The problem, as the Traceback says, comes from the line x[i+1] = x[i] + ( t[i+1] - t[i] ) * f( x[i], t[i] ). Let's replace it in its context:

• x is an array equal to [x0 * n], so its length is 1
• you're iterating from 0 to n-2 (n doesn't matter here), and i is the index. In the beginning, everything is ok (here there's no beginning apparently... :( ), but as soon as i + 1 >= len(x) <=> i >= 0, the element x[i+1] doesn't exist. Here, this element doesn't exist since the beginning of the for loop.

To solve this, you must replace x[i+1] = x[i] + ( t[i+1] - t[i] ) * f( x[i], t[i] ) by x.append(x[i] + ( t[i+1] - t[i] ) * f( x[i], t[i] )).

A .tex file should be a LaTeX source file.

If this is the case, that file contains the source code for a LaTeX document. You can open it with any text editor (notepad, notepad++ should work) and you can view the source code. But if you want to view the final formatted document, you need to install a LaTeX distribution and compile the .tex file.

Of course, any program can write any file with any extension, so if this is not a LaTeX document, then we can't know what software you need to install to open it. Maybe if you upload the file somewhere and link it in your question we can see the file and provide more help to you.

Yes, this is the source code of a LaTeX document. If you were able to paste it here, then you are already viewing it. If you want to view the compiled document, you need to install a LaTeX distribution. You can try to install MiKTeX then you can use that to compile the document to a .pdf file.

You can also check out this question and answer for how to do it: How to compile a LaTeX document?

Also, there's an online LaTeX editor and you can paste your code in there to preview the document: https://www.overleaf.com/.

I use the below mentioned process to convert equations to markdown. This works very well for me. Its very simple!!

Let's say, I want to represent matrix multiplication equation

Step 1:

Get the script for your formulae from here - https://csrgxtu.github.io/2015/03/20/Writing-Mathematic-Fomulars-in-Markdown/

My example: I wanted to represent Z(i,j)=X(i,k) * Y(k, j); k=1 to n into a summation formulae.



Referencing the website, the script needed was => Z_i_j=\sum_{k=1}^{10} X_i_k * Y_k_j

Step 2:

Use URL encoder - https://www.urlencoder.org/ to convert the script to a valid url

My example:

Step 3:

Use this website to generate the image by copy-pasting the output from Step 2 in the "eq" request parameter - http://www.sciweavers.org/tex2img.php?eq=<b><i>paste-output-here</i></b>&bc=White&fc=Black&im=jpg&fs=12&ff=arev&edit=

- My example:
http://www.sciweavers.org/tex2img.php?eq=Z_i_j=\sum_{k=1}^{10}%20X_i_k%20*%20Y_k_j&bc=White&fc=Black&im=jpg&fs=12&ff=arev&edit=

Step 4:

Reference image using markdown syntax - ![alt text](enter url here)

- Copy this in your markdown and you are good to go:

![Z(i,j)=X(i,k) * Y(k, j); k=1 to n](http://www.sciweavers.org/tex2img.php?eq=Z_i_j%3D%5Csum_%7Bi%3D1%7D%5E%7B10%7D%20X_i_k%20%2A%20Y_k_j&bc=White&fc=Black&im=jpg&fs=12&ff=arev&edit=)

Image below is the output of markdown. Hurray!!

Follow these simple steps :

1: In the Rmarkdown script run Knit(Ctrl+Shift+K) 2: Then after the html markdown is opened click Open in Browser(top left side) and the html is opened in your web browser 3: Then use Ctrl+P and save as PDF .

There are two ways to approach this problem: numerically and symbolically.

To solve it numerically, you have to first encode it as a "runnable" function - stick a value in, get a value out. For example,

def my_function(x):
    return 2*x + 6

It is quite possible to parse a string to automatically create such a function; say you parse 2x + 6 into a list, [6, 2] (where the list index corresponds to the power of x - so 6*x^0 + 2*x^1). Then:

def makePoly(arr):
    def fn(x):
        return sum(c*x**p for p,c in enumerate(arr))
    return fn

my_func = makePoly([6, 2])
my_func(3)    # returns 12

You then need another function which repeatedly plugs an x-value into your function, looks at the difference between the result and what it wants to find, and tweaks its x-value to (hopefully) minimize the difference.

def dx(fn, x, delta=0.001):
    return (fn(x+delta) - fn(x))/delta

def solve(fn, value, x=0.5, maxtries=1000, maxerr=0.00001):
    for tries in xrange(maxtries):
        err = fn(x) - value
        if abs(err) < maxerr:
            return x
        slope = dx(fn, x)
        x -= err/slope
    raise ValueError('no solution found')

There are lots of potential problems here - finding a good starting x-value, assuming that the function actually has a solution (ie there are no real-valued answers to x^2 + 2 = 0), hitting the limits of computational accuracy, etc. But in this case, the error minimization function is suitable and we get a good result:

solve(my_func, 16)    # returns (x =) 5.000000000000496

Note that this solution is not absolutely, exactly correct. If you need it to be perfect, or if you want to try solving families of equations analytically, you have to turn to a more complicated beast: a symbolic solver.

A symbolic solver, like Mathematica or Maple, is an expert system with a lot of built-in rules ("knowledge") about algebra, calculus, etc; it "knows" that the derivative of sin is cos, that the derivative of kx^p is kpx^(p-1), and so on. When you give it an equation, it tries to find a path, a set of rule-applications, from where it is (the equation) to where you want to be (the simplest possible form of the equation, which is hopefully the solution).

Your example equation is quite simple; a symbolic solution might look like:

=> LHS([6, 2]) RHS([16])

# rule: pull all coefficients into LHS
LHS, RHS = [lh-rh for lh,rh in izip_longest(LHS, RHS, 0)], [0]

=> LHS([-10,2]) RHS([0])

# rule: solve first-degree poly
if RHS==[0] and len(LHS)==2:
    LHS, RHS = [0,1], [-LHS[0]/LHS[1]]

=> LHS([0,1]) RHS([5])

and there is your solution: x = 5.

I hope this gives the flavor of the idea; the details of implementation (finding a good, complete set of rules and deciding when each rule should be applied) can easily consume many man-years of effort.

for numerical solution, you can use fsolve:

http://docs.scipy.org/doc/scipy/reference/generated/scipy.optimize.fsolve.html#scipy.optimize.fsolve

from scipy.optimize import fsolve
import math

def equations(p):
    x, y = p
    return (x+y**2-4, math.exp(x) + x*y - 3)

x, y =  fsolve(equations, (1, 1))

print equations((x, y))

If every input asks the same question, you should use a for loop and an array of inputs:

Scanner dd = new Scanner(System.in);
int[] vars = new int[3];

for(int i = 0; i < vars.length; i++) {
  System.out.println("Enter next var: ");
  vars[i] = dd.nextInt();
}

Or as Chip suggested, you can parse the input from one line:

Scanner in = new Scanner(System.in);
int[] vars = new int[3];

System.out.println("Enter "+vars.length+" vars: ");
for(int i = 0; i < vars.length; i++)
  vars[i] = in.nextInt();

You were on the right track, and what you did works. This is just a nicer and more flexible way of doing things.

From http://www.cplusplus.com/reference/string/stoi/

// stoi example
#include <iostream>   // std::cout
#include <string>     // std::string, std::stoi

int main ()
{
  std::string str_dec = "2001, A Space Odyssey";
  std::string str_hex = "40c3";
  std::string str_bin = "-10010110001";
  std::string str_auto = "0x7f";

  std::string::size_type sz;   // alias of size_t

  int i_dec = std::stoi (str_dec,&sz);
  int i_hex = std::stoi (str_hex,nullptr,16);
  int i_bin = std::stoi (str_bin,nullptr,2);
  int i_auto = std::stoi (str_auto,nullptr,0);

  std::cout << str_dec << ": " << i_dec << " and [" << str_dec.substr(sz) << "]\n";
  std::cout << str_hex << ": " << i_hex << '\n';
  std::cout << str_bin << ": " << i_bin << '\n';
  std::cout << str_auto << ": " << i_auto << '\n';

  return 0;
}

Output:

2001, A Space Odyssey: 2001 and [, A Space Odyssey]

40c3: 16579

-10010110001: -1201

0x7f: 127

If it is inline equation, then use \allowbreak. Use it like:

$x_1,x_2,x_3,\allowbreak x_4,x_5$.

Latex will break equation in this place only if necessary.

Try to use the fleqn document class option.

\documentclass[fleqn]{article}

(See also http://en.wikibooks.org/wiki/LaTeX/Basics for a list of other options.)

How about something like:

\documentclass{article}

\usepackage{amssymb,amsmath}

\begin{document}

\begin{equation}\label{A_Label}
  \begin{split}
    w^T x_i + b \geqslant 1-\xi_i \text{ if } y_i &= 1, \\
    w^T x_i + b \leqslant -1+\xi_i \text{ if } y_i &= -1
  \end{split}
\end{equation}

\end{document}

which produces:

You have two easy ways to do this. Jay has covered the accurate way of checking from the center of the ball.

The easier way is to use a rectangle bounding box, set the size of your box to be 80% the size of the ball, and you'll simulate collision pretty well.

Add a method to your ball class:

public Rectangle getBoundingRect()
{
   int ballHeight = (int)Ball.Height * 0.80f;
   int ballWidth = (int)Ball.Width * 0.80f;
   int x = Ball.X - ballWidth / 2;
   int y = Ball.Y - ballHeight / 2;

   return new Rectangle(x,y,ballHeight,ballWidth);
}

Then, in your loop:

// Checks every ball against every other ball. 
// For best results, split it into quadrants like Ryan suggested. 
// I didn't do that for simplicity here.
for (int i = 0; i < balls.count; i++)
{
    Rectangle r1 = balls[i].getBoundingRect();

    for (int k = 0; k < balls.count; k++)
    {

        if (balls[i] != balls[k])
        {
            Rectangle r2 = balls[k].getBoundingRect();

            if (r1.Intersects(r2))
            {
                 // balls[i] collided with balls[k]
            }
        }
    }
}

You're passing a type as an argument, not an object. You need to do characterSelection(screen, test); where test is of type SelectionneNonSelectionne.

The problem comes because of an interesting clash of new C++ features and what you're trying to do. First, let's take a look at the push_back signature:

void push_back(const T&)

It's expecting a reference to an object of type T. Under the old system of initialization, such a member exists. For example, the following code compiles just fine:

#include <vector>

class Foo {
public:
    static const int MEMBER;
};

const int Foo::MEMBER = 1; 

int main(){
    std::vector<int> v;
    v.push_back( Foo::MEMBER );       // undefined reference to `Foo::MEMBER'
    v.push_back( (int) Foo::MEMBER ); // OK  
    return 0;
}

This is because there is an actual object somewhere that has that value stored in it. If, however, you switch to the new method of specifying static const members, like you have above, Foo::MEMBER is no longer an object. It is a constant, somewhat akin to:

#define MEMBER 1

But without the headaches of a preprocessor macro (and with type safety). That means that the vector, which is expecting a reference, can't get one.

In the GSM specification 3GPP TS 11.11, there are 10 bytes set aside in the MSISDN EF (6F40) for 'dialing number'. Since this is the GSM representation of a phone number, and it's usage is nibble swapped, (and there is always the possibility of parentheses) 22 characters of data should be plenty.

In my experience, there is only one instance of open/close parentheses, that is my reasoning for the above.

You could add [asc] or [desc] at the end of the order by to get the earliest or latest records

For example, this will give you the latest records first

ORDER BY stamp DESC

Append the LIMIT clause after ORDER BY

Yes it is, and you can also use it like this

<button>Click here to<br/> start playing</button>

if you want to make the break yourself.

Actually it happens when the number of processes exceeds the limits set by the hosting provider.

To avoid either we need to enhance the capacity by hosting providers or we need to check in the code whether any process takes longer time (like background tasks).

Note: the answer below was written a long time prior to C# 6, which is planning to introduce the ability to declare parameterless constructors in structs - but they still won't be called in all situations (e.g. for array creation) (in the end this feature was not added to C# 6).

EDIT: I've edited the answer below due to Grauenwolf's insight into the CLR.

The CLR allows value types to have parameterless constructors, but C# doesn't. I believe this is because it would introduce an expectation that the constructor would be called when it wouldn't. For instance, consider this:

MyStruct[] foo = new MyStruct[1000];

The CLR is able to do this very efficiently just by allocating the appropriate memory and zeroing it all out. If it had to run the MyStruct constructor 1000 times, that would be a lot less efficient. (In fact, it doesn't - if you do have a parameterless constructor, it doesn't get run when you create an array, or when you have an uninitialized instance variable.)

The basic rule in C# is "the default value for any type can't rely on any initialization". Now they could have allowed parameterless constructors to be defined, but then not required that constructor to be executed in all cases - but that would have led to more confusion. (Or at least, so I believe the argument goes.)

EDIT: To use your example, what would you want to happen when someone did:

Rational[] fractions = new Rational[1000];

Should it run through your constructor 1000 times?

• If not, we end up with 1000 invalid rationals
• If it does, then we've potentially wasted a load of work if we're about to fill in the array with real values.

EDIT: (Answering a bit more of the question) The parameterless constructor isn't created by the compiler. Value types don't have to have constructors as far as the CLR is concerned - although it turns out it can if you write it in IL. When you write "new Guid()" in C# that emits different IL to what you get if you call a normal constructor. See this SO question for a bit more on that aspect.

I suspect that there aren't any value types in the framework with parameterless constructors. No doubt NDepend could tell me if I asked it nicely enough... The fact that C# prohibits it is a big enough hint for me to think it's probably a bad idea.

create a class called DbManager:

Class DbManager
{
 SqlConnection connection;
 SqlCommand command;

       public DbManager()
      {
        connection = new SqlConnection();
        connection.ConnectionString = @"Data Source=.     \SQLEXPRESS;AttachDbFilename=|DataDirectory|DatabaseName.mdf;Integrated Security=True;User Instance=True";
        command = new SqlCommand();
        command.Connection = connection;
        command.CommandType = CommandType.Text;
     } // constructor

 public bool GetUsersData(ref string lastname, ref string firstname, ref string age)
     {
        bool returnvalue = false;
        try
        {
            command.CommandText = "select * from TableName where firstname=@firstname and lastname=@lastname";
            command.Parameters.Add("firstname",SqlDbType.VarChar).Value = firstname;
 command.Parameters.Add("lastname",SqlDbType.VarChar).Value = lastname; 
            connection.Open();
            SqlDataReader reader= command.ExecuteReader();
            if (reader.HasRows)
            {
                while (reader.Read())
                {

                    lastname = reader.GetString(1);
                    firstname = reader.GetString(2);

                    age = reader.GetString(3);


                }
            }
            returnvalue = true;
        }
        catch
        { }
        finally
        {
            connection.Close();
        }
        return returnvalue;

    }

then double click the retrieve button(e.g btnretrieve) on your form and insert the following code:

 private void btnretrieve_Click(object sender, EventArgs e)
    {
        try
        {
            string lastname = null;
            string firstname = null;
            string age = null;

            DbManager db = new DbManager();

            bool status = db.GetUsersData(ref surname, ref firstname, ref age);
                if (status)
                {
                txtlastname.Text = surname;
                txtfirstname.Text = firstname;
                txtAge.Text = age;       
               }
          }
       catch
          {

          }
   }

How do I declare an ES6 Map type in typescript?

You need to target --module es6. This is misfortunate and you can raise your concern here : https://github.com/Microsoft/TypeScript/issues/2953#issuecomment-98514111

You can use String.split with a limit of 2.

    String s = "Hello World, I'm the rest.";
    String[] result = s.split(" ", 2);
    String first = result[0];
    String rest = result[1];
    System.out.println("First: " + first);
    System.out.println("Rest: " + rest);

    // prints =>
    // First: Hello
    // Rest: World, I'm the rest.

• API docs for: split

This is the strict aliasing rule, found in section 3.10 of the C++03 standard (other answers provide good explanation, but none provided the rule itself):

If a program attempts to access the stored value of an object through an lvalue of other than one of the following types the behavior is undefined:

• the dynamic type of the object,
• a cv-qualified version of the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to a cv-qualified version of the dynamic type of the object,
• an aggregate or union type that includes one of the aforementioned types among its members (including, recursively, a member of a subaggregate or contained union),
• a type that is a (possibly cv-qualified) base class type of the dynamic type of the object,
• a char or unsigned char type.

C++11 and C++14 wording (changes emphasized):

If a program attempts to access the stored value of an object through a glvalue of other than one of the following types the behavior is undefined:

• the dynamic type of the object,
• a cv-qualified version of the dynamic type of the object,
• a type similar (as defined in 4.4) to the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to the dynamic type of the object,
• a type that is the signed or unsigned type corresponding to a cv-qualified version of the dynamic type of the object,
• an aggregate or union type that includes one of the aforementioned types among its elements or non-static data members (including, recursively, an element or non-static data member of a subaggregate or contained union),
• a type that is a (possibly cv-qualified) base class type of the dynamic type of the object,
• a char or unsigned char type.

Two changes were small: glvalue instead of lvalue, and clarification of the aggregate/union case.

The third change makes a stronger guarantee (relaxes the strong aliasing rule): The new concept of similar types that are now safe to alias.

Also the C wording (C99; ISO/IEC 9899:1999 6.5/7; the exact same wording is used in ISO/IEC 9899:2011 §6.5 ¶7):

An object shall have its stored value accessed only by an lvalue expression that has one of the following types ^{73) or 88)}:

• a type compatible with the effective type of the object,
• a quali?ed version of a type compatible with the effective type of the object,
• a type that is the signed or unsigned type corresponding to the effective type of the object,
• a type that is the signed or unsigned type corresponding to a quali?ed version of the effective type of the object,
• an aggregate or union type that includes one of the aforementioned types among its members (including, recursively, a member of a subaggregate or contained union), or
• a character type.

^{73) or 88)} The intent of this list is to specify those circumstances in which an object may or may not be aliased.

Technically, you can use StackTrace, but this is very slow and will not give you the answers you expect a lot of the time. This is because during release builds optimizations can occur that will remove certain method calls. Hence you can't be sure in release whether stacktrace is "correct" or not.

Really, there isn't any foolproof or fast way of doing this in C#. You should really be asking yourself why you need this and how you can architect your application, so you can do what you want without knowing which method called it.

The setDate() method sets the date and updates the associated control. Here is how:

$("#datepicker1").datepicker({
    dateFormat: "yy-mm-dd"
}).datepicker("setDate", "0");

Demo

As mentioned in documentation, setDate() happily accepts the JavaScript Date object, number or a string:

The new date may be a Date object or a string in the current date format (e.g. '01/26/2009'), a number of days from today (e.g. +7) or a string of values and periods ('y' for years, 'm' for months, 'w' for weeks, 'd' for days, e.g. '+1m +7d'), or null to clear the selected date.

In case you are wondering, setting defaultDate property in the constructor does not update the associated control.

All you have to do is use days instead of day like this:

<?php
$Date = "2010-09-17";
echo date('Y-m-d', strtotime($Date. ' + 1 days'));
echo date('Y-m-d', strtotime($Date. ' + 2 days'));
?>

And it outputs correctly:

2010-09-18
2010-09-19

Comparison of 18 color swatches rendered 100 times on a page as small rectangles, once with background and once with background-color.

I recreated the CSS performance experiment and the results are significantly different nowadays.

background

Chrome 54: 443 (µs/div)

Firefox 49: 162 (µs/div)

Edge 10: 56 (µs/div)

background-color

Chrome 54: 449 (µs/div)

Firefox 49: 171 (µs/div)

Edge 10: 58 (µs/div)

As you see - there's almost no difference.

Amazon EC2 cannot offer Mac OS X EC2 instances due to Apple's tight licensing to only allow it to legally run on Apple hardware and the current EC2 infrastructure relies upon virtualized hardware.

Apple Mac image on Amazon EC2?

Can you run OS X on an Amazon EC2 instance?

There are other companies that do provide Mac OS X hosting, presumably on Apple hardware. One example is Go Daddy:

Go Daddy Product Catalog (see Mac® Powered Cloud Servers under Web Hosting)

To find more, search for "Mac OS X hosting" and you'll find more options.

You can pass PHP arrays to JavaScript using json_encode PHP function.

<?php
    $phpArray = array(
        0 => "Mon", 
        1 => "Tue", 
        2 => "Wed", 
        3 => "Thu",
        4 => "Fri", 
        5 => "Sat",
        6 => "Sun",
    )
?>

<script type="text/javascript">

    var jArray = <?php echo json_encode($phpArray); ?>;

    for(var i=0; i<jArray.length; i++){
        alert(jArray[i]);
    }

 </script>

Use this -

create table dummy_table_name as select * from source_table_name;

This will create the new table with existing data available on source_table_name.

Here I updated the sample code in Kotlin. Please note on Nougat and above version Uri.fromFile(file) is not working and it crashes the app for that need to implement FileProvider which is safest way to send files from intent. For implementing this refer this answer or this article

private fun takePhotoFromCamera() {
        val isDeviceSupportCamera: Boolean = this.packageManager.hasSystemFeature(PackageManager.FEATURE_CAMERA)
        if (isDeviceSupportCamera) {
            val takePictureIntent = Intent(MediaStore.ACTION_IMAGE_CAPTURE)

            if (takePictureIntent.resolveActivity(getPackageManager()) != null) {
                file = File(getExternalFilesDir(Environment.DIRECTORY_DOCUMENTS + "/attachments")!!.path,
                        System.currentTimeMillis().toString() + ".jpg")
//            fileUri = Uri.fromFile(file)
                fileUri = FileProvider.getUriForFile(this, this.applicationContext.packageName + ".provider", file!!)
                takePictureIntent.putExtra(MediaStore.EXTRA_OUTPUT, fileUri)
                if (Build.VERSION.SDK_INT <= Build.VERSION_CODES.LOLLIPOP) {
                    takePictureIntent.addFlags(Intent.FLAG_GRANT_WRITE_URI_PERMISSION)
                }
                startActivityForResult(takePictureIntent, Constants.REQUEST_CODE_IMAGE_CAPTURE)
            }

        } else {
            Toast.makeText(this, this.getString(R.string.camera_not_supported), Toast.LENGTH_SHORT).show()
        }
    }

override fun onActivityResult(requestCode: Int, resultCode: Int, data: Intent?) {
        super.onActivityResult(requestCode, resultCode, data)
        if (resultCode == Activity.RESULT_OK) {
             if(requestCode == Constants.REQUEST_CODE_IMAGE_CAPTURE) {
                realPath = file?.path
                 //do what ever you want to do
            }
    }
}

After much research, in many different devices, up to now, I've reached the simple conclusion that MP4 is much less supported than MOV format. So, I'm using MOV format, which is supported by all Android and Apple devices, on all browsers. I've detected weather the device is a mobile device or a desktop browser, and set the SRC accordingly:

if (IsMobile()) {
    $('#vid').attr('src', '/uploads/' + name + '.mov');
}
else {
    $('#vid').attr('src', '/uploads/' + name + '.webm');        
}

function IsMobile() {
    var isMobile = false; //initiate as false

    if (/(android|bb\d+|meego).+mobile|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(hone|od)|ipad|iris|kindle|Android|Silk|lge |maemo|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|series(4|6)0|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino/i.test(navigator.userAgent)
                || /1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|yas\-|your|zeto|zte\-/i.test(navigator.userAgent.substr(0, 4))) isMobile = true;
    return isMobile;
}

For mass assignment of values to an ActiveRecord model without saving, use either the assign_attributes or attributes= methods. These methods are available in Rails 3 and newer. However, there are minor differences and version-related gotchas to be aware of.

Both methods follow this usage:

@user.assign_attributes{ model: "Sierra", year: "2012", looks: "Sexy" }

@user.attributes = { model: "Sierra", year: "2012", looks: "Sexy" }

Note that neither method will perform validations or execute callbacks; callbacks and validation will happen when save is called.

Rails 3

attributes= differs slightly from assign_attributes in Rails 3. attributes= will check that the argument passed to it is a Hash, and returns immediately if it is not; assign_attributes has no such Hash check. See the ActiveRecord Attribute Assignment API documentation for attributes=.

The following invalid code will silently fail by simply returning without setting the attributes:

@user.attributes = [ { model: "Sierra" }, { year: "2012" }, { looks: "Sexy" } ]

attributes= will silently behave as though the assignments were made successfully, when really, they were not.

This invalid code will raise an exception when assign_attributes tries to stringify the hash keys of the enclosing array:

@user.assign_attributes([ { model: "Sierra" }, { year: "2012" }, { looks: "Sexy" } ])

assign_attributes will raise a NoMethodError exception for stringify_keys, indicating that the first argument is not a Hash. The exception itself is not very informative about the actual cause, but the fact that an exception does occur is very important.

The only difference between these cases is the method used for mass assignment: attributes= silently succeeds, and assign_attributes raises an exception to inform that an error has occurred.

These examples may seem contrived, and they are to a degree, but this type of error can easily occur when converting data from an API, or even just using a series of data transformation and forgetting to Hash[] the results of the final .map. Maintain some code 50 lines above and 3 functions removed from your attribute assignment, and you've got a recipe for failure.

The lesson with Rails 3 is this: always use assign_attributes instead of attributes=.

Rails 4

In Rails 4, attributes= is simply an alias to assign_attributes. See the ActiveRecord Attribute Assignment API documentation for attributes=.

With Rails 4, either method may be used interchangeably. Failure to pass a Hash as the first argument will result in a very helpful exception: ArgumentError: When assigning attributes, you must pass a hash as an argument.

Validations

If you're pre-flighting assignments in preparation to a save, you might be interested in validating before save, as well. You can use the valid? and invalid? methods for this. Both return boolean values. valid? returns true if the unsaved model passes all validations or false if it does not. invalid? is simply the inverse of valid?

valid? can be used like this:

@user.assign_attributes{ model: "Sierra", year: "2012", looks: "Sexy" }.valid?

This will give you the ability to handle any validations issues in advance of calling save.

Nobody answered with regular for loop? Sometimes I find it more readable and prefer for over foreach
So here it is:

$array = array('key1' => 'value1', 'key2' => 'value2'); 

$keys = array_keys($array);

for($i=0; $i < count($keys); ++$i) {
    echo $keys[$i] . ' ' . $array[$keys[$i]] . "\n";
}

/*
  prints:
  key1 value1
  key2 value2
*/

Django's Model class specifically handles having an attribute named Meta which is a class. It's not a general Python thing.

Python metaclasses are completely different.

Depends on the language and most likely its compiler, but they should be equivalent in most languages.

This happens when a session other than the one used to alter a table is holding a lock likely because of a DML (update/delete/insert). If you are developing a new system, it is likely that you or someone in your team issues the update statement and you could kill the session without much consequence. Or you could commit from that session once you know who has the session open.

If you have access to a SQL admin system use it to find the offending session. And perhaps kill it.

You could use v$session and v$lock and others but I suggest you google how to find that session and then how to kill it.

In a production system, it really depends. For oracle 10g and older, you could execute

LOCK TABLE mytable in exclusive mode;
alter table mytable modify mycolumn varchar2(5);

In a separate session but have the following ready in case it takes too long.

alter system kill session '....

It depends on what system do you have, older systems are more likely to not commit every single time. That is a problem since there may be long standing locks. So your lock would prevent any new locks and wait for a lock that who knows when will be released. That is why you have the other statement ready. Or you could look for PLSQL scripts out there that do similar things automatically.

In version 11g there is a new environment variable that sets a wait time. I think it likely does something similar to what I described. Mind you that locking issues don't go away.

ALTER SYSTEM SET ddl_lock_timeout=20;
alter table mytable modify mycolumn varchar2(5);

Finally it may be best to wait until there are few users in the system to do this kind of maintenance.

grep '(string1.*string2 | string2.*string1)' filename

will get line with string1 and string2 in any order

According to Extensible Messaging and Presence Protocol (Wikipedia), the standard TCP port for the server is 5222.

The client would presumably use the same ports as the messaging protocol, but can also use http (port 80) and https (port 443) for message delivery. These have the advantage of working for users behind firewalls, so your network admin should not need to get involved.

First off, it might not be good to just go by recall alone. You can simply achieve a recall of 100% by classifying everything as the positive class. I usually suggest using AUC for selecting parameters, and then finding a threshold for the operating point (say a given precision level) that you are interested in.

For how class_weight works: It penalizes mistakes in samples of class[i] with class_weight[i] instead of 1. So higher class-weight means you want to put more emphasis on a class. From what you say it seems class 0 is 19 times more frequent than class 1. So you should increase the class_weight of class 1 relative to class 0, say {0:.1, 1:.9}. If the class_weight doesn't sum to 1, it will basically change the regularization parameter.

For how class_weight="auto" works, you can have a look at this discussion. In the dev version you can use class_weight="balanced", which is easier to understand: it basically means replicating the smaller class until you have as many samples as in the larger one, but in an implicit way.

What helped me was

1) To view all available remote branches (e.g. 'remote-branch-name')

git branch -r

2) Create a local branch using remote branch name

git fetch && git checkout 'remote-branch-name'

If a is your array:

In [11]: a[:,:2]
Out[11]: 
array([[-0.57098887, -0.4274751 ],
       [-0.22279713, -0.51723555],
       [ 0.67492385, -0.69294472],
       [ 0.41086611,  0.26374238]])

Newer rfc6265 published in April 2011:

cookie-header = "Cookie:" OWS cookie-string OWS
cookie-string = cookie-pair *( ";" SP cookie-pair )
cookie-pair  = cookie-name "=" cookie-value
cookie-value = *cookie-octet / ( DQUOTE *cookie-octet DQUOTE )

cookie-octet = %x21 / %x23-2B / %x2D-3A / %x3C-5B / %x5D-7E
                   ; US-ASCII characters excluding CTLs,
                   ; whitespace DQUOTE, comma, semicolon,
                   ; and backslash

If you look to @bobince answer you see that newer restrictions are more strict.

In a very simple logging scenario, where you're literally just trying to write to console during development for debugging purposes, it might be easiest to just do a search and replace before your production build and comment out all the calls to Log or System.out.println.

For example, assuming you didn't use the "Log." anywhere outside of a call to Log.d or Log.e, etc, you could simply do a find and replace across the entire solution to replace "Log." with "//Log." to comment out all your logging calls, or in my case I'm just using System.out.println everywhere, so before going to production I'll simply do a full search and replace for "System.out.println" and replace with "//System.out.println".

I know this isn't ideal, and it would be nice if the ability to find and comment out calls to Log and System.out.println were built into Eclipse, but until that happens the easiest and fastest and best way to do this is to comment out by search and replace. If you do this, you don't have to worry about mismatching stack trace line numbers, because you're editing your source code, and you're not adding any overhead by checking some log level configuration, etc.

A static constructor looks like this

static class Foo
{
    static Foo()
    {
         // Static initialization code here
    }
}

It is executed only once when the type is first used. All classes can have static constructors, not just static classes.

I prefer to use == instead of equals:

Other reason, in addition to the others already discussed here, is you could introduce a bug without realizing it. Suppose you have this enums which is exactly the same but in separated pacakges (it's not common, but it could happen):

First enum:

package first.pckg

public enum Category {
    JAZZ,
    ROCK,
    POP,
    POP_ROCK
}

Second enum:

package second.pckg

public enum Category {
    JAZZ,
    ROCK,
    POP,
    POP_ROCK
}

Then suppose you use the equals like next in item.category which is first.pckg.Category but you import the second enum (second.pckg.Category) instead the first without realizing it:

import second.pckg.Category;
...

Category.JAZZ.equals(item.getCategory())

So you will get allways false due is a different enum although you expect true because item.getCategory() is JAZZ. And it could be be a bit difficult to see.

So, if you instead use the operator == you will have a compilation error:

operator == cannot be applied to "second.pckg.Category", "first.pckg.Category"

import second.pckg.Category; 
...

Category.JAZZ == item.getCategory() 

Easiest way:

byte[] buffer;
using (Stream stream = new IO.FileStream("file.pdf"))
{
   buffer = new byte[stream.Length - 1];
   stream.Read(buffer, 0, buffer.Length);
}

using (Stream stream = new IO.FileStream("newFile.pdf"))
{
   stream.Write(buffer, 0, buffer.Length);
}

Or something along these lines...

Not sure if this is relevant but I had the same problem with Fiddler after the last update (v2.4.5.0). I turned all filters off but still wasn't picking up any traffic. When I unchecked Use Filters on the filters tab, however, all traffic was picked up as normal. I'm still trying to figure out how I can use filters when just checking Use Filters box causes all traffic to be blocked.

For people using Windows and struggling to download repo as zip from terminal:

url -L http://github.com/GorvGoyl/Notion-Boost-browser-extension/archive/master.zip --output master.zip

I had a case where solution was hard to figure out. This is not exactly relevant to particular question, but might help someone looking to solve a case with same error message when strptime is fed with timezone information. In my case, the reason for throwing

ValueError: time data '2016-02-28T08:27:16.000-07:00' does not match format '%Y-%m-%dT%H:%M:%S.%f%z'

was presence of last colon in the timezone part. While in some locales (Russian one, for example) code was able to execute well, in another (English one) it was failing. Removing the last colon helped remedy my situation.

To assign a non-empty variable without repeating the actual variable name (and without assigning anything if variable is null!), you can use a little helper method with a Action parameter:

public static void CallIfNonEmpty(string value, Action<string> action)
{
    if (!string.IsNullOrEmpty(value))
        action(value);
}

And then just use it:

CallIfNonEmpty(this.approved_by, (s) => planRec.approved_by = s);

Hey I found a permanent solution that should work in every case!

For normal webdevelopment

<script type="text/javascript"> 
$("video").each(function(){jQuery(this).append('controlsList="nodownload"')}); 
</script>

HTML5 videos that has preload on false

$( document ).ready(function() {
  $("video").each(function(){
    $(this).attr('controlsList','nodownload');
    $(this).load();
  });
});

$ undevinded? --> Debug modus!

<script type="text/javascript"> 
jQuery("video").each(function(){jQuery(this).append('controlsList="nodownload"')}); 
</script>

HTML5 videos that has preload on false

jQuery( document ).ready(function() {
  jQuery("video").each(function(){
    jQuery(this).attr('controlsList','nodownload');
    jQuery(this).load();
  });
});

Let me know if it helped you out!

The number type has a step value controlling which numbers are valid (along with max and min), which defaults to 1. This value is also used by implementations for the stepper buttons (i.e. pressing up increases by step).

Simply change this value to whatever is appropriate. For money, two decimal places are probably expected:

<input type="number" step="0.01">

(I'd also set min=0 if it can only be positive)

If you'd prefer to allow any number of decimal places, you can use step="any" (though for currencies, I'd recommend sticking to 0.01). In Chrome & Firefox, the stepper buttons will increment / decrement by 1 when using any. (thanks to Michal Stefanow's answer for pointing out any, and see the relevant spec here)

Here's a playground showing how various steps affect various input types:

<form>_x000D_
  <input type=number step=1 /> Step 1 (default)<br />_x000D_
  <input type=number step=0.01 /> Step 0.01<br />_x000D_
  <input type=number step=any /> Step any<br />_x000D_
  <input type=range step=20 /> Step 20<br />_x000D_
  <input type=datetime-local step=60 /> Step 60 (default)<br />_x000D_
  <input type=datetime-local step=1 /> Step 1<br />_x000D_
  <input type=datetime-local step=any /> Step any<br />_x000D_
  <input type=datetime-local step=0.001 /> Step 0.001<br />_x000D_
  <input type=datetime-local step=3600 /> Step 3600 (1 hour)<br />_x000D_
  <input type=datetime-local step=86400 /> Step 86400 (1 day)<br />_x000D_
  <input type=datetime-local step=70 /> Step 70 (1 min, 10 sec)<br />_x000D_
</form>

As usual, I'll add a quick note: remember that client-side validation is just a convenience to the user. You must also validate on the server-side!

Convert the text view to an image, and the scale the image within the boundaries.

Here's an example on how to convert a view to an Image: Converting a view to Bitmap without displaying it in Android?

The problem is, your text will not be selectable, but it should do the trick. I haven't tried it, so I'm not sure how it would look (because of the scaling).

You can write like below. Check out the syntax guidelines in this thread

AClass[] array;
...
array = new AClass[]{object1, object2};

If you find arrays annoying better use ArrayList.

In my case, forgot to define Primary Key to Table. So assign like shown in Picture and Refresh your table from "Update model from Database" from .edmx file. Hope it will help !!!

OK, very obvious answer here... basically relative position is relative to previous element or window, while absolute don't care about the other elements unless it's a parent if you using top and left...

Look at the example I create for you to show the differences...

Also you can see it in action, using the css I create for you, you can see how absolute and relative positions behave:

.parent {_x000D_
  display: inline-block;_x000D_
  width: 180px;_x000D_
  height: 160px;_x000D_
  border: 1px solid black;_x000D_
}_x000D_
_x000D_
.black {_x000D_
  position: relative;_x000D_
  width: 100px;_x000D_
  height: 30px;_x000D_
  margin: 5px;_x000D_
  border: 1px solid black;_x000D_
}_x000D_
_x000D_
.red {_x000D_
  width: 100px;_x000D_
  height: 30px;_x000D_
  margin: 5px;_x000D_
  top: 16px;_x000D_
  background: red;_x000D_
  border: 1px solid red;_x000D_
}_x000D_
_x000D_
.red-1 {_x000D_
  position: relative;_x000D_
}_x000D_
_x000D_
.red-2 {_x000D_
  position: absolute;_x000D_
}

<div class="parent">_x000D_
  <div class="black">_x000D_
  </div>_x000D_
  <div class="red red-1">_x000D_
  </div>_x000D_
</div>_x000D_
_x000D_
<div class="parent">_x000D_
  <div class="black">_x000D_
  </div>_x000D_
  <div class="red red-2">_x000D_
  </div>_x000D_
</div>

Why?

You asked why it happens, let's see:

The official language specificaion dictates a call to the internal [[GetValue]] method. Your .attr returns undefined and you're trying to access its length.

If Type(V) is not Reference, return V.

This is true, since undefined is not a reference (alongside null, number, string and boolean)

Let base be the result of calling GetBase(V).

This gets the undefined part of myVar.length .

If IsUnresolvableReference(V), throw a ReferenceError exception.

This is not true, since it is resolvable and it resolves to undefined.

If IsPropertyReference(V), then

This happens since it's a property reference with the . syntax.

Now it tries to convert undefined to a function which results in a TypeError.

I don't see any margin or margin-left declarations for #footer-wrap li.

This ought to do the trick:

#footer-wrap ul,
#footer-wrap li {
    margin-left: 0;
    list-style-type: none;
}

The TextField widget is required to set keyboardType: TextInputType.number, and inputFormatters: <TextInputFormatter>[FilteringTextInputFormatter.digitsOnly] to accept numbers only as input.

     TextField(
            keyboardType: TextInputType.number,
            inputFormatters: <TextInputFormatter>[
              FilteringTextInputFormatter.digitsOnly
            ], // Only numbers can be entered
          ),

Example in DartPad

import 'package:flutter/material.dart';
import 'package:flutter/services.dart';

    void main() => runApp(new MyApp());
    
    class MyApp extends StatelessWidget {
      @override
      Widget build(BuildContext context) {
        return MaterialApp(
          home: HomePage(),
          theme: ThemeData(primarySwatch: Colors.blue),
        );
      }
    }
    
    class HomePage extends StatefulWidget {
      @override
      State<StatefulWidget> createState() {
        return HomePageState();
      }
    }
    
    class HomePageState extends State<HomePage> {
      @override
      Widget build(BuildContext context) {
        return Scaffold(
          backgroundColor: Colors.white,
          body: Container(
              padding: const EdgeInsets.all(40.0),
              child: Column(
                mainAxisAlignment: MainAxisAlignment.center,
                children: <Widget>[
                  Text("This Input accepts Numbers only"),
                  SizedBox(height: 20),
                  TextField(
                    decoration: InputDecoration(
                      focusedBorder: OutlineInputBorder(
                        borderSide:
                            BorderSide(color: Colors.greenAccent, width: 5.0),
                      ),
                      enabledBorder: OutlineInputBorder(
                        borderSide: BorderSide(color: Colors.red, width: 5.0),
                      ),
                      hintText: 'Mobile Number',
                    ),
                    keyboardType: TextInputType.number,
                    inputFormatters: <TextInputFormatter>[
                      FilteringTextInputFormatter.digitsOnly
                    ], // Only numbers can be entered
                  ),
                  SizedBox(height: 20),
                  Text("You can test be Typing"),
                ],
              )),
        );
      }
    }

WAI-ARIA is a spec defining support for accessible web apps. It defines bunch of markup extensions (mostly as attributes on HTML5 elements), which can be used by the web app developer to provide additional information about the semantics of the various elements to assistive technologies like screen readers. Of course, for ARIA to work, the HTTP user agent that interprets the markup needs to support ARIA, but the spec is created in such a way, as to allow down-level user agents to ignore the ARIA-specific markup safely without affecting the web app's functionality.

Here's an example from the ARIA spec:

<ul role="menubar">

  <!-- Rule 2A: "File" label via aria-labelledby -->
  <li role="menuitem" aria-haspopup="true" aria-labelledby="fileLabel"><span id="fileLabel">File</span>
    <ul role="menu">

      <!-- Rule 2C: "New" label via Namefrom:contents -->
      <li role="menuitem" aria-haspopup="false">New</li>
      <li role="menuitem" aria-haspopup="false">Open…</li>
      ...
    </ul>
  </li>
  ...
</ul>

Note the role attribute on the outer <ul> element. This attribute does not affect in any way how the markup is rendered on the screen by the browser; however, browsers that support ARIA will add OS-specific accessibility information to the rendered UI element, so that the screen reader can interpret it as a menu and read it aloud with enough context for the end-user to understand (for example, an explicit "menu" audio hint) and is able to interact with it (for example, voice navigation).

text-align:center

Applying the text-align:center style to an element containing elements will center those elements.

<div id="method-one" style="text-align:center">
  CSS `text-align:center`
</div>

Thomas Shields mentions this method

margin:0 auto

Applying the margin:0 auto style to a block element will center it within the element it is in.

<div id="method-two" style="background-color:green">
  <div style="margin:0 auto;width:50%;background-color:lightblue">
    CSS `margin:0 auto` to have left and right margin set to center a block element within another element.
  </div>
</div>

user1468562 mentions this method

Center tag

My original answer was that you can use the <center></center> tag. To do this, just place the content you want centered between the tags. As of HTML4, this tag has been deprecated, though. <center> is still technically supported today (9 years later at the time of updating this), but I'd recommend the CSS alternatives I've included above.

<h3>Method 3</h1>
<div id="method-three">
  <center>Center tag (not recommended and deprecated in HTML4)</center>
</div>

You can see these three code samples in action in this jsfiddle.

I decided I should revise this answer as the previous one I gave was outdated. It was already deprecated when I suggested it as a solution and that's all the more reason to avoid it now 9 years later.

Just a note to add on here: it's now 3 years later, yet this post is top in Google when you type in "How to search an S3 Bucket."

Perhaps you're looking for something more complex, but if you landed here trying to figure out how to simply find an object (file) by it's title, it's crazy simple:

open the bucket, select "none" on the right hand side, and start typing in the file name.

http://docs.aws.amazon.com/AmazonS3/latest/UG/ListingObjectsinaBucket.html

I just use TortoiseGit straight out the box. It integrates beautifully with my PuTTY public keys.

It has a perfect editor for commit messages.

If you're looking for something lightweight checkout schedule:

import schedule
import time

def job():
    print("I'm working...")

schedule.every(10).minutes.do(job)
schedule.every().hour.do(job)
schedule.every().day.at("10:30").do(job)

while 1:
    schedule.run_pending()
    time.sleep(1)

Disclosure: I'm the author of that library.

You can do something like this to read 10 bytes:

char buffer[10];
read(STDIN_FILENO, buffer, 10);

remember read() doesn't add '\0' to terminate to make it string (just gives raw buffer).

To read 1 byte at a time:

char ch;
while(read(STDIN_FILENO, &ch, 1) > 0)
{
 //do stuff
}

and don't forget to #include <unistd.h>, STDIN_FILENO defined as macro in this file.

There are three standard POSIX file descriptors, corresponding to the three standard streams, which presumably every process should expect to have:

Integer value   Name
       0        Standard input (stdin)
       1        Standard output (stdout)
       2        Standard error (stderr)

So instead STDIN_FILENO you can use 0.

Edit:
In Linux System you can find this using following command:

$ sudo grep 'STDIN_FILENO' /usr/include/* -R | grep 'define'
/usr/include/unistd.h:#define   STDIN_FILENO    0   /* Standard input.  */

Notice the comment /* Standard input. */

Using ggplot and a little dplyr for data manipulation:

set.seed(42)
df <- data.frame(x = rep(1:10,each=5), y = rnorm(50))

library(ggplot2)
library(dplyr)

df.summary <- df %>% group_by(x) %>%
    summarize(ymin = min(y),
              ymax = max(y),
              ymean = mean(y))

ggplot(df.summary, aes(x = x, y = ymean)) +
    geom_point(size = 2) +
    geom_errorbar(aes(ymin = ymin, ymax = ymax))

If there's an additional grouping column (OP's example plot has two errorbars per x value, saying the data is sourced from two files), then you should get all the data in one data frame at the start, add the grouping variable to the dplyr::group_by call (e.g., group_by(x, file) if file is the name of the column) and add it as a "group" aesthetic in the ggplot, e.g., aes(x = x, y = ymean, group = file).

The sql array type is not neccessary. Not if the element type is a primitive one. (Varchar, number, date,...)

Very basic sample:

declare
  type TPidmList is table of sgbstdn.sgbstdn_pidm%type;
  pidms TPidmList;
begin
  select distinct sgbstdn_pidm
  bulk collect into pidms
  from sgbstdn
  where sgbstdn_majr_code_1 = 'HS04'
  and sgbstdn_program_1 = 'HSCOMPH';

  -- do something with pidms

  open :someCursor for
    select value(t) pidm
    from table(pidms) t;
end;

When you want to reuse it, then it might be interesting to know how that would look like. If you issue several commands than those could be grouped in a package. The private package variable trick from above has its downsides. When you add variables to a package, you give it state and now it doesn't act as a stateless bunch of functions but as some weird sort of singleton object instance instead.

e.g. When you recompile the body, it will raise exceptions in sessions that already used it before. (because the variable values got invalided)

However, you could declare the type in a package (or globally in sql), and use it as a paramter in methods that should use it.

create package Abc as
  type TPidmList is table of sgbstdn.sgbstdn_pidm%type;

  function CreateList(majorCode in Varchar, 
                      program in Varchar) return TPidmList;

  function Test1(list in TPidmList) return PLS_Integer;
  -- "in" to make it immutable so that PL/SQL can pass a pointer instead of a copy
  procedure Test2(list in TPidmList);
end;

create package body Abc as

  function CreateList(majorCode in Varchar, 
                      program in Varchar) return TPidmList is
    result TPidmList;
  begin
    select distinct sgbstdn_pidm
    bulk collect into result
    from sgbstdn
    where sgbstdn_majr_code_1 = majorCode
    and sgbstdn_program_1 = program;

    return result;
  end;

  function Test1(list in TPidmList) return PLS_Integer is
    result PLS_Integer := 0;
  begin
    if list is null or list.Count = 0 then
      return result;
    end if;

    for i in list.First .. list.Last loop
      if ... then
        result := result + list(i);
      end if;
    end loop;
  end;

  procedure Test2(list in TPidmList) as
  begin
    ...
  end;

  return result;
end;

How to call it:

declare
  pidms constant Abc.TPidmList := Abc.CreateList('HS04', 'HSCOMPH');
  xyz PLS_Integer;
begin
  Abc.Test2(pidms);
  xyz := Abc.Test1(pidms);
  ...

  open :someCursor for
    select value(t) as Pidm,
           xyz as SomeValue
    from   table(pidms) t;
end;

You can used a custom view to do that. With this solution, it's finished the gradient shapes of all colors in your projects:

class GradientView(context: Context, attrs: AttributeSet) : View(context, attrs) {

    // Properties
    private val paint: Paint = Paint()
    private val rect = Rect()

    //region Attributes
    var start: Int = Color.WHITE
    var end: Int = Color.WHITE
    //endregion

    override fun onSizeChanged(w: Int, h: Int, oldw: Int, oldh: Int) {
        super.onSizeChanged(w, h, oldw, oldh)
        // Update Size
        val usableWidth = width - (paddingLeft + paddingRight)
        val usableHeight = height - (paddingTop + paddingBottom)
        rect.right = usableWidth
        rect.bottom = usableHeight
        // Update Color
        paint.shader = LinearGradient(0f, 0f, width.toFloat(), 0f,
                start, end, Shader.TileMode.CLAMP)
        // ReDraw
        invalidate()
    }

    override fun onDraw(canvas: Canvas) {
        super.onDraw(canvas)
        canvas.drawRect(rect, paint)
    }

}

I also create an open source project GradientView with this custom view:

https://github.com/lopspower/GradientView

implementation 'com.mikhaellopez:gradientview:1.1.0'

You can set any font style, family, size for the label, by clicking on letter "T" in Font field.

Typically with Angular you would be outputting these spans using the ngRepeat directive and (like in your case) each item would have an id. I know this is not true for all situations but it is typical if requesting data from a backend - objects in an array tend to have unique identifiers.

You can use this id to facilitate the toggling of classes on items in your list (see plunkr or code below).

Using the objects id's can also eliminate the undesirable effect when the $index (described in other answers) is messed up due to sorting in Angular.

Example Plunkr: http://plnkr.co/edit/na0gUec6cdMABK9L6drV

(basically apply the .active-selection class if the person.id is equal to $scope.activeClass - which we set when the user clicks an item.

Hope this helps someone, I've found expressions in ng-class to be very useful!

HTML

<ul>
  <li ng-repeat="person in people" 
  data-ng-class="{'active-selection': person.id == activeClass}">
    <a data-ng-click="selectPerson(person.id)">
      {{person.name}}
    </a>
  </li>
</ul>

JS

app.controller('MainCtrl', function($scope) {
  $scope.people = [{
    id: "1",
    name: "John",
  }, {
    id: "2",
    name: "Lucy"
  }, {
    id: "3",
    name: "Mark"
  }, {
    id: "4",
    name: "Sam"
  }];

  $scope.selectPerson = function(id) {
    $scope.activeClass = id;
    console.log(id);
  };
});    

CSS:

.active-selection {
  background-color: #eee;
}

Add the flag -Xss1024k in the VM Arguments.

You can also increase stack size in mb by using -Xss1m for example .

From your comments, it seems like you're looking for "best practices" for the use of the Boolean wrapper class. But there really aren't any best practices, because it's a bad idea to use this class to begin with. The only reason to use the object wrapper is in cases where you absolutely must (such as when using Generics, i.e., storing a boolean in a HashMap<String, Boolean> or the like). Using the object wrapper has no upsides and a lot of downsides, most notably that it opens you up to NullPointerExceptions.

Does it matter if '!' is used instead of .equals() for Boolean?

Both techniques will be susceptible to a NullPointerException, so it doesn't matter in that regard. In the first scenario, the Boolean will be unboxed into its respective boolean value and compared as normal. In the second scenario, you are invoking a method from the Boolean class, which is the following:

public boolean equals(Object obj) {
    if (obj instanceof Boolean) {
        return value == ((Boolean)obj).booleanValue();
    }
    return false;
}

Either way, the results are the same.

Would it matter if .equals(false) was used to check for the value of the Boolean checker?

Per above, no.

Secondary question: Should Boolean be dealt differently than boolean?

If you absolutely must use the Boolean class, always check for null before performing any comparisons. e.g.,

Map<String, Boolean> map = new HashMap<String, Boolean>();
//...stuff to populate the Map
Boolean value = map.get("someKey");
if(value != null && value) {
    //do stuff
}

This will work because Java short-circuits conditional evaluations. You can also use the ternary operator.

boolean easyToUseValue = value != null ? value : false;

But seriously... just use the primitive type, unless you're forced not to.

The cross-platform way:

import time
import sys
for i in range(1,6):
    sys.stdout.write('\r\a{i}'.format(i=i))
    sys.stdout.flush()
    time.sleep(1)
sys.stdout.write('\n')

In Command Prompt, you can use the command telnet.. For Example, to connect to IP 192.168.10.1 with port 80,

telnet 192.168.10.1 80

To enable telnet in Windows 7 and above click. From the linked article, enable telnet through control panel -> programs and features -> windows features -> telnet client, or just run this in an admin prompt:

dism /online /Enable-Feature /FeatureName:TelnetClient

You need to add a pseudo-hostname to the CALLBACK_URL 'app://' doesn't make sense as a URL and cannot be parsed.

The <hr> should be placed inside a <div> for proper functioning.

Place it like this to get desired width `

<div class='row'>
        <div class='col-lg-8 col-lg-offset-2'>
        <hr>
       </div>
       </div>

`

Hope this helps a future reader!

To add bold, italic and underline, just add the following to the font argument:

font=("Arial", 8, 'normal', 'bold', 'italic', 'underline')

No you don't have to put credentials, You have to put headers on client side eg:

 $http({
        url: 'url of service',
        method: "POST",
        data: {test :  name },
        withCredentials: true,
        headers: {
                    'Content-Type': 'application/json; charset=utf-8'
        }
    });

And and on server side you have to put headers to this is example for nodejs:

/**
 * On all requests add headers
 */
app.all('*', function(req, res,next) {


    /**
     * Response settings
     * @type {Object}
     */
    var responseSettings = {
        "AccessControlAllowOrigin": req.headers.origin,
        "AccessControlAllowHeaders": "Content-Type,X-CSRF-Token, X-Requested-With, Accept, Accept-Version, Content-Length, Content-MD5,  Date, X-Api-Version, X-File-Name",
        "AccessControlAllowMethods": "POST, GET, PUT, DELETE, OPTIONS",
        "AccessControlAllowCredentials": true
    };

    /**
     * Headers
     */
    res.header("Access-Control-Allow-Credentials", responseSettings.AccessControlAllowCredentials);
    res.header("Access-Control-Allow-Origin",  responseSettings.AccessControlAllowOrigin);
    res.header("Access-Control-Allow-Headers", (req.headers['access-control-request-headers']) ? req.headers['access-control-request-headers'] : "x-requested-with");
    res.header("Access-Control-Allow-Methods", (req.headers['access-control-request-method']) ? req.headers['access-control-request-method'] : responseSettings.AccessControlAllowMethods);

    if ('OPTIONS' == req.method) {
        res.send(200);
    }
    else {
        next();
    }


});

Provided that you can use .NET 3.5 (or newer) and LINQ, try

int sum = arr.Sum();

Long answer: it is possible!

1. Temporarily rename existing xampp folder
2. Install xampp 1.7.7 into xampp folder name
3. Folder containing just installed 1.7.7 distribution rename to different name and previously existing xampp folder rename back just to xampp.
4. In xampp folder rename php and apache folders to different names (I propose php_prev and apache_prev) so you can after switch back to them by renaming them back.
5. Copy apache and php folders from folder with xampp 1.7.7 into xampp directory

6. In xampp directory comment line apache/conf/httpd.conf:458

   #Include "conf/extra/httpd-perl.conf"

7. In xampp directory do next replaces in files:

php/pci.bat:15

from

"C:\xampp\php\.\php.exe" -f "\xampp\php\pci" -- %*

to

set XAMPPPHPDIR=C:\xampp\php "%XAMPPPHPDIR%\php.exe" -f "%XAMPPPHPDIR%\pci" -- %*

php/pciconf.bat:15

from

"C:\xampp\php\.\php.exe" -f "\xampp\php\pciconf" -- %*

to

set XAMPPPHPDIR=C:\xampp\php "%XAMPPPHPDIR%\.\php.exe" -f "%XAMPPPHPDIR%\pciconf" -- %*

php/pear.bat:33

from

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\.\php.exe"

to

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\php.exe"

php/peardev.bat:33

from

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\.\php.exe"

to

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\php.exe"

php/pecl.bat:32

from

IF "%PHP_PEAR_BIN_DIR%"=="" SET "PHP_PEAR_BIN_DIR=C:\xampp\php" IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\.\php.exe"

to

IF "%PHP_PEAR_BIN_DIR%"=="" SET "PHP_PEAR_BIN_DIR=C:\xampp\php\" IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\php.exe"

php/phar.phar.bat:1

from

%~dp0php.exe %~dp0pharcommand.phar %*

to

"%~dp0php.exe" "%~dp0pharcommand.phar" %*

Enjoy new XAMPP with PHP 5.3

Checked by myself in XAMPP 5.6.31, 7.0.15 & 7.1.1 with XAMPP Control Panel v3.2.2

You can call bash directly within your Makefile instead of using the default shell:

bash -c "ls -al"

instead of:

ls -al

This error also occurs when you choose "src" folder for your workspace folder.

When the root folder, folder where the "src", "node_modules" are located is chosen, the error disappears

It's easy. If you have two or more running container, complete next steps:

docker network create myNetwork
docker network connect myNetwork web1
docker network connect myNetwork web2

Now you connect from web1 to web2 container or the other way round.

Use the internal network IP addresses which you can find by running:

docker network inspect myNetwork

Note that only internal IP addresses and ports are accessible to the containers connected by the network bridge.

So for example assuming that web1 container was started with: docker run -p 80:8888 web1 (meaning that its server is running on port 8888 internally), and inspecting myNetwork shows that web1's IP is 172.0.0.2, you can connect from web2 to web1 using curl 172.0.0.2:8888).

For yet another concrete use case, use double brackets when you want to select a data frame created by the split() function. If you don't know, split() groups a list/data frame into subsets based on a key field. It's useful if when you want to operate on multiple groups, plot them, etc.

> class(data)
[1] "data.frame"

> dsplit<-split(data, data$id)
> class(dsplit)
[1] "list"

> class(dsplit['ID-1'])
[1] "list"

> class(dsplit[['ID-1']])
[1] "data.frame"

On small device : 4 columns x 3 (= 12) ==> col-sm-3

On extra small : 3 columns x 4 (= 12) ==> col-xs-4

 <footer class="row">
        <nav class="col-xs-4 col-sm-3">
            <ul class="list-unstyled">
            <li>Text 1</li>
            <li>Text 2</li>
            <li>Text 3</li>
            </ul>
        </nav>
        <nav class="col-xs-4 col-sm-3">
            <ul class="list-unstyled">
            <li>Text 4</li>
            <li>Text 5</li>
            <li>Text 6</li>
            </ul>
        </nav>
        <nav class="col-xs-4 col-sm-3">
            <ul class="list-unstyled">
            <li>Text 7</li>
            <li>Text 8</li>
            <li>Text 9</li>
            </ul>
        </nav>
        <nav class="hidden-xs col-sm-3">
            <ul class="list-unstyled">
            <li>Text 10</li>
            <li>Text 11</li>
            <li>Text 12</li>
            </ul>
        </nav>
    </footer>

As you say, hidden-xs is not enough, you have to combine xs and sm class.

Here is links to the official doc about available responsive classes and about the grid system.

Have in head :

• 1 row = 12 cols
• For XtraSmall device : col-xs-__
  
• For SMall device : col-sm-__
  
• For MeDium Device: col-md-__
  
• For LarGe Device : col-lg-__
  
• Make visible only (hidden on other) : visible-md (just visible in medium [not in lg xs or sm])
• Make hidden only (visible on other) : hidden-xs (just hidden in XtraSmall)

This is documented in the 'R Installation and Administration' manual that came with your installation.

On my Linux box:

R> .libPaths()
[1] "/usr/local/lib/R/site-library" "/usr/lib/R/site-library"      
[3] "/usr/lib/R/library"           
R> 

meaning that the default path is the first of these. You can override that via an argument to both install.packages() (from inside R) or R CMD INSTALL (outside R).

You can also override by setting the R_LIBS_USER variable.

You can use OLDand NEW in the trigger to access those values which had changed in that trigger. Mysql Ref

This linker error usually (in my experience) means that you've overridden a virtual function in a child class with a declaration, but haven't given a definition for the method. For example:

class Base
{
    virtual void f() = 0;
}
class Derived : public Base
{
    void f();
}

But you haven't given the definition of f. When you use the class, you get the linker error. Much like a normal linker error, it's because the compiler knew what you were talking about, but the linker couldn't find the definition. It's just got a very difficult to understand message.

Just use this constructor of List<T>. It accepts any IEnumerable<T> as an argument.

string[] arr = ...
List<string> list = new List<string>(arr);

Any user whose login shell setting in /etc/passwd is an interactive shell can login. I don't think there's a totally reliable way to tell if a program is an interactive shell; checking whether it's in /etc/shells is probably as good as you can get.

Other users can also login, but the program they run should not allow them to get much access to the system. And users that aren't allowed to login at all should have /etc/false as their shell -- this will just log them out immediately.

I had same error. First I update cocoapods using

sudo gem install cocoapods

then install pods using Pod install command worked for me.

Yes, use the File API, then you can process the images with the canvas element.

This Mozilla Hacks blog post walks you through most of the process. For reference here's the assembled source code from the blog post:

// from an input element
var filesToUpload = input.files;
var file = filesToUpload[0];

var img = document.createElement("img");
var reader = new FileReader();  
reader.onload = function(e) {img.src = e.target.result}
reader.readAsDataURL(file);

var ctx = canvas.getContext("2d");
ctx.drawImage(img, 0, 0);

var MAX_WIDTH = 800;
var MAX_HEIGHT = 600;
var width = img.width;
var height = img.height;

if (width > height) {
  if (width > MAX_WIDTH) {
    height *= MAX_WIDTH / width;
    width = MAX_WIDTH;
  }
} else {
  if (height > MAX_HEIGHT) {
    width *= MAX_HEIGHT / height;
    height = MAX_HEIGHT;
  }
}
canvas.width = width;
canvas.height = height;
var ctx = canvas.getContext("2d");
ctx.drawImage(img, 0, 0, width, height);

var dataurl = canvas.toDataURL("image/png");

//Post dataurl to the server with AJAX

For a simple plain JavaScript implementation:

window.onbeforeunload = function () {_x000D_
  window.scrollTo(0, 0);_x000D_
}

function getExtension($str) 
    {

          $i = strrpos($str,".");
         if (!$i) { return ""; } 

         $l = strlen($str) - $i;
         $ext = substr($str,$i+1,$l);
         return $ext;
    }

$valid_formats = array("jpg", "png", "gif", "bmp","jpeg","PNG","JPG","JPEG","GIF","BMP");
if(isset($_POST) and $_SERVER['REQUEST_METHOD'] == "POST")
    {
        $name = $_FILES['photoimg']['name'];
        $size = $_FILES['photoimg']['size'];

        if(strlen($name))
            {
                 $ext = getExtension($name);
                if(in_array($ext,$valid_formats))
                {
                if($size<(1024*1024))
                    {
                        $actual_image_name = time().substr(str_replace(" ", "_", $txt), 5).".".$ext;
                        $tmp = $_FILES['photoimg']['tmp_name'];
                        if(move_uploaded_file($tmp, $path.$actual_image_name))
                            {


                            mysql_query("INSERT INTO users (uid, profile_image) VALUES ('$session_id' , '$actual_image_name')");

                                echo "<img src='uploads/".$actual_image_name."'  class='preview'>";
                            }
                        else
                            echo "Fail upload folder with read access.";
                    }
                    else
                    echo "Image file size max 1 MB";                    
                    }
                    else
                    echo "Invalid file format..";   
            }

        else
            echo "Please select image..!";

        exit;
    }

I found this answer when I was getting a similar error for nodeName after upgrading to Bootstrap 4. The issue was that the tabs didn't have the nav and nav-tab classes; adding those to the <ul> element fixed the issue.

You can do the following:

df =DataFrame({'a':[1,2,3,4],'b':[2,4,6,8]})

df['x']=df.a + df.b
df['y']=df.a - df.b

create column title whatever order you want in this way:

column_titles = ['x','y','a','b']

df.reindex(columns=column_titles)

This will give you desired output

It seems that the only way to do this is to prevent Location Spoofing preventing MockLocations. The down side is there are some users who use Bluetooth GPS devices to get a better signal, they won't be able to use the app as they are required to use the mock locations.

To do this, I did the following :

// returns true if mock location enabled, false if not enabled.
if (Settings.Secure.getString(getContentResolver(),
       Settings.Secure.ALLOW_MOCK_LOCATION).equals("0")) 
       return false; 
       else return true;

Try this.

string path = @"E:\AppServ\Example.txt";
if (!File.Exists(path))
{
    using (var txtFile = File.AppendText(path))
    {
        txtFile.WriteLine("The very first line!");
    }
}
else if (File.Exists(path))
{     
    using (var txtFile = File.AppendText(path))
    {
        txtFile.WriteLine("The next line!");
    }
}

As the other answers said, it's because of the new System Integrity Protection, but I believe the other answers are overcomplicated.

If you're only gonna use that package in the current user, you should be able to install it just fine, without the need to disable the SIP, by using the --user flag. Like this:

sudo pip install --user packagename

From Overview of Numeric Types;

BIT[(M)]

A bit-field type. M indicates the number of bits per value, from 1 to 64. The default is 1 if M is omitted.

This data type was added in MySQL 5.0.3 for MyISAM, and extended in 5.0.5 to MEMORY, InnoDB, BDB, and NDBCLUSTER. Before 5.0.3, BIT is a synonym for TINYINT(1).

TINYINT[(M)] [UNSIGNED] [ZEROFILL]

A very small integer. The signed range is -128 to 127. The unsigned range is 0 to 255.

Additionally consider this;

BOOL, BOOLEAN

These types are synonyms for TINYINT(1). A value of zero is considered false. Non-zero values are considered true.

If that is the entire line, it very well might be because you are missing a ; at the end of the line.

You can't wait() on an object unless the current thread owns that object's monitor. To do that, you must synchronize on it:

class Runner implements Runnable
{
  public void run()
  {
    try
    {
      synchronized(Main.main) {
        Main.main.wait();
      }
    } catch (InterruptedException e) {}
    System.out.println("Runner away!");
  }
}

The same rule applies to notify()/notifyAll() as well.

The Javadocs for wait() mention this:

This method should only be called by a thread that is the owner of this object's monitor. See the notify method for a description of the ways in which a thread can become the owner of a monitor.

Throws:

IllegalMonitorStateException – if the current thread is not the owner of this object's monitor.

And from notify():

A thread becomes the owner of the object's monitor in one of three ways:

• By executing a synchronized instance method of that object.
• By executing the body of a synchronized statement that synchronizes on the object.
• For objects of type Class, by executing a synchronized static method of that class.

ORDER BY article_rating, article_time DESC

will sort by article_time only if there are two articles with the same rating. From all I can see in your example, this is exactly what happens.

? primary sort                         secondary sort ?
1.  50 | This article rocks          | Feb 4, 2009    3.
2.  35 | This article is pretty good | Feb 1, 2009    2.
3.  5  | This Article isn't so hot   | Jan 25, 2009   1.

but consider:

? primary sort                         secondary sort ?
1.  50 | This article rocks          | Feb 2, 2009    3.
1.  50 | This article rocks, too     | Feb 4, 2009    4.
2.  35 | This article is pretty good | Feb 1, 2009    2.
3.  5  | This Article isn't so hot   | Jan 25, 2009   1.

After a full day working on this feature finally able to get the right answer.

First, create the following classes:

import android.util.Log;
import android.view.MotionEvent;
import android.view.View;

/**
 * Created by hoshyar on 1/19/17.
 */

public class SwipeDetector implements View.OnTouchListener {

    public static enum Action {
        LR, // Left to Right
        RL, // Right to Left
        TB, // Top to bottom
        BT, // Bottom to Top
        None // when no action was detected
    }

    private static final String logTag = "Swipe";
    private static final int MIN_DISTANCE = 100;
    private float downX, downY, upX, upY;
    private Action mSwipeDetected = Action.None;

    public boolean swipeDetected() {
        return mSwipeDetected != Action.None;
    }

    public Action getAction() {
        return mSwipeDetected;
    }

    @Override
    public boolean onTouch(View v, MotionEvent event) {
        switch (event.getAction()) {
            case MotionEvent.ACTION_DOWN:
                downX = event.getX();
                downY = event.getY();
                mSwipeDetected = Action.None;
                return false;

            case MotionEvent.ACTION_MOVE:
                upX = event.getX();
                upY = event.getY();

                float deltaX = downX - upX;
                float deltaY = downY - upY;
                Log.i(logTag,String.valueOf(deltaX));
                Log.i(logTag,String.valueOf(deltaX));

                if (deltaY>0 && deltaY<10 && deltaX<0 || deltaY==0 && deltaX>-15 && deltaX<0){
                    Log.i(logTag,"to right");
                }if (deltaY>=0 && deltaY<10 && deltaX>0 || deltaY<0 && deltaX>15 && deltaX<40){
                Log.i(logTag,"to left");
            }





                if (Math.abs(deltaX) > MIN_DISTANCE) {
                    // left or right
                    if (deltaX < 0) {
                        mSwipeDetected = Action.LR;
                        return false;
                    }
                    if (deltaX > 0) {


                        mSwipeDetected = Action.RL;
                        return false;
                    }
                } else if (Math.abs(deltaY) > MIN_DISTANCE) {


                    if (deltaY < 0) {
                        Log.i(logTag,"to bottom");
                        mSwipeDetected = Action.TB;
                        return false;
                    }
                    if (deltaY > 0) {
                        Log.i(logTag,"to up");
                        mSwipeDetected = Action.BT;
                        return false;
                    }
                }
                return true;
        }
        return false;
    }
}

Finally on the object that you want to apply. My example:

SwipeDetector swipeDetector = new SwipeDetector();
listView.setOnTouchListener(swipeDetector);

Good luck .

You should look at the with binding, as well as controlsDescendantBindings http://knockoutjs.com/documentation/custom-bindings-controlling-descendant-bindings.html

SELECT CONVERT( VARCHAR(24), GETDATE(), 113)

UPDATE

PRINT (CONVERT( VARCHAR(24), GETDATE(), 121))

Although this is almost certainly not the OPs issue, you can also get Unable to establish SSL connection from wget if you're behind a proxy and don't have HTTP_PROXY and HTTPS_PROXY environment variables set correctly. Make sure to set HTTP_PROXY and HTTPS_PROXY to point to your proxy.

This is a common situation if you work for a large corporation.

SELECT       `column`,
             COUNT(`column`) AS `value_occurrence` 
    FROM     `my_table`
    GROUP BY `column`
    ORDER BY `value_occurrence` DESC
    LIMIT    1;

Replace column and my_table. Increase 1 if you want to see the N most common values of the column.

i have some problems with it, and fixed it my using another config variable

$cfg['Servers'][$i]['AllowNoPassword'] = true;
instead
$cfg['Servers'][$i]['AllowNoPasswordRoot'] = true;

may be it will helpfull ot someone

I know this is a bit old, but in case another beginner is going through this, I'll share some code that covers a bit more of the basic operations, here is another example that also includes the option to cancel the process and also report to the user the status of the process. I'm going to add on top of the code given by Alex Aza in the solution above

public Form1()
{
    InitializeComponent();

    backgroundWorker1.DoWork += backgroundWorker1_DoWork;
    backgroundWorker1.ProgressChanged += backgroundWorker1_ProgressChanged;
    backgroundWorker1.RunWorkerCompleted += backgroundWorker1_RunWorkerCompleted;  //Tell the user how the process went
    backgroundWorker1.WorkerReportsProgress = true;
    backgroundWorker1.WorkerSupportsCancellation = true; //Allow for the process to be cancelled
}

//Start Process
private void button1_Click(object sender, EventArgs e)
{
    backgroundWorker1.RunWorkerAsync();
}

//Cancel Process
private void button2_Click(object sender, EventArgs e)
{
    //Check if background worker is doing anything and send a cancellation if it is
    if (backgroundWorker1.IsBusy)
    {
        backgroundWorker1.CancelAsync();
    }

}

private void backgroundWorker1_DoWork(object sender, System.ComponentModel.DoWorkEventArgs e)
{
    for (int i = 0; i < 100; i++)
    {
        Thread.Sleep(1000);
        backgroundWorker1.ReportProgress(i);

        //Check if there is a request to cancel the process
        if (backgroundWorker1.CancellationPending)
        {
            e.Cancel = true;
            backgroundWorker1.ReportProgress(0);
            return;
        }
    }
    //If the process exits the loop, ensure that progress is set to 100%
    //Remember in the loop we set i < 100 so in theory the process will complete at 99%
    backgroundWorker1.ReportProgress(100);
}

private void backgroundWorker1_ProgressChanged(object sender, System.ComponentModel.ProgressChangedEventArgs e)
{
    progressBar1.Value = e.ProgressPercentage;
}

private void backgroundWorker1_RunWorkerCompleted(object sender, System.ComponentModel.RunWorkerCompletedEventArgs e)
{
    if (e.Cancelled)
    {
         lblStatus.Text = "Process was cancelled";
    }
    else if (e.Error != null)
    {
         lblStatus.Text = "There was an error running the process. The thread aborted";
    }
    else
    {
       lblStatus.Text = "Process was completed";
    }
}

I was looking for same thing but in number, means from integer xx hour, xx minutes and AM/PM to 24 hour format xx hour and xx minutes, so here what i have done:

private static final int AM = 0;
private static final int PM = 1;
/**
   * Based on concept: day start from 00:00AM and ends at 11:59PM, 
   * afternoon 12 is 12PM, 12:xxAM is basically 00:xxAM
   * @param hour12Format
   * @param amPm
   * @return
   */
  private int get24FormatHour(int hour12Format,int amPm){
    if(hour12Format==12 && amPm==AM){
      hour12Format=0;
    }
    if(amPm == PM && hour12Format!=12){
      hour12Format+=12;
    }
    return hour12Format;
  }`

    private int minutesTillMidnight(int hour12Format,int minutes, int amPm){
        int hour24Format=get24FormatHour(hour12Format,amPm);
        System.out.println("24 Format :"+hour24Format+":"+minutes); 
        return (hour24Format*60)+minutes;
      }

I solved "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver" on my ASUS laptop with GTX 950m and Ubuntu 18.04 by disabling Secure Boot Control from BIOS.

You can use the accept attribute along with the . It doesn't work in IE and Safari.

Depending on your project scale and extensibility, you could use Struts. Struts offers two ways to limit the uploaded file type, declaratively and programmatically.

For more information: http://struts.apache.org/2.0.14/docs/file-upload.html#FileUpload-FileTypes

I can recomend Ion library it use 3 dependences and you can find all three jar files at these two sites:
https://github.com/koush/ion#jars (ion and androidasync)

try {
   Ion.with(this, "http://www.urlthatyouwant.com/post/page")
   .setMultipartParameter("field1", "This is field number 1")
   .setMultipartParameter("field2", "Field 2 is shorter")
   .setMultipartFile("imagefile",
        new File(Environment.getExternalStorageDirectory()+"/testfile.jpg"))
   .asString()
   .setCallback(new FutureCallback<String>() {
        @Override
        public void onCompleted(Exception e, String result) {
             System.out.println(result);
        }});
   } catch(Exception e) {
     // Do something about exceptions
        System.out.println("exception: " + e);
   }

this will run async and the callback will be executed in the UI thread once a response is received I strongly recomned that you go to the https://github.com/koush/ion for futher information

The same way you declare any other variable, just use the bit type:

DECLARE @MyVar bit
Set @MyVar = 1  /* True */
Set @MyVar = 0  /* False */

SELECT * FROM [MyTable] WHERE MyBitColumn = @MyVar

In Xcode 7.1 onwards(swift 2.0)

this will subtract ten days of the current date (before Java 8):

int x = -10;
Calendar cal = GregorianCalendar.getInstance();
cal.add( Calendar.DAY_OF_YEAR, x);
Date tenDaysAgo = cal.getTime();

If you're using Java 8 you can make use of the new Date & Time API (http://www.oracle.com/technetwork/articles/java/jf14-date-time-2125367.html):

LocalDate tenDaysAgo = LocalDate.now().minusDays(10);

For converting the new to the old types and vice versa see: Converting between java.time.LocalDateTime and java.util.Date

Here is a little code. It works (for me) at any subsequent html code change of the WebBrowser control. You may adapt it to your specific needs.

    static public void SetWebBrowserHtml(WebBrowser Browser, string HtmlText)
    {
        if (Browser != null)
        {
            if (string.IsNullOrWhiteSpace(HtmlText))
            {
                // Putting a div inside body forces control to use div instead of P (paragraph)
                // when the user presses the enter button
                HtmlText = 
                        @"<html>
                    <head>
                    <meta http-equiv=""Content-Type"" content=""text/html; charset=UTF-8"" />
                    </head>
                      <div></div>
                    <body>
                    </body>
                    </html>";
            }

            if (Browser.Document == null)
            {
                Browser.Navigate("about:blank");

                //Wait for document to finish loading
                while (Browser.ReadyState != WebBrowserReadyState.Complete)
                {
                    Application.DoEvents();
                    System.Threading.Thread.Sleep(5);
                }
            }

            // Write html code
            dynamic Doc = Browser.Document.DomDocument;
            Doc.open();
            Doc.write(HtmlText);
            Doc.close();


            // Add scripts here 
            /*  
            dynamic Doc = Document.DomDocument;
            dynamic Script = Doc.getElementById("MyScriptFunctions");
            if (Script == null)
            {
                Script = Doc.createElement("script");
                Script.id = "MyScriptFunctions";
                Script.text = JavascriptFunctionsSourcecode;
                Doc.appendChild(Script);
            }                 
            */



            // Enable contentEditable   
            /*  
            if (Browser.Document.Body != null)
            {
                if (Browser.Version.Major >= 9)
                    Browser.Document.Body.SetAttribute("contentEditable", "true");
            }             
             */

            // Attach event handlers
            // Browser.Document.AttachEventHandler("onkeyup", BrowserKeyUp);
            // Browser.Document.AttachEventHandler("onkeypress", BrowserKeyPress);
            // etc...
        }
    }        

As of 2016 I used datetimepicker like this:

$(function () {
    $('#date_box').datetimepicker({
        format: 'YYYY-MM-DD hh:mm'
    });
});

Yes, but it's not a div, it's a fieldset

fieldset {
    border: 1px solid #000;
}

<fieldset>
  <legend>AAA</legend>
</fieldset>

You can use Array.Resize(), documented in MSDN.

But yeah, I agree with Corey, if you need a dynamically sized data structure, we have Lists for that.

Important: Array.Resize() doesn't resize the array (the method name is misleading), it creates a new array and only replaces the reference you passed to the method.

An example:

var array1 = new byte[10];
var array2 = array1;
Array.Resize<byte>(ref array1, 20);

// Now:
// array1.Length is 20
// array2.Length is 10
// Two different arrays.

another solution , you can add <br> tag to your table

    |Method name| Behavior |
    |--|--|
    | OnAwakeLogicController(); | Its called when MainLogicController is loaded into the memory , its also hold the following actions :- <br> 1. Checking Audio Settings <br>2. Initializing Level Controller|

I've just completed putting together a jQuery plugin that will take valid single table using valid HTML (have to have a thead and tbody) and will output a table that has fixed headers, optional fixed footer that can either be a cloned header or any content you chose (pagination, etc.). If you want to take advantage of larger monitors it will also resize the table when the browser is resized. Another added feature is being able to side scroll if the table columns can not all fit in view.

http://fixedheadertable.com/

on github: http://markmalek.github.com/Fixed-Header-Table/

It's extremely easy to setup and you can create your own custom styles for it. It also uses rounded corners in all browsers. Keep in mind I just released it, so it's still technically beta and there are very few minor issues I'm ironing out.

It works in Internet Explorer 7, Internet Explorer 8, Safari, Firefox and Chrome.

I think you are confused about how the compiler puts things together. When you use -c flag, i.e. no linking is done, the input is C++ code, and the output is object code. The .o files thus don't mix with -c, and compiler warns you about that. Symbols from object file are not moved to other object files like that.

All object files should be on the final linker invocation, which is not the case here, so linker (called via g++ front-end) complains about missing symbols.

Here's a small example (calling g++ explicitly for clarity):

PROG ?= myprog
OBJS = worker.o main.o

all: $(PROG)

.cpp.o:
        g++ -Wall -pedantic -ggdb -O2 -c -o $@ $<

$(PROG): $(OBJS)
        g++ -Wall -pedantic -ggdb -O2 -o $@ $(OBJS)

There's also makedepend utility that comes with X11 - helps a lot with source code dependencies. You might also want to look at the -M gcc option for building make rules.

For those folks who are using WebDriverJS Keys.RETURN would be referenced as

webdriver.Key.RETURN

A more complete example as a reference might be helpful too:

var pressEnterToSend = function () {
    var deferred = webdriver.promise.defer();
    webdriver.findElement(webdriver.By.id('id-of-input-element')).then(function (element) {
        element.sendKeys(webdriver.Key.RETURN);
        deferred.resolve();
    });

    return deferred.promise;
};

You are getting an HTTP 400 (Bad Request) error because there is a space in your URL. If you fix it (before the zoom parameter), you will get an HTTP 400 error (Unauthorized). Maybe you need some HTTP header to identify your download as a recognised browser (use the "User-Agent" header) or additional authentication parameter.

For the User-Agent example, then use the ImageIO.read(InputStream) using the connection inputstream:

URLConnection connection = url.openConnection();
connection.setRequestProperty("User-Agent", "xxxxxx");

Use whatever needed for xxxxxx

Large objects are allocated on LOH (large object heap), not on gen 0. If you're saying that they don't get garbage-collected with gen 0, you're right. I believe they are collected only when the full GC cycle (generations 0, 1 and 2) happens.

That being said, I believe on the other side GC will adjust and collect memory more aggressively when you work with large objects and the memory pressure is going up.

It is hard to say whether to collect or not and in which circumstances. I used to do GC.Collect() after disposing of dialog windows/forms with numerous controls etc. (because by the time the form and its controls end up in gen 2 due to creating many instances of business objects/loading much data - no large objects obviously), but actually didn't notice any positive or negative effects in the long term by doing so.

While saving the response of get request, same error was thrown on Python 3.7 on window 10. The response received from the URL, encoding was UTF-8 so it is always recommended to check the encoding so same can be passed to avoid such trivial issue as it really kills lots of time in production

import requests
resp = requests.get('https://en.wikipedia.org/wiki/NIFTY_50')
print(resp.encoding)
with open ('NiftyList.txt', 'w') as f:
    f.write(resp.text)

When I added encoding="utf-8" with the open command it saved the file with the correct response

with open ('NiftyList.txt', 'w', encoding="utf-8") as f:
    f.write(resp.text)

In my case (i want to add 3 years to current date) the solution was:

$future_date = date('Y-m-d', strtotime("now + 3 years"));

To Gardenee, Treby and Daniel Lima: what will happen with 29th February? Sometimes February has only 28 days :)

I think your code is a bit too complicated and it needs more structure, because otherwise you'll be lost in all equations and operations. In the end this regression boils down to four operations:

1. Calculate the hypothesis h = X * theta
2. Calculate the loss = h - y and maybe the squared cost (loss^2)/2m
3. Calculate the gradient = X' * loss / m
4. Update the parameters theta = theta - alpha * gradient

In your case, I guess you have confused m with n. Here m denotes the number of examples in your training set, not the number of features.

Let's have a look at my variation of your code:

import numpy as np
import random

# m denotes the number of examples here, not the number of features
def gradientDescent(x, y, theta, alpha, m, numIterations):
    xTrans = x.transpose()
    for i in range(0, numIterations):
        hypothesis = np.dot(x, theta)
        loss = hypothesis - y
        # avg cost per example (the 2 in 2*m doesn't really matter here.
        # But to be consistent with the gradient, I include it)
        cost = np.sum(loss ** 2) / (2 * m)
        print("Iteration %d | Cost: %f" % (i, cost))
        # avg gradient per example
        gradient = np.dot(xTrans, loss) / m
        # update
        theta = theta - alpha * gradient
    return theta


def genData(numPoints, bias, variance):
    x = np.zeros(shape=(numPoints, 2))
    y = np.zeros(shape=numPoints)
    # basically a straight line
    for i in range(0, numPoints):
        # bias feature
        x[i][0] = 1
        x[i][1] = i
        # our target variable
        y[i] = (i + bias) + random.uniform(0, 1) * variance
    return x, y

# gen 100 points with a bias of 25 and 10 variance as a bit of noise
x, y = genData(100, 25, 10)
m, n = np.shape(x)
numIterations= 100000
alpha = 0.0005
theta = np.ones(n)
theta = gradientDescent(x, y, theta, alpha, m, numIterations)
print(theta)

At first I create a small random dataset which should look like this:

As you can see I also added the generated regression line and formula that was calculated by excel.

You need to take care about the intuition of the regression using gradient descent. As you do a complete batch pass over your data X, you need to reduce the m-losses of every example to a single weight update. In this case, this is the average of the sum over the gradients, thus the division by m.

The next thing you need to take care about is to track the convergence and adjust the learning rate. For that matter you should always track your cost every iteration, maybe even plot it.

If you run my example, the theta returned will look like this:

Iteration 99997 | Cost: 47883.706462
Iteration 99998 | Cost: 47883.706462
Iteration 99999 | Cost: 47883.706462
[ 29.25567368   1.01108458]

Which is actually quite close to the equation that was calculated by excel (y = x + 30). Note that as we passed the bias into the first column, the first theta value denotes the bias weight.

From now onwards after API 24, Uri.parse(filePath) won't work. You need to use this

final File videoFile = new File("path to your video file");
Uri fileUri = FileProvider.getUriForFile(mContext, "{yourpackagename}.fileprovider", videoFile);
Intent intent = new Intent(Intent.ACTION_VIEW);
intent.setDataAndType(fileUri, "video/*");
intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION);//DO NOT FORGET THIS EVER
startActivity(intent);

But before using this you need to understand how file provider works. Go to official document link to understand file provider better.

It's easy, use a solid shadow with 0 offset:

#foo {
  border-radius: 1px;
  box-shadow: 0px 0px 0px 8px rgba(0,0,0,0.3);       
}

Also, if you set a border-radius to the element, it gives you pretty rounded borders

jsFiddle Demo

/sys/sim/source/gm/kg/jl/ls/owow/lsal
/sys/sim/source/gm/kg/jl/ls/owow/lsal
/sys/sim/source/gm/kg/jl/ls/owow/lsal
/sys/sim/source/gm/kg/jl/ls/owow/lsal
/sys/sim/source/gm/kg/jl/ls/owow/lsal
/sys/sim/source/gm/kg/jl/ls/owow/lsal
/sys/sim/source/gm/kg/jl/ls/owow/lsal
/sys/sim/source/gm/kg/jl/ls/owow/lsal

Suppose if you want to replace the above with some other info.

COMMAND(:%s/\/sys\/sim\/source\/gm\/kg\/jl\/ls\/owow\/lsal/sys.pkg.mpu.umc.kdk./g)

In this the above will be get replaced with (sys.pkg.mpu.umc.kdk.) .

The below code worked for me instead of the previous one - try it out !

df['DOB']=pd.to_datetime(df['DOB'].astype(str), format='%m/%d/%Y')

txt = txt.Trim();

To check if LocalDb is installed or not:

• run cmd and type in sqllocaldb i this should give you the installed sqllocaldb instances if found.
• Run SSMS (SQL Server Management Studio).
• Try to connect to this instance (localdb)\V11.0 using windows authentication.

If an error is raised Cannot connect to (localdb)\V11.0. change the instance name to (localdb)\MSSQLLocalDB and try again to connect, if you still get the same error.

Follow these steps to install LocalDb:

• Close SSMS.
• Close VS (Visual Studio) if it's running.
• Go to Start Menu and type in search sqlLocalDb.
• From the results that appears choose sqlLocalDb.msi and click it.
• SQL setup will start to install LocalDB

after finishing the installation re-run SSMS and try connecting to either of the instances (localdb)\V11.0 or (localdb)\MSSQLLocalDB, one of it should work depending on what Visual Studio version you have.

You can also verify that localdb is installed using Visual Studio by simply creating new sql file and go to the connect icon on the top header of the file which by default lists all the servers you can connect to including localdb if installed.

In addition to the above mentioned ways of finding if localdb is installed, you can also use the MS windows power shell or windows command processor CMD or even NuGet package manager console on your server machine and run these commands sqllocaldb i and sqllocaldb v that will show you the localdb name if it is installed and the MSSQL server version installed and running on your machine.

I did a benchmark based on several answers in the question and the following snippet is believed to be the best choice:

def dot_product2(v1, v2):
    return sum(map(operator.mul, v1, v2))


def vector_cos5(v1, v2):
    prod = dot_product2(v1, v2)
    len1 = math.sqrt(dot_product2(v1, v1))
    len2 = math.sqrt(dot_product2(v2, v2))
    return prod / (len1 * len2)

The result makes me surprised that the implementation based on scipy is not the fastest one. I profiled and find that cosine in scipy takes a lot of time to cast a vector from python list to numpy array.

Use StreamReader and direct it to detect the encoding for you:

using (var reader = new System.IO.StreamReader(path, true))
{
    var currentEncoding = reader.CurrentEncoding;
}

And use Code Page Identifiers https://msdn.microsoft.com/en-us/library/windows/desktop/dd317756(v=vs.85).aspx in order to switch logic depending on it.

If you have a text box to type the file path, just use sendkeys to input the file path and click on submit button. If there is no text box to type the file path and only able to click on browse button and to select the file from windows popup, you can use AutoIt tool, see the step below to use AutoIt for the same,

1. Download and Install Autoit tool from http://www.autoitscript.com/site/autoit/

2. Open Programs -> Autoit tool -> SciTE Script Editor.

3. Paste the following code in Autoit editor and save it as “filename.exe “(eg: new.exe)

   Then compile and build the file to make it exe. (Tools ? Compile)

Autoit Code:

WinWaitActive("File Upload"); Name of the file upload window (Windows Popup Name: File Upload)    
Send("logo.jpg"); File name    
Send("{ENTER}")

Then Compile and Build from Tools menu of the Autoit tool -> SciTE Script Editor.

Paste the below Java code in Eclipse editor and save

Java Code:

driver.findElement(By.id("uploadbutton")).click; // open the Upload window using selenium    
Thread.sleep("20000"); // wait for page load    
Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + "C:\\Documents and Settings\\new.exe"); // Give  path where the exe is saved.

Mongodb v3.4

You need to do the following to create a secure database:

Make sure the user starting the process has permissions and that the directories exist (/data/db in this case).

1) Start MongoDB without access control.

mongod --port 27017 --dbpath /data/db

2) Connect to the instance.

mongo --port 27017

3) Create the user administrator (in the admin authentication database).

use admin
db.createUser(
  {
    user: "myUserAdmin",
    pwd: "abc123",
    roles: [ { role: "userAdminAnyDatabase", db: "admin" } ]
  }
)

4) Re-start the MongoDB instance with access control.

mongod --auth --port 27017 --dbpath /data/db

5) Connect and authenticate as the user administrator.

mongo --port 27017 -u "myUserAdmin" -p "abc123" --authenticationDatabase "admin"

6) Create additional users as needed for your deployment (e.g. in the test authentication database).

use test
db.createUser(
  {
    user: "myTester",
    pwd: "xyz123",
    roles: [ { role: "readWrite", db: "test" },
             { role: "read", db: "reporting" } ]
  }
)

7) Connect and authenticate as myTester.

mongo --port 27017 -u "myTester" -p "xyz123" --authenticationDatabase "test"

I basically just explained the short version of the official docs here: https://docs.mongodb.com/master/tutorial/enable-authentication/

I found this thread while trying to carry out a similar task. In the end, I used

Range("F:F").SpecialCells(xlBlanks).Areas(1)(1).Select

Which works fine as long as there is a blank cell in the intersection of the specified range and the used range of the worksheet.

The areas property is not needed to find the absolute first blank in the range, but is useful for finding subsequent non consecutive blanks.

Using the ternary operator is possible like following.[disabled] internally required true or false for its operation.

<button type="button" 
  [disabled]="(testVariable1 != 0 || testVariable2!=0)? true:false"
  mat-button>Button</button>

You're correct, in that example the throws is superfluous. It's possible that it was left there from some previous implementation - perhaps the exception was originally thrown instead of caught in the catch block.

The error you quote has nothing to do with pg_hba.conf; it's failing to connect, not failing to authorize the connection.

Do what the error message says:

Check that the hostname and port are correct and that the postmaster is accepting TCP/IP connections

You haven't shown the command that produces the error. Assuming you're connecting on localhost port 5432 (the defaults for a standard PostgreSQL install), then either:

• PostgreSQL isn't running

• PostgreSQL isn't listening for TCP/IP connections (listen_addresses in postgresql.conf)

• PostgreSQL is only listening on IPv4 (0.0.0.0 or 127.0.0.1) and you're connecting on IPv6 (::1) or vice versa. This seems to be an issue on some older Mac OS X versions that have weird IPv6 socket behaviour, and on some older Windows versions.

• PostgreSQL is listening on a different port to the one you're connecting on

• (unlikely) there's an iptables rule blocking loopback connections

(If you are not connecting on localhost, it may also be a network firewall that's blocking TCP/IP connections, but I'm guessing you're using the defaults since you didn't say).

So ... check those:

• ps -f -u postgres should list postgres processes

• sudo lsof -n -u postgres |grep LISTEN or sudo netstat -ltnp | grep postgres should show the TCP/IP addresses and ports PostgreSQL is listening on

BTW, I think you must be on an old version. On my 9.3 install, the error is rather more detailed:

$ psql -h localhost -p 12345
psql: could not connect to server: Connection refused
        Is the server running on host "localhost" (::1) and accepting
        TCP/IP connections on port 12345?

The most common answer to this problem is to go to the Data menu and choose Show Data Sources. This option does not appear for me.

The Show Report Data Pane keyboard shortcut did work for me: CTRL+ALT+D. There is nothing in the menus that I could find that does this same thing.

You have not defined a method around your code.

import java.io.*;

public class details
{
    public static void main( String[] args )
    {
        BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
        System.out.println("What is your name?");
        String name = in.readLine(); ;
        System.out.println("Hello " + name);
    }
}

In this case, I have assumed that you want your code to be executed in the main method of the class. It is, of course, possible that this code goes in any other method.

LoadLibrary does not do what you think it does. It loads the DLL into the memory of the current process, but it does not magically import functions defined in it! This wouldn't be possible, as function calls are resolved by the linker at compile time while LoadLibrary is called at runtime (remember that C++ is a statically typed language).

You need a separate WinAPI function to get the address of dynamically loaded functions: GetProcAddress.

Example

#include <windows.h>
#include <iostream>

/* Define a function pointer for our imported
 * function.
 * This reads as "introduce the new type f_funci as the type: 
 *                pointer to a function returning an int and 
 *                taking no arguments.
 *
 * Make sure to use matching calling convention (__cdecl, __stdcall, ...)
 * with the exported function. __stdcall is the convention used by the WinAPI
 */
typedef int (__stdcall *f_funci)();

int main()
{
  HINSTANCE hGetProcIDDLL = LoadLibrary("C:\\Documents and Settings\\User\\Desktop\\test.dll");

  if (!hGetProcIDDLL) {
    std::cout << "could not load the dynamic library" << std::endl;
    return EXIT_FAILURE;
  }

  // resolve function address here
  f_funci funci = (f_funci)GetProcAddress(hGetProcIDDLL, "funci");
  if (!funci) {
    std::cout << "could not locate the function" << std::endl;
    return EXIT_FAILURE;
  }

  std::cout << "funci() returned " << funci() << std::endl;

  return EXIT_SUCCESS;
}

Also, you should export your function from the DLL correctly. This can be done like this:

int __declspec(dllexport) __stdcall funci() {
   // ...
}

As Lundin notes, it's good practice to free the handle to the library if you don't need them it longer. This will cause it to get unloaded if no other process still holds a handle to the same DLL.

I offen manage css/js plugin with composer which install it under vendor. I symlink those to the web/bundles directory, that's let composer update bundles as needed.

exemple:

1 - symlink once at all (use command fromweb/bundles/

ln -sf vendor/select2/select2/dist/ select2

2 - use asset where needed, in twig template :

{{ asset('bundles/select2/css/fileinput.css) }}

Regards.

just hoping to be helpful to someone as old problems seem to come back every now and again and I always find good tips here.

My problem was to list in a text file all the names of the "*.txt" files in a certain directory without path and without extension from a Datastage 7.5 sequence.

The solution we used is:

ls /home/user/new/*.txt | xargs -n 1 basename | cut -d '.' -f1 > name_list.txt

I had similar problem, then I tried writing this from JavaScript and it works! : referenceToYourInputFile.value = "" ;

If you want to enable unblur, you cannot just add the blur CSS to the body, you need to blur each visible child one level directly under the body and then remove the CSS to unblur. The reason is because of the "Cascade" in CSS, you cannot undo the cascading of the CSS blur effect for a child of the body. Also, to blur the body's background image you need to use the pseudo element :before

//HTML

<div id="fullscreen-popup" style="position:absolute;top:50%;left:50%;">
    <div class="morph-button morph-button-overlay morph-button-fixed">
        <button id="user-interface" type="button">MORE INFO</button>
        <!--a id="user-interface" href="javascript:void(0)">popup</a-->
        <div class="morph-content">
            <div>
                <div class="content-style-overlay">
                    <span class="icon icon-close">Close the overlay</span>
                    <h2>About Parsley</h2>
                    <p>Gumbo beet greens corn soko endive gumbo gourd. Parsley shallot courgette tatsoi pea sprouts fava bean collard greens dandelion okra wakame tomato. Dandelion cucumber earthnut pea peanut soko zucchini.</p>
                    <p>Turnip greens yarrow ricebean rutabaga endive cauliflower sea lettuce kohlrabi amaranth water spinach avocado daikon napa cabbage asparagus winter purslane kale. Celery potato scallion desert raisin horseradish spinach carrot soko. Lotus root water spinach fennel kombu maize bamboo shoot green bean swiss chard seakale pumpkin onion chickpea gram corn pea. Brussels sprout coriander water chestnut gourd swiss chard wakame kohlrabi beetroot carrot watercress. Corn amaranth salsify bunya nuts nori azuki bean chickweed potato bell pepper artichoke.</p>
                    <p>Gumbo beet greens corn soko endive gumbo gourd. Parsley shallot courgette tatsoi pea sprouts fava bean collard greens dandelion okra wakame tomato. Dandelion cucumber earthnut pea peanut soko zucchini.</p>
                    <p>Turnip greens yarrow ricebean rutabaga endive cauliflower sea lettuce kohlrabi amaranth water spinach avocado daikon napa cabbage asparagus winter purslane kale. Celery potato scallion desert raisin horseradish spinach carrot soko. Lotus root water spinach fennel kombu maize bamboo shoot green bean swiss chard seakale pumpkin onion chickpea gram corn pea. Brussels sprout coriander water chestnut gourd swiss chard wakame kohlrabi beetroot carrot watercress. Corn amaranth salsify bunya nuts nori azuki bean chickweed potato bell pepper artichoke.</p>
                    <p>Gumbo beet greens corn soko endive gumbo gourd. Parsley shallot courgette tatsoi pea sprouts fava bean collard greens dandelion okra wakame tomato. Dandelion cucumber earthnut pea peanut soko zucchini.</p>
                    <p>Turnip greens yarrow ricebean rutabaga endive cauliflower sea lettuce kohlrabi amaranth water spinach avocado daikon napa cabbage asparagus winter purslane kale. Celery potato scallion desert raisin horseradish spinach carrot soko. Lotus root water spinach fennel kombu maize bamboo shoot green bean swiss chard seakale pumpkin onion chickpea gram corn pea. Brussels sprout coriander water chestnut gourd swiss chard wakame kohlrabi beetroot carrot watercress. Corn amaranth salsify bunya nuts nori azuki bean chickweed potato bell pepper artichoke.</p>
                </div>
            </div>
        </div>
    </div>
</div>

//CSS

/* Blur - doesn't work on IE */

.blur-on, .blur-element {
    -webkit-filter: blur(10px);
    -moz-filter: blur(10px);
    -o-filter: blur(10px);
    -ms-filter: blur(10px);
    filter: blur(10px);

    -webkit-transition: all 5s linear;
    transition        : all 5s linear;
    -moz-transition   : all 5s linear;
    -webkit-transition: all 5s linear;
    -o-transition     : all 5s linear;
}
.blur-off {
    -webkit-filter: blur(0px) !important;
    -moz-filter   : blur(0px) !important;
    -o-filter     : blur(0px) !important;
    -ms-filter    : blur(0px) !important;
    filter        : blur(0px) !important;
}
.blur-bgimage:before {
    content: "";
    position: absolute;
    height: 20%; width: 20%;
    background-size: cover;
    background: inherit;
    z-index: -1;

    transform: scale(5);
    transform-origin: top left;
    filter: blur(2px);       
    -moz-transform: scale(5);
    -moz-transform-origin: top left;
    -moz-filter: blur(2px);       
    -webkit-transform: scale(5);
    -webkit-transform-origin: top left;
    -webkit-filter: blur(2px);
    -o-transform: scale(5);
    -o-transform-origin: top left;
    -o-filter: blur(2px);       

    transition        : all 5s linear;
    -moz-transition   : all 5s linear;
    -webkit-transition: all 5s linear;
    -o-transition     : all 5s linear;
}


//Javascript

function blurBehindPopup() {
    if(blurredElements.length == 0) {
        for(var i=0; i < document.body.children.length; i++) {
            var element = document.body.children[i];
            if(element.id && element.id != 'fullscreen-popup' && element.isVisible == true) {
                classie.addClass( element, 'blur-element' );
                blurredElements.push(element);
            }
        }
    } else {
        for(var i=0; i < blurredElements.length; i++) {
            classie.addClass( blurredElements[i], 'blur-element' );
        }
    }
}
function unblurBehindPopup() {
    for(var i=0; i < blurredElements.length; i++) {
        classie.removeClass( blurredElements[i], 'blur-element' );
    }
}

Full Working Example Link

Another approach is to use the first_value window function: http://sqlfiddle.com/#!12/7a145/14

SELECT DISTINCT
  first_value("id") OVER (PARTITION BY "category" ORDER BY "date" DESC) 
FROM Table1
ORDER BY 1;

... though I suspect hims056's suggestion will typically perform better where appropriate indexes are present.

A third solution is:

SELECT
  id
FROM (
  SELECT
    id,
    row_number() OVER (PARTITION BY "category" ORDER BY "date" DESC) AS rownum
  FROM Table1
) x
WHERE rownum = 1;

You can find a whole bunch of Linq examples in visual studio. Just select Help -> Samples, and then unzip the Linq samples.

Open the linq samples solution and open the LinqSamples.cs of the SampleQueries project.

The answer you are looking for is in method Linq14:

int[] numbersA = { 0, 2, 4, 5, 6, 8, 9 };
int[] numbersB = { 1, 3, 5, 7, 8 };

var pairs =
   from a in numbersA
   from b in numbersB
   where a < b
   select new {a, b};

when you need in a timestamp in seconds, you can use the following:

var timestamp = (int)(DateTime.Now.ToUniversalTime() - new DateTime(1970, 1, 1)).TotalSeconds;

I found "display:flex" style is a good way to make these elements in same line. No matter what kind of element in the div. Especially if the input class is form-control,other solutions like bootstrap, inline-block will not work well.

Example:

<div style="display:flex; flex-direction: row; justify-content: center; align-items: center">
    <label for="Student">Name:</label>
    <input name="Student" />
</div>

More detail about display:flex:

flex-direction: row, column

justify-content: flex-end, center, space-between, space-around

align-items: stretch, flex-start, flex-end, center

If the data is coming from a database, as in my case, you can lower it before sending it to a select list/drop down list. Shame you can't do it in CSS.

It's not exactly an operator, rather a keyword. And no, it doesn't do any runtime-magic.

I've made an implementation of this feature in swift here: https://github.com/anatoliyv/SMIconLabel

Code is as simple as it's possible:

var labelLeft = SMIconLabel(frame: CGRectMake(10, 10, view.frame.size.width - 20, 20))
labelLeft.text = "Icon on the left, text on the left"

// Here is the magic
labelLeft.icon = UIImage(named: "Bell") // Set icon image
labelLeft.iconPadding = 5               // Set padding between icon and label
labelLeft.numberOfLines = 0             // Required
labelLeft.iconPosition = SMIconLabelPosition.Left // Icon position
view.addSubview(labelLeft)

Here is how it looks:

Join-Path is not exactly what you are looking for. It has multiple uses but not the one you are looking for. An example from Partying with Join-Path:

Join-Path C:\hello,d:\goodbye,e:\hola,f:\adios world
C:\hello\world
d:\goodbye\world
e:\hola\world
f:\adios\world

You see that it accepts an array of strings, and it concatenates the child string to each creating full paths. In your example, $path = join-path C: "Program Files" "Microsoft Office". You are getting the error since you are passing three positional arguments and join-path only accepts two. What you are looking for is a -join, and I could see this being a misunderstanding. Consider instead this with your example:

"C:","Program Files","Microsoft Office" -join "\"

-Join takes the array of items and concatenates them with \ into a single string.

C:\Program Files\Microsoft Office

Minor attempt at a salvage

Yes, I will agree that this answer is better, but mine could still work. Comments suggest there could be an issue with slashes, so to keep with my concatenation approach you could do this as well.

"C:","\\Program Files\","Microsoft Office\" -join "\" -replace "(?!^\\)\\{2,}","\"

So if there are issues with extra slashes it could be handled as long as they are not in the beginning of the string (allows UNC paths). [io.path]::combine('c:\', 'foo', '\bar\') would not work as expected and mine would account for that. Both require proper strings for input as you cannot account for all scenarios. Consider both approaches, but, yes, the other higher-rated answer is more terse, and I didn't even know it existed.

Also, would like to point out, my answer explains how what the OP doing was wrong on top of providing a suggestion to address the core problem.

Try using the ArrayIntList from the apache framework. It works exactly like an arraylist, except it can hold primitive int.

More details here -

https://commons.apache.org/dormant/commons-primitives/apidocs/org/apache/commons/collections/primitives/ArrayIntList.html

There are Linq extension methods for DataTable.

Add reference to: System.Data.DataSetExtensions.dll

Then include the namespace: using System.Data.DataSetExtensions

Finally you can use Linq extensions on DataSet and DataTables:

var matches = myDataSet.Tables.First().Where(dr=>dr.Field<int>("id") == 1);

On .Net 2.0 you can still add generic method:

public static List<T> ConvertRowsToList<T>( DataTable input, Convert<DataRow, T> conversion) {
    List<T> retval = new List<T>()
    foreach(DataRow dr in input.Rows)
        retval.Add( conversion(dr) );

    return retval;
}

If you are using a simulator in Android Studio on Mac you can go to View -> Tool Windows -> Device File Explorer. Here you can use a finder-like structure.

You could use preg_split instead of explode and split on [ ]+ (one or more spaces). But I think in this case you could go with preg_match_all and capturing:

preg_match_all('/[ ]php[ ]+\S+[ ]+(\S+)/', $input, $matches);
$result = $matches[1];

The pattern matches a space, php, more spaces, a string of non-spaces (the path), more spaces, and then captures the next string of non-spaces. The first space is mostly to ensure that you don't match php as part of a user name but really only as a command.

An alternative to capturing is the "keep" feature of PCRE. If you use \K in the pattern, everything before it is discarded in the match:

preg_match_all('/[ ]php[ ]+\S+[ ]+\K\S+/', $input, $matches);
$result = $matches[0];

I would use preg_match(). I do something similar for many of my system management scripts. Here is an example:

$test = "user     12052  0.2  0.1 137184 13056 ?        Ss   10:00   0:00 php /home/user/public_html/utilities/runProcFile.php cust1 cron
user     12054  0.2  0.1 137184 13064 ?        Ss   10:00   0:00 php /home/user/public_html/utilities/runProcFile.php cust3 cron
user     12055  0.6  0.1 137844 14220 ?        Ss   10:00   0:00 php /home/user/public_html/utilities/runProcFile.php cust4 cron
user     12057  0.2  0.1 137184 13052 ?        Ss   10:00   0:00 php /home/user/public_html/utilities/runProcFile.php cust89 cron
user     12058  0.2  0.1 137184 13052 ?        Ss   10:00   0:00 php /home/user/public_html/utilities/runProcFile.php cust435 cron
user     12059  0.3  0.1 135112 13000 ?        Ss   10:00   0:00 php /home/user/public_html/utilities/runProcFile.php cust16 cron
root     12068  0.0  0.0 106088  1164 pts/1    S+   10:00   0:00 sh -c ps aux | grep utilities > /home/user/public_html/logs/dashboard/currentlyPosting.txt
root     12070  0.0  0.0 103240   828 pts/1    R+   10:00   0:00 grep utilities";

$lines = explode("\n", $test);

foreach($lines as $line){
        if(preg_match("/.php[\s+](cust[\d]+)[\s+]cron/i", $line, $matches)){
                print_r($matches);
        }

}

The above prints:

Array
(
    [0] => .php cust1 cron
    [1] => cust1
)
Array
(
    [0] => .php cust3 cron
    [1] => cust3
)
Array
(
    [0] => .php cust4 cron
    [1] => cust4
)
Array
(
    [0] => .php cust89 cron
    [1] => cust89
)
Array
(
    [0] => .php cust435 cron
    [1] => cust435
)
Array
(
    [0] => .php cust16 cron
    [1] => cust16
)

You can set $test to equal the output from exec. the values you are looking for would be in the if statement under the foreach. $matches[1] will have the custx value.

you need to parse your xml with jquery json parse...i.e

  var parsed_json = $.parseJSON(xml);

Some mentioned SPSS, StatTransfer, they are not free. R and Python (also mentioned above) may be your choice. But personally, I would like to recommend Python, the syntax is much more intuitive than R. You can just use several command lines with Pandas in Python to read and export most of the commonly used data formats:

import pandas as pd

df = pd.read_stata('YourDataName.dta')

df.to_csv('YourDataName.csv')

jsonText = $_REQUEST['myJSON'];

$decodedText = html_entity_decode($jsonText);

$myArray = json_decode($decodedText, true);`

This solved for me,

$old = '18-04-2018';
$new = date('Y-m-d', strtotime($old));
echo $new;

Output : 2018-04-18

Add Content-Type: application/json and Accept: application/json

I found this worked best for me.

In AndroidManifest.xml <activity> element add android:windowSoftInputMode="stateHidden"

This always hides the keyboard when entering the activity.

You can structurize your batch file by using goto

IF EXIST somefile.txt goto somefileexists
goto exit

:somefileexists
IF EXIST someotherfile.txt SET var=...

:exit

This is in response to the above post by Efx:

If the URL already contains the var you want to change, then it is added yet again as a hidden field.

Here is a modification of that code as to prevent duplicating vars in the URL:

foreach ($_GET as $key => $value) {
    if ($key != "my_key") {
        echo("<input type='hidden' name='$key' value='$value'/>");
    }
}

You could use an onclick event handler in order to get the input value for the text field. Make sure you give the field an unique id attribute so you can refer to it safely through document.getElementById():

If you want to dynamically add elements, you should have a container where to place them. For instance, a <div id="container">. Create new elements by means of document.createElement(), and use appendChild() to append each of them to the container. You might be interested in outputting a meaningful name attribute (e.g. name="member"+i for each of the dynamically generated <input>s if they are to be submitted in a form.

Notice you could also create <br/> elements with document.createElement('br'). If you want to just output some text, you can use document.createTextNode() instead.

Also, if you want to clear the container every time it is about to be populated, you could use hasChildNodes() and removeChild() together.

<html>
<head>
    <script type='text/javascript'>
        function addFields(){
            // Number of inputs to create
            var number = document.getElementById("member").value;
            // Container <div> where dynamic content will be placed
            var container = document.getElementById("container");
            // Clear previous contents of the container
            while (container.hasChildNodes()) {
                container.removeChild(container.lastChild);
            }
            for (i=0;i<number;i++){
                // Append a node with a random text
                container.appendChild(document.createTextNode("Member " + (i+1)));
                // Create an <input> element, set its type and name attributes
                var input = document.createElement("input");
                input.type = "text";
                input.name = "member" + i;
                container.appendChild(input);
                // Append a line break 
                container.appendChild(document.createElement("br"));
            }
        }
    </script>
</head>
<body>
    <input type="text" id="member" name="member" value="">Number of members: (max. 10)<br />
    <a href="#" id="filldetails" onclick="addFields()">Fill Details</a>
    <div id="container"/>
</body>
</html>

See a working sample in this JSFiddle.

You can do it for arbitrary refs. This is how to move a branch pointer:

git update-ref -m "reset: Reset <branch> to <new commit>" refs/heads/<branch> <commit>

where -m adds a message to the reflog for the branch.

The general form is

git update-ref -m "reset: Reset <branch> to <new commit>" <ref> <commit>

You can pick nits about the reflog message if you like - I believe the branch -f one is different from the reset --hard one, and this isn't exactly either of them.

Using find with bind to pass specific key values to a callback function.

   function byValue(o) { 
       return o.a === this.a && o.b === this.b; 
   };   

   var result = jsObjects.find(byValue.bind({ a: 5, b: 6 }));

Editor's note: this is a very dangerous approach, if you are using a version of PHP old enough to use it. It opens your code to man-in-the-middle attacks and removes one of the primary purposes of an encrypted connection. The ability to do this has been removed from modern versions of PHP because it is so dangerous. The only reason this has been upvoted 70 time is because people are lazy. DO NOT DO THIS.

I know it's a (very) old question and it's about command line, but when I searched Google for "SSL: no alternative certificate subject name matches target host name", this was the first hit.

It took me a good while to figure out the answer so hope this saves someone a lot of time! In PHP add this to your cUrl setopts:

curl_setopt($curl, CURLOPT_SSL_VERIFYHOST, FALSE);
curl_setopt($curl, CURLOPT_SSL_VERIFYPEER, FALSE);

p.s: this should be a temporary solution. Since this is a certificate error, best thing is to have the certificate fixed ofcourse!

If you use androidx.appcompat:appcompat and want a custom drawable (of type selector with android:state_checked) to work on old platform versions in addition to new platform versions, you need to use

    <CheckBox
        app:buttonCompat="@drawable/..."

instead of

    <CheckBox
        android:button="@drawable/..."

You are almost there :)

All that is left is to

git checkout featurex
git merge our-team

This will merge our-team into featurex.

The above assumes you have already committed/stashed your changes in featurex, if that is not the case you will need to do this first.

Here's a nice answer from the FAQ on the scipy.org website:

What advantages do NumPy arrays offer over (nested) Python lists?

Python’s lists are efficient general-purpose containers. They support (fairly) efficient insertion, deletion, appending, and concatenation, and Python’s list comprehensions make them easy to construct and manipulate. However, they have certain limitations: they don’t support “vectorized” operations like elementwise addition and multiplication, and the fact that they can contain objects of differing types mean that Python must store type information for every element, and must execute type dispatching code when operating on each element. This also means that very few list operations can be carried out by efficient C loops – each iteration would require type checks and other Python API bookkeeping.

function imageUpload(){
            if ($this->input->post('submitImg') && !empty($_FILES['files']['name'])) {
                $filesCount = count($_FILES['files']['name']);
                $userID = $this->session->userdata('userID');
                $this->load->library('upload');

                $config['upload_path'] = './userdp/';
                $config['allowed_types'] = 'jpg|png|jpeg';
                $config['max_size'] = '9184928';
                $config['max_width']  = '5000';
                $config['max_height']  = '5000';

                $files = $_FILES;
                $cpt = count($_FILES['files']['name']);

                for($i = 0 ; $i < $cpt ; $i++){
                    $_FILES['files']['name']= $files['files']['name'][$i];
                    $_FILES['files']['type']= $files['files']['type'][$i];
                    $_FILES['files']['tmp_name']= $files['files']['tmp_name'][$i];
                    $_FILES['files']['error']= $files['files']['error'][$i];
                    $_FILES['files']['size']= $files['files']['size'][$i];    

                    $imageName = 'image_'.$userID.'_'.rand().'.png';

                    $config['file_name'] = $imageName;

                    $this->upload->initialize($config);
                    if($this->upload->do_upload('files')){
                        $fileData = $this->upload->data(); //it return
                        $uploadData[$i]['picturePath'] = $fileData['file_name'];
                    }
                }

                if (!empty($uploadData)) {
                    $imgInsert = $this->insert_model->insertImg($uploadData);
                    $statusMsg = $imgInsert?'Files uploaded successfully.':'Some problem occurred, please try again.';
                    $this->session->set_flashdata('statusMsg',$statusMsg);
                    redirect('home/user_dash');
                }
            }
            else{
                redirect('home/user_dash');
            }
        }

To install TypeScript local in project as a development dependency you can use --save-dev key

npm install --save-dev typescript

It's also writes the typescript into your package.json

You also need to have a tsconfig.json file. For example

{
  "compilerOptions": {
    "target": "ES5",
    "module": "system",
    "moduleResolution": "node",
    "sourceMap": true,
    "emitDecoratorMetadata": true,
    "experimentalDecorators": true,
    "removeComments": false,
    "noImplicitAny": false
  },
  "exclude": [
    "node_modules",
    ".npm"
  ]
}

For more information about the tsconfig you can see here http://www.typescriptlang.org/docs/handbook/tsconfig-json.html

It is time to use agg instead of apply .

When

df = pd.DataFrame( {'a':['A','A','B','B','B','C'], 'b':[1,2,5,5,4,6], 'c': [1,2,5,5,4,6]})

If you want multiple columns stack into list , result in pd.DataFrame

df.groupby('a')[['b', 'c']].agg(list)
# or 
df.groupby('a').agg(list)

If you want single column in list, result in ps.Series

df.groupby('a')['b'].agg(list)
#or
df.groupby('a')['b'].apply(list)

Note, result in pd.DataFrame is about 10x slower than result in ps.Series when you only aggregate single column, use it in multicolumns case .

AFAIK, there is no a interactive option for output to file, there is a previous SO question related with this: Printing mongodb shell output to File

However, you can log all the shell session if you invoked the shell with tee command:

$ mongo | tee file.txt
MongoDB shell version: 2.4.2
connecting to: test
> printjson({this: 'is a test'})
{ "this" : "is a test" }
> printjson({this: 'is another test'})
{ "this" : "is another test" }
> exit
bye

Then you'll get a file with this content:

MongoDB shell version: 2.4.2
connecting to: test
> printjson({this: 'is a test'})
{ "this" : "is a test" }
> printjson({this: 'is another test'})
{ "this" : "is another test" }
> exit
bye

To remove all the commands and keep only the json output, you can use a command similar to:

tail -n +3 file.txt | egrep -v "^>|^bye" > output.json

Then you'll get:

{ "this" : "is a test" }
{ "this" : "is another test" }

Keep things simple :)

var my_form_obj = {};
my_form_obj.name = "Captain America";
my_form_obj.weapon = "Shield";

Hope this helps!

Best option is to disable sorting and just feed data with desired sort order (from database or other source). Try to add this to your 'datatable': "bSort": false

WARNING: Using Access-Control-Allow-Origin: * can make your API/website vulnerable to cross-site request forgery (CSRF) attacks. Make certain you understand the risks before using this code.

It's very simple to solve if you are using PHP. Just add the following script in the beginning of your PHP page which handles the request:

<?php header('Access-Control-Allow-Origin: *'); ?>

If you are using Node-red you have to allow CORS in the node-red/settings.js file by un-commenting the following lines:

// The following property can be used to configure cross-origin resource sharing
// in the HTTP nodes.
// See https://github.com/troygoode/node-cors#configuration-options for
// details on its contents. The following is a basic permissive set of options:
httpNodeCors: {
 origin: "*",
 methods: "GET,PUT,POST,DELETE"
},

If you are using Flask same as the question; you have first to install flask-cors

$ pip install -U flask-cors

Then include the Flask cors in your application.

from flask_cors import CORS

A simple application will look like:

from flask import Flask
from flask_cors import CORS

app = Flask(__name__)
CORS(app)

@app.route("/")
def helloWorld():
  return "Hello, cross-origin-world!"

For more details, you can check the Flask documentation.

So after a number of tries, I found it working.

Please follow the order sequence it's very important else it won't work

axios.delete(URL, {
  headers: {
    Authorization: authorizationToken
  },
  data: {
    source: source
  }
});

This worked me for UNICODE (UTF8) sentences too:

function myUTF8truncate($string, $width){
    if (mb_str_word_count($string) > $width) {
        $string= preg_replace('/((\w+\W*|| [\p{L}]+\W*){'.($width-1).'}(\w+))(.*)/', '${1}', $string);
    }
    return $string;
}

If you're using CSVWriter. Check that you don't have the option

.withQuotechar(CSVWriter.NO_QUOTE_CHARACTER)

When I removed it the comma was showing as expected and not treating it as new column

iTunes 12.7 ( Xcode needed )

You cannot install a release ipa directly on your device. Ipa generated withAppStore Distribution Profile requires to be distributed from App Store or TestFlight. However, I found that app panel was removed even for installing ad hoc ipa from iTunes 12.7. I found a workaround to install ad-hoc apps which might help to them who cannot install even ad hoc ipa. Please follow the instructions below,

1. Connect your device
2. Open Xcode and go to Window -> Devices
3. Select the connected device from left panel
4. Brows the IPA from Installed Apps -> + button
5. Wait few seconds and its done!

There are shorter ways of doing it like others have said, but you can also check each character until you encounter a second space yourself, then return the corresponding substring.

static string Extract(string str)
{
    bool end = false;
    int length = 0 ;
    foreach (char c in str)
    {
        if (c == ' ' && end == false)
        {
            end = true;
        }
        else if (c == ' ' && end == true)
        {
            break;
        }

        length++;
    }

    return str.Substring(0, length);
}

The simplest way to connect is through an OdbcConnection using code like this

using System.Data.Odbc;

using(OdbcConnection myConnection = new OdbcConnection())
{
    myConnection.ConnectionString = myConnectionString;
    myConnection.Open();

    //execute queries, etc

}

where myConnectionString is something like this

myConnectionString = @"Driver={Microsoft Access Driver (*.mdb)};" + 
"Dbq=C:\mydatabase.mdb;Uid=Admin;Pwd=;

See ConnectionStrings

In alternative you could create a DSN and then use that DSN in your connection string

• Open the Control Panel - Administrative Tools - ODBC Data Source Manager
• Go to the System DSN Page and ADD a new DSN
• Choose the Microsoft Access Driver (*.mdb) and press END
• Set the Name of the DSN (choose MyDSN for this example)
• Select the Database to be used
• Try the Compact or Recover commands to see if the connection works

now your connectionString could be written in this way

myConnectionString = "DSN=myDSN;"

Create the class with the following .h and .m files. In the .m file there is the following function

 - (void)linkAtPoint:(CGPoint)location

Inside this function we will check the ranges of substrings for which we need to give actions. Use your own logic to put your ranges.

And following is the usage of the subclass

TaggedLabel *label = [[TaggedLabel alloc] initWithFrame:CGRectMake(100, 100, 100, 100)];
[self.view addSubview:label];
label.numberOfLines = 0;
NSMutableAttributedString *attributtedString = [[NSMutableAttributedString alloc] initWithString : @"My name is @jjpp" attributes : @{ NSFontAttributeName : [UIFont systemFontOfSize:10],}];                                                                                                                                                                              
//Do not forget to add the font attribute.. else it wont work.. it is very important
[attributtedString addAttribute:NSForegroundColorAttributeName
                        value:[UIColor redColor]
                        range:NSMakeRange(11, 5)];//you can give this range inside the .m function mentioned above

following is the .h file

#import <UIKit/UIKit.h>

@interface TaggedLabel : UILabel<NSLayoutManagerDelegate>

@property(nonatomic, strong)NSLayoutManager *layoutManager;
@property(nonatomic, strong)NSTextContainer *textContainer;
@property(nonatomic, strong)NSTextStorage *textStorage;
@property(nonatomic, strong)NSArray *tagsArray;
@property(readwrite, copy) tagTapped nameTagTapped;

@end   

following is the .m file

#import "TaggedLabel.h"
@implementation TaggedLabel

- (id)initWithFrame:(CGRect)frame
{
 self = [super initWithFrame:frame];
 if (self)
 {
  self.userInteractionEnabled = YES;
 }
return self;
}

- (id)initWithCoder:(NSCoder *)aDecoder
{
 self = [super initWithCoder:aDecoder];
if (self)
{
 self.userInteractionEnabled = YES;
}
return self;
}

- (void)setupTextSystem
{
 _layoutManager = [[NSLayoutManager alloc] init];
 _textContainer = [[NSTextContainer alloc] initWithSize:CGSizeZero];
 _textStorage = [[NSTextStorage alloc] initWithAttributedString:self.attributedText];
 // Configure layoutManager and textStorage
 [_layoutManager addTextContainer:_textContainer];
 [_textStorage addLayoutManager:_layoutManager];
 // Configure textContainer
 _textContainer.lineFragmentPadding = 0.0;
 _textContainer.lineBreakMode = NSLineBreakByWordWrapping;
 _textContainer.maximumNumberOfLines = 0;
 self.userInteractionEnabled = YES;
 self.textContainer.size = self.bounds.size;
}

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event
{
 if (!_layoutManager)
 {
  [self setupTextSystem];
 }
 // Get the info for the touched link if there is one
 CGPoint touchLocation = [[touches anyObject] locationInView:self];
 [self linkAtPoint:touchLocation];
}

- (void)linkAtPoint:(CGPoint)location
{
 // Do nothing if we have no text
 if (_textStorage.string.length == 0)
 {
  return;
 }
 // Work out the offset of the text in the view
 CGPoint textOffset = [self calcGlyphsPositionInView];
 // Get the touch location and use text offset to convert to text cotainer coords
 location.x -= textOffset.x;
 location.y -= textOffset.y;
 NSUInteger touchedChar = [_layoutManager glyphIndexForPoint:location inTextContainer:_textContainer];
 // If the touch is in white space after the last glyph on the line we don't
 // count it as a hit on the text
 NSRange lineRange;
 CGRect lineRect = [_layoutManager lineFragmentUsedRectForGlyphAtIndex:touchedChar effectiveRange:&lineRange];
 if (CGRectContainsPoint(lineRect, location) == NO)
 {
  return;
 }
 // Find the word that was touched and call the detection block
    NSRange range = NSMakeRange(11, 5);//for this example i'm hardcoding the range here. In a real scenario it should be iterated through an array for checking all the ranges
    if ((touchedChar >= range.location) && touchedChar < (range.location + range.length))
    {
     NSLog(@"range-->>%@",self.tagsArray[i][@"range"]);
    }
}

- (CGPoint)calcGlyphsPositionInView
{
 CGPoint textOffset = CGPointZero;
 CGRect textBounds = [_layoutManager usedRectForTextContainer:_textContainer];
 textBounds.size.width = ceil(textBounds.size.width);
 textBounds.size.height = ceil(textBounds.size.height);

 if (textBounds.size.height < self.bounds.size.height)
 {
  CGFloat paddingHeight = (self.bounds.size.height - textBounds.size.height) / 2.0;
  textOffset.y = paddingHeight;
 }

 if (textBounds.size.width < self.bounds.size.width)
 {
  CGFloat paddingHeight = (self.bounds.size.width - textBounds.size.width) / 2.0;
  textOffset.x = paddingHeight;
 }
 return textOffset;
 }

@end

To start with you'll need the Android SDK to get started: http://developer.android.com/sdk/index.html BUT select for existing IDE so you get the tools rather than all of Android Studio.

In Chrome Beta on your Android device do the following:

Menu > Settings > Developer Tools > Enable USB Debugging

Hit the home key on the device and go to Settings > Developer Options > Enable USB Debugging

[Note: If you can't see Developer Options, go to Settings > About Device > Then tap the Build Number a number of times and eventually you'll see a message saying you are now a developer or something similar]

Connect your phone to your Computer via USB

On your Desktop open Chrome Canary (I think stable and Beta currently have issues):

In the address bar type: chrome://flags and enable - "Enable Developer Tools experiments" and hit the Relaunch button that appears.

Once it's relaunched open a terminal and run adb devices, you should now see your device appear in the list. When it has, in Canary go to chrome://inspect there you will see your device, so now click inspect.

This will open up devtools for your Chrome on Android.

Now click on the cog in the corner, then go to Experiments > Enable Port Forwarding (If you don't see port forwarding, you might not be in Chrome Beta)

Once Port forwarding is enabled, close and open dev tools.

Go back to the cog and select Port Forwarding, then type in the port you want to forward (i.e. for locahost:9000 on my local machine I'd type 9000 [Device port] and 127.0.0.1:9000 [Target]

There is a bug open where the first port is ignored, so it might be worth hitting enter on the first line and re-entering the same details on the second line.

You can now put localhost:9000 (or your port number) in Chrome for Android and view the site and use DevTools to inspect the page.

More details under Reverse Port Forwarding section of this site: https://developers.google.com/chrome-developer-tools/docs/remote-debugging

You don't actually need to run a command from an xterm session, you can run it directly:

String[] arguments = new String[] {"/path/to/executable", "arg0", "arg1", "etc"};
Process proc = new ProcessBuilder(arguments).start();

If the process responds interactively to the input stream, and you want to inject values, then do what you did before:

OutputStream out = proc.getOutputStream();  
out.write("command\n");  
out.flush();

Don't forget the '\n' at the end though as most apps will use it to identify the end of a single command's input.

imwrite(A,filename) writes image data A to the file specified by filename, inferring the file format from the extension

First, you're missing some parentheses in your conditional:

if ($("#about").hasClass("opened")) {
  $("#about").animate({right: "-700px"}, 2000);
}

But you can also simplify this to:

$('#about.opened').animate(...);

If #about doesn't have the opened class, it won't animate.

If the problem is with the animation itself, we'd need to know more about your element positioning (absolute? absolute inside relative parent? does the parent have layout?)

here is the example using Pure JavaScript

function scrollpage() {  _x000D_
 function f() _x000D_
 {_x000D_
  window.scrollTo(0,i);_x000D_
  if(status==0) {_x000D_
      i=i+40;_x000D_
   if(i>=Height){ status=1; } _x000D_
  } else {_x000D_
   i=i-40;_x000D_
   if(i<=1){ status=0; }  // if you don't want continue scroll then remove this line_x000D_
  }_x000D_
 setTimeout( f, 0.01 );_x000D_
 }f();_x000D_
}_x000D_
var Height=document.documentElement.scrollHeight;_x000D_
var i=1,j=Height,status=0;_x000D_
scrollpage();_x000D_
</script>

<style type="text/css">_x000D_
_x000D_
 #top { border: 1px solid black;  height: 20000px; }_x000D_
 #bottom { border: 1px solid red; }_x000D_
_x000D_
</style>

<div id="top">top</div>_x000D_
<div id="bottom">bottom</div>

Try this

java -jar <jar-file-name>.jar

I was asking myself the same question but the problem with the current answers is that they don't safe check the processes to be killed so... it could lead to terrible mistakes :)... especially if several processes matches the pattern.

As a disclaimer, I'm not a sh pro and there is certainly room for improvement.

So I wrote a little sh script :

#!/bin/sh

killables=$(ps aux | grep $1 | grep -v mykill | grep -v grep)
if [ ! "${killables}" = "" ]
then
  echo "You are going to kill some process:"
  echo "${killables}"
else
  echo "No process with the pattern $1 found."
  return
fi
echo -n "Is it ok?(Y/N)"
read input
if [ "$input" = "Y" ]
then
  for pid in $(echo "${killables}" | awk '{print $2}')
  do
    echo killing $pid "..."
    kill $pid 
    echo $pid killed
  done
fi

After trying many solutions, seems like the one that finally did the trick was to connect by IP. No longer file sockets getting deleted randomly.

Just update your MySQL client config (e.g. /usr/local/etc/my.cnf) with:

[client]
port = 3306
host=127.0.0.1
protocol=tcp

In summary, two ways were introduced

1) using order by DBMS_RANDOM.VALUE clause
2) using sample([%]) function

The first way has advantage in 'CORRECTNESS' which means you will never fail get result if it actually exists, while in the second way you may get no result even though it has cases satisfying the query condition since information is reduced during sampling.

The second way has advantage in 'EFFICIENT' which mean you will get result faster and give light load to your database. I was given an warning from DBA that my query using the first way gives loads to the database

You can choose one of two ways according to your interest!

To switch to root so that all subsequent commands are executed with high privileges instead of using sudo before each command use following command and then provide the password when prompted.

sudo -i

User will change and remain root until you close the terminal. Execute exit commmand which will change the user back to original user without closing terminal.

lets say you have this:

<ul>
    <li></li>
    <li>
        <ul>
            <li></li>
            <li></li>
        </ul>
    </li>
    <li></li>
<ul>

Now if you DONT need IE6 compatibility (reference at Quirksmode) you can have the following css

ul li { background:#fff; }
ul>li { background:#f0f; }

The > is a direct children operator, so in this case only the first level of lis will be purple.

Hope this helps

1. Make sure that the version of the m2e(clipse) plugin that you're running is at least 1.1.0

2. Close maven project - right click "Close Project"

3. Manualy remove all classpathentry with kind="var" in .classpath file
4. Open project

or

1. Remove maven project
2. Manualy rmeove .classpath 4 Reimport project

Here is my problem and the solution that what worked for me.

I added a new controller with a single action returning a string to an existing application. But when I navigated to that controller via browser, I was getting the same error as mentioned above.

After doing lot of googling, I found out that I simply had to modify my Global.asax.cs file for it to recognize the new controller. All I did was added a space to Global.asax.cs file so that it is modified and it worked

if A: will prove false if A is 0, False, empty string, empty list or None, which can lead to undesired results.

As far as I can tell, both syntaxes are equivalent. The first is SQL standard, the second is MySQL's extension.

So they should be exactly equivalent performance wise.

http://dev.mysql.com/doc/refman/5.6/en/insert.html says:

INSERT inserts new rows into an existing table. The INSERT ... VALUES and INSERT ... SET forms of the statement insert rows based on explicitly specified values. The INSERT ... SELECT form inserts rows selected from another table or tables.

shoud be @drawable/image where image could have any extension like: image.png, image.xml, image.gif. Android will automatically create a reference in R class with its name, so you cannot have in any drawable folder image.png and image.gif.

CSS:

.imgMaxWidth {
    max-width:100px;
    height:auto;
}
.imgMaxHeight {
    max-height:100px;
    width:auto;
}

HTML:

<img src="image.jpg" class="imageToResize imgMaxHeight" />

jQuery:

<script type="text/javascript">
function onLoadF() {
    $('.imageToResize').each(function() {
        var imgWidth = $(this).width();
        if (imgWidth>100) {
            $(this).removeClass("imgMaxHeight").addClass("imgMaxWidth");
        }
    });
}
window.onload = onLoadF;
</script>