Most of the time prod mode is not needed during development time. So our workaround is to only enable it when it is NOT localhost.
In your browsers' main.ts
where you define your root AppModule:
const isLocal: boolean = /localhost/.test(document.location.host);
!isLocal && enableProdMode();
platformBrowserDynamic().bootstrapModule(AppModule);
The isLocal
can also be used for other purposes like enableTracing
for the RouterModule
for better debugging stack trace during dev phase.
Here is a simple solution to minimize changes to your code:
from datetime import datetime
import pytz
start_utc = datetime.utcnow()
print ("Time (UTC): %s" % start_utc.strftime("%d-%m-%Y %H:%M:%S"))
Time (UTC): 09-01-2021 03:49:03
tz = pytz.timezone('Africa/Cairo')
start_tz = datetime.now().astimezone(tz)
print ("Time (RSA): %s" % start_tz.strftime("%d-%m-%Y %H:%M:%S"))
Time (RSA): 09-01-2021 05:49:03
if (Build.VERSION.SDK_INT >= 24) {
Html.fromHtml(String, flag) // for 24 API and more
} else {
Html.fromHtml(String) // or for older API
}
for 24 API and more (flag)
public static final int FROM_HTML_MODE_COMPACT = 63;
public static final int FROM_HTML_MODE_LEGACY = 0;
public static final int FROM_HTML_OPTION_USE_CSS_COLORS = 256;
public static final int FROM_HTML_SEPARATOR_LINE_BREAK_BLOCKQUOTE = 32;
public static final int FROM_HTML_SEPARATOR_LINE_BREAK_DIV = 16;
public static final int FROM_HTML_SEPARATOR_LINE_BREAK_HEADING = 2;
public static final int FROM_HTML_SEPARATOR_LINE_BREAK_LIST = 8;
public static final int FROM_HTML_SEPARATOR_LINE_BREAK_LIST_ITEM = 4;
public static final int FROM_HTML_SEPARATOR_LINE_BREAK_PARAGRAPH = 1;
public static final int TO_HTML_PARAGRAPH_LINES_CONSECUTIVE = 0;
public static final int TO_HTML_PARAGRAPH_LINES_INDIVIDUAL = 1;
Update: The GSOC project and the code there isn't active, but this is: https://github.com/hierynomus/sshj
hierynomus took over as maintainer since early 2015. Here is the older, no longer maintained, Github link:
https://github.com/shikhar/sshj
There was a GSOC project:
http://code.google.com/p/commons-net-ssh/
Code quality seem to be better than JSch, which, while a complete and working implementation, lacks documentation. Project page spots an upcoming beta release, last commit to the repository was mid-august.
Compare the APIs:
http://code.google.com/p/commons-net-ssh/
SSHClient ssh = new SSHClient();
//ssh.useCompression();
ssh.loadKnownHosts();
ssh.connect("localhost");
try {
ssh.authPublickey(System.getProperty("user.name"));
new SCPDownloadClient(ssh).copy("ten", "/tmp");
} finally {
ssh.disconnect();
}
Session session = null;
Channel channel = null;
try {
JSch jsch = new JSch();
session = jsch.getSession(username, host, 22);
java.util.Properties config = new java.util.Properties();
config.put("StrictHostKeyChecking", "no");
session.setConfig(config);
session.setPassword(password);
session.connect();
// exec 'scp -f rfile' remotely
String command = "scp -f " + remoteFilename;
channel = session.openChannel("exec");
((ChannelExec) channel).setCommand(command);
// get I/O streams for remote scp
OutputStream out = channel.getOutputStream();
InputStream in = channel.getInputStream();
channel.connect();
byte[] buf = new byte[1024];
// send '\0'
buf[0] = 0;
out.write(buf, 0, 1);
out.flush();
while (true) {
int c = checkAck(in);
if (c != 'C') {
break;
}
// read '0644 '
in.read(buf, 0, 5);
long filesize = 0L;
while (true) {
if (in.read(buf, 0, 1) < 0) {
// error
break;
}
if (buf[0] == ' ') {
break;
}
filesize = filesize * 10L + (long) (buf[0] - '0');
}
String file = null;
for (int i = 0;; i++) {
in.read(buf, i, 1);
if (buf[i] == (byte) 0x0a) {
file = new String(buf, 0, i);
break;
}
}
// send '\0'
buf[0] = 0;
out.write(buf, 0, 1);
out.flush();
// read a content of lfile
FileOutputStream fos = null;
fos = new FileOutputStream(localFilename);
int foo;
while (true) {
if (buf.length < filesize) {
foo = buf.length;
} else {
foo = (int) filesize;
}
foo = in.read(buf, 0, foo);
if (foo < 0) {
// error
break;
}
fos.write(buf, 0, foo);
filesize -= foo;
if (filesize == 0L) {
break;
}
}
fos.close();
fos = null;
if (checkAck(in) != 0) {
System.exit(0);
}
// send '\0'
buf[0] = 0;
out.write(buf, 0, 1);
out.flush();
channel.disconnect();
session.disconnect();
}
} catch (JSchException jsche) {
System.err.println(jsche.getLocalizedMessage());
} catch (IOException ioe) {
System.err.println(ioe.getLocalizedMessage());
} finally {
channel.disconnect();
session.disconnect();
}
}
Using ng-selected for selected value. I Have successfully implemented code in AngularJS v1.3.2
<select ng-model="objBillingAddress.StateId" >_x000D_
<option data-ng-repeat="c in States" value="{{c.StateId}}" ng-selected="objBillingAddress.BillingStateId==c.StateId">{{c.StateName}}</option>_x000D_
</select>
_x000D_
A simple way can be:
import os
current_dir = os.path.abspath(os.path.dirname(__file__))
parent_dir = os.path.abspath(current_dir + "/../")
print parent_dir
Have you tried using the "auto-fill" in Excel?
If you have an entire column of items you put the formula in the first cell, make sure you get the result you desire and then you can do the copy/paste, or use auto fill which is an option that sits on the bottom right corner of the cell.
You go to that corner in the cell and once your cursor changes to a "+", you can double-click on it and it should populate all the way down to the last entry (as long as there are no populated cells, that is).
Make sure that you have compiled your *.cs file before browsing the ASPX page.
Have you enabled multidexing?. Do extend your main Application class with MultiDexApplication. I have got additional exception mesage before the error. They are as follows.
Uncaught translation error: java.util.concurrent.ExecutionException: java.lang.OutOfMemoryError: GC overhead limit exceeded
Uncaught translation error: java.util.concurrent.ExecutionException: java.lang.OutOfMemoryError: Java heap space
2 errors; aborting
This clearly tells that the error occurred due to out of memory. Try the following:
This will do the trick ;)
You can do this through a regular UPDATE
with a JOIN
UPDATE T1
SET Description = T2.Description
FROM Table1 T1
JOIN Table2 T2
ON T2.ID = T1.DescriptionId
In 2019, I think git branch --show-current
is a better command than the accepted answer.
$ git branch --show-current
master
(Added in git 2.22 release in June 2019)
It runs much faster as it doesn't need to iterate through all branches. Similarly git branch
should be avoided too in the command prompt as it slows down your prompt if you have many local branches.
Put it in a function to use anywhere on command prompt:
# This function returns '' in all below cases:
# - git not installed or command not found
# - not in a git repo
# - in a git repo but not on a branch (HEAD detached)
get_git_current_branch() {
git branch --show-current 2> /dev/null
}
More context:
$ git version
git version 2.23.0
To copy a folder file from local to hdfs, you can the below command
hadoop fs -put /path/localpath /path/hdfspath
or
hadoop fs -copyFromLocal /path/localpath /path/hdfspath
As noted in the comments, there are some things to try: gc.collect
(@EdChum) may clear stuff, for example. At least from my experience, these things sometimes work and often don't.
There is one thing that always works, however, because it is done at the OS, not language, level.
Suppose you have a function that creates an intermediate huge DataFrame, and returns a smaller result (which might also be a DataFrame):
def huge_intermediate_calc(something):
...
huge_df = pd.DataFrame(...)
...
return some_aggregate
Then if you do something like
import multiprocessing
result = multiprocessing.Pool(1).map(huge_intermediate_calc, [something_])[0]
Then the function is executed at a different process. When that process completes, the OS retakes all the resources it used. There's really nothing Python, pandas, the garbage collector, could do to stop that.
For example Tomcat (default) expects:
spring.datasource.ourdb.url=...
and HikariCP will be happy with:
spring.datasource.ourdb.jdbc-url=...
We can satisfy both without boilerplate configuration:
spring.datasource.ourdb.jdbc-url=${spring.datasource.ourdb.url}
Take a look at source DataSourceBuilder.java
If Tomcat, HikariCP or Commons DBCP are on the classpath one of them will be selected (in that order with Tomcat first).
... so, we can easily replace connection pool provider using this maven configuration (pom.xml):
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-jdbc</artifactId>
<exclusions>
<exclusion>
<groupId>org.apache.tomcat</groupId>
<artifactId>tomcat-jdbc</artifactId>
</exclusion>
</exclusions>
</dependency>
<dependency>
<groupId>com.zaxxer</groupId>
<artifactId>HikariCP</artifactId>
</dependency>
The 1st one is default, when there is nothing special to return or write. 2nd and 3rd are basically the same where 3rd is a bit more expanded version of 2nd
This should center the image and make it responsive.
<img src="..." class="img-responsive" style="margin:0 auto;"/>
This error occurs when you are sending JSON data to server. Maybe in your string you are trying to add new line character by using /n.
If you add / before /n, it should work, you need to escape new line character.
"Hello there //n start coding"
The result should be as following
Hello there
start coding
This d = t.getElementsByTagName("tr")
and this r = d.getElementsByTagName("td")
are both arrays
. The getElementsByTagName
returns an collection of elements even if there's just one found on your match.
So you have to use like this:
var t = document.getElementById("table"), // This have to be the ID of your table, not the tag
d = t.getElementsByTagName("tr")[0],
r = d.getElementsByTagName("td")[0];
Place the index of the array as you want to access the objects.
Note that getElementById
as the name says just get the element with matched id, so your table have to be like <table id='table'>
and getElementsByTagName
gets by the tag.
EDIT:
Well, continuing this post, I think you can do this:
var t = document.getElementById("table");
var trs = t.getElementsByTagName("tr");
var tds = null;
for (var i=0; i<trs.length; i++)
{
tds = trs[i].getElementsByTagName("td");
for (var n=0; n<tds.length;n++)
{
tds[n].onclick=function() { alert(this.innerHTML); }
}
}
Try it!
Simple? Yup.
If you multiply two large prime numbers, you get a huge non-prime number with only two (large) prime factors.
Factoring that number is a non-trivial operation, and that fact is the source of a lot of Cryptographic algorithms. See one-way functions for more information.
Addendum: Just a bit more explanation. The product of the two prime numbers can be used as a public key, while the primes themselves as a private key. Any operation done to data that can only be undone by knowing one of the two factors will be non-trivial to unencrypt.
I think the problem is the realpath of the file. For example your script is working on './', your file is inside the directory './xml'. So better check if the file exists or not, before you get filemtime or unlink it:
function deleteOldFiles(){
if ($handle = opendir('./xml')) {
while (false !== ($file = readdir($handle))) {
if(preg_match("/^.*\.(xml|xsl)$/i", $file)){
$fpath = 'xml/'.$file;
if (file_exists($fpath)) {
$filelastmodified = filemtime($fpath);
if ( (time() - $filelastmodified ) > 24*3600){
unlink($fpath);
}
}
}
}
closedir($handle);
}
}
On your project folder, open up the bin\Debug subfolder and you'll see the compiled result.
If you want to log to the same file:
command1 >> log_file 2>&1
If you want different files:
command1 >> log_file 2>> err_file
response_json = ("{ \"response_json\":" + str(list_of_dict)+ "}").replace("\'","\"")
response_json = json.dumps(response_json)
response_json = json.loads(response_json)
I am not sure but the URL is added by a browser when you want to print. It is not part of the page so can not be affected by CSS. Maybe there is a way but it will be browser dependent.
This is what worked for me:
brew update
brew install openssl
ln -s /usr/local/opt/openssl/lib/libcrypto.1.0.0.dylib /usr/local/lib/
ln -s /usr/local/opt/openssl/lib/libssl.1.0.0.dylib /usr/local/lib/
ln -s /usr/local/Cellar/openssl/1.0.2j/bin/openssl /usr/local/bin/openssl
Thanks to @dorlandode on this thread https://github.com/Homebrew/brew/pull/597
NB: I only used this as a temporary fix until I could spend time correctly installing Openssl again from scratch. As I remember I spent best part of a day debugging and having issues before I realised the best way was to manually install the certs I needed one by one. Please read the link in @bouke's comment before attempting this.
In my case, the problem was that my POST request was sent to the same url as GET (with get parameters using "?..=..") and that parameters had the same name as form parameters. Probably Spring is merging them into an array and parsing was throwing error.
I would achieve it in a one-liner as shown below:
using System;
using System.Collections;
namespace stackoverflowQuestions
{
class Program
{
static void Main(string[] args)
{
//get bit Array for number 20
var myBitArray = new BitArray(BitConverter.GetBytes(20));
}
}
}
Please note that every element of a BitArray
is stored as bool as shown in below snapshot:
So below code works:
if (myBitArray[0] == false)
{
//this code block will execute
}
but below code doesn't compile at all:
if (myBitArray[0] == 0)
{
//some code
}
Update: created a js fiddle here to see it live: http://jsfiddle.net/HFMvX/
I went through tons of google searches and didn't find anything satisfying. i like how passpack have done it so essentially reverse-engineered their approach, here we go:
function scorePassword(pass) {
var score = 0;
if (!pass)
return score;
// award every unique letter until 5 repetitions
var letters = new Object();
for (var i=0; i<pass.length; i++) {
letters[pass[i]] = (letters[pass[i]] || 0) + 1;
score += 5.0 / letters[pass[i]];
}
// bonus points for mixing it up
var variations = {
digits: /\d/.test(pass),
lower: /[a-z]/.test(pass),
upper: /[A-Z]/.test(pass),
nonWords: /\W/.test(pass),
}
var variationCount = 0;
for (var check in variations) {
variationCount += (variations[check] == true) ? 1 : 0;
}
score += (variationCount - 1) * 10;
return parseInt(score);
}
Good passwords start to score around 60 or so, here's function to translate that in words:
function checkPassStrength(pass) {
var score = scorePassword(pass);
if (score > 80)
return "strong";
if (score > 60)
return "good";
if (score >= 30)
return "weak";
return "";
}
you might want to tune this a bit but i found it working for me nicely
Because I don't like to have duplicate files (log4j.properties in test and main), and I have quite many test classes, they each runwith SpringJUnit4ClassRunner class, so I have to customize it. This is what I use:
import java.io.FileNotFoundException;
import org.junit.runners.model.InitializationError;
import org.springframework.test.context.junit4.SpringJUnit4ClassRunner;
import org.springframework.util.Log4jConfigurer;
public class MySpringJUnit4ClassRunner extends SpringJUnit4ClassRunner {
static {
String log4jLocation = "classpath:log4j-oops.properties";
try {
Log4jConfigurer.initLogging(log4jLocation);
} catch (FileNotFoundException ex) {
System.err.println("Cannot Initialize log4j at location: " + log4jLocation);
}
}
public MySpringJUnit4ClassRunner(Class<?> clazz) throws InitializationError {
super(clazz);
}
}
When you use it, replace SpringJUnit4ClassRunner with MySpringJUnit4ClassRunner
@RunWith(MySpringJUnit4ClassRunner.class)
@ContextConfiguration("classpath:conf/applicationContext.xml")
public class TestOrderController {
private Logger LOG = LoggerFactory.getLogger(this.getClass());
private MockMvc mockMvc;
...
}
Differences:
The return type of RenderPartial
is void
, where as Partial
returns MvcHtmlString
Syntax for invoking Partial()
and RenderPartial()
methods in Razor views
@Html.Partial("PartialViewName")
@{ Html.RenderPartial("PartialViewName"); }
Syntax for invoking Partial()
and RenderPartial()
methods in webform views
[%: Html.Partial("PartialViewName") %]
[% Html.RenderPartial("PartialViewName"); %]
The following are the 2 common interview questions related to Partial()
and RenderPartial()
When would you use Partial()
over RenderPartial()
and vice versa?
The main difference is that RenderPartial()
returns void and the output will be written directly to the output stream, where as the Partial()
method returns MvcHtmlString
, which can be assigned to a variable and manipulate it if required. So, when there is a need to assign the output to a variable for manipulating it, then use Partial(), else use RenderPartial().
Which one is better for performance?
From a performance perspective, rendering directly to the output stream is better. RenderPartial()
does exactly the same thing and is better for performance over Partial()
.
You can do something like this:
jQuery.fn.existsWithValue = function() {
return this.length && this.val().length;
}
if ($(selector).existsWithValue()) {
// Do something
}
setTimeout is part of the DOM defined by WHAT WG.
https://html.spec.whatwg.org/multipage/timers-and-user-prompts.html
The method you want is:—
handle = self.setTimeout( handler [, timeout [, arguments... ] ] )
Schedules a timeout to run handler after timeout milliseconds. Any arguments are passed straight through to the handler.
setTimeout(postinsql, 4000, topicId);
Apparently, extra arguments are supported in IE10. Alternatively, you can use setTimeout(postinsql.bind(null, topicId), 4000);
, however passing extra arguments is simpler, and that's preferable.
Historical factoid: In days of VBScript, in JScript, setTimeout's third parameter was the language, as a string, defaulting to "JScript" but with the option to use "VBScript". https://docs.microsoft.com/en-us/previous-versions/windows/internet-explorer/ie-developer/platform-apis/aa741500(v%3Dvs.85)
You can also create a directive that runs your code in the link function.
Current method is to use:
npm install --save-dev babel-cli babel-preset-env
And then in in .babelrc
{
"presets": ["env"]
}
this install Babel support for latest version of js (es2015 and beyond) Check out babeljs
Do not forget to add babel-node
to your scripts inside package.json
use when running your js file as follows.
"scripts": {
"test": "mocha",
//Add this line to your scripts
"populate": "node_modules/babel-cli/bin/babel-node.js"
},
Now you can npm populate yourfile.js
inside terminal.
If you are running windows and running error internal or external command not recognized, use node infront of the script as follow
node node_modules/babel-cli/bin/babel-node.js
Then npm run populate
Sounds like you're expecting size_t
to be the same as unsigned long
(possibly 64 bits) when it's actually an unsigned int
(32 bits). Try using %zu
in both cases.
I'm not entirely certain though.
In build.gradle(Module:app) add this code
dependencies {
……..
compile 'com.google.android.gms:play-services:10.0.1’
……
}
If you still have a problem after that, then add this code in build.gradle(Module:app)
defaultConfig {
….
…...
multiDexEnabled true
}
dependencies {
…..
compile 'com.google.android.gms:play-services:10.0.1'
compile 'com.android.support:multidex:1.0.1'
}
Mr.Iam4fun your code answer here..You will use thread...
findViewById(R.id.download).setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View v) {
new Thread(new Runnable() {
public void run() {
DownloadFiles();
}
}).start();
And,then..
public void DownloadFiles(){
try {
URL u = new URL("http://www.qwikisoft.com/demo/ashade/20001.kml");
InputStream is = u.openStream();
DataInputStream dis = new DataInputStream(is);
byte[] buffer = new byte[1024];
int length;
FileOutputStream fos = new FileOutputStream(new File(Environment.getExternalStorageDirectory() + "/" + "data/test.kml"));
while ((length = dis.read(buffer))>0) {
fos.write(buffer, 0, length);
}
} catch (MalformedURLException mue) {
Log.e("SYNC getUpdate", "malformed url error", mue);
} catch (IOException ioe) {
Log.e("SYNC getUpdate", "io error", ioe);
} catch (SecurityException se) {
Log.e("SYNC getUpdate", "security error", se);
}
}
}
Sure, it will be working..
I wrote my URL (actually IRI, internationalized) pattern to comply with RFC 3987 (http://www.faqs.org/rfcs/rfc3987.html). These are in PCRE syntax.
For absolute IRIs (internationalized):
/^[a-z](?:[-a-z0-9\+\.])*:(?:\/\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:])*@)?(?:\[(?:(?:(?:[0-9a-f]{1,4}:){6}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|::(?:[0-9a-f]{1,4}:){5}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){4}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,1}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){3}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,2}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){2}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,3}[0-9a-f]{1,4})?::[0-9a-f]{1,4}:(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,4}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,5}[0-9a-f]{1,4})?::[0-9a-f]{1,4}|(?:(?:[0-9a-f]{1,4}:){0,6}[0-9a-f]{1,4})?::)|v[0-9a-f]+\.[-a-z0-9\._~!\$&'\(\)\*\+,;=:]+)\]|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3}|(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=])*)(?::[0-9]*)?(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*|\/(?:(?:(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))+)(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*)?|(?:(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))+)(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*|(?!(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])))(?:\?(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])|[\x{E000}-\x{F8FF}\x{F0000}-\x{FFFFD}\x{100000}-\x{10FFFD}\/\?])*)?(?:\#(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])|[\/\?])*)?$/i
To also allow relative IRIs:
/^(?:[a-z](?:[-a-z0-9\+\.])*:(?:\/\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:])*@)?(?:\[(?:(?:(?:[0-9a-f]{1,4}:){6}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|::(?:[0-9a-f]{1,4}:){5}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){4}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,1}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){3}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,2}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){2}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,3}[0-9a-f]{1,4})?::[0-9a-f]{1,4}:(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,4}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,5}[0-9a-f]{1,4})?::[0-9a-f]{1,4}|(?:(?:[0-9a-f]{1,4}:){0,6}[0-9a-f]{1,4})?::)|v[0-9a-f]+\.[-a-z0-9\._~!\$&'\(\)\*\+,;=:]+)\]|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3}|(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=])*)(?::[0-9]*)?(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*|\/(?:(?:(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))+)(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*)?|(?:(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))+)(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*|(?!(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])))(?:\?(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])|[\x{E000}-\x{F8FF}\x{F0000}-\x{FFFFD}\x{100000}-\x{10FFFD}\/\?])*)?(?:\#(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])|[\/\?])*)?|(?:\/\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:])*@)?(?:\[(?:(?:(?:[0-9a-f]{1,4}:){6}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|::(?:[0-9a-f]{1,4}:){5}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){4}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,1}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){3}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,2}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:){2}(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,3}[0-9a-f]{1,4})?::[0-9a-f]{1,4}:(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,4}[0-9a-f]{1,4})?::(?:[0-9a-f]{1,4}:[0-9a-f]{1,4}|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3})|(?:(?:[0-9a-f]{1,4}:){0,5}[0-9a-f]{1,4})?::[0-9a-f]{1,4}|(?:(?:[0-9a-f]{1,4}:){0,6}[0-9a-f]{1,4})?::)|v[0-9a-f]+\.[-a-z0-9\._~!\$&'\(\)\*\+,;=:]+)\]|(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(?:\.(?:[0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3}|(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=])*)(?::[0-9]*)?(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*|\/(?:(?:(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))+)(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*)?|(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=@])+)(?:\/(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@]))*)*|(?!(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])))(?:\?(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])|[\x{E000}-\x{F8FF}\x{F0000}-\x{FFFFD}\x{100000}-\x{10FFFD}\/\?])*)?(?:\#(?:(?:%[0-9a-f][0-9a-f]|[-a-z0-9\._~\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}!\$&'\(\)\*\+,;=:@])|[\/\?])*)?)$/i
How they were compiled (in PHP):
<?php
/* Regex convenience functions (character class, non-capturing group) */
function cc($str, $suffix = '', $negate = false) {
return '[' . ($negate ? '^' : '') . $str . ']' . $suffix;
}
function ncg($str, $suffix = '') {
return '(?:' . $str . ')' . $suffix;
}
/* Preserved from RFC3986 */
$ALPHA = 'a-z';
$DIGIT = '0-9';
$HEXDIG = $DIGIT . 'a-f';
$sub_delims = '!\\$&\'\\(\\)\\*\\+,;=';
$gen_delims = ':\\/\\?\\#\\[\\]@';
$reserved = $gen_delims . $sub_delims;
$unreserved = '-' . $ALPHA . $DIGIT . '\\._~';
$pct_encoded = '%' . cc($HEXDIG) . cc($HEXDIG);
$dec_octet = ncg(implode('|', array(
cc($DIGIT),
cc('1-9') . cc($DIGIT),
'1' . cc($DIGIT) . cc($DIGIT),
'2' . cc('0-4') . cc($DIGIT),
'25' . cc('0-5')
)));
$IPv4address = $dec_octet . ncg('\\.' . $dec_octet, '{3}');
$h16 = cc($HEXDIG, '{1,4}');
$ls32 = ncg($h16 . ':' . $h16 . '|' . $IPv4address);
$IPv6address = ncg(implode('|', array(
ncg($h16 . ':', '{6}') . $ls32,
'::' . ncg($h16 . ':', '{5}') . $ls32,
ncg($h16, '?') . '::' . ncg($h16 . ':', '{4}') . $ls32,
ncg($h16 . ':' . $h16, '?') . '::' . ncg($h16 . ':', '{3}') . $ls32,
ncg(ncg($h16 . ':', '{0,2}') . $h16, '?') . '::' . ncg($h16 . ':', '{2}') . $ls32,
ncg(ncg($h16 . ':', '{0,3}') . $h16, '?') . '::' . $h16 . ':' . $ls32,
ncg(ncg($h16 . ':', '{0,4}') . $h16, '?') . '::' . $ls32,
ncg(ncg($h16 . ':', '{0,5}') . $h16, '?') . '::' . $h16,
ncg(ncg($h16 . ':', '{0,6}') . $h16, '?') . '::',
)));
$IPvFuture = 'v' . cc($HEXDIG, '+') . cc($unreserved . $sub_delims . ':', '+');
$IP_literal = '\\[' . ncg(implode('|', array($IPv6address, $IPvFuture))) . '\\]';
$port = cc($DIGIT, '*');
$scheme = cc($ALPHA) . ncg(cc('-' . $ALPHA . $DIGIT . '\\+\\.'), '*');
/* New or changed in RFC3987 */
$iprivate = '\x{E000}-\x{F8FF}\x{F0000}-\x{FFFFD}\x{100000}-\x{10FFFD}';
$ucschar = '\x{A0}-\x{D7FF}\x{F900}-\x{FDCF}\x{FDF0}-\x{FFEF}' .
'\x{10000}-\x{1FFFD}\x{20000}-\x{2FFFD}\x{30000}-\x{3FFFD}' .
'\x{40000}-\x{4FFFD}\x{50000}-\x{5FFFD}\x{60000}-\x{6FFFD}' .
'\x{70000}-\x{7FFFD}\x{80000}-\x{8FFFD}\x{90000}-\x{9FFFD}' .
'\x{A0000}-\x{AFFFD}\x{B0000}-\x{BFFFD}\x{C0000}-\x{CFFFD}' .
'\x{D0000}-\x{DFFFD}\x{E1000}-\x{EFFFD}';
$iunreserved = '-' . $ALPHA . $DIGIT . '\\._~' . $ucschar;
$ipchar = ncg($pct_encoded . '|' . cc($iunreserved . $sub_delims . ':@'));
$ifragment = ncg($ipchar . '|' . cc('\\/\\?'), '*');
$iquery = ncg($ipchar . '|' . cc($iprivate . '\\/\\?'), '*');
$isegment_nz_nc = ncg($pct_encoded . '|' . cc($iunreserved . $sub_delims . '@'), '+');
$isegment_nz = ncg($ipchar, '+');
$isegment = ncg($ipchar, '*');
$ipath_empty = '(?!' . $ipchar . ')';
$ipath_rootless = ncg($isegment_nz) . ncg('\\/' . $isegment, '*');
$ipath_noscheme = ncg($isegment_nz_nc) . ncg('\\/' . $isegment, '*');
$ipath_absolute = '\\/' . ncg($ipath_rootless, '?'); // Spec says isegment-nz *( "/" isegment )
$ipath_abempty = ncg('\\/' . $isegment, '*');
$ipath = ncg(implode('|', array(
$ipath_abempty,
$ipath_absolute,
$ipath_noscheme,
$ipath_rootless,
$ipath_empty
))) . ')';
$ireg_name = ncg($pct_encoded . '|' . cc($iunreserved . $sub_delims . '@'), '*');
$ihost = ncg(implode('|', array($IP_literal, $IPv4address, $ireg_name)));
$iuserinfo = ncg($pct_encoded . '|' . cc($iunreserved . $sub_delims . ':'), '*');
$iauthority = ncg($iuserinfo . '@', '?') . $ihost . ncg(':' . $port, '?');
$irelative_part = ncg(implode('|', array(
'\\/\\/' . $iauthority . $ipath_abempty . '',
'' . $ipath_absolute . '',
'' . $ipath_noscheme . '',
'' . $ipath_empty . ''
)));
$irelative_ref = $irelative_part . ncg('\\?' . $iquery, '?') . ncg('\\#' . $ifragment, '?');
$ihier_part = ncg(implode('|', array(
'\\/\\/' . $iauthority . $ipath_abempty . '',
'' . $ipath_absolute . '',
'' . $ipath_rootless . '',
'' . $ipath_empty . ''
)));
$absolute_IRI = $scheme . ':' . $ihier_part . ncg('\\?' . $iquery, '?');
$IRI = $scheme . ':' . $ihier_part . ncg('\\?' . $iquery, '?') . ncg('\\#' . $ifragment, '?');
$IRI_reference = ncg($IRI . '|' . $irelative_ref);
Edit 7 March 2011: Because of the way PHP handles backslashes in quoted strings, these are unusable by default. You'll need to double-escape backslashes except where the backslash has a special meaning in regex. You can do that this way:
$escape_backslash = '/(?<!\\)\\(?![\[\]\\\^\$\.\|\*\+\(\)QEnrtaefvdwsDWSbAZzB1-9GX]|x\{[0-9a-f]{1,4}\}|\c[A-Z]|)/';
$absolute_IRI = preg_replace($escape_backslash, '\\\\', $absolute_IRI);
$IRI = preg_replace($escape_backslash, '\\\\', $IRI);
$IRI_reference = preg_replace($escape_backslash, '\\\\', $IRI_reference);
Another possible solution is that the project name is not acceptable. For example, creating a project with spaces in the name does not block the project creation but the proper sources are not marked and when those are marked manually, I still was unable to create classes. Recreating the project with hyphens (-) instead of spaces corrected the problem for me.
Here's a trimmed down ECMAScript 6 version:
const convert = {
bin2dec : s => parseInt(s, 2).toString(10),
bin2hex : s => parseInt(s, 2).toString(16),
dec2bin : s => parseInt(s, 10).toString(2),
dec2hex : s => parseInt(s, 10).toString(16),
hex2bin : s => parseInt(s, 16).toString(2),
hex2dec : s => parseInt(s, 16).toString(10)
};
convert.bin2dec('111'); // '7'
convert.dec2hex('42'); // '2a'
convert.hex2bin('f8'); // '11111000'
convert.dec2bin('22'); // '10110'
Create your shell script as login.sh
in your $HOME folder.
Paste the following one-line script into Script Editor:
do shell script "$HOME/login.sh"
Then save it as an application.
Finally add the application to your login items.
If you want to make the script output visual, you can swap step 2 for this:
tell application "Terminal"
activate
do script "$HOME/login.sh"
end tell
If multiple commands are needed something like this can be used:
tell application "Terminal"
activate
do script "cd $HOME"
do script "./login.sh" in window 1
end tell
You could use the Array.reduce
method:
const myData = [_x000D_
['2013-01-22', 0], ['2013-01-29', 0], ['2013-02-05', 0],_x000D_
['2013-02-12', 0], ['2013-02-19', 0], ['2013-02-26', 0], _x000D_
['2013-03-05', 0], ['2013-03-12', 0], ['2013-03-19', 0], _x000D_
['2013-03-26', 0], ['2013-04-02', 21], ['2013-04-09', 2]_x000D_
];_x000D_
const sum = myData_x000D_
.map( v => v[1] ) _x000D_
.reduce( (sum, current) => sum + current, 0 );_x000D_
_x000D_
console.log(sum);
_x000D_
See MDN
This is what may be happening, if the value of item.photo
is undefined then item.photo != ''
will always show as true. And if you think logically it actually makes sense, item.photo
is not an empty string (so this condition comes true) since it is undefined
.
Now for people who are trying to check if the value of input is empty or not in Angular 6, can go by this approach.
Lets say this is the input field -
<input type="number" id="myTextBox" name="myTextBox"_x000D_
[(ngModel)]="response.myTextBox"_x000D_
#myTextBox="ngModel">
_x000D_
To check if the field is empty or not this should be the script.
<div *ngIf="!myTextBox.value" style="color:red;">_x000D_
Your field is empty_x000D_
</div>
_x000D_
Do note the subtle difference between the above answer and this answer. I have added an additional attribute .value
after my input name myTextBox
.
I don't know if the above answer worked for above version of Angular, but for Angular 6 this is how it should be done.
Above answers were helpful, but for unknown reasons they did not seem to work. So if you have already installed MySql workbench on your system, instead of downloading the jar files and struggling with the correct version just go to
C:\Program Files (x86)\MySQL\Connector J 8.0
and copy mysql-connector-java-8.0.12
(does not matter what version it is) the jar file in that location and paste it to C:\Program Files\pentaho\design-tools\data-integration\lib
You have at least two issues in your code:
ng-change="getScoreData(Score)
Angular doesn't see getScoreData
method that refers to defined service
getScoreData: function (Score, callback)
We don't need to use callback since GET
returns promise. Use then
instead.
Here is a working example (I used random address only for simulation):
HTML
<select ng-model="score"
ng-change="getScoreData(score)"
ng-options="score as score.name for score in scores"></select>
<pre>{{ScoreData|json}}</pre>
JS
var fessmodule = angular.module('myModule', ['ngResource']);
fessmodule.controller('fessCntrl', function($scope, ScoreDataService) {
$scope.scores = [{
name: 'Bukit Batok Street 1',
URL: 'http://maps.googleapis.com/maps/api/geocode/json?address=Singapore, SG, Singapore, 153 Bukit Batok Street 1&sensor=true'
}, {
name: 'London 8',
URL: 'http://maps.googleapis.com/maps/api/geocode/json?address=Singapore, SG, Singapore, London 8&sensor=true'
}];
$scope.getScoreData = function(score) {
ScoreDataService.getScoreData(score).then(function(result) {
$scope.ScoreData = result;
}, function(result) {
alert("Error: No data returned");
});
};
});
fessmodule.$inject = ['$scope', 'ScoreDataService'];
fessmodule.factory('ScoreDataService', ['$http', '$q', function($http) {
var factory = {
getScoreData: function(score) {
console.log(score);
var data = $http({
method: 'GET',
url: score.URL
});
return data;
}
}
return factory;
}]);
Demo Fiddle
If you are using pdb, you can define aliases for shortcuts. I use these:
# Ned's .pdbrc
# Print a dictionary, sorted. %1 is the dict, %2 is the prefix for the names.
alias p_ for k in sorted(%1.keys()): print "%s%-15s= %-80.80s" % ("%2",k,repr(%1[k]))
# Print the instance variables of a thing.
alias pi p_ %1.__dict__ %1.
# Print the instance variables of self.
alias ps pi self
# Print the locals.
alias pl p_ locals() local:
# Next and list, and step and list.
alias nl n;;l
alias sl s;;l
# Short cuts for walking up and down the stack
alias uu u;;u
alias uuu u;;u;;u
alias uuuu u;;u;;u;;u
alias uuuuu u;;u;;u;;u;;u
alias dd d;;d
alias ddd d;;d;;d
alias dddd d;;d;;d;;d
alias ddddd d;;d;;d;;d;;d
Wanted to share what caused the error in my case. Spend couple hours to figure this out, so hopefully it will help to save someone some time.
Strangely enough, the error was raised with the Enable drop directory quota
setting being enabled for the domain.
I am not the expert and don't know the technical explanation, but unticking the mentioned setting sorted the problem.
If you are in home page ("/Home/Index") and you would like to call Index action of Admin controller, following would work for you.
<li><a href="/Admin/Index">Admin</a></li>
Since the number of columns is a constant, you can just have an List
of int[]
.
import java.util.*;
//...
List<int[]> rowList = new ArrayList<int[]>();
rowList.add(new int[] { 1, 2, 3 });
rowList.add(new int[] { 4, 5, 6 });
rowList.add(new int[] { 7, 8 });
for (int[] row : rowList) {
System.out.println("Row = " + Arrays.toString(row));
} // prints:
// Row = [1, 2, 3]
// Row = [4, 5, 6]
// Row = [7, 8]
System.out.println(rowList.get(1)[1]); // prints "5"
Since it's backed by a List
, the number of rows can grow and shrink dynamically. Each row is backed by an int[]
, which is static, but you said that the number of columns is fixed, so this is not a problem.
You should use the OO interface to matplotlib, rather than the state machine interface. Almost all of the plt.*
function are thin wrappers that basically do gca().*
.
plt.subplot
returns an axes
object. Once you have a reference to the axes object you can plot directly to it, change its limits, etc.
import matplotlib.pyplot as plt
ax1 = plt.subplot(131)
ax1.scatter([1, 2], [3, 4])
ax1.set_xlim([0, 5])
ax1.set_ylim([0, 5])
ax2 = plt.subplot(132)
ax2.scatter([1, 2],[3, 4])
ax2.set_xlim([0, 5])
ax2.set_ylim([0, 5])
and so on for as many axes as you want.
or better, wrap it all up in a loop:
import matplotlib.pyplot as plt
DATA_x = ([1, 2],
[2, 3],
[3, 4])
DATA_y = DATA_x[::-1]
XLIMS = [[0, 10]] * 3
YLIMS = [[0, 10]] * 3
for j, (x, y, xlim, ylim) in enumerate(zip(DATA_x, DATA_y, XLIMS, YLIMS)):
ax = plt.subplot(1, 3, j + 1)
ax.scatter(x, y)
ax.set_xlim(xlim)
ax.set_ylim(ylim)
If you already have a struct.
import (
"bytes"
"encoding/json"
"io"
"net/http"
"os"
)
// .....
type Student struct {
Name string `json:"name"`
Address string `json:"address"`
}
// .....
body := &Student{
Name: "abc",
Address: "xyz",
}
payloadBuf := new(bytes.Buffer)
json.NewEncoder(payloadBuf).Encode(body)
req, _ := http.NewRequest("POST", url, payloadBuf)
client := &http.Client{}
res, e := client.Do(req)
if e != nil {
return e
}
defer res.Body.Close()
fmt.Println("response Status:", res.Status)
// Print the body to the stdout
io.Copy(os.Stdout, res.Body)
Full gist.
Here is an example of how you can do it in "classic" R graphics:
## generate some random data
carrotLengths <- rnorm(1000,15,5)
cucumberLengths <- rnorm(200,20,7)
## calculate the histograms - don't plot yet
histCarrot <- hist(carrotLengths,plot = FALSE)
histCucumber <- hist(cucumberLengths,plot = FALSE)
## calculate the range of the graph
xlim <- range(histCucumber$breaks,histCarrot$breaks)
ylim <- range(0,histCucumber$density,
histCarrot$density)
## plot the first graph
plot(histCarrot,xlim = xlim, ylim = ylim,
col = rgb(1,0,0,0.4),xlab = 'Lengths',
freq = FALSE, ## relative, not absolute frequency
main = 'Distribution of carrots and cucumbers')
## plot the second graph on top of this
opar <- par(new = FALSE)
plot(histCucumber,xlim = xlim, ylim = ylim,
xaxt = 'n', yaxt = 'n', ## don't add axes
col = rgb(0,0,1,0.4), add = TRUE,
freq = FALSE) ## relative, not absolute frequency
## add a legend in the corner
legend('topleft',c('Carrots','Cucumbers'),
fill = rgb(1:0,0,0:1,0.4), bty = 'n',
border = NA)
par(opar)
The only issue with this is that it looks much better if the histogram breaks are aligned, which may have to be done manually (in the arguments passed to hist
).
Use split
and map
function:
var str = "123, 124, 234,252";
var arr = str.split(",");
arr = arr.map(function (val) { return +val + 1; });
Notice +val
- string is casted to a number.
Or shorter:
var str = "123, 124, 234,252";
var arr = str.split(",").map(function (val) { return +val + 1; });
Today I'd advise against using +
operator to cast variable to a number. Instead I'd go with a more explicit but also more readable Number
call:
var str = "123, 124, 234,252";_x000D_
var arr = str.split(",").map(function (val) {_x000D_
return Number(val) + 1;_x000D_
});_x000D_
console.log(arr);
_x000D_
ECMAScript 2015 introduced arrow function so it could be used instead to make the code more concise:
var str = "123, 124, 234,252";_x000D_
var arr = str.split(",").map(val => Number(val) + 1);_x000D_
console.log(arr);
_x000D_
What is meta_key
? Strip out all of the meta_value
conditionals, reduce, and you end up with this:
SELECT
*
FROM
meta_data
WHERE
(
(meta_key = 'lat')
)
AND
(
(meta_key = 'long')
)
GROUP BY
item_id
Since meta_key
can never simultaneously equal two different values, no results will be returned.
Based on comments throughout this question and answers so far, it sounds like you're looking for something more along the lines of this:
SELECT
*
FROM
meta_data
WHERE
(
(meta_key = 'lat')
AND
(
(meta_value >= '60.23457047672217')
OR
(meta_value <= '60.23457047672217')
)
)
OR
(
(meta_key = 'long')
AND
(
(meta_value >= '24.879140853881836')
OR
(meta_value <= '24.879140853881836')
)
)
GROUP BY
item_id
Note the OR
between the top-level conditionals. This is because you want records which are lat
or long
, since no single record will ever be lat
and long
.
I'm still not sure what you're trying to accomplish by the inner conditionals. Any non-null value will match those numbers. So maybe you can elaborate on what you're trying to do there. I'm also not sure about the purpose of the GROUP BY
clause, but that might be outside the context of this question entirely.
On the recent version (from Yosemite or El Capitan I believe... at least from Sierra onward), you need to run brew postinstall python3
after brew install python3
if you use homebrew.
So,
brew install python3 # this only installs python
brew postinstall python3 # this installs pip
According to the official Homebrew page:
On 1st March 2018 the python formula will be upgraded to Python 3.x and a python@2 formula will be added for installing Python 2.7 (although this will be keg-only so neither python nor python2 will be added to the PATH by default without a manual brew link --force). We will maintain python2, python3 and python@3 aliases.
So to install Python 3, run the following command:
brew install python3
Then, the pip
is installed automatically, and you can install any package by pip install <package>
.
You can use the Tanuki wrapper to spawn a process with POSIX spawn instead of fork. http://wrapper.tanukisoftware.com/doc/english/child-exec.html
The WrapperManager.exec() function is an alternative to the Java-Runtime.exec() which has the disadvantage to use the fork() method, which can become on some platforms very memory expensive to create a new process.
You can also use fs-extra, which provide a lot frequently used file operations.
Sample Code:
var fs = require('fs-extra')
fs.mkdirs('/tmp/some/long/path/that/prob/doesnt/exist', function (err) {
if (err) return console.error(err)
console.log("success!")
})
fs.mkdirsSync('/tmp/another/path')
docs here: https://github.com/jprichardson/node-fs-extra#mkdirsdir-callback
FYI : How to download data in CSV from Kibana:
In Kibana--> 1. Go to 'Discover' in left side
Select Index Field (based on your dashboard data) (*** In case if you are not sure which index to select-->go to management tab-->Saved Objects-->Dashboard-->select dashboard name-->scroll down to JSON-->you will see the Index name )
left side you see all the variables available in the data-->click over the variable name that you want to have in csv-->click add-->this variable will be added on the right side of the columns avaliable
Top right section of the kibana-->there is the time filter-->click -->select the duration for which you want the csv
Top upper right -->Reporting-->save this time/variable selection with a new report-->click generate CSV
Go to 'Management' in left side--> 'Reporting'-->download your csv
Before creating a file, it's needed to create all the parent's directories.
Use yourFile.getParentFile().mkdirs()
I am using 11.2 and received timeouts.
I resolved by using the version of jsoup below.
<dependency>
<groupId>org.jsoup</groupId>
<artifactId>jsoup</artifactId>
<version>1.7.2</version>
<scope>compile</scope>
</dependency>
I am not 100% sure what the conditions are for this, but for me the above didn't work directly, thought it got close. I think it was because I needed "id" for my view by in the model it was called "ObjectID".
I had a model with a variety of pieces of information. I just needed the id.
Before the above I created a new System.Web.Routing.RouteValueDictionary object and added the needed id.
(System.Web.Routing.)RouteValueDictionary RouteInfo = new RouteValueDictionary();
RouteInfo.Add("id", ObjectID);
return RedirectToAction("details", RouteInfo);
(Note: the MVC project in question I didn't create, so I don't know where all the right "fiddly" bits are.)
Bootstrap has it's own centering class named text-center.
<div class="span7 text-center"></div>
Here are some examples:
> z$mean <- rowMeans(subset(z, select = c(x, y)), na.rm = TRUE)
> z
w x y mean
1 5 1 1 1
2 6 2 2 2
3 7 3 3 3
4 8 4 NA 4
weighted mean
> z$y <- rev(z$y)
> z
w x y mean
1 5 1 NA 1
2 6 2 3 2
3 7 3 2 3
4 8 4 1 4
>
> weight <- c(1, 2) # x * 1/3 + y * 2/3
> z$wmean <- apply(subset(z, select = c(x, y)), 1, function(d) weighted.mean(d, weight, na.rm = TRUE))
> z
w x y mean wmean
1 5 1 NA 1 1.000000
2 6 2 3 2 2.666667
3 7 3 2 3 2.333333
4 8 4 1 4 2.000000
Add CDATA to your string resource
Strings.xml
<string name="txtCredits"><![CDATA[<a href=\"http://www.google.com\">Google</a>]]></string>
Call this before the query:
set define off;
Alternatively, hacky:
update t set country = 'Trinidad and Tobago' where country = 'trinidad &' || ' tobago';
From Tuning SQL*Plus:
SET DEFINE OFF disables the parsing of commands to replace substitution variables with their values.
You could try Java 8 new date
, more information can be found on the Oracle documentation.
Or you can try the old one
public static Date getDateFromString(String format, String dateStr) {
DateFormat formatter = new SimpleDateFormat(format);
Date date = null;
try {
date = (Date) formatter.parse(dateStr);
} catch (ParseException e) {
e.printStackTrace();
}
return date;
}
public static String getDate(Date date, String dateFormat) {
DateFormat formatter = new SimpleDateFormat(dateFormat);
return formatter.format(date);
}
For those who have the following error:
Error Code: 1290. The MySQL server is running with the --secure-file-priv option so it cannot execute this statement
You can simply run this command to see which folder can load files from:
SHOW VARIABLES LIKE "secure_file_priv";
After that, you have to copy the files in that folder and run the query with LOAD DATA LOCAL INFILE
instead of LOAD DATA INFILE
.
neat one-liner:
while (dataReader.Read())
{
employee.FirstName = (!dataReader.IsDBNull(dataReader.GetOrdinal("FirstName"))) ? dataReader["FirstName"].ToString() : "";
}
I used Luke Stackwalker and it did the job for my Visual Studio project.
Other interesting projects are:
Just use this constructor of List<T>
. It accepts any IEnumerable<T>
as an argument.
string[] arr = ...
List<string> list = new List<string>(arr);
Overall I don't see anything that would break in your code.
Two suggestions:
The way you are combining Buffer
objects is a suboptimal because it has to copy all the pre-existing data on every 'data' event. It would be better to put the chunks in an array and concat
them all at the end.
var bufs = [];
stdout.on('data', function(d){ bufs.push(d); });
stdout.on('end', function(){
var buf = Buffer.concat(bufs);
}
For performance, I would look into if the S3 library you are using supports streams. Ideally you wouldn't need to create one large buffer at all, and instead just pass the stdout
stream directly to the S3 library.
As for the second part of your question, that isn't possible. When a function is called, it is allocated its own private context, and everything defined inside of that will only be accessible from other items defined inside that function.
Dumping the file to the filesystem would probably mean less memory usage per request, but file IO can be pretty slow so it might not be worth it. I'd say that you shouldn't optimize too much until you can profile and stress-test this function. If the garbage collector is doing its job you may be overoptimizing.
With all that said, there are better ways anyway, so don't use files. Since all you want is the length, you can calculate that without needing to append all of the buffers together, so then you don't need to allocate a new Buffer at all.
var pause_stream = require('pause-stream');
// Your other code.
var bufs = [];
stdout.on('data', function(d){ bufs.push(d); });
stdout.on('end', function(){
var contentLength = bufs.reduce(function(sum, buf){
return sum + buf.length;
}, 0);
// Create a stream that will emit your chunks when resumed.
var stream = pause_stream();
stream.pause();
while (bufs.length) stream.write(bufs.shift());
stream.end();
var headers = {
'Content-Length': contentLength,
// ...
};
s3.putStream(stream, ....);
I've also find this fix that zooms to fit all markers
LatLngList: an array of instances of latLng, for example:
// "map" is an instance of GMap3
var LatLngList = [
new google.maps.LatLng (52.537,-2.061),
new google.maps.LatLng (52.564,-2.017)
],
latlngbounds = new google.maps.LatLngBounds();
LatLngList.forEach(function(latLng){
latlngbounds.extend(latLng);
});
// or with ES6:
// for( var latLng of LatLngList)
// latlngbounds.extend(latLng);
map.setCenter(latlngbounds.getCenter());
map.fitBounds(latlngbounds);
This should solve your problem:
td {
/* <http://www.w3.org/wiki/CSS/Properties/text-align>
* left, right, center, justify, inherit
*/
text-align: center;
/* <http://www.w3.org/wiki/CSS/Properties/vertical-align>
* baseline, sub, super, top, text-top, middle,
* bottom, text-bottom, length, or a value in percentage
*/
vertical-align: top;
}
No,its check like if string is "john" OR "mary" OR "peter" OR "etc."
you should check using ||
Like.,,if(str.equals("john") || str.equals("mary") || str.equals("peter"))
Try this test:
any(substring in string for substring in substring_list)
It will return True
if any of the substrings in substring_list
is contained in string
.
Note that there is a Python analogue of Marc Gravell's answer in the linked question:
from itertools import imap
any(imap(string.__contains__, substring_list))
In Python 3, you can use map
directly instead:
any(map(string.__contains__, substring_list))
Probably the above version using a generator expression is more clear though.
I would add this to the LI's CSS
.list-item
{
float: left;
clear: left;
}
There is a problem with setting the tint color on the view after presenting; even if you do it in the completion block of presentViewController:animated:completion:, it causes a flicker effect on the color of the button titles. This is sloppy, unprofessional and completely unacceptable.
Other solutions presented depend on the view hierarchy remaining static, something that Apple is loathe to do. Expect those solutions to fail in future releases of iOS.
The one sure-fire way to solve this problem and to do it everywhere, is via adding a category to UIAlertController and swizzling the viewWillAppear.
The header:
//
// UIAlertController+iOS9TintFix.h
//
// Created by Flor, Daniel J on 11/2/15.
//
#import <UIKit/UIKit.h>
@interface UIAlertController (iOS9TintFix)
+ (void)tintFix;
- (void)swizzledViewWillAppear:(BOOL)animated;
@end
The implementation:
//
// UIAlertController+iOS9TintFix.m
//
// Created by Flor, Daniel J on 11/2/15.
//
#import "UIAlertController+iOS9TintFix.h"
#import <objc/runtime.h>
@implementation UIAlertController (iOS9TintFix)
+ (void)tintFix {
static dispatch_once_t onceToken;
dispatch_once(&onceToken, ^{
Method method = class_getInstanceMethod(self, @selector(viewWillAppear:));
Method swizzle = class_getInstanceMethod(self, @selector(swizzledViewWillAppear:));
method_exchangeImplementations(method, swizzle);});
}
- (void)swizzledViewWillAppear:(BOOL)animated {
[self swizzledViewWillAppear:animated];
for (UIView *view in self.view.subviews) {
if (view.tintColor == self.view.tintColor) {
//only do those that match the main view, so we don't strip the red-tint from destructive buttons.
self.view.tintColor = [UIColor colorWithRed:0.0 green:122.0/255.0 blue:1.0 alpha:1.0];
[view setNeedsDisplay];
}
}
}
@end
Add a .pch (precompiled header) to your project and include the category:
#import "UIAlertController+iOS9TintFix.h"
Make sure you register your pch in the project properly, and it will include the category methods in every class that uses the UIAlertController.
Then, in your app delegates didFinishLaunchingWithOptions method, import your category and call
[UIAlertController tintFix];
and it will automatically propagate to every single instance of UIAlertController within your app, whether launched by your code or anyone else's.
This solution works for both iOS 8.X and iOS 9.X and lacks the flicker of the tint change post-presentation approach. It is also completely agnostic with respect to the view hierarchy of the sub-views of the UIAlertController.
Happy hacking!
You may find that gnuplot's for loops are useful in this case, if you adjust your filenames or graph titles appropriately.
e.g.
filenames = "first second third fourth fifth"
plot for [file in filenames] file."dat" using 1:2 with lines
and
filename(n) = sprintf("file_%d", n)
plot for [i=1:10] filename(i) using 1:2 with lines
The simplest way is to use the Common Table Expression (CTE) introduced in SQL 2005
with cte as
(select u.assid col1 ,s.assid col2 from ud u inner join sale s on u.id = s.udid)
update cte set col1=col2
Use ProcessInfo.RedirectStandardOutput to redirect the output when creating your console process.
Then you can use Process.StandardOutput to read the program output.
The second link has a sample code how to do it.
It often ends up being easier to load your data into the database, even if it is only to run a quick query. Hard-coded data seems quick to enter, but it quickly becomes a pain if you start having to make changes.
However, if you want to code the names directly into your query, here is a cleaner way to do it:
with names (fname,lname) as (
values
('John','Smith'),
('Mary','Jones')
)
select city from user
inner join names on
fname=firstName and
lname=lastName;
The advantage of this is that it separates your data out of the query somewhat.
(This is DB2 syntax; it may need a bit of tweaking on your system).
What you can do to resolve your conflict is
svn resolve --accept working -R <path>
where <path>
is where you have your conflict (can be the root of your repo).
Explanations:
resolve
asks svn
to resolve the conflictaccept working
specifies to keep your working files-R
stands for recursiveHope this helps.
EDIT:
To sum up what was said in the comments below:
<path>
should be the directory in conflict (C:\DevBranch\
in the case of the OP)svn switch
commandSwitch working copy to new branch/tag
option at branch creationI would agree with Lee's advice for taking parameters, but not returning.
If you specify your methods to return an interface that means you are free to change the exact implementation later on without the consuming method ever knowing. I thought I'd never need to change from a List<T> but had to later change to use a custom list library for the extra functionality it provided. Because I'd only returned an IList<T> none of the people that used the library had to change their code.
Of course that only need apply to methods that are externally visible (i.e. public methods). I personally use interfaces even in internal code, but as you are able to change all the code yourself if you make breaking changes it's not strictly necessary.
Don't want to be repetitive, but just to summarize in other way (features added in new HttpClient):
I wrote an article, where I covered the difference between old "http" and new "HttpClient". The goal was to explain it in the easiest way possible.
You could make use of the Javascript DOM API. In particular, look at the createElement() method.
You could create a re-usable function that will create an image like so...
function show_image(src, width, height, alt) {
var img = document.createElement("img");
img.src = src;
img.width = width;
img.height = height;
img.alt = alt;
// This next line will just add it to the <body> tag
document.body.appendChild(img);
}
Then you could use it like this...
<button onclick=
"show_image('http://google.com/images/logo.gif',
276,
110,
'Google Logo');">Add Google Logo</button>
@MaxPython The answer above is missing ":"
try:
#do something
except:
# print 'error/exception'
def printError(e): print e
You need to provide the entire certificate chain to curl, since curl no longer ships with any CA certs. Since the cacert option can only use one file, you need to concat the full chain info into 1 file
Copy the certificate chain (from your browser, for example) into DER encoded binary x.509(.cer). Do this for each cert.
Convert the certs into PEM, and concat them into 1 file.
openssl x509 -inform DES -in file1.cer -out file1.pem -text
openssl x509 -inform DES -in file2.cer -out file2.pem -text
openssl x509 -inform DES -in file3.cer -out file3.pem -text
cat *.pem > certRepo
curl --cacert certRepo -u user:passwd -X GET -H 'Content-Type: application/json' "https//somesecureserver.com/rest/field"
I wrote a blog on how to do this here: http://javamemento.blogspot.no/2015/10/using-curl-with-ssl-cert-chain.html
After reading some more document, I found the solution:
https://github.com/ReactTraining/react-router/blob/master/packages/react-router/docs/api/location.md
I just need to access the injected property location
of the instance of the component like:
var currentLocation = this.props.location.pathname
Try this code:
HTML
<button type='button' id = 'rbutton_'+i onclick="disable(i)">Click me</button>
function
function disable(i){
$("#rbutton_"+i).attr("disabled","disabled");
}
Other solution with jquery
$('button').click(function(){
$(this).attr("disabled","disabled");
});
Other solution with pure javascript
<button type='button' id = 'rbutton_1' onclick="disable(1)">Click me</button>
<script>
function disable(i){
document.getElementById("rbutton_"+i).setAttribute("disabled","disabled");
}
</script>
To answer your updated question you can do
String[] lines = ("Name = Bob\n" +
"Age = 27\n" +
"Occupation = Student\n" +
"Status = Single").split("\n");
for (String line : lines) {
String[] parts = line.split(" = +");
System.out.printf("%-19s %s%n", parts[0] + " =", parts[1]);
}
prints
Name = Bob
Age = 27
Occupation = Student
Status = Single
The pythonic way is to use enumerate
:
for idx,item in enumerate(list):
I think you want like this, DEMO
var xmlDoc = $.parseXML( xml );
var $xml = $(xmlDoc);
var $person = $xml.find("person");
$person.each(function(){
var name = $(this).find('name').text(),
age = $(this).find('age').text();
$("#ProfileList" ).append('<li>' +name+ ' - ' +age+ '</li>');
});
Long.MAX_VALUE
is 9,223,372,036,854,775,807
.
If you were executing your function once per nanosecond, it would still take over 292 years to encounter this situation according to this source.
When that happens, it'll just wrap around to Long.MIN_VALUE
, or -9,223,372,036,854,775,808
as others have said.
For the record, I think this is more of what he was looking for…
UIBarButtonItem *l_backButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemRewind target:self action:@selector(backToRootView:)];
self.navigationItem.leftBarButtonItem = l_backButton;
- (void) backToRootView:(id)sender {
// Perform some custom code
[self.navigationController popToRootViewControllerAnimated:YES];
}
If you want to open Google Play store from your app then use this command directy: market://details?gotohome=com.yourAppName
, it will open your app's Google Play store pages.
Show all apps by a specific publisher
Search for apps that using the Query on its title or description
AtomicInteger
Maybe this is of some worth also: there is a Java class called AtomicInteger
.
This class has some useful methods like addAndGet(int delta)
or incrementAndGet()
(and their counterparts) which allow you to increment/decrement the value of the same instance. Though the class is designed to be used in the context of concurrency, it's also quite useful in other scenarios and probably fits your need.
final AtomicInteger count = new AtomicInteger( 0 ) ;
…
count.incrementAndGet(); // Ignoring the return value.
For me, it's working with this:
BigDecimal a = new BigDecimal("9999999999.6666",precision);
BigDecimal b = new BigDecimal("21",precision);
a.divideToIntegralValue(b).setScale(2)
a quick way to see your errors whilst testing:
$error= $st->errorInfo();
echo $error[2];
It is easy to check for removable devices. However, there's no guarantee that it is a USB device:
var drives = DriveInfo.GetDrives()
.Where(drive => drive.IsReady && drive.DriveType == DriveType.Removable);
This will return a list of all removable devices that are currently accessible. More information:
DriveInfo
class (msdn documentation)DriveType
enumeration (msdn documentation)In cs file
DataTable employeeData = CreateDataTable();
gridEmployees.DataContext = employeeData.DefaultView;
In xaml file
<DataGrid Name="gridEmployees" ItemsSource="{Binding}">
Update: AdoptOpenJDK has changed its name to Adoptium, as part of its move to the Eclipse Foundation.
Difference between OpenJDK and AdoptOpenJDK
The first provides source-code, the other provides builds of that source-code.
Adoptium of the Eclipse Foundation, formerly known as AdoptOpenJDK, is only one of several vendors distributing implementations of the Java platform. These include:
See this flowchart of mine to help guide you in picking a vendor for an implementation of the Java platform. Click/tap to zoom.
Another resource: This comparison matrix by Azul Systems is useful, and seems true and fair to my mind.
Here is a list of considerations and motivations to consider in choosing a vendor and implementation.
Some vendors offer you a choice of JIT technologies.
To understand more about this Java ecosystem, read Java Is Still Free
That is because you are only checking the current checkbox.
Change it to
function checkUncheck() {
$('.pChk').click(function() {
if ( $('.pChk:checked').length > 0) {
$("#ProjectListButton").show();
} else {
$("#ProjectListButton").hide();
}
});
}
to check if any of the checkboxes is checked (lots of checks in this line..).
reference: http://api.jquery.com/checked-selector/
To redirect output for all prints, you can do this:
import sys
with open('c:\\goat.txt', 'w') as f:
sys.stdout = f
print "test"
Problem in your SQL :
You can construct your sql like this :
$wpdb->prepare(
"INSERT INTO `wp_submitted_form`
(`name`,`email`,`phone`,`country`,`course`,`message`,`datesent`)
values ('$name', '$email', '$phone', '$country',
'$course', '$message', '$datesent')"
);
You can also use $wpdb->insert()
$wpdb->insert('table_name', input_array())
By declaring it global
inside the function that accesses it:
g_c = 0
class TestClass():
def run(self):
global g_c
for i in range(10):
g_c = 1
print(g_c)
The Python documentation says this, about the global
statement:
The global statement is a declaration which holds for the entire current code block.
Haven't tested it, but that should alert the blobs data url:
var blob = event.clipboardData.items[0].getAsFile(),
form = new FormData(),
request = new XMLHttpRequest();
var reader = new FileReader();
reader.onload = function(event) {
alert(event.target.result); // <-- data url
};
reader.readAsDataURL(blob);
The query to use with Oracle is:
String sqlStr="select COLUMN_NAME from ALL_TAB_COLUMNS where TABLE_NAME='"+_db+".users' and COLUMN_NAME not in ('password','version','id')"
Never heard of HQL for such queries. I assume it doesn't make sense for ORM implementations to deal with it. ORM is an Object Relational Mapping, and what you're looking for is metadata mapping... You wouldn't use HQL, rather use API methods for this purpose, or direct SQL. For instance, you can use JDBC DatabaseMetaData.
I think tablespace has nothing to do with schema. AFAIK tablespaces are mainly used for logical internal technical purposes which should bother DBAs. For more information regarding tablespaces, see Oracle doc.
The easiest way I have tested just add a <br>
as in the following:
<div class="col-sm-6">
<br><h3><p class="text-center">Some Text</p></h3>
</div>
The only problem is that a extra line break (generated by that <br>
) is generated when the screen gets smaller and it stacks. But it is quick and simple.
Beware of the use of push method, if you don't use indexes, it won't work!
var main2dArray: Things[][] = []
main2dArray.push(someTmp1dArray)
main2dArray.push(someOtherTmp1dArray)
gives only a 1 line array!
use
main2dArray[0] = someTmp1dArray
main2dArray[1] = someOtherTmp1dArray
to get your 2d array working!!!
Other beware! foreach doesn't seem to work with 2d arrays!
Probably not the best solution, but before I came here I just made this on the fly to keep working without having a quick break from study.
def raw_input(x):
input(x)
Then when I run raw_input('Enter your first name: ')
on the script I was working on, it captures it as does input()
would.
There may be a reason not to do this, that I haven't come across yet!
Build a list from the columns and remove the column you don't want to calculate the Z score for:
In [66]:
cols = list(df.columns)
cols.remove('ID')
df[cols]
Out[66]:
Age BMI Risk Factor
0 6 48 19.3 4
1 8 43 20.9 NaN
2 2 39 18.1 3
3 9 41 19.5 NaN
In [68]:
# now iterate over the remaining columns and create a new zscore column
for col in cols:
col_zscore = col + '_zscore'
df[col_zscore] = (df[col] - df[col].mean())/df[col].std(ddof=0)
df
Out[68]:
ID Age BMI Risk Factor Age_zscore BMI_zscore Risk_zscore \
0 PT 6 48 19.3 4 -0.093250 1.569614 -0.150946
1 PT 8 43 20.9 NaN 0.652753 0.074744 1.459148
2 PT 2 39 18.1 3 -1.585258 -1.121153 -1.358517
3 PT 9 41 19.5 NaN 1.025755 -0.523205 0.050315
Factor_zscore
0 1
1 NaN
2 -1
3 NaN
You can give to_s
a base other than 10:
10.to_s(16) #=> "a"
Note that in ruby 2.4 FixNum
and BigNum
were unified in the Integer
class.
If you are using an older ruby check the documentation of FixNum#to_s
and BigNum#to_s
You can connect to the Emulator via Telnet. You then have a Emulator console that lets you enter certain data like geo fixes, network etc.
How to use the console is extensively explained here. To connect to the console open a command line and type
telnet localhost 5554
You then can use the geo command to set a latitude, longitude and if needed altitude on the device that is passed to all programs using the gps location provider. See the link above for further instructions.
The specific command to run in the console is
geo fix <longitude value> <latitude value>
I found this site useful for finding a realistic lat/lng: http://itouchmap.com/latlong.html
If you need more then one coordinate you can use a kml file with a route as well it is a little bit described in this article. I can't find a better source at the moment.
Just to update this answer unless anyone comes across this later, since JDK 6 you can use
File file = new File('/directory/to/file');
file.setWritable(boolean);
file.setReadable(boolean);
file.setExecutable(boolean);
you can find the documentation on Oracle File(Java Platform SE 7). Bear in mind that these commands only work if the current working user has ownership or write access to that file. I am aware that OP wanted chmod type access for more intricate user configuration. these will set the option across the board for all users.
I use the counter variable like Fink suggests. If you want For Each and to pass ByRef (which can be more efficient for long strings) you have to cast your element as a string using CStr
Sub Example()
Dim vItm As Variant
Dim aStrings(1 To 4) As String
aStrings(1) = "one": aStrings(2) = "two": aStrings(3) = "three": aStrings(4) = "four"
For Each vItm In aStrings
do_something CStr(vItm)
Next vItm
End Sub
Function do_something(ByRef sInput As String)
Debug.Print sInput
End Function
As mentioned by others here, that you could have two adb's running ... And to add to these answers from a Linux box perspective ( for the next newbie who is working from Linux );
Uninstall your distro's android-tools ( use zypper or yum etc )
# zypper -v rm android-tools
Find where your other adb is
# find /home -iname "*adb"|grep -i android
Say it was at ;
/home/developer/Android/Sdk/platform-tools/adb
Then Make a softlink to it in the /usr/bin folder
ln -s /home/developer/Android/Sdk/platform-tools/adb /usr/bin/adb
Then;
# adb start-server
Open up your DevTools and press F1 to access the settings. Look for the console section and check the checkbox for "Log XMLHttpRequests".
Now all of your ajax and other similar requests will be logged in the console.
I prefer this method because it usually allows me to see everything that I'm looking for in the console without having to go to the network tab.
I the following code I had to replace add a GET-parameter to all references to JS-files EXCEPT one.
<link rel="stylesheet" type="text/css" href="/login/css/ABC.css" />
<script type="text/javascript" language="javascript" src="/localization/DEF.js"></script>
<script type="text/javascript" language="javascript" src="/login/jslib/GHI.js"></script>
<script type="text/javascript" language="javascript" src="/login/jslib/md5.js"></script>
sendRequest('/application/srvc/EXCEPTION.js', handleChallengeResponse, null);
sendRequest('/application/srvc/EXCEPTION.js",handleChallengeResponse, null);
This is the Matcher used:
(?<!EXCEPTION)(\.js)
What that does is look for all occurences of ".js" and if they are preceeded by the "EXCEPTION" string, discard that result from the result array. That's called negative lookbehind. Since I spent a day on finding out how to do this I thought I should share.
Try the snipped which is mentioned below, it works for me also.
In my layout xml
where I have my TabLayout
, have added style to the TabLayout
like below :
<android.support.design.widget.TabLayout
android:id="@+id/tab_layout"
style="@style/MyCustomTabLayout"
android:layout_width="match_parent"
android:layout_height="wrap_content"
app:tabGravity="fill"
app:tabMode="fixed" />
and in my style.xml
I have defined the style that is used in my layout xml, check code for styles added below :
<style name="MyCustomTabLayout" parent="Widget.Design.TabLayout">
<item name="android:background">YOUR BACKGROUND COLOR</item>
<item name="tabTextAppearance">@style/MyCustomTabText</item>
<item name="tabSelectedTextColor">SELECTED TAB TEXT COLOR</item>
<item name="tabIndicatorColor">SELECTED TAB INDICATOR COLOR</item>
</style>
<style name="MyCustomTabText" parent="TextAppearance.AppCompat.Button">
<item name="android:textSize">YOUR TEXT SIZE</item>
<item name="android:textStyle">bold</item>
<item name="android:textColor">@android:color/white</item>
</style>
I hope it will work for you.....
If someone still comes here, this is my take:
$('.selector').click(myCallbackFunction.bind({var1: 'hello', var2: 'world'}));
function myCallbackFunction(event) {
var passedArg1 = this.var1,
passedArg2 = this.var2
}
What happens here, after binding to the callback function, it will be available within the function as this
.
This idea comes from how React uses the bind
functionality.
As documented in Working with text data:
df.columns = df.columns.str.replace('$', '')
The bottom statement is equivalent to:
.half {
flex-grow: 0;
flex-shrink: 0;
flex-basis: 50%;
}
Which, in this case, would be equivalent as the box is not allowed to flex and therefore retains the initial width set by flex-basis.
Flex-basis defines the default size of an element before the remaining space is distributed so if the element were allowed to flex (grow/shrink) it may not be 50% of the width of the page.
I've found that I regularly return to https://css-tricks.com/snippets/css/a-guide-to-flexbox/ for help regarding flexbox :)
I ran into the same issue, here's my post:
Android Studio - Gradle build failing - Java Heap Space
exec summary: Windows looks for the gradle.properties file here:
C:\Users\.gradle\gradle.properties
So create that file, and add a line like this:
org.gradle.jvmargs=-XX\:MaxHeapSize\=256m -Xmx256m
as per @Faiz Siddiqui post
As you're generating the image dynamically, set the onload
property before the src
.
var img = new Image();
img.onload = function () {
alert("image is loaded");
}
img.src = "img.jpg";
Fiddle - tested on latest Firefox and Chrome releases.
You can also use the answer in this post, which I adapted for a single dynamically generated image:
var img = new Image();
// 'load' event
$(img).on('load', function() {
alert("image is loaded");
});
img.src = "img.jpg";
My solution was https://yoksel.github.io/url-encoder/ You just simply insert your svg and getting back background-image code
If you have a jenkinsfile for your pipeline, check if you see at execution time your branch name in your environment variables.
You can print them with:
pipeline {
agent any
environment {
DISABLE_AUTH = 'true'
DB_ENGINE = 'sqlite'
}
stages {
stage('Build') {
steps {
sh 'printenv'
}
}
}
}
However, PR 91 shows that the branch name is only set in certain pipeline configurations:
I tried everything mentioned, but with no success. The method which I used for Swift 3.0 :
extension UIAlertController {
func show() {
present(animated: true, completion: nil)
}
func present(animated: Bool, completion: (() -> Void)?) {
if var topController = UIApplication.shared.keyWindow?.rootViewController {
while let presentedViewController = topController.presentedViewController {
topController = presentedViewController
}
topController.present(self, animated: animated, completion: completion)
}
}
}
Maven also houses a large repository of commonly used open source projects. During the build Maven can download these dependencies for you (as well as your dependencies dependencies :)) to make this part of building a project a little more manageable.
r+
is the canonical mode for reading and writing at the same time. This is not different from using the fopen()
system call since file()
/ open()
is just a tiny wrapper around this operating system call.
IE11 do accept Java according to the link below : http://windows.microsoft.com/en-us/internet-explorer/install-java#ie=ie-11
And firefox also intended to remove NPAPI by the end of 2016 according to : https://blog.mozilla.org/futurereleases/2015/10/08/npapi-plugins-in-firefox/
if you add your remote repository by using git clone then follow the steps:-
git clone <repo_url>
then
git init
git add *
*means add all files
git commit -m 'your commit'
git remote -v
for check any branch run or not if not then nothing show then we add or fetch the repository.
"fetch first". You need to run git pull origin <branch>
or git pull -r origin <branch>
before a next push.
then
git remote add origin <git url>
git pull -r origin master
git push -u origin master```
The .navbar-static-top
you are using forces your navbar
to become full-width. Remove that class and you will get a resizable navbar
. Then, you can wrap it in a span#
of the size you want.
<div class="container">
<div class="row">
<div class="span6 offset3">
<div class="navbar">
...
</div>
</div>
</div>
you've had your sed explanation, now you can use just the shell, no need external commands
for file in F0000*
do
echo mv "$file" "${file/#F0000/F000}"
# ${file/#F0000/F000} means replace the pattern that starts at beginning of string
done
This is certainly a change from Beta to RC. In the example provided in the question, you now need to decorate your action with [HttpGet] or [AcceptVerbs("GET")].
This causes a problem if you want to mix verb based actions (i.e. "GetSomething", "PostSomething") with non verb based actions. If you try to use the attributes above, it will cause a conflict with any verb based action in your controller. One way to get arount that would be to define separate routes for each verb, and set the default action to the name of the verb. This approach can be used for defining child resources in your API. For example, the following code supports: "/resource/id/children" where id and children are optional.
context.Routes.MapHttpRoute(
name: "Api_Get",
routeTemplate: "{controller}/{id}/{action}",
defaults: new { id = RouteParameter.Optional, action = "Get" },
constraints: new { httpMethod = new HttpMethodConstraint("GET") }
);
context.Routes.MapHttpRoute(
name: "Api_Post",
routeTemplate: "{controller}/{id}/{action}",
defaults: new { id = RouteParameter.Optional, action = "Post" },
constraints: new { httpMethod = new HttpMethodConstraint("POST") }
);
Hopefully future versions of Web API will have better support for this scenario. There is currently an issue logged on the aspnetwebstack codeplex project, http://aspnetwebstack.codeplex.com/workitem/184. If this is something you would like to see, please vote on the issue.
Unfortunately, the file must be locked for updates unless you're using Office 2010 and SharePoint 2010 together. This means that only one user per time can edit a file. The locking and version tracking capabilities of SharePoint are excellent, and this makes it a great tool for the type of collaboration you're talking about, but you would have to split documents into multiple files in order to extend the amount that could be edited at a time. For instance, we sometimes unmerge documents into technical, requirements, and financials sections so that the 3 experts required for the review can work concurrently. We then merge when everyone is finished.
You can use "Date.parse()" to properly compare the dates, but since in most of the comments people are trying to split the string and then trying to add up the digits and compare with obviously wrong logic -not completely.
Here's the trick. If you are breaking the string then compare the parts in nested format.
Compare year with year, month with month and day with day.
<pre><code>
var parts1 = "26/07/2020".split('/');
var parts2 = "26/07/2020".split('/');
var latest = false;
if (parseInt(parts1[2]) > parseInt(parts2[2])) {
latest = true;
} else if (parseInt(parts1[2]) == parseInt(parts2[2])) {
if (parseInt(parts1[1]) > parseInt(parts2[1])) {
latest = true;
} else if (parseInt(parts1[1]) == parseInt(parts2[1])) {
if (parseInt(parts1[0]) >= parseInt(parts2[0])) {
latest = true;
}
}
}
return latest;
</code></pre>
Definitely the second method is preferred because you don't have the overhead of another function invocation:
window.location.href = "webpage.htm";
Docker Compose has been updated. They now have a version 2 file format.
Version 2 files are supported by Compose 1.6.0+ and require a Docker Engine of version 1.10.0+.
They now support the networking feature of Docker which when run sets up a default network called myapp_default
From their documentation your file would look something like the below:
version: '2'
services:
web:
build: .
ports:
- "8000:8000"
fpm:
image: phpfpm
nginx
image: nginx
As these containers are automatically added to the default myapp_default network they would be able to talk to each other. You would then have in the Nginx config:
fastcgi_pass fpm:9000;
Also as mentioned by @treeface in the comments remember to ensure PHP-FPM is listening on port 9000, this can be done by editing /etc/php5/fpm/pool.d/www.conf
where you will need listen = 9000
.
I have kept the below here for those using older version of Docker/Docker compose and would like the information.
I kept stumbling upon this question on google when trying to find an answer to this question but it was not quite what I was looking for due to the Q/A emphasis on docker-compose (which at the time of writing only has experimental support for docker networking features). So here is my take on what I have learnt.
Docker has recently deprecated its link feature in favour of its networks feature
Therefore using the Docker Networks feature you can link containers by following these steps. For full explanations on options read up on the docs linked previously.
First create your network
docker network create --driver bridge mynetwork
Next run your PHP-FPM container ensuring you open up port 9000 and assign to your new network (mynetwork
).
docker run -d -p 9000 --net mynetwork --name php-fpm php:fpm
The important bit here is the --name php-fpm
at the end of the command which is the name, we will need this later.
Next run your Nginx container again assign to the network you created.
docker run --net mynetwork --name nginx -d -p 80:80 nginx:latest
For the PHP and Nginx containers you can also add in --volumes-from
commands etc as required.
Now comes the Nginx configuration. Which should look something similar to this:
server {
listen 80;
server_name localhost;
root /path/to/my/webroot;
index index.html index.htm index.php;
location / {
try_files $uri $uri/ /index.php?$query_string;
}
location ~ \.php$ {
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass php-fpm:9000;
fastcgi_index index.php;
include fastcgi_params;
}
}
Notice the fastcgi_pass php-fpm:9000;
in the location block. Thats saying contact container php-fpm
on port 9000
. When you add containers to a Docker bridge network they all automatically get a hosts file update which puts in their container name against their IP address. So when Nginx sees that it will know to contact the PHP-FPM container you named php-fpm
earlier and assigned to your mynetwork
Docker network.
You can add that Nginx config either during the build process of your Docker container or afterwards its up to you.
There's something I bet you already heard about this! It's called jQuery.
$("#button1").click(function() {
$("#form1").show();
};
It's really easy and you can use CSS-like selectors and you can add animations. It's really easy to learn.
I hope this helps someone here: I encountered an issue where I needed to use JavaScript to manipulate some dynamically generated elements. After including the code to my external .js file which I had referenced to between the <script>
</script>
tags at the head section and it was working perfectly, nothing worked again from the script.Tried using developer tool on FF and it returned null value for the variable holding the new element. I decided to move my script tag to the bottom of the html file just before the </body>
tag and bingo every part of the script started to respond fine again.
you can join both tables even on UPDATE
statements,
UPDATE a
SET a.marks = b.marks
FROM tempDataView a
INNER JOIN tempData b
ON a.Name = b.Name
for faster performance, define an INDEX
on column marks
on both tables.
using SUBQUERY
UPDATE tempDataView
SET marks =
(
SELECT marks
FROM tempData b
WHERE tempDataView.Name = b.Name
)
Working In MarshMallow Operating System
btn_click=(Button) findViewById(R.id.btn_click);
btn_click.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View arg0)
{
if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M)
{
int permissionCheck = ContextCompat.checkSelfPermission(PermissionActivity.this,
android.Manifest.permission.CAMERA);
if (permissionCheck == PackageManager.PERMISSION_GRANTED)
{
//showing dialog to select image
String possibleEmail=null;
Pattern emailPattern = Patterns.EMAIL_ADDRESS; // API level 8+
Account[] accounts = AccountManager.get(PermissionActivity.this).getAccounts();
for (Account account : accounts) {
if (emailPattern.matcher(account.name).matches()) {
possibleEmail = account.name;
Log.e("keshav","possibleEmail"+possibleEmail);
}
}
Log.e("keshav","possibleEmail gjhh->"+possibleEmail);
Log.e("permission", "granted Marshmallow O/S");
} else { ActivityCompat.requestPermissions(PermissionActivity.this,
new String[]{android.Manifest.permission.READ_EXTERNAL_STORAGE,
android.Manifest.permission.READ_PHONE_STATE,
Manifest.permission.GET_ACCOUNTS,
android.Manifest.permission.CAMERA}, 1);
}
} else {
// Lower then Marshmallow
String possibleEmail=null;
Pattern emailPattern = Patterns.EMAIL_ADDRESS; // API level 8+
Account[] accounts = AccountManager.get(PermissionActivity.this).getAccounts();
for (Account account : accounts) {
if (emailPattern.matcher(account.name).matches()) {
possibleEmail = account.name;
Log.e("keshav","possibleEmail"+possibleEmail);
}
Log.e("keshav","possibleEmail gjhh->"+possibleEmail);
}
}
});
Below is the php PDF merge command.
$fileArray= array("name1.pdf","name2.pdf","name3.pdf","name4.pdf");
$datadir = "save_path/";
$outputName = $datadir."merged.pdf";
$cmd = "gs -q -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -sOutputFile=$outputName ";
//Add each pdf file to the end of the command
foreach($fileArray as $file) {
$cmd .= $file." ";
}
$result = shell_exec($cmd);
I forgot the link from where I found it, but it works fine.
Note: You should have gs (on linux and probably Mac), or Ghostscript (on windows) installed for this to work.
The case
values are just codeless "goto" points that can share the same entry point:
case text1:
case text4:
//blah
break;
Note that the braces are redundant.
To revert the revert without screwing up your workflow too much:
Your feature branch should now be able to be merged as normal when you're ready for it. The only downside here is that you'll a have a few extra merge/revert commits in your history.
The command is date
To customise the output there are a myriad of options available, see date --help
for a list.
For example, date '+%A %W %Y %X'
gives Tuesday 34 2013 08:04:22
which is the name of the day of the week, the week number, the year and the time.
When reading input from any file (stdin included) where you do not know the length, it is often better to use getline
rather than scanf
or fgets
because getline
will handle memory allocation for your string automatically so long as you provide a null pointer to receive the string entered. This example will illustrate:
#include <stdio.h>
#include <stdlib.h>
int main (int argc, char *argv[]) {
char *line = NULL; /* forces getline to allocate with malloc */
size_t len = 0; /* ignored when line = NULL */
ssize_t read;
printf ("\nEnter string below [ctrl + d] to quit\n");
while ((read = getline(&line, &len, stdin)) != -1) {
if (read > 0)
printf ("\n read %zd chars from stdin, allocated %zd bytes for line : %s\n", read, len, line);
printf ("Enter string below [ctrl + d] to quit\n");
}
free (line); /* free memory allocated by getline */
return 0;
}
The relevant parts being:
char *line = NULL; /* forces getline to allocate with malloc */
size_t len = 0; /* ignored when line = NULL */
/* snip */
read = getline (&line, &len, stdin);
Setting line
to NULL
causes getline to allocate memory automatically. Example output:
$ ./getline_example
Enter string below [ctrl + d] to quit
A short string to test getline!
read 32 chars from stdin, allocated 120 bytes for line : A short string to test getline!
Enter string below [ctrl + d] to quit
A little bit longer string to show that getline will allocated again without resetting line = NULL
read 99 chars from stdin, allocated 120 bytes for line : A little bit longer string to show that getline will allocated again without resetting line = NULL
Enter string below [ctrl + d] to quit
So with getline
you do not need to guess how long your user's string will be.
Note: This was for Bootstrap 2 (relevant when the question was asked).
You can accomplish this by using row-fluid
to make a fluid (percentage) based row inside an existing block
.
<div class="row">
<div class="span5">span5</div>
<div class="span3">span3</div>
<div class="span2">
<div class="row-fluid">
<div class="span12">span2</div>
<div class="span12">span2</div>
</div>
</div>
<div class="span2">span2</div>
</div>
<div class="row">
<div class="span6">
<div class="row-fluid">
<div class="span12">span6</div>
<div class="span12">span6</div>
</div>
</div>
<div class="span6">span6</div>
</div>
Here's a JSFiddle example.
I did notice that there was an odd left margin that appears (or does not appear) for the spans inside of the row-fluid
after the first one. This can be fixed with a small CSS tweak (it's the same CSS that is applied to the first child, expanded to those past the first child):
.row-fluid [class*="span"] {
margin-left: 0;
}
SELECT id, 1 AS sort_order
FROM b
UNION
SELECT id, 2 AS sort_order
FROM a
MINUS
SELECT id, 2 AS sort_order
FROM b
ORDER BY 2;
First must be Alphabet and then dot not allowed in target string. below is code.
string input = "A_aaA";
// B
// The regular expression we use to match
Regex r1 = new Regex("^[A-Za-z][^.]*$"); //[\t\0x0020] tab and spaces.
// C
// Match the input and write results
Match match = r1.Match(input);
if (match.Success)
{
Console.WriteLine("Valid: {0}", match.Value);
}
else
{
Console.WriteLine("Not Match");
}
Console.ReadLine();
The best way for spell checking in python is by: SymSpell, Bk-Tree or Peter Novig's method.
The fastest one is SymSpell.
This is Method1: Reference link pyspellchecker
This library is based on Peter Norvig's implementation.
pip install pyspellchecker
from spellchecker import SpellChecker
spell = SpellChecker()
# find those words that may be misspelled
misspelled = spell.unknown(['something', 'is', 'hapenning', 'here'])
for word in misspelled:
# Get the one `most likely` answer
print(spell.correction(word))
# Get a list of `likely` options
print(spell.candidates(word))
Method2: SymSpell Python
pip install -U symspellpy
All of the current answers use a literal string, which I prefer to not have in my code if possible - this does not (and provides valuable semantic meaning, to boot):
function isFunction(possibleFunction) {
return typeof(possibleFunction) === typeof(Function);
}
Personally, I try to reduce the number of strings hanging around in my code...
Also, while I am aware that typeof
is an operator and not a function, there is little harm in using syntax that makes it appear as the latter.
Best Firefox Addon to disable CORS as of September 2016: https://github.com/fredericlb/Force-CORS/releases
You can even configure it by Referrers (Website).
I put together start to finish code of a hypothetical experiment with ten measurement replicated three times. Just for fun with the help of other stackoverflowers. Thank you... Obviously loops are an option as apply
can be used but I like to see what happens.
#Create fake data
x <-rep(1:10, each =3)
y <- rnorm(30, mean=4,sd=1)
#Loop to get standard deviation from data
sd.y = NULL
for(i in 1:10){
sd.y[i] <- sd(y[(1+(i-1)*3):(3+(i-1)*3)])
}
sd.y<-rep(sd.y,each = 3)
#Loop to get mean from data
mean.y = NULL
for(i in 1:10){
mean.y[i] <- mean(y[(1+(i-1)*3):(3+(i-1)*3)])
}
mean.y<-rep(mean.y,each = 3)
#Put together the data to view it so far
data <- cbind(x, y, mean.y, sd.y)
#Make an empty matrix to fill with shrunk data
data.1 = matrix(data = NA, nrow=10, ncol = 4)
colnames(data.1) <- c("X","Y","MEAN","SD")
#Loop to put data into shrunk format
for(i in 1:10){
data.1[i,] <- data[(1+(i-1)*3),]
}
#Create atomic vectors for arrows
x <- data.1[,1]
mean.exp <- data.1[,3]
sd.exp <- data.1[,4]
#Plot the data
plot(x, mean.exp, ylim = range(c(mean.exp-sd.exp,mean.exp+sd.exp)))
abline(h = 4)
arrows(x, mean.exp-sd.exp, x, mean.exp+sd.exp, length=0.05, angle=90, code=3)
Xcode 8.3 • Swift 3.1 or later
You can use Calendar to help you create an extension to do your date calculations as follow:
extension Date {
/// Returns the amount of years from another date
func years(from date: Date) -> Int {
return Calendar.current.dateComponents([.year], from: date, to: self).year ?? 0
}
/// Returns the amount of months from another date
func months(from date: Date) -> Int {
return Calendar.current.dateComponents([.month], from: date, to: self).month ?? 0
}
/// Returns the amount of weeks from another date
func weeks(from date: Date) -> Int {
return Calendar.current.dateComponents([.weekOfMonth], from: date, to: self).weekOfMonth ?? 0
}
/// Returns the amount of days from another date
func days(from date: Date) -> Int {
return Calendar.current.dateComponents([.day], from: date, to: self).day ?? 0
}
/// Returns the amount of hours from another date
func hours(from date: Date) -> Int {
return Calendar.current.dateComponents([.hour], from: date, to: self).hour ?? 0
}
/// Returns the amount of minutes from another date
func minutes(from date: Date) -> Int {
return Calendar.current.dateComponents([.minute], from: date, to: self).minute ?? 0
}
/// Returns the amount of seconds from another date
func seconds(from date: Date) -> Int {
return Calendar.current.dateComponents([.second], from: date, to: self).second ?? 0
}
/// Returns the a custom time interval description from another date
func offset(from date: Date) -> String {
if years(from: date) > 0 { return "\(years(from: date))y" }
if months(from: date) > 0 { return "\(months(from: date))M" }
if weeks(from: date) > 0 { return "\(weeks(from: date))w" }
if days(from: date) > 0 { return "\(days(from: date))d" }
if hours(from: date) > 0 { return "\(hours(from: date))h" }
if minutes(from: date) > 0 { return "\(minutes(from: date))m" }
if seconds(from: date) > 0 { return "\(seconds(from: date))s" }
return ""
}
}
Using Date Components Formatter
let dateComponentsFormatter = DateComponentsFormatter()
dateComponentsFormatter.allowedUnits = [.second, .minute, .hour, .day, .weekOfMonth, .month, .year]
dateComponentsFormatter.maximumUnitCount = 1
dateComponentsFormatter.unitsStyle = .full
dateComponentsFormatter.string(from: Date(), to: Date(timeIntervalSinceNow: 4000000)) // "1 month"
let date1 = DateComponents(calendar: .current, year: 2014, month: 11, day: 28, hour: 5, minute: 9).date!
let date2 = DateComponents(calendar: .current, year: 2015, month: 8, day: 28, hour: 5, minute: 9).date!
let years = date2.years(from: date1) // 0
let months = date2.months(from: date1) // 9
let weeks = date2.weeks(from: date1) // 39
let days = date2.days(from: date1) // 273
let hours = date2.hours(from: date1) // 6,553
let minutes = date2.minutes(from: date1) // 393,180
let seconds = date2.seconds(from: date1) // 23,590,800
let timeOffset = date2.offset(from: date1) // "9M"
let date3 = DateComponents(calendar: .current, year: 2014, month: 11, day: 28, hour: 5, minute: 9).date!
let date4 = DateComponents(calendar: .current, year: 2015, month: 11, day: 28, hour: 5, minute: 9).date!
let timeOffset2 = date4.offset(from: date3) // "1y"
let date5 = DateComponents(calendar: .current, year: 2017, month: 4, day: 28).date!
let now = Date()
let timeOffset3 = now.offset(from: date5) // "1w"
At the time of writing this I have discovered that chromedriver 2.46 or 2.36 works well with Chrome 75.0.3770.100
Documentation here: http://chromedriver.chromium.org/downloads states align driver and browser alike but I found I had issues even with the most up-to-date driver when using Chrome 75
I am running Selenium 2 on Windows 10 Machine.
Your question can be conveniently divided into several parts:
Does a VPN hide location? Yes, he is capable of this. This is not about GPS determining your location. If you try to change the region via VPN in an application that requires GPS access, nothing will work. However, sites define your region differently. They get an IP address and see what country or region it belongs to. If you can change your IP address, you can change your region. This is exactly what VPNs can do.
How to hide location on Android? There is nothing difficult in figuring out how to set up a VPN on Android, but a couple of nuances still need to be highlighted. Let's start with the fact that not all Android VPNs are created equal. For example, VeePN outperforms many other services in terms of efficiency in circumventing restrictions. It has 2500+ VPN servers and a powerful IP and DNS leak protection system.
You can easily change the location of your Android device by using a VPN. Follow these steps for any device model (Samsung, Sony, Huawei, etc.):
Download and install a trusted VPN.
Install the VPN on your Android device.
Open the application and connect to a server in a different country.
Your Android location will now be successfully changed!
Is it legal? Yes, changing your location on Android is legal. Likewise, you can change VPN settings in Microsoft Edge on your PC, and all this is within the law. VPN allows you to change your IP address, safeguarding your privacy and protecting your actual location from being exposed. However, VPN laws may vary from country to country. There are restrictions in some regions.
Brief summary: Yes, you can change your region on Android and a VPN is a necessary assistant for this. It's simple, safe and legal. Today, VPN is the best way to change the region and unblock sites with regional restrictions.
grep -Fv -e 'Nopaging the limit is' -e 'keyword to remove is'
-F
matches by literal strings (instead of regex)
-v
inverts the match
-e
allows for multiple search patterns (all literal and inverted)
function closeWin() // Tested Code
{
var someIframe = window.parent.document.getElementById('iframe_callback');
someIframe.parentNode.removeChild(window.parent.document.getElementById('iframe_callback'));
}
<input class="question" name="Close" type="button" value="Close" onClick="closeWin()" tabindex="10" />
Not so hard:
#include <thread>
void Test::runMultiThread()
{
std::thread t1(&Test::calculate, this, 0, 10);
std::thread t2(&Test::calculate, this, 11, 20);
t1.join();
t2.join();
}
If the result of the computation is still needed, use a future instead:
#include <future>
void Test::runMultiThread()
{
auto f1 = std::async(&Test::calculate, this, 0, 10);
auto f2 = std::async(&Test::calculate, this, 11, 20);
auto res1 = f1.get();
auto res2 = f2.get();
}
I set the column widths in the HTML markup like so:
<thead>
<tr>
<th style='width: 5%;'>ProjectId</th>
<th style='width: 15%;'>Title</th>
<th style='width: 40%;'>Abstract</th>
<th style='width: 20%;'>Keywords</th>
<th style='width: 10%;'>PaperName</th>
<th style='width: 10%;'>PaperURL</th>
</tr>
</thead>
<tbody>
@foreach (var item in Model)
{
<tr id="@item.ID">
<td>@item.ProjectId</td>
<td>@item.Title</td>
<td>@item.Abstract</td>
<td>@item.Keywords</td>
<td>@item.PaperName</td>
<td>@item.PaperURL</td>
</tr>
}
</tbody>
</table>
One of my first projects as a programmer was a gem called stagecoach that (among other things) allowed the automatic adding of a github issue number to every commit message on a branch, which is a part of the question that hasn't really been answered.
Essentially when creating a branch you'd use a custom command (something like stagecoach -b <branch_name> -g <issue_number>
), and the issue number would then be assigned to that branch in a yml file. There was then a commit hook that appended the issue number to the commit message automatically.
I wouldn't recommend it for production use as at the time I'd only been programming for a few months and I no longer maintain it, but it may be of interest to somebody.
I'll add 2 points:
So, the 2 expressions are simply not equal.
WHERE some_col in (1,2,3,4,5) AND some_other_expr
--to the optimiser is this
WHERE
(
some_col = 1 OR
some_col = 2 OR
some_col = 3 OR
some_col = 4 OR
some_col = 5
)
AND
some_other_expr
So, when you break the IN clause up, you split the serial ORs up, and changed precedence.
Here is my way to resolve:
The above are all excellent answers. I just wanted to add that when there are multiple characters to check against, an if-else might turn out better since you could instead write the following.
// switch on vowels, digits, punctuation, or consonants
char c; // assign some character to 'c'
if ("aeiouAEIOU".indexOf(c) != -1) {
// handle vowel case
} else if ("!@#$%,.".indexOf(c) != -1) {
// handle punctuation case
} else if ("0123456789".indexOf(c) != -1) {
// handle digit case
} else {
// handle consonant case, assuming other characters are not possible
}
Of course, if this gets any more complicated, I'd recommend a regex matcher.
There is Task
exists, It is unnesscery using BackgroundWorker
, Task
is more simple. for example:
ProgressDialog.cs:
public partial class ProgressDialog : Form
{
public System.Windows.Forms.ProgressBar Progressbar { get { return this.progressBar1; } }
public ProgressDialog()
{
InitializeComponent();
}
public void RunAsync(Action action)
{
Task.Run(action);
}
}
Done! Then you can reuse ProgressDialog anywhere:
var progressDialog = new ProgressDialog();
progressDialog.Progressbar.Value = 0;
progressDialog.Progressbar.Maximum = 100;
progressDialog.RunAsync(() =>
{
for (int i = 0; i < 100; i++)
{
Thread.Sleep(1000)
this.progressDialog.Progressbar.BeginInvoke((MethodInvoker)(() => {
this.progressDialog.Progressbar.Value += 1;
}));
}
});
progressDialog.ShowDialog();
The maximum result which will return by elasticSearch is 10000 by providing the size
curl -XGET 'localhost:9200/index/type/_search?scroll=1m' -d '
{
"size":10000,
"query" : {
"match_all" : {}
}
}'
After that, you have to use Scroll API for getting the result and get the _scroll_id value and put this value in scroll_id
curl -XGET 'localhost:9200/_search/scroll' -d'
{
"scroll" : "1m",
"scroll_id" : ""
}'
The following syntax fixes it for you:
curl -v -F key1=value1 -F upload=@localfilename URL
I've solved it, it can be done executing:
netsh interface portproxy add v4tov4 listenport=4422 listenaddress=192.168.1.111 connectport=80 connectaddress=192.168.0.33
To remove forwarding:
netsh interface portproxy delete v4tov4 listenport=4422 listenaddress=192.168.1.111
The only solution worked for me:
Enjoy! Hope it will be useful!
writelines
expects an iterable of stringswrite
expects a single string. line1 + "\n" + line2
merges those strings together into a single string before passing it to write
.
Note that if you have many lines, you may want to use "\n".join(list_of_lines)
.
Just a reminder:
Remove orientation
from android:configChanges
attribute for the activity in your manifest xml
file if you defined it:
android:configChanges="orientation|screenLayout|screenSize"
I wrote a simple program that solved the easy ones. It took its input from a file which was just a matrix with spaces and numbers. The datastructure to solve it was just a 9 by 9 matrix of a bit mask. The bit mask would specify which numbers were still possible on a certain position. Filling in the numbers from the file would reduce the numbers in all rows/columns next to each known location. When that is done you keep iterating over the matrix and reducing possible numbers. If each location has only one option left you're done. But there are some sudokus that need more work. For these ones you can just use brute force: try all remaining possible combinations until you find one that works.
I had same issue when first start Android Studio in Window 10, with java jdk 1.8.0_66. The solution that worked is:
Step 1: Close Android Studio
Step 2: Delete Folder C:\Users\Anna\.gradle (Anna is my username)
Step 3: Open Android Studio as Administrator
Step 4: If you are currently in an opened project, close current project by select File > Close Project.
Step 5: Now you seeing this Quick Start GUI:
Wait for gradle to build again (it would download all the dependency in your build.gradle for every module in your project)
If it has not worked till now, you could restart your computer. Do step 1 again.
This happens sometime when I changed Android Studio version or recently upgrade Window. Hope that helps !
Try:
$data = file_get_contents ("file.json");
$json = json_decode($data, true);
foreach ($json as $key => $value) {
if (!is_array($value)) {
echo $key . '=>' . $value . '<br/>';
} else {
foreach ($value as $key => $val) {
echo $key . '=>' . $val . '<br/>';
}
}
}
You have to set a default value.
ALTER TABLE mytable ADD COLUMN mycolumn character varying(50) NOT NULL DEFAULT 'foo';
... some work (set real values as you want)...
ALTER TABLE mytable ALTER COLUMN mycolumn DROP DEFAULT;
I didn't check all the code but my guess is that the error is in the malloc call. You have to replace
double *ptr = malloc(sizeof(double*) * TIME);
for
double *ptr = malloc(sizeof(double) * TIME);
since you want to allocate size for a double (not the size of a pointer to a double).
Yes, there is a way. Two in fact. In October 2013 jshint added a way to ignore blocks of code like this:
// Code here will be linted with JSHint.
/* jshint ignore:start */
// Code here will be ignored by JSHint.
/* jshint ignore:end */
// Code here will be linted with JSHint.
You can also ignore a single line with a trailing comment like this:
ignoreThis(); // jshint ignore:line
Remove the *
from your query and use individual column names, like this:
SELECT SOME_OTHER_COLUMN, CONCAT(FIRSTNAME, ',', LASTNAME) AS FIRSTNAME FROM `customer`;
Using *
means, in your results you want all the columns of the table. In your case *
will also include FIRSTNAME
. You are then concatenating some columns and using alias of FIRSTNAME
. This creates 2 columns with same name.
I found the solution here.
# yum install mysql-devel gcc make
# gem install mysql -- --with-mysql-config=/usr/bin/mysql_config
Everyone explained the topic very well. There is one more point i would like add about .load() method.
As per Load document if you add suffixed selector in data url then it will not execute scripts in loading content.
$(document).ready(function(){
$("#secondPage").load("mySecondHtmlPage.html #content");
})
On the other hand, after removing selector in url, scripts in new content will run. Try this example
after removing #content in url in index.html file
$(document).ready(function(){
$("#secondPage").load("mySecondHtmlPage.html");
})
There is no such in-built feature provided by other methods in discussion.
You need to do this via an extension as of the version 1.8.1.
Go to View ? Extensions. This will open Extensions Panel.
Type bookmark
to list all related extensions.
Install
I personally like "Numbered Bookmarks" - it is pretty simple and powerful.
Go to the line you need to create a bookmark.
Click Ctrl + Shift + [some number]
Ex: Ctrl + Shift + 2
Now you can jump to this line from anywhere by pressing Ctrl + number
Ex: Ctrl + 2
Since the original question also involves a desktop and laptop and example involving music files (hence he's probably using a GUI), I'd also mention one of the best bi-directional, multi-platform, free and open source programs to date: FreeFileSync.
It's GUI based, very fast and intuitive, comes with filtering and many other options, including the ability to remote connect, to view and interactively manage "collisions" (in example, files with similar timestamps) and to switch between bidirectional transfer, mirroring and so on.
.Net4.5 does not have a 2GB limitation for objects any more. Add this lines to App.config
<runtime>
<gcAllowVeryLargeObjects enabled="true" />
</runtime>
and it will be possible to create very large objects without getting OutOfMemoryException
Please note it will work only on x64 OS's!
For those who need to return the data thru Jsonify with Flask:
cursor = db.collection.find()
data = []
for doc in cursor:
doc['_id'] = str(doc['_id']) # This does the trick!
data.append(doc)
return jsonify(data)
Here is email code I used in one of my databases. I just made variables for the person I wanted to send it to, CC, subject, and the body. Then you just use the DoCmd.SendObject command. I also set it to "True" after the body so you can edit the message before it automatically sends.
Public Function SendEmail2()
Dim varName As Variant
Dim varCC As Variant
Dim varSubject As Variant
Dim varBody As Variant
varName = "[email protected]"
varCC = "[email protected], [email protected]"
'separate each email by a ','
varSubject = "Hello"
'Email subject
varBody = "Let's get ice cream this week"
'Body of the email
DoCmd.SendObject , , , varName, varCC, , varSubject, varBody, True, False
'Send email command. The True after "varBody" allows user to edit email before sending.
'The False at the end will not send it as a Template File
End Function
The reason why you're getting that error is because you've declared your struct
as:
struct {
char name[32];
int size;
int start;
int popularity;
} stasher_file;
This is not declaring a stasher_file
type. This is declaring an anonymous struct
type and is creating a global instance named stasher_file
.
What you intended was:
struct stasher_file {
char name[32];
int size;
int start;
int popularity;
};
But note that while Brian R. Bondy's response wasn't correct about your error message, he's right that you're trying to write into the struct
without having allocated space for it. If you want an array of pointers to struct stasher_file
structures, you'll need to call malloc
to allocate space for each one:
struct stasher_file *newFile = malloc(sizeof *newFile);
if (newFile == NULL) {
/* Failure handling goes here. */
}
strncpy(newFile->name, name, 32);
newFile->size = size;
...
(BTW, be careful when using strncpy
; it's not guaranteed to NUL-terminate.)
if you are calling from static
method, use :
TestGameTable.class.getClassLoader().getResource("dice.jpg");
also happens when you use jinja templates (which have different syntax for calling object methods) and you forget to set it in settings.py
Without favouring any particular naming choice, remember that a git repo can be cloned into any root directory of your choice:
git clone https://github.com/user/repo.git myDir
Here repo.git
would be cloned into the myDir
directory.
So even if your naming convention for a public repo ended up to be slightly incorrect, it would still be possible to fix it on the client side.
That is why, in a distributed environment where any client can do whatever he/she wants, there isn't really a naming convention for Git repo.
(except to reserve "xxx.git
" for bare form of the repo 'xxx
')
There might be naming convention for REST service (similar to "Are there any naming convention guidelines for REST APIs?"), but that is a separate issue.
SELECT x.name, x.summary, (x.summary / COUNT(*)) as percents_of_total
FROM tbl t
INNER JOIN
(SELECT name, SUM(value) as summary
FROM tbl
WHERE year BETWEEN 2000 AND 2001
GROUP BY name) x ON x.name = t.name
GROUP BY x.name, x.summary
By using "header guards":
#ifndef MYCLASS_H
#define MYCLASS_H
// This is unnecessary, see comments.
//#pragma once
// MyClass.h
#include <winsock2.h>
class MyClass
{
// methods
public:
MyClass(unsigned short port);
virtual ~MyClass(void);
};
#endif
Use a LEFT JOIN checking the right side for nulls.
SELECT a.Id
FROM TableA a
LEFT JOIN TableB on a.Id = b.Id
WHERE b.Id IS NULL
The above would match up TableA and TableB based on the Id column in each, and then give you the rows where the B side is empty.
Assuming you're referring to this plugin, your code should be:
// To Store
$(function() {
$.session.set("myVar", "value");
});
// To Read
$(function() {
alert($.session.get("myVar"));
});
Before using a plugin, remember to read its documentation in order to learn how to use it. In this case, an usage example can be found in the README.markdown
file, which is displayed on the project page.
In Spyder, go to your active shell and download nltk using below 2 commands. import nltk nltk.download() Then you should see NLTK downloader window open as below, Go to 'Models' tab in this window and click on 'punkt' and download 'punkt'
I often do this way. Try this way :
ps aux | grep script_Name
Here, script_Name could be any script/file run by nohup. This command gets you a process ID. Then use this command below to kill the script running on nohup.
kill -9 1787 787
Here, 1787 and 787 are Process ID as mentioned in the question as an example. This should do what was intended in the question.