You can run your application with parameters such as app -something -somethingelse. int argc represents number of these parameters and char *argv[] is an array with actual parameters being passed into your application. This way you can work with them inside of your application.

Use pyplot.text() (import matplotlib.pyplot as plt)

import matplotlib.pyplot as plt

x=[1,2,3]
y=[9,8,7]

plt.plot(x,y)
for a,b in zip(x, y): 
    plt.text(a, b, str(b))
plt.show()

I solved this on 12.10 by installing libssl-dev.

sudo apt-get install libssl-dev

Update: Angular 1.1.5 added a ternary operator, this answer is correct only to versions preceding 1.1.5. For 1.1.5 and later, see the currently accepted answer.

Before Angular 1.1.5:

The form of a ternary in angularjs is:

((condition) && (answer if true) || (answer if false))

An example would be:

<ul class="nav">
    <li>
        <a   href="#/page1" style="{{$location.path()=='/page2' && 'color:#fff;' || 'color:#000;'}}">Goals</a>
    </li>
    <li>
        <a   href="#/page2" style="{{$location.path()=='/page2' && 'color:#fff;' || 'color:#000;'}}">Groups</a>
    </li>
</ul>

or:

 <li  ng-disabled="currentPage == 0" ng-click="currentPage=0"  class="{{(currentPage == 0) && 'disabled' || ''}}"><a> << </a></li>

You would normally do a Response.Flush followed by a Response.Close, but for some reason the iTextSharp library doesn't seem to like this. The data doesn't make it through and Adobe thinks the PDF is corrupt. Leave out the Response.Close function and see if your results are better:

Response.Clear();
Response.ContentType = "application/pdf";
Response.AppendHeader("Content-disposition", "attachment; filename=file.pdf"); // open in a new window
Response.OutputStream.Write(outStream.GetBuffer(), 0, outStream.GetBuffer().Length);
Response.Flush();

// For some reason, if we close the Response stream, the PDF doesn't make it through
//Response.Close();

This answer is here: Python: how to suppress logging statements from third party libraries?

You can leave the default logging level for basicConfig, and then you set the DEBUG level when you get the logger for your module.

logging.basicConfig(format='%(asctime)s %(module)s %(filename)s:%(lineno)s - %(message)s')
logger = logging.getLogger(__name__)
logger.setLevel(logging.DEBUG)

logger.debug("my debug message")

00 23 * * * [[ $(date +'%d') -eq $(cal | awk '!/^$/{ print $NF }' | tail -1) ]] && job

Check out a related question on the unix.com forum.

I had a problem with a big delay between calling setNeedsDisplay and drawRect: (5 seconds). It turned out I called setNeedsDisplay in a different thread than the main thread. After moving this call to the main thread the delay went away.

Hope this is of some help.

SpringBoot2.0 ,I resolve it by follow code:

@Bean public ObjectMapper objectMapper() {
 return new ObjectMapper().disable(SerializationFeature.FAIL_ON_EMPTY_BEANS);}

Directly connect your Android device and select the USB debugging option in the device. Eclipse will itself find your device, and then just run the code.

Or alternatively, paste your APK file in the Android SDK platform-tools folder and from the command prompt install it like this:

D:......../platform-tools> adb install yourfile.apk.

Use the following will help

keytool -import -v -trustcacerts -alias keyAlias -file server.cer -keystore cacerts.jks -keypass changeit

Sometime you must first run the container with root:

docker exec -ti --user root <container-id> /bin/bash

Then in the container, to install Vim or something else:

apt-get install vim

Class Row will handle one row from your database.

Complete implementation of UpdateTask responsible for filling up UI.

import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;

import javax.swing.JTable;
import javax.swing.SwingWorker;

public class JTableUpdateTask extends SwingWorker<JTable, Row> {

    JTable      table       = null;

    ResultSet   resultSet   = null;

    public JTableUpdateTask(JTable table, ResultSet rs) {
        this.table = table;
        this.resultSet = rs;
    }

    @Override
    protected JTable doInBackground() throws Exception {
        List<Row> rows = new ArrayList<Row>();
        Object[] values = new Object[6];
        while (resultSet.next()) {
            values = new Object[6];
            values[0] = resultSet.getString("id");
            values[1] = resultSet.getString("student_name");
            values[2] = resultSet.getString("street");
            values[3] = resultSet.getString("city");
            values[4] = resultSet.getString("state");
            values[5] = resultSet.getString("zipcode");
            Row row = new Row(values);
            rows.add(row);
        }
        process(rows); 
        return this.table;
    }

    protected void process(List<Row> chunks) {
        ResultSetTableModel tableModel = (this.table.getModel() instanceof ResultSetTableModel ? (ResultSetTableModel) this.table.getModel() : null);
        if (tableModel == null) {
            try {
                tableModel = new ResultSetTableModel(this.resultSet.getMetaData(), chunks);
            } catch (SQLException e) {
                e.printStackTrace();
            }
            this.table.setModel(tableModel);
        } else {
            tableModel.getRows().addAll(chunks);
        }
        tableModel.fireTableDataChanged();
    }
}

Table Model:

import java.sql.ResultSetMetaData;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;

import javax.swing.table.AbstractTableModel;

/**
 * Simple wrapper around Object[] representing a row from the ResultSet.
 */
class Row {
    private final Object[]  values;

    public Row(Object[] values) {
        this.values = values;
    }

    public int getSize() {
        return values.length;
    }

    public Object getValue(int i) {
        return values[i];
    }
}

// TableModel implementation that will be populated by SwingWorker.
public class ResultSetTableModel extends AbstractTableModel {
    private final ResultSetMetaData rsmd;

    private List<Row>               rows;

    public ResultSetTableModel(ResultSetMetaData rsmd, List<Row> rows) {
        this.rsmd = rsmd;
        if (rows != null) {
            this.rows = rows;
        } else {
            this.rows = new ArrayList<Row>();
        }

    }

    public int getRowCount() {
        return rows.size();
    }

    public int getColumnCount() {
        try {
            return rsmd.getColumnCount();
        } catch (SQLException e) {
            e.printStackTrace();
        }
        return 0;
    }

    public Object getValue(int row, int column) {
        return rows.get(row).getValue(column);
    }

    public String getColumnName(int col) {
        try {
            return rsmd.getColumnName(col + 1);
        } catch (SQLException e) {
            e.printStackTrace();
        }
        return "";
    }

    public Class<?> getColumnClass(int col) {
        String className = "";
        try {
            className = rsmd.getColumnClassName(col);
        } catch (SQLException e) {
            e.printStackTrace();
        }
        return className.getClass();
    }

    @Override
    public Object getValueAt(int rowIndex, int columnIndex) {
        if(rowIndex > rows.size()){
            return null;
        }
        return rows.get(rowIndex).getValue(columnIndex);
    }

    public List<Row> getRows() {
        return this.rows;
    }

    public void setRows(List<Row> rows) {
        this.rows = rows;
    }
}

Main Application which builds UI and does the database connection

import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;

import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JTable;

public class MainApp {
    static Connection conn = null;
    static void init(final ResultSet rs) {
        JFrame frame = new JFrame();
        frame.setLayout(new BorderLayout());
        final JTable table = new JTable();
        table.setPreferredSize(new Dimension(300,300));
        table.setMinimumSize(new Dimension(300,300));
        table.setMaximumSize(new Dimension(300,300));
        frame.add(table, BorderLayout.CENTER);
        JButton button = new JButton("Start Loading");
        button.setPreferredSize(new Dimension(30,30));
        button.addActionListener(new ActionListener() {
            @Override
            public void actionPerformed(ActionEvent e) {
                JTableUpdateTask jTableUpdateTask = new JTableUpdateTask(table, rs);
                jTableUpdateTask.execute();

            }
        });
        frame.add(button, BorderLayout.SOUTH);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.setVisible(true);
    }

    public static void main(String[] args) {
        String url = "jdbc:mysql://localhost:3306/test";
        String driver = "com.mysql.jdbc.Driver";
        String userName = "root";
        String password = "root";
        try {
            Class.forName(driver).newInstance();
            conn = DriverManager.getConnection(url, userName, password);
            PreparedStatement pstmt = conn.prepareStatement("Select id, student_name, street, city, state,zipcode from student");
            ResultSet rs = pstmt.executeQuery();
            init(rs);
        } catch (Exception e) {
            e.printStackTrace();
        }
    }
}

10,000? 70,000? is that all :)

FreeBSD is probably the server you want, Here's a little blog post about tuning it to handle 100,000 connections, its has had some interesting features like zero-copy sockets for some time now, along with kqueue to act as a completion port mechanism.

Solaris can handle 100,000 connections back in the last century!. They say linux would be better

The best description I've come across is this presentation/paper on writing a scalable webserver. He's not afraid to say it like it is :)

Same for software: the cretins on the application layer forced great innovations on the OS layer. Because Lotus Notes keeps one TCP connection per client open, IBM contributed major optimizations for the ”one process, 100.000 open connections” case to Linux

And the O(1) scheduler was originally created to score well on some irrelevant Java benchmark. The bottom line is that this bloat bene?ts all of us.

At this time, I would answer "no" or "with difficulty", but that could change over time as the android NFC API evolves.

There are three modes of NFC interaction:

1. Reader-Writer: The phone reads tags and writes to them. It's not emulating a card instead an NFC reader/writer device. Hence, you can't emulate a tag in this mode.

2. Peer-to-peer: the phone can read and pass back ndef messages. If the tag reader supports peer-to-peer mode, then the phone could possibly act as a tag. However, I'm not sure if android uses its own protocol on top of the LLCP protocol (NFC logical link protocol), which would then prevent most readers from treating the phone as an nfc tag.

3. Card-emulation mode: the phone uses a secure element to emulate a smart card or other contactless device. I am not sure if this is launched yet, but could provide promising. However, using the secure element might require the hardware vendor or some other person to verify your app / give it permissions to access the secure element. It's not as simple as creating a regular NFC android app.

More details here: http://www.mail-archive.com/[email protected]/msg152222.html

A real question would be: why are you trying to emulate a simple old nfc tag? Is there some application I'm not thinking of? Usually, you'd want to emulate something like a transit card, access key, or credit card which would require a secure element (I think, but not sure).

You answered the question by yourself: "I know that absolute positioned elements are removed from the flow, thus ignored by other elements." So you can't set the parents height according to an absolutely positioned element.

You either use fixed heights or you need to involve JS.

Based on kynan's answer, here are the same aliases, modified so they can handle spaces and initial dashes in filenames:

accept-ours = "!f() { [ -z \"$@\" ] && set - '.'; git checkout --ours -- \"$@\"; git add -u -- \"$@\"; }; f"
accept-theirs = "!f() { [ -z \"$@\" ] && set - '.'; git checkout --theirs -- \"$@\"; git add -u -- \"$@\"; }; f"

That is a unicode character code that, when parsed by JavaScript as a string, is converted into its corresponding character (JavaScript automatically converts any occurrences of \uXXXX into the corresponding Unicode character). For example, your example would be:

Browse Interests{{/i}}</a>\n        </li>\n  {{#logged_in}}\n

As you can see, \u003C changes into < (less-than sign) and \u003E changes into > (greater-than sign).

In addition to the link posted by Raynos, this page from the Unicode website lists a lot of characters (so many that they decided to annoyingly group them) and this page has a (kind of) nice index.

Due to the mixed comments about BuildConfig.DEBUG, I used the following to disable crashlytics (and analytics) in debug mode :

update /app/build.gradle

android {
    compileSdkVersion 25
    buildToolsVersion "25.0.1"

    defaultConfig {
        applicationId "your.awesome.app"
        minSdkVersion 16
        targetSdkVersion 25
        versionCode 100
        versionName "1.0.0"
        buildConfigField 'boolean', 'ENABLE_CRASHLYTICS', 'true'
    }
    buildTypes {
        debug {
            debuggable true
            minifyEnabled false
            buildConfigField 'boolean', 'ENABLE_CRASHLYTICS', 'false'
        }
        release {
            debuggable false
            minifyEnabled true
            proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
        }
    }
}

then, in your code you detect the ENABLE_CRASHLYTICS flag as follows:

    if (BuildConfig.ENABLE_CRASHLYTICS)
    {
        // enable crashlytics and answers (Crashlytics by default includes Answers)
        Fabric.with(this, new Crashlytics());
    }

use the same concept in your app and rename ENABLE_CRASHLYTICS to anything you want. I like this approach because I can see the flag in the configuration and I can control the flag.

Try Logic Friday 1 It includes tools from the Univerity of California (Espresso and misII) and makes them usable with a GUI. You can enter boolean equations and truth tables as desired. It also features a graphical gate diagram input and output.

The minimization can be carried out two-level or multi-level. The two-level form yields a minimized sum of products. The multi-level form creates a circuit composed out of logical gates. The types of gates can be restricted by the user.

Your expression simplifies to C.

I have a solution that involves (Vanilla) JavaScript, but only as a library. You habe to include it once and then all you need to do is set the appropriate source attribute of the number inputs.

The source attribute should be the querySelectorAll selector of the range input you want to listen to.

It even works with selectcs. And it works with multiple listeners. And it works in the other direction: change the number input and the range input will adjust. And it will work on elements added later onto the page (check https://codepen.io/HerrSerker/pen/JzaVQg for that)

Tested in Chrome, Firefox, Edge and IE11

;(function(){_x000D_
  _x000D_
  function emit(target, name) {_x000D_
    var event_x000D_
    if (document.createEvent) {_x000D_
      event = document.createEvent("HTMLEvents");_x000D_
      event.initEvent(name, true, true);_x000D_
    } else {_x000D_
      event = document.createEventObject();_x000D_
      event.eventType = name;_x000D_
    }_x000D_
_x000D_
    event.eventName = name;_x000D_
_x000D_
    if (document.createEvent) {_x000D_
      target.dispatchEvent(event);_x000D_
    } else {_x000D_
      target.fireEvent("on" + event.eventType, event);_x000D_
    }    _x000D_
  }_x000D_
_x000D_
  var outputsSelector = "input[type=number][source],select[source]";_x000D_
  _x000D_
  function onChange(e) {_x000D_
    var outputs = document.querySelectorAll(outputsSelector)_x000D_
    for (var index = 0; index < outputs.length; index++) {_x000D_
      var item = outputs[index]_x000D_
      var source = document.querySelector(item.getAttribute('source'));_x000D_
      if (source) {_x000D_
        if (item === e.target) {_x000D_
          source.value = item.value_x000D_
          emit(source, 'input')_x000D_
          emit(source, 'change')_x000D_
        }_x000D_
_x000D_
        if (source === e.target) {_x000D_
          item.value = source.value_x000D_
        }_x000D_
      }_x000D_
    }_x000D_
  }_x000D_
  _x000D_
  document.addEventListener('change', onChange)_x000D_
  document.addEventListener('input', onChange)_x000D_
}());

<div id="div">_x000D_
  <input name="example" type="range" max="2250000" min="-200000" value="0" step="50000">_x000D_
  <input id="example-value" type="number" max="2250000" min="-200000" value="0" step="50000" source="[name=example]">_x000D_
  <br>_x000D_
_x000D_
  <input name="example2" type="range" max="2240000" min="-160000" value="0" step="50000">_x000D_
  <input type="number" max="2240000" min="-160000" value="0" step="50000" source="[name=example2]">_x000D_
  <input type="number" max="2240000" min="-160000" value="0" step="50000" source="[name=example2]">_x000D_
  <br>_x000D_
  _x000D_
  <input name="example3" type="range" max="20" min="0" value="10" step="1">_x000D_
  <select source="[name=example3]">_x000D_
    <option value="0">0</option>_x000D_
    <option value="1">1</option>_x000D_
    <option value="2">2</option>_x000D_
    <option value="3">3</option>_x000D_
    <option value="4">4</option>_x000D_
    <option value="5">5</option>_x000D_
    <option value="6">6</option>_x000D_
    <option value="7">7</option>_x000D_
    <option value="8">8</option>_x000D_
    <option value="9">9</option>_x000D_
    <option value="10">10</option>_x000D_
    <option value="11">11</option>_x000D_
    <option value="12">12</option>_x000D_
    <option value="13">13</option>_x000D_
    <option value="14">14</option>_x000D_
    <option value="15">15</option>_x000D_
    <option value="16">16</option>_x000D_
    <option value="17">17</option>_x000D_
    <option value="18">18</option>_x000D_
    <option value="19">19</option>_x000D_
    <option value="20">20</option>_x000D_
  </select>_x000D_
  <br>_x000D_
  _x000D_
</div>_x000D_
<br>

You can use the $set syntax if you want to set the value of a document to an arbitrary value. This will either update the value if the attribute already exists on the document or create it if it doesn't. If you need to set a single value in a dictionary like you describe, you can use the dot notation to access child values.

If p is the object retrieved:

existing = p['d']['a']

For pymongo versions < 3.0

db.ProductData.update({
  '_id': p['_id']
},{
  '$set': {
    'd.a': existing + 1
  }
}, upsert=False, multi=False)

For pymongo versions >= 3.0

db.ProductData.update_one({
  '_id': p['_id']
},{
  '$set': {
    'd.a': existing + 1
  }
}, upsert=False)

However if you just need to increment the value, this approach could introduce issues when multiple requests could be running concurrently. Instead you should use the $inc syntax:

For pymongo versions < 3.0:

db.ProductData.update({
  '_id': p['_id']
},{
  '$inc': {
    'd.a': 1
  }
}, upsert=False, multi=False)

For pymongo versions >= 3.0:

db.ProductData.update_one({
  '_id': p['_id']
},{
  '$inc': {
    'd.a': 1
  }
}, upsert=False)

This ensures your increments will always happen.

A job I do a lot it seems, it's to send forms via ajax, that usually includes an attachment and several input fields. In the more classic workflow (HTML/PHP/JQuery) I've used $.ajax() in the client and PHP on the server with total success.

I've used axios for dart/flutter but now I'm learning react for building my web sites, and JQuery doesn't make sense.

Problem is axios is giving me some headaches with PHP on the other side, when posting both normal input fields and uploading a file in the same form. I tried $_POST and file_get_contents("php://input") in PHP, sending from axios with FormData or using a json construct, but I can never get both the file upload and the input fields.

On the other hand with Fetch I've been successful with this code:

var formid = e.target.id;

// populate FormData
var fd    = buildFormData(formid);       

// post to remote
fetch('apiurl.php', {
  method: 'POST',
  body: fd,
  headers: 
  {
     'Authorization' : 'auth',
     "X-Requested-With" : "XMLHttpRequest"
  }
})    

On the PHP side I'm able to retrieve the uploads via $_FILES and processing the other fields data via $_POST:

  $posts = [];
  foreach ($_POST as $post) {
      $posts[] =  json_decode($post);
  }

Pretty straight forward, IIS doesn't have access to your web.config. I'd start by taking the site out of your documents folder. Verify it has r/w permissions then as well.

Was getting call to undefined function bcmod()

yum install php-bcmath
systemctl restart httpd.service

you should then see something similar to /etc/php.d/bcmath.ini listed under phpinfo.

Centos 7
Plesk 12
PHP 5.4.16

I got the same error when I executed the Spring JPA deleteAll() method from Junit test cases. I simply used the deleteInBatch() & deleteAllInBatch() and its perfectly works. We do not need to mark @Transactional at the test cases level.

I use something similar, but with opposite logic, in a lot of my functions.

DWORD dwError = ERROR_SUCCESS;

do
{
    if ( (dwError = SomeFunction()) != ERROR_SUCCESS )
    {
         /* handle error */
         continue;
    }

    if ( (dwError = SomeOtherFunction()) != ERROR_SUCCESS )
    {
         /* handle error */
         continue;
    }
}
while ( 0 );

if ( dwError != ERROR_SUCCESS )
{
    /* resource cleanup */
}

URL-encoded payload must be provided on the body parameter of the http.NewRequest(method, urlStr string, body io.Reader) method, as a type that implements io.Reader interface.

Based on the sample code:

package main

import (
    "fmt"
    "net/http"
    "net/url"
    "strconv"
    "strings"
)

func main() {
    apiUrl := "https://api.com"
    resource := "/user/"
    data := url.Values{}
    data.Set("name", "foo")
    data.Set("surname", "bar")

    u, _ := url.ParseRequestURI(apiUrl)
    u.Path = resource
    urlStr := u.String() // "https://api.com/user/"

    client := &http.Client{}
    r, _ := http.NewRequest(http.MethodPost, urlStr, strings.NewReader(data.Encode())) // URL-encoded payload
    r.Header.Add("Authorization", "auth_token=\"XXXXXXX\"")
    r.Header.Add("Content-Type", "application/x-www-form-urlencoded")
    r.Header.Add("Content-Length", strconv.Itoa(len(data.Encode())))

    resp, _ := client.Do(r)
    fmt.Println(resp.Status)
}

resp.Status is 200 OK this way.

Regarding the cygwin1.dll not found error, a solution I have used for at least 8 years is to add the Cygwin bin directories to the end of my %PATH% in My Computer -> Properties -> Advanced -> Environment Variables. I add them to the end of the path so in my normal work, they are searched last, minimizing the possibility of conflicts (in fact, I have had no problems with conflicts in all this time).

When you invoke the Cygwin Bash Shell, those directories get prepended to the %PATH% so everything works as intended in that environment as well.

When not running in Cygwin shell, my %PATH% is:

Path=c:\opt\perl\bin; \
     ...
     C:\opt\cygwin\bin; \
     C:\opt\cygwin\usr\bin; \
     C:\opt\cygwin\usr\local\bin;

This way, for example, ActiveState Perl's perl is found first when I am not in a Cygwin Shell, but the Cygwin perl is found when I am working in the Cygwin Shell.

A quick fix to "plot overlap" is to use plt.tight_layout():

Example (in my case)

for i,var in enumerate(categorical_variables):
    plt.title(var)
    plt.xticks(rotation=45)
    df[var].hist()
    plt.subplot(len(categorical_variables)/2, 2, i+1)

plt.tight_layout()

req.query is the query string sent to the server, example /page?test=1, req.param is the parameters passed to the handler.

app.get('/user/:id', handler);, going to /user/blah, req.param.id would return blah;

For windows I use following:

Process process = new ProcessBuilder("tasklist.exe", "/fo", "csv", "/nh").start();
new Thread(() -> {
    Scanner sc = new Scanner(process.getInputStream());
    if (sc.hasNextLine()) sc.nextLine();
    while (sc.hasNextLine()) {
        String line = sc.nextLine();
        String[] parts = line.split(",");
        String unq = parts[0].substring(1).replaceFirst(".$", "");
        String pid = parts[1].substring(1).replaceFirst(".$", "");
        System.out.println(unq + " " + pid);
    }
}).start();
process.waitFor();
System.out.println("Done");

LinkedHashMap maintains the order of the keys.

java.util.LinkedHashMap appears to work just like a normal HashMap otherwise.

Simply, App.config is an XML based file format that holds the Application Level Configurations.

Example:

<?xml version="1.0"?>
<configuration>
  <appSettings>
    <add key="key" value="test" />
  </appSettings>
</configuration>

You can access the configurations by using ConfigurationManager as shown in the piece of code snippet below:

var value = System.Configuration.ConfigurationManager.AppSettings["key"];
// value is now "test"

Note: ConfigurationSettings is obsolete method to retrieve configuration information.

var value = System.Configuration.ConfigurationSettings.AppSettings["key"];

I use PLAY JSON library you can find the mavn repo for only the JSON library not the whole framework here

    val json = "com.typesafe.play" %% "play-json" % version
    val typesafe = "typesafe.com" at "http://repo.typesafe.com/typesafe/releases/"

A very good tutorials about how to use them, are available here:

http://mandubian.com/2012/09/08/unveiling-play-2-dot-1-json-api-part1-jspath-reads-combinators/

http://mandubian.com/2012/10/01/unveiling-play-2-dot-1-json-api-part2-writes-format-combinators/

http://mandubian.com/2012/10/29/unveiling-play-2-dot-1-json-api-part3-json-transformers/

Better Way -

        double value = 10.567;
        int result = (int)((value - (int)value) * 100);
        Console.WriteLine(result);

Output -

56

I believe this is controlled by the css color property applied to the element.

In pure Javascript, use: e.preventDefault()

e.preventDefault() is used in jquery but works in javascript.

document.querySelector(".buttonclick").addEventListener("click", 
function(e){

  //some code

  e.preventDefault();
})

// Create Customer class as follows:
export default class Customer {}

// Import the class 
// no need for .js extension in path cos gets inferred automatically
import Customer from './path/to/Customer'; 
// or
const Customer = require('./path/to/Customer') 

// Use the class
var customer = new Customer();
var name = customer.getName();

Read this my answer here

How do I export a project in the Android studio?

This will guide you step by step to generate signed APK and how to create keystore file from Android Studio.

From the link you can do it easily as I added the screenshot of it step by step.

Short answer

If you have Key-store file then you can do same simply.

Go to Build then click on Generate Signed APK

Here is a complete screenshot example that works with chrome in 2021. The end result is a blob ready to be transmitted. Flow is: request media > grab frame > draw to canvas > transfer to blob. If you want to do it more memory efficient explore OffscreenCanvas or possibly ImageBitmapRenderingContext

https://jsfiddle.net/v24hyd3q/1/

// Request media
navigator.mediaDevices.getDisplayMedia().then(stream => 
{
  // Grab frame from stream
  let track = stream.getVideoTracks()[0];
  let capture = new ImageCapture(track);
  capture.grabFrame().then(bitmap => 
  {
    // Stop sharing
    track.stop();
      
    // Draw the bitmap to canvas
    canvas.width = bitmap.width;
    canvas.height = bitmap.height;
    canvas.getContext('2d').drawImage(bitmap, 0, 0);
      
    // Grab blob from canvas
    canvas.toBlob(blob => {
        // Do things with blob here
        console.log('output blob:', blob);
    });
  });
})
.catch(e => console.log(e));

SELECT A.ABC_ID, A.VAL FROM A WHERE NOT EXISTS 
   (SELECT * FROM B WHERE B.ABC_ID = A.ABC_ID AND B.VAL = A.VAL)

or

SELECT A.ABC_ID, A.VAL FROM A WHERE VAL NOT IN 
    (SELECT VAL FROM B WHERE B.ABC_ID = A.ABC_ID)

or

SELECT A.ABC_ID, A.VAL LEFT OUTER JOIN B 
    ON A.ABC_ID = B.ABC_ID AND A.VAL = B.VAL FROM A WHERE B.VAL IS NULL

Please note that these queries do not require that ABC_ID be in table B at all. I think that does what you want.

There are just two minor things here.

The first is in the following carousel indicator list items:

<li data-target="carousel" data-slide-to="0"></li>

You need to pass the data-target attribute a selector which means the ID must be prefixed with #. So change them to the following:

<li data-target="#carousel" data-slide-to="0"></li>

Secondly, you need to give the carousel a starting point so both the carousel indicator items and the carousel inner items must have one active class. Like this:

<ol class="carousel-indicators">
    <li data-target="#carousel" data-slide-to="0" class="active"></li>
    <!-- Other Items -->
</ol>
<div class="carousel-inner">
    <div class="item active">
        <img src="https://picsum.photos/1500/600?image=1" alt="Slide 1" />
    </div>
    <!-- Other Items -->
</div>

Working Demo in Fiddle

The indexing e.g. [0] should occour inside of the print...

Since String.Length is an integer (that is an alias for Int32), its size is limited to Int32.MaxValue unicode characters. ;-)

Dragging an object and placing in a different location is part of the standard of HTML5. All the objects can be draggable. But the Specifications of below web browser should be followed. API Chrome Internet Explorer Firefox Safari Opera Version 4.0 9.0 3.5 6.0 12.0

You can find example from below: https://www.w3schools.com/html/tryit.asp?filename=tryhtml5_draganddrop2

All scripting languages are programming languages.

Languages are not classed as script or not - it entirely depends on the execution environment.

If the environment is one that is interpreted, this is commonly referred to as a scripting environment.

The variable mean_data is a nested list, in Python accessing a nested list cannot be done by multi-dimensional slicing, i.e.: mean_data[1,2], instead one would write mean_data[1][2].

This is becausemean_data[2] is a list. Further indexing is done recursively - since mean_data[2] is a list, mean_data[2][0] is the first index of that list.

Additionally, mean_data[:][0] does not work because mean_data[:] returns mean_data.

The solution is to replace the array ,or import the original data, as follows:

mean_data = np.array(mean_data)

numpy arrays (like MATLAB arrays and unlike nested lists) support multi-dimensional slicing with tuples.

To delete the last element from the list just do this.

a = [1,2,3,4,5]
a = a[:-1]
#Output [1,2,3,4] 

So, I would like to explain the scenario where I had to make use of this solution. Basically, I wanted to undo the background-color attribute set by another CSS. The expected end result was to make it look as though the original CSS had never applied the background-color attribute . Setting background-color:transparent; made that effective.

Converting a 2D JavaScript array to an HTML table

To turn a 2D JavaScript array into an HTML table, you really need but a little bit of code :

function arrayToTable(tableData) {_x000D_
    var table = $('<table></table>');_x000D_
    $(tableData).each(function (i, rowData) {_x000D_
        var row = $('<tr></tr>');_x000D_
        $(rowData).each(function (j, cellData) {_x000D_
            row.append($('<td>'+cellData+'</td>'));_x000D_
        });_x000D_
        table.append(row);_x000D_
    });_x000D_
    return table;_x000D_
}_x000D_
_x000D_
$('body').append(arrayToTable([_x000D_
    ["John","Slegers",34],_x000D_
    ["Tom","Stevens",25],_x000D_
    ["An","Davies",28],_x000D_
    ["Miet","Hansen",42],_x000D_
    ["Eli","Morris",18]_x000D_
]));

<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script>

Loading a JSON file

If you want to load your 2D array from a JSON file, you'll also need a little bit of Ajax code :

$.ajax({
    type: "GET",
    url: "data.json",
    dataType: 'json',
    success: function (data) {
        $('body').append(arrayToTable(data));
    }
});

Hercules is fantastic. It's a fully functioning tcp/udp client/server, amazing for debugging sockets. More details on the web site.

It is so simple, you have 2 objects with the same name and when you say: bank_holiday[month] python thinks you wanna run your function and got ERROR.

Just rename your array to bank_holidays <--- add a 's' at the end! like this:

bank_holidays= [1, 0, 1, 1, 2, 0, 0, 1, 0, 0, 0, 2] #gives the list of bank holidays in each month

def bank_holiday(month):
   if month <1 or month > 12:
       print("Error: Out of range")
       return
   print(bank_holidays[month-1],"holiday(s) in this month ")

bank_holiday(int(input("Which month would you like to check out: ")))

Sub CopyValueWithFormatting()
    Sheet1.Range("A1").Copy
    With Sheet2.Range("B1")
        .PasteSpecial xlPasteFormats
        .PasteSpecial xlPasteValues
    End With
End Sub

This was added to the upgrade documentation on Dec 29, 2015, so if you upgraded before then you probably missed it.

When fetching any attribute from the model it checks if that column should be cast as an integer, string, etc.

By default, for auto-incrementing tables, the ID is assumed to be an integer in this method:

https://github.com/laravel/framework/blob/5.2/src/Illuminate/Database/Eloquent/Model.php#L2790

So the solution is:

class UserVerification extends Model
{
    protected $primaryKey = 'your_key_name'; // or null

    public $incrementing = false;

    // In Laravel 6.0+ make sure to also set $keyType
    protected $keyType = 'string';
}

My favourite of the below is var_dump, which when called as:

var_dump("%d", count);

produces output like:

patch.c:150:main(): count = 0

Credit to @"Jonathan Leffler". All are C89-happy:

Code

#define DEBUG 1
#include <stdarg.h>
#include <stdio.h>
void debug_vprintf(const char *fmt, ...)
{
    va_list args;
    va_start(args, fmt);
    vfprintf(stderr, fmt, args);
    va_end(args);
}

/* Call as: (DOUBLE PARENTHESES ARE MANDATORY) */
/* var_debug(("outfd = %d, somefailed = %d\n", outfd, somefailed)); */
#define var_debug(x) do { if (DEBUG) { debug_vprintf ("%s:%d:%s(): ", \
    __FILE__,  __LINE__, __func__); debug_vprintf x; }} while (0)

/* var_dump("%s" variable_name); */
#define var_dump(fmt, var) do { if (DEBUG) { debug_vprintf ("%s:%d:%s(): ", \
    __FILE__,  __LINE__, __func__); debug_vprintf ("%s = " fmt, #var, var); }} while (0)

#define DEBUG_HERE do { if (DEBUG) { debug_vprintf ("%s:%d:%s(): HERE\n", \
    __FILE__,  __LINE__, __func__); }} while (0)

Hard links are very useful when doing incremental backups. See rsnapshot, for example. The idea is to do copy using hard links:

• copy backup number n to n + 1
• copy backup n - 1 to n
• ...
• copy backup 0 to backup 1
• update backup 0 with any changed files.

The new backup will not take up any extra space apart from any changes you've made, since all the incremental backups will point to the same set of inodes for files which haven't changed.

"%s%d%s%d\n" is the format string; it tells the printf function how to format and display the output. Anything in the format string that doesn't have a % immediately in front of it is displayed as is.

%s and %d are conversion specifiers; they tell printf how to interpret the remaining arguments. %s tells printf that the corresponding argument is to be treated as a string (in C terms, a 0-terminated sequence of char); the type of the corresponding argument must be char *. %d tells printf that the corresponding argument is to be treated as an integer value; the type of the corresponding argument must be int. Since you're coming from a Java background, it's important to note that printf (like other variadic functions) is relying on you to tell it what the types of the remaining arguments are. If the format string were "%d%s%d%s\n", printf would attempt to treat "Length of string" as an integer value and i as a string, with tragic results.

Please also check your encoding: Google encodes spaces as + instead of %20. This may result in an invalid image link.

In your Spring @Configuration class which extends WebMvcConfigurerAdapter override the method configureMessageConverters, for instance:

@Override
public void configureMessageConverters(List<HttpMessageConverter<?>> converters) {

    // http
    HttpMessageConverter converter = new StringHttpMessageConverter();
    converters.add(converter);
    logger.info("HttpMessageConverter added");

    // string
    converter = new FormHttpMessageConverter();
    converters.add(converter);
    logger.info("FormHttpMessageConverter added");

    // json
    converter = new MappingJackson2HttpMessageConverter();
    converters.add(converter);
    logger.info("MappingJackson2HttpMessageConverter added");

}

And the error will be gone.

$(document).ready(function(){ 
  $('#some-id').trigger('click'); 
});

did the trick.

Best practice is a real loaded term. I like a DbDataContext style container like Dapper.Rainbow promotes. It allows you to couple the CommandTimeout, transaction and other helpers.

For example:

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;

using Dapper;

// to have a play, install Dapper.Rainbow from nuget

namespace TestDapper
{
    class Program
    {
        // no decorations, base class, attributes, etc 
        class Product 
        {
            public int Id { get; set; }
            public string Name { get; set; }
            public string Description { get; set; }
            public DateTime? LastPurchase { get; set; }
        }

        // container with all the tables 
        class MyDatabase : Database<MyDatabase>
        {
            public Table<Product> Products { get; set; }
        }

        static void Main(string[] args)
        {
            var cnn = new SqlConnection("Data Source=.;Initial Catalog=tempdb;Integrated Security=True");
            cnn.Open();

            var db = MyDatabase.Init(cnn, commandTimeout: 2);

            try
            {
                db.Execute("waitfor delay '00:00:03'");
            }
            catch (Exception)
            {
                Console.WriteLine("yeah ... it timed out");
            }


            db.Execute("if object_id('Products') is not null drop table Products");
            db.Execute(@"create table Products (
                    Id int identity(1,1) primary key, 
                    Name varchar(20), 
                    Description varchar(max), 
                    LastPurchase datetime)");

            int? productId = db.Products.Insert(new {Name="Hello", Description="Nothing" });
            var product = db.Products.Get((int)productId);

            product.Description = "untracked change";

            // snapshotter tracks which fields change on the object 
            var s = Snapshotter.Start(product);
            product.LastPurchase = DateTime.UtcNow;
            product.Name += " World";

            // run: update Products set LastPurchase = @utcNow, Name = @name where Id = @id
            // note, this does not touch untracked columns 
            db.Products.Update(product.Id, s.Diff());

            // reload
            product = db.Products.Get(product.Id);


            Console.WriteLine("id: {0} name: {1} desc: {2} last {3}", product.Id, product.Name, product.Description, product.LastPurchase);
            // id: 1 name: Hello World desc: Nothing last 12/01/2012 5:49:34 AM

            Console.WriteLine("deleted: {0}", db.Products.Delete(product.Id));
            // deleted: True 


            Console.ReadKey();
        }
    }
}

Add this to your dependencies in build.gradle:

dependencies {
 implementation 'com.squareup.picasso:picasso:2.71828'
  ...

The latest version can be found here

Make sure you are connected to the Internet. When you sync Gradle, all related files will be added to your project

Take a look at your libraries folder, the library you just added should be in there.

Use JSON classes for parsing e.g

JSONObject mainObject = new JSONObject(Your_Sring_data);
JSONObject uniObject = mainObject.getJSONObject("university");
String  uniName = uniObject.getString("name");
String uniURL = uniObject.getString("url");

JSONObject oneObject = mainObject.getJSONObject("1");
String id = oneObject.getString("id");
....

wrap button inside <div class="text-xs-center">

<div class="text-xs-center">
  <v-btn primary>
    Signup
  </v-btn>
</div>

Dev uses it in his examples.

For centering buttons in v-card-actions we can add class="justify-center" (note in v2 class is text-center (so without xs):

<v-card-actions class="justify-center">
  <v-btn>
    Signup
  </v-btn>
</v-card-actions>

Codepen

For more examples with regards to centering see here

Since you've labeled the question C++, you might be interested in using boost::asio, ACE, or some other cross-platform socket library for C++ or for C. Some other cross-platform libraries may be found in the answers to C++ sockets library for cross-platform and Cross platform Networking API.

Assuming that using a third party cross-platform sockets library is not an option for you...

The header <sys/socket.h> is defined in IEEE Std. 1003.1 (POSIX), but sadly Windows is non-compliant with the POSIX standard. The MinGW compiler is a port of GCC for compiling Windows applications, and therefore does not include these POSIX system headers. If you install GCC using Cygwin, then it will include these system headers to emulate a POSIX environment on Windows. Be aware, however, that if you use Cygwin for sockets that a.) you will need to put the cygwin DLL in a place where your application can read it and b.) Cygwin headers and Windows headers don't interact very well (so if you plan on including windows.h, then you probably don't want to be including sys/socket.h).

My personal recommendation would be to download a copy of VirtualBox, download a copy of Ubuntu, install Ubuntu into VirtualBox, and then do your coding and testing on Ubuntu. Alternatively, I am told that Microsoft sells a "UNIX subsystem" and that it is pre-installed on certain higher-end editions of Windows, although I have no idea how compliant this system is (and, if it is compliant, with which edition of the UNIX standard it is compliant). Winsockets are also an option, although they can behave in subtly different ways than their POSIX counterparts, even though the signatures may be similar.

I had faced the same issue, because the jar library was copied by other Linux user(root), and the logged in user(process) did not have sufficient privilege to read the jar file content.

[function.fopen]: failed to open stream

If you have access to your php.ini file, try enabling Fopen. Find the respective line and set it to be "on": & if in wp e.g localhost/wordpress/function.fopen in the php.ini :

allow_url_fopen = off
should bee this 
allow_url_fopen = On

And add this line below it:
allow_url_include = off
should bee this 
allow_url_include = on

Just an update to above answers :

If you want to have see changes in the click event, i.e. Color of your UIVIew shud change whenever user clicks the UIView then make changes as below...

class ClickableUIView: UIView {
    override func touchesBegan(touches: Set<UITouch>, withEvent event: UIEvent?) {
            if let touch = touches.first {
                let currentPoint = touch.locationInView(self)
                // do something with your currentPoint
            }

            self.backgroundColor = UIColor.magentaColor()//Color when UIView is clicked.
        }

        override func touchesMoved(touches: Set<UITouch>, withEvent event: UIEvent?) {
            if let touch = touches.first {
                let currentPoint = touch.locationInView(self)
                // do something with your currentPoint
            }

            self.backgroundColor = UIColor.magentaColor()//Color when UIView is clicked.
        }

        override func touchesEnded(touches: Set<UITouch>, withEvent event: UIEvent?) {
            if let touch = touches.first {
                let currentPoint = touch.locationInView(self)
                // do something with your currentPoint
            }

            self.backgroundColor = UIColor.whiteColor()//Color when UIView is not clicked.

}//class closes here

Also, call this Class from Storyboard & ViewController as:

@IBOutlet weak var panVerificationUIView:ClickableUIView!

printf allows formatting with width specifiers. For example,

printf( "%-30s %s\n", "Starting initialization...", "Ok." );

You would use a negative width specifier to indicate left-justification because the default is to use right-justification.

for WORDPRESS:

global $wpdb;


$your_table  = $wpdb->prefix. 'My_Table_Name';
$your_column =                'My_Column_Name'; 

if (!in_array($your_column, $wpdb->get_col( "DESC " . $your_table, 0 ) )){  $result= $wpdb->query(
    "ALTER     TABLE $your_table     ADD $your_column     VARCHAR(100)     CHARACTER SET utf8     NOT NULL     "  //you can add positioning phraze: "AFTER My_another_column"
);}

For default tooltip behavior simply add the title attribute. This can't contain images though.

<div title="regular tooltip">Hover me</div>

Before you clarified the question I did this up in pure JavaScript, hope you find it useful. The image will pop up and follow the mouse.

jsFiddle

JavaScript

var tooltipSpan = document.getElementById('tooltip-span');

window.onmousemove = function (e) {
    var x = e.clientX,
        y = e.clientY;
    tooltipSpan.style.top = (y + 20) + 'px';
    tooltipSpan.style.left = (x + 20) + 'px';
};

CSS

.tooltip span {
    display:none;
}
.tooltip:hover span {
    display:block;
    position:fixed;
    overflow:hidden;
}

Extending for multiple elements

One solution for multiple elements is to update all tooltip span's and setting them under the cursor on mouse move.

jsFiddle

var tooltips = document.querySelectorAll('.tooltip span');

window.onmousemove = function (e) {
    var x = (e.clientX + 20) + 'px',
        y = (e.clientY + 20) + 'px';
    for (var i = 0; i < tooltips.length; i++) {
        tooltips[i].style.top = y;
        tooltips[i].style.left = x;
    }
};

#include<stdio.h>
#include<pthread.h>
void* myprint(void *x)
{
 int k = *((int *)x);
 printf("\n Thread created.. value of k [%d]\n",k);
 //k =11;
 pthread_exit((void *)k);

}
int main()
{
 pthread_t th1;
 int x =5;
 int *y;
 pthread_create(&th1,NULL,myprint,(void*)&x);
 pthread_join(th1,(void*)&y);
 printf("\n Exit value is [%d]\n",y);
}  

int min = 65;
int max = 80;

Random r = new Random();
int i1 = r.nextInt(max - min + 1) + min;

Note that nextInt(int max) returns an int between 0 inclusive and max exclusive. Hence the +1.

There are many ways. Here are at least five:

/*
 * An example of converting std::string to (const)char* using five
 * different methods. Error checking is emitted for simplicity.
 *
 * Compile and run example (using gcc on Unix-like systems):
 *
 *  $ g++ -Wall -pedantic -o test ./test.cpp
 *  $ ./test
 *  Original string (0x7fe3294039f8): hello
 *  s1 (0x7fe3294039f8): hello
 *  s2 (0x7fff5dce3a10): hello
 *  s3 (0x7fe3294000e0): hello
 *  s4 (0x7fe329403a00): hello
 *  s5 (0x7fe329403a10): hello
 */

#include <alloca.h>
#include <string>
#include <cstring>

int main()
{
    std::string s0;
    const char *s1;
    char *s2;
    char *s3;
    char *s4;
    char *s5;

    // This is the initial C++ string.
    s0 = "hello";

    // Method #1: Just use "c_str()" method to obtain a pointer to a
    // null-terminated C string stored in std::string object.
    // Be careful though because when `s0` goes out of scope, s1 points
    // to a non-valid memory.
    s1 = s0.c_str();

    // Method #2: Allocate memory on stack and copy the contents of the
    // original string. Keep in mind that once a current function returns,
    // the memory is invalidated.
    s2 = (char *)alloca(s0.size() + 1);
    memcpy(s2, s0.c_str(), s0.size() + 1);

    // Method #3: Allocate memory dynamically and copy the content of the
    // original string. The memory will be valid until you explicitly
    // release it using "free". Forgetting to release it results in memory
    // leak.
    s3 = (char *)malloc(s0.size() + 1);
    memcpy(s3, s0.c_str(), s0.size() + 1);

    // Method #4: Same as method #3, but using C++ new/delete operators.
    s4 = new char[s0.size() + 1];
    memcpy(s4, s0.c_str(), s0.size() + 1);

    // Method #5: Same as 3 but a bit less efficient..
    s5 = strdup(s0.c_str());

    // Print those strings.
    printf("Original string (%p): %s\n", s0.c_str(), s0.c_str());
    printf("s1 (%p): %s\n", s1, s1);
    printf("s2 (%p): %s\n", s2, s2);
    printf("s3 (%p): %s\n", s3, s3);
    printf("s4 (%p): %s\n", s4, s4);
    printf("s5 (%p): %s\n", s5, s5);

    // Release memory...
    free(s3);
    delete [] s4;
    free(s5);
}

... starting in Java SE 8, a local class can access local variables and parameters of the enclosing block that are final or effectively final. A variable or parameter whose value is never changed after it is initialized is effectively final.

For example, suppose that the variable numberLength is not declared final, and you add the marked assignment statement in the PhoneNumber constructor:

public class OutterClass {  

  int numberLength; // <== not *final*

  class PhoneNumber {

    PhoneNumber(String phoneNumber) {
        numberLength = 7;   // <== assignment to numberLength
        String currentNumber = phoneNumber.replaceAll(
            regularExpression, "");
        if (currentNumber.length() == numberLength)
            formattedPhoneNumber = currentNumber;
        else
            formattedPhoneNumber = null;
     }

  ...

  }

...

}

Because of this assignment statement, the variable numberLength is not effectively final anymore. As a result, the Java compiler generates an error message similar to "local variables referenced from an inner class must be final or effectively final" where the inner class PhoneNumber tries to access the numberLength variable:

http://codeinventions.blogspot.in/2014/07/difference-between-final-and.html

http://docs.oracle.com/javase/tutorial/java/javaOO/localclasses.html

Like as has been said already, location is an object. But that person suggested using either. But, you will do better to use the .href version.

Objects have default properties which, if nothing else is specified, they are assumed. In the case of the location object, it has a property called .href. And by not specifying ANY property during the assignment, it will assume "href" by default.

If you mean href, you should specify href.

The short answer is: if you're a beginner in C++, you should never be using new or delete yourself.

Instead, you should use smart pointers such as std::unique_ptr and std::make_unique (or less often, std::shared_ptr and std::make_shared). That way, you don't have to worry nearly as much about memory leaks. And even if you're more advanced, best practice would usually be to encapsulate the custom way you're using new and delete into a small class (such as a custom smart pointer) that is dedicated just to object lifecycle issues.

Of course, behind the scenes, these smart pointers are still performing dynamic allocation and deallocation, so code using them would still have the associated runtime overhead. Other answers here have covered these issues, and how to make design decisions on when to use smart pointers versus just creating objects on the stack or incorporating them as direct members of an object, well enough that I won't repeat them. But my executive summary would be: don't use smart pointers or dynamic allocation until something forces you to.

I created a symlink for src/components -> ../../components that caused npm start to go nuts and stop interpreting src/components/*.js as jsx, thus giving that same error. All instructions to fix it from official babel were useless. When I copied back the components directory everything was BACK TO NORMAL!

public boolean getcheckboxvalue(String element)
    {   
        WebElement webElement=driver.findElement(By.xpath(element));
        return webElement.isSelected();
    }

If you want to catch the focus event dynamiclly on every input on your component :

import { AfterViewInit, Component, ElementRef } from '@angular/core';

@Component({
  selector: 'my-app',
  templateUrl: './app.component.html',
  styleUrls: [ './app.component.css' ]
})
export class AppComponent implements AfterViewInit {

  constructor(private el: ElementRef) {
  }

  ngAfterViewInit() {
       // document.getElementsByTagName('input') : to gell all Docuement imputs
       const inputList = [].slice.call((<HTMLElement>this.el.nativeElement).getElementsByTagName('input'));
        inputList.forEach((input: HTMLElement) => {
            input.addEventListener('focus', () => {
                input.setAttribute('placeholder', 'focused');
            });
            input.addEventListener('blur', () => {
                input.removeAttribute('placeholder');
            });
        });
    }
}

Checkout the full code here : https://stackblitz.com/edit/angular-93jdir

If you just want to list all the sites (ie. to find a binding)

Change the working directory to "C:\Windows\system32\inetsrv"

cd c:\Windows\system32\inetsrv

Next run "appcmd list sites" (plural) and output to a file. e.g c:\IISSiteBindings.txt

appcmd list sites > c:\IISSiteBindings.txt

Now open with notepad from your command prompt.

notepad c:\IISSiteBindings.txt

There is no error in the, but the mysqli PHP extension is not installed on your machine. Please contact your service provider to fix this issue.

They're two different ways of representing data, but they're pretty dissimilar. The wikipedia pages for JSON and XML give some examples of each, and there's a comparison paragraph

All of this can easily be acheived in the xaml by adding the following code in the grid

<Grid>
    <Grid.Background>  
        <ImageBrush ImageSource="/MyProject;component/Images/bg.png"/>     
    </Grid.Background>
</Grid>

Left for you to do, is adding a folder to the solution called 'Images' and adding an existing file to your new 'Images' folder, in this case called 'bg.png'

These instructions worked for me on apache-tomcat-8.5.20 on mac os 10.13.3 using jdk1.8.0_152:

$ cd /path/to/apache-tomcat-8.5.20/bin
$ export JPDA_ADDRESS="localhost:12321"
$ ./catalina.sh jpda run

Now connect to port 12321 from IntelliJ/Eclipse and enjoy remote debugging.

iterating using iterator is not fail-safe for example if you add element to the collection after iterator's creation then it will throw concurrentmodificaionexception. Also it's not thread safe, you have to make it thread safe externally.

So it's better to use for-each structure of for loop. It's atleast fail-safe.

None of the other solutions worked in my situation:

AspNetCore dependencies had been installed/uninstalled and were being cached. 'AspNetCore.All' would refuse to properly update/reinstall/remove. And regardless of what i did, it would use the cached dependencies (that it was not compatible with), because they were a higher version.

1. Backup Everything. Note the list of Dependencies you'll need to reinstall, Exit VisualStudio
2. Open up all .proj files in a text editor and remove all PackageReference
3. In each project, delete the bin, obj folders
4. Delete any "packages" folders you find in the solution.
5. Open solution, go into Tools > Nuget Package Manager > Package Manager Settings and Clear all Nuget caches. Check the console because it may fail to remove some items - copy the folder path and exit visual studio.
6. Delete anything from that folder Reopen solution and start installing nuget packages again from scratch.

If that still doesn't work, repeat but also search your drive in windows explorer for nuget and delete anything cachey looking.

The PRIMARY KEY constraint uniquely identifies each record in a database table. Primary keys must contain UNIQUE values and column cannot contain NULL Values.

  -- DROP current primary key 
  ALTER TABLE tblPersons DROP CONSTRAINT <constraint_name>
  Example:
  ALTER TABLE tblPersons 
  DROP CONSTRAINT P_Id;


  -- ALTER TABLE tblpersion
  ALTER TABLE tblpersion add primary key (P_Id,LastName)

There is a constant that you can check against:

someBigDecimal.compareTo(BigDecimal.ZERO) == 0

According to Alexis King answer, here is a plain JavaScript version.

function cleanUp(obj) {_x000D_
    for (var attrKey in obj) {_x000D_
        var attrValue = obj[attrKey];_x000D_
        if (attrValue === null || attrValue === "") {_x000D_
            delete obj[attrKey];_x000D_
        } else if (Object.prototype.toString.call(attrValue) === "[object Object]") {_x000D_
            cleanUp(attrValue);_x000D_
        } else if (Array.isArray(attrValue)) {_x000D_
            attrValue.forEach(function (arrayValue) {_x000D_
                cleanUp(arrayValue);_x000D_
            });_x000D_
        }_x000D_
    }_x000D_
}

The easiest way to get a new list would be:

List<long> unique = longs.Distinct().ToList();

Is that good enough for you, or do you need to mutate the existing list? The latter is significantly more long-winded.

Note that Distinct() isn't guaranteed to preserve the original order, but in the current implementation it will - and that's the most natural implementation. See my Edulinq blog post about Distinct() for more information.

If you don't need it to be a List<long>, you could just keep it as:

IEnumerable<long> unique = longs.Distinct();

At this point it will go through the de-duping each time you iterate over unique though. Whether that's good or not will depend on your requirements.

Those things are Compiler- and Platform-specific. Neither the C nor the C++ standard say anything about calling conventions except for extern "C" in C++.

how does a caller know if it should free up the stack ?

The caller knows the calling convention of the function and handles the call accordingly.

At the call site, does the caller know if the function being called is a cdecl or a stdcall function ?

Yes.

How does it work ?

It is part of the function declaration.

How does the caller know if it should free up the stack or not ?

The caller knows the calling conventions and can act accordingly.

Or is it the linkers responsibility ?

No, the calling convention is part of a function's declaration so the compiler knows everything it needs to know.

If a function which is declared as stdcall calls a function(which has a calling convention as cdecl), or the other way round, would this be inappropriate ?

No. Why should it?

In general, can we say that which call will be faster - cdecl or stdcall ?

I don't know. Test it.

This uses git's internal difftool. Maybe a little work to do but straight forward.

#First checkout the branch you want to merge into
git checkout <branch_to_merge_into>
    
#Then checkout the file from the branch you want to merge from
git checkout <branch_to_merge_from> -- <file> 
    
#Then you have to unstage that file to be able to use difftool
git reset HEAD <file> 

#Now use difftool to chose which lines to keep. Click on the mergebutton in difftool
git difftool

#Save the file in difftool and you should be done.

I think you can use the Application class for many things, but they are all tied to your need to do some stuff BEFORE any of your Activities or Services are started. For instance, in my application I use custom fonts. Instead of calling

Typeface.createFromAsset()

from every Activity to get references for my fonts from the Assets folder (this is bad because it will result in memory leak as you are keeping a reference to assets every time you call that method), I do this from the onCreate() method in my Application class:

private App appInstance;
Typeface quickSandRegular;
...
public void onCreate() {
    super.onCreate();

    appInstance = this;
    quicksandRegular = Typeface.createFromAsset(getApplicationContext().getAssets(),
                       "fonts/Quicksand-Regular.otf");
   ...
   }

Now, I also have a method defined like this:

public static App getAppInstance() {
    return appInstance;
}

and this:

public Typeface getQuickSandRegular() {
    return quicksandRegular;
}

So, from anywhere in my application, all I have to do is:

App.getAppInstance().getQuickSandRegular()

Another use for the Application class for me is to check if the device is connected to the Internet BEFORE activities and services that require a connection actually start and take necessary action.

Here documents are often used for this purpose.

cat << EOF
usage: up [--level <n>| -n <levels>][--help][--version]

Report bugs to: 
up home page:
EOF

They are supported in all Bourne-derived shells including all versions of Bash.

RESTful Resource controller

A RESTful resource controller sets up some default routes for you and even names them.

Route::resource('users', 'UsersController');

Gives you these named routes:

Verb          Path                        Action  Route Name
GET           /users                      index   users.index
GET           /users/create               create  users.create
POST          /users                      store   users.store
GET           /users/{user}               show    users.show
GET           /users/{user}/edit          edit    users.edit
PUT|PATCH     /users/{user}               update  users.update
DELETE        /users/{user}               destroy users.destroy

And you would set up your controller something like this (actions = methods)

class UsersController extends BaseController {

    public function index() {}

    public function show($id) {}

    public function store() {}

}

You can also choose what actions are included or excluded like this:

Route::resource('users', 'UsersController', [
    'only' => ['index', 'show']
]);

Route::resource('monkeys', 'MonkeysController', [
    'except' => ['edit', 'create']
]);

API Resource controller

Laravel 5.5 added another method for dealing with routes for resource controllers. API Resource Controller acts exactly like shown above, but does not register create and edit routes. It is meant to be used for ease of mapping routes used in RESTful APIs - where you typically do not have any kind of data located in create nor edit methods.

Route::apiResource('users', 'UsersController');

RESTful Resource Controller documentation

Implicit controller

An Implicit controller is more flexible. You get routed to your controller methods based on the HTTP request type and name. However, you don't have route names defined for you and it will catch all subfolders for the same route.

Route::controller('users', 'UserController');

Would lead you to set up the controller with a sort of RESTful naming scheme:

class UserController extends BaseController {

    public function getIndex()
    {
        // GET request to index
    }

    public function getShow($id)
    {
        // get request to 'users/show/{id}'
    }

    public function postStore()
    {
        // POST request to 'users/store'
    }

}

Implicit Controller documentation

It is good practice to use what you need, as per your preference. I personally don't like the Implicit controllers, because they can be messy, don't provide names and can be confusing when using php artisan routes. I typically use RESTful Resource controllers in combination with explicit routes.

It's a ternary operator, or the short form for if..else.

condition ? value if true : value if false

See Microsoft Docs | ?: operator (C# reference).

Creating a dictionary as it has mentioned, but in this case each key has the name of the object name that you want to create. Then the value is set as the class you want to instantiate, see for example:

class MyClass:
   def __init__(self, name):
       self.name = name
       self.checkme = 'awesome {}'.format(self.name)
...

instanceNames = ['red', 'green', 'blue']

# Here you use the dictionary
holder = {name: MyClass(name=name) for name in instanceNames}

Then you just call the holder key and you will have all the properties and methods of your class available for you.

holder['red'].checkme

output:

'awesome red'

Using the solution of Jacek Milewski I made an oriented down angle with a transparent background.

<?xml version="1.0" encoding="utf-8"?>
<layer-list xmlns:android="http://schemas.android.com/apk/res/android">
    <item>
        <rotate
            android:fromDegrees="135"
            android:pivotX="65%"
            android:pivotY="20%"
            android:toDegrees="135"
            >
            <shape android:shape="rectangle">
                <stroke
                    android:width="1dp"
                    android:color="@color/blue"
                    />
                <solid android:color="@color/transparent" />
            </shape>
        </rotate>
    </item>
</layer-list>

You can change android:pivotX and android:pivotY to shift the angle.

Usage:

<ImageView
    android:layout_width="10dp"
    android:layout_height="10dp"
    android:src="@drawable/ic_angle_down"
    />

Parameters depend on the size of the image. For instance, if ImageView has size 100dp*80dp, you should use these constants:

<rotate
    android:fromDegrees="135"
    android:pivotX="64.5%"
    android:pivotY="19%"
    android:toDegrees="135"
    >

One approach is to resize the UIImage in code like the following. Note: this code only scales by height, but you can easily adjust the function to scale by width as well.

let targetHeight = CGFloat(28)
let newImage = resizeImage(image: UIImage(named: "Image.png")!, targetHeight: targetHeight)
button.setImage(newImage, for: .normal)

fileprivate func resizeImage(image: UIImage, targetHeight: CGFloat) -> UIImage {
    // Get current image size
    let size = image.size

    // Compute scaled, new size
    let heightRatio = targetHeight / size.height
    let newSize = CGSize(width: size.width * heightRatio, height: size.height * heightRatio)
    let rect = CGRect(x: 0, y: 0, width: newSize.width, height: newSize.height)

    // Create new image
    UIGraphicsBeginImageContextWithOptions(newSize, false, 0)
    image.draw(in: rect)
    let newImage = UIGraphicsGetImageFromCurrentImageContext()
    UIGraphicsEndImageContext()

    // Return new image
    return newImage!
}

// in component.ts
checked: boolean = true;
indeterminate:boolean = false;
disabled:boolean = false;
label:string;

onCheck() {
    this.label = this.checked?'ON':'OFF';
}

// in component.html`enter code here`
<mat-checkbox class="example-margin" [color]="primary" [(ngModel)]="checked" [(indeterminate)]="indeterminate" [labelPosition]="after" [disabled]="disabled" (change)="onCheck()">
                    {{label}}
                  </mat-checkbox>

The above code should work fine. Mat checkbox allows you to make it checked/unchecked, disabled, set indeterminate state, do some operation onChange of the state etc. Refer API for more details.

Response.Redirect(Request.Url.ToString());

Sometimes is worth to remove new line characters \n like:

conn.exec <<-eos.squish
 select attr1, attr2, attr3, attr4, attr5, attr6, attr7
 from table1, table2, table3, etc, etc, etc, etc, etc,
 where etc etc etc etc etc etc etc etc etc etc etc etc etc
eos

The problem with ordering the other way is that it often does not make good use of indices. It is also not very extendable if you ever need to select a number of rows that are not at the start or the end. An alternative way is as follows.

DECLARE @NumberOfRows int;
SET @NumberOfRows = (SELECT COUNT(*) FROM TheTable);

SELECT col1, col2,...
FROM (
    SELECT col1, col2,..., ROW_NUMBER() OVER (ORDER BY col1) AS intRow
    FROM TheTable
) AS T
WHERE intRow > @NumberOfRows - 20;

If you're using .NET 4 or above and you don't want to reference System.Web, you can use WebUtility.HtmlEncode from System

var encoded = WebUtility.HtmlEncode(unencoded);

This has the same effect as HttpUtility.HtmlEncode and should be preferred over System.Security.SecurityElement.Escape.

I was missing a React Fragment:

function Bar({ children }) {

  return (
    <div>
     {children}
    </div>
  );
}

function Foo() {
  return (
    <Bar>
      <Baz/>
      <Qux/>
    </Bar>
  );
}

The code above throws the error above. But this fixes it:

<Bar>
  <>
    <Baz/>
    <Qux/>
  </>
</Bar>

Try Build > Clean Solution, then Build > Build Solution. This works for me.

I wanted to share with you my solution to export a database with Microsoft SQL Server Management Studio.

To Export your database

1. Open a new request
2. Copy paste this script

DECLARE @BackupFile NVARCHAR(255);
SET @BackupFile = 'c:\database-backup_2020.07.22.bak';
PRINT @BackupFile;
BACKUP DATABASE [%databaseName%] TO DISK = @BackupFile;

Don't forget to replace %databaseName% with the name of the database you want to export.

Note that this method gives a lighter file than from the menu.

To import this file from SQL Server Management Studio. Don't forget to delete your database beforehand.

1. Click restore database

2. Add the backup file

3. Validate

Enjoy! :) :)

Possible Channel-Specific Issue

I had this issue (again) and it turned out I installed from the conda-forge channel; removing it and reinstalling from anaconda channel instead fixed it for me.

Update: I again had the same problem with a new env, this time I did install nb_conda_kernels from anaconda channel, but my jupyter_client was from the conda-forge channel. Uninstalling nb_conda_kernels and reinstalling updated that to a higher-priority channel.

So make sure you've installed from the correct channels :)

This can be done with a simple magic like this:

$(":first-child", element).toggleClass("redClass");

Reference: http://www.snoopcode.com/jquery/jquery-first-child-selector

Edit your conftest.py and add following lines of code:

import os, sys
sys.path.insert(0, os.path.abspath(os.path.join(os.path.dirname(file), '..')))

And if trying to run the test case through terminal, use following ex:

python -m pytest test_some_step_file_steps.py --html=HTML_step_file_output.html --self-contained-html

Because of double print function. I suggest you to use return instead of print inside the function definition.

def lyrics():
    return "The very first line"
print(lyrics())

OR

def lyrics():
    print("The very first line")
lyrics()

You'll need to get a compiler. The easiest way is probably to install XCode development environment from the CDs/DVDs you got with your Mac, which will give you gcc. Then you should be able compile it like

gcc -o mybinaryfile mysourcefile.c

Question has a good pagerank on google, so for anyone who's looking for answer to this question this might be helpful.

There is an extension in google chrome marketspace to do exactly that: https://chrome.google.com/webstore/detail/hccmhjmmfdfncbfpogafcbpaebclgjcp

Place an asterisk(*) at the end of the destination path to skip the dispute of D and F.

Example:

xcopy "compressedOutput.xml" "../../Execute Scripts/APIAutomation/Libraries/rerunlastfailedbuild.xml*"

You don't need to fiddle around with any command :)

Once the XCode is updated, open the Xcode IDE program. Please accept terms and conditions.

You are all set to go :))

 Intent intent = new Intent(activity1.this, activity2.class);
 intent.putExtra("message", message);
 startActivity(intent);

In activity2, in onCreate(), you can get the String message by retrieving a Bundle (which contains all the messages sent by the calling activity) and call getString() on it :

  Bundle bundle = getIntent().getExtras();
  String message = bundle.getString("message");

easier answer - put the stuff in quotes in different cells and then concatenate them!

B1: rcrCheck.asp
C1: =D1&B1&E1
D1: "code in quotes" and "more code in quotes"  
E1: "

it comes out perfect (can't show you because I get a stupid dialog box about code)

easy peasy!!

Try:

function LoadData (callback)
{
    // ... Process whatever data
    callback (loadedData, currentObject);
}

Functions are first class in JavaScript; you can just pass them around.

Real simple. You just need to have the string 'selected' added to the right option. In the following code, ${myBean.foo == val ? 'selected' : ' '} will add the string 'selected' if the option's value is the same as the bean value;

<select name="foo" id="foo" value="${myBean.foo}">
    <option value="">ALL</option>
    <c:forEach items="${fooList}" var="val"> 
        <option value="${val}" ${myBean.foo == val ? 'selected' : ' '}><c:out value="${val}" ></c:out></option>   
    </c:forEach>                     
</select>

Best way i learnt is using express with html files as express gives lots of advantage. Also you can extend it to a Heroku platform if you want..Just saying :)

var express = require("express");
var app     = express();
var path    = require("path");


app.get('/',function(req,res){
  res.sendFile(path.join(__dirname+'/index.html'));
});

app.listen(3000);



console.log("Running at Port 3000");

Clean and best..!!!

var input = "12342";
var output = input.Substring(0, input.Length - 1); 

or

var output = input.Remove(input.Length - 1);

From Eclipsepedia on how to set a conditional breakpoint:

First, set a breakpoint at a given location. Then, use the context menu on the breakpoint in the left editor margin or in the Breakpoints view in the Debug perspective, and select the breakpoint’s properties. In the dialog box, check Enable Condition, and enter an arbitrary Java condition, such as list.size()==0. Now, each time the breakpoint is reached, the expression is evaluated in the context of the breakpoint execution, and the breakpoint is either ignored or honored, depending on the outcome of the expression.

Conditions can also be expressed in terms of other breakpoint attributes, such as hit count.

Clearly HttpContext.Current is not null only if you access it in a thread that handles incoming requests. That's why it works "when i use this code in another class of a page".

It won't work in the scheduling related class because relevant code is not executed on a valid thread, but a background thread, which has no HTTP context associated with.

Overall, don't use Application["Setting"] to store global stuffs, as they are not global as you discovered.

If you need to pass certain information down to business logic layer, pass as arguments to the related methods. Don't let your business logic layer access things like HttpContext or Application["Settings"], as that violates the principles of isolation and decoupling.

Update: Due to the introduction of async/await it is more often that such issues happen, so you might consider the following tip,

In general, you should only call HttpContext.Current in only a few scenarios (within an HTTP module for example). In all other cases, you should use

• Page.Context https://docs.microsoft.com/en-us/dotnet/api/system.web.ui.page.context?view=netframework-4.7.2
• Controller.HttpContext https://docs.microsoft.com/en-us/dotnet/api/system.web.mvc.controller.httpcontext?view=aspnet-mvc-5.2

instead of HttpContext.Current.

If you want to delete manually (for me it was easier), follow this:

Let's get this example with "teste".

1 - First change the explorer to "project" and open "settings.gradle";

2 - Delete the module you want;

3 - Go to your root folder of your project and delete the module folder.

On a Mac, credentials are stored in Keychain Access. Look for Github and remove that credential. More info: https://help.github.com/articles/updating-credentials-from-the-osx-keychain/

Try loading your javascript after.

Try this:

<h2>Hello World!</h2>
<p id="myParagraph">This is an example website</p>

<form>
  <input type="text" id="myTextfield" placeholder="Type your name" />
  <input type="submit" id="myButton" value="Go" />
</form>

<script src="js/script.js" type="text/javascript"></script>

You can checkout Angular UI @ http://angular-ui.github.io/ui-utils/ which provide details event handle callback function for detecting keydown,keyup,keypress (also Enter key, backspace key, alter key ,control key)

<textarea ui-keydown="{27:'keydownCallback($event)'}"></textarea>
<textarea ui-keypress="{13:'keypressCallback($event)'}"></textarea>
<textarea ui-keydown="{'enter alt-space':'keypressCallback($event)'}"> </textarea>
<textarea ui-keyup="{'enter':'keypressCallback($event)'}"> </textarea>

You could try using the below extension method:

public static T? GetValueOrNull<T>(this string valueAsString)
    where T : struct 
{
    if (string.IsNullOrEmpty(valueAsString))
        return null;
    return (T) Convert.ChangeType(valueAsString, typeof(T));
}

This way you can do this:

double? amount = strAmount.GetValueOrNull<double>();
int? amount = strAmount.GetValueOrNull<int>();
decimal? amount = strAmount.GetValueOrNull<decimal>();

For most it is a breeze, however like you I had a difficult time installing jq

The best resources I found are: https://stedolan.github.io/jq/download/ and http://macappstore.org/jq/

However neither worked for me. I run python 2 & 3, and use brew in addition to pip, as well as Jupyter. I was only successful after brew uninstall jq then updating brew and rebooting my system

What worked for me was removing all previous installs then pip install jq

In the last version of spring boot 2.1.1.RELEASE, it is simple as :

@RunWith(SpringRunner.class)
@SpringBootTest(classes = SampleApplication.class)
public class CustomerRepositoryIntegrationTest {

    @Autowired
    CustomerRepository repository;

    @Test
    public void myTest() throws Exception {

        Customer customer = new Customer();
        customer.setId(100l);
        customer.setFirstName("John");
        customer.setLastName("Wick");

        repository.save(customer);

        List<?> queryResult = repository.findByLastName("Wick");

        assertFalse(queryResult.isEmpty());
        assertNotNull(queryResult.get(0));
    }
}

Complete code:

https://github.com/jrichardsz/spring-boot-templates/blob/master/003-hql-database-with-integration-test/src/test/java/test/CustomerRepositoryIntegrationTest.java

On Click event On webView works in onTouch like this:

imagewebViewNewsChart.setOnTouchListener(new View.OnTouchListener(){

  @Override   
  public boolean onTouch(View v, MotionEvent event) { 
    if (event.getAction()==MotionEvent.ACTION_MOVE){                        
       return false;     
    }

    if (event.getAction()==MotionEvent.ACTION_UP){    
        startActivity(new Intent(this,Example.class));                

    } 

    return false;                 
  }                       
});

You can also use vbNewLine Object as in

MessageLabel.Text = "The Sales tax was:" & Format(douSales_tax, "Currency") & "." & vbNewLine & "The sale person: " & mstrSalesPerson

vim may be challenging for beginners. For a quick-and-dirty Windows console-mode text editor, I would suggest Kinesics Text Editor.

Most browsers will simply ignore any NON-hex values in your color string, substituting non-hex digits with zeros.

ChuCknorris translates to c00c0000000. At this point, the browser will divide the string into three equal sections, indicating Red, Green and Blue values: c00c 0000 0000. Extra bits in each section will be ignored, which makes the final result #c00000 which is a reddish color.

Note, this does not apply to CSS color parsing, which follow the CSS standard.

<p><font color='chucknorris'>Redish</font></p>_x000D_
<p><font color='#c00000'>Same as above</font></p>_x000D_
<p><span style="color: chucknorris">Black</span></p>

I know this is theoretically off-topic, but practically very on-topic for people landing here from a Google search.

When in doubt, you can always use the Github interface to create a pull-request and check if it indicates a clean merge is possible.

Try this:

ImageIcon icon = new ImageIcon(UrlToPngFile);
Image scaleImage = icon.getImage().getScaledInstance(28, 28,Image.SCALE_DEFAULT);

I also saw another style:

>>> django.VERSION
(1, 1, 0, 'final', 0)

If you want to update/replace the values of first dataframe df1 with the values of second dataframe df2. you can do it by following steps —

Step 1: Set index of the first dataframe (df1)

df1.set_index('id')

Step 2: Set index of the second dataframe (df2)

df2.set_index('id')

and finally update the dataframe using the following snippet —

df1.update(df2)

This solution is without height/width specification for the father div so it will be responsive to window resizing and most useful cause horizontal scrollbars appears just if needed.

.container{
    padding:20px;
    border:dotted 1px;
    white-space:nowrap;
    overflow-x:auto;
}

.box{
    width:100px;
    height:180px;
    background-color: red;
    margin:10px;
    display:inline-block
}

Take a look at DEMO

right click on project->properties->android->select target name --set target-- click ok

table.foobar
{
   padding:30px; /* if border is not collapsed */
}

or 

table.foobar
{
   border-spacing:0;
}
table.foobar>tbody
{
   display:table;
   border-spacing:0; /* or other preferred */
   border:30px solid transparent; /* 30px is the "padding" */
}

Works in Firefox, Chrome, IE11, Edge.

If you want to print wall cell execution time here is a trick, use

%%time
<--code goes here-->

but here make sure that, the %%time is a magic function, so put it at first line in your code.

if you put it after some line of your code it's going to give you usage error and not gonna work.

Here some possibilities of single and double quotes with variable

$world = "world";

"Hello '.$world.' ";

'hello ".$world."';

Yahoo is the simplest option to get preliminary free data. The link described in eckesicle's answer could be easily used in a python code, but you first need all the tickers. I'd use the NYSE for this example, but this can be used for different exchanges as well.

I used this wiki page to download all company tickers with the following script (I'm not a very talented Pythonist, sorry if this code isn't very efficient):

import string
import urllib2
from bs4 import BeautifulSoup

global f

def download_page(url):
    aurl = urllib2.urlopen(url)
    soup = BeautifulSoup(aurl.read())

    print url

    for row in soup('table')[1]('tr'):
        tds = row('td')
        if (len(tds) > 0):
            f.write(tds[1].string + '\n')


f = open('stock_names.txt', 'w')

url_part1 = 'http://en.wikipedia.org/wiki/Companies_listed_on_the_New_York_Stock_Exchange_'
url = url_part1 + '(0-9)'
download_page(url)

for letter in string.uppercase[:26]:
    url_part2 = letter
    url = url_part1 + '(' + letter + ')'

    download_page(url)

f.close()

For downloading each ticker I used another quite similar script:

import string
import urllib2
from bs4 import BeautifulSoup


global f

url_part1 = 'http://ichart.finance.yahoo.com/table.csv?s='
url_part2 = '&d=0&e=28&f=2010&g=d&a=3&b=12&c=1996&ignore=.csv'

print "Starting"

f = open('stock_names.txt', 'r')
file_content = f.readlines()
count = 1;
print "About %d tickers will be downloaded" % len(file_content)

for ticker in file_content:
    ticker = ticker.strip()
    url = url_part1 + ticker + url_part2
    
    try:
        # This will cause exception on a 404
        response = urllib2.urlopen(url)

        print "Downloading ticker %s (%d out of %d)" % (ticker, count, len(file_content))

        count = count + 1
        history_file = open('C:\\Users\\Nitay\\Desktop\\Historical Data\\' + ticker + '.csv', 'w')
        history_file.write(response.read())
        history_file.close()

    except Exception, e:
        pass

f.close()

Notice that the major downside to this method is that different data is available for different companies - Companies that don't have data existing in the requested dates (newly listed) will get you a 404 page.

Also keep in mind that this method is only good for preliminary data - If you really want to test your algorithm you should pay a bit and use a trusted data supplier like CSIData or others

Not the most readable solution, but you can mix the result from a value-of with plain text:

<a>
  <xsl:attribute name="href"> 
    Text<xsl:value-of select="/*/properties/property[@name='report']/@value"/>Text
  </xsl:attribute>
</a>

Here is a quick summary of the order characteristics of the standard Set implementations available in Java:

1. keep the insertion order: LinkedHashSet and CopyOnWriteArraySet (thread-safe)
2. keep the items sorted within the set: TreeSet, EnumSet (specific to enums) and ConcurrentSkipListSet (thread-safe)
3. does not keep the items in any specific order: HashSet (the one you tried)

For your specific case, you can either sort the items first and then use any of 1 or 2 (most likely LinkedHashSet or TreeSet). Or alternatively and more efficiently, you can just add unsorted data to a TreeSet which will take care of the sorting automatically for you.

You can use DISTINCT inside the COUNT like what milkovsky said

in my case:

select COUNT(distinct user_id) from answers_votes where answer_id in (694,695);

This will pull the count of answer votes considered the same user_id as one count

I don't think you can make VS wrap at 80 columns (I'd find that terribly annoying) but you can insert a visual guideline at 80 columns so you know when is a good time to insert a newline.

Details on inserting a guideline at 80 characters for 3 different versions of visual studio.

Or if you are collecting many numbers, use a loop

num = []
for i in xrange(1, 10):
    num.append(raw_input('Enter the %s number: '))

print num

To build on @Livven's answer, here are some useful combinations.

1. variable substitution, leading tab retained, overwrite file, echo to stdout

   tee /path/to/file <<EOF
   ${variable}
   EOF
   

2. no variable substitution, leading tab retained, overwrite file, echo to stdout

   tee /path/to/file <<'EOF'
   ${variable}
   EOF
   

3. variable substitution, leading tab removed, overwrite file, echo to stdout

   tee /path/to/file <<-EOF
       ${variable}
   EOF
   

4. variable substitution, leading tab retained, append to file, echo to stdout

   tee -a /path/to/file <<EOF
   ${variable}
   EOF
   

5. variable substitution, leading tab retained, overwrite file, no echo to stdout

   tee /path/to/file <<EOF >/dev/null
   ${variable}
   EOF
   

6. the above can be combined with sudo as well

   sudo -u USER tee /path/to/file <<EOF
   ${variable}
   EOF
   

Steps as of Chrome v79 (2/24/2020):

1. Click the (i) button next to the URL

2. Click Site settings on the popup box

3. At the bottom of the list is "Insecure content", change this to Allow

4. Go back to the site and Refresh the page

Older Chrome Versions:

timmmy_42 answers this on: https://productforums.google.com/forum/#!topic/chrome/OrwppKWbKnc

In the address bar at the right end should be a 'shield' icon, you can click on that to run insecure content.

This worked for me in Chromium-dev Version 36.0.1933.0 (262849).

Once you've dropped all the tables (and the indexes will disappear when the table goes) then there's nothing left in a SQLite database as far as I know, although the file doesn't seem to shrink (from a quick test I just did).

So deleting the file would seem to be fastest - it should just be recreated when your app tries to access the db file.

Remember if you want to give Text a backgroundcolor and then also borderRadius in that case also write overflow:'hidden' your text having a background colour will also get the radius otherwise it's impossible to achieve until unless you wrap it with View and give backgroundcolor and radius to it.

<Text style={{ backgroundColor: 'black', color:'white', borderRadius:10, overflow:'hidden'}}>Dummy</Text>

The only way to control the size of stack within process is start a new Thread. But you can also control by creating a self-calling sub Java process with the -Xss parameter.

public class TT {
    private static int level = 0;

    public static long fact(int n) {
        level++;
        return n < 2 ? n : n * fact(n - 1);
    }

    public static void main(String[] args) throws InterruptedException {
        Thread t = new Thread(null, null, "TT", 1000000) {
            @Override
            public void run() {
                try {
                    level = 0;
                    System.out.println(fact(1 << 15));
                } catch (StackOverflowError e) {
                    System.err.println("true recursion level was " + level);
                    System.err.println("reported recursion level was "
                            + e.getStackTrace().length);
                }
            }

        };
        t.start();
        t.join();
        try {
            level = 0;
            System.out.println(fact(1 << 15));
        } catch (StackOverflowError e) {
            System.err.println("true recursion level was " + level);
            System.err.println("reported recursion level was "
                    + e.getStackTrace().length);
        }
    }

}

I had the same error message but the solution is different.

The compiler parses the file from top to bottom.

Make sure a struct is defined BEFORE using it into another:

typedef struct
{
    char name[50];
    wheel_t wheels[4]; //wrong, wheel_t is not defined yet
} car_t;

typedef struct
{
    int weight;
} wheel_t;

If You are looking list of methods which respond by an instance (in your case @current_user). According to ruby documentation methods

Returns a list of the names of public and protected methods of obj. This will include all the methods accessible in obj's ancestors. If the optional parameter is false, it returns an array of obj's public and protected singleton methods, the array will not include methods in modules included in obj.

@current_user.methods
@current_user.methods(false) #only public and protected singleton methods and also array will not include methods in modules included in @current_user class or parent of it.

Alternatively, You can also check that a method is callable on an object or not?.

@current_user.respond_to?:your_method_name

If you don't want parent class methods then just subtract the parent class methods from it.

@current_user.methods - @current_user.class.superclass.new.methods #methods that are available to @current_user instance.

There is a jQuery plugin for the general case of scrolling to a DOM element, but if performance is an issue (and when is it not?), I would suggest doing it manually. This involves two steps:

1. Finding the position of the element you are scrolling to.
2. Scrolling to that position.

quirksmode gives a good explanation of the mechanism behind the former. Here's my preferred solution:

function absoluteOffset(elem) {
    return elem.offsetParent && elem.offsetTop + absoluteOffset(elem.offsetParent);
}

It uses casting from null to 0, which isn't proper etiquette in some circles, but I like it :) The second part uses window.scroll. So the rest of the solution is:

function scrollToElement(elem) {
    window.scroll(absoluteOffset(elem));
}

Voila!

You need to add a name attribute.

Since this is a multiple select, at the HTTP level, the client just sends multiple name/value pairs with the same name, you can observe this yourself if you use a form with method="GET": someurl?something=1&something=2&something=3.

In the case of PHP, Ruby, and some other library/frameworks out there, you would need to add square braces ([]) at the end of the name. The frameworks will parse that string and wil present it in some easy to use format, like an array.

Apart from manually parsing the request there's no language/framework/library-agnostic way of accessing multiple values, because they all have different APIs

For PHP you can use:

<select name="something[]" id="inscompSelected" multiple="multiple" class="lstSelected">

You can list only packages in the virtualenv by pip freeze --local or pip list --local. This option works irrespective of whether you have global site packages visible in the virtualenv.

Note that restricting the virtualenv to not use global site packages isn't the answer to the problem, because the question is on how to separate the two lists, not how to constrain our workflow to fit limitations of tools.

Credits to @gvalkov's comment here. Cf. also this issue.

The .title() method of a string (either ASCII or Unicode is fine) does this:

>>> "hello world".title()
'Hello World'
>>> u"hello world".title()
u'Hello World'

However, look out for strings with embedded apostrophes, as noted in the docs.

The algorithm uses a simple language-independent definition of a word as groups of consecutive letters. The definition works in many contexts but it means that apostrophes in contractions and possessives form word boundaries, which may not be the desired result:

>>> "they're bill's friends from the UK".title()
"They'Re Bill'S Friends From The Uk"

the bottom cell will grow as you enter more text ... setting the table width will help too

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">

<head>
</head>
<body>
<table id="content" style="min-height:525px; height:525px; width:100%; border:0px; margin:0; padding:0; border-collapse:collapse;">
<tr><td style="height:10px; background-color:#900;">Upper</td></tr>
<tr><td style="min-height:515px; height:515px; background-color:#909;">lower<br/>
</td></tr>
</table>
</body>
</html>

This works for me. Kudos go here.

jQuery.fn.redraw = function() {
    return this.hide(0, function() {
        $(this).show();
    });
};

$(el).redraw();

If you are using Matplotlib and are trying to get good figures in a LaTeX document, save as an EPS. Specifically, try something like this after running the commands to plot the image:

plt.savefig('destination_path.eps', format='eps')

I have found that EPS files work best and the dpi parameter is what really makes them look good in a document.

To specify the orientation of the figure before saving, simply call the following before the plt.savefig call, but after creating the plot (assuming you have plotted using an axes with the name ax):

ax.view_init(elev=elevation_angle, azim=azimuthal_angle)

Where elevation_angle is a number (in degrees) specifying the polar angle (down from vertical z axis) and the azimuthal_angle specifies the azimuthal angle (around the z axis).

I find that it is easiest to determine these values by first plotting the image and then rotating it and watching the current values of the angles appear towards the bottom of the window just below the actual plot. Keep in mind that the x, y, z, positions appear by default, but they are replaced with the two angles when you start to click+drag+rotate the image.

sklearn.tree.export_graphviz doesn't return anything, and so by default returns None.

By doing dotfile = tree.export_graphviz(...) you overwrite your open file object, which had been previously assigned to dotfile, so you get an error when you try to close the file (as it's now None).

To fix it change your code to

...
dotfile = open("D:/dtree2.dot", 'w')
tree.export_graphviz(dtree, out_file = dotfile, feature_names = X.columns)
dotfile.close()
...

2019 Answer (for Windows):

If you want a permanent UUID that identifies a machine uniquely on Windows, you can use this trick: (Copied from my answer at https://stackoverflow.com/a/58416992/8874388).

from typing import Optional
import re
import subprocess
import uuid

def get_windows_uuid() -> Optional[uuid.UUID]:
    try:
        # Ask Windows for the device's permanent UUID. Throws if command missing/fails.
        txt = subprocess.check_output("wmic csproduct get uuid").decode()

        # Attempt to extract the UUID from the command's result.
        match = re.search(r"\bUUID\b[\s\r\n]+([^\s\r\n]+)", txt)
        if match is not None:
            txt = match.group(1)
            if txt is not None:
                # Remove the surrounding whitespace (newlines, space, etc)
                # and useless dashes etc, by only keeping hex (0-9 A-F) chars.
                txt = re.sub(r"[^0-9A-Fa-f]+", "", txt)

                # Ensure we have exactly 32 characters (16 bytes).
                if len(txt) == 32:
                    return uuid.UUID(txt)
    except:
        pass # Silence subprocess exception.

    return None

print(get_windows_uuid())

Uses Windows API to get the computer's permanent UUID, then processes the string to ensure it's a valid UUID, and lastly returns a Python object (https://docs.python.org/3/library/uuid.html) which gives you convenient ways to use the data (such as 128-bit integer, hex string, etc).

Good luck!

PS: The subprocess call could probably be replaced with ctypes directly calling Windows kernel/DLLs. But for my purposes this function is all I need. It does strong validation and produces correct results.

Rob's solution is very nice, only thing that in his -(void)adjustHeightOfTableview method the calling of

[self.view needsUpdateConstraints]

does nothing, it just returns a flag, instead calling

[self.view setNeedsUpdateConstraints]

will make the desired effect.

I did something like this :

Firebase ref = new Firebase(FIREBASE_URL);
ref.addValueEventListener(new ValueEventListener() {

@Override
public void onDataChange(DataSnapshot snapshot) {
    Map<String, Object> objectMap = (HashMap<String, Object>)    
             dataSnapshot.getValue();
    List<Match> = new ArrayList<Match>();
    for (Object obj : objectMap.values()) {
        if (obj instanceof Map) {
            Map<String, Object> mapObj = (Map<String, Object>) obj;
            Match match = new Match();
            match.setSport((String) mapObj.get(Constants.SPORT));
            match.setPlayingWith((String) mapObj.get(Constants.PLAYER));
            list.add(match);
        }
    }
  }
  @Override
  public void onCancelled(FirebaseError firebaseError) {

  }
});

Simply:

 try {
    const cmd = 'git rev-parse --is-inside-work-tree';
    execSync(cmd).toString();
 } catch (error) {
    console.log(`Status Code: ${error.status} with '${error.message}'`;
 }

Ref: https://stackoverflow.com/a/43077917/104085

// nodejs
var execSync = require('child_process').execSync;

// typescript
const { execSync } = require("child_process");

 try {
    const cmd = 'git rev-parse --is-inside-work-tree';
    execSync(cmd).toString();
 } catch (error) {
    error.status;  // 0 : successful exit, but here in exception it has to be greater than 0
    error.message; // Holds the message you typically want.
    error.stderr;  // Holds the stderr output. Use `.toString()`.
    error.stdout;  // Holds the stdout output. Use `.toString()`.
 }

When command runs successful:

c=0
words = ['challa','reddy','challa']

for idx, word in enumerate(words):
    if idx==0:
        firstword=word
        print(firstword)
    elif idx == len(words)-1:
        lastword=word
        print(lastword)
        if firstword==lastword:
            c=c+1
            print(c)

git push -f heroku local_branch_name:master

I think, this example suggests a small nuance on how the partitioning works and how group by works. My example is from Oracle 12, if my example happens to be a compiling bug.

I tried :

SELECT t.data_key
,      SUM ( CASE when t.state = 'A' THEN 1 ELSE 0 END) 
OVER   (PARTITION BY t.data_key) count_a_rows
,      SUM ( CASE when t.state = 'B' THEN 1 ELSE 0 END) 
OVER   (PARTITION BY t.data_key) count_b_rows
,      SUM ( CASE when t.state = 'C' THEN 1 ELSE 0 END) 
OVER   (PARTITION BY t.data_key) count_c_rows
,      COUNT (1) total_rows
from mytable t
group by t.data_key  ---- This does not compile as the compiler feels that t.state isn't in the group by and doesn't recognize the aggregation I'm looking for

This however works as expected :

SELECT distinct t.data_key
,      SUM ( CASE when t.state = 'A' THEN 1 ELSE 0 END) 
OVER   (PARTITION BY t.data_key) count_a_rows
,      SUM ( CASE when t.state = 'B' THEN 1 ELSE 0 END) 
OVER   (PARTITION BY t.data_key) count_b_rows
,      SUM ( CASE when t.state = 'C' THEN 1 ELSE 0 END) 
OVER   (PARTITION BY t.data_key) count_c_rows
,      COUNT (1) total_rows
from mytable t;

Producing the number of elements in each state based on the external key "data_key". So, if, data_key = 'APPLE' had 3 rows with state 'A', 2 rows with state 'B', a row with state 'C', the corresponding row for 'APPLE' would be 'APPLE', 3, 2, 1, 6.

Below is the pseudo-code for using sub-query using Criteria API.

CriteriaBuilder criteriaBuilder = entityManager.getCriteriaBuilder();
CriteriaQuery<Object> criteriaQuery = criteriaBuilder.createQuery();
Root<EMPLOYEE> from = criteriaQuery.from(EMPLOYEE.class);
Path<Object> path = from.get("compare_field"); // field to map with sub-query
from.fetch("name");
from.fetch("id");
CriteriaQuery<Object> select = criteriaQuery.select(from);

Subquery<PROJECT> subquery = criteriaQuery.subquery(PROJECT.class);
Root fromProject = subquery.from(PROJECT.class);
subquery.select(fromProject.get("requiredColumnName")); // field to map with main-query
subquery.where(criteriaBuilder.and(criteriaBuilder.equal("name",name_value),criteriaBuilder.equal("id",id_value)));

select.where(criteriaBuilder.in(path).value(subquery));

TypedQuery<Object> typedQuery = entityManager.createQuery(select);
List<Object> resultList = typedQuery.getResultList();

Also it definitely needs some modification as I have tried to map it according to your query. Here is a link http://www.ibm.com/developerworks/java/library/j-typesafejpa/ which explains concept nicely.

This is from the official website. php.net

After installation of PHP.

Windows

Move to Windows\system32 folder: libssh2.dll, php_curl.dll, ssleay32.dll, libeay32.dll

Linux

Move to Apache24\bin folder libssh2.dll

Then uncomment extension=php_curl.dll in php.ini

Not sure if it's worth anything, but I had a similar problem where I was getting a "java.sql.SQLException: No suitable driver found" error. I found this thread while researching a solution.

The way I ended up solving my problem was to forgo using java.sql.DriverManager to get a connection and instead built up an instance of org.hsqldb.jdbc.jdbcDataSource and used that.

The root cause of my problem (I believe) had to do with the classloader hierarchy and the fact that the JRE was running Java 5. Even though I could successfully load the jdbcDriver class, the classloader behind java.sql.DriverManager was higher up, to the point that it couldn't see the hsqldb.jar I needed.

Anyway, just putting this note here in case someone else stumbles by with a similar problem.

About @calfzhou's comment, you can use, as usually, **kwargs:

Online running example

class A(object):
  def __init__(self, a, *args, **kwargs):
    print("A", a)

class B(A):
  def __init__(self, b, *args, **kwargs):
    super(B, self).__init__(*args, **kwargs)
    print("B", b)

class A1(A):
  def __init__(self, a1, *args, **kwargs):
    super(A1, self).__init__(*args, **kwargs)
    print("A1", a1)

class B1(A1, B):
  def __init__(self, b1, *args, **kwargs):
    super(B1, self).__init__(*args, **kwargs)
    print("B1", b1)


B1(a1=6, b1=5, b="hello", a=None)

Result:

A None
B hello
A1 6
B1 5

You can also use them positionally:

B1(5, 6, b="hello", a=None)

but you have to remember the MRO, it's really confusing. You can avoid this by using keyword-only parameters:

class A(object):
  def __init__(self, *args, a, **kwargs):
    print("A", a)

etcetera.

I can be a little annoying, but I noticed that people forgot every time to use *args and **kwargs when they override a method, while it's one of few really useful and sane use of these 'magic variables'.

No one here posted an answer with all of the correct CSS variations, so here it is:

-webkit-touch-callout: none;
-webkit-user-select: none;
-khtml-user-select: none;
-moz-user-select: none;
-ms-user-select: none;
user-select: none;

I managed to do it by using the following code.

@Html.TextBoxFor(model => model.EndTime, new { type = "time" })

"Failed to read artifact descriptor" problems generally indicate a problem with the dependency's pom file in the maven repository. I would suggest you to double check if the pom file's name is the same with the name maven expects, and also to check if the pom file contents are valid.

I take the xml route by wrapping the values into elements (M but anything works):

declare @v nvarchar(max) = '100,201,abcde'

select 
    a.value('.', 'varchar(max)')
from
    (select cast('<M>' + REPLACE(@v, ',', '</M><M>') + '</M>' AS XML) as col) as A
    CROSS APPLY A.col.nodes ('/M') AS Split(a)

IIF is a non-standard T-SQL function. It was added to SQL SERVER 2012, so that Access could migrate to SQL Server without refactoring the IIF's to CASE before hand. Once the Access db is fully migrated into SQL Server, you can refactor.

seeing it in digital circuit domain

1. A Wire will create a wire output which can only be assigned any input by using assign statement as assign statement creates a port/pin connection and wire can be joined to the port/pin
2. A reg will create a register(D FLIP FLOP ) which gets or recieve inputs on basis of sensitivity list either it can be clock (rising or falling ) or combinational edge .

so it completely depends on your use whether you need to create a register and tick it according to sensitivity list or you want to create a port/pin assignment

A nonetype is the type of a None.

See the docs here: https://docs.python.org/2/library/types.html#types.NoneType

Question 1: Use .delegate on the div to bind a click handler to the button.

Question 2: Use $(this).val() or this.value (the latter would be faster) inside of the click handler. this will refer to the button.

$("#pg_menu_content").on('click', '#btn_a', function () {
  alert($(this).val());
});

$div = $('<div data-role="fieldcontain"/>');
$("<input type='button' value='Dynamic Button' id='btn_a' />").appendTo($div.clone()).appendTo('#pg_menu_content');

Found the solution.

In the parent I declare a new instance of the ChildClass() then bind the event handler in that class to the local method in the parent

In the child class I add a public event handler:

public EventHandler UpdateProgress;

In the parent I create a new instance of this child class then bind the local parent event to the public eventhandler in the child

ChildClass child = new ChildClass();
child.UpdateProgress += this.MyMethod;
child.LoadData(this.MyDataTable);

Then in the LoadData() of the child class I can call

private LoadData() {
    this.OnMyMethod();
}

Where OnMyMethod is:

public void OnMyMethod()
{
     // has the event handler been assigned?
     if (this.UpdateProgress!= null)
     {
         // raise the event
         this.UpdateProgress(this, new EventArgs());
     }
}

This runs the event in the parent class

Need to convert it in base64.

JS have btoa() function for it.

For example:

var img = document.createElement('img');
img.src = 'data:image/jpeg;base64,' + btoa('your-binary-data');
document.body.appendChild(img);

But i think what your binary data in pastebin is invalid - the jpeg data must be ended on 'ffd9'.

Update:

Need to write simple hex to base64 converter:

function hexToBase64(str) {
    return btoa(String.fromCharCode.apply(null, str.replace(/\r|\n/g, "").replace(/([\da-fA-F]{2}) ?/g, "0x$1 ").replace(/ +$/, "").split(" ")));
}

And use it:

img.src = 'data:image/jpeg;base64,' + hexToBase64('your-binary-data');

See working example with your hex data on jsfiddle

You can make your ImageButton widget as I did. In my case, I needed a widget with a fixed icon size. Let's start from custom attributes:

<?xml version="1.0" encoding="utf-8"?>
<resources>
    <declare-styleable name="ImageButtonFixedIconSize">
        <attr name="imageButton_icon" format="reference" />
        <attr name="imageButton_iconWidth" format="dimension" />
        <attr name="imageButton_iconHeight" format="dimension" />
    </declare-styleable>
</resources>

Widget class is quite simple (the key point is padding calculations in onLayout method):

class ImageButtonFixedIconSize
@JvmOverloads
constructor(
    context: Context,
    attrs: AttributeSet? = null,
    defStyleAttr: Int = android.R.attr.imageButtonStyle
) : ImageButton(context, attrs, defStyleAttr) {

    private lateinit var icon: Drawable

    @Px
    private var iconWidth: Int = 0
    @Px
    private var iconHeight: Int = 0

    init {
        scaleType = ScaleType.FIT_XY
        attrs?.let { retrieveAttributes(it) }
    }

    /**
     *
     */
    override fun onLayout(changed: Boolean, left: Int, top: Int, right: Int, bottom: Int) {
        val width = right - left
        val height = bottom - top

        val horizontalPadding = if(width > iconWidth) (width - iconWidth) / 2 else 0
        val verticalPadding = if(height > iconHeight) (height - iconHeight) / 2 else 0

        setPadding(horizontalPadding, verticalPadding, horizontalPadding, verticalPadding)

        setImageDrawable(icon)

        super.onLayout(changed, left, top, right, bottom)
    }

    /**
     *
     */
    private fun retrieveAttributes(attrs: AttributeSet) {
        val typedArray = context.obtainStyledAttributes(attrs, R.styleable.ImageButtonFixedIconSize)

        icon = typedArray.getDrawable(R.styleable.ImageButtonFixedIconSize_imageButton_icon)!!

        iconWidth = typedArray.getDimension(R.styleable.ImageButtonFixedIconSize_imageButton_iconWidth, 0f).toInt()
        iconHeight = typedArray.getDimension(R.styleable.ImageButtonFixedIconSize_imageButton_iconHeight, 0f).toInt()

        typedArray.recycle()
    }
}

And at last you should use your widget like this:

<com.syleiman.gingermoney.ui.common.controls.ImageButtonFixedIconSize
    android:layout_width="90dp"
    android:layout_height="63dp"

    app:imageButton_icon="@drawable/ic_backspace"
    app:imageButton_iconWidth="20dp"
    app:imageButton_iconHeight="15dp"

    android:id="@+id/backspaceButton"
    tools:ignore="ContentDescription"
    />

I'm using a slightly different approach where public struct methods implement interfaces but their logic is limited to just wrapping private (unexported) functions which take those interfaces as parameters. This gives you the granularity you would need to mock virtually any dependency and yet have a clean API to use from outside your test suite.

To understand this it is imperative to understand that you have access to the unexported methods in your test case (i.e. from within your _test.go files) so you test those instead of testing the exported ones which have no logic inside beside wrapping.

To summarize: test the unexported functions instead of testing the exported ones!

Let's make an example. Say that we have a Slack API struct which has two methods:

• the SendMessage method which sends an HTTP request to a Slack webhook
• the SendDataSynchronously method which given a slice of strings iterates over them and calls SendMessage for every iteration

So in order to test SendDataSynchronously without making an HTTP request each time we would have to mock SendMessage, right?

package main

import (
    "fmt"
)

// URI interface
type URI interface {
    GetURL() string
}

// MessageSender interface
type MessageSender interface {
    SendMessage(message string) error
}

// This one is the "object" that our users will call to use this package functionalities
type API struct {
    baseURL  string
    endpoint string
}

// Here we make API implement implicitly the URI interface
func (api *API) GetURL() string {
    return api.baseURL + api.endpoint
}

// Here we make API implement implicitly the MessageSender interface
// Again we're just WRAPPING the sendMessage function here, nothing fancy 
func (api *API) SendMessage(message string) error {
    return sendMessage(api, message)
}

// We want to test this method but it calls SendMessage which makes a real HTTP request!
// Again we're just WRAPPING the sendDataSynchronously function here, nothing fancy
func (api *API) SendDataSynchronously(data []string) error {
    return sendDataSynchronously(api, data)
}

// this would make a real HTTP request
func sendMessage(uri URI, message string) error {
    fmt.Println("This function won't get called because we will mock it")
    return nil
}

// this is the function we want to test :)
func sendDataSynchronously(sender MessageSender, data []string) error {
    for _, text := range data {
        err := sender.SendMessage(text)

        if err != nil {
            return err
        }
    }

    return nil
}

// TEST CASE BELOW

// Here's our mock which just contains some variables that will be filled for running assertions on them later on
type mockedSender struct {
    err      error
    messages []string
}

// We make our mock implement the MessageSender interface so we can test sendDataSynchronously
func (sender *mockedSender) SendMessage(message string) error {
    // let's store all received messages for later assertions
    sender.messages = append(sender.messages, message)

    return sender.err // return error for later assertions
}

func TestSendsAllMessagesSynchronously() {
    mockedMessages := make([]string, 0)
    sender := mockedSender{nil, mockedMessages}

    messagesToSend := []string{"one", "two", "three"}
    err := sendDataSynchronously(&sender, messagesToSend)

    if err == nil {
        fmt.Println("All good here we expect the error to be nil:", err)
    }

    expectedMessages := fmt.Sprintf("%v", messagesToSend)
    actualMessages := fmt.Sprintf("%v", sender.messages)

    if expectedMessages == actualMessages {
        fmt.Println("Actual messages are as expected:", actualMessages)
    }
}

func main() {
    TestSendsAllMessagesSynchronously()
}

What I like about this approach is that by looking at the unexported methods you can clearly see what the dependencies are. At the same time the API that you export is a lot cleaner and with less parameters to pass along since the true dependency here is just the parent receiver which is implementing all those interfaces itself. Yet every function is potentially depending only on one part of it (one, maybe two interfaces) which makes refactors a lot easier. It's nice to see how your code is really coupled just by looking at the functions signatures, I think it makes a powerful tool against smelling code.

To make things easy I put everything into one file to allow you to run the code in the playground here but I suggest you also check out the full example on GitHub, here is the slack.go file and here the slack_test.go.

And here the whole thing.

Whether to use a HashSet<> or List<> comes down to how you need to access your collection. If you need to guarantee the order of items, use a List. If you don't, use a HashSet. Let Microsoft worry about the implementation of their hashing algorithms and objects.

A HashSet will access items without having to enumerate the collection (complexity of O(1) or near it), and because a List guarantees order, unlike a HashSet, some items will have to be enumerated (complexity of O(n)).

We tried pretty much what the other answers are describing with moderate level of success. What really worked for us (Apache Kafka 0.8.1) is the class command

sh kafka-run-class.sh kafka.admin.DeleteTopicCommand --topic yourtopic --zookeeper localhost:2181

I think I found a solution to hide certain JavaScript codes in the view source of the browser. But you have to use jQuery to do this.

For example:

In your index.php

<head>
<script language = 'javascript' src = 'jquery.js'></script>
<script language = 'javascript' src = 'js.js'></script>
</head>

<body>
<a href = "javascript:void(null)" onclick = "loaddiv()">Click me.</a>

<div id = "content">
</div>

</body>

You load a file in the html/php body called by a jquery function in the js.js file.

js.js

function loaddiv()
{$('#content').load('content.php');}

Here's the trick.

In your content.php file put another head tag then call another js file from there.

content.php

<head>
<script language = 'javascript' src = 'js2.js'></script>
</head>

<a href = "javascript:void(null)" onclick = "loaddiv2()">Click me too.</a>

<div id = "content2">
</div>

in the js2.js file create any function you want.

example:

js2.js

function loaddiv2()
{$('#content2').load('content2.php');}

content2.php

<?php
echo "Test 2";
?>

Please follow link then copy paste it in the filename of jquery.js

http://dl.dropbox.com/u/36557803/jquery.js

I hope this helps.

You need to actually define the static member somewhere (after the class definition). Try this:

class Foo { /* ... */ };

const int Foo::MEMBER;

int main() { /* ... */ }

That should get rid of the undefined reference.

The standard library function urllib.parse.urlsplit() is all you need. Here is an example for Python3:

>>> import urllib.parse
>>> o = urllib.parse.urlsplit('https://user:[email protected]:8080/dir/page.html?q1=test&q2=a2#anchor1')
>>> o.scheme
'https'
>>> o.netloc
'user:[email protected]:8080'
>>> o.hostname
'www.example.com'
>>> o.port
8080
>>> o.path
'/dir/page.html'
>>> o.query
'q1=test&q2=a2'
>>> o.fragment
'anchor1'
>>> o.username
'user'
>>> o.password
'pass'

Here is simple Android Code for detecting gesture direction

In MainActivity.java and activity_main.xml, write the following code:

MainActivity.java

import java.util.ArrayList;

import android.app.Activity;
import android.gesture.Gesture;
import android.gesture.GestureLibraries;
import android.gesture.GestureLibrary;
import android.gesture.GestureOverlayView;
import android.gesture.GestureOverlayView.OnGesturePerformedListener;
import android.gesture.GestureStroke;
import android.gesture.Prediction;
import android.os.Bundle;
import android.widget.Toast;

public class MainActivity extends Activity implements
        OnGesturePerformedListener {

    GestureOverlayView gesture;
    GestureLibrary lib;
    ArrayList<Prediction> prediction;

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        lib = GestureLibraries.fromRawResource(MainActivity.this,
                R.id.gestureOverlayView1);
        gesture = (GestureOverlayView) findViewById(R.id.gestureOverlayView1);
        gesture.addOnGesturePerformedListener(this);
    }

    @Override
    public void onGesturePerformed(GestureOverlayView overlay, Gesture gesture) {
        ArrayList<GestureStroke> strokeList = gesture.getStrokes();
        // prediction = lib.recognize(gesture);
        float f[] = strokeList.get(0).points;
        String str = "";

        if (f[0] < f[f.length - 2]) {
            str = "Right gesture";
        } else if (f[0] > f[f.length - 2]) {
            str = "Left gesture";
        } else {
            str = "no direction";
        }
        Toast.makeText(getApplicationContext(), str, Toast.LENGTH_LONG).show();

    }

}

activity_main.xml

<android.gesture.GestureOverlayView xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    xmlns:android1="http://schemas.android.com/apk/res/android"
    xmlns:android2="http://schemas.android.com/apk/res/android"
    android:id="@+id/gestureOverlayView1"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android1:orientation="vertical" >

    <TextView
        android:id="@+id/textView1"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:text="Draw gesture"
        android:textAppearance="?android:attr/textAppearanceMedium" />

</android.gesture.GestureOverlayView>

public void PrintAllSuits()
{
    foreach(string suit in Enum.GetNames(typeof(Suits)))
    {
        Console.WriteLine(suit);
    }
}

a solution i came up with... probably pretty inefficient in comparison tho Fosco's solution:

 protected function getFirstPosition(array$array, $content, $key = true) {

  $index = 0;
  if ($key) {
   foreach ($array as $key => $value) {
    if ($key == $content) {
     return $index;
    }
    $index++;
   }
  } else {
   foreach ($array as $key => $value) {
    if ($value == $content) {
     return $index;
    }
    $index++;
   }
  }
 }

I realize this is an old thread but I've been working in sqlite3 as of late and came up with this method which better suited my needs of dynamically generating parameterized queries:

insert or ignore into <table>(<primaryKey>, <column1>, <column2>, ...) values(<primaryKeyValue>, <value1>, <value2>, ...); 
update <table> set <column1>=<value1>, <column2>=<value2>, ... where changes()=0 and <primaryKey>=<primaryKeyValue>; 

It's still 2 queries with a where clause on the update but seems to do the trick. I also have this vision in my head that sqlite can optimize away the update statement entirely if the call to changes() is greater than zero. Whether or not it actually does that is beyond my knowledge, but a man can dream can't he? ;)

For bonus points you can append this line which returns you the id of the row whether it be a newly inserted row or an existing row.

select case changes() WHEN 0 THEN last_insert_rowid() else <primaryKeyValue> end;

Convert.ToDecimal(the double you are trying to convert);

Quick Overview: index and find

Next to the find method there is as well index. find and index both yield the same result: returning the position of the first occurrence, but if nothing is found index will raise a ValueError whereas find returns -1. Speedwise, both have the same benchmark results.

s.find(t)    #returns: -1, or index where t starts in s
s.index(t)   #returns: Same as find, but raises ValueError if t is not in s

Additional knowledge: rfind and rindex:

In general, find and index return the smallest index where the passed-in string starts, and rfind and rindex return the largest index where it starts Most of the string searching algorithms search from left to right, so functions starting with r indicate that the search happens from right to left.

So in case that the likelihood of the element you are searching is close to the end than to the start of the list, rfind or rindex would be faster.

s.rfind(t)   #returns: Same as find, but searched right to left
s.rindex(t)  #returns: Same as index, but searches right to left

Source: Python: Visual QuickStart Guide, Toby Donaldson