I ran into the same situation where commands such as git diff origin
or git diff origin master
produced the error reported in the question, namely Fatal: ambiguous argument...
To resolve the situation, I ran the command
git symbolic-ref refs/remotes/origin/HEAD refs/remotes/origin/master
to set refs/remotes/origin/HEAD to point to the origin/master branch.
Before running this command, the output of git branch -a
was:
* master
remotes/origin/master
After running the command, the error no longer happened and the output of git branch -a
was:
* master
remotes/origin/HEAD -> origin/master
remotes/origin/master
(Other answers have already identified that the source of the error is HEAD not being set for origin. But I thought it helpful to provide a command which may be used to fix the error in question, although it may be obvious to some users.)
Additional information:
For anybody inclined to experiment and go back and forth between setting and unsetting refs/remotes/origin/HEAD, here are some examples.
To unset:
git remote set-head origin --delete
To set:
(additional ways, besides the way shown at the start of this answer)
git remote set-head origin master
to set origin/head explicitly
OR
git remote set-head origin --auto
to query the remote and automatically set origin/HEAD to the remote's current branch.
References:
git remote --help
see set-head descriptiongit symbolic-ref --help
That's where constructors come into play. If you have a default constructor (eg. with no parameters) that always creates a new Map, then you're sure that every instance of this class will always have an already instantiated Map.
You can use boolval($strValue)
Examples:
<?php
echo '0: '.(boolval(0) ? 'true' : 'false')."\n";
echo '42: '.(boolval(42) ? 'true' : 'false')."\n";
echo '0.0: '.(boolval(0.0) ? 'true' : 'false')."\n";
echo '4.2: '.(boolval(4.2) ? 'true' : 'false')."\n";
echo '"": '.(boolval("") ? 'true' : 'false')."\n";
echo '"string": '.(boolval("string") ? 'true' : 'false')."\n";
echo '"0": '.(boolval("0") ? 'true' : 'false')."\n";
echo '"1": '.(boolval("1") ? 'true' : 'false')."\n";
echo '[1, 2]: '.(boolval([1, 2]) ? 'true' : 'false')."\n";
echo '[]: '.(boolval([]) ? 'true' : 'false')."\n";
echo 'stdClass: '.(boolval(new stdClass) ? 'true' : 'false')."\n";
?>
Documentation http://php.net/manual/es/function.boolval.php
1)Yes it is, when there is style then it is styling your code(css).2) is belong to html it is like a container that keep your css.
To create database dump
cd /var/lib/pgsql/
pg_dump database_name> database_name.out
To resote database dump
psql -d template1
CREATE DATABASE database_name WITH ENCODING 'UTF8' LC_CTYPE 'en_US.UTF-8' LC_COLLATE 'en_US.UTF-8' TEMPLATE template0;
CREATE USER role_name WITH PASSWORD 'password';
ALTER DATABASE database_name OWNER TO role_name;
ALTER USER role_name CREATEDB;
GRANT ALL PRIVILEGES ON DATABASE database_name to role_name;
CTR+D(logout from pgsql console)
cd /var/lib/pgsql/
psql -d database_name -f database_name.out
Recall that in Dijkstra's algorithm, once a vertex is marked as "closed" (and out of the open set) -it assumes that any node originating from it will lead to greater distance so, the algorithm found the shortest path to it, and will never have to develop this node again, but this doesn't hold true in case of negative weights.
This thread is old but was the first one to come up so I thought id share my solution too. Apart from having named routes in your routes.php file. This error can also occur when you have duplicate URLs in your routes file, but with different names, the error can be misleading in this scenario. Example
Route::any('official/form/reject-form', 'FormStatus@rejectForm')->name('reject-form');
Route::any('official/form/accept-form', 'FormStatus@acceptForm')->name('accept-form');
Changing one of the names solves the problem. Copy pasting and fatigue will get you to this problem :).
Static methods in java belong to the class (not an instance of it). They use no instance variables and will usually take input from the parameters, perform actions on it, then return some result. Instances methods are associated with objects and, as the name implies, can use instance variables.
meh, just use https://github.com/andresaraujo/timeago.dart library; it does all the heavy-lifting for you.
EDIT:
From your question, it seems you wanted relative time conversions, and the timeago library enables you to do this in 1 line of code. Converting Dates isn't something I'd choose to implement myself, as there are a lot of edge cases & it gets fugly quickly, especially if you need to support different locales in the future. More code you write = more you have to test.
import 'package:timeago/timeago.dart' as timeago;
final fifteenAgo = DateTime.now().subtract(new Duration(minutes: 15));
print(timeago.format(fifteenAgo)); // 15 minutes ago
print(timeago.format(fifteenAgo, locale: 'en_short')); // 15m
print(timeago.format(fifteenAgo, locale: 'es'));
// Add a new locale messages
timeago.setLocaleMessages('fr', timeago.FrMessages());
// Override a locale message
timeago.setLocaleMessages('en', CustomMessages());
print(timeago.format(fifteenAgo)); // 15 min ago
print(timeago.format(fifteenAgo, locale: 'fr')); // environ 15 minutes
to convert epochMS to DateTime, just use...
final DateTime timeStamp = DateTime.fromMillisecondsSinceEpoch(1546553448639);
I came here with similar error:
System.InvalidOperationException: 'The entity type 'MyType' requires a primary key to be defined.'
After reading answer by hvd, realized I had simply forgotten to make my key property 'public'. This..
namespace MyApp.Models.Schedule
{
public class MyType
{
[Key]
int Id { get; set; }
// ...
Should be this..
namespace MyApp.Models.Schedule
{
public class MyType
{
[Key]
public int Id { get; set; } // must be public!
// ...
Whilst you certainly can use MySQL's IF()
control flow function as demonstrated by dbemerlin's answer, I suspect it might be a little clearer to the reader (i.e. yourself, and any future developers who might pick up your code in the future) to use a CASE
expression instead:
UPDATE Table
SET A = CASE
WHEN A > 0 AND A < 1 THEN 1
WHEN A > 1 AND A < 2 THEN 2
ELSE A
END
WHERE A IS NOT NULL
Of course, in this specific example it's a little wasteful to set A
to itself in the ELSE
clause—better entirely to filter such conditions from the UPDATE
, via the WHERE
clause:
UPDATE Table
SET A = CASE
WHEN A > 0 AND A < 1 THEN 1
WHEN A > 1 AND A < 2 THEN 2
END
WHERE (A > 0 AND A < 1) OR (A > 1 AND A < 2)
(The inequalities entail A IS NOT NULL
).
Or, if you want the intervals to be closed rather than open (note that this would set values of 0
to 1
—if that is undesirable, one could explicitly filter such cases in the WHERE
clause, or else add a higher precedence WHEN
condition):
UPDATE Table
SET A = CASE
WHEN A BETWEEN 0 AND 1 THEN 1
WHEN A BETWEEN 1 AND 2 THEN 2
END
WHERE A BETWEEN 0 AND 2
Though, as dbmerlin also pointed out, for this specific situation you could consider using CEIL()
instead:
UPDATE Table SET A = CEIL(A) WHERE A BETWEEN 0 AND 2
Use:
int myInt = 2934;
string myHex = myInt.ToString("X"); // Gives you hexadecimal
int myNewInt = Convert.ToInt32(myHex, 16); // Back to int again.
See How to: Convert Between Hexadecimal Strings and Numeric Types (C# Programming Guide) for more information and examples.
That depends on what the target server accepts. There is no definitive standard for this. See also a.o. Wikipedia: Query string:
While there is no definitive standard, most web frameworks allow multiple values to be associated with a single field (e.g.
field1=value1&field1=value2&field2=value3
).[4][5]
Generally, when the target server uses a strong typed programming language like Java (Servlet), then you can just send them as multiple parameters with the same name. The API usually offers a dedicated method to obtain multiple parameter values as an array.
foo=value1&foo=value2&foo=value3
String[] foo = request.getParameterValues("foo"); // [value1, value2, value3]
The request.getParameter("foo")
will also work on it, but it'll return only the first value.
String foo = request.getParameter("foo"); // value1
And, when the target server uses a weak typed language like PHP or RoR, then you need to suffix the parameter name with braces []
in order to trigger the language to return an array of values instead of a single value.
foo[]=value1&foo[]=value2&foo[]=value3
$foo = $_GET["foo"]; // [value1, value2, value3]
echo is_array($foo); // true
In case you still use foo=value1&foo=value2&foo=value3
, then it'll return only the first value.
$foo = $_GET["foo"]; // value1
echo is_array($foo); // false
Do note that when you send foo[]=value1&foo[]=value2&foo[]=value3
to a Java Servlet, then you can still obtain them, but you'd need to use the exact parameter name including the braces.
String[] foo = request.getParameterValues("foo[]"); // [value1, value2, value3]
I would add, and also to answer the question find mean bin values using histogram2d python that the scipy also have a function specially designed to compute a bidimensional binned statistic for one or more sets of data
import numpy as np
from scipy.stats import binned_statistic_2d
x = np.random.rand(100)
y = np.random.rand(100)
values = np.random.rand(100)
bin_means = binned_statistic_2d(x, y, values, bins=10).statistic
the function scipy.stats.binned_statistic_dd is a generalization of this funcion for higher dimensions datasets
find . -size +10000k -exec ls -sd {} +
If your version of find
won't accept the +
notation (which acts rather like xargs
does), then you might use (GNU find
and xargs
, so find
probably supports +
anyway):
find . -size +10000k -print0 | xargs -0 ls -sd
or you might replace the +
with \;
(and live with the relative inefficiency of this), or you might live with problems caused by spaces in names and use the portable:
find . -size +10000k -print | xargs ls -sd
The -d
on the ls
commands ensures that if a directory is ever found (unlikely, but...), then the directory information will be printed, not the files in the directory. And, if you're looking for files more than 1 MB (as a now-deleted comment suggested), you need to adjust the +10000k
to 1000k
or maybe +1024k
, or +2048
(for 512-byte blocks, the default unit for -size
). This will list the size and then the file name. You could avoid the need for -d
by adding -type f
to the find
command, of course.
http://dev.mysql.com/doc/refman/5.0/en/string-functions.html#function_concat-ws
SELECT CONCAT_WS(" ", `first_name`, `last_name`) AS `whole_name` FROM `users`
The Media Source Extensions has been proposed which would allow for Adaptive Bitrate Streaming implementations.
You could listen to the 'keydown'
event and then check for an enter key.
Your handler would be like:
function (e) {
if (13 == e.keyCode) {
... do whatever ...
}
}
In memory usage and speed.
When you call jsonstr = json.dumps(mydata)
it first creates a full copy of your data in memory and only then you file.write(jsonstr)
it to disk. So this is a faster method but can be a problem if you have a big piece of data to save.
When you call json.dump(mydata, file)
-- without 's', new memory is not used, as the data is dumped by chunks. But the whole process is about 2 times slower.
Source: I checked the source code of json.dump()
and json.dumps()
and also tested both the variants measuring the time with time.time()
and watching the memory usage in htop.
If you want to add the elements in a list (list2) to the end of other list (list), then you can use the list extend method
list = [1, 2, 3]
list2 = [4, 5, 6]
list.extend(list2)
print list
[1, 2, 3, 4, 5, 6]
Or if you want to concatenate two list then you can use + sign
list3 = list + list2
print list3
[1, 2, 3, 4, 5, 6]
INSTALLED_APPS = [
'rest_framework',
'django.contrib.admin',
'django.contrib.auth',
'django.contrib.contenttypes',
'django.contrib.sessions',
'django.contrib.messages',
'django.contrib.staticfiles',
#apps
'apps.endpoints',
]
maybe forgot the comma "," or while pasting packing name it might have extra whitespace "packagename "check for that
($)
allows functions to be chained together without adding parentheses to control evaluation order:
Prelude> head (tail "asdf")
's'
Prelude> head $ tail "asdf"
's'
The compose operator (.)
creates a new function without specifying the arguments:
Prelude> let second x = head $ tail x
Prelude> second "asdf"
's'
Prelude> let second = head . tail
Prelude> second "asdf"
's'
The example above is arguably illustrative, but doesn't really show the convenience of using composition. Here's another analogy:
Prelude> let third x = head $ tail $ tail x
Prelude> map third ["asdf", "qwer", "1234"]
"de3"
If we only use third once, we can avoid naming it by using a lambda:
Prelude> map (\x -> head $ tail $ tail x) ["asdf", "qwer", "1234"]
"de3"
Finally, composition lets us avoid the lambda:
Prelude> map (head . tail . tail) ["asdf", "qwer", "1234"]
"de3"
These functions, based on the above, seem to work well for getting characters from the keyboard (blocking and non-blocking):
import termios, fcntl, sys, os
def get_char_keyboard():
fd = sys.stdin.fileno()
oldterm = termios.tcgetattr(fd)
newattr = termios.tcgetattr(fd)
newattr[3] = newattr[3] & ~termios.ICANON & ~termios.ECHO
termios.tcsetattr(fd, termios.TCSANOW, newattr)
c = None
try:
c = sys.stdin.read(1)
except IOError: pass
termios.tcsetattr(fd, termios.TCSAFLUSH, oldterm)
return c
def get_char_keyboard_nonblock():
fd = sys.stdin.fileno()
oldterm = termios.tcgetattr(fd)
newattr = termios.tcgetattr(fd)
newattr[3] = newattr[3] & ~termios.ICANON & ~termios.ECHO
termios.tcsetattr(fd, termios.TCSANOW, newattr)
oldflags = fcntl.fcntl(fd, fcntl.F_GETFL)
fcntl.fcntl(fd, fcntl.F_SETFL, oldflags | os.O_NONBLOCK)
c = None
try:
c = sys.stdin.read(1)
except IOError: pass
termios.tcsetattr(fd, termios.TCSAFLUSH, oldterm)
fcntl.fcntl(fd, fcntl.F_SETFL, oldflags)
return c
<a href="@Url.Action("RunReport", "Performance", new { reportView = Model.ReportView.ToString() })" type="submit" id="runReport" target="_blank" class="button Secondary"> @Reports.RunReport </a>
In python 2.6:
>>> print 'h','m','h'
h m h
>>> from __future__ import print_function
>>> print('h',end='')
h>>> print('h',end='');print('m',end='');print('h',end='')
hmh>>>
>>> print('h','m','h',sep='');
hmh
>>>
So using print_function from __future__ you can set explicitly the sep and end parameteres of print function.
I've resolved this issue by inferring the produced return type into the first GET requestMethod. The important part here is the
produces="application/json;charset=UTF-8
So every one how use /account/**, Spring will return application/json;charset=UTF-8 content type.
@Controller
@Scope("session")
@RequestMapping(value={"/account"}, method = RequestMethod.GET,produces="application/json;charset=UTF-8")
public class AccountController {
protected final Log logger = LogFactory.getLog(getClass());
....//More parameters and method here...
@RequestMapping(value={"/getLast"}, method = RequestMethod.GET)
public @ResponseBody String getUltimo(HttpServletResponse response) throws JsonGenerationException, JsonMappingException, IOException{
ObjectWriter writer = new ObjectMapper().writer().withDefaultPrettyPrinter();
try {
Account account = accountDao.getLast();
return writer.writeValueAsString(account);
}
catch (Exception e) {
return errorHandler(e, response, writer);
}
}
So, you do not have to set up for each method in your Controller, you can do it for the entire class. If you need more control over a specific method, you just only have to infer the produces return content type.
It is also good to set the access security - just replace * with the domain you want to be able to reach it.
<?php
header('Access-Control-Allow-Origin: *');
header('Content-type: application/json');
$response = array();
$response[0] = array(
'id' => '1',
'value1'=> 'value1',
'value2'=> 'value2'
);
echo json_encode($response);
?>
Here is more samples on that: how to bypass Access-Control-Allow-Origin?
/// <summary>
/// Contains global variables for project.
/// </summary>
public static class GlobalVar
{
/// <summary>
/// Global variable that is constant.
/// </summary>
public const string GlobalString = "Important Text";
/// <summary>
/// Static value protected by access routine.
/// </summary>
static int _globalValue;
/// <summary>
/// Access routine for global variable.
/// </summary>
public static int GlobalValue
{
get
{
return _globalValue;
}
set
{
_globalValue = value;
}
}
/// <summary>
/// Global static field.
/// </summary>
public static bool GlobalBoolean;
}
[root@host]# mysqladmin -u root -p drop [DB]
Enter password:******
Just to add to Jon's coding if you needed to take it a step further, and do more than just one column you can add something like
Dim copyRange2 As Range
Dim copyRange3 As Range
Set copyRange2 =src.Range("B2:B" & lastRow)
Set copyRange3 =src.Range("C2:C" & lastRow)
copyRange2.SpecialCells(xlCellTypeVisible).Copy tgt.Range("B12")
copyRange3.SpecialCells(xlCellTypeVisible).Copy tgt.Range("C12")
put these near the other codings that are the same you can easily change the Ranges as you need.
I only add this because it was helpful for me. I'd assume Jon already knows this but for those that are less experienced sometimes it's helpful to see how to change/add/modify these codings. I figured since Ruya didn't know how to manipulate the original coding it could be helpful if one ever needed to copy over only 2 visibile columns, or only 3, etc. You can use this same coding, add in extra lines that are almost the same and then the coding is copying over whatever you need.
I don't have enough reputation to reply to Jon's comment directly so I have to post as a new comment, sorry.
Because (
is special in regex, you should escape it \(
when matching. However, depending on what language you are using, you can easily match (
with string methods like index()
or other methods that enable you to find at what position the (
is in. Sometimes, there's no need to use regex.
UPDATE ed
SET ed.kWh = ted.kWh
FROM energydata ed
INNER JOIN temp_energydata ted ON ted.webmeterID = ed.webmeterID
In case somebody is running into this while trying to debug a Unit Test or Run a unit test I had to kill the following two processes in order for it to release the file:
iOS 8 ~/Library/Developer/CoreSimulator/Devices/[Device ID]/data/Applications/[appGUID]/Documents/
I like Daniel Vérité's answer. But when you can't use a CREATE statement you can either use a bash solution or, if you're a windows user, a powershell one:
# You don't need this if you have pgpass.conf
$env:PGPASSWORD = "userpass"
# Get table list
$tables = & 'C:\Program Files\PostgreSQL\9.4\bin\psql.exe' -U user -w -d dbname -At -c "select table_name from information_schema.tables where table_type='BASE TABLE' AND table_schema='schema1'"
foreach ($table in $tables) {
& 'C:\path_to_postresql\bin\psql.exe' -U root -w -d dbname -At -c "select '$table', count(*) from $table"
}
Assuming the type is CV_8UC3 you would do this:
for(int i = 0; i < foo.rows; i++)
{
for(int j = 0; j < foo.cols; j++)
{
Vec3b bgrPixel = foo.at<Vec3b>(i, j);
// do something with BGR values...
}
}
Here is the documentation for Vec3b. Hope that helps! Also, don't forget OpenCV stores things internally as BGR not RGB.
EDIT :
For performance reasons, you may want to use direct access to the data buffer in order to process the pixel values:
Here is how you might go about this:
uint8_t* pixelPtr = (uint8_t*)foo.data;
int cn = foo.channels();
Scalar_<uint8_t> bgrPixel;
for(int i = 0; i < foo.rows; i++)
{
for(int j = 0; j < foo.cols; j++)
{
bgrPixel.val[0] = pixelPtr[i*foo.cols*cn + j*cn + 0]; // B
bgrPixel.val[1] = pixelPtr[i*foo.cols*cn + j*cn + 1]; // G
bgrPixel.val[2] = pixelPtr[i*foo.cols*cn + j*cn + 2]; // R
// do something with BGR values...
}
}
Or alternatively:
int cn = foo.channels();
Scalar_<uint8_t> bgrPixel;
for(int i = 0; i < foo.rows; i++)
{
uint8_t* rowPtr = foo.row(i);
for(int j = 0; j < foo.cols; j++)
{
bgrPixel.val[0] = rowPtr[j*cn + 0]; // B
bgrPixel.val[1] = rowPtr[j*cn + 1]; // G
bgrPixel.val[2] = rowPtr[j*cn + 2]; // R
// do something with BGR values...
}
}
In a similar use case I had to skip annoying lines before the line with my actual column names. This solution worked nicely. Read the file first, then pass the list to csv.DictReader
.
with open('all16.csv') as tmp:
# Skip first line (if any)
next(tmp, None)
# {line_num: row}
data = dict(enumerate(csv.DictReader(tmp)))
Wrap the <form>
element inside a div
container and apply css to the div
instead which makes things easier.
#aDiv{width: 300px; height: 300px; margin: 0 auto;}
_x000D_
<html>_x000D_
_x000D_
<head></head>_x000D_
_x000D_
<body>_x000D_
<div>_x000D_
<form>_x000D_
<div id="aDiv">_x000D_
<table>_x000D_
<tr>_x000D_
<td>Name :</td>_x000D_
<td>_x000D_
<input type="text" name="name">_x000D_
</td>_x000D_
<br>_x000D_
</tr>_x000D_
<tr>_x000D_
<td>Email :</td>_x000D_
<td>_x000D_
<input type="text" name="email">_x000D_
</td>_x000D_
<br>_x000D_
</tr>_x000D_
<tr>_x000D_
<td>Password :</td>_x000D_
<td>_x000D_
<input type="password" name="pwd">_x000D_
</td>_x000D_
<br>_x000D_
</tr>_x000D_
<tr>_x000D_
<td>Confirm Password :</td>_x000D_
<td>_x000D_
<input type="password" name="cpwd">_x000D_
<br>_x000D_
</tr>_x000D_
<tr>_x000D_
<td>_x000D_
<input type="submit" value="Submit">_x000D_
</td>_x000D_
</tr>_x000D_
</table>_x000D_
</div>_x000D_
</form>_x000D_
</div>_x000D_
</body>_x000D_
_x000D_
</html>
_x000D_
For those who are using python 2.7, python2.7 don't support django 2 so you can't install django.urls. If you are already using python 3.6 so you need to upgrade django to latest version which is greater than 2.
On PowerShell
pip install -U django
Verification
>
PS C:\Users\xyz> python
Python 3.6.6 |Anaconda, Inc.| (default, Jul 25 2018, 15:27:00) [MSC v.1910 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>> from django.urls import path
>>>
As next prompt came, it means it is installed now and ready to use.
You cannot create a process in linux that cannot be killed. The root user (uid=0) can send a signal to a process, and there are two signals which cannot be caught, SIGKILL=9, SIGSTOP=19. And other signals (when uncaught) can also result in process termination.
You may want a more general daemonize function, where you can specify a name for your program/daemon, and a path to run your program (perhaps "/" or "/tmp"). You may also want to provide file(s) for stderr and stdout (and possibly a control path using stdin).
Here are the necessary includes:
#include <stdio.h> //printf(3)
#include <stdlib.h> //exit(3)
#include <unistd.h> //fork(3), chdir(3), sysconf(3)
#include <signal.h> //signal(3)
#include <sys/stat.h> //umask(3)
#include <syslog.h> //syslog(3), openlog(3), closelog(3)
And here is a more general function,
int
daemonize(char* name, char* path, char* outfile, char* errfile, char* infile )
{
if(!path) { path="/"; }
if(!name) { name="medaemon"; }
if(!infile) { infile="/dev/null"; }
if(!outfile) { outfile="/dev/null"; }
if(!errfile) { errfile="/dev/null"; }
//printf("%s %s %s %s\n",name,path,outfile,infile);
pid_t child;
//fork, detach from process group leader
if( (child=fork())<0 ) { //failed fork
fprintf(stderr,"error: failed fork\n");
exit(EXIT_FAILURE);
}
if (child>0) { //parent
exit(EXIT_SUCCESS);
}
if( setsid()<0 ) { //failed to become session leader
fprintf(stderr,"error: failed setsid\n");
exit(EXIT_FAILURE);
}
//catch/ignore signals
signal(SIGCHLD,SIG_IGN);
signal(SIGHUP,SIG_IGN);
//fork second time
if ( (child=fork())<0) { //failed fork
fprintf(stderr,"error: failed fork\n");
exit(EXIT_FAILURE);
}
if( child>0 ) { //parent
exit(EXIT_SUCCESS);
}
//new file permissions
umask(0);
//change to path directory
chdir(path);
//Close all open file descriptors
int fd;
for( fd=sysconf(_SC_OPEN_MAX); fd>0; --fd )
{
close(fd);
}
//reopen stdin, stdout, stderr
stdin=fopen(infile,"r"); //fd=0
stdout=fopen(outfile,"w+"); //fd=1
stderr=fopen(errfile,"w+"); //fd=2
//open syslog
openlog(name,LOG_PID,LOG_DAEMON);
return(0);
}
Here is a sample program, which becomes a daemon, hangs around, and then leaves.
int
main()
{
int res;
int ttl=120;
int delay=5;
if( (res=daemonize("mydaemon","/tmp",NULL,NULL,NULL)) != 0 ) {
fprintf(stderr,"error: daemonize failed\n");
exit(EXIT_FAILURE);
}
while( ttl>0 ) {
//daemon code here
syslog(LOG_NOTICE,"daemon ttl %d",ttl);
sleep(delay);
ttl-=delay;
}
syslog(LOG_NOTICE,"daemon ttl expired");
closelog();
return(EXIT_SUCCESS);
}
Note that SIG_IGN indicates to catch and ignore the signal. You could build a signal handler that can log signal receipt, and set flags (such as a flag to indicate graceful shutdown).
Just a note: You might have set up your service differently using the forms interface to add a service installer and project installer. In that case replace where it says serviceInstaller.ServiceName with "name from designer".ServiceName.
You also don't need the private members in this case.
Thanks for the help.
You can use asdf to install and switch between multiple java versions. It has plugins for other languages as well. You can install asdf with Homebrew
brew install asdf
When asdf is configured, install java plugin
asdf plugin-add java
Pick a version to install
asdf list-all java
For example to install and configure adoptopenjdk8
asdf install java adoptopenjdk-8.0.272+10
asdf global java adoptopenjdk-8.0.272+10
And finally if needed, configure JAVA_HOME for your shell. Just add to your shell init script such as ~/.zshrc in case of zsh:
. ~/.asdf/plugins/java/set-java-home.zsh
You can find standard sizes for everything in Google's style guide.
Here are the values they use for for buttons:
Buttons
English: Medium 14sp, all caps
Dense: Medium 15sp, all caps
Tall: Bold 15sp
I have found this way of reading strings from files to work best for me
String st, full;
full="";
BufferedReader br = new BufferedReader(new FileReader(URL));
while ((st=br.readLine())!=null) {
full+=st;
}
"full" will be the completed combination of all of the lines. If you want to add a line break between the lines of text you would do
full+=st+"\n";
class MyComponent extends Component {
constructor(props){
super(props)
this.myInput = React.createRef()
}
componentDidMount () {
console.log(this.myInput.current.offsetWidth)
}
render () {
return (
// new way - as of [email protected]
<div ref={this.myInput}>some elem</div>
// legacy way
// <div ref={(ref) => this.myInput = ref}>some elem</div>
)
}
}
this work for me in 2020 at laravel 7
$image_resize = Image::make($image->getRealPath());
$image_resize->resize(800,600);
$image_resize->save(Storage::disk('episodes')->path('') . $imgname);
so you can use it like this
echo Storage::disk('public')->path('');
Mikola has the right answer but a little more explanation. It will run the first time, but because append returns None
, after the first iteration of the for loop, your assignment will cause list1
to equal None
and therefore the error is thrown on the second iteration.
Your project is mostly likely targetting .NET Framework 4 Client Profile. Check the application tab in your project properties.
This question has a good answer on the different versions: Target framework, what does ".NET Framework ... Client Profile" mean?
>>> ord('a')
97
>>> chr(97)
'a'
I ended up doing this
typeof ($('#mySelector').data('events').click) == "object"
The following solution worked for me - open command line and write:
adb emu geo fix [longtitude] [latitude]
ser.read(64)
should be ser.read(size=64)
; ser.read uses keyword arguments, not positional.
Also, you're reading from the port twice; what you probably want to do is this:
i=0
for modem in PortList:
for port in modem:
try:
ser = serial.Serial(port, 9600, timeout=1)
ser.close()
ser.open()
ser.write("ati")
time.sleep(3)
read_val = ser.read(size=64)
print read_val
if read_val is not '':
print port
except serial.SerialException:
continue
i+=1
Add annotation @Repository to the head of userDao Class.If userDao is a interface,add this annotation to the implements of the interface.
Does Ubuntu use SELinux? Check to see if it's enabled and enforcing. /var/log/audit/audit.log may be helpul (if that's where Ubuntu sticks it -- that's the RHEL/Fedora location).
This now works for IE FF Chrome properly... I have not tested for other browsers though
$(document).ready(function(){
$('#txtInput').on("cut copy paste",function(e) {
e.preventDefault();
});
});
Edit: As pointed out by webeno, .bind()
is deprecated hence it is recommended to use .on()
instead.
Try creating a shell script like the one below:
#!/bin/bash
mysql --user=[username] --password=[password] --database=[db name] --execute="DELETE FROM tbl_message WHERE DATEDIFF( NOW( ) , timestamp ) >=7"
You can then add this to the cron
If all you're trying to do is to get attribute1 in your global namespace, version 3 seems just fine. Why is it overkill prefix ?
In version 2, instead of
from module import attribute1
you can do
attribute1 = module.attribute1
@HostListener
is a decorator for the callback/event handler method, so remove the ;
at the end of this line:
@HostListener('click', ['$event.target']);
Here's a working plunker that I generated by copying the code from the API docs, but I put the onClick()
method on the same line for clarity:
import {Component, HostListener, Directive} from 'angular2/core';
@Directive({selector: 'button[counting]'})
class CountClicks {
numberOfClicks = 0;
@HostListener('click', ['$event.target']) onClick(btn) {
console.log("button", btn, "number of clicks:", this.numberOfClicks++);
}
}
@Component({
selector: 'my-app',
template: `<button counting>Increment</button>`,
directives: [CountClicks]
})
export class AppComponent {
constructor() { console.clear(); }
}
Host binding can also be used to listen to global events:
To listen to global events, a target must be added to the event name. The target can be window, document or body (reference)
@HostListener('document:keyup', ['$event'])
handleKeyboardEvent(kbdEvent: KeyboardEvent) { ... }
The tools can now be found ("Hardware IO tools") here: https://developer.apple.com/download/more/
git ls-tree might help. To search across all existing branches:
for branch in `git for-each-ref --format="%(refname)" refs/heads`; do
echo $branch :; git ls-tree -r --name-only $branch | grep '<foo>'
done
The advantage of this is that you can also search with regular expressions for the file name.
you could try this:
I have these two columns (column "A" and column "B"). I want to color them when the values between cells in the same row mismatch.
Follow these steps:
Select the elements in column "A" (excluding A1);
Click on "Conditional formatting -> New Rule -> Use a formula to determine which cells to format";
Insert the following formula: =IF(A2<>B2;1;0);
Select the format options and click "OK";
Select the elements in column "B" (excluding B1) and repeat the steps from 2 to 4.
This following code should extract face in images and save faces on disk
def detect(image):
image_faces = []
bitmap = cv.fromarray(image)
faces = cv.HaarDetectObjects(bitmap, cascade, cv.CreateMemStorage(0))
if faces:
for (x,y,w,h),n in faces:
image_faces.append(image[y:(y+h), x:(x+w)])
#cv2.rectangle(image,(x,y),(x+w,y+h),(255,255,255),3)
return image_faces
if __name__ == "__main__":
cam = cv2.VideoCapture(0)
while 1:
_,frame =cam.read()
image_faces = []
image_faces = detect(frame)
for i, face in enumerate(image_faces):
cv2.imwrite("face-" + str(i) + ".jpg", face)
#cv2.imshow("features", frame)
if cv2.waitKey(1) == 0x1b: # ESC
print 'ESC pressed. Exiting ...'
break
If case is irrelevant, then a case-insensitive regular expression is a good solution:
'aBcDe' =~ /bcd/i # evaluates as true
This will also work for multi-line strings.
See Ruby's Regexp class for more information.
I'm using PreviewKeyDown
private void _calendar_PreviewKeyDown(object sender, PreviewKeyDownEventArgs e){
switch (e.KeyCode){
case Keys.Down:
case Keys.Right:
//action
break;
case Keys.Up:
case Keys.Left:
//action
break;
}
}
div.main{
width:100%;
height:550px;
background: url('https://images.unsplash.com/photo-1503135935062-
b7d1f5a0690f?ixlib=rb-enter code here0.3.5&ixid=eyJhcHBfaWQiOjEyMDd9&s=cf4d0c234ecaecd14f51a2343cc89b6c&dpr=1&auto=format&fit=crop&w=376&h=564&q=60&cs=tinysrgb') no-repeat;
background-position:center;
background-size:cover
}
div.main>div{
width:100px;
height:320px;
background:transparent;
background-attachment:fixed;
border-top:25px solid orange;
border-left:120px solid orange;
border-bottom:25px solid orange;
border-right:10px solid orange;
margin-left:150px
}
For People, looking for answers w.r.t to 'map' function and dynamic data, here is a working example.
<img src={"http://examole.com/randomview/images" + each_actor['logo']} />
This gives the URL as "http://examole.com/randomview/images/2/dp_pics/182328.jpg" (random example)
You can use CSS to accomplish this:
.disabled {
pointer-events: none;
cursor: default;
}
_x000D_
<a href="somelink.html" class="disabled">Some link</a>
_x000D_
Or you can use JavaScript to prevent the default action like this:
$('.disabled').click(function(e){
e.preventDefault();
})
You need just to follow those steps:
After which, if the build fails when you do Maven Install, it means there is no web.xml file under WEB-INF or some problem associated with it. it really works
It sounds like the populate method is what your looking for. First make small change to your post schema:
var postSchema = new Schema({
name: String,
postedBy: {type: mongoose.Schema.Types.ObjectId, ref: 'User'},
dateCreated: Date,
comments: [{body:"string", by: mongoose.Schema.Types.ObjectId}],
});
Then make your model:
var Post = mongoose.model('Post', postSchema);
Then, when you make your query, you can populate references like this:
Post.findOne({_id: 123})
.populate('postedBy')
.exec(function(err, post) {
// do stuff with post
});
I don't know is it bug or something but your labels and other UIs does not initialized automatically when you use custom cell. You should try this in your UICollectionViewController
class. It worked for me.
override func viewDidLoad() {
super.viewDidLoad()
let nib = UINib(nibName: "<WhateverYourNibName>", bundle: nil)
self.collectionView.registerNib(nib, forCellReuseIdentifier: "title")
}
For anyone who is aware of the risks this implementation imposes, to have the password sync to your ViewModel simply add Mode=OneWayToSource.
XAML
<PasswordBox
ff:PasswordHelper.Attach="True"
ff:PasswordHelper.Password="{Binding Path=Password, Mode=OneWayToSource}" />
You can use max() to get the max value. The max function can also return the index of the maximum value in the vector. To get this, assign the result of the call to max to a two element vector instead of just a single variable.
e.g. z is your array,
>> [x, y] = max(z)
x =
7
y =
4
Here, 7 is the largest number at the 4th position(index).
The format for HTTP headers is defined in the HTTP specification. I'm going to talk about HTTP 1.1, for which the specification is RFC 2616. In section 4.2, 'Message Headers', the general structure of a header is defined:
message-header = field-name ":" [ field-value ]
field-name = token
field-value = *( field-content | LWS )
field-content = <the OCTETs making up the field-value
and consisting of either *TEXT or combinations
of token, separators, and quoted-string>
This definition rests on two main pillars, token and TEXT. Both are defined in section 2.2, 'Basic Rules'. Token is:
token = 1*<any CHAR except CTLs or separators>
In turn resting on CHAR, CTL and separators:
CHAR = <any US-ASCII character (octets 0 - 127)>
CTL = <any US-ASCII control character
(octets 0 - 31) and DEL (127)>
separators = "(" | ")" | "<" | ">" | "@"
| "," | ";" | ":" | "\" | <">
| "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT
TEXT is:
TEXT = <any OCTET except CTLs,
but including LWS>
Where LWS is linear white space, whose definition i won't reproduce, and OCTET is:
OCTET = <any 8-bit sequence of data>
There is a note accompanying the definition:
The TEXT rule is only used for descriptive field contents and values
that are not intended to be interpreted by the message parser. Words
of *TEXT MAY contain characters from character sets other than ISO-
8859-1 [22] only when encoded according to the rules of RFC 2047
[14].
So, two conclusions. Firstly, it's clear that the header name must be composed from a subset of ASCII characters - alphanumerics, some punctuation, not a lot else. Secondly, there is nothing in the definition of a header value that restricts it to ASCII or excludes 8-bit characters: it's explicitly composed of octets, with only control characters barred (note that CR and LF are considered controls). Furthermore, the comment on the TEXT production implies that the octets are to be interpreted as being in ISO-8859-1, and that there is an encoding mechanism (which is horrible, incidentally) for representing characters outside that encoding.
So, to respond to @BalusC in particular, it's quite clear that according to the specification, header values are in ISO-8859-1. I've sent high-8859-1 characters (specifically, some accented vowels as used in French) in a header out of Tomcat, and had them interpreted correctly by Firefox, so to some extent, this works in practice as well as in theory (although this was a Location header, which contains a URL, and these characters are not legal in URLs, so this was actually illegal, but under a different rule!).
That said, i wouldn't rely on ISO-8859-1 working across all servers, proxies, and clients, so i would stick to ASCII as a matter of defensive programming.
I see that no good desciption for using numpy.nditer() is here. So, I am gonna go with one. According to NumPy v1.21 dev0 manual, The iterator object nditer, introduced in NumPy 1.6, provides many flexible ways to visit all the elements of one or more arrays in a systematic fashion.
I have to calculate mean_squared_error and I have already calculate y_predicted and I have y_actual from the boston dataset, available with sklearn.
def cal_mse(y_actual, y_predicted):
""" this function will return mean squared error
args:
y_actual (ndarray): np array containing target variable
y_predicted (ndarray): np array containing predictions from DecisionTreeRegressor
returns:
mse (integer)
"""
sq_error = 0
for i in np.nditer(np.arange(y_pred.shape[0])):
sq_error += (y_actual[i] - y_predicted[i])**2
mse = 1/y_actual.shape[0] * sq_error
return mse
Hope this helps :). for further explaination visit
Say you make a pull, merge it into your code, and decide you don't like it. Use git-log, or tig, and find the hash of wherever you want to go back to (probably your last commit before the pull/merge) copy the hash, and do:
# Revert to a previous commit by hash:
git-reset --hard <hash>
Instead of the hash, you can use HEAD^ as a shortcut for the previous commit.
# Revert to previous commit:
git-reset --hard HEAD^
I was able to use Find & Replace with the "Find what:" input field set to:
" * "
(space asterisk space with no double-quotes)
and "Replace with:" set to:
""
(nothing)
All objects in python are implemented via references so the distinction between objects and pointers to objects does not exist in source code.
The python equivalent of NULL
is called None
(good info here). As all objects in python are implemented via references, you can re-write your struct to look like this:
class Node:
def __init__(self): #object initializer to set attributes (fields)
self.val = 0
self.right = None
self.left = None
And then it works pretty much like you would expect:
node = Node()
node.val = some_val #always use . as everything is a reference and -> is not used
node.left = Node()
Note that unlike in NULL
in C, None
is not a "pointer to nowhere": it is actually the only instance of class NoneType
.
Therefore, as None
is a regular object, you can test for it just like any other object:
if node.left == None:
print("The left node is None/Null.")
Although since None
is a singleton instance, it is considered more idiomatic to use is
and compare for reference equality:
if node.left is None:
print("The left node is None/Null.")
When you face the following issue:
PHP throwing error "Warning: mysql_connect() http://function.mysql-connect: 2002 No such file or directory (trying to connect via unix:///tmp/mysql.sock)"
Set "mysql.default_socket" value in your /etc/php.ini
to
"mysql.default_socket = /var/mysql/mysql.sock".
Then restart web service in server admin
Simply you can save with extension .json but while saving you have to do some changes.
Change Save as type in red circle in image to All Files.
It will create .json file with name bharti.json.
To check this --> Right click at file --> Properties --> Type of file: JSON File (.json)
pip has a --no-dependencies
switch. You should use that.
For more information, run pip install -h
, where you'll see this line:
--no-deps, --no-dependencies
Ignore package dependencies
Once changes has been committed it will not be able to delete. because commit's basic nature is not to delete.
Thing you can do (easy and safe method),
Interactive Rebase:
1) git rebase -i HEAD~2
#will show your recent 2 commits
2) Your commit will list like , Recent will appear at the bottom of the page LILO(last in Last Out)
Delete the last commit row entirely
3) save it by ctrl+X
or ESC:wq
now your branch will updated without your last commit..
Assume that we need to view some data in command prompt which are coming from a database table. First we create a list. Team_Details is my property class.
List<Team_Details> teamDetails = new List<Team_Details>();
Then you can connect to the database and do the data retrieving part and save it to the list as follows.
string connetionString = "Data Source=.;Initial Catalog=your DB name;Integrated Security=True;MultipleActiveResultSets=True";
using (SqlConnection conn = new SqlConnection(connetionString)){
string getTeamDetailsQuery = "select * from Team";
conn.Open();
using (SqlCommand cmd = new SqlCommand(getTeamDetailsQuery, conn))
{
SqlDataReader rdr = cmd.ExecuteReader();
{
teamDetails.Add(new Team_Details
{
Team_Name = rdr.GetString(rdr.GetOrdinal("Team_Name")),
Team_Lead = rdr.GetString(rdr.GetOrdinal("Team_Lead")),
});
}
Then you can print this list in command prompt as follows.
foreach (Team_Details i in teamDetails)
{
Console.WriteLine(i.Team_Name);
Console.WriteLine(i.Team_Lead);
}
If using PostgreSql 9.5.1, please follow the below configuration:
In my case it was user error. I was using the root
user with an invalid password. I am not sure why I didn't get an auth error but instead received this cryptic message.
just a point,
numbers = [int(x) for x in numbers]
the list comprehension is more natural, while
numbers = map(int, numbers)
is faster.
Probably this will not matter in most cases
Useful read: LP vs map
Do an svn update in the trunk, note the revision number.
From the trunk:
svn merge -r<revision where branch was cut>:<revision of trunk> svn://path/to/branch/branchName
You can check where the branch was cut from the trunk by doing an svn log
svn log --stop-on-copy
After much pain, and great assistance from @vitr et al above, i decided to try
and that worked.
ENV LISTEN_PORT=""
ENTRYPOINT java -cp "app:app/lib/*" hello.Application --server.port=${LISTEN_PORT:-80}
e.g.
docker run --rm -p 8080:8080 -d --env LISTEN_PORT=8080 my-image
and
docker run --rm -p 8080:80 -d my-image
both set the port correctly in my container
see https://www.cyberciti.biz/tips/bash-shell-parameter-substitution-2.html
You can achieve this using exists
:
DELETE
FROM table1
WHERE exists(
SELECT 1
FROM table2
WHERE table2.stn = table1.stn
and table2.jaar = year(table1.datum)
)
$fp = fopen('lidn.txt', 'w');
fwrite($fp, 'Cats chase');
fwrite($fp, 'mice');
fclose($fp);
[tup for tup in a if tup[0] == 1]
AES is the currently accepted standard algorithm to use (hence the name Advanced Encryption Standard).
The rest are not.
Just (array)
is missing in your code before the simplexml object:
...
$xml = simplexml_load_string($string, 'SimpleXMLElement', LIBXML_NOCDATA);
$array = json_decode(json_encode((array)$xml), TRUE);
^^^^^^^
...
Initially starting with a pyspark dataframes - I got type conversion errors (when converting to pandas df's and then appending to csv) given the schema/column types in my pyspark dataframes
Solved the problem by forcing all columns in each df to be of type string and then appending this to csv as follows:
with open('testAppend.csv', 'a') as f:
df2.toPandas().astype(str).to_csv(f, header=False)
If you have Mi Device than you need to enable this two option after enabling Developer Mode.
See this screenshot.
I found a solution to implement this with the help of the Apple Developer Forums:
location background mode
NSTimer
in the background with UIApplication:beginBackgroundTaskWithExpirationHandler:
n
is smaller than UIApplication:backgroundTimeRemaining
it will work just fine. When n
is larger, the location manager
should be enabled (and disabled) again before there is no time remaining to avoid the background task being killed. This works because location is one of the three allowed types of background execution.
Note: I lost some time by testing this in the simulator where it doesn't work. However, it works fine on my phone.
In order to get the PHP output into the HTML file you need to either
If you're on SQL Server 2005 or up, you can use this FOR XML PATH & STUFF
trick:
DECLARE @CodeNameString varchar(100)
SELECT
@CodeNameString = STUFF( (SELECT ',' + CodeName
FROM dbo.AccountCodes
ORDER BY Sort
FOR XML PATH('')),
1, 1, '')
The FOR XML PATH('')
basically concatenates your strings together into one, long XML result (something like ,code1,code2,code3
etc.) and the STUFF
puts a "nothing" character at the first character, e.g. wipes out the "superfluous" first comma, to give you the result you're probably looking for.
UPDATE: OK - I understand the comments - if your text in the database table already contains characters like <
, >
or &
, then my current solution will in fact encode those into <
, >
, and &
.
If you have a problem with that XML encoding - then yes, you must look at the solution proposed by @KM which works for those characters, too. One word of warning from me: this approach is a lot more resource and processing intensive - just so you know.
Check out colorama. It doesn't necessarily help with bolding... but you can do colorized output on both Windows and Linux, and control the brightness:
from colorama import *
init(autoreset=True)
print Fore.RED + 'some red text'
print Style.BRIGHT + Fore.RED + 'some bright red text'
Caveat: I'm running Ubuntu
sudo service --status-all
you can get a list of all running services by typing this command,
If you're running Tomcat as a service it will showes up as ("tomcat"), so run :
sudo service tomcat7 stop
(tomcat7 or 8 or depending to the name that you have in the list of running services )
else and if you are using apache tomcat you will see ("apache2") showing up with the list of services then run :
sudo service apache2 stop
I had a user control which sat on page in a free form way, not constrained by another container, and the contents within the user control would not auto size but expand to the full size of what the user control was handed.
To get the user control to simply size to its content, for height only, I placed it into a grid with on row set to auto size such as this:
<Grid Margin="0,60,10,200">
<Grid.RowDefinitions>
<RowDefinition Height="Auto" />
</Grid.RowDefinitions>
<controls1:HelpPanel x:Name="HelpInfoPanel"
Visibility="Visible"
Width="570"
HorizontalAlignment="Right"
ItemsSource="{Binding HelpItems}"
Background="#FF313131" />
</Grid>
I didnt try Sumama Waheed's answer but what worked for me was replacing the bin/catalina.jar with a working jar (I disposed of an older tomcat) and after adding in NetBeans, I put the original catalina.jar again.
This is a straight way to do this.
The case is simple, but finally quite common ( typical thumbnails scroller with fixed cell size and fixed gap between cells )
var itemCellSize: CGSize = <your cell size>
var itemCellsGap: CGFloat = <gap in between>
override func scrollViewWillEndDragging(_ scrollView: UIScrollView, withVelocity velocity: CGPoint, targetContentOffset: UnsafeMutablePointer<CGPoint>) {
let pageWidth = (itemCellSize.width + itemCellsGap)
let itemIndex = (targetContentOffset.pointee.x) / pageWidth
targetContentOffset.pointee.x = round(itemIndex) * pageWidth - (itemCellsGap / 2)
}
// CollectionViewFlowLayoutDelegate
func collectionView(_ collectionView: UICollectionView, layout collectionViewLayout: UICollectionViewLayout, sizeForItemAt indexPath: IndexPath) -> CGSize {
return itemCellSize
}
func collectionView(_ collectionView: UICollectionView, layout collectionViewLayout: UICollectionViewLayout, minimumLineSpacingForSectionAt section: Int) -> CGFloat {
return itemCellsGap
}
Note that there is no reason to call a scrollToOffset or dive into layouts. The native scrolling behaviour already does everything.
Cheers All :)
Create a "jump link" using the following format:
http://www.somesite.com/somepage#anchor
Where anchor is the id of the element you wish to link to on that page. Use browser development tools / view source to find the id of the element you wish to link to.
If the element doesnt have an id and you dont control that site then you cant do it.
Here is an example of SIGSEGV.
root@pierr-desktop:/opt/playGround# cat test.c
int main()
{
int * p ;
* p = 0x1234;
return 0 ;
}
root@pierr-desktop:/opt/playGround# g++ -o test test.c
root@pierr-desktop:/opt/playGround# ./test
Segmentation fault
And here is the detail.
How to handle it?
Avoid it as much as possible in the first place.
Program defensively: use assert(), check for NULL pointer , check for buffer overflow.
Use static analysis tools to examine your code.
compile your code with -Werror -Wall.
Has somebody review your code.
When that actually happened.
Examine you code carefully.
Check what you have changed since the last time you code run successfully without crash.
Hopefully, gdb will give you a call stack so that you know where the crash happened.
EDIT : sorry for a rush. It should be *p = 0x1234;
instead of p = 0x1234
;
System.getProperty("user.name") is not a good security option since that environment variable could be faked: C:\ set USERNAME="Joe Doe" java ... // will give you System.getProperty("user.name") You ought to do:
com.sun.security.auth.module.NTSystem NTSystem = new com.sun.security.auth.module.NTSystem();
System.out.println(NTSystem.getName());
JDK 1.5 and greater.
I use it within an applet, and it has to be signed. info source
When you override OnCreateView
in your RouteSearchFragment
class, do you have the
if(view != null) {
return view;
}
code segment?
If so, removing the return statement should solve your problem.
You can keep the code and return the view if you don't want to regenerate view data, and onDestroyView() method you remove this view from its parent like so:
@Override
public void onDestroyView() {
super.onDestroyView();
if (view != null) {
ViewGroup parent = (ViewGroup) view.getParent();
if (parent != null) {
parent.removeAllViews();
}
}
}
This works to me:
public static void shareWhatsApp(Activity appActivity, String texto) {
Intent sendIntent = new Intent(Intent.ACTION_SEND);
sendIntent.setType("text/plain");
sendIntent.putExtra(android.content.Intent.EXTRA_TEXT, texto);
PackageManager pm = appActivity.getApplicationContext().getPackageManager();
final List<ResolveInfo> matches = pm.queryIntentActivities(sendIntent, 0);
boolean temWhatsApp = false;
for (final ResolveInfo info : matches) {
if (info.activityInfo.packageName.startsWith("com.whatsapp")) {
final ComponentName name = new ComponentName(info.activityInfo.applicationInfo.packageName, info.activityInfo.name);
sendIntent.addCategory(Intent.CATEGORY_LAUNCHER);
sendIntent.setFlags(Intent.FLAG_ACTIVITY_NO_HISTORY | Intent.FLAG_ACTIVITY_NEW_TASK);
sendIntent.setComponent(name);
temWhatsApp = true;
break;
}
}
if(temWhatsApp) {
//abre whatsapp
appActivity.startActivity(sendIntent);
} else {
//alerta - você deve ter o whatsapp instalado
Toast.makeText(appActivity, appActivity.getString(R.string.share_whatsapp), Toast.LENGTH_SHORT).show();
}
}
Combining what I learned in this thread and in this one, when I want to see "what is inside the stash", I first run:
git stash show stash@{0}
That will show what files were modified. Then, to get a nice visual diff in a difftool, I do:
git difftool --dir-diff stash@{0} stash@{0}^
This will display all the differences at once of the given stash against its parent.
You can configure the diff tool in ~/.gitconfig
, e.g. with Meld:
...
[diff]
tool = meld
While checking the build log, I noticed a warning:
note: Using new build system
note: Planning build
note: Constructing build description
Build system information
warning: The Copy Bundle Resources build phase contains this target's Info.plist file '/Users/<redacted>/Repositories/Whitesmith/optimize-ios/Carthage/Checkouts/WSStatusBarNotification/Miscellaneous/Info.plist'. (in target 'JDStatusBarNotification')
So, if that's your case then just go to your target:
info.plist
.If you code C or C++ language. I think we are lucky because we could use a file to input. It is so convenient and clear. I often do that. This is argument to implement it :
{
freopen("inputfile", "r", stdin);
}
Notice that inputfile must locate at same directory with source code file, r is stand for read.
It represents the scope (the lifetime) of the bean. This is easier to understand if you are familiar with "under the covers" working of a basic servlet web application: How do servlets work? Instantiation, sessions, shared variables and multithreading.
@Request/View/Flow/Session/ApplicationScoped
A @RequestScoped
bean lives as long as a single HTTP request-response cycle (note that an Ajax request counts as a single HTTP request too). A @ViewScoped
bean lives as long as you're interacting with the same JSF view by postbacks which call action methods returning null
/void
without any navigation/redirect. A @FlowScoped
bean lives as long as you're navigating through the specified collection of views registered in the flow configuration file. A @SessionScoped
bean lives as long as the established HTTP session. An @ApplicationScoped
bean lives as long as the web application runs. Note that the CDI @Model
is basically a stereotype for @Named @RequestScoped
, so same rules apply.
Which scope to choose depends solely on the data (the state) the bean holds and represents. Use @RequestScoped
for simple and non-ajax forms/presentations. Use @ViewScoped
for rich ajax-enabled dynamic views (ajaxbased validation, rendering, dialogs, etc). Use @FlowScoped
for the "wizard" ("questionnaire") pattern of collecting input data spread over multiple pages. Use @SessionScoped
for client specific data, such as the logged-in user and user preferences (language, etc). Use @ApplicationScoped
for application wide data/constants, such as dropdown lists which are the same for everyone, or managed beans without any instance variables and having only methods.
Abusing an @ApplicationScoped
bean for session/view/request scoped data would make it to be shared among all users, so anyone else can see each other's data which is just plain wrong. Abusing a @SessionScoped
bean for view/request scoped data would make it to be shared among all tabs/windows in a single browser session, so the enduser may experience inconsitenties when interacting with every view after switching between tabs which is bad for user experience. Abusing a @RequestScoped
bean for view scoped data would make view scoped data to be reinitialized to default on every single (ajax) postback, causing possibly non-working forms (see also points 4 and 5 here). Abusing a @ViewScoped
bean for request, session or application scoped data, and abusing a @SessionScoped
bean for application scoped data doesn't affect the client, but it unnecessarily occupies server memory and is plain inefficient.
Note that the scope should rather not be chosen based on performance implications, unless you really have a low memory footprint and want to go completely stateless; you'd need to use exclusively @RequestScoped
beans and fiddle with request parameters to maintain the client's state. Also note that when you have a single JSF page with differently scoped data, then it's perfectly valid to put them in separate backing beans in a scope matching the data's scope. The beans can just access each other via @ManagedProperty
in case of JSF managed beans or @Inject
in case of CDI managed beans.
@CustomScoped/NoneScoped/Dependent
It's not mentioned in your question, but (legacy) JSF also supports @CustomScoped
and @NoneScoped
, which are rarely used in real world. The @CustomScoped
must refer a custom Map<K, Bean>
implementation in some broader scope which has overridden Map#put()
and/or Map#get()
in order to have more fine grained control over bean creation and/or destroy.
The JSF @NoneScoped
and CDI @Dependent
basically lives as long as a single EL-evaluation on the bean. Imagine a login form with two input fields referring a bean property and a command button referring a bean action, thus with in total three EL expressions, then effectively three instances will be created. One with the username set, one with the password set and one on which the action is invoked. You normally want to use this scope only on beans which should live as long as the bean where it's being injected. So if a @NoneScoped
or @Dependent
is injected in a @SessionScoped
, then it will live as long as the @SessionScoped
bean.
As last, JSF also supports the flash scope. It is backed by a short living cookie which is associated with a data entry in the session scope. Before the redirect, a cookie will be set on the HTTP response with a value which is uniquely associated with the data entry in the session scope. After the redirect, the presence of the flash scope cookie will be checked and the data entry associated with the cookie will be removed from the session scope and be put in the request scope of the redirected request. Finally the cookie will be removed from the HTTP response. This way the redirected request has access to request scoped data which was been prepared in the initial request.
This is actually not available as a managed bean scope, i.e. there's no such thing as @FlashScoped
. The flash scope is only available as a map via ExternalContext#getFlash()
in managed beans and #{flash}
in EL.
After looking through all the answers in here, hasOwnProperty isn't required for my own usage because my json object is clean; there's really no sense in adding any additional javascript processing. This is all I'm using:
for (var key in p) {
console.log(key + ' => ' + p[key]);
// key is key
// value is p[key]
}
In case someone else runs into this problem, I just did using Eclipse; running the project via the right click action. This error occurred in the J2EE view, but did NOT occur in the Java view. Not sure - assuming something with adding libraries to the correct 'lib' directory.
I am also using a Maven project, allowing m2eclipse to manage dependancies.
I have tried this code and It's working fine in my case.
DELETE FROM NG_USR_0_CLIENT_GRID_NEW WHERE rowid IN
( SELECT rowid FROM
(
SELECT wi_name, relationship, ROW_NUMBER() OVER (ORDER BY rowid DESC) RN
FROM NG_USR_0_CLIENT_GRID_NEW
WHERE wi_name = 'NB-0000001385-Process'
)
WHERE RN=2
);
If you are using Xcode 8.0+ and Swift 2.2+ or even Objective C:
If you want to allow HTTP connections to any site, you can use this keys:
<key>NSAppTransportSecurity</key>
<dict>
<key>NSAllowsArbitraryLoads</key>
<true/>
</dict>
If you know which domains you will connect to add:
<key>NSAppTransportSecurity</key>
<dict>
<key>NSExceptionDomains</key>
<dict>
<key>example.com</key>
<dict>
<key>NSExceptionAllowsInsecureHTTPLoads</key>
<true/>
<key>NSIncludesSubdomains</key>
<true/>
</dict>
</dict>
</dict>
As a complement to the answers given above; do not forget about Form MinimumSize Property, in case you require to create smaller Forms.
Example Bellow:
private void SetDefaultWindowSize()
{
int sizeW, sizeH;
sizeW = 180;
sizeH = 100;
var size = new Size(sizeW, sizeH);
Size = size;
MinimumSize = size;
}
private void SetNewSize()
{
Size = new Size(Width, 10);
}
isset is testing whether or not the key you are checking in the hash (or associative array) is "set". Set in this context just means if it knows the value. Nothing is a value. So it is defined as being an empty string.
For that reason, as long as you have an input field named userName, regardless of if they fill it in, this will be true. What you really want to do is check if the userName is equal to an empty string ''
Here's a cross browser function I have in my standard library:
function getCursorPos(input) {
if ("selectionStart" in input && document.activeElement == input) {
return {
start: input.selectionStart,
end: input.selectionEnd
};
}
else if (input.createTextRange) {
var sel = document.selection.createRange();
if (sel.parentElement() === input) {
var rng = input.createTextRange();
rng.moveToBookmark(sel.getBookmark());
for (var len = 0;
rng.compareEndPoints("EndToStart", rng) > 0;
rng.moveEnd("character", -1)) {
len++;
}
rng.setEndPoint("StartToStart", input.createTextRange());
for (var pos = { start: 0, end: len };
rng.compareEndPoints("EndToStart", rng) > 0;
rng.moveEnd("character", -1)) {
pos.start++;
pos.end++;
}
return pos;
}
}
return -1;
}
Use it in your code like this:
var cursorPosition = getCursorPos($('#myTextarea')[0])
Here's its complementary function:
function setCursorPos(input, start, end) {
if (arguments.length < 3) end = start;
if ("selectionStart" in input) {
setTimeout(function() {
input.selectionStart = start;
input.selectionEnd = end;
}, 1);
}
else if (input.createTextRange) {
var rng = input.createTextRange();
rng.moveStart("character", start);
rng.collapse();
rng.moveEnd("character", end - start);
rng.select();
}
}
I had some data I had to get from mssql into mysql, had difficulty finding a solution. So what I did in the end (a bit of a long winded way to do it, but as a last resort it works) was:
Click the top left corner box to select whole table:
Copy data to clipboard (ctrl + v)
Hope this helps
Your code looks correct. Try logging in through your browser and if you are able to access your account come back and try your code again. Just make sure that you have typed your username and password correct
EDIT: Google blocks sign-in attempts from apps which do not use modern security standards (mentioned on their support page). You can however, turn on/off this safety feature by going to the link below:
Go to this link and select Turn On
https://www.google.com/settings/security/lesssecureapps
For Windows users: You can do as RTA said or through command line do this: Navigate to the locaiton of the eclipse executable then run:
eclipse.lnk -clean
First check the name of your executable using the command 'dir' on its path
Lots of good advince in the other posts. This is what I use:
Key key;
SecureRandom rand = new SecureRandom();
KeyGenerator generator = KeyGenerator.getInstance("AES");
generator.init(256, rand);
key = generator.generateKey();
If you need another randomness provider, which I sometime do for testing purposes, just replace rand with
MySecureRandom rand = new MySecureRandom();
I was surprised to read section 3.3.2 about rejecting cookies:
http://tools.ietf.org/html/rfc2965
That says that a browser should reject a cookie from x.y.z.com with domain .z.com, because 'x.y' contains a dot. So, unless I am misinterpreting the RFC and/or the questions above, there could be questions added:
Will a cookie for .example.com be available for www.yyy.example.com? No.
Will a cookie set by origin server www.yyy.example.com, with domain .example.com, have it's value sent by the user agent to xxx.example.com? No.
You cannot set or read cookies on CORS requests through JavaScript. Although CORS allows cross-origin requests, the cookies are still subject to the browser's same-origin policy, which means only pages from the same origin can read/write the cookie. withCredentials
only means that any cookies set by the remote host are sent to that remote host. You will have to set the cookie from the remote server by using the Set-Cookie
header.
The code given in the question can be better written as follows
function checkIfArrayIsUnique(myArray)
{
for (var i = 0; i < myArray.length; i++)
{
for (var j = i+1; j < myArray.length; j++)
{
if (myArray[i] == myArray[j])
{
return true; // means there are duplicate values
}
}
}
return false; // means there are no duplicate values.
}
JWPL - Java-based Wikipedia Library -- An application programming interface for Wikipedia
You have to execute your query and add single quote to $email in the query beacuse it's a string, and remove the is_resource($query)
$query is a string, the $result will be the resource
$query = "SELECT `email` FROM `tblUser` WHERE `email` = '$email'";
$result = mysqli_query($link,$query); //$link is the connection
if(mysqli_num_rows($result) > 0 ){....}
UPDATE
Base in your edit just change:
if(is_resource($query) && mysqli_num_rows($query) > 0 ){
$query = mysqli_fetch_assoc($query);
echo $email . " email exists " . $query["email"] . "\n";
By
if(is_resource($result) && mysqli_num_rows($result) == 1 ){
$row = mysqli_fetch_assoc($result);
echo $email . " email exists " . $row["email"] . "\n";
and you will be fine
UPDATE 2
A better way should be have a Store Procedure that execute the following SQL passing the Email as Parameter
SELECT IF( EXISTS (
SELECT *
FROM `Table`
WHERE `email` = @Email)
, 1, 0) as `Exist`
and retrieve the value in php
Pseudocodigo:
$query = Call MYSQL_SP($EMAIL);
$result = mysqli_query($conn,$query);
$row = mysqli_fetch_array($result)
$exist = ($row['Exist']==1)? 'the email exist' : 'the email doesnt exist';
There is a prebuilt bootstrap bower package called bootstrap-css. I think this is what you (and I) were hoping to find.
bower install bootstrap-css
Thanks Nico.
Since you've got both the shell that you're typing into and the shell that sudo -s
runs, you need to quote or escape twice. (EDITED fixed quoting)
sudo -su db2inst1 '/opt/ibm/db2/V9.7/bin/db2 force application \(1995\)'
or
sudo -su db2inst1 /opt/ibm/db2/V9.7/bin/db2 force application \\\(1995\\\)
Out of curiosity, why do you need -s? Can't you just do this:
sudo -u db2inst1 /opt/ibm/db2/V9.7/bin/db2 force application \(1995\)
I researched on the internet and some answers includes enabling the "access for lesser app" and "unlocking gmail captcha" which sadly didn't work for me until I found the 2-step verification.
What I did the following was:
enable the 2-step verification to google HERE
Create App Password to be use by your system HERE
I selected Others (custom name) and clicked generate
Went to my env file in laravel and edited this
MAIL_PASSWORD=thepasswordgenerated
This was my solution. I created this to atleast make other people not go wasting their time researching for a possible answer.
I usually expand each log out into it's own channel and then to a separate log file, certainly makes things easier when you are trying to debug specific issues. So my logging section looks like the following:
logging {
channel default_file {
file "/var/log/named/default.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel general_file {
file "/var/log/named/general.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel database_file {
file "/var/log/named/database.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel security_file {
file "/var/log/named/security.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel config_file {
file "/var/log/named/config.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel resolver_file {
file "/var/log/named/resolver.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel xfer-in_file {
file "/var/log/named/xfer-in.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel xfer-out_file {
file "/var/log/named/xfer-out.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel notify_file {
file "/var/log/named/notify.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel client_file {
file "/var/log/named/client.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel unmatched_file {
file "/var/log/named/unmatched.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel queries_file {
file "/var/log/named/queries.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel network_file {
file "/var/log/named/network.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel update_file {
file "/var/log/named/update.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel dispatch_file {
file "/var/log/named/dispatch.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel dnssec_file {
file "/var/log/named/dnssec.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
channel lame-servers_file {
file "/var/log/named/lame-servers.log" versions 3 size 5m;
severity dynamic;
print-time yes;
};
category default { default_file; };
category general { general_file; };
category database { database_file; };
category security { security_file; };
category config { config_file; };
category resolver { resolver_file; };
category xfer-in { xfer-in_file; };
category xfer-out { xfer-out_file; };
category notify { notify_file; };
category client { client_file; };
category unmatched { unmatched_file; };
category queries { queries_file; };
category network { network_file; };
category update { update_file; };
category dispatch { dispatch_file; };
category dnssec { dnssec_file; };
category lame-servers { lame-servers_file; };
};
Hope this helps.
If this is a Windows app, try checking for a duplicate in the Global Assembly Cache (GAC). Something is overriding your bin / debug version.
If this is a web app, you may need to delete on server and re-upload. If you are publishing you may want to check the Delete all existing files prior to publish check box. Depending on Visual Studio version it should be located in Publish > Settings > File Publish Options
I ran into this problem as well, it ended up that I had two postgres servers running at the same time. I uninstalled one of them and changed the port back to 5432 and works fine now.
You can use react-native-view-overflow
plugin for placing a view on top of another. It works like the CSS z-index property.
import ViewOverflow from 'react-native-view-overflow';
<ViewOverflow />
<View style={[styles2.cardBox, { marginTop: 50 }]}>
<View style={[styles2.cardItem]} >
<Text style={styles2.cardHeader}>userList</Text>
</View>
<View style={[styles2.cardContent]}>
<Text style={styles2.text}>overflow: "visible"</Text>
</View>
<View style={[styles2.cardItemFooter]} >
<Text style={styles2.cardTextFooter}>...</Text>
</View>
</View>
</ViewOverflow>
const styles2 = StyleSheet.create({
cardBox: {
borderLeftWidth: 0,
borderTopWidth: 0,
backgroundColor: "transparent",
borderWidth: 1,
borderColor: "#d0d0d0",
width: '94%',
alignSelf: 'center',
height: 200,
position: "relative",
borderRadius: 15,
overflow: "visible" // doesn't do anything
},
cardContent: {
textAlign: "right",
backgroundColor: "transparent",
marginTop: 15,
alignSelf: 'flex-end',
padding: 5,
},
cardHeader: {
color: '#fff',
fontFamily: 'Vazir',
fontSize: 12
},
cardItem: {
backgroundColor: "#3c4252",
borderRadius: 3,
position: "absolute",
top: -10,
right: -5,
width: 50,
height: 20,
paddingRight: 5,
},
})
If you have access to the iframed page you could use something like easyXDM to make function calls in the iframe and return the data.
If you don't have access to the iframed page you will have to use a server side solution. With PHP you could do something quick and dirty like:
<?php echo file_get_contents('http://url_of_the_iframe/content.php'); ?>
Check out fontsquirrel. They have a web font generator, which will also spit out a suitable stylesheet for your font (look for "@font-face kit"). This stylesheet can be included in your own, or you can use it as a template.
to allow periods and any other character just add them like so:
change: '#[^a-zA-Z ]#
'
to:'#[^a-zA-Z .()!]#
'
Like @user293153 I only just discovered this question and it didn't seem to be answered correctly.
His answer was best. But you can also animate to the element as well.
$('html, body').animate({ scrollTop: $("#some_element").offset().top }, 500);
You have a few options other than using public key authentication:
If you decide to give sshpass a chance here is a working script snippet to do so:
export SSHPASS=your-password-here
sshpass -e sftp -oBatchMode=no -b - sftp-user@remote-host << !
cd incoming
put your-log-file.log
bye
!
Here is an example of initializing a boolean[][]:
const n = 8; // or some dynamic value
const palindrome: boolean[][] = new Array(n)
.fill(false)
.map(() => new Array(n)
.fill(false));
grant all on *.* to 'username'@'%' identified by 'password' with grant option;
example:
grant all on *.* to 'web2vi'@'%' identified by 'password' with grant option;
If you are passing data to a DOM element from the server, you should set the data on the element:
<a id="foo" data-foo="bar" href="#">foo!</a>
The data can then be accessed using .data()
in jQuery:
console.log( $('#foo').data('foo') );
//outputs "bar"
However when you store data on a DOM node in jQuery using data, the variables are stored on the node object. This is to accommodate complex objects and references as storing the data on the node element as an attribute will only accommodate string values.
Continuing my example from above:$('#foo').data('foo', 'baz');
console.log( $('#foo').attr('data-foo') );
//outputs "bar" as the attribute was never changed
console.log( $('#foo').data('foo') );
//outputs "baz" as the value has been updated on the object
Also, the naming convention for data attributes has a bit of a hidden "gotcha":
HTML:<a id="bar" data-foo-bar-baz="fizz-buzz" href="#">fizz buzz!</a>
JS:
console.log( $('#bar').data('fooBarBaz') );
//outputs "fizz-buzz" as hyphens are automatically camelCase'd
The hyphenated key will still work:
HTML:<a id="bar" data-foo-bar-baz="fizz-buzz" href="#">fizz buzz!</a>
JS:
console.log( $('#bar').data('foo-bar-baz') );
//still outputs "fizz-buzz"
However the object returned by .data()
will not have the hyphenated key set:
$('#bar').data().fooBarBaz; //works
$('#bar').data()['fooBarBaz']; //works
$('#bar').data()['foo-bar-baz']; //does not work
It's for this reason I suggest avoiding the hyphenated key in javascript.
For HTML, keep using the hyphenated form. HTML attributes are supposed to get ASCII-lowercased automatically, so <div data-foobar></div>
, <DIV DATA-FOOBAR></DIV>
, and <dIv DaTa-FoObAr></DiV>
are supposed to be treated as identical, but for the best compatibility the lower case form should be preferred.
The .data()
method will also perform some basic auto-casting if the value matches a recognized pattern:
<a id="foo"
href="#"
data-str="bar"
data-bool="true"
data-num="15"
data-json='{"fizz":["buzz"]}'>foo!</a>
JS:
$('#foo').data('str'); //`"bar"`
$('#foo').data('bool'); //`true`
$('#foo').data('num'); //`15`
$('#foo').data('json'); //`{fizz:['buzz']}`
This auto-casting ability is very convenient for instantiating widgets & plugins:
$('.widget').each(function () {
$(this).widget($(this).data());
//-or-
$(this).widget($(this).data('widget'));
});
If you absolutely must have the original value as a string, then you'll need to use .attr()
:
<a id="foo" href="#" data-color="ABC123"></a>
<a id="bar" href="#" data-color="654321"></a>
JS:
$('#foo').data('color').length; //6
$('#bar').data('color').length; //undefined, length isn't a property of numbers
$('#foo').attr('data-color').length; //6
$('#bar').attr('data-color').length; //6
This was a contrived example. For storing color values, I used to use numeric hex notation (i.e. 0xABC123), but it's worth noting that hex was parsed incorrectly in jQuery versions before 1.7.2, and is no longer parsed into a Number
as of jQuery 1.8 rc 1.
jQuery 1.8 rc 1 changed the behavior of auto-casting. Before, any format that was a valid representation of a Number
would be cast to Number
. Now, values that are numeric are only auto-cast if their representation stays the same. This is best illustrated with an example.
<a id="foo"
href="#"
data-int="1000"
data-decimal="1000.00"
data-scientific="1e3"
data-hex="0x03e8">foo!</a>
JS:
// pre 1.8 post 1.8
$('#foo').data('int'); // 1000 1000
$('#foo').data('decimal'); // 1000 "1000.00"
$('#foo').data('scientific'); // 1000 "1e3"
$('#foo').data('hex'); // 1000 "0x03e8"
If you plan on using alternative numeric syntaxes to access numeric values, be sure to cast the value to a Number
first, such as with a unary +
operator.
+$('#foo').data('hex'); // 1000
i am also faced this problem when i am add same jar file with different versions, i simply remove old version jar an clean the project it works fine for me.
Also see the speeded-up package ujson:
import ujson
with open('data.json', 'wb') as fp:
ujson.dump(data, fp)
You can scale the image with pygame.transform.scale
:
import pygame
picture = pygame.image.load(filename)
picture = pygame.transform.scale(picture, (1280, 720))
You can then get the bounding rectangle of picture
with
rect = picture.get_rect()
and move the picture with
rect = rect.move((x, y))
screen.blit(picture, rect)
where screen
was set with something like
screen = pygame.display.set_mode((1600, 900))
To allow your widgets to adjust to various screen sizes, you could make the display resizable:
import os
import pygame
from pygame.locals import *
pygame.init()
screen = pygame.display.set_mode((500, 500), HWSURFACE | DOUBLEBUF | RESIZABLE)
pic = pygame.image.load("image.png")
screen.blit(pygame.transform.scale(pic, (500, 500)), (0, 0))
pygame.display.flip()
while True:
pygame.event.pump()
event = pygame.event.wait()
if event.type == QUIT:
pygame.display.quit()
elif event.type == VIDEORESIZE:
screen = pygame.display.set_mode(
event.dict['size'], HWSURFACE | DOUBLEBUF | RESIZABLE)
screen.blit(pygame.transform.scale(pic, event.dict['size']), (0, 0))
pygame.display.flip()
You can make an empty commit with git commit --allow-empty
, but that will not allow you to commit an empty folder structure as git does not know or care about folders as objects themselves -- just the files they contain.
Thank you first
Use overflow:auto
it works for me.
horizontal scroll bar disappears.
The accepted answer should be the following which was unmultimedio's comment to one of the answers above:
Cmd+K will work, you just need to set again in the Keyboard Shortcuts the workbench.action.terminal.clear to Cmd+K, so it shows as Source: User instead of Source: Default – unmultimedio Mar 12 '19 at 1:13
The only problem with JSON in Java is that if your XML has a single child, but is an array, it will convert it to an object instead of an array. This can cause problems if you dynamically always convert from XML to JSON, where if your example XML has only one element, you return an object, but if it has 2+, you return an array, which can cause parsing issues for people using the JSON.
Infoscoop's XML2JSON class has a way of tagging elements that are arrays before doing the conversion, so that arrays can be properly mapped, even if there is only one child in the XML.
Here is an example of using it (in a slightly different language, but you can also see how arrays is used from the nodelist2json() method of the XML2JSON link).
I'm guessing the question you really care about here is:
Is there a way to force Python to release all the memory that was used (if you know you won't be using that much memory again)?
No, there is not. But there is an easy workaround: child processes.
If you need 500MB of temporary storage for 5 minutes, but after that you need to run for another 2 hours and won't touch that much memory ever again, spawn a child process to do the memory-intensive work. When the child process goes away, the memory gets released.
This isn't completely trivial and free, but it's pretty easy and cheap, which is usually good enough for the trade to be worthwhile.
First, the easiest way to create a child process is with concurrent.futures
(or, for 3.1 and earlier, the futures
backport on PyPI):
with concurrent.futures.ProcessPoolExecutor(max_workers=1) as executor:
result = executor.submit(func, *args, **kwargs).result()
If you need a little more control, use the multiprocessing
module.
The costs are:
mmap
ped or otherwise; the shared-memory APIs in multiprocessing
; etc.).struct
-able or ideally ctypes
-able).We had a problem like this some weeks before. If you set a breakpoint and have a deep look into this.Controls
, the problem reveals it's nature: you have to recurse through all child controls.
The code could look like this:
private void CleanForm()
{
traverseControlsAndSetTextEmpty(this);
}
private void traverseControlsAndSetTextEmpty(Control control)
{
foreach(var c in control.Controls)
{
if (c is TextBox) ((TextBox)c).Text = String.Empty;
traverseControlsAndSetTextEmpty(c);
}
}
A sidenote to consider, you can store arrays in Postgres.
If you have the product's ID you can use that to create a product object:
$_product = wc_get_product( $product_id );
Then from the object you can run any of WooCommerce's product methods.
$_product->get_regular_price();
$_product->get_sale_price();
$_product->get_price();
Update
Please review the Codex article on how to write your own shortcode.
Integrating the WooCommerce product data might look something like this:
function so_30165014_price_shortcode_callback( $atts ) {
$atts = shortcode_atts( array(
'id' => null,
), $atts, 'bartag' );
$html = '';
if( intval( $atts['id'] ) > 0 && function_exists( 'wc_get_product' ) ){
$_product = wc_get_product( $atts['id'] );
$html = "price = " . $_product->get_price();
}
return $html;
}
add_shortcode( 'woocommerce_price', 'so_30165014_price_shortcode_callback' );
Your shortcode would then look like [woocommerce_price id="99"]
Adding on to @modiX answer, this is what works...DO NOT LEAVE THAT as empty
today.toLocaleDateString("default", {year: "numeric", month: "2-digit", day: "2-digit"})
edit (sorry I thought you wanted VBA).
Anytime you try to read a non-existent value from the registry, you get back a Null. Thus all you have to do is check for a Null value.
Use IsNull
not IsEmpty
.
Const HKEY_LOCAL_MACHINE = &H80000002
strComputer = "."
Set objRegistry = GetObject("winmgmts:\\" & _
strComputer & "\root\default:StdRegProv")
strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion"
strValueName = "Test Value"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
Wscript.Echo "The registry key exists."
End If
And here's a jQuery example:
HTML text field:
<input type="text" id="myTextfield" />
jQuery code to limit its size:
var elem = $("#myTextfield");
if(elem) elem.val(elem.val().substr(0,10));
As an example, you could use the jQuery code above to restrict the user from entering more than 10 characters while he's typing; the following code snippet does exactly this:
$(document).ready(function() {
var elem = $("#myTextfield");
if (elem) {
elem.keydown(function() {
if (elem.val().length > 10)
elem.val(elem.val().substr(0, 10));
});
}
});
Update: The above code snippet was only used to show an example usage.
The following code snippet will handle you issue with the DIV element:
$(document).ready(function() {
var elem = $(".tasks-overflow");
if(elem){
if (elem.text().length > 10)
elem.text(elem.text().substr(0,10))
}
});
Please note that I'm using text
instead of val
in this case, since the val
method doesn't seem to work with the DIV element.
To remove newlines, use tr:
tr -d '\n'
If you want to replace each newline with a single space:
tr '\n' ' '
The error ba: Event not found
is coming from csh, and is due to csh trying to match !ba
in your history list. You can escape the !
and write the command:
sed ':a;N;$\!ba;s/\n/ /g' # Suitable for csh only!!
but sed is the wrong tool for this, and you would be better off using a shell that handles quoted strings more reasonably. That is, stop using csh and start using bash.
Trying to get this on a mobile device requires a few more steps. screen.availWidth
stays the same regardless of the orientation of the device.
Here is my solution for mobile:
function getOrientation(){
return Math.abs(window.orientation) - 90 == 0 ? "landscape" : "portrait";
};
function getMobileWidth(){
return getOrientation() == "landscape" ? screen.availHeight : screen.availWidth;
};
function getMobileHeight(){
return getOrientation() == "landscape" ? screen.availWidth : screen.availHeight;
};
The absolute path to the directory where
./manage.py collectstatic
will collect static files for deployment. Example:STATIC_ROOT="/var/www/example.com/static/"
now the command ./manage.py collectstatic
will copy all the static files(ie in static folder in your apps, static files in all paths) to the directory /var/www/example.com/static/
. now you only need to serve this directory on apache or nginx..etc.
The
URL
of which the static files inSTATIC_ROOT
directory are served(by Apache or nginx..etc). Example:/static/
orhttp://static.example.com/
If you set STATIC_URL = 'http://static.example.com/'
, then you must serve the STATIC_ROOT
folder (ie "/var/www/example.com/static/"
) by apache or nginx at url 'http://static.example.com/'
(so that you can refer the static file '/var/www/example.com/static/jquery.js'
with 'http://static.example.com/jquery.js'
)
Now in your django-templates, you can refer it by:
{% load static %}
<script src="{% static "jquery.js" %}"></script>
which will render:
<script src="http://static.example.com/jquery.js"></script>
Since you want the trailing string from the input, you can use %n
(number of characters consumed thus far) to get the position at which the trailing string starts. This avoids memory copies and buffer sizing issues, but comes at the cost that you may need to do them explicitly if you wanted a copy.
const char *input = "19 cool kid";
int age;
int nameStart = 0;
sscanf(input, "%d %n", &age, &nameStart);
printf("%s is %d years old\n", input + nameStart, age);
outputs:
cool kid is 19 years old
The correct way to create a user in Django is to use the create_user function. This will handle the hashing of the password, etc..
from django.contrib.auth.models import User
user = User.objects.create_user(username='john',
email='[email protected]',
password='glass onion')
I know this is a very old question but I want to add an answer I have come up with.
First you need a handler for your normal TextChanged
event handler for the TextBox
:
private bool InProg;
internal void TBTextChanged(object sender, TextChangedEventArgs e)
{
var change = e.Changes.FirstOrDefault();
if ( !InProg )
{
InProg = true;
var culture = new CultureInfo(CultureInfo.CurrentCulture.Name);
var source = ( (TextBox)sender );
if ( ( ( change.AddedLength - change.RemovedLength ) > 0 || source.Text.Length > 0 ) && !DelKeyPressed )
{
if ( Files.Where(x => x.IndexOf(source.Text, StringComparison.CurrentCultureIgnoreCase) == 0 ).Count() > 0 )
{
var _appendtxt = Files.FirstOrDefault(ap => ( culture.CompareInfo.IndexOf(ap, source.Text, CompareOptions.IgnoreCase) == 0 ));
_appendtxt = _appendtxt.Remove(0, change.Offset + 1);
source.Text += _appendtxt;
source.SelectionStart = change.Offset + 1;
source.SelectionLength = source.Text.Length;
}
}
InProg = false;
}
}
Then make a simple PreviewKeyDown
handler:
private static bool DelKeyPressed;
internal static void DelPressed(object sender, KeyEventArgs e)
{ if ( e.Key == Key.Back ) { DelKeyPressed = true; } else { DelKeyPressed = false; } }
In this example "Files" is a list of directory names created on application startup.
Then just attach the handlers:
public class YourClass
{
public YourClass()
{
YourTextbox.PreviewKeyDown += DelPressed;
YourTextbox.TextChanged += TBTextChanged;
}
}
With this whatever you choose to put in the List
will be used for the autocomplete box. This may not be a great option if you expect to have an enormous list for the autocomplete but in my app it only ever sees 20-50 items so it cycles through very quick.
You could create many tasks like:
List<Task> TaskList = new List<Task>();
foreach(...)
{
var LastTask = new Task(SomeFunction);
LastTask.Start();
TaskList.Add(LastTask);
}
Task.WaitAll(TaskList.ToArray());
To grep for carriage return, namely the \r
character, or 0x0d
, we can do this:
grep -F $'\r' application.log
Alternatively, use printf
, or echo
, for POSIX compatibility
grep -F "$(printf '\r')" application.log
And we can use hexdump
, or less
to see the result:
$ printf "a\rb" | grep -F $'\r' | hexdump -c
0000000 a \r b \n
Regarding the use of $'\r'
and other supported characters, see Bash Manual > ANSI-C Quoting:
Words of the form $'string' are treated specially. The word expands to string, with backslash-escaped characters replaced as specified by the ANSI C standard
On our build server, we explicitly delete the bin and obj directories, via nant scripts.
Each project build script is responsible for it's output/temp directories. Works nicely that way. So when we change a project and add a new one, we base the script off a working script, and you notice the delete stage and take care of it.
If you doing it on you logic development machine, I'd stick to clean via Visual Studio as others have mentioned.
In my case, I ran into this error this way. pom.xml
of my project defined two dependencies A
and B
. And both A
and B
defined dependency on same artifact (call it C
) but different versions of it (C.1
and C.2
). When this happens, for each class in C
maven can only select one version of the class from the two versions (while building an uber-jar). It will select the "nearest" version based on its dependency mediation rules and will output a warning "We have a duplicate class..." If a method/class signature changes between the versions, it can cause a java.lang.IncompatibleClassChangeError
exception if the incorrect version is used at runtime.
Advanced: If A
must use v1 of C
and B
must use v2 of C
, then we must relocate C
in A
and B
's poms to avoid class conflict (we have a duplicate class warning) when building the final project that depends on both A
and B
.
I'd suggest using intermediary third table for storing tags<=>items associations, since we have many-to-many relations between tags and items, i.e. one item can be associated with multiple tags and one tag can be associated with multiple items. HTH, Valve.
Here is the alternative solution to check whether a particular string contains some predefined string. It uses IndexOf
Function:
'this is your string
Dim strMyString As String = "aaSomethingbb"
'if your string contains these strings
Dim TargetString1 As String = "Something"
Dim TargetString2 As String = "Something2"
If strMyString.IndexOf(TargetString1) <> -1 Or strMyString.IndexOf(TargetString2) <> -1 Then
End If
NOTE: This solution has been tested with Visual Studio 2010.
You can use the Copy method in the System.IO.File class.
I would suggest using the directives like the following:
static void Main(string[] args)
{
#if DEBUG
args = new[] { "A" };
#endif
Console.WriteLine(args[0]);
}
Good luck!
Here is a solution under 19API lvl:
First of all. Make a Gson obj. --> Gson gson = new Gson();
Second step is get your jsonObj as String with StringRequest(instead of JsonObjectRequest)
YoursObjArray[] yoursObjArray = gson.fromJson(response, YoursObjArray[].class);
There are a couple of ways.
>>> x = np.random.random((3, 2)) - 0.5
>>> x
array([[-0.00590765, 0.18932873],
[-0.32396051, 0.25586596],
[ 0.22358098, 0.02217555]])
>>> np.maximum(x, 0)
array([[ 0. , 0.18932873],
[ 0. , 0.25586596],
[ 0.22358098, 0.02217555]])
>>> x * (x > 0)
array([[-0. , 0.18932873],
[-0. , 0.25586596],
[ 0.22358098, 0.02217555]])
>>> (abs(x) + x) / 2
array([[ 0. , 0.18932873],
[ 0. , 0.25586596],
[ 0.22358098, 0.02217555]])
If timing the results with the following code:
import numpy as np
x = np.random.random((5000, 5000)) - 0.5
print("max method:")
%timeit -n10 np.maximum(x, 0)
print("multiplication method:")
%timeit -n10 x * (x > 0)
print("abs method:")
%timeit -n10 (abs(x) + x) / 2
We get:
max method:
10 loops, best of 3: 239 ms per loop
multiplication method:
10 loops, best of 3: 145 ms per loop
abs method:
10 loops, best of 3: 288 ms per loop
So the multiplication seems to be the fastest.
You could use the existing methods from the Character class. Take a look at the docs:
http://download.java.net/jdk7/archive/b123/docs/api/java/lang/Character.html#isDigit(char)
So, you could do something like this...
String character = in.next();
char c = character.charAt(0);
...
if (Character.isDigit(c)) {
...
} else if (Character.isLetter(c)) {
...
}
...
If you ever want to know exactly how this is implemented, you could always look at the Java source code.
cp -r ./SourceFolder ./DestFolder
You were just adding the html string. Not the element you created with a click event listener.
Try This:
<html>
<head>
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.2.6/jquery.min.js"></script>
</head>
<body>
<table id="addNodeTable">
<tr>
<td>
Row 1
</td>
</tr>
<tr >
<td>
Row 2
</td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
$(document).ready(function() {
var test = $('<button>Test</button>').click(function () {
alert('hi');
});
$("#addNodeTable tr:last").append('<tr><td></td></tr>').find("td:last").append(test);
});
</script>
use labelpad parameter:
pl.xlabel("...", labelpad=20)
or set it after:
ax.xaxis.labelpad = 20
You should use any()
In [98]: a['Names'].str.contains('Mel').any()
Out[98]: True
In [99]: if a['Names'].str.contains('Mel').any():
....: print "Mel is there"
....:
Mel is there
a['Names'].str.contains('Mel')
gives you a series of bool values
In [100]: a['Names'].str.contains('Mel')
Out[100]:
0 False
1 False
2 False
3 False
4 True
Name: Names, dtype: bool
How about std::remove()
instead:
#include <algorithm>
...
vec.erase(std::remove(vec.begin(), vec.end(), 8), vec.end());
This combination is also known as the erase-remove idiom.
I am assuming you want to display this as part of the player.
This site breaks down how to get both the current and total time regardless of how you want to display it though using jQuery:
http://dev.opera.com/articles/view/custom-html5-video-player-with-css3-and-jquery/
This will also cover how to set it to a specific div. As philip has already mentioned, .currentTime will give you where you are in the video.
You can use type()
or isinstance()
.
>>> type([]) is list
True
Be warned that you can clobber list
or any other type by assigning a variable in the current scope of the same name.
>>> the_d = {}
>>> t = lambda x: "aight" if type(x) is dict else "NOPE"
>>> t(the_d) 'aight'
>>> dict = "dude."
>>> t(the_d) 'NOPE'
Above we see that dict
gets reassigned to a string, therefore the test:
type({}) is dict
...fails.
To get around this and use type()
more cautiously:
>>> import __builtin__
>>> the_d = {}
>>> type({}) is dict
True
>>> dict =""
>>> type({}) is dict
False
>>> type({}) is __builtin__.dict
True
Use orderBy:
df.orderBy('column_name', ascending=False)
Complete answer:
group_by_dataframe.count().filter("`count` >= 10").orderBy('count', ascending=False)
http://spark.apache.org/docs/2.0.0/api/python/pyspark.sql.html
Bootstrap event for modal load was changed in Bootstrap 3
just use shown.bs.modal
event:
$('.modal').on('shown.bs.modal', function() {
$(this).find('iframe').attr('src','http://www.google.com')
})
More can found on the event at the below link:
You must call your Bootstrap jQuery plugin so that it will trigger.
The general format, from the @link section of the javadoc documentation, is:
Method in the same class:
/** See also {@link #myMethod(String)}. */
void foo() { ... }
Method in a different class, either in the same package or imported:
/** See also {@link MyOtherClass#myMethod(String)}. */
void foo() { ... }
Method in a different package and not imported:
/** See also {@link com.mypackage.YetAnotherClass#myMethod(String)}. */
void foo() { ... }
Label linked to method, in plain text rather than code font:
/** See also this {@linkplain #myMethod(String) implementation}. */
void foo() { ... }
A chain of method calls, as in your question. We have to specify labels for the links to methods outside this class, or we get getFoo().Foo.getBar().Bar.getBaz()
. But these labels can be fragile during refactoring -- see "Labels" below.
/**
* A convenience method, equivalent to
* {@link #getFoo()}.{@link Foo#getBar() getBar()}.{@link Bar#getBaz() getBaz()}.
* @return baz
*/
public Baz fooBarBaz()
Automated refactoring may not affect labels. This includes renaming the method, class or package; and changing the method signature.
Therefore, provide a label only if you want different text than the default.
For example, you might link from human language to code:
/** You can also {@linkplain #getFoo() get the current foo}. */
void setFoo( Foo foo ) { ... }
Or you might link from a code sample with text different than the default, as shown above under "A chain of method calls." However, this can be fragile while APIs are evolving.
If the method signature includes parameterized types, use the erasure of those types in the javadoc @link. For example:
int bar( Collection<Integer> receiver ) { ... }
/** See also {@link #bar(Collection)}. */
void foo() { ... }
Try this:
import * as moment from 'moment';
ngOnInit() {
this.date = moment().format("YYYY Do MMM");
}
You have to select the device in the schemes menu in the top left where you used to select between simulator/device. It won’t let you archive a build for the simulator.
Or you may find that if the iOS device is already selected the archive box isn’t selected when you choose “Edit Schemes” => “Build”.
An alternative in Python 2.6 or above is to use collections.namedtuple()
-- it saves you writing any special methods:
from collections import namedtuple
MyThingBase = namedtuple("MyThingBase", ["name", "location"])
class MyThing(MyThingBase):
def __new__(cls, name, location, length):
obj = MyThingBase.__new__(cls, name, location)
obj.length = length
return obj
a = MyThing("a", "here", 10)
b = MyThing("a", "here", 20)
c = MyThing("c", "there", 10)
a == b
# True
hash(a) == hash(b)
# True
a == c
# False
Description:
there are 3 steps to run PHP code inside post or page.
In functions.php
file (in your theme) add new function
In functions.php
file (in your theme) register new shortcode which call your function:
add_shortcode( 'SHORCODE_NAME', 'FUNCTION_NAME' );
Example #1: just display text.
In functions:
function simple_function_1() {
return "Hello World!";
}
add_shortcode( 'own_shortcode1', 'simple_function_1' );
In post/page:
[own_shortcode1]
Effect:
Hello World!
Example #2: use for loop.
In functions:
function simple_function_2() {
$output = "";
for ($number = 1; $number < 10; $number++) {
// Append numbers to the string
$output .= "$number<br>";
}
return "$output";
}
add_shortcode( 'own_shortcode2', 'simple_function_2' );
In post/page:
[own_shortcode2]
Effect:
1
2
3
4
5
6
7
8
9
Example #3: use shortcode with arguments
In functions:
function simple_function_3($name) {
return "Hello $name";
}
add_shortcode( 'own_shortcode3', 'simple_function_3' );
In post/page:
[own_shortcode3 name="John"]
Effect:
Hello John
Example #3 - without passing arguments
In post/page:
[own_shortcode3]
Effect:
Hello
PHP PMD (Programming Mistake Detector) and PHP CPD (Copy/Paste Detector) as the former part of PHPUnit.
I'm pretty sure you can't simply add on delete cascade
to an existing foreign key constraint. You have to drop the constraint first, then add the correct version. In standard SQL, I believe the easiest way to do this is to
on delete cascade
, and finallyRepeat for each foreign key you want to change.
But PostgreSQL has a non-standard extension that lets you use multiple constraint clauses in a single SQL statement. For example
alter table public.scores
drop constraint scores_gid_fkey,
add constraint scores_gid_fkey
foreign key (gid)
references games(gid)
on delete cascade;
If you don't know the name of the foreign key constraint you want to drop, you can either look it up in pgAdminIII (just click the table name and look at the DDL, or expand the hierarchy until you see "Constraints"), or you can query the information schema.
select *
from information_schema.key_column_usage
where position_in_unique_constraint is not null
This is a version when you have an object and an array and you want to merge them and give the array a key value so it fits into the object nicely.
var fileData = [_x000D_
{ "id" : "1", "filename" : "myfile1", "score" : 33.1 }, _x000D_
{ "id" : "2", "filename" : "myfile2", "score" : 31.4 }, _x000D_
{ "id" : "3", "filename" : "myfile3", "score" : 36.3 }, _x000D_
{ "id" : "4", "filename" : "myfile4", "score" : 23.9 }_x000D_
];_x000D_
_x000D_
var fileQuality = [0.23456543,0.13413131,0.1941344,0.7854522];_x000D_
_x000D_
var newOjbect = fileData.map((item, i) => Object.assign({}, item, {fileQuality:fileQuality[i]}));_x000D_
_x000D_
console.log(newOjbect);
_x000D_
You can use this google service free IP geolocation webservice
update
the link is broken, I put here other link that include @NickSweeting in the comments:
and you can get the data in json format:
Render function should be pure, it's mean that it only uses state and props to render, never try to modify the state in render, this usually causes ugly bugs and decreases performance significantly. It's also a good point if you separate data-fetching and render concerns in your React App. I recommend you read this article which explains this idea very well. https://medium.com/@learnreact/container-components-c0e67432e005#.sfydn87nm
If you want to import a specific function or class from a module, you can do this:
import importlib
import sys
importlib.reload(sys.modules['my_module'])
from my_module import my_function
I had a similar issue with Angular and IIS throwing a 404 status code on manual refresh and tried the most voted solution but that did not work for me. Also tried a bunch of other solutions having to deal with WebDAV and changing handlers and none worked.
Luckily I found this solution and it worked (took out parts I didn't need). So if none of the above works for you or even before trying them, try this and see if that fixes your angular deployment on iis issue.
Add the snippet to your webconfig in the root directory of your site. From my understanding, it removes the 404 status code from any inheritance (applicationhost.config, machine.config), then creates a 404 status code at the site level and redirects back to the home page as a custom 404 page.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.webServer>
<httpErrors errorMode="Custom">
<remove statusCode="404"/>
<error statusCode="404" path="/index.html" responseMode="ExecuteURL"/>
</httpErrors>
</system.webServer>
</configuration>
Write "var" before variables, when you define them. IE8 dies when there is no "var".
If INSERTS
are rare, I would avoid doing a NOT EXISTS (...)
since it emits a SELECT
on all updates. Instead, take a look at wildpeaks answer: https://dba.stackexchange.com/questions/5815/how-can-i-insert-if-key-not-exist-with-postgresql
CREATE OR REPLACE FUNCTION upsert_tableName(arg1 type, arg2 type) RETURNS VOID AS $$
DECLARE
BEGIN
UPDATE tableName SET col1 = value WHERE colX = arg1 and colY = arg2;
IF NOT FOUND THEN
INSERT INTO tableName values (value, arg1, arg2);
END IF;
END;
$$ LANGUAGE 'plpgsql';
This way Postgres will initially try to do a UPDATE
. If no rows was affected, it will fall back to emitting an INSERT
.
You may be able to use an approximate string matching library to do this, e.g. SecondString, but that is almost certainly overkill - just use one of the for-loop answers provided instead.
You have a pointer to a char
. So as your system knows, on that memory address there is a char
value on sizeof(char)
space. When you cast it up to int*
, you will work with data of sizeof(int)
, so you will print your char and some memory-garbage after it as an integer.