemColors.ButtonFace;
        this.button1.BackgroundImage = global::BorderExp.Properties.Resources.blank_1_;
        this.button1.FlatAppearance.BorderSize = 0;
        this.button1.FlatAppearance.MouseOverBackColor = System.Drawing.Color.FromArgb(((int)(((byte)(224)))), ((int)(((byte)(224)))), ((int)(((byte)(224)))));
        this.button1.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
        this.button1.Location = new System.Drawing.Point(376, 1);
        this.button1.Name = "button1";
        this.button1.Size = new System.Drawing.Size(27, 26);
        this.button1.TabIndex = 0;
        this.button1.Text = "X";
        this.button1.UseVisualStyleBackColor = false;
        this.button1.Click += new System.EventHandler(this.ExitClick);
        // 
        // button2
        // 
        this.button2.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
        this.button2.BackColor = System.Drawing.SystemColors.ButtonFace;
        this.button2.BackgroundImage = global::BorderExp.Properties.Resources.blank_1_;
        this.button2.FlatAppearance.BorderSize = 0;
        this.button2.FlatAppearance.MouseOverBackColor = System.Drawing.Color.FromArgb(((int)(((byte)(224)))), ((int)(((byte)(224)))), ((int)(((byte)(224)))));
        this.button2.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
        this.button2.Location = new System.Drawing.Point(343, 1);
        this.button2.Name = "button2";
        this.button2.Size = new System.Drawing.Size(27, 26);
        this.button2.TabIndex = 1;
        this.button2.Text = "[]";
        this.button2.UseVisualStyleBackColor = false;
        this.button2.Click += new System.EventHandler(this.MaxClick);
        // 
        // button3
        // 
        this.button3.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
        this.button3.BackColor = System.Drawing.SystemColors.ButtonFace;
        this.button3.BackgroundImage = global::BorderExp.Properties.Resources.blank_1_;
        this.button3.FlatAppearance.BorderSize = 0;
        this.button3.FlatAppearance.MouseOverBackColor = System.Drawing.Color.FromArgb(((int)(((byte)(224)))), ((int)(((byte)(224)))), ((int)(((byte)(224)))));
        this.button3.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
        this.button3.Location = new System.Drawing.Point(310, 1);
        this.button3.Name = "button3";
        this.button3.Size = new System.Drawing.Size(27, 26);
        this.button3.TabIndex = 2;
        this.button3.Text = "___";
        this.button3.UseVisualStyleBackColor = false;
        this.button3.Click += new System.EventHandler(this.MinClick);
        // 
        // Form1
        // 
        this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
        this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
        this.BackgroundImage = global::BorderExp.Properties.Resources.blank_1_;
        this.ClientSize = new System.Drawing.Size(403, 320);
        this.ControlBox = false;
        this.Controls.Add(this.button3);
        this.Controls.Add(this.button2);
        this.Controls.Add(this.button1);
        this.Name = "Form1";
        this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
        this.Text = "Form1";
        this.Load += new System.EventHandler(this.Form1_Load);
        this.ResumeLayout(false);

    }

    #endregion

    private System.Windows.Forms.Button button1;
    private System.Windows.Forms.Button button2;
    private System.Windows.Forms.Button button3;
    }
   }

the screenshot:- NoBorderForm

You could use GNU Awk, see this article of the user guide. As an improvement to the solution presented in the article (in June 2015), the following gawk command allows double quotes inside double quoted fields; a double quote is marked by two consecutive double quotes ("") there. Furthermore, this allows empty fields, but even this can not handle multiline fields. The following example prints the 3rd column (via c=3) of textfile.csv:

#!/bin/bash
gawk -- '
BEGIN{
    FPAT="([^,\"]*)|(\"((\"\")*[^\"]*)*\")"
}
{
    if (substr($c, 1, 1) == "\"") {
        $c = substr($c, 2, length($c) - 2) # Get the text within the two quotes
        gsub("\"\"", "\"", $c)  # Normalize double quotes
    }
    print $c
}
' c=3 < <(dos2unix <textfile.csv)

Note the use of dos2unix to convert possible DOS style line breaks (CRLF i.e. "\r\n") and UTF-16 encoding (with byte order mark) to "\n" and UTF-8 (without byte order mark), respectively. Standard CSV files use CRLF as line break, see Wikipedia.

If the input may contain multiline fields, you can use the following script. Note the use of special string for separating records in output (since the default separator newline could occur within a record). Again, the following example prints the 3rd column (via c=3) of textfile.csv:

#!/bin/bash
gawk -- '
BEGIN{
    RS="\0" # Read the whole input file as one record;
    # assume there is no null character in input.
    FS="" # Suppose this setting eases internal splitting work.
    ORS="\n####\n" # Use a special output separator to show borders of a record.
}
{
    nof=patsplit($0, a, /([^,"\n]*)|("(("")*[^"]*)*")/, seps)
    field=0;
    for (i=1; i<=nof; i++){
        field++
        if (field==c) {
            if (substr(a[i], 1, 1) == "\"") {
                a[i] = substr(a[i], 2, length(a[i]) - 2) # Get the text within 
                # the two quotes.
                gsub(/""/, "\"", a[i])  # Normalize double quotes.
            }
            print a[i]
        }
        if (seps[i]!=",") field=0
    }
}
' c=3 < <(dos2unix <textfile.csv)

There is another approach to the problem. csvquote can output contents of a CSV file modified so that special characters within field are transformed so that usual Unix text processing tools can be used to select certain column. For example the following code outputs the third column:

csvquote textfile.csv | cut -d ',' -f 3 | csvquote -u

csvquote can be used to process arbitrary large files.

Well, I read somewhere that if your database user has the DDL privileges then it's a schema, else it's a user.

Here is a generic solution using plpgsql:

CREATE OR REPLACE FUNCTION create_role_if_not_exists(rolename NAME) RETURNS TEXT AS
$$
BEGIN
    IF NOT EXISTS (SELECT * FROM pg_roles WHERE rolname = rolename) THEN
        EXECUTE format('CREATE ROLE %I', rolename);
        RETURN 'CREATE ROLE';
    ELSE
        RETURN format('ROLE ''%I'' ALREADY EXISTS', rolename);
    END IF;
END;
$$
LANGUAGE plpgsql;

Usage:

posgres=# SELECT create_role_if_not_exists('ri');
 create_role_if_not_exists 
---------------------------
 CREATE ROLE
(1 row)
posgres=# SELECT create_role_if_not_exists('ri');
 create_role_if_not_exists 
---------------------------
 ROLE 'ri' ALREADY EXISTS
(1 row)

Getting File Extension from File Name

/**
 * The extension separator character.
 */
private static final char EXTENSION_SEPARATOR = '.';

/**
 * The Unix separator character.
 */
private static final char UNIX_SEPARATOR = '/';

/**
 * The Windows separator character.
 */
private static final char WINDOWS_SEPARATOR = '\\';

/**
 * The system separator character.
 */
private static final char SYSTEM_SEPARATOR = File.separatorChar;

/**
 * Gets the extension of a filename.
 * <p>
 * This method returns the textual part of the filename after the last dot.
 * There must be no directory separator after the dot.
 * <pre>
 * foo.txt      --> "txt"
 * a/b/c.jpg    --> "jpg"
 * a/b.txt/c    --> ""
 * a/b/c        --> ""
 * </pre>
 * <p>
 * The output will be the same irrespective of the machine that the code is running on.
 *
 * @param filename the filename to retrieve the extension of.
 * @return the extension of the file or an empty string if none exists.
 */
public static String getExtension(String filename) {
    if (filename == null) {
        return null;
    }
    int index = indexOfExtension(filename);
    if (index == -1) {
        return "";
    } else {
        return filename.substring(index + 1);
    }
}

/**
 * Returns the index of the last extension separator character, which is a dot.
 * <p>
 * This method also checks that there is no directory separator after the last dot.
 * To do this it uses {@link #indexOfLastSeparator(String)} which will
 * handle a file in either Unix or Windows format.
 * <p>
 * The output will be the same irrespective of the machine that the code is running on.
 *
 * @param filename  the filename to find the last path separator in, null returns -1
 * @return the index of the last separator character, or -1 if there
 * is no such character
 */
public static int indexOfExtension(String filename) {
    if (filename == null) {
        return -1;
    }
    int extensionPos = filename.lastIndexOf(EXTENSION_SEPARATOR);
    int lastSeparator = indexOfLastSeparator(filename);
    return (lastSeparator > extensionPos ? -1 : extensionPos);
}

/**
 * Returns the index of the last directory separator character.
 * <p>
 * This method will handle a file in either Unix or Windows format.
 * The position of the last forward or backslash is returned.
 * <p>
 * The output will be the same irrespective of the machine that the code is running on.
 *
 * @param filename  the filename to find the last path separator in, null returns -1
 * @return the index of the last separator character, or -1 if there
 * is no such character
 */
public static int indexOfLastSeparator(String filename) {
    if (filename == null) {
        return -1;
    }
    int lastUnixPos = filename.lastIndexOf(UNIX_SEPARATOR);
    int lastWindowsPos = filename.lastIndexOf(WINDOWS_SEPARATOR);
    return Math.max(lastUnixPos, lastWindowsPos);
}

Credits

1. Copied from Apache FileNameUtils Class - http://grepcode.com/file/repo1.maven.org/maven2/commons-io/commons-io/1.3.2/org/apache/commons/io/FilenameUtils.java#FilenameUtils.getExtension%28java.lang.String%29

You may try to define the following variable:

CWD="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)"

Or you can try the following function in Bash:

realpath () {
  [[ $1 = /* ]] && echo "$1" || echo "$PWD/${1#./}"
}

^{This function takes one argument. If the argument already has an absolute path, print it as it is, otherwise print $PWD variable + filename argument (without ./ prefix).}

Related:

• Bash script absolute path with OS X

• Get the source directory of a Bash script from within the script itself

Another way to do it in Postgres would be to use the idx function.

SELECT *
FROM comments
ORDER BY idx(array[1,3,2,4], comments.id)

Don't forget to create the idx function first, as described here: http://wiki.postgresql.org/wiki/Array_Index

You'll never know for sure if a string is URL-encoded or if it was supposed to have the sequence %2B in it. Instead, it probably depends on where the string came from, i.e. if it was hand-crafted or from some application.

Is it better to search the string for characters which would be encoded, which aren't, and if any exist then its not encoded.

I think this is a better approach, since it would take care of things that have been done programmatically (assuming the application would not have left a non-encoded character behind).

One thing that will be confusing here... Technically, the % "should be" encoded if it will be present in the final value, since it is a special character. You might have to combine your approaches to look for should-be-encoded characters as well as validating that the string decodes successfully if none are found.

You will need to use any javascript html calendar widget.

try this calendar view widget, just copy-paste some code shown in example there and thats it what you want.

Here is the link to Jquery Mobile date box - JQM datebox

It's better to use store.remove than model.destroy. Click handler for that button may looks like this:

destroy: function(button) {
    var grid = button.up('grid');
    var store = grid.getStore();
    var selected = grid.getSelectionModel().getSelection();

    if (selected && selected.length==1) {
        store.remove(selected);
    }
}

//How to solve BigDecimal & BigInteger and return a String.

  BigDecimal x = new BigDecimal( a );
  BigDecimal y = new BigDecimal( b ); 
  BigDecimal result = BigDecimal.ZERO;
  BigDecimal result = x.add(y);
  return String.valueOf(result); 

declare @MyNumber float 
set @MyNumber = 123.45 
select 'My number is ' + CAST(@MyNumber as nvarchar(max))

time difference between now and 10 minutes later using momentjs

let start_time = moment().format('YYYY-MM-DD HH:mm:ss');
let next_time = moment().add(10, 'm').format('YYYY-MM-DD HH:mm:ss');

let diff_milliseconds = Date.parse(next_time) - Date.parse(star_time);
let diff_seconds = diff_milliseconds * 1000;

JavaSun recomendation is to use a shared variable as a flag which asks the background thread to stop. This variable can then be set by a different object requesting the thread to terminate.

You can that way kill the other process, and the current one afterwards.

var text = '<p>name</p><p><span style="font-size:xx-small;">ajde</span></p><p><em>da</em></p>';
var decoded = $('<textarea/>').html(text).text();
alert(decoded);

This sets the innerHTML of a new element (not appended to the page), causing jQuery to decode it into HTML, which is then pulled back out with .text().

Live demo.

if (!json[0]) alert("JSON empty");

Please NOTE that this procedure of adding the reporting services described by @Rich Shealer above will be iterated every time you start a different project. In order to avoid that:

1. If you may need to set up a different computer (eg, at home without internet), then keep your downloaded installers from the marketplace somewhere safe, ie:

   • Microsoft.DataTools.ReportingServices.vsix, and
   • Microsoft.RdlcDesigner.vsix

2. Fetch the following libraries from the packages or bin folder of the application you have created with reporting services in it:

   • Microsoft.ReportViewer.Common.dll
   • Microsoft.ReportViewer.DataVisualization.dll
   • Microsoft.ReportViewer.Design.dll
   • Microsoft.ReportViewer.ProcessingObjectModel.dll
   • Microsoft.ReportViewer.WinForms.dll

3. Install the 2 components from 1 above

4. Add the dlls from 2 above as references (Project>References>Add...)
5. (Optional) Add Reporting tab to the toolbar
6. Add Items to Reporting tab
7. Browse to the bin folder or where you have the above dlls and add them

You are now good to go! ReportViewer icon will be added to your toolbar, and you will also now find Report and ReportWizard templates added to your Common list of templates when you want to add a New Item... (Report) to your project

NB: When set up using Nuget package manager, the Report and ReportWizard templates are grouped under Reporting. Using my method described above however does not add the Reporting grouping in installed templates, but I dont think it is any trouble given that it enables you to quickly integrate rdlc without internet and without downloading what you already have from Nuget every time!

I have got a much simpler answer to your question, run the following two commands

sudo docker run -t -d ubuntu --name mycontainername /bin/bash
sudo docker ps -a

the above ps -a command returns a list of all containers. Take the name of the container which references the image name - 'ubuntu' . docker auto generates names for the containers for example - 'lightlyxuyzx', that's if you don't use the --name option.

The -t and -d options are important, the created container is detached and can be reattached as given below with the -t option.

With --name option, you can name your container in my case 'mycontainername'.

sudo docker exec -ti mycontainername bash

and this above command helps you login to the container with bash shell. From this point on any changes you make in the container is automatically saved by docker. For example - apt-get install curl inside the container You can exit the container without any issues, docker auto saves the changes.

On the next usage, All you have to do is, run these two commands every time you want to work with this container.

This Below command will start the stopped container:

sudo docker start mycontainername

sudo docker exec -ti mycontainername bash

Another example with ports and a shared space given below:

docker run -t -d --name mycontainername -p 5000:5000 -v ~/PROJECTS/SPACE:/PROJECTSPACE 7efe2989e877 /bin/bash

In my case: 7efe2989e877 - is the imageid of a previous container running which I obtained using

docker ps -a

Please take a look at this example here. It is a simple example of a count up! Which I think you could easily modify to create a count down.

http://jsfiddle.net/ganarajpr/LQGE2/

JavaScript code:

function AlbumCtrl($scope,$timeout) {
    $scope.counter = 0;
    $scope.onTimeout = function(){
        $scope.counter++;
        mytimeout = $timeout($scope.onTimeout,1000);
    }
    var mytimeout = $timeout($scope.onTimeout,1000);

    $scope.stop = function(){
        $timeout.cancel(mytimeout);
    }
}

HTML markup:

<!doctype html>
<html ng-app>
<head>
    <script src="http://code.angularjs.org/angular-1.0.0rc11.min.js"></script>
    <script src="http://documentcloud.github.com/underscore/underscore-min.js"></script>
</head>
<body>
<div ng-controller="AlbumCtrl">
    {{counter}}
    <button ng-click="stop()">Stop</button>    
</div>
</body>
</html>

File manipulation isn't normally done by Bash, but by programs invoked by Bash, e.g.:

perl -pi -e 's/abc/XYZ/g' /tmp/file.txt

The -i flag tells it to do an in-place replacement.

See man perlrun for more details, including how to take a backup of the original file.

Just wanted to focus on the last part of the question; How source map files are created? by listing the build tools I know that can create source maps.

1. Grunt: using plugin grunt-contrib-uglify
2. Gulp: using plugin gulp-uglify
3. Google closure: using parameter --create_source_map

The basic syntax for using ternary operator is like this:

(condition) ? (if_true) : (if_false)

For you case it is like this:

number < 0 ? bigInt.sign = 0 : bigInt.sign = 1;

I just want to edit this for posterity that the tags for oracle weren't added when I answered this question. My response was more applicable to MS SQL.

Merge join is the best possible as it exploits the ordering, resulting in a single pass down the tables to do the join. IF you have two tables (or covering indexes) that have their ordering the same such as a primary key and an index of a table on that key then a merge join would result if you performed that action.

Hash join is the next best, as it's usually done when one table has a small number (relatively) of items, its effectively creating a temp table with hashes for each row which is then searched continuously to create the join.

Worst case is nested loop which is order (n * m) which means there is no ordering or size to exploit and the join is simply, for each row in table x, search table y for joins to do.

Use the first example. If the key doesn't exist it will be added.

var a = new Array();
a['name'] = 'oscar';
alert(a['name']);

Will pop up a message box containing 'oscar'.

Try:

var text = 'name = oscar'
var dict = new Array()
var keyValuePair = text.replace(/ /g,'').split('=');
dict[ keyValuePair[0] ] = keyValuePair[1];
alert( dict[keyValuePair[0]] );

Use 10.0.2.2 to access your actual machine.

As you've learned, when you use the emulator, localhost (127.0.0.1) refers to the device's own loopback service, not the one on your machine as you may expect.

You can use 10.0.2.2 to access your actual machine, it is an alias set up to help in development.

number = 20.5

if (number == Math.floor(number)) {

alert("Integer")

} else {

alert("Decimal")

}

Pretty cool and works for things like XX.0 too! It works because Math.floor() chops off any decimal if it has one so if the floor is different from the original number we know it is a decimal! And no string conversions :)

FYI: If you are setting the value, and not seeing anything - you might check to see if you have a 'CustomFormat' set - I just hit this and it was set to ' ' for the 1/1/1900 value (our 'not set' value) and set to MM/dd/yyyy if not.

For me when I created a file and saved it as python file, I was getting this error during importing. I had to create a filename with the type ".py" , like filename.py and then save it as a python file. post trying to import the file worked for me.

def start():

Offset = 5

def getMode():
    while True:
        print('Do you wish to encrypt or decrypt a message?')
        mode = input().lower()
        if mode in 'encrypt e decrypt d'.split():
            return mode
        else:
            print('Please be sensible try just the lower case')

def getMessage():
    print('Enter your message wanted to :')
    return input()

def getKey():
    key = 0
    while True:
        print('Enter the key number (1-%s)' % (Offset))
        key = int(input())
        if (key >= 1 and key <= Offset):
            return key

def getTranslatedMessage(mode, message, key):
    if mode[0] == 'd':
        key = -key
    translated = ''

    for symbol in message:
        if symbol.isalpha():
            num = ord(symbol)
            num += key

            if symbol.isupper():
                if num > ord('Z'):
                    num -= 26
                elif num < ord('A'):
                    num += 26
            elif symbol.islower():
                if num > ord('z'):
                    num -= 26
                elif num < ord('a'):
                    num += 26

            translated += chr(num)
        else:
            translated += symbol
    return translated

mode = getMode()
message = getMessage()
key = getKey()

print('Your translated text is:')
print(getTranslatedMessage(mode, message, key))
if op.lower() in {'q', 'quit', 'e', 'exit'}:
    print("Goodbye!")
    return

This is an O(n) solution.

mydict   = {}
cnt, itm = 0, ''
for item in reversed(lst):
     mydict[item] = mydict.get(item, 0) + 1
     if mydict[item] >= cnt :
         cnt, itm = mydict[item], item

print itm

(reversed is used to make sure that it returns the lowest index item)

Clearly HttpContext.Current is not null only if you access it in a thread that handles incoming requests. That's why it works "when i use this code in another class of a page".

It won't work in the scheduling related class because relevant code is not executed on a valid thread, but a background thread, which has no HTTP context associated with.

Overall, don't use Application["Setting"] to store global stuffs, as they are not global as you discovered.

If you need to pass certain information down to business logic layer, pass as arguments to the related methods. Don't let your business logic layer access things like HttpContext or Application["Settings"], as that violates the principles of isolation and decoupling.

Update: Due to the introduction of async/await it is more often that such issues happen, so you might consider the following tip,

In general, you should only call HttpContext.Current in only a few scenarios (within an HTTP module for example). In all other cases, you should use

• Page.Context https://docs.microsoft.com/en-us/dotnet/api/system.web.ui.page.context?view=netframework-4.7.2
• Controller.HttpContext https://docs.microsoft.com/en-us/dotnet/api/system.web.mvc.controller.httpcontext?view=aspnet-mvc-5.2

instead of HttpContext.Current.

Might I suggest in general that instead of asking, "Will X improve my performance?" you use profiling to determine where your program is actually spending its time and then apply optimizations according to where you'll get the most benefit?

And then you can use profiling to assure that your optimizations have actually benefited you, too.

If you type the executable name and a /? switch at the command line, there is typically help information available. Doing so with taskkill /? provides the following, for instance:

TASKKILL [/S system [/U username [/P [password]]]]
         { [/FI filter] [/PID processid | /IM imagename] } [/T] [/F]

Description:
    This tool is used to terminate tasks by process id (PID) or image name.

Parameter List:
    /S    system           Specifies the remote system to connect to.

    /U    [domain\]user    Specifies the user context under which the
                           command should execute.

    /P    [password]       Specifies the password for the given user
                           context. Prompts for input if omitted.

    /FI   filter           Applies a filter to select a set of tasks.
                           Allows "*" to be used. ex. imagename eq acme*

    /PID  processid        Specifies the PID of the process to be terminated.
                           Use TaskList to get the PID.

    /IM   imagename        Specifies the image name of the process
                           to be terminated. Wildcard '*' can be used
                           to specify all tasks or image names.

    /T                     Terminates the specified process and any
                           child processes which were started by it.

    /F                     Specifies to forcefully terminate the process(es).

    /?                     Displays this help message.

Filters:
    Filter Name   Valid Operators           Valid Value(s)
    -----------   ---------------           -------------------------
    STATUS        eq, ne                    RUNNING |
                                            NOT RESPONDING | UNKNOWN
    IMAGENAME     eq, ne                    Image name
    PID           eq, ne, gt, lt, ge, le    PID value
    SESSION       eq, ne, gt, lt, ge, le    Session number.
    CPUTIME       eq, ne, gt, lt, ge, le    CPU time in the format
                                            of hh:mm:ss.
                                            hh - hours,
                                            mm - minutes, ss - seconds
    MEMUSAGE      eq, ne, gt, lt, ge, le    Memory usage in KB
    USERNAME      eq, ne                    User name in [domain\]user
                                            format
    MODULES       eq, ne                    DLL name
    SERVICES      eq, ne                    Service name
    WINDOWTITLE   eq, ne                    Window title

    NOTE
    ----
    1) Wildcard '*' for /IM switch is accepted only when a filter is applied.
    2) Termination of remote processes will always be done forcefully (/F).
    3) "WINDOWTITLE" and "STATUS" filters are not considered when a remote
       machine is specified.

Examples:
    TASKKILL /IM notepad.exe
    TASKKILL /PID 1230 /PID 1241 /PID 1253 /T
    TASKKILL /F /IM cmd.exe /T 
    TASKKILL /F /FI "PID ge 1000" /FI "WINDOWTITLE ne untitle*"
    TASKKILL /F /FI "USERNAME eq NT AUTHORITY\SYSTEM" /IM notepad.exe
    TASKKILL /S system /U domain\username /FI "USERNAME ne NT*" /IM *
    TASKKILL /S system /U username /P password /FI "IMAGENAME eq note*"

You can also find this information, as well as documentation for most of the other command-line utilities, in the Microsoft TechNet Command-Line Reference

INSERT INTO DestinationTable(SupplierName, Country)
SELECT SupplierName, Country FROM SourceTable;

It is not mandatory column names to be same.

To undo a github pull request with commits throughout that you do not want to delete, you have to run a:

git reset --hard --merge <commit hash>

with the commit hash being the commit PRIOR to merging the pull request. This will remove all commits from the pull request without influencing any commits within the history.

A good way to find this is to go to the now closed pull request and finding this field:

Pull Request Image

After you run the git reset, run a:

git push origin --force <branch name>

This should revert the branch back before the pull request WITHOUT affecting any commits in the branch peppered into the commit history between commits from the pull request.

EDIT:

If you were to click the revert button on the pull request, this creates an additional commit on the branch. It DOES NOT uncommit or unmerge. This means that if you were to hit the revert button, you cannot open a new pull request to re-add all of this code.

Also this issue occurres when the response contenttype is not application/json. In my case response contenttype was text/html and i faced this problem. I changed it to application/json then it worked.

I won't quote the entire page but the whole manual on optimisation is available here: http://gcc.gnu.org/onlinedocs/gcc-4.4.3/gcc/Optimize-Options.html#Optimize-Options

From the sounds of it you want at least -O0, the default, and:

-fmudflap -fmudflapth -fmudflapir

For front-ends that support it (C and C++), instrument all risky pointer/array dereferencing operations, some standard library string/heap functions, and some other associated constructs with range/validity tests. Modules so instrumented should be immune to buffer overflows, invalid heap use, and some other classes of C/C++ programming errors. The instrumentation relies on a separate runtime library (libmudflap), which will be linked into a program if -fmudflap is given at link time. Run-time behavior of the instrumented program is controlled by the MUDFLAP_OPTIONS environment variable. See env MUDFLAP_OPTIONS=-help a.out for its options.

This is by far the fastest and simplest solution, especially on big files:

head -n -1 foo.txt > temp.txt ; mv temp.txt foo.txt

if You want to delete the top line use this:

tail -n +2 foo.txt

which means output lines starting at line 2.

Do not use sed for deleting lines from the top or bottom of a file -- it's very very slow if the file is large.

https://docs.python.org/library/os.html

To complement Greg's post, if you're on a posix system, which includes MacOS, Linux, Unix, etc. you can use os.uname() to get a better feel for what kind of system it is.

BigInteger is immutable. The javadocs states that add() "[r]eturns a BigInteger whose value is (this + val)." Therefore, you can't change sum, you need to reassign the result of the add method to sum variable.

sum = sum.add(BigInteger.valueOf(i));

Here's a slightly different approach (I don't think the other answers do this). I'm not sure whether I love it or hate it, but it works!

export function addDaySuffix(day: number) { 
  const suffixes =
      '  stndrdthththththththththththththththththstndrdthththththththst';
    const startIndex = day * 2;

    return `${day}${suffixes.substring(startIndex, startIndex + 2)}`;
  }

To select the first row from a table and to select one row from a table are two different tasks and need a different query. There are many possible ways to do so. Four of them are:

First

select  max(Fname) from MyTbl;

Second

select  min(Fname) from MyTbl;

Third

select  Fname from MyTbl  where rownum = 1;

Fourth

select  max(Fname) from MyTbl where rowid=(select  max(rowid) from MyTbl)

This will add a path to your Python process / instance (i.e. the running executable). The path will not be modified for any other Python processes. Another running Python program will not have its path modified, and if you exit your program and run again the path will not include what you added before. What are you are doing is generally correct.

set.py:

import sys
sys.path.append("/tmp/TEST")

loop.py

import sys
import time
while True:
  print sys.path
  time.sleep(1)

run: python loop.py &

This will run loop.py, connected to your STDOUT, and it will continue to run in the background. You can then run python set.py. Each has a different set of environment variables. Observe that the output from loop.py does not change because set.py does not change loop.py's environment.

A note on importing

Python imports are dynamic, like the rest of the language. There is no static linking going on. The import is an executable line, just like sys.path.append....

I agree with both previous answers. Basically, you want to use what is known as a "lightbox" - http://en.wikipedia.org/wiki/Lightbox_(JavaScript)

It is essentially a div than is created within the DOM of your current window/tab. In addition to the div that contains your dialog, a transparent overlay blocks the user from engaging all underlying elements. This can effectively create a modal dialog (i.e. user MUST make some kind of decision before moving on).

one more suggestion :

unsigned int a = 0xABCDEF23;
a = ((a&(0x0000FFFF)) << 16) | ((a&(0xFFFF0000)) >> 16);
a = ((a&(0x00FF00FF)) << 8) | ((a&(0xFF00FF00)) >>8);
printf("%0x\n",a);

The required property is boolean:

$('form#register').find('input').each(function(){
    if(!$(this).prop('required')){
        console.log("NR");
    } else {
        console.log("IR");
    }
});

Reference: HTMLInputElement

1.2975118E7 is scientific notation.

1.2975118E7 = 1.2975118 * 10^7 = 12975118

Also, Math.round(f) returns an integer. You can't use it to get your desired format x.xx.

You could use String.format.

String s = String.format("%.2f", 1.2975118);
// 1.30

• demo: http://jsfiddle.net/4y8tLgcp/

$('ul.nav.navbar-nav').on('click.bs.dropdown', function(e){
    var $a  = $(e.target), is_a = $a.is('.is_a');
    if($a.hasClass('dropdown-toggle')){   
        $('ul.dropdown-menu', this).toggle(!is_a);
        $a.toggleClass('is_a', !is_a);
    }
}).on('mouseleave', function(){
    $('ul.dropdown-menu',this).hide();
    $('.is_a', this).removeClass('is_a');
});

i have updated it once again to be the smartest and functional as possible. it now close when you hover outside the nav, remaining open while you are inside it. simply perfect.

// array of $ids that you need to select
$ids = array('1', '2', '3', '4', '5', '6', '7', '8');

// create sql part for IN condition by imploding comma after each id
$in = '(' . implode(',', $ids) .')';

// create sql
$sql = 'SELECT * FROM products WHERE catid IN ' . $in;

// see what you get
var_dump($sql);

Update: (a short version and update missing comma)

$ids = array('1','2','3','4');
$sql = 'SELECT * FROM products WHERE catid IN (' . implode(',', $ids) . ')';

Android Studio Version 2.3

You can create a Service without a Main Activity by following a few easy steps. You'll be able to install this app through Android Studio and debug it like a normal app.

First, create a project in Android Studio without an activity. Then create your Service class and add the service to your AndroidManifest.xml

<application android:allowBackup="true"
    android:label="@string/app_name"
    android:icon="@mipmap/ic_launcher"
    android:roundIcon="@mipmap/ic_launcher_round"
    android:supportsRtl="true"
    android:theme="@style/AppTheme">
    <service android:name="com.whatever.myservice.MyService">
        <intent-filter>
            <action android:name="com.whatever.myservice.MyService" />
        </intent-filter>
    </service>
</application>

Now, in the drop down next to the "Run" button(green arrow), go to "edit configurations" and within the "Launch Options" choose "Nothing". This will allow you to install your Service without Android Studio complaining about not having a Main Activity.

Once installed, the service will NOT be running but you will be able to start it with this adb shell command...

am startservice -n com.whatever.myservice/.MyService

Can check it's running with...

ps | grep whatever

I haven't tried yet but you can likely have Android Studio automatically start the service too. This would be done in that "Edit Configurations" menu.

You shouldn't use both ngRoute and UI-router. Here's a sample code for UI-router:

repoApp.config(function($stateProvider, $urlRouterProvider) {_x000D_
  _x000D_
  $stateProvider_x000D_
    .state('state1', {_x000D_
      url: "/state1",_x000D_
      templateUrl: "partials/state1.html",_x000D_
      controller: 'YourCtrl'_x000D_
    })_x000D_
    _x000D_
    .state('state2', {_x000D_
      url: "/state2",_x000D_
      templateUrl: "partials/state2.html",_x000D_
      controller: 'YourOtherCtrl'_x000D_
    });_x000D_
    $urlRouterProvider.otherwise("/state1");_x000D_
});_x000D_
//etc.

You can find a great answer on the difference between these two in this thread: What is the difference between angular-route and angular-ui-router?

You can also consult UI-Router's docs here: https://github.com/angular-ui/ui-router

You can use a file browser with an backup function, for example the ES File Explorer Long tap a item and select create backup

I think this is the clearest way:

require 'open-uri'

File.write 'image.png', open('http://example.com/image.png').read

First of all, there are still browsers out there that don't support those pseudo-elements (ie. :first-child, :last-child), so you have to 'deal' with this issue.

There is a good example how to make that work without using pseudo-elements:

http://www.darowski.com/tracesofinspiration/2010/01/11/this-newbies-first-impressions-of-haml-and-sass/

       -- see the divider pipe example.

I hope that was useful.

JUNE 3, 2020 : WORKING ANSWER-

1. Upload your image to postimage.org
2. Copy Github-Markdown-Url after uploading Image
3. Insert in your ReadMe

Adding in example for solution given earlier. By using socket.io-client https://github.com/socketio/socket.io-client

Client Side:

//client.js
var io = require('socket.io-client');
var socket = io.connect('http://localhost:3000', {reconnect: true});

// Add a connect listener
socket.on('connect', function (socket) {
    console.log('Connected!');
});
socket.emit('CH01', 'me', 'test msg');

Server Side :

//server.js
var app = require('express')();
var http = require('http').Server(app);
var io = require('socket.io')(http);

io.on('connection', function (socket){
   console.log('connection');

  socket.on('CH01', function (from, msg) {
    console.log('MSG', from, ' saying ', msg);
  });

});

http.listen(3000, function () {
  console.log('listening on *:3000');
});

Run :

Open 2 console and run node server.js and node client.js

use this as somethink

"C:/Program Files (x86)/Nox/bin/nox_adb" install -r app.apk

where

"path_to_executable" commands_argument

I you just need an array of chars:

arr = list(str)

If you want to split the str by a particular str:

# str = "temp//temps" will will be ['temp', 'temps']
arr = str.split("//")

This answer from askubuntu is what worked for me. Seems simpler than other options an less error-prone, since it uses package libgtest-dev to get the sources and builds from there: https://askubuntu.com/questions/145887/why-no-library-files-installed-for-google-test?answertab=votes#tab-top

Please refer to that answer, but just as a shortcut I provide the steps here as well:

sudo apt-get install -y libgtest-dev
sudo apt-get install -y cmake
cd /usr/src/gtest
sudo cmake .
sudo make
sudo mv libg* /usr/lib/

After that, I could build my project which depends on gtest with no issues.

As a side note, you also should keep in mind that "escaping" means "using the back-slash as an indicator for special characters". You can put an end of line in a string doing that, for instance:

String foo = "Hello\

There";

You can use small json library

String jsonstring = ....;
JsonValue json = JsonParser.parse(jsonstring);
String jsonIndendedByTwoSpaces = json.toPrettyString("  ");

Without reloading the page or refreshing the dom, history.pushState can do the job.
Add this method in your component or elsewhere to do that:

addParamsToLocation(params) {
  history.pushState(
    {},
    null,
    this.$route.path +
      '?' +
      Object.keys(params)
        .map(key => {
          return (
            encodeURIComponent(key) + '=' + encodeURIComponent(params[key])
          )
        })
        .join('&')
  )
}

So anywhere in your component, call addParamsToLocation({foo: 'bar'}) to push the current location with query params in the window.history stack.

To add query params to current location without pushing a new history entry, use history.replaceState instead.

Tested with Vue 2.6.10 and Nuxt 2.8.1.

Be careful with this method!
Vue Router don't know that url has changed, so it doesn't reflect url after pushState.

Electricity went down and got this error. Solution was to double click your .ppk (Putty Private Key) and enter your password.

Try this example

 String[] formats = new String[] {
   "yyyy-MM-dd",
   "yyyy-MM-dd HH:mm",
   "yyyy-MM-dd HH:mmZ",
   "yyyy-MM-dd HH:mm:ss.SSSZ",
   "yyyy-MM-dd'T'HH:mm:ss.SSSZ",
 };
 for (String format : formats) {
   SimpleDateFormat sdf = new SimpleDateFormat(format, Locale.US);
   System.err.format("%30s %s\n", format, sdf.format(new Date(0)));
   sdf.setTimeZone(TimeZone.getTimeZone("UTC"));
   System.err.format("%30s %s\n", format, sdf.format(new Date(0)));
 }

and read this http://developer.android.com/reference/java/text/SimpleDateFormat.html

Maybe you can use arrow function (ES6+) or the simple old function declaration.

Normal function declaration type (Not ES6+):

<link href="#" onClick={function(event){ func1(event); func2();}}>Trigger here</link>

Anonymous function or arrow function type (ES6+)

<link href="#" onClick={(event) => { func1(event); func2();}}>Trigger here</link>

The second one is the shortest road that I know. Hope it helps you!

Working from your jsFiddle example:

The jsFiddle was fine, but you were missing semi-colons at the end of the event.preventDefault() statements.

This works: Revised jsFiddle

jQuery(document).ready(function() {
    jQuery(".rec1").click(function(event) {
        event.preventDefault();
        jQuery('#rec-box').html(jQuery(this).next().html()); 
    });
    jQuery(".rec2").click(function(event) {
        event.preventDefault();
        jQuery('#rec-box2').html(jQuery(this).next().html()); 
    });
});

I would recommend the first option, where you actually build elements using jQuery. the second approach simply sets the innerHTML property of the element to a string, which happens to be HTML, and is more error prone and less flexible.

**

It is recommended to use the HTML 5 style (PathLocationStrategy) as location strategy in Angular

** Because

1. It produces the clean and SEO Friendly URLs that are easier for users to understand and remember.
2. You can take advantage of the server-side rendering, which will make our application load faster, by rendering the pages in the server first before delivering it the client.

Use Hashlocationstrtegy only if you have to support the older browsers.

Click here to know more

You need to recalculate width and height after first condition. Here is the code of entire script:

$(document).ready(function() {
    $('.story-small img').each(function() {
    var maxWidth = 100; // Max width for the image
    var maxHeight = 100;    // Max height for the image
    var ratio = 0;  // Used for aspect ratio
    var width = $(this).width();    // Current image width
    var height = $(this).height();  // Current image height

    // Check if the current width is larger than the max
    if(width > maxWidth){
        ratio = maxWidth / width;   // get ratio for scaling image
        $(this).css("width", maxWidth); // Set new width
        $(this).css("height", height * ratio);  // Scale height based on ratio
        height = height * ratio;    // Reset height to match scaled image
    }

    var width = $(this).width();    // Current image width
    var height = $(this).height();  // Current image height

    // Check if current height is larger than max
    if(height > maxHeight){
        ratio = maxHeight / height; // get ratio for scaling image
        $(this).css("height", maxHeight);   // Set new height
        $(this).css("width", width * ratio);    // Scale width based on ratio
        width = width * ratio;    // Reset width to match scaled image
    }
});

If you have ERROR 1064 (42000) or ERROR 1046 (3D000): No database selected in Mysql 5.7, you must specify the location of the user table, the location is mysql.table_name Then the code will work.

sudo mysql -u root -p

UPDATE mysql.user SET authentication_string=password('elephant7') WHERE user='root';

Here's a table to help find the required flags for different permission combinations.

    +-----------------------------------------------------------------------------------------------------------------------------------------------------------+
    ¦             ¦ folder only ¦ folder, sub-folders and files ¦ folder and sub-folders ¦ folder and files ¦ sub-folders and files ¦ sub-folders ¦    files    ¦
    ¦-------------+-------------+-------------------------------+------------------------+------------------+-----------------------+-------------+-------------¦
    ¦ Propagation ¦ none        ¦ none                          ¦ none                   ¦ none             ¦ InheritOnly           ¦ InheritOnly ¦ InheritOnly ¦
    ¦ Inheritance ¦ none        ¦ Container|Object              ¦ Container              ¦ Object           ¦ Container|Object      ¦ Container   ¦ Object      ¦
    +-----------------------------------------------------------------------------------------------------------------------------------------------------------+

So, as David said, you'll want

InheritanceFlags.ContainerInherit | InheritanceFlags.ObjectInherit
PropagationFlags.None

I would pick "default" for data type of variable (null for strings/objects, 0 for numbers), but indeed check what code that will consume the object expects. Don't forget there there is sometimes distinction between null/default vs. "not present".

Check out null object pattern - sometimes it is better to pass some special object instead of null (i.e. [] array instead of null for arrays or "" for strings).

Or you can write your own filter using lodash.

app.filter('unique', function() {
    return function (arr, field) {
        return _.uniq(arr, function(a) { return a[field]; });
    };
});

Try:

adb shell ip addr show rmnet0

It will return something like that:

3: rmnet0: <UP,LOWER_UP> mtu 1500 qdisc htb state UNKNOWN qlen 1000
    link/[530]
    inet 172.22.1.100/29 scope global rmnet0
    inet6 fc01:abab:cdcd:efe0:8099:af3f:2af2:8bc/64 scope global dynamic
       valid_lft forever preferred_lft forever
    inet6 fe80::8099:af3f:2af2:8bc/64 scope link
       valid_lft forever preferred_lft forever 

This part is your IPV4 assigned by the operator

inet 172.22.1.100

This part is your IPV6 assigned by the operator

inet6 fc01:abab:cdcd:efe0:8099:af3f:2af2:8bc