NetBeans IDE automatically defines the structure which is almost similar to one suggested by Patrick Garner. For NetBeans users

File->New Project ->In left side select Maven and In right side select Maven Enterprise Application and press Next -> Asks for project names for both war,ejb and settings.

The IDE will automatically create the structure for you.

According to John Day's answer

You should have a Data/Packages folder in your Sublime Text 2 install directory. All you need to do is download the plugin and put the plugin folder in the Packages folder.

In case if you are searching for Data/Packages folder you can find it here

Windows: %APPDATA%\Sublime Text 2

OS X: ~/Library/Application Support/Sublime Text 2

Linux: ~/.Sublime Text 2

Portable Installation: Sublime Text 2/Data

Follow this pattern if you browsing for image files:

dialog.Filter =  "Image files (*.jpg, *.jpeg, *.jpe, *.jfif, *.png) | *.jpg; *.jpeg; *.jpe; *.jfif; *.png";

You need to use a back_inserter:

std::copy(input.begin(), input.end(), std::back_inserter(output));

std::copy doesn't add elements to the container into which you are inserting: it can't; it only has an iterator into the container. Because of this, if you pass an output iterator directly to std::copy, you must make sure it points to a range that is at least large enough to hold the input range.

std::back_inserter creates an output iterator that calls push_back on a container for each element, so each element is inserted into the container. Alternatively, you could have created a sufficient number of elements in the std::vector to hold the range being copied:

std::vector<double> output(input.size());
std::copy(input.begin(), input.end(), output.begin());

Or, you could use the std::vector range constructor:

std::vector<double> output(input.begin(), input.end()); 

I bumped into the same problem, I used:

if "Mel" in a["Names"].values:
    print("Yep")

But this solution may be slower since internally pandas create a list from a Series.

Also you can use ss utility to dump sockets statistics.

To dump summary:

ss -s

Total: 91 (kernel 0)
TCP:   18 (estab 11, closed 0, orphaned 0, synrecv 0, timewait 0/0), ports 0

Transport Total     IP        IPv6
*         0         -         -        
RAW       0         0         0        
UDP       4         2         2        
TCP       18        16        2        
INET      22        18        4        
FRAG      0         0         0

To display all sockets:

ss -a

To display UDP sockets:

ss -u -a

To display TCP sockets:

ss -t -a

Here you can read ss man: ss

In Python 3.x and 2.7, you can simply do this:

>>> '${:,.2f}'.format(1234.5)
'$1,234.50'

The :, adds a comma as a thousands separator, and the .2f limits the string to two decimal places (or adds enough zeroes to get to 2 decimal places, as the case may be) at the end.

public class GetUsers extends AsyncTask {

    @Override
    protected void onPreExecute() {
        super.onPreExecute();

    }

    private String convertStreamToString(InputStream is) {
        BufferedReader reader = new BufferedReader(new InputStreamReader(is));
        StringBuilder sb = new StringBuilder();

        String line = null;
        try {
            while ((line = reader.readLine()) != null) {
                sb.append(line + "\n");
            }
        } catch (IOException e) {
            e.printStackTrace();
        } finally {
            try {
                is.close();
            } catch (IOException e) {
                e.printStackTrace();
            }
        }

        return sb.toString();
    }

    public String connect()
    {
        HttpClient httpclient = new DefaultHttpClient();

        // Prepare a request object
        HttpPost htopost = new HttpPost("URL");
        htopost.setHeader(new BasicHeader("Authorization","Basic Og=="));

        try {

            JSONObject param = new JSONObject();
            param.put("PageSize",100);
            param.put("Userid",userId);
            param.put("CurrentPage",1);

            htopost.setEntity(new StringEntity(param.toString()));

            // Execute the request
            HttpResponse response;

            response = httpclient.execute(htopost);
            // Examine the response status
            // Get hold of the response entity
            HttpEntity entity = response.getEntity();

            if (entity != null) {

                // A Simple JSON Response Read
                InputStream instream = entity.getContent();
                String result = convertStreamToString(instream);

                // A Simple JSONObject Creation
                json = new JSONArray(result);

                // Closing the input stream will trigger connection release
                instream.close();
                return ""+response.getStatusLine().getStatusCode();
            }
        } catch (Exception e) {
            e.printStackTrace();
        }

        return null;
    }

    @Override
    protected String doInBackground(String... urls) {
        return connect();
    }

    @Override
    protected void onPostExecute(String status){
        try {

            if(status.equals("200"))
            {

                    Global.defaultMoemntLsit.clear();

                    for (int i = 0; i < json.length(); i++) {
                        JSONObject ojb = json.getJSONObject(i);
                        UserMomentModel u = new UserMomentModel();
                        u.setId(ojb.getString("Name"));
                        u.setUserId(ojb.getString("ID"));


                        Global.defaultMoemntLsit.add(u);
                    }




                            userAdapter = new UserAdapter(getActivity(), Global.defaultMoemntLsit);
                            recycleView.setAdapter(userMomentAdapter);
                            recycleView.setLayoutManager(mLayoutManager);
           }



        }
        catch (Exception e)
        {
            e.printStackTrace();

        }
    }
}

From what I know, it's highly recommended NOT to use the Finalizer / Destructor:

public ~MyClass() {
  //dont use this
}

Mostly, this is due to not knowing when or IF it will be called. The dispose method is much better, especially if you us using or dispose directly.

using is good. use it :)

There isn't anything built-in, but you can easily create your own extension method to do it:

public static void ForEach<T>(this IEnumerable<T> source, Action<T> action)
{
    if (source == null) throw new ArgumentNullException("source");
    if (action == null) throw new ArgumentNullException("action");

    foreach (T item in source)
    {
        action(item);
    }
}

I believe you may need the Typescript typings for JQuery. Since you said you're using Visual Studio, you could use Nuget to get them.

https://www.nuget.org/packages/jquery.TypeScript.DefinitelyTyped/

The command in Nuget Package Manager Console is

Install-Package jquery.TypeScript.DefinitelyTyped

Update: As noted in the comment this package hasn't been updated since 2016. But you can still visit their Github page at https://github.com/DefinitelyTyped/DefinitelyTyped and download the types. Navigate the folder for your library and then download the index.d.ts file there. Pop it anywhere in your project directory and VS should use it right away.

The very main difference between PCDATA and CDATA is

PCDATA - Basically used for ELEMENTS while

CDATA - Used for Attributes of XML i.e ATTLIST

I meet the same problem,but ,at last I solve the problem by followed way

((ViewGroup)dialog.getWindow().getDecorView())
.getChildAt(0).startAnimation(AnimationUtils.loadAnimation(
context,android.R.anim.slide_in_left));

sudo ldconfig

ldconfig creates the necessary links and cache to the most recent shared libraries found in the directories specified on the command line, in the file /etc/ld.so.conf, and in the trusted directories (/lib and /usr/lib).

Generally package manager takes care of this while installing the new library, but not always (specially when you install library with cmake).

And if the output of this is empty

$ echo $LD_LIBRARY_PATH

Please set the default path

$ LD_LIBRARY_PATH=/usr/local/lib

Here's how to force the target inside a click handler:

$('a#link_id').click(function() {
    $(this).attr('target', '_blank');
});

The problems is that dropboxes don't work the same as listboxes, at least the way ASP.NET MVC2 design expects: A dropbox allows only zero or one values, as listboxes can have a multiple value selection. So, being strict with HTML, that value shouldn't be in the option list as "selected" flag, but in the input itself.

See the following example:

<select id="combo" name="combo" value="id2">
  <option value="id1">This is option 1</option>
  <option value="id2" selected="selected">This is option 2</option>
  <option value="id3">This is option 3</option>
</select>

<select id="listbox" name="listbox" multiple>
  <option value="id1">This is option 1</option>
  <option value="id2" selected="selected">This is option 2</option>
  <option value="id3">This is option 3</option>
</select>

The combo has the option selected, but also has its value attribute set. So, if you want ASP.NET MVC2 to render a dropbox and also have a specific value selected (i.e., default values, etc.), you should give it a value in the rendering, like this:

// in my view             
<%=Html.DropDownList("UserId", selectListItems /* (SelectList)ViewData["UserId"]*/, new { @Value = selectedUser.Id } /* Your selected value as an additional HTML attribute */)%>

it is very simple....

[in make file]

==== 1 ===================

OBJS = ....\

version.o <<== add to your obj lists

==== 2 ===================

DATE = $(shell date +'char szVersionStr[20] = "%Y-%m-%d %H:%M:%S";') <<== add

all:version $(ProgramID) <<== version add at first

version: <<== add

echo '$(DATE)' > version.c  <== add ( create version.c file)

[in program]

=====3 =============

extern char szVersionStr[20];

[ using ]

=== 4 ====

printf( "Version: %s\n", szVersionStr );

var wordCount =
    from word in words
    group word by word into g
    select new { g.Key, Count = g.Count() };    

This is taken from one of the examples in the linqpad

If the tables are innodb you can create it like this:

CREATE TABLE accounts(
    account_id INT NOT NULL AUTO_INCREMENT,
    customer_id INT( 4 ) NOT NULL ,
    account_type ENUM( 'savings', 'credit' ) NOT NULL,
    balance FLOAT( 9 ) NOT NULL,
    PRIMARY KEY ( account_id ), 
    FOREIGN KEY (customer_id) REFERENCES customers(customer_id) 
) ENGINE=INNODB;

You have to specify that the tables are innodb because myisam engine doesn't support foreign key. Look here for more info.

MySQL Search & Replace Tool

Very useful web-based tool written in PHP which makes it easy to search and replace text strings in a MySQL database.

Drop the problem database, then reboot mysql service (sudo service mysql restart, for example).

1. Final • Final is used to apply restrictions on class, method and variable. • Final class can't be inherited, final method can't be overridden and final variable value can't be changed. • Final variables are initialized at the time of creation except in case of blank final variable which is initialized in Constructor. • Final is a keyword.

2. Finally • Finally is used for exception handling along with try and catch. • It will be executed whether exception is handled or not. • This block is used to close the resources like database connection, I/O resources. • Finally is a block.

3. Finalize • Finalize is called by Garbage collection thread just before collecting eligible objects to perform clean up processing. • This is the last chance for object to perform any clean-up but since it’s not guaranteed that whether finalize () will be called, its bad practice to keep resource till finalize call. • Finalize is a method.

Here is a simple example which I use in a backup (.bat / batch) script on Windows 10, which allows me to have different options when making backups.

...

:choice
set /P c=Do you want to rsync the archives to someHost[Y/N]?
if /I "%c%" EQU "Y" goto :syncthefiles
if /I "%c%" EQU "N" goto :doonotsyncthefiles
goto :choice

:syncthefiles
echo rsync files to somewhere ...
bash -c "rsync -vaz /mnt/d/Archive/Backup/ user@host:/home/user/Backup/blabla/"
echo done

:doonotsyncthefiles
echo Backup Complete!

...

You can have as many as you need of these blocks.

Gearoid Murphy's solution works better for me since on my distro (Ubuntu 11.10), gcc-4.4 and gcc-4.6 are in the same directory, so --compiler-bindir is no help. The only caveat is I also had to install g++-4.4 and symlink it as well:

sudo ln -s /usr/bin/gcc-4.4 /usr/local/cuda/bin/gcc
sudo ln -s /usr/bin/g++-4.4 /usr/local/cuda/bin/g++

In the Controller , one could use the below syntax

public ViewResult EditEmployee() {
    return View();
}

public ActionResult EditEmployee() {
    return View();
}

In the above example , only the return type varies . one returns ViewResult whereas the other one returns ActionResult.

ActionResult is an abstract class . It can accept:

ViewResult , PartialViewResult, EmptyResult , RedirectResult , RedirectToRouteResult , JsonResult , JavaScriptResult , ContentResult, FileContentResult , FileStreamResult , FilePathResult etc.

The ViewResult is a subclass of ActionResult.

From the documentation:

The hint should be set on the TextInputLayout, rather than the EditText. If a hint is specified on the child EditText in XML, the TextInputLayout might still work correctly; TextInputLayout will use the EditText's hint as its floating label. However, future calls to modify the hint will not update TextInputLayout's hint. To avoid unintended behavior, call setHint(CharSequence) and getHint() on TextInputLayout, instead of on EditText.

So I set android:hint and app:hintTextColor on TextInputLayout, not on TextInputEditText and it worked.

https://jsfiddle.net/bm3Lfcod/1/

For those seeking for a solution that works within a flexible parent container with a children that is flexible in both dimensions. eg. navbar buttons.

//the parent (example of what it may be)
div {
  display:flex;
  width: 100%;
}

//The children
a {
  display: inline-block;
}

//text wrapper
span {
  display: table-caption;
}

As xanatos said, this is a misuse of ForEach.

If you are going to use linq to handle this, I would do it like this:

var departments = employees.SelectMany(x => x.Departments);
foreach (var item in departments)
{
    item.SomeProperty = null;
}
collection.AddRange(departments);

However, the Loop approach is more readable and therefore more maintainable.

UPDATE 2020 JULY

Preview version of chromium based WebView 2 is released by the Microsoft. Now you can embed new Chromium Edge browser into a .NET application.

UPDATE 2018 MAY

If you're targeting application to run on Windows 10, then now you can embed Edge browser into your .NET application by using Windows Community Toolkit.

WPF Example:

1. Install Windows Community Toolkit Nuget Package

   Install-Package Microsoft.Toolkit.Win32.UI.Controls
   

2. XAML Code

   <Window
       x:Class="WebViewTest.MainWindow"
       xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
       xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
       xmlns:WPF="clr-namespace:Microsoft.Toolkit.Win32.UI.Controls.WPF;assembly=Microsoft.Toolkit.Win32.UI.Controls"
       xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
       xmlns:local="clr-namespace:WebViewTest"
       xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
       Title="MainWindow"
       Width="800"
       Height="450"
       mc:Ignorable="d">
       <Grid>
           <WPF:WebView x:Name="wvc" />
       </Grid>
   </Window>
   

3. CS Code:

   public partial class MainWindow : Window
   {
     public MainWindow()
     {
       InitializeComponent();
   
       // You can also use the Source property here or in the WPF designer
       wvc.Navigate(new Uri("https://www.microsoft.com"));
     }
   }
   

WinForms Example:

public partial class Form1 : Form
{
  public Form1()
  {
    InitializeComponent();

    // You can also use the Source property here or in the designer
    webView1.Navigate(new Uri("https://www.microsoft.com"));
  }
}

Please refer to this link for more information.

This worked for me: conda install --force-reinstall pyqt qt
Based on this

A few points I find useful when applying this to my own plots:

• I prefer the consistency of using fig.suptitle(title) rather than plt.suptitle(title)
• When using fig.tight_layout() the title must be shifted with fig.subplots_adjust(top=0.88)
• See answer below about fontsizes

Example code taken from subplots demo in matplotlib docs and adjusted with a master title.

import matplotlib.pyplot as plt
import numpy as np

# Simple data to display in various forms
x = np.linspace(0, 2 * np.pi, 400)
y = np.sin(x ** 2)

fig, axarr = plt.subplots(2, 2)
fig.suptitle("This Main Title is Nicely Formatted", fontsize=16)

axarr[0, 0].plot(x, y)
axarr[0, 0].set_title('Axis [0,0] Subtitle')
axarr[0, 1].scatter(x, y)
axarr[0, 1].set_title('Axis [0,1] Subtitle')
axarr[1, 0].plot(x, y ** 2)
axarr[1, 0].set_title('Axis [1,0] Subtitle')
axarr[1, 1].scatter(x, y ** 2)
axarr[1, 1].set_title('Axis [1,1] Subtitle')

# # Fine-tune figure; hide x ticks for top plots and y ticks for right plots
plt.setp([a.get_xticklabels() for a in axarr[0, :]], visible=False)
plt.setp([a.get_yticklabels() for a in axarr[:, 1]], visible=False)

# Tight layout often produces nice results
# but requires the title to be spaced accordingly
fig.tight_layout()
fig.subplots_adjust(top=0.88)

plt.show()

I had same issue. After browsing and struggling with issue found the below solution

import { HttpModule } from '@angular/http';
import { HttpClientModule } from '@angular/common/http';

imports: [
  HttpModule,
  HttpClientModule
]

Import HttpModule and HttpClientModule in app.module.ts and add into the imports like mentioned above.

You need to add type assertion .(string). It is necessary because the map is of type map[string]interface{}:

host := arguments["<host>"].(string) + ":" + arguments["<port>"].(string)

Latest version of Docopt returns Opts object that has methods for conversion:

host, err := arguments.String("<host>")
port, err := arguments.String("<port>")
host_port := host + ":" + port

@NominSim There may be other character, so I should detect it by length.

private String forceUtf8Coding(String str) {
    str = str.replace("\\","");
    String[] arr = str.split("u");
    StringBuilder text = new StringBuilder();
    for(int i = 1; i < arr.length; i++){
        String a = arr[i];
        String b = "";
        if (arr[i].length() > 4){
            a = arr[i].substring(0, 4);
            b = arr[i].substring(4);
        }
        int hexVal = Integer.parseInt(a, 16);
        text.append((char) hexVal).append(b);
    }
    return text.toString();
}

Does replacing a character in a String with a null character even work in Java?

No.

Would this be the culprit to the funky characters?

Quite likely.

Watch out! checking the radiobutton with setChecked() is not changing the state inside the RadioGroup. For example this method from the radioGroup will return a wrong result: getCheckedRadioButtonId().

Check the radioGroup always with

mOption.check(R.id.option1);

you've been warned ;)

A combination of basename and cut works fine, even in case of double ending like .tar.gz:

fbname=$(basename "$fullfile" | cut -d. -f1)

Would be interesting if this solution needs less arithmetic power than Bash Parameter Expansion.

Use the following: Long.valueOf(int);.

You cannot open and read a directory, use the isFile() and isDirectory() methods to distinguish between files and folders. You can get the contents of folders using the list() and listFiles() methods (for filenames and Files respectively) you can also specify a filter that selects a subset of files listed.

Update 2019: Using asdf

These days I suggest using asdf to install various versions of Python interpreters next to each other.

Note1: asdf works not only for Python but for all major languages.

Note2: asdf works fine in combination with popular package-managers such as pipenv and poetry.

If you have asdf installed you can easily download/install new Python interpreters:

# Install Python plugin for asdf:
asdf plugin-add python

# List all available Python interpreters:
asdf list-all python

# Install the Python interpreters that you need:
asdf install python 3.7.4
asdf install python 3.6.9
# etc...

# If you want to define the global version:
asdf global python 3.7.4

# If you want to define the local (project) version:
# (this creates a file .tool-versions in the current directory.)
asdf local python 3.7.4

Old Answer: Install Python from source

If you need to install multiple versions of Python (next to the main one) on Ubuntu / Mint: (should work similar on other Unixs'.)

1) Install Required Packages for source compilation

$ sudo apt-get install build-essential checkinstall
$ sudo apt-get install libreadline-gplv2-dev libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev

2) Download and extract desired Python version

Download Python Source for Linux as tarball and move it to /usr/src.

Extract the downloaded package in place. (replace the 'x's with your downloaded version)

$ sudo tar xzf Python-x.x.x.tgz

3) Compile and Install Python Source

$ cd Python-x.x.x
$ sudo ./configure
$ sudo make altinstall

Your new Python bin is now located in /usr/local/bin. You can test the new version:

$ pythonX.X -V
Python x.x.x
$ which pythonX.X
/usr/local/bin/pythonX.X

# Pip is now available for this version as well:
$ pipX.X -V
pip X.X.X from /usr/local/lib/pythonX.X/site-packages (python X.X)

You can do it with PHP:

header("Refresh:0");

It refreshes your current page, and if you need to redirect it to another page, use following:

header("Refresh:0; url=page2.php");

Simple solution if you need to ignore everything except few files and few root folders:

/*
!.gitignore
!showMe.txt
!my_visible_dir

The magic is in /* (as described above) it ignores everything in the (root) folder BUT NOT recursively.

In your example, I think that calling GC.Collect isn't the issue, but rather there is a design issue.

If you are going to wake up at intervals, (set times) then your program should be crafted for a single execution (perform the task once) and then terminate. Then, you set the program up as a scheduled task to run at the scheduled intervals.

This way, you don't have to concern yourself with calling GC.Collect, (which you should rarely if ever, have to do).

That being said, Rico Mariani has a great blog post on this subject, which can be found here:

http://blogs.msdn.com/ricom/archive/2004/11/29/271829.aspx

I'm afraid your understanding is completely backwards. :)

Think of "standard in", "standard out", and "standard error" from the program's perspective, not from the kernel's perspective.

When a program needs to print output, it normally prints to "standard out". A program typically prints output to standard out with printf, which prints ONLY to standard out.

When a program needs to print error information (not necessarily exceptions, those are a programming-language construct, imposed at a much higher level), it normally prints to "standard error". It normally does so with fprintf, which accepts a file stream to use when printing. The file stream could be any file opened for writing: standard out, standard error, or any other file that has been opened with fopen or fdopen.

"standard in" is used when the file needs to read input, using fread or fgets, or getchar.

Any of these files can be easily redirected from the shell, like this:

cat /etc/passwd > /tmp/out     # redirect cat's standard out to /tmp/foo
cat /nonexistant 2> /tmp/err   # redirect cat's standard error to /tmp/error
cat < /etc/passwd              # redirect cat's standard input to /etc/passwd

Or, the whole enchilada:

cat < /etc/passwd > /tmp/out 2> /tmp/err

There are two important caveats: First, "standard in", "standard out", and "standard error" are just a convention. They are a very strong convention, but it's all just an agreement that it is very nice to be able to run programs like this: grep echo /etc/services | awk '{print $2;}' | sort and have the standard outputs of each program hooked into the standard input of the next program in the pipeline.

Second, I've given the standard ISO C functions for working with file streams (FILE * objects) -- at the kernel level, it is all file descriptors (int references to the file table) and much lower-level operations like read and write, which do not do the happy buffering of the ISO C functions. I figured to keep it simple and use the easier functions, but I thought all the same you should know the alternatives. :)

Dont know if this is good to anyone, but search all these dlls:

• Microsoft.ReportViewer.Common.dll
• Microsoft.ReportViewer.ProcessingObjectModel.dll
• Microsoft.ReportViewer.WebForms.dll
• Microsoft.ReportViewer.WinForms.dll
• Microsoft.ReportViewer.DataVisualization.dll

You find them in C:\Windows\assembly\GAC_MSIL\..., and then put them in the references of your project.

For each of them say: local copy, and check for 32 or 64 bit solution.

Probably You can not, Long is higher datatype than Integer.

or this link might help you

http://www.velocityreviews.com/forums/t142373-convert-date-to-integer-and-back.html

A REGEXP_LIKE will do a case-insensitive regexp search.

select * from Users where Regexp_Like (User_Name, 'karl|anders|leif','i')

This will be executed as a full table scan - just as the LIKE or solution, so the performance will be really bad if the table is not small. If it's not used often at all, it might be ok.

If you need some kind of performance, you will need Oracle Text (or some external indexer).

To get substring indexing with Oracle Text you will need a CONTEXT index. It's a bit involved as it's made for indexing large documents and text using a lot of smarts. If you have particular needs, such as substring searches in numbers and all words (including "the" "an" "a", spaces, etc) , you need to create custom lexers to remove some of the smart stuff...

If you insert a lot of data, Oracle Text will not make things faster, especially if you need the index to be updated within the transactions and not periodically.

 <asp:GridView ID="GridView1" runat="server" PageSize="2" AutoGenerateColumns="false"
            AllowPaging="true" BackColor="White" BorderColor="#CC9966" BorderStyle="None"
            BorderWidth="1px" CellPadding="4" OnRowEditing="GridView1_RowEditing" OnRowUpdating="GridView1_RowUpdating"
            OnPageIndexChanging="GridView1_PageIndexChanging" OnRowCancelingEdit="GridView1_RowCancelingEdit"
            OnRowDeleting="GridView1_RowDeleting">
            <FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
            <RowStyle BackColor="White" ForeColor="#330099" />
            <SelectedRowStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
            <PagerStyle BackColor="#FFFFCC" ForeColor="#330099" HorizontalAlign="Center" />
            <HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
            <Columns>
            <asp:TemplateField HeaderText="SerialNo">
            <ItemTemplate>
            <%# Container .DataItemIndex+1 %>.&nbsp
            </ItemTemplate>
            </asp:TemplateField>
                <asp:TemplateField HeaderText="RollNo">
                    <ItemTemplate>
                        <%--<asp:Label ID="lblrollno" runat="server" Text='<%#Eval ("RollNo")%>'></asp:Label>--%>
                        <asp:TextBox ID="txtrollno" runat="server" Text='<%#Eval ("RollNo")%>'></asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="SName">
                    <ItemTemplate>
                    <%--<asp:Label ID="lblsname" runat="server" Text='<%#Eval("SName")%>'></asp:Label>--%>
                        <asp:TextBox ID="txtsname" runat="server" Text='<%#Eval("SName")%>'> </asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="C">
                    <ItemTemplate>
                    <%-- <asp:Label ID="lblc" runat="server" Text='<%#Eval ("C") %>'></asp:Label>--%>
                        <asp:TextBox ID="txtc" runat="server" Text='<%#Eval ("C") %>'></asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="Cpp">
                    <ItemTemplate>
                    <%-- <asp:Label ID="lblcpp" runat="server" Text='<%#Eval ("Cpp")%>'></asp:Label>--%>
                       <asp:TextBox ID="txtcpp" runat="server" Text='<%#Eval ("Cpp")%>'> </asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="Java">
                    <ItemTemplate>
                       <%--  <asp:Label ID="lbljava" runat="server" Text='<%#Eval ("Java")%>'> </asp:Label>--%>
                        <asp:TextBox ID="txtjava" runat="server" Text='<%#Eval ("Java")%>'> </asp:TextBox>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:TemplateField HeaderText="Edit" ShowHeader="False">
                    <EditItemTemplate>
                        <asp:LinkButton ID="lnkbtnUpdate" runat="server" CausesValidation="true" Text="Update"
                            CommandName="Update"></asp:LinkButton>
                        <asp:LinkButton ID="lnkbtnCancel" runat="server" CausesValidation="false" Text="Cancel"
                            CommandName="Cancel"></asp:LinkButton>
                    </EditItemTemplate>
                    <ItemTemplate>
                        <asp:LinkButton ID="btnEdit" runat="server" CausesValidation="false" CommandName="Edit"
                            Text="Edit"></asp:LinkButton>
                    </ItemTemplate>
                </asp:TemplateField>
                <asp:CommandField HeaderText="Delete" ShowDeleteButton="True" ShowHeader="True" />
                <asp:CommandField HeaderText="Select" ShowSelectButton="True" ShowHeader="True" />
            </Columns>
        </asp:GridView>
        <table>
            <tr>
                <td>
                    <asp:Label ID="lblrollno" runat="server" Text="RollNo"></asp:Label>
                    <asp:TextBox ID="txtrollno" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lblsname" runat="server" Text="SName"></asp:Label>
                    <asp:TextBox ID="txtsname" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lblc" runat="server" Text="C"></asp:Label>
                    <asp:TextBox ID="txtc" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lblcpp" runat="server" Text="Cpp"></asp:Label>
                    <asp:TextBox ID="txtcpp" runat="server"></asp:TextBox>
                </td>
                <td>
                    <asp:Label ID="lbljava" runat="server" Text="Java"></asp:Label>
                    <asp:TextBox ID="txtjava" runat="server"></asp:TextBox>
                </td>
            </tr>
            <tr>
                <td>
                    <asp:Button ID="Submit" runat="server" Text="Submit" OnClick="Submit_Click" />
                    <asp:Button ID="Reset" runat="server" Text="Reset" OnClick="Reset_Click" />
                </td>
            </tr>
        </table>

Also pdfjoin a.pdf b.pdf will create a new b-joined.pdf with the contents of a.pdf and b.pdf

A submodule is nothing but a clone of a git repo within another repo with some extra meta data (gitlink tree entry, .gitmodules file )

$ cd your_submodule
$ git checkout master
<hack,edit>
$ git commit -a -m "commit in submodule"
$ git push
$ cd ..
$ git add your_submodule
$ git commit -m "Updated submodule"

In case of continuous numbers randint or randrange are probably the best choices but if you have several distinct values in a sequence (i.e. a list) you could also use choice:

>>> import random
>>> values = list(range(10))
>>> random.choice(values)
5

choice also works for one item from a not-continuous sample:

>>> values = [1, 2, 3, 5, 7, 10]
>>> random.choice(values)
7

If you need it "cryptographically strong" there's also a secrets.choice in python 3.6 and newer:

>>> import secrets
>>> values = list(range(10))
>>> secrets.choice(values)
2

It should be "datepicker", not "datePicker" if you are using the jQuery UI DatePicker plugin. Perhaps, you have a different but similar plugin that doesn't support the select handler.

Personally, I couldn't use try/except KeyboardInterrupt because I was using standard socket (IPC) mode which is blocking. So the SIGINT was cueued, but came only after receiving data on the socket.

Setting a signal handler behaves the same.

On the other hand, this only works for an actual terminal. Other starting environments might not accept Ctrl+C, or pre-handle the signal.

Also, there are "Exceptions" and "BaseExceptions" in Python, which differ in the sense that interpreter needs to exit cleanly itself, so some exceptions have a higher priority than others (Exceptions is derived from BaseException)

To use a ternary operator without else inside of an array or object declaration, you can use the ES6 spread operator, ...():

const cond = false;
const arr = [
  ...(cond ? ['a'] : []),
  'b',
];
    // ['b']

And for objects:

const cond = false;
const obj = {
  ...(cond ? {a: 1} : {}),
  b: 2,
};
    // {b: 2}

Original source

     List<int> ListInt = new List<int> { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };


                int count = ListInt.Count;
                int index = 1;
                foreach (var item in ListInt)
                {
                    if (index != count)
                    {
                        Console.WriteLine("do something at index number  " + index);
                    }
                    else
                    {
                        Console.WriteLine("Foreach loop, this is the last iteration of the loop " + index);
                    }
                    index++;

                }
 //OR
                int count = ListInt.Count;
                int index = 1;
                foreach (var item in ListInt)
                {
                    if (index < count)
                    {
                        Console.WriteLine("do something at index number  " + index);
                    }
                    else
                    {
                        Console.WriteLine("Foreach loop, this is the last iteration of the loop " + index);
                    }
                    index++;

                }

Every Ansible task when run can save its results into a variable. To do this, you have to specify which variable to save the results into. Do this with the register parameter, independently of the module used.

Once you save the results to a variable you can use it later in any of the subsequent tasks. So for example if you want to get the standard output of a specific task you can write the following:

---
- hosts: localhost
  tasks:
    - shell: ls
      register: shell_result

    - debug:
        var: shell_result.stdout_lines

Here register tells ansible to save the response of the module into the shell_result variable, and then we use the debug module to print the variable out.

An example run would look like the this:

PLAY [localhost] ***************************************************************

TASK [command] *****************************************************************
changed: [localhost]

TASK [debug] *******************************************************************
ok: [localhost] => {
    "shell_result.stdout_lines": [
        "play.yml"
    ]
}

Responses can contain multiple fields. stdout_lines is one of the default fields you can expect from a module's response.

Not all fields are available from all modules, for example for a module which doesn't return anything to the standard out you wouldn't expect anything in the stdout or stdout_lines values, however the msg field might be filled in this case. Also there are some modules where you might find something in a non-standard variable, for these you can try to consult the module's documentation for these non-standard return values.

Alternatively you can increase the verbosity level of ansible-playbook. You can choose between different verbosity levels: -v, -vvv and -vvvv. For example when running the playbook with verbosity (-vvv) you get this:

PLAY [localhost] ***************************************************************

TASK [command] *****************************************************************
(...)
changed: [localhost] => {
    "changed": true,
    "cmd": "ls",
    "delta": "0:00:00.007621",
    "end": "2017-02-17 23:04:41.912570",
    "invocation": {
        "module_args": {
            "_raw_params": "ls",
            "_uses_shell": true,
            "chdir": null,
            "creates": null,
            "executable": null,
            "removes": null,
            "warn": true
        },
        "module_name": "command"
    },
    "rc": 0,
    "start": "2017-02-17 23:04:41.904949",
    "stderr": "",
    "stdout": "play.retry\nplay.yml",
    "stdout_lines": [
        "play.retry",
        "play.yml"
    ],
    "warnings": []
}

As you can see this will print out the response of each of the modules, and all of the fields available. You can see that the stdout_lines is available, and its contents are what we expect.

To answer your main question about the jenkins_script module, if you check its documentation, you can see that it returns the output in the output field, so you might want to try the following:

tasks:
  - jenkins_script:
      script: (...)
    register: jenkins_result

  - debug:
      var: jenkins_result.output

Use lapply function after creating your function normally.

lapply(x="your input", fun="insert your function name")

lapply gives a list so use unlist function to take them out of the function

unlist(lapply(a,w))

Haven't tested it, but that should alert the blobs data url:

var blob = event.clipboardData.items[0].getAsFile(), 
    form = new FormData(),
    request = new XMLHttpRequest();

var reader = new FileReader();
reader.onload = function(event) {
  alert(event.target.result); // <-- data url
};
reader.readAsDataURL(blob);

First create a class like:

public class Encryption
    { 
        public static string Encrypt(string clearText)
        {
            string EncryptionKey = "MAKV2SPBNI99212";
            byte[] clearBytes = Encoding.Unicode.GetBytes(clearText);
            using (Aes encryptor = Aes.Create())
            {
                Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
                encryptor.Key = pdb.GetBytes(32);
                encryptor.IV = pdb.GetBytes(16);
                using (MemoryStream ms = new MemoryStream())
                {
                    using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateEncryptor(), CryptoStreamMode.Write))
                    {
                        cs.Write(clearBytes, 0, clearBytes.Length);
                        cs.Close();
                    }
                    clearText = Convert.ToBase64String(ms.ToArray());
                }
            }
            return clearText;
        }

        public static string Decrypt(string cipherText)
        {
            string EncryptionKey = "MAKV2SPBNI99212";
            byte[] cipherBytes = Convert.FromBase64String(cipherText);
            using (Aes encryptor = Aes.Create())
            {
                Rfc2898DeriveBytes pdb = new Rfc2898DeriveBytes(EncryptionKey, new byte[] { 0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76 });
                encryptor.Key = pdb.GetBytes(32);
                encryptor.IV = pdb.GetBytes(16);
                using (MemoryStream ms = new MemoryStream())
                {
                    using (CryptoStream cs = new CryptoStream(ms, encryptor.CreateDecryptor(), CryptoStreamMode.Write))
                    {
                        cs.Write(cipherBytes, 0, cipherBytes.Length);
                        cs.Close();
                    }
                    cipherText = Encoding.Unicode.GetString(ms.ToArray());
                }
            }
            return cipherText;
        }
    }

**In Controller **

add reference for this encryption class:

using testdemo.Models

public ActionResult Index() {
            return View();
        }
        [HttpPost]
        public ActionResult Index(string text)
        {
            if (Request["txtEncrypt"] != null)
            {
                string getEncryptionCode = Request["txtEncrypt"];
                string DecryptCode = Encryption.Decrypt(HttpUtility.UrlDecode(getEncryptionCode));
                ViewBag.GetDecryptCode = DecryptCode;
                return View();
            }
            else {
                string getDecryptCode = Request["txtDecrypt"];
                string EncryptionCode = HttpUtility.UrlEncode(Encryption.Encrypt(getDecryptCode));
                ViewBag.GetEncryptionCode = EncryptionCode;
                return View();
            }

        }

In View

<h2>Decryption Code</h2>
@using (Html.BeginForm())
{
    <table class="table-bordered table">
        <tr>
            <th>Encryption Code</th>
            <td><input type="text" id="txtEncrypt" name="txtEncrypt" placeholder="Enter Encryption Code" /></td>
        </tr>
        <tr>
            <td colspan="2">
                <span style="color:red">@ViewBag.GetDecryptCode</span>
            </td>
        </tr>
        <tr>
                <td colspan="2">
                    <input type="submit" id="btnEncrypt" name="btnEncrypt"value="Decrypt to Encrypt code" />
                </td>
            </tr>
    </table>
}
    <br />
    <br />
    <br />
    <h2>Encryption Code</h2>
@using (Html.BeginForm())
{
    <table class="table-bordered table">
        <tr>
            <th>Decryption Code</th>
            <td><input type="text" id="txtDecrypt" name="txtDecrypt" placeholder="Enter Decryption Code" /></td>
        </tr>

        <tr>
            <td colspan="2">
                <span style="color:red">@ViewBag.GetEncryptionCode</span>
            </td>
        </tr>
        <tr>
            <td colspan="2">
                <input type="submit" id="btnDecryt" name="btnDecryt" value="Encrypt to Decrypt code" />
            </td>
        </tr>
    </table>
}

Add it in database migrations, that way everyone gets it as they update. Handle all of your logic in the ruby/rails code, so you never have to mess with explicit ID settings.

This code is perfectly working for me.

  UILabel *label = [[UILabel alloc]initWithFrame:CGRectMake(15,23, 350,22)];
  [label setFont:[UIFont systemFontOfSize:11]];

You can define a Error.prototype.toJSON to retrieve a plain Object representing the Error:

if (!('toJSON' in Error.prototype))
Object.defineProperty(Error.prototype, 'toJSON', {
    value: function () {
        var alt = {};

        Object.getOwnPropertyNames(this).forEach(function (key) {
            alt[key] = this[key];
        }, this);

        return alt;
    },
    configurable: true,
    writable: true
});

var error = new Error('testing');
error.detail = 'foo bar';

console.log(JSON.stringify(error));
// {"message":"testing","detail":"foo bar"}

Using Object.defineProperty() adds toJSON without it being an enumerable property itself.

Regarding modifying Error.prototype, while toJSON() may not be defined for Errors specifically, the method is still standardized for objects in general (ref: step 3). So, the risk of collisions or conflicts is minimal.

Though, to still avoid it completely, JSON.stringify()'s replacer parameter can be used instead:

function replaceErrors(key, value) {
    if (value instanceof Error) {
        var error = {};

        Object.getOwnPropertyNames(value).forEach(function (key) {
            error[key] = value[key];
        });

        return error;
    }

    return value;
}

var error = new Error('testing');
error.detail = 'foo bar';

console.log(JSON.stringify(error, replaceErrors));

xmltodict (full disclosure: I wrote it) does exactly that:

xmltodict.parse("""
<?xml version="1.0" ?>
<person>
  <name>john</name>
  <age>20</age>
</person>""")
# {u'person': {u'age': u'20', u'name': u'john'}}

Try the element:

$(td).find('a').attr('disabled', 'disabled');

Disabling a link works for me in Chrome: http://jsfiddle.net/KeesCBakker/LGYpz/.

Firefox doesn't seem to play nice. This example works:

<a id="a1" href="http://www.google.com">Google 1</a>
<a id="a2" href="http://www.google.com">Google 2</a>

$('#a1').attr('disabled', 'disabled');

$(document).on('click', 'a', function(e) {
    if ($(this).attr('disabled') == 'disabled') {
        e.preventDefault();
    }
});

Note: added a 'live' statement for future disabled / enabled links.
Note2: changed 'live' into 'on'.

I used the html tag to change a single item's text colour when the menu item is inflated. Hope it would be helpful.

public boolean onCreateOptionsMenu(Menu menu) {
    // Inflate the menu; this adds items to the action bar if it is present.
    getMenuInflater().inflate(R.menu.menu_main, menu);
    menu.findItem(R.id.main_settings).setTitle(Html.fromHtml("<font color='#ff3824'>Settings</font>"));
    return true;
}

In the meantime (while you were updating your project), other commits have been made to the 'master' branch. Therefore, you must pull those changes first to be able to push your changes.

If this is the code you have, then you will get an error because, you are reassigning $row while in the loop, so you would never be able to iterate over the results. Replace

$rows = $rows['Name'];

with

$name = $rows['Name']'

So your code would look like

WHILE ($rows = mysql_fetch_array($query)):

   $name = $rows['Name'];
   $address = $rows['Address'];
   $email = $rows['Email'];
   $subject = $rows['Subject'];
   $comment = $rows['Comment'];

Also I am assuming that the column names in the table users are Name, Address, Email etc. and not name,address, email. Remember that every variable name/field nameh is case sensitive.

You can't actually do the job quite right with toLowerCase, either on a string or in a character. The problem is that there are variant glyphs in either upper or lower case, and depending on whether you uppercase or lowercase your glyphs may or may not be preserved. It's not even clear what you mean when you say that two variants of a lower-case glyph are compared ignoring case: are they or are they not the same? (Note that there are also mixed-case glyphs: \u01c5, \u01c8, \u01cb, \u01f2 or ?, ?, ?, ?, but any method suggested here will work on those as long as they should count as the same as their fully upper or full lower case variants.)

There is an additional problem with using Char: there are some 80 code points not representable with a single Char that are upper/lower case variants (40 of each), at least as detected by Java's code point upper/lower casing. You therefore need to get the code points and change the case on these.

But code points don't help with the variant glyphs.

Anyway, here's a complete list of the glyphs that are problematic due to variants, showing how they fare against 6 variant methods:

1. Character toLowerCase
2. Character toUpperCase
3. String toLowerCase
4. String toUpperCase
5. String equalsIgnoreCase
6. Character toLowerCase(toUpperCase) (or vice versa)

For these methods, S means that the variants are treated the same as each other, D means the variants are treated as different from each other.

Behavior     Unicode                             Glyphs
===========  ==================================  =========
1 2 3 4 5 6  Upper  Lower  Var Up Var Lo Vr Lo2  U L u l l2
- - - - - -  ------ ------ ------ ------ ------  - - - - -
D D D D S S  \u0049 \u0069 \u0130 \u0131         I i I i   
S D S D S S  \u004b \u006b \u212a                K k K     
D S D S S S  \u0053 \u0073        \u017f         S s   ?   
D S D S S S  \u039c \u03bc        \u00b5         ? µ   µ   
S D S D S S  \u00c5 \u00e5 \u212b                Å å Å     
D S D S S S  \u0399 \u03b9        \u0345 \u1fbe  ? ?   ? ? 
D S D S S S  \u0392 \u03b2        \u03d0         ? ß   ?   
D S D S S S  \u0395 \u03b5        \u03f5         ? e   ?   
D D D D S S  \u0398 \u03b8 \u03f4 \u03d1         T ? ? ?   
D S D S S S  \u039a \u03ba        \u03f0         ? ?   ?   
D S D S S S  \u03a0 \u03c0        \u03d6         ? p   ?   
D S D S S S  \u03a1 \u03c1        \u03f1         ? ?   ?   
D S D S S S  \u03a3 \u03c3        \u03c2         S s   ?   
D S D S S S  \u03a6 \u03c6        \u03d5         F f   ?   
S D S D S S  \u03a9 \u03c9 \u2126                O ? ?     
D S D S S S  \u1e60 \u1e61        \u1e9b         ? ?   ?   

Complicating this still further is that there is no way to get the Turkish I's right (i.e. the dotted versions are different than the undotted versions) unless you know you're in Turkish; none of these methods give correct behavior and cannot unless you know the locale (i.e. non-Turkish: i and I are the same ignoring case; Turkish, not).

Overall, using toUpperCase gives you the closest approximation, since you have only five uppercase variants (or four, not counting Turkish).

You can also try to specifically intercept those five troublesome cases and call toUpperCase(toLowerCase(c)) on them alone. If you choose your guards carefully (just toUpperCase if c < 0x130 || c > 0x212B, then work through the other alternatives) you can get only a ~20% speed penalty for characters in the low range (as compared to ~4x if you convert single characters to strings and equalsIgnoreCase them) and only about a 2x penalty if you have a lot in the danger zone. You still have the locale problem with dotted I, but otherwise you're in decent shape. Of course if you can use equalsIgnoreCase on a larger string, you're better off doing that.

Here is sample Scala code that does the job:

def elevateCase(c: Char): Char = {
  if (c < 0x130 || c > 0x212B) Character.toUpperCase(c)
  else if (c == 0x130 || c == 0x3F4 || c == 0x2126 || c >= 0x212A)
    Character.toUpperCase(Character.toLowerCase(c))
  else Character.toUpperCase(c)
}

For copy any text in Android:

            TextView text = findViewById(R.id.text_id);
            ImageView icons = findViewById(R.id.copy_icon);

            icons.setOnClickListener(new View.OnClickListener() {
                @Override
                public void onClick(View v) {
                    ClipboardManager clipboardManager = (ClipboardManager)getSystemService(Context.CLIPBOARD_SERVICE);
                    ClipData clipData = ClipData.newPlainText("text whatever you want", text.getText().toString());
                    clipboardManager.setPrimaryClip(clipData);

                    Toast.makeText(context, "Text Copied", Toast.LENGTH_SHORT).show();
                }
            });

It is standard matplotlib.pyplot:

...
import matplotlib.pyplot as plt
plt.ylim(10, 40)

Or simpler, as mwaskom comments below:

ax.set(ylim=(10, 40))

Add this function to your ~/.bashrc and restart your terminal or run source ~/.bashrc

function lock() {
    gnome-screensaver
    gnome-screensaver-command --lock
}

This way these two commands will run whenever you enter lock in your terminal.

In your specific case creating an alias may work, but I don't recommend it. Intuitively we would think the value of an alias would run the same as if you entered the value in the terminal. However that's not the case:

The rules concerning the definition and use of aliases are somewhat confusing.

and

For almost every purpose, shell functions are preferred over aliases.

So don't use an alias unless you have to. https://ss64.com/bash/alias.html

Use the timeIntervalSinceDate method

NSTimeInterval secondsElapsed = [secondDate timeIntervalSinceDate:firstDate];

NSTimeInterval is just a double, define in NSDate like this:

typedef double NSTimeInterval;

Looks like I'm late to the game, but this is a common question...

This is probably the code you want.

Please note that this code is in the public domain, from Usenet, MSDN, and the Excellerando blog.

Public Function ComputerName() As String
'' Returns the host name

'' Uses late-binding: bad for performance and stability, useful for 
'' code portability. The correct declaration is:

'   Dim objNetwork  As IWshRuntimeLibrary.WshNetwork
'   Set objNetwork = New IWshRuntimeLibrary.WshNetwork

    Dim objNetwork As Object
    Set objNetwork = CreateObject("WScript.Network")

    ComputerName = objNetwork.ComputerName
    
    Set objNetwork = Nothing

End Function

You'll probably need this, too:

Public Function UserName(Optional WithDomain As Boolean = False) As String
'' Returns the user's network name

'' Uses late-binding: bad for performance and stability, useful for
'' code portability. The correct declaration is:

'   Dim objNetwork  As IWshRuntimeLibrary.WshNetwork
'   Set objNetwork = New IWshRuntimeLibrary.WshNetwork


    Dim objNetwork As Object
    Set objNetwork = CreateObject("WScript.Network")

    If WithDomain Then
        UserName = objNetwork.UserDomain & "\" & objNetwork.UserName
    Else
        UserName = objNetwork.UserName
    End If
    
    Set objNetwork = Nothing

End Function

Check this out:

XAML:

<DataGrid Name="DataGrid1">
    <DataGrid.Columns>
        <DataGridTemplateColumn>
            <DataGridTemplateColumn.CellTemplate>
                <DataTemplate>
                    <Button Click="ChangeText">Show/Hide</Button>
                </DataTemplate>
            </DataGridTemplateColumn.CellTemplate>
        </DataGridTemplateColumn>
    </DataGrid.Columns>
</DataGrid>

Method:

private void ChangeText(object sender, RoutedEventArgs e)
{
    DemoModel model = (sender as Button).DataContext as DemoModel;
    model.DynamicText = (new Random().Next(0, 100).ToString());
}

Class:

class DemoModel : INotifyPropertyChanged
{
    protected String _text;
    public String Text
    {
        get { return _text; }
        set { _text = value; RaisePropertyChanged("Text"); }
    }

    protected String _dynamicText;
    public String DynamicText
    {
        get { return _dynamicText; }
        set { _dynamicText = value; RaisePropertyChanged("DynamicText"); }
    }

    public event PropertyChangedEventHandler PropertyChanged;
    public void RaisePropertyChanged(String propertyName)
    {
        PropertyChangedEventHandler temp = PropertyChanged;
        if (temp != null)
        {
            temp(this, new PropertyChangedEventArgs(propertyName));
        }
    }
}

Initialization Code:

ObservableCollection<DemoModel> models = new ObservableCollection<DemoModel>();
models.Add(new DemoModel() { Text = "Some Text #1." });
models.Add(new DemoModel() { Text = "Some Text #2." });
models.Add(new DemoModel() { Text = "Some Text #3." });
models.Add(new DemoModel() { Text = "Some Text #4." });
models.Add(new DemoModel() { Text = "Some Text #5." });
DataGrid1.ItemsSource = models;

There is another way of performing the fit, which is by using the 'lmfit' package. It basically uses the cuve_fit but is much better in fitting and offers complex fitting as well. Detailed step by step instructions are given in the below link. http://cars9.uchicago.edu/software/python/lmfit/model.html#model.best_fit

For variable argument functions like printf and scanf, the arguments are promoted, for example, any smaller integer types are promoted to int, float is promoted to double.

scanf takes parameters of pointers, so the promotion rule takes no effect. It must use %f for float* and %lf for double*.

printf will never see a float argument, float is always promoted to double. The format specifier is %f. But C99 also says %lf is the same as %f in printf:

C99 §7.19.6.1 The fprintf function

l (ell) Specifies that a following d, i, o, u, x, or X conversion specifier applies to a long int or unsigned long int argument; that a following n conversion specifier applies to a pointer to a long int argument; that a following c conversion specifier applies to a wint_t argument; that a following s conversion specifier applies to a pointer to a wchar_t argument; or has no effect on a following a, A, e, E, f, F, g, or G conversion specifier.

Scaling horizontally ===> Thousands of minions will do the work together for you.

Scaling vertically ===> One big hulk will do all the work for you.

In my case problem was compiled framework architecture.
I'm running Xcode 11 and using Swift 5.1

• I had 3 target like:
  • MyApp
  • MyAppTests
  • MyAppFrameWork

I was tried to run tests but MyAppFrameWork product was compiled for Generic iOS Devices and the Test target needed an arm x86-64, So I rebuilt Framework for iOS Simulators and test cases successfuly start running.

You can use PSCP to copy files from Windows to Linux.

1. Download PSCP from putty.org
2. Open cmd in the directory with pscp.exe file

3. Type command pscp source_file user@host:destination_file

   • Ex.
     pscp sample.txt [email protected]:/mydata/sample.txt

Reference

Use the in operator:

testArray = 'key1' in obj;

Sidenote: What you got there, is actually no jQuery object, but just a plain JavaScript Object.

I disabled all installed extensions in Chrome - works for me. I have now clear console without errors.

It's best to use miske's answer.

Properly installing natecarlson's repository

If you really want to use natecarlson's repository, the instructions just below can do any of the following:

1. set it up from scratch
2. repair it if apt-get update gives a 404 error after add-apt-repository
3. repair it if apt-get update gives a NO_PUBKEY error after manually adding it to /etc/apt/sources.list

Open a terminal and run the following:

sudo -i

Enter your password if necessary, then paste the following into the terminal:

export GOOD_RELEASE='precise'
export BAD_RELEASE="`lsb_release -cs`"
cd /etc/apt
sed -i '/natecarlson\/maven3/d' sources.list
cd sources.list.d
rm -f natecarlson-maven3-*.list*
apt-add-repository -y ppa:natecarlson/maven3
mv natecarlson-maven3-${BAD_RELEASE}.list natecarlson-maven3-${GOOD_RELEASE}.list
sed -i "s/${BAD_RELEASE}/${GOOD_RELEASE}/" natecarlson-maven3-${GOOD_RELEASE}.list
apt-get update
exit
echo Done!

Removing natecarlson's repository

If you installed natecarlson's repository (either using add-apt-repository or manually added to /etc/apt/sources.list) and you don't want it anymore, open a terminal and run the following:

sudo -i

Enter your password if necessary, then paste the following into the terminal:

cd /etc/apt
sed -i '/natecarlson\/maven3/d' sources.list
cd sources.list.d
rm -f natecarlson-maven3-*.list*
apt-get update
exit
echo Done!

A secure random API was just added to dart:math

new Random.secure()

dart:math Random added a secure constructor returning a cryptographically secure random generator which reads from the entropy source provided by the embedder for every generated random value.

which delegates to window.crypto.getRandomValues() in the browser and to the OS (like urandom on the server)

I have trouble wrapping my head around lambda expressions because I work in Visual FoxPro, which has Macro substitution and the ExecScript{} and Evaluate() functions, which seem to serve much the same purpose.

? Calculator(10, 23, "a + b")
? Calculator(10, 23, "a - b");

FUNCTION Calculator(a, b, op)
RETURN Evaluate(op)

One definite benefit to using formal lambdas is (I assume) compile-time checking: Fox won't know if you typo the text string above until it tries to run it.

This is also useful for data-driven code: you can store entire routines in memo fields in the database and then just evaluate them at run-time. This lets you tweak part of the application without actually having access to the source. (But that's another topic altogether.)

it's amazing there's no simple solution for such a simple task on windows, I created this little cmd script that you can use to define aliases on windows (instructions are at the file header itself):

https://gist.github.com/benjamine/5992592

this is pretty much the same approach used by tools like NPM or ruby gems to register global commands.

Say your string is:

let str = `word1
word2;word3,word4,word5;word7
word8,word9;word10`;

You want to split the string by the following delimiters:

• Colon
• Semicolon
• New line

You could split the string like this:

let rawElements = str.split(new RegExp('[,;\n]', 'g'));

Finally, you may need to trim the elements in the array:

let elements = rawElements.map(element => element.trim());

If your form is PHP based, it would work this way within your " <?php $data = array(" code:

    'onkeypress' => 'return /[a-z 0-9]/i.test(event.key)', 

I do not think HTML has such functionality. The only thing I can imagine would do the trick is to do some server-side processing. Perhaps you could get an image snapshot of the webpage you want to serve, scale it on the server and serve it to the client. This would be a non-interactive page however. (maybe an imagemap could have the link, but still.)

Another idea would be to have a server-side component that would alter the HTML. SOrt of like the firefox 2.0 zoom feature. this of course is not perfect zooming, but is better than nothing.

Other than that, I am out of ideas.

Incredibly late to the party (my apologies) but a more generic solution than those provided here can be implemented (will work with primitives and non-primitives alike):

public static void swap(final Object array, final int i, final int j) {
    final Object atI = Array.get(array, i);
    Array.set(array, i, Array.get(array, j));
    Array.set(array, j, atI);
}

You lose compile-time safety, but it should do the trick.

Note I: You'll get a NullPointerException if the given array is null, an IllegalArgumentException if the given array is not an array, and an ArrayIndexOutOfBoundsException if either of the indices aren't valid for the given array.

Note II: Having separate methods for this for every array type (Object[] and all primitive types) would be more performant (using the other approaches given here) since this requires some boxing/unboxing. But it'd also be a whole lot more code to write/maintain.

You could also use PHPMailer class at https://github.com/PHPMailer/PHPMailer .

It allows you to use the mail function or use an smtp server transparently. It also handles HTML based emails and attachments so you don't have to write your own implementation.

The class is stable and it is used by many other projects like Drupal, SugarCRM, Yii, and Joomla!

Here is an example from the page above:

<?php
require 'PHPMailerAutoload.php';

$mail = new PHPMailer;

$mail->isSMTP();                                      // Set mailer to use SMTP
$mail->Host = 'smtp1.example.com;smtp2.example.com';  // Specify main and backup SMTP servers
$mail->SMTPAuth = true;                               // Enable SMTP authentication
$mail->Username = '[email protected]';                 // SMTP username
$mail->Password = 'secret';                           // SMTP password
$mail->SMTPSecure = 'tls';                            // Enable encryption, 'ssl' also accepted

$mail->From = '[email protected]';
$mail->FromName = 'Mailer';
$mail->addAddress('[email protected]', 'Joe User');     // Add a recipient
$mail->addAddress('[email protected]');               // Name is optional
$mail->addReplyTo('[email protected]', 'Information');
$mail->addCC('[email protected]');
$mail->addBCC('[email protected]');

$mail->WordWrap = 50;                                 // Set word wrap to 50 characters
$mail->addAttachment('/var/tmp/file.tar.gz');         // Add attachments
$mail->addAttachment('/tmp/image.jpg', 'new.jpg');    // Optional name
$mail->isHTML(true);                                  // Set email format to HTML

$mail->Subject = 'Here is the subject';
$mail->Body    = 'This is the HTML message body <b>in bold!</b>';
$mail->AltBody = 'This is the body in plain text for non-HTML mail clients';

if(!$mail->send()) {
    echo 'Message could not be sent.';
    echo 'Mailer Error: ' . $mail->ErrorInfo;
} else {
    echo 'Message has been sent';
}

When using ES6 code in React always use arrow functions, because the this context is automatically binded with it

Use this:

(videos) => {
    this.setState({ videos: videos });
    console.log(this.state.videos);
};

instead of:

function(videos) {
    this.setState({ videos: videos });
    console.log(this.state.videos);
};

ProgressDialog has become deprecated since API Level 26 https://developer.android.com/reference/android/app/ProgressDialog.html

I include a ProgressBar in my layout

   <ProgressBar
        android:layout_weight="1"
        android:id="@+id/progressBar_cyclic"
        android:visibility="gone"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:minHeight="40dp"
        android:minWidth="40dp" />

and change its visibility to .GONE | .VISIBLE depending on the use case.

    progressBar_cyclic.visibility = View.VISIBLE

Addition to the answer of Brett DeWoody: (which is updated now)

var dataValue = obj.srcElement.attributes.data.nodeValue;

Works fine in IE(9+) and Chrome, but Firefox does not know the srcElement property. I found:

var dataValue = obj.currentTarget.attributes.data.nodeValue;

Works in IE, Chrome and FF, I did not test Safari.

Here is a snippet I wrote; to ask for users' password and set it in /etc/passwd. You can manipulate it a little probably to get what you need:

echo -n " Please enter the password for the given user: "
read userPass
useradd $userAcct && echo -e "$userPass\n$userPass\n" | passwd $userAcct > /dev/null 2>&1 && echo " User account has been created." || echo " ERR -- User account creation failed!"

1. I recommend and use TouchJSON for parsing JSON.

2. To answer your comment to Alex. Here's quick code that should allow you to get the fields like activity_details, last_name, etc. from the json dictionary that is returned:

   NSDictionary *userinfo=[jsondic valueforKey:@"#data"];
   NSDictionary *user;
   NSInteger i = 0;
   NSString *skey;
   if(userinfo != nil){
       for( i = 0; i < [userinfo count]; i++ ) {
           if(i)
               skey = [NSString stringWithFormat:@"%d",i];
           else
               skey = @"";
   
           user = [userinfo objectForKey:skey];
           NSLog(@"activity_details:%@",[user objectForKey:@"activity_details"]);
           NSLog(@"last_name:%@",[user objectForKey:@"last_name"]);
           NSLog(@"first_name:%@",[user objectForKey:@"first_name"]);
           NSLog(@"photo_url:%@",[user objectForKey:@"photo_url"]);
       }
   }
   

Might want to try putting the PHP function on another PHP page, and use an AJAX call to set the variable.

I used this, and it worked perfectly.

error: function(xhr, status, error){
     alertify.error(JSON.parse(xhr.responseText).error);
}

It's entirely possible in browser-side javascript.

The easy way:

The readAsDataURL() method might already encode it as base64 for you. You'll probably need to strip out the beginning stuff (up to the first ,), but that's no biggie. This would take all the fun out though.

The hard way:

If you want to try it the hard way (or it doesn't work), look at readAsArrayBuffer(). This will give you a Uint8Array and you can use the method specified. This is probably only useful if you want to mess with the data itself, such as manipulating image data or doing other voodoo magic before you upload.

There are two methods:

• Convert to string and use the built-in btoa or similar
  • I haven't tested all cases, but works for me- just get the char-codes
• Convert directly from a Uint8Array to base64

I recently implemented tar in the browser. As part of that process, I made my own direct Uint8Array->base64 implementation. I don't think you'll need that, but it's here if you want to take a look; it's pretty neat.

What I do now:

The code for converting to string from a Uint8Array is pretty simple (where buf is a Uint8Array):

function uint8ToString(buf) {
    var i, length, out = '';
    for (i = 0, length = buf.length; i < length; i += 1) {
        out += String.fromCharCode(buf[i]);
    }
    return out;
}

From there, just do:

var base64 = btoa(uint8ToString(yourUint8Array));

Base64 will now be a base64-encoded string, and it should upload just peachy. Try this if you want to double check before pushing:

window.open("data:application/octet-stream;base64," + base64);

This will download it as a file.

Other info:

To get the data as a Uint8Array, look at the MDN docs:

• https://developer.mozilla.org/en/DOM/FileReader

Take a look at OPENROWSET, and do something like:

SELECT * INTO #TEMPTABLE FROM OPENROWSET('SQLNCLI'
     , 'Server=(local)\SQL2008;Trusted_Connection=yes;',
     'SELECT * FROM ' + @tableName)

You can use following Node.js module to do it with a breeze:

https://www.npmjs.com/package/mssql-to-csv

For some reason @Alejandro Gracia answer starts working only after a few second. I found a solution that blocks the RecyclerView instantaneously:

recyclerView.addOnItemTouchListener(new RecyclerView.OnItemTouchListener() {
            @Override
            public boolean onInterceptTouchEvent(RecyclerView rv, MotionEvent e) {
                return true;
            }
            @Override
            public void onTouchEvent(RecyclerView rv, MotionEvent e) {
            }
            @Override
            public void onRequestDisallowInterceptTouchEvent(boolean disallowIntercept) {
            }
        });

In Addition you also need to be sure that you have

 <context:annotation-config/> 

in your SPring configuration xml.

I also would recommend you to read this blog post. It helped me alot. Spring blog - Ajax Simplifications in Spring 3.0

Update:

just checked my working code where I have @RequestBody working correctly. I also have this bean in my config:

<bean id="jacksonMessageConverter" class="org.springframework.http.converter.json.MappingJacksonHttpMessageConverter"></bean>
 <bean class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter">
<property name="messageConverters">
  <list>
    <ref bean="jacksonMessageConverter"/>
  </list>
</property>
</bean>

May be it would be nice to see what Log4j is saying. it usually gives more information and from my experience the @RequestBody will fail if your request's content type is not Application/JSON. You can run Fiddler 2 to test it, or even Mozilla Live HTTP headers plugin can help.

Tags and branch are completely unrelated, since tags refer to a specific commit, and branch is a moving reference to the last commit of a history. Branches go, tags stay.

So when you tag a commit, git doesn't care which commit or branch is checked out, if you provide him the SHA1 of what you want to tag.

I can even tag by refering to a branch (it will then tag the tip of the branch), and later say that the branch's tip is elsewhere (with git reset --hard for example), or delete the branch. The tag I created however won't move.

I got this error when I was playing around while reading progit. I made a local repository, then fetched it in another repo on the same file system, made an edit and tried to push. After reading NowhereMan's answer, a quick fix was to go to the "remote" directory and temporarily checkout another commit, push from the directory I made changes in, then go back and put the head back on master.

Works like a charm!

.imageClass {
  -webkit-filter: drop-shadow(12px 12px 7px rgba(0,0,0,0.5));
}

Voila! That's it! Obviously this won't work in ie, but who cares...

If I understand your problem correctly you may have bigger issues. You said that other objects may subscribe to these events. When the object is serialized and deserialized the other objects (the ones that you don't have control of) will lose their event handlers.

If you're not worried about that then keeping a reference to your event handler should be good enough. If you are worried about the side-effects of other objects losing their event handlers, then you may want to rethink your caching strategy.

I was having the same issue. So I went to the Java options through Control Panel. Copied the web address that I was having an issue with to the exceptions and it was fixed.

Create a StringBuilder with the string and use one of its insert overloaded method:

StringBuilder sb = new StringBuilder("JAYARAM");
for (int i=1; i<sb.length(); i+=2)
    sb.insert(i, ' ');
System.out.println(sb.toString());

The above prints:

J A Y A R A M

This is a bit old thread, but if someone experimenting, learning, or testing basic flask app, started from a script that runs in the background, the quickest way to stop it is to kill the process running on the port you are running your app on. Note: I am aware the author is looking for a way not to kill or stop the app. But this may help someone who is learning.

sudo netstat -tulnp | grep :5001

You'll get something like this.

tcp 0 0 0.0.0.0:5001 0.0.0.0:* LISTEN 28834/python

To stop the app, kill the process

sudo kill 28834

This can be achieved by using constructor function instead of literal

var o = new function() {
  this.foo = "it";
  this.bar = this.foo + " works"
}

alert(o.bar)

this looks like PHP to me. I'll delete if it's some other language.

Simply unset($arr[1]);

Here is example using xargs:

$ xargs -d '\n' -I% sh -c 'echo % | wc -c' < file

Simply you could use:

PartialView("../ABC/XXX")

Google Maps actually uses signed values to represent the position:

• Latitude : max/min 90.0000000 to -90.0000000

• Longitude : max/min 180.0000000 to -180.0000000

So if you want to work with Coordinates in your projects you would need DECIMAL(10,7) ie. for SQL.

I'd very simply:

• Open the file for read/write
• Read/seek through it until the start of the line you want to delete
• Set the write pointer to the current read pointer
• Read through to the end of the line we're deleting and skip the newline delimiters (counting the number of characters as we go, we'll call it nline)
• Read byte-by-byte and write each byte to the file
• When finished truncate the file to (orig_length - nline).

I downloaded a different installer "SQL Server 2014 Express with Advanced Services" and found Instance Features in it. Thanks for Alberto Solano's answer, it was really helpful.

My first installer was "SQL Server 2014 Express". It installed only SQL Management Studio and tools without Instance features. After installation "SQL Server 2014 Express with Advanced Services" my LocalDB is now alive!!!

Java's String implements hashCode like this:

public int hashCode()

Returns a hash code for this string. The hash code for a String object is computed as

     s[0]*31^(n-1) + s[1]*31^(n-2) + ... + s[n-1]

using int arithmetic, where s[i] is the ith character of the string, n is the length of the string, and ^ indicates exponentiation. (The hash value of the empty string is zero.) 

So something like this:

int HashTable::hash (string word) {
    int result = 0;
    for(size_t i = 0; i < word.length(); ++i) {
        result += word[i] * pow(31, i);
    }
    return result;
}

Looks to me as MySQL 3.6 gives the following error while MySQL 3.7 no longer errors out. I am yet to find anything in the documentation regarding this fix.

Follow the below steps to consume RestFul in android.

Step1

Create a android blank project.

Step2

Need internet access permission. write the below code in AndroidManifest.xml file.

 <uses-permission android:name="android.permission.INTERNET">
</uses-permission>

Step3

Need RestFul url which is running in another server or same machine.

Step4

Make a RestFul Client which will extends AsyncTask. See RestFulPost.java.

Step5

Make DTO class for RestFull Request and Response.

RestFulPost.java

package javaant.com.consuming_restful.restclient;
import android.app.ProgressDialog;
import android.content.Context;
import android.os.AsyncTask;
import android.util.Log;
import com.google.gson.Gson;
import org.apache.http.HttpResponse;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.DefaultHttpClient;
import org.apache.http.util.EntityUtils;
import java.util.Map;
import javaant.com.consuming_restful.util.Util;
/**
 * Created by Nirmal Dhara on 29-10-2015.
 */
public class RestFulPost extends AsyncTask<map, void,="" string=""> {
    RestFulResult restFulResult = null;
    ProgressDialog Asycdialog;
    String msg;
    String task;
    public RestFulPost(RestFulResult restFulResult, Context context, String msg,String task) {
        this.restFulResult = restFulResult;
        this.task=task;
        this.msg = msg;
        Asycdialog = new ProgressDialog(context);
    }
    @Override
    protected String doInBackground(Map... params) {
        String responseStr = null;
        Object dataMap = null;
        HttpPost httpost = new HttpPost(params[0].get("url").toString());

        try {
            dataMap = (Object) params[0].get("data");
            Gson gson = new Gson();
            Log.d("data  map", "data map------" + gson.toJson(dataMap));
            httpost.setEntity(new StringEntity(gson.toJson(dataMap)));
            httpost.setHeader("Accept", "application/json");
            httpost.setHeader("Content-type", "application/json");
            DefaultHttpClient httpclient= Util.getClient();
            HttpResponse response = httpclient.execute(httpost);
            int statusCode = response.getStatusLine().getStatusCode();
            Log.d("resonse code", "----------------" + statusCode);

            if (statusCode == 200)
                responseStr = EntityUtils.toString(response.getEntity());
            if (statusCode == 404) {
                responseStr = "{\n" +
                        "\"status\":\"fail\",\n" +
                        " \"data\":{\n" +
                        "\"ValidUser\":\"Service not available\",\n" +
                        "\"code\":\"404\"\n" +
                        "}\n" +
                        "}";
            }

        } catch (Exception e) {
            e.printStackTrace();
        }
        return responseStr;
    }
    @Override
    protected void onPreExecute() {
        Asycdialog.setMessage(msg);
        //show dialog
        Asycdialog.show();
        super.onPreExecute();
    }
    @Override
    protected void onPostExecute(String s) {
        Asycdialog.dismiss();
        restFulResult.onResfulResponse(s,task);
    }
}

For more details and complete code please visit http://javaant.com/consume-a-restful-webservice-in-android/#.VwzbipN96Hs

There is plenty of libraries out there and I'm using this one: https://github.com/nerde/rest-resource. This was created by me, and, as you can see in the documentation, it's way cleaner and simpler than the other ones. It's not focused on Android, but I'm using in it and it's working pretty well.

It supports HTTP Basic Auth. It does the dirty job of serializing and deserializing JSON objects. You will like it, specially if your API is Rails like.

So, I had this code:

<div class="dropdown-select-wrapper" *ngIf="contentData">
    <button mat-stroked-button [disableRipple]="true" class="mat-button" (click)="openSelect()" [ngClass]="{'only-icon': !contentData?.buttonText?.length}">
      <i *ngIf="contentData.iconClassInfo" class="dropdown-icon {{contentData.iconClassInfo.name}}"></i>
      <span class="button-text" *ngIf="contentData.buttonText">{{contentData.buttonText}}</span>
    </button>
    <mat-select class="small-dropdown-select" [formControl]="theFormControl" #buttonSelect (selectionChange)="onSelect(buttonSelect.selected)" (click)="$event.stopPropagation();">
      <mat-option *ngFor="let option of options" [ngClass]="{'selected-option': buttonSelect.selected?.value === option[contentData.optionsStructure.valName]}" [disabled]="buttonSelect.selected?.value === option[contentData.optionsStructure.valName] && contentData.optionSelectedWillDisable" [value]="option[contentData.optionsStructure.valName]">
        {{option[contentData.optionsStructure.keyName]}}
      </mat-option>
    </mat-select>
  </div>

Here I was using standalone formControl, and I was getting the error we are talking about, which made no sense for me, since I wasn't working with formgroups or formarrays... it only disappeared when I added the *ngIf to the select it self, so is not being used before it actually exists. That's what solved the issue in my case.

<mat-select class="small-dropdown-select" [formControl]="theFormControl" #buttonSelect (selectionChange)="onSelect(buttonSelect.selected)" (click)="$event.stopPropagation();" *ngIf="theFormControl">
          <mat-option *ngFor="let option of options" [ngClass]="{'selected-option': buttonSelect.selected?.value === option[contentData.optionsStructure.valName]}" [disabled]="buttonSelect.selected?.value === option[contentData.optionsStructure.valName] && contentData.optionSelectedWillDisable" [value]="option[contentData.optionsStructure.valName]">
            {{option[contentData.optionsStructure.keyName]}}
          </mat-option>
        </mat-select>

Try this:

 <item
   android:state_focused="true"
   android:state_enabled="true"
   android:drawable="@drawable/map_toolbar_details_selected" />

Also for colors i had success with

<selector
        xmlns:android="http://schemas.android.com/apk/res/android">
        <item
            android:state_selected="true"

            android:color="@color/primary_color" />
        <item
            android:color="@color/secondary_color" />
</selector>

Value of %TEMP% environment variable is often user-specific and Windows sets it up with regard to currently logged in user account. Some user accounts may have no user profile, for example when your process runs as a service on SYSTEM, LOCALSYSTEM or other built-in account, or is invoked by IIS application with AppPool identity with Create user profile option disabled. So even when you do not overwrite %TEMP% variable explicitly, Windows may use c:\temp or even c:\windows\temp folders for, lets say, non-usual user accounts. And what's more important, process might have no access rights to this directory!

The set statement doesn't treat spaces the way you expect; your variable is really named Pathname[space] and is equal to [space]C:\Program Files.

Remove the spaces from both sides of the = sign, and put the value in double quotes:

set Pathname="C:\Program Files"

Also, if your command prompt is not open to C:\, then using cd alone can't change drives.

Use

cd /d %Pathname%

or

pushd %Pathname%

instead.

I imagine that you're calling your download in a background thread such as provided by a SwingWorker. If so, then simply call your next code sequentially in the same SwingWorker's doInBackground method.

If you mean that you can do this:

CREATE TABLE mytable_d (
ID          TINYINT NOT NULL AUTO_INCREMENT PRIMARY KEY,
Name        VARCHAR(255) NOT NULL,
UNIQUE(Name)
) ENGINE=InnoDB;


ALTER TABLE mytable
ADD COLUMN DID tinyint(5) NOT NULL,
ADD CONSTRAINT mytable_ibfk_4 
      FOREIGN KEY (DID) 
        REFERENCES mytable_d (ID) ON DELETE CASCADE;

 > OK.

But then:

ALTER TABLE mytable
DROP KEY AID ;

gives error.

You can drop the index and create a new one in one ALTER TABLE statement:

ALTER TABLE mytable
DROP KEY AID ,
ADD UNIQUE KEY AID (AID, BID, CID, DID);

8

This does not require a HTML entity if you are using a modern encoding (such as UTF-8). And if you're not already, you probably should be.

Yes, you need to make getInstance() synchronized. If it's not there might arise a situation where multiple instances of the class can be made.

Consider the case where you have two threads that call getInstance() at the same time. Now imagine T1 executes just past the instance == null check, and then T2 runs. At this point in time the instance is not created or set, so T2 will pass the check and create the instance. Now imagine that execution switches back to T1. Now the singleton is created, but T1 has already done the check! It will proceed to make the object again! Making getInstance() synchronized prevents this problem.

There a few ways to make singletons thread-safe, but making getInstance() synchronized is probably the simplest.

http://computinglife.wordpress.com/2008/11/20/why-do-hash-functions-use-prime-numbers/

Pretty clear explanation, with pictures too.

Edit: As a summary, primes are used because you have the best chance of obtaining a unique value when multiplying values by the prime number chosen and adding them all up. For example given a string, multiplying each letter value with the prime number and then adding those all up will give you its hash value.

A better question would be, why exactly the number 31?

AVD cant find SDK root, possibly because they are in different directories.Set your environment variables as shown in the screenshot below:

 @Html.TextBox("Receivers", Model, new { @class = "form-control", style = "width: 300px", @readonly = "readonly" })

I recently made an example of how to use events in c#, and posted it on my blog. I tried to make it as clear as possible, with a very simple example. In case it might help anyone, here it is: http://www.konsfik.com/using-events-in-csharp/

It includes description and source code (with lots of comments), and it mainly focuses on a proper (template - like) usage of events and event handlers.

Some key points are:

• Events are like "sub - types of delegates", only more constrained (in a good way). In fact an event's declaration always includes a delegate (EventHandlers are a type of delegate).

• Event Handlers are specific types of delegates (you may think of them as a template), which force the user to create events which have a specific "signature". The signature is of the format: (object sender, EventArgs eventarguments).

• You may create your own sub-class of EventArgs, in order to include any type of information the event needs to convey. It is not necessary to use EventHandlers when using events. You may completely skip them and use your own kind of delegate in their place.

• One key difference between using events and delegates, is that events can only be invoked from within the class that they were declared in, even though they may be declared as public. This is a very important distinction, because it allows your events to be exposed so that they are "connected" to external methods, while at the same time they are protected from "external misuse".

My answer addresses EF core. I reference this github issue, and the docs on configuring DbContext:

Simple

Override the OnConfiguring method of your DbContext class (YourCustomDbContext) as shown here to use a ConsoleLoggerProvider; your queries should log to the console:

public class YourCustomDbContext : DbContext
{
    #region DefineLoggerFactory
    public static readonly LoggerFactory MyLoggerFactory
        = new LoggerFactory(new[] {new ConsoleLoggerProvider((_, __) => true, true)});
    #endregion


    #region RegisterLoggerFactory
    protected override void OnConfiguring(DbContextOptionsBuilder optionsBuilder)
        => optionsBuilder
            .UseLoggerFactory(MyLoggerFactory); // Warning: Do not create a new ILoggerFactory instance each time                
    #endregion
}

Complex

This Complex case avoids overriding the DbContext OnConfiguring method. , which is discouraged in the docs: "This approach does not lend itself to testing, unless the tests target the full database."

This Complex case uses:

• The IServiceCollection in Startup class ConfigureServices method (instead of overriding the OnConfiguring method; the benefit is a looser coupling between the DbContext and the ILoggerProvider you want to use)
• An implementation of ILoggerProvider (instead of using the ConsoleLoggerProvider implementation shown above; benefit is our implementation shows how we would log to File (I don't see a File Logging Provider shipped with EF Core))

Like this:

public class Startup

    public void ConfigureServices(IServiceCollection services)
    {
        ...
        var lf = new LoggerFactory();
        lf.AddProvider(new MyLoggerProvider());

        services.AddDbContext<YOUR_DB_CONTEXT>(optionsBuilder => optionsBuilder
                .UseSqlServer(connection_string)
                //Using the LoggerFactory 
                .UseLoggerFactory(lf));
        ...
    }
}

Here's the implementation of a MyLoggerProvider (and its MyLogger which appends its logs to a File you can configure; your EF Core queries will appear in the file.)

public class MyLoggerProvider : ILoggerProvider
{
    public ILogger CreateLogger(string categoryName)
    {
        return new MyLogger();
    }

    public void Dispose()
    { }

    private class MyLogger : ILogger
    {
        public bool IsEnabled(LogLevel logLevel)
        {
            return true;
        }

        public void Log<TState>(LogLevel logLevel, EventId eventId, TState state, Exception exception, Func<TState, Exception, string> formatter)
        {
            File.AppendAllText(@"C:\temp\log.txt", formatter(state, exception));
            Console.WriteLine(formatter(state, exception));
        }

        public IDisposable BeginScope<TState>(TState state)
        {
            return null;
        }
    } 
}

if exist <insert file name here> (
    rem file exists
) else (
    rem file doesn't exist
)

Or on a single line (if only a single action needs to occur):

if exist <insert file name here> <action>

for example, this opens notepad on autoexec.bat, if the file exists:

if exist c:\autoexec.bat notepad c:\autoexec.bat

The Natural Language Toolkit (nltk.org) has what you need. This group posting indicates this does it:

import nltk.data

tokenizer = nltk.data.load('tokenizers/punkt/english.pickle')
fp = open("test.txt")
data = fp.read()
print '\n-----\n'.join(tokenizer.tokenize(data))

(I haven't tried it!)

Well, if you really want to show the memory peak and some more in-depth statistics i recommend using a profiler such as valgrind. A nice valgrind front-end is alleyoop.

Any combination of Ctrl + Alt + Shift and N.

Ctrl + Shift + T in idea8 is also excellent.

There is a complete keymap in the online help too.

Though it's probably suggested to get some heavier validation via JS or on the server, HTML5 does support this via the pattern attribute.

<input type= "text" name= "name" pattern= "[0-9]"  title= "Title"/>

You could use what sep16 on php.net recommends:

<?php

parse_str(implode('&', array_slice($argv, 1)), $_GET);

?>

It behaves exactly like you'd expect with cgi-php.

$ php -f myfile.php type=daily a=1 b[]=2 b[]=3

will set $_GET['type'] to 'daily', $_GET['a'] to '1' and $_GET['b'] to array('2', '3').

For Kotlin Here is added the lambda expression and Optimized the Code.

   radioGroup.setOnCheckedChangeListener { radioGroup, optionId ->
        run {
            when (optionId) {
                R.id.radioButton1 -> {
                    // do something when radio button 1 is selected
                }
                R.id.radioButton2 -> {
                    // do something when radio button 2 is selected
                }
                // add more cases here to handle other buttons in the your RadioGroup
            }
        }
    }

Hope this will help you. Thanks!

You could try a setInterval, if you know the exact length of the sound. You could have the setInterval play the sound every x seconds. X would be the length of your sound.

If you're using Amazon Linux it's CentOS-based, which is RedHat-based. RH-based installs use yum not apt-get. Something like yum search httpd should show you the available Apache packages - you likely want yum install httpd24.

Note: Amazon Linux 2 has diverged from CentOS since the writing of this answer, but still uses yum.

There is a built in function to compare lists:

Following is the syntax for cmp() method -

cmp(list1, list2)

#!/usr/bin/python

list1, list2 = [123, 'xyz'], [123, 'xyz']

print cmp(list1,list2)

When we run above program, it produces following result -

0

If the result is a tie, meaning that 0 is returned

I had the same issue and the following seemed to have addressed the issue.

a) Updated to latest version 1.3.5 and re-enabled all the diagnosis settings.

I was still getting the messages

b) Added the vendor folder with the dependent libraries to the workspace

This seems to have solved the problem.

Few lines solution without redundant pairs of variables:

corr_matrix = df.corr().abs()

#the matrix is symmetric so we need to extract upper triangle matrix without diagonal (k = 1)

sol = (corr_matrix.where(np.triu(np.ones(corr_matrix.shape), k=1).astype(np.bool))
                  .stack()
                  .sort_values(ascending=False))

#first element of sol series is the pair with the biggest correlation

Then you can iterate through names of variables pairs (which are pandas.Series multi-indexes) and theirs values like this:

for index, value in sol.items():
  # do some staff

You can use Raphaël—JavaScript Library and achieve it easily. It will work in IE also.

I had the same problem after setting up my environment on Windows 10. I have Python 3.6.2 x64 installed as my default Python distribution and is in my PATH so I can launch from cmd prompt.

I installed PyQt5 (pip install pyqt5) and Spyder (pip install spyder) which both installed w/out error and included all of the necessary dependencies.

To launch Spyder, I created a simple Python script (Spyder.py):

# Spyder Start Script
from spyder.app import start
start.main()

Then I created a Windows batch file (Spyder.bat):

@echo off
python c:\<path_to_Spyder_py>\Spyder.py

Lastly, I created a shortcut on my desktop which launches Spyder.bat and updated the icon to one I downloaded from the Spyder github project.

Works like a charm for me.

Here is my version, pretty much stuff from this thread is integrated (same counts for the test cases):

Object.defineProperty(Object.prototype, "equals", {
    enumerable: false,
    value: function (obj) {
        var p;
        if (this === obj) {
            return true;
        }

        // some checks for native types first

        // function and sring
        if (typeof(this) === "function" || typeof(this) === "string" || this instanceof String) { 
            return this.toString() === obj.toString();
        }

        // number
        if (this instanceof Number || typeof(this) === "number") {
            if (obj instanceof Number || typeof(obj) === "number") {
                return this.valueOf() === obj.valueOf();
            }
            return false;
        }

        // null.equals(null) and undefined.equals(undefined) do not inherit from the 
        // Object.prototype so we can return false when they are passed as obj
        if (typeof(this) !== typeof(obj) || obj === null || typeof(obj) === "undefined") {
            return false;
        }

        function sort (o) {
            var result = {};

            if (typeof o !== "object") {
                return o;
            }

            Object.keys(o).sort().forEach(function (key) {
                result[key] = sort(o[key]);
            });

            return result;
        }

        if (typeof(this) === "object") {
            if (Array.isArray(this)) { // check on arrays
                return JSON.stringify(this) === JSON.stringify(obj);                
            } else { // anyway objects
                for (p in this) {
                    if (typeof(this[p]) !== typeof(obj[p])) {
                        return false;
                    }
                    if ((this[p] === null) !== (obj[p] === null)) {
                        return false;
                    }
                    switch (typeof(this[p])) {
                    case 'undefined':
                        if (typeof(obj[p]) !== 'undefined') {
                            return false;
                        }
                        break;
                    case 'object':
                        if (this[p] !== null 
                                && obj[p] !== null 
                                && (this[p].constructor.toString() !== obj[p].constructor.toString() 
                                        || !this[p].equals(obj[p]))) {
                            return false;
                        }
                        break;
                    case 'function':
                        if (this[p].toString() !== obj[p].toString()) {
                            return false;
                        }
                        break;
                    default:
                        if (this[p] !== obj[p]) {
                            return false;
                        }
                    }
                };

            }
        }

        // at least check them with JSON
        return JSON.stringify(sort(this)) === JSON.stringify(sort(obj));
    }
});

Here is my TestCase:

    assertFalse({}.equals(null));
    assertFalse({}.equals(undefined));

    assertTrue("String", "hi".equals("hi"));
    assertTrue("Number", new Number(5).equals(5));
    assertFalse("Number", new Number(5).equals(10));
    assertFalse("Number+String", new Number(1).equals("1"));

    assertTrue([].equals([]));
    assertTrue([1,2].equals([1,2]));
    assertFalse([1,2].equals([2,1]));
    assertFalse([1,2].equals([1,2,3]));

    assertTrue(new Date("2011-03-31").equals(new Date("2011-03-31")));
    assertFalse(new Date("2011-03-31").equals(new Date("1970-01-01")));

    assertTrue({}.equals({}));
    assertTrue({a:1,b:2}.equals({a:1,b:2}));
    assertTrue({a:1,b:2}.equals({b:2,a:1}));
    assertFalse({a:1,b:2}.equals({a:1,b:3}));

    assertTrue({1:{name:"mhc",age:28}, 2:{name:"arb",age:26}}.equals({1:{name:"mhc",age:28}, 2:{name:"arb",age:26}}));
    assertFalse({1:{name:"mhc",age:28}, 2:{name:"arb",age:26}}.equals({1:{name:"mhc",age:28}, 2:{name:"arb",age:27}}));

    assertTrue("Function", (function(x){return x;}).equals(function(x){return x;}));
    assertFalse("Function", (function(x){return x;}).equals(function(y){return y+2;}));

    var a = {a: 'text', b:[0,1]};
    var b = {a: 'text', b:[0,1]};
    var c = {a: 'text', b: 0};
    var d = {a: 'text', b: false};
    var e = {a: 'text', b:[1,0]};
    var f = {a: 'text', b:[1,0], f: function(){ this.f = this.b; }};
    var g = {a: 'text', b:[1,0], f: function(){ this.f = this.b; }};
    var h = {a: 'text', b:[1,0], f: function(){ this.a = this.b; }};
    var i = {
        a: 'text',
        c: {
            b: [1, 0],
            f: function(){
                this.a = this.b;
            }
        }
    };
    var j = {
        a: 'text',
        c: {
            b: [1, 0],
            f: function(){
                this.a = this.b;
            }
        }
    };
    var k = {a: 'text', b: null};
    var l = {a: 'text', b: undefined};

    assertTrue(a.equals(b));
    assertFalse(a.equals(c));
    assertFalse(c.equals(d));
    assertFalse(a.equals(e));
    assertTrue(f.equals(g));
    assertFalse(h.equals(g));
    assertTrue(i.equals(j));
    assertFalse(d.equals(k));
    assertFalse(k.equals(l));

<?php
$people = array(
    "maurice"=> array("name"=>"Andrew",
                      "age"=>40,
                      "gender"=>"male"),
    "muteti" => array("name"=>"Francisca",
                      "age"=>30,
                      "gender"=>"Female")
               );
'<pre>'.
print_r($people).
'</pre>';

/*foreach ($people as $key => $value) {
    echo "<h2><strong>$key</strong></h2><br>";
    foreach ($value as $values) {
    echo $values."<br>";;
    }
}*/
//echo $people['maurice']['name'];

?>

Is it possible that this is an error avoidance technique (advisable or not..)? Since "" is still a string, you would be able to call string functions on it that would result in an exception if it was NULL?

<script src="jquery.min.js"></script>
<table border="1" id="ReportTable" class="myClass">
    <tr bgcolor="#CCC">
      <td width="100">xxxxx</td>
      <td width="700">xxxxxx</td>
      <td width="170">xxxxxx</td>
      <td width="30">xxxxxx</td>
    </tr>
    <tr bgcolor="#FFFFFF">
      <td><?php                 
            $date = date_create($row_Recordset3['fecha']);
            echo date_format($date, 'd-m-Y');
            ?></td>
      <td><?php echo $row_Recordset3['descripcion']; ?></td>
      <td><?php echo $row_Recordset3['producto']; ?></td>
      <td><img src="borrar.png" width="14" height="14" class="clickable" onClick="eliminarSeguimiento(<?php echo $row_Recordset3['idSeguimiento']; ?>)" title="borrar"></td>
    </tr>
  </table>

  <input type="hidden" id="datatodisplay" name="datatodisplay">  
    <input type="submit" value="Export to Excel"> 

exporttable.php

<?php
header('Content-Type: application/force-download');
header('Content-disposition: attachment; filename=export.xls');
// Fix for crappy IE bug in download.
header("Pragma: ");
header("Cache-Control: ");
echo $_REQUEST['datatodisplay'];
?>

The “ERRORS” are the most useful things for the developers to know their mistakes and resolved them to make the system working perfect.

PHP provides some of better ways to know the developers why and where their piece of code is getting the errors, so by knowing those errors developers can make their code better in many ways.

Best ways to write following two lines on the top of script to get all errors messages:

error_reporting(E_ALL);
ini_set("display_errors", 1);

Another way to use debugger tools like xdebug in your IDE.

A ReentrantLock is unstructured, unlike synchronized constructs -- i.e. you don't need to use a block structure for locking and can even hold a lock across methods. An example:

private ReentrantLock lock;

public void foo() {
  ...
  lock.lock();
  ...
}

public void bar() {
  ...
  lock.unlock();
  ...
}

Such flow is impossible to represent via a single monitor in a synchronized construct.

Aside from that, ReentrantLock supports lock polling and interruptible lock waits that support time-out. ReentrantLock also has support for configurable fairness policy, allowing more flexible thread scheduling.

The constructor for this class accepts an optional fairness parameter. When set true, under contention, locks favor granting access to the longest-waiting thread. Otherwise this lock does not guarantee any particular access order. Programs using fair locks accessed by many threads may display lower overall throughput (i.e., are slower; often much slower) than those using the default setting, but have smaller variances in times to obtain locks and guarantee lack of starvation. Note however, that fairness of locks does not guarantee fairness of thread scheduling. Thus, one of many threads using a fair lock may obtain it multiple times in succession while other active threads are not progressing and not currently holding the lock. Also note that the untimed tryLock method does not honor the fairness setting. It will succeed if the lock is available even if other threads are waiting.

ReentrantLock may also be more scalable, performing much better under higher contention. You can read more about this here.

This claim has been contested, however; see the following comment:

In the reentrant lock test, a new lock is created each time, thus there is no exclusive locking and the resulting data is invalid. Also, the IBM link offers no source code for the underlying benchmark so its impossible to characterize whether the test was even conducted correctly.

When should you use ReentrantLocks? According to that developerWorks article...

The answer is pretty simple -- use it when you actually need something it provides that synchronized doesn't, like timed lock waits, interruptible lock waits, non-block-structured locks, multiple condition variables, or lock polling. ReentrantLock also has scalability benefits, and you should use it if you actually have a situation that exhibits high contention, but remember that the vast majority of synchronized blocks hardly ever exhibit any contention, let alone high contention. I would advise developing with synchronization until synchronization has proven to be inadequate, rather than simply assuming "the performance will be better" if you use ReentrantLock. Remember, these are advanced tools for advanced users. (And truly advanced users tend to prefer the simplest tools they can find until they're convinced the simple tools are inadequate.) As always, make it right first, and then worry about whether or not you have to make it faster.

One final aspect that's gonna become more relevant in the near future has to do with Java 15 and Project Loom. In the (new) world of virtual threads, the underlying scheduler would be able to work much better with ReentrantLock than it's able to do with synchronized, that's true at least in the initial Java 15 release but may be optimized later.

In the current Loom implementation, a virtual thread can be pinned in two situations: when there is a native frame on the stack — when Java code calls into native code (JNI) that then calls back into Java — and when inside a synchronized block or method. In those cases, blocking the virtual thread will block the physical thread that carries it. Once the native call completes or the monitor released (the synchronized block/method is exited) the thread is unpinned.

If you have a common I/O operation guarded by a synchronized, replace the monitor with a ReentrantLock to let your application benefit fully from Loom’s scalability boost even before we fix pinning by monitors (or, better yet, use the higher-performance StampedLock if you can).

Wow it took me forever to figure out this one. For some reason changing the attribute [assembly: AssemblyCompany("CompanyName")] at AssemblyInfo.cs made this error disappear. I was referencing a project that had a different value for the attribute [assembly: AssemblyCompany("CompanyName")]. I maked sure both projects had the same attribute value and it worked great!

You can open any folder, so if your projects are in the same tree, just open the folder beneath them.

Otherwise you can open 2 instances of Code as another option

To get the current Id on a View:

ViewContext.RouteData.Values["id"].ToString()

To get the current controller:

ViewContext.RouteData.Values["controller"].ToString() 

You can try the below example. Do use '-' before the width to ensure left indentation. By default they will be right indented; which may not suit your purpose.

System.out.printf("%2d. %-20s $%.2f%n",  i + 1, BOOK_TYPE[i], COST[i]);

Format String Syntax: http://docs.oracle.com/javase/7/docs/api/java/util/Formatter.html#syntax

Formatting Numeric Print Output: https://docs.oracle.com/javase/tutorial/java/data/numberformat.html

PS: This could go as a comment to DwB's answer, but i still don't have permissions to comment and so answering it.

In the simplest terms:

• --soft: uncommit changes, changes are left staged (index).
• --mixed (default): uncommit + unstage changes, changes are left in working tree.
• --hard: uncommit + unstage + delete changes, nothing left.

Use position: relative on the parent element.

Also note that had you not added any position attributes to any of the divs you wouldn't have seen this behavior. Juan explains further.

Ayman is right but, you can use it like that as well :

if( $("#field > div.field-item").text().indexOf('someText') >= 0) {
        $("#somediv").addClass("thisClass");
    }

The button isn't inside the input. Here:

input[type="text"] {
    width: 200px;
    height: 20px;
    padding-right: 50px;
}

input[type="submit"] {
    margin-left: -50px;
    height: 20px;
    width: 50px;
}

Example: http://jsfiddle.net/s5GVh/

With:

global index_add_counter

You are not defining, just declaring so it's like saying there is a global index_add_counter variable elsewhere, and not create a global called index_add_counter. As you name don't exists, Python is telling you it can not import that name. So you need to simply remove the global keyword and initialize your variable:

index_add_counter = 0

Now you can import it with:

from app import index_add_counter

The construction:

global index_add_counter

is used inside modules' definitions to force the interpreter to look for that name in the modules' scope, not in the definition one:

index_add_counter = 0
def test():
  global index_add_counter # means: in this scope, use the global name
  print(index_add_counter)

Stop MongoDB

Stop the mongod process by issuing the following command:

sudo service mongod stop

Remove Packages

Remove any MongoDB packages that you had previously installed.

sudo apt-get purge mongodb-org*

Remove Data Directories.

Remove MongoDB databases and log files.

 sudo rm -r /var/log/mongodb /var/lib/mongodb

Your data structure and your JSON do not match.

Your JSON is this:

{
    "JsonValues":{
        "id": "MyID",
        ...
    }
}

But the data structure you try to serialize it to is this:

class ValueSet
{
    [JsonProperty("id")]
    public string id
    {
        get;
        set;
    }
    ...
}

You are skipping a step: Your JSON is a class that has one property named JsonValues, which has an object of your ValueSet data structure as value.

Also inside your class your JSON is this:

"values": { ... }

Your data structure is this:

[JsonProperty("values")]
public List<Value> values
{
    get;
    set;
}

Note that { .. } in JSON defines an object, where as [ .. ] defines an array. So according to your JSON you don't have a bunch of values, but you have one values object with the properties value1 and value2 of type Value.

Since the deserializer expects an array but gets an object instead, it does the least non-destructive (Exception) thing it could do: skip the value. Your property values remains with it's default value: null.

If you can: Adjust your JSON. The following would match your data structure and is most likely what you actually want:

{
    "id": "MyID",

     "values": [
         {
            "id": "100",
            "diaplayName": "MyValue1"
         }, {
            "id": "200",
            "diaplayName": "MyValue2"
         }
     ]
}

Above, Abhishek mentions the command line differences specified in two URLS:

1. PhoneGap: http://docs.phonegap.com/en/edge/guide_cli_index.md.html

2. Cordova: http://cordova.apache.org/docs/en/3.0.0/guide_cli_index.md.html#The%20Command-line%20Interface

One thing to point out is that, as of this post, the phonegap one looks to be almost the same as the cordova one, and is probably not an accurate image of the command line option differences. As such, I installed both on my system so I could look at the differences.

These are just a few of them. Hopefully they are brought more in sync sometime. If anyone has better information, please tell me.

1. Adding platforms seems to be done differently between the two commands ( phonegap uses "install" command, cordova uses "platform add" command )
2. Adding/creating projects seems to be the same between the two commands ( same command line options supported )
3. Obviously, as has been stated, phonegap can use PhoneGap Build, so it has the corresponding options to trigger that or local builds
4. Quite a few other significant command line differences, simply by running "cordova help" and "phonegap help" and comparing the two.

I guess my point is that the phonegap CLI documention mentioned quite often is not really for the phonegap CLI, but for the cordova CLI, at this time. Please tell me if I am missing something. Thanks.

NSLocale* currentLocale = [NSLocale currentLocale];
[[NSDate date] descriptionWithLocale:currentLocale];  

or use

NSDateFormatter *dateFormatter=[[NSDateFormatter alloc] init]; 
[dateFormatter setDateFormat:@"yyyy-MM-dd HH:mm:ss"];
// or @"yyyy-MM-dd hh:mm:ss a" if you prefer the time with AM/PM 
NSLog(@"%@",[dateFormatter stringFromDate:[NSDate date]]);

This is similar to aSeptik's answer, but what about this approach? Wrap the CSS code which you want to disable using JavaScript in <noscript> tags. That way if javaScript is off, the CSS :hover will be used, otherwise the JavaScript effect will be used.

Example:

<noscript>
<style type="text/css">
ul#mainFilter a:hover {
  /* some CSS attributes here */
}
</style>
</noscript>
<script type="text/javascript">
$("ul#mainFilter a").hover(
     function(o){ /* ...do your stuff... */ }, 
     function(o){ /* ...do your stuff... */ });
</script>

On linux you can check epiphany-browser, resizes the windows you'll get same bugs as in ios. Both browsers uses Webkit.

Ubuntu/Mint:

sudo apt install epiphany-browser

Comparison of Techniques

I had a similar issue attempting to get a character count without the leading whitespace provided by wc, which led me to this page. After trying out the answers here, the following are the results from my personal testing on Mac (BSD Bash). Again, this is for character count; for line count you'd do wc -l. echo -n omits the trailing line break.

FOO="bar"
echo -n "$FOO" | wc -c                          # "       3"    (x)
echo -n "$FOO" | wc -c | bc                     # "3"           (v)
echo -n "$FOO" | wc -c | tr -d ' '              # "3"           (v)
echo -n "$FOO" | wc -c | awk '{print $1}'       # "3"           (v)
echo -n "$FOO" | wc -c | cut -d ' ' -f1         # "" for -f < 8 (x)
echo -n "$FOO" | wc -c | cut -d ' ' -f8         # "3"           (v)
echo -n "$FOO" | wc -c | perl -pe 's/^\s+//'    # "3"           (v)
echo -n "$FOO" | wc -c | grep -ch '^'           # "1"           (x)
echo $( printf '%s' "$FOO" | wc -c )            # "3"           (v)

I wouldn't rely on the cut -f* method in general since it requires that you know the exact number of leading spaces that any given output may have. And the grep one works for counting lines, but not characters.

bc is the most concise, and awk and perl seem a bit overkill, but they should all be relatively fast and portable enough.

Also note that some of these can be adapted to trim surrounding whitespace from general strings, as well (along with echo `echo $FOO`, another neat trick).

In Angular (currently on Angular-6) .subscribe() is a method on the Observable type. The Observable type is a utility that asynchronously or synchronously streams data to a variety of components or services that have subscribed to the observable.

The observable is an implementation/abstraction over the promise chain and will be a part of ES7 as a proposed and very supported feature. In Angular it is used internally due to rxjs being a development dependency.

An observable itself can be thought of as a stream of data coming from a source, in Angular this source is an API-endpoint, a service, a database or another observable. But the power it has is that it's not expecting a single response. It can have one or many values that are returned.

Link to rxjs for observable/subscribe docs here: https://rxjs-dev.firebaseapp.com/api/index/class/Observable#subscribe-

Subscribe takes 3 methods as parameters each are functions:

• next: For each item being emitted by the observable perform this function
• error: If somewhere in the stream an error is found, do this method
• complete: Once all items are complete from the stream, do this method

Within each of these, there is the potentional to pipe (or chain) other utilities called operators onto the results to change the form or perform some layered logic.

In the simple example above:

.subscribe(hero => this.hero = hero); basically says on this observable take the hero being emitted and set it to this.hero.

Adding this answer to give more context to Observables based off the documentation and my understanding.

If you are using Eclipse then you can do this by specifying the required size for the particular application in its Run Configuration's VM Arguments as EX: -Xms128m -Xmx512m

Or if you want all applications running from your eclipse to have the same specified size then you can specify this in the eclipse.ini file which is present in your Eclipse home directory.

To get the size of the JVM during Runtime you can use Runtime.totalMemory() which returns the total amount of memory in the Java virtual machine, measured in bytes.

The easiest way is to just learn how to do DOM traversing and manipulation with the plain DOM api (you would probably call this: normal JavaScript).

This can however be a pain for some things. (which is why libraries were invented in the first place).

Googling for "javascript DOM traversing/manipulation" should present you with plenty of helpful (and some less helpful) resources.

The articles on this website are pretty good: http://www.htmlgoodies.com/primers/jsp/

And as Nosredna points out in the comments: be sure to test in all browsers, because now jQuery won't be handling the inconsistencies for you.

"WARNING: The command completed successfully but no settings of '[user id here]' have been modified."

This warning means the setting was already set like what you want it to be. So it didn't change anything for that object.

When you need to copy a variable to the clipboard in the Chrome dev console, you can simply use the copy() command.

https://developers.google.com/web/tools/chrome-devtools/console/command-line-reference#copyobject

For this issue need to add the partition for date column values, If last partition 20201231245959, then inserting the 20210110245959 values, this issue will occurs.

For that need to add the 2021 partition into that table

ALTER TABLE TABLE_NAME ADD PARTITION PARTITION_NAME VALUES LESS THAN (TO_DATE('2021-12-31 24:59:59', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')) NOCOMPRESS

Similar to Jeff's idea (untested):

find . -name * -print0 | grep -v "exclude" | xargs -0 -I {} cp -a {} destination/

It is enough to use color property alongside with -webkit-text-fill-color this way:

    input {_x000D_
        color: red; /* color of caret */_x000D_
        -webkit-text-fill-color: black; /* color of text */_x000D_
    }

<input type="text"/>

Works in WebKit browsers (but not in iOS Safari, where is still used system color for caret) and also in Firefox.

The -webkit-text-fill-color CSS property specifies the fill color of characters of text. If this property is not set, the value of the color property is used. MDN

So this means we set text color with text-fill-color and caret color with standard color property. In unsupported browser, caret and text will have same color – color of the caret.

Using:

  SELECT t.ctn_no
    FROM YOUR_TABLE t
GROUP BY t.ctn_no
  HAVING COUNT(t.ctn_no) > 1

...will show you the ctn_no value(s) that have duplicates in your table. Adding criteria to the WHERE will allow you to further tune what duplicates there are:

  SELECT t.ctn_no
    FROM YOUR_TABLE t
   WHERE t.s_ind = 'Y'
GROUP BY t.ctn_no
  HAVING COUNT(t.ctn_no) > 1

If you want to see the other column values associated with the duplicate, you'll want to use a self join:

SELECT x.*
  FROM YOUR_TABLE x
  JOIN (SELECT t.ctn_no
          FROM YOUR_TABLE t
      GROUP BY t.ctn_no
        HAVING COUNT(t.ctn_no) > 1) y ON y.ctn_no = x.ctn_no

One of the biggest reasons that C++ doesn't have built in garbage collection is that getting garbage collection to play nice with destructors is really, really hard. As far as I know, nobody really knows how to solve it completely yet. There are alot of issues to deal with:

• deterministic lifetimes of objects (reference counting gives you this, but GC doesn't. Although it may not be that big of a deal).
• what happens if a destructor throws when the object is being garbage collected? Most languages ignore this exception, since theres really no catch block to be able to transport it to, but this is probably not an acceptable solution for C++.
• How to enable/disable it? Naturally it'd probably be a compile time decision but code that is written for GC vs code that is written for NOT GC is going to be very different and probably incompatible. How do you reconcile this?

These are just a few of the problems faced.

git-clean Use to remove untracked files in the working tree. Following are some options (in brief) that can use with git clean command.

-d use when no path is specified. So git recurse into untracked directories remove them.

-f/--force To remove nested untracked files.

-i/--interactive Show what would be done and clean files interactively.

-n/--dry-run Show what will happen without removing anything.

-x ignore files

example: git clean -f -d -> Remove all untracked files in current directory any subdirectories.

For own property :

var loan = { amount: 150 };
if(Object.prototype.hasOwnProperty.call(loan, "amount")) 
{ 
   //will execute
}

Note: using Object.prototype.hasOwnProperty is better than loan.hasOwnProperty(..), in case a custom hasOwnProperty is defined in the prototype chain (which is not the case here), like

var foo = {
      hasOwnProperty: function() {
        return false;
      },
      bar: 'Here be dragons'
    };

// https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Object/hasOwnProperty

To include inherited properties in the finding use the in operator: (but you must place an object at the right side of 'in', primitive values will throw error, e.g. 'length' in 'home' will throw error, but 'length' in new String('home') won't)

const yoshi = { skulk: true };
const hattori = { sneak: true };
const kuma = { creep: true };
if ("skulk" in yoshi) 
    console.log("Yoshi can skulk");

if (!("sneak" in yoshi)) 
    console.log("Yoshi cannot sneak");

if (!("creep" in yoshi)) 
    console.log("Yoshi cannot creep");

Object.setPrototypeOf(yoshi, hattori);

if ("sneak" in yoshi)
    console.log("Yoshi can now sneak");
if (!("creep" in hattori))
    console.log("Hattori cannot creep");

Object.setPrototypeOf(hattori, kuma);

if ("creep" in hattori)
    console.log("Hattori can now creep");
if ("creep" in yoshi)
    console.log("Yoshi can also creep");

// https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Operators/in

Note: One may be tempted to use typeof and [ ] property accessor as the following code which doesn't work always ...

var loan = { amount: 150 };

loan.installment = undefined;

if("installment" in loan) // correct
{
    // will execute
}

if(typeof loan["installment"] !== "undefined") // incorrect
{
    // will not execute
}

Function can be used within a sql statement whereas procedure cannot be used within a sql statement.

Insert, Update and Create statements cannot be included in function but a procedure can have these statements.

Procedure supports transactions but functions do not support transactions.

Function has to return one and only one value (another can be returned by OUT variable) but procedure returns as many data sets and return values.

Execution plans of both functions and procedures are cached, so the performance is same in both the cases.

break is to break out of a loop like for, while, switch etc which you don't have here, you need to use return to break the execution flow of the current function and return to the caller.

function loop() {
    if (isPlaying) {
        jet1.draw();
        drawAllEnemies();
        requestAnimFrame(loop);
        if (game == 1) {
           return
        }
    }
}

Note: This does not cover the logic behind the if condition or when to return from the method, for that we need to have more context regarding the drawAllEnemies and requestAnimFrame method as well as how game value is updated

I guess you can do this in 5 minute without any further IP/port forwarding, for presenting your local websites temporary.

All you need to do it, go to http://ngrok.com Download small tool extract and run that tool as administrator

Enter command
ngrok http 80

You will see it will connect to server and will create a temporary URL for you which you can share to your friend and let him browse localhost or any of its folder.

You can see detailed process here.
How do I access/share xampp or localhost website from another computer

The most powerful solution would be using array_filter, which allows you to define your own filtering function.

But some might say it's a bit overkill, in your situation...
A simple foreach loop to go trough the array and remove the item you don't want should be enough.

Something like this, in your case, should probably do the trick :

foreach ($items as $key => $value) {
    if ($value == $id) {
        unset($items[$key]);
        // If you know you only have one line to remove, you can decomment the next line, to stop looping
        //break;
    }
}

I suggest you to use res.download same as follow:

app.get('/download', function(req, res){
  const file = `${__dirname}/folder/abc.csv`;
  res.download(file); // Set disposition and send it.
});

Just a clarification on the answer given by Bkkbrad.

I tried this suggestion and it did not work for me.

For example,

split('aa|bb','\\|')

produced:

["","a","a","|","b","b",""]

But,

split('aa|bb','[|]')

produced the desired result:

["aa","bb"]

Including the metacharacter '|' inside the square brackets causes it to be interpreted literally, as intended, rather than as a metacharacter.

For elaboration of this behaviour of regexp, see: http://www.regular-expressions.info/charclass.html

Try this:

import math
print [value for value in x if not math.isnan(value)]

For more, read on List Comprehensions.

It refers to which filegroup the object you are creating resides on. So your Primary filegroup could reside on drive D:\ of your server. you could then create another filegroup called Indexes. This filegroup could reside on drive E:\ of your server.

Correción: 3-LEN

declare @t  TINYINT 
set @t =233
SELECT ISNULL(REPLICATE('0',3-LEN(@t)),'') + CAST(@t AS VARCHAR) 

From lodash.js.

var undefined;
function isUndefined(value) {
  return value === undefined;
}

It creates a local variable named undefined which is initialized with the default value -- the real undefined, then compares value with the variable undefined.

Update 9/9/2019

I found Lodash updated its implementation. See my issue and the code.

To be bullet-proof, simply use:

function isUndefined(value) {
  return value === void 0;
}

Create two tables one after other, put second table in a div of fixed height and set the overflow property to auto. Also keep all the td's inside thead in second table empty.

<div>
    <table>
        <thead>
            <tr>
                <th>Head 1</th>
                <th>Head 2</th>
                <th>Head 3</th>
                <th>Head 4</th>
                <th>Head 5</th>
            </tr>
        </thead>
    </table>
</div>

<div style="max-height:500px;overflow:auto;">
    <table>
        <thead>
            <tr>
                <th></th>
                <th></th>
                <th></th>
                <th></th>
                <th></th>
            </tr>
        </thead>
        <tbody>
        <tr>
            <td>Content 1</td>
            <td>Content 2</td>
            <td>Content 3</td>
            <td>Content 4</td>
            <td>Content 5</td>
        </tr>
        </tbody>
    </table>    
</div>

This should help you.

Dim Ws As Worksheet
Set Ws = Sheets("Sheet-Name")
Dim tbl As ListObject
Set tbl = Ws.ListObjects("Table-Name")
Dim newrow As ListRow
Set newrow = tbl.ListRows.Add

With newrow

        .Range(1, Ws.Range("Table-Name[Table-Column-Name]").Column) = "Your Data"

End With

OS: Windows 7

Steps which worked for me:

1. npm config get proxy

2. npm config get https-proxy

3. Comments: I executed this command to know my proxy settings
   npm config rm proxy

4. npm config rm https-proxy
5. npm config set registry=http://registry.npmjs.org/
6. npm install

calling a function is simple ..

 myFunction();

so your code will be something like..

 $(function(){
     $('#elementID').click(function(){
         myFuntion();  //this will call your function
    });
 });

  $(function(){
     $('#elementID').click( myFuntion );

 });

or with some condition

if(something){
   myFunction();  //this will call your function
}

int segundo = 0;
DateTime dt = new DateTime();

private void timer1_Tick(object sender, EventArgs e){
    segundo++;
    label1.Text = dt.AddSeconds(segundo).ToString("HH:mm:ss");
}

Here's some code I use to deal with this.

First we show the element, which will typically set the display type to "block" via .show() function, and then set the CSS rule to "visible":

jQuery( '.element' ).show().css( 'visibility', 'visible' );

Or, assuming that the class that is hiding the element is called hidden, such as in Twitter Bootstrap, toggleClass() can be useful:

jQuery( '.element' ).toggleClass( 'hidden' );

Lastly, if you want to chain functions, perhaps with fancy with a fading effect, you can do it like so:

jQuery( '.element' ).css( 'visibility', 'visible' ).fadeIn( 5000 );

Here's an example of equal-height columns - Equal Height Columns - revisited

You can also check out the idea of "Faux Columns" as well - Faux Columns

Don't go the table route. If it's not tabular data, don't treat it as such. It's bad for accessibility and flexibility.

In Apache commons lang, DateUtils class we have a method called parseDate. We can use this for parsing the date.

Also another library Joda-time also have the method to parse the date.

To get the moving average in pandas we can use cum_sum and then divide by count.

Here is the working example:

import pandas as pd
import numpy as np

df = pd.DataFrame({'id': range(5),
                   'value': range(100,600,100)})

# some other similar statistics
df['cum_sum'] = df['value'].cumsum()
df['count'] = range(1,len(df['value'])+1)
df['mov_avg'] = df['cum_sum'] / df['count']

# other statistics
df['rolling_mean2'] = df['value'].rolling(window=2).mean()

print(df)

output

   id  value  cum_sum  count  mov_avg     rolling_mean2
0   0    100      100      1    100.0           NaN
1   1    200      300      2    150.0           150.0
2   2    300      600      3    200.0           250.0
3   3    400     1000      4    250.0           350.0
4   4    500     1500      5    300.0           450.0