Please Run Visual Studio with Administrator privilege..This Issue is solved for me..

Access to the path is denied C:\inetpub\wwwroot is denied indicates that the Self Service web site can’t access a specific folder on the server where it is installed. This could be either because the location doesn’t exist, or because the Authenticating User does not have any permissions applied to Write to this location.

Running:

npm install

from inside your app directory (i.e. where package.json is located) will install the dependencies for your app, rather than install it as a module, as described here. These will be placed in ./node_modules relative to your package.json file (it's actually slightly more complex than this, so check the npm docs here).

You are free to move the node_modules dir to the parent dir of your app if you want, because node's 'require' mechanism understands this. However, if you want to update your app's dependencies with install/update, npm will not see the relocated 'node_modules' and will instead create a new dir, again relative to package.json.

To prevent this, just create a symlink to the relocated node_modules from your app dir:

ln -s ../node_modules node_modules

You may use the == operator to compare unicode objects for equality.

>>> s1 = u'Hello'
>>> s2 = unicode("Hello")
>>> type(s1), type(s2)
(<type 'unicode'>, <type 'unicode'>)
>>> s1==s2
True
>>> 
>>> s3='Hello'.decode('utf-8')
>>> type(s3)
<type 'unicode'>
>>> s1==s3
True
>>> 

But, your error message indicates that you aren't comparing unicode objects. You are probably comparing a unicode object to a str object, like so:

>>> u'Hello' == 'Hello'
True
>>> u'Hello' == '\x81\x01'
__main__:1: UnicodeWarning: Unicode equal comparison failed to convert both arguments to Unicode - interpreting them as being unequal
False

See how I have attempted to compare a unicode object against a string which does not represent a valid UTF8 encoding.

Your program, I suppose, is comparing unicode objects with str objects, and the contents of a str object is not a valid UTF8 encoding. This seems likely the result of you (the programmer) not knowing which variable holds unicide, which variable holds UTF8 and which variable holds the bytes read in from a file.

I recommend http://nedbatchelder.com/text/unipain.html, especially the advice to create a "Unicode Sandwich."

Add following to your gradle file in android section

    lintOptions {
       disable 'MissingTranslation'
    }

tl;dr

LocalDate.parse( "2011-01-01" )
         .format( DateTimeFormatter.ofPattern( "MM-dd-uuuu" ) ) 

java.time

The other Answers are now outdated. The troublesome old date-time classes such as java.util.Date, java.util.Calendar, and java.text.SimpleDateFormat are now legacy, supplanted by the java.time classes.

ISO 8601

The input string 2011-01-01 happens to comply with the ISO 8601 standard formats for date-time text. The java.time classes use these standard formats by default when parsing/generating strings. So no need to specify a formatting pattern.

LocalDate

The LocalDate class represents a date-only value without time-of-day and without time zone.

LocalDate ld = LocalDate.parse( "2011-01-01" ) ;

Generate a String in the same format by calling toString.

String output = ld.toString() ;

2011-01-01

DateTimeFormatter

To parse/generate other formats, use a DateTimeFormatter.

DateTimeFormatter f = DateTimeFormatter.ofPattern( "MM-dd-uuuu" ) ;
String output = ld.format( f ) ;

01-01-2011

About java.time

The java.time framework is built into Java 8 and later. These classes supplant the troublesome old legacy date-time classes such as java.util.Date, Calendar, & SimpleDateFormat.

The Joda-Time project, now in maintenance mode, advises migration to the java.time classes.

To learn more, see the Oracle Tutorial. And search Stack Overflow for many examples and explanations. Specification is JSR 310.

Where to obtain the java.time classes?

• Java SE 8, Java SE 9, and later
  • Built-in.
  • Part of the standard Java API with a bundled implementation.
  • Java 9 adds some minor features and fixes.
• Java SE 6 and Java SE 7
  • Much of the java.time functionality is back-ported to Java 6 & 7 in ThreeTen-Backport.
• Android
  • The ThreeTenABP project adapts ThreeTen-Backport (mentioned above) for Android specifically.
  • See How to use ThreeTenABP….

The ThreeTen-Extra project extends java.time with additional classes. This project is a proving ground for possible future additions to java.time. You may find some useful classes here such as Interval, YearWeek, YearQuarter, and more.

You can have multiple versions of GCC on your box, to select the one you want to use call it with full path, e.g. instead of g++ use full path /usr/bin/g++ on command line (depends where your gcc lives).

For compiling projects it depends what system do you use, I'm not sure about Xcode (I'm happy with default atm) but when you use Makefiles you can set GXX=/usr/bin/g++ and so on.

EDIT

There's now a xcrun script that can be queried to select appropriate version of build tools on mac. Apart from man xcrun I've googled this explanation about xcode and command line tools which pretty much summarizes how to use it.

Short answer: DEPENDS.... In this particular case, it might be fine. However, experts will recommend against it just about every time; including your case.

Why?

Keys are seldomly unique in tables when they are foreign (originated in another table) to the table in question. For example, an item ID might be unique in an ITEMS table, but not in an ORDERS table, since the same type of item will most likely exist in another order. Likewise, order IDs might be unique (might) in the ORDERS table, but not in some other table like ORDER_DETAILS where an order with multiple line items can exist and to query against a particular item in a particular order, you need the concatenation of two FK (order_id and item_id) as the PK for this table.

I am not DB expert, but if you can justify logically to have an auto-generated value as your PK, I would do that. If this is not practical, then a concatenation of two (or maybe more) FK could serve as your PK. BUT, I cannot think of any case where a single FK value can be justified as the PK.

Please bear in mind that the formatting of the date is independent of the storage. If it's essential to you that the date is stored in that format you will need to either define a custom data type or store it as a string. Then you can use a combination of extract, typecasting and concatenation to get that format.

However, I suspect that you want to store a date and get the format on output. So, something like this will do the trick for you:

    CREATE TABLE my_table
    (
    id serial PRIMARY KEY not null,
    my_date date not null default CURRENT_DATE
    );

(CURRENT_DATE is basically a synonym for now() and a cast to date).

(Edited to use to_char).

Then you can get your output like:

SELECT id, to_char(my_date, 'yyyymm') FROM my_table;

Now, if you did really need to store that field as a string and ensure the format you could always do:

CREATE TABLE my_other_table
(
id serial PRIMARY KEY not null,
my_date varchar(6) default to_char(CURRENT_DATE, 'yyyymm')
);

This is not possible, for the sake of keeping Redis simple.

Quoth Antirez, creator of Redis:

Hi, it is not possible, either use a different top-level key for that specific field, or store along with the filed another field with an expire time, fetch both, and let the application understand if it is still valid or not based on current time.

If you're just comparing two files to see which is newer then -C should work:

if (-C "file1.txt" > -C "file2.txt") {
{
    /* Update */
}

There's also -M, but I don't think it's what you want. Luckily, it's almost impossible to search for documentation on these file operators via Google.

var result = string.Join("", input.Select(c => ((int)c).ToString("X2")));

OR

var result  =string.Join("", 
                input.Select(c=> String.Format("{0:X2}", Convert.ToInt32(c))));

According to the docs, #Rails.env wraps RAILS_ENV:

    # File vendor/rails/railties/lib/initializer.rb, line 55
     def env
       @_env ||= ActiveSupport::StringInquirer.new(RAILS_ENV)
     end

But, look at specifically how it's wrapped, using ActiveSupport::StringInquirer:

Wrapping a string in this class gives you a prettier way to test for equality. The value returned by Rails.env is wrapped in a StringInquirer object so instead of calling this:

Rails.env == "production"

you can call this:

Rails.env.production?

So they aren't exactly equivalent, but they're fairly close. I haven't used Rails much yet, but I'd say #Rails.env is certainly the more visually attractive option due to using StringInquirer.

With an HTML form like:

<input type="submit" name="btnSubmit" value="Save Changes" />
<input type="submit" name="btnDelete" value="Delete" />

The PHP code to use would look like:

if ($_SERVER['REQUEST_METHOD'] === 'POST') {
    // Something posted

    if (isset($_POST['btnDelete'])) {
        // btnDelete
    } else {
        // Assume btnSubmit
    }
}

You should always assume or default to the first submit button to appear in the form HTML source code. In practice, the various browsers reliably send the name/value of a submit button with the post data when:

1. The user literally clicks the submit button with the mouse or pointing device
2. Or there is focus on the submit button (they tabbed to it), and then the Enter key is pressed.

Other ways to submit a form exist, and some browsers/versions decide not to send the name/value of any submit buttons in some of these situations. For example, many users submit forms by pressing the Enter key when the cursor/focus is on a text field. Forms can also be submitted via JavaScript, as well as some more obscure methods.

It's important to pay attention to this detail, otherwise you can really frustrate your users when they submit a form, yet "nothing happens" and their data is lost, because your code failed to detect a form submission, because you did not anticipate the fact that the name/value of a submit button may not be sent with the post data.

Also, the above advice should be used for forms with a single submit button too because you should always assume a default submit button.

I'm aware that the Internet is filled with tons of form-handler tutorials, and almost of all them do nothing more than check for the name and value of a submit button. But, they're just plain wrong!

For gentoo, it's in the main repository: emerge --ask scipy

One option is to use do.call():

 > do.call(rbind, a)
      [,1] [,2] [,3] [,4] [,5] [,6]
 [1,]    1    1    2    3    4    5
 [2,]    2    1    2    3    4    5
 [3,]    3    1    2    3    4    5
 [4,]    4    1    2    3    4    5
 [5,]    5    1    2    3    4    5
 [6,]    6    1    2    3    4    5
 [7,]    7    1    2    3    4    5
 [8,]    8    1    2    3    4    5
 [9,]    9    1    2    3    4    5
[10,]   10    1    2    3    4    5

I see it is an old thread but I had the same error.

I found the explanation here: http://developer.android.com/reference/android/database/sqlite/SQLiteDatabase.html

void execSQL(String sql)
Execute a single SQL statement that is NOT a SELECT or any other SQL statement that returns data.

void execSQL(String sql, Object[] bindArgs)
Execute a single SQL statement that is NOT a SELECT/INSERT/UPDATE/DELETE.

We use a.b.c.d where

• a - major (incremented on delivery to client)
• b - minor (incremented on delivery to client)
• c - revision (incremented on internal releases)
• d - build (incremented by cruise control)

The following are not needed as they they not fix the error:

1. ps -ef|grep oracle
2. Find the smon and kill the pid for it
3. SQL> startup mount
4. SQL> create pfile from spfile;

Restarting the database will flush your pool and that solves a effect not the problem.

Fixate your large_pool so it can not go lower then a certain point or add memory and set a higher max memory.

Too many comments to make to different answers, so I'll leave another answer here.

You can and should use reinterpret_cast<>, in your case

str.append(reinterpret_cast<const char*>(foo()));

because, while these two are different types, the 2014 standard, chapter 3.9.1 Fundamental types [basic.fundamental] says there is a relationship between them:

Plain char, signed char and unsigned char are three distinct types, collectively called narrow character types. A char, a signed char, and an unsigned char occupy the same amount of storage and have the same alignment requirements (3.11); that is, they have the same object representation.

(selection is mine)

Here's an available link: https://en.cppreference.com/w/cpp/language/types#Character_types

Using wchar_t for Unicode/multibyte strings is outdated: Should I use wchar_t when using UTF-8?

C++17 inline variables

If you Googled "C++ const static", then this is very likely what you really want to use are C++17 inline variables.

This awesome C++17 feature allow us to:

• conveniently use just a single memory address for each constant
• store it as a constexpr: How to declare constexpr extern?
• do it in a single line from one header

main.cpp

#include <cassert>

#include "notmain.hpp"

int main() {
    // Both files see the same memory address.
    assert(&notmain_i == notmain_func());
    assert(notmain_i == 42);
}

notmain.hpp

#ifndef NOTMAIN_HPP
#define NOTMAIN_HPP

inline constexpr int notmain_i = 42;

const int* notmain_func();

#endif

notmain.cpp

#include "notmain.hpp"

const int* notmain_func() {
    return &notmain_i;
}

Compile and run:

g++ -c -o notmain.o -std=c++17 -Wall -Wextra -pedantic notmain.cpp
g++ -c -o main.o -std=c++17 -Wall -Wextra -pedantic main.cpp
g++ -o main -std=c++17 -Wall -Wextra -pedantic main.o notmain.o
./main

GitHub upstream.

See also: How do inline variables work?

C++ standard on inline variables

The C++ standard guarantees that the addresses will be the same. C++17 N4659 standard draft 10.1.6 "The inline specifier":

6 An inline function or variable with external linkage shall have the same address in all translation units.

cppreference https://en.cppreference.com/w/cpp/language/inline explains that if static is not given, then it has external linkage.

GCC inline variable implementation

We can observe how it is implemented with:

nm main.o notmain.o

which contains:

main.o:
                 U _GLOBAL_OFFSET_TABLE_
                 U _Z12notmain_funcv
0000000000000028 r _ZZ4mainE19__PRETTY_FUNCTION__
                 U __assert_fail
0000000000000000 T main
0000000000000000 u notmain_i

notmain.o:
0000000000000000 T _Z12notmain_funcv
0000000000000000 u notmain_i

and man nm says about u:

"u" The symbol is a unique global symbol. This is a GNU extension to the standard set of ELF symbol bindings. For such a symbol the dynamic linker will make sure that in the entire process there is just one symbol with this name and type in use.

so we see that there is a dedicated ELF extension for this.

Pre-C++ 17: extern const

Before C++ 17, and in C, we can achieve a very similar effect with an extern const, which will lead to a single memory location being used.

The downsides over inline are:

• it is not possible to make the variable constexpr with this technique, only inline allows that: How to declare constexpr extern?
• it is less elegant as you have to declare and define the variable separately in the header and cpp file

main.cpp

#include <cassert>

#include "notmain.hpp"

int main() {
    // Both files see the same memory address.
    assert(&notmain_i == notmain_func());
    assert(notmain_i == 42);
}

notmain.cpp

#include "notmain.hpp"

const int notmain_i = 42;

const int* notmain_func() {
    return &notmain_i;
}

notmain.hpp

#ifndef NOTMAIN_HPP
#define NOTMAIN_HPP

extern const int notmain_i;

const int* notmain_func();

#endif

GitHub upstream.

Pre-C++17 header only alternatives

These are not as good as the extern solution, but they work and only take up a single memory location:

A constexpr function, because constexpr implies inline and inline allows (forces) the definition to appear on every translation unit:

constexpr int shared_inline_constexpr() { return 42; }

and I bet that any decent compiler will inline the call.

You can also use a const or constexpr static variable as in:

#include <iostream>

struct MyClass {
    static constexpr int i = 42;
};

int main() {
    std::cout << MyClass::i << std::endl;
    // undefined reference to `MyClass::i'
    //std::cout << &MyClass::i << std::endl;
}

but you can't do things like taking its address, or else it becomes odr-used, see also: Defining constexpr static data members

C

In C the situation is the same as C++ pre C++ 17, I've uploaded an example at: What does "static" mean in C?

The only difference is that in C++, const implies static for globals, but it does not in C: C++ semantics of `static const` vs `const`

Any way to fully inline it?

TODO: is there any way to fully inline the variable, without using any memory at all?

Much like what the preprocessor does.

This would require somehow:

• forbidding or detecting if the address of the variable is taken
• add that information to the ELF object files, and let LTO optimize it up

Related:

• C++11 enum with class members and constexpr link-time optimization

Tested in Ubuntu 18.10, GCC 8.2.0.

I couldn't get any of the commands on this page to work for me: the sed solution added a newline to the end of all the files it processed, and the perl solution was unable to accept enough arguments from find. I found this solution which works perfectly:

find . -type f -name '*.[hm]' -print0 
    | xargs -0 perl -pi -e 's/search_regex/replacement_string/g'

This will recurse down the current directory tree and replace search_regex with replacement_string in any files ending in .h or .m.

I have also used rpl for this purpose in the past.

In Eclipse Kepler it is very easy to generate Web Service Client classes,You can achieve this by following steps .

RightClick on any Project->Create New Other ->Web Services->Web Service Client->Then paste the wsdl url(or location) in Service Definition->Next->Finish

You will see the generated classes are inside your src folder.

NOTE :Without eclipse also you can generate client classes from wsdl file by using wsimport command utility which ships with JDK.

refer this link Create Web service client using wsdl

I did a test on MS SQL 2005 using the following tables: A 400K rows, B 26K rows and C 450 rows.

The estimated query plan indicated that the basic inner join would be 3 times slower than the nested sub-queries, however when actually running the query, the basic inner join was twice as fast as the nested queries, The basic inner join took 297ms on very minimal server hardware.

What database are you using, and what times are you seeing? I'm thinking if you are seeing poor performance then it is probably an index problem.

A CASE statement is an expression, just like a boolean comparison. That means the 'AND' needs to go before the 'CASE' statement, not within it.:

Select * From Times
WHERE (StartDate <= @Date) AND (EndDate >= @Date)

AND -- Added the "AND" here

CASE WHEN @day = 'Monday' THEN (Monday = 1)   -- Removed "AND" 
    WHEN @day = 'Tuesday' THEN (Tuesday = 1)  -- Removed "AND" 
    ELSE AND (Wednesday = 1) 
END

The answer of Pardeep Jain can be useful for static data, but what if we have an array in JSON?

For example, we have i values and get the value of id field

alert(obj[i].id); //works!

But what if we need key with spaces?

In this case, the following construction can help (without point between [] blocks):

alert(obj[i]["No. of interfaces"]); //works too!

Console.Write("\b \b"); will delete the asterisk character from the screen, but you do not have any code within your else block that removes the previously entered character from your pass string variable.

Here's the relevant working code that should do what you require:

var pass = string.Empty;
ConsoleKey key;
do
{
    var keyInfo = Console.ReadKey(intercept: true);
    key = keyInfo.Key;

    if (key == ConsoleKey.Backspace && pass.Length > 0)
    {
        Console.Write("\b \b");
        pass = pass[0..^1];
    }
    else if (!char.IsControl(keyInfo.KeyChar))
    {
        Console.Write("*");
        pass += keyInfo.KeyChar;
    }
} while (key != ConsoleKey.Enter);

More easy and without addition modules

Math.random().toString(26).slice(2)

jsoup supports java 1.5

https://github.com/tburch/jsoup/commit/d8ea84f46e009a7f144ee414a9fa73ea187019a3

looks like that stack was a bug, and has been fixed

My Swift 4 version of shouldChangeCharactersIn

func textField(_ textField: UITextField, shouldChangeCharactersIn range: NSRange,
               replacementString string: String) -> Bool {

        guard let preText = textField.text as NSString?,
            preText.replacingCharacters(in: range, with: string).count <= MAX_TEXT_LENGTH else {
            return false
        }

        return true
    }

Try using setInterval and include jquery library and just try removing unwrap()

<script src="http://code.jquery.com/jquery-latest.min.js" type="text/javascript"></script>
<script language="javascript" type="text/javascript">

var timeout = setInterval(reloadChat, 5000);    
function reloadChat () {

     $('#links').load('test.php');
}
</script>

UPDATE

you are using a jquery old version so include the latest jquery version

<script src="http://code.jquery.com/jquery-latest.min.js" type="text/javascript"></script>

In oracle db there is a trick for casting int to float (I suppose, it should also work in mysql):

select myintfield + 0.0 as myfloatfield from mytable

While @Heximal's answer works, I don't personally recommend it.

This is because it uses implicit casting. Although you didn't type CAST, either the SUM() or the 0.0 need to be cast to be the same data-types, before the + can happen. In this case the order of precedence is in your favour, and you get a float on both sides, and a float as a result of the +. But SUM(aFloatField) + 0 does not yield an INT, because the 0 is being implicitly cast to a FLOAT.

I find that in most programming cases, it is much preferable to be explicit. Don't leave things to chance, confusion, or interpretation.

If you want to be explicit, I would use the following.

CAST(SUM(sl.parts) AS FLOAT) * cp.price
-- using MySQL CAST FLOAT  requires 8.0

You can try the following to see what happens...

CAST(SUM(sl.parts) AS NUMERIC(10,4)) * CAST(cp.price AS NUMERIC(10,4))

To read a specific set of columns from a dataset you, there are several other options:

1) With freadfrom the data.table-package:

You can specify the desired columns with the select parameter from fread from the data.table package. You can specify the columns with a vector of column names or column numbers.

For the example dataset:

library(data.table)
dat <- fread("data.txt", select = c("Year","Jan","Feb","Mar","Apr","May","Jun"))
dat <- fread("data.txt", select = c(1:7))

Alternatively, you can use the drop parameter to indicate which columns should not be read:

dat <- fread("data.txt", drop = c("Jul","Aug","Sep","Oct","Nov","Dec"))
dat <- fread("data.txt", drop = c(8:13))

All result in:

> data
  Year Jan Feb Mar Apr May Jun
1 2009 -41 -27 -25 -31 -31 -39
2 2010 -41 -27 -25 -31 -31 -39
3 2011 -21 -27  -2  -6 -10 -32

UPDATE: When you don't want fread to return a data.table, use the data.table = FALSE-parameter, e.g.: fread("data.txt", select = c(1:7), data.table = FALSE)

2) With read.csv.sql from the sqldf-package:

Another alternative is the read.csv.sql function from the sqldf package:

library(sqldf)
dat <- read.csv.sql("data.txt",
                    sql = "select Year,Jan,Feb,Mar,Apr,May,Jun from file",
                    sep = "\t")

3) With the read_*-functions from the readr-package:

library(readr)
dat <- read_table("data.txt",
                  col_types = cols_only(Year = 'i', Jan = 'i', Feb = 'i', Mar = 'i',
                                        Apr = 'i', May = 'i', Jun = 'i'))
dat <- read_table("data.txt",
                  col_types = list(Jul = col_skip(), Aug = col_skip(), Sep = col_skip(),
                                   Oct = col_skip(), Nov = col_skip(), Dec = col_skip()))
dat <- read_table("data.txt", col_types = 'iiiiiii______')

From the documentation an explanation for the used characters with col_types:

each character represents one column: c = character, i = integer, n = number, d = double, l = logical, D = date, T = date time, t = time, ? = guess, or _/- to skip the column

datetime.datetime.strptime has problems with timezone parsing. Have a look at the dateutil package:

>>> from dateutil import parser
>>> parser.parse("Tue May 08 15:14:45 +0800 2012")
datetime.datetime(2012, 5, 8, 15, 14, 45, tzinfo=tzoffset(None, 28800))

One important point that is alluded to but not directly addressed is the difference between "precision" and "scale" and how they are used in the two statements. "precision" is the total number of significant digits in a number. "scale" is the number of digits to the right of the decimal point.

The MathContext constructor only accepts precision and RoundingMode as arguments, and therefore scale is never specified in the first statement.

setScale() obviously accepts scale as an argument, as well as RoundingMode, however precision is never specified in the second statement.

If you move the decimal point one place to the right, the difference will become clear:

// 1.
new BigDecimal("35.3456").round(new MathContext(4, RoundingMode.HALF_UP));
//result = 35.35
// 2.
new BigDecimal("35.3456").setScale(4, RoundingMode.HALF_UP);
// result = 35.3456

Send a ajax request to your server like this in your js and get your result in success function.

jQuery.ajax({
            url: "/rest/abc",
            type: "GET",

            contentType: 'application/json; charset=utf-8',
            success: function(resultData) {
                //here is your json.
                  // process it

            },
            error : function(jqXHR, textStatus, errorThrown) {
            },

            timeout: 120000,
        });

at server side send response as json type.

And you can use jQuery.getJSON for your application.

I found the best solution was to use the base tag. Add the following to the head of the page in the iframe:

<base target="_parent">

This will load all links on the page in the parent window. If you want your links to load in a new window, use:

<base target="_blank">

Browser Support

You could add your IEnumerable range to a list then set the ICollection = to the list.

        IEnumerable<T> source;

        List<item> list = new List<item>();
        list.AddRange(source);

        ICollection<item> destination = list;

Or try to check your mainActivity.xml you make sure that this one
xmlns:app="http://schemas.android.com/apk/res-auto"hereis included

You can use:

SELECT SUBDATE(NOW(), 1);

or

SELECT SUBDATE(NOW(), INTERVAL 1 DAY);

or

SELECT NOW() - INTERVAL 1 DAY;

or

SELECT DATE_SUB(NOW(), INTERVAL 1 DAY);

I had this problem, and the reason is very simple, I have a duplicated IP address to ssh login, so after modify this problem, everthing is solved.

This should work for you without changing program logic (by not outputting "Start error" on the top of each file) like the other answers do :) Remember to add exception handling code.

Dim filePath As String = String.Format("C:\ErrorLog_{0}.txt", DateTime.Today.ToString("dd-MMM-yyyy"))

Dim fileExists As Boolean = File.Exists(filePath)

Using writer As New StreamWriter(filePath, True)
    If Not fileExists Then
        writer.WriteLine("Start Error Log for today")
    End If
    writer.WriteLine("Error Message in  Occured at-- " & DateTime.Now)
End Using

I would like to compliment Ram Narasimhans answer with some tips I found on an Excel blog

Non-uniformly distributed data can be plotted in excel in

• X Y (Scatter Plots)
• Linear plots with Date axis
  • These don't take time into account, only days.
  • This method is quite cumbersome as it requires translating your time units to days, months, or years.. then change the axis labels... Not Recommended

Just like Ram Narasimhan suggested, to have the points centered you will want the mid point but you don't need to move to a numeric format, you can stay in the time format.

1- Add the center point to your data series

+---------------+-------+------+
|    Time       | Time  | Freq |
+---------------+-------+------+
| 08:00 - 09:00 | 08:30 |  12  |
| 09:00 - 10:00 | 09:30 |  13  |
| 10:00 - 11:00 | 10:30 |  10  |
| 13:00 - 14:00 | 13:30 |   5  |
| 14:00 - 15:00 | 14:30 |  14  |
+---------------+-------+------+

2- Create a Scatter Plot

3- Excel allows you to specify time values for the axis options. Time values are a parts per 1 of a 24-hour day. Therefore if we want to 08:00 to 15:00, then we Set the Axis options to:

• Minimum : Fix : 0.33333
• Maximum : Fix : 0.625
• Major unit : Fix : 0.041667

Alternative Display:

Make the points turn into columns:

To be able to represent these points as bars instead of just point we need to draw disjoint lines. Here is a way to go about getting this type of chart.

1- You're going to need to add several rows where we draw the line and disjoint the data

+-------+------+
| Time  | Freq |
+-------+------+
| 08:30 |   0  |
| 08:30 |  12  |
|       |      |
| 09:30 |   0  |
| 09:30 |  13  |
|       |      |
| 10:30 |   0  |
| 10:30 |  10  |
|       |      |
| 13:30 |   0  |
| 13:30 |   5  |
|       |      |
| 14:30 |   0  |
| 14:30 |  14  |
+-------+------+

2- Plot an X Y (Scatter) Chart with Lines.

3- Now you can tweak the data series to have a fatter line, no markers, etc.. to get a bar/column type chart with non-uniformly distributed data.

Using the answer of @Slauma i have made a code snippet (a surrounds with snippet) for better use.

<?xml version="1.0" encoding="utf-8"?>
<CodeSnippets xmlns="http://schemas.microsoft.com/VisualStudio/2005/CodeSnippet">
  <CodeSnippet Format="1.0.0">
    <Header>
      <SnippetTypes>
        <SnippetType>SurroundsWith</SnippetType>
      </SnippetTypes>
      <Title>ValidationErrorsTryCatch</Title>
      <Author>Phoenix</Author>
      <Description>
      </Description>
      <HelpUrl>
      </HelpUrl>
      <Shortcut>
      </Shortcut>
    </Header>
    <Snippet>
      <Code Language="csharp"><![CDATA[try
{
    $selected$ $end$
}
catch (System.Data.Entity.Validation.DbEntityValidationException e)
{
    foreach (var eve in e.EntityValidationErrors)
    {
        Console.WriteLine("Entity of type \"{0}\" in state \"{1}\" has the following validation errors:",
            eve.Entry.Entity.GetType().Name, eve.Entry.State);
        foreach (var ve in eve.ValidationErrors)
        {
            Console.WriteLine("- Property: \"{0}\", Error: \"{1}\"",
                ve.PropertyName, ve.ErrorMessage);
        }
    }
    throw;
}]]></Code>
    </Snippet>
  </CodeSnippet>
</CodeSnippets>

Hit this error trying to run terraform/terragrunt (Single go binary).

Using which terragrunt to find where executable was, got strange error when running it in local dir or with full path

bash: ./terragrunt: No such file or directory

Problem was that there was two installations of terragrunt, used brew uninstall terragrunt to remove one fixed it.

After removing the one, which terragrunt showed the new path /usr/bin/terragrunt everything worked fine.

You can get just the edition name by using the following steps.

• Open "SQL Server Configuration Manager"
• From the List of SQL Server Services, Right Click on "SQL Server (Instance_name)" and Select Properties.
• Select "Advanced" Tab from the Properties window.
• Verify Edition Name from the "Stock Keeping Unit Name"
• Verify Edition Id from the "Stock Keeping Unit Id"
• Verify Service Pack from the "Service Pack Level"
• Verify Version from the "Version"

screen shot

Restrict the dimension of the NVARCHAR to 7, supplied to CONVERT to show only "YYYY-MM"

SELECT CONVERT(NVARCHAR(7),PaymentDate,120) [Month], SUM(Amount) [TotalAmount]
FROM Payments
GROUP BY CONVERT(NVARCHAR(7),PaymentDate,120)
ORDER BY [Month]

You can use either the splice() method or the delete operator.

The main difference is that when you delete an array element using the delete operator, the length of the array is not affected, even if you delete the last element of the array. On the other hand, the splice() method shifts all the elements such that no holes remain in the place of the deleted element.

Example using the delete operator:

var trees = ["redwood", "bay", "cedar", "oak", "maple"];  
delete trees[3];  
if (3 in trees) {  
   // this does not get executed  
}
console.log(trees.length);  //  5
console.log(trees);         //  ["redwood", "bay", "cedar", undefined, "maple"]

Example using the splice() method:

var trees = ["redwood", "bay", "cedar", "oak", "maple"];  
trees.splice(3, 1);
console.log(trees.length);  //  4
console.log(trees);         //  ["redwood", "bay", "cedar", "maple"]

$this->validate($request,[
        'input_field_name'=>'digits_between:2,5',
       ]);

Try this it will be work

I've tried many times.

And at last I just put autoindex on; in http but outside of server, and it's OK.

Node.js is an open source command line tool built for the server side JavaScript code.

Node.js is a platform built on Chrome's JavaScript runtime for easily building fast, scalable network applications.

Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient, perfect for data-intensive real-time applications that run across distributed devices.

The basic philosophy of node.js is:

Non-blocking I/O - every I/O call must take a callback, whether it is to retrieve information from disk, network or another process. Built-in support for the most important protocols (HTTP, DNS, TLS) Low-level. Do not remove functionality present at the POSIX layer. For example, support half-closed TCP connections. Stream everything; never force the buffering of data.

Credit - Simple Overview About Node.js

READ AT LEAST THE FIRST PARA HERE!

I know this is 3 years too late, but Matt's (accepted) answer is incomplete and will eventually get you into trouble. The key here is that, if you choose to use multipart/form-data, the boundary must not appear in the file data that the server eventually receives.

This is not a problem for application/x-www-form-urlencoded, because there is no boundary. x-www-form-urlencoded can also always handle binary data, by the simple expedient of turning one arbitrary byte into three 7BIT bytes. Inefficient, but it works (and note that the comment about not being able to send filenames as well as binary data is incorrect; you just send it as another key/value pair).

The problem with multipart/form-data is that the boundary separator must not be present in the file data (see RFC 2388; section 5.2 also includes a rather lame excuse for not having a proper aggregate MIME type that avoids this problem).

So, at first sight, multipart/form-data is of no value whatsoever in any file upload, binary or otherwise. If you don't choose your boundary correctly, then you will eventually have a problem, whether you're sending plain text or raw binary - the server will find a boundary in the wrong place, and your file will be truncated, or the POST will fail.

The key is to choose an encoding and a boundary such that your selected boundary characters cannot appear in the encoded output. One simple solution is to use base64 (do not use raw binary). In base64 3 arbitrary bytes are encoded into four 7-bit characters, where the output character set is [A-Za-z0-9+/=] (i.e. alphanumerics, '+', '/' or '='). = is a special case, and may only appear at the end of the encoded output, as a single = or a double ==. Now, choose your boundary as a 7-bit ASCII string which cannot appear in base64 output. Many choices you see on the net fail this test - the MDN forms docs, for example, use "blob" as a boundary when sending binary data - not good. However, something like "!blob!" will never appear in base64 output.

To do this, I use a custom filter.

In my app:

myApp.filter('rawHtml', ['$sce', function($sce){
  return function(val) {
    return $sce.trustAsHtml(val);
  };
}]);

Then, in the view:

<h1>{{ stuff.title}}</h1>

<div ng-bind-html="stuff.content | rawHtml"></div>

Why the prohibition "I don't want to use any looping"? That's the most obvious solution. When given the chance to be obvious, take it!

Note that calls like arr.Contains(...) are still going to loop, it just won't be you who has written the loop.

Have you considered an alternate representation that's more amenable to searching?

• A good Set implementation would perform well. (HashSet, TreeSet or the local equivalent).
• If you can be sure that arr is sorted, you could use binary search (which would need to recurse or loop, but not as often as a straight linear search).

I agree that in most cases the if (!(x instanceof Y)) {...} is the best approach, but in some cases creating an isY(x) function so you can if (!isY(x)) {...} is worthwhile.

I'm a typescript novice, and I've bumped into this S/O question a bunch of times over the last few weeks, so for the googlers the typescript way to do this is to create a typeguard like this:

typeGuards.ts

export function isHTMLInputElement (value: any): value is HTMLInputElement {
  return value instanceof HTMLInputElement
}

usage

if (!isHTMLInputElement(x)) throw new RangeError()
// do something with an HTMLInputElement

I guess the only reason why this might be appropriate in typescript and not regular js is that typeguards are a common convention, so if you're writing them for other interfaces, it's reasonable / understandable / natural to write them for classes too.

There's more detail about user defined type guards like this in the docs

You can indeed run multiple animations simultaneously, but your example has two problems. First, the syntax you use only specifies one animation. The second style rule hides the first. You can specify two animations using syntax like this:

-webkit-animation-name: spin, scale
-webkit-animation-duration: 2s, 4s

as in this fiddle (where I replaced "scale" with "fade" due to the other problem explained below... Bear with me.): http://jsfiddle.net/rwaldin/fwk5bqt6/

Second, both of your animations alter the same CSS property (transform) of the same DOM element. I don't believe you can do that. You can specify two animations on different elements, the image and a container element perhaps. Just apply one of the animations to the container, as in this fiddle: http://jsfiddle.net/rwaldin/fwk5bqt6/2/

The CP1 means 'Code Page 1' - technically this translates to code page 1252

Core dependencies for tag library:

> <dependency>
        <groupId>org.springframework.security</groupId>
        <artifactId>spring-security-taglibs</artifactId>
</dependency>
<dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-security</artifactId>
</dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-data-rest</artifactId>
</dependency>

Iterate over dictionary (i) will return the key, then using it (i) to get the value

for i in D:
    print "key: %s, value: %s" % (i, D[i])

I have a solution: 1. Using this.value to get the current editing value in the editing row. 2. Save the cell value to a hidden field when the cell lost its focus. 3. Read the hidden field when you need.

The code:

 colModel="[
       { name: 'Net', index: 'Net', editable:true, editoptions: { dataEvents: [ { type: 'focusout', fn: function(e) {$('#HiddenNet').val(this.value);} }] }, editrules:{custom:true,}},
       { name: 'Tax', index: 'Tax', editable:true, editoptions: { dataEvents: [ { type: 'focus', fn: function(e) {this.value=$('#HiddenNet').val(); } }] }, editrules:{custom:true}}
    ]" 

Good Luck

You can simply write

Worksheets.Copy

in lieu of running a cycle. By default the worksheet collection is reproduced in a new workbook.

It is proven to function in 2010 version of XL.

Check out: http://commons.apache.org/io/

It has copy, and as stated the JDK already has move.

Don't implement your own copy method. There are so many floating out there...

• The main entry point of the HttpClient API is the HttpClient interface.
• The most essential function of HttpClient is to execute HTTP methods.
• Execution of an HTTP method involves one or several HTTP request / HTTP response exchanges, usually handled internally by HttpClient.

• CloseableHttpClient is an abstract class which is the base implementation of HttpClient that also implements java.io.Closeable.

• Here is an example of request execution process in its simplest form:

  CloseableHttpClient httpclient = HttpClients.createDefault();
  HttpGet httpget = new HttpGet("http://localhost/");
  CloseableHttpResponse response = httpclient.execute(httpget);
  try {
      //do something
  } finally {
      response.close();
  }

• HttpClient resource deallocation: When an instance CloseableHttpClient is no longer needed and is about to go out of scope the connection manager associated with it must be shut down by calling the CloseableHttpClient#close() method.

  CloseableHttpClient httpclient = HttpClients.createDefault();
  try {
      //do something
  } finally {
      httpclient.close();
  }

see the Reference to learn fundamentals.

@Scadge Since Java 7, Use of try-with-resources statement ensures that each resource is closed at the end of the statement. It can be used both for the client and for each response

try(CloseableHttpClient httpclient = HttpClients.createDefault()){

    // e.g. do this many times
    try (CloseableHttpResponse response = httpclient.execute(httpget)) {
    //do something
    }

    //do something else with httpclient here
}

Since .Net >= 5.0 the best way is to use Any:

if(!array.Any()) {
   //now you sure it's empty
}

For nullable arrays:

if(!(array?.Any() == true)) {
   //now you sure it's null or empty
}

You can probably start a Service here if you want your Application to run in Background. This is what Service in Android are used for - running in background and doing longtime operations.

UDPATE

You can use START_STICKY to make your Service running continuously.

@Override
public int onStartCommand(Intent intent, int flags, int startId) {
    handleCommand(intent);
    // We want this service to continue running until it is explicitly
    // stopped, so return sticky.
    return START_STICKY;
}

In the POSIX standard, which /bin/sh is supposed to respect, the command is . (a single dot), not source. The source command is a csh-ism that has been pulled into bash.

Try

. $env_name/bin/activate

Or if you must have non-POSIX bash-isms in your code, use #!/bin/bash.

If you want to know if list element at index i is set or not, you can simply check the following:

if len(l)<=i:
    print ("empty")

If you are looking for something like what is a NULL-Pointer or a NULL-Reference in other languages, Python offers you None. That is you can write:

l[0] = None # here, list element at index 0 has to be set already
l.append(None) # here the list can be empty before
# checking
if l[i] == None:
    print ("list has actually an element at position i, which is None")

This works:

async function IsLoggedIn(): Promise<boolean> {
  try {
    await new Promise((resolve, reject) =>
      app.auth().onAuthStateChanged(
        user => {
          if (user) {
            // User is signed in.
            resolve(user)
          } else {
            // No user is signed in.
            reject('no user logged in')
          }
        },
        // Prevent console error
        error => reject(error)
      )
    )
    return true
  } catch (error) {
    return false
  }
}

Use ViewBag

ViewBag.MyString = "some string";
return View();

In your View

<h1>@ViewBag.MyString</h1>

I know this does not answer your question (it has already been answered), but the title of your question is very vast and can bring any person on this page who is searching for a query for passing a simple string to View from Controller.

if you don't want to install homebrew (or any other package manager) just for installing maven, you can grab the binary from their site:

http://maven.apache.org/download.cgi

extract the content to a folder (e.g. /Applications/apache-maven-3.1.1) with

$ tar -xvf apache-maven-3.1.1-bin.tar.gz

and finally adjust your ~/.bash_profile with any texteditor you like to include

export M2_HOME=/Applications/apache-maven-3.1.1
export PATH=$PATH:$M2_HOME/bin

restart the terminal and test it with

$ mvn -version

Apache Maven 3.1.1 (0728685237757ffbf44136acec0402957f723d9a; 2013-09-17 17:22:22+0200)
Maven home: /Applications/apache-maven-3.1.1
Java version: 1.6.0_65, vendor: Apple Inc.
Java home: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
Default locale: de_DE, platform encoding: MacRoman
OS name: "mac os x", version: "10.9", arch: "x86_64", family: "mac"

The is a simple and faster way to solve the problem.

You don't need to open a services or write any cmd code just follow my steps:

1. from XAMPP control panel click Explorer button

2. from directory find mysql_stop.bat file and run it.

Thats all!! super easy.

Refresh your netstat list, you will see that it has gone.

please make it as best answer.

I went with a modification of @user1097431 's answer:

function menuPosition(){
// distance from top of footer to top of document
var footertotop = ($('.footer').position().top);
// distance user has scrolled from top, adjusted to take in height of bar (42 pixels inc. padding)
var scrolltop = $(document).scrollTop() + window.innerHeight;
// difference between the two
var difference = scrolltop-footertotop;

// if user has scrolled further than footer,
// pull sidebar up using a negative margin
if (scrolltop > footertotop) {
    $('#categories-wrapper').css({
       'bottom' : difference
   });
}else{
    $('#categories-wrapper').css({
       'bottom' : 0
   });
 };
};

This line:

eventCustom.DateTimeEnd = dateTimeEndResult = true ? (DateTime?)null : dateTimeEndResult;

is same as:

eventCustom.DateTimeEnd = dateTimeEndResult = (true ? (DateTime?)null : dateTimeEndResult);

because the conditional operator ? has a higher precedence than the assignment operator =. That's why you always get null for eventCustom.DateTimeEnd. (MSDN Ref)

You said :

Maybe my data.frame is not in a good format?

Yes this is true. Your data is in the wide format You need to put it in the long format. Generally speaking, long format is better for variables comparison.

Using reshape2 for example , you do this using melt:

dat.m <- melt(dat,id.vars = "Rank") ## just melt(dat) should work

Then you get your barplot:

ggplot(dat.m, aes(x = Rank, y = value,fill=variable)) +
    geom_bar(stat='identity')

But using lattice and barchart smart formula notation , you don't need to reshape your data , just do this:

barchart(F1+F2+F3~Rank,data=dat)

I had trouble with the accepted answer (because I missed the HorizontalAlignment=Stretch portion and have adjusted the original answer).

This is another technique. It uses a Grid with a SharedSizeGroup.

Note: the Grid.IsSharedScope=true on the ListView.

<Window x:Class="WpfApplication6.Window1"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="Window1" Height="300" Width="300">
<Grid>
    <ListView Name="lstCustomers" ItemsSource="{Binding Path=Collection}" Grid.IsSharedSizeScope="True">
        <ListView.View>
            <GridView>
                <GridViewColumn Header="ID" Width="40">
                    <GridViewColumn.CellTemplate>
                        <DataTemplate>
                             <Grid>
                                  <Grid.ColumnDefinitions>
                                       <ColumnDefinition Width="Auto" SharedSizeGroup="IdColumn"/>
                                  </Grid.ColumnDefinitions>
                                  <TextBlock HorizontalAlignment="Right" Text={Binding Path=Id}"/>
                             </Grid>
                        </DataTemplate>
                    </GridViewColumn.CellTemplate>
                </GridViewColumn>
                <GridViewColumn Header="First Name" DisplayMemberBinding="{Binding FirstName}" Width="Auto" />
                <GridViewColumn Header="Last Name" DisplayMemberBinding="{Binding LastName}" Width="Auto"/>
            </GridView>
        </ListView.View>
    </ListView>
</Grid>
</Window>

((Number) intOrLongOrSomewhat).longValue()

Works fine for me

See example here. http://jsfiddle.net/blowsie/c6VAy/

Make sure your jquery is inside $(document).ready function or similar.

Also you can improve your code by using jquery data

$('#amount').data('min','1000');

<div id="amount" data-min=""></div>

Update,

A working example of your full code (pretty much) here. http://jsfiddle.net/blowsie/c6VAy/3/

To get rid of the if/else awkwardness you could use a using block:

@{
    var count = 0;
    foreach (var item in Model)
    {
        using(Html.TableRow(new { @class = (count++ % 2 == 0) ? "alt-row" : "" }))
        {
            <td>
                @Html.DisplayFor(modelItem => item.Title)
            </td>
            <td>
                @Html.Truncate(item.Details, 75)
            </td>
            <td>
                <img src="@Url.Content("~/Content/Images/Projects/")@item.Images.Where(i => i.IsMain == true).Select(i => i.Name).Single()" 
                    alt="@item.Images.Where(i => i.IsMain == true).Select(i => i.AltText).Single()" class="thumb" />
            </td>
            <td>
                @Html.ActionLink("Edit", "Edit", new { id=item.ProjectId }) |
                @Html.ActionLink("Details", "Details", new { id = item.ProjectId }) |
                @Html.ActionLink("Delete", "Delete", new { id=item.ProjectId })
            </td>
        }
    }
}

Reusable element that make it easier to add attributes:

//Block is take from http://www.codeducky.org/razor-trick-using-block/
public class TableRow : Block
{
    private object _htmlAttributes;
    private TagBuilder _tr;

    public TableRow(HtmlHelper htmlHelper, object htmlAttributes) : base(htmlHelper)
    {
        _htmlAttributes = htmlAttributes;
    }

    public override void BeginBlock()
    {
        _tr = new TagBuilder("tr");
        _tr.MergeAttributes(HtmlHelper.AnonymousObjectToHtmlAttributes(_htmlAttributes));
        this.HtmlHelper.ViewContext.Writer.Write(_tr.ToString(TagRenderMode.StartTag));
    }

    protected override void EndBlock()
    {
        this.HtmlHelper.ViewContext.Writer.Write(_tr.ToString(TagRenderMode.EndTag));
    }
}

Helper method to make razor syntax clearer:

public static TableRow TableRow(this HtmlHelper self, object htmlAttributes)
{
    var tableRow = new TableRow(self, htmlAttributes);
    tableRow.BeginBlock();
    return tableRow;
}

First you need to define the List as :

List<Map<String, ArrayList<String>>> list = new ArrayList<>();

To add the Map to the List , use add(E e) method :

list.add(map);

I have used this script and it works well through the site.

if(empty($_SERVER['HTTPS']) || $_SERVER['HTTPS'] == "off"){
    $redirect = 'https://' . $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'];
    enter code hereheader('HTTP/1.1 301 Moved Permanently');
    header('Location: ' . $redirect);
    exit();
}

You generally should not add an app.config file to a class library project; it won't be used without some painful bending and twisting on your part. It doesn't hurt the library project at all - it just won't do anything at all.

Instead, you configure the application which is using your library; so the configuration information required would go there. Each application that might use your library likely will have different requirements, so this actually makes logical sense, too.

I use this code to remove my data but leave the formulas in the top row. It also removes all rows except for the top row and scrolls the page up to the top.

Sub CleanTheTable()
    Application.ScreenUpdating = False
    Sheets("Data").Select
    ActiveSheet.ListObjects("TestTable").HeaderRowRange.Select
    'Remove the filters if one exists.
    If ActiveSheet.FilterMode Then
    Selection.AutoFilter
    End If
    'Clear all lines but the first one in the table leaving formulas for the next go round.
    With Worksheets("Data").ListObjects("TestTable")
    .Range.AutoFilter
    On Error Resume Next
    .DataBodyRange.Offset(1).Resize(.DataBodyRange.Rows.Count - 1, .DataBodyRange.Columns.Count).Rows.Delete
    .DataBodyRange.Rows(1).SpecialCells(xlCellTypeConstants).ClearContents
    ActiveWindow.SmallScroll Down:=-10000

    End With
Application.ScreenUpdating = True
End Sub

We may need more information. Here is what I did to reproduce on SQL Server 2008:

CREATE DATABASE [Test] ON  PRIMARY 
    ( 
    NAME = N'Test'
    , FILENAME = N'...Test.mdf' 
    , SIZE = 3072KB 
    , FILEGROWTH = 1024KB 
    )
    LOG ON 
    ( 
    NAME = N'Test_log'
    , FILENAME = N'...Test_log.ldf' 
    , SIZE = 1024KB 
    , FILEGROWTH = 10%
    )
    COLLATE SQL_Latin1_General_CP850_BIN2
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[MyTable]
    (
    [SomeCol] [varchar](50) NULL
    ) ON [PRIMARY]
GO
Insert MyTable( SomeCol )
Select '±' Collate SQL_Latin1_General_CP1_CI_AS
GO
Select SomeCol, SomeCol Collate SQL_Latin1_General_CP1_CI_AS
From MyTable

Results show the original character. Declaring collation in the query should return the proper character from SQL Server's perspective however it may be the case that the presentation layer is then converting to something yet different like UTF-8.

1 - If you have spaces and want tabs.

First, you need to decide how many spaces will have a single tab. That said, suppose you have lines with leading 4 spaces, or 8... Than you realize you probably want a tab to be 4 spaces. Now with that info, you do:

:set ts=4
:set noet
:%retab!

There is a problem here! This sequence of commands will look for all your text, not only spaces in the begin of the line. That mean a string like: "Hey,?this????is?4?spaces" will become "Hey,?this?is?4?spaces", but its not! its a tab!.

To settle this little problem I recomend a search, instead of retab.

:%s/^\(^I*\)????/\1^I/g

This search will look in the whole file for any lines starting with whatever number of tabs, followed by 4 spaces, and substitute it for whatever number of tabs it found plus one.

This, unfortunately, will not run at once!

At first, the file will have lines starting with spaces. The search will then convert only the first 4 spaces to a tab, and let the following...

You need to repeat the command. How many times? Until you get a pattern not found. I cannot think of a way to automatize the process yet. But if you do:

`10@:`

You are probably done. This command repeats the last search/replace for 10 times. Its not likely your program will have so many indents. If it has, just repeat again @@.

Now, just to complete the answer. I know you asked for the opposite, but you never know when you need to undo things.

2 - You have tabs and want spaces.

First, decide how many spaces you want your tabs to be converted to. Lets say you want each tab to be 2 spaces. You then do:

:set ts=2
:set et
:%retab!

This would have the same problem with strings. But as its better programming style to not use hard tabs inside strings, you actually are doing a good thing here. If you really need a tab inside a string, use \t.

Html:

<div id="example">
  <button v-on:click="multiple">Multiple</button>
</div>

JS:

var vm = new Vue({
  el: '#example',
  data: {
    name: 'Vue.js'
  },
  // define methods under the `methods` object
  methods: {
    multiple: function (event) {
      this.first()
      this.second()
    }
    first:  function (event) {
      //yourstuff
    }
    second: function (event) {
      //yourstuff
    }
  }
})

vm.multiple()

Git Source Control Provider is new plug-in that integrates Git with Visual Studio.

This will end the function, and you can even customize the "Error" message:

import sys

def end():
    if condition:
        # the player wants to play again:
        main()
    elif not condition:
        sys.exit("The player doesn't want to play again") #Right here 

Try

$("#deliveryNext").is('[disabled]');

The problem is that flex: 1 sets flex-basis: 0. Instead, you need

.container .box {
  min-width: 200px;
  max-width: 400px;
  flex-basis: auto; /* default value */
  flex-grow: 1;
}

.container {_x000D_
  display: -webkit-flex;_x000D_
  display: flex;_x000D_
  -webkit-flex-wrap: wrap;_x000D_
  flex-wrap: wrap;_x000D_
}_x000D_
_x000D_
.container .box {_x000D_
  -webkit-flex-grow: 1;_x000D_
  flex-grow: 1;_x000D_
  min-width: 100px;_x000D_
  max-width: 400px;_x000D_
  height: 200px;_x000D_
  background-color: #fafa00;_x000D_
  overflow: hidden;_x000D_
}

<div class="container">_x000D_
  <div class="box">_x000D_
    <table>_x000D_
      <tr>_x000D_
        <td>Content</td>_x000D_
        <td>Content</td>_x000D_
        <td>Content</td>_x000D_
      </tr>_x000D_
    </table>    _x000D_
  </div>_x000D_
  <div class="box">_x000D_
    <table>_x000D_
      <tr>_x000D_
        <td>Content</td>_x000D_
      </tr>_x000D_
    </table>    _x000D_
  </div>_x000D_
  <div class="box">_x000D_
    <table>_x000D_
      <tr>_x000D_
        <td>Content</td>_x000D_
        <td>Content</td>_x000D_
      </tr>_x000D_
    </table>    _x000D_
  </div>_x000D_
</div>

Note that if the user may be in multiple zones used in the query, you may probably want to add .distinct(). Otherwise you get one user multiple times:

users_in_zones = User.objects.filter(zones__in=[zone1, zone2, zone3]).distinct()

Posting data is a matter of sending a query string (just like the way you would send it with an URL after the ?) as the request body.

This requires Content-Type and Content-Length headers, so the receiving server knows how to interpret the incoming data. ^(*)

var querystring = require('querystring');
var http = require('http');

var data = querystring.stringify({
      username: yourUsernameValue,
      password: yourPasswordValue
    });

var options = {
    host: 'my.url',
    port: 80,
    path: '/login',
    method: 'POST',
    headers: {
        'Content-Type': 'application/x-www-form-urlencoded',
        'Content-Length': Buffer.byteLength(data)
    }
};

var req = http.request(options, function(res) {
    res.setEncoding('utf8');
    res.on('data', function (chunk) {
        console.log("body: " + chunk);
    });
});

req.write(data);
req.end();

^(*) Sending data requires the Content-Type header to be set correctly, i.e. application/x-www-form-urlencoded for the traditional format that a standard HTML form would use.

It's easy to send JSON (application/json) in exactly the same manner; just JSON.stringify() the data beforehand.

URL-encoded data supports one level of structure (i.e. key and value). JSON is useful when it comes to exchanging data that has a nested structure.

The bottom line is: The server must be able to interpret the content type in question. It could be text/plain or anything else; there is no need to convert data if the receiving server understands it as it is.

Add a charset parameter (e.g. application/json; charset=Windows-1252) if your data is in an unusual character set, i.e. not UTF-8. This can be necessary if you read it from a file, for example.

To get caller/called class name use below code, it works fine for me.

String callerClassName = new Exception().getStackTrace()[1].getClassName();
String calleeClassName = new Exception().getStackTrace()[0].getClassName();

Use the pretty_generate() function, built into later versions of JSON. For example:

require 'json'
my_object = { :array => [1, 2, 3, { :sample => "hash"} ], :foo => "bar" }
puts JSON.pretty_generate(my_object)

Which gets you:

{
  "array": [
    1,
    2,
    3,
    {
      "sample": "hash"
    }
  ],
  "foo": "bar"
}

In order to execute multiple programs, I also needed a profiles section:

<profiles>
  <profile>
    <id>traverse</id>
    <activation>
      <property>
        <name>traverse</name>
      </property>
    </activation>
    <build>
      <plugins>
        <plugin>
          <groupId>org.codehaus.mojo</groupId>
          <artifactId>exec-maven-plugin</artifactId>
          <configuration>
            <executable>java</executable>
            <arguments>
              <argument>-classpath</argument>
              <argument>org.dhappy.test.NeoTraverse</argument>
            </arguments>
          </configuration>
        </plugin>
      </plugins>
    </build>
  </profile>
</profiles>

This is then executable as:

mvn exec:exec -Ptraverse

There's no need for "else" in this case:

IF EXISTS(SELECT *  FROM  table1  WHERE Name='John' ) return 1
return 0

This question should be on Server Fault. Nevertheless, the following should do the trick, assuming you're talking about TCP and the IP you want to allow is 1.2.3.4:

iptables -A INPUT -p tcp --dport 8000 -s 1.2.3.4 -j ACCEPT
iptables -A INPUT -p tcp --dport 8000 -j DROP

int i = 7122960;
decimal d = (decimal)i / 100;

@JoinColumn(name="reference_column_name") annotation can be used above that property or field of class that is being referenced from some other entity.

I have a small script interruptableloop.py that runs the code at an interval (default 1sec), it pumps out a message to the screen while it's running, and traps an interrupt signal that you can send with CTL-C:

#!/usr/bin/python3
from interruptableLoop import InterruptableLoop

loop=InterruptableLoop(intervalSecs=1) # redundant argument
while loop.ShouldContinue():
   # some python code that I want 
   # to keep on running
   pass

When you run the script and then interrupt it you see this output, (the periods pump out on every pass of the loop):

[py36]$ ./interruptexample.py
CTL-C to stop   (or $kill -s SIGINT pid)
......^C
Exiting at  2018-07-28 14:58:40.359331

interruptableLoop.py:

"""
    Use to create a permanent loop that can be stopped ...

    ... from same terminal where process was started and is running in foreground: 
        CTL-C

    ... from same user account but through a different terminal 
        $ kill -2 <pid> 
        or $ kill -s SIGINT <pid>

"""
import signal
import time
from datetime import datetime as dtt
__all__=["InterruptableLoop",]
class InterruptableLoop:
    def __init__(self,intervalSecs=1,printStatus=True):
        self.intervalSecs=intervalSecs
        self.shouldContinue=True
        self.printStatus=printStatus
        self.interrupted=False
        if self.printStatus:
            print ("CTL-C to stop\t(or $kill -s SIGINT pid)")
        signal.signal(signal.SIGINT, self._StopRunning)
        signal.signal(signal.SIGQUIT, self._Abort)
        signal.signal(signal.SIGTERM, self._Abort)

    def _StopRunning(self, signal, frame):
        self.shouldContinue = False

    def _Abort(self, signal, frame):
        raise 

    def ShouldContinue(self):
        time.sleep(self.intervalSecs)
        if self.shouldContinue and self.printStatus: 
            print( ".",end="",flush=True)
        elif not self.shouldContinue and self.printStatus:
            print ("Exiting at ",dtt.now())
        return self.shouldContinue

I did some benchmarking, and found that the list class is actually faster than LinkedList for random inserting:

using System;
using System.Collections.Generic;
using System.Diagnostics;

namespace ConsoleApplication1
{
    class Program
    {
        static void Main(string[] args)
        {
            int count = 20000;
            Random rand = new Random(12345);

            Stopwatch watch = Stopwatch.StartNew();
            LinkedList<int> ll = new LinkedList<int>();
            ll.AddLast(0);
            for (int i = 1; i < count; i++)
            {
                ll.AddBefore(ll.Find(rand.Next(i)),i);

            }
            Console.WriteLine("LinkedList/Random Add: {0}ms", watch.ElapsedMilliseconds);

            watch = Stopwatch.StartNew();
            List<int> list = new List<int>();
            list.Add(0);
            for (int i = 1; i < count; i++)
            {
                list.Insert(list.IndexOf(rand.Next(i)), i);

            }
            Console.WriteLine("List/Random Add: {0}ms", watch.ElapsedMilliseconds);

            Console.ReadLine();
        }
    }
}

It takes 900 ms for the linked list and 100ms for the list class.

It creates lists of subsequent integer numbers. Each new integer is inserted after a random number which is already in the list. Maybe the List class uses something better than just an array.

I needed to do same, but with a more complex array_filter on the keys.

Here's how I did it, using a similar method.

// Filter out array elements with keys shorter than 4 characters
$a = array(
  0      => "val 0", 
  "one"  => "val one", 
  "two"  => "val two", 
  "three"=> "val three", 
  "four" => "val four", 
  "five" => "val five", 
  "6"    => "val 6"
); 

$f = array_filter(array_keys($a), function ($k){ return strlen($k)>=4; }); 
$b = array_intersect_key($a, array_flip($f));
print_r($b);

This outputs the result:

Array
(
    [three] => val three
    [four] => val four
    [five] => val five
)

A full fledged jQuery plugin is available, check out the demo page: http://powerkiki.github.com/ie_expand_select_width/

disclaimer: I coded that thing, patches welcome

One way would be to just escape the quotes properly:

<input type="button" value="click" id="mybtn"
       onclick="myfunction('/myController/myAction', 
               'myfuncionOnOK(\'/myController2/myAction2\', 
                   \'myParameter2\');',
               'myfuncionOnCancel(\'/myController3/myAction3\', 
                   \'myParameter3\');');">

In this case, though, I think a better way to handle this would be to wrap the two handlers in anonymous functions:

<input type="button" value="click" id="mybtn"
       onclick="myfunction('/myController/myAction', 
                function() { myfuncionOnOK('/myController2/myAction2', 
                             'myParameter2'); },
                function() { myfuncionOnCancel('/myController3/myAction3', 
                             'myParameter3'); });">

And then, you could call them from within myfunction like this:

function myfunction(url, onOK, onCancel)
{
    // Do whatever myfunction would normally do...

    if (okClicked)
    {
        onOK();
    }

    if (cancelClicked)
    {
        onCancel();
    }
}

That's probably not what myfunction would actually look like, but you get the general idea. The point is, if you use anonymous functions, you have a lot more flexibility, and you keep your code a lot cleaner as well.

Try this:

var charArray = "this is a test".ToCharArray().Select(c=>c.ToString());

My problem was using **

testng

** package org.testng.Assert;

You can replace it in libraries of the project (Maven) with JUnit and then need to refactor project.
OR add TestNG Eclipse plug-in

http://testng.org/doc/eclipse.html

Assuming two decimal places on your percentages, the data type you use depends on how you plan to store your percentages. If you are going to store their fractional equivalent (e.g. 100.00% stored as 1.0000), I would store the data in a decimal(5,4) data type with a CHECK constraint that ensures that the values never exceed 1.0000 (assuming that is the cap) and never go below 0 (assuming that is the floor). If you are going to store their face value (e.g. 100.00% is stored as 100.00), then you should use decimal(5,2) with an appropriate CHECK constraint. Combined with a good column name, it makes it clear to other developers what the data is and how the data is stored in the column.

Here you can find a good example of how to format Y-Axis value.

Also, you can use scaleLabel : "<%=value%>" that you mentioned, It basically means that everything between <%= and %> tags will be treated as javascript code (i.e you can use if statments...)

Create a File object, passing the directory path to the constructor. Use the listFiles() to retrieve an array of File objects for each file in the directory, and then call the getName() method to get the filename.

List<String> results = new ArrayList<String>();


File[] files = new File("/path/to/the/directory").listFiles();
//If this pathname does not denote a directory, then listFiles() returns null. 

for (File file : files) {
    if (file.isFile()) {
        results.add(file.getName());
    }
}

Just make a custom userform that is shown when the "delete" button is pressed, then link the continue button to the actual code that does the deleting. Make the cancel button hide the userform.

Angular routes watch the browser's location, so simply using window.history.back() on clicking something would work.

HTML:

<div class="nav-header" ng-click="doTheBack()">Reverse!</div>

JS:

$scope.doTheBack = function() {
  window.history.back();
};

I usually create a global function called '$back' on my app controller, which I usually put on the body tag.

angular.module('myApp').controller('AppCtrl', ['$scope', function($scope) {
  $scope.$back = function() { 
    window.history.back();
  };
}]);

Then anywhere in my app I can just do <a ng-click="$back()">Back</a>

(If you want it to be more testable, inject the $window service into your controller and use $window.history.back()).

I only just wrote it for another issue and thought it may help either of you as well.

Usage:

• i.e. onclick="_DOM_Trackr(this);"

Parameters:

1. DOM-Object to trace
2. return/alert switch (optional, default=alert)

Source-Code:

function _DOM_Trackr(_elem,retn=false)
{
    var pathTrackr='';
    var $self=$(_elem).get(0);
    while($self && $self.tagName)
    {
        var $id=($($self).attr("id"))?('#'+$($self).attr("id")):'';
        var $nName=$self.tagName;
        pathTrackr=($nName.toLowerCase())+$id+((pathTrackr=='')?'':' > '+(pathTrackr));
        $self=$($self).parent().get(0);
    }
    if (retn)
    {
        return pathTrackr;
    }
    else
    {
        alert(pathTrackr);
    }
}

I am suggesting a much simpler utility I just wrote. It's currently called par, but will be renamed soon to either parl or pll, haven't decided yet.

https://github.com/k-bx/par

API is as simple as:

par "script1.sh" "script2.sh" "script3.sh"

Prefixing commands can be done via:

par "PARPREFIX=[script1] script1.sh" "script2.sh" "script3.sh"

or Simply you can go to the form and when you call the data to be displayed you set the property like datagridview1.columns(0).width = 150 datagridview1.columns(1).width = 150 datagridview1.columns(2).width = 150enter code here

So simple worked so fine with me Bro

What about creating an additional wrapper class?

package com.naveen.research.sql;

import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;

public abstract class PreparedStatementWrapper implements AutoCloseable {

    protected PreparedStatement stat;

    public PreparedStatementWrapper(Connection con, String query, Object ... params) throws SQLException {
        this.stat = con.prepareStatement(query);
        this.prepareStatement(params);
    }

    protected abstract void prepareStatement(Object ... params) throws SQLException;

    public ResultSet executeQuery() throws SQLException {
        return this.stat.executeQuery();
    }

    public int executeUpdate() throws SQLException {
        return this.stat.executeUpdate();
    }

    @Override
    public void close() {
        try {
            this.stat.close();
        } catch (SQLException e) {
            e.printStackTrace();
        }
    }
}

Then in the calling class you can implement prepareStatement method as:

try (Connection con = DriverManager.getConnection(JDBC_URL, prop);
    PreparedStatementWrapper stat = new PreparedStatementWrapper(con, query,
                new Object[] { 123L, "TEST" }) {
            @Override
            protected void prepareStatement(Object... params) throws SQLException {
                stat.setLong(1, Long.class.cast(params[0]));
                stat.setString(2, String.valueOf(params[1]));
            }
        };
        ResultSet rs = stat.executeQuery();) {
    while (rs.next())
        System.out.println(String.format("%s, %s", rs.getString(2), rs.getString(1)));
} catch (SQLException e) {
    e.printStackTrace();
}

I did everything from visiting http://www.google.com/accounts/DisplayUnlockCaptcha to setting up 2-fa and creating an application password. The only thing that worked was logging into http://mail.google.com and sending an email from the server itself.

UPDATE 
    myTable
SET 
    col = CONCAT( col , "string" )

Could not work it out. The request syntax was correct, but "0 line affected" when executed.

The solution was :

UPDATE 
    myTable 
SET 
    col = CONCAT( myTable.col , "string" )

That one worked.

If you see the source code of indexOf in JAVA:

public int indexOf(int ch, int fromIndex) {

        final int max = value.length;

        if (fromIndex < 0) {

            fromIndex = 0;

        } else if (fromIndex >= max) {

            // Note: fromIndex might be near -1>>>1.

            return -1;

        }


        if (ch < Character.MIN_SUPPLEMENTARY_CODE_POINT) {

            // handle most cases here (ch is a BMP code point or a

            // negative value (invalid code point))

            final char[] value = this.value;

            for (int i = fromIndex; i < max; i++) {

                if (value[i] == ch) {

                    return i;

                }

            }

            return -1;

        } else {

            return indexOfSupplementary(ch, fromIndex);

        }

    }

you can see it uses a for loop for finding a character. Note that each indexOf you may use in your code, is equal to one loop.

So, it is unavoidable to use loop for a single character.

However, if you want to find a special string with more different forms, use useful libraries such as util.regex, it deploys stronger algorithm to match a character or a string pattern with Regular Expressions. For example to find an email in a string:

String regex = "^(.+)@(.+)$";
 
Pattern pattern = Pattern.compile(regex);
Matcher matcher = pattern.matcher(email);

If you don't like to use regex, just use a loop and charAt and try to cover all cases in one loop.

Be careful recursive methods has more overhead than loop, so it's not recommended.

To be on the safer side, just name all your constraints and take note of them in the comment section.

ALTER TABLE[table_name]
DROP CONSTRAINT Constraint_name

i think the assets folder is public, you can access it directly on the browser

http://localhost:4020/assets/

unlike other privates folders, drop your json file in the assets folder

Well I used the advice here and it screwed me as it merged my local code directly to master. .... so take it all with a grain of salt. My coworker said the following helped resolve the issue, needed to repoint my branch.

 git branch --set-upstream-to=origin/feature/my-current-branch feature/my-current-branch

Another option is to use numpy.full, an option available in NumPy 1.8+

a = np.full([height, width, 9], np.nan)

This is pretty flexible and you can fill it with any other number that you want.

UPDATE: In iPhone OS 3.0 and later UITableViewCell now has a backgroundColor property that makes this really easy (especially in combination with the [UIColor colorWithPatternImage:] initializer). But I'll leave the 2.0 version of the answer here for anyone that needs it…

It's harder than it really should be. Here's how I did this when I had to do it:

You need to set the UITableViewCell's backgroundView property to a custom UIView that draws the border and background itself in the appropriate colors. This view needs to be able to draw the borders in 4 different modes, rounded on the top for the first cell in a section, rounded on the bottom for the last cell in a section, no rounded corners for cells in the middle of a section, and rounded on all 4 corners for sections that contain one cell.

Unfortunately I couldn't figure out how to have this mode set automatically, so I had to set it in the UITableViewDataSource's -cellForRowAtIndexPath method.

It's a real PITA but I've confirmed with Apple engineers that this is currently the only way.

Update Here's the code for that custom bg view. There's a drawing bug that makes the rounded corners look a little funny, but we moved to a different design and scrapped the custom backgrounds before I had a chance to fix it. Still this will probably be very helpful for you:

//
//  CustomCellBackgroundView.h
//
//  Created by Mike Akers on 11/21/08.
//  Copyright 2008 __MyCompanyName__. All rights reserved.
//

#import <UIKit/UIKit.h>

typedef enum  {
    CustomCellBackgroundViewPositionTop, 
    CustomCellBackgroundViewPositionMiddle, 
    CustomCellBackgroundViewPositionBottom,
    CustomCellBackgroundViewPositionSingle
} CustomCellBackgroundViewPosition;

@interface CustomCellBackgroundView : UIView {
    UIColor *borderColor;
    UIColor *fillColor;
    CustomCellBackgroundViewPosition position;
}

    @property(nonatomic, retain) UIColor *borderColor, *fillColor;
    @property(nonatomic) CustomCellBackgroundViewPosition position;
@end

//
//  CustomCellBackgroundView.m
//
//  Created by Mike Akers on 11/21/08.
//  Copyright 2008 __MyCompanyName__. All rights reserved.
//

#import "CustomCellBackgroundView.h"

static void addRoundedRectToPath(CGContextRef context, CGRect rect,
                                 float ovalWidth,float ovalHeight);

@implementation CustomCellBackgroundView
@synthesize borderColor, fillColor, position;

- (BOOL) isOpaque {
    return NO;
}

- (id)initWithFrame:(CGRect)frame {
    if (self = [super initWithFrame:frame]) {
        // Initialization code
    }
    return self;
}

- (void)drawRect:(CGRect)rect {
    // Drawing code
    CGContextRef c = UIGraphicsGetCurrentContext();
    CGContextSetFillColorWithColor(c, [fillColor CGColor]);
    CGContextSetStrokeColorWithColor(c, [borderColor CGColor]);

    if (position == CustomCellBackgroundViewPositionTop) {
        CGContextFillRect(c, CGRectMake(0.0f, rect.size.height - 10.0f, rect.size.width, 10.0f));
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, 0.0f, rect.size.height - 10.0f);
        CGContextAddLineToPoint(c, 0.0f, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, rect.size.height - 10.0f);
        CGContextStrokePath(c);
        CGContextClipToRect(c, CGRectMake(0.0f, 0.0f, rect.size.width, rect.size.height - 10.0f));
    } else if (position == CustomCellBackgroundViewPositionBottom) {
        CGContextFillRect(c, CGRectMake(0.0f, 0.0f, rect.size.width, 10.0f));
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, 0.0f, 10.0f);
        CGContextAddLineToPoint(c, 0.0f, 0.0f);
        CGContextStrokePath(c);
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, rect.size.width, 0.0f);
        CGContextAddLineToPoint(c, rect.size.width, 10.0f);
        CGContextStrokePath(c);
        CGContextClipToRect(c, CGRectMake(0.0f, 10.0f, rect.size.width, rect.size.height));
    } else if (position == CustomCellBackgroundViewPositionMiddle) {
        CGContextFillRect(c, rect);
        CGContextBeginPath(c);
        CGContextMoveToPoint(c, 0.0f, 0.0f);
        CGContextAddLineToPoint(c, 0.0f, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, rect.size.height);
        CGContextAddLineToPoint(c, rect.size.width, 0.0f);
        CGContextStrokePath(c);
        return; // no need to bother drawing rounded corners, so we return
    }

    // At this point the clip rect is set to only draw the appropriate
    // corners, so we fill and stroke a rounded rect taking the entire rect

    CGContextBeginPath(c);
    addRoundedRectToPath(c, rect, 10.0f, 10.0f);
    CGContextFillPath(c);  

    CGContextSetLineWidth(c, 1);  
    CGContextBeginPath(c);
    addRoundedRectToPath(c, rect, 10.0f, 10.0f);  
    CGContextStrokePath(c); 
}


- (void)dealloc {
    [borderColor release];
    [fillColor release];
    [super dealloc];
}


@end

static void addRoundedRectToPath(CGContextRef context, CGRect rect,
                                float ovalWidth,float ovalHeight)

{
    float fw, fh;

    if (ovalWidth == 0 || ovalHeight == 0) {// 1
        CGContextAddRect(context, rect);
        return;
    }

    CGContextSaveGState(context);// 2

    CGContextTranslateCTM (context, CGRectGetMinX(rect),// 3
                           CGRectGetMinY(rect));
    CGContextScaleCTM (context, ovalWidth, ovalHeight);// 4
    fw = CGRectGetWidth (rect) / ovalWidth;// 5
    fh = CGRectGetHeight (rect) / ovalHeight;// 6

    CGContextMoveToPoint(context, fw, fh/2); // 7
    CGContextAddArcToPoint(context, fw, fh, fw/2, fh, 1);// 8
    CGContextAddArcToPoint(context, 0, fh, 0, fh/2, 1);// 9
    CGContextAddArcToPoint(context, 0, 0, fw/2, 0, 1);// 10
    CGContextAddArcToPoint(context, fw, 0, fw, fh/2, 1); // 11
    CGContextClosePath(context);// 12

    CGContextRestoreGState(context);// 13
}

The optimizer often cannot use the relational algebra to transform the problem when a cursor method is used. Often a cursor is a great way to solve a problem, but SQL is a declarative language, and there is a lot of information in the database, from constraints, to statistics and indexes which mean that the optimizer has a lot of options to solve the problem, whereas a cursor pretty much explicitly directs the solution.

Permanent generation

You can set your data-type as signed integer. When you storage coordinates to SQL you can set as lat*10000000 and long*10000000. And when you selecting with distance/radius you will divide storage coordinates to 10000000. I was test it with 300K rows, query response time is good. ( 2 x 2.67GHz CPU, 2 GB RAM, MySQL 5.5.49 )

My solution is based on the TechNet article Fun Things You Can Do With the Get-ChildItem Cmdlet.

Get-ChildItem C:\foo | Where-Object {$_.mode -match "d"}

I used it in my script, and it works well.

I allowed numeric keypad numbers and backspace:

    private void TextBox_PreviewKeyDown(object sender, KeyEventArgs e)
    {
        int key = (int)e.Key;

        e.Handled = !(key >= 34 && key <= 43 || 
                      key >= 74 && key <= 83 || 
                      key == 2);
    }

I started using the AngiesList.Redis.RedisSessionStateModule, which aside from using the (very fast) Redis server for storage (I'm using the windows port -- though there is also an MSOpenTech port), it does absolutely no locking on the session.

In my opinion, if your application is structured in a reasonable way, this is not a problem. If you actually need locked, consistent data as part of the session, you should specifically implement a lock/concurrency check on your own.

MS deciding that every ASP.NET session should be locked by default just to handle poor application design is a bad decision, in my opinion. Especially because it seems like most developers didn't/don't even realize sessions were locked, let alone that apps apparently need to be structured so you can do read-only session state as much as possible (opt-out, where possible).

You can use Oracle Data Dictionary to get information about oracle objects.

You can get list of tables in different ways:

select * 
from dba_tables

or for example:

select * 
from dba_objects 
where object_type = 'TABLE' 

Then you can get table columns using table name:

select * 
from dba_tab_columns

Then you can get list of dependencies (triggers, views and etc.):

select * 
from dba_dependencies
where referenced_type='TABLE' and referenced_name=:t_name 

Then you can get text source of this objects:

select * from dba_source

And you can use USER or ALL views instead of DBA if you want.

From where did you get the idea that you need to free(token) and free(tk)? You don't. strsep() doesn't allocate memory, it only returns pointers inside the original string. Of course, those are not pointers allocated by malloc() (or similar), so free()ing them is undefined behavior. You only need to free(s) when you are done with the entire string.

Also note that you don't need dynamic memory allocation at all in your example. You can avoid strdup() and free() altogether by simply writing char *s = p;.

<Button Content="Click" Width="200" Height="50">
<Button.Style>
    <Style TargetType="{x:Type Button}">
        <Setter Property="Background" Value="LightBlue" />
        <Setter Property="Template">
            <Setter.Value>
                <ControlTemplate TargetType="{x:Type Button}">
                    <Border x:Name="Border" Background="{TemplateBinding Background}">
                        <ContentPresenter HorizontalAlignment="Center" VerticalAlignment="Center" />
                    </Border>
                    <ControlTemplate.Triggers>
                        <Trigger Property="IsMouseOver" Value="True">
                            <Setter Property="Background" Value="LightGreen" TargetName="Border" />
                        </Trigger>
                    </ControlTemplate.Triggers>
                </ControlTemplate>
            </Setter.Value>
        </Setter>
    </Style>
</Button.Style>

For your question as asked

Columns(3).Insert
Range("c1:c4") = Application.Transpose(Array("Loc", "uk", "us", "nj"))

If you had a way of automatically looking up the data (ie matching uk against employer id) then you could do that in VBA

There are two problems with your xpath - first you need to remove the child selector from after Data like phihag mentioned. Also you forgot to include root in your xpath. Here is what you want to do:

select="/root/DataSet/Data[@Value1='2']/@Value2"

Well my problem was that i used the code from the answer, which is checked as a solution here, but after the replacement was executed, the first layer was still visible and functionating under just opened fragment. My solution was simmple, i added

.remove(CourseListFragment.this)

the CourseListFragment is a class file for the fragment i tried to close. (MainActivity.java, but for specific section (navigation drawer fragment), if it makes more sense to you) so my code looks like this now :

LecturesFragment nextFrag= new LecturesFragment();

                    getActivity().getSupportFragmentManager().beginTransaction()
                            .remove(CourseListFragment.this)
                            .replace(((ViewGroup)getView().getParent()).getId(), nextFrag, "findThisFragment")
                            .addToBackStack(null)
                            .commit();

And it works like a charm for me.

Misspellings are irritating, aren't they? Check your spelling of empty, but then also try this:

#!/bin/bash -e

if [ -s diff.txt ]
then
        rm -f empty.txt
        touch full.txt
else
        rm -f full.txt
        touch empty.txt
fi

I like shell scripting a lot, but one disadvantage of it is that the shell cannot help you when you misspell, whereas a compiler like your C++ compiler can help you.

Notice incidentally that I have swapped the roles of empty.txt and full.txt, as @Matthias suggests.

I'm using Argos reporting system as a front end and Oracle in back. I just encountered this error and it was caused by a string with a double quote at the start and a single quote at the end. Replacing the double quote with a single solved the issue.

%08x means that every number should be printed at least 8 characters wide with filling all missing digits with zeros, e.g. for '1' output will be 00000001

For me, the following mostly works:

have pip installed, e.g.:

$ easy_install pip

Check, how is your installed package named from pip point of view:

$ pip freeze

This shall list names of all packages, you have installed (and which were detected by pip). The name can be sometime long, then use just the name of the package being shown at the and after #egg=. You can also in most cases ignore the version part (whatever follows == or -).

Then uninstall the package:

$ pip uninstall package.name.you.have.found

If it asks for confirmation about removing the package, then you are lucky guy and it will be removed.

pip shall detect all packages, which were installed by pip. It shall also detect most of the packages installed via easy_install or setup.py, but this may in some rare cases fail.

Here is real sample from my local test with package named ttr.rdstmc on MS Windows.

$ pip freeze |grep ttr
ttr.aws.s3==0.1.1dev
ttr.aws.utils.s3==0.3.0
ttr.utcutils==0.1.1dev

$ python setup.py develop
.....
.....
Finished processing dependencies for ttr.rdstmc==0.0.1dev

$ pip freeze |grep ttr
ttr.aws.s3==0.1.1dev
ttr.aws.utils.s3==0.3.0
-e hg+https://[email protected]/vlcinsky/ttr.rdstmc@d61a9922920c508862602f7f39e496f7b99315f0#egg=ttr.rdstmc-dev
ttr.utcutils==0.1.1dev

$ pip uninstall ttr.rdstmc
Uninstalling ttr.rdstmc:
  c:\python27\lib\site-packages\ttr.rdstmc.egg-link
Proceed (y/n)? y
  Successfully uninstalled ttr.rdstmc

$ pip freeze |grep ttr
ttr.aws.s3==0.1.1dev
ttr.aws.utils.s3==0.3.0
ttr.utcutils==0.1.1dev

Edit 2015-05-20

All what is written above still applies, anyway, there are small modifications available now.

Install pip in python 2.7.9 and python 3.4

Recent python versions come with a package ensurepip allowing to install pip even when being offline:

$ python -m ensurepip --upgrade

On some systems (like Debian Jessie) this is not available (to prevent breaking system python installation).

Using grep or find

Examples above assume, you have grep installed. I had (at the time I had MS Windows on my machine) installed set of linux utilities (incl. grep). Alternatively, use native MS Windows find or simply ignore that filtering and find the name in a bit longer list of detected python packages.

From the searching I've done it appears you can not declare and set variables like this in Select statements. Is this right or am I missing something?

Within Oracle PL/SQL and SQL are two separate languages with two separate engines. You can embed SQL DML within PL/SQL, and that will get you variables. Such as the following anonymous PL/SQL block. Note the / at the end is not part of PL/SQL, but tells SQL*Plus to send the preceding block.

declare 
    v_Date1 date := to_date('03-AUG-2010', 'DD-Mon-YYYY');
    v_Count number;
begin
    select count(*) into v_Count
    from Usage
    where UseTime > v_Date1;
    dbms_output.put_line(v_Count);
end;
/

The problem is that a block that is equivalent to your T-SQL code will not work:

SQL> declare 
  2      v_Date1 date := to_date('03-AUG-2010', 'DD-Mon-YYYY');
  3  begin
  4      select VisualId
  5      from Usage
  6      where UseTime > v_Date1;
  7  end;
  8  /
    select VisualId
    *
ERROR at line 4:
ORA-06550: line 4, column 5:
PLS-00428: an INTO clause is expected in this SELECT statement

To pass the results of a query out of an PL/SQL, either an anonymous block, stored procedure or stored function, a cursor must be declared, opened and then returned to the calling program. (Beyond the scope of answering this question. EDIT: see Get resultset from oracle stored procedure)

The client tool that connects to the database may have it's own bind variables. In SQL*Plus:

SQL> -- SQL*Plus does not all date type in this context
SQL> -- So using varchar2 to hold text
SQL> variable v_Date1 varchar2(20)
SQL>
SQL> -- use PL/SQL to set the value of the bind variable
SQL> exec :v_Date1 := '02-Aug-2010';

PL/SQL procedure successfully completed.

SQL> -- Converting to a date, since the variable is not yet a date.
SQL> -- Note the use of colon, this tells SQL*Plus that v_Date1
SQL> -- is a bind variable.
SQL> select VisualId
  2  from Usage
  3  where UseTime > to_char(:v_Date1, 'DD-Mon-YYYY');

no rows selected

Note the above is in SQLPlus, may not (probably won't) work in Toad PL/SQL developer, etc. The lines starting with variable and exec are SQLPlus commands. They are not SQL or PL/SQL commands. No rows selected because the table is empty.

Another option:

a = [2,4,6,3,8]

a -= [3]

which results in

=> [2, 4, 6, 8] 

If you want to create a CORS service from PHP, you can use this code as the first step in your file that handles the requests:

// Allow from any origin
if(isset($_SERVER["HTTP_ORIGIN"]))
{
    // You can decide if the origin in $_SERVER['HTTP_ORIGIN'] is something you want to allow, or as we do here, just allow all
    header("Access-Control-Allow-Origin: {$_SERVER['HTTP_ORIGIN']}");
}
else
{
    //No HTTP_ORIGIN set, so we allow any. You can disallow if needed here
    header("Access-Control-Allow-Origin: *");
}

header("Access-Control-Allow-Credentials: true");
header("Access-Control-Max-Age: 600");    // cache for 10 minutes

if($_SERVER["REQUEST_METHOD"] == "OPTIONS")
{
    if (isset($_SERVER["HTTP_ACCESS_CONTROL_REQUEST_METHOD"]))
        header("Access-Control-Allow-Methods: POST, GET, OPTIONS, DELETE, PUT"); //Make sure you remove those you do not want to support

    if (isset($_SERVER["HTTP_ACCESS_CONTROL_REQUEST_HEADERS"]))
        header("Access-Control-Allow-Headers: {$_SERVER['HTTP_ACCESS_CONTROL_REQUEST_HEADERS']}");

    //Just exit with 200 OK with the above headers for OPTIONS method
    exit(0);
}
//From here, handle the request as it is ok

try out this if you want to assign value to object and it is showing this error in angular..

crate object in construtor

this.modelObj = new Model(); //<---------- after declaring object above

Here's a version that uses setjmp/longjmp, because someone had to do it:

#include <stdio.h>
#include <stdlib.h>
#include <setjmp.h>

void print(int i) {
    printf("%d\n", i);
}
typedef void (*func_t)(int);

int main() {
    jmp_buf buf;
    func_t f[] = {print, exit};
    int i = setjmp(buf)+1;
    f[i/1001](i);
    longjmp(buf, i);
    return 0;
}

Identify the hash of the commit, using git log, then use git revert <commit> to create a new commit that removes these changes. In a way, git revert is the converse of git cherry-pick -- the latter applies the patch to a branch that's missing it, the former removes it from a branch that has it.

You'll need to write an insert trigger, and possible an update trigger if you want it to change when the record is changed. This article explains it quite nicely:

http://www.revsys.com/blog/2006/aug/04/automatically-updating-a-timestamp-column-in-postgresql/

CREATE OR REPLACE FUNCTION update_modified_column()   
RETURNS TRIGGER AS $$
BEGIN
    NEW.modified = now();
    RETURN NEW;   
END;
$$ language 'plpgsql';

Apply the trigger like this:

CREATE TRIGGER update_customer_modtime BEFORE UPDATE ON customer FOR EACH ROW EXECUTE PROCEDURE  update_modified_column();

With Excel 2007 on Windows, I found these steps simplest;

1. Select cells with the non-active URLs
2. Copy
3. Paste as hyperlink

OK, answering to my own question.

Steps to connect LocalDB to Visual Studio Server Explorer

1. Open command prompt
2. Run SqlLocalDB.exe start v11.0
3. Run SqlLocalDB.exe info v11.0
4. Copy the Instance pipe name that starts with np:\...
5. In Visual Studio select TOOLS > Connect to Database...
6. For Server Name enter (localdb)\v11.0. If it didn't work, use the Instance pipe name that you copied earlier. You can also use this to connect with SQL Management Studio.
7. Select the database on next dropdown list
8. Click OK

I used Pauls (see his answer) Implementation of HorizontalListview and it works, thank you so much for sharing!

I slightly changed his HorizontalListView-Class (btw. Paul there is a typo in your classname, your classname is "HorizontialListView" instead of "HorizontalListView", the "i" is too much) to update child-views when selected.

UPDATE: My code that I posted here was wrong I suppose, as I ran into trouble with selection (i think it has to do with view recycling), I have to go back to the drawing board...

UPDATE 2: Ok Problem solved, I simply commented "removeNonVisibleItems(dx);" in "onLayout(..)", I guess this will hurt performance, but since I am using only very small Lists this is no Problem for me.

I basically used this tutorial here on developerlife and just replaced ListView with Pauls HorizontalListView, and made the changes to allow for "permanent" selection (a child that is clicked on changes its appearance, and when its clicked on again it changes it back).

I am a beginner, so probably many ugly things in the code, let me know if you need more details.

I faced the same problem, and I solved it in a tricky way. First make global variables, v1, v2, and v3. And in the onclick, send an indicator, 1, 2, or 3 and in the function check for 1, 2, 3 to put the v1, v2, and v3 like:

onclick="myfun(1)"
onclick="myfun(2)"
onclick="myfun(3)"

function myfun(var)
{
    if (var ==1)
        alert(v1);

    if (var ==2)
        alert(v2);

    if (var ==3)
        alert(v3);
}

Creating a table and copying the data in a single command:

create table T_NEW as
  select * from T;

* This will not copy PKs, FKs, Triggers, etc.

In my case I wanted to achieve format "HH:MM:SS.fff". I solved it like this:

timestamp = 28.97000002861023
str(datetime.fromtimestamp(timestamp)+timedelta(hours=-1)).split(' ')[1][:12]
'00:00:28.970'

NameValueCollection nvclc = Request.Form;
string   uName= nvclc ["txtUserName"];
string   pswod= nvclc ["txtPassword"];
//try login
CheckLogin(uName, pswod);

If you put constrains on a generic class or method, every other generic class or method that is using it need to have "at least" those constrains.

How to install java packages:

Install desired java version / versions using official ubuntu packages, which are managed using alternatives:
sudo apt install -y openjdk-8-jdk
or/and other version: sudo apt install -y openjdk-11-jdk

Above answers are correct only when you have only one version for all software on your machine, and you can skip using update-alternatives. So one can quickly hardcode it in .bashrc or some other place:
export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-amd64
but it's not healthy, as later on you may change the version.

Correct way to set JAVA_HOME (and optionally JAVA_SDK, JAVA_JRE )

The correct way (and mandatory when you have more than one), is to detect what update-alternative is pointing to, and always use update-alternatives to switch active version.

Here are the suggestions for both: only specific unix account or for all accounts (machine level).

1. for a specific unix account only:

Use this if you don't have permissions to do it at machine level.

cat <<'EOF' >>~/.bashrc

export JAVA_HOME=$(update-alternatives --query java | grep Value | cut -d" " -f2 | sed 's!\(\/.*\)jre\(.*\)!\1!g')
export JDK_HOME=${JAVA_HOME}
export JRE_HOME=${JDK_HOME}/jre/

EOF

2. To do it at machine level, and for all bourne shells, you need 2 steps:

2.a

cat <<'EOF' | sudo tee /etc/profile.d/java_home_env.sh >/dev/null

export JAVA_HOME=$(update-alternatives --query java | grep Value | cut -d" " -f2 | sed 's!\(\/.*\)jre\(.*\)!\1!g')
export JDK_HOME=${JAVA_HOME}
export JRE_HOME=${JDK_HOME}/jre/

EOF

As your shell might not be set as interactive by default, you may want to do this also:
2.b

cat <<'EOF' | sudo tee -a /etc/bash.bashrc >/dev/null
if [ -d /etc/profile.d ]; then
  for i in /etc/profile.d/*.sh; do
    if [ -r $i ]; then
      . $i
    fi
  done
  unset i
fi
EOF

PS: There should be no need to update the $PATH, as update-alternatives takes care of the link to /usr/bin/.
More on: https://manpages.ubuntu.com/manpages/trusty/man8/update-alternatives.8.html

You can modify with the following

<li><a href="./Index" class="elements"><span>Clients</span></a></li>

The extra dot means you are in the same controller. If you want change the controller to a different controller then you can write this

<li><a href="../newController/Index" class="elements"><span>Clients</span></a></li>

Use ScriptEngine.eval(java.io.Reader) to read the script

ScriptEngineManager manager = new ScriptEngineManager();
ScriptEngine engine = manager.getEngineByName("JavaScript");
// read script file
engine.eval(Files.newBufferedReader(Paths.get("C:/Scripts/Jsfunctions.js"), StandardCharsets.UTF_8));

Invocable inv = (Invocable) engine;
// call function from script file
inv.invokeFunction("yourFunction", "param");

Comments work fine in any of the usual Java/Groovy forms, but you can't currently use groovydoc to process your Jenkinsfile (s).

First, groovydoc chokes on files without extensions with the wonderful error

java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:498)
    at org.codehaus.groovy.tools.GroovyStarter.rootLoader(GroovyStarter.java:109)
    at org.codehaus.groovy.tools.GroovyStarter.main(GroovyStarter.java:131)
Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: -1
    at java.lang.String.substring(String.java:1967)
    at org.codehaus.groovy.tools.groovydoc.SimpleGroovyClassDocAssembler.<init>(SimpleGroovyClassDocAssembler.java:67)
    at org.codehaus.groovy.tools.groovydoc.GroovyRootDocBuilder.parseGroovy(GroovyRootDocBuilder.java:131)
    at org.codehaus.groovy.tools.groovydoc.GroovyRootDocBuilder.getClassDocsFromSingleSource(GroovyRootDocBuilder.java:83)
    at org.codehaus.groovy.tools.groovydoc.GroovyRootDocBuilder.processFile(GroovyRootDocBuilder.java:213)
    at org.codehaus.groovy.tools.groovydoc.GroovyRootDocBuilder.buildTree(GroovyRootDocBuilder.java:168)
    at org.codehaus.groovy.tools.groovydoc.GroovyDocTool.add(GroovyDocTool.java:82)
    at org.codehaus.groovy.tools.groovydoc.GroovyDocTool$add.call(Unknown Source)
    at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:48)
    at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:113)
    at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:125)
    at org.codehaus.groovy.tools.groovydoc.Main.execute(Main.groovy:214)
    at org.codehaus.groovy.tools.groovydoc.Main.main(Main.groovy:180)
    ... 6 more

... and second, as far as I can tell Javadoc-style commments at the start of a groovy script are ignored. So even if you copy/rename your Jenkinsfile to Jenkinsfile.groovy, you won't get much useful output.

I want to be able to use a

/**
 * Document my Jenkinsfile's overall purpose here
 */

comment at the start of my Jenkinsfile. No such luck (yet).

groovydoc will process classes and methods defined in your Jenkinsfile if you pass -private to the command, though.

Try putting it in a span element:

<div id='page' style='width: 600px'>_x000D_
  <h1><span style='border:2px black solid; font-size:42px;'>Title</span></h1>_x000D_
</div>

I like to use

Properties

Example:

Properties props = new Properties();

props.setProperty("displayName", "Jim Wilson"); // (key, value)

String name = props.getProperty("displayName"); // => Jim Wilson

String acctNum = props.getProperty("accountNumber"); // => null

String nextPosition = props.getProperty("position", "1"); // => 1

If you are familiar with a hash table you will be pretty familiar with this already

"start" is a name of a script, in npm you run scripts like this npm run scriptName, npm start is also a short for npm run start

As for "react-scripts" this is a script related specifically to create-react-app

Hibernate's PostgreSQL dialect isn't very bright. It doesn't know about your per-SERIAL sequences, and is assuming there's a global database-wide sequence called "hibernate_sequence" that it can use.

(UPDATE: It appears that newer Hibernate versions may use the default per-table sequences when GenerationType.IDENTITY is specified. Test your version and use this instead of the below if it works for you.)

You need to change your mappings to explicitly specify each sequence. It's annoying, repetitive, and pointless.

@Entity
@Table(name = "JUDGEMENTS")
public class Judgement implements Serializable, Cloneable {

    private static final long serialVersionUID = -7049957706738879274L;

    @Id
    @GeneratedValue(strategy = GenerationType.SEQUENCE, generator="judgements_id_seq")
    @SequenceGenerator(name="judgements_id_seq", sequenceName="judgements_id_seq", allocationSize=1)
    @Column(name = "JUD_ID")
    private Long _judId;
...

The allocationSize=1 is quite important. If you omit it, Hibernate will blindly assume that the sequence is defined with INCREMENT 50 so when it gets a value from a sequence it can use that value and the 49 values below it as unique generated keys. If your database sequences increment by 1 - the default - then this will result in unique violations as Hibernate tries to re-use existing keys.

Note that getting one key at a time will result in an additional round trip per insert. As far as I can tell Hibernate isn't capable of using INSERT ... RETURNING to efficiently return generated keys, nor can it apparently use the JDBC generated keys interface. If you tell it to use a sequence, it'll call nextval to get the value then insert that explicitly, resulting in two round trips. To reduce the cost of that, you can set a greater increment on key sequences with lots of inserts , remembering to set it on the mapping and the underlying database sequence. That'll cause Hibernate to call nextval less frequently and cache blocks of keys to hand out as it goes.

I'm sure you can see from the above that I don't agree with the Hibernate design choices made here, at least from the perspective of using it with PostgreSQL. They should be using getGeneratedKeys or using INSERT ... RETURNING with DEFAULT for the key, letting the database take care of this without Hibernate having to trouble its self over the names of the sequences or explicit access to them.

BTW, if you're using Hibernate with Pg you'll possibly also want an oplock trigger for Pg to allow Hibernate's optimistic locking to interact safely with normal database locking. Without it or something like it your Hibernate updates will tend to clobber changes made via other regular SQL clients. Ask me how I know.

ArrayList<Customer> custArr = new ArrayList<Customer>();
while(youWantToContinue) {
    //get a customerName
    //get an amount
    custArr.add(new Customer(customerName, amount);
}

For this to work... you'll have to fix your constructor...

Assuming your Customer class has variables called name and sale, your constructor should look like this:

public Customer(String customerName, double amount) {
    name = customerName;
    sale = amount;
}

Change your Store class to something more like this:

public class Store {

    private ArrayList<Customer> custArr;

    public new Store() {
        custArr = new ArrayList<Customer>();
    }

    public void addSale(String customerName, double amount) {
        custArr.add(new Customer(customerName, amount));
    }

    public Customer getSaleAtIndex(int index) {
        return custArr.get(index);
    }

    //or if you want the entire ArrayList:
    public ArrayList getCustArr() {
        return custArr;
    }
}

If you don't have DBA rights then you can use user_segments table:

select bytes/1024/1024 MB from user_segments where segment_name='Table_name'

try this package, works wonders, and was made for date/time...

library(lubridate)
Portfolio$Date2 <- mdy(Portfolio.all$Date2)

As of version 2.4, you can create a text index on the field(s) to search and use the $text operator for querying.

First, create the index:

db.users.createIndex( { "username": "text" } )

Then, to search:

db.users.find( { $text: { $search: "son" } } )

Benchmarks (~150K documents):

• Regex (other answers) => 5.6-6.9 seconds
• Text Search => .164-.201 seconds

Notes:

• A collection can have only one text index. You can use a wildcard text index if you want to search any string field, like this: db.collection.createIndex( { "$**": "text" } ).
• A text index can be large. It contains one index entry for each unique post-stemmed word in each indexed field for each document inserted.
• A text index will take longer to build than a normal index.
• A text index does not store phrases or information about the proximity of words in the documents. As a result, phrase queries will run much more effectively when the entire collection fits in RAM.

in case some extra manipulation of the data is desired, for which the user wants a function, this approach is not perfect (as it requires passing the class of the element as second parameter), but works:

import java.util.ArrayList; import java.lang.reflect.Array;

public class Test {
  public static void main(String[] args) {
    ArrayList<Integer> al = new ArrayList<>();
    al.add(1);
    al.add(2);
    Integer[] arr = convert(al, Integer.class);
    for (int i=0; i<arr.length; i++)
      System.out.println(arr[i]);
  }

  public static <T> T[] convert(ArrayList<T> al, Class clazz) {
    return (T[]) al.toArray((T[])Array.newInstance(clazz, al.size()));
  }
}

Here is another one:

stats = {'a':1000, 'b':3000, 'c': 100}
max(stats.iterkeys(), key=lambda k: stats[k])

The function key simply returns the value that should be used for ranking and max() returns the demanded element right away.

I tried:

import os
os.path.abspath(os.path.join(os.path.dirname(os.path.abspath(inspect.getfile(inspect.currentframe()))), os.pardir))

If you need binary mode, you'll need to do it the hard way:

s = File.open(filename, 'rb') { |f| f.read }

If not, shorter and sweeter is:

s = IO.read(filename)

    DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
    DocumentBuilder db = dbf.newDocumentBuilder();
    Document dom = db.parse("file.xml");
    Element docEle = dom.getDocumentElement();
    NodeList nl = docEle.getChildNodes();
    int length = nl.getLength();
    for (int i = 0; i < length; i++) {
        if (nl.item(i).getNodeType() == Node.ELEMENT_NODE) {
            Element el = (Element) nl.item(i);
            if (el.getNodeName().contains("staff")) {
                String name = el.getElementsByTagName("name").item(0).getTextContent();
                String phone = el.getElementsByTagName("phone").item(0).getTextContent();
                String email = el.getElementsByTagName("email").item(0).getTextContent();
                String area = el.getElementsByTagName("area").item(0).getTextContent();
                String city = el.getElementsByTagName("city").item(0).getTextContent();
            }
        }
    }

Iterate over all children and nl.item(i).getNodeType() == Node.ELEMENT_NODE is used to filter text nodes out. If there is nothing else in XML what remains are staff nodes.

For each node under stuff (name, phone, email, area, city)

 el.getElementsByTagName("name").item(0).getTextContent(); 

el.getElementsByTagName("name") will extract the "name" nodes under stuff, .item(0) will get you the first node and .getTextContent() will get the text content inside.

Edit: Since we have jackson I would do this in a different way. Define a pojo for the object:

public class Staff {
    private String name;
    private String phone;
    private String email;
    private String area;
    private String city;
...getters setters
}

Then using jackson:

    JsonNode root = new XmlMapper().readTree(xml.getBytes());
    ObjectMapper mapper = new ObjectMapper();
    root.forEach(node -> consume(node, mapper));



private void consume(JsonNode node, ObjectMapper mapper) {
    try {
        Staff staff = mapper.treeToValue(node, Staff.class);
        //TODO your job with staff
    } catch (JsonProcessingException e) {
        e.printStackTrace();
    }
}

I know the thread is already all, but as I was checking through I've come up with a solution (code listed below). Hope it can help.

#include <iostream>
#include <vector>

class Box
{
    public:

    static int BoxesTotal;
    static int BoxesEver;
    int Id;

    Box()
    {
        ++BoxesTotal;
        ++BoxesEver;
        Id = BoxesEver;
        std::cout << "Box (" << Id << "/" << BoxesTotal << "/" << BoxesEver << ") initialized." << std::endl;
    }

    ~Box()
    {
        std::cout << "Box (" << Id << "/" << BoxesTotal << "/" << BoxesEver << ") ended." << std::endl;
        --BoxesTotal;
    }

};

int Box::BoxesTotal = 0;
int Box::BoxesEver = 0;

int main(int argc, char* argv[])
{
    std::cout << "Objects (Boxes) example." << std::endl;
    std::cout << "------------------------" << std::endl;

    std::vector <Box*> BoxesTab;

    Box* Indicator;
    for (int i = 1; i<4; ++i)
    {
        std::cout << "i = " << i << ":" << std::endl;
        Box* Indicator = new(Box);
        BoxesTab.push_back(Indicator);
        std::cout << "Adres Blowera: " <<  BoxesTab[i-1] << std::endl;
    }

    std::cout << "Summary" << std::endl;
    std::cout << "-------" << std::endl;
    for (int i=0; i<3; ++i)
    {
        std::cout << "Adres Blowera: " <<  BoxesTab[i] << std::endl;
    }

    std::cout << "Deleting" << std::endl;
    std::cout << "--------" << std::endl;
    for (int i=0; i<3; ++i)
    {
        std::cout << "Deleting Box: " << i+1 << " (" <<  BoxesTab[i] << ") " << std::endl;
        Indicator = (BoxesTab[i]);
        delete(Indicator);
    }

    return 0;
}

And the result it produces is:

Objects (Boxes) example.
------------------------
i = 1:
Box (1/1/1) initialized.
Adres Blowera: 0xdf8ca0
i = 2:
Box (2/2/2) initialized.
Adres Blowera: 0xdf8ce0
i = 3:
Box (3/3/3) initialized.
Adres Blowera: 0xdf8cc0
Summary
-------
Adres Blowera: 0xdf8ca0
Adres Blowera: 0xdf8ce0
Adres Blowera: 0xdf8cc0
Deleting
--------
Deleting Box: 1 (0xdf8ca0) 
Box (1/3/3) ended.
Deleting Box: 2 (0xdf8ce0) 
Box (2/2/3) ended.
Deleting Box: 3 (0xdf8cc0) 
Box (3/1/3) ended.

I had this error message with boot2docker on windows with the docker-oracle-xe-11g image (https://registry.hub.docker.com/u/wnameless/oracle-xe-11g/).

The reason was that the virtual box disk was full (check with boot2docker.exe ssh df). Deleting old images and restarting the container solved the problem.

You can't, but you can use BETWEEN

SELECT job FROM mytable WHERE id BETWEEN 10 AND 15

Note that BETWEEN is inclusive, and will include items with both id 10 and 15.

If you do not want inclusion, you'll have to fall back to using the > and < operators.

SELECT job FROM mytable WHERE id > 10 AND id < 15

>>> import re
>>> string1 = "498results should get"
>>> int(re.search(r'\d+', string1).group())
498

If there are multiple integers in the string:

>>> map(int, re.findall(r'\d+', string1))
[498]

This is happening because there is no package cache in the image, you need to run:

apt-get -qq update

before installing packages, and if your command is in a Dockerfile, you'll then need:

apt-get -qq -y install curl

After that install ZSH and GIT Core:

apt-get install zsh
apt-get install git-core

Getting zsh to work in ubuntu is weird since sh does not understand the source command. So, you do this to install zsh:

wget https://github.com/robbyrussell/oh-my-zsh/raw/master/tools/install.sh -O - | zsh

and then you change your shell to zsh:

chsh -s `which zsh`

and then restart:

sudo shutdown -r 0

This problem is explained in depth in this issue.

I know the topic was asked some time ago, but recently I had faced similar issue and found yet another, but in my opinion a more complete solution. I decided to implement mechanism which provides conditional attributes to calculate validation results based on other properties values and relations between them, which are defined in logical expressions.

Using it you are able to achieve the result you asked about in the following manner:

[RequiredIf("MyProperty2 == null && MyProperty3 == false")]
public string MyProperty1 { get; set; }

[RequiredIf("MyProperty1 == null && MyProperty3 == false")]
public string MyProperty2 { get; set; }

[AssertThat("MyProperty1 != null || MyProperty2 != null || MyProperty3 == true")]
public bool MyProperty3 { get; set; }

More information about ExpressiveAnnotations library can be found here. It should simplify many declarative validation cases without the necessity of writing additional case-specific attributes or using imperative way of validation inside controllers.

You can use this as an example of your problem

    Map<Integer, String> map = new HashMap<>();
    map.put(10, "apple");
    map.put(20, "orange");
    map.put(30, "banana");
    map.put(40, "watermelon");
    map.put(50, "dragonfruit");

    // split a map into 2 List
    List<Integer> resultSortedKey = new ArrayList<>();
    List<String> resultValues = map.entrySet().stream()
            //sort a Map by key and stored in resultSortedKey
            .sorted(Map.Entry.<Integer, String>comparingByKey().reversed())
            .peek(e -> resultSortedKey.add(e.getKey()))
            .map(x -> x.getValue())
            // filter banana and return it to resultValues
            .filter(x -> !"banana".equalsIgnoreCase(x))
            .collect(Collectors.toList());

    resultSortedKey.forEach(System.out::println);
    resultValues.forEach(System.out::println);

Put an equal pixel padding for left and right:

<div id="artiststhumbnail" style="padding-left:ypx;padding-right:ypx">

Use BufferedReader, you can make it read from standard input like this:

BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
String line;

while ((line = stdin.readLine()) != null && line.length()!= 0) {
    String[] input = line.split(" ");
    if (input.length == 2) {
        System.out.println(calculateAnswer(input[0], input[1]));
    }
}

variable.isnumeric checks if a value is an integer:

 if myVariable.isnumeric:
    print('this varibale is numeric')
 else:
    print('not numeric')

Use .prop() instead and if we go with your code then compare like this:

Look at the example jsbin:

  $("#news_list tr").click(function () {
    var ele = $(this).find(':checkbox');
    if ($(':checked').length) {
      ele.prop('checked', false);
      $(this).removeClass('admin_checked');
    } else {
      ele.prop('checked', true);
      $(this).addClass('admin_checked');
    }
 });

Changes:

1. Changed input to :checkbox.
2. Comparing the length of the checked checkboxes.

If you need to open the DevTools press ctrl-shift-i.

If the DevTools window is already opened you can use the ctrl-shift-d shortcut; it switches the window into a detached mode.

For example in my case the electron application window (Chrome) is really small.

It's not possible to use any other suggestions except the ctrl-shift-d shortcut

You can adjust the plot margins with plot.margin in theme() and then move your axis labels and title with the vjust argument of element_text(). For example :

library(ggplot2)
library(grid)
qplot(rnorm(100)) +
    ggtitle("Title") +
    theme(axis.title.x=element_text(vjust=-2)) +
    theme(axis.title.y=element_text(angle=90, vjust=-0.5)) +
    theme(plot.title=element_text(size=15, vjust=3)) +
    theme(plot.margin = unit(c(1,1,1,1), "cm"))

will give you something like this :

If you want more informations about the different theme() parameters and their arguments, you can just enter ?theme at the R prompt.

If your DataFrame has values with the same type, you can also set return_counts=True in numpy.unique().

index, counts = np.unique(df.values,return_counts=True)

np.bincount() could be faster if your values are integers.

$('#' + catId).parent().remove('.subcatBtns');

This is my first post on SO, so I don't have enough reputation to comment the accepted answer, but I had to modify the code to the following:

export function focusNextElement () {
  //add all elements we want to include in our selection
  const focussableElements = 
    'a:not([disabled]), button:not([disabled]), input[type=text]:not([disabled])'
  if (document.activeElement && document.activeElement.form) {
      var focussable = Array.prototype.filter.call(
        document.activeElement.form.querySelectorAll(focussableElements),
      function (element) {
          // if element has tabindex = -1, it is not focussable
          if ( element.hasAttribute('tabindex') && element.tabIndex === -1 ){
            return false
          }
          //check for visibility while always include the current activeElement 
          return (element.offsetWidth > 0 || element.offsetHeight > 0 || 
            element === document.activeElement)
      });
      console.log(focussable)
      var index = focussable.indexOf(document.activeElement);
      if(index > -1) {
         var nextElement = focussable[index + 1] || focussable[0];
         console.log(nextElement)
         nextElement.focus()
      }                    
  }
}

The changing of var to constant is non-critical. The main change is that we get rid of the selector that checks tabindex != "-1". Then later, if the element has the attribute tabindex AND it is set to "-1", we do NOT consider it focussable.

The reason I needed to change this was because when adding tabindex="-1" to an <input>, this element was still considered focussable because it matches the "input[type=text]:not([disabled])" selector. My change is equivalent to "if we are a non-disabled text input, and we have a tabIndex attribute, and the value of that attribute is -1, then we should not be considered focussable.

I believe that when the author of the accepted answer edited their answer to account for the tabIndex attribute, they did not do so correctly. Please let me know if this is not the case

Yes, I can. Assume we need to track your system means In your system has more than one admin and subadmin, All of these can insert or update or edit any information.Later you need to know who make this change. For solving this problem you need serialize.

  **Explain:**Create a table named history which stores all changes. Each time there is a change insert a new row in this table. It might have this fields:

  history(id,target_table(name of the table), target_id (ID of the saved entry),create/edit/change data (serialized data of the saved row),date)

I hope this will help you.

It turns out this is actually possible, but not using the genuine Docker CE or EE version.

You can either use Red Hat's fork of docker with the '--add-registry' flag or you can build docker from source yourself with registry/config.go modified to use your own hard-coded default registry namespace/index.

In Bootstrap 4 it was renamed to .rounded-circle

Usage :

<div class="col-xs-7">
    <img src="img/gallery2.JPG" class="rounded-circle" alt="HelPic>
</div>

See migration docs from bootstrap.

They are formatting String. The Java specific syntax is given in java.util.Formatter.

The general syntax is as follows:

   %[argument_index$][flags][width][.precision]conversion

%02d performs decimal integer conversion d, formatted with zero padding (0 flag), with width 2. Thus, an int argument whose value is say 7, will be formatted into "07" as a String.

You may also see this formatting string in e.g. String.format.

Commonly used formats

These are just some commonly used formats and doesn't cover the syntax exhaustively.

Zero padding for numbers

System.out.printf("Agent %03d to the rescue!", 7);
// Agent 007 to the rescue!

Width for justification

You can use the - flag for left justification; otherwise it'll be right justification.

for (Map.Entry<Object,Object> prop : System.getProperties().entrySet()) {
    System.out.printf("%-30s : %50s%n", prop.getKey(), prop.getValue());
}

This prints something like:

java.version                   :                                 1.6.0_07
java.vm.name                   :               Java HotSpot(TM) Client VM
java.vm.vendor                 :                    Sun Microsystems Inc.
java.vm.specification.name     :       Java Virtual Machine Specification
java.runtime.name              :          Java(TM) SE Runtime Environment
java.vendor.url                :                     http://java.sun.com/

For more powerful message formatting, you can use java.text.MessageFormat. %n is the newline conversion (see below).

Hexadecimal conversion

System.out.println(Integer.toHexString(255));
// ff

System.out.printf("%d is %<08X", 255);
// 255 is 000000FF

Note that this also uses the < relative indexing (see below).

Floating point formatting

System.out.printf("%+,010.2f%n", 1234.567);
System.out.printf("%+,010.2f%n", -66.6666);
// +01,234.57
// -000066.67

For more powerful floating point formatting, use DecimalFormat instead.

%n for platform-specific line separator

System.out.printf("%s,%n%s%n", "Hello", "World");
// Hello,
// World

%% for an actual %-sign

System.out.printf("It's %s%% guaranteed!", 99.99);
// It's 99.99% guaranteed!

Note that the double literal 99.99 is autoboxed to Double, on which a string conversion using toString() is defined.

n$ for explicit argument indexing

System.out.printf("%1$s! %1$s %2$s! %1$s %2$s %3$s!",
    "Du", "hast", "mich"
);
// Du! Du hast! Du hast mich!

< for relative indexing

System.out.format("%s?! %<S?!?!?", "Who's your daddy");
// Who's your daddy?! WHO'S YOUR DADDY?!?!?

Related questions

• Why is String’s format(Object… args) defined as a static method?
• escaping formatting characters in java String.format
• Is it better practice to use String.format over string Concatenation in Java?
• Should I use Java’s String.format() if performance is important?
• Understanding the $ in Java’s format strings
• java decimal String format
• difference between system.out.printf and String.format
• What classes do you use to make string templates? -- MessageFormat with example

It's definitely an issue with some of the projects being built for x86 compatibility instead of any CPU. If I had to guess I would say that some of the references between your projects are probably referencing the dll's in some of the bin\debug folders instead of being project references.

When a project is compiled for x86 instead of 'Any CPU' the dll's go into the bin\x86\debug folder instead of bin\debug (which is probably where your references are looking).

But in any case, you should be using project references between your projects.

If you want a destructive backspace, you'll need something like

"\b \b"

i.e. a backspace, a space, and another backspace.

In Cocoa, to compare dates, use one of isEqualToDate, compare, laterDate, and earlierDate methods on NSDate objects, instantiated with the dates you need.

Documentation:
http://developer.apple.com/documentation/Cocoa/Reference/Foundation/Classes/NSDate_Class/Reference/Reference.html#//apple_ref/occ/instm/NSDate/isEqualToDate:
http://developer.apple.com/documentation/Cocoa/Reference/Foundation/Classes/NSDate_Class/Reference/Reference.html#//apple_ref/occ/instm/NSDate/earlierDate:
http://developer.apple.com/documentation/Cocoa/Reference/Foundation/Classes/NSDate_Class/Reference/Reference.html#//apple_ref/occ/instm/NSDate/laterDate:
http://developer.apple.com/documentation/Cocoa/Reference/Foundation/Classes/NSDate_Class/Reference/Reference.html#//apple_ref/occ/instm/NSDate/compare:

For Java SE 5: According to Garbage Collector Ergonomics [Oracle]:

initial heap size:

Larger of 1/64th of the machine's physical memory on the machine or some reasonable minimum. Before J2SE 5.0, the default initial heap size was a reasonable minimum, which varies by platform. You can override this default using the -Xms command-line option.

maximum heap size:

Smaller of 1/4th of the physical memory or 1GB. Before J2SE 5.0, the default maximum heap size was 64MB. You can override this default using the -Xmx command-line option.

UPDATE:

As pointed out by Tom Anderson in his comment, the above is for server-class machines. From Ergonomics in the 5.0 JavaTM Virtual Machine:

In the J2SE platform version 5.0 a class of machine referred to as a server-class machine has been defined as a machine with

• 2 or more physical processors
• 2 or more Gbytes of physical memory

with the exception of 32 bit platforms running a version of the Windows operating system. On all other platforms the default values are the same as the default values for version 1.4.2.

In the J2SE platform version 1.4.2 by default the following selections were made

• initial heap size of 4 Mbyte
• maximum heap size of 64 Mbyte

Less than or equal:

User.objects.filter(userprofile__level__lte=0)

Greater than or equal:

User.objects.filter(userprofile__level__gte=0)

Likewise, lt for less than and gt for greater than. You can find them all in the documentation.

I solved it in a very simple way writing this in the "order" part

ORDER BY (
sr.codice +0
)
ASC

This seems to work very well, in fact I had the following sorting:

16079   Customer X 
016082  Customer Y
16413   Customer Z

So the 0 in front of 16082 is considered correctly.

Yet another way is this:

You have a gnuplot script named scriptname.gp:

#!/usr/bin/gnuplot -p
# This code is in the file 'scriptname.gp'
EPATH = $0
FILENAME = $1 

plot FILENAME

Now you can call the gnuplot script scriptname.gp by this convoluted peace of syntax:

echo "call \"scriptname.gp\" \"'.'\" \"'data.dat'\"" | gnuplot 

Well you would need to get a file with JFileChooser and then read through the lines of the file using a scanner and the hasNext() function

http://docs.oracle.com/javase/7/docs/api/javax/swing/JFileChooser.html

once you do that you can save the line into a variable and manipulate the contents.

"" it seems you are trying to resolve this host , which is invalid.

Check for rss URL

Update Following are the possibilities

1 Your browser is configured with proxy, app not

System.setProperty("http.proxyHost", "my.proxyhost.com");
System.setProperty("http.proxyPort", "1234");

2 Your browser has access to internet. not app

3 can be an SSL issue if URL is secured

+ means a space only in application/x-www-form-urlencoded content, such as the query part of a URL:

http://www.example.com/path/foo+bar/path?query+name=query+value

In this URL, the parameter name is query name with a space and the value is query value with a space, but the folder name in the path is literally foo+bar, not foo bar.

%20 is a valid way to encode a space in either of these contexts. So if you need to URL-encode a string for inclusion in part of a URL, it is always safe to replace spaces with %20 and pluses with %2B. This is what eg. encodeURIComponent() does in JavaScript. Unfortunately it's not what urlencode does in PHP (rawurlencode is safer).

See Also HTML 4.01 Specification application/x-www-form-urlencoded

There is no difference.

The Java Software Development Kit (Java SDK) used to be called the Java Development Kit (JDK) before the marketing department at Sun got crazy with the "tm" and terminology. For political reasons & for sanity, they call the meaningful names (jdk) & versions (1.2 / 1.3 / 1.4 1.5 / 1.6) "engineering" terms. The marketing terms are "Java2 platform" (aka jdk 1.2 thru 1.4) or Java5 (aka jdk 1.5) or Java6 (aka jdk1.6). I'm getting a headache just thinking about it.