you are running python 3.7
create environment for python 3.6
python3.6 filename.py
matplotlib
is somewhat different from when the original answer was postedmatplotlib.pyplot.text
matplotlib.axes.Axes.text
import matplotlib.pyplot as plt
plt.figure(figsize=(6, 6))
plt.text(0.1, 0.9, 'text', size=15, color='purple')
# or
fig, axe = plt.subplots(figsize=(6, 6))
axe.text(0.1, 0.9, 'text', size=15, color='purple')
import matplotlib.pyplot as plt
# Build a rectangle in axes coords
left, width = .25, .5
bottom, height = .25, .5
right = left + width
top = bottom + height
ax = plt.gca()
p = plt.Rectangle((left, bottom), width, height, fill=False)
p.set_transform(ax.transAxes)
p.set_clip_on(False)
ax.add_patch(p)
ax.text(left, bottom, 'left top',
horizontalalignment='left',
verticalalignment='top',
transform=ax.transAxes)
ax.text(left, bottom, 'left bottom',
horizontalalignment='left',
verticalalignment='bottom',
transform=ax.transAxes)
ax.text(right, top, 'right bottom',
horizontalalignment='right',
verticalalignment='bottom',
transform=ax.transAxes)
ax.text(right, top, 'right top',
horizontalalignment='right',
verticalalignment='top',
transform=ax.transAxes)
ax.text(right, bottom, 'center top',
horizontalalignment='center',
verticalalignment='top',
transform=ax.transAxes)
ax.text(left, 0.5 * (bottom + top), 'right center',
horizontalalignment='right',
verticalalignment='center',
rotation='vertical',
transform=ax.transAxes)
ax.text(left, 0.5 * (bottom + top), 'left center',
horizontalalignment='left',
verticalalignment='center',
rotation='vertical',
transform=ax.transAxes)
ax.text(0.5 * (left + right), 0.5 * (bottom + top), 'middle',
horizontalalignment='center',
verticalalignment='center',
transform=ax.transAxes)
ax.text(right, 0.5 * (bottom + top), 'centered',
horizontalalignment='center',
verticalalignment='center',
rotation='vertical',
transform=ax.transAxes)
ax.text(left, top, 'rotated\nwith newlines',
horizontalalignment='center',
verticalalignment='center',
rotation=45,
transform=ax.transAxes)
plt.axis('off')
plt.show()
__getitem__
can be used to implement "lazy" dict
subclasses. The aim is to avoid instantiating a dictionary at once that either already has an inordinately large number of key-value pairs in existing containers, or has an expensive hashing process between existing containers of key-value pairs, or if the dictionary represents a single group of resources that are distributed over the internet.
As a simple example, suppose you have two lists, keys
and values
, whereby {k:v for k,v in zip(keys, values)}
is the dictionary that you need, which must be made lazy for speed or efficiency purposes:
class LazyDict(dict):
def __init__(self, keys, values):
self.keys = keys
self.values = values
super().__init__()
def __getitem__(self, key):
if key not in self:
try:
i = self.keys.index(key)
self.__setitem__(self.keys.pop(i), self.values.pop(i))
except ValueError, IndexError:
raise KeyError("No such key-value pair!!")
return super().__getitem__(key)
Usage:
>>> a = [1,2,3,4]
>>> b = [1,2,2,3]
>>> c = LazyDict(a,b)
>>> c[1]
1
>>> c[4]
3
>>> c[2]
2
>>> c[3]
2
>>> d = LazyDict(a,b)
>>> d.items()
dict_items([])
Ignoring issues surrounding dict ordering, this might be better:
next(dict.itervalues())
This way we avoid item lookup and generating a list of keys that we don't use.
next(iter(dict.values()))
folder = "ABC"
tries to run a command named folder
with arguments =
and "ABC"
. The format of command in bash is:
command arguments separated with space
while assignment is done with:
variable=something
[ -f $newfoldername/Primetime.eyetv]
, [
is a command (test
)
and -f
and $newfoldername/Primetime.eyetv]
are two arguments. It
expects a third argument (]
) which it can't find (arguments must be
separated with space) and thus will show error.[-f $newfoldername/Primetime.eyetv]
tries to run a command [-f
with argument $newfoldername/Primetime.eyetv]
Generally for cases like this, paste your code in shellcheck and see the feedback.
Here is the code for Right click on a webelement.
Actions actions = new Actions(driver);
Action action=actions.contextClick(WebElement).build(); //pass WebElement as an argument
action.perform();
Sorry to dig up an old question but in case someone stumbles onto this thread and wants a quicker solution.
Bulk inserting a unknown width file with \n row terminators into a temp table that is created outside of the EXEC statement.
DECLARE @SQL VARCHAR(8000)
IF OBJECT_ID('TempDB..#BulkInsert') IS NOT NULL
BEGIN
DROP TABLE #BulkInsert
END
CREATE TABLE #BulkInsert
(
Line VARCHAR(MAX)
)
SET @SQL = 'BULK INSERT #BulkInser FROM ''##FILEPATH##'' WITH (ROWTERMINATOR = ''\n'')'
EXEC (@SQL)
SELECT * FROM #BulkInsert
Further support that dynamic SQL within an EXEC statement has access to temp tables outside of the EXEC statement. http://sqlfiddle.com/#!3/d41d8/19343
DECLARE @SQL VARCHAR(8000)
IF OBJECT_ID('TempDB..#BulkInsert') IS NOT NULL
BEGIN
DROP TABLE #BulkInsert
END
CREATE TABLE #BulkInsert
(
Line VARCHAR(MAX)
)
INSERT INTO #BulkInsert
(
Line
)
SELECT 1
UNION SELECT 2
UNION SELECT 3
SET @SQL = 'SELECT * FROM #BulkInsert'
EXEC (@SQL)
Further support, written for MSSQL2000 http://technet.microsoft.com/en-us/library/aa175921(v=sql.80).aspx
Example at the bottom of the link
DECLARE @cmd VARCHAR(1000), @ExecError INT
CREATE TABLE #ErrFile (ExecError INT)
SET @cmd = 'EXEC GetTableCount ' +
'''pubs.dbo.authors''' +
'INSERT #ErrFile VALUES(@@ERROR)'
EXEC(@cmd)
SET @ExecError = (SELECT * FROM #ErrFile)
SELECT @ExecError AS '@@ERROR'
Just thinking off the top of my head, you could do this:
public string[] Randomize(string[] input)
{
List<string> inputList = input.ToList();
string[] output = new string[input.Length];
Random randomizer = new Random();
int i = 0;
while (inputList.Count > 0)
{
int index = r.Next(inputList.Count);
output[i++] = inputList[index];
inputList.RemoveAt(index);
}
return (output);
}
Use npm-run
.
From the readme:
Any executable available to an npm lifecycle script is available to npm-run
.
$ npm install mocha # mocha installed in ./node_modules
$ npm-run mocha test/* # uses locally installed mocha executable
$ npm install -g npm-run
As for the other part of the question, it's common to put the underscore at the end of the variable name to not clash with anything internal.
I do this even inside classes and namespaces because I then only have to remember one rule (compared to "at the end of the name in global scope, and the beginning of the name everywhere else").
Use the FULL path to the folder in your If Not Exist code. Then you won't even have to CD anymore:
If Not Exist "C:\Documents and Settings\John\Start Menu\Programs\SoftWareFolder\"
I used @tsds way but by only using the split function.
var str = 'one:two;three';
str.split(':')[1].split(';')[0] // returns 'two'
word of caution: if therre is no ":" in the string accessing '1' index of the array will throw an error! str.split(':')[1]
therefore @tsds way is safer if there is uncertainty
str.split(':').pop().split(';')[0]
Why don't you use your values from the DB and store them on an ArrayList and then just use:
yourSpinner.setSelection(yourArrayList.indexOf("Category 1"));
In addition to all the great answers provided here, the official Java SE 7 programming guide has a pretty concise manual on using assert
; with several spot-on examples of when it's a good (and, importantly, bad) idea to use assertions, and how it's different from throwing exceptions.
My class for request runtime permissions in Activity
or Fragment
It also help you show rationale or open Setting to enable permission after user denied a permission (with/without Never ask again
) option easier
class RequestPermissionHandler(private val activity: Activity? = null,
private val fragment: Fragment? = null,
private val permissions: Set<String> = hashSetOf(),
private val listener: Listener? = null
) {
private var hadShowRationale: Boolean = false
fun requestPermission() {
hadShowRationale = showRationaleIfNeed()
if (!hadShowRationale) {
doRequestPermission(permissions)
}
}
fun retryRequestDeniedPermission() {
doRequestPermission(permissions)
}
private fun showRationaleIfNeed(): Boolean {
val unGrantedPermissions = getPermission(permissions, Status.UN_GRANTED)
val permanentDeniedPermissions = getPermission(unGrantedPermissions, Status.PERMANENT_DENIED)
if (permanentDeniedPermissions.isNotEmpty()) {
val consume = listener?.onShowSettingRationale(unGrantedPermissions)
if (consume != null && consume) {
return true
}
}
val temporaryDeniedPermissions = getPermission(unGrantedPermissions, Status.TEMPORARY_DENIED)
if (temporaryDeniedPermissions.isNotEmpty()) {
val consume = listener?.onShowPermissionRationale(temporaryDeniedPermissions)
if (consume != null && consume) {
return true
}
}
return false
}
fun requestPermissionInSetting() {
val intent = Intent(Settings.ACTION_APPLICATION_DETAILS_SETTINGS)
val packageName = activity?.packageName ?: run {
fragment?.requireActivity()?.packageName
}
val uri = Uri.fromParts("package", packageName, null)
intent.data = uri
activity?.apply {
startActivityForResult(intent, REQUEST_CODE)
} ?: run {
fragment?.startActivityForResult(intent, REQUEST_CODE)
}
}
fun onRequestPermissionsResult(requestCode: Int, permissions: Array<String>,
grantResults: IntArray) {
if (requestCode == REQUEST_CODE) {
for (i in grantResults.indices) {
if (grantResults[i] == PackageManager.PERMISSION_GRANTED) {
markNeverAskAgainPermission(permissions[i], false)
} else if (!shouldShowRequestPermissionRationale(permissions[i])) {
markNeverAskAgainPermission(permissions[i], true)
}
}
var hasShowRationale = false
if (!hadShowRationale) {
hasShowRationale = showRationaleIfNeed()
}
if (hadShowRationale || !hasShowRationale) {
notifyComplete()
}
}
}
fun onActivityResult(requestCode: Int) {
if (requestCode == REQUEST_CODE) {
getPermission(permissions, Status.GRANTED).forEach {
markNeverAskAgainPermission(it, false)
}
notifyComplete()
}
}
fun cancel() {
notifyComplete()
}
private fun doRequestPermission(permissions: Set<String>) {
activity?.let {
ActivityCompat.requestPermissions(it, permissions.toTypedArray(), REQUEST_CODE)
} ?: run {
fragment?.requestPermissions(permissions.toTypedArray(), REQUEST_CODE)
}
}
private fun getPermission(permissions: Set<String>, status: Status): Set<String> {
val targetPermissions = HashSet<String>()
for (p in permissions) {
when (status) {
Status.GRANTED -> {
if (isPermissionGranted(p)) {
targetPermissions.add(p)
}
}
Status.TEMPORARY_DENIED -> {
if (shouldShowRequestPermissionRationale(p)) {
targetPermissions.add(p)
}
}
Status.PERMANENT_DENIED -> {
if (isNeverAskAgainPermission(p)) {
targetPermissions.add(p)
}
}
Status.UN_GRANTED -> {
if (!isPermissionGranted(p)) {
targetPermissions.add(p)
}
}
}
}
return targetPermissions
}
private fun isPermissionGranted(permission: String): Boolean {
return activity?.let {
ActivityCompat.checkSelfPermission(it, permission) == PackageManager.PERMISSION_GRANTED
} ?: run {
ActivityCompat.checkSelfPermission(fragment!!.requireActivity(), permission) == PackageManager.PERMISSION_GRANTED
}
}
private fun shouldShowRequestPermissionRationale(permission: String): Boolean {
return activity?.let {
ActivityCompat.shouldShowRequestPermissionRationale(it, permission)
} ?: run {
ActivityCompat.shouldShowRequestPermissionRationale(fragment!!.requireActivity(), permission)
}
}
private fun notifyComplete() {
listener?.onComplete(getPermission(permissions, Status.GRANTED), getPermission(permissions, Status.UN_GRANTED))
}
private fun getPrefs(context: Context): SharedPreferences {
return context.getSharedPreferences("SHARED_PREFS_RUNTIME_PERMISSION", Context.MODE_PRIVATE)
}
private fun isNeverAskAgainPermission(permission: String): Boolean {
return getPrefs(requireContext()).getBoolean(permission, false)
}
private fun markNeverAskAgainPermission(permission: String, value: Boolean) {
getPrefs(requireContext()).edit().putBoolean(permission, value).apply()
}
private fun requireContext(): Context {
return fragment?.requireContext() ?: run {
activity!!
}
}
enum class Status {
GRANTED, UN_GRANTED, TEMPORARY_DENIED, PERMANENT_DENIED
}
interface Listener {
fun onComplete(grantedPermissions: Set<String>, deniedPermissions: Set<String>)
fun onShowPermissionRationale(permissions: Set<String>): Boolean
fun onShowSettingRationale(permissions: Set<String>): Boolean
}
companion object {
const val REQUEST_CODE = 200
}
}
Using in Activity
like
class MainActivity : AppCompatActivity() {
private lateinit var smsAndStoragePermissionHandler: RequestPermissionHandler
override fun onCreate(savedInstanceState: Bundle?) {
super.onCreate(savedInstanceState)
setContentView(R.layout.activity_main)
smsAndStoragePermissionHandler = RequestPermissionHandler(this@MainActivity,
permissions = setOf(Manifest.permission.RECEIVE_SMS, Manifest.permission.READ_EXTERNAL_STORAGE),
listener = object : RequestPermissionHandler.Listener {
override fun onComplete(grantedPermissions: Set<String>, deniedPermissions: Set<String>) {
Toast.makeText(this@MainActivity, "complete", Toast.LENGTH_SHORT).show()
text_granted.text = "Granted: " + grantedPermissions.toString()
text_denied.text = "Denied: " + deniedPermissions.toString()
}
override fun onShowPermissionRationale(permissions: Set<String>): Boolean {
AlertDialog.Builder(this@MainActivity).setMessage("To able to Send Photo, we need SMS and" + " Storage permission")
.setPositiveButton("OK") { _, _ ->
smsAndStoragePermissionHandler.retryRequestDeniedPermission()
}
.setNegativeButton("Cancel") { dialog, _ ->
smsAndStoragePermissionHandler.cancel()
dialog.dismiss()
}
.show()
return true // don't want to show any rationale, just return false here
}
override fun onShowSettingRationale(permissions: Set<String>): Boolean {
AlertDialog.Builder(this@MainActivity).setMessage("Go Settings -> Permission. " + "Make SMS on and Storage on")
.setPositiveButton("Settings") { _, _ ->
smsAndStoragePermissionHandler.requestPermissionInSetting()
}
.setNegativeButton("Cancel") { dialog, _ ->
smsAndStoragePermissionHandler.cancel()
dialog.cancel()
}
.show()
return true
}
})
button_request.setOnClickListener { handleRequestPermission() }
}
private fun handleRequestPermission() {
smsAndStoragePermissionHandler.requestPermission()
}
override fun onRequestPermissionsResult(requestCode: Int, permissions: Array<String>,
grantResults: IntArray) {
super.onRequestPermissionsResult(requestCode, permissions, grantResults)
smsAndStoragePermissionHandler.onRequestPermissionsResult(requestCode, permissions,
grantResults)
}
override fun onActivityResult(requestCode: Int, resultCode: Int, data: Intent?) {
super.onActivityResult(requestCode, resultCode, data)
smsAndStoragePermissionHandler.onActivityResult(requestCode)
}
}
You need to uninstall it because you are using a different signature than the original. If it is not working it might be because it is still installed for another user on the device. To completely uninstall, go to Settings -> Apps -> (specific app)-> Options (the three dots on top right) -> Uninstall for all users.
I am also got this issue that time already installed ionic app(same package name) remove from my phone after that working perfectly.
Try paint.setStyle(Paint.Style.STROKE)
?
Whilst manipulating bits of an integer is useful, often for network protocols, which may be specified down to the bit, one can require manipulation of longer byte sequences (which aren't easily converted into one integer). In this case it is useful to employ the bitstring library which allows for bitwise operations on data - e.g. one can import the string 'ABCDEFGHIJKLMNOPQ' as a string or as hex and bit shift it (or perform other bitwise operations):
>>> import bitstring
>>> bitstring.BitArray(bytes='ABCDEFGHIJKLMNOPQ') << 4
BitArray('0x142434445464748494a4b4c4d4e4f50510')
>>> bitstring.BitArray(hex='0x4142434445464748494a4b4c4d4e4f5051') << 4
BitArray('0x142434445464748494a4b4c4d4e4f50510')
The first form is called Javadoc. You use this when you're writing formal APIs for your code, which are generated by the javadoc
tool. For an example, the Java 7 API page uses Javadoc and was generated by that tool.
Some common elements you'd see in Javadoc include:
@param
: this is used to indicate what parameters are being passed to a method, and what value they're expected to have
@return
: this is used to indicate what result the method is going to give back
@throws
: this is used to indicate that a method throws an exception or error in case of certain input
@since
: this is used to indicate the earliest Java version this class or function was available in
As an example, here's Javadoc for the compare
method of Integer
:
/**
* Compares two {@code int} values numerically.
* The value returned is identical to what would be returned by:
* <pre>
* Integer.valueOf(x).compareTo(Integer.valueOf(y))
* </pre>
*
* @param x the first {@code int} to compare
* @param y the second {@code int} to compare
* @return the value {@code 0} if {@code x == y};
* a value less than {@code 0} if {@code x < y}; and
* a value greater than {@code 0} if {@code x > y}
* @since 1.7
*/
public static int compare(int x, int y) {
return (x < y) ? -1 : ((x == y) ? 0 : 1);
}
The second form is a block (multi-line) comment. You use this if you want to have multiple lines in a comment.
I will say that you'd only want to use the latter form sparingly; that is, you don't want to overburden your code with block comments that don't describe what behaviors the method/complex function is supposed to have.
Since Javadoc is the more descriptive of the two, and you can generate actual documentation as a result of using it, using Javadoc would be more preferable to simple block comments.
Say your project is structured this way:
+---MyPythonProject
| +---.gitignore
| +---run.py
| | +---subscripts
| | | +---script_one.py
| | | +---script_two.py
Inside run.py
, you can import scripts one and two by:
from subscripts import script_one as One
from subscripts import script_two as Two
Now, still inside run.py
, you'll be able to call their methods with:
One.method_from_one(param)
Two.method_from_two(other_param)
Writing record arrays as CSV files with headers requires a bit more work.
This example reads from a CSV file ('example.csv'
) and writes its contents to another CSV file (out.csv
).
import numpy as np
# Write an example CSV file with headers on first line
with open('example.csv', 'w') as fp:
fp.write('''\
col1,col2,col3
1,100.1,string1
2,222.2,second string
''')
# Read it as a Numpy record array
ar = np.recfromcsv('example.csv')
print(repr(ar))
# rec.array([(1, 100.1, 'string1'), (2, 222.2, 'second string')],
# dtype=[('col1', '<i4'), ('col2', '<f8'), ('col3', 'S13')])
# Write as a CSV file with headers on first line
with open('out.csv', 'w') as fp:
fp.write(','.join(ar.dtype.names) + '\n')
np.savetxt(fp, ar, '%s', ',')
Note that the above example cannot handle values which are strings with commas. To always enclose non-numeric values within quotes, use the csv
package:
import csv
with open('out2.csv', 'wb') as fp:
writer = csv.writer(fp, quoting=csv.QUOTE_NONNUMERIC)
writer.writerow(ar.dtype.names)
writer.writerows(ar.tolist())
This is a trick I figured out for getting a DIV to float exactly in the center of a page. It is really ugly of course, but it works in all browsers.
Dots and Dashes
<div style="border: 5 dashed red;position:fixed;top:0;bottom:0;left:0;right:0;padding:5">
<table style="position:fixed;" width="100%" height="100%">
<tr>
<td style="width:50%"></td>
<td style="text-align:center">
<div style="width:200;border: 5 dashed green;padding:10">
Perfectly Centered Content
</div>
</td>
<td style="width:50%"></td>
</tr>
</table>
</div>
Cleaner
Wow, those five years just flew by, didn't they?
<div style="position:fixed;top:0px;bottom:0px;left:0px;right:0px;padding:5px">
<table style="position:fixed" width="100%" height="100%">
<tr>
<td style="width:50%"></td>
<td style="text-align:center">
<div style="padding:10px">
<img src="Happy.PM.png">
<h2>Stays in the Middle</h2>
</div>
</td>
<td style="width:50%"></td>
</tr>
</table>
</div>
The WCF API in .NET handles missing parameters by returning an HTTP 404
"Endpoint Not Found" error, when using the webHttpBinding.
The 404 Not Found
can make sense if you consider your web service method name together with its parameter signature. That is, if you expose a web service method LoginUser(string, string)
and you request LoginUser(string)
, the latter is not found.
Basically this would mean that the web service method you are calling, together with the parameter signature you specified, cannot be found.
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
The 400 Bad Request
, as Gert suggested, remains a valid response code, but I think it is normally used to indicate lower-level problems. It could easily be interpreted as a malformed HTTP request, maybe missing or invalid HTTP headers, or similar.
10.4.1 400 Bad Request
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications.
set_include_path(get_include_path() . $_SERVER["DOCUMENT_ROOT"] . "/mysite/php/includes/");
Also this can help.See set_include_path()
As an addendum, if you want to reapply your changes on top of the remote, you can also try:
git pull --rebase origin master
If you then want to undo some of your changes (but perhaps not all of them) you can use:
git reset SHA_HASH
Then do some adjustment and recommit.
You'll need to join twice:
SELECT home.*, away.*, g.network, g.date_start
FROM game AS g
INNER JOIN team AS home
ON home.importid = g.home
INNER JOIN team AS away
ON away.importid = g.away
ORDER BY g.date_start DESC
LIMIT 7
In my case, I'm using j-hipster and I had to do ./mvnw clean
to overcome this warning.
I don't see any problem, unless you are not managing them using a connection pool.
If you use connection pool, these connections are re-used instead of initiating new connections. so basically, leaving open connections and re-use them it is less problematic than re-creating them each time.
Other answers didn't work for me, but this did (in fish
shell):
brew remove <package>
for p in (brew deps <package>)
brew remove $p
end
Because brew remove $p
fails when some other package depends on p
.
My solution is:
import threading
class TimeoutError(RuntimeError):
pass
class AsyncCall(object):
def __init__(self, fnc, callback = None):
self.Callable = fnc
self.Callback = callback
def __call__(self, *args, **kwargs):
self.Thread = threading.Thread(target = self.run, name = self.Callable.__name__, args = args, kwargs = kwargs)
self.Thread.start()
return self
def wait(self, timeout = None):
self.Thread.join(timeout)
if self.Thread.isAlive():
raise TimeoutError()
else:
return self.Result
def run(self, *args, **kwargs):
self.Result = self.Callable(*args, **kwargs)
if self.Callback:
self.Callback(self.Result)
class AsyncMethod(object):
def __init__(self, fnc, callback=None):
self.Callable = fnc
self.Callback = callback
def __call__(self, *args, **kwargs):
return AsyncCall(self.Callable, self.Callback)(*args, **kwargs)
def Async(fnc = None, callback = None):
if fnc == None:
def AddAsyncCallback(fnc):
return AsyncMethod(fnc, callback)
return AddAsyncCallback
else:
return AsyncMethod(fnc, callback)
And works exactly as requested:
@Async
def fnc():
pass
If you are using flutter go with the following steps
1.open the command prompt
Then the following command
2.C:\Users\niroshan>flutter doctor
And you will see the issues as follows
Doctor summary (to see all details, run flutter doctor -v):
[v] Flutter (Channel stable, 1.22.2, on Microsoft Windows [Version 10.0.17763.1339], locale en-US)
[!] Android toolchain - develop for Android devices (Android SDK version 30.0.2)
X Android licenses not accepted. To resolve this, run: flutter doctor --android-licenses
[!] Android Studio (version 4.1.0)
X Flutter plugin not installed; this adds Flutter specific functionality.
X Dart plugin not installed; this adds Dart specific functionality.
[v] VS Code (version 1.50.1)
[!] Connected device
! No devices available
! Doctor found issues in 3 categories.
Actually what you have to run is the below command
C:\Users\niroshan>flutter doctor --android-licenses
I found when I accessed here https://console.cloud.google.com/home/dashboard
Then I got redirected to my active project, which was something like https://console.cloud.google.com/home/dashboard?project={THE_ID_OF_YOUR_PROJECT}
Then right bellow the project info, there was this Manage Options (note: I'm using Portuguese language here "Gerenciar as configurações do projeto" means "Manage project settings")
Then, finally, the delete option ("Excluir Projeto" means Delete Project)
Yep, it was hard
Another possibility is that setting dataType: json
causes JQuery to send the Content-Type: application/json
header. This is considered a non-standard header by CORS, and requires a CORS preflight request. So a few things to try:
1) Try configuring your server to send the proper preflight responses. This will be in the form of additional headers like Access-Control-Allow-Methods
and Access-Control-Allow-Headers
.
2) Drop the dataType: json
setting. JQuery should request Content-Type: application/x-www-form-urlencoded
by default, but just to be sure, you can replace dataType: json
with contentType: 'application/x-www-form-urlencoded'
Just in case you would also like check if a string (or a set of strings) contain(s) multiple sub-strings, you can also use the '|' between two substrings.
>substring="as|at"
>string_vector=c("ass","ear","eye","heat")
>grepl(substring,string_vector)
You will get
[1] TRUE FALSE FALSE TRUE
since the 1st word has substring "as", and the last word contains substring "at"
If the URL is https, like used for Amazon S3, then use getURL
json <- fromJSON(getURL('https://s3.amazonaws.com/bucket/my.json'))
You need to declare the variables outside the function:
Public iRaw As Integer
Public iColumn As Integer
Function find_results_idle()
iRaw = 1
iColumn = 1
Vince Huston has these criteria, which seem reasonable to me:
Singleton should be considered only if all three of the following criteria are satisfied:
- Ownership of the single instance cannot be reasonably assigned
- Lazy initialization is desirable
- Global access is not otherwise provided for
If ownership of the single instance, when and how initialization occurs, and global access are not issues, Singleton is not sufficiently interesting.
Use the following in command prompt to open your current location in windows explorer:
C:\your-directory> explorer .
Simply run the command:
C:>python .\file_name.py
Assuming the file name is within same folder and Python has already been added to environment variables.
We can use contains
method to check if an item exists if we have provided the implementation of equals
and hashCode
else object reference will be used for equality comparison. Also in case of a list contains
is O(n)
operation where as it is O(1)
for HashSet
so better to use later. In Java 8 we can use streams also to check item based on its equality or based on a specific property.
CurrentAccount conta5 = new CurrentAccount("João Lopes", 3135);
boolean itemExists = lista.stream().anyMatch(c -> c.equals(conta5)); //provided equals and hashcode overridden
System.out.println(itemExists); // true
String nameToMatch = "Ricardo Vitor";
boolean itemExistsBasedOnProp = lista.stream().map(CurrentAccount::getName).anyMatch(nameToMatch::equals);
System.out.println(itemExistsBasedOnProp); //true
This is what I've done to automatically add my local project node_modules/.bin
path to PATH
. In ~/.profile
I added:
if [ -d "$PWD/node_modules/.bin" ]; then
PATH="$PWD/node_modules/.bin"
fi
Then reload your bash profile: source ~/.profile
Best way to do this is by adding an additional observable to your Datasource implementation.
In the connect method you should already be using Observable.merge
to subscribe to an array of observables that include the paginator.page, sort.sortChange, etc. You can add a new subject to this and call next on it when you need to cause a refresh.
something like this:
export class LanguageDataSource extends DataSource<any> {
recordChange$ = new Subject();
constructor(private languages) {
super();
}
connect(): Observable<any> {
const changes = [
this.recordChange$
];
return Observable.merge(...changes)
.switchMap(() => return Observable.of(this.languages));
}
disconnect() {
// No-op
}
}
And then you can call recordChange$.next()
to initiate a refresh.
Naturally I would wrap the call in a refresh() method and call it off of the datasource instance w/in the component, and other proper techniques.
Are you using an error handler? If you're ignoring errors and try to name a sheet the same as an existing sheet or a name with invalid characters, it could be just skipping over that line. See the CleanSheetName function here
http://www.dailydoseofexcel.com/archives/2005/01/04/naming-a-sheet-based-on-a-cell/
for a list of invalid characters that you may want to check for.
Update
Other things to try: Fully qualified references, throwing in a Doevents, code cleaning. This code qualifies your Sheets reference to ThisWorkbook (you can change it to ActiveWorkbook if that suits). It also adds a thousand DoEvents (stupid overkill, but if something's taking a while to get done, this will allow it to - you may only need one DoEvents if this actually fixes anything).
Dim WS As Worksheet
Dim i As Long
With ThisWorkbook
Set WS = .Worksheets.Add(After:=.Sheets(.Sheets.Count))
End With
For i = 1 To 1000
DoEvents
Next i
WS.Name = txtSheetName.Value
Finally, whenever I have a goofy VBA problem that just doesn't make sense, I use Rob Bovey's CodeCleaner. It's an add-in that exports all of your modules to text files then re-imports them. You can do it manually too. This process cleans out any corrupted p-code that's hanging around.
Alternatively, I would suggest turning interactive on in the beginning and at the very last plot, turn it off. All will show up, but they will not disappear as your program will stay around until you close the figures.
import matplotlib.pyplot as plt
from matplotlib import interactive
plt.figure(1)
... code to make figure (1)
interactive(True)
plt.show()
plt.figure(2)
... code to make figure (2)
plt.show()
plt.figure(3)
... code to make figure (3)
interactive(False)
plt.show()
int i = 0; // Counter used to determine when you're at the 3rd gun
for (Gun g : gunList) { // For each gun in your list
System.out.println(g); // Print out the gun
if (i == 2) { // If you're at the third gun
ArrayList<Bullet> bullets = g.getBullet(); // Get the list of bullets in the gun
for (Bullet b : bullets) { // Then print every bullet
System.out.println(b);
}
i++; // Don't forget to increment your counter so you know you're at the next gun
}
I solved this error by including a get and post request in my controller: method={RequestMethod.POST, RequestMethod.GET}
If you don't want to store this anywhere, but just view the object for debugging purposes.
console.log(JSON.stringify(object, null, " "));
You can change the third parameter to adjust the indentation.
Given a staging table with 70 columns and only 4 representing duplicates, this code will return the offending columns:
SELECT
COUNT(*)
,LTRIM(RTRIM(S.TransactionDate))
,LTRIM(RTRIM(S.TransactionTime))
,LTRIM(RTRIM(S.TransactionTicketNumber))
,LTRIM(RTRIM(GrossCost))
FROM Staging.dbo.Stage S
GROUP BY
LTRIM(RTRIM(S.TransactionDate))
,LTRIM(RTRIM(S.TransactionTime))
,LTRIM(RTRIM(S.TransactionTicketNumber))
,LTRIM(RTRIM(GrossCost))
HAVING COUNT(*) > 1
.
Expanding on Chris and Migol`s answer with a code sample.
Using an array
Student[] array = new Student[2];
array[0] = new Student("bob");
array[1] = new Student("joe");
Using a generic list. Under the hood the List<T> class uses an array for storage but does so in a fashion that allows it to grow effeciently.
List<Student> list = new List<Student>();
list.Add(new Student("bob"));
list.Add(new Student("joe"));
Student joe = list[1];
It should be
r.append("\n");
But I recommend you to do as below,
r.append(System.getProperty("line.separator"));
System.getProperty("line.separator")
gives you system-dependent newline in java. Also from Java 7 there's a method that returns the value directly: System.lineSeparator()
Would have left this as a comment but I need more rep, anyways I just wanted to mention to Nicholas Peterson that perhaps passing the second argument to the Redirect call to tell it to end the response would have worked. Not the most graceful way to handle this but it does in fact work.
So
filterContext.RequestContext.HttpContext.Response.Redirect("/Login", true);
instead of
filterContext.RequestContext.HttpContext.Response.Redirect("/Login);
So you'd have this in your controller:
protected override void OnAuthorization(AuthorizationContext filterContext)
{
if(!User.IsInRole("Admin")
{
base.OnAuthorization(filterContext);
filterContext.RequestContext.HttpContext.Response.Redirect("/Login", true);
}
}
As of Python 3.6 you can just do
>>> strng = 'hi'
>>> f'{strng: <10}'
with literal string interpolation.
Or, if your padding size is in a variable, like this (thanks @Matt M.!):
>>> to_pad = 10
>>> f'{strng: <{to_pad}}'
The lock
statement is translated by C# 3.0 to the following:
var temp = obj;
Monitor.Enter(temp);
try
{
// body
}
finally
{
Monitor.Exit(temp);
}
In C# 4.0 this has changed and it is now generated as follows:
bool lockWasTaken = false;
var temp = obj;
try
{
Monitor.Enter(temp, ref lockWasTaken);
// body
}
finally
{
if (lockWasTaken)
{
Monitor.Exit(temp);
}
}
You can find more info about what Monitor.Enter
does here. To quote MSDN:
Use
Enter
to acquire the Monitor on the object passed as the parameter. If another thread has executed anEnter
on the object but has not yet executed the correspondingExit
, the current thread will block until the other thread releases the object. It is legal for the same thread to invokeEnter
more than once without it blocking; however, an equal number ofExit
calls must be invoked before other threads waiting on the object will unblock.
The Monitor.Enter
method will wait infinitely; it will not time out.
When you set keys (primary or foreign) you are setting constraints on how they can be used, which in turn limits what you can do with them. If you really want to alter the column, you could re-create the table without the constraints, although I'd recommend against it. Generally speaking, if you have a situation in which you want to do something, but it is blocked by a constraint, it's best resolved by changing what you want to do rather than the constraint.
Another option - to convert to C++ besides Shed Skin - is Pythran.
To quote High Performance Python by Micha Gorelick and Ian Ozsvald:
Pythran is a Python-to-C++ compiler for a subset of Python that includes partial
numpy
support. It acts a little like Numba and Cython—you annotate a function’s arguments, and then it takes over with further type annotation and code specialization. It takes advantage of vectorization possibilities and of OpenMP-based parallelization possibilities. It runs using Python 2.7 only.One very interesting feature of Pythran is that it will attempt to automatically spot parallelization opportunities (e.g., if you’re using a
map
), and turn this into parallel code without requiring extra effort from you. You can also specify parallel sections usingpragma omp
> directives; in this respect, it feels very similar to Cython’s OpenMP support.Behind the scenes, Pythran will take both normal Python and numpy code and attempt to aggressively compile them into very fast C++—even faster than the results of Cython.
You should note that this project is young, and you may encounter bugs; you should also note that the development team are very friendly and tend to fix bugs in a matter of hours.
YourKit Java Profiler seems to handle them too.
Short answer:
install Remote Server Administration tools on your SQL Server (it's an optional feature of Windows Server), reboot, then run SQL Server configuration manager, access the service settings for each of the services whose logon account starts with "NT Service...", clear out the password fields and restart the service. Under the covers, SQL Server Config manager will assign these virtual accounts the Log On as a Service right, and you'll be on your way.
tl;dr;
There is a catch-22 between default settings for a windows domain and default install of SQL Server 2012.
As mentioned above, default Windows domain setup will indeed prevent you from defining the "log on as a service" right via Group Policy Edit at the local machine (via GUI at least; if you install Powershell ActiveDirectory module (via Remote Server Administration tools download) you can do it by scripting.
And, by default, SQL Server 2012 setup runs services in "virtual accounts" (NT Service\ prefix, e.g, NT Service\MSSQLServer. These are like local machine accounts, not domain accounts, but you still can't assign them log on as service rights if your server is joined to a domain. SQL Server setup attempts to assign the right at install, and the SQL Server Config Management tool likewise attempts to assign the right when you change logon account.
And the beautiful catch-22 is this: SQL Server tools depend on (some component of) RSAT to assign the logon as service right. If you don't happen to have RSAT installed on your member server, SQL Server Config Manager fails silently trying to apply the setting (despite all the gaudy pre-installation verification it runs) and you end up with services that won't start.
The one hint of this requirement that I was able to find in the blizzard of SQL Server and Virtual Account doc was this: https://msdn.microsoft.com/en-us/library/ms143504.aspx#New_Accounts, search for RSAT.
You have a method called getArguments()
that belongs to Fragment
class.
My environment,
Firefox 45.9 ,
Windows 7
swagger-ui ie 3.x
I did the unzip and the petstore comes up fine in a Firefox tab. I then opened a new Firefox tab and went to File > Open File and opened my swagger.json file. The file comes up clean, ie as a file.
I then copied the 'file location' from Firefox ( ie the URL location eg: file:///D:/My%20Applications/Swagger/swagger-ui-master/dist/MySwagger.json ).
I then went back to the swagger UI tab and pasted the file location text into the swagger UI explore window and my swagger came up clean.
Hope this helps.
If I remember correctly, you have to add the following code to your form, to get rid of this problem:
<%= token_tag(nil) %>
Don't forget the parameter.
Might want to include the old A: and B: drives as you never know who might be using them! I got tired of USB drives bumping my two SDHC drives that are just for Readyboost. I had been assigning them to High letters Z: Y: with a utility that will assign drive letters to devices as you wish. I wondered.... Can I make a Readyboost drive letter A: ? YES! Can I put my second SDHC drive letter as B: ? YES!
I've used Floppy Drives back in the day, never thought that A: or B: would come in handy for Readyboost.
My point is, don't assume A: & B: will not be used by anyone for anything You might even find the old SUBST command being used!
i found this in procmail package dependencies:
apt install liblockfile-bin
To run:
dotlockfile -l file.lock
file.lock will be created.
To unlock:
dotlockfile -u file.lock
Use this to list this package files / command:
dpkg-query -L liblockfile-bin
The other answers above have answered your first question. As for your second question, how to detect an error of getting a value that is not set, I am not sure which of the following situation you mean:
Accessing an array element using an invalid index:
If you use
std::vector, you can use vector::at function instead of [] operator
to get the value, if the index is invalid, an out_of_range exception
will be thrown.
Accessing a valid index, but the element has not been set yet: As far as I know, there is no direct way of it. However, the following common practices can probably solve you problem: (1) Initializes all elements to a value that you are certain that is impossible to have. For example, if you are dealing with positive integers, set all elements to -1, so you know the value is not set yet when you find it being -1. (2). Simply use a bool array of the same size to indicate whether the element of the same index is set or not, this applies when all values are "possible".
Can use it in the way like this:
//! Define:
#define F_NUM 3
int (*pFunctions[F_NUM])(void * arg);
//! Initialise:
int someFunction(void * arg) {
int a= *((int*)arg);
return a*a;
}
pFunctions[0]= someFunction;
//! Use:
int someMethod(int idx, void * arg, int * result) {
int done= 0;
if (idx < F_NUM && pFunctions[idx] != NULL) {
*result= pFunctions[idx](arg);
done= 1;
}
return done;
}
int x= 2;
int z= 0;
someMethod(0, (void*)&x, &z);
assert(z == 4);
If you're having an issue where the Resources added are images and are not getting copied to your build folder on compiling. You need to change the "Build Action" to None from Resource ( which is the default) and change the Copy to "If Newer" or "Always" as shown below :
You can use NGBindHTML or NGbindHtmlUnsafe this will not escape the html
content of your model.
<div ng-app ng-controller="MyCtrl">
<ul>
<li ng-repeat=" opt in opts" ng-bind-html-unsafe="opt.text">
{{ opt.text }}
</li>
</ul>
<p>{{opt}}</p>
</div>
This works, anyway you should be very careful when using unsanitized
html
content, you should really trust the source of the content.
save()- As the method name suggests, hibernate save() can be used to save entity to database. We can invoke this method outside a transaction. If we use this without transaction and we have cascading between entities, then only the primary entity gets saved unless we flush the session.
persist()-Hibernate persist is similar to save (with transaction) and it adds the entity object to the persistent context, so any further changes are tracked. If the object properties are changed before the transaction is committed or session is flushed, it will also be saved into database. Also, we can use persist() method only within the boundary of a transaction, so it’s safe and takes care of any cascaded objects. Finally, persist doesn't return anything so we need to use the persisted object to get the generated identifier value.
You don't need to force unwrap the titleLabel to set it.
myButton.titleLabel?.font = UIFont(name: YourfontName, size: 20)
Since you're not using the titleLabel here, you can just optionally use it and if it's nil it will just be a no-op.
I'll also add as other people are saying, the font property is deprecated, and make sure to use setTitle:forControlState:
when setting the title text.
Swift 2.2 || Xcode 7.3
I got Amazing results!! with AlamofireImage swift library
It provides multiple features like:
and very easy to implement for your app
Step.1 Install pods
Alamofire 3.3.x
pod 'Alamofire'
AlamofireImage 2.4.x
pod 'AlamofireImage'
Step.2 import and Use
import Alamofire
import AlamofireImage
let downloadURL = NSURL(string: "http://cdn.sstatic.net/Sites/stackoverflow/company/Img/photos/big/6.jpg?v=f4b7c5fee820")!
imageView.af_setImageWithURL(downloadURL)
that's it!! it will take care everything
Great thanks to Alamofire guys, for making iDevelopers life easy ;)
I advise you to use the same JDK as you may use with Windows: the Oracle one.
http://www.oracle.com/technetwork/java/javase/downloads/index.html
Go to the Java SE 7u67 section and click on JDK7 Download button on the right.
On the new page select the option "(¤) Accept License Agreement"
Then click on jdk-7u67-linux-x64.rpm
On your CentOS, as root, run:
$ rpm -Uvh jdk-7u67-linux-x64.rpm
$ alternatives --install /usr/bin/java java /usr/java/latest/bin/java 2
You may already have a Java 5 installed on your box... before installing the downloaded rpm remove previous Java by running this command yum remove java
I had to enable HTTP Activation
in .NET Framework 4.5 Advanced Services
> WCF Services
Within your component, you can define an array of number (ES6) as described below:
export class SampleComponent {
constructor() {
this.numbers = Array(5).fill(0).map((x,i)=>i);
}
}
See this link for the array creation: Tersest way to create an array of integers from 1..20 in JavaScript.
You can then iterate over this array with ngFor
:
@View({
template: `
<ul>
<li *ngFor="let number of numbers">{{number}}</li>
</ul>
`
})
export class SampleComponent {
(...)
}
Or shortly:
@View({
template: `
<ul>
<li *ngFor="let number of [0,1,2,3,4]">{{number}}</li>
</ul>
`
})
export class SampleComponent {
(...)
}
Hope it helps you, Thierry
Edit: Fixed the fill statement and template syntax.
I like to have some visual representation of the situation to grasp these things. Maybe other developers would like to see it too, so here's my addition. I'm not totally sure that it all is correct, so please comment if you find any mistakes.
LOCAL SYSTEM
. =====================================================
================= . ================= =================== =============
REMOTE REPOSITORY . REMOTE REPOSITORY LOCAL REPOSITORY WORKING COPY
(ORIGIN) . (CACHED)
for example, . mirror of the
a github repo. . remote repo
Can also be .
multiple repo's .
.
.
FETCH *------------------>*
Your local cache of the remote is updated with the origin (or multiple
external sources, that is git's distributed nature)
.
PULL *-------------------------------------------------------->*
changes are merged directly into your local copy. when conflicts occur,
you are asked for decisions.
.
COMMIT . *<---------------*
When coming from, for example, subversion, you might think that a commit
will update the origin. In git, a commit is only done to your local repo.
.
PUSH *<---------------------------------------*
Synchronizes your changes back into the origin.
Some major advantages for having a fetched mirror of the remote are:
Using pure JPA with Hibernate 5.0.2.Final as the actual provider the following seems to work with positional parameters as well:
Entity.java:
@Entity
@NamedQueries({
@NamedQuery(name = "byAttributes", query = "select e from Entity e where e.attribute in (?1)") })
public class Entity {
@Column(name = "attribute")
private String attribute;
}
Dao.java:
public class Dao {
public List<Entity> findByAttributes(Set<String> attributes) {
Query query = em.createNamedQuery("byAttributes");
query.setParameter(1, attributes);
List<Entity> entities = query.getResultList();
return entities;
}
}
{% url namespace:url_name %}
. So, check if you have added the app_name
in urls.py.path('<int:question_id>/', views.detail, name='question_detail')
whereas the index.html file had the following entry <li><a href="{% url 'polls:detail' question.id %}">{{ question.question_text }}</a></li>
. Notice the incorrect name.Since you have not mentioned what needs to be copied, I have left that section empty in the code below.
Also you don't need to move the email to the folder first and then run the macro in that folder. You can run the macro on the incoming mail and then move it to the folder at the same time.
This will get you started. I have commented the code so that you will not face any problem understanding it.
First paste the below mentioned code in the outlook module.
Then
When the new email arrives not only will the email move to the folder that you specify but data from it will be exported to Excel as well.
UNTESTED
Const xlUp As Long = -4162
Sub ExportToExcel(MyMail As MailItem)
Dim strID As String, olNS As Outlook.Namespace
Dim olMail As Outlook.MailItem
Dim strFileName As String
'~~> Excel Variables
Dim oXLApp As Object, oXLwb As Object, oXLws As Object
Dim lRow As Long
strID = MyMail.EntryID
Set olNS = Application.GetNamespace("MAPI")
Set olMail = olNS.GetItemFromID(strID)
'~~> Establish an EXCEL application object
On Error Resume Next
Set oXLApp = GetObject(, "Excel.Application")
'~~> If not found then create new instance
If Err.Number <> 0 Then
Set oXLApp = CreateObject("Excel.Application")
End If
Err.Clear
On Error GoTo 0
'~~> Show Excel
oXLApp.Visible = True
'~~> Open the relevant file
Set oXLwb = oXLApp.Workbooks.Open("C:\Sample.xls")
'~~> Set the relevant output sheet. Change as applicable
Set oXLws = oXLwb.Sheets("Sheet1")
lRow = oXLws.Range("A" & oXLApp.Rows.Count).End(xlUp).Row + 1
'~~> Write to outlook
With oXLws
'
'~~> Code here to output data from email to Excel File
'~~> For example
'
.Range("A" & lRow).Value = olMail.Subject
.Range("B" & lRow).Value = olMail.SenderName
'
End With
'~~> Close and Clean up Excel
oXLwb.Close (True)
oXLApp.Quit
Set oXLws = Nothing
Set oXLwb = Nothing
Set oXLApp = Nothing
Set olMail = Nothing
Set olNS = Nothing
End Sub
FOLLOWUP
To extract the contents from your email body, you can split it using SPLIT() and then parsing out the relevant information from it. See this example
Dim MyAr() As String
MyAr = Split(olMail.body, vbCrLf)
For i = LBound(MyAr) To UBound(MyAr)
'~~> This will give you the contents of your email
'~~> on separate lines
Debug.Print MyAr(i)
Next i
$query = mysqli_query('SELECT TABLE_NAME FROM information_schema.TABLES WHERE TABLE_NAME IN ("table1","table2","table3") AND TABLE_SCHEMA="yourschema"');
$tablesExists = array();
while( null!==($row=mysqli_fetch_row($query)) ){
$tablesExists[] = $row[0];
}
You go around making your webpage, and keep on putting {{data bindings}} whenever you feel you would have dynamic data. Angular will then provide you a $scope handler, which you can populate (statically or through calls to the web server).
This is a good understanding of data-binding. I think you've got that down.
For simple DOM manipulation, which doesnot involve data manipulation (eg: color changes on mousehover, hiding/showing elements on click), jQuery or old-school js is sufficient and cleaner. This assumes that the model in angular's mvc is anything that reflects data on the page, and hence, css properties like color, display/hide, etc changes dont affect the model.
I can see your point here about "simple" DOM manipulation being cleaner, but only rarely and it would have to be really "simple". I think DOM manipulation is one the areas, just like data-binding, where Angular really shines. Understanding this will also help you see how Angular considers its views.
I'll start by comparing the Angular way with a vanilla js approach to DOM manipulation. Traditionally, we think of HTML as not "doing" anything and write it as such. So, inline js, like "onclick", etc are bad practice because they put the "doing" in the context of HTML, which doesn't "do". Angular flips that concept on its head. As you're writing your view, you think of HTML as being able to "do" lots of things. This capability is abstracted away in angular directives, but if they already exist or you have written them, you don't have to consider "how" it is done, you just use the power made available to you in this "augmented" HTML that angular allows you to use. This also means that ALL of your view logic is truly contained in the view, not in your javascript files. Again, the reasoning is that the directives written in your javascript files could be considered to be increasing the capability of HTML, so you let the DOM worry about manipulating itself (so to speak). I'll demonstrate with a simple example.
<div rotate-on-click="45"></div>
First, I'd just like to comment that if we've given our HTML this functionality via a custom Angular Directive, we're already done. That's a breath of fresh air. More on that in a moment.
function rotate(deg, elem) {
$(elem).css({
webkitTransform: 'rotate('+deg+'deg)',
mozTransform: 'rotate('+deg+'deg)',
msTransform: 'rotate('+deg+'deg)',
oTransform: 'rotate('+deg+'deg)',
transform: 'rotate('+deg+'deg)'
});
}
function addRotateOnClick($elems) {
$elems.each(function(i, elem) {
var deg = 0;
$(elem).click(function() {
deg+= parseInt($(this).attr('rotate-on-click'), 10);
rotate(deg, this);
});
});
}
addRotateOnClick($('[rotate-on-click]'));
app.directive('rotateOnClick', function() {
return {
restrict: 'A',
link: function(scope, element, attrs) {
var deg = 0;
element.bind('click', function() {
deg+= parseInt(attrs.rotateOnClick, 10);
element.css({
webkitTransform: 'rotate('+deg+'deg)',
mozTransform: 'rotate('+deg+'deg)',
msTransform: 'rotate('+deg+'deg)',
oTransform: 'rotate('+deg+'deg)',
transform: 'rotate('+deg+'deg)'
});
});
}
};
});
Pretty light, VERY clean and that's just a simple manipulation! In my opinion, the angular approach wins in all regards, especially how the functionality is abstracted away and the dom manipulation is declared in the DOM. The functionality is hooked onto the element via an html attribute, so there is no need to query the DOM via a selector, and we've got two nice closures - one closure for the directive factory where variables are shared across all usages of the directive, and one closure for each usage of the directive in the link
function (or compile
function).
Two-way data binding and directives for DOM manipulation are only the start of what makes Angular awesome. Angular promotes all code being modular, reusable, and easily testable and also includes a single-page app routing system. It is important to note that jQuery is a library of commonly needed convenience/cross-browser methods, but Angular is a full featured framework for creating single page apps. The angular script actually includes its own "lite" version of jQuery so that some of the most essential methods are available. Therefore, you could argue that using Angular IS using jQuery (lightly), but Angular provides much more "magic" to help you in the process of creating apps.
This is a great post for more related information: How do I “think in AngularJS” if I have a jQuery background?
The above points are aimed at the OP's specific concerns. I'll also give an overview of the other important differences. I suggest doing additional reading about each topic as well.
Angular is a framework, jQuery is a library. Frameworks have their place and libraries have their place. However, there is no question that a good framework has more power in writing an application than a library. That's exactly the point of a framework. You're welcome to write your code in plain JS, or you can add in a library of common functions, or you can add a framework to drastically reduce the code you need to accomplish most things. Therefore, a more appropriate question is:
Good frameworks can help architect your code so that it is modular (therefore reusable), DRY, readable, performant and secure. jQuery is not a framework, so it doesn't help in these regards. We've all seen the typical walls of jQuery spaghetti code. This isn't jQuery's fault - it's the fault of developers that don't know how to architect code. However, if the devs did know how to architect code, they would end up writing some kind of minimal "framework" to provide the foundation (achitecture, etc) I discussed a moment ago, or they would add something in. For example, you might add RequireJS to act as part of your framework for writing good code.
Here are some things that modern frameworks are providing:
Before I further discuss Angular, I'd like to point out that Angular isn't the only one of its kind. Durandal, for example, is a framework built on top of jQuery, Knockout, and RequireJS. Again, jQuery cannot, by itself, provide what Knockout, RequireJS, and the whole framework built on top them can. It's just not comparable.
If you need to destroy a planet and you have a Death Star, use the Death star.
Building on my previous points about what frameworks provide, I'd like to commend the way that Angular provides them and try to clarify why this is matter of factually superior to jQuery alone.
In my above example, it is just absolutely unavoidable that jQuery has to hook onto the DOM in order to provide functionality. That means that the view (html) is concerned about functionality (because it is labeled with some kind of identifier - like "image slider") and JavaScript is concerned about providing that functionality. Angular eliminates that concept via abstraction. Properly written code with Angular means that the view is able to declare its own behavior. If I want to display a clock:
<clock></clock>
Done.
Yes, we need to go to JavaScript to make that mean something, but we're doing this in the opposite way of the jQuery approach. Our Angular directive (which is in it's own little world) has "augumented" the html and the html hooks the functionality into itself.
Angular gives you a straightforward way to structure your code. View things belong in the view (html), augmented view functionality belongs in directives, other logic (like ajax calls) and functions belong in services, and the connection of services and logic to the view belongs in controllers. There are some other angular components as well that help deal with configuration and modification of services, etc. Any functionality you create is automatically available anywhere you need it via the Injector subsystem which takes care of Dependency Injection throughout the application. When writing an application (module), I break it up into other reusable modules, each with their own reusable components, and then include them in the bigger project. Once you solve a problem with Angular, you've automatically solved it in a way that is useful and structured for reuse in the future and easily included in the next project. A HUGE bonus to all of this is that your code will be much easier to test.
THANK GOODNESS. The aforementioned jQuery spaghetti code resulted from a dev that made something "work" and then moved on. You can write bad Angular code, but it's much more difficult to do so, because Angular will fight you about it. This means that you have to take advantage (at least somewhat) to the clean architecture it provides. In other words, it's harder to write bad code with Angular, but more convenient to write clean code.
Angular is far from perfect. The web development world is always growing and changing and there are new and better ways being put forth to solve problems. Facebook's React and Flux, for example, have some great advantages over Angular, but come with their own drawbacks. Nothing's perfect, but Angular has been and is still awesome for now. Just as jQuery once helped the web world move forward, so has Angular, and so will many to come.
Ensure module to be executed is installed or full path to command if it's not a node module
this is may be due to the thing that you have created your .jsp or the .html file in the WEB-INF instead of the WebContent folder.
Solution: Just replace the files that are there in the WEB-INF folder to the Webcontent folder and try executing the same - You will get the appropriate output
Thanks to KasunBG's tip, I found the solution in the "suggested" link, update the following file (replace 7.x with your Netbeans version) :
C:\Program Files\NetBeans 7.x\etc\netbeans.conf
Change the following line to point it where your java installation is :
netbeans_jdkhome="C:\Program Files\Java\jdk1.7xxxxx"
You may need Administrator privileges to edit netbeans.conf
You can do something such as:
>>> print(''.join(map(str,range(1,11))))
12345678910
.image_block {
width: 175px;
height: 175px;
position: relative;
}
.image_block a {
width: 100%;
text-align: center;
position: absolute;
bottom: 0px;
}
.image_block img {
/* nothing specific */
}
explanation: an element positioned absolutely will be relative to the closest parent which has a non-static positioning. i'm assuming you're happy with how your .image_block
displays, so we can leave the relative positioning there.
as such, the <a>
element will be positioned relative to the .image_block
, which will give us the bottom alignment. then, we text-align: center
the <a>
element, and give it a 100% width so that it is the size of .image_block
.
the <img>
within <a>
will then center appropriately.
It can be done in two ways:
1.Use clone Git
2.You can set it up manually by rearranging folders given in it. make a two separate folder 'src' and 'res' and place appropriate classes and xml file given by library. and then import project from eclipse and make it as library, that's it.
Here's a demo: http://www.w3.org/Style/Examples/007/center-example
A method (JSFiddle example)
CSS:
html, body {
margin: 0;
padding: 0;
width: 100%;
height: 100%;
display: table
}
#content {
display: table-cell;
text-align: center;
vertical-align: middle;
}
HTML:
<div id="content">
Content goes here
</div>
Another method (JSFiddle example)
CSS
body, html, #wrapper {
width: 100%;
height: 100%
}
#wrapper {
display: table
}
#main {
display: table-cell;
vertical-align: middle;
text-align:center
}
HTML
<div id="wrapper">
<div id="main">
Content goes here
</div>
</div>
I use this approach for drawing a modal overlay.
.fullDiv { width:100%; height:100%; position:fixed }
I believe the distinction here is the use of position:fixed which may or may not be applicable to your use case.
I also add z-index:1000; background:rgba(50,50,50,.7);
Then, the modal content can live inside that div, and any content that was already on the page remains visible in the background but covered by the overlay fully while scrolling.
I solved this by downloading a macro for my text editor (TextPad) that lets me highlight lines and it then inserts # at the first of each line. A similar macro removes the #'s. Some may ask why multiline is necessary but it comes in handy when you're trying to "turn off" a block of code for debugging purposes.
This is the batch script I wrote for renaming a database on Windows:
@echo off
set olddb=olddbname
set newdb=newdbname
SET count=1
SET act=mysql -uroot -e "select table_name from information_schema.tables where table_schema='%olddb%'"
mysql -uroot -e "create database %newdb%"
echo %act%
FOR /f "tokens=*" %%G IN ('%act%') DO (
REM echo %count%:%%G
echo mysql -uroot -e "RENAME TABLE %olddb%.%%G to %newdb%.%%G"
mysql -uroot -e "RENAME TABLE %olddb%.%%G to %newdb%.%%G"
set /a count+=1
)
mysql -uroot -e "drop database %olddb%"
You could use pandas plot as @Bharath suggest:
import seaborn as sns
sns.set()
df.set_index('App').T.plot(kind='bar', stacked=True)
Output:
Updated:
from matplotlib.colors import ListedColormap
df.set_index('App')\
.reindex_axis(df.set_index('App').sum().sort_values().index, axis=1)\
.T.plot(kind='bar', stacked=True,
colormap=ListedColormap(sns.color_palette("GnBu", 10)),
figsize=(12,6))
Updated Pandas 0.21.0+ reindex_axis
is deprecated, use reindex
from matplotlib.colors import ListedColormap
df.set_index('App')\
.reindex(df.set_index('App').sum().sort_values().index, axis=1)\
.T.plot(kind='bar', stacked=True,
colormap=ListedColormap(sns.color_palette("GnBu", 10)),
figsize=(12,6))
Output:
your line raising the error is here:
comment = Comment.objects.get(pk=comment_id)
you try to access a non-existing comment.
from django.shortcuts import get_object_or_404
comment = get_object_or_404(Comment, pk=comment_id)
Instead of having an error on your server, your user will get a 404 meaning that he tries to access a non existing resource.
Ok up to here I suppose you are aware of this.
Some users (and I'm part of them) let tabs running for long time, if users are authorized to delete data, it may happens. A 404 error may be a better error to handle a deleted resource error than sending an email to the admin.
Other users go to addresses from their history, (same if data have been deleted since it may happens).
arr = []
elem = int(raw_input("insert how many elements you want:"))
for i in range(0, elem):
arr.append(int(raw_input("Enter next no :")))
print arr
I know this is a bit late, but for people struggling with this, you can use the following functions:
Turn any number positive
let x = 54;
let y = -54;
let resultx = Math.abs(x); // 54
let resulty = Math.abs(y); // 54
Turn any number negative
let x = 54;
let y = -54;
let resultx = -Math.abs(x); // -54
let resulty = -Math.abs(y); // -54
Invert any number
let x = 54;
let y = -54;
let resultx = -(x); // -54
let resulty = -(y); // 54
Two issues jump out:
Your getData
never returns anything, so its promise (async
functions always return a promise) will resolve with undefined
when it resolves
The error message clearly shows you're trying to directly render the promise getData
returns, rather than waiting for it to resolve and then rendering the resolution
Addressing #1: getData
should return the result of calling json
:
async getData(){
const res = await axios('/data');
return await res.json();
}
Addressig #2: We'd have to see more of your code, but fundamentally, you can't do
<SomeElement>{getData()}</SomeElement>
...because that doesn't wait for the resolution. You'd need instead to use getData
to set state:
this.getData().then(data => this.setState({data}))
.catch(err => { /*...handle the error...*/});
...and use that state when rendering:
<SomeElement>{this.state.data}</SomeElement>
Update: Now that you've shown us your code, you'd need to do something like this:
class App extends React.Component{
async getData() {
const res = await axios('/data');
return await res.json(); // (Or whatever)
}
constructor(...args) {
super(...args);
this.state = {data: null};
}
componentDidMount() {
if (!this.state.data) {
this.getData().then(data => this.setState({data}))
.catch(err => { /*...handle the error...*/});
}
}
render() {
return (
<div>
{this.state.data ? <em>Loading...</em> : this.state.data}
</div>
);
}
}
Futher update: You've indicated a preference for using await
in componentDidMount
rather than then
and catch
. You'd do that by nesting an async
IIFE function within it and ensuring that function can't throw. (componentDidMount
itself can't be async
, nothing will consume that promise.) E.g.:
class App extends React.Component{
async getData() {
const res = await axios('/data');
return await res.json(); // (Or whatever)
}
constructor(...args) {
super(...args);
this.state = {data: null};
}
componentDidMount() {
if (!this.state.data) {
(async () => {
try {
this.setState({data: await this.getData()});
} catch (e) {
//...handle the error...
}
})();
}
}
render() {
return (
<div>
{this.state.data ? <em>Loading...</em> : this.state.data}
</div>
);
}
}
As commented by David Thomas, descendants of those child elements will (likely) inherit most of the styles assigned to those child elements.
You need to wrap your .myTestClass
inside an element and apply the styles to descendants by adding .wrapper *
descendant selector. Then, add .myTestClass > *
child selector to apply the style to the elements children, not its grand children. For example like this:
JSFiddle - DEMO
.wrapper * {_x000D_
color: blue;_x000D_
margin: 0 100px; /* Only for demo */_x000D_
}_x000D_
.myTestClass > * {_x000D_
color:red;_x000D_
margin: 0 20px;_x000D_
}
_x000D_
<div class="wrapper">_x000D_
<div class="myTestClass">Text 0_x000D_
<div>Text 1</div>_x000D_
<span>Text 1</span>_x000D_
<div>Text 1_x000D_
<p>Text 2</p>_x000D_
<div>Text 2</div>_x000D_
</div>_x000D_
<p>Text 1</p>_x000D_
</div>_x000D_
<div>Text 0</div>_x000D_
</div>
_x000D_
Sometimes this kind of error happens when you create tables with different database users and try to SELECT
with a different user.
You can grant all privileges using below query.
GRANT ALL PRIVILEGES ON ALL TABLES IN SCHEMA schema_name TO username;
And also you can grant access for DML statements
GRANT SELECT, INSERT, UPDATE, DELETE ON ALL TABLES IN SCHEMA schema_name TO username;
Try the sp_foreachdb procedure.
This answer is similar to @PaulMcG's answer but doesn't require sorting the input.
For those into functional programming, groupBy
can be written in one line (not including imports!), and unlike itertools.groupby
it doesn't require the input to be sorted:
from functools import reduce # import needed for python3; builtin in python2
from collections import defaultdict
def groupBy(key, seq):
return reduce(lambda grp, val: grp[key(val)].append(val) or grp, seq, defaultdict(list))
(The reason for ... or grp
in the lambda
is that for this reduce()
to work, the lambda
needs to return its first argument; because list.append()
always returns None
the or
will always return grp
. I.e. it's a hack to get around python's restriction that a lambda can only evaluate a single expression.)
This returns a dict whose keys are found by evaluating the given function and whose values are a list of the original items in the original order. For the OP's example, calling this as groupBy(lambda pair: pair[1], input)
will return this dict:
{'KAT': [('11013331', 'KAT'), ('9843236', 'KAT')],
'NOT': [('9085267', 'NOT'), ('11788544', 'NOT')],
'ETH': [('5238761', 'ETH'), ('5349618', 'ETH'), ('962142', 'ETH'), ('7795297', 'ETH'), ('7341464', 'ETH'), ('5594916', 'ETH'), ('1550003', 'ETH')]}
And as per @PaulMcG's answer the OP's requested format can be found by wrapping that in a list comprehension. So this will do it:
result = {key: [pair[0] for pair in values],
for key, values in groupBy(lambda pair: pair[1], input).items()}
I found that if the exception is thrown in the same method that it is caught, the stack trace is not preserved, for what it's worth.
void testExceptionHandling()
{
try
{
throw new ArithmeticException("illegal expression");
}
catch (Exception ex)
{
throw;
}
finally
{
System.Diagnostics.Debug.WriteLine("finally called.");
}
}
I wouldn't access state in the Action Creator. I would use mapStateToProps() and import the entire state object and import a combinedReducer file (or import * from './reducers';
) in the component the Action Creator is eventually going to. Then use destructuring in the component to use whatever you need from the state prop. If the Action Creator is passing the state onto a Reducer for the given TYPE, you don't need to mention state because the reducer has access to everything that is currently set in state. Your example is not updating anything. I would only use the Action Creator to pass along state from its parameters.
In the reducer do something like:
const state = this.state;
const apple = this.state.apples;
If you need to perform an action on state for the TYPE you are referencing, please do it in the reducer.
Please correct me if I'm wrong!!!
I recommend using the awesome requests library:
import requests
url = 'http://maps.googleapis.com/maps/api/directions/json'
params = dict(
origin='Chicago,IL',
destination='Los+Angeles,CA',
waypoints='Joplin,MO|Oklahoma+City,OK',
sensor='false'
)
resp = requests.get(url=url, params=params)
data = resp.json() # Check the JSON Response Content documentation below
JSON Response Content: https://requests.readthedocs.io/en/master/user/quickstart/#json-response-content
Click Run on the menu and then Edit Configurations... then click on Android Application on the left and click the + button. Choose Android Application from the pop-up menu. Then pick the module (its normally app or something like that). Then click apply and ok.
If you have more errors after that, try to re-import the project in Android Studio.
git diff > patchfile
and
patch -p1 < patchfile
work but as many people noticed in comments and other answers patch does not understand adds, deletes and renames. There is no option but git apply patchfile
if you need handle file adds, deletes and renames.
EDIT December 2015
Latest versions of patch
command (2.7, released in September 2012) support most features of the "diff --git" format, including renames and copies, permission changes, and symlink diffs (but not yet binary diffs) (release announcement).
So provided one uses current/latest version of patch
there is no need to use git
to be able to apply its diff as a patch.
You can query sqlite_master
SELECT sql FROM sqlite_master WHERE name='foo';
which will return a create table
SQL statement, for example:
$ sqlite3 mydb.sqlite
sqlite> create table foo (id int primary key, name varchar(10));
sqlite> select sql from sqlite_master where name='foo';
CREATE TABLE foo (id int primary key, name varchar(10))
sqlite> .schema foo
CREATE TABLE foo (id int primary key, name varchar(10));
sqlite> pragma table_info(foo)
0|id|int|0||1
1|name|varchar(10)|0||0
You can check for a module's installation path by:
perldoc -l XML::Simple
The problem with your one-liner is that, it is not recursively traversing directories/sub-directories. Hence, you get only pragmatic module names as output.
The error message tells you exactly what's wrong. The Python interpreter needs to know the encoding of the non-ASCII character.
If you want to return U+00A3 then you can say
return u'\u00a3'
which represents this character in pure ASCII by way of a Unicode escape sequence. If you want to return a byte string containing the literal byte 0xA3, that's
return b'\xa3'
(where in Python 2 the b
is implicit; but explicit is better than implicit).
The linked PEP in the error message instructs you exactly how to tell Python "this file is not pure ASCII; here's the encoding I'm using". If the encoding is UTF-8, that would be
# coding=utf-8
or the Emacs-compatible
# -*- encoding: utf-8 -*-
If you don't know which encoding your editor uses to save this file, examine it with something like a hex editor and some googling. The Stack Overflow character-encoding tag has a tag info page with more information and some troubleshooting tips.
In so many words, outside of the 7-bit ASCII range (0x00-0x7F), Python can't and mustn't guess what string a sequence of bytes represents. https://tripleee.github.io/8bit#a3 shows 21 possible interpretations for the byte 0xA3 and that's only from the legacy 8-bit encodings; but it could also very well be the first byte of a multi-byte encoding. But in fact, I would guess you are actually using Latin-1, so you should have
# coding: latin-1
as the first or second line of your source file. Anyway, without knowledge of which character the byte is supposed to represent, a human would not be able to guess this, either.
A caveat: coding: latin-1
will definitely remove the error message (because there are no byte sequences which are not technically permitted in this encoding), but might produce completely the wrong result when the code is interpreted if the actual encoding is something else. You really have to know the encoding of the file with complete certainty when you declare the encoding.
Landscape
@media only screen
and (min-device-width : 375px) // or 213.4375em or 3in or 9cm
and (max-device-width : 667px) // or 41.6875em
and (width : 667px) // or 41.6875em
and (height : 375px) // or 23.4375em
and (orientation : landscape)
and (color : 8)
and (device-aspect-ratio : 375/667)
and (aspect-ratio : 667/375)
and (device-pixel-ratio : 2)
and (-webkit-min-device-pixel-ratio : 2)
{ }
Portrait
@media only screen
and (min-device-width : 375px) // or 213.4375em
and (max-device-width : 667px) // or 41.6875em
and (width : 375px) // or 23.4375em
and (height : 559px) // or 34.9375em
and (orientation : portrait)
and (color : 8)
and (device-aspect-ratio : 375/667)
and (aspect-ratio : 375/559)
and (device-pixel-ratio : 2)
and (-webkit-min-device-pixel-ratio : 2)
{ }
if you prefer you can use (device-width : 375px)
and (device-height: 559px)
in place of the min-
and max-
settings.
It is not necessary to use all of these settings, and these are not all the possible settings. These are just the majority of possible options so you can pick and choose whichever ones meet your needs.
User Agent
tested with my iPhone 6 (model MG6G2LL/A) with iOS 9.0 (13A4305g)
# Safari
Mozilla/5.0 (iPhone; CPU iPhone OS 9_0 like Mac OS X) AppleWebKit/601.1.39 (KHTML, like Gecko) Version/9.0 Mobile/13A4305g Safari 601.1
# Google Chrome
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.53.11 (KHTML, like Gecko) Version/5.1.3 Safari/534.53.10 (000102)
# Mercury
Mozilla/5.0 (iPhone; CPU iPhone OS 7_0_4 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11B554a Safari/9537.53
Launch images
App icon
Landscape
@media only screen
and (min-device-width : 414px)
and (max-device-width : 736px)
and (orientation : landscape)
and (-webkit-min-device-pixel-ratio : 3)
{ }
Portrait
@media only screen
and (min-device-width : 414px)
and (max-device-width : 736px)
and (device-width : 414px)
and (device-height : 736px)
and (orientation : portrait)
and (-webkit-min-device-pixel-ratio : 3)
and (-webkit-device-pixel-ratio : 3)
{ }
Launch images
App icon
@media only screen
and (max-device-width: 640px),
only screen and (max-device-width: 667px),
only screen and (max-width: 480px)
{ }
According to the Apple website the iPhone 6 Plus will have 401 pixels-per-inch and be 1920 x 1080. The smaller version of the iPhone 6 will be 1334 x 750 with 326 PPI.
So, assuming that information is correct, we can write a media query for the iPhone 6:
@media screen
and (min-device-width : 1080px)
and (max-device-width : 1920px)
and (min-resolution: 401dpi)
and (device-aspect-ratio:16/9)
{ }
@media screen
and (min-device-width : 750px)
and (max-device-width : 1334px)
and (min-resolution: 326dpi)
{ }
Note that device-aspect-ratio will be deprecated in http://dev.w3.org/csswg/mediaqueries-4/ and replaced with aspect-ratio
Min-width and max-width may be something like 1704 x 960.
Specs on the Watch are still a bit speculative since (as far as I'm aware) there has been no official spec sheet yet. But Apple did mention in this press release that the Watch will be available in two sizes.. 38mm and 42mm.
Further assuming.. that those sizes refer to the screen size rather than the overall size of the Watch face these media queries should work.. And I'm sure you could give or take a few millimeters to cover either scenario without sacrificing any unwanted targeting because..
@media (!small) and (damn-small), (omfg) { }
or
@media
(max-device-width:42mm)
and (min-device-width:38mm)
{ }
It's worth noting that Media Queries Level 4 from W3C currently only available as a first public draft, once available for use will bring with it a lot of new features designed with smaller wearable devices like this in mind.
I had the same problem, with which I struggled for few days, reading all the blog posts, watching videos and finally after i changed my uno board, it worked perfectly well. But before I did that, there were a few things I tried, which I think also had an effect.
Hope this answer helps you.
Old topic, but never clearly answered. I've been working on similar as well, and found the solution:
The pipe (|) in this code sample from Austin isn't the delimiter, but to pipe the ForEach-Object, so if you want to use it as delimiter, you need to do this:
Import-Csv H:\Programs\scripts\SomeText.csv -delimiter "|" |`
ForEach-Object {
$Name += $_.Name
$Phone += $_."Phone Number"
}
Spent a good 15 minutes on this myself before I understood what was going on. Hope the answer helps the next person reading this avoid the wasted minutes! (Sorry for expanding on your comment Austin)
If you don't insist on using pure Javascript, you can build a sequential code in Livescript and it looks pretty good. You might want to take a look at this example:
# application
do
i = 3
console.log td!, "start"
<- :lo(op) ->
console.log td!, "hi #{i}"
i--
<- wait-for \something
if i is 0
return op! # break
lo(op)
<- sleep 1500ms
<- :lo(op) ->
console.log td!, "hello #{i}"
i++
if i is 3
return op! # break
<- sleep 1000ms
lo(op)
<- sleep 0
console.log td!, "heyy"
do
a = 8
<- :lo(op) ->
console.log td!, "this runs in parallel!", a
a--
go \something
if a is 0
return op! # break
<- sleep 500ms
lo(op)
Output:
0ms : start
2ms : hi 3
3ms : this runs in parallel! 8
3ms : hi 2
505ms : this runs in parallel! 7
505ms : hi 1
1007ms : this runs in parallel! 6
1508ms : this runs in parallel! 5
2009ms : this runs in parallel! 4
2509ms : hello 0
2509ms : this runs in parallel! 3
3010ms : this runs in parallel! 2
3509ms : hello 1
3510ms : this runs in parallel! 1
4511ms : hello 2
4511ms : heyy
Probably one of the indexes is wrong, either the inner one or the outer one.
I suspect you mean to say [0]
where you say [1]
and [1]
where you say [2]
. Indexes are 0-based in Python.
function make_call()
{
// do the request
setTimeout(function(){
make_call();
}, 5000);
}
$(document).ready(function() {
make_call();
});
you can find multiple options listed at http://httpd.apache.org/docs/current/platform/windows.html#down
ApacheHaus Apache Lounge BitNami WAMP Stack WampServer XAMPP
Your code doesn't work for binary files because they can't be cast to strings in the data event handler. If you need to manipulate binary files you'll need to use a buffer. Sorry, I do not have an example of using a buffer because in my case I needed to manipulate HTML files. I just check the content type and then for text/html files update them as needed:
app.get('/*', function(clientRequest, clientResponse) {
var options = {
hostname: 'google.com',
port: 80,
path: clientRequest.url,
method: 'GET'
};
var googleRequest = http.request(options, function(googleResponse) {
var body = '';
if (String(googleResponse.headers['content-type']).indexOf('text/html') !== -1) {
googleResponse.on('data', function(chunk) {
body += chunk;
});
googleResponse.on('end', function() {
// Make changes to HTML files when they're done being read.
body = body.replace(/google.com/gi, host + ':' + port);
body = body.replace(
/<\/body>/,
'<script src="http://localhost:3000/new-script.js" type="text/javascript"></script></body>'
);
clientResponse.writeHead(googleResponse.statusCode, googleResponse.headers);
clientResponse.end(body);
});
}
else {
googleResponse.pipe(clientResponse, {
end: true
});
}
});
googleRequest.end();
});
BigDecimal does not seem to respect Locale settings.
Locale.getDefault(); //returns sl_SI
Slovenian locale should have a decimal comma. Guess I had strange misconceptions regarding numbers.
a = new BigDecimal("1,2") //throws exception
a = new BigDecimal("1.2") //is ok
a.toPlainString() // returns "1.2" always
I have edited a part of my message that made no sense since it proved to be due the human error (forgot to commit data and was looking at the wrong thing).
Same as BigDecimal can be said for any Java .toString() functions. I guess that is good in some ways. Serialization for example or debugging. There is an unique string representation.
Also as others mentioned using formatters works OK. Just use formatters, same for the JSF frontend, formatters do the job properly and are aware of the locale.
I will try to explain the static thing to you. First of all static variables do not belong to any particular instance of the class. They are recognized with the name of the class. Static methods again do not belong again to any particular instance. They can access only static variables. Imagine you call MyClass.myMethod() and myMethod is a static method. If you use non-static variables inside the method, how the hell on earth would it know which variables to use? That's why you can use from static methods only static variables. I repeat again they do NOT belong to any particular instance.
I stopped using DECODE
several years ago because it is non-portable. Also, it is less flexible and less readable than a CASE/WHEN
.
However, there is one neat "trick" you can do with decode because of how it deals with NULL. In decode, NULL is equal to NULL. That can be exploited to tell whether two columns are different as below.
select a, b, decode(a, b, 'true', 'false') as same
from t;
A B SAME
------ ------ -----
1 1 true
1 0 false
1 false
null null true
Oddly enough, the issue for me was I was trying to open 2012 SQL Server Integration Services on SSMS 2008 R2. When I opened the same in SSMS 2012, it connected right away.
I found it much easier to use tokens than SSH keys. I couldn't find much good documentation on this, so I came across this solution mainly through trial and error. Further, installing from pip and setuptools have some subtle differences; but this way should work for both.
GitHub don't (currently, as of August 2016) offer an easy way to get the zip / tarball of private repositories. So you need to point setuptools to tell setuptools that you're pointing to a Git repository:
from setuptools import setup
import os
# Get the deploy key from https://help.github.com/articles/git-automation-with-oauth-tokens/
github_token = os.environ['GITHUB_TOKEN']
setup(
# ...
install_requires='package',
dependency_links = [
'git+https://{github_token}@github.com/user/{package}.git/@{version}#egg={package}-0'
.format(github_token=github_token, package=package, version=master)
]
A couple of notes here:
0
) at the end of the link, even if there's isn't any package on PyPI. This has to be a actual number, not a word.git+
to tell setuptools it's to clone the repository, rather than pointing at a zip / tarballversion
can be a branch, a tag, or a commit hash--process-dependency-links
if installing from pipThe following definition might be more efficient than the first solution proposed
def new_list_from_intervals(original_list, *intervals):
n = sum(j - i for i, j in intervals)
new_list = [None] * n
index = 0
for i, j in intervals :
for k in range(i, j) :
new_list[index] = original_list[k]
index += 1
return new_list
then you can use it like below
new_list = new_list_from_intervals(original_list, (0,2), (4,5), (6, len(original_list)))
As per latest Ansible Version 2.5, to check if a variable is defined and depending upon this if you want to run any task, use undefined
keyword.
tasks:
- shell: echo "I've got '{{ foo }}' and am not afraid to use it!"
when: foo is defined
- fail: msg="Bailing out. this play requires 'bar'"
when: bar is undefined
A little late to the party, found this while looking for an example of the marker click event. The undefined error the original poster got is because the onClick function is referred to before it's defined. Swap line 2 and 3 and it should work.
TemplateBinding is a shorthand for Binding with TemplatedParent but it does not expose all the capabilities of the Binding class, for example you can't control Binding.Mode from TemplateBinding.
How about this?
public static bool IsInteger(double number) {
return number == Math.Truncate(number);
}
Same code for decimal
.
Mark Byers made a good point, actually: this may not be what you really want. If what you really care about is whether a number rounded to the nearest two decimal places is an integer, you could do this instead:
public static bool IsNearlyInteger(double number) {
return Math.Round(number, 2) == Math.Round(number);
}
What is the difference between Git and GitHub?
Git is a distributed version control system. It usually runs at the command line of your local machine. It keeps track of your files and modifications to those files in a "repository" (or "repo"), but only when you tell it to do so. (In other words, you decide which files to track and when to take a "snapshot" of any modifications.)
In contrast, GitHub is a website that allows you to publish your Git repositories online, which can be useful for many reasons (see #3).
Is Git saving every repository locally (in the user's machine) and in GitHub?
Git is known as a "distributed" (rather than "centralized") version control system because you can run it locally and disconnected from the Internet, and then "push" your changes to a remote system (such as GitHub) whenever you like. Thus, repo changes only appear on GitHub when you manually tell Git to push those changes.
Can you use Git without GitHub? If yes, what would be the benefit for using GitHub?
Yes, you can use Git without GitHub. Git is the "workhorse" program that actually tracks your changes, whereas GitHub is simply hosting your repositories (and provides additional functionality not available in Git). Here are some of the benefits of using GitHub:
How does Git compare to a backup system such as Time Machine?
Git does backup your files, though it gives you much more granular control than a traditional backup system over what and when you backup. Specifically, you "commit" every time you want to take a snapshot of changes, and that commit includes both a description of your changes and the line-by-line details of those changes. This is optimal for source code because you can easily see the change history for any given file at a line-by-line level.
Is this a manual process, in other words if you don't commit you won't have a new version of the changes made?
Yes, this is a manual process.
If are not collaborating and you are already using a backup system why would you use Git?
For getting started with Git, I recommend the online book Pro Git as well as GitRef as a handy reference guide. For getting started with GitHub, I like the GitHub's Bootcamp and their GitHub Guides. Finally, I created a short videos series to introduce Git and GitHub to beginners.
From Maven - Settings Reference
The repositories for download and deployment are defined by the repositories
and distributionManagement
elements of the POM. However, certain settings such as username and password should not be distributed along with the pom.xml. This type of information should exist on the build server in the settings.xml.
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0
http://maven.apache.org/xsd/settings-1.0.0.xsd">
...
<servers>
<server>
<id>server001</id>
<username>my_login</username>
<password>my_password</password>
<privateKey>${user.home}/.ssh/id_dsa</privateKey>
<passphrase>some_passphrase</passphrase>
<filePermissions>664</filePermissions>
<directoryPermissions>775</directoryPermissions>
<configuration></configuration>
</server>
</servers>
...
</settings>
id: This is the ID of the server (not of the user to login as) that matches the id element of the repository/mirror that Maven tries to connect to.
username, password: These elements appear as a pair denoting the login and password required to authenticate to this server.
privateKey, passphrase: Like the previous two elements, this pair specifies a path to a private key (default is ${user.home}/.ssh/id_dsa
) and a passphrase, if required. The passphrase and password elements may be externalized in the future, but for now they must be set plain-text in the settings.xml file.
filePermissions, directoryPermissions: When a repository file or directory is created on deployment, these are the permissions to use. The legal values of each is a three digit number corrosponding to *nix file permissions, ie. 664, or 775.
Note: If you use a private key to login to the server, make sure you omit the element. Otherwise, the key will be ignored.
All you should need is the id
, username
and password
The id
and URL
should be defined in your pom.xml
like this:
<repositories>
...
<repository>
<id>acme-nexus-releases</id>
<name>acme nexus</name>
<url>https://nexus.acme.net/content/repositories/releases</url>
</repository>
...
</repositories>
If you need a username and password to your server, you should encrypt it. Maven Password Encryption
I had the same problem then I found that I wasn´t hitting the node server command in the proper directory where the server.js is located.
Hope this helps.
For iOS SWIFT I found this helpful,
let phoneRegEx = "^((\\+)|(00)|(\\*)|())[0-9]{3,14}((\\#)|())$"
When in a window, go to GO ---> ENTER LOCATION... And then copy paste this: /opt/lampp/htdocs
Now you are at the htdocs folder. Then you can add your files there, or in a new folder inside this one (for example "myproyects" folder and inside it your files... and then from a navigator you access it by writting: localhost/myproyects/nameofthefile.php
What I did to find it easily everytime, was right click on "myproyects" folder and "Make link..."... then I moved this link I created to the Desktop and then I didn't have to go anymore to the htdocs, but just enter the folder I created in my Desktop.
Hope it helps!!
This is the most comprehensive AngularJS learning resource repository I've come across:
To pluck out the best parts (in recommended order of learning):
I searched for multiple options to get my git reset to specific commit, but most of them aren't so satisfactory.
I generally use this to reset the git to the specific commit in source tree.
select commit to reset on sourcetree.
In dropdowns select the active branch , first Parent Only
And right click on "Reset branch to this commit" and select hard reset option (soft, mixed and hard)
and then go to terminal git push -f
You should be all set!
yeah it works for me as well.
Note : we need to use window.parent.document
$("button", window.parent.document).click(function()
{
alert("Functionality defined by def");
});
Firstly, your URL definition does not accept any parameters at all. If you want parameters to be passed from the URL into the view, you need to define them in the urlconf.
Secondly, it's not at all clear what you are expecting to happen to the cleaned_data dictionary. Don't forget you can't redirect to a POST - this is a limitation of HTTP, not Django - so your cleaned_data either needs to be a URL parameter (horrible) or, slightly better, a series of GET parameters - so the URL would be in the form:
/link/mybackend/?field1=value1&field2=value2&field3=value3
and so on. In this case, field1, field2 and field3 are not included in the URLconf definition - they are available in the view via request.GET
.
So your urlconf would be:
url(r'^link/(?P<backend>\w+?)/$', my_function)
and the view would look like:
def my_function(request, backend):
data = request.GET
and the reverse would be (after importing urllib
):
return "%s?%s" % (redirect('my_function', args=(backend,)),
urllib.urlencode(form.cleaned_data))
Edited after comment
The whole point of using redirect and reverse, as you have been doing, is that you go to the URL - it returns an Http code that causes the browser to redirect to the new URL, and call that.
If you simply want to call the view from within your code, just do it directly - no need to use reverse at all.
That said, if all you want to do is store the data, then just put it in the session:
request.session['temp_data'] = form.cleaned_data
You can run OpenSSH on Cygwin, and even install it as a Windows service.
I once used it this way to easily add backups of a Unix system - it would rsync a bunch of files onto the Windows server, and the Windows server had full tape backups.
Returns a QuerySet that returns dictionaries
, rather than model instances, when used as an iterable.
Returns a QuerySet that returns list of tuples
, rather than model instances, when used as an iterable.
distinct are used to eliminate the duplicate
elements.
Example:
>>> list(Article.objects.values_list('id', flat=True)) # flat=True will remove the tuples and return the list
[1, 2, 3, 4, 5, 6]
>>> list(Article.objects.values('id'))
[{'id':1}, {'id':2}, {'id':3}, {'id':4}, {'id':5}, {'id':6}]
PyExecJS is able to use each of PyV8, Node, JavaScriptCore, SpiderMonkey, JScript.
>>> import execjs
>>> execjs.eval("'red yellow blue'.split(' ')")
['red', 'yellow', 'blue']
>>> execjs.get().name
'Node.js (V8)'
It is possible to redirect from an iframe, but not to get information from the parent.
Make sure that the https://176.66.3.69:6443/ have a valid certificate. you can check it via browser firstly if it works in browser it will work in java.
that is working for me
You need to create a new personalized layout for your spinner items, like this, I will name it:
spinner_item.xml:
<TextView xmlns:android="http://schemas.android.com/apk/res/android"
android:id="@android:id/text1"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:textSize="20sp"
android:textColor="#ff0000" />
Then on your spinner declaration, you need to make your spinner use the new layout in the adapter:
ArrayAdapter adapter = ArrayAdapter.createFromResource(this,
R.layout.spinner_item, YOUR_SPINNER_CONTENT);
spinner.setAdapter(adapter);
To personalize elements from the dropdown list, you need to create another layout, I will name it spinner_dropdown_item.xml:
<CheckedTextView xmlns:android="http://schemas.android.com/apk/res/android"
android:id="@android:id/text1"
style="?android:attr/spinnerDropDownItemStyle"
android:singleLine="true"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:ellipsize="marquee"
android:textColor="#aa66cc"/>
and then on the adapter:
ArrayAdapter adapter = ArrayAdapter.createFromResource(this,
R.layout.spinner_item, YOUR_SPINNER_CONTENT);
adapter.setDropDownViewResource(R.layout.spinner_dropdown_item);
spinner.setAdapter(adapter);
select *
from blah
where DatetimeField between '22/02/2009 09:00:00.000' and '23/05/2009 10:30:00.000'
Depending on the country setting for the login, the month/day may need to be swapped around.
foreach (DataGridViewRow row in dataGridView1.Rows)
{
if (row.Selected)
{
foreach (DataGridViewCell cell in row.Cells)
{
int index = cell.ColumnIndex;
if (index == 0)
{
value = cell.Value.ToString();
//do what you want with the value
}
}
}
}
Use this code ;
String mydate = java.text.DateFormat.getDateTimeInstance().format(Calendar.getInstance().getTime());
This will shown as :
Feb 5, 2013 12:39:02PM
Just do Ctrl + Enter inside the text box
The answers here are kind of all over the map, and try to accomplish several different things. I'll just point you to the answer I recently gave that discusses the forced rounding UP -- i.e., no rounding toward zero at all. The answers in here cover different types of rounding, and ana's answer for example is for forced rounding up.
To be clear, the original question was how to "round normally" -- so, "for value > 0.5, round up. And for value < 0.5, round down".
The answer that I link to there discusses forced rounding up, which you sometimes also want to do. Whereas Excel's normal ROUND uses round-half-up, its ROUNDUP uses round-away-from-zero. So here are two functions that imitate ROUNDUP in VBA, the second of which only rounds to a whole number.
Function RoundUpVBA(InputDbl As Double, Digits As Integer) As Double
If InputDbl >= O Then
If InputDbl = Round(InputDbl, Digits) Then RoundUpVBA = InputDbl Else RoundUpVBA = Round(InputDbl + 0.5 / (10 ^ Digits), Digits)
Else
If InputDbl = Round(InputDbl, Digits) Then RoundUpVBA = InputDbl Else RoundUpVBA = Round(InputDbl - 0.5 / (10 ^ Digits), Digits)
End If
End Function
Or:
Function RoundUpToWhole(InputDbl As Double) As Integer
Dim TruncatedDbl As Double
TruncatedDbl = Fix(InputDbl)
If TruncatedDbl <> InputDbl Then
If TruncatedDbl >= 0 Then RoundUpToWhole = TruncatedDbl + 1 Else RoundUpToWhole = TruncatedDbl - 1
Else
RoundUpToWhole = TruncatedDbl
End If
End Function
Some of the answers above cover similar territory, but these here are self-contained. I also discuss in my other answer some one-liner quick-and-dirty ways to round up.
Use a packet analyzer to intercept the packets to/from somewhere.com
. Studying those packets should tell you what is going on.
Time-outs or connections refused could mean that the remote host is too busy.
The sample mvcmusicstore.codeplex.com opened in vs2015 missed some references, one of them System.web.mvc.
The fix for this was to remove it from the references and to add a reference: choose Extentions under Assemblies, there you can find and add System.Web.Mvc.
(The other assemblies I added with the nuget packages.)
Restarting the adb server, Eclipse, and device did the trick for me.
C:\Android\android-sdk\platform-tools>adb kill-server
C:\Android\android-sdk\platform-tools>adb start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
I had the same problem as mentioned on this question.
even adding a return statement brings up this exception, for which only solution is this code:
if(!response.isCommitted())
// Place another redirection
You can use jquery-validate.js . The following is the code snippet from jquery-validate.js.
// ajax mode: abort
// usage: $.ajax({ mode: "abort"[, port: "uniqueport"]});
// if mode:"abort" is used, the previous request on that port (port can be undefined) is aborted via XMLHttpRequest.abort()
var pendingRequests = {},
ajax;
// Use a prefilter if available (1.5+)
if ( $.ajaxPrefilter ) {
$.ajaxPrefilter(function( settings, _, xhr ) {
var port = settings.port;
if ( settings.mode === "abort" ) {
if ( pendingRequests[port] ) {
pendingRequests[port].abort();
}
pendingRequests[port] = xhr;
}
});
} else {
// Proxy ajax
ajax = $.ajax;
$.ajax = function( settings ) {
var mode = ( "mode" in settings ? settings : $.ajaxSettings ).mode,
port = ( "port" in settings ? settings : $.ajaxSettings ).port;
if ( mode === "abort" ) {
if ( pendingRequests[port] ) {
pendingRequests[port].abort();
}
pendingRequests[port] = ajax.apply(this, arguments);
return pendingRequests[port];
}
return ajax.apply(this, arguments);
};
}
So that you just only need to set the parameter mode to abort when you are making ajax request.
Ref:https://cdnjs.cloudflare.com/ajax/libs/jquery-validate/1.14.0/jquery.validate.js
You can do union
or simple list comprehension
[A.add(_) for _ in B]
A would have all the elements of B
Had the same problem, tried the solution above but though it worked generally, for some reason I was getting permission denial on Uri content provider for some images although I had the android.permission.MANAGE_DOCUMENTS
permission added properly.
Anyway found other solution which is to force opening image gallery instead of KITKAT documents view with :
// KITKAT
i = new Intent(Intent.ACTION_PICK,android.provider.MediaStore.Images.Media.EXTERNAL_CONTENT_URI);
startActivityForResult(i, CHOOSE_IMAGE_REQUEST);
and then load the image:
Uri selectedImageURI = data.getData();
input = c.getContentResolver().openInputStream(selectedImageURI);
BitmapFactory.decodeStream(input , null, opts);
EDIT
ACTION_OPEN_DOCUMENT
might require you to persist permissions flags etc and generally often results in Security Exceptions...
Other solution is to use the ACTION_GET_CONTENT
combined with c.getContentResolver().openInputStream(selectedImageURI)
which will work both on pre-KK and KK. Kitkat will use new documents view then and this solution will work with all apps like Photos, Gallery, File Explorer, Dropbox, Google Drive etc...) but remember that when using this solution you have to create image in your onActivityResult()
and store it on SD Card for example. Recreating this image from saved uri on next app launch would throw Security Exception on content resolver even when you add permission flags as described in Google API docs (that's what happened when I did some testing)
Additionally the Android Developer API Guidelines suggest:
ACTION_OPEN_DOCUMENT is not intended to be a replacement for ACTION_GET_CONTENT. The one you should use depends on the needs of your app:
Use ACTION_GET_CONTENT if you want your app to simply read/import data. With this approach, the app imports a copy of the data, such as an image file.
Use ACTION_OPEN_DOCUMENT if you want your app to have long term, persistent access to documents owned by a document provider. An example would be a photo-editing app that lets users edit images stored in a document provider.
Regarding client timeouts and the use of XACT_ABORT to handle them, in my opinion there is at least one very good reason to have timeouts in client APIs like SqlClient, and that is to guard the client application code from deadlocks occurring in SQL server code. In this case the client code has no fault, but has to protect it self from blocking forever waiting for the command to complete on the server. So conversely, if client timeouts have to exist to protect client code, so does XACT_ABORT ON has to protect server code from client aborts, in case the server code takes longer to execute than the client is willing to wait for.
This answer should be more of a comment against Dawn Song's comment earlier, but since I don't have enough reputation, I'm going to write it as an answer.
According to the forum page
https://forums.developer.apple.com/thread/11313
"In general, you should never just delete the CoreSimulator/Devices directory yourself. If you really absolutely must, you need to make sure that the service is not runnign while you do that. eg:"
# Quit Xcode.app, Simulator.app, etc
sudo killall -9 com.apple.CoreSimulator.CoreSimulatorService
rm -rf ~/Library/*/CoreSimulator
I definitely ran into this issue after deleting and reinstalling Xcode.
You might encounter a problem trying to connect the build to a simulator device. The thread also answers what to do in that case,
gem install snapshot
fastlane snapshot reset_simulators
Did you try this tip?
Or better still, use ipython, and call:
from IPython.Debugger import Tracer; debug_here = Tracer()
then you can just use
debug_here()
whenever you want to set a breakpoint
Here's some examples:
decimal a = 1.994444M;
Math.Round(a, 2); //returns 1.99
decimal b = 1.995555M;
Math.Round(b, 2); //returns 2.00
You might also want to look at bankers rounding / round-to-even with the following overload:
Math.Round(a, 2, MidpointRounding.ToEven);
There's more information on it here.
This is for Phonegap 3.0.x to 3.3.x. For PhoneGap 3.4.0 and higher see below.
Found part of the answer here, at Phonegap documentation. The full process is the following:
Open a command line window, and go to /path/to/your/project/platforms/android/cordova.
Run build --release
. This creates an unsigned release APK at /path/to/your/project/platforms/android/bin folder, called YourAppName-release-unsigned.apk.
Sign and align the APK using the instructions at android developer official docs.
Thanks to @LaurieClark for the link (http://iphonedevlog.wordpress.com/2013/08/16/using-phonegap-3-0-cli-on-mac-osx-10-to-build-ios-and-android-projects/), and the blogger who post it, because it put me on the track.
You can do
var arr = _.values(obj);
For documentation see here.
Make sure you disable custom errors. This can mask the original problem in your code:
change
<customErrors defaultRedirect="~/Error" mode="On">
to
<customErrors defaultRedirect="~/Error" mode="Off">
I currently have Xcode 4.6.3 and 5.0 installed. I used the following bash script to link 5.0 to the SDKs in the old version:
platforms_path="$1/Contents/Developer/Platforms";
if [ -d $platforms_path ]; then
for platform in `ls $platforms_path`
do
sudo ln -sf $platforms_path/$platform/Developer/SDKs/* $(xcode-select --print-path)/Platforms/$platform/Developer/SDKs;
done;
fi;
You just need to supply it with the path to the .app:
./xcode.sh /Applications/Xcode-463.app
A SELECT INTO
statement creates the table for you. There is no need for the CREATE TABLE
statement before hand.
What is happening is that you create #ivmy_cash_temp1
in your CREATE
statement, then the DB tries to create it for you when you do a SELECT INTO
. This causes an error as it is trying to create a table that you have already created.
Either eliminate the CREATE TABLE
statement or alter your query that fills it to use INSERT INTO SELECT
format.
If you need a unique ID added to your new row then it's best to use SELECT INTO
... since IDENTITY()
only works with this syntax.
You can use this code:
<select id="menu" name="links" size="1" onchange="window.location.href=this.value;">
<option value="URL">Book</option>
<option value="URL">Pen</option>
<option value="URL">Read</option>
<option value="URL">Apple</option>
</select>
The simplest way would be to use https://github.com/mitchellh/mapstructure
import "github.com/mitchellh/mapstructure"
mapstructure.Decode(myData, &result)
If you want to do it yourself, you could do something like this:
http://play.golang.org/p/tN8mxT_V9h
func SetField(obj interface{}, name string, value interface{}) error {
structValue := reflect.ValueOf(obj).Elem()
structFieldValue := structValue.FieldByName(name)
if !structFieldValue.IsValid() {
return fmt.Errorf("No such field: %s in obj", name)
}
if !structFieldValue.CanSet() {
return fmt.Errorf("Cannot set %s field value", name)
}
structFieldType := structFieldValue.Type()
val := reflect.ValueOf(value)
if structFieldType != val.Type() {
return errors.New("Provided value type didn't match obj field type")
}
structFieldValue.Set(val)
return nil
}
type MyStruct struct {
Name string
Age int64
}
func (s *MyStruct) FillStruct(m map[string]interface{}) error {
for k, v := range m {
err := SetField(s, k, v)
if err != nil {
return err
}
}
return nil
}
func main() {
myData := make(map[string]interface{})
myData["Name"] = "Tony"
myData["Age"] = int64(23)
result := &MyStruct{}
err := result.FillStruct(myData)
if err != nil {
fmt.Println(err)
}
fmt.Println(result)
}
Update:
if (localStorage.hasOwnProperty("username")) {
//
}
Another way, relevant when value is not expected to be empty string, null or any other falsy value:
if (localStorage["username"]) {
//
}
I am also using nunique
but it will be very helpful if you have to use an aggregate function like 'min', 'max', 'count' or 'mean'
etc.
df.groupby('YEARMONTH')['CLIENTCODE'].transform('nunique') #count(distinct)
df.groupby('YEARMONTH')['CLIENTCODE'].transform('min') #min
df.groupby('YEARMONTH')['CLIENTCODE'].transform('max') #max
df.groupby('YEARMONTH')['CLIENTCODE'].transform('mean') #average
df.groupby('YEARMONTH')['CLIENTCODE'].transform('count') #count
this solution also considered the case that url is empty and disabled(gray) the empty link.
$(function() {_x000D_
changeAnchor();_x000D_
});_x000D_
_x000D_
function changeAnchor() {_x000D_
$("a[name$='aWebsiteUrl']").each(function() { // you can write your selector here_x000D_
$(this).css("background", "none");_x000D_
$(this).css("font-weight", "normal");_x000D_
_x000D_
var url = $(this).attr('href').trim();_x000D_
if (url == " " || url == "") { //disable empty link_x000D_
$(this).attr("class", "disabled");_x000D_
$(this).attr("href", "javascript:void(0)");_x000D_
} else {_x000D_
$(this).attr("target", "_blank");// HERE set the non-empty links, open in new window_x000D_
}_x000D_
});_x000D_
}
_x000D_
a.disabled {_x000D_
text-decoration: none;_x000D_
pointer-events: none;_x000D_
cursor: default;_x000D_
color: grey;_x000D_
}
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script>_x000D_
<a name="aWebsiteUrl" href="http://www.baidu.com" class='#'>[website]</a>_x000D_
<a name="aWebsiteUrl" href=" " class='#'>[website]</a>_x000D_
<a name="aWebsiteUrl" href="http://www.alibaba.com" class='#'>[website]</a>_x000D_
<a name="aWebsiteUrl" href="http://www.qq.com" class='#'>[website]</a>
_x000D_
Just to extend on the WiredPrairie's answer a little, a mini component that can be opened and closed.
Can be used like:
<Pretty data={this.state.data}/>
export default React.createClass({
style: {
backgroundColor: '#1f4662',
color: '#fff',
fontSize: '12px',
},
headerStyle: {
backgroundColor: '#193549',
padding: '5px 10px',
fontFamily: 'monospace',
color: '#ffc600',
},
preStyle: {
display: 'block',
padding: '10px 30px',
margin: '0',
overflow: 'scroll',
},
getInitialState() {
return {
show: true,
};
},
toggle() {
this.setState({
show: !this.state.show,
});
},
render() {
return (
<div style={this.style}>
<div style={this.headerStyle} onClick={ this.toggle }>
<strong>Pretty Debug</strong>
</div>
{( this.state.show ?
<pre style={this.preStyle}>
{JSON.stringify(this.props.data, null, 2) }
</pre> : false )}
</div>
);
}
});
A more modern approach (now that createClass is on the way out)
import styles from './DebugPrint.css'
import autoBind from 'react-autobind'
import classNames from 'classnames'
import React from 'react'
export default class DebugPrint extends React.PureComponent {
constructor(props) {
super(props)
autoBind(this)
this.state = {
show: false,
}
}
toggle() {
this.setState({
show: !this.state.show,
});
}
render() {
return (
<div style={styles.root}>
<div style={styles.header} onClick={this.toggle}>
<strong>Debug</strong>
</div>
{this.state.show
? (
<pre style={styles.pre}>
{JSON.stringify(this.props.data, null, 2) }
</pre>
)
: null
}
</div>
)
}
}
And your style file
.root { backgroundColor: '#1f4662'; color: '#fff'; fontSize: '12px'; }
.header { backgroundColor: '#193549'; padding: '5px 10px'; fontFamily: 'monospace'; color: '#ffc600'; }
.pre { display: 'block'; padding: '10px 30px'; margin: '0'; overflow: 'scroll'; }
In Notepad++ :
<option value value='1' >A
<option value value='2' >B
<option value value='3' >C
<option value value='4' >D
Find what: (.*)(>)(.)
Replace with: \3
Replace All
A
B
C
D
It looks like you are willing to create a temporary Map
, so I'd do it like this:
Map tmp = new HashMap(patch);
tmp.keySet().removeAll(target.keySet());
target.putAll(tmp);
Here, patch
is the map that you are adding to the target
map.
Thanks to Louis Wasserman, here's a version that takes advantage of the new methods in Java 8:
patch.forEach(target::putIfAbsent);
You need just removing <TextBlock.Text>
and simply adding your content as following:
<Grid Margin="20">
<TextBlock TextWrapping="Wrap" TextAlignment="Justify" FontSize="17">
<Bold FontFamily="Segoe UI Light" FontSize="70">I.R. Iran</Bold><LineBreak/>
<Span FontSize="35">I</Span>ran or Persia, officially the <Italic>Islamic Republic of Iran</Italic>,
is a country in Western Asia. The country is bordered on the
north by Armenia, Azerbaijan and Turkmenistan, with Kazakhstan and Russia
to the north across the Caspian Sea.<LineBreak/>
<Span FontSize="10">For more information about Iran see <Hyperlink NavigateUri="http://en.WikiPedia.org/wiki/Iran">WikiPedia</Hyperlink></Span>
<LineBreak/>
<LineBreak/>
<Span FontSize="12">
<Span>Is this page helpful?</Span>
<Button Content="No"/>
<Button Content="Yes"/>
</Span>
</TextBlock>
</Grid>
I think this is what you are looking for -
select Address1+Address2 as CompleteAddress from YourTable
where Address1+Address2 like '%YourSearchString%'
To prevent a compound word being created when we append address1 with address2, you can use this -
select Address1 + ' ' + Address2 as CompleteAddress from YourTable
where Address1 + ' ' + Address2 like '%YourSearchString%'
So, '123 Center St' and 'Apt 3B' will not be '123 Center StApt 3B' but will be '123 Center St Apt 3B'.
If you want to run a script to a database:
mysql -u user -p data_base_name_here < db.sql
<form id="myform">
<input type="textbox" id="field"/>
<input type="button" value="submit">
</form>
<script>
$(function () {
$("#field").keyup(function (event) {
if (event.which === 13) {
document.myform.submit();
}
}
});
</script>
It can be caused by a classpath contamination. Check that you /WEB-INF/lib
doesn't contain something like jsp-api-*.jar
.
There's a really cool function called document.elementFromPoint
which does what it sounds like.
What we need is to find the x and y coords of the mouse and then call it using those values:
var x = event.clientX, y = event.clientY,
elementMouseIsOver = document.elementFromPoint(x, y);
In general, a procedure is a sequence of instructions.
A function can be the same, but it usually returns a result.
Or this:
Range("A2", Range("D" & Rows.Count).End(xlUp).Address).Sort Key1:=[b3], _
Order1:=xlAscending, Header:=xlYes
public static class SqlConnectionExtension
{
#region Public Methods
public static bool ExIsOpen(
this SqlConnection connection, MessageString errorMsg = null)
{
if (connection == null) { return false; }
if (connection.State == ConnectionState.Open) { return true; }
try
{
connection.Open();
return true;
}
catch (Exception ex) { errorMsg?.Append(ex.ToString()); }
return false;
}
public static bool ExIsReady(
this SqlConnection connction, MessageString errorMsg = null)
{
if (connction.ExIsOpen(errorMsg) == false) { return false; }
try
{
using (var command = new SqlCommand("select 1", connction))
{ return ((int)command.ExecuteScalar()) == 1; }
}
catch (Exception ex) { errorMsg?.Append(ex.ToString()); }
return false;
}
#endregion Public Methods
}
public class MessageString : IDisposable
{
#region Protected Fields
protected StringBuilder _messageBuilder = new StringBuilder();
#endregion Protected Fields
#region Public Constructors
public MessageString()
{
}
public MessageString(int capacity)
{
_messageBuilder.Capacity = capacity;
}
public MessageString(string value)
{
_messageBuilder.Append(value);
}
#endregion Public Constructors
#region Public Properties
public int Length {
get { return _messageBuilder.Length; }
set { _messageBuilder.Length = value; }
}
public int MaxCapacity {
get { return _messageBuilder.MaxCapacity; }
}
#endregion Public Properties
#region Public Methods
public static implicit operator string(MessageString ms)
{
return ms.ToString();
}
public static MessageString operator +(MessageString ms1, MessageString ms2)
{
MessageString ms = new MessageString(ms1.Length + ms2.Length);
ms.Append(ms1.ToString());
ms.Append(ms2.ToString());
return ms;
}
public MessageString Append<T>(T value) where T : IConvertible
{
_messageBuilder.Append(value);
return this;
}
public MessageString Append(string value)
{
return Append<string>(value);
}
public MessageString Append(MessageString ms)
{
return Append(ms.ToString());
}
public MessageString AppendFormat(string format, params object[] args)
{
_messageBuilder.AppendFormat(CultureInfo.InvariantCulture, format, args);
return this;
}
public MessageString AppendLine()
{
_messageBuilder.AppendLine();
return this;
}
public MessageString AppendLine(string value)
{
_messageBuilder.AppendLine(value);
return this;
}
public MessageString AppendLine(MessageString ms)
{
_messageBuilder.AppendLine(ms.ToString());
return this;
}
public MessageString AppendLine<T>(T value) where T : IConvertible
{
Append<T>(value);
AppendLine();
return this;
}
public MessageString Clear()
{
_messageBuilder.Clear();
return this;
}
public void Dispose()
{
_messageBuilder.Clear();
_messageBuilder = null;
}
public int EnsureCapacity(int capacity)
{
return _messageBuilder.EnsureCapacity(capacity);
}
public bool Equals(MessageString ms)
{
return Equals(ms.ToString());
}
public bool Equals(StringBuilder sb)
{
return _messageBuilder.Equals(sb);
}
public bool Equals(string value)
{
return Equals(new StringBuilder(value));
}
public MessageString Insert<T>(int index, T value)
{
_messageBuilder.Insert(index, value);
return this;
}
public MessageString Remove(int startIndex, int length)
{
_messageBuilder.Remove(startIndex, length);
return this;
}
public MessageString Replace(char oldChar, char newChar)
{
_messageBuilder.Replace(oldChar, newChar);
return this;
}
public MessageString Replace(string oldValue, string newValue)
{
_messageBuilder.Replace(oldValue, newValue);
return this;
}
public MessageString Replace(char oldChar, char newChar, int startIndex, int count)
{
_messageBuilder.Replace(oldChar, newChar, startIndex, count);
return this;
}
public MessageString Replace(string oldValue, string newValue, int startIndex, int count)
{
_messageBuilder.Replace(oldValue, newValue, startIndex, count);
return this;
}
public override string ToString()
{
return _messageBuilder.ToString();
}
public string ToString(int startIndex, int length)
{
return _messageBuilder.ToString(startIndex, length);
}
#endregion Public Methods
}
Executing seq(1, 10, 1)
does what 1:10
does. You can change the last parameter of seq
, i.e. by
, to be the step of whatever size you like.
> #a vector of even numbers
> seq(0, 10, by=2) # Explicitly specifying "by" only to increase readability
> [1] 0 2 4 6 8 10
Here is how one can do it via the global request
helper function.
{{ request()->segment(1) }}
Note: request()
returns the object of the Request
class.
In my case we added the @Profile annotation newly in order to ignore the TestApplication class in production mode and the Application class in test mode.
Unfortunately, we forgot to add the following line into the application.properties files:
spring.profiles.active=test
or
spring.profiles.active=production
Without these config no profile was loaded which caused the not-so-much saying Spring Error.
Yes. Using the JsonConvert class which contains helper methods for this precise purpose:
// To convert an XML node contained in string xml into a JSON string
XmlDocument doc = new XmlDocument();
doc.LoadXml(xml);
string jsonText = JsonConvert.SerializeXmlNode(doc);
// To convert JSON text contained in string json into an XML node
XmlDocument doc = JsonConvert.DeserializeXmlNode(json);
Documentation here: Converting between JSON and XML with Json.NET
Here it is:
[chr(i) for i in xrange(127)]
A good trick is to use inner box-shadow, and let it do all the fading for you rather than applying it to the image.
Add a class to the containing div, then set the following css on it:
.img-overlay {
position: relative;
max-width: 500px; //whatever your max-width should be
}
position: relative
is required on a parent element of children with position: absolute
for the children to be positioned in relation to that parent.
RewriteCond %{HTTP_HOST} ^!example.com$ [NC]
RewriteRule ^(.*)$ http://www.example.com/$1 [R=301,L]
This starts with the HTTP_HOST
variable, which contains just the domain name portion of the incoming URL (example.com
). Assuming the domain name does not contain a www.
and matches your domain name exactly, then the RewriteRule comes into play. The pattern ^(.*)$
will match everything in the REQUEST_URI
, which is the resource requested in the HTTP request (foo/blah/index.html
). It stores this in a back reference, which is then used to rewrite the URL with the new domain name (one that starts with www
).
[NC]
indicates case-insensitive pattern matching, [R=301]
indicates an external redirect using code 301 (resource moved permanently), and [L]
stops all further rewriting, and redirects immediately.
for sure the certutil is the best approach but there's a chance to hit windows xp/2003 machine without certutil command.There makecab command can be used which has its own hash algorithm - here the fileinf.bat which will output some info about the file including the checksum.
GROUP BY is used to group rows in a select, usually when aggregating rows (e.g. calculating totals, averages, etc. for a set of rows with the same values for some fields).
ORDER BY is used to order the rows resulted from a select statement.
Third match in google for "C++ slicing" gives me this Wikipedia article http://en.wikipedia.org/wiki/Object_slicing and this (heated, but the first few posts define the problem) : http://bytes.com/forum/thread163565.html
So it's when you assign an object of a subclass to the super class. The superclass knows nothing of the additional information in the subclass, and hasn't got room to store it, so the additional information gets "sliced off".
If those links don't give enough info for a "good answer" please edit your question to let us know what more you're looking for.
If you use angular cli, after adding bootstrap into package.json and install the package, all you need is add boostrap.min.css into .angular-cli.json's "styles" section.
One important thing is "When you make changes to .angular-cli.json you will need to re-start ng serve to pick up configuration changes."
Ref:
https://github.com/angular/angular-cli/wiki/stories-include-bootstrap
Try this
$window.location.href="#page-name";
$window.location.reload();
Ljava.lang.String;@
is returned where you used string arrays as strings. Employee.getSelectCancel()
does not seem to return a String[]
How about just doing the following:
_richTextBox.SelectAll();
string myText = _richTextBox.Selection.Text;
Long story short you need to create a launch file. So, from Terminal:
sudo vi /Library/LaunchDaemons/com.mysql.mysql.plist
(If you are not familiar with vi, then press i to start inserting text)
This should be the content of your file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true />
<key>Label</key>
<string>com.mysql.mysqld</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/mysql/bin/mysqld_safe</string>
<string>--user=mysql</string>
</array>
</dict>
</plist>
press esc then : wq!enter
Then you need to give the file the right permissions and set it to load on startup.
sudo chown root:wheel /Library/LaunchDaemons/com.mysql.mysql.plist
sudo chmod 644 /Library/LaunchDaemons/com.mysql.mysql.plist
sudo launchctl load -w /Library/LaunchDaemons/com.mysql.mysql.plist
And that is it.
Given a command like attrib
:
require 'open3'
a="attrib"
Open3.popen3(a) do |stdin, stdout, stderr|
puts stdout.read
end
I've found that while this method isn't as memorable as
system("thecommand")
or
`thecommand`
in backticks, a good thing about this method compared to other methods is
backticks don't seem to let me puts
the command I run/store the command I want to run in a variable, and system("thecommand")
doesn't seem to let me get the output whereas this method lets me do both of those things, and it lets me access stdin, stdout and stderr independently.
See "Executing commands in ruby" and Ruby's Open3 documentation.
Note: Using Android Support Library v22.1.0 and targeting API level 11 and up? Scroll down to the last update.
My application style is set to Theme.Holo which is dark and I would like the check boxes on my list view to be of style Theme.Holo.Light. I am not trying to create a custom style. The code below doesn't seem to work, nothing happens at all.
At first it may not be apparent why the system exhibits this behaviour, but when you actually look into the mechanics you can easily deduce it. Let me take you through it step by step.
First, let's take a look what the Widget.Holo.Light.CompoundButton.CheckBox
style defines. To make things more clear, I've also added the 'regular' (non-light) style definition.
<style name="Widget.Holo.Light.CompoundButton.CheckBox" parent="Widget.CompoundButton.CheckBox" />
<style name="Widget.Holo.CompoundButton.CheckBox" parent="Widget.CompoundButton.CheckBox" />
As you can see, both are empty declarations that simply wrap Widget.CompoundButton.CheckBox
in a different name. So let's look at that parent style.
<style name="Widget.CompoundButton.CheckBox">
<item name="android:background">@android:drawable/btn_check_label_background</item>
<item name="android:button">?android:attr/listChoiceIndicatorMultiple</item>
</style>
This style references both a background and button drawable. btn_check_label_background
is simply a 9-patch and hence not very interesting with respect to this matter. However, ?android:attr/listChoiceIndicatorMultiple
indicates that some attribute based on the current theme (this is important to realise) will determine the actual look of the CheckBox
.
As listChoiceIndicatorMultiple
is a theme attribute, you will find multiple declarations for it - one for each theme (or none if it gets inherited from a parent theme). This will look as follows (with other attributes omitted for clarity):
<style name="Theme">
<item name="listChoiceIndicatorMultiple">@android:drawable/btn_check</item>
...
</style>
<style name="Theme.Holo">
<item name="listChoiceIndicatorMultiple">@android:drawable/btn_check_holo_dark</item>
...
</style>
<style name="Theme.Holo.Light" parent="Theme.Light">
<item name="listChoiceIndicatorMultiple">@android:drawable/btn_check_holo_light</item>
...
</style>
So this where the real magic happens: based on the theme's listChoiceIndicatorMultiple
attribute, the actual appearance of the CheckBox
is determined. The phenomenon you're seeing is now easily explained: since the appearance is theme-based (and not style-based, because that is merely an empty definition) and you're inheriting from Theme.Holo
, you will always get the CheckBox
appearance matching the theme.
Now, if you want to change your CheckBox
's appearance to the Holo.Light version, you will need to take a copy of those resources, add them to your local assets and use a custom style to apply them.
As for your second question:
Also can you set styles to individual widgets if you set a style to the application?
Absolutely, and they will override any activity- or application-set styles.
Is there any way to set a theme(style with images) to the checkbox widget. (...) Is there anyway to use this selector: link?
Update:
Let me start with saying again that you're not supposed to rely on Android's internal resources. There's a reason you can't just access the internal namespace as you please.
However, a way to access system resources after all is by doing an id lookup by name. Consider the following code snippet:
int id = Resources.getSystem().getIdentifier("btn_check_holo_light", "drawable", "android");
((CheckBox) findViewById(R.id.checkbox)).setButtonDrawable(id);
The first line will actually return the resource id of the btn_check_holo_light
drawable resource. Since we established earlier that this is the button selector that determines the look of the CheckBox
, we can set it as 'button drawable' on the widget. The result is a CheckBox
with the appearance of the Holo.Light
version, no matter what theme/style you set on the application, activity or widget in xml. Since this sets only the button drawable, you will need to manually change other styling; e.g. with respect to the text appearance.
Below a screenshot showing the result. The top checkbox uses the method described above (I manually set the text colour to black in xml), while the second uses the default theme-based Holo
styling (non-light, that is).
Update2:
With the introduction of Support Library v22.1.0, things have just gotten a lot easier! A quote from the release notes (my emphasis):
Lollipop added the ability to overwrite the theme at a view by view level by using the
android:theme
XML attribute - incredibly useful for things such as dark action bars on light activities. Now, AppCompat allows you to useandroid:theme
for Toolbars (deprecating theapp:theme
used previously) and, even better, bringsandroid:theme
support to all views on API 11+ devices.
In other words: you can now apply a theme on a per-view basis, which makes solving the original problem a lot easier: just specify the theme you'd like to apply for the relevant view. I.e. in the context of the original question, compare the results of below:
<CheckBox
...
android:theme="@android:style/Theme.Holo" />
<CheckBox
...
android:theme="@android:style/Theme.Holo.Light" />
The first CheckBox
is styled as if used in a dark theme, the second as if in a light theme, regardless of the actual theme set to your activity or application.
Of course you should no longer be using the Holo theme, but instead use Material.
In case you are into functional this is a function written in Scala showing how you could copy an input stream to an output stream using only vals (and not vars).
def copyInputToOutputFunctional(inputStream: InputStream, outputStream: OutputStream,bufferSize: Int) {
val buffer = new Array[Byte](bufferSize);
def recurse() {
val len = inputStream.read(buffer);
if (len > 0) {
outputStream.write(buffer.take(len));
recurse();
}
}
recurse();
}
Note that this is not recommended to use in a java application with little memory available because with a recursive function you could easily get a stack overflow exception error
Use next, it will bypass that condition and rest of the code will work. Below i have provided the Full script and out put
class TestBreak
puts " Enter the nmber"
no= gets.to_i
for i in 1..no
if(i==5)
next
else
puts i
end
end
end
obj=TestBreak.new()
Output: Enter the nmber 10
1 2 3 4 6 7 8 9 10
If all you need is to ensure uniqueness of elements, then HashSet is what you need.
What do you mean when you say "just a set implementation"? A set is (by definition) a collection of unique elements that doesn't save element order.