To summarize what has been commented in other answers:
//path = @"C:\Temp\Bar\Foo\Test.txt";
Directory.CreateDirectory(Path.GetDirectoryName(path));
Directory.CreateDirectory
will create the directories recursively and if the directory already exist it will return without an error.
If there happened to be a file Foo
at C:\Temp\Bar\Foo
an exception will be thrown.
UPDATE This feature is removed since Firefox 17 (see https://bugzilla.mozilla.org/show_bug.cgi?id=546848).
On Firefox you (the programmer) can do this from within a JavaScript file:
netscape.security.PrivilegeManager.enablePrivilege("UniversalBrowserRead");
netscape.security.PrivilegeManager.enablePrivilege("UniversalBrowserWrite");
and you (the browser user) will be prompted to allow access. (for Firefox you just need to do this once every time the browser is started)
If the browser user is someone else, they have to grant permission.
Going off of what Derloopkat said, which still can fail on conversion (no offense Derloopkat) because Excel is terrible at this:
It will open, check it to make sure it's accurate and then save as an excel file.
You can also try this expression, I have tested it against many email addresses.
var pattern = /^[A-Za-z0-9._%+-]+@([A-Za-z0-9-]+\.)+([A-Za-z0-9]{2,4}|museum)$/;
Microsoft has listened to the cry for supporting installers (MSI) in Visual Studio and release the Visual Studio Installer Projects Extension. You can now create installers in VS2013, download the extension here from the visualstudiogallery.
try this
Select * From Table
Where field like '%' + ltrValue1 + '%'
And field like '%' + ltrValue2 + '%'
... etc.
and be prepared for a table scan as this functionality cannot use any existing indices
This works with me :
1- select the cells which shall be be affected by the drop down list .
2- home -> conditional formating -> new rule .
3- format only cells that contain .
4- in format only cells with ... select specific text , in formatting rule "= select Elementary from your drop down list"
if drop list in another sheet then when select Elementary we see "=Sheet3!$F$2" in the new rule , with your own sheet and cell number.
5- format -> fill -> select color -> ok.
6-ok .
do the same for each element in drop down list then you will see the magic !
a cheap and nasty would be:
jQuery("#myDiv").html().replace("<br>", "\n").replace("<br />", "\n")
EDIT
jQuery("#myTextArea").val(
jQuery("#myDiv").html()
.replace(/\<br\>/g, "\n")
.replace(/\<br \/\>/g, "\n")
);
Also created a jsfiddle if needed: http://jsfiddle.net/2D3xx/
To see the current locale information use locale
command. Below is an example on RHEL 7.8
[usr@host ~]$ locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
I think this should help. Trick is to bind the contextmenu event.
<script type="text/javascript" language="javascript">
$(function() {
$(this).bind("contextmenu", function(e) {
e.preventDefault();
});
});
</script>
It is surprisingly simple...
Code behind:
// Here's your object that you'll create a list of
private class Products
{
public string ProductName { get; set; }
public string ProductDescription { get; set; }
public string ProductPrice { get; set; }
}
// Here you pass in the List of Products
private void BindItemsInCart(List<Products> ListOfSelectedProducts)
{
// The the LIST as the DataSource
this.rptItemsInCart.DataSource = ListOfSelectedProducts;
// Then bind the repeater
// The public properties become the columns of your repeater
this.rptItemsInCart.DataBind();
}
ASPX code:
<asp:Repeater ID="rptItemsInCart" runat="server">
<HeaderTemplate>
<table>
<thead>
<tr>
<th>Product Name</th>
<th>Product Description</th>
<th>Product Price</th>
</tr>
</thead>
<tbody>
</HeaderTemplate>
<ItemTemplate>
<tr>
<td><%# Eval("ProductName") %></td>
<td><%# Eval("ProductDescription")%></td>
<td><%# Eval("ProductPrice")%></td>
</tr>
</ItemTemplate>
<FooterTemplate>
</tbody>
</table>
</FooterTemplate>
</asp:Repeater>
I hope this helps!
I have done it this way (example):
String query="SELECT count(t1.id) from t1, t2 where t1.id=t2.id and t2.email='"[email protected]"'";
int count=0;
try {
ResultSet rs = DatabaseService.statementDataBase().executeQuery(query);
while(rs.next())
count=rs.getInt(1);
} catch (SQLException e) {
e.printStackTrace();
} finally {
//...
}
Single quote must be there, since date converted to character.
Select employee_id, count(*) From Employee Where to_char(employee_date_hired, 'DD-MON-YY') > '31-DEC-95';
You can try this:
public static <T> T coalesce(T... t) {
return Stream.of(t).filter(Objects::nonNull).findFirst().orElse(null);
}
Based on this response
I think you want something along the line of:
Parent:
<Editor name={this.state.fileData} />
Editor:
var Editor = React.createClass({
displayName: 'Editor',
propTypes: {
name: React.PropTypes.string.isRequired
},
getInitialState: function() {
return {
value: this.props.name
};
},
handleChange: function(event) {
this.setState({value: event.target.value});
},
render: function() {
return (
<form id="noter-save-form" method="POST">
<textarea id="noter-text-area" name="textarea" value={this.state.value} onChange={this.handleChange} />
<input type="submit" value="Save" />
</form>
);
}
});
This is basically a direct copy of the example provided on https://facebook.github.io/react/docs/forms.html
Update for React 16.8:
import React, { useState } from 'react';
const Editor = (props) => {
const [value, setValue] = useState(props.name);
const handleChange = (event) => {
setValue(event.target.value);
};
return (
<form id="noter-save-form" method="POST">
<textarea id="noter-text-area" name="textarea" value={value} onChange={handleChange} />
<input type="submit" value="Save" />
</form>
);
}
Editor.propTypes = {
name: PropTypes.string.isRequired
};
Do you want to get the number of rows?
SELECT columnName, COUNT(*) AS row_count
FROM eventsTable
WHERE columnName = 'Business'
GROUP BY columnName
code below allows user to input items until they press enter key to stop:
In [1]: items=[]
...: i=0
...: while 1:
...: i+=1
...: item=input('Enter item %d: '%i)
...: if item=='':
...: break
...: items.append(item)
...: print(items)
...:
Enter item 1: apple
Enter item 2: pear
Enter item 3: #press enter here
['apple', 'pear']
In [2]:
I've found my own solution.
Download FreeDOS from here: http://chtaube.eu/computers/freedos/bootable-usb/
Then using my Counter.exe file (which basically generates a Counter.txt file and increments the number inside every time it's being called), I can assign the value of the number to a variable using:
Set /P Variable =< Counter.txt
Then, I can check if it has run 250 cycles by doing:
if %variable%==250 echo PASS
BTW, I still can't use Set /A since FreeDOS doesn't support this command, but at least it supports the Set /P command.
You can loop through the cells of any column in a table by knowing just its name and not its position. If the table is in sheet1 of the workbook:
Dim rngCol as Range
Dim cl as Range
Set rngCol = Sheet1.Range("TableName[ColumnName]")
For Each cl in rngCol
cl.Value = "PHEV"
Next cl
The code above will loop through the data values only, excluding the header row and the totals row. It is not necessary to specify the number of rows in the table.
Use this to find the location of any column in a table by its column name:
Dim colNum as Long
colNum = Range("TableName[Column name to search for]").Column
This returns the numeric position of a column in the table.
here is another function to format xml
function formatXml(xml){
var out = "";
var tab = " ";
var indent = 0;
var inClosingTag=false;
var dent=function(no){
out += "\n";
for(var i=0; i < no; i++)
out+=tab;
}
for (var i=0; i < xml.length; i++) {
var c = xml.charAt(i);
if(c=='<'){
// handle </
if(xml.charAt(i+1) == '/'){
inClosingTag = true;
dent(--indent);
}
out+=c;
}else if(c=='>'){
out+=c;
// handle />
if(xml.charAt(i-1) == '/'){
out+="\n";
//dent(--indent)
}else{
if(!inClosingTag)
dent(++indent);
else{
out+="\n";
inClosingTag=false;
}
}
}else{
out+=c;
}
}
return out;
}
Does your dump contain features that are not supported in your version of MySQL? You can also try to remove the starting (and ending) MySQL commented SET-statements.
I don't know if your dump comes from a Linux version of MySQL (line endings)?
The answer of Shyam was right. I already faced with this issue before. It's not a problem, it's a SPRING feature. "Transaction rolled back because it has been marked as rollback-only" is acceptable.
Conclusion
Let's me explain more detail:
Question: How many Transaction we have? Answer: Only one
Because you config the PROPAGATION is PROPAGATION_REQUIRED so that the @Transaction persist() is using the same transaction with the caller-processNextRegistrationMessage(). Actually, when we get an exception, the Spring will set rollBackOnly for the TransactionManager so the Spring will rollback just only one Transaction.
Question: But we have a try-catch outside (), why does it happen this exception? Answer Because of unique Transaction
Go to the catch outside
Spring will set the rollBackOnly to true -> it determine we must
rollback the caller (processNextRegistrationMessage) also.
The persist() will rollback itself first.
Question: Why we change PROPAGATION to REQUIRES_NEW, it works?
Answer: Because now the processNextRegistrationMessage() and persist() are in the different transaction so that they only rollback their transaction.
Thanks
You are inside a namespace
so you should use \Exception
to specify the global namespace:
try {
$this->buildXMLHeader();
} catch (\Exception $e) {
return $e->getMessage();
}
In your code you've used catch (Exception $e)
so Exception
is being searched in/as:
App\Services\PayUService\Exception
Since there is no Exception
class inside App\Services\PayUService
so it's not being triggered. Alternatively, you can use a use
statement at the top of your class like use Exception;
and then you can use catch (Exception $e)
.
Maven uses batch files to do its business. With any batch script, you must call another script using the call
command so it knows to return back to your script after the called script completes. Try prepending call
to all commands.
Another thing you could try is using the start
command which should work similarly.
Firstly update it. If affected row count = 0 then insert it. Its the easiest and suitable for all RDBMS.
If you want to clean the whole database, you can use: python manage.py flush If you want to clean database table of a Django app, you can use: python manage.py migrate appname zero
Microsoft just included an integrated Windows Terminal in Visual Studio version 16.3 Preview 3. Go to Tools > Options > Preview Features, enable the Experimental VS Terminal option and restart Visual Studio.
https://devblogs.microsoft.com/visualstudio/say-hello-to-the-new-visual-studio-terminal/
I came here with a similar question/problem, but I only needed a single value to be stored from the query, not an array/table of results as in the orig post. I was able to use the table method above for a single value, however I have stumbled upon an easier way to store a single value.
declare @myVal int;
set @myVal = isnull((select a from table1), 0);
Make sure to default the value in the isnull statement to a valid type for your variable, in my example the value in table1 that we're storing is an int.
Sorry, the short answer is no. CSS (2.1) will only mark up the elements of a DOM, not their attributes. You'd have to apply a specific class to each input.
Bummer I know, because that would be incredibly useful.
I know you've said you'd prefer CSS over JavaScript, but you should still consider using jQuery. It provides a very clean and elegant way of adding styles to DOM elements based on attributes.
You could take it out of the flow with position:absolute. But the helper_panel will oberlap with other stuff. (I added orders, to see the divs)
<div id="container" style="width: 960px; border:1px solid #f00;">
Text before<br>
<div id="help_panel" style="width: 100%; position:absolute; margin: 0 auto; border:1px solid #0f0;">
Content goes here.
</div>
This is behind the help_penal
</div>
In order to display the results with the line numbers, you might try this
grep -nr "word to search for" /path/to/file/file
The result should be something like this:
linenumber: other data "word to search for" other data
Update:
// use it like this
obj?.a?.lot?.of?.properties
Solution for JavaScript before ECMASCript 2020 or TypeScript older than version 3.7:
A quick workaround is using a try/catch helper function with ES6 arrow function:
function getSafe(fn, defaultVal) {
try {
return fn();
} catch (e) {
return defaultVal;
}
}
// use it like this
console.log(getSafe(() => obj.a.lot.of.properties));
// or add an optional default value
console.log(getSafe(() => obj.a.lot.of.properties, 'nothing'));
_x000D_
mkdir [-switch] foldername
-p
is a switch which is optional, it will create subfolder and parent folder as well even parent folder doesn't exist.
From the man page:
-p, --parents no error if existing, make parent directories as needed
Example:
mkdir -p storage/framework/{sessions,views,cache}
This will create subfolder sessions,views,cache inside framework folder irrespective of 'framework' was available earlier or not.
If you're using Qt Jambi, this should work:
QApplication.closeAllWindows();
I can't find any shortcut to generate javadoc comments. But if you type /**
before the method declaration and press Enter, the javadoc comment block will be generated automatically.
Read this for more information.
import sys
sys.modules.keys()
An approximation of getting all imports for the current module only would be to inspect globals()
for modules:
import types
def imports():
for name, val in globals().items():
if isinstance(val, types.ModuleType):
yield val.__name__
This won't return local imports, or non-module imports like from x import y
. Note that this returns val.__name__
so you get the original module name if you used import module as alias
; yield name instead if you want the alias.
numba
For recursive calculations which are not vectorisable, numba
, which uses JIT-compilation and works with lower level objects, often yields large performance improvements. You need only define a regular for
loop and use the decorator @njit
or (for older versions) @jit(nopython=True)
:
For a reasonable size dataframe, this gives a ~30x performance improvement versus a regular for
loop:
from numba import jit
@jit(nopython=True)
def calculator_nb(a, b, d):
res = np.empty(d.shape)
res[0] = d[0]
for i in range(1, res.shape[0]):
res[i] = res[i-1] * a[i] + b[i]
return res
df['C'] = calculator_nb(*df[list('ABD')].values.T)
n = 10**5
df = pd.concat([df]*n, ignore_index=True)
# benchmarking on Python 3.6.0, Pandas 0.19.2, NumPy 1.11.3, Numba 0.30.1
# calculator() is same as calculator_nb() but without @jit decorator
%timeit calculator_nb(*df[list('ABD')].values.T) # 14.1 ms per loop
%timeit calculator(*df[list('ABD')].values.T) # 444 ms per loop
This is the resolution of the screen that the given component is currently assigned (something like most part of the root window is visible on that screen).
public Rectangle getCurrentScreenBounds(Component component) {
return component.getGraphicsConfiguration().getBounds();
}
Usage:
Rectangle currentScreen = getCurrentScreenBounds(frameOrWhateverComponent);
int currentScreenWidth = currentScreen.width // current screen width
int currentScreenHeight = currentScreen.height // current screen height
// absolute coordinate of current screen > 0 if left of this screen are further screens
int xOfCurrentScreen = currentScreen.x
If you want to respect toolbars, etc. you'll need to calculate with this, too:
GraphicsConfiguration gc = component.getGraphicsConfiguration();
Insets screenInsets = Toolkit.getDefaultToolkit().getScreenInsets(gc);
Prerequisite:
Aria is used to improve the user experience of visually impaired users. Visually impaired users navigate though application using screen reader software like JAWS, NVDA,.. While navigating through the application, screen reader software announces content to users. Aria can be used to add content in the code which helps screen reader users understand role, state, label and purpose of the control
Aria does not change anything visually. (Aria is scared of designers too).
aria-label
aria-label attribute is used to communicate the label to screen reader users. Usually search input field does not have visual label (thanks to designers). aria-label can be used to communicate the label of control to screen reader users
How To Use:
<input type="edit" aria-label="search" placeholder="search">
There is no visual change in application. But screen readers can understand the purpose of control
aria-labelledby
Both aria-label and aria-labelledby is used to communicate the label. But aria-labelledby can be used to reference any label already present in the page whereas aria-label is used to communicate the label which i not displayed visually
Approach 1:
<span id="sd">Search</span>
<input type="text" aria-labelledby="sd">
Approach 2:
aria-labelledby can also be used to combine two labels for screen reader users
<span id="de">Billing Address</span>
<span id="sd">First Name</span>
<input type="text" aria-labelledby="de sd">
Many long (and correct) answers here. But usually you won't do these things manually - at least not when you set up your first projects for development (this is where you usually stumble upon these things). If you use koa for the backend: use koa-cors. Install via npm...
npm install --save koa-cors
...and use it in the code:
const cors = require('koa-cors');
const Koa = require('koa');
const app = new Koa();
app.use(cors());
problem solved.
I'm not sure about linux, but under windows, tightvnc will detect and adapt to resolution changes on the server.
So you should be able to VNC into the workstation, do the equivalent of right-click on desktop, properties, set resolution to whatever, and have your client vnc window resize itself accordingly.
Using Gson Library:
dependencies {
compile 'com.google.code.gson:gson:2.8.2'
}
Store:
Gson gson = new Gson();
//Your json response object value store in json object
JSONObject jsonObject = response.getJSONObject();
//Convert json object to string
String json = gson.toJson(jsonObject);
//Store in the sharedpreference
getPrefs().setUserJson(json);
Retrieve:
String json = getPrefs().getUserJson();
See this. Its also similar problem. Working i tried.
Dont remove dataType: 'JSON',
Note: echo only JSON Formate in PHP file if you use only php echo your ajax code return 200
Using API version 2, which is deprecated, the URL for uploads (of channel UCqAEtEr0A0Eo2IVcuWBfB9g) is:
https://gdata.youtube.com/feeds/users/UCqAEtEr0A0Eo2IVcuWBfB9g/uploads
There is an API version 3.
try this 100% working.
<?php
function dbbackup($host,$user,$pass,$name,$tables=false, $backup_name=false)
{
set_time_limit(3000);
$mysqli = new mysqli($host,$user,$pass,$name);
$mysqli->select_db($name);
$mysqli->query("SET NAMES 'utf8'");
$queryTables = $mysqli->query('SHOW TABLES');
while($row = $queryTables->fetch_row())
{
$target_tables[] = $row[0];
}
if($tables !== false)
{
$target_tables = array_intersect( $target_tables, $tables);
}
$content = "SET SQL_MODE = \"NO_AUTO_VALUE_ON_ZERO\";\r\nSET time_zone = \"+00:00\";\r\n\r\n\r\n/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;\r\n/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;\r\n/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;\r\n/*!40101 SET NAMES utf8 */;\r\n--\r\n-- Database: `".$name."`\r\n--\r\n\r\n\r\n";
foreach($target_tables as $table)
{
if (empty($table))
{
continue;
}
$result = $mysqli->query('SELECT * FROM `'.$table.'`'); $fields_amount=$result->field_count; $rows_num=$mysqli->affected_rows; $res = $mysqli->query('SHOW CREATE TABLE '.$table); $TableMLine=$res->fetch_row();
$content .= "\n\n".$TableMLine[1].";\n\n"; $TableMLine[1]=str_ireplace('CREATE TABLE `','CREATE TABLE IF NOT EXISTS `',$TableMLine[1]);
for ($i = 0, $st_counter = 0; $i < $fields_amount; $i++, $st_counter=0)
{
while($row = $result->fetch_row())
{
if ($st_counter%100 == 0 || $st_counter == 0 )
{
$content .= "\nINSERT INTO ".$table." VALUES";
}
$content .= "\n(";
for($j=0; $j<$fields_amount; $j++)
{
$row[$j] = str_replace("\n","\\n", addslashes($row[$j]) );
if (isset($row[$j]))
{
$content .= '"'.$row[$j].'"' ;
}
else
{
$content .= '""';
}
if ($j<($fields_amount-1))
{
$content.= ',';
}
}
$content .=")";
if ( (($st_counter+1)%100==0 && $st_counter!=0) || $st_counter+1==$rows_num)
{
$content .= ";";
}
else
{
$content .= ",";
}
$st_counter=$st_counter+1;
}
} $content .="\n\n\n";
}
$content .= "\r\n\r\n/*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */;\r\n/*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */;\r\n/*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */;";
$backup_name = $backup_name ? $backup_name : $name.'___('.date('H-i-s').'_'.date('d-m-Y').').sql';
ob_get_clean();
header('Content-Type: application/octet-stream');
header("Content-Transfer-Encoding: Binary");
header('Content-Length: '. (function_exists('mb_strlen') ? mb_strlen($content, '8bit'): strlen($content)) );
header("Content-disposition: attachment; filename=\"".$backup_name."\"");
echo $content; exit;
}
dbbackup("host", "user", "password", "database" );
?>
DataSet ds = new DataSet();
using (OleDbConnection connection = new OleDbConnection(connectionString))
using (OleDbCommand command = new OleDbCommand(query, connection))
using (OleDbDataAdapter adapter = new OleDbDataAdapter(command))
{
adapter.Fill(ds);
}
return ds;
Windows 10: Create a shortcut with this destination:
%windir%\system32\cmd.exe /c "start microsoft-edge:https://twitter.com"
X <- data.frame(Variable1=c(11,14,12,15),Variable2=c(2,3,1,4))
> X
Variable1 Variable2
1 11 2
2 14 3
3 12 1
4 15 4
> X[X$Variable1!=11 & X$Variable1!=12, ]
Variable1 Variable2
2 14 3
4 15 4
> X[ ! X$Variable1 %in% c(11,12), ]
Variable1 Variable2
2 14 3
4 15 4
You can functionalize this however you like.
For the record and Google search users, If you are a .NET Core developer, you should set the content-types manually, because their default value is null or empty:
var provider = new FileExtensionContentTypeProvider();
app.UseStaticFiles(new StaticFileOptions
{
ContentTypeProvider = provider
});
I use CocoaPods and the Swift class from my library couldn't be located from the Objective-C code in the example app because it's project and target were named the same as the library, so I had to remove the Objective-C Generated Interface Name
values so they didn't conflict with the ones from the library.
You can run node.js server on a typical shared hosting with Linux, Apache and PHP (LAMP). I have successfully installed it, even with NPM, Express and Grunt working fine. Follow the steps:
1) Create a new PHP file on the server with the following code and run it:
<?php
//Download and extract the latest node
exec('curl http://nodejs.org/dist/latest/node-v0.10.33-linux-x86.tar.gz | tar xz');
//Rename the folder for simplicity
exec('mv node-v0.10.33-linux-x86 node');
2) The same way install your node app, e.g. jt-js-sample, using npm:
<?php
exec('node/bin/npm install jt-js-sample');
3) Run the node app from PHP:
<?php
//Choose JS file to run
$file = 'node_modules/jt-js-sample/index.js';
//Spawn node server in the background and return its pid
$pid = exec('PORT=49999 node/bin/node ' . $file . ' >/dev/null 2>&1 & echo $!');
//Wait for node to start up
usleep(500000);
//Connect to node server using cURL
$curl = curl_init('http://127.0.0.1:49999/');
curl_setopt($curl, CURLOPT_HEADER, 1);
curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1);
//Get the full response
$resp = curl_exec($curl);
if($resp === false) {
//If couldn't connect, try increasing usleep
echo 'Error: ' . curl_error($curl);
} else {
//Split response headers and body
list($head, $body) = explode("\r\n\r\n", $resp, 2);
$headarr = explode("\n", $head);
//Print headers
foreach($headarr as $headval) {
header($headval);
}
//Print body
echo $body;
}
//Close connection
curl_close($curl);
//Close node server
exec('kill ' . $pid);
Voila! Have a look at the demo of a node app on PHP shared hosting.
EDIT: I started a Node.php project on GitHub.
I prefer this one, I have tested it and its working
https://github.com/jasonday/printThis
$("#mySelector").printThis();
or
$("#mySelector").printThis({
* debug: false, * show the iframe for debugging
* importCSS: true, * import page CSS
* printContainer: true, * grab outer container as well as the contents of the selector
* loadCSS: "path/to/my.css", * path to additional css file
* pageTitle: "", * add title to print page
* removeInline: false * remove all inline styles from print elements
* });
What about like this?
public bool OptionalOutParamMethod([Optional] ref string pOutParam)
{
return true;
}
You still have to pass a value to the parameter from C# but it is an optional ref param.
I have encountered this one too and this is my solution.
If you are encountering an invalid json object exception when parsing data, even though you know that your json string is correct, stringify the data you received in your ajax code before parsing it to JSON:
$.post(CONTEXT+"servlet/capture",{
yesTransactionId : yesTransactionId,
productOfferId : productOfferId
},
function(data){
try{
var trimData = $.trim(JSON.stringify(data));
var obj = $.parseJSON(trimData);
if(obj.success == 'true'){
//some codes ...
File » Import » Maven » Existing Maven Project » Next
http://www.websparrow.org/misc/how-to-import-maven-project-in-eclipse
Collections.synchronizedMap() method synchronizes all the methods of the HashMap and effectively reduces it to a data structure where one thread can enter at a time because it locks every method on a common lock.
In ConcurrentHashMap synchronization is done a little differently. Rather than locking every method on a common lock, ConcurrentHashMap uses separate lock for separate buckets thus locking only a portion of the Map. By default there are 16 buckets and also separate locks for separate buckets. So the default concurrency level is 16. That means theoretically any given time 16 threads can access ConcurrentHashMap if they all are going to separate buckets.
One pattern to look for is a recursion call at the end of the function (so called tail-recursion). This can easily be replaced with a while. For example, the function foo:
void foo(Node* node)
{
if(node == NULL)
return;
// Do something with node...
foo(node->left);
foo(node->right);
}
ends with a call to foo. This can be replaced with:
void foo(Node* node)
{
while(node != NULL)
{
// Do something with node...
foo(node->left);
node = node->right;
}
}
which eliminates the second recursive call.
Technique 2:
DECLARE @p_date DATETIME
SET @p_date = CONVERT( DATETIME, '14 AUG 2008', 106 )
SELECT *
FROM table1
WHERE DATEDIFF( d, column_datetime, @p_date ) = 0
If the column_datetime field is not indexed, and is unlikely to be (or the index is unlikely to be used) then using DATEDIFF() is shorter.
as @Jérémy Reynaud pointing out, as described in this answer, the safest way to set the left drawable without changing the values of the other drawables (top, right, and bottom) is by using the previous values from the button with setCompoundDrawablesWithIntrinsicBounds:
Drawable leftDrawable = getContext().getResources()
.getDrawable(R.drawable.yourdrawable);
// Or use ContextCompat
// Drawable leftDrawable = ContextCompat.getDrawable(getContext(),
// R.drawable.yourdrawable);
Drawable[] drawables = button.getCompoundDrawables();
button.setCompoundDrawablesWithIntrinsicBounds(leftDrawable,drawables[1],
drawables[2], drawables[3]);
So all your previous drawable will be preserved.
it is not possible to do using only html
One technique I think is a little easier and that hasn't been mentioned before here:
var asdf = new [] {
(Age: 1, Name: "cow"),
(Age: 2, Name: "bird")
}.ToList();
I think that's a little cleaner than:
var asdf = new List<Tuple<int, string>> {
(Age: 1, Name: "cow"),
(Age: 2, Name: "bird")
};
You can call a stored procedure from another stored procedure by using the EXECUTE command.
Say your procedure is X. Then in X you can use
EXECUTE PROCEDURE Y () RETURNING_VALUES RESULT;"
Firstly, we have to differentiate JWT and OAuth. Basically, JWT is a token format. OAuth is an authorization protocol that can use JWT as a token. OAuth uses server-side and client-side storage. If you want to do real logout you must go with OAuth2. Authentication with JWT token can not logout actually. Because you don't have an Authentication Server that keeps track of tokens. If you want to provide an API to 3rd party clients, you must use OAuth2 also. OAuth2 is very flexible. JWT implementation is very easy and does not take long to implement. If your application needs this sort of flexibility, you should go with OAuth2. But if you don't need this use-case scenario, implementing OAuth2 is a waste of time.
XSRF token is always sent to the client in every response header. It does not matter if a CSRF token is sent in a JWT token or not, because the CSRF token is secured with itself. Therefore sending CSRF token in JWT is unnecessary.
If you're looking for a shortcut for writing out all of your selectors, then a CSS Preprocessor (Sass, LESS, Stylus, etc.) can do what you're looking for. However, the generated styles must be valid CSS.
Sass:
#applyCSS {
.ui-bar-a {
color: blue;
}
.ui-bar-a .ui-link-inherit {
color: orange;
}
background: #CCC;
}
Generated CSS:
#applyCSS {
background: #CCC;
}
#applyCSS .ui-bar-a {
color: blue;
}
#applyCSS .ui-bar-a .ui-link-inherit {
color: orange;
}
As from C++11 you can use numeric_limits<double>::lowest()
.
According to the standard, it returns exactly what you're looking for:
A finite value x such that there is no other finite value y where
y < x
.
Meaningful for all specializations in whichis_bounded != false
.
There are many answers going for -std::numeric_limits<double>::max()
.
Fortunately, they will work well in most of the cases. Floating point encoding schemes decompose a number in a mantissa and an exponent and most of them (e.g. the popular IEEE-754) use a distinct sign bit, which doesn't belong to the mantissa. This allows to transform the largest positive in the smallest negative just by flipping the sign:
The standard doesn't impose any floating point standard.
I agree that my argument is a little bit theoretic, but suppose that some excentric compiler maker would use a revolutionary encoding scheme with a mantissa encoded in some variations of a two's complement. Two's complement encoding are not symmetric. for example for a signed 8 bit char the maximum positive is 127, but the minimum negative is -128. So we could imagine some floating point encoding show similar asymmetric behavior.
I'm not aware of any encoding scheme like that, but the point is that the standard doesn't guarantee that the sign flipping yields the intended result. So this popular answer (sorry guys !) can't be considered as fully portable standard solution ! /* at least not if you didn't assert that numeric_limits<double>::is_iec559
is true */
Take a look at cat /proc/stat
grep 'cpu ' /proc/stat | awk '{usage=($2+$4)*100/($2+$4+$5)} END {print usage "%"}'
EDIT please read comments before copy-paste this or using this for any serious work. This was not tested nor used, it's an idea for people who do not want to install a utility or for something that works in any distribution. Some people think you can "apt-get install" anything.
NOTE: this is not the current CPU usage, but the overall CPU usage in all the cores since the system bootup. This could be very different from the current CPU usage. To get the current value top (or similar tool) must be used.
Current CPU usage can be potentially calculated with:
awk '{u=$2+$4; t=$2+$4+$5; if (NR==1){u1=u; t1=t;} else print ($2+$4-u1) * 100 / (t-t1) "%"; }' \
<(grep 'cpu ' /proc/stat) <(sleep 1;grep 'cpu ' /proc/stat)
If you are on a windows machine, there won't be any problems with uploading or writing to the specified folder path, except the syntactical errors.
But in case of Linux users, there is a workaround to this problem, even if there are no syntactical errors visible.
First of all, I am assuming that you are using this in a Linux environment and you need to upload something to your project folder in the public directory.
Even if you are having the write and read access to the project folder, PHP is not handled by the end user. It is and can be handled by a www-data
user, or group.
So in order to make this www-data
get access
first type in;
sudo chgrp "www-data" your_project_folder
once its done, if there is no write access to the following as well;
sudo chown g+w your_project_folder
That will do the trick in Linux.
Please, not that this is done in a Linux environment, with phpmyadmin, and mysql running.
You should iterate over the keys and get the values using square brackets.
See: How do I enumerate the properties of a javascript object?
EDIT: Obviously, this makes the question a duplicate.
As of C++17 there's also std::from_chars. The following function takes a string of hex characters and returns a vector of T:
#include <charconv>
template<typename T>
std::vector<T> hexstr_to_vec(const std::string& str, unsigned char chars_per_num = 2)
{
std::vector<T> out(str.size() / chars_per_num, 0);
T value;
for (int i = 0; i < str.size() / chars_per_num; i++) {
std::from_chars<T>(
str.data() + (i * chars_per_num),
str.data() + (i * chars_per_num) + chars_per_num,
value,
16
);
out[i] = value;
}
return out;
}
All you need is to make an ajax request to your pythoncode. You can do this with jquery http://api.jquery.com/jQuery.ajax/, or use just javascript
$.ajax({
type: "POST",
url: "~/pythoncode.py",
data: { param: text}
}).done(function( o ) {
// do something
});
Here's my code:
#include <iostream>
#include <vector>
#include <algorithm>
#include <cmath>
using namespace std;
#define pii pair<int, int>
#define MAX 46656
#define LMT 216
#define LEN 4830
#define RNG 100032
unsigned base[MAX / 64], segment[RNG / 64], primes[LEN];
#define sq(x) ((x)*(x))
#define mset(x,v) memset(x,v,sizeof(x))
#define chkC(x,n) (x[n>>6]&(1<<((n>>1)&31)))
#define setC(x,n) (x[n>>6]|=(1<<((n>>1)&31)))
// http://zobayer.blogspot.com/2009/09/segmented-sieve.html
void sieve()
{
unsigned i, j, k;
for (i = 3; i<LMT; i += 2)
if (!chkC(base, i))
for (j = i*i, k = i << 1; j<MAX; j += k)
setC(base, j);
primes[0] = 2;
for (i = 3, j = 1; i<MAX; i += 2)
if (!chkC(base, i))
primes[j++] = i;
}
//http://www.geeksforgeeks.org/print-all-prime-factors-of-a-given-number/
vector <pii> factors;
void primeFactors(int num)
{
int expo = 0;
for (int i = 0; primes[i] <= sqrt(num); i++)
{
expo = 0;
int prime = primes[i];
while (num % prime == 0){
expo++;
num = num / prime;
}
if (expo>0)
factors.push_back(make_pair(prime, expo));
}
if ( num >= 2)
factors.push_back(make_pair(num, 1));
}
vector <int> divisors;
void setDivisors(int n, int i) {
int j, x, k;
for (j = i; j<factors.size(); j++) {
x = factors[j].first * n;
for (k = 0; k<factors[j].second; k++) {
divisors.push_back(x);
setDivisors(x, j + 1);
x *= factors[j].first;
}
}
}
int main() {
sieve();
int n, x, i;
cin >> n;
for (int i = 0; i < n; i++) {
cin >> x;
primeFactors(x);
setDivisors(1, 0);
divisors.push_back(1);
sort(divisors.begin(), divisors.end());
cout << divisors.size() << "\n";
for (int j = 0; j < divisors.size(); j++) {
cout << divisors[j] << " ";
}
cout << "\n";
divisors.clear();
factors.clear();
}
}
The first part, sieve() is used to find the prime numbers and put them in primes[] array. Follow the link to find more about that code (bitwise sieve).
The second part primeFactors(x) takes an integer (x) as input and finds out its prime factors and corresponding exponent, and puts them in vector factors[]. For example, primeFactors(12) will populate factors[] in this way:
factors[0].first=2, factors[0].second=2
factors[1].first=3, factors[1].second=1
as 12 = 2^2 * 3^1
The third part setDivisors() recursively calls itself to calculate all the divisors of x, using the vector factors[] and puts them in vector divisors[].
It can calculate divisors of any number which fits in int. Also it is quite fast.
I used to get the same problem, but solved it by pointing to the right jre used for the project.
Right click on the project properties java builpath see the jre selected edit it select alternate jre installed jre select the right one ok After changing right click on project>maven>update project
Hope it helps. Attaching screen shot.
You can try:
<VirtualHost myvhost:80>
php_value error_log "/var/log/httpd/vhost_php_error_log"
</Virtual Host>
But I'm not sure if it is going to work. I tried on my sites with no success.
For me it was a table name upper/lower case issue. I had to make sure that table case name matched in a delete query, table notifications
was not the same as Notifications
. I fixed it by matching table name case with query and what MySQLWorkbench reported.
What is wierd is that this error showed up in a worked sql statement. Don't know what caused this case sensitivity. Perhaps an auto AWS RDS update.
Here's another option for those not using heatmap.2
(aheatmap
is good!)
Make a sequential vector of 100 values from min to max of your input matrix, find value closest to 0 in that, make two vector of colours to and from desired midpoint, combine and use them:
breaks <- seq(from=min(range(inputMatrix)), to=max(range(inputMatrix)), length.out=100)
midpoint <- which.min(abs(breaks - 0))
rampCol1 <- colorRampPalette(c("forestgreen", "darkgreen", "black"))(midpoint)
rampCol2 <- colorRampPalette(c("black", "darkred", "red"))(100-(midpoint+1))
rampCols <- c(rampCol1,rampCol2)
You don't have to simulate it. The second argument to res.send
I believe is the status code. Just pass 404 to that argument.
Let me clarify that: Per the documentation on expressjs.org it seems as though any number passed to res.send()
will be interpreted as the status code. So technically you could get away with:
res.send(404);
Edit: My bad, I meant res
instead of req
. It should be called on the response
Edit: As of Express 4, the send(status)
method has been deprecated. If you're using Express 4 or later, use: res.sendStatus(404)
instead. (Thanks @badcc for the tip in the comments)
Extending the idea from kjfletch
# This is my humble contribution, extending the idea to serialize
# data from and to tuples, comparison operations and allowing functions
# as default values.
def Struct(*args, **kwargs):
FUNCTIONS = (types.BuiltinFunctionType, types.BuiltinMethodType, \
types.FunctionType, types.MethodType)
def init(self, *iargs, **ikwargs):
"""Asume that unamed args are placed in the same order than
astuple() yields (currently alphabetic order)
"""
kw = list(self.__slots__)
# set the unnamed args
for i in range(len(iargs)):
k = kw.pop(0)
setattr(self, k, iargs[i])
# set the named args
for k, v in ikwargs.items():
setattr(self, k, v)
kw.remove(k)
# set default values
for k in kw:
v = kwargs[k]
if isinstance(v, FUNCTIONS):
v = v()
setattr(self, k, v)
def astuple(self):
return tuple([getattr(self, k) for k in self.__slots__])
def __str__(self):
data = ['{}={}'.format(k, getattr(self, k)) for k in self.__slots__]
return '<{}: {}>'.format(self.__class__.__name__, ', '.join(data))
def __repr__(self):
return str(self)
def __eq__(self, other):
return self.astuple() == other.astuple()
name = kwargs.pop("__name__", "MyStruct")
slots = list(args)
slots.extend(kwargs.keys())
# set non-specific default values to None
kwargs.update(dict((k, None) for k in args))
return type(name, (object,), {
'__init__': init,
'__slots__': tuple(slots),
'astuple': astuple,
'__str__': __str__,
'__repr__': __repr__,
'__eq__': __eq__,
})
Event = Struct('user', 'cmd', \
'arg1', 'arg2', \
date=time.time, \
__name__='Event')
aa = Event('pepe', 77)
print(aa)
raw = aa.astuple()
bb = Event(*raw)
print(bb)
if aa == bb:
print('Are equals')
cc = Event(cmd='foo')
print(cc)
Output:
<Event: user=pepe, cmd=77, arg1=None, arg2=None, date=1550051398.3651814>
<Event: user=pepe, cmd=77, arg1=None, arg2=None, date=1550051398.3651814>
Are equals
<Event: user=None, cmd=foo, arg1=None, arg2=None, date=1550051403.7938335>
What about something like:
Alter Table Products
Add LastUpdate varchar(200) null
Do you need something more complex than this?
def tuple_insert(tup,pos,ele):
tup = tup[:pos]+(ele,)+tup[pos:]
return tup
tuple_insert(tup,pos,9999)
tup: tuple
pos: Position to insert
ele: Element to insert
You might want to try the solution from this O'Reilly article.
The important part are these CSS media queries:
<link rel="stylesheet" media="all and (max-device-width: 480px)" href="iphone.css">
<link rel="stylesheet" media="all and (min-device-width: 481px) and (max-device-width: 1024px) and (orientation:portrait)" href="ipad-portrait.css">
<link rel="stylesheet" media="all and (min-device-width: 481px) and (max-device-width: 1024px) and (orientation:landscape)" href="ipad-landscape.css">
<link rel="stylesheet" media="all and (min-device-width: 1025px)" href="ipad-landscape.css">
I have also used the following to submit a form (without actually submitting it) via Ajax:
jQuery.get("process_form.php"+$("#form_id").serialize(), {},
function() {
alert("Okay!");
});
//Do this
int IS_NULL_PTR(char *k){
memset(&k, k, sizeof k);
if(k) { return 71; } ;
return 72;
}
int PRINT_PTR_SAFE(char *KR){
char *E=KR;;
if (IS_NULL_PTR(KR)==71){
printf("%s\r\n",KR);
} else {
printf("%s","(null)\r\n");
}
}
int main(int argc,char *argv[]){
int i=0;
char *A=malloc(sizeof(char)*9);
;strcpy(A,"hello world");
for (i=((int)(A))-10;i<1e+40;i++){
PRINT_PTR_SAFE(i);
}
}
//Then watch the show!
//Edit as you wish. Just credit me if you really want more of this.
I got same problem lot of time. Check your request url, if you are requesting on local server like 127.1.1/api or 192.168...., try to change it, make sure you are hitting cloud.
What you are looking for is CAGradientLayer
. Every UIView
has a layer - into that layer you can add sublayers, just as you can add subviews. One specific type is the CAGradientLayer
, where you give it an array of colors to gradiate between.
One example is this simple wrapper for a gradient view:
http://oleb.net/blog/2010/04/obgradientview-a-simple-uiview-wrapper-for-cagradientlayer/
Note that you need to include the QuartZCore framework in order to access all of the layer parts of a UIView.
If you look into CREATE PROCEDURE Syntax for latest MySQL version you'll see that procedure parameter can only contain IN/OUT/INOUT specifier, parameter name and type.
So, default values are still unavailable in latest MySQL version.
I had the same issue and solved it with below steps
If you save the Excel file as a CSV format file, you might find that the result is convenient to inserting into a database, though I'm not sure all of the fields would be quoted.
You need to add your tiles into your resource bundle. I mean add all those files to your project make sure to copy all files to project directory option checked.
The issue is with this line
xlo.Worksheets(1).Cells(2, 2) = TextBox1.Text
You have the textbox defined at some other location which you are not using here. Excel is unable to find the textbox object in the current sheet while this textbox was defined in xlw.
Hence replace this with
xlo.Worksheets(1).Cells(2, 2) = worksheets("xlw").TextBox1.Text
I would think it could still be quite RESTful to have query arguments that identify the resource on the URL while keeping the content payload confined to the POST body. This would seem to separate the considerations of "What am I sending?" versus "Who am I sending it to?".
You can get the parameters you are asking for by typing:
dir /?
For the full list, try:
dir /s /b /a:d
An alternative would be to place your regexp in non-capturing parentheses. Then make that expression optional using the ?
qualifier, which will look for 0 (i.e. empty string) or 1 instances of the non-captured group.
For example:
/(?: some regexp )?/
In your case the regular expression would look something like this:
/^(?:[\w\.\-]+@([\w\-]+\.)+[a-zA-Z]+)?$/
No |
"or" operator necessary!
Here is the Mozilla documentation for JavaScript Regular Expression syntax.
UrlImageViewHelper will fill an ImageView with an image that is found at a URL. UrlImageViewHelper will automatically download, save, and cache all the image urls the BitmapDrawables. Duplicate urls will not be loaded into memory twice. Bitmap memory is managed by using a weak reference hash table, so as soon as the image is no longer used by you, it will be garbage collected automatically.
UrlImageViewHelper.setUrlDrawable(imageView, "http://example.com/image.png");
There is a better algorithm, which needs at most 6 iterations to converge to maximum precision for double numbers:
#include <math.h>
double sqrt(double x) {
if (x <= 0)
return 0; // if negative number throw an exception?
int exp = 0;
x = frexp(x, &exp); // extract binary exponent from x
if (exp & 1) { // we want exponent to be even
exp--;
x *= 2;
}
double y = (1+x)/2; // first approximation
double z = 0;
while (y != z) { // yes, we CAN compare doubles here!
z = y;
y = (y + x/y) / 2;
}
return ldexp(y, exp/2); // multiply answer by 2^(exp/2)
}
Algorithm starts with 1 as first approximation for square root value.
Then, on each step, it improves next approximation by taking average between current value y
and x/y
. If y
= sqrt(x)
, it will be the same. If y
> sqrt(x)
, then x/y
< sqrt(x)
by about the same amount. In other words, it will converge very fast.
UPDATE: To speed up convergence on very large or very small numbers, changed sqrt()
function to extract binary exponent and compute square root from number in [1, 4)
range. It now needs frexp()
from <math.h>
to get binary exponent, but it is possible to get this exponent by extracting bits from IEEE-754 number format without using frexp()
.
Even if above solutions don't work, check permissions to destination file of aws ec2 instance. May be you can try with- sudo chmod 777 -R destinationFolder/*
In PHPStorm 2016: File > Settings > Editor > General > Appearance > check "Show line numbers"
You can use the "file" command if you actually want to find out information about the file rather than rely on the extensions.
If you feel comfortable with using the extension you can use grep to see if it matches.
In the specific case of the code example from the original question, the
System.out.print("\n");
is there to move to a new line between incrementing i.
So the first print statement prints all of the elements of Grid[0][j]. When the innermost for loop has completed, the "\n" gets printed and then all of the elements of Grid[1][j] are printed on the next line, and this is repeated until you have a 10x10 grid of the elements of the 2-dimensional array, Grid.
According to adb help
:
adb root - restarts the adbd daemon with root permissions
Which indeed resolved the issue for me.
There are 2 steps to resolve this:
Add UseAccessibleHeader="true"
to Gridview tag:
<asp:GridView ID="MyGridView" runat="server" UseAccessibleHeader="true">
Add the following Code to the PreRender
event:
Protected Sub MyGridView_PreRender(sender As Object, e As EventArgs) Handles MyGridView.PreRender
Try
MyGridView.HeaderRow.TableSection = TableRowSection.TableHeader
Catch ex As Exception
End Try
End Sub
Note setting Header Row in DataBound()
works only when the object is databound, any other postback that doesn't databind the gridview will result in the gridview header row style reverting to a standard row again. PreRender works everytime, just make sure you have an error catch for when the gridview is empty.
Assume you stored that dictionary in a variable called values. To get id
in to a variable, do:
idValue = values['criteria'][0]['id']
If that json is in a file, do the following to load it:
import json
jsonFile = open('your_filename.json', 'r')
values = json.load(jsonFile)
jsonFile.close()
If that json is from a URL, do the following to load it:
import urllib, json
f = urllib.urlopen("http://domain/path/jsonPage")
values = json.load(f)
f.close()
To print ALL of the criteria, you could:
for criteria in values['criteria']:
for key, value in criteria.iteritems():
print key, 'is:', value
print ''
Here's the Scalatest page on using the runner and the extended discussion on the -t
and -z
options.
This post shows what commands work for a test file that uses FunSpec
.
Here's the test file:
package com.github.mrpowers.scalatest.example
import org.scalatest.FunSpec
class CardiBSpec extends FunSpec {
describe("realName") {
it("returns her birth name") {
assert(CardiB.realName() === "Belcalis Almanzar")
}
}
describe("iLike") {
it("works with a single argument") {
assert(CardiB.iLike("dollars") === "I like dollars")
}
it("works with multiple arguments") {
assert(CardiB.iLike("dollars", "diamonds") === "I like dollars, diamonds")
}
it("throws an error if an integer argument is supplied") {
assertThrows[java.lang.IllegalArgumentException]{
CardiB.iLike()
}
}
it("does not compile with integer arguments") {
assertDoesNotCompile("""CardiB.iLike(1, 2, 3)""")
}
}
}
This command runs the four tests in the iLike
describe block (from the SBT command line):
testOnly *CardiBSpec -- -z iLike
You can also use quotation marks, so this will also work:
testOnly *CardiBSpec -- -z "iLike"
This will run a single test:
testOnly *CardiBSpec -- -z "works with multiple arguments"
This will run the two tests that start with "works with":
testOnly *CardiBSpec -- -z "works with"
I can't get the -t
option to run any tests in the CardiBSpec
file. This command doesn't run any tests:
testOnly *CardiBSpec -- -t "works with multiple arguments"
Looks like the -t
option works when tests aren't nested in describe
blocks. Let's take a look at another test file:
class CalculatorSpec extends FunSpec {
it("adds two numbers") {
assert(Calculator.addNumbers(3, 4) === 7)
}
}
-t
can be used to run the single test:
testOnly *CalculatorSpec -- -t "adds two numbers"
-z
can also be used to run the single test:
testOnly *CalculatorSpec -- -z "adds two numbers"
See this repo if you'd like to run these examples. You can find more info on running tests here.
Style.css
img#center-img{
display: block;
margin: auto;
}
Html
<html>
<body>
<div>
<img src='pic.png' id='center-img'>
</div>
</body>
</html>
I am a Windows and XAMPP user. What works for me is adding extension=php_pdo_mysql.dll
in both php.ini
of XAMPP and php.ini
in C:\php\php.ini
.
Run this command in your cmd to know where your config file is
php -i | find /i "Configuration File
Late to the party, but for anyone tasked with creating their own or wants to see how this would work, here's the function with an added bonus of rearranging the start-stop values based on the desired increment:
def RANGE(start, stop=None, increment=1):
if stop is None:
stop = start
start = 1
value_list = sorted([start, stop])
if increment == 0:
print('Error! Please enter nonzero increment value!')
else:
value_list = sorted([start, stop])
if increment < 0:
start = value_list[1]
stop = value_list[0]
while start >= stop:
worker = start
start += increment
yield worker
else:
start = value_list[0]
stop = value_list[1]
while start < stop:
worker = start
start += increment
yield worker
Negative increment:
for i in RANGE(1, 10, -1):
print(i)
Or, with start-stop reversed:
for i in RANGE(10, 1, -1):
print(i)
Output:
10
9
8
7
6
5
4
3
2
1
Regular increment:
for i in RANGE(1, 10):
print(i)
Output:
1
2
3
4
5
6
7
8
9
Zero increment:
for i in RANGE(1, 10, 0):
print(i)
Output:
'Error! Please enter nonzero increment value!'
Check this:
The TEXTAREA element creates a multi-line text input control
use google guava !
Iterable<String> fieldsIterable = ...
List<String> fields = Lists.newArrayList(fieldsIterable);
++
NetHogs is probably what you're looking for:
a small 'net top' tool. Instead of breaking the traffic down per protocol or per subnet, like most tools do, it groups bandwidth by process.
NetHogs does not rely on a special kernel module to be loaded. If there's suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this. This makes it easy to identify programs that have gone wild and are suddenly taking up your bandwidth.
Since NetHogs heavily relies on /proc, most features are only available on Linux. NetHogs can be built on Mac OS X and FreeBSD, but it will only show connections, not processes...
Doing Project
-> Clean...
fixed it for me.
My eclipse had stopped working so I cleaned workspace
directory and after I run eclipse when I import the project I had this problem. Other solutions suggested here didn't work.
Try with this:
<android.support.v4.widget.DrawerLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:id="@+id/drawer_layout"
android:fitsSystemWindows="true">
<FrameLayout
android:layout_width="match_parent"
android:layout_height="match_parent">
<!--Main layout and ads-->
<LinearLayout
android:layout_width="match_parent"
android:layout_height="match_parent"
android:orientation="vertical">
<FrameLayout
android:id="@+id/ll_main_hero"
android:layout_width="match_parent"
android:layout_height="0dp"
android:layout_weight="1">
</FrameLayout>
<FrameLayout
android:id="@+id/ll_ads"
android:layout_width="match_parent"
android:layout_height="wrap_content">
<View
android:layout_width="320dp"
android:layout_height="50dp"
android:layout_gravity="center"
android:background="#ff00ff" />
</FrameLayout>
</LinearLayout>
<!--Toolbar-->
<android.support.v7.widget.Toolbar
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:id="@+id/toolbar"
android:elevation="4dp" />
</FrameLayout>
<!--left-->
<ListView
android:layout_width="240dp"
android:layout_height="match_parent"
android:layout_gravity="start"
android:choiceMode="singleChoice"
android:divider="@null"
android:background="@mipmap/layer_image"
android:id="@+id/left_drawer"></ListView>
<!--right-->
<FrameLayout
android:layout_width="240dp"
android:layout_height="match_parent"
android:layout_gravity="right"
android:background="@mipmap/layer_image">
<ImageView
android:layout_width="match_parent"
android:layout_height="match_parent"
android:src="@mipmap/ken2"
android:scaleType="centerCrop" />
</FrameLayout>
style :
<style name="ts_theme_overlay" parent="Theme.AppCompat.Light.NoActionBar">
<item name="colorPrimary">@color/red_A700</item>
<item name="colorPrimaryDark">@color/red1</item>
<item name="android:windowBackground">@color/blue_A400</item>
</style>
Main Activity extends ActionBarActivity
toolBar = (Toolbar) findViewById(R.id.toolbar);
setSupportActionBar(toolBar);
Now you can onCreateOptionsMenu
like as normal ActionBar with ToolBar.
This is my Layout
Hope you understand !have fun !
Yes, it's possible with a bit of tweak. Unfortunately, you still have to have VS 2010 installed.
First, install XNA Game Studio 4.0. The easiest way is to install the Windows Phone SDK 7.1 which contains everything required.
Copy the XNA Game Extension from VS 10 to VS 11 by opening a command prompt 'as administrator' and executing the following (may vary if not x64 computer with defaults paths) :
xcopy /e "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Extensions\Microsoft\XNA Game Studio 4.0" "C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Extensions\Microsoft\XNA Game Studio 4.0"
Run notepad as administrator then open extension.vsixmanifest
in the destination directory just created.
Upgrade the Supported product version to match the new version (or duplicate the whole VisualStudio
element and change the Version
attribute, as @brainslugs83 said in comments):
<SupportedProducts>
<VisualStudio Version="11.0">
<Edition>VSTS</Edition>
<Edition>VSTD</Edition>
<Edition>Pro</Edition>
<Edition>VCSExpress</Edition>
<Edition>VPDExpress</Edition>
</VisualStudio>
</SupportedProducts>
Don't forget to clear/delete your cache in %localappdata%\Microsoft\VisualStudio\12.0\Extensions.
You may have to run the command to tells Visual Studio that new extensions are available. If you see an 'access denied' message, try launching the console as an administrator.
"C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\devenv.exe" /setup
This has been tested for Windows Games, but not WP7 or Xbox games.
[Edit] According Jowsty, this works also for XBox 360 Games.
[Edit for Visual Studio 2013 & Windows 8.1] See here for documentation on installing Windows Phone SDK 7.1 on Windows 8.1. Use VS version number 12.0 in place of 11.0 for all of these steps, and they will still work correctly.
You can try like:
$("#myformid").submit(function(){
//perform anythng
});
Or even you can try like
$(".nextbutton").click(function() {
$('#form1').submit();
});
Check NETFramework of the referred dll & the Project where you are adding the DLL. Ex: DLL ==> supportedRuntime version="v4.0" Project ==> supportedRuntime version="v3.0"
You will get warning icon. Solution : Make dll version consistence across.
It doesn't take the 50% of the whole page is because the "whole page" is only how tall your contents are. Change the enclosing html
and body
to 100%
height and it will work.
html, body{
height: 100%;
}
div{
height: 50%;
}
http://jsfiddle.net/DerekL/5YukJ/1/
^ Your document is only 20px high. 50% of 20px is 10px, and it is not what you expected.
^ Now if you change the height of the document to the height of the whole page (150px), 50% of 150px is 75px, then it will work.
[''.join(i) for i in zip(df["Year"].map(str),df["quarter"])]
or slightly slower but more compact:
df.Year.str.cat(df.quarter)
df['Year'].astype(str) + df['quarter']
UPDATE: Timing graph Pandas 0.23.4
Let's test it on 200K rows DF:
In [250]: df
Out[250]:
Year quarter
0 2014 q1
1 2015 q2
In [251]: df = pd.concat([df] * 10**5)
In [252]: df.shape
Out[252]: (200000, 2)
UPDATE: new timings using Pandas 0.19.0
Timing without CPU/GPU optimization (sorted from fastest to slowest):
In [107]: %timeit df['Year'].astype(str) + df['quarter']
10 loops, best of 3: 131 ms per loop
In [106]: %timeit df['Year'].map(str) + df['quarter']
10 loops, best of 3: 161 ms per loop
In [108]: %timeit df.Year.str.cat(df.quarter)
10 loops, best of 3: 189 ms per loop
In [109]: %timeit df.loc[:, ['Year','quarter']].astype(str).sum(axis=1)
1 loop, best of 3: 567 ms per loop
In [110]: %timeit df[['Year','quarter']].astype(str).sum(axis=1)
1 loop, best of 3: 584 ms per loop
In [111]: %timeit df[['Year','quarter']].apply(lambda x : '{}{}'.format(x[0],x[1]), axis=1)
1 loop, best of 3: 24.7 s per loop
Timing using CPU/GPU optimization:
In [113]: %timeit df['Year'].astype(str) + df['quarter']
10 loops, best of 3: 53.3 ms per loop
In [114]: %timeit df['Year'].map(str) + df['quarter']
10 loops, best of 3: 65.5 ms per loop
In [115]: %timeit df.Year.str.cat(df.quarter)
10 loops, best of 3: 79.9 ms per loop
In [116]: %timeit df.loc[:, ['Year','quarter']].astype(str).sum(axis=1)
1 loop, best of 3: 230 ms per loop
In [117]: %timeit df[['Year','quarter']].astype(str).sum(axis=1)
1 loop, best of 3: 230 ms per loop
In [118]: %timeit df[['Year','quarter']].apply(lambda x : '{}{}'.format(x[0],x[1]), axis=1)
1 loop, best of 3: 9.38 s per loop
Answer contribution by @anton-vbr
Change the rule on your <a>
element from:
.navigation ul a {
color: #000;
display: block;
padding: 0 65px 0 0;
text-decoration: none;
}?
to
.navigation ul a {
color: #000;
display: block;
padding: 0 65px 0 0;
text-decoration: none;
width:100%;
text-align:center;
}?
Just add two new rules (width:100%;
and text-align:center;
). You need to make the anchor expand to take up the full width of the list item and then text-align center it.
Thinking of a string as a set of characters, in mathematics the empty set is always a subset of any set.
To find files accessed 1, 2, or 3 minutes ago use -3
find . -cmin -3
As shown in the above image, if the password is encrypted it is always a hidden secret where someone can extract the plain text password. However when password is hashed, you are relaxed as there is hardly any method of recovering the password from the hash value.
Extracted from Encrypted vs Hashed Passwords - Which is better?
Plain text passwords can be encrypted using symmetric encryption algorithms like DES, AES or with any other algorithms and be stored inside the database. At the authentication (confirming the identity with user name and password), application will decrypt the encrypted password stored in database and compare with user provided password for equality. In this type of an password handling approach, even if someone get access to database tables the passwords will not be simply reusable. However there is a bad news in this approach as well. If somehow someone obtain the cryptographic algorithm along with the key used by your application, he/she will be able to view all the user passwords stored in your database by decryption. "This is the best option I got", a software developer may scream, but is there a better way?
Yes there is, may be you have missed the point here. Did you notice that there is no requirement to decrypt and compare? If there is one-way-only conversion approach where the password can be converted into some converted-word, but the reverse operation (generation of password from converted-word) is impossible. Now even if someone gets access to the database, there is no way that the passwords be reproduced or extracted using the converted-words. In this approach, there will be hardly anyway that some could know your users' top secret passwords; and this will protect the users using the same password across multiple applications. What algorithms can be used for this approach?
If you want to loop over what you "find", you should use this:
find . -type f -name '*.*' -print0 | while IFS= read -r -d '' file; do
printf '%s\n' "$file"
done
Source: https://askubuntu.com/questions/343727/filenames-with-spaces-breaking-for-loop-find-command
as noted here, this is what worked best for me:
sudo apt-get install python3 python3-pip python3-setuptools
sudo update-alternatives --install /usr/bin/python python /usr/bin/python3 10
$rootbeer = (float) $InvoicedUnits;
Should do it for you. Check out Type-Juggling. You should also read String conversion to Numbers.
Algorithm:
In C#:
void Main()
{
var set = new [] {"A", "B", "C", "D" }; //, "E", "F", "G", "H", "I", "J" };
var kElement = 2;
for(var i = 1; i < Math.Pow(2, set.Length); i++) {
var result = Convert.ToString(i, 2).PadLeft(set.Length, '0');
var cnt = Regex.Matches(Regex.Escape(result), "1").Count;
if (cnt == kElement) {
for(int j = 0; j < set.Length; j++)
if ( Char.GetNumericValue(result[j]) == 1)
Console.Write(set[j]);
Console.WriteLine();
}
}
}
Why does it work?
There is a bijection between the subsets of an n-element set and n-bit sequences.
That means we can figure out how many subsets there are by counting sequences.
e.g., the four element set below can be represented by {0,1} X {0, 1} X {0, 1} X {0, 1} (or 2^4) different sequences.
So - all we have to do is count from 1 to 2^n to find all the combinations. (We ignore the empty set.) Next, translate the digits to their binary representation. Then substitute elements of your set for 'on' bits.
If you want only k element results, only print when k bits are 'on'.
(If you want all subsets instead of k length subsets, remove the cnt/kElement part.)
(For proof, see MIT free courseware Mathematics for Computer Science, Lehman et al, section 11.2.2. https://ocw.mit.edu/courses/electrical-engineering-and-computer-science/6-042j-mathematics-for-computer-science-fall-2010/readings/ )
I was having this issue in a WebForms application, the error clearly says that A default document is not configured
and it was true in my case, the default document was not configured. What worked for me is that I clicked on my site and on the middle pane in iis there is an option named Default Document
. In the Default Document
you have to check if the default page of the application exists or not.
The default page of my application was index.aspx and it wasnt present on iis Default Document
window. So I made a new entry of index.aspx and it started working.
Had the same error but with a different scenario. I had my state as
this.state = {
date: new Date()
}
so when I was asking it in my Class Component I had
p>Date = {this.state.date}</p>
Instead of
p>Date = {this.state.date.toLocaleDateString()}</p>
Since git 1.8 you can do
git submodule update --remote --merge
This will update the submodule to the latest remote commit. You will then need to commit the change so the gitlink in the parent repository is updated
git commit
And then push the changes as without this, the SHA-1 identity the pointing to the submodule won't be updated and so the change won't be visible to anyone else.
No need to create overload methods, just use one single method with params as shown below
// Call params method with one to four integer constant parameters.
//
int sum0 = addTwoEach();
int sum1 = addTwoEach(1);
int sum2 = addTwoEach(1, 2);
int sum3 = addTwoEach(3, 3, 3);
int sum4 = addTwoEach(2, 2, 2, 2);
Just try the following coding...very simple to generate CSV with the values of HTML Tables. No browser issues will come
<!DOCTYPE html>
<html>
<head>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.11.3/jquery.min.js"></script>
<script src="http://www.csvscript.com/dev/html5csv.js"></script>
<script>
$(document).ready(function() {
$('table').each(function() {
var $table = $(this);
var $button = $("<button type='button'>");
$button.text("Export to CSV");
$button.insertAfter($table);
$button.click(function() {
CSV.begin('table').download('Export.csv').go();
});
});
})
</script>
</head>
<body>
<div id='PrintDiv'>
<table style="width:100%">
<tr>
<td>Jill</td>
<td>Smith</td>
<td>50</td>
</tr>
<tr>
<td>Eve</td>
<td>Jackson</td>
<td>94</td>
</tr>
<tr>
<td>John</td>
<td>Doe</td>
<td>80</td>
</tr>
</table>
</div>
</body>
</html>
Java 8 provides Byte.toUnsignedInt
to convert byte
to int
by unsigned conversion. In Oracle's JDK this is simply implemented as return ((int) x) & 0xff;
because HotSpot already understands how to optimize this pattern, but it could be intrinsified on other VMs. More importantly, no prior knowledge is needed to understand what a call to toUnsignedInt(foo)
does.
In total, Java 8 provides methods to convert byte
and short
to unsigned int
and long
, and int
to unsigned long
. A method to convert byte
to unsigned short
was deliberately omitted because the JVM only provides arithmetic on int
and long
anyway.
To convert an int back to a byte, just use a cast: (byte)someInt
. The resulting narrowing primitive conversion will discard all but the last 8 bits.
On Android >=6.0, We have to request permission runtime.
Step1: add in AndroidManifest.xml file
<uses-permission android:name="android.permission.READ_PHONE_STATE"/>
Step2: Request permission.
int permissionCheck = ContextCompat.checkSelfPermission(this, Manifest.permission.READ_PHONE_STATE);
if (permissionCheck != PackageManager.PERMISSION_GRANTED) {
ActivityCompat.requestPermissions(this, new String[]{Manifest.permission.READ_PHONE_STATE}, REQUEST_READ_PHONE_STATE);
} else {
//TODO
}
Step3: Handle callback when you request permission.
@Override
public void onRequestPermissionsResult(int requestCode, String permissions[], int[] grantResults) {
switch (requestCode) {
case REQUEST_READ_PHONE_STATE:
if ((grantResults.length > 0) && (grantResults[0] == PackageManager.PERMISSION_GRANTED)) {
//TODO
}
break;
default:
break;
}
}
Edit: Read official guide here Requesting Permissions at Run Time
You can use the LocalForward
directive in your host yam
section of ~/.ssh/config
:
LocalForward 5901 computer.myHost.edu:5901
Gson gson = new Gson();
Type listType = new TypeToken<List<Data>>() {}.getType();
List<Data> cartProductList = gson.fromJson(response.body().get("data"), listType);
Toast.makeText(getContext(), ""+cartProductList.get(0).getCity(), Toast.LENGTH_SHORT).show();
TL;DR:
socket.send(data, callback)
is essentially equivalent to calling socket.emit('message', JSON.stringify(data), callback)
Without looking at the source code, I would assume that the send function is more efficient edit: for sending string messages, at least?
So yeah basically emit allows you to send objects, which is very handy.
Take this example with socket.emit
:
sendMessage: function(type, message) {
socket.emit('message', {
type: type,
message: message
});
}
and for those keeping score at home, here is what it looks like using socket.send
:
sendMessage: function(type, message) {
socket.send(JSON.stringify({
type: type,
message: message
}));
}
EventArgs e
is a parameter called e that contains the event data, see the EventArgs MSDN page for more information.
Object Sender
is a parameter called Sender that contains a reference to the control/object that raised the event.
Event Arg Class: http://msdn.microsoft.com/en-us/library/system.eventargs.aspx
Example:
protected void btn_Click (object sender, EventArgs e){
Button btn = sender as Button;
btn.Text = "clicked!";
}
Edit: When Button is clicked, the btn_Click event handler will be fired. The "object sender" portion will be a reference to the button which was clicked
Yes, you can store any object (I assume you are using ASP.NET with default settings, which is in-process session state):
Session["test"] = myList;
You should cast it back to the original type for use:
var list = (List<int>)Session["test"];
// list.Add(something);
As Richard points out, you should take extra care if you are using other session state modes (e.g. SQL Server) that require objects to be serializable.
I'm late to the party but I found some useful instructions in github help page and I wanted to share them here.
Sometimes, Git can't make your change to a remote repository without losing commits. When this happens, your push is refused.
If another person has pushed to the same branch as you, Git won't be able to push your changes:
$ git push origin master
To https://github.com/USERNAME/REPOSITORY.git
! [rejected] master -> master (non-fast-forward)
error: failed to push some refs to 'https://github.com/USERNAME/REPOSITORY.git'
To prevent you from losing history, non-fast-forward updates were rejected
Merge the remote changes (e.g. 'git pull') before pushing again. See the
'Note about fast-forwards' section of 'git push --help' for details.
You can fix this by fetching and merging the changes made on the remote branch with the changes that you have made locally:
$ git fetch origin
# Fetches updates made to an online repository
$ git merge origin YOUR_BRANCH_NAME
# Merges updates made online with your local work
Or, you can simply use git pull
to perform both commands at once:
$ git pull origin YOUR_BRANCH_NAME
# Grabs online updates and merges them with your local work
You can always take a look at the .size
attribute. It is defined as an integer, and is zero (0
) when there are no elements in the array:
import numpy as np
a = np.array([])
if a.size == 0:
# Do something when `a` is empty
Drop database exist in all versions of MySQL. But if you want to keep the table structure, here is an idea
mysqldump --no-data --add-drop-database --add-drop-table -hHOSTNAME -uUSERNAME -p > dump.sql
This is a program, not a mysql command
Then, log into mysql and
source dump.sql;
Try to set response dataType property directly:
dataType: 'text'
and put
die('');
in the end of your php file. You've got error callback cause jquery cannot parse your response. In anyway, you may use a "complete:" callback, just to make sure your request has been processed.
I don't think there is a way to tell which program to use from just the .db extension. It could even be an encrypted database which can't be opened. You can MS Access, or a sqlite manager.
Edit: Try to rename the file to .txt and open it with a text editor. The first couple of words in the file could tell you the DB Type.
If it is a SQLite database, it will start with "SQLite format 3"
In order of preference:
{{ var|e('html_attr') }}
htmlentities($var, ENT_QUOTES | ENT_HTML5, $charset)
and make sure the rest of your document uses the same character set as $charset
. In most cases, 'UTF-8'
is the desired character set.Also, make sure you escape on output, not on input.
On linux command line, you can simply execute:
curl -H "Content-Type: text/xml; charset=utf-8" -H "SOAPAction:" -d @your_soap_request.xml -X POST https://ws.paymentech.net/PaymentechGateway
I use Pipes in Angular 2+ to filter arrays of objects. The following takes multiple filter arguments but you can send just one if that suits your needs. Here is a StackBlitz Example. It will find the keys you want to filter by and then filters by the value you supply. It's actually quite simple, if it sounds complicated it's not, check out the StackBlitz Example.
Here is the Pipe being called in an *ngFor directive,
<div *ngFor='let item of items | filtermulti: [{title:"mr"},{last:"jacobs"}]' >
Hello {{item.first}} !
</div>
Here is the Pipe,
import { Pipe, PipeTransform } from '@angular/core';
@Pipe({
name: 'filtermulti'
})
export class FiltermultiPipe implements PipeTransform {
transform(myobjects: Array<object>, args?: Array<object>): any {
if (args && Array.isArray(myobjects)) {
// copy all objects of original array into new array of objects
var returnobjects = myobjects;
// args are the compare oprators provided in the *ngFor directive
args.forEach(function (filterobj) {
let filterkey = Object.keys(filterobj)[0];
let filtervalue = filterobj[filterkey];
myobjects.forEach(function (objectToFilter) {
if (objectToFilter[filterkey] != filtervalue && filtervalue != "") {
// object didn't match a filter value so remove it from array via filter
returnobjects = returnobjects.filter(obj => obj !== objectToFilter);
}
})
});
// return new array of objects to *ngFor directive
return returnobjects;
}
}
}
And here is the Component containing the object to filter,
import { Component } from '@angular/core';
import { FiltermultiPipe } from './pipes/filtermulti.pipe';
@Component({
selector: 'app-root',
templateUrl: './app.component.html',
styleUrls: ['./app.component.css']
})
export class AppComponent {
title = 'app';
items = [{ title: "mr", first: "john", last: "jones" }
,{ title: "mr", first: "adrian", last: "jacobs" }
,{ title: "mr", first: "lou", last: "jones" }
,{ title: "ms", first: "linda", last: "hamilton" }
];
}
GitHub Example: Fork a working copy of this example here
*Please note that in an answer provided by Gunter, Gunter states that arrays are no longer used as filter interfaces but I searched the link he provides and found nothing speaking to that claim. Also, the StackBlitz example provided shows this code working as intended in Angular 6.1.9. It will work in Angular 2+.
Happy Coding :-)
This look like a duplicate of JSTL conditional check.
The error is having the &&
outside the expression. Instead use
<c:if test="${ISAJAX == 0 && ISDATE == 0}">
You need to install it in a directory in your home folder, and somehow manipulate the PYTHONPATH so that directory is included.
The best and easiest is to use virtualenv. But that requires installation, causing a catch 22. :) But check if virtualenv is installed. If it is installed you can do this:
$ cd /tmp
$ virtualenv foo
$ cd foo
$ ./bin/python
Then you can just run the installation as usual, with /tmp/foo/python setup.py install. (Obviously you need to make the virtual environment in your a folder in your home directory, not in /tmp/foo. ;) )
If there is no virtualenv, you can install your own local Python. But that may not be allowed either. Then you can install the package in a local directory for packages:
$ wget http://pypi.python.org/packages/source/s/six/six-1.0b1.tar.gz#md5=cbfcc64af1f27162a6a6b5510e262c9d
$ tar xvf six-1.0b1.tar.gz
$ cd six-1.0b1/
$ pythonX.X setup.py install --install-dir=/tmp/frotz
Now you need to add /tmp/frotz/pythonX.X/site-packages
to your PYTHONPATH, and you should be up and running!
Use the compareTo
method of BigDecimal :
public int compareTo(BigDecimal val) Compares this BigDecimal with the specified BigDecimal.
Returns: -1, 0, or 1 as this BigDecimal is numerically less than, equal to, or greater than val.
A new feature added in 12cR2 is the ON OVERFLOW
clause of LISTAGG
.
The query including this clause would look like:
SELECT pid, LISTAGG(Desc, ' ' ON OVERFLOW TRUNCATE ) WITHIN GROUP (ORDER BY seq) AS desc
FROM B GROUP BY pid;
The above will restrict the output to 4000 characters but will not throw the ORA-01489
error.
These are some of the additional options of ON OVERFLOW
clause:
ON OVERFLOW TRUNCATE 'Contd..'
: This will display 'Contd..'
at
the end of string (Default is ...
)ON OVERFLOW TRUNCATE ''
: This will display the 4000 characters
without any terminating string.ON OVERFLOW TRUNCATE WITH COUNT
: This will display the total
number of characters at the end after the terminating characters.
Eg:- '...(5512)
'ON OVERFLOW ERROR
: If you expect the LISTAGG
to fail with the
ORA-01489
error ( Which is default anyway ).i've used the $templateCache to accomplish something similar. i put several ng-templates in a single html file, which i reference using the directive's templateUrl. that ensures the html is available to the template cache. then i can simply select by id to get the ng-template i want.
template.html:
<script type="text/ng-template" id=“foo”>
foo
</script>
<script type="text/ng-template" id=“bar”>
bar
</script>
directive:
myapp.directive(‘foobardirective’, ['$compile', '$templateCache', function ($compile, $templateCache) {
var getTemplate = function(data) {
// use data to determine which template to use
var templateid = 'foo';
var template = $templateCache.get(templateid);
return template;
}
return {
templateUrl: 'views/partials/template.html',
scope: {data: '='},
restrict: 'E',
link: function(scope, element) {
var template = getTemplate(scope.data);
element.html(template);
$compile(element.contents())(scope);
}
};
}]);
timestamp
(or date
or time
columns) do NOT have "a format".
Any formatting you see is applied by the SQL client you are using.
To insert the current time use current_timestamp
as documented in the manual:
INSERT into "Group" (name,createddate)
VALUES ('Test', current_timestamp);
To display that value in a different format change the configuration of your SQL client or format the value when SELECTing the data:
select name, to_char(createddate, ''yyyymmdd hh:mi:ss tt') as created_date
from "Group"
For psql
(the default command line client) you can configure the display format through the configuration parameter DateStyle
: https://www.postgresql.org/docs/current/static/runtime-config-client.html#GUC-DATESTYLE
The settings for Decimal
are its precision and scale or in normal language, how many digits can a number have and how many digits do you want to have to the right of the decimal point.
So if you put PI
into a Decimal(18,0)
it will be recorded as 3
?
If you put PI
into a Decimal(18,2)
it will be recorded as 3.14
?
If you put PI
into Decimal(18,10)
be recorded as 3.1415926535
.
For ImageButton you can use:
favoriteImageButton.setColorFilter(Color.argb(255, 255, 255, 255)); // White Tint
Remove the "height" property.
<img src="big_image.jpg" width="900" alt=""/>
By specifying both you are changing the aspect ratio of the image. Just setting one will resize but preserve the aspect ratio.
Optionally, to restrict oversizings:
<img src="big_image.jpg" width="900" alt="" style="max-width:500px; height:auto; max-height:600px;"/>
$.fn.attr(attributeName) returns the attribute value as string, or undefined
when the attribute is not present.
Since ""
, and undefined
are both falsy (evaluates to false when coerced to boolean) values in JavaScript, in this case I would write the check as below:
if (wlocation) { ... }
The parentheses are poorly placed.
You need to use:
doThrow(new Exception()).when(mockedObject).methodReturningVoid(...);
^
and NOT use:
doThrow(new Exception()).when(mockedObject.methodReturningVoid(...));
^
This is explained in the documentation
If you're just doing some quick and dirty temporary work, you can also skip typing out an explicit CREATE TABLE statement and just make the temp table with a SELECT...INTO and include an Identity field in the select list.
select IDENTITY(int, 1, 1) as ROW_ID,
Name
into #tmp
from (select 'Bob' as Name union all
select 'Susan' as Name union all
select 'Alice' as Name) some_data
select *
from #tmp
set -x
enables a mode of the shell where all executed commands are printed to the terminal. In your case it's clearly used for debugging, which is a typical use case for set -x
: printing every command as it is executed may help you to visualize the control flow of the script if it is not functioning as expected.
set +x
disables it.
The default execution policy, "Restricted", prevents all scripts from running, including scripts that you write on the local computer.
The execution policy is saved in the registry, so you need to change it only once on each computer.
To change the execution policy, use the following procedure:
Start Windows PowerShell with the "Run as administrator" option.
At the command prompt, type:
Set-ExecutionPolicy AllSigned
-or-
Set-ExecutionPolicy RemoteSigned
The change is effective immediately.
To run a script, type the full name and the full path to the script file.
For example, to run the Get-ServiceLog.ps1
script in the C:\Scripts
directory, type:
C:\Scripts\Get-ServiceLog.ps1
And to the Python file, you have two points. Try to add your Python folder to your PATH and the extension .py
.
To PATHEXT from go properties of computer. Then click on advanced system protection. Then environment variable. Here you will find the two points.
Even though the question is too old, but I would like to share the solution that worked for me because I already checked everything when it comes to this error. It was a pain, I spent two days trying and at the end the solution was:
update the M2e plugin in eclipse
clean and build again
So I assume your permissions table has a foreign key reference to admin_accounts table. If so because of referential integrity you will only be able to add permissions for account ids exsiting in the admin accounts table. Which also means that you wont be able to enter a user_account_id [assuming there are no duplicates!]
You're getting the error because result
defined as Sequential()
is just a container for the model and you have not defined an input for it.
Given what you're trying to build set result
to take the third input x3
.
first = Sequential()
first.add(Dense(1, input_shape=(2,), activation='sigmoid'))
second = Sequential()
second.add(Dense(1, input_shape=(1,), activation='sigmoid'))
third = Sequential()
# of course you must provide the input to result which will be your x3
third.add(Dense(1, input_shape=(1,), activation='sigmoid'))
# lets say you add a few more layers to first and second.
# concatenate them
merged = Concatenate([first, second])
# then concatenate the two outputs
result = Concatenate([merged, third])
ada_grad = Adagrad(lr=0.1, epsilon=1e-08, decay=0.0)
result.compile(optimizer=ada_grad, loss='binary_crossentropy',
metrics=['accuracy'])
However, my preferred way of building a model that has this type of input structure would be to use the functional api.
Here is an implementation of your requirements to get you started:
from keras.models import Model
from keras.layers import Concatenate, Dense, LSTM, Input, concatenate
from keras.optimizers import Adagrad
first_input = Input(shape=(2, ))
first_dense = Dense(1, )(first_input)
second_input = Input(shape=(2, ))
second_dense = Dense(1, )(second_input)
merge_one = concatenate([first_dense, second_dense])
third_input = Input(shape=(1, ))
merge_two = concatenate([merge_one, third_input])
model = Model(inputs=[first_input, second_input, third_input], outputs=merge_two)
ada_grad = Adagrad(lr=0.1, epsilon=1e-08, decay=0.0)
model.compile(optimizer=ada_grad, loss='binary_crossentropy',
metrics=['accuracy'])
To answer the question in the comments:
Concatenation works like this:
a b c
a b c g h i a b c g h i
d e f j k l d e f j k l
i.e rows are just joined.
x1
is input to first, x2
is input into second and x3
input into third.foo.GetColumnValues(dm.mainColumn, typeof(int));
foo.GetColumnValues(dm.mainColumn, typeof(string));
Or using generics:
foo.GetColumnValues<int>(dm.mainColumn);
foo.GetColumnValues<string>(dm.mainColumn);
To complement the previous stated solution, use:
str = str.replace("%", "%%");
If you look at the function (by typing it's name at the console) you will see that it is just a simple functionalized version of the [<-
function which is described at ?"["
. [
is a rather basic function to R so you would be well-advised to look at that page for further details. Especially important is learning that the index argument (the second argument in replace
can be logical, numeric or character classed values. Recycling will occur when there are differing lengths of the second and third arguments:
You should "read" the function call as" "within the first argument, use the second argument as an index for placing the values of the third argument into the first":
> replace( 1:20, 10:15, 1:2)
[1] 1 2 3 4 5 6 7 8 9 1 2 1 2 1 2 16 17 18 19 20
Character indexing for a named vector:
> replace(c(a=1, b=2, c=3, d=4), "b", 10)
a b c d
1 10 3 4
Logical indexing:
> replace(x <- c(a=1, b=2, c=3, d=4), x>2, 10)
a b c d
1 2 10 10
I Found The Solution Below are the Stpes:-
For Multiple Dll :-
C:\Program Files (x86)\Microsoft\ILMerge>ILMerge.exe /target:winexe /targetplatform:"v4,C:\Windows\Microsoft.NET\Framework\v4.0.30319" /out:NewExeName.exe SourceExeName.exe DllName1.dll DllName2.dll DllName3.dll
Just incase this helps anyone else also, I was signed into the mac app, command line working fine, but because I then turned on 2FA, my commands were returning the error. I had to sign out of the app, then I could use my Personal access token in my commands as per ele's answer here.
Hopefully that helps someone!
Just ran into this... I have a common library shared among multiple transpiled products. I was using symlinks with brunch to handle sharing things between the projects. When moving to webpack, this stopped working.
What did get things working was using webpack configuration to turn off symlink resolving.
i.e. adding this in webpack.config.js
:
module.exports = {
//...
resolve: {
symlinks: false
}
};
as documented here:
https://webpack.js.org/configuration/resolve/#resolvesymlinks
When using the saveas function the resolution isn't as good as when manually saving the figure with File-->Save As..., It's more recommended to use hgexport instead, as follows:
hgexport(gcf, 'figure1.jpg', hgexport('factorystyle'), 'Format', 'jpeg');
This will do exactly as manually saving the figure.
source: http://www.mathworks.com/support/solutions/en/data/1-1PT49C/index.html?product=SL&solution=1-1PT49C
I always thought it was lazy not to use them. I was taught it should always be done. But then, I didnt listen to Joel's discussion. He may have had a good reason, I don't know.
Try this:
if (MessageBox.Show("Are you sure", "Title_here", MessageBoxButton.YesNo) == MessageBoxResult.Yes)
{
Do something here for 'Yes'...
}
There are tcpdump filters for HTTP GET & HTTP POST (or for both plus message body):
Run man tcpdump | less -Ip examples
to see some examples
Here’s a tcpdump filter for HTTP GET (GET
= 0x47
, 0x45
, 0x54
, 0x20
):
sudo tcpdump -s 0 -A 'tcp[((tcp[12:1] & 0xf0) >> 2):4] = 0x47455420'
Here’s a tcpdump filter for HTTP POST (POST
= 0x50
, 0x4f
, 0x53
, 0x54
):
sudo tcpdump -s 0 -A 'tcp dst port 80 and (tcp[((tcp[12:1] & 0xf0) >> 2):4] = 0x504f5354)'
Monitor HTTP traffic including request and response headers and message body (source):
tcpdump -A -s 0 'tcp port 80 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)'
tcpdump -X -s 0 'tcp port 80 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)'
For more information on the bit-twiddling in the TCP header see: String-Matching Capture Filter Generator (link to Sake Blok's explanation).
To validate for only letters and spaces, try this
String name1_exp = "^[a-zA-Z]+[\-'\s]?[a-zA-Z ]+$";
Another possible solution: create an object containing the group names and indexes.
var regex = new RegExp("(.*) (.*)");
var regexGroups = { FirstName: 1, LastName: 2 };
Then, use the object keys to reference the groups:
var m = regex.exec("John Smith");
var f = m[regexGroups.FirstName];
This improves the readability/quality of the code using the results of the regex, but not the readability of the regex itself.
Export (or datapump if you have 10g/11g) is the way to do it. Why not ask how to fix your problems with that rather than trying to find another way to do it?
Use the Take(int n)
method:
var q = query.Take(10);
I could do this with a custom attribute as follows.
[AuthorizeUser(AccessLevel = "Create")]
public ActionResult CreateNewInvoice()
{
//...
return View();
}
Custom Attribute class as follows.
public class AuthorizeUserAttribute : AuthorizeAttribute
{
// Custom property
public string AccessLevel { get; set; }
protected override bool AuthorizeCore(HttpContextBase httpContext)
{
var isAuthorized = base.AuthorizeCore(httpContext);
if (!isAuthorized)
{
return false;
}
string privilegeLevels = string.Join("", GetUserRights(httpContext.User.Identity.Name.ToString())); // Call another method to get rights of the user from DB
return privilegeLevels.Contains(this.AccessLevel);
}
}
You can redirect an unauthorised user in your custom AuthorisationAttribute
by overriding the HandleUnauthorizedRequest
method:
protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)
{
filterContext.Result = new RedirectToRouteResult(
new RouteValueDictionary(
new
{
controller = "Error",
action = "Unauthorised"
})
);
}
The event is probably raised before the elements are fully loaded or the references are still unset, hence the exceptions. Try only setting properties if the reference is not null
and IsLoaded
is true
.
There are three main reasons for using the assert() function over the normal if else and printf
assert() function is mainly used in the debugging phase, it is tedious to write if else with a printf statement everytime you want to test a condition which might not even make its way in the final code.
In large software deployments , assert comes very handy where you can make the compiler ignore the assert statements using the NDEBUG macro defined before linking the header file for assert() function.
assert() comes handy when you are designing a function or some code and want to get an idea as to what limits the code will and not work and finally include an if else for evaluating it basically playing with assumptions.
As other people have answered, .cshtml
(or .vbhtml
if that's your flavor) provides a handler-mapping to load the MVC engine. The .aspx
extension simply loads the aspnet_isapi.dll that performs the compile and serves up web forms. The difference in the handler mapping is simply a method of allowing the two to co-exist on the same server allowing both MVC applications and WebForms applications to live under a common root.
This allows http://www.mydomain.com/MyMVCApplication to be valid and served with MVC rules along with http://www.mydomain.com/MyWebFormsApplication to be valid as a standard web form.
Edit:
As for the difference in the technologies, the MVC (Razor) templating framework is intended to return .Net pages to a more RESTful "web-based" platform of templated views separating the code logic between the model (business/data objects), the view (what the user sees) and the controllers (the connection between the two). The WebForms model (aspx) was an attempt by Microsoft to use complex javascript embedding to simulate a more stateful application similar to a WinForms application complete with events and a page lifecycle that would be capable of retaining its own state from page to page.
The choice to use one or the other is always going to be a contentious one because there are arguments for and against both systems. I for one like the simplicity in the MVC architecture (though routing is anything but simple) and the ease of the Razor syntax. I feel the WebForms architecture is just too heavy to be an effective web platform. That being said, there are a lot of instances where the WebForms framework provides a very succinct and usable model with a rich event structure that is well defined. It all boils down to the needs of the application and the preferences of those building it.
Try opening services.msc
from the start menu search box and try manually starting the MySQL service or directly write services.msc
in Run
box
I'm using the following piece of code for my friendly urls:
from unicodedata import normalize
from re import sub
def slugify(title):
name = normalize('NFKD', title).encode('ascii', 'ignore').replace(' ', '-').lower()
#remove `other` characters
name = sub('[^a-zA-Z0-9_-]', '', name)
#nomalize dashes
name = sub('-+', '-', name)
return name
It works fine with unicode characters as well.
The Set statement is only used for object variables (like Range
, Cell
or Worksheet
in Excel), while the simple equal sign '=' is used for elementary datatypes like Integer
. You can find a good explanation for when to use set here.
The other problem is, that your variable g1val
isn't actually declared as Integer
, but has the type Variant
. This is because the Dim statement doesn't work the way you would expect it, here (see example below). The variable has to be followed by its type right away, otherwise its type will default to Variant
. You can only shorten your Dim statement this way:
Dim intColumn As Integer, intRow As Integer 'This creates two integers
For this reason, you will see the "Empty" instead of the expected "0" in the Watches window.
Try this example to understand the difference:
Sub Dimming()
Dim thisBecomesVariant, thisIsAnInteger As Integer
Dim integerOne As Integer, integerTwo As Integer
MsgBox TypeName(thisBecomesVariant) 'Will display "Empty"
MsgBox TypeName(thisIsAnInteger ) 'Will display "Integer"
MsgBox TypeName(integerOne ) 'Will display "Integer"
MsgBox TypeName(integerTwo ) 'Will display "Integer"
'By assigning an Integer value to a Variant it becomes Integer, too
thisBecomesVariant = 0
MsgBox TypeName(thisBecomesVariant) 'Will display "Integer"
End Sub
Two further notices on your code:
First remark: Instead of writing
'If g1val is bigger than the value in the current cell
If g1val > Cells(33, i).Value Then
g1val = g1val 'Don't change g1val
Else
g1val = Cells(33, i).Value 'Otherwise set g1val to the cell's value
End If
you could simply write
'If g1val is smaller or equal than the value in the current cell
If g1val <= Cells(33, i).Value Then
g1val = Cells(33, i).Value 'Set g1val to the cell's value
End If
Since you don't want to change g1val
in the other case.
Second remark: I encourage you to use Option Explicit when programming, to prevent typos in your program. You will then have to declare all variables and the compiler will give you a warning if a variable is unknown.
Rails / ruby frameworks are able to do some templating ... it's frequently used to load env variables ...
# fooz.yml
foo:
bar: <%= $ENV[:some_var] %>
No idea if this works for javascript frameworks as I think that YML format is superset of json and it depends on what reads the yml file for you.
If you can use the template like that or the << >>
or the {{ }}
styles depending on your reader, after that you just ...
In another yml file ...
# boo.yml
development:
fooz: foo
Which allows you to basically insert a variable as your reference that original file each time which is dynamically set. When reading I was also seeing you can create or open YML files as objects on the fly for several languages which allows you to create a file & chain write a series of YML files or just have them all statically pointing to the dynamically created one.
I tried with and it works
use mysql; # use mysql table
update user set authentication_string="" where User='root';
flush privileges;
quit;
Here is another example using the lapply
and table
functions in base R.
freqList = lapply(select_if(tips, is.factor),
function(x) {
df = data.frame(table(x))
df = data.frame(fct = df[, 1],
n = sapply(df[, 2], function(y) {
round(y / nrow(dat), 2)
}
)
)
return(df)
}
)
Use print(freqList)
to see the proportion tables (percent of frequencies) for each column/feature/variable (depending on your tradecraft) that is labeled as a factor.
To print the name of the fields in a struct:
fmt.Printf("%+v\n", yourProject)
From the fmt
package:
when printing structs, the plus flag (
%+v
) adds field names
That supposes you have an instance of Project (in 'yourProject
')
The article JSON and Go will give more details on how to retrieve the values from a JSON struct.
This Go by example page provides another technique:
type Response2 struct {
Page int `json:"page"`
Fruits []string `json:"fruits"`
}
res2D := &Response2{
Page: 1,
Fruits: []string{"apple", "peach", "pear"}}
res2B, _ := json.Marshal(res2D)
fmt.Println(string(res2B))
That would print:
{"page":1,"fruits":["apple","peach","pear"]}
If you don't have any instance, then you need to use reflection to display the name of the field of a given struct, as in this example.
type T struct {
A int
B string
}
t := T{23, "skidoo"}
s := reflect.ValueOf(&t).Elem()
typeOfT := s.Type()
for i := 0; i < s.NumField(); i++ {
f := s.Field(i)
fmt.Printf("%d: %s %s = %v\n", i,
typeOfT.Field(i).Name, f.Type(), f.Interface())
}
i got the same problem but i found the solution.
public class EditTextSmartPhoneActivity extends Activity implements DialogInterface.OnClickListener
{
public final static int CREATE_DIALOG = -1;
public final static int THEME_HOLO_LIGHT = 0;
public final static int THEME_BLACK = 1;
int position;
/** Called when the activity is first created. */
@Override
public void onCreate(Bundle savedInstanceState)
{
position = getIntent().getIntExtra("position", -1);
switch(position)
{
case CREATE_DIALOG:
createDialog();
break;
case THEME_HOLO_LIGHT:
setTheme(android.R.style.Theme_Holo_Light);
break;
case THEME_BLACK:
setTheme(android.R.style.Theme_Black);
break;
default:
}
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
}
private void createDialog()
{
/** Options for user to select*/
String choose[] = {"Theme_Holo_Light","Theme_Black"};
AlertDialog.Builder b = new AlertDialog.Builder(this);
/** Setting a title for the window */
b.setTitle("Choose your Application Theme");
/** Setting items to the alert dialog */
b.setSingleChoiceItems(choose, 0, null);
/** Setting a positive button and its listener */
b.setPositiveButton("OK",this);
/** Setting a positive button and its listener */
b.setNegativeButton("Cancel", null);
/** Creating the alert dialog window using the builder class */
AlertDialog d = b.create();
/** show dialog*/
d.show();
}
@Override
public void onClick(DialogInterface dialog, int which) {
// TODO Auto-generated method stub
AlertDialog alert = (AlertDialog)dialog;
int position = alert.getListView().getCheckedItemPosition();
finish();
Intent intent = new Intent(this, EditTextSmartPhoneActivity.class);
intent.putExtra("position", position);
intent.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP);
intent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
startActivity(intent);
}
}
If you save the excel file as a CSV file then you can import it into a mysql database using tools such as PHPMyAdmin
Im not sure if this would help in your situation, but a csv file either manually or programatically would be a lot easier to parse into a database than an excel file I would have thought.
EDIT: I would however suggest looking at the other answers rather than mine since @diEcho answer seems more appropriate.
var diff = moment(end).unix() - moment(start).unix();
moment.utc(moment.duration(diff).asMilliseconds()).format("HH:mm:ss.SSS");
Using alias for referencing the tables to get the columns from different tables after joining them.
Select tb1.*, tb2.col1, tb2.col2 from table1 tb1 JOIN table2 tb2 on tb1.Id = tb2.Id
To anyone else looking for this, I wasn't able to use certutil -importpfx
into a specific store, and I didn't want to download the importpfx tool supplied by jaspernygaard's answer in order to avoid the requirement of copying the file to a large number of servers. I ended up finding my answer in a powershell script shown here.
The code uses System.Security.Cryptography.X509Certificates
to import the certificate and then moves it into the desired store:
function Import-PfxCertificate {
param([String]$certPath,[String]$certRootStore = “localmachine”,[String]$certStore = “My”,$pfxPass = $null)
$pfx = new-object System.Security.Cryptography.X509Certificates.X509Certificate2
if ($pfxPass -eq $null)
{
$pfxPass = read-host "Password" -assecurestring
}
$pfx.import($certPath,$pfxPass,"Exportable,PersistKeySet")
$store = new-object System.Security.Cryptography.X509Certificates.X509Store($certStore,$certRootStore)
$store.open("MaxAllowed")
$store.add($pfx)
$store.close()
}
you can use attribute data-html="true"
:
<a href="#" id="example" rel="popover"
data-content="<div>This <b>is</b> your div content</div>"
data-html="true" data-original-title="A Title">popover</a>
Besides using one of the default formats you can specify any size you want in the unit you specify.
For example:
// Document of 210mm wide and 297mm high
new jsPDF('p', 'mm', [297, 210]);
// Document of 297mm wide and 210mm high
new jsPDF('l', 'mm', [297, 210]);
// Document of 5 inch width and 3 inch high
new jsPDF('l', 'in', [3, 5]);
The 3rd parameter of the constructor can take an array of the dimensions. However they do not correspond to width and height, instead they are long side and short side (or flipped around).
Your 1st parameter (landscape
or portrait
) determines what becomes the width and the height.
In the sourcecode on GitHub you can see the supported units (relative proportions to pt
), and you can also see the default page formats (with their sizes in pt
).
A solution with works with Python 2.X and Python 3.X:
try:
# For Python 3.0 and later
from urllib.request import urlopen
except ImportError:
# Fall back to Python 2's urllib2
from urllib2 import urlopen
url = 'http://hiscore.runescape.com/index_lite.ws?player=zezima'
response = urlopen(url)
data = str(response.read())
ryeguy, I am currently developing a similar application and my threads number is set to 15. Unfortunately if I increase it at 20, it crashes. So, yes, I think the best way to handle this is to measure whether or not your current configuration allows more or less than a number X of threads.
Here's a jQuery solution.
<script type="text/javascript" src="/path/to/your/copy/of/jquery-1.3.2.min.js"></script>
<script type="text/javascript">
$(document).ready(function() {
$("#sub1").mouseover(function() {
$("#welcome").toggle();
});
});
</script>
Using this markup:
<div id="sub1">some text</div>
<div id="welcome" style="display:none;">Welcome message</div>
You didn't really specify if (or when) you wanted to hide the welcome message, but this would toggle hiding or showing each time you moused over the text.
Another easy way of solving this error is right clicking in the console and click on Terminate/Disconnect All. Afterwards run the application it should work fine.
I would break up
public static void main(String args[])
in parts.
"public" means that main() can be called from anywhere.
"static" means that main() doesn't belong to a specific object
"void" means that main() returns no value
"main" is the name of a function. main() is special because it is the start of the program.
"String[]" means an array of String.
"args" is the name of the String[] (within the body of main()). "args" is not special; you could name it anything else and the program would work the same.
String[] args
is a collection of Strings, separated by a space, which can be typed into the program on the terminal. More times than not, the beginner isn't going to use this variable, but it's always there just in case.Go to this link
Download version tar.gz for windows and just extract files to the folder by your needs. On the left pane, you can select which version of openjdk to download
Tutorial: unzip as expected. You need to set system variable PATH to include your directory with openjdk so you can type java -version in console.
Returning &iterator will return the address of the iterator. If you want to return a way of referring to the element return the iterator itself.
Beware that you do not need the vector to be a global in order to return the iterator/pointer, but that operations in the vector can invalidate the iterator. Adding elements to the vector, for example, can move the vector elements to a different position if the new size() is greater than the reserved memory. Deletion of an element before the given item from the vector will make the iterator refer to a different element.
In both cases, depending on the STL implementation it can be hard to debug with just random errors happening each so often.
EDIT after comment: 'yes, I didn't want to return the iterator a) because its const, and b) surely it is only a local, temporary iterator? – Krakkos'
Iterators are not more or less local or temporary than any other variable and they are copyable. You can return it and the compiler will make the copy for you as it will with the pointer.
Now with the const-ness. If the caller wants to perform modifications through the returned element (whether pointer or iterator) then you should use a non-const iterator. (Just remove the 'const_' from the definition of the iterator).