Try this code.

public void send (String fileName) {
    String SFTPHOST = "host:IP";
    int SFTPPORT = 22;
    String SFTPUSER = "username";
    String SFTPPASS = "password";
    String SFTPWORKINGDIR = "file/to/transfer";

    Session session = null;
    Channel channel = null;
    ChannelSftp channelSftp = null;
    System.out.println("preparing the host information for sftp.");

    try {
        JSch jsch = new JSch();
        session = jsch.getSession(SFTPUSER, SFTPHOST, SFTPPORT);
        session.setPassword(SFTPPASS);
        java.util.Properties config = new java.util.Properties();
        config.put("StrictHostKeyChecking", "no");
        session.setConfig(config);
        session.connect();
        System.out.println("Host connected.");
        channel = session.openChannel("sftp");
        channel.connect();
        System.out.println("sftp channel opened and connected.");
        channelSftp = (ChannelSftp) channel;
        channelSftp.cd(SFTPWORKINGDIR);
        File f = new File(fileName);
        channelSftp.put(new FileInputStream(f), f.getName());
        log.info("File transfered successfully to host.");
    } catch (Exception ex) {
        System.out.println("Exception found while tranfer the response.");
    } finally {
        channelSftp.exit();
        System.out.println("sftp Channel exited.");
        channel.disconnect();
        System.out.println("Channel disconnected.");
        session.disconnect();
        System.out.println("Host Session disconnected.");
    }
}   

In your CSS Style tag put this:

body {
  background: url('yourgif.gif') no-repeat center center fixed;
  background-size: cover;
}

{{yourDate|date:'*Prefered Format*'}}

Example:

{{yourDate|date:'F d, Y'}}

For preferred format: https://docs.djangoproject.com/en/3.1/ref/templates/builtins/#date

Apparently the information is available using the Google Directions API in its professional edition Maps for work. According to the API's documentation:

Note: Maps for Work users must include client and signature parameters with their requests instead of a key.
[...]
duration_in_traffic indicates the total duration of this leg, taking into account current traffic conditions. The duration in traffic will only be returned if all of the following are true:

• The directions request includes a departure_time parameter set to a value within a few minutes of the current time.
• The request includes a valid Google Maps API for Work client and signature parameter.
• Traffic conditions are available for the requested route.
• The directions request does not include stopover waypoints.

int i = 0;
Console.WriteLine(i++); // Prints 0. Then value of "i" becomes 1.
Console.WriteLine(--i); // Value of "i" becomes 0. Then prints 0.

Does this answer your question ?

Both nginx -t and nginx -V would print out the default nginx config file path.

$ nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

$ nginx -V
nginx version: nginx/1.11.1
built by gcc 4.9.2 (Debian 4.9.2-10)
built with OpenSSL 1.0.1k 8 Jan 2015
TLS SNI support enabled
configure arguments: --prefix=/etc/nginx --sbin-path=/usr/sbin/nginx --modules-path=/usr/lib/nginx/modules --conf-path=/etc/nginx/nginx.conf ...

If you want, you can get the config file by:

$ nginx -V 2>&1 | grep -o '\-\-conf-path=\(.*conf\)' | cut -d '=' -f2
/etc/nginx/nginx.conf

Even if you have loaded some other config file, they would still print out the default value.

ps aux would show you the current loaded nginx config file.

$ ps aux
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root        11  0.0  0.2  31720  2212 ?        Ss   Jul23   0:00 nginx: master process nginx -c /app/nginx.conf

So that you could actually get the config file by for example:

$ ps aux | grep "[c]onf" | awk '{print $(NF)}'
/app/nginx.conf

You could try:

<a href="<?php echo $directory ?>">The link to the file</a>

Or for PHP 5.4+ (<?= is the PHP short echo tag):

<a href="<?= $directory ?>">The link to the file</a>

But your path is relative to the server, don't forget that.

Try pyautogui:

import pyautogui
resolution = pyautogui.size()
print(resolution) 

Jar class/package is for specific Jar file mechanisms where there is a manifest that is used by the Jar files in some cases.

The Zip file class/package handles any compressed files that include Jar files, which is a type of compressed file.

The Jar classes thus extend the Zip package classes.

I know this is an older thread, but this is the first item you find when searching, and the above solutions don't work if you need to retain charts in a workbook that you already have created. In that case, xlwings is a better option - it allows you to write to the excel book and keeps the charts/chart data.

simple example:

import xlwings as xw
import pandas as pd

#create DF
months = ['2017-01','2017-02','2017-03','2017-04','2017-05','2017-06','2017-07','2017-08','2017-09','2017-10','2017-11','2017-12']
value1 = [x * 5+5 for x in range(len(months))]
df = pd.DataFrame(value1, index = months, columns = ['value1'])
df['value2'] = df['value1']+5
df['value3'] = df['value2']+5

#load workbook that has a chart in it
wb = xw.Book('C:\\data\\bookwithChart.xlsx')

ws = wb.sheets['chartData']

ws.range('A1').options(index=False).value = df

wb = xw.Book('C:\\data\\bookwithChart_updated.xlsx')

xw.apps[0].quit()

It's because there is no long in javascript.

http://javascript.about.com/od/reference/g/rlong.htm

I believe a lot of programmers have run into one or two interview problems where they are asked to deep copy a linked list, however this problem is harder than it sounds!

in python, there is a module called "copy" with two useful functions

import copy
copy.copy()
copy.deepcopy()

copy() is a shallow copy function, if the given argument is a compound data structure, for instance a list, then python will create another object of the same type (in this case, a new list) but for everything inside old list, only their reference is copied

# think of it like
newList = [elem for elem in oldlist]

Intuitively, we could assume that deepcopy() would follow the same paradigm, and the only difference is that for each elem we will recursively call deepcopy, (just like the answer of mbcoder)

but this is wrong!

deepcopy() actually preserve the graphical structure of the original compound data:

a = [1,2]
b = [a,a] # there's only 1 object a
c = deepcopy(b)

# check the result
c[0] is a # return False, a new object a' is created
c[0] is c[1] # return True, c is [a',a'] not [a',a'']

this is the tricky part, during the process of deepcopy() a hashtable(dictionary in python) is used to map: "old_object ref onto new_object ref", this prevent unnecessary duplicates and thus preserve the structure of the copied compound data

official doc

In an update to Schahriar SaffarShargh's answer, Google has recently implemented a 'Google abuse' feature, making it impossible to send just any regular old HTTP GET to a URL such as:

http://translate.google.com/translate_tts?tl=en&q=Hello%20World

which worked just fine and dandy previously. Now, following such a link presents you with a CAPTCHA. This also affects HTTP GET requests out-of-browser (such as with cURL), because using that URL gives a redirect to the abuse protection page (the CAPTCHA).

To start, you have to add the query parameter client to the request URL:

http://translate.google.com/translate_tts?tl=en&q=Hello%20World&client=t

Google Translate sends &client=t, so you should too.

Before you make that HTTP request, make sure that you set the Referer header:

Referer: http://translate.google.com/

Evidently, the User-Agent header is also required, but interestingly enough it can be blank:

User-Agent:

Edit: NOTE - on some user-agents, such as Android 4.X, the custom User-Agent header is not sent, meaning that Google will not service the request. In order to solve that problem, I simply set the User-Agent to a valid one, such as stagefright/1.2 (Linux;Android 5.0). Use Wireshark to debug requests (as I did) if Google's servers are not responding, and ensure that these headers are being set properly in the GET! Google will respond with a 503 Service Unavailable if the request fails, followed by a redirect to the CAPTCHA page.

This solution is a bit brittle; it is entirely possible that Google will change the way they handle these requests in the future, so in the end I would suggest asking Google to make a real API endpoint (free or paid) that we can use without feeling dirty for faking HTTP headers.

Edit 2: For those interested, this cURL command should work perfectly fine to download an mp3 of Hello in English:

curl 'http://translate.google.com/translate_tts?ie=UTF-8&q=Hello&tl=en&client=t' -H 'Referer: http://translate.google.com/' -H 'User-Agent: stagefright/1.2 (Linux;Android 5.0)' > google_tts.mp3

As you may notice, I have set both the Referer and User-Agent headers in the request, as well as added the client=t parameter to the querystring. You may use https instead of http, your choice!

Edit 3: Google now requires a token for each GET request (noted by tk in the querystring). Below is the revised cURL command that will correctly download a TTS mp3:

curl 'https://translate.google.com/translate_tts?ie=UTF-8&q=hello&tl=en&tk=995126.592330&client=t' -H 'user-agent: stagefright/1.2 (Linux;Android 5.0)' -H 'referer: https://translate.google.com/' > google_tts.mp3

Notice the &tk=995126.592330 in the querystring; this is the new token. I obtained this token by pressing the speaker icon on translate.google.com and looking at the GET request. I simply added this querystring parameter to the previous cURL command, and it works.

NOTE: obviously this solution is very frail, and breaks at the whim of the architects at Google who introduce new things like tokens required for the requests. This token may not work tomorrow (though I will check and report back)... the point is, it is not wise to rely on this method; instead, one should turn to a commercial TTS solution, especially if using TTS in production.

For further explanation of the token generation and what you might be able to do about it, see Boude's answer.

If this solution breaks any time in the future, please leave a comment on this answer so that we can attempt to find a fix for it!

While invoking the mysql CLI, you can specify the database name through the -D option. From mysql --help:

-D, --database=name Database to use.

I use this command:

mysql -h <db_host> -u <user> -D <db_name> -p

The problem can also occurs if using jquery you attach an event listener twice. For exemple you would set without unbinding :

            $("body").on("click","#fixerror",function(event){
                $("#fixerrormodal").modal('toggle')
            })

If this happens the event is fired twice in a row and the modal disapears.

            $("body").on("click","#fixerror",function(event){
                $("#fixerrormodal").modal()
                $("#fixerrormodal").modal('toggle')
            })

See exemple : http://embed.plnkr.co/i5xB1WbX7zgXrbDMhNAW/preview

Building off @Marc's solution -- since the bullet character is rendered differently with different fonts and browsers, I used the following css3 technique with border-radius to make a bullet that I have more control over:

li:before {
    content: '';
    background-color: #898989;
    display: inline-block;
    position: relative;
    height: 12px;
    width: 12px;
    border-radius: 6px;
    -webkit-border-radius: 6px;
    -moz-border-radius: 6px;
    -moz-background-clip: padding;
    -webkit-background-clip: padding-box;
    background-clip: padding-box;
    margin-right: 4px;
    top: 2px;
}

this will work as well

 require_once(realpath($_SERVER["DOCUMENT_ROOT"]) .'/mysite/php/includes/dbconn.inc');

For some reason, the other jQuery solutions provided here worked when running the script from console, however, it did not work for me when triggered from Chrome Bookmarklets.

Luckily, this Vanilla JS solution (the triggerChangeEvent function) did work:

/**_x000D_
  * Trigger a `change` event on given drop down option element._x000D_
  * WARNING: only works if not already selected._x000D_
  * @see https://stackoverflow.com/questions/902212/trigger-change-event-of-dropdown/58579258#58579258_x000D_
  */_x000D_
function triggerChangeEvent(option) {_x000D_
  // set selected property_x000D_
  option.selected = true;_x000D_
  _x000D_
  // raise event on parent <select> element_x000D_
  if ("createEvent" in document) {_x000D_
    var evt = document.createEvent("HTMLEvents");_x000D_
    evt.initEvent("change", false, true);_x000D_
    option.parentNode.dispatchEvent(evt);_x000D_
  }_x000D_
  else {_x000D_
    option.parentNode.fireEvent("onchange");_x000D_
  }_x000D_
}_x000D_
_x000D_
// ################################################_x000D_
// Setup our test case_x000D_
// ################################################_x000D_
_x000D_
(function setup() {_x000D_
  const sel = document.querySelector('#fruit');_x000D_
  sel.onchange = () => {_x000D_
    document.querySelector('#result').textContent = sel.value;_x000D_
  };_x000D_
})();_x000D_
_x000D_
function runTest() {_x000D_
  const sel = document.querySelector('#selector').value;_x000D_
  const optionEl = document.querySelector(sel);_x000D_
  triggerChangeEvent(optionEl);_x000D_
}

<select id="fruit">_x000D_
  <option value="">(select a fruit)</option>_x000D_
  <option value="apple">Apple</option>_x000D_
  <option value="banana">Banana</option>_x000D_
  <option value="pineapple">Pineapple</option>_x000D_
</select>_x000D_
_x000D_
<p>_x000D_
  You have selected: <b id="result"></b>_x000D_
</p>_x000D_
<p>_x000D_
  <input id="selector" placeholder="selector" value="option[value='banana']">_x000D_
  <button onclick="runTest()">Trigger select!</button>_x000D_
</p>

Here's an example using hooks (requires React >= 16.8.0)

// import React, { useState } from 'react';_x000D_
const { useState } = React;_x000D_
_x000D_
function App() {_x000D_
  const [checked, setChecked] = useState(false);_x000D_
  const toggleChecked = () => setChecked(value => !value);_x000D_
  return (_x000D_
    <input_x000D_
      type="checkbox"_x000D_
      checked={checked}_x000D_
      onChange={toggleChecked}_x000D_
    />_x000D_
  );_x000D_
}_x000D_
_x000D_
const rootElement = document.getElementById("root");_x000D_
ReactDOM.render(<App />, rootElement);

<script crossorigin src="https://unpkg.com/react@16/umd/react.development.js"></script>_x000D_
<script crossorigin src="https://unpkg.com/react-dom@16/umd/react-dom.development.js"></script>_x000D_
_x000D_
<div id="root"><div>

To build on Sam Stern's answer, there is also a 3rd option which made things easier for me and that is using what Google call a Map, which is essentially a dictionary.

I think a dictionary is far better for the use case you're describing. I usually use arrays for stuff that isn't really updated too much, so they are more or less static. But for stuff that gets written a lot, specifically values that need to be updated for fields that are linked to something else in the database, dictionaries prove to be much easier to maintain and work with.

So for your specific case, the DB structure would look like this:

proprietary: "John Doe"
sharedWith:{
  whoEmail1: {when: timestamp},
  whoEmail2: {when: timestamp}
}

This will allow you to do the following:

var whoEmail = '[email protected]';

var sharedObject = {};
sharedObject['sharedWith.' + whoEmail + '.when'] = new Date();
sharedObject['merge'] = true;

firebase.firestore()
.collection('proprietary')
.doc(docID)
.update(sharedObject);

The reason for defining the object as a variable is that using 'sharedWith.' + whoEmail + '.when' directly in the set method will result in an error, at least when using it in a Node.js cloud function.

• Development mode is for testing
• Go to https://developers.facebook.com/apps, then App Review -> Select No for Your app is in development and unavailable to the public
• Go to Roles -> Testers, enter the Facebook user Id of the users you want to enable testing

pDialog = new ProgressDialog(this);

    // Set progressbar message
    pDialog.setMessage("Buffering...");
    pDialog.setIndeterminate(false);
    pDialog.setCancelable(false);
    // Show progressbar
    pDialog.show();

    try {
        // Start the MediaController
        MediaController mediacontroller = new MediaController(this);
        mediacontroller.setAnchorView(mVideoView);      

        Uri videoUri = Uri.parse(videoUrl);
        mVideoView.setMediaController(mediacontroller);
        mVideoView.setVideoURI(videoUri);

    } catch (Exception e) {

        e.printStackTrace();
    }

    mVideoView.requestFocus();
    mVideoView.setOnPreparedListener(new OnPreparedListener() {
        // Close the progress bar and play the video
        public void onPrepared(MediaPlayer mp) {
            pDialog.dismiss();
            mVideoView.start();
        }
    });
    mVideoView.setOnCompletionListener(new OnCompletionListener() {

        public void onCompletion(MediaPlayer mp) {
            if (pDialog.isShowing()) {
                pDialog.dismiss();
            }
            finish();               
        }
    });

Try this Script:

function addclassName(){
setTimeout(function(){
            var c = document.querySelectorAll(".modal-backdrop");
            for (var i = 0; i < c.length; i++) {
                c[i].style.zIndex =  1040 + i * 20  ;
            }
            var d = document.querySelectorAll(".modal.fade");
            for(var i = 0; i<d.length; i++){
                d[i].style.zIndex = 1050 + i * 20;
            }
}, 10);

}

This gets asked a lot. Basically, no there isn't, not for .NET 4.0. You have to do it manually at the start of each new thread (or ThreadPool function). You could perhaps store the culture name (or just the culture object) in a static field to save having to hit the DB, but that's about it.

One contending technology you've omitted is Server-Sent Events / Event Source. What are Long-Polling, Websockets, Server-Sent Events (SSE) and Comet? has a good discussion of all of these. Keep in mind that some of these are easier than others to integrate with on the server side.

Important note : jQuery.load() method can do not only GET but also POST requests, if data parameter is supplied (see: http://api.jquery.com/load/)

data Type: PlainObject or String A plain object or string that is sent to the server with the request.

Request Method The POST method is used if data is provided as an object; otherwise, GET is assumed.

Example: pass arrays of data to the server (POST request)
$( "#objectID" ).load( "test.php", { "choices[]": [ "Jon", "Susan" ] } );

Complete code to disable SSL hostname verifier,

RestTemplate restTemplate = new RestTemplate();
//to disable ssl hostname verifier
restTemplate.setRequestFactory(new SimpleClientHttpRequestFactory() {
   @Override
    protected void prepareConnection(HttpURLConnection connection, String httpMethod) throws IOException {
        if (connection instanceof HttpsURLConnection) {
            ((HttpsURLConnection) connection).setHostnameVerifier(new NoopHostnameVerifier());
        }
        super.prepareConnection(connection, httpMethod);
    }
});

Just to add on Jacek's perfect solution. If you're trying to do this in Kotlin, it wont work immediately. Instead, you'll want to use this:

@Throws(IOException::class)
fun getSplashVideo(context: Context): File {
    val cacheFile = File(context.cacheDir, "splash_video")
    try {
        val inputStream = context.assets.open("splash_video")
        val outputStream = FileOutputStream(cacheFile)
        try {
            inputStream.copyTo(outputStream)
        } finally {
            inputStream.close()
            outputStream.close()
        }
    } catch (e: IOException) {
        throw IOException("Could not open splash_video", e)
    }
    return cacheFile
}

If you work with generics, use List instead of ArrayList. The List has exactly the GetEnumerator method you need.

List<MyObject> myList = new List<MyObject>();

The initial problem is that the the configuration specifies a property suffix=".jsp" so the ViewResolver implementing class will add .jsp to the end of the view name being returned from your method.

However since you commented out the InternalResourceViewResolver then, depending on the rest of your application configuration, there might not be any other ViewResolver registered. You might find that nothing is working now.

Since .html files are static and do not require processing by a servlet then it is more efficient, and simpler, to use an <mvc:resources/> mapping. This requires Spring 3.0.4+.

For example:

<mvc:resources mapping="/static/**" location="/static/" />

which would pass through all requests starting with /static/ to the webapp/static/ directory.

So by putting index.html in webapp/static/ and using return "static/index.html"; from your method, Spring should find the view.

Other way to get a bitmap of an image is doing this:

Bitmap imagenAndroid = BitmapFactory.decodeResource(getResources(),R.drawable.jellybean_statue);
imageView.setImageBitmap(imagenAndroid);

You've got several options how to do this, either:

• urlencode() or rawurlencode() - functions designed to encode URLs for http protocol
• str_replace() - "heavy machinery" string replace
• strtr() - would have better performance than str_replace() when replacing multiple characters
• preg_replace() use regular expressions (perl compatible)

strtr()

Assuming that you want to replace "\t" and " " with "%20":

$replace_pairs = array(
  "\t" => '%20',
  " " => '%20',
);
return strtr( $text, $replace_pairs)

preg_replace()

You've got few options here, either replacing just space ~ ~, again replacing space and tab ~[ \t]~ or all kinds of spaces ~\s~:

return preg_replace( '~\s~', '%20', $text);

Or when you need to replace string like this "\t \t \t \t" with just one %20:

return preg_replace( '~\s+~', '%20', $text);

_{I assumed that you really want to use manual string replacement and handle more types of whitespaces such as non breakable space ( )}

with read

Here's an example that uses read to get the password and store it in the variable pass. Then, 7z uses the password to create an encrypted archive:

read -s -p "Enter password: " pass && 7z a archive.zip a_file -p"$pass"; unset pass

But be aware that the password can easily be sniffed.

Both .done() and .success() are callback functions and they essentially function the same way.

Here's the documentation. The difference is that .success() is deprecated as of jQuery 1.8. You should use .done() instead.

In case you don't want to click the link:

Deprecation Notice

The jqXHR.success(), jqXHR.error(), and jqXHR.complete() callback methods introduced in jQuery 1.5 are deprecated as of jQuery 1.8. To prepare your code for their eventual removal, use jqXHR.done(), jqXHR.fail(), and jqXHR.always() instead.

You can also replace "-moz-user-select:none" with "-moz-user-select:inherit". This will inherit the style value from any parent style or from the default style if no parent style was defined.

This will also work

>>> u=1./5
>>> print u
0.2

For updating multiple rows in a single query, you can try this

UPDATE table_name
SET 
column_1 = CASE WHEN any_column = value and any_column = value THEN column_1_value end,
column_2 = CASE WHEN any_column = value and any_column = value THEN column_2_value end,
column_3 = CASE WHEN any_column = value and any_column = value THEN column_3_value end,
.
.
.
column_n = CASE WHEN any_column = value and any_column = value THEN column_n_value end

if you don't need additional condition then remove and part of this query

The possible reason can also be that you have not inherited Controller from ApiController. Happened with me took a while to understand the same.

Since most answers focused on the theory I think I can add something to the discussion by giving a practical test I did. In my database I have around 4.5 million UUIDs generated using Java 8 UUID.randomUUID(). The following ones are just some I found out:

c0f55f62-b990-47bc-8caa-f42313669948

c0f55f62-e81e-4253-8299-00b4322829d5

c0f55f62-4979-4e87-8cd9-1c556894e2bb

b9ea2498-fb32-40ef-91ef-0ba00060fe64

be87a209-2114-45b3-9d5a-86d00060fe64

4a8a74a6-e972-4069-b480-bdea1177b21f

12fb4958-bee2-4c89-8cf8-edea1177b21f

If it was truly random, the probability of having these kind of similar UUIDs would be considerably low (see edit), since we're considering only 4.5 million entries. So, although this function is good, in terms of not having collisions, for me it doesn't seem that good as it would be in theory.

Edit:

A lot of people seem to not understand this answer so I'll clarify my point: I know that the similarities are "small" and far from a full collision. However, I just wanted to compare the Java's UUID.randomUUID() with a true random number generator, which is the actual question.

In a true random number generator, the probability of the last case happening would be around = 0.007%. Therefore, I think my conclusion stands.

Formula is explained in this wiki article en.wikipedia.org/wiki/Birthday_problem

Using Text As Bullets

Use li:before with an escaped Hex HTML Entity (or any plain text).

Example

My example will produce lists with check marks as bullets.

CSS:

ul {
    list-style: none;
    padding: 0px;
}

ul li:before
{
    content: '\2713';
    margin: 0 1em;    /* any design */
}

Browser Compatibility

Haven't tested myself, but it should be supported as of IE8. At least that's what quirksmode & css-tricks say.

You can use conditional comments to apply older/slower solutions like images, or scripts. Better yet, use both with <noscript> for the images.

HTML:

<!--[if lt IE 8]>
    *SCRIPT SOLUTION*
    <noscript>
        *IMAGE SOLUTION*
    </noscript>
<![endif]-->

About background images

Background images are indeed easy to handle, but...

1. Browser support for background-size is actually only as of IE9.
2. HTML text colors and special (crazy) fonts can do a lot, with less HTTP requests.
3. A script solution can just inject the HTML Entity, and let the same CSS do the work.
4. A good resetting CSS code might make list-style (the more logical choice) easier.

Enjoy.

SELECT <select_list> 
FROM Table_A A
LEFT JOIN Table_B B
ON A.Key = B.Key
WHERE B.Key IS NULL

Full image of join

From aticle : http://www.codeproject.com/KB/database/Visual_SQL_Joins.aspx

Sometimes you have things other than text inside a table cell that you'd like to be horizontally centered. In order to do this, first set up some css...

<style>
    div.centered {
        margin: auto;
        width: 100%;
        display: flex;
        justify-content: center;
    }
</style>

Then declare a div with class="centered" inside each table cell you want centered.

<td>
    <div class="centered">
        Anything: text, controls, etc... will be horizontally centered.
    </div>
</td>

Your target domain might refuse to send you information. This can work as a filter based on browser agent or any other header information. This is a defense against bots, crawlers or any unwanted applications.

    void NumericTextBoxInput(object sender, TextCompositionEventArgs e)
    {
        TextBox txt = (TextBox)sender;
        var regex = new Regex(@"^[0-9]*(?:\.[0-9]{0,1})?$");
        string str = txt.Text + e.Text.ToString();
        int cntPrc = 0;
        if (str.Contains('.'))
        {
            string[] tokens = str.Split('.');
            if (tokens.Count() > 0)
            {
                string result = tokens[1];
                char[] prc = result.ToCharArray();
                cntPrc = prc.Count();
            }
        }
        if (regex.IsMatch(e.Text) && !(e.Text == "." && ((TextBox)sender).Text.Contains(e.Text)) && (cntPrc < 3))
        {
            e.Handled = false;
        }
        else
        {
            e.Handled = true;
        }
    }

Instead of changing CSS values one by one I would suggest to use LESS. Bootstrap has LESS version on Github: https://github.com/twbs/bootstrap

LESS allows you to define variables to change colors which makes it so much more convenient. Define color once and LESS compiles CSS file that changes the values globally. Saves time and effort.

I had the same error and struggled to fix it, then answer above by Nagaraja JB helped me to fix it. In my case:

Was before: JSONObject response_json = new JSONObject(response_data);

Changed it to: JSONArray response_json = new JSONArray(response_data);

This fixed it.

brew install maven

Please ensure that you've installed the latest Xcode and Command Line tools.

xcode-select --install

adb shell "svc wifi enable"

This worked & it makes action in background without opening related option !!

Yahoo's api provides a CSV dump:

Example: http://finance.yahoo.com/d/quotes.csv?s=msft&f=price

I'm not sure if it is documented or not, but this code sample should showcase all of the features (namely the stat types [parameter f in the query string]. I'm sure you can find documentation (official or not) if you search for it.

http://www.goldb.org/ystockquote.html

Edit

I found some unofficial documentation:

http://ilmusaham.wordpress.com/tag/stock-yahoo-data/

My project is based on iOS 7 This helps me

[self.tableView setSeparatorStyle:UITableViewCellSeparatorStyleNone];

Then put a subview into cell as separator!

First create an xpath selector function.

function _x(STR_XPATH) {
    var xresult = document.evaluate(STR_XPATH, document, null, XPathResult.ANY_TYPE, null);
    var xnodes = [];
    var xres;
    while (xres = xresult.iterateNext()) {
        xnodes.push(xres);
    }

    return xnodes;
}

To use the xpath selector with jquery, you can do like this:

$(_x('/html/.//div[@id="text"]')).attr('id', 'modified-text');

Hope this can help.

With the following code you can load the controller classes and execute the methods.

This code was written for codeigniter 2.1

First add a new file MY_Loader.php in your application/core directory. Add the following code to your newly created MY_Loader.php file:

<?php  if ( ! defined('BASEPATH')) exit('No direct script access allowed');

// written by AJ  [email protected]

class MY_Loader extends CI_Loader 
{
    protected $_my_controller_paths     = array();  

    protected $_my_controllers          = array();


    public function __construct()
    {
        parent::__construct();

        $this->_my_controller_paths = array(APPPATH);
    }

    public function controller($controller, $name = '', $db_conn = FALSE)
    {
        if (is_array($controller))
        {
            foreach ($controller as $babe)
            {
                $this->controller($babe);
            }
            return;
        }

        if ($controller == '')
        {
            return;
        }

        $path = '';

        // Is the controller in a sub-folder? If so, parse out the filename and path.
        if (($last_slash = strrpos($controller, '/')) !== FALSE)
        {
            // The path is in front of the last slash
            $path = substr($controller, 0, $last_slash + 1);

            // And the controller name behind it
            $controller = substr($controller, $last_slash + 1);
        }

        if ($name == '')
        {
            $name = $controller;
        }

        if (in_array($name, $this->_my_controllers, TRUE))
        {
            return;
        }

        $CI =& get_instance();
        if (isset($CI->$name))
        {
            show_error('The controller name you are loading is the name of a resource that is already being used: '.$name);
        }

        $controller = strtolower($controller);

        foreach ($this->_my_controller_paths as $mod_path)
        {
            if ( ! file_exists($mod_path.'controllers/'.$path.$controller.'.php'))
            {
                continue;
            }

            if ($db_conn !== FALSE AND ! class_exists('CI_DB'))
            {
                if ($db_conn === TRUE)
                {
                    $db_conn = '';
                }

                $CI->load->database($db_conn, FALSE, TRUE);
            }

            if ( ! class_exists('CI_Controller'))
            {
                load_class('Controller', 'core');
            }

            require_once($mod_path.'controllers/'.$path.$controller.'.php');

            $controller = ucfirst($controller);

            $CI->$name = new $controller();

            $this->_my_controllers[] = $name;
            return;
        }

        // couldn't find the controller
        show_error('Unable to locate the controller you have specified: '.$controller);
    }

}

Now you can load all the controllers in your application/controllers directory. for example:

load the controller class Invoice and execute the function test()

$this->load->controller('invoice','invoice_controller');

$this->invoice_controller->test();

or when the class is within a dir

$this->load->controller('/dir/invoice','invoice_controller');

$this->invoice_controller->test();

It just works the same like loading a model

The OP asks about detatching matplotlib plots. Most answers assume command execution from within a python interpreter. The use-case presented here is my preference for testing code in a terminal (e.g. bash) where a file.py is run and you want the plot(s) to come up but the python script to complete and return to a command prompt.

This stand-alone file uses multiprocessing to launch a separate process for plotting data with matplotlib. The main thread exits using the os._exit(1) mentioned in this post. The os._exit() forces main to exit but leaves the matplotlib child process alive and responsive until the plot window is closed. It's a separate process entirely.

This approach is a bit like a Matlab development session with figure windows that come up with a responsive command prompt. With this approach, you have lost all contact with the figure window process, but, that's ok for development and debugging. Just close the window and keep testing.

multiprocessing is designed for python-only code execution which makes it perhaps better suited than subprocess. multiprocessing is cross-platform so this should work well in Windows or Mac with little or no adjustment. There is no need to check the underlying operating system. This was tested on linux, Ubuntu 18.04LTS.

#!/usr/bin/python3

import time
import multiprocessing
import os

def plot_graph(data):
    from matplotlib.pyplot import plot, draw, show
    print("entered plot_graph()")
    plot(data)
    show() # this will block and remain a viable process as long as the figure window is open
    print("exiting plot_graph() process")

if __name__ == "__main__":
    print("starting __main__")
    multiprocessing.Process(target=plot_graph, args=([1, 2, 3],)).start()
    time.sleep(5)
    print("exiting main")
    os._exit(0) # this exits immediately with no cleanup or buffer flushing

Running file.py brings up a figure window, then __main__ exits but the multiprocessing + matplotlib figure window remains responsive with zoom, pan, and other buttons because it is an independent process.

Check the processes at the bash command prompt with:

ps ax|grep -v grep |grep file.py

It's because you have included a leading / in your file path. The / makes it start at the top of your filesystem. Note: filesystem path, not Web site path (you're not accessing it over HTTP). You can use a relative path with include_once (one that doesn't start with a leading /).

You can change it to this:

include_once 'headerSite.php';

That will look first in the same directory as the file that's including it (i.e. C:\xampp\htdocs\PoliticalForum\ in your example.

sp_helptext [dbname.spname] try this

Try this, Its work for me, get data between test word.

$str = "Xdata test HD01 test 1data";  
$result = explode('test',$str);   
print_r($result);
echo $result[1];

This is the one that works for me:

SELECT DISTINCT 
    local_tcp_port 
FROM sys.dm_exec_connections 
WHERE local_tcp_port IS NOT NULL 

Are you looking for this selector?:

.ui-menu .ui-menu-item a{
    background:red;
    height:10px;
    font-size:8px;
}

Ugly demo:

http://jsfiddle.net/zeSTc/

Just replace with your code:

.ui-menu .ui-menu-item a{
    color: #96f226;
    border-radius: 0px;
    border: 1px solid #454545;
}

demo: http://jsfiddle.net/w5Dt2/

Open Chrome Developer Tools, go to Network tab, make your request (you may need to check "Preserve Log" if the page refreshes). Find the request on the left, right-click, "Copy as cURL".

To read a property of an object you use .propertyName or ["propertyName"] notation.

This is no different for elements.

var name = $('#item')[0].name;
var name = $('#item')[0]["name"];

If you specifically want to use jQuery methods, then you'd use the .prop() method.

var name = $('#item').prop('name');

Please note that attributes and properties are not necessarily the same.

If you want to add an image only for the special content on the page or for only one page the you should use IMG tag and if you want to put image on more than one pages then you should use CSS Background Image.

(?<!1\.2\.3\.4).*Has exploded

You need to run this with -P to have negative lookbehind (Perl regular expression), so the command is:

grep -P '(?<!1\.2\.3\.4).*Has exploded' test.log

Try this. It uses negative lookbehind to ignore the line if it is preceeded by 1.2.3.4. Hope that helps!

first select the table you you would like to make the relation with >> then go to operation , for each table there is difference operation setting, >> inside operation "storage engine" choose innoDB option

innoDB will allow you to view the "relation view" which will help you make the foreign key

As stated, use TextView.setText(Html.fromHtml(String))

And use these tags in your Html formatted string:

<a href="...">
<b>
<big>
<blockquote>
<br>
<cite>
<dfn>
<div align="...">
<em>
<font size="..." color="..." face="...">
<h1>
<h2>
<h3>
<h4>
<h5>
<h6>
<i>
<img src="...">
<p>
<small>
<strike>
<strong>
<sub>
<sup>
<tt>
<u>

http://commonsware.com/blog/Android/2010/05/26/html-tags-supported-by-textview.html

Make 'maven.test.skip' as false in pom file, while building project test reource will come under test-classes.

<maven.test.skip>false</maven.test.skip>

It's not always just a default constraint that prevents from droping a column and sometimes indexes can also block you from droping the constraint. So I wrote a procedure that drops any index or constraint on a column and the column it self at the end.

IF OBJECT_ID ('ADM_delete_column', 'P') IS NOT NULL
   DROP procedure ADM_delete_column;
GO

CREATE procedure ADM_delete_column
    @table_name_in  nvarchar(300)
,   @column_name_in nvarchar(300)
AS 
BEGIN
    /*  Author: Matthis ([email protected] at 2019.07.20)
        License CC BY (creativecommons.org)
        Desc:   Administrative procedure that drops columns at MS SQL Server
                - if there is an index or constraint on the column 
                    that will be dropped in advice
                => input parameters are TABLE NAME and COLUMN NAME as STRING
    */
    SET NOCOUNT ON

    --drop index if exist (search first if there is a index on the column)
    declare @idx_name VARCHAR(100)
    SELECT  top 1 @idx_name = i.name
    from    sys.tables t
    join    sys.columns c
    on      t.object_id = c.object_id
    join    sys.index_columns ic
    on      c.object_id = ic.object_id
    and     c.column_id = ic.column_id
    join    sys.indexes i
    on      i.object_id = ic.object_id
    and     i.index_id = ic.index_id
    where   t.name like @table_name_in
    and     c.name like @column_name_in
    if      @idx_name is not null
    begin 
        print concat('DROP INDEX ', @idx_name, ' ON ', @table_name_in)
        exec ('DROP INDEX ' + @idx_name + ' ON ' + @table_name_in)
    end

    --drop fk constraint if exist (search first if there is a constraint on the column)
    declare @fk_name VARCHAR(100)
    SELECT  top 1 @fk_name = CONSTRAINT_NAME 
    from    INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE
    where   TABLE_NAME like @table_name_in
    and     COLUMN_NAME like @column_name_in
    if      @fk_name is not null
    begin 
        print concat('ALTER TABLE ', @table_name_in, ' DROP CONSTRAINT ', @fk_name)
        exec ('ALTER TABLE ' + @table_name_in + ' DROP CONSTRAINT ' + @fk_name)
    end

    --drop column if exist
    declare @column_name VARCHAR(100)
    SELECT  top 1 @column_name = COLUMN_NAME 
    FROM    INFORMATION_SCHEMA.COLUMNS 
    WHERE   COLUMN_NAME like concat('%',@column_name_in,'%')
    if  @column_name is not null
    begin 
        print concat('ALTER TABLE ', @table_name_in, ' DROP COLUMN ', @column_name)
        exec ('ALTER TABLE ' + @table_name_in + ' DROP COLUMN ' + @column_name)
    end
end;
GO


--to run the procedure use this execute and fill the parameters 
execute ADM_delete_column 
    @table_name_in  = ''
,   @column_name_in = ''
    ;

Try

out=$(cat)

Then paste your lines and press Ctrl-D (insert EOF character). All input till Ctrl-D will be redirected to cat's stdout.

This will work:

#!/usr/bin/expect -f

spawn scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no file1 file2 file3 user@host:/path/
expect "password:"
send "xyz123\r"
expect "*\r"
expect "\r"
interact

This works fine. just insert your jquery code in document.ready function.

 $(document).ready(function(e) {   
    // your code here
 });

example:

jquery

    $(document).ready(function(e) {   

      $('[id^=\"btnRight\"]').click(function (e) {    
        $(this).prev('select').find('option:selected').remove().appendTo('#isselect_code');    
      });

      $('[id^=\"btnLeft\"]').click(function (e) {
        $(this).next('select').find('option:selected').remove().appendTo('#canselect_code');
      });

    });

html

    <div>
        <select id='canselect_code' name='canselect_code' multiple class='fl'>
            <option value='1'>toto</option>
            <option value='2'>titi</option>
        </select>
        <input type='button' id='btnRight_code' value='  >  ' />
        <br>
        <input type='button' id='btnLeft_code' value='  <  ' />
        <select id='isselect_code' name='isselect_code' multiple class='fr'>
            <option value='3'>tata</option>
            <option value='4'>tutu</option>
        </select>
    </div>

Neither restclient nor REST console support this but curl does.

The HTTP specification says in section 4.3

A message-body MUST NOT be included in a request if the specification of the request method (section 5.1.1) does not allow sending an entity-body in requests.

Section 5.1.1 redirects us to section 9.x for the various methods. None of them explicitly prohibit the inclusion of a message body. However...

Section 5.2 says

The exact resource identified by an Internet request is determined by examining both the Request-URI and the Host header field.

and Section 9.3 says

The GET method means retrieve whatever information (in the form of an entity) is identified by the Request-URI.

Which together suggest that when processing a GET request, a server is not required to examine anything other that the Request-URI and Host header field.

In summary, the HTTP spec doesn't prevent you from sending a message-body with GET but there is sufficient ambiguity that it wouldn't surprise me if it was not supported by all servers.

In ES6, you can simply utilize the Spread syntax.

Example:

let arr = ['a', 'b', 'c'];
let arr2 = [...arr];

Please note that the spread operator generates a completely new array, so modifying one won't affect the other.

Example:

arr2.push('d') // becomes ['a', 'b', 'c', 'd']
console.log(arr) // while arr retains its values ['a', 'b', 'c']

You can modify with the following

<li><a href="./Index" class="elements"><span>Clients</span></a></li>

The extra dot means you are in the same controller. If you want change the controller to a different controller then you can write this

<li><a href="../newController/Index" class="elements"><span>Clients</span></a></li>

{
    "VALIDATON_ERROR": {
        "code": 512,
        "message": "Validation error"
    },
    "CONTINUE": {
        "code": 100,
        "message": "Continue"
    },
    "SWITCHING_PROTOCOLS": {
        "code": 101,
        "message": "Switching Protocols"
    },
    "PROCESSING": {
        "code": 102,
        "message": "Processing"
    },
    "OK": {
        "code": 200,
        "message": "OK"
    },
    "CREATED": {
        "code": 201,
        "message": "Created"
    },
    "ACCEPTED": {
        "code": 202,
        "message": "Accepted"
    },
    "NON_AUTHORITATIVE_INFORMATION": {
        "code": 203,
        "message": "Non Authoritative Information"
    },
    "NO_CONTENT": {
        "code": 204,
        "message": "No Content"
    },
    "RESET_CONTENT": {
        "code": 205,
        "message": "Reset Content"
    },
    "PARTIAL_CONTENT": {
        "code": 206,
        "message": "Partial Content"
    },
    "MULTI_STATUS": {
        "code": 207,
        "message": "Multi-Status"
    },
    "MULTIPLE_CHOICES": {
        "code": 300,
        "message": "Multiple Choices"
    },
    "MOVED_PERMANENTLY": {
        "code": 301,
        "message": "Moved Permanently"
    },
    "MOVED_TEMPORARILY": {
        "code": 302,
        "message": "Moved Temporarily"
    },
    "SEE_OTHER": {
        "code": 303,
        "message": "See Other"
    },
    "NOT_MODIFIED": {
        "code": 304,
        "message": "Not Modified"
    },
    "USE_PROXY": {
        "code": 305,
        "message": "Use Proxy"
    },
    "TEMPORARY_REDIRECT": {
        "code": 307,
        "message": "Temporary Redirect"
    },
    "PERMANENT_REDIRECT": {
        "code": 308,
        "message": "Permanent Redirect"
    },
    "BAD_REQUEST": {
        "code": 400,
        "message": "Bad Request"
    },
    "UNAUTHORIZED": {
        "code": 401,
        "message": "Unauthorized"
    },
    "PAYMENT_REQUIRED": {
        "code": 402,
        "message": "Payment Required"
    },
    "FORBIDDEN": {
        "code": 403,
        "message": "Forbidden"
    },
    "NOT_FOUND": {
        "code": 404,
        "message": "Not Found"
    },
    "METHOD_NOT_ALLOWED": {
        "code": 405,
        "message": "Method Not Allowed"
    },
    "NOT_ACCEPTABLE": {
        "code": 406,
        "message": "Not Acceptable"
    },
    "PROXY_AUTHENTICATION_REQUIRED": {
        "code": 407,
        "message": "Proxy Authentication Required"
    },
    "REQUEST_TIMEOUT": {
        "code": 408,
        "message": "Request Timeout"
    },
    "CONFLICT": {
        "code": 409,
        "message": "Conflict"
    },
    "GONE": {
        "code": 410,
        "message": "Gone"
    },
    "LENGTH_REQUIRED": {
        "code": 411,
        "message": "Length Required"
    },
    "PRECONDITION_FAILED": {
        "code": 412,
        "message": "Precondition Failed"
    },
    "REQUEST_TOO_LONG": {
        "code": 413,
        "message": "Request Entity Too Large"
    },
    "REQUEST_URI_TOO_LONG": {
        "code": 414,
        "message": "Request-URI Too Long"
    },
    "UNSUPPORTED_MEDIA_TYPE": {
        "code": 415,
        "message": "Unsupported Media Type"
    },
    "REQUESTED_RANGE_NOT_SATISFIABLE": {
        "code": 416,
        "message": "Requested Range Not Satisfiable"
    },
    "EXPECTATION_FAILED": {
        "code": 417,
        "message": "Expectation Failed"
    },
    "IM_A_TEAPOT": {
        "code": 418,
        "message": "I'm a teapot"
    },
    "INSUFFICIENT_SPACE_ON_RESOURCE": {
        "code": 419,
        "message": "Insufficient Space on Resource"
    },
    "METHOD_FAILURE": {
        "code": 420,
        "message": "Method Failure"
    },
    "UNPROCESSABLE_ENTITY": {
        "code": 422,
        "message": "Unprocessable Entity"
    },
    "LOCKED": {
        "code": 423,
        "message": "Locked"
    },
    "FAILED_DEPENDENCY": {
        "code": 424,
        "message": "Failed Dependency"
    },
    "PRECONDITION_REQUIRED": {
        "code": 428,
        "message": "Precondition Required"
    },
    "TOO_MANY_REQUESTS": {
        "code": 429,
        "message": "Too Many Requests"
    },
    "REQUEST_HEADER_FIELDS_TOO_LARGE": {
        "code": 431,
        "message": "Request Header Fields Too"
    },
    "UNAVAILABLE_FOR_LEGAL_REASONS": {
        "code": 451,
        "message": "Unavailable For Legal Reasons"
    },
    "INTERNAL_SERVER_ERROR": {
        "code": 500,
        "message": "Internal Server Error"
    },
    "NOT_IMPLEMENTED": {
        "code": 501,
        "message": "Not Implemented"
    },
    "BAD_GATEWAY": {
        "code": 502,
        "message": "Bad Gateway"
    },
    "SERVICE_UNAVAILABLE": {
        "code": 503,
        "message": "Service Unavailable"
    },
    "GATEWAY_TIMEOUT": {
        "code": 504,
        "message": "Gateway Timeout"
    },
    "HTTP_VERSION_NOT_SUPPORTED": {
        "code": 505,
        "message": "HTTP Version Not Supported"
    },
    "INSUFFICIENT_STORAGE": {
        "code": 507,
        "message": "Insufficient Storage"
    },
    "NETWORK_AUTHENTICATION_REQUIRED": {
        "code": 511,
        "message": "Network Authentication Required"
    }
}

Below using reflection seems to me a better option considering public properties as with this you don't have have to worry about addition / removal of properties (although not so common scenario). This I found to be performing better also.(Compared time using Diagonistics stop watch).

    public int getHashCode()
    {
        PropertyInfo[] theProperties = this.GetType().GetProperties();
        int hash = 31;
        foreach (PropertyInfo info in theProperties)
        {
            if (info != null)
            {
                var value = info.GetValue(this,null);
                if(value != null)
                unchecked
                {
                    hash = 29 * hash ^ value.GetHashCode();
                }
            }
        }
        return hash;  
    }

As mentioned in previous answers, both serve almost same purpose. Personally I like git rebase and merge request (as in gitlab). It takes burden off of the reviewer/maintainer, making sure that while adding merge request, the feature branch includes all of the latest commits done on main branch after feature branch is created. Here is a very useful article explaining rebase in detail: https://git-scm.com/book/en/v2/Git-Branching-Rebasing

This is the answer:

numCols = objSheet.UsedRange.Columns.count

Documentation of the UsedRange property

Add the NUnit test adapter NuGet package to your test projects

• 2.* (https://www.nuget.org/packages/NUnitTestAdapter/)
• 3.* (https://www.nuget.org/packages/NUnit3TestAdapter/)

Or install the Test Adapter Visual Studio extension. There is one for

• 2.* (https://marketplace.visualstudio.com/items?itemName=NUnitDevelopers.NUnitTestAdapter)
• 3.* (https://marketplace.visualstudio.com/items?itemName=NUnitDevelopers.NUnit3TestAdapter).

I prefer the NuGet package, because it will be in sync with the NUnit version used by your project and will thus automatically match the version used in any build server.

SELECT a.salesorderid, a.orderdate, s.orderdate, s.salesorderid
FROM A a
OUTER APPLY (SELECT top(1) *
             FROM B b WHERE a.salesorderid = b.salesorderid) as s
WHERE A.Date BETWEEN '2000-1-4' AND '2010-1-4'

The ultimate curl php function:

function getURL($url,$fields=null,$method=null,$file=null){
    // author   = Ighor Toth <[email protected]>
    // required:
    //      url     = include http or https 
    // optionals:
    //      fields  = must be array (e.g.: 'field1' => $field1, ...)
    //      method  = "GET", "POST"
    //      file    = if want to download a file, declare store location and file name (e.g.: /var/www/img.jpg, ...)
    // please crete 'cookies' dir to store local cookies if neeeded

    // do not modify below
    $useragent = 'Mozilla/5.0 (Windows NT 6.3; Trident/7.0; rv:11.0) like Gecko';
    $timeout= 240;
    $dir = dirname(__FILE__);
    $_SERVER["REMOTE_ADDR"] = $_SERVER["REMOTE_ADDR"] ?? '127.0.0.1';
    $cookie_file    = $dir . '/cookies/' . md5($_SERVER['REMOTE_ADDR']) . '.txt';
    $ch = curl_init($url);
    curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, 0);
    curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 0);    
    curl_setopt($ch, CURLOPT_FAILONERROR, true);
    curl_setopt($ch, CURLOPT_HEADER, 0);
    curl_setopt($ch, CURLOPT_COOKIEFILE, $cookie_file);
    curl_setopt($ch, CURLOPT_COOKIEJAR, $cookie_file);
    curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true );
    curl_setopt($ch, CURLOPT_ENCODING, "" );
    curl_setopt($ch, CURLOPT_RETURNTRANSFER, true );
    curl_setopt($ch, CURLOPT_AUTOREFERER, true );
    curl_setopt($ch, CURLOPT_MAXREDIRS, 10 );
    curl_setopt($ch, CURLOPT_USERAGENT, $useragent);
    curl_setopt($ch, CURLOPT_REFERER, 'http://www.google.com/');
    if($file!=null){
        if (!curl_setopt($ch, CURLOPT_FILE, $file)){ // Handle error
                die("curl setopt bit the dust: " . curl_error($ch));
        }
        //curl_setopt($ch, CURLOPT_FILE, $file);
        $timeout= 3600;
    }
    curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $timeout );
    curl_setopt($ch, CURLOPT_TIMEOUT, $timeout );
    if($fields!=null){
        $postvars = http_build_query($fields); // build the urlencoded data
        if($method=="POST"){
            // set the url, number of POST vars, POST data
            curl_setopt($ch, CURLOPT_POST, count($fields));
            curl_setopt($ch, CURLOPT_POSTFIELDS, $postvars);
        }
        if($method=="GET"){
            curl_setopt($ch, CURLOPT_CUSTOMREQUEST, 'GET');
            $url = $url.'?'.$postvars;
        }
    }
    curl_setopt($ch, CURLOPT_URL, $url);
    $content = curl_exec($ch);
    if (!$content){
        $error = curl_error($ch);
        $info = curl_getinfo($ch);
        die("cURL request failed, error = {$error}; info = " . print_r($info, true));
    }
    if(curl_errno($ch)){
        echo 'error:' . curl_error($ch);
    } else {
        return $content;        
    }
    curl_close($ch);
}

PHP 7.3 added two functions for getting the first and the last key of an array directly without modification of the original array and without creating any temporary objects:

• array_key_first
• array_key_last

Apart from being semantically meaningful, these functions don't even move the array pointer (as foreach would do).

Having the keys, one can get the values by the keys directly.

Examples (all of them require PHP 7.3+)

Getting the first/last key and value:

$my_array = ['IT', 'rules', 'the', 'world'];

$first_key = array_key_first($my_array);
$first_value = $my_array[$first_key];

$last_key = array_key_last($my_array);
$last_value = $my_array[$last_key];

Getting the first/last value as one-liners, assuming the array cannot be empty:

$first_value = $my_array[ array_key_first($my_array) ];

$last_value = $my_array[ array_key_last($my_array) ];

Getting the first/last value as one-liners, with defaults for empty arrays:

$first_value = empty($my_array) ? 'default' : $my_array[ array_key_first($my_array) ];

$last_value = empty($my_array) ? 'default' : $my_array[ array_key_last($my_array) ];

This will work if your route looks like this: localhost:8888/p?tagid=1234

var tagId = req.query.tagid;
console.log(tagId); // outputs: 1234
console.log(req.query.tagid); // outputs: 1234

Otherwise use the following code if your route looks like this: localhost:8888/p/1234

var tagId = req.params.tagid;
console.log(tagId); // outputs: 1234
console.log(req.params.tagid); // outputs: 1234

Just add:

left: calc(-50vw + 50%);
right: calc(-50vw + 50%);
margin-left: auto;
margin-right: auto;

One reason why you might prefer to use a JOIN rather than NOT IN is that if the Values in the NOT IN clause contain any NULLs you will always get back no results. If you do use NOT IN remember to always consider whether the sub query might bring back a NULL value!

RE: Question in Comments

'x' NOT IN (NULL,'a','b')

= 'x' <> NULL and 'x' <> 'a' and 'x' <> 'b'

= Unknown and True and True

= Unknown

Apparently, org.json.simple.JSONArray implements a raw Iterator. This means that each element is considered to be an Object. You can try to cast:

for(Object o: arr){
    if ( o instanceof JSONObject ) {
        parse((JSONObject)o);
    }
}

This is how things were done back in Java 1.4 and earlier.

Couldn't your query just be written as:

SELECT u1.name as UserName from Message m1, User u1 
  WHERE u1.uid = m1.UserFromID GROUP BY u1.name HAVING count(m1.UserFromId)>3

That should also help with the known speed issues with subqueries in MySQL

You may have more than one org.springframework.beans.factory.config.PropertyPlaceholderConfigurer in your application. Try setting a breakpoint on the setLocations method of the superclass and see if it's called more than once at application startup. If there is more than one org.springframework.beans.factory.config.PropertyPlaceholderConfigurer, you might need to look at configuring the ignoreUnresolvablePlaceholders property so that your application will start up cleanly.

In my case error was due to the fact that I had two keys on the keychain with the same name. I deleted the old one and that solved the issue.

Going to the detail message show the real problem to me.

You can use expand.grid( ) function.

x <-c(1,2,3)
y <-c(100,200,300)
expand.grid(cond=x,rating=y)

In the first situation, Num2 is extending the class Num and since you are not redefining the special method named __init__() in Num2, it gets inherited from Num.

When a class defines an __init__() method, class instantiation automatically invokes __init__() for the newly-created class instance.

In the second situation, since you are redefining __init__() in Num2 you need to explicitly call the one in the super class (Num) if you want to extend its behavior.

class Num2(Num):
    def __init__(self,num):
        Num.__init__(self,num)
        self.n2 = num*2

It does appear red on Firefox and IE 8. But perhaps you need to change the border-style too.

.field_set{_x000D_
  border-color: #F00;_x000D_
  border-style: solid;_x000D_
}

<fieldset class="field_set">_x000D_
  <legend>box</legend>_x000D_
  <table width="100%" border="0" cellspacing="0" cellpadding="0">_x000D_
    <tr>_x000D_
      <td>&nbsp;</td>_x000D_
    </tr>_x000D_
  </table>_x000D_
</fieldset>

I have created an open source jQuery File Download plugin (Demo with examples) (GitHub) which could also help with your situation. It works pretty similarly with an iframe but has some cool features that I have found quite handy:

• User never leaves the same page they initiated a file download from. This feature is becoming crucial for modern web applications
• Tested cross browser support (including mobile!)
• It supports POST and GET requests in a manner similar to jQuery's AJAX API
• successCallback and failCallback functions allow for you to be explicit about what the user sees in either situation
• In conjunction with jQuery UI a developer can easily show a modal telling the user that a file download is occurring, disband the modal after the download starts or even inform the user in a friendly manner that an error has occurred. See the Demo for an example of this.

select u from UserGroup ug inner join ug.user u 
where ug.group_id = :groupId 
order by u.lastname

As a named query:

@NamedQuery(
  name = "User.findByGroupId",
  query =
    "SELECT u FROM UserGroup ug " +
    "INNER JOIN ug.user u WHERE ug.group_id = :groupId ORDER BY u.lastname"
)

Use paths in the HQL statement, from one entity to the other. See the Hibernate documentation on HQL and joins for details.

This is a common question in C++ programming. There are two valid answers to this. There are advantages and disadvantages to both answers and your choice will depend on context. The common answer is to put all the implementation in the header file, but there's another approach will will be suitable in some cases. The choice is yours.

The code in a template is merely a 'pattern' known to the compiler. The compiler won't compile the constructors cola<float>::cola(...) and cola<string>::cola(...) until it is forced to do so. And we must ensure that this compilation happens for the constructors at least once in the entire compilation process, or we will get the 'undefined reference' error. (This applies to the other methods of cola<T> also.)

Understanding the problem

The problem is caused by the fact that main.cpp and cola.cpp will be compiled separately first. In main.cpp, the compiler will implicitly instantiate the template classes cola<float> and cola<string> because those particular instantiations are used in main.cpp. The bad news is that the implementations of those member functions are not in main.cpp, nor in any header file included in main.cpp, and therefore the compiler can't include complete versions of those functions in main.o. When compiling cola.cpp, the compiler won't compile those instantiations either, because there are no implicit or explicit instantiations of cola<float> or cola<string>. Remember, when compiling cola.cpp, the compiler has no clue which instantiations will be needed; and we can't expect it to compile for every type in order to ensure this problem never happens! (cola<int>, cola<char>, cola<ostream>, cola< cola<int> > ... and so on ...)

The two answers are:

• Tell the compiler, at the end of cola.cpp, which particular template classes will be required, forcing it to compile cola<float> and cola<string>.
• Put the implementation of the member functions in a header file that will be included every time any other 'translation unit' (such as main.cpp) uses the template class.

Answer 1: Explicitly instantiate the template, and its member definitions

At the end of cola.cpp, you should add lines explicitly instantiating all the relevant templates, such as

template class cola<float>;
template class cola<string>;

and you add the following two lines at the end of nodo_colaypila.cpp:

template class nodo_colaypila<float>;
template class nodo_colaypila<std :: string>;

This will ensure that, when the compiler is compiling cola.cpp that it will explicitly compile all the code for the cola<float> and cola<string> classes. Similarly, nodo_colaypila.cpp contains the implementations of the nodo_colaypila<...> classes.

In this approach, you should ensure that all the of the implementation is placed into one .cpp file (i.e. one translation unit) and that the explicit instantation is placed after the definition of all the functions (i.e. at the end of the file).

Answer 2: Copy the code into the relevant header file

The common answer is to move all the code from the implementation files cola.cpp and nodo_colaypila.cpp into cola.h and nodo_colaypila.h. In the long run, this is more flexible as it means you can use extra instantiations (e.g. cola<char>) without any more work. But it could mean the same functions are compiled many times, once in each translation unit. This is not a big problem, as the linker will correctly ignore the duplicate implementations. But it might slow down the compilation a little.

Summary

The default answer, used by the STL for example and in most of the code that any of us will write, is to put all the implementations in the header files. But in a more private project, you will have more knowledge and control of which particular template classes will be instantiated. In fact, this 'bug' might be seen as a feature, as it stops users of your code from accidentally using instantiations you have not tested for or planned for ("I know this works for cola<float> and cola<string>, if you want to use something else, tell me first and will can verify it works before enabling it.").

Finally, there are three other minor typos in the code in your question:

• You are missing an #endif at the end of nodo_colaypila.h
• in cola.h nodo_colaypila<T>* ult, pri; should be nodo_colaypila<T> *ult, *pri; - both are pointers.
• nodo_colaypila.cpp: The default parameter should be in the header file nodo_colaypila.h, not in this implementation file.

Absolute XPath: It is the direct way to find the element, but the disadvantage of the absolute XPath is that if there are any changes made in the path of the element then that XPath gets failed.

The key characteristic of XPath is that it begins with the single forward slash(/) ,which means you can select the element from the root node.

Below is the example of an absolute xpath.

/html/body/div[1]/section/div/div[2]/div/form/div[2]/input[3]

Relative Xpath: Relative Xpath starts from the middle of HTML DOM structure. It starts with double forward slash (//). It can search elements anywhere on the webpage, means no need to write a long xpath and you can start from the middle of HTML DOM structure. Relative Xpath is always preferred as it is not a complete path from the root element.

Below is the example of a relative XPath.

//input[@name=’email’]

The best way to find the key for a particular value is to use key method that is available for a hash....

gender = {"MALE" => 1, "FEMALE" => 2}
gender.key(1) #=> MALE

I hope it solves your problem...

Instance variable is the variable declared inside a class, but outside a method: something like:

class IronMan {

    /** These are all instance variables **/
    public String realName;
    public String[] superPowers;
    public int age;

    /** Getters and setters here **/
}

Now this IronMan Class can be instantiated in another class to use these variables. Something like:

class Avengers {

    public static void main(String[] a) {
        IronMan ironman = new IronMan();
        ironman.realName = "Tony Stark";
        // or
        ironman.setAge(30);
    }

}

This is how we use the instance variables. Shameless plug: This example was pulled from this free e-book here here.

You will want to take a look in to WordPress' plugin API.

This explains how to "hook" and "filter" in to different parts of the WordPress mechanics, so you can execute custom PHP code pretty much anywhere at any given time. This hooking, filtering, and custom code authoring can all take place in your functions.php file in any of your themes. Happy coding :)

• WordPress Plugin API
• WordPress Hooks/Filter Database
• WordPress PHPXHref by Yoast

AngularJs has "Services" and "Factories" just for problems like yours.These are used to have something global between Controllers, Directives, Other Services or any other angularjs components..You can defined functions, store data, make calculate functions or whatever you want inside Services and use them in AngularJs Components as Global.like

angular.module('MyModule', [...])
  .service('MyService', ['$http', function($http){
    return {
       users: [...],
       getUserFriends: function(userId){
          return $http({
            method: 'GET',
            url: '/api/user/friends/' + userId
          });
       }
       ....
    }
  }])

if you need more

Find More About Why We Need AngularJs Services and Factories

"Chrome violations" don't represent errors in either Chrome or your own web app. They are instead warnings to help you improve your app. In this case, Long running JavaScript and took 83ms of runtime are alerting you there's probably an opportunity to speed up your script.

("Violation" is not the best terminology; it's used here to imply the script "violates" a pre-defined guideline, but "warning" or similar would be clearer. These messages first appeared in Chrome in early 2017 and should ideally have a "More info" prompt to elaborate on the meaning and give suggested actions to the developer. Hopefully those will be added in the future.)

You should definitely have a look at this answer of mine:

• Extracting table contents from a collection of PDF files

and also have a look at all the links included therein.

Tabula/TabulaPDF is currently the best table extraction tool that is available for PDF scraping.

You need to disable Script Debugging In Visual Studio

You can also read up on the ILIKE keyword. It can be quite useful at times, albeit it does not conform to the SQL standard. See here for more information: http://www.postgresql.org/docs/9.2/static/functions-matching.html

Check this out:

Cities of the world database donated by MaxMind.com

The company MaxMind.com1 has agreed to release their cities of the world database under the GPL. The database contains locations by country, city, latitude and longitude. There are over 3,047,000 records in the database. For those of you who have tried the location.module with the zipcodes database from CivicSpace, you will recognize how cool it is and how well this fits with that project and therefore Drupal.

Here's another free one that might help you get started.

Creating and maintaining such a database is quite a bit of work - so anyone who's done it is likely keeping it to themselves, or offering it for a fee.

By default Build location is in Derived Data.

Please note: a path to a product can be changed if you delete DerivedData during development process and rebuild it again.

Xcode -> Preferences... -> Locations 

You can change the location of Build location. It will have an effect on the whole workspace

File -> Project/Workspace Settings... -> Advanced 

You can change the location of Target using:

Project editor -> select a target -> Build Settings -> Per-configuration Build Products Path

The default value is$(BUILD_DIR)/$(CONFIGURATION)$(EFFECTIVE_PLATFORM_NAME)

It makes sense if you want to create an autonomic Build location

Xcode 10.2.1

Go to this link and wait for a while to load.

http://www.java.com/en/download/testjava.jsp

You will see the below image:

You can alternatively open command window and type java -version

Just a matter of the right google search:

data = dat_1.append(dat_2)
data = data.groupby(data.index).sum()

$ su - postgres
$ psql
$ \du; for see the user on db
select the user that do you want be superuser and:
$ ALTER USER "user" with superuser;

Here is another option to see if a cell exists inside a range. In case you have issues with the Intersect solution as I did.

If InStr(range("NamedRange").Address, range("IndividualCell").Address) > 0 Then
    'The individual cell exists in the named range
Else
    'The individual cell does not exist in the named range
End If

InStr is a VBA function that checks if a string exists within another string.

https://msdn.microsoft.com/en-us/vba/language-reference-vba/articles/instr-function

I think Jon Skeet has the correct answer. I'd just like to add that you can access shadowed variables from superclasses of superclasses by casting this:

interface I { int x = 0; }
class T1 implements I { int x = 1; }
class T2 extends T1 { int x = 2; }
class T3 extends T2 {
        int x = 3;
        void test() {
                System.out.println("x=\t\t"          + x);
                System.out.println("super.x=\t\t"    + super.x);
                System.out.println("((T2)this).x=\t" + ((T2)this).x);
                System.out.println("((T1)this).x=\t" + ((T1)this).x);
                System.out.println("((I)this).x=\t"  + ((I)this).x);
        }
}

class Test {
        public static void main(String[] args) {
                new T3().test();
        }
}

which produces the output:

x=              3
super.x=        2
((T2)this).x=   2
((T1)this).x=   1
((I)this).x=    0

(example from the JLS)

However, this doesn't work for method calls because method calls are determined based on the runtime type of the object.

1. Go to your "play.google.com" dashboard
2. Select your app
3. In left menu item select "Store presence"
4. Then, select "Pricing & distribution"
5. Click "Unpublish" in "App Availability" section

Sounds like you really want a Dictionary<int, string> or possibly a switch statement...

You can do it with the conditional operator though:

userType = user.Type == 0 ? "Admin"
         : user.Type == 1 ? "User"
         : user.Type == 2 ? "Employee"
         : "The default you didn't specify";

While you could put that in one line, I'd strongly urge you not to.

I would normally only do this for different conditions though - not just several different possible values, which is better handled in a map.

Using configure() method two times is responsible the problem for me. Instead of using like this :

    Configuration configuration = new Configuration().configure();
    configuration.configure("/main/resources/hibernate.cfg.xml");

Now, I am using like this, problem does not exist anymore.

    Configuration configuration = new Configuration();
    configuration.configure("/main/resources/hibernate.cfg.xml");

P.S: My hibernate.cfg.xml file is located at "src/main/resources/hibernate.cfg.xml",too. The code belove works for me. at hibernate-5

public class HibernateUtil {

 private static SessionFactory sessionFactory ;


 static {
     try{
    Configuration configuration = new Configuration();
    configuration.configure("/main/resources/hibernate.cfg.xml");
    StandardServiceRegistryBuilder builder = new StandardServiceRegistryBuilder().applySettings(configuration.getProperties());
    sessionFactory = configuration.buildSessionFactory(builder.build());
 }
     catch(Exception e){
         e.printStackTrace();
     }
     }

public static SessionFactory getSessionFactory() {
    return sessionFactory;
}
}  

The most important difference is that gzip is only capable to compress a single file while zip compresses multiple files one by one and archives them into one single file afterwards. Thus, gzip comes along with tar most of the time (there are other possibilities, though). This comes along with some (dis)advantages.

If you have a big archive and you only need one single file out of it, you have to decompress the whole gzip file to get to that file. This is not required if you have a zip file.

On the other hand, if you compress 10 similiar or even identical files, the zip archive will be much bigger because each file is compressed individually, whereas in gzip in combination with tar a single file is compressed which is much more effective if the files are similiar (equal).

If you are using MacOS use:

sudo cp /usr/local/etc/openssl/cert.pem /etc/ssl/certs

after this Trust anchor not found error disappears

When I encountered this same error, I noticed MySQL Configuration file in "C:\Program Files\MySQL\MySQL Server X.Y\" has changed to my-default.ini

I solved it by

1. Copy my.ini from "C:\ProgramData\MySQL\MySQL Server X.Y\my.ini"
2. Paste it in "C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
3. Restart MySQL Server from services.msc

In the .ini file, their is part that reads:

# On Windows you should keep this file in the installation directory 
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option 
# "--defaults-file". 

You need to use ListBox.ItemContainerStyle.

ListBox.ItemTemplate specifies how the content of an item should be displayed. But WPF still wraps each item in a ListBoxItem control, which by default gets its Background set to the system highlight colour if it is selected. You can't stop WPF creating the ListBoxItem controls, but you can style them -- in your case, to set the Background to always be Transparent or Black or whatever -- and to do so, you use ItemContainerStyle.

juFo's answer shows one possible implementation, by "hijacking" the system background brush resource within the context of the item style; another, perhaps more idiomatic technique is to use a Setter for the Background property.

RewriteEngine On 
RewriteCond %{SERVER_PORT} 80 
RewriteRule ^(.*)$ https://%{HTTP_HOST}%{REQUEST_URI} [L,R]

I launched ubuntu Xampp server on AWS amazon. And met the same problem with FTP, even though add user to group ftp SFTP and set permissions, owner group of htdocs folder. Finally find the reason in inbound rules in security group, added All TCP, 0 - 65535 rule(0.0.0.0/0,::/0) , then working right!

To compare values you can use a comparing method-

function naturalSorter(as, bs){
    var a, b, a1, b1, i= 0, n, L,
    rx=/(\.\d+)|(\d+(\.\d+)?)|([^\d.]+)|(\.\D+)|(\.$)/g;
    if(as=== bs) return 0;
    a= as.toLowerCase().match(rx);
    b= bs.toLowerCase().match(rx);
    L= a.length;
    while(i<L){
        if(!b[i]) return 1;
        a1= a[i],
        b1= b[i++];
        if(a1!== b1){
            n= a1-b1;
            if(!isNaN(n)) return n;
            return a1>b1? 1:-1;
        }
    }
    return b[i]? -1:0;
}

But for speed in sorting an array, rig the array before sorting, so you only have to do lower case conversions and the regular expression once instead of in every step through the sort.

function naturalSort(ar, index){
    var L= ar.length, i, who, next, 
    isi= typeof index== 'number', 
    rx=  /(\.\d+)|(\d+(\.\d+)?)|([^\d.]+)|(\.(\D+|$))/g;
    function nSort(aa, bb){
        var a= aa[0], b= bb[0], a1, b1, i= 0, n, L= a.length;
        while(i<L){
            if(!b[i]) return 1;
            a1= a[i];
            b1= b[i++];
            if(a1!== b1){
                n= a1-b1;
                if(!isNaN(n)) return n;
                return a1>b1? 1: -1;
            }
        }
        return b[i]!= undefined? -1: 0;
    }
    for(i= 0; i<L; i++){
        who= ar[i];
        next= isi? ar[i][index] || '': who;
        ar[i]= [String(next).toLowerCase().match(rx), who];
    }
    ar.sort(nSort);
    for(i= 0; i<L; i++){
        ar[i]= ar[i][1];
    }
}

I am using Eclipse mars, Hibernate 5.2.1, Jdk7 and Oracle 11g.

I get the same error when I run Hibernate code generation tool. I guess it is a versions issue due to I have solved it through choosing Hibernate version (5.1 to 5.0) in the type frame in my Hibernate console configuration.

/*
 It has been answered in http://stackoverflow.com/questions/15609306/convert-string-to-json-array/33292260#33292260
 * put string into file jsonFileArr.json
 * [{"username":"Hello","email":"[email protected]","credits"
 * :"100","twitter_username":""},
 * {"username":"Goodbye","email":"[email protected]"
 * ,"credits":"0","twitter_username":""},
 * {"username":"mlsilva","email":"[email protected]"
 * ,"credits":"524","twitter_username":""},
 * {"username":"fsouza","email":"[email protected]"
 * ,"credits":"1052","twitter_username":""}]
 */

public class TestaGsonLista {

public static void main(String[] args) {
Gson gson = new Gson();
 try {
    BufferedReader br = new BufferedReader(new FileReader(
            "C:\\Temp\\jsonFileArr.json"));
    JsonArray jsonArray = new JsonParser().parse(br).getAsJsonArray();
    for (int i = 0; i < jsonArray.size(); i++) {
        JsonElement str = jsonArray.get(i);
        Usuario obj = gson.fromJson(str, Usuario.class);
        //use the add method from the list and returns it.
        System.out.println(obj);
        System.out.println(str);
        System.out.println("-------");
    }
 } catch (IOException e) {
    e.printStackTrace();
 }
}

Good question, I was just looking for alternatives to JFreeChart myself the other day. JFreeChart is excellent and very comprehensive, I've used it on several projects. My recent problem was that it meant adding 1.6mb of libraries to a 50kb applet, so I was looking for something smaller.

The JFreeChart FAQ itself lists alternatives. Compared to JFreeChart, most of them are pretty basic, and some pretty ugly. The most promising seem to be the Java Chart Construction Kit and OpenChart2.

I also found EasyCharts, which is a commercial product but seemingly free to use in some circumstances.

In the end, I went back to the tried and trusted JFreeChart and used Proguard to butcher it into a more manageable size.

I suggest that you take another look at JFreeChart. The user guide is only available to buy, but the demo shows what is possible and it's pretty easy to work out how from the API documentation. Basically you start with the ChartFactory static methods and plug the resultant JFreeChart object into a ChartPanel to display it. If you get stuck, I'm sure you'll get some quick answers to your problems on StackOverflow.

browser's back/forward button solution
I encountered the same problem and I solved it using the popstate event from the $window object and ui-router's $state object. A popstate event is dispatched to the window every time the active history entry changes.
The $stateChangeSuccess and $locationChangeSuccess events are not triggered on browser's button click even though the address bar indicates the new location.
So, assuming you've navigated from states main to folder to main again, when you hit back on the browser, you should be back to the folder route. The path is updated but the view is not and still displays whatever you have on main. try this:

angular
.module 'app', ['ui.router']
.run($state, $window) {

     $window.onpopstate = function(event) {

        var stateName = $state.current.name,
            pathname = $window.location.pathname.split('/')[1],
            routeParams = {};  // i.e.- $state.params

        console.log($state.current.name, pathname); // 'main', 'folder'

        if ($state.current.name.indexOf(pathname) === -1) {
            // Optionally set option.notify to false if you don't want 
            // to retrigger another $stateChangeStart event
            $state.go(
              $state.current.name, 
              routeParams,
              {reload:true, notify: false}
            );
        }
    };
}

back/forward buttons should work smoothly after that.

note: check browser compatibility for window.onpopstate() to be sure

Go to someplace the namespace is declared in one of your files. Put the cursor on the part of the namespace you want to change, and press F2. This should rename the namespace in every file. At least, it worked in my little demo project I created to test this answer!

Depending on your VS version, the shortcut might also be Ctrl-R,Ctrl-R.

For those who want a quick solution:

There is a way to get a output to the console similar to the output from tree, by typing the following command into your terminal:

ls -R YOURFOLDER | grep ':$' | sed -e 's/:$//' -e 's/[^\/]*\//|  /g' -e 's/|  \([^|]\)/|–– \1/g' 

This alternative is mentioned in this documentation: https://wiki.ubuntuusers.de/tree/

Then the output can be copied and encapsuled inside a .md file with code block back tics, like mentioned in Jonathas B.C.'s answer.

But be aware that it also outputs all node modules folders in a node project. And in tree you can do something like

tree -I node_modules

to exlude the node modules folder.

import csv

with open(..., 'wb') as myfile:
    wr = csv.writer(myfile, quoting=csv.QUOTE_ALL)
    wr.writerow(mylist)

Edit: this only works with python 2.x.

To make it work with python 3.x replace wb with w (see this SO answer)

with open(..., 'w', newline='') as myfile:
     wr = csv.writer(myfile, quoting=csv.QUOTE_ALL)
     wr.writerow(mylist)

Position the cursor inside the class, then press ALT + Ins and select Getters and Setters from the contextual menu.

I found one way to access the shared folder without giving the username and password.

We need to change the share folder protect settings in the machine where the folder has been shared.

Go to Control Panel > Network and sharing center > Change advanced sharing settings > Enable Turn Off password protect sharing option.

By doing the above settings we can access the shared folder without any username/password.

I had the same issue on 14.04 with docker 1.9.1.

The upstart service command did work when I used sudo, even though I was root:

$ whoami
root
$ service docker status
status: Unbekannter Auftrag: docker

$ sudo service docker status
docker start/running, process 7394

It seems to depend on the environment variables.

service docker status works when becoming root with su -, but not when only using su:

$ su
Password:
$ service docker status
status: unknown job: docker
$ exit
$ su -
Password:
$ service docker status
docker start/running, process 2342

Use FOR XML PATH('') - which is converting the entries to a comma separated string and STUFF() -which is to trim the first comma- as follows Which gives you the same comma separated result

SELECT  STUFF((SELECT  ',' + INSTITUTIONNAME
            FROM EDUCATION EE
            WHERE  EE.STUDENTNUMBER=E.STUDENTNUMBER
            ORDER BY sortOrder
        FOR XML PATH('')), 1, 1, '') AS listStr

FROM EDUCATION E
GROUP BY E.STUDENTNUMBER

Here is the FIDDLE

In my specific scenario i wanted to skip applying common styles to a specific part of the page, better illustrated like this:

<body class='common-styles'>
    <div id='header'>Wants common styles</div>
    <div id='container'>Does NOT want common styles</div>
    <div id='footer'>Wants common styles</div>
</body>

After messing with CSS reset which didn't bring much success (mainly because of rules precedence and complex stylesheet hierarchy), brought up ubiquitous jQuery to the rescue, which did the job very quickly and reasonably dirty:

$(function() {
    $('body').removeClass('common-styles');
    $('#header,#footer').addClass('common-styles');
});

(Now tell how evil it is to use JS to deal with CSS :-) )

to overwiting the previous line in python all wath you need is to add end='\r' to the print function, test this example:

import time
for j in range(1,5):
   print('waiting : '+j, end='\r')
   time.sleep(1)

I did test your code and the only problem I could see was the lack of permission given to the directory you try to write the file in to.

Give "write" permission to the directory you need to put the file. In your case it is the current directory.

Use "chmod" in linux.

Add "Everyone" with "write" enabled to the security tab of the directory if you are in Windows.

If iframe's source is an external domain, browsers will hide the iframe contents (Same Origin Policy). A workaround is saving the external contents in a file, for example (in PHP):

<?php
    $contents = file_get_contents($external_url);
    $res = file_put_contents($filename, $contents);
?>

then, get the new file content (string) and parse it to html, for example (in jquery):

$.get(file_url, function(string){
    var html = $.parseHTML(string);
    var contents = $(html).contents();
},'html');

I have a slightly different perspective on the difference between a DATETIME and a TIMESTAMP. A DATETIME stores a literal value of a date and time with no reference to any particular timezone. So, I can set a DATETIME column to a value such as '2019-01-16 12:15:00' to indicate precisely when my last birthday occurred. Was this Eastern Standard Time? Pacific Standard Time? Who knows? Where the current session time zone of the server comes into play occurs when you set a DATETIME column to some value such as NOW(). The value stored will be the current date and time using the current session time zone in effect. But once a DATETIME column has been set, it will display the same regardless of what the current session time zone is.

A TIMESTAMP column on the other hand takes the '2019-01-16 12:15:00' value you are setting into it and interprets it in the current session time zone to compute an internal representation relative to 1/1/1970 00:00:00 UTC. When the column is displayed, it will be converted back for display based on whatever the current session time zone is. It's a useful fiction to think of a TIMESTAMP as taking the value you are setting and converting it from the current session time zone to UTC for storing and then converting it back to the current session time zone for displaying.

If my server is in San Francisco but I am running an event in New York that starts on 9/1/1029 at 20:00, I would use a TIMESTAMP column for holding the start time, set the session time zone to 'America/New York' and set the start time to '2009-09-01 20:00:00'. If I want to know whether the event has occurred or not, regardless of the current session time zone setting I can compare the start time with NOW(). Of course, for displaying in a meaningful way to a perspective customer, I would need to set the correct session time zone. If I did not need to do time comparisons, then I would probably be better off just using a DATETIME column, which will display correctly (with an implied EST time zone) regardless of what the current session time zone is.

TIMESTAMP LIMITATION

The TIMESTAMP type has a range of '1970-01-01 00:00:01' UTC to '2038-01-19 03:14:07' UTC and so it may not usable for your particular application. In that case you will have to use a DATETIME type. You will, of course, always have to be concerned that the current session time zone is set properly whenever you are using this type with date functions such as NOW().

Here is a SO thread where @Matt renders only the desired pixel into a 1x1 context by displacing the image so that the desired pixel aligns with the one pixel in the context.

The only way I know to deal with this is to create a new workspace, import projects from the polluted workspace, reconstructing all my settings (a major pain) and then delete the old workspace. Is there an easier way to deal with this?

For synchronizing or restoring all our settings we use Workspace Mechanic. Once all the settings are recorded its one click and all settings are restored... You can also setup a server which provides those settings for all users.

This work for me:

<section class="h-100">
  <header class="container h-100">
    <div class="d-flex align-items-center justify-content-center h-100">
      <div class="d-flex flex-column">
        <h1 class="text align-self-center p-2">item 1</h1>
        <h4 class="text align-self-center p-2">item 2</h4>
        <button class="btn btn-danger align-self-center p-2" type="button" name="button">item 3</button>
      </div>
    </div>
  </header>
</section>

Or something like:

df.loc[df['a'].isnull(),'a']=0
df.loc[df['b'].isnull(),'b']=0

and if there is more:

for i in your_list:
    df.loc[df[i].isnull(),i]=0

I found this works

$./adb shell
$su
mount -o rw,remount rootfs /
chmod 777 /mnt/sdcard
exit

Source: http://www.coderanch.com/t/611842/Android/Mobile/Android-emulator-sdcard-writable

This could help:

public static String getCorporateID(String fileName) {

    String corporateId = null;

    try {
        corporateId = fileName.substring(0, fileName.indexOf("_"));
        // System.out.println(new Date() + ": " + "Corporate:
        // "+corporateId);
        return corporateId;
    } catch (Exception e) {
        corporateId = null;
        e.printStackTrace();
    }

    return corporateId;
}

You should not call a controller from the view.

Add a property to your view model, set it in the controller, and use it in the view.

Here is an example:

MyViewModel.cs:

public class MyViewModel
{   ...
    public bool ShowAdmin { get; set; }
}

MyController.cs:

public ViewResult GetAdminMenu()
    {
        MyViewModelmodel = new MyViewModel();            

        model.ShowAdmin = userHasPermission("Admin"); 

        return View(model);
    }

MyView.cshtml:

@model MyProj.ViewModels.MyViewModel


@if (@Model.ShowAdmin)
{
   <!-- admin links here-->
}

..\Views\Shared\ _Layout.cshtml:

    @using MyProj.ViewModels.Common;
....
    <div>    
        @Html.Action("GetAdminMenu", "Layout")
    </div>

tl;dr;

Comparing them is like comparing Restaurant food (maybe expensive sometimes, and maybe not 100% you want it) with homemade food, where you have to gather and grow each one of the ingredients on your own.

Maybe if you just want to eat an apple, the latter is better. But if you want something complicated and you're alone, it's really not worth cooking and making all the ingredients by yourself.

I've worked with both of these. Here is my experience.

SocketIO

• Has autoconnect

• Has namespaces

• Has rooms

• Has subscriptions service

• Has a pre-designed protocol of communication

  (talking about the protocol to subscribe, unsubscribe or send a message to a specific room, you must all design them yourself in websockets)

• Has good logging support

• Has integration with services such as redis

• Has fallback in case WS is not supported (well, it's more and more rare circumstance though)

• It's a library. Which means, it's actually helping your cause in every way. Websockets is a protocol, not a library, which SocketIO uses anyway.

• The whole architecture is supported and designed by someone who is not you, thus you dont have to spend time designing and implementing anything from the above, but you can go straight to coding business rules.

• Has a community because it's a library (you can't have a community for HTTP or Websockets :P They're just standards/protocols)

Websockets

• You have the absolute control, depending on who you are, this can be very good or very bad
• It's as light as it gets (remember, its a protocol, not a library)
• You design your own architecture & protocol
• Has no autoconnect, you implement it yourself if yo want it
• Has no subscription service, you design it
• Has no logging, you implement it
• Has no fallback support
• Has no rooms, or namespaces. If you want such concepts, you implement them yourself
• Has no support for anything, you will be the one who implements everything
• You first have to focus on the technical parts and designing everything that comes and goes from and to your Websockets
• You have to debug your designs first, and this is going to take you a long time

Obviously, you can see I'm biased to SocketIO. I would love to say so, but I'm really really not.

I'm really fighting not to use SocketIO. I dont wanna use it. I like designing my own stuff and solving my own problems myself. But if you want to have a business and not just a 1000 lines project, and you're going to choose Websockets, you're going to have to implement every single thing yourself. You have to debug everything. You have to make your own subscription service. Your own protocol. Your own everything. And you have to make sure everything is quite sophisticated. And you'll make A LOT of mistakes along the way. You'll spend tons of time designing and debugging everything. I did and still do. I'm using websockets and the reason I'm here is because they're unbearable for a one guy trying to deal with solving business rules for his startup and instead dealing with Websocket designing jargon.

Choosing Websockets for a big application ain't an easy option if you're a one guy army or a small team. I've wrote more code in Websockets than I ever wrote with SocketIO in the past, and all I have to say is ... Choose SocketIO if you want a finished product and design. (unless you want something very simple in functionality)

The title attribute works on most HTML tags and is widely supported by modern browsers.

Explanation

It's quite simple, when explained in C#/Java terms:

1. A monad is a function that takes arguments and returns a special type.

2. The special type that this monad returns is also called monad. (A monad is a combination of #1 and #2)

3. There's some syntactic sugar to make calling this function and conversion of types easier.

Example

A monad is useful to make the life of the functional programmer easier. The typical example: The Maybe monad takes two parameters, a value and a function. It returns null if the passed value is null. Otherwise it evaluates the function. If we needed a special return type, we would call this return type Maybe as well. A very crude implementation would look like this:

object Maybe(object value, Func<object,object> function)
{
    if(value==null)
        return null;

    return function(value);
}

This is spectacularly useless in C# because this language lacks the required syntactic sugar to make monads useful. But monads allow you to write more concise code in functional programming languages.

Oftentimes programmers call monads in chains, like so:

var x = Maybe(x, x2 => Maybe(y, y2 => Add(x2, y2)));

In this example the Add method would only be called if x and y are both non-null, otherwise null will be returned.

Answer

To answer the original question: A monad is a function AND a type. Like an implementation of a special interface.

This is usually happens when the remote is down/unavailable; or the remote machine doesn't have ssh installed; or a firewall doesn't allow a connection to be established to the remote host.

ssh returns 255 when an error occurred or 255 is returned by the remote script:

 EXIT STATUS

     ssh exits with the exit status of the remote command or
     with 255 if an error occurred.

Usually you would an error message something similar to:

ssh: connect to host host.domain.com port 22: No route to host

Or

ssh: connect to host HOSTNAME port 22: Connection refused

Check-list:

• What happens if you run the ssh command directly from the command line?

• Are you able to ping that machine?

• Does the remote has ssh installed?

• If installed, then is the ssh service running?

The official tutorial discusses deploying an app to production. One option is to use Waitress, a production WSGI server. Other servers include Gunicorn and uWSGI.

When running publicly rather than in development, you should not use the built-in development server (flask run). The development server is provided by Werkzeug for convenience, but is not designed to be particularly efficient, stable, or secure.

Instead, use a production WSGI server. For example, to use Waitress, first install it in the virtual environment:

$ pip install waitress

You need to tell Waitress about your application, but it doesn’t use FLASK_APP like flask run does. You need to tell it to import and call the application factory to get an application object.

$ waitress-serve --call 'flaskr:create_app'
Serving on http://0.0.0.0:8080

Or you can use waitress.serve() in the code instead of using the CLI command.

from flask import Flask

app = Flask(__name__)

@app.route("/")
def index():
    return "<h1>Hello!</h1>"

if __name__ == "__main__":
    from waitress import serve
    serve(app, host="0.0.0.0", port=8080)

$ python hello.py

I had the same problem building VS 2013 Project with Visual Studio 2017 IDE. The solution was to set the right "Platformtoolset v120 (Visual Studio 2013). Therefor there must be the Windows SDK 8.1 installed. If you want to use Platformtoolset v141 (Visual Studio 2017) there must be Windows SDK 10. The Platformtoolset can be chosen inside the properties dialog of the project: General -> Platformtoolset

I had the same problem just now. If you brew info mysql and follow the steps it looks like the root password should be new-password if I remember correctly. I was seeing the same thing you are seeing. This article helped me the most.

It turned out I didn't have any accounts created for me. When I logged in after running mysqld_safe and did select * from user; no rows were returned. I opened the MySQLWorkbench with the mysqld_safe running and added a root account with all the privs I expected. This are working well for me now.

I did this to get rid of the overflow (scrollbar) ...

by the end of the jquery.fancybox....js file there are onStart, onCancel, onComplete etc. functions, and they are all empty ... so just go ahead and fill into the curly brackets of onStart with "$('body').css('overflow','hidden')" and onClosed "$('body').css('overflow','visible')" ... should look like this ...

onStart:function(){$('body').css('overflow','hidden')},
onClosed:function(){$('body').css('overflow','visible')},

peace

lapply(your_dataframe, class) gives you something like:

$tikr [1] "factor"

$Date [1] "Date"

$Open [1] "numeric"

$High [1] "numeric"

... etc.

Swift 4.2 and Xcode 10 Initialize label before viewDidLoad.

lazy var topLeftLabel: UILabel = {
    let label = UILabel()
    label.translatesAutoresizingMaskIntoConstraints = false
    label.text = "TopLeft"
    return label
}()

In viewDidLoad add label to the view and apply constraints.

override func viewDidLoad() {
    super.viewDidLoad()
    view.addSubview(topLeftLabel)
    topLeftLabel.leadingAnchor.constraint(equalTo: view.leadingAnchor, constant: 10).isActive = true
    topLeftLabel.topAnchor.constraint(equalTo: view.safeAreaLayoutGuide.topAnchor, constant: 10).isActive = true
}

Require the JSON library, and use to_json.

require 'json'
tempHash = {
    "key_a" => "val_a",
    "key_b" => "val_b"
}
File.open("public/temp.json","w") do |f|
  f.write(tempHash.to_json)
end

Your temp.json file now looks like:

{"key_a":"val_a","key_b":"val_b"}

In Java-8 you can use IntStream to produce a stream of numbers that you want to repeat, and then convert it to array. This approach produces an expression suitable for use in an initializer:

int[] data = IntStream.generate(() -> value).limit(size).toArray();

Above, size and value are expressions that produce the number of items that you want tot repeat and the value being repeated.

Demo.

This is how I usually get current logged in user and their id in my templates.

<p>Your Username is : {{user|default: Unknown}} </p>
<p>Your User Id is  : {{user.id|default: Unknown}} </p>

You can have great success and great performance either way. MSDN runs off of ASP.NET so you know it can perform well. PHP runs a lot of the top websites in the world. The same can be said of the databases as well. You really need to choose based upon your skills, the skills of your team, possible specific features that you need/want that one does better than the other, and even the servers that you want to run this site.

If I were building it, I would lean towards PHP because probably everything you want to do has been done before (with code examples how) and because hosting is so much easier to get (and cheaper because you don't have the licensing issues to deal with compared to Windows hosting). For the same reason, I would choose MySQL as well. It is a great database platform and the price is right.

I recommend just disabling this rule in Sonar, there is no real benefit of introducing a private constructor, just redundant characters in your codebase other people need to read and computer needs to store and process.

Using sed can also be elegant in this situation. Example (replace line with matched group "yyy" from line):

$ cat testfile
xxx yyy zzz
yyy xxx zzz
$ cat testfile | sed -r 's#^.*(yyy).*$#\1#g'
yyy
yyy

Relevant manual page: https://www.gnu.org/software/sed/manual/sed.html#Back_002dreferences-and-Subexpressions

It looks like you have everything correct according to Laravel docs, but you have a typo

$item->push($product);

Should be

$items->push($product);

I also want to think the actual method you're looking for is put

$items->put('products', $product);

substring(): It has 2 parameters "start" and "end".

• start parameter is required and specifies the position where to start the extraction.
• end parameter is optional and specifies the position where the extraction should end.

If the end parameter is not specified, all the characters from the start position till the end of the string are extracted.

var str = "Substring Example";_x000D_
var result = str.substring(0, 10);_x000D_
alert(result);_x000D_
_x000D_
Output : Substring

If the value of start parameter is greater than the value of the end parameter, this method will swap the two arguments. This means start will be used as end and end will be used as start.

var str = "Substring Example";_x000D_
var result = str.substring(10, 0);_x000D_
alert(result);_x000D_
_x000D_
Output : Substring

substr(): It has 2 parameters "start" and "count".

• start parameter is required and specifies the position where to start the extraction.

• count parameter is optional and specifies the number of characters to extract.

var str = "Substr Example";_x000D_
var result = str.substr(0, 10);_x000D_
alert(result);_x000D_
_x000D_
_x000D_
Output : Substr Exa

If the count parameter is not specified, all the characters from the start position till the end of the string are extracted. If count is 0 or negative, an empty string is returned.

var str = "Substr Example";_x000D_
var result = str.substr(11);_x000D_
alert(result);_x000D_
_x000D_
Output : ple

Very Easy, Had this same problem then what i did was to download and install an app that would help in displaying then fixed the error.

Download this app xming:

http://sourceforge.net/project/downloading.php?

Install, then use settings on this link:

http://www.geo.mtu.edu/geoschem/docs/putty_install.html or follow this steps:

Installing/Configuring PuTTy and Xming

Once PuTTy and Xming have been downloaded to the PC, install according to their respective instructions.

Configuring Xming

Once Xming is installed, run the application called 'XLaunch' and verify that the settings are as shown:

• select Default entries on Display Settings windows, click next
• click next on Session Type window.
• click next on Additional parameters window(Notice clipboard checkbox is true)
• save configuration and click to finish.

Configuring PuTTy

After installing PuTTy, double-click on the PuTTy icon on the desktop and configure as shown:

This shows creating a login profile then saving it.

• On ssh -> X11, click on checkbox to enable X11 forwarding.
• on X display location textbox, type localhost:0.0

save profile then connect remotely to server to test.

Cheers!!!

This is a sample code I used to counter the problem.

\begin{frame}{Topic 1}
Topic of the figures
\begin{figure}
\captionsetup[subfloat]{position=top,labelformat=empty}
\only<1>{\subfloat[Fig. 1]{\includegraphics{figure1.jpg}}}
\only<2>{\subfloat[Fig. 2]{\includegraphics{figure2.jpg}}}
\only<3>{\subfloat[Fig. 3]{\includegraphics{figure3.jpg}}}
\end{figure}
\end{frame}

Use Str() Function. It takes three arguments(the number, the number total characters to display, and the number of decimal places to display

  Select Str(12345.6789, 12, 3)

displays: ' 12345.679' ( 3 spaces, 5 digits 12345, a decimal point, and three decimal digits (679). - it rounds if it has to truncate, (unless the integer part is too large for the total size, in which case asterisks are displayed instead.)

for a Total of 12 characters, with 3 to the right of decimal point.

If you have a lot of duplicate code in your webpack.dev.config and your webpack.prod.config, you could use a boolean isProd to activate certain features only in certain situations and only have a single webpack.config.js file.

const isProd = (process.env.NODE_ENV === 'production');

 if (isProd) {
     plugins.push(new AotPlugin({
      "mainPath": "main.ts",
      "hostReplacementPaths": {
        "environments/index.ts": "environments/index.prod.ts"
      },
      "exclude": [],
      "tsConfigPath": "src/tsconfig.app.json"
    }));
    plugins.push(new UglifyJsPlugin({
      "mangle": {
        "screw_ie8": true
      },
      "compress": {
        "screw_ie8": true,
        "warnings": false
      },
      "sourceMap": false
    }));
  }

By the way: The DedupePlugin plugin was removed from Webpack. You should remove it from your configuration.

UPDATE:

In addition to my previous answer:

If you want to hide your code for release, try enclosejs.com. It allows you to:

• make a release version of your application without sources
• create a self-extracting archive or installer
• Make a closed source GUI application
• Put your assets inside the executable

You can install it with npm install -g enclose

You can put this in your .h file for your class and define it as property, in XCode 7:

@property int  (*stuffILike) [10];

You can use the code below if you dont want to use jQuery UI or any third party pluggin. It's only plain jQuery.

This answer works well with Bootstrap v3.x . For version 4.x see @User comment below

$(".modal").modal("show");_x000D_
_x000D_
$(".modal-header").on("mousedown", function(mousedownEvt) {_x000D_
    var $draggable = $(this);_x000D_
    var x = mousedownEvt.pageX - $draggable.offset().left,_x000D_
        y = mousedownEvt.pageY - $draggable.offset().top;_x000D_
    $("body").on("mousemove.draggable", function(mousemoveEvt) {_x000D_
        $draggable.closest(".modal-dialog").offset({_x000D_
            "left": mousemoveEvt.pageX - x,_x000D_
            "top": mousemoveEvt.pageY - y_x000D_
        });_x000D_
    });_x000D_
    $("body").one("mouseup", function() {_x000D_
        $("body").off("mousemove.draggable");_x000D_
    });_x000D_
    $draggable.closest(".modal").one("bs.modal.hide", function() {_x000D_
        $("body").off("mousemove.draggable");_x000D_
    });_x000D_
});

.modal-header {_x000D_
    cursor: move;_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>_x000D_
<link href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
_x000D_
<div class="modal fade" tabindex="-1" role="dialog">_x000D_
  <div class="modal-dialog" role="document">_x000D_
    <div class="modal-content">_x000D_
      <div class="modal-header">_x000D_
        <button type="button" class="close" data-dismiss="modal" aria-label="Close"><span aria-hidden="true">&times;</span></button>_x000D_
        <h4 class="modal-title">Modal title</h4>_x000D_
      </div>_x000D_
      <div class="modal-body">_x000D_
        <p>One fine body&hellip;</p>_x000D_
      </div>_x000D_
      <div class="modal-footer">_x000D_
        <button type="button" class="btn btn-default" data-dismiss="modal">Close</button>_x000D_
        <button type="button" class="btn btn-primary">Save changes</button>_x000D_
      </div>_x000D_
    </div><!-- /.modal-content -->_x000D_
  </div><!-- /.modal-dialog -->_x000D_
</div>

cat script.sh

    var1=$1
    var2=$2
    if [ "$#" -eq 2 ]
    then
            if [ -d $var1 ]
            then
            echo directory ${var1} exist
            else
            echo Directory ${var1} Does not exists
            fi
            if [ -d $var2 ]
            then
            echo directory ${var2} exist
            else
            echo Directory ${var2} Does not exists
            fi
    else
    echo "Arguments are not equals to 2"
    exit 1
    fi

execute it like below -

./script.sh directory1 directory2

Output will be like -

directory1 exit
directory2 Does not exists

Check the text contents of the connection manager file itself, the password field might be configured in the Project.params file, in which case entering the password into the connection manager window will cause it to not save.

Disclaimer: While the top answer is probably a better solution, as a beginner it's a lot to take in when all you want is something very simple. This is intended as a more direct answer to your original question "How can I select certain elements in React"

I think the confusion in your question is because you have React components which you are being passed the id "Progress1", "Progress2" etc. I believe this is not setting the html attribute 'id', but the React component property. e.g.

class ProgressBar extends React.Component {
    constructor(props) {
        super(props)
        this.state = {
            id: this.props.id    <--- ID set from <ProgressBar id="Progress1"/>
        }
    }        
}

As mentioned in some of the answers above you absolutely can use document.querySelector inside of your React app, but you have to be clear that it is selecting the html output of your components' render methods. So assuming your render output looks like this:

render () {
    const id = this.state.id
    return (<div id={"progress-bar-" + id}></div>)
}

Then you can elsewhere do a normal javascript querySelector call like this:

let element = document.querySelector('#progress-bar-Progress1')

And if you need to style your form elements according to it's state (modified/not modified) dynamically or to test whether some values has actually changed, you can use the following module, developed by myself: https://github.com/betsol/angular-input-modified

It adds additional properties and methods to the form and it's child elements. With it, you can test whether some element contains new data or even test if entire form has new unsaved data.

You can setup the following watch: $scope.$watch('myForm.modified', handler) and your handler will be called if some form elements actually contains new data or if it reversed to initial state.

Also, you can use modified property of individual form elements to actually reduce amount of data sent to a server via AJAX call. There is no need to send unchanged data.

As a bonus, you can revert your form to initial state via call to form's reset() method.

You can find the module's demo here: http://plnkr.co/edit/g2MDXv81OOBuGo6ORvdt?p=preview

Cheers!

You should take care with readLines(...) and big files. Reading all lines at memory can be risky. Below is a example of how to read file and process just one line at time:

processFile = function(filepath) {
  con = file(filepath, "r")
  while ( TRUE ) {
    line = readLines(con, n = 1)
    if ( length(line) == 0 ) {
      break
    }
    print(line)
  }

  close(con)
}

Understand the risk of reading a line at memory too. Big files without line breaks can fill your memory too.

Mike Stall posted the code for one he wrote in c# here :

http://blogs.msdn.com/jmstall/archive/2006/10/20/rtf_5F00_html.aspx

setting the content-type to undefined would make javascript pass the header data As it is , and over writing the default angular $httpProvider header configurations. Angular $http Documentation

$http({url:url,method:"POST", headers:{'Content-Type':undefined}).then(success,failure);

original answer

Yes.

window.screen.availHeight
window.screen.availWidth

update 2017-11-10

From Tsunamis in the comments:

To get the native resolution of i.e. a mobile device you have to multiply with the device pixel ratio: window.screen.width * window.devicePixelRatio and window.screen.height * window.devicePixelRatio. This will also work on desktops, which will have a ratio of 1.

And from Ben in another answer:

In vanilla JavaScript, this will give you the AVAILABLE width/height:

window.screen.availHeight
window.screen.availWidth

For the absolute width/height, use:

window.screen.height
window.screen.width

Just in case for those using Windows, you don't need sudo

npm i -g nodemon

I found out it was:

$ git fetch upstream
$ git merge upstream/master

You could also use analytical Rank Function

    with temp as 
(
select username, date, RANK() over (partition by username order by date desc) as rnk from t
)
select username, rnk from t where rnk = 1

From this excellent article on query locks in Postgres, one can get blocked query and blocker query and their information from the following query.

CREATE VIEW lock_monitor AS(
SELECT
  COALESCE(blockingl.relation::regclass::text,blockingl.locktype) as locked_item,
  now() - blockeda.query_start AS waiting_duration, blockeda.pid AS blocked_pid,
  blockeda.query as blocked_query, blockedl.mode as blocked_mode,
  blockinga.pid AS blocking_pid, blockinga.query as blocking_query,
  blockingl.mode as blocking_mode
FROM pg_catalog.pg_locks blockedl
JOIN pg_stat_activity blockeda ON blockedl.pid = blockeda.pid
JOIN pg_catalog.pg_locks blockingl ON(
  ( (blockingl.transactionid=blockedl.transactionid) OR
  (blockingl.relation=blockedl.relation AND blockingl.locktype=blockedl.locktype)
  ) AND blockedl.pid != blockingl.pid)
JOIN pg_stat_activity blockinga ON blockingl.pid = blockinga.pid
  AND blockinga.datid = blockeda.datid
WHERE NOT blockedl.granted
AND blockinga.datname = current_database()
);

SELECT * from lock_monitor;

As the query is long but useful, the article author has created a view for it to simplify it's usage.

Like @Sunkas wrote, performSelector:withObject:afterDelay: is the pendant to the dispatch_after just that it is shorter and you have the normal objective-c syntax. If you need to pass arguments to the block you want to delay, you can just pass them through the parameter withObject and you will receive it in the selector you call:

[self performSelector:@selector(testStringMethod:) 
           withObject:@"Test Test" 
           afterDelay:0.5];

- (void)testStringMethod:(NSString *)string{
    NSLog(@"string  >>> %@", string);
}

If you still want to choose yourself if you execute it on the main thread or on the current thread, there are specific methods which allow you to specify this. Apples Documentation tells this:

If you want the message to be dequeued when the run loop is in a mode other than the default mode, use the performSelector:withObject:afterDelay:inModes: method instead. If you are not sure whether the current thread is the main thread, you can use the performSelectorOnMainThread:withObject:waitUntilDone: or performSelectorOnMainThread:withObject:waitUntilDone:modes: method to guarantee that your selector executes on the main thread. To cancel a queued message, use the cancelPreviousPerformRequestsWithTarget: or cancelPreviousPerformRequestsWithTarget:selector:object: method.

Very well done and answered here - http://www.sitepoint.com/css3-transform-background-image/

#myelement:before
{
    content: "";
    position: absolute;
    width: 200%;
    height: 200%;
    top: -50%;
    left: -50%;
    z-index: -1;
    background: url(background.png) 0 0 repeat;
    -webkit-transform: rotate(30deg);
    -moz-transform: rotate(30deg);
    -ms-transform: rotate(30deg);
    -o-transform: rotate(30deg);
    transform: rotate(30deg);
}

I had this same issue.

The solution for me was found in the Microsoft KB Article 2452723:

Windows Vista onwards scheduled tasks fail to run if the path in "Start in (Optional)" field has quotes

Basically, edit your scheduled task and take the Quotes out of the Start In field:

1. Open your Scheduled Task
2. Switch to "Actions" tab
3. Open your Action
4. Remove Quotes (") from the field "Start in (optional)"
5. Save and close all open dialogs

To get the relevant error message:

1) Convert 2147942667 to hex: 8007010B
2) Take last 4 digits (010B) and convert to decimal: 267
3) Run: net helpmsg 267
4) Result: "The directory name is invalid."

input[type=text]
{
   height: 15px; 
   line-height: 15px;
}

this is correct way to set vertical-middle position.

You can do like this

var filter = {_x000D_
  address: 'England',_x000D_
  name: 'Mark'_x000D_
};_x000D_
var users = [{_x000D_
    name: 'John',_x000D_
    email: '[email protected]',_x000D_
    age: 25,_x000D_
    address: 'USA'_x000D_
  },_x000D_
  {_x000D_
    name: 'Tom',_x000D_
    email: '[email protected]',_x000D_
    age: 35,_x000D_
    address: 'England'_x000D_
  },_x000D_
  {_x000D_
    name: 'Mark',_x000D_
    email: '[email protected]',_x000D_
    age: 28,_x000D_
    address: 'England'_x000D_
  }_x000D_
];_x000D_
_x000D_
_x000D_
users= users.filter(function(item) {_x000D_
  for (var key in filter) {_x000D_
    if (item[key] === undefined || item[key] != filter[key])_x000D_
      return false;_x000D_
  }_x000D_
  return true;_x000D_
});_x000D_
_x000D_
console.log(users)

pthread_self() function will give the thread id of current thread.

pthread_t pthread_self(void);

The pthread_self() function returns the Pthread handle of the calling thread. The pthread_self() function does NOT return the integral thread of the calling thread. You must use pthread_getthreadid_np() to return an integral identifier for the thread.

NOTE:

pthread_id_np_t   tid;
tid = pthread_getthreadid_np();

is significantly faster than these calls, but provides the same behavior.

pthread_id_np_t   tid;
pthread_t         self;
self = pthread_self();
pthread_getunique_np(&self, &tid);

Try this:

$(".ct option[value='X']").each(function() {
    $(this).remove();
});

Or to be more terse, this will work just as well:

$(".ct option[value='X']").remove();

Declare your manifest header like this

<manifest xmlns:android="http://schemas.android.com/apk/res/android"
    package="com.yourpackage"
    xmlns:tools="http://schemas.android.com/tools">

Then you can add to your application tag the following attribute:

<application
    tools:replace="icon, label" ../>

For example I need to replace icon and label. Good luck!

Try this:

a = 1
b = 2
int_div  = a // b

The right way to iterate on a list inside list is:

//iterate on the general list
for(int i = 0 ; i < collection.size() ; i++) {
    ArrayList<String> currentList = collection.get(i);
    //now iterate on the current list
    for (int j = 0; j < currentList.size(); j++) {
        String s = currentList.get(1);
    }
}

moment(moment('2015/04/09 16:00:00').add(7, 'd').format('YYYY/MM/DD HH:mm:mm'))

has to format and then convert to moment again.

I made this function, based on eis's answer:

function array_map_($callback, $arr) {
    if (!is_callable($callback))
        return $arr;

    $result = array_walk($arr, function(&$value, $key) use ($callback) {
        $value = call_user_func($callback, $key, $value);
    });

    if (!$result)
        return false;

    return $arr;
}

Example:

$test_array = array("first_key" => "first_value", 
                "second_key" => "second_value");

var_dump(array_map_(function($key, $value){
    return $key . " loves " . $value;
}, $arr));

Output:

array (
  'first_key' => 'first_key loves first_value,
  'second_key' => 'second_key loves second_value',
)

Off course, you can use array_values to return exactly what OP wants.

array_values(array_map_(function($key, $value){
    return $key . " loves " . $value;
}, $test_array))

Your script is blocked from executing due to the execution policy.

You need to run PowerShell as administrator and set it on the client PC to Unrestricted. You can do that by calling Invoke with:

Set-ExecutionPolicy Unrestricted

Just remove css from your js fiddle,use the myvaue === true.

<div ng-show="myvalue == true" class="ng-cloak">Here I am</div>

After fetching a zillion times still added remotes didn't show up, although the blobs were in the pool. Turns out the --tags option shouldn't be given to git remote add for whatever reason. You can manually remove it from the .git/config to make git fetch create the refs.

Use

// aspect-type.js
class AspectType {

}

export default AspectType;

Then to import it

// some-other-file.js
import AspectType from './aspect-type';

Read http://babeljs.io/docs/learn-es2015/#modules for more details

To get parameters from URL with ngRoute . It means that you will need to include angular-route.js in your application as a dependency. More information how to do this on official ngRoute documentation.

The solution for the question:

// You need to add 'ngRoute' as a dependency in your app
angular.module('ngApp', ['ngRoute'])
    .config(function ($routeProvider, $locationProvider) {
        // configure the routing rules here
        $routeProvider.when('/backend/:type/:id', {
            controller: 'PagesCtrl'
        });

        // enable HTML5mode to disable hashbang urls
        $locationProvider.html5Mode(true);
    })
    .controller('PagesCtrl', function ($routeParams) {
        console.log($routeParams.id, $routeParams.type);
    });

If you don't enable the $locationProvider.html5Mode(true);. Urls will use hashbang(/#/).

More information about routing can be found on official angular $route API documentation.

Side note: This question is answering how to achieve this using ng-Route however I would recommend using the ui-Router for routing. It is more flexible, offers more functionality, the documentations is great and it is considered the best routing library for angular.

Have you tried "\n" I guess, it should work.

On an EC2 at AWS, I did this:

 yum list | grep imagick

Then found a list of ones I could install...

 php -v

told me which version of php I had and thus which version of imagick

yum install php56-pecl-imagick.x86_64

Did the trick. Enjoy!

Update your cordova to the latest version and the issue should be resolved. In case the issue not resolved please set the path in the environment variable (in case of Windows). Example: System Variable Value name GRADLE_HOME Value D:\Android\Android Studio\gradle\gradle-4.3.1 (please replace with your path)

Just assigning the value and committing them will work for all the data types but JSON and Pickled attributes. Since pickled type is explained above I'll note down a slightly different but easy way to update JSONs.

class User(db.Model):
    id = db.Column(db.Integer, primary_key=True)
    name = db.Column(db.String(80), unique=True)
    data = db.Column(db.JSON)

def __init__(self, name, data):
    self.name = name
    self.data = data

Let's say the model is like above.

user = User("Jon Dove", {"country":"Sri Lanka"})
db.session.add(user)
db.session.flush()
db.session.commit()

This will add the user into the MySQL database with data {"country":"Sri Lanka"}

Modifying data will be ignored. My code that didn't work is as follows.

user = User.query().filter(User.name=='Jon Dove')
data = user.data
data["province"] = "south"
user.data = data
db.session.merge(user)
db.session.flush()
db.session.commit()

Instead of going through the painful work of copying the JSON to a new dict (not assigning it to a new variable as above), which should have worked I found a simple way to do that. There is a way to flag the system that JSONs have changed.

Following is the working code.

from sqlalchemy.orm.attributes import flag_modified
user = User.query().filter(User.name=='Jon Dove')
data = user.data
data["province"] = "south"
user.data = data
flag_modified(user, "data")
db.session.merge(user)
db.session.flush()
db.session.commit()

This worked like a charm. There is another method proposed along with this method here Hope I've helped some one.

According to documentation: to verify host or peer certificate you need to specify alternate certificates with the CURLOPT_CAINFO option or a certificate directory can be specified with the CURLOPT_CAPATH option.

Also look at CURLOPT_SSL_VERIFYHOST:

• 1 to check the existence of a common name in the SSL peer certificate.
• 2 to check the existence of a common name and also verify that it matches the hostname provided.

curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 0);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, 0);