The same notation is used for pointing at a single character or the first character of a null-terminated string:

char c = 'Z';
char a[] = "Hello world";

char *ptr1 = &c;
char *ptr2 = a;      // Points to the 'H' of "Hello world"
char *ptr3 = &a[0];  // Also points to the 'H' of "Hello world"
char *ptr4 = &a[6];  // Points to the 'w' of "world"
char *ptr5 = a + 6;  // Also points to the 'w' of "world"

The values in ptr2 and ptr3 are the same; so are the values in ptr4 and ptr5. If you're going to treat some data as a string, it is important to make sure it is null terminated, and that you know how much space there is for you to use. Many problems are caused by not understanding what space is available and not knowing whether the string was properly null terminated.

Note that all the pointers above can be dereferenced as if they were an array:

 *ptr1    == 'Z'
  ptr1[0] == 'Z'

 *ptr2    == 'H'
  ptr2[0] == 'H'
  ptr2[4] == 'o'

 *ptr4    == 'w'
  ptr4[0] == 'w'
  ptr4[4] == 'd'

  ptr5[0] ==   ptr3[6]
*(ptr5+0) == *(ptr3+6)

Late addition to question

What does char (*ptr)[N]; represent?

This is a more complex beastie altogether. It is a pointer to an array of N characters. The type is quite different; the way it is used is quite different; the size of the object pointed to is quite different.

char (*ptr)[12] = &a;

(*ptr)[0] == 'H'
(*ptr)[6] == 'w'

*(*ptr + 6) == 'w'

Note that ptr + 1 points to undefined territory, but points 'one array of 12 bytes' beyond the start of a. Given a slightly different scenario:

char b[3][12] = { "Hello world", "Farewell", "Au revoir" };

char (*pb)[12] = &b[0];

Now:

(*(pb+0))[0] == 'H'
(*(pb+1))[0] == 'F'
(*(pb+2))[5] == 'v'

You probably won't come across pointers to arrays except by accident for quite some time; I've used them a few times in the last 25 years, but so few that I can count the occasions on the fingers of one hand (and several of those have been answering questions on Stack Overflow). Beyond knowing that they exist, that they are the result of taking the address of an array, and that you probably didn't want it, you don't really need to know more about pointers to arrays.

TL;DR: rails g scaffold_controller <name>

Even though you already have a model, you can still generate the necessary controller and migration files by using the rails generate option. If you run rails generate -h you can see all of the options available to you.

Rails:
  controller
  generator
  helper
  integration_test
  mailer
  migration
  model
  observer
  performance_test
  plugin
  resource
  scaffold
  scaffold_controller
  session_migration
  stylesheets

If you'd like to generate a controller scaffold for your model, see scaffold_controller. Just for clarity, here's the description on that:

Stubs out a scaffolded controller and its views. Pass the model name, either CamelCased or under_scored, and a list of views as arguments. The controller name is retrieved as a pluralized version of the model name.

To create a controller within a module, specify the model name as a path like 'parent_module/controller_name'.

This generates a controller class in app/controllers and invokes helper, template engine and test framework generators.

To create your resource, you'd use the resource generator, and to create a migration, you can also see the migration generator (see, there's a pattern to all of this madness). These provide options to create the missing files to build a resource. Alternatively you can just run rails generate scaffold with the --skip option to skip any files which exist :)

I recommend spending some time looking at the options inside of the generators. They're something I don't feel are documented extremely well in books and such, but they're very handy.

You haven't posted the findvertex method, but Access Reading Violation with an offset like 0x00000048 means that the Vertex* f; in your getCost function is receiving null, and when trying to access the member adj in the null Vertex pointer (that is, in f), it is offsetting to adj (in this case, 72 bytes ( 0x48 bytes in decimal )), it's reading near the 0 or null memory address.

Doing a read like this violates Operating-System protected memory, and more importantly means whatever you're pointing at isn't a valid pointer. Make sure findvertex isn't returning null, or do a comparisong for null on f before using it to keep yourself sane (or use an assert):

assert( f != null ); // A good sanity check

EDIT:

If you have a map for doing something like a find, you can just use the map's find method to make sure the vertex exists:

Vertex* Graph::findvertex(string s)
{
    vmap::iterator itr = map1.find( s );
    if ( itr == map1.end() )
    {
        return NULL;
    }
    return itr->second;
}

Just make sure you're still careful to handle the error case where it does return NULL. Otherwise, you'll keep getting this access violation.

The second option really isn't the same as the others - if the string is "///foo" it will become "foo" instead of "//foo".

The first option needs a bit more work to understand than the third - I would view the Substring option as the most common and readable.

(Obviously each of them as an individual statement won't do anything useful - you'll need to assign the result to a variable, possibly data itself.)

I wouldn't take performance into consideration here unless it was actually becoming a problem for you - in which case the only way you'd know would be to have test cases, and then it's easy to just run those test cases for each option and compare the results. I'd expect Substring to probably be the fastest here, simply because Substring always ends up creating a string from a single chunk of the original input, whereas Remove has to at least potentially glue together a start chunk and an end chunk.

> itself is very wonderful arrow! Just prepend a div with it and style it.

div{_x000D_
  font-size:50px;_x000D_
}_x000D_
div::before{_x000D_
  content:">";_x000D_
  font: 50px 'Consolas';_x000D_
  font-weight:900;_x000D_
}

<div class="arrowed">Hatz!</div>

>>> class name(object):
...     def __init__(self, name):
...         self.name = name
... 
>>> person1 = name("jean")
>>> person2 = name("dean")
>>> person1.name
'jean'
>>> person2.name
'dean'
>>>

Have a look at ImmutableMap JavaDoc: doc

There is information about that there:

Unlike Collections.unmodifiableMap(java.util.Map), which is a view of a separate map which can still change, an instance of ImmutableMap contains its own data and will never change. ImmutableMap is convenient for public static final maps ("constant maps") and also lets you easily make a "defensive copy" of a map provided to your class by a caller.

Here is a CSV action result I wrote that takes a DataTable and converts it into CSV. You can return this from your view and it will prompt the user to download the file. You should be able to convert this easily into a List compatible form or even just put your list into a DataTable.

using System;
using System.Text;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.Mvc;
using System.Data;

namespace Detectent.Analyze.ActionResults
{
    public class CSVResult : ActionResult
    {
        /// <summary>
        /// Converts the columns and rows from a data table into an Microsoft Excel compatible CSV file.
        /// </summary>
        /// <param name="dataTable"></param>
        /// <param name="fileName">The full file name including the extension.</param>
        public CSVResult(DataTable dataTable, string fileName)
        {
            Table = dataTable;
            FileName = fileName;
        }

        public string FileName { get; protected set; }
        public DataTable Table { get; protected set; }




        public override void ExecuteResult(ControllerContext context)
        {
            StringBuilder csv = new StringBuilder(10 * Table.Rows.Count * Table.Columns.Count);

            for (int c = 0; c < Table.Columns.Count; c++)
            {
                if (c > 0)
                    csv.Append(",");
                DataColumn dc = Table.Columns[c];
                string columnTitleCleaned = CleanCSVString(dc.ColumnName);
                csv.Append(columnTitleCleaned);
            }
            csv.Append(Environment.NewLine);
            foreach (DataRow dr in Table.Rows)
            {
                StringBuilder csvRow = new StringBuilder();
                for(int c = 0; c < Table.Columns.Count; c++)
                {
                    if(c != 0)
                        csvRow.Append(",");

                    object columnValue = dr[c];
                    if (columnValue == null)
                        csvRow.Append("");
                    else
                    {
                        string columnStringValue = columnValue.ToString();


                        string cleanedColumnValue = CleanCSVString(columnStringValue);

                        if (columnValue.GetType() == typeof(string) && !columnStringValue.Contains(","))
                        {
                            cleanedColumnValue = "=" + cleanedColumnValue; // Prevents a number stored in a string from being shown as 8888E+24 in Excel. Example use is the AccountNum field in CI that looks like a number but is really a string.
                        }
                        csvRow.Append(cleanedColumnValue);
                    }
                }
                csv.AppendLine(csvRow.ToString());
            }

            HttpResponseBase response = context.HttpContext.Response;
            response.ContentType = "text/csv";
            response.AppendHeader("Content-Disposition", "attachment;filename=" + this.FileName);
            response.Write(csv.ToString());
        }

        protected string CleanCSVString(string input)
        {
            string output = "\"" + input.Replace("\"", "\"\"").Replace("\r\n", " ").Replace("\r", " ").Replace("\n", "") + "\"";
            return output;
        }
    }
}

If you use numpy, this is easy:

slice = arr[:2,:2]

or if you want the 0's,

slice = arr[0:2,0:2]

You'll get the same result.

*note that slice is actually the name of a builtin-type. Generally, I would advise giving your object a different "name".

Another way, if you're working with lists of lists*:

slice = [arr[i][0:2] for i in range(0,2)]

(Note that the 0's here are unnecessary: [arr[i][:2] for i in range(2)] would also work.).

What I did here is that I take each desired row 1 at a time (arr[i]). I then slice the columns I want out of that row and add it to the list that I'm building.

If you naively try: arr[0:2] You get the first 2 rows which if you then slice again arr[0:2][0:2], you're just slicing the first two rows over again.

*This actually works for numpy arrays too, but it will be slow compared to the "native" solution I posted above.

If your data is already serialized:

a) send a JSON response

public function someAction()
{
    $response = new Response();
    $response->setContent(file_get_contents('path/to/file'));
    $response->headers->set('Content-Type', 'application/json');
    return $response;
}

b) send a JSONP response (with callback)

public function someAction()
{
    $response = new Response();
    $response->setContent('/**/FUNCTION_CALLBACK_NAME(' . file_get_contents('path/to/file') . ');');
    $response->headers->set('Content-Type', 'text/javascript');
    return $response;
}

If your data needs be serialized:

c) send a JSON response

public function someAction()
{
    $response = new JsonResponse();
    $response->setData([some array]);
    return $response;
}

d) send a JSONP response (with callback)

public function someAction()
{
    $response = new JsonResponse();
    $response->setData([some array]);
    $response->setCallback('FUNCTION_CALLBACK_NAME');
    return $response;
}

e) use groups in Symfony 3.x.x

Create groups inside your Entities

<?php

namespace Mindlahus;

use Symfony\Component\Serializer\Annotation\Groups;

/**
 * Some Super Class Name
 *
 * @ORM    able("table_name")
 * @ORM\Entity(repositoryClass="SomeSuperClassNameRepository")
 * @UniqueEntity(
 *  fields={"foo", "boo"},
 *  ignoreNull=false
 * )
 */
class SomeSuperClassName
{
    /**
     * @Groups({"group1", "group2"})
     */
    public $foo;
    /**
     * @Groups({"group1"})
     */
    public $date;

    /**
     * @Groups({"group3"})
     */
    public function getBar() // is* methods are also supported
    {
        return $this->bar;
    }

    // ...
}

Normalize your Doctrine Object inside the logic of your application

<?php

use Symfony\Component\HttpFoundation\Response;
use Symfony\Component\Serializer\Mapping\Factory\ClassMetadataFactory;
// For annotations
use Doctrine\Common\Annotations\AnnotationReader;
use Symfony\Component\Serializer\Mapping\Loader\AnnotationLoader;
use Symfony\Component\Serializer\Serializer;
use Symfony\Component\Serializer\Normalizer\ObjectNormalizer;
use Symfony\Component\Serializer\Encoder\JsonEncoder;

...

$repository = $this->getDoctrine()->getRepository('Mindlahus:SomeSuperClassName');
$SomeSuperObject = $repository->findOneById($id);

$classMetadataFactory = new ClassMetadataFactory(new AnnotationLoader(new AnnotationReader()));
$encoder = new JsonEncoder();
$normalizer = new ObjectNormalizer($classMetadataFactory);
$callback = function ($dateTime) {
    return $dateTime instanceof \DateTime
        ? $dateTime->format('m-d-Y')
        : '';
};
$normalizer->setCallbacks(array('date' => $callback));
$serializer = new Serializer(array($normalizer), array($encoder));
$data = $serializer->normalize($SomeSuperObject, null, array('groups' => array('group1')));

$response = new Response();
$response->setContent($serializer->serialize($data, 'json'));
$response->headers->set('Content-Type', 'application/json');
return $response;

Just:

dt = datetimeObject.strftime(format) # format = your datetime format ex) '%Y %d %m'
dt = datetime.datetime.strptime(dt,format)

So do this:

start_time = challenge.datetime_start.strftime('%Y %d %m %H %M %S')
start_time = datetime.datetime.strptime(start_time,'%Y %d %m %H %M %S')

end_time = challenge.datetime_end.strftime('%Y %d %m %H %M %S')
end_time = datetime.datetime.strptime(end_time,'%Y %d %m %H %M %S')

and then use start_time and end_time

ImageButton can't have text (or, at least, android:text isn't listed in its attributes).

The Trick is:

It looks like you need to use Button (and look at drawableTop or setCompoundDrawablesWithIntrinsicBounds(int,int,int,int)).

new File(absolutePath).getName();

The first benefit of enums, as you have already noticed, is syntax simplicity. But the main point of enums is to provide a well-known set of constants which, by default, form a range and help to perform more comprehensive code analysis through type & value safety checks.

Those attributes of enums help both a programmer and a compiler. For example, let's say you see a function that accepts an integer. What that integer could mean? What kind of values can you pass in? You don't really know right away. But if you see a function that accepts enum, you know very well all possible values you can pass in.

For the compiler, enums help to determine a range of values and unless you assign special values to enum members, they are well ranges from 0 and up. This helps to automatically track down errors in the code through type safety checks and more. For example, compiler may warn you that you don't handle all possible enum values in your switch statement (i.e. when you don't have default case and handle only one out of N enum values). It also warns you when you convert an arbitrary integer into enum because enum's range of values is less than integer's and that in turn may trigger errors in the function that doesn't really accept an integer. Also, generating a jump table for the switch becomes easier when values are from 0 and up.

This is not only true for Java, but for other languages with a strict type-checking as well. C, C++, D, C# are good examples.

You could change your code in this way:

public delegate void CallbackHandler(string str);

public class ServerRequest
{
    public void DoRequest(string request, CallbackHandler callback)
    {
        // do stuff....
        callback("asdf");
    }
}

Lazy notes in comments.

#include <stdio.h>
// for malloc
#include <stdlib.h>

// you need the prototype
char *substring(int i,int j,char *ch);


int main(void /* std compliance */)
{
  int i=0,j=2;
  char s[]="String";
  char *test;
  // s points to the first char, S
  // *s "is" the first char, S
  test=substring(i,j,s); // so s only is ok
  // if test == NULL, failed, give up
  printf("%s",test);
  free(test); // you should free it
  return 0;
}


char *substring(int i,int j,char *ch)
{
  int k=0;
  // avoid calc same things several time
  int n = j-i+1; 
  char *ch1;
  // you can omit casting - and sizeof(char) := 1
  ch1=malloc(n*sizeof(char));
  // if (!ch1) error...; return NULL;

  // any kind of check missing:
  // are i, j ok? 
  // is n > 0... ch[i] is "inside" the string?...
  while(k<n)
    {   
      ch1[k]=ch[i];
      i++;k++;
    }   

  return ch1;
}

To access the first and last elements, try.

var nodes = div.querySelectorAll('[move_id]');
var first = nodes[0];
var last = nodes[nodes.length- 1];

For robustness, add index checks.

Yes, the order of nodes is pre-order depth-first. DOM's document order is defined as,

There is an ordering, document order, defined on all the nodes in the document corresponding to the order in which the first character of the XML representation of each node occurs in the XML representation of the document after expansion of general entities. Thus, the document element node will be the first node. Element nodes occur before their children. Thus, document order orders element nodes in order of the occurrence of their start-tag in the XML (after expansion of entities). The attribute nodes of an element occur after the element and before its children. The relative order of attribute nodes is implementation-dependent.

The key lies in the differences between references and instances and what the reference can promise and what the instance can really do.

ArrayList<A> a = new ArrayList<A>();

Here a is a reference to an instance of a specific type - exactly an array list of As. More explicitly, a is a reference to an array list that will accept As and will produce As. new ArrayList<A>() is an instance of an array list of As, that is, an array list that will accept As and will produce As.

ArrayList<Integer> a = new ArrayList<Number>(); 

Here, a is a reference to exactly an array list of Integers, i.e. exactly an array list that can accept Integers and will produce Integers. It cannot point to an array list of Numbers. That array list of Numbers can not meet all the promises of ArrayList<Integer> a (i.e. an array list of Numbers may produce objects that are not Integers, even though its empty right then).

ArrayList<Number> a = new ArrayList<Integer>(); 

Here, declaration of a says that a will refer to exactly an array list of Numbers, that is, exactly an array list that will accept Numbers and will produce Numbers. It cannot point to an array list of Integers, because the type declaration of a says that a can accept any Number, but that array list of Integers cannot accept just any Number, it can only accept Integers.

ArrayList<? extends Object> a= new ArrayList<Object>();

Here a is a (generic) reference to a family of types rather than a reference to a specific type. It can point to any list that is member of that family. However, the trade-off for this nice flexible reference is that they cannot promise all of the functionality that it could if it were a type-specific reference (e.g. non-generic). In this case, a is a reference to an array list that will produce Objects. But, unlike a type-specific list reference, this a reference cannot accept any Object. (i.e. not every member of the family of types that a can point to can accept any Object, e.g. an array list of Integers can only accept Integers.)

ArrayList<? super Integer> a = new ArrayList<Number>();

Again, a is a reference to a family of types (rather than a single specific type). Since the wildcard uses super, this list reference can accept Integers, but it cannot produce Integers. Said another way, we know that any and every member of the family of types that a can point to can accept an Integer. However, not every member of that family can produce Integers.

PECS - Producer extends, Consumer super - This mnemonic helps you remember that using extends means the generic type can produce the specific type (but cannot accept it). Using super means the generic type can consume (accept) the specific type (but cannot produce it).

ArrayList<ArrayList<?>> a

An array list that holds references to any list that is a member of a family of array lists types.

= new ArrayList<ArrayList<?>>(); // correct

An instance of an array list that holds references to any list that is a member of a family of array lists types.

ArrayList<?> a

An reference to any array list (a member of the family of array list types).

= new ArrayList<?>()

ArrayList<?> refers to any type from a family of array list types, but you can only instantiate a specific type.

See also How can I add to List<? extends Number> data structures?

For kotlin lovers.

fun numberPickerCustom() {
    val d = AlertDialog.Builder(context)
    val inflater = this.layoutInflater
    val dialogView = inflater.inflate(R.layout.number_picker_dialog, null)
    d.setTitle("Title")
    d.setMessage("Message")
    d.setView(dialogView)
    val numberPicker = dialogView.findViewById<NumberPicker>(R.id.dialog_number_picker)
    numberPicker.maxValue = 15
    numberPicker.minValue = 1
    numberPicker.wrapSelectorWheel = false
    numberPicker.setOnValueChangedListener { numberPicker, i, i1 -> println("onValueChange: ") }
    d.setPositiveButton("Done") { dialogInterface, i ->
        println("onClick: " + numberPicker.value)       
        }
    d.setNegativeButton("Cancel") { dialogInterface, i -> }
    val alertDialog = d.create()
    alertDialog.show()
}

and number_picker_dialog.xml

<LinearLayout
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:layout_gravity="center"
    android:gravity="center_horizontal">

    <NumberPicker
        android:id="@+id/dialog_number_picker"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"/>
</LinearLayout>

I'm not sure if you have seen THIS, but Chris Coyier's excellent CSS-Tricks.com posted a link to this a while back and it's a pure CSS solution that accomplishes exactly what you seek.

(Click to View on CodePen)

HTML:

<div class="ellipsis">
    <div>
        <p>
            Call me Ishmael. Some years ago – never mind how long precisely – having
            little or no money in my purse, and nothing particular to interest me on
            shore, I thought I would sail about a little and see the watery part of the
            world. It is a way I have of driving off the spleen, and regulating the
            circulation. Whenever I find myself growing grim about the mouth; whenever it
            is a damp, drizzly November in my soul; whenever I find myself involuntarily
            pausing before coffin warehouses, and bringing up the rear of every funeral I
            meet; and especially whenever my hypos get such an upper hand of me, that it
            requires a strong moral principle to prevent me from deliberately stepping
            into the street, and methodically knocking people's hats off – then, I account
            it high time to get to sea as soon as I can.
        </p>
    </div>
</div>

CSS:

html,body,p {
    margin: 0;
    padding: 0;
    font-family: sans-serif;
}
.ellipsis {
    overflow: hidden;
    height: 200px;
    line-height: 25px;
    margin: 20px;
    border: 5px solid #AAA;
}
.ellipsis:before {
    content: "";
    float: left;
    width: 5px;
    height: 200px;
}
.ellipsis > *:first-child {
    float: right;
    width: 100%;
    margin-left: -5px;
}
.ellipsis:after {
    content: "\02026";
    box-sizing: content-box;
    -webkit-box-sizing: content-box;
    -moz-box-sizing: content-box;
    float: right;
    position: relative;
    top: -25px;
    left: 100%;
    width: 3em;
    margin-left: -3em;
    padding-right: 5px;
    text-align: right;
    background-size: 100% 100%;/* 512x1 image,gradient for IE9. Transparent at 0% -> white at 50% -> white at 100%.*/
    background-image:url(data:image/png;base64,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);
    background: -webkit-gradient(linear,left top,right top,
        from(rgba(255,255,255,0)),to(white),color-stop(50%,white));
        background: -moz-linear-gradient(to right,rgba(255,255,255,0),white 50%,white);
        background: -o-linear-gradient(to right,rgba(255,255,255,0),white 50%,white);
        background: -ms-linear-gradient(to right,rgba(255,255,255,0),white 50%,white);
        background: linear-gradient(to right,rgba(255,255,255,0),white 50%,white);
    }

Of course, being a pure CSS solution means that it's also a pretty complicated one, but it works cleanly and elegantly. I will assume that Javascript is out of the question because this is much easier to achieve (and arguably more degradable) with Javascript.

As an added bonus, there's a downloadable zip file of the complete process (if you want to understand it and all), but also a SASS mixin file so that you can fold it into your process easy-peasy.

Hope this helps!

http://www.mobify.com/blog/multiline-ellipsis-in-pure-css/

Here's my proposition:

for i in range(len(rserver.keys())):
    salt = uuid.uuid4().hex
    print(salt)
    mdp_hash = rserver.get(rserver.keys()[i])
    rserver.set(rserver.keys()[i], hashlib.sha256(salt.encode() + mdp_hash.encode()).hexdigest() + salt)
    rsalt.set(rserver.keys()[i], salt)

I found that <a href="..." target="_top">link</a> works too

One workaround is just to use select without any other clauses.

http://lists.mysql.com/mysql/197901

Also you can use Lodash to direct convert object to array:

_.toArray({0:{a:4},1:{a:6},2:{a:5}})
[{a:4},{a:6},{a:5}]

In your case:

_.toArray(subjects).map((subject, i) => (
    <li className="travelcompany-input" key={i}>
        <span className="input-label">Name: {subject[name]}</span>
    </li>
))}

import java.util.ArrayList;
import java.util.List;
import java.util.Map;
import java.util.TreeMap;
/**
 * Check if Anagram by Prime Number Logic
 * @author Pallav
 *
 */
public class Anagram {
    public static void main(String args[]) {
        System.out.println(isAnagram(args[0].toUpperCase(),
                args[1].toUpperCase()));
    }
/**
 * 
 * @param word : The String 1
 * @param anagram_word : The String 2 with which Anagram to be verified
 * @return true or false based on Anagram
 */
    public static Boolean isAnagram(String word, String anagram_word) {
        //If length is different return false
        if (word.length() != anagram_word.length()) {
            return false;
        }
        char[] words_char = word.toCharArray();//Get the Char Array of First String
        char[] anagram_word_char = anagram_word.toCharArray();//Get the Char Array of Second String
        int words_char_num = 1;//Initialize Multiplication Factor to 1
        int anagram_word_num = 1;//Initialize Multiplication Factor to 1 for String 2
        Map<Character, Integer> wordPrimeMap = wordPrimeMap();//Get the Prime numbers Mapped to each alphabets in English
        for (int i = 0; i < words_char.length; i++) {
            words_char_num *= wordPrimeMap.get(words_char[i]);//get Multiplication value for String 1
        }
        for (int i = 0; i < anagram_word_char.length; i++) {
            anagram_word_num *= wordPrimeMap.get(anagram_word_char[i]);//get Multiplication value for String 2
        }

        return anagram_word_num == words_char_num;
    }
/**
 * Get the Prime numbers Mapped to each alphabets in English
 * @return
 */
    public static Map<Character, Integer> wordPrimeMap() {
        List<Integer> primes = primes(26);
        int k = 65;
        Map<Character, Integer> map = new TreeMap<Character, Integer>();
        for (int i = 0; i < primes.size(); i++) {
            Character character = (char) k;
            map.put(character, primes.get(i));
            k++;
        }
        // System.out.println(map);
        return map;
    }
/**
 * get first N prime Numbers where Number is greater than 2
 * @param N : Number of Prime Numbers
 * @return
 */
    public static List<Integer> primes(Integer N) {
        List<Integer> primes = new ArrayList<Integer>();
        primes.add(2);
        primes.add(3);

        int n = 5;
        int k = 0;
        do {
            boolean is_prime = true;
            for (int i = 2; i <= Math.sqrt(n); i++) {
                if (n % i == 0) {
                    is_prime = false;
                    break;
                }
            }

            if (is_prime == true) {
                primes.add(n);

            }
            n++;
            // System.out.println(k);
        } while (primes.size() < N);

        // }

        return primes;
    }

}

If you used read.table() (or one of it's ilk, e.g. read.csv()) then the easy fix is to change the call to:

read.table(file = "foo.txt", row.names = 1, ....)

where .... are the other arguments you needed/used. The row.names argument takes the column number of the data file from which to take the row names. It need not be the first column. See ?read.table for details/info.

If you already have the data in R and can't be bothered to re-read it, or it came from another route, just set the rownames attribute and remove the first variable from the object (assuming obj is your object)

rownames(obj) <- obj[, 1]  ## set rownames
obj <- obj[, -1]           ## remove the first variable

Dmitry Brin's answer worked for me, with one caveat. In my case, I needed to run a function between the list tags, which requires nested JSX braces. Example JSX below, which worked for me:

{this.props.data().map(function (object, i) { return <li>{JSON.stringify(object)}</li> })}

If you don't use nested JSX braces, for example:

{this.props.data().map(function (object, i) { return <li>JSON.stringify(object)</li>})}

then you get a list of "JSON.stringify(object)" in your HTML output, which probably isn't what you want.

I am using flutter and installed virtual device using the terminal

flutter emulator --launch {avd_name} -v

will print a more detailed output, making it easier for debugging the specific errors

Enabling the virtualization options in BIOS worked in my particular case (VDT)

static variables are specific to a class . Constructors initialize attributes ESPECIALY for an instance.

you can use this module -> https://github.com/jiahut/ng.lodash

this is for lodash so does underscore

If you want to be really fancy, download TCPView from Sysinternals:

TCPView is a Windows program that will show you detailed listings of all TCP and UDP endpoints on your system, including the local and remote addresses and state of TCP connections. On Windows Server 2008, Vista, and XP, TCPView also reports the name of the process that owns the endpoint. TCPView provides a more informative and conveniently presented subset of the Netstat program that ships with Windows.

bool hasErrors =  ViewData.ModelState.Values.Any(x => x.Errors.Count > 1);

or iterate with

    foreach (ModelState state in ViewData.ModelState.Values.Where(x => x.Errors.Count > 0))
    {

    }

no that cannot work(not with real data):

String sql = "INSERT INTO course " +
        "VALUES (course_code, course_desc, course_chair)";
    stmt.executeUpdate(sql);

change it to:

String sql = "INSERT INTO course (course_code, course_desc, course_chair)" +
        "VALUES (?, ?, ?)";

Create a PreparedStatment with that sql and insert the values with index:

PreparedStatement preparedStatement = conn.prepareStatement(sql);
preparedStatement.setString(1, "Test");
preparedStatement.setString(2, "Test2");
preparedStatement.setString(3, "Test3");
preparedStatement.executeUpdate(); 

hi i got the same problem.. add 0.71 to excel cell width value and give that value to the

$objPHPExcel->getActiveSheet()->getColumnDimension('A')->setWidth(10);

eg: A Column width = 3.71 (excel value)

give column width = 4.42

will give the output file with same cell width.

$objPHPExcel->getActiveSheet()->getColumnDimension('A')->setWidth(4.42);

hope this help

Add this below lines in style of the full screen dialog.

<item name="android:windowNoTitle">true</item>
    <item name="android:windowFullscreen">true</item>
    <item name="android:windowIsFloating">false</item>

My favourite has always been gnuplot. It's very extensive, so it might be a bit too complex for your needs though. It is cross-platform and there is a C++ API.

Solution:

public Response Get(string jsonData) {
    var json = JsonConvert.DeserializeObject<modelname>(jsonData);
    var data = StoredProcedure.procedureName(json.Parameter, json.Parameter, json.Parameter, json.Parameter);
    return data;
}

Model:

public class modelname {
    public long parameter{ get; set; }
    public int parameter{ get; set; }
    public int parameter{ get; set; }
    public string parameter{ get; set; }
}

For anyone completely new to Qt Creator like me, you can modify your project's .pro file from within Qt Creator:

Just double-click on "your project name".pro in the Projects window and add the include path at the bottom of the .pro file like I've done.

netstat -ano|grep 443|grep LISTEN

will tell you whether a process is listening on port 443 (you might have to replace LISTEN with a string in your language, though, depending on your system settings).

Considering that XML data comes from a table 'table' and is stored in a column 'field': use the XML methods, extract values with xml.value(), project nodes with xml.nodes(), use CROSS APPLY to join:

SELECT 
    p.value('(./firstName)[1]', 'VARCHAR(8000)') AS firstName,
    p.value('(./lastName)[1]', 'VARCHAR(8000)') AS lastName
FROM table 
    CROSS APPLY field.nodes('/person') t(p)

You can ditch the nodes() and cross apply if each field contains exactly one element 'person'. If the XML is a variable you select FROM @variable.nodes(...) and you don't need the cross apply.

<content>(?:[^\n]*(\n+))+</content>

Use this to obtain only the filename.

Path.GetFileName(files[0]);

Another late answer, but my benchmarking shows that Jetty's implementation of Base64 encoder is pretty fast. Not as fast as MiGBase64 but faster than iHarder Base64.

import org.eclipse.jetty.util.B64Code;

final String decoded = B64Code.decode(encoded, "UTF-8");

I also did some benchmarks:

      library     |    encode    |    decode   
------------------+--------------+-------------
 'MiGBase64'      |  10146001.00 |  6426446.00
 'Jetty B64Code'  |   8846191.00 |  3101361.75
 'iHarder Base64' |   3259590.50 |  2505280.00
 'Commons-Codec'  |    241318.04 |   255179.96

These are runs/sec so higher is better.

Tensorflow 2.x Compatible Answer: Converting mrry's code to Tensorflow 2.x (>= 2.0) for the benefit of the community.

!pip install tensorflow==2.1
import tensorflow as tf

tf.compat.v1.disable_eager_execution()    

t = tf.constant(42.0)
sess = tf.compat.v1.Session()
with sess.as_default():   # or `with sess:` to close on exit
    assert sess is tf.compat.v1.get_default_session()
    assert t.eval() == sess.run(t)

#The most important difference is that you can use sess.run() to fetch the values of many tensors in the same step:

t = tf.constant(42.0)
u = tf.constant(37.0)
tu = tf.multiply(t, u)
ut = tf.multiply(u, t)
with sess.as_default():
   tu.eval()  # runs one step
   ut.eval()  # runs one step
   sess.run([tu, ut])  # evaluates both tensors in a single step

I had the same problem, I used Public DNS instead of Public IP. It resolved now.

XSS will always be there even if you use $_SERVER['HTTP_HOST'], $_SERVER['SERVER_NAME'] OR $_SERVER['PHP_SELF']

to complete of Pit answer and for better perfromance : get all in one query and use NextResult method.

using (var sqlCon = new SqlConnection("Server=127.0.0.1;Database=MyDb;User Id=Me;Password=glop;"))
{
    sqlCon.Open();
    var com = sqlCon.CreateCommand();
    com.CommandText = "select * from BigTable;select @@ROWCOUNT;";
    using (var reader = com.ExecuteReader())
    {
        while(reader.read()){
            //iterate code
        }
        int totalRow = 0 ;
        reader.NextResult(); // 
        if(reader.read()){
            totalRow = (int)reader[0];
        }
    }
    sqlCon.Close();
}

Create a file called global.d.ts e.g /src/@types/global.d.ts then define an interface like:

interface Window {
  myLib: any
}

ref: https://www.typescriptlang.org/docs/handbook/declaration-files/templates/global-d-ts.html

this is what I have done. Check it out, hope it can help.

#!/bin/bash
#
# So something to show.
echo "UNO" >  UNO.txt
echo "DOS" >  DOS.txt
#
# Initialize Pid List
dPidLst=""
#
# Generate background processes
tail -f UNO.txt&
dPidLst="$dPidLst $!"
tail -f DOS.txt&
dPidLst="$dPidLst $!"
#
# Report process IDs
echo PID=$$
echo dPidLst=$dPidLst
#
# Show process on current shell
ps -f
#
# Start killing background processes from list
for dPid in $dPidLst
do
        echo killing $dPid. Process is still there.
        ps | grep $dPid
        kill $dPid
        ps | grep $dPid
        echo Just ran "'"ps"'" command, $dPid must not show again.
done

Then just run it as: ./bgkill.sh with proper permissions of course

root@umsstd22 [P]:~# ./bgkill.sh
PID=23757
dPidLst= 23758 23759
UNO
DOS
UID        PID  PPID  C STIME TTY          TIME CMD
root      3937  3935  0 11:07 pts/5    00:00:00 -bash
root     23757  3937  0 11:55 pts/5    00:00:00 /bin/bash ./bgkill.sh
root     23758 23757  0 11:55 pts/5    00:00:00 tail -f UNO.txt
root     23759 23757  0 11:55 pts/5    00:00:00 tail -f DOS.txt
root     23760 23757  0 11:55 pts/5    00:00:00 ps -f
killing 23758. Process is still there.
23758 pts/5    00:00:00 tail
./bgkill.sh: line 24: 23758 Terminated              tail -f UNO.txt
Just ran 'ps' command, 23758 must not show again.
killing 23759. Process is still there.
23759 pts/5    00:00:00 tail
./bgkill.sh: line 24: 23759 Terminated              tail -f DOS.txt
Just ran 'ps' command, 23759 must not show again.
root@umsstd22 [P]:~# ps -f
UID        PID  PPID  C STIME TTY          TIME CMD
root      3937  3935  0 11:07 pts/5    00:00:00 -bash
root     24200  3937  0 11:56 pts/5    00:00:00 ps -f

Use this, from here:

function insertAtCaret(areaId, text) {_x000D_
  var txtarea = document.getElementById(areaId);_x000D_
  if (!txtarea) {_x000D_
    return;_x000D_
  }_x000D_
_x000D_
  var scrollPos = txtarea.scrollTop;_x000D_
  var strPos = 0;_x000D_
  var br = ((txtarea.selectionStart || txtarea.selectionStart == '0') ?_x000D_
    "ff" : (document.selection ? "ie" : false));_x000D_
  if (br == "ie") {_x000D_
    txtarea.focus();_x000D_
    var range = document.selection.createRange();_x000D_
    range.moveStart('character', -txtarea.value.length);_x000D_
    strPos = range.text.length;_x000D_
  } else if (br == "ff") {_x000D_
    strPos = txtarea.selectionStart;_x000D_
  }_x000D_
_x000D_
  var front = (txtarea.value).substring(0, strPos);_x000D_
  var back = (txtarea.value).substring(strPos, txtarea.value.length);_x000D_
  txtarea.value = front + text + back;_x000D_
  strPos = strPos + text.length;_x000D_
  if (br == "ie") {_x000D_
    txtarea.focus();_x000D_
    var ieRange = document.selection.createRange();_x000D_
    ieRange.moveStart('character', -txtarea.value.length);_x000D_
    ieRange.moveStart('character', strPos);_x000D_
    ieRange.moveEnd('character', 0);_x000D_
    ieRange.select();_x000D_
  } else if (br == "ff") {_x000D_
    txtarea.selectionStart = strPos;_x000D_
    txtarea.selectionEnd = strPos;_x000D_
    txtarea.focus();_x000D_
  }_x000D_
_x000D_
  txtarea.scrollTop = scrollPos;_x000D_
}

<textarea id="textareaid"></textarea>_x000D_
<a href="#" onclick="insertAtCaret('textareaid', 'text to insert');return false;">Click Here to Insert</a>

We have a simple Email pattern matcher now.

Java:

 private static boolean isValidEmail(String email) {
        return !TextUtils.isEmpty(email) && android.util.Patterns.EMAIL_ADDRESS.matcher(email).matches();
    }

Kotlin Function:

 private fun isValidEmail(email: String): Boolean {
        return !TextUtils.isEmpty(email) && Patterns.EMAIL_ADDRESS.matcher(email).matches()
    }

Kotlin Extension:

fun String.isValidEmail() =
    !TextUtils.isEmpty(this) && Patterns.EMAIL_ADDRESS.matcher(this).matches()

Have a look at fabric.transfer.

from fabric import Connection

with Connection(host="hostname", 
                user="admin", 
                connect_kwargs={"key_filename": "/home/myuser/.ssh/private.key"}
               ) as c:
    c.get('/foo/bar/file.txt', '/tmp/')

A modified version of above to make it more dynamic.

Public Function DownloadFileB(ByVal URL As String, ByVal DownloadPath As String, ByRef Username As String, ByRef Password, Optional Overwrite As Boolean = True) As Boolean
    On Error GoTo Failed

    Dim WinHttpReq          As Object: Set WinHttpReq = CreateObject("Microsoft.XMLHTTP")

    WinHttpReq.Open "GET", URL, False, Username, Password
    WinHttpReq.send

    If WinHttpReq.Status = 200 Then
        Dim oStream         As Object: Set oStream = CreateObject("ADODB.Stream")
        oStream.Open
        oStream.Type = 1
        oStream.Write WinHttpReq.responseBody
        oStream.SaveToFile DownloadPath, Abs(CInt(Overwrite)) + 1
        oStream.Close
        DownloadFileB = Len(Dir(DownloadPath)) > 0
        Exit Function
    End If

Failed:
    DownloadFileB = False
End Function

GlazedLists has a very, very good sorted list implementation

^{A sample command that exhibits the symptom: sed 's/./@/' <<<$'\xfc' fails, because byte 0xfc is not a valid UTF-8 char.
Note that, by contrast, GNU sed (Linux, but also installable on macOS) simply passes the invalid byte through, without reporting an error.}

Using the formerly accepted answer is an option if you don't mind losing support for your true locale (if you're on a US system and you never need to deal with foreign characters, that may be fine.)

However, the same effect can be had ad-hoc for a single command only:

LC_ALL=C sed -i "" 's|"iphoneos-cross","llvm-gcc:-O3|"iphoneos-cross","clang:-Os|g' Configure

Note: What matters is an effective LC_CTYPE setting of C, so LC_CTYPE=C sed ... would normally also work, but if LC_ALL happens to be set (to something other than C), it will override individual LC_*-category variables such as LC_CTYPE. Thus, the most robust approach is to set LC_ALL.

However, (effectively) setting LC_CTYPE to C treats strings as if each byte were its own character (no interpretation based on encoding rules is performed), with no regard for the - multibyte-on-demand - UTF-8 encoding that OS X employs by default, where foreign characters have multibyte encodings.

In a nutshell: setting LC_CTYPE to C causes the shell and utilities to only recognize basic English letters as letters (the ones in the 7-bit ASCII range), so that foreign chars. will not be treated as letters, causing, for instance, upper-/lowercase conversions to fail.

Again, this may be fine if you needn't match multibyte-encoded characters such as é, and simply want to pass such characters through.

If this is insufficient and/or you want to understand the cause of the original error (including determining what input bytes caused the problem) and perform encoding conversions on demand, read on below.

The problem is that the input file's encoding does not match the shell's.
More specifically, the input file contains characters encoded in a way that is not valid in UTF-8 (as @Klas Lindbäck stated in a comment) - that's what the sed error message is trying to say by invalid byte sequence.

Most likely, your input file uses a single-byte 8-bit encoding such as ISO-8859-1, frequently used to encode "Western European" languages.

Example:

The accented letter à has Unicode codepoint 0xE0 (224) - the same as in ISO-8859-1. However, due to the nature of UTF-8 encoding, this single codepoint is represented as 2 bytes - 0xC3 0xA0, whereas trying to pass the single byte 0xE0 is invalid under UTF-8.

Here's a demonstration of the problem using the string voilà encoded as ISO-8859-1, with the à represented as one byte (via an ANSI-C-quoted bash string ($'...') that uses \x{e0} to create the byte):

Note that the sed command is effectively a no-op that simply passes the input through, but we need it to provoke the error:

  # -> 'illegal byte sequence': byte 0xE0 is not a valid char.
sed 's/.*/&/' <<<$'voil\x{e0}'

To simply ignore the problem, the above LCTYPE=C approach can be used:

  # No error, bytes are passed through ('á' will render as '?', though).
LC_CTYPE=C sed 's/.*/&/' <<<$'voil\x{e0}'

If you want to determine which parts of the input cause the problem, try the following:

  # Convert bytes in the 8-bit range (high bit set) to hex. representation.
  # -> 'voil\x{e0}'
iconv -f ASCII --byte-subst='\x{%02x}' <<<$'voil\x{e0}'

The output will show you all bytes that have the high bit set (bytes that exceed the 7-bit ASCII range) in hexadecimal form. (Note, however, that that also includes correctly encoded UTF-8 multibyte sequences - a more sophisticated approach would be needed to specifically identify invalid-in-UTF-8 bytes.)

Performing encoding conversions on demand:

Standard utility iconv can be used to convert to (-t) and/or from (-f) encodings; iconv -l lists all supported ones.

Examples:

Convert FROM ISO-8859-1 to the encoding in effect in the shell (based on LC_CTYPE, which is UTF-8-based by default), building on the above example:

  # Converts to UTF-8; output renders correctly as 'voilà'
sed 's/.*/&/' <<<"$(iconv -f ISO-8859-1 <<<$'voil\x{e0}')"

Note that this conversion allows you to properly match foreign characters:

  # Correctly matches 'à' and replaces it with 'ü': -> 'voilü'
sed 's/à/ü/' <<<"$(iconv -f ISO-8859-1 <<<$'voil\x{e0}')"

To convert the input BACK to ISO-8859-1 after processing, simply pipe the result to another iconv command:

sed 's/à/ü/' <<<"$(iconv -f ISO-8859-1 <<<$'voil\x{e0}')" | iconv -t ISO-8859-1

The ContextSwitchDeadlock doesn't necessarily mean your code has an issue, just that there is a potential. If you go to Debug > Exceptions in the menu and expand the Managed Debugging Assistants, you will find ContextSwitchDeadlock is enabled. If you disable this, VS will no longer warn you when items are taking a long time to process. In some cases you may validly have a long-running operation. It's also helpful if you are debugging and have stopped on a line while this is processing - you don't want it to complain before you've had a chance to dig into an issue.

To further clear any confusion about the two approach i.e use of

1. @PostConstruct and
2. init-method="init"

From personal experience, I realized that using (1) only works in a servlet container, while (2) works in any environment, even in desktop applications. So, if you would be using Spring in a standalone application, you would have to use (2) to carry out that "call this method after initialization.

python 3 https://docs.python.org/3.5/howto/sorting.html#the-old-way-using-the-cmp-parameter

from functools import cmp_to_key

def custom_compare(x, y):
    # custom comparsion of x[0], x[1] with y[0], y[1]
    return 0

sorted(entries, key=lambda e: (cmp_to_key(custom_compare)(e[0]), e[1]))

Create black png with lets say 50% transparency. Overlay this on mouseover.

There is a blog post with brief source code sample about how misuse of IEnumerable<T> can dramatically impact LINQ query performance: Entity Framework: IQueryable vs. IEnumerable.

If we dig deeper and look into the sources, we can see that there are obviously different extension methods are perfomed for IEnumerable<T>:

// Type: System.Linq.Enumerable
// Assembly: System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
// Assembly location: C:\Windows\Microsoft.NET\Framework\v4.0.30319\System.Core.dll
public static class Enumerable
{
    public static IEnumerable<TSource> Where<TSource>(
        this IEnumerable<TSource> source, 
        Func<TSource, bool> predicate)
    {
        return (IEnumerable<TSource>) 
            new Enumerable.WhereEnumerableIterator<TSource>(source, predicate);
    }
}

and IQueryable<T>:

// Type: System.Linq.Queryable
// Assembly: System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
// Assembly location: C:\Windows\Microsoft.NET\Framework\v4.0.30319\System.Core.dll
public static class Queryable
{
    public static IQueryable<TSource> Where<TSource>(
        this IQueryable<TSource> source, 
        Expression<Func<TSource, bool>> predicate)
    {
        return source.Provider.CreateQuery<TSource>(
            Expression.Call(
                null, 
                ((MethodInfo) MethodBase.GetCurrentMethod()).MakeGenericMethod(
                    new Type[] { typeof(TSource) }), 
                    new Expression[] 
                        { source.Expression, Expression.Quote(predicate) }));
    }
}

The first one returns enumerable iterator, and the second one creates query through the query provider, specified in IQueryable source.

Coversion from string to double can be achieved by using the 'strtod()' function from the library 'stdlib.h'

#include <iostream>
#include <stdlib.h>
int main () 
{
    std::string data="20.9";
    double value = strtod(data.c_str(), NULL);
    std::cout<<value<<'\n';
    return 0;
}

A memory error means that your program has ran out of memory. This means that your program somehow creates too many objects.

In your example, you have to look for parts of your algorithm that could be consuming a lot of memory. I suspect that your program is given very long strings as inputs. Therefore, s[i:j+1] could be the culprit, since it creates a new list. The first time you use it though, it is not necessary because you don't use the created list. You could try to see if the following helps:

if  j + 1 < a:
    sub_strings.append(s[i:j+1])

To replace the second list creation, you should definitely use a buffer object, as suggested by glglgl.

Also note that since you use if j >= i:, you don't need to start your xrange at 0. You can have:

for i in xrange(0, a):
    for j in xrange(i, a):
        # No need for if j >= i

A more radical alternative would be to try to rework your algorithm so that you don't pre-compute all possible sub-strings. Instead, you could simply compute the substring that are asked.

in place

>>> l = [[0, 1, 'f'], [4, 2, 't'], [9, 4, 'afsd']]
>>> l.sort(key=lambda x: x[2])

not in place using sorted:

>>> sorted(l, key=lambda x: x[2])

In linux, you can use the xdg-open command to open the file with the default browser:

{
    "version": "0.1.0",
    "linux": {
        "command": "xdg-open"
    },
    "isShellCommand": true,
    "showOutput": "never",
    "args": ["${file}"]
}

if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.LOLLIPOP) {
    getWindow().addFlags(WindowManager.LayoutParams.FLAG_DRAWS_SYSTEM_BAR_BACKGROUNDS);
    getWindow().setStatusBarColor(getResources().getColor(R.color.actionbar));
}

Put this code in your Activity's onCreate method. This helped me.

According to @Enno Gröper 's post, I've tried the SSLContext constructor and it works well on my machine. code as below:

import ssl
ctx = ssl.SSLContext(ssl.PROTOCOL_SSLv23)
urllib2.urlopen("https://your-test-server.local", context=ctx)

if you need opener, just added this context like:

opener = urllib2.build_opener(urllib2.HTTPSHandler(context=ctx))

NOTE: all above test environment is python 2.7.12. I use PROTOCOL_SSLv23 here since the doc says so, other protocol might also works but depends on your machine and remote server, please check the doc for detail.

As far as the client certificate approach goes, it would not be terribly difficult to implement while still allowing the users without client certificates in.

If you did in fact create your own self-signed Certification Authority, and issued client certs to each client service, you would have an easy way of authenticating those services.

Depending on the web server you are using, there should be a method to specify client authentication that will accept a client cert, but does not require one. For example, in Tomcat when specifying your https connector, you can set 'clientAuth=want', instead of 'true' or 'false'. You would then make sure to add your self signed CA certificate to your truststore (by default the cacerts file in the JRE you are using, unless you specified another file in your webserver configuration), so the only trusted certificates would be those issued off of your self signed CA.

On the server side, you would only allow access to the services you wish to protect if you are able to retrieve a client certificate from the request (not null), and passes any DN checks if you prefer any extra security. For the users without client certs, they would still be able to access your services, but will simply have no certificates present in the request.

In my opinion this is the most 'secure' way, but it certainly has its learning curve and overhead, so may not necessarily be the best solution for your needs.

As you said..

$Gender  = isset($_POST["gender"]); ' it returns a empty string 

because, you haven't mention method type either use POST or GET, by default it will use GET method. On the other side, you are trying to retrieve your value by using POST method, but in the form you haven't mentioned POST method. Which means miss-match method will result for empty.

Try this code..

<form name="signup_form"  action="./signup.php" onsubmit="return validateForm()"   method="post">
<table> 
  <tr> <td> First Name    </td><td> <input type="text" name="fname" size=10/></td></tr>
  <tr> <td> Last Name     </td><td> <input type="text" name="lname" size=10/></td></tr>
  <tr> <td> Your Email    </td><td> <input type="text" name="email" size=10/></td></tr>
  <tr> <td> Re-type Email </td><td> <input type="text" name="remail"size=10/></td></tr>
  <tr> <td> Password      </td><td> <input type="password" name="paswod" size=10/> </td></tr>
  <tr> <td> Gender        </td><td> <select name="gender">
  <option value="select">                Select </option>    
  <option value="male">   Male   </option>
  <option value="female"> Female </option></select></td></tr> 
  <tr> <td> <input type="submit" value="Sign up" id="signup"/> </td> </tr>
 </table>
 </form>

and on signup page

$Gender  = $_POST["gender"];

i'm sure.. now, you will get the value..

You could just select the time range by doing: df.loc['start_date':'end_date']

please, be sure your connected to a ubuntu server, I Had the same problem but I was connected to other distro, check the AMI value in your details instance, it should be something like

AMI: ubuntu/images/ebs/ubuntu-precise-12.04-amd64-server-20130411.1 

hope it helps

I overwrite my default activity animation. I test it in api 15 that it work smoothly. Here is the solution that I use:

<!-- Base application theme. -->
<style name="AppTheme" parent="Theme.AppCompat.Light.NoActionBar">
    <!-- Customize your theme here. -->
    <item name="colorPrimary">@color/colorPrimary</item>
    <item name="colorPrimaryDark">@color/colorPrimaryDark</item>
    <item name="colorAccent">@color/colorPrimary</item>
    <item name="android:windowAnimationStyle">@style/CustomActivityAnimation</item>

</style>

<style name="CustomActivityAnimation" parent="@android:style/Animation.Activity">
    <item name="android:activityOpenEnterAnimation">@anim/slide_in_right</item>
    <item name="android:activityOpenExitAnimation">@anim/slide_out_left</item>
    <item name="android:activityCloseEnterAnimation">@anim/slide_in_left</item>
    <item name="android:activityCloseExitAnimation">@anim/slide_out_right</item>
</style>

Create anim folder under res folder and then create this four animation files:

slide_in_right.xml

<?xml version="1.0" encoding="utf-8"?>

<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate android:fromXDelta="100%p" android:toXDelta="0"
        android:duration="@android:integer/config_mediumAnimTime"/>
</set>

slide_out_left.xml

<?xml version="1.0" encoding="utf-8"?>
<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate android:fromXDelta="0" android:toXDelta="-100%p"
        android:duration="@android:integer/config_mediumAnimTime"/>
</set>

slide_in_left.xml

<?xml version="1.0" encoding="utf-8"?>

<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate android:fromXDelta="-100%p" android:toXDelta="0"
        android:duration="@android:integer/config_mediumAnimTime"/>
</set>

slide_out_right.xml

<?xml version="1.0" encoding="utf-8"?>

<set xmlns:android="http://schemas.android.com/apk/res/android">
    <translate android:fromXDelta="0" android:toXDelta="100%p"
        android:duration="@android:integer/config_mediumAnimTime"/>
</set>

You can download my sample project.

That's all... :)

Edit: Don't use this solution with FreeMarker 2.3.25 and up, especially not .get(prop). See other answers.

You use the built-in keys function, e.g. this should work:

<#list user?keys as prop>
    ${prop} = ${user.get(prop)}
</#list>  

I think, here, right click is not mentioned, @Jishnu V S.

document.onkeydown = function(e) {
    if(e.keyCode == 123) {
     return false;
    }
    if(e.ctrlKey && e.shiftKey && e.keyCode == 'I'.charCodeAt(0)){
     return false;
    }
    if(e.ctrlKey && e.shiftKey && e.keyCode == 'J'.charCodeAt(0)){
     return false;
    }
    if(e.ctrlKey && e.keyCode == 'U'.charCodeAt(0)){
     return false;
    }

    if(e.ctrlKey && e.shiftKey && e.keyCode == 'C'.charCodeAt(0)){
     return false;
    }      
 }

Both CopyTo() and Clone() make shallow copy. Clone() method makes a clone of the original array. It returns an exact length array.

On the other hand, CopyTo() copies the elements from the original array to the destination array starting at the specified destination array index. Note that, this adds elements to an already existing array.

The following code will contradict the postings saying that CopyTo() makes a deep copy:

public class Test
{
public string s;
}

// Write Main() method and within it call test()

private void test()
{
Test[] array = new Test[1];
array[0] = new Test();
array[0].s = "ORIGINAL";

Test[] copy = new Test[1];
array.CopyTo(copy, 0);

// Next line displays "ORIGINAL"
MessageBox.Show("array[0].s = " + array[0].s);
copy[0].s = "CHANGED";

// Next line displays "CHANGED", showing that
// changing the copy also changes the original.
MessageBox.Show("array[0].s = " + array[0].s);
}

Let me explain it a bit. If the elements of the array are of reference types, then the copy (both for Clone() and CopyTo()) will be made upto the first(top) level. But the lower level doesn't get copied. If we need copy of lower level also, we have to do it explicitly. That's why after Cloning or Copying of reference type elements, each element in the Cloned or Copied array refers to the same memory location as referred by the corresponding element in the original array. This clearly indicates that no separate instance is created for lower level. And if it were so then changing the value of any element in the Copied or Cloned array would not have effect in the corresponding element of the original array.

I think that my explanation is exhaustive but I found no other way to make it understandable.

This is the answer:

numCols = objSheet.UsedRange.Columns.count

Documentation of the UsedRange property

Git clone is the command you're looking for:

git clone [email protected]:username/repo.git

Update: And this is the official guide: https://help.github.com/articles/fork-a-repo

Take a look at: https://help.github.com/

It has really useful content

In eclipse help documentation, we can all icons information as follows. Common path for all eclipse versions except eclipse version:

https://help.eclipse.org/2019-09/index.jsp?nav=%2F1

Well, it generally depends on the shell. For bash, it marks the variable as "exportable" meaning that it will show up in the environment for any child processes you run.

Non-exported variables are only visible from the current process (the shell).

From the bash man page:

export [-fn] [name[=word]] ...
export -p

The supplied names are marked for automatic export to the environment of subsequently executed commands.

If the -f option is given, the names refer to functions. If no names are given, or if the -p option is supplied, a list of all names that are exported in this shell is printed.

The -n option causes the export property to be removed from each name.

If a variable name is followed by =word, the value of the variable is set to word.

export returns an exit status of 0 unless an invalid option is encountered, one of the names is not a valid shell variable name, or -f is supplied with a name that is not a function.

You can also set variables as exportable with the typeset command and automatically mark all future variable creations or modifications as such, with set -a.

Maybe not the answer you're hoping for, but if some part of you code need heavy work on collections (searching, sorting, filtering, transformations, analysis) you may take in consideration to write some classes in Clojure or Scala.

Because of their functional nature, working with collections is what they're best at. I don't have much experience with Scala, but with Clojure you'd probably find a more powerful Linq at your fingertips and once compiled, the classes you'd produce would integrate seamlessy with the rest of the code base.

I highly recommend using Apache Commons (http://commons.apache.org/configuration/). It has the ability to use an XML file as a configuration file. Using an XML structure makes it easy to represent arrays as lists of values rather than specially numbered properties.

I have many sites with this issue & finally found a fix to firefox fonts being thicker than chrome.

You need this line next to your -webkit fix -moz-osx-font-smoothing: grayscale;

body{
    text-rendering: optimizeLegibility;
   -webkit-font-smoothing: subpixel-antialiased;
   -webkit-font-smoothing: antialiased;
   -moz-osx-font-smoothing: grayscale;
}

Be careful, because sometimes strtotime("+1 months") can skip month numbers.

Example:

$today = date("Y-m-d"); // 2012-01-30
$next_month = date("Y-m-d", strtotime("$today +1 month"));

If today is January, next month should be February which has 28 or 29 days, but PHP will return March as next month, not February.

There is one other option in regular expression, the search method

import re

string = 'Happy Birthday'
pattern = 'py'
print(re.search(pattern, string).span()) ## this prints starting and end indices
print(re.search(pattern, string).span()[0]) ## this does what you wanted

By the way, if you would like to find all the occurrence of a pattern, instead of just the first one, you can use finditer method

import re

string = 'i think that that that that student wrote there is not that right'
pattern = 'that'

print([match.start() for match in re.finditer(pattern, string)])

which will print all the starting positions of the matches.

Please close the file if its still open on your computer, then try running the python code. I hope it works

select @EmpID = ID from dbo.Employee

Or

set @EmpID =(select id from dbo.Employee)

Note that the select query might return more than one value or rows. so you can write a select query that must return one row.

If you would like to add more columns to one variable(MS SQL), there is an option to use table defined variable

DECLARE @sampleTable TABLE(column1 type1)
INSERT INTO @sampleTable
SELECT columnsNumberEqualInsampleTable FROM .. WHERE ..

As table type variable do not exist in Oracle and others, you would have to define it:

DECLARE TYPE type_name IS TABLE OF (column_type | variable%TYPE | table.column%TYPE [NOT NULL] INDEX BY BINARY INTEGER;

-- Then to declare a TABLE variable of this type: variable_name type_name;

-- Assigning values to a TABLE variable: variable_name(n).field_name := 'some text';

-- Where 'n' is the index value

Here's a complete working example based on your testing. Compare it to what you have currently to figure out where you are going wrong.

<html> 
  <head> 
    <title>Untitled Document</title> 
    <script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script>
    <script type="text/javascript"> 
      $(document).ready( function() {
        $('#deletesuccess').delay(1000).fadeOut();
      });
    </script>
  </head> 
  <body> 
    <div id=deletesuccess > hiiiiiiiiiii </div> 
  </body> 
</html>

One thing to note about window.orientation is that it will return undefined if you are not on a mobile device. So a good function to check for the orientation might look like this, where x is window.orientation:

//check for orientation
function getOrientation(x){
  if (x===undefined){
    return 'desktop'
  } else {
    var y;
    x < 0 ? y = 'landscape' : y = 'portrait';
    return y;
  }
}

Call it like so:

var o = getOrientation(window.orientation);
window.addEventListener("orientationchange", function() {
  o = getOrientation(window.orientation);
  console.log(o);
}, false);

The only way to get the iOS dictation is to sign up yourself through Nuance: http://dragonmobile.nuancemobiledeveloper.com/ - it's expensive, because it's the best. Presumably, Apple's contract prevents them from exposing an API.

The built in iOS accessibility features allow immobilized users to access dictation (and other keyboard buttons) through tools like VoiceOver and Assistive Touch. It may not be worth reinventing this if your users might be familiar with these tools.

Refer https://docs.python.org/2/tutorial/controlflow.html#unpacking-argument-lists

 dt = datetime.datetime(*t[:7])

Here's my docker-compose based solution:

  cron:
    image: alpine:3.10
    command: crond -f -d 8
    depends_on:
      - servicename
    volumes:
      - './conf/cron:/etc/crontabs/root:z'
    restart: unless-stopped

the lines with cron entries are on the ./conf/cron file.

Note: this won't run commands that aren't on the alpine image.

Select All Occurrences of Find Match editor.action.selectHighlights.

Ctrl+Shift+L

Cmd+Shift+L or Cmd+Ctrl+G on Mac

If you don't want to implement your own wrapper, you can use a queue system, e.g. async.queue, queue.

I'm no Java expert, but I would presume that the .hasNext, .hasNextLine and .hasNextByte all use and increment the same file position indicator. You'll need to reset that, either by creating a new Scanner as Aashray mentioned, or using a RandomAccessFile and calling file.seek(0); after each loop.

If I've understood your problem correctly, there are two possible problems here:

• resultset is null - I assume that this can't be the case as if it was you'd get an exception in your while loop and nothing would be output.
• The second problem is that resultset.getString(i++) will get columns 1,2,3 and so on from each subsequent row.

I think that the second point is probably your problem here.

Lets say you only had 1 row returned, as follows:

Col 1, Col 2, Col 3 
A    ,     B,     C

Your code as it stands would only get A - it wouldn't get the rest of the columns.

I suggest you change your code as follows:

ResultSet resultset = ...;
ArrayList<String> arrayList = new ArrayList<String>(); 
while (resultset.next()) {                      
    int i = 1;
    while(i <= numberOfColumns) {
        arrayList.add(resultset.getString(i++));
    }
    System.out.println(resultset.getString("Col 1"));
    System.out.println(resultset.getString("Col 2"));
    System.out.println(resultset.getString("Col 3"));                    
    System.out.println(resultset.getString("Col n"));
}

Edit:

To get the number of columns:

ResultSetMetaData metadata = resultset.getMetaData();
int numberOfColumns = metadata.getColumnCount();

"Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files 6"

http://www.oracle.com/technetwork/java/javase/downloads/jce-6-download-429243.html

It is probably not the best thing to do. You need to at least check out your PHP error log for things going wrong ;)

# PHP error handling for development servers
php_flag display_startup_errors off
php_flag display_errors off
php_flag html_errors off
php_flag log_errors on
php_flag ignore_repeated_errors off
php_flag ignore_repeated_source off
php_flag report_memleaks on
php_flag track_errors on
php_value docref_root 0
php_value docref_ext 0
php_value error_log /home/path/public_html/domain/PHP_errors.log
php_value error_reporting -1
php_value log_errors_max_len 0

Check your .git/config in the destination project:

$ cat .git/config 
[core]
    repositoryformatversion = 0
    filemode = true
    bare = false
    logallrefupdates = true
[receive]
    denyCurrentBranch = updateInstead

If the core. bare is false, you can set it to true:

$ git config core.bare true

and then in your local push to remote:

git push remote_repo   // suppose the destination repo is remote_repo

it will success, in the remote_repo you can check git version.

$ git log -1
commit 0623b1b900ef7331b9184722a5381bbdd2d935ba
Author: aircraft < [email protected]>
Date:   Thu May 17 21:54:37 2018 +0800

and now you can not use git in your "workspace":

$ git status
fatal: This operation must be run in a work tree

you should set bare.bare back to false.

$ git config core.bare false

hive  --outputformat=csv2 -e "select * from yourtable" > my_file.csv

or

hive  --outputformat=csv2 -e "select * from yourtable" > [your_path]/file_name.csv

For tsv, just change csv to tsv in the above queries and run your queries

There are a couple of potential problems with this approach, though in a lot of circumstances (such as your example) it will work well.

In particular you should be careful when dealing with anything that deals with the GUI that requires a Context. For example, if you pass the application Context into the LayoutInflater you will get an Exception. Generally speaking, your approach is excellent: it's good practice to use an Activity's Context within that Activity, and the Application Context when passing a context beyond the scope of an Activity to avoid memory leaks.

Also, as an alternative to your pattern you can use the shortcut of calling getApplicationContext() on a Context object (such as an Activity) to get the Application Context.

INSERT INTO Test([col1],[col2]) (
    SELECT 
        a.Name AS [col1],
        b.sub AS [col2] 
    FROM IdTable b 
    INNER JOIN Nametable a ON b.no = a.no
)

code:

// Create Directory if not exist then Copy a file.


public static void copyFile_Directory(String origin, String destDir, String destination) throws IOException {

    Path FROM = Paths.get(origin);
    Path TO = Paths.get(destination);
    File directory = new File(String.valueOf(destDir));

    if (!directory.exists()) {
        directory.mkdir();
    }
        //overwrite the destination file if it exists, and copy
        // the file attributes, including the rwx permissions
     CopyOption[] options = new CopyOption[]{
                StandardCopyOption.REPLACE_EXISTING,
                StandardCopyOption.COPY_ATTRIBUTES

        };
        Files.copy(FROM, TO, options);


}

In package.json you will find an eslintConfig line. Your 'rules' line can go in there like this:

  "eslintConfig": {
   ...
    "extends": [
      "eslint:recommended"
    ],
    "rules": {
      "no-console": "off"
    },
   ...
  },

If you want to kill the Sticky Service,the following command NOT WORKING:

adb shell am force-stop <PACKAGE>
adb shell kill <PID>

The following command is WORKING:

adb shell pm disable <PACKAGE>

If you want to restart the app,you must run command below first:

adb shell pm enable <PACKAGE>

I searched for the solution online and found this solution but wasn't too keen on the registry change.

I found a better way: right-click on the solution name right at the top of the Solution Explorer and select the Go Online option. Clicking this allowed me to select the files that had been changed when I was offline and make the solution online again.

After finding the solution, I found the following msdn forum thread which confirmed the above.

My take on this, as a good exercise - vparse, which has a tiny source, with a simple function:

function parseVersion(v) {
    var m = v.match(/\d*\.|\d+/g) || [];
    v = {
        major: +m[0] || 0,
        minor: +m[1] || 0,
        patch: +m[2] || 0,
        build: +m[3] || 0
    };
    v.isEmpty = !v.major && !v.minor && !v.patch && !v.build;
    v.parsed = [v.major, v.minor, v.patch, v.build];
    v.text = v.parsed.join('.');
    return v;
}

For the case that you wish to revert a recently installed package that made several changes to dependencies (such as tensorflow), you can "roll back" to an earlier installation state via the following method:

conda list --revisions
conda install --revision [revision number]

The first command shows previous installation revisions (with dependencies) and the second reverts to whichever revision number you specify.

Note that if you wish to (re)install a later revision, you may have to sequentially reinstall all intermediate versions. If you had been at revision 23, reinstalled revision 20 and wish to return, you may have to run each:

conda install --revision 21
conda install --revision 22
conda install --revision 23

The h helper method:

<%=h "<p> will be preserved" %>

This error also happens if you have got the order of your components wrong.

Example: this wrong:

 <ComponentA> 
    <ComponentB> 

    </ComponentA> 
 </ComponentB> 

correct way:

  <ComponentA> 
    <ComponentB>

    </ComponentB>  
  </ComponentA> 

This is based off of "default locale"'s answer but it will remove invalid column names prior to setting ordinal. This is because if you accidentally send an invalid column name then it would fail and if you put a check to prevent it from failing then the index would be wrong since it would skip indices wherever an invalid column name was passed in.

public static class DataTableExtensions
{
    /// <summary>
    /// SetOrdinal of DataTable columns based on the index of the columnNames array. Removes invalid column names first.
    /// </summary>
    /// <param name="table"></param>
    /// <param name="columnNames"></param>
    /// <remarks> http://stackoverflow.com/questions/3757997/how-to-change-datatable-colums-order</remarks>
    public static void SetColumnsOrder(this DataTable dtbl, params String[] columnNames)
    {
        List<string> listColNames = columnNames.ToList();

        //Remove invalid column names.
        foreach (string colName in columnNames)
        {
            if (!dtbl.Columns.Contains(colName))
            {
                listColNames.Remove(colName);
            }
        }

        foreach (string colName in listColNames)
        {
            dtbl.Columns[colName].SetOrdinal(listColNames.IndexOf(colName));
        }
}

It's useful in situations where you have hidden internal state such as a cache. For example:

class HashTable
{
...
public:
    string lookup(string key) const
    {
        if(key == lastKey)
            return lastValue;

        string value = lookupInternal(key);

        lastKey = key;
        lastValue = value;

        return value;
    }

private:
    mutable string lastKey, lastValue;
};

And then you can have a const HashTable object still use its lookup() method, which modifies the internal cache.

If you open your module settings (F4) you can nominate which paths contain 'source'. Intellij will then mark these directories in blue and allow you to add classes etc.

In a similar fashion you can highlight test directories for unit tests.

I had the same problem...

If your using a interface to decouple your connection against your DbContext (like me) you can use structuremap.mvc (3 or 4 - nudget package) to be able to use a constructure in your controller class. This will give you a DependencyResolution folder. Just change the commented line with your For< InterfaceClass >() and to Use< DbContextClass >().

At times, if we forget the

return self.cleaned_data 

in the clean function of django forms, we will not have any data though the form.is_valid() will return True.

Use:

std::map<std::string, std::string>::const_iterator

instead:

std::map<std::string, std::string>::iterator

Whether to use a datepicker or not I think depends on how long ago the dates are. If they are typically in the current month, and almost never more than a few months old, and you know that Javascript will be around, a datepicker is good. If the dates are not recent (say, a birthdate) I think this is the best option:

http://img411.imageshack.us/img411/6328/mockupg.png

Note that this is different from Patrick McElhaney's answer in that the year is a text box, not a dropdown. Selecting a number from a drop down box that is hundreds of elements long is very annoying for the user.

There are many efficient ways to test primality (and this isn't one of them), but the loop you wrote can be concisely rewritten in Python:

def is_prime(a):
    return all(a % i for i in xrange(2, a))

That is, a is prime if all numbers between 2 and a (not inclusive) give non-zero remainder when divided into a.

PDO is the standard, it's what most developers will expect to use. mysqli was essentially a bespoke solution to a particular problem, but it has all the problems of the other DBMS-specific libraries. PDO is where all the hard work and clever thinking will go.

You can check this solved your problem...

    #headermenu ul{ 
        text-align: center;
    }
    #headermenu li { 
list-style-type: none;
        display: inline-block;
    }
    #headermenu ul li a{
        float: left;
    }

http://jsfiddle.net/thirtydot/VCZgW/

I'm not really sure what you mean, so I'll start simply:

If the file you're trying to "run" is static content, like HTML or even Javascript, you don't need to run it on "localhost"... you should just be able to open it from wherever it is on your machine in your browser.

If it is a piece of server-side code (ASP[.NET], php, whatever else, uou need to be running either a web server, or if you're using Visual Studio, start the development server for your application (F5 to debug, or CTRL+F5 to start without debugging).

If you're using a web server, you'll need to have a web site configured with the home directory set to the directory the file is in (or, just put the file in whatever home directory is configured).

If you're using Visual Studio, the file just needs to be in your project.

That's because your dat1 and dat2 variables are just strings.

You should parse them to get a Date object, for that format I always use the following function:

// parse a date in yyyy-mm-dd format
function parseDate(input) {
  var parts = input.match(/(\d+)/g);
  // new Date(year, month [, date [, hours[, minutes[, seconds[, ms]]]]])
  return new Date(parts[0], parts[1]-1, parts[2]); // months are 0-based
}

I use this function because the Date.parse(string) (or new Date(string)) method is implementation dependent, and the yyyy-MM-dd format will work on modern browser but not on IE, so I prefer doing it manually.

Check my answer here

The use of Layout Inspector tool can be very convenient when you have a complex view or you are using a third party library where you can't add an id to a view

Since you cannot set value="" within your first option, you'll need to create your own rule using the built-in addMethod() method.

jQuery:

$(document).ready(function () {

    $('#myform').validate({ // initialize the plugin
        rules: {
            year: {
                selectcheck: true
            }
        }
    });

    jQuery.validator.addMethod('selectcheck', function (value) {
        return (value != '0');
    }, "year required");

});

HTML:

<select name="year">
    <option value="0">Year</option>
    <option value="1">1955</option>
    <option value="2">1956</option>
</select>

Working Demo: http://jsfiddle.net/tPRNd/

Original Answer: (Only if you can set value="" within the first option)

To properly validate a select element with the jQuery Validate plugin simply requires that the first option contains value="". So remove the 0 from value="0" and it's fixed.

jQuery:

$(document).ready(function () {

    $('#myform').validate({ // initialize the plugin
        rules: {
            year: {
                required: true,
            }
        }
    });

});

HTML:

<select name="year">
    <option value="">Year</option>
    <option value="1">1955</option>
    <option value="2">1956</option>
</select>

Demo: http://jsfiddle.net/XGtEr/

If you call it like this: $ python myfile.py var1 var2 var3

import sys

var1 = sys.argv[1]
var2 = sys.argv[2]
var3 = sys.argv[3]

Similar to arrays you also have sys.argv[0] which is always the current working directory.

All the above options will prompt you to resolve merge conflicts. If you are merging changes committed for a team, it is difficult to get resolved the merge conflicts from developers and proceed. However, "git merge" will do the merge in one shot but you can not pass a range of revisions as argument. we have to use "git diff" and "git apply" commands to do the merge range of revs. I have observed that "git apply" will fail if the patch file has diff for too many file, so we have to create a patch per file and then apply. Note that the script will not be able to delete the files that are deleted in source branch. This is a rare case, you can manually delete such files from target branch. The exit status of "git apply" is not zero if it is not able to apply the patch, however if you use -3way option it will fall back to 3 way merge and you don't have to worry about this failure.

Below is the script.

enter code here



  #!/bin/bash

    # This script will merge the diff between two git revisions to checked out branch
    # Make sure to cd to git source area and checkout the target branch
    # Make sure that checked out branch is clean run "git reset --hard HEAD"


    START=$1
    END=$2

    echo Start version: $START
    echo End version: $END

    mkdir -p ~/temp
    echo > /tmp/status
    #get files
    git --no-pager  diff  --name-only ${START}..${END} > ~/temp/files
    echo > ~/temp/error.log
    # merge every file
    for file in `cat  ~/temp/files`
    do
      git --no-pager diff --binary ${START}..${END} $file > ~/temp/git-diff
      if [ $? -ne 0 ]
      then
#      Diff usually fail if the file got deleted 
        echo Skipping the merge: git diff command failed for $file >> ~/temp/error.log
        echo Skipping the merge: git diff command failed for $file
        echo "STATUS: FAILED $file" >>  /tmp/status
        echo "STATUS: FAILED $file"
    # skip the merge for this file and continue the merge for others
        rm -f ~/temp/git-diff
        continue
      fi

      git apply  --ignore-space-change --ignore-whitespace  --3way --allow-binary-replacement ~/temp/git-diff

      if [ $? -ne 0 ]
       then
#  apply failed, but it will fall back to 3-way merge, you can ignore this failure
         echo "git apply command filed for $file"
       fi
       echo
       STATUS=`git status -s $file`


       if [ ! "$STATUS" ]
       then
#   status is null if the merged diffs are already present in the target file
         echo "STATUS:NOT_MERGED $file"
         echo "STATUS: NOT_MERGED $file$"  >>  /tmp/status
       else
#     3 way merge is successful
         echo STATUS: $STATUS
         echo "STATUS: $STATUS"  >>  /tmp/status
       fi
    done

    echo GIT merge failed for below listed files

    cat ~/temp/error.log

    echo "Git merge status per file is available in /tmp/status"

I don't think it is necessary to "host" the content using the way from the accepted answer. It is too complicated for a normal user with limited developing skills.

Google actually has provided hosting feature without using Drive SDK/API, what you need is just few clicks. Check this out:

http://support.google.com/drive/bin/answer.py?hl=en&answer=2881970

It is the same to the answer of user1557669. However, in step 4, the URL is not correct, it is like:

https://drive.google.com/#folders/...

To get the correct host URL. Right click on the html file (you have to finish 1-3 steps first and put the html in the public shared folder), and select "Details" from the context menu. You will find the hosting URL right close to the bottom of the details panel. It should look like:

https://googledrive.com/host/.../abc.html

Then you can share the link to anyone. Happy sharing.

You are not passing the variable correctly. One fast solution is to make a global variable like this:

var global_json_data;
$(document).ready(function() {
    var json_source = "https://spreadsheets.google.com/feeds/list/0ApL1zT2P00q5dG1wOUMzSlNVV3VRV2pwQ2Fnbmt3M0E/od7/public/basic?alt=json";
    var string_data ="";
    var json_data = $.ajax({
        dataType: 'json', // Return JSON
        url: json_source,
        success: function(data){
            var data_obj = [];
            for (i=0; i<data.feed.entry.length; i++){
                var el = {'key': data.feed.entry[i].title['$t'], 'value': '<p><a href="'+data.feed.entry[i].content['$t']+'>'+data.feed.entry[i].title['$t']+'</a></p>'};
                data_obj.push(el)};

            console.log("data grabbed");  
            global_json_data =   data_obj;

            return data_obj;


        },      

        error: function(jqXHR, textStatus, errorThrown){ 
                        $('#results_box').html('<h2>Something went wrong!</h2><p><b>' + textStatus  + '</b> ' + errorThrown  + '</p>');
        }
    }); 

    $(':submit').click(function(event){
        var json_data = global_json_data;
        event.preventDefault();
        console.log(json_data.length);

        //function
        if ($('#place').val() !=''){
            var copy_string = $('#place').val();
            var converted_string = copy_string;
            for (i=0; i<json_data.length; i++){
                //console_log(data.feed.entry[i].title['$t']);
                converted_string = converted_string.replace(json_data.feed.entry[i].title['$t'], 
                    '<a href="'+json_data.feed.entry[i].content['$t']+'>'+json_data.feed.entry[i].title['$t']+'</a>');
            }  
            $('#results_box').text(converted_string).html();
        }
    });

});//document ready end 

use isinstance(v, type_name) or type(v) is type_name or type(v) == type_name,

where type_name can be one of the following:

• None
• bool
• int
• float
• complex
• str
• list
• tuple
• set
• dict

and, of course,

• custom types (classes)

string[,] myGridData = new string[dataGridView1.Rows.Count,3];

int i = 0;

foreach(DataRow row in dataGridView1.Rows)

{

    myGridData[i][0] = row.Cells[0].Value.ToString();
    myGridData[i][1] = row.Cells[1].Value.ToString();
    myGridData[i][2] = row.Cells[2].Value.ToString();

    i++;
}

Hope this helps....

Just for the forgetting-to-dispose problem, try the solution described in this blog post. Here's the essence:

    public void Dispose ()
    {
        // Dispose logic here ...

        // It's a bad error if someone forgets to call Dispose,
        // so in Debug builds, we put a finalizer in to detect
        // the error. If Dispose is called, we suppress the
        // finalizer.
#if DEBUG
        GC.SuppressFinalize(this);
#endif
    }

#if DEBUG
    ~TimedLock()
    {
        // If this finalizer runs, someone somewhere failed to
        // call Dispose, which means we've failed to leave
        // a monitor!
        System.Diagnostics.Debug.Fail("Undisposed lock");
    }
#endif

You could also just use the bytes where they are, casting them to the type you need.

unsigned char *bytePtr = (unsigned char *)[data bytes];

when you manually open the IP address (via the RUN command or mapping a network drive), your PC will send your credentials over the pipe and the file server will receive authorization from the DC.

When ASP.Net tries, then it is going to try to use the IIS worker user (unless impersonation is turned on which will list a few other issues). Traditionally, the IIS worker user does not have authorization to work across servers (or even in other folders on the web server).

To add space before background image, one could define the 'width' of element which is using 'background-image' object. And then to define a pixel value in 'background-position' property to create space from left side.

For example, I'd a scenario where I got a navigation menu which had a bullet before link item and the bullet graphic were changeable if corrosponding link turns into an active state. Further, the active link also had a background-color to show, and this background-color had approximate 15px padding both on left and right side of link item (so on left, it includes bullet icon of link too).

While padding-right fulfill the purpose to have background-color stretched upto 15px more on right of link text. The padding-left only added to space between link text and bullet.

So I took the width of background-color object from PSD design (for ex. 82px) and added that to li element (in a class created to show active state) and then I set background-position value to 20px. Which resulted in bullet icon shifted inside from the left edge. And its provided me desired output of having left padding before bullet icon used as background image.

Please note, you may need to adjust your padding / margin values accordingly, which may used either for space between link items or for spacing between bullet icon and link text.

I just read up on this question and its answers, and I feel an answer is missing.

A common way to eliminate branch prediction that I've found to work particularly good in managed languages is a table lookup instead of using a branch (although I haven't tested it in this case).

This approach works in general if:

1. it's a small table and is likely to be cached in the processor, and
2. you are running things in a quite tight loop and/or the processor can preload the data.

Background and why

From a processor perspective, your memory is slow. To compensate for the difference in speed, a couple of caches are built into your processor (L1/L2 cache). So imagine that you're doing your nice calculations and figure out that you need a piece of memory. The processor will get its 'load' operation and loads the piece of memory into cache -- and then uses the cache to do the rest of the calculations. Because memory is relatively slow, this 'load' will slow down your program.

Like branch prediction, this was optimized in the Pentium processors: the processor predicts that it needs to load a piece of data and attempts to load that into the cache before the operation actually hits the cache. As we've already seen, branch prediction sometimes goes horribly wrong -- in the worst case scenario you need to go back and actually wait for a memory load, which will take forever (in other words: failing branch prediction is bad, a memory load after a branch prediction fail is just horrible!).

Fortunately for us, if the memory access pattern is predictable, the processor will load it in its fast cache and all is well.

The first thing we need to know is what is small? While smaller is generally better, a rule of thumb is to stick to lookup tables that are <= 4096 bytes in size. As an upper limit: if your lookup table is larger than 64K it's probably worth reconsidering.

Constructing a table

So we've figured out that we can create a small table. Next thing to do is get a lookup function in place. Lookup functions are usually small functions that use a couple of basic integer operations (and, or, xor, shift, add, remove and perhaps multiply). You want to have your input translated by the lookup function to some kind of 'unique key' in your table, which then simply gives you the answer of all the work you wanted it to do.

In this case: >= 128 means we can keep the value, < 128 means we get rid of it. The easiest way to do that is by using an 'AND': if we keep it, we AND it with 7FFFFFFF; if we want to get rid of it, we AND it with 0. Notice also that 128 is a power of 2 -- so we can go ahead and make a table of 32768/128 integers and fill it with one zero and a lot of 7FFFFFFFF's.

Managed languages

You might wonder why this works well in managed languages. After all, managed languages check the boundaries of the arrays with a branch to ensure you don't mess up...

Well, not exactly... :-)

There has been quite some work on eliminating this branch for managed languages. For example:

for (int i = 0; i < array.Length; ++i)
{
   // Use array[i]
}

In this case, it's obvious to the compiler that the boundary condition will never be hit. At least the Microsoft JIT compiler (but I expect Java does similar things) will notice this and remove the check altogether. WOW, that means no branch. Similarly, it will deal with other obvious cases.

If you run into trouble with lookups in managed languages -- the key is to add a & 0x[something]FFF to your lookup function to make the boundary check predictable -- and watch it going faster.

The result of this case

// Generate data
int arraySize = 32768;
int[] data = new int[arraySize];

Random random = new Random(0);
for (int c = 0; c < arraySize; ++c)
{
    data[c] = random.Next(256);
}

/*To keep the spirit of the code intact, I'll make a separate lookup table
(I assume we cannot modify 'data' or the number of loops)*/

int[] lookup = new int[256];

for (int c = 0; c < 256; ++c)
{
    lookup[c] = (c >= 128) ? c : 0;
}

// Test
DateTime startTime = System.DateTime.Now;
long sum = 0;

for (int i = 0; i < 100000; ++i)
{
    // Primary loop
    for (int j = 0; j < arraySize; ++j)
    {
        /* Here you basically want to use simple operations - so no
        random branches, but things like &, |, *, -, +, etc. are fine. */
        sum += lookup[data[j]];
    }
}

DateTime endTime = System.DateTime.Now;
Console.WriteLine(endTime - startTime);
Console.WriteLine("sum = " + sum);
Console.ReadLine();

In the HTML (supposing that the checkboxes are in the first column of every row in a table).

<tr ng-repeat="item in fruits">
    <td><input type="checkbox" ng-model="item.checked" ng-click="getChecked(item)"></td>
    <td ng-bind="fruit.name"></td>
    <td ng-bind="fruit.color"></td>
    ...
</tr>

In the controllers.js file:

// The data initialization part...
$scope.fruits = [
    {
      name: ....,
      color:....
    },
    {
      name: ....,
      color:....
    }
     ...
    ];

// The checked or not data is stored in the object array elements themselves
$scope.fruits.forEach(function(item){
    item.checked = false;
});

// The array to store checked fruit items
$scope.checkedItems = [];

// Every click on any checkbox will trigger the filter to find checked items
$scope.getChecked = function(item){
    $scope.checkedItems = $filter("filter")($scope.fruits,{checked:true});
};

The solution I present is safe, simple and compatible with Internet Explorer, FireFox and Chrome.

This approach is new and complete. I not found nothing equal to that solution on the internet. Is simple, cross-browser (Internet Explorer, Chrome and Firefox), preserves the layout, use the select itself and is easy to use.

Note: JQuery is required.

HTML CODE

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>CustonSelect</title>
<script type="text/javascript" src="./jquery-1.3.2.js"></script>
<script type="text/javascript" src="./CustomSelect.js"></script>
</head>
<div id="testDiv"></div>
<body>
    <table>
        <tr>
            <td>
                <select id="Select0" >
                    <option value="0000">0000</option>
                    <option value="0001">0001</option>
                    <option value="0002">0002</option>
                    <option value="0003">0003</option>
                    <option value="0004">0004</option>
                    <option value="0005">0005</option>
                    <option value="0006">0006</option>
                    <option value="0007">0007</option>
                    <option value="0008">0008</option>
                    <option value="0009">0009</option>
                    <option value="0010">0010</option>
                    <option value="0011">0011</option>
                    <option value="0012">0012</option>
                    <option value="0013">0013</option>
                    <option value="0014">0014</option>
                    <option value="0015">0015</option>
                    <option value="0016">0016</option>
                    <option value="0017">0017</option>
                    <option value="0018">0018</option>
                    <option value="0019">0019</option>
                    <option value="0020">0020</option>
                    <option value="0021">0021</option>
                    <option value="0022">0022</option>
                    <option value="0023">0023</option>
                    <option value="0024">0024</option>
                    <option value="0025">0025</option>
                    <option value="0026">0026</option>
                    <option value="0027">0027</option>
                    <option value="0028">0028</option>
                    <option value="0029">0029</option>
                    <option value="0030">0030</option>
                    <option value="0031">0031</option>
                    <option value="0032">0032</option>
                    <option value="0033">0033</option>
                    <option value="0034">0034</option>
                    <option value="0035">0035</option>
                    <option value="0036">0036</option>
                    <option value="0037">0037</option>
                    <option value="0038">0038</option>
                    <option value="0039">0039</option>
                    <option value="0040">0040</option>
                </select>
            </td>
        </tr>
        <tr>
            <td>
                <select id="Select1" >
                    <option value="0000">0000</option>
                    <option value="0001">0001</option>
                    <option value="0002">0002</option>
                    <option value="0003">0003</option>
                    <option value="0004">0004</option>
                    <option value="0005">0005</option>
                    <option value="0006">0006</option>
                    <option value="0007">0007</option>
                    <option value="0008">0008</option>
                    <option value="0009">0009</option>
                    <option value="0010">0010</option>
                    <option value="0011">0011</option>
                    <option value="0012">0012</option>
                    <option value="0013">0013</option>
                    <option value="0014">0014</option>
                    <option value="0015">0015</option>
                    <option value="0016">0016</option>
                    <option value="0017">0017</option>
                    <option value="0018">0018</option>
                    <option value="0019">0019</option>
                    <option value="0020">0020</option>
                    <option value="0021">0021</option>
                    <option value="0022">0022</option>
                    <option value="0023">0023</option>
                    <option value="0024">0024</option>
                    <option value="0025">0025</option>
                    <option value="0026">0026</option>
                    <option value="0027">0027</option>
                    <option value="0028">0028</option>
                    <option value="0029">0029</option>
                    <option value="0030">0030</option>
                    <option value="0031">0031</option>
                    <option value="0032">0032</option>
                    <option value="0033">0033</option>
                    <option value="0034">0034</option>
                    <option value="0035">0035</option>
                    <option value="0036">0036</option>
                    <option value="0037">0037</option>
                    <option value="0038">0038</option>
                    <option value="0039">0039</option>
                    <option value="0040">0040</option>
                </select>
            </td>
        </tr>
        <tr>
            <td>
                <select id="Select2" >
                    <option value="0000">0000</option>
                    <option value="0001">0001</option>
                    <option value="0002">0002</option>
                    <option value="0003">0003</option>
                    <option value="0004">0004</option>
                    <option value="0005">0005</option>
                    <option value="0006">0006</option>
                    <option value="0007">0007</option>
                    <option value="0008">0008</option>
                    <option value="0009">0009</option>
                    <option value="0010">0010</option>
                    <option value="0011">0011</option>
                    <option value="0012">0012</option>
                    <option value="0013">0013</option>
                    <option value="0014">0014</option>
                    <option value="0015">0015</option>
                    <option value="0016">0016</option>
                    <option value="0017">0017</option>
                    <option value="0018">0018</option>
                    <option value="0019">0019</option>
                    <option value="0020">0020</option>
                    <option value="0021">0021</option>
                    <option value="0022">0022</option>
                    <option value="0023">0023</option>
                    <option value="0024">0024</option>
                    <option value="0025">0025</option>
                    <option value="0026">0026</option>
                    <option value="0027">0027</option>
                    <option value="0028">0028</option>
                    <option value="0029">0029</option>
                    <option value="0030">0030</option>
                    <option value="0031">0031</option>
                    <option value="0032">0032</option>
                    <option value="0033">0033</option>
                    <option value="0034">0034</option>
                    <option value="0035">0035</option>
                    <option value="0036">0036</option>
                    <option value="0037">0037</option>
                    <option value="0038">0038</option>
                    <option value="0039">0039</option>
                    <option value="0040">0040</option>
                </select>
            </td>
        </tr>
        <tr>
            <td>
                <select id="Select3" >
                    <option value="0000">0000</option>
                    <option value="0001">0001</option>
                    <option value="0002">0002</option>
                    <option value="0003">0003</option>
                    <option value="0004">0004</option>
                    <option value="0005">0005</option>
                    <option value="0006">0006</option>
                    <option value="0007">0007</option>
                    <option value="0008">0008</option>
                    <option value="0009">0009</option>
                    <option value="0010">0010</option>
                    <option value="0011">0011</option>
                    <option value="0012">0012</option>
                    <option value="0013">0013</option>
                    <option value="0014">0014</option>
                    <option value="0015">0015</option>
                    <option value="0016">0016</option>
                    <option value="0017">0017</option>
                    <option value="0018">0018</option>
                    <option value="0019">0019</option>
                    <option value="0020">0020</option>
                    <option value="0021">0021</option>
                    <option value="0022">0022</option>
                    <option value="0023">0023</option>
                    <option value="0024">0024</option>
                    <option value="0025">0025</option>
                    <option value="0026">0026</option>
                    <option value="0027">0027</option>
                    <option value="0028">0028</option>
                    <option value="0029">0029</option>
                    <option value="0030">0030</option>
                    <option value="0031">0031</option>
                    <option value="0032">0032</option>
                    <option value="0033">0033</option>
                    <option value="0034">0034</option>
                    <option value="0035">0035</option>
                    <option value="0036">0036</option>
                    <option value="0037">0037</option>
                    <option value="0038">0038</option>
                    <option value="0039">0039</option>
                    <option value="0040">0040</option>
                </select>
            </td>
        </tr>
        <tr>
            <td>
                <select id="Select4" >
                    <option value="0000">0000</option>
                    <option value="0001">0001</option>
                    <option value="0002">0002</option>
                    <option value="0003">0003</option>
                    <option value="0004">0004</option>
                    <option value="0005">0005</option>
                    <option value="0006">0006</option>
                    <option value="0007">0007</option>
                    <option value="0008">0008</option>
                    <option value="0009">0009</option>
                    <option value="0010">0010</option>
                    <option value="0011">0011</option>
                    <option value="0012">0012</option>
                    <option value="0013">0013</option>
                    <option value="0014">0014</option>
                    <option value="0015">0015</option>
                    <option value="0016">0016</option>
                    <option value="0017">0017</option>
                    <option value="0018">0018</option>
                    <option value="0019">0019</option>
                    <option value="0020">0020</option>
                    <option value="0021">0021</option>
                    <option value="0022">0022</option>
                    <option value="0023">0023</option>
                    <option value="0024">0024</option>
                    <option value="0025">0025</option>
                    <option value="0026">0026</option>
                    <option value="0027">0027</option>
                    <option value="0028">0028</option>
                    <option value="0029">0029</option>
                    <option value="0030">0030</option>
                    <option value="0031">0031</option>
                    <option value="0032">0032</option>
                    <option value="0033">0033</option>
                    <option value="0034">0034</option>
                    <option value="0035">0035</option>
                    <option value="0036">0036</option>
                    <option value="0037">0037</option>
                    <option value="0038">0038</option>
                    <option value="0039">0039</option>
                    <option value="0040">0040</option>
                </select>
            </td>
        </tr>
    </table>
    <input type="button" id="Button0" value="MoveLayout!"/>
</body>
</html>

JAVASCRIPT CODE

var customSelectFields = new Array();


// Note: The list of selects to be modified! By Questor
customSelectFields[0] = "Select0";
customSelectFields[1] = "Select1";
customSelectFields[2] = "Select2";
customSelectFields[3] = "Select3";
customSelectFields[4] = "Select4";

$(document).ready(function()
{


    //Note: To debug! By Questor
    $("#Button0").click(function(event){ AddTestDiv(); });

    StartUpCustomSelect(null);  

});


//Note: To test! By Questor
function AddTestDiv()
{
    $("#testDiv").append("<div style=\"width:100px;height:100px;\"></div>");
}


//Note: Startup selects customization scheme! By Questor
function StartUpCustomSelect(what)
{

    for (i = 0; i < customSelectFields.length; i++)
    {

        $("#" + customSelectFields[i] + "").click(function(event){ UpCustomSelect(this); });
        $("#" + customSelectFields[i] + "").wrap("<div id=\"selectDiv_" + customSelectFields[i] + "\" onmouseover=\"BlockCustomSelectAgain();\" status=\"CLOSED\"></div>").parent().after("<div id=\"coverSelectDiv_" + customSelectFields[i] + "\" onclick=\"UpOrDownCustomSelect(this);\" onmouseover=\"BlockCustomSelectAgain();\"></div>");


        //Note: Avoid breaking the layout when the CSS is modified from "position" to "absolute" on the select! By Questor
        $("#" + customSelectFields[i] + "").parent().css({'width': $("#" + customSelectFields[i] + "")[0].offsetWidth + 'px', 'height': $("#" + customSelectFields[i] + "")[0].offsetHeight + 'px'});

        BlockCustomSelect($("#" + customSelectFields[i] + ""));

    }
}


//Note: Repositions the div that covers the select using the "onmouseover" event so 
//Note: if element on the screen move the div always stand over it (recalculate! By Questor
function BlockCustomSelectAgain(what)
{
    for (i = 0; i < customSelectFields.length; i++)
    {
        if($("#" + customSelectFields[i] + "").parent().attr("status") == "CLOSED")
        {
            BlockCustomSelect($("#" + customSelectFields[i] + ""));
        }
    }
}


//Note: Does not allow the select to be clicked or clickable! By Questor
function BlockCustomSelect(what)
{

    var coverSelectDiv = $(what).parent().next();


    //Note: Ensures the integrity of the div style! By Questor
    $(coverSelectDiv).removeAttr('style');


    //Note: To resolve compatibility issues! By Questor
    var backgroundValue = "";
    var filerValue = "";
    if(navigator.appName == "Microsoft Internet Explorer")
    {
        backgroundValue = 'url(fakeimage)';
        filerValue = 'progid:DXImageTransform.Microsoft.AlphaImageLoader(enabled=true, sizingMethod=\'scale\', src=\'fakeimage\' )';
    }


    //Note: To debug! By Questor
    //'border': '5px #000 solid',

    $(coverSelectDiv).css({
        'position': 'absolute', 
        'top': $(what).offset().top + 'px', 
        'left': $(what).offset().left + 'px', 
        'width': $(what)[0].offsetWidth + 'px', 
        'height': $(what)[0].offsetHeight + 'px', 
        'background': backgroundValue,
        '-moz-background-size':'cover',
        '-webkit-background-size':'cover',
        'background-size':'cover',
        'filer': filerValue
    });

}


//Note: Allow the select to be clicked or clickable! By Questor
function ReleaseCustomSelect(what)
{

    var coverSelectDiv = $(what).parent().next();

    $(coverSelectDiv).removeAttr('style');
    $(coverSelectDiv).css({'display': 'none'});

}


//Note: Open the select! By Questor
function DownCustomSelect(what)
{


    //Note: Avoid breaking the layout. Avoid that select events be overwritten by the others! By Questor
    $(what).css({
        'position': 'absolute', 
        'z-index': '100'
    });


    //Note: Open dropdown! By Questor
    $(what).attr("size","10");

    ReleaseCustomSelect(what);


    //Note: Avoids the side-effect of the select loses focus.! By Questor
    $(what).focus();


    //Note: Allows you to select elements using the enter key when the select is on focus! By Questor
    $(what).keyup(function(e){
        if(e.keyCode == 13)
        {
            UpCustomSelect(what);
        }
    });


    //Note: Closes the select when loses focus! By Questor
    $(what).blur(function(e){
        UpCustomSelect(what);
    });

    $(what).parent().attr("status", "OPENED");

}


//Note: Close the select! By Questor
function UpCustomSelect(what)
{

    $(what).css("position","static");


    //Note: Close dropdown! By Questor
    $(what).attr("size","1");

    BlockCustomSelect(what);

    $(what).parent().attr("status", "CLOSED");

}


//Note: Closes or opens the select depending on the current status! By Questor
function UpOrDownCustomSelect(what)
{

    var customizedSelect = $($(what).prev().children()[0]);

    if($(what).prev().attr("status") == "CLOSED")
    {
        DownCustomSelect(customizedSelect);
    }
    else if($(what).prev().attr("status") == "OPENED")
    {
        UpCustomSelect(customizedSelect);
    }

}

I solved this by getting the Bluetooth name, but not from the BluetoothAdapter (that needs Bluetooth permission).

Here's the code:

Settings.Secure.getString(getContentResolver(), "bluetooth_name");

No extra permissions needed.

jQuery('#id').css("display","block")

The display property can have many possible values, among which are block, inline, inline-block, and many more.

The .show() method doesn't set it necessarily to block, but rather resets it to what you defined it (if at all).

In the jQuery source code, you can see how they're setting the display property to "" (an empty string) to check what it was before any jQuery manipulation: little link.

On the other hand, hiding is done via display: none;, so you can consider .hide() and .css("display", "none") equivalent to some point.

It's recommended to use .show() and .hide() anyway to avoid any gotcha's (plus, they're shorter).

1. I had the same problem when I started to used babel... But later, I had a solution... I haven't had the problem anymore so far... Currently, Node v12.14.1, "@babel/node": "^7.8.4", I use babel-node and nodemon to execute (node is fine as well..)
2. package.json: "start": "nodemon --exec babel-node server.js "debug": "babel-node debug server.js" !!note: server.js is my entry file, you can use yours.
3. launch.json When you debug, you also need to config your launch.json file "runtimeExecutable": "${workspaceRoot}/node_modules/.bin/babel-node" !!note: plus runtimeExecutable into the configuration.
4. Of course, with babel-node, you also normally need and edit another file, such as babel.config.js/.babelrc file

When I studied IT in college my prof. made it simple for me:

"A computer "program" and an "application" (a.k.a. 'app') are one-in-the-same. The only difference is a technical one. While both are the same, an 'application' is a computer program launched and dependent upon an operating system to execute."

Got it right on the exam.

So when you click on a word processor, for example, it is an application, as is that hidden file that runs the printer spooler launched only by the OS. The two programs depend on the OS, whereby the OS itself or your internal BIOS programming are not 'apps' in the technical sense as they communicate directly with the computer hardware itself.

Unless the definition has changed in the past few years, commercial entities like Microsoft and Apple are not using the terms properly, preferring sexy marketing by making the term 'apps' seem like something popular market and 'new', because a "computer program" sounds too 'nerdy'. :(

If you don't have MySQL installed on your host, you have to execute it in the container (https://docs.docker.com/engine/reference/commandline/exec/#/examples gives explanation about docker run vs docker exec).

Considering your container is running, you might use docker exec yourcontainername mysql -u root -p to access to the client.

Also, if you are using Docker Compose, and you've declared a mysql db service named database, you can use : docker-compose exec database mysql -u root -p

The two have different semantics when it comes to the key already existing in the map. So they aren't really directly comparable.

But the operator[] version requires default constructing the value, and then assigning, so if this is more expensive then copy construction, then it will be more expensive. Sometimes default construction doesn't make sense, and then it would be impossible to use the operator[] version.

I have always had to write some PL/SQL for this or I just concatenate a ',' to the field and copy into an editor and remove the CR from the list giving me the single line.

That is,

select country_name||', ' country from countries

A little bit long winded both ways.

If you look at Ask Tom you will see loads of possible solutions but they all revert to type declarations and/or PL/SQL

Ask Tom

If you want it as a string (for example, a 10-digit phone number) you can use this:

n = 10
''.join(["{}".format(randint(0, 9)) for num in range(0, n)])

Use CSS background-clip:

background-clip: content-box;

The background will be painted within the content box.

This worked for me.

1. Right-click on top-level folder containing the service executable. Go to Properties
2. Go to "Security" Tab
3. Click "EDIT"
4. Click "ADD"
5. Enter the name "SYSTEM", click OK
6. Highlight SYSTEM user, and click ALLOW check-box next to "Full control"
7. Click OK twice

Dim a As Range, b As Range

Set a = Selection

For Each b In a.Rows
    MsgBox b.Address
Next

I managed to do it by using the following code.

@Html.TextBoxFor(model => model.EndTime, new { type = "time" })

Don't escape (\) special characters when editing/adding to your $PATH variable. For example, an application directory in program files would look like: PATH=$PATH:/c/Program Files (x86)/random/application

Don't do this:
PATH=$PATH:/c/Program\ Files\ \\(x86\\)/random/application/

Hope this helps.

Python's string interpolation is similar to C's printf()

If you try:

name = "SpongeBob Squarepants"
print "Who lives in a Pineapple under the sea? %s" % name

The tag %s will be replaced with the name variable. You should take a look to the print function tags: http://docs.python.org/library/functions.html

Perhaps a more modern and functional way to achieve what you wish:

>>> subj = 'A.B!C?'
>>> list = set([',', '!', '.', ';', '?'])
>>> filter(lambda x: x not in list, subj)
'ABC'

please note that for this particular purpose it's quite an overkill, but once you need more complex conditions, filter comes handy

instanceof is probably going to be more costly than a simple equals in most real world implementations (that is, the ones where instanceof is really needed, and you can't just solve it by overriding a common method, like every beginner textbook as well as Demian above suggest).

Why is that? Because what is probably going to happen is that you have several interfaces, that provide some functionality (let's say, interfaces x, y and z), and some objects to manipulate that may (or not) implement one of those interfaces... but not directly. Say, for instance, I have:

w extends x

A implements w

B extends A

C extends B, implements y

D extends C, implements z

Suppose I am processing an instance of D, the object d. Computing (d instanceof x) requires to take d.getClass(), loop through the interfaces it implements to know whether one is == to x, and if not do so again recursively for all of their ancestors... In our case, if you do a breadth first exploration of that tree, yields at least 8 comparisons, supposing y and z don't extend anything...

The complexity of a real-world derivation tree is likely to be higher. In some cases, the JIT can optimize most of it away, if it is able to resolve in advance d as being, in all possible cases, an instance of something that extends x. Realistically, however, you are going to go through that tree traversal most of the time.

If that becomes an issue, I would suggest using a handler map instead, linking the concrete class of the object to a closure that does the handling. It removes the tree traversal phase in favor of a direct mapping. However, beware that if you have set a handler for C.class, my object d above will not be recognized.

here are my 2 cents, I hope they help...

I just learned something new thanks to Artiso. I gave each module a name in the properties box. These names were also what I declared in the module. When I tried to call my second module, I kept getting an error: Compile error: Expected variable or procedure, not module

After reading Artiso's comment above about not having the same names, I renamed my second module, called it from the first, and problem solved. Interesting stuff! Thanks for the info Artiso!

In case my experience is unclear:

Module Name: AllFSGroupsCY Public Sub AllFSGroupsCY()

Module Name: AllFSGroupsPY Public Sub AllFSGroupsPY()

From AllFSGroupsCY()

Public Sub FSGroupsCY()

    AllFSGroupsPY 'will error each time until the properties name is changed

End Sub

I found a solution using set-url which is concise and fairly easy to understand:

1. create a new repo at Github
2. cd into the existing repository on your local machine (if you haven't cloned it yet, then do this first)
3. git remote set-url origin https://github.com/user/example.git
4. git push -u origin master

If you know the number of entries ex ante, you should preallocate the space by also providing the index (taking the data example from a different answer):

import pandas as pd
import numpy as np
# we know we're gonna have 5 rows of data
numberOfRows = 5
# create dataframe
df = pd.DataFrame(index=np.arange(0, numberOfRows), columns=('lib', 'qty1', 'qty2') )

# now fill it up row by row
for x in np.arange(0, numberOfRows):
    #loc or iloc both work here since the index is natural numbers
    df.loc[x] = [np.random.randint(-1,1) for n in range(3)]
In[23]: df
Out[23]: 
   lib  qty1  qty2
0   -1    -1    -1
1    0     0     0
2   -1     0    -1
3    0    -1     0
4   -1     0     0

Speed comparison

In[30]: %timeit tryThis() # function wrapper for this answer
In[31]: %timeit tryOther() # function wrapper without index (see, for example, @fred)
1000 loops, best of 3: 1.23 ms per loop
100 loops, best of 3: 2.31 ms per loop

And - as from the comments - with a size of 6000, the speed difference becomes even larger:

Increasing the size of the array (12) and the number of rows (500) makes the speed difference more striking: 313ms vs 2.29s

The context parameter just sets the value of this in the iterator function.

var someOtherArray = ["name","patrick","d","w"];

_.each([1, 2, 3], function(num) { 
    // In here, "this" refers to the same Array as "someOtherArray"

    alert( this[num] ); // num is the value from the array being iterated
                        //    so this[num] gets the item at the "num" index of
                        //    someOtherArray.
}, someOtherArray);

Working Example: http://jsfiddle.net/a6Rx4/

It uses the number from each member of the Array being iterated to get the item at that index of someOtherArray, which is represented by this since we passed it as the context parameter.

If you do not set the context, then this will refer to the window object.

call generateNumbers(numbers);, your generateNumbers(); expects int[] as an argument ans you were passing none, thus the error

A modern approach is to use ASP.NET Web API 2 (server-side) with jQuery Ajax (client-side).

Like page methods and ASMX web methods, Web API allows you to write C# code in ASP.NET which can be called from a browser or from anywhere, really!

Here is an example Web API controller, which exposes API methods allowing clients to retrieve details about 1 or all products (in the real world, products would likely be loaded from a database):

public class ProductsController : ApiController
{
    Product[] products = new Product[] 
    { 
        new Product { Id = 1, Name = "Tomato Soup", Category = "Groceries", Price = 1 }, 
        new Product { Id = 2, Name = "Yo-yo", Category = "Toys", Price = 3.75M }, 
        new Product { Id = 3, Name = "Hammer", Category = "Hardware", Price = 16.99M } 
    };

    [Route("api/products")]
    [HttpGet]
    public IEnumerable<Product> GetAllProducts()
    {
        return products;
    }

    [Route("api/product/{id}")]
    [HttpGet]
    public IHttpActionResult GetProduct(int id)
    {
        var product = products.FirstOrDefault((p) => p.Id == id);
        if (product == null)
        {
            return NotFound();
        }
        return Ok(product);
    }
}

The controller uses this example model class:

public class Product
{
    public int Id { get; set; }
    public string Name { get; set; }
    public string Category { get; set; }
    public decimal Price { get; set; }
}

Example jQuery Ajax call to get and iterate over a list of products:

$(document).ready(function () {
    // Send an AJAX request
    $.getJSON("/api/products")
        .done(function (data) {
            // On success, 'data' contains a list of products.
            $.each(data, function (key, item) {
                // Add a list item for the product.
                $('<li>', { text: formatItem(item) }).appendTo($('#products'));
            });
        });
});

Not only does this allow you to easily create a modern Web API, you can if you need to get really professional and document it too, using ASP.NET Web API Help Pages and/or Swashbuckle.

Web API can be retro-fitted (added) to an existing ASP.NET Web Forms project. In that case you will need to add routing instructions into the Application_Start method in the file Global.asax:

RouteTable.Routes.MapHttpRoute(
    name: "DefaultApi",
    routeTemplate: "api/{controller}/{id}",
    defaults: new { id = System.Web.Http.RouteParameter.Optional }
);

Documentation

• Tutorial: Getting Started with ASP.NET Web API 2 (C#)
• Tutorial for those with legacy sites: Using Web API with ASP.NET Web Forms
• MSDN: ASP.NET Web API 2

You can just create a new branch and switch onto it. Commit your changes then:

git branch dirty
git checkout dirty
// And your commit follows ...

Alternatively, you can also checkout an existing branch (just git checkout <name>). But only, if there are no collisions (the base of all edited files is the same as in your current branch). Otherwise you will get a message.

This may not be the exact definition but I'll give you an example: If you were to create a random number taking it from the system time, here using the unsigned variable is beneficial as there is large scope for random numbers as signed numbers give both positive and negative numbers. As the system time can't be negative we use unsigned variable(Only positive numbers) and we have more wide range of random numbers.

FWIW, here's the dictionary thing. After setting a reference to MS Scripting. You can jack around with the array size of avInput to match your needs.

Sub somemacro()
Dim avInput As Variant
Dim uvals As Dictionary
Dim i As Integer
Dim rop As Range

avInput = Sheets("data").UsedRange
Set uvals = New Dictionary


For i = 1 To UBound(avInput, 1)
    If uvals.Exists(avInput(i, 1)) = False Then
        uvals.Add avInput(i, 1), 1
    Else
        uvals.Item(avInput(i, 1)) = uvals.Item(avInput(i, 1)) + 1
    End If
Next i

ReDim avInput(1 To uvals.Count)
i = 1

For Each kv In uvals.Keys
    avInput(i) = kv
    i = i + 1
Next kv

Set rop = Sheets("sheet2").Range("a1")
rop.Resize(UBound(avInput, 1), 1) = Application.Transpose(avInput)




End Sub

import * as utils from './utils.js'; 

If you do the above, you will be able to use functions in utils.js as

utils.someFunction()

The problem is that you can't use a list as the key in a dict, since dict keys need to be immutable. Use a tuple instead.

This is a list:

[x, y]

This is a tuple:

(x, y)

Note that in most cases, the ( and ) are optional, since , is what actually defines a tuple (as long as it's not surrounded by [] or {}, or used as a function argument).

You might find the section on tuples in the Python tutorial useful:

Though tuples may seem similar to lists, they are often used in different situations and for different purposes. Tuples are immutable, and usually contain an heterogeneous sequence of elements that are accessed via unpacking (see later in this section) or indexing (or even by attribute in the case of namedtuples). Lists are mutable, and their elements are usually homogeneous and are accessed by iterating over the list.

And in the section on dictionaries:

Unlike sequences, which are indexed by a range of numbers, dictionaries are indexed by keys, which can be any immutable type; strings and numbers can always be keys. Tuples can be used as keys if they contain only strings, numbers, or tuples; if a tuple contains any mutable object either directly or indirectly, it cannot be used as a key. You can’t use lists as keys, since lists can be modified in place using index assignments, slice assignments, or methods like append() and extend().

In case you're wondering what the error message means, it's complaining because there's no built-in hash function for lists (by design), and dictionaries are implemented as hash tables.

Using some of the answers on this page and here, I came up with my own answer as none of these answers fully solved it for me.

Here is crux of it

var startDate = "27 Apr 2017";
var numOfYears = 1;
var expireDate = new Date(startDate);
expireDate.setFullYear(expireDate.getFullYear() + numOfYears);
expireDate.setDate(expireDate.getDate() -1);

And here a a JSFiddle that has a working example: https://jsfiddle.net/wavesailor/g9a6qqq5/

No need to initialize an empty DataFrame (you weren't even doing that, you'd need pd.DataFrame() with the parens).

Instead, to create a DataFrame where each series is a column,

1. make a list of Series, series, and
2. concatenate them horizontally with df = pd.concat(series, axis=1)

Something like:

series = [pd.Series(mat[name][:, 1]) for name in Variables]
df = pd.concat(series, axis=1)

Addition:

When using the MySQL client library, then you should prevent a conversion back to your connection's default charset. (see mysql_set_character_set()[1])

In this case, use an additional cast to binary:

SELECT column1, CAST(CONVERT(column2 USING utf8) AS binary)
FROM my_table
WHERE my_condition;

Otherwise, the SELECT statement converts to utf-8, but your client library converts it back to a (potentially different) default connection charset.

if this structure is to be used by some other file func.c how to do it?

When a type is used in a file (i.e. func.c file), it must be visible. The very worst way to do it is copy paste it in each source file needed it.

The right way is putting it in an header file, and include this header file whenever needed.

shall we open a new header file and declare the structure there and include that header in the func.c?

This is the solution I like more, because it makes the code highly modular. I would code your struct as:

#ifndef SOME_HEADER_GUARD_WITH_UNIQUE_NAME
#define SOME_HEADER_GUARD_WITH_UNIQUE_NAME

struct a
{ 
    int i;
    struct b
    {
        int j;
    }
};

#endif

I would put functions using this structure in the same header (the function that are "semantically" part of its "interface").

And usually, I could name the file after the structure name, and use that name again to choose the header guards defines.

If you need to declare a function using a pointer to the struct, you won't need the full struct definition. A simple forward declaration like:

struct a ;

Will be enough, and it decreases coupling.

or can we define the total structure in header file and include that in both source.c and func.c?

This is another way, easier somewhat, but less modular: Some code needing only your structure to work would still have to include all types.

In C++, this could lead to interesting complication, but this is out of topic (no C++ tag), so I won't elaborate.

then how to declare that structure as extern in both the files. ?

I fail to see the point, perhaps, but Greg Hewgill has a very good answer in his post How to declare a structure in a header that is to be used by multiple files in c?.

shall we typedef it then how?

• If you are using C++, don't.
• If you are using C, you should.

The reason being that C struct managing can be a pain: You have to declare the struct keyword everywhere it is used:

struct MyStruct ; /* Forward declaration */

struct MyStruct
{
   /* etc. */
} ;

void doSomething(struct MyStruct * p) /* parameter */
{
   struct MyStruct a ; /* variable */
   /* etc */
}

While a typedef will enable you to write it without the struct keyword.

struct MyStructTag ; /* Forward declaration */

typedef struct MyStructTag
{
   /* etc. */
} MyStruct ;

void doSomething(MyStruct * p) /* parameter */
{
   MyStruct a ; /* variable */
   /* etc */
}

It is important you still keep a name for the struct. Writing:

typedef struct
{
   /* etc. */
} MyStruct ;

will just create an anonymous struct with a typedef-ed name, and you won't be able to forward-declare it. So keep to the following format:

typedef struct MyStructTag
{
   /* etc. */
} MyStruct ;

Thus, you'll be able to use MyStruct everywhere you want to avoid adding the struct keyword, and still use MyStructTag when a typedef won't work (i.e. forward declaration)

Edit:

Corrected wrong assumption about C99 struct declaration, as rightfully remarked by Jonathan Leffler.

Edit 2018-06-01:

Craig Barnes reminds us in his comment that you don't need to keep separate names for the struct "tag" name and its "typedef" name, like I did above for the sake of clarity.

Indeed, the code above could well be written as:

typedef struct MyStruct
{
   /* etc. */
} MyStruct ;

IIRC, this is actually what C++ does with its simpler struct declaration, behind the scenes, to keep it compatible with C:

// C++ explicit declaration by the user
struct MyStruct
{
   /* etc. */
} ;
// C++ standard then implicitly adds the following line
typedef MyStruct MyStruct;

Back to C, I've seen both usages (separate names and same names), and none has drawbacks I know of, so using the same name makes reading simpler if you don't use C separate "namespaces" for structs and other symbols.

I'm using tesseract OCR engine with TessNet2 (a C# wrapper - http://www.pixel-technology.com/freeware/tessnet2/).

Some basic code:

using tessnet2;

...

Bitmap image = new Bitmap(@"u:\user files\bwalker\2849257.tif");
            tessnet2.Tesseract ocr = new tessnet2.Tesseract();
            ocr.SetVariable("tessedit_char_whitelist", "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz.,$-/#&=()\"':?"); // Accepted characters
            ocr.Init(@"C:\Users\bwalker\Documents\Visual Studio 2010\Projects\tessnetWinForms\tessnetWinForms\bin\Release\", "eng", false); // Directory of your tessdata folder
            List<tessnet2.Word> result = ocr.DoOCR(image, System.Drawing.Rectangle.Empty);
            string Results = "";
            foreach (tessnet2.Word word in result)
            {
                Results += word.Confidence + ", " + word.Text + ", " + word.Left + ", " + word.Top + ", " + word.Bottom + ", " + word.Right + "\n";
            }

Maybe it is too late, but I am answering for future searches. TO perform spelling mistake correction, you first need to make sure the word is not absurd or from slang like, caaaar, amazzzing etc. with repeated alphabets. So, we first need to get rid of these alphabets. As we know in English language words usually have a maximum of 2 repeated alphabets, e.g., hello., so we remove the extra repetitions from the words first and then check them for spelling. For removing the extra alphabets, you can use Regular Expression module in Python.

Once this is done use Pyspellchecker library from Python for correcting spellings.

For implementation visit this link: https://rustyonrampage.github.io/text-mining/2017/11/28/spelling-correction-with-python-and-nltk.html

To run rake tasks with traditional arguments style:

rake task arg1 arg2

And then use:

task :task do |_, args|
  puts "This is argument 1: #{args.first}"
end

Add following patch of rake gem:

Rake::Application.class_eval do

  alias origin_top_level top_level

  def top_level
    @top_level_tasks = [top_level_tasks.join(' ')]
    origin_top_level
  end

  def parse_task_string(string) # :nodoc:
    parts = string.split ' '
    return parts.shift, parts
  end

end

Rake::Task.class_eval do

  def invoke(*args)
    invoke_with_call_chain(args, Rake::InvocationChain::EMPTY)
  end

end

Late to the party, but if you use jQuery then there's an excellent plugin called Moment:

http://momentjs.com/

var myDateOfNowPlusThreeDays = moment().add(3, "days").toDate();

http://momentjs.com/docs/#/manipulating/

And lots of other good stuff in there!

Edit: jQuery reference removed thanks to aikeru's comment

Format a string

MessageFormat - surround the selection with a MessageFormat.

 ${:import(java.text.MessageFormat)} 
 MessageFormat.format(${word_selection}, ${cursor})

This lets me move a cursor to a string, expand the selection to the entire string (Shift-Alt-Up), then Ctrl-Space twice.

Lock the selection

lock - surround the selected lines with a try finally lock. Assume the presence of a lock variable.

${lock}.acquire();
try {
    ${line_selection}
    ${cursor}
} finally {
    ${lock}.release();
}

NB ${line_selection} templates show up in the Surround With menu (Alt-Shift-Z).

Simple answer:

In the preamble make sure you have \usepackage{amssymb}

Then in the preamble we can define this simple command: \newcommand{\qed}{\hfill $\blacksquare$}

Then whenever you want the QED symbol to complete a proof, you type \qed.

If you prefer a hollow square, replace \blacksquare with \square

As for "Note: we're using maven 2 for our build. I've tried using maven's pre- & post-integration-test phases, but, if a test fails, maven stops and doesn't run post-integration-test, which is no help."

you can try the failsafe-plugin instead, I think it has the facility to ensure cleanup occurs regardless of setup or intermediate stage status

Try changing the name of the variable as sometimes it clashes with other modules/subs

 Dim Workbk As Workbook
 Dim Worksh As Worksheet

But also, try

 Set ws = wb.Sheets("name")

I can't remember if it works with Sheet

If anyone is looking for a React Hook approach to implementing setInterval. Dan Abramov talked about it on his blog. Check it out if you want a good read about the subject including a Class approach. Basically the code is a custom Hook that turns setInterval as declarative.

function useInterval(callback, delay) {
  const savedCallback = useRef();

  // Remember the latest callback.
  useEffect(() => {
    savedCallback.current = callback;
  }, [callback]);

  // Set up the interval.
  useEffect(() => {
    function tick() {
      savedCallback.current();
    }
    if (delay !== null) {
      let id = setInterval(tick, delay);
      return () => clearInterval(id);
    }
  }, [delay]);
}

Also posting the CodeSandbox link for convenience: https://codesandbox.io/s/105x531vkq

rows = a.shape[0] # 2 
cols = a.shape[1] # 2
a.shape #(2,2)
a.size # rows * cols = 4

You can overwrite the existing jenkins.war file with the new one and then restart Jenkins.

This file is usually located in /usr/share/jenkins.

If this is not the case for your system, in Manage Jenkins -> System Information, it will display the path to the .war file under executable-war.

Check output of console.log(req) or console.log(req.headers);

try - Add sensitive code catch - to handle exception finally - always executed whether exception caught or not. Associated with try -catch. Used to close the resource which we opened in try block throw - To handover our created exception to JVM manually. Used to throw customized exception throws - To delegate the responsibility of exception handling to caller method or main method.

I was just wondering how the random number generator in C# works.

That's implementation-specific, but the wikipedia entry for pseudo-random number generators should give you some ideas.

I was also curious how I could make a program that generates random WHOLE INTEGER numbers from 1-100.

You can use Random.Next(int, int):

Random rng = new Random();
for (int i = 0; i < 10; i++)
{
    Console.WriteLine(rng.Next(1, 101));
}

Note that the upper bound is exclusive - which is why I've used 101 here.

You should also be aware of some of the "gotchas" associated with Random - in particular, you should not create a new instance every time you want to generate a random number, as otherwise if you generate lots of random numbers in a short space of time, you'll see a lot of repeats. See my article on this topic for more details.

:%s/$/\*/g

should work and so should :%s/$/*/g.

It simple with apply function in R

f <- apply(f,2,toupper)

No need to check if the column is character or any other type.

In it's simplest form you would use it like:

var html = _.template('<li><%= name %></li>', { name: 'John Smith' });
//html is now '<li>John Smith</li>'   

If you're going to be using a template a few times you'll want to compile it so it's faster:

var template = _.template('<li><%= name %></li>');

var html = [];
for (var key in names) {
    html += template({ name: names[i] });
}

console.log(html.join('')); //Outputs a string of <li> items

I personally prefer the Mustache style syntax. You can adjust the template token markers to use double curly braces:

_.templateSettings.interpolate = /\{\{(.+?)\}\}/g;

var template = _.template('<li>{{ name }}</li>');

You might be looking for this:

http://www.jsonschema.net

It is an online tool that can automatically generate JSON schema from JSON string. And you can edit the schema easily.

Personally, I use that:

    final Spinner spinner = (Spinner) (view.findViewById(R.id.userList));
    spinner.setOnItemSelectedListener(new AdapterView.OnItemSelectedListener() {
        @Override
        public void onItemSelected(AdapterView<?> parent, View view, int position, long id) {                

            userSelectedIndex = position;
        }

        @Override
        public void onNothingSelected(AdapterView<?> parent) {
        }
    });  

Try

String query = "INSERT INTO dbo.SMS_PW (id,username,password,email) VALUES (@id,@username, @password, @email)";
using(SqlConnection connection = new SqlConnection(connectionString))
using(SqlCommand command = new SqlCommand(query, connection))
{
    //a shorter syntax to adding parameters
    command.Parameters.Add("@id", SqlDbType.NChar).Value = "abc";

    command.Parameters.Add("@username", SqlDbType.NChar).Value = "abc";

    //a longer syntax for adding parameters
    command.Parameters.Add("@password", SqlDbType.NChar).Value = "abc";

    command.Parameters.Add("@email", SqlDbType.NChar).Value = "abc";

    //make sure you open and close(after executing) the connection
    connection.Open();
    command.ExecuteNonQuery();
}

As of PostgreSQL 9.4, you can use the ? operator:

select info->>'name' from rabbits where (info->'food')::jsonb ? 'carrots';

You can even index the ? query on the "food" key if you switch to the jsonb type instead:

alter table rabbits alter info type jsonb using info::jsonb;
create index on rabbits using gin ((info->'food'));
select info->>'name' from rabbits where info->'food' ? 'carrots';

Of course, you probably don't have time for that as a full-time rabbit keeper.

Update: Here's a demonstration of the performance improvements on a table of 1,000,000 rabbits where each rabbit likes two foods and 10% of them like carrots:

d=# -- Postgres 9.3 solution
d=# explain analyze select info->>'name' from rabbits where exists (
d(# select 1 from json_array_elements(info->'food') as food
d(#   where food::text = '"carrots"'
d(# );
 Execution time: 3084.927 ms

d=# -- Postgres 9.4+ solution
d=# explain analyze select info->'name' from rabbits where (info->'food')::jsonb ? 'carrots';
 Execution time: 1255.501 ms

d=# alter table rabbits alter info type jsonb using info::jsonb;
d=# explain analyze select info->'name' from rabbits where info->'food' ? 'carrots';
 Execution time: 465.919 ms

d=# create index on rabbits using gin ((info->'food'));
d=# explain analyze select info->'name' from rabbits where info->'food' ? 'carrots';
 Execution time: 256.478 ms

Depends on how your data is distributed. For a simple counter, the simplest function

f(i) = i

will be good (I suspect optimal, but I can't prove it).

document.getElementById('banner-contenedor').clientWidth

You can solve your problem using JAIL plugin that also allows you to lazy load images (improving the page performance) and passing the callback as parameter

$('img').asynchImageLoader({callback : function(){...}});

The HTML should look like

<img name="/global/images/sample1.jpg" src="/global/images/blank.gif" width="width" height="height" />

Your problem is here:

2013-11-14 17:57:20 5180 [ERROR] InnoDB: .\ibdata1 can't be opened in read-write mode

There's some problem with the ibdata1 file - maybe the permissions have changed on it? Perhaps some other process has it open. Does it even exist?

Fix this and possibly everything else will fall into place.

public static String cap1stChar(String userIdea)
{
    char[] stringArray = userIdea.toCharArray();
    stringArray[0] = Character.toUpperCase(stringArray[0]);
    return userIdea = new String(stringArray);
}

I've been thinking over this and experimenting with height of the elements: html, body and div. Finally I came up with the code:

<!DOCTYPE html>_x000D_
<html>_x000D_
<head>_x000D_
<meta charset="utf-8" />_x000D_
<title>Height question</title>_x000D_
<style>_x000D_
 html {height: 50%; border: solid red 3px; }_x000D_
 body {height: 70vh; border: solid green 3px; padding: 12pt; }_x000D_
 div {height: 90vh; border: solid blue 3px; padding: 24pt; }_x000D_
 _x000D_
</style>_x000D_
</head>_x000D_
<body>_x000D_
_x000D_
 <div id="container">_x000D_
  <p>&lt;html&gt; is red</p>_x000D_
  <p>&lt;body&gt; is green</p>_x000D_
  <p>&lt;div&gt; is blue</p>_x000D_
 </div>_x000D_
_x000D_
</body>_x000D_
</html>

With my browser (Firefox 65@mint 64), all three elements are of 1) different height, 2) every one is longer, than the previous (html is 50%, body is 70vh, and div 90vh). I also checked the styles without the height with respect to the html and body tags. Worked fine, too.

About CSS units: w3schools: CSS units

A note about the viewport: " Viewport = the browser window size. If the viewport is 50cm wide, 1vw = 0.5cm."

I resolved this error, by replacing the src attribute with https://code.jquery.com/jquery-3.5.1.min.js, the problem is caused by the slim version of JQuery.

Looking for EventHandling, ActionListener?

or code?

JButton b = new JButton("Clear");
b.addActionListener(new ActionListener(){
    public void actionPerformed(ActionEvent e){
        textfield.setText("");
        //textfield.setText(null); //or use this
    }
});

Also See
How to Use Buttons

In regards to your error and what's missing in your code. m is a name which is not defined for getmd5() function.

No offence, I know you are a beginner, but your code is all over the place. Let's look at your issues one by one :)

First, you are not using hashlib.md5.hexdigest() method correctly. Please refer explanation on hashlib functions in Python Doc Library. The correct way to return MD5 for provided string is to do something like this:

>>> import hashlib
>>> hashlib.md5("filename.exe").hexdigest()
'2a53375ff139d9837e93a38a279d63e5'

However, you have a bigger problem here. You are calculating MD5 on a file name string, where in reality MD5 is calculated based on file contents. You will need to basically read file contents and pipe it though MD5. My next example is not very efficient, but something like this:

>>> import hashlib
>>> hashlib.md5(open('filename.exe','rb').read()).hexdigest()
'd41d8cd98f00b204e9800998ecf8427e'

As you can clearly see second MD5 hash is totally different from the first one. The reason for that is that we are pushing contents of the file through, not just file name.

A simple solution could be something like that:

# Import hashlib library (md5 method is part of it)
import hashlib

# File to check
file_name = 'filename.exe'

# Correct original md5 goes here
original_md5 = '5d41402abc4b2a76b9719d911017c592'  

# Open,close, read file and calculate MD5 on its contents 
with open(file_name) as file_to_check:
    # read contents of the file
    data = file_to_check.read()    
    # pipe contents of the file through
    md5_returned = hashlib.md5(data).hexdigest()

# Finally compare original MD5 with freshly calculated
if original_md5 == md5_returned:
    print "MD5 verified."
else:
    print "MD5 verification failed!."

Please look at the post Python: Generating a MD5 checksum of a file. It explains in detail a couple of ways how it can be achieved efficiently.

Best of luck.