Programs & Examples On #Bellman ford

For omnibus versions:\

sudo gitlab-rake gitlab:env:info

Example:

System information
System:     Ubuntu 12.04
Current User:   git
Using RVM:  no
Ruby Version:   2.1.7p400
Gem Version:    2.2.5
Bundler Version:1.10.6
Rake Version:   10.4.2
Sidekiq Version:3.3.0

GitLab information
Version:    8.2.2
Revision:   08fae2f
Directory:  /opt/gitlab/embedded/service/gitlab-rails
DB Adapter: postgresql
URL:        https://your.hostname
HTTP Clone URL: https://your.hostname/some-group/some-project.git
SSH Clone URL:  [email protected]:some-group/some-project.git
Using LDAP: yes
Using Omniauth: no

GitLab Shell
Version:    2.6.8
Repositories:   /var/opt/gitlab/git-data/repositories
Hooks:      /opt/gitlab/embedded/service/gitlab-shell/hooks/
Git:        /opt/gitlab/embedded/bin/git

You basically need to do this:

• include the target hash into the link pointing to the other page (href="other_page.html#section")
• in your ready handler clear the hard jump scroll normally dictated by the hash and as soon as possible scroll the page back to the top and call jump() - you'll need to do this asynchronously
• in jump() if no event is given, make location.hash the target
• also this technique might not catch the jump in time, so you'll better hide the html,body right away and show it back once you scrolled it back to zero

This is your code with the above added:

var jump=function(e)
{
   if (e){
       e.preventDefault();
       var target = $(this).attr("href");
   }else{
       var target = location.hash;
   }

   $('html,body').animate(
   {
       scrollTop: $(target).offset().top
   },2000,function()
   {
       location.hash = target;
   });

}

$('html, body').hide();

$(document).ready(function()
{
    $('a[href^=#]').bind("click", jump);

    if (location.hash){
        setTimeout(function(){
            $('html, body').scrollTop(0).show();
            jump();
        }, 0);
    }else{
        $('html, body').show();
    }
});

Verified working in Chrome/Safari, Firefox and Opera. I don't know about IE though.

Sometimes I use a prefixes for my keys. For example:

var pre = 'foo',
    key = pre + 1234

obj = {};

obj[key] = val;

Now you don't have any problem accessing them.

I tried my best to follow the answers given above. But I have below reason for the same.

Note: This is for maven+eclipse+tomcat deployment and issue faced especially with spring mvc.

1- If you are including servlet and jsp dependency please mark them provided in scope.

<dependency>
        <groupId>javax.servlet</groupId>
        <artifactId>javax.servlet-api</artifactId>
        <version>3.1.0</version>
        <scope>provided</scope>
    </dependency>
    <dependency>
        <groupId>javax.servlet.jsp</groupId>
        <artifactId>javax.servlet.jsp-api</artifactId>
        <version>2.3.1</version>
        <scope>provided</scope>
    </dependency>

2. Possibly you might be including jstl as dependency. So, jsp-api.jar and servlet-api.jar will be included along. So, require to exclude the servlet-api and jsp-api being deployed as required lib in target or in "WEB-INF/lib" as given below.

   <dependency>
       <groupId>javax.servlet.jsp.jstl</groupId>
       <artifactId>jstl-api</artifactId>
       <version>1.2</version>
       <exclusions>
           <exclusion>
               <artifactId>servlet-api</artifactId>
               <groupId>javax.servlet</groupId>
           </exclusion>
           <exclusion>
               <artifactId>jsp-api</artifactId>
               <groupId>javax.servlet.jsp</groupId>
           </exclusion>
       </exclusions>
   </dependency>
   

Can be done on the same line using date.replace:

from datetime import datetime

datetime.today().replace(day=1)

The jar file is missing. You can download the jar file and add it as external libraries in your project . You can download this from

http://www.findjar.com/jar/com/googlecode/json-simple/json-simple/1.1/json-simple-1.1.jar.html

Simplifying a bit, you can imagine map() doing something like this:

def mymap(func, lst):
    result = []
    for e in lst:
        result.append(func(e))
    return result

As you can see, it takes a function and a list, and returns a new list with the result of applying the function to each of the elements in the input list. I said "simplifying a bit" because in reality map() can process more than one iterable:

If additional iterable arguments are passed, function must take that many arguments and is applied to the items from all iterables in parallel. If one iterable is shorter than another it is assumed to be extended with None items.

For the second part in the question: What role does this play in making a Cartesian product? well, map() could be used for generating the cartesian product of a list like this:

lst = [1, 2, 3, 4, 5]

from operator import add
reduce(add, map(lambda i: map(lambda j: (i, j), lst), lst))

... But to tell the truth, using product() is a much simpler and natural way to solve the problem:

from itertools import product
list(product(lst, lst))

Either way, the result is the cartesian product of lst as defined above:

[(1, 1), (1, 2), (1, 3), (1, 4), (1, 5),
 (2, 1), (2, 2), (2, 3), (2, 4), (2, 5),
 (3, 1), (3, 2), (3, 3), (3, 4), (3, 5),
 (4, 1), (4, 2), (4, 3), (4, 4), (4, 5),
 (5, 1), (5, 2), (5, 3), (5, 4), (5, 5)]

You should use the android Location

You can do:

location1.distanceTo(location2);

And also:

float[] results = new float[1];
Location.distanceBetween(latLongA.latitude, latLongA.longitude,
                         latLongB.latitude, latLongB.longitude,
                         results);

And you will get the distance in meters between location1 and location2 in meters. And beetween latLongA ant latLongB.

Using location.

WebElement drop_down =driver.findElement(By.id("Category"));
Select se = new Select(drop_down);
for(int i=0 ;i<se.getOptions().size(); i++)
System.out.println(se.getOptions().get(i).getAttribute("value"));

You can create a single script that calls all the others.

Put the following into a batch file:

@echo off
echo.>"%~dp0all.sql"
for %%i in ("%~dp0"*.sql) do echo @"%%~fi" >> "%~dp0all.sql"

When you run that batch file it will create a new script named all.sql in the same directory where the batch file is located. It will look for all files with the extension .sql in the same directory where the batch file is located.

You can then run all scripts by using sqlplus user/pwd @all.sql (or extend the batch file to call sqlplus after creating the all.sql script)

If you want your anchor to still appear to be clickable:

$("a").removeAttr("href").css("cursor","pointer");

And if you wanted to remove the href from only anchors with certain attributes (eg ones that just have a hash mark as the href - this can be useful in asp.net)

$("a[href='#']").removeAttr("href").css("cursor","pointer");

A bearer token is like a currency note e.g 100$ bill . One can use the currency note without being asked any/many questions.

Bearer Token A security token with the property that any party in possession of the token (a "bearer") can use the token in any way that any other party in possession of it can. Using a bearer token does not require a bearer to prove possession of cryptographic key material (proof-of-possession).

You can use the overflow property

style="overflow: scroll ;max-height: 250px; width: 50%;"

Try sprintf() for javascript.

Or

// First, checks if it isn't implemented yet.
if (!String.prototype.format) {
  String.prototype.format = function() {
    var args = arguments;
    return this.replace(/{(\d+)}/g, function(match, number) { 
      return typeof args[number] != 'undefined'
        ? args[number]
        : match
      ;
    });
  };
}

"{0} is dead, but {1} is alive! {0} {2}".format("ASP", "ASP.NET")

Both answers pulled from JavaScript equivalent to printf/string.format

Sparky's answer is one standard way to solve this problem, but as I also wrote in my comment, you run the risk of overflows. This can be solved by using a wider type, but what if you want to divide long longs?

Nathan Ernst's answer provides one solution, but it involves a function call, a variable declaration and a conditional, which makes it no shorter than the OPs code and probably even slower, because it is harder to optimize.

My solution is this:

q = (x % y) ? x / y + 1 : x / y;

It will be slightly faster than the OPs code, because the modulo and the division is performed using the same instruction on the processor, because the compiler can see that they are equivalent. At least gcc 4.4.1 performs this optimization with -O2 flag on x86.

In theory the compiler might inline the function call in Nathan Ernst's code and emit the same thing, but gcc didn't do that when I tested it. This might be because it would tie the compiled code to a single version of the standard library.

As a final note, none of this matters on a modern machine, except if you are in an extremely tight loop and all your data is in registers or the L1-cache. Otherwise all of these solutions will be equally fast, except for possibly Nathan Ernst's, which might be significantly slower if the function has to be fetched from main memory.

Not with an iterator.

For org.json.JSONArray, you can do:

for (int i = 0; i < arr.length(); i++) {
  arr.getJSONObject(i);
}

For javax.json.JsonArray, you can do:

for (int i = 0; i < arr.size(); i++) {
  arr.getJsonObject(i);
}

Short answer: no. window.location.href is not capable of passing POST data.

Somewhat more satisfying answer: You can use this function to clone all your form data and submit it.

var submitMe = document.createElement("form");
submitMe.action = "YOUR_URL_HERE"; // Remember to change me
submitMe.method = "post";
submitMe.enctype = "multipart/form-data";
var nameJoiner = "_";
// ^ The string used to join form name and input name
//   so that you can differentiate between forms when
//   processing the data server-side.
submitMe.importFields = function(form){
    for(k in form.elements){
        if(input = form.elements[k]){
            if(input.type!="submit"&&
                     (input.nodeName=="INPUT"
                    ||input.nodeName=="TEXTAREA"
                    ||input.nodeName=="BUTTON"
                    ||input.nodeName=="SELECT")
                     ){
                var output = input.cloneNode(true);
                output.name = form.name + nameJoiner + input.name;
                this.appendChild(output);
            }
        }
    }
}

• Do submitMe.importFields(form_element); for each of the three forms you want to submit.
• This function will add each form's name to the names of its child inputs (If you have an <input name="email"> in <form name="login">, the submitted name will be login_name.
• You can change the nameJoiner variable to something other than _ so it doesn't conflict with your input naming scheme.
• Once you've imported all the necessary forms, do submitMe.submit();

iterating over Ihab's answer, just using position:fixed and bootstraps col-offset you don't need to be specific on the width.

<div class="row">
    <div class="col-lg-3" style="position:fixed">
        Fixed content
    </div>
    <div class="col-lg-9 col-lg-offset-3">
        Normal scrollable content
    </div>
</div>

What also works well is the SuppressWithNearbyCommentFilter which uses individual comments to suppress audit events.

For example

// CHECKSTYLE IGNORE check FOR NEXT 1 LINES
public void onClick(View view) { ... }

To configure a filter so that CHECKSTYLE IGNORE check FOR NEXT var LINES avoids triggering any audits for the given check for the current line and the next var lines (for a total of var+1 lines):

<module name="SuppressWithNearbyCommentFilter">
    <property name="commentFormat" value="CHECKSTYLE IGNORE (\w+) FOR NEXT (\d+) LINES"/>
    <property name="checkFormat" value="$1"/>
    <property name="influenceFormat" value="$2"/>
</module>

http://checkstyle.sourceforge.net/config.html

You can use stristr() or strpos(). Both return false if nothing is found.

Pretty much all that is necessary if you are asked to print even odd numbers in synchronized manner.

public class ThreadingOddEvenNumbers {

    void main(String[] args) throws InterruptedException {
        Printer printer = new Printer(57);
        Thread t1 = new Thread(new MyRunner(printer, true), "EvenPrinter");
        Thread t2 = new Thread(new MyRunner(printer, false), "OddPrinter");
        t1.start();
        t2.start();

        t1.join();
        t2.join();
    }

}

class MyRunner implements Runnable {
    private Printer p;
    private boolean evenProperty;

    public MyRunner(Printer p, boolean evenNess) {
        this.p = p;
        evenProperty = evenNess;
    }

    public void run() {
        try {
            print();
        } catch (InterruptedException ex) {
            System.out.println(this.getClass().getName() + " "
                    + ex.getMessage());
        }
    }


    public void print() throws InterruptedException {
        while (!p.isJobComplete()) {
            synchronized (p) {
                if (evenProperty)
                    while (p.isEvenPrinted()) {
                        System.out.println("wait by: "
                                + Thread.currentThread().getName());
                        p.wait();
                        if (p.isJobComplete())
                            break;
                    }
                else
                    while (!p.isEvenPrinted()) {
                        System.out.println("wait by: "
                                + Thread.currentThread().getName());
                        p.wait();
                        if (p.isJobComplete())
                            break;
                    }
            }

            synchronized (p) {
                if (evenProperty)
                    p.printEven(Thread.currentThread().getName());
                else
                    p.printOdd(Thread.currentThread().getName());
                p.notifyAll();
                System.out.println("notify called: by: "
                        + Thread.currentThread().getName());
            }
        }
    }
}

class Printer {
    private volatile boolean evenPrinted;
    private volatile boolean jobComplete;
    private int limit;
    private int counter;

    public Printer(int lim) {
        limit = lim;
        counter = 1;
        evenPrinted = true;
        jobComplete = false;
    }

    public void printEven(String threadName) {
        System.out.println(threadName + "," + counter);
        incrCounter();
        evenPrinted = true;
    }

    public void printOdd(String threadName) {
        System.out.println(threadName + "," + counter);
        incrCounter();
        evenPrinted = false;
    }

    private void incrCounter() {
        counter++;
        if (counter >= limit)
            jobComplete = true;
    }

    public int getLimit() {
        return limit;
    }

    public boolean isEvenPrinted() {
        return evenPrinted;
    }

    public boolean isJobComplete() {
        return jobComplete;
    }
}

$array = array('foo' => 'bar', 33 => 'bin', 'lorem' => 'ipsum');
$array = array_values($array);
echo $array[0]; //bar
echo $array[1]; //bin
echo $array[2]; //ipsum

You might be best starting with reading this post by Dan Abramov where he discusses various implementations of Flux and their trade-offs at the time he was writing redux: The Evolution of Flux Frameworks

Secondly that motivations page you link to does not really discuss the motivations of Redux so much as the motivations behind Flux (and React). The Three Principles is more Redux specific though still does not deal with the implementation differences from the standard Flux architecture.

Basically, Flux has multiple stores that compute state change in response to UI/API interactions with components and broadcast these changes as events that components can subscribe to. In Redux, there is only one store that every component subscribes to. IMO it feels at least like Redux further simplifies and unifies the flow of data by unifying (or reducing, as Redux would say) the flow of data back to the components - whereas Flux concentrates on unifying the other side of the data flow - view to model.

You need to use IFS instead of -d:

while IFS=, read -r col1 col2
do
    echo "I got:$col1|$col2"
done < myfile.csv

Note that for general purpose CSV parsing you should use a specialized tool which can handle quoted fields with internal commas, among other issues that Bash can't handle by itself. Examples of such tools are cvstool and csvkit.

Undefined offset means there's an empty array key for example:

$a = array('Felix','Jon','Java');

// This will result in an "Undefined offset" because the size of the array
// is three (3), thus, 0,1,2 without 3
echo $a[3];

You can solve the problem using a loop (while):

$i = 0;
while ($row = mysqli_fetch_assoc($result)) {
    // Increase count by 1, thus, $i=1
    $i++;

    $groupname[$i] = base64_decode(base64_decode($row['groupname']));

    // Set the first position of the array to null or empty
    $groupname[0] = "";
}

You probably want to assign the lastname you are reading out here

lastname = sheet.cell(row=r, column=3).value

to something; currently the program just forgets it

you could do that two lines after, like so

unpaidMembers[name] = lastname, email

your program will still crash at the same place, because .items() still won't give you 3-tuples but rather something that has this structure: (name, (lastname, email))

good news is, python can handle this

for name, (lastname, email) in unpaidMembers.items():

etc.

In addition to the answers above the command below will also work. I post it because it makes more sense to me. In each case it is 'using x-value-column: y-value-column'

plot 'ls.dat' using 1:2, 'ls.dat' using 1:3, 'ls.dat' using 1:4 

note that the command above assumes that you have a file named ls.dat with tab separated columns of data where column 1 is x, column 2 is y1, column 3 is y2 and column 4 is y3.

First, avoid all type comparisons. They're very, very rarely necessary. Sometimes, they help to check parameter types in a function -- even that's rare. Wrong type data will raise an exception, and that's all you'll ever need.

All of the basic conversion functions will map as equal to the type function.

type(9) is int
type(2.5) is float
type('x') is str
type(u'x') is unicode
type(2+3j) is complex

There are a few other cases.

isinstance( 'x', basestring )
isinstance( u'u', basestring )
isinstance( 9, int )
isinstance( 2.5, float )
isinstance( (2+3j), complex )

None, BTW, never needs any of this kind of type checking. None is the only instance of NoneType. The None object is a Singleton. Just check for None

variable is None

BTW, do not use the above in general. Use ordinary exceptions and Python's own natural polymorphism.

u can use this :

@Override
        public void afterTextChanged(Editable s) {
            super.afterTextChanged(s);
            if (s.length() == Bank.PAN_MINIMUM_RECOGNIZABLE_LENGTH + 10) {
                Bank bank = BankUtil.findByPan(s.toString());
                if (null != bank && mNewPanEntered && !mNameDefined) {
                    mNewPanEntered = false;
                    suggestCardName(bank);
                }

private void suggestCardName(Bank bank) {
    mLastSuggestTime = System.currentTimeMillis();
    if (!bank.getName().trim().matches(getActivity().getString(R.string.bank_eghtesadnovin))) {
        inputCardNumber.setError(R.string.balance_not_enmb, true);

    }
}

As neat solution, try-

$ open -a /Applications/Utilities/Terminal.app  *.py

or

$ open -b com.apple.terminal *.py

For the shell launched, you can go to Preferences > Shell > set it to exit if no error.

That's it.

Inspired by the other answers here, I created an SQL function to do a sequence migration. The function moves a primary key sequence to a new contiguous sequence starting with any value (>= 1) either inside or outside the existing sequence range.

I explain here how I used this function in a migration of two databases with the same schema but different values into one database.

First, the function (which prints the generated SQL commands so that it is clear what is actually happening):

CREATE OR REPLACE FUNCTION migrate_pkey_sequence
  ( arg_table      text
  , arg_column     text
  , arg_sequence   text
  , arg_next_value bigint  -- Must be >= 1
  )
RETURNS int AS $$
DECLARE
  result int;
  curr_value bigint = arg_next_value - 1;
  update_column1 text := format
    ( 'UPDATE %I SET %I = nextval(%L) + %s'
    , arg_table
    , arg_column
    , arg_sequence
    , curr_value
    );
  alter_sequence text := format
    ( 'ALTER SEQUENCE %I RESTART WITH %s'
    , arg_sequence
    , arg_next_value
    );
  update_column2 text := format
    ( 'UPDATE %I SET %I = DEFAULT'
    , arg_table
    , arg_column
    );
  select_max_column text := format
    ( 'SELECT coalesce(max(%I), %s) + 1 AS nextval FROM %I'
    , arg_column
    , curr_value
    , arg_table
    );
BEGIN
  -- Print the SQL command before executing it.
  RAISE INFO '%', update_column1;
  EXECUTE update_column1;
  RAISE INFO '%', alter_sequence;
  EXECUTE alter_sequence;
  RAISE INFO '%', update_column2;
  EXECUTE update_column2;
  EXECUTE select_max_column INTO result;
  RETURN result;
END $$ LANGUAGE plpgsql;

The function migrate_pkey_sequence takes the following arguments:

1. arg_table: table name (e.g. 'example')
2. arg_column: primary key column name (e.g. 'id')
3. arg_sequence: sequence name (e.g. 'example_id_seq')
4. arg_next_value: next value for the column after migration

It performs the following operations:

1. Move the primary key values to a free range. I assume that nextval('example_id_seq') follows max(id) and that the sequence starts with 1. This also handles the case where arg_next_value > max(id).
2. Move the primary key values to the contiguous range starting with arg_next_value. The order of key values are preserved but holes in the range are not preserved.
3. Print the next value that would follow in the sequence. This is useful if you want to migrate the columns of another table and merge with this one.

To demonstrate, we use a sequence and table defined as follows (e.g. using psql):

# CREATE SEQUENCE example_id_seq
  START WITH 1
  INCREMENT BY 1
  NO MINVALUE
  NO MAXVALUE
  CACHE 1;

# CREATE TABLE example
  ( id bigint NOT NULL DEFAULT nextval('example_id_seq'::regclass)
  );

Then, we insert some values (starting, for example, at 3):

# ALTER SEQUENCE example_id_seq RESTART WITH 3;
# INSERT INTO example VALUES (DEFAULT), (DEFAULT), (DEFAULT);
-- id: 3, 4, 5

Finally, we migrate the example.id values to start with 1.

# SELECT migrate_pkey_sequence('example', 'id', 'example_id_seq', 1);
INFO:  00000: UPDATE example SET id = nextval('example_id_seq') + 0
INFO:  00000: ALTER SEQUENCE example_id_seq RESTART WITH 1
INFO:  00000: UPDATE example SET id = DEFAULT
 migrate_pkey_sequence
-----------------------
                     4
(1 row)

The result:

# SELECT * FROM example;
 id
----
  1
  2
  3
(3 rows)

Try

let s= new Date().toLocaleString();_x000D_
_x000D_
console.log(s);

When i need to copy data from filtered table i use range.SpecialCells(xlCellTypeVisible).copy. Where the range is range of all data (without a filter).

Example:

Sub copy()
     'source worksheet
     dim ws as Worksheet
     set ws = Application.Worksheets("Data")' set you source worksheet here
     dim data_end_row_number as Integer
     data_end_row_number = ws.Range("B3").End(XlDown).Row.Number
    'enable filter
    ws.Range("B2:F2").AutoFilter Field:=2, Criteria1:="hockey", VisibleDropDown:=True
    ws.Range("B3:F" & data_end_row_number).SpecialCells(xlCellTypeVisible).Copy
    Application.Worksheets("Hoky").Range("B3").Paste
    'You have to add headers to Hoky worksheet
end sub

I've had a lot of issues with developers checking in their console.() statements. And, I really don't like debugging Internet Explorer, despite the fantastic improvements of Internet Explorer 10 and Visual Studio 2012, etc.

So, I've overridden the console object itself... I've added a __localhost flag that only allows console statements when on localhost. I also added console.() functions to Internet Explorer (that displays an alert() instead).

// Console extensions...
(function() {
    var __localhost = (document.location.host === "localhost"),
        __allow_examine = true;

    if (!console) {
        console = {};
    }

    console.__log = console.log;
    console.log = function() {
        if (__localhost) {
            if (typeof console !== "undefined" && typeof console.__log === "function") {
                console.__log(arguments);
            } else {
                var i, msg = "";
                for (i = 0; i < arguments.length; ++i) {
                    msg += arguments[i] + "\r\n";
                }
                alert(msg);
            }
        }
    };

    console.__info = console.info;
    console.info = function() {
        if (__localhost) {
            if (typeof console !== "undefined" && typeof console.__info === "function") {
                console.__info(arguments);
            } else {
                var i, msg = "";
                for (i = 0; i < arguments.length; ++i) {
                    msg += arguments[i] + "\r\n";
                }
                alert(msg);
            }
        }
    };

    console.__warn = console.warn;
    console.warn = function() {
        if (__localhost) {
            if (typeof console !== "undefined" && typeof console.__warn === "function") {
                console.__warn(arguments);
            } else {
                var i, msg = "";
                for (i = 0; i < arguments.length; ++i) {
                    msg += arguments[i] + "\r\n";
                }
                alert(msg);
            }
        }
    };

    console.__error = console.error;
    console.error = function() {
        if (__localhost) {
            if (typeof console !== "undefined" && typeof console.__error === "function") {
                console.__error(arguments);
            } else {
                var i, msg = "";
                for (i = 0; i < arguments.length; ++i) {
                    msg += arguments[i] + "\r\n";
                }
                alert(msg);
            }
        }
    };

    console.__group = console.group;
    console.group = function() {
        if (__localhost) {
            if (typeof console !== "undefined" && typeof console.__group === "function") {
                console.__group(arguments);
            } else {
                var i, msg = "";
                for (i = 0; i < arguments.length; ++i) {
                    msg += arguments[i] + "\r\n";
                }
                alert("group:\r\n" + msg + "{");
            }
        }
    };

    console.__groupEnd = console.groupEnd;
    console.groupEnd = function() {
        if (__localhost) {
            if (typeof console !== "undefined" && typeof console.__groupEnd === "function") {
                console.__groupEnd(arguments);
            } else {
                var i, msg = "";
                for (i = 0; i < arguments.length; ++i) {
                    msg += arguments[i] + "\r\n";
                }
                alert(msg + "\r\n}");
            }
        }
    };

    /// <summary>
    /// Clever way to leave hundreds of debug output messages in the code,
    /// but not see _everything_ when you only want to see _some_ of the
    /// debugging messages.
    /// </summary>
    /// <remarks>
    /// To enable __examine_() statements for sections/groups of code, type the
    /// following in your browser's console:
    ///       top.__examine_ABC = true;
    /// This will enable only the console.examine("ABC", ... ) statements
    /// in the code.
    /// </remarks>
    console.examine = function() {
        if (!__allow_examine) {
            return;
        }
        if (arguments.length > 0) {
            var obj = top["__examine_" + arguments[0]];
            if (obj && obj === true) {
                console.log(arguments.splice(0, 1));
            }
        }
    };
})();

Example use:

    console.log("hello");

Chrome/Firefox:

    prints hello in the console window.

Internet Explorer:

    displays an alert with 'hello'.

For those who look closely at the code, you'll discover the console.examine() function. I created this years ago so that I can leave debug code in certain areas around the product to help troubleshoot QA/customer issues. For instance, I would leave the following line in some released code:

    function doSomething(arg1) {
        // ...
        console.examine("someLabel", arg1);
        // ...
    }

And then from the released product, type the following into the console (or address bar prefixed with 'javascript:'):

    top.__examine_someLabel = true;

Then, I will see all of the logged console.examine() statements. It's been a fantastic help many times over.

You could actually do this in a single malloc by allocating for the Vector and the array at the same time. Eg:

struct Vector y = (struct Vector*)malloc(sizeof(struct Vector) + 10*sizeof(double));
y->x = (double*)((char*)y + sizeof(struct Vector));
y->n = 10;

This allocates Vector 'y', then makes y->x point to the extra allocated data immediate after the Vector struct (but in the same memory block).

If resizing the vector is required, you should do it with the two allocations as recommended. The internal y->x array would then be able to be resized while keeping the vector struct 'y' intact.

When there is a conflict during a merge, you have to finish the merge commit manually. It sounds like you've done the first two steps, to edit the files that conflicted and then run git add on them to mark them as resolved. Finally, you need to actually commit the merge with git commit. At that point you will be able to switch branches again.

Most answers here are strictly related to notations and syntax of the data models at different levels of abstraction. The key difference has not been mentioned by anyone. Conceptual models surface concepts. Concepts relate to other concepts in a different way that an Entity relates to another Entity at the Logical level of abstraction. Concepts are closer to Types. Usually at Conceptual level you display Types of things (this does not mean you must use the term "type" in your naming convention) and relationships between such types. Therefore, the existence of many-to-many relationships is not the rule but rather the consequence of the relationships between type-wise elements. In Logical Models Entities represent one instance of that thing in the real world. In Conceptual models it is not expected the description of an instance of an Entity and their relationships but rather the description of the "type" or "class" of that particular Entity. Examples: - Vehicles have Wheels and Wheels are used in Vehicles. At Conceptual level this is a many-to-many relationship - A particular Vehicle (a car by instance), with one specific registration number have 5 wheels and each particular wheel, each one with a serial number is related to only that particular car. At Logical level this is a one-to-many relationship.

Conceptual covers "types/classes". Logical covers "instances".

I would add another comment about databases. I agree with one of the colleagues who commented above that Conceptual and Logical models have absolutely nothing about databases. Conceptual and Logical models describe the real world from a data perspective using notations such as ER or UML. Database vendors, smartly, designed their products to follow the same philosophy used to logically model the World and them created Relational Databases, making everyone's lifes easier. You can describe your organisation's data landscape at all the levels using Conceptual and Logical model and never use a relational database.

Well I guess this is my 2 cents...

Also If you want you result set data in list .please use below LOC:

public List<String> dbselect(String query)
  {
      List<String> dbdata=new ArrayList<String>();
      try {
        dbResult=statement.executeQuery(query);
        ResultSetMetaData metadata=dbResult.getMetaData();
        for(int i=0;i>=metadata.getColumnCount();i++)
        {
            dbdata.add(dbResult.getString(i));
        }
        return dbdata;
    } catch (SQLException e) {
        return null;
    }
      
      
  }

It's always advised to never destructively destroy an existing classpath unless you have a good reason.

The following line preserves the existing classpath and adds onto it.

export CLASSPATH="$CLASSPATH:foo.jar:../bar.jar"

As mentioned here, this feature is not currently supported.

What is the other application you are trying to suppress the visibility of? Have you investigated other ways of achieving your desired effect? Please do so before subjecting your users to such rogue behaviour as you are describing: what you are trying to do sound rather like what certain naughty sites do with browser windows...

At least try to adhere to the rule of Least Surprise. Users expect to be able to determine the z-order of most applications themselves. You don't know what is most important to them, so if you change anything, you should focus on pushing the other application behind everything rather than promoting your own.

This is of course trickier, since Windows doesn't have a particularly sophisticated window manager. Two approaches suggest themselves:

1. enumerating top-level windows and checking which process they belong to, dropping their z-order if so. (I'm not sure if there are framework methods for these WinAPI functions.)
2. Fiddling with child process permissions to prevent it from accessing the desktop... but I wouldn't try this until the othe approach failed, as the child process might end up in a zombie state while requiring user interaction.

It looks like what you really want is:

function xmlEntities($string) {
    $translationTable = get_html_translation_table(HTML_ENTITIES, ENT_QUOTES);

    foreach ($translationTable as $char => $entity) {
        $from[] = $entity;
        $to[] = '&#'.ord($char).';';
    }
    return str_replace($from, $to, $string);
}

It replaces the named-entities with their number-equivalent.

Although it is not explicitly specified for setTimestamp(int parameterIndex, Timestamp x) drivers have to follow the rules established by the setTimestamp(int parameterIndex, Timestamp x, Calendar cal) javadoc:

Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIMESTAMP value, which the driver then sends to the database. With a Calendar object, the driver can calculate the timestamp taking into account a custom time zone. If no Calendar object is specified, the driver uses the default time zone, which is that of the virtual machine running the application.

When you call with setTimestamp(int parameterIndex, Timestamp x) the JDBC driver uses the time zone of the virtual machine to calculate the date and time of the timestamp in that time zone. This date and time is what is stored in the database, and if the database column does not store time zone information, then any information about the zone is lost (which means it is up to the application(s) using the database to use the same time zone consistently or come up with another scheme to discern timezone (ie store in a separate column).

For example: Your local time zone is GMT+2. You store "2012-12-25 10:00:00 UTC". The actual value stored in the database is "2012-12-25 12:00:00". You retrieve it again: you get it back again as "2012-12-25 10:00:00 UTC" (but only if you retrieve it using getTimestamp(..)), but when another application accesses the database in time zone GMT+0, it will retrieve the timestamp as "2012-12-25 12:00:00 UTC".

If you want to store it in a different timezone, then you need to use the setTimestamp(int parameterIndex, Timestamp x, Calendar cal) with a Calendar instance in the required timezone. Just make sure you also use the equivalent getter with the same time zone when retrieving values (if you use a TIMESTAMP without timezone information in your database).

So, assuming you want to store the actual GMT timezone, you need to use:

Calendar cal = Calendar.getInstance(TimeZone.getTimeZone("GMT"));
stmt.setTimestamp(11, tsSchedStartTime, cal);

With JDBC 4.2 a compliant driver should support java.time.LocalDateTime (and java.time.LocalTime) for TIMESTAMP (and TIME) through get/set/updateObject. The java.time.Local* classes are without time zones, so no conversion needs to be applied (although that might open a new set of problems if your code did assume a specific time zone).

By combining all the given answers, this method should work on all environments:

public static void clearConsole() {
    try {
        if (System.getProperty("os.name").contains("Windows")) {
            new ProcessBuilder("cmd", "/c", "cls").inheritIO().start().waitFor();
        }
        else {
            System.out.print("\033\143");
        }
    } catch (IOException | InterruptedException ex) {}
}

What C needed was a better preprocessor. cfront was one and thus born c++

I'ld use C, where the 'c++ as preprocessor' would not be okay.

I'm pretty sure, at the bottom of any well written c++ library/framework/toolkit, you would find dirty-old-c ( or static casts, which is same )

I wrote a small tool that does just that. Code is available on github.

To dump the results of one (or more) SQL queries to one (or more) CSV files:

java -jar sql_dumper.jar /path/sql/files/ /path/out/ user pass jdbcString

Cheers.

Here is some workaround to make numpys look more like Lists

np_arr = np.array([])
np_arr = np.append(np_arr , 2)
np_arr = np.append(np_arr , 24)
print(np_arr)

OUTPUT: array([ 2., 24.])

Boolean("true") will do the work too

I worked the same problem for showing multiple markers in Kotlin using a fragment

first declare a list of markers

private lateinit var markers: MutableList<Marker>

initialize this in the oncreate method of the frament

override fun onCreateView(
    inflater: LayoutInflater,
    container: ViewGroup?,
    savedInstanceState: Bundle?
                         ): View? {
    //initialize markers list

    markers = mutableListOf()
   
    return inflater.inflate(R.layout.fragment_driver_map, container, false)
}

on the OnMapReadyCallback add the markers to the markers list

private val callback = OnMapReadyCallback { googleMap ->

    map = googleMap

    markers.add(
        map.addMarker(
            MarkerOptions().position(riderLatLng)
                .title("Driver")
                .snippet("Driver")
                .icon(BitmapDescriptorFactory.defaultMarker(BitmapDescriptorFactory.HUE_RED))))


    markers.add(
        map.addMarker(
            MarkerOptions().position(driverLatLng)
                .title("Driver")
                .snippet("Driver")
                .icon(BitmapDescriptorFactory.defaultMarker(BitmapDescriptorFactory.HUE_GREEN))))

Still on the callback

//create builder
    val builder = LatLngBounds.builder()

    //loop through the markers list
    for (marker in markers) {

        builder.include(marker.position)
    }
    //create a bound
    val bounds = builder.build()

    //set a 200 pixels padding from the edge of the screen
    val cu = CameraUpdateFactory.newLatLngBounds(bounds,200)
    
    //move and animate the camera
    map.moveCamera(cu)
    //animate camera by providing zoom and duration args, callBack set to null
    map.animateCamera(CameraUpdateFactory.zoomTo(10f), 2000, null)

Merry coding guys

If you look at the output you receive from print() and also in your Traceback, you'll see the value you get back is not a string, it's a bytes object (prefixed by b):

b'{\n  "note":"This file    .....

If you fetch the URL using a tool such as curl -v, you will see that the content type is

Content-Type: application/json; charset=utf-8

So it's JSON, encoded as UTF-8, and Python is considering it a byte stream, not a simple string. In order to parse this, you need to convert it into a string first.

Change the last line of code to this:

info = json.loads(js.decode("utf-8"))

In my case the problem was that the class was located in test package. Moving it to main package has solved the problem.

The #ifdef directive is used to check if a preprocessor symbol is defined. The standard (C11 6.4.2 Identifiers) mandates that identifiers must not start with a digit:

identifier:
    identifier-nondigit
    identifier identifier-nondigit
    identifier digit
identifier-nondigit:
    nondigit
    universal-character-name
    other implementation-defined characters>
nondigit: one of
    _ a b c d e f g h i j k l m
    n o p q r s t u v w x y z
    A B C D E F G H I J K L M
    N O P Q R S T U V W X Y Z
digit: one of
    0 1 2 3 4 5 6 7 8 9

The correct form for using the pre-processor to block out code is:

#if 0
: : :
#endif

You can also use:

#ifdef NO_CHANCE_THAT_THIS_SYMBOL_WILL_EVER_EXIST
: : :
#endif

but you need to be confident that the symbols will not be inadvertently set by code other than your own. In other words, don't use something like NOTUSED or DONOTCOMPILE which others may also use. To be safe, the #if option should be preferred.

What about something like this?

var arr = [];

$('[id^=event]', response).each(function(){
    arr.push($(this).html());
});

The [attr^=selector] selector matches elements on which the attr attribute starts with the given string, that way you don't care about the numbers after "event".

There is big difference between dot (".") and text() :-

• The dot (".") in XPath is called the "context item expression" because it refers to the context item. This could be match with a node (such as an element, attribute, or text node) or an atomic value (such as a string, number, or boolean). While text() refers to match only element text which is in string form.

• The dot (".") notation is the current node in the DOM. This is going to be an object of type Node while Using the XPath function text() to get the text for an element only gets the text up to the first inner element. If the text you are looking for is after the inner element you must use the current node to search for the string and not the XPath text() function.

For an example :-

<a href="something.html">
  <img src="filename.gif">
  link
</a>

Here if you want to find anchor a element by using text link, you need to use dot ("."). Because if you use //a[contains(.,'link')] it finds the anchor a element but if you use //a[contains(text(),'link')] the text() function does not seem to find it.

Hope it will help you..:)

I found it very useful to build also a json message with repeated code, like this:

@POST
@Consumes("application/json")
@Produces("application/json")
public Response authUser(JsonObject authData) {
    String email = authData.getString("email");
    String password = authData.getString("password");
    JSONObject json = new JSONObject();
    if (email.equalsIgnoreCase(user.getEmail()) && password.equalsIgnoreCase(user.getPassword())) {
        json.put("status", "success");
        json.put("code", Response.Status.OK.getStatusCode());
        json.put("message", "User " + authData.getString("email") + " authenticated.");
        return Response.ok(json.toString()).build();
    } else {
        json.put("status", "error");
        json.put("code", Response.Status.NOT_FOUND.getStatusCode());
        json.put("message", "User " + authData.getString("email") + " not found.");
        return Response.status(Response.Status.NOT_FOUND).entity(json.toString()).build();
    }
}

Parsing text with delimiters from different email platforms posed a larger-sized version of this problem. They generally have a START and a STOP. Delimiter characters for wildcards kept choking regex. The problem with split is mentioned here & elsewhere - oops, delimiter character gone. It occurred to me to use replace() to give split() something else to consume. Chunk of code:

nuke = '~~~'
start = '|*'
stop = '*|'
julien = (textIn.replace(start,nuke + start).replace(stop,stop + nuke).split(nuke))
keep = [chunk for chunk in julien if start in chunk and stop in chunk]
logging.info('keep: %s',keep)

Here is a more easy solution. just remove the "navbar-nav" class and add "nav-justified".

I am doing the below for page redirection(from login to home page). I have to pass the user object also to the home page. so, i am using windows localstorage.

    $http({
        url:'/login/user',
        method : 'POST',
        headers: {
            'Content-Type': 'application/json'
          },
        data: userData
    }).success(function(loginDetails){
        $scope.updLoginDetails = loginDetails;
        if($scope.updLoginDetails.successful == true)
            {
                loginDetails.custId = $scope.updLoginDetails.customerDetails.cust_ID;
                loginDetails.userName = $scope.updLoginDetails.customerDetails.cust_NM;
                window.localStorage.setItem("loginDetails", JSON.stringify(loginDetails));
                $window.location='/login/homepage';
            }
        else
        alert('No access available.');

    }).error(function(err,status){
        alert('No access available.');      
    });

And it worked for me.

If you were looking for a quick one-liner, as of Java 5 you can do this:

myList.toString().replaceAll("\\[|\\]", "").replaceAll(", ","\t")

Additionally, if your purpose is just to print out the contents and are less concerned about the "\t", you can simply do this:

myList.toString()

which returns a string like

[str1, str2, str3]

If you have an Array (not ArrayList) then you can accomplish the same like this:

 Arrays.toString(myList).replaceAll("\\[|\\]", "").replaceAll(", ","\t")

Experts will tell you: "When I see the UI, I will know whether to use an Activity or a Fragment". In the beginning this will not have any sense, but in time, you will actually be able to tell if you need Fragment or not.

There is a good practice I found very helpful for me. It occurred to me while I was trying to explain something to my daughter.

Namely, imagine a box which represents a screen. Can you load another screen in this box? If you use a new box, will you have to copy multiple items from the 1st box? If the answer is Yes, then you should use Fragments, because the root Activity can hold all duplicated elements to save you time in creating them, and you can simply replace parts of the box.

But don't forget that you always need a box container (Activity) or your parts will be dispersed. So one box with parts inside.

Take care not to misuse the box. Android UX experts advise (you can find them on YouTube) when we should explicitly load another Activity, instead to use a Fragment (like when we deal with the Navigation Drawer which has categories). Once you feel comfortable with Fragments, you can watch all their videos. Even more they are mandatory material.

Can you right now look at your UI and figure out if you need an Activity or a Fragment? Did you get a new perspective? I think you did.

the diff method returns the difference in milliseconds. Instantiating moment(diff) isn't meaningful.

You can define a variable :

var dayInMilliseconds = 1000 * 60 * 60 * 24;

and then use it like so :

diff / dayInMilliseconds // --> 15

Edit

actually, this is built into the diff method, dubes' answer is better

Sweet and Simple!
moment('2020-12-04T09:52:03.915Z').format('lll');

Dec 4, 2020 4:58 PM

OtherFormats

moment.locale();         // en
moment().format('LT');   // 4:59 PM
moment().format('LTS');  // 4:59:47 PM
moment().format('L');    // 12/08/2020
moment().format('l');    // 12/8/2020
moment().format('LL');   // December 8, 2020
moment().format('ll');   // Dec 8, 2020
moment().format('LLL');  // December 8, 2020 4:59 PM
moment().format('lll');  // Dec 8, 2020 4:59 PM
moment().format('LLLL'); // Tuesday, December 8, 2020 4:59 PM
moment().format('llll'); // Tue, Dec 8, 2020 4:59 PM

Quoting the iPhone OS Technology Overview:

iPhone OS provides support for full-screen video playback through the Media Player framework (MediaPlayer.framework). This framework supports the playback of movie files with the .mov, .mp4, .m4v, and .3gp filename extensions and using the following compression standards:

• H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
• H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per second, Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
• MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
• Numerous audio formats, including the ones listed in “Audio Technologies”

For information about the classes of the Media Player framework, see Media Player Framework Reference.

Based on the accepted answer, here is a way to count all files in a directory RECURSIVELY:

iterator_count(
    new \RecursiveIteratorIterator(
        new \RecursiveDirectoryIterator('/your/directory/here/', \FilesystemIterator::SKIP_DOTS)
    )
)

I find this useful:

function Get-Version($filePath)
{
   $name = @{Name="Name";Expression= {split-path -leaf $_.FileName}}
   $path = @{Name="Path";Expression= {split-path $_.FileName}}
   dir -recurse -path $filePath | % { if ($_.Name -match "(.*dll|.*exe)$") {$_.VersionInfo}} | select FileVersion, $name, $path
}

import random
rgb_full="(" + str(random.randint(1,256))  + "," + str(random.randint(1,256))  + "," + str(random.randint(1,256))  + ")"

I followed this tutorial: How to install Maven on Windows

But running mvn -version, I still got:

mvn: command not found

So, I closed the current git window, and opened a new one. Everything went okay :)

Two possibilities here. Java Version incompatible or import

The 'yes' command will echo 'y' (or whatever you ask it to) indefinitely. Use it as:

yes | command-that-asks-for-input

or, if a capital 'Y' is required:

yes Y | command-that-asks-for-input

What this means is that you are trying to print out/output a value which is at least partially uninitialized. Can you narrow it down so that you know exactly what value that is? After that, trace through your code to see where it is being initialized. Chances are, you will see that it is not being fully initialized.

If you need more help, posting the relevant sections of source code might allow someone to offer more guidance.

EDIT

I see you've found the problem. Note that valgrind watches for Conditional jump or move based on unitialized variables. What that means is that it will only give out a warning if the execution of the program is altered due to the uninitialized value (ie. the program takes a different branch in an if statement, for example). Since the actual arithmetic did not involve a conditional jump or move, valgrind did not warn you of that. Instead, it propagated the "uninitialized" status to the result of the statement that used it.

It may seem counterintuitive that it does not warn you immediately, but as mark4o pointed out, it does this because uninitialized values get used in C all the time (examples: padding in structures, the realloc() call, etc.) so those warnings would not be very useful due to the false positive frequency.

You could better use the localStorage of the web browser.

You can find a reference here

well i actually have a very similar problem, but with a twist... say the top level site is a.foo.com - now i set document domain to a.foo.com

then in the iframe that i create / own,i also set it too a.foo.com

note that i cant set them too foo.com b/c there is another iframe in the page pointed to b.a.foo.com (which again uses a.foo.com but i cant change the script code there)

youll note that im essentially setting document.domain to what it already would be anyway...but i have to do that to access the other iframe i mentioned from b.a.foo.com

inside my frame, after i set the domain, eventhough all iframes have the same setting, i still get an error when reaching up into the parent in IE 6/7

there are other things that r really bizaree

in the outside / top level, if i wait for its onload event, and set a timer, eventually i can reach down into the frame i need to access....but i can never reach from bottom up... and i really need to be able to

also if i set everything to be foo.com (which as i said i cannot do) IT WORKS! but for some reason, when using the same value as location.host....it doesnt and its freaking killing me.....

You can use :

for( int i = 0 ; i < listField.size(); i++ ) {
    i < listField.size() - 1 ? request.append("?,") : request.append("?");
}

Then :

int i = 1;
for (String field : listField) {
    statement.setString(i++, field);
}

Exemple :

List<String> listField = new ArrayList<String>();
listField.add("test1");
listField.add("test2");
listField.add("test3");

StringBuilder request = new StringBuilder("SELECT * FROM TABLE WHERE FIELD IN (");

for( int i = 0 ; i < listField.size(); i++ ) {
    request = i < (listField.size() - 1) ? request.append("?,") : request.append("?");
}


DNAPreparedStatement statement = DNAPreparedStatement.newInstance(connection, request.toString);

int i = 1;
for (String field : listField) {
    statement.setString(i++, field);
}

ResultSet rs = statement.executeQuery();

The solution, as others have said, is to use multiple processes. Which framework is more appropriate, however, depends on many factors. In addition to the ones already mentioned, there is also charm4py and mpi4py (I am the developer of charm4py).

There is a more efficient way to implement the above example than using the worker pool abstraction. The main loop sends the same parameters (including the complete graph G) over and over to workers in each of the 1000 iterations. Since at least one worker will reside on a different process, this involves copying and sending the arguments to the other process(es). This could be very costly depending on the size of the objects. Instead, it makes sense to have workers store state and simply send the updated information.

For example, in charm4py this can be done like this:

class Worker(Chare):

    def __init__(self, Q, G, n):
        self.G = G
        ...

    def setinner(self, node1, node2):
        self.updateGraph(node1, node2)
        ...


def solve(Q, G, n):
    # create 2 workers, each on a different process, passing the initial state
    worker_a = Chare(Worker, onPE=0, args=[Q, G, n])
    worker_b = Chare(Worker, onPE=1, args=[Q, G, n])
    while i < 1000:
        result_a = worker_a.setinner(node1, node2, ret=True)  # execute setinner on worker A
        result_b = worker_b.setouter(node1, node2, ret=True)  # execute setouter on worker B

        inneropt, partition, x = result_a.get()  # wait for result from worker A
        outeropt = result_b.get()  # wait for result from worker B
        ...

Note that for this example we really only need one worker. The main loop could execute one of the functions, and have the worker execute the other. But my code helps to illustrate a couple of things:

1. Worker A runs in process 0 (same as the main loop). While result_a.get() is blocked waiting on the result, worker A does the computation in the same process.
2. Arguments are automatically passed by reference to worker A, since it is in the same process (there is no copying involved).

Within your component, you can define an array of number (ES6) as described below:

export class SampleComponent {
  constructor() {
    this.numbers = Array(5).fill(0).map((x,i)=>i);
  }
}

See this link for the array creation: Tersest way to create an array of integers from 1..20 in JavaScript.

You can then iterate over this array with ngFor:

@View({
  template: `
    <ul>
      <li *ngFor="let number of numbers">{{number}}</li>
    </ul>
  `
})
export class SampleComponent {
  (...)
}

Or shortly:

@View({
  template: `
    <ul>
      <li *ngFor="let number of [0,1,2,3,4]">{{number}}</li>
    </ul>
  `
})
export class SampleComponent {
  (...)
}

Hope it helps you, Thierry

Edit: Fixed the fill statement and template syntax.

header files contain prototypes for functions you define in a .c or .cpp/.cxx file (depending if you're using c or c++). You want to place #ifndef/#defines around your .h code so that if you include the same .h twice in different parts of your programs, the prototypes are only included once.

client.h

#ifndef CLIENT_H
#define CLIENT_H

short socketConnect(char *host,unsigned short port,char *sendbuf,char *recievebuf, long rbufsize);


#endif /** CLIENT_H */

Then you'd implement the .h in a .c file like so:

client.c

#include "client.h"

short socketConnect(char *host,unsigned short port,char *sendbuf,char *recievebuf, long rbufsize) {
 short ret = -1;
 //some implementation here
 return ret;
}

You can check whether the connection was lost or not by using this function:-

var socket = io( /**connection**/ );
socket.on('disconnect', function(){
//Your Code Here
});

Hope it will help you.

You should set body and html to position:fixed;, and then set right:, left:, top:, and bottom: to 0;. That way, even if content overflows it will not extend past the limits of the viewport.

For example:

<html>
<body>
    <div id="wrapper"></div>
</body>
</html>

CSS:

html, body, {
    position:fixed;
    top:0;
    bottom:0;
    left:0;
    right:0;
}

JS Fiddle Example

Caveat: Using this method, if the user makes their window smaller, content will be cut off.

I found the solution to my problem. In my ~/.bashrc:

export PATH=${PATH}:/path/to/android-sdk/tools

However adb is not located in the android-sdk/tools/, rather in android-sdk/platform-tools/. So I added the following

export PATH=${PATH}:/path/to/android-sdk/tools:/path/to/android-sdk/platform-tools

And that solved the problem for me.

You can do it, but it's not pretty:

#include <iostream>

class A {
    int mvalue;
public:
    A(int value) : mvalue(value) {}
    int value() { return mvalue; }
};

class B {
    // TODO: hack that respects alignment of A.. maybe C++14's alignof?
    char _hack[sizeof(A[3])];
    A* marr;
public:
    B() : marr(reinterpret_cast<A*>(_hack)) {
        new (&marr[0]) A(5);
        new (&marr[1]) A(6);
        new (&marr[2]) A(7);
    }

    A* arr() { return marr; }
};

int main(int argc, char** argv) {
    B b;
    A* arr = b.arr();
    std::cout << arr[0].value() << " " << arr[1].value() << " " << arr[2].value() << "\n";
    return 0;
}

If you put this in your code, I hope you have a VERY good reason.

This article http://technet.microsoft.com/en-us/library/ee198810.aspx led me to the solution. The only change is the placement of the exclamation mark.

(!manager=*)

It seems to be working just as wanted.

Edit as of 30.12.2015 - The Ultimate Guide to image downloading

last major update: Mar 31 2016

TL;DR a.k.a. stop talking, just give me the code!!

Skip to the bottom of this post, copy the BasicImageDownloader (javadoc version here) into your project, implement the OnImageLoaderListener interface and you're done.

Note: though the BasicImageDownloader handles possible errors and will prevent your app from crashing in case anything goes wrong, it will not perform any post-processing (e.g. downsizing) on the downloaded Bitmaps.

Since this post has received quite a lot of attention, I have decided to completely rework it to prevent the folks from using deprecated technologies, bad programming practices or just doing silly things - like looking for "hacks" to run network on the main thread or accept all SSL certs.

I've created a demo project named "Image Downloader" that demonstrates how to download (and save) an image using my own downloader implementation, the Android's built-in DownloadManager as well as some popular open-source libraries. You can view the complete source code or download the project on GitHub.

Note: I have not adjusted the permission management for SDK 23+ (Marshmallow) yet, thus the project is targeting SDK 22 (Lollipop).

In my conclusion at the end of this post I will share my humble opinion about the proper use-case for each particular way of image downloading I've mentioned.

Let's start with an own implementation (you can find the code at the end of the post). First of all, this is a BasicImageDownloader and that's it. All it does is connecting to the given url, reading the data and trying to decode it as a Bitmap, triggering the OnImageLoaderListener interface callbacks when appropriate. The advantage of this approach - it is simple and you have a clear overview of what's going on. A good way to go if all you need is downloading/displaying and saving some images, whilst you don't care about maintaining a memory/disk cache.

Note: in case of large images, you might need to scale them down.

--

Android DownloadManager is a way to let the system handle the download for you. It's actually capable of downloading any kind of files, not just images. You may let your download happen silently and invisible to the user, or you can enable the user to see the download in the notification area. You can also register a BroadcastReceiver to get notified after you download is complete. The setup is pretty much straightforward, refer to the linked project for sample code.

Using the DownloadManager is generally not a good idea if you also want to display the image, since you'd need to read and decode the saved file instead of just setting the downloaded Bitmap into an ImageView. The DownloadManager also does not provide any API for you app to track the download progress.

--

Now the introduction of the great stuff - the libraries. They can do much more than just downloading and displaying images, including: creating and managing the memory/disk cache, resizing images, transforming them and more.

I will start with Volley, a powerful library created by Google and covered by the official documentation. While being a general-purpose networking library not specializing on images, Volley features quite a powerful API for managing images.

You will need to implement a Singleton class for managing Volley requests and you are good to go.

You might want to replace your ImageView with Volley's NetworkImageView, so the download basically becomes a one-liner:

((NetworkImageView) findViewById(R.id.myNIV)).setImageUrl(url, MySingleton.getInstance(this).getImageLoader());

If you need more control, this is what it looks like to create an ImageRequest with Volley:

     ImageRequest imgRequest = new ImageRequest(url, new Response.Listener<Bitmap>() {
             @Override
             public void onResponse(Bitmap response) {
                    //do stuff
                }
            }, 0, 0, ImageView.ScaleType.CENTER_CROP, Bitmap.Config.ARGB_8888, 
             new Response.ErrorListener() {
             @Override
             public void onErrorResponse(VolleyError error) {
                   //do stuff
                }
            });

It is worth mentioning that Volley features an excellent error handling mechanism by providing the VolleyError class that helps you to determine the exact cause of an error. If your app does a lot of networking and managing images isn't its main purpose, then Volley it a perfect fit for you.

--

Square's Picasso is a well-known library which will do all of the image loading stuff for you. Just displaying an image using Picasso is as simple as:

 Picasso.with(myContext)
       .load(url)
       .into(myImageView); 

By default, Picasso manages the disk/memory cache so you don't need to worry about that. For more control you can implement the Target interface and use it to load your image into - this will provide callbacks similar to the Volley example. Check the demo project for examples.

Picasso also lets you apply transformations to the downloaded image and there are even other libraries around that extend those API. Also works very well in a RecyclerView/ListView/GridView.

--

Universal Image Loader is an another very popular library serving the purpose of image management. It uses its own ImageLoader that (once initialized) has a global instance which can be used to download images in a single line of code:

  ImageLoader.getInstance().displayImage(url, myImageView);

If you want to track the download progress or access the downloaded Bitmap:

 ImageLoader.getInstance().displayImage(url, myImageView, opts, 
 new ImageLoadingListener() {
     @Override
     public void onLoadingStarted(String imageUri, View view) {
                     //do stuff
                }

      @Override
      public void onLoadingFailed(String imageUri, View view, FailReason failReason) {
                   //do stuff
                }

      @Override
      public void onLoadingComplete(String imageUri, View view, Bitmap loadedImage) {
                   //do stuff
                }

      @Override
      public void onLoadingCancelled(String imageUri, View view) {
                   //do stuff
                }
            }, new ImageLoadingProgressListener() {
      @Override
      public void onProgressUpdate(String imageUri, View view, int current, int total) {
                   //do stuff
                }
            });

The opts argument in this example is a DisplayImageOptions object. Refer to the demo project to learn more.

Similar to Volley, UIL provides the FailReason class that enables you to check what went wrong on download failure. By default, UIL maintains a memory/disk cache if you don't explicitly tell it not to do so.

Note: the author has mentioned that he is no longer maintaining the project as of Nov 27th, 2015. But since there are many contributors, we can hope that the Universal Image Loader will live on.

--

Facebook's Fresco is the newest and (IMO) the most advanced library that takes image management to a new level: from keeping Bitmaps off the java heap (prior to Lollipop) to supporting animated formats and progressive JPEG streaming.

To learn more about ideas and techniques behind Fresco, refer to this post.

The basic usage is quite simple. Note that you'll need to call Fresco.initialize(Context); only once, preferable in the Application class. Initializing Fresco more than once may lead to unpredictable behavior and OOM errors.

Fresco uses Drawees to display images, you can think of them as of ImageViews:

    <com.facebook.drawee.view.SimpleDraweeView
    android:id="@+id/drawee"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    fresco:fadeDuration="500"
    fresco:actualImageScaleType="centerCrop"
    fresco:placeholderImage="@drawable/placeholder_grey"
    fresco:failureImage="@drawable/error_orange"
    fresco:placeholderImageScaleType="fitCenter"
    fresco:failureImageScaleType="centerInside"
    fresco:retryImageScaleType="centerCrop"
    fresco:progressBarImageScaleType="centerInside"
    fresco:progressBarAutoRotateInterval="1000"
    fresco:roundAsCircle="false" />

As you can see, a lot of stuff (including transformation options) gets already defined in XML, so all you need to do to display an image is a one-liner:

 mDrawee.setImageURI(Uri.parse(url));

Fresco provides an extended customization API, which, under circumstances, can be quite complex and requires the user to read the docs carefully (yes, sometimes you need to RTFM).

I have included examples for progressive JPEG's and animated images into the sample project.

Conclusion - "I have learned about the great stuff, what should I use now?"

Note that the following text reflects my personal opinion and should not be taken as a postulate.

• If you only need to download/save/display some images, don't plan to use them in a Recycler-/Grid-/ListView and don't need a whole bunch of images to be display-ready, the BasicImageDownloader should fit your needs.
• If your app saves images (or other files) as a result of a user or an automated action and you don't need the images to be displayed often, use the Android DownloadManager.
• In case your app does a lot of networking, transmits/receives JSON data, works with images, but those are not the main purpose of the app, go with Volley.
• Your app is image/media-focused, you'd like to apply some transformations to images and don't want to bother with complex API: use Picasso (Note: does not provide any API to track the intermediate download status) or Universal Image Loader
• If your app is all about images, you need advanced features like displaying animated formats and you are ready to read the docs, go with Fresco.

In case you missed that, the Github link for the demo project.

And here's the BasicImageDownloader.java

import android.graphics.Bitmap;
import android.graphics.BitmapFactory;
import android.os.AsyncTask;
import android.support.annotation.NonNull;
import android.util.Log;
import java.io.BufferedInputStream;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import java.util.HashSet;
import java.util.Set;

public class BasicImageDownloader {

    private OnImageLoaderListener mImageLoaderListener;
    private Set<String> mUrlsInProgress = new HashSet<>();
    private final String TAG = this.getClass().getSimpleName();

    public BasicImageDownloader(@NonNull OnImageLoaderListener listener) {
        this.mImageLoaderListener = listener;
    }

    public interface OnImageLoaderListener {
        void onError(ImageError error);      
        void onProgressChange(int percent);
        void onComplete(Bitmap result);
    }


    public void download(@NonNull final String imageUrl, final boolean displayProgress) {
        if (mUrlsInProgress.contains(imageUrl)) {
            Log.w(TAG, "a download for this url is already running, " +
                    "no further download will be started");
            return;
        }

        new AsyncTask<Void, Integer, Bitmap>() {

            private ImageError error;

            @Override
            protected void onPreExecute() {
                mUrlsInProgress.add(imageUrl);
                Log.d(TAG, "starting download");
            }

            @Override
            protected void onCancelled() {
                mUrlsInProgress.remove(imageUrl);
                mImageLoaderListener.onError(error);
            }

            @Override
            protected void onProgressUpdate(Integer... values) {
                mImageLoaderListener.onProgressChange(values[0]);
            }

        @Override
        protected Bitmap doInBackground(Void... params) {
            Bitmap bitmap = null;
            HttpURLConnection connection = null;
            InputStream is = null;
            ByteArrayOutputStream out = null;
            try {
                connection = (HttpURLConnection) new URL(imageUrl).openConnection();
                if (displayProgress) {
                    connection.connect();
                    final int length = connection.getContentLength();
                    if (length <= 0) {
                        error = new ImageError("Invalid content length. The URL is probably not pointing to a file")
                                .setErrorCode(ImageError.ERROR_INVALID_FILE);
                        this.cancel(true);
                    }
                    is = new BufferedInputStream(connection.getInputStream(), 8192);
                    out = new ByteArrayOutputStream();
                    byte bytes[] = new byte[8192];
                    int count;
                    long read = 0;
                    while ((count = is.read(bytes)) != -1) {
                        read += count;
                        out.write(bytes, 0, count);
                        publishProgress((int) ((read * 100) / length));
                    }
                    bitmap = BitmapFactory.decodeByteArray(out.toByteArray(), 0, out.size());
                } else {
                    is = connection.getInputStream();
                    bitmap = BitmapFactory.decodeStream(is);
                }
            } catch (Throwable e) {
                if (!this.isCancelled()) {
                    error = new ImageError(e).setErrorCode(ImageError.ERROR_GENERAL_EXCEPTION);
                    this.cancel(true);
                }
            } finally {
                try {
                    if (connection != null)
                        connection.disconnect();
                    if (out != null) {
                        out.flush();
                        out.close();
                    }
                    if (is != null)
                        is.close();
                } catch (Exception e) {
                    e.printStackTrace();
                }
            }
            return bitmap;
        }

            @Override
            protected void onPostExecute(Bitmap result) {
                if (result == null) {
                    Log.e(TAG, "factory returned a null result");
                    mImageLoaderListener.onError(new ImageError("downloaded file could not be decoded as bitmap")
                            .setErrorCode(ImageError.ERROR_DECODE_FAILED));
                } else {
                    Log.d(TAG, "download complete, " + result.getByteCount() +
                            " bytes transferred");
                    mImageLoaderListener.onComplete(result);
                }
                mUrlsInProgress.remove(imageUrl);
                System.gc();
            }
        }.executeOnExecutor(AsyncTask.THREAD_POOL_EXECUTOR);
    }

    public interface OnBitmapSaveListener {
        void onBitmapSaved();
        void onBitmapSaveError(ImageError error);
    }


    public static void writeToDisk(@NonNull final File imageFile, @NonNull final Bitmap image,
                               @NonNull final OnBitmapSaveListener listener,
                               @NonNull final Bitmap.CompressFormat format, boolean shouldOverwrite) {

    if (imageFile.isDirectory()) {
        listener.onBitmapSaveError(new ImageError("the specified path points to a directory, " +
                "should be a file").setErrorCode(ImageError.ERROR_IS_DIRECTORY));
        return;
    }

    if (imageFile.exists()) {
        if (!shouldOverwrite) {
            listener.onBitmapSaveError(new ImageError("file already exists, " +
                    "write operation cancelled").setErrorCode(ImageError.ERROR_FILE_EXISTS));
            return;
        } else if (!imageFile.delete()) {
            listener.onBitmapSaveError(new ImageError("could not delete existing file, " +
                    "most likely the write permission was denied")
                    .setErrorCode(ImageError.ERROR_PERMISSION_DENIED));
            return;
        }
    }

    File parent = imageFile.getParentFile();
    if (!parent.exists() && !parent.mkdirs()) {
        listener.onBitmapSaveError(new ImageError("could not create parent directory")
                .setErrorCode(ImageError.ERROR_PERMISSION_DENIED));
        return;
    }

    try {
        if (!imageFile.createNewFile()) {
            listener.onBitmapSaveError(new ImageError("could not create file")
                    .setErrorCode(ImageError.ERROR_PERMISSION_DENIED));
            return;
        }
    } catch (IOException e) {
        listener.onBitmapSaveError(new ImageError(e).setErrorCode(ImageError.ERROR_GENERAL_EXCEPTION));
        return;
    }

    new AsyncTask<Void, Void, Void>() {

        private ImageError error;

        @Override
        protected Void doInBackground(Void... params) {
            FileOutputStream fos = null;
            try {
                fos = new FileOutputStream(imageFile);
                image.compress(format, 100, fos);
            } catch (IOException e) {
                error = new ImageError(e).setErrorCode(ImageError.ERROR_GENERAL_EXCEPTION);
                this.cancel(true);
            } finally {
                if (fos != null) {
                    try {
                        fos.flush();
                        fos.close();
                    } catch (IOException e) {
                        e.printStackTrace();
                    }
                }
            }
            return null;
        }

        @Override
        protected void onCancelled() {
            listener.onBitmapSaveError(error);
        }

        @Override
        protected void onPostExecute(Void result) {
            listener.onBitmapSaved();
        }
    }.executeOnExecutor(AsyncTask.THREAD_POOL_EXECUTOR);
  }

public static Bitmap readFromDisk(@NonNull File imageFile) {
    if (!imageFile.exists() || imageFile.isDirectory()) return null;
    return BitmapFactory.decodeFile(imageFile.getAbsolutePath());
}

public interface OnImageReadListener {
    void onImageRead(Bitmap bitmap);
    void onReadFailed();
}

public static void readFromDiskAsync(@NonNull File imageFile, @NonNull final OnImageReadListener listener) {
    new AsyncTask<String, Void, Bitmap>() {
        @Override
        protected Bitmap doInBackground(String... params) {
            return BitmapFactory.decodeFile(params[0]);
        }

        @Override
        protected void onPostExecute(Bitmap bitmap) {
            if (bitmap != null)
                listener.onImageRead(bitmap);
            else
                listener.onReadFailed();
        }
    }.executeOnExecutor(AsyncTask.THREAD_POOL_EXECUTOR, imageFile.getAbsolutePath());
}

    public static final class ImageError extends Throwable {

        private int errorCode;
        public static final int ERROR_GENERAL_EXCEPTION = -1;
        public static final int ERROR_INVALID_FILE = 0;
        public static final int ERROR_DECODE_FAILED = 1;
        public static final int ERROR_FILE_EXISTS = 2;
        public static final int ERROR_PERMISSION_DENIED = 3;
        public static final int ERROR_IS_DIRECTORY = 4;


        public ImageError(@NonNull String message) {
            super(message);
        }

        public ImageError(@NonNull Throwable error) {
            super(error.getMessage(), error.getCause());
            this.setStackTrace(error.getStackTrace());
        }

        public ImageError setErrorCode(int code) {
            this.errorCode = code;
            return this;
        }

        public int getErrorCode() {
            return errorCode;
        }
      }
   }

write

sudo apt-get install net-tools

A call to your parent class's empty constructor super() is done automatically when you don't do it yourself. That's the reason you've never had to do it in your code. It was done for you.

When your superclass doesn't have a no-arg constructor, the compiler will require you to call super with the appropriate arguments. The compiler will make sure that you instantiate the class correctly. So this is not something you have to worry about too much.

Whether you call super() in your constructor or not, it doesn't affect your ability to call the methods of your parent class.

As a side note, some say that it's generally best to make that call manually for reasons of clarity.

C90 does not support the boolean data type.

C99 does include it with this include:

#include <stdbool.h>

Kevin's code creates redundant MarginLayoutParams object. Simpler version:

ImageView image = (ImageView) findViewById(R.id.main_image);
RelativeLayout.LayoutParams lp = new RelativeLayout.LayoutParams(image.getLayoutParams());
lp.setMargins(50, 100, 0, 0);
image.setLayoutParams(lp);

I do the following in Mint 15 through 17, also works on ubuntu server 12.04 and above:

sudo vi /etc/bash.bashrc 

scroll to the bottom, and add:

export LD_LIBRARY_PATH=.

All users have the environment variable added.

Solution using Java 8 features such as Stream API and Method references

new BufferedReader(new StringReader(myString))
        .lines().forEach(System.out::println);

or

public void someMethod(String myLongString) {

    new BufferedReader(new StringReader(myLongString))
            .lines().forEach(this::parseString);
}

private void parseString(String data) {
    //do something
}

Array notation and pointer arithmetic can be used interchangeably in C/C++ (this is not true for ALL the cases but by the time you get there, you will find the cases yourself). So although str is a pointer, you can use it as if it were an array like so:

char char_E = str[1];
char char_L1 = str[2];
char char_O = str[4];

...and so on. What you could also do is "add" 1 to the value of the pointer to a character str which will then point to the second character in the string. Then you can simply do:

str = str + 1; // makes it point to 'E' now
char myChar =  *str;

I hope this helps.

The most important part is the concepts. Once you understand how the building blocks work, differences in syntax amount to little more than mild dialects. A layer on top of your regular expression engine's syntax is the syntax of the programming language you're using. Languages such as Perl remove most of this complication, but you'll have to keep in mind other considerations if you're using regular expressions in a C program.

If you think of regular expressions as building blocks that you can mix and match as you please, it helps you learn how to write and debug your own patterns but also how to understand patterns written by others.

Start simple

Conceptually, the simplest regular expressions are literal characters. The pattern N matches the character 'N'.

Regular expressions next to each other match sequences. For example, the pattern Nick matches the sequence 'N' followed by 'i' followed by 'c' followed by 'k'.

If you've ever used grep on Unix—even if only to search for ordinary looking strings—you've already been using regular expressions! (The re in grep refers to regular expressions.)

Order from the menu

Adding just a little complexity, you can match either 'Nick' or 'nick' with the pattern [Nn]ick. The part in square brackets is a character class, which means it matches exactly one of the enclosed characters. You can also use ranges in character classes, so [a-c] matches either 'a' or 'b' or 'c'.

The pattern . is special: rather than matching a literal dot only, it matches any character^†. It's the same conceptually as the really big character class [-.?+%$A-Za-z0-9...].

Think of character classes as menus: pick just one.

Helpful shortcuts

Using . can save you lots of typing, and there are other shortcuts for common patterns. Say you want to match a digit: one way to write that is [0-9]. Digits are a frequent match target, so you could instead use the shortcut \d. Others are \s (whitespace) and \w (word characters: alphanumerics or underscore).

The uppercased variants are their complements, so \S matches any non-whitespace character, for example.

Once is not enough

From there, you can repeat parts of your pattern with quantifiers. For example, the pattern ab?c matches 'abc' or 'ac' because the ? quantifier makes the subpattern it modifies optional. Other quantifiers are

• * (zero or more times)
• + (one or more times)
• {n} (exactly n times)
• {n,} (at least n times)
• {n,m} (at least n times but no more than m times)

Putting some of these blocks together, the pattern [Nn]*ick matches all of

• ick
• Nick
• nick
• Nnick
• nNick
• nnick
• (and so on)

The first match demonstrates an important lesson: * always succeeds! Any pattern can match zero times.

A few other useful examples:

• [0-9]+ (and its equivalent \d+) matches any non-negative integer
• \d{4}-\d{2}-\d{2} matches dates formatted like 2019-01-01

Grouping

A quantifier modifies the pattern to its immediate left. You might expect 0abc+0 to match '0abc0', '0abcabc0', and so forth, but the pattern immediately to the left of the plus quantifier is c. This means 0abc+0 matches '0abc0', '0abcc0', '0abccc0', and so on.

To match one or more sequences of 'abc' with zeros on the ends, use 0(abc)+0. The parentheses denote a subpattern that can be quantified as a unit. It's also common for regular expression engines to save or "capture" the portion of the input text that matches a parenthesized group. Extracting bits this way is much more flexible and less error-prone than counting indices and substr.

Alternation

Earlier, we saw one way to match either 'Nick' or 'nick'. Another is with alternation as in Nick|nick. Remember that alternation includes everything to its left and everything to its right. Use grouping parentheses to limit the scope of |, e.g., (Nick|nick).

For another example, you could equivalently write [a-c] as a|b|c, but this is likely to be suboptimal because many implementations assume alternatives will have lengths greater than 1.

Escaping

Although some characters match themselves, others have special meanings. The pattern \d+ doesn't match backslash followed by lowercase D followed by a plus sign: to get that, we'd use \\d\+. A backslash removes the special meaning from the following character.

Greediness

Regular expression quantifiers are greedy. This means they match as much text as they possibly can while allowing the entire pattern to match successfully.

For example, say the input is

"Hello," she said, "How are you?"

You might expect ".+" to match only 'Hello,' and will then be surprised when you see that it matched from 'Hello' all the way through 'you?'.

To switch from greedy to what you might think of as cautious, add an extra ? to the quantifier. Now you understand how \((.+?)\), the example from your question works. It matches the sequence of a literal left-parenthesis, followed by one or more characters, and terminated by a right-parenthesis.

If your input is '(123) (456)', then the first capture will be '123'. Non-greedy quantifiers want to allow the rest of the pattern to start matching as soon as possible.

(As to your confusion, I don't know of any regular-expression dialect where ((.+?)) would do the same thing. I suspect something got lost in transmission somewhere along the way.)

Anchors

Use the special pattern ^ to match only at the beginning of your input and $ to match only at the end. Making "bookends" with your patterns where you say, "I know what's at the front and back, but give me everything between" is a useful technique.

Say you want to match comments of the form

-- This is a comment --

you'd write ^--\s+(.+)\s+--$.

Build your own

Regular expressions are recursive, so now that you understand these basic rules, you can combine them however you like.

Tools for writing and debugging regexes:

• RegExr (for JavaScript)
• Perl: YAPE: Regex Explain
• Regex Coach (engine backed by CL-PPCRE)
• RegexPal (for JavaScript)
• Regular Expressions Online Tester
• Regex Buddy
• Regex 101 (for PCRE, JavaScript, Python, Golang)
• Visual RegExp
• Expresso (for .NET)
• Rubular (for Ruby)
• Regular Expression Library (Predefined Regexes for common scenarios)
• Txt2RE
• Regex Tester (for JavaScript)
• Regex Storm (for .NET)
• Debuggex (visual regex tester and helper)

Books

• Mastering Regular Expressions, the 2nd Edition, and the 3rd edition.
• Regular Expressions Cheat Sheet
• Regex Cookbook
• Teach Yourself Regular Expressions

Free resources

• RegexOne - Learn with simple, interactive exercises.
• Regular Expressions - Everything you should know (PDF Series)
• Regex Syntax Summary
• How Regexes Work

Footnote

†: The statement above that . matches any character is a simplification for pedagogical purposes that is not strictly true. Dot matches any character except newline, "\n", but in practice you rarely expect a pattern such as .+ to cross a newline boundary. Perl regexes have a /s switch and Java Pattern.DOTALL, for example, to make . match any character at all. For languages that don't have such a feature, you can use something like [\s\S] to match "any whitespace or any non-whitespace", in other words anything.

Updated Answer

As of June11, 2018 it is now mandatory to have a billing account to get API key. You can still make keyless calls to the Maps JavaScript API and Street View Static API which will return low-resolution maps that can be used for development. Enabling billing still gives you $200 free credit monthly for your projects.

This answer is no longer valid

As long as you're using a testing API key it is free to register and use. But when you move your app to commercial level you have to pay for it. When you enable billing, google gives you $200 credit free each month that means if your app's map usage is low you can still use it for free even after the billing enabled, if it exceeds the credit limit now you have to pay for it.

I had the same problem, today 2016 - october - 06 I solved with this:

I changed all dependencies that began with 9.?.? to 9.6.1 I compiled with sdk version 24 and target version 17.

There is another packages in my solution because I used more things then only authentication.

After changed your build.gradle (Module:app) with the code below do it:

1. Put your package NAME in the line with the words applicationId "com.YOUR_PACKAGE_HERE"

2. Synchronize your project (Ctrl+alt+v) and Build Again.

This is the code of the file buid.gradle (Module:app) that worked for me:

apply plugin: 'com.android.application'

android {
    compileSdkVersion 24
    buildToolsVersion "24.0.3"
    defaultConfig {
        applicationId "com.YOUR_PACKAGE_HERE"
        minSdkVersion 24
        targetSdkVersion 17
        versionCode 1
        versionName "1.0"
        testInstrumentationRunner "android.support.test.runner.AndroidJUnitRunner"
    }
    buildTypes {
        release {
            minifyEnabled false
            proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
        }
    }
}

dependencies {
    compile fileTree(dir: 'libs', include: ['*.jar'])
    androidTestCompile('com.android.support.test.espresso:espresso-core:2.2.2', {
        exclude group: 'com.android.support', module: 'support-annotations'
    })

    compile 'com.google.firebase:firebase-core:9.6.1'
    compile 'com.google.firebase:firebase-database:9.6.1'

    compile 'com.android.support:appcompat-v7:24.2.1'
    compile 'com.android.support:design:24.2.1'

    compile 'com.google.firebase:firebase-crash:9.6.1'
    testCompile 'junit:junit:4.12'

    compile 'com.google.firebase:firebase-messaging:9.6.1'

    compile 'com.google.firebase:firebase-ads:9.6.1'


    compile 'com.google.firebase:firebase-auth:9.6.1'


    compile 'com.google.android.gms:play-services:9.6.1'

}
apply plugin: 'com.google.gms.google-services'

@echo off
setlocal
set "list=a b c d"
(
 for %%i in (%list%) do (
  echo(%%i
  echo(
 )
)>file.txt

You don't need - actually, can't "declare" variables in batch. Assigning a value to a variable creates it, and assigning an empty string deletes it. Any variable name that doesn't have an assigned value HAS a value of an empty string. ALL variables are strings - WITHOUT exception. There ARE operations that appear to perform (integer) mathematical functions, but they operate by converting back and forth from strings.

Batch is sensitive to spaces in variable names, so your assignment as posted would assign the string "A B C D" - including the quotes, to the variable "list " - NOT including the quotes, but including the space. The syntax set "var=string" is used to assign the value string to var whereas set var=string will do the same thing. Almost. In the first case, any stray trailing spaces after the closing quote are EXCLUDED from the value assigned, in the second, they are INCLUDED. Spaces are a little hard to see when printed.

ECHO echoes strings. Clasically, it is followed by a space - one of the default separators used by batch (the others are TAB, COMMA, SEMICOLON - any of these do just as well BUT TABS often get transformed to a space-squence by text-editors and the others have grown quirks of their own over the years.) Other characters following the O in ECHO have been found to do precisely what the documented SPACE should do. DOT is common. Open-parenthesis ( is probably the most useful since the command

ECHO.%emptyvalue%

will produce a report of the ECHO state (ECHO is on/off) whereas

ECHO(%emptyvalue%

will produce an empty line.

The problem with ECHO( is that the result "looks" unbalanced.

Center with Paint.getTextBounds():

private Rect r = new Rect();

private void drawCenter(Canvas canvas, Paint paint, String text) {
    canvas.getClipBounds(r);
    int cHeight = r.height();
    int cWidth = r.width();
    paint.setTextAlign(Paint.Align.LEFT);
    paint.getTextBounds(text, 0, text.length(), r);
    float x = cWidth / 2f - r.width() / 2f - r.left;
    float y = cHeight / 2f + r.height() / 2f - r.bottom;
    canvas.drawText(text, x, y, paint);
}

• Paint.Align.CENTER doesn't mean that the reference point of the text is vertically centered. The reference point is always on the baseline. So, why not use Paint.Align.LEFT? You have to calculate the reference point anyway.

• Paint.descent() has the disadvantage, that it doesn't consider the real text. Paint.descent() retrieves the same value, regardless of whether the text contains letters with descents or not. That's why I use r.bottom instead.

• I have had some problems with Canvas.getHeight() if API < 16. That's why I use Canvas.getClipBounds(Rect) instead. (Do not use Canvas.getClipBounds().getHeight() as it allocates memory for a Rect.)

• For reasons of performance, you should allocate objects before they are used in onDraw(). As drawCenter() will be called within onDraw() the object Rect r is preallocated as a field here.

I tried to put the code of the two top answers into my own code (August 2015) and made a screenshot to compare the results:

The text should be centered within the red filled rectangle. My code produces the white text, the other two codes produces altogether the gray text (they are actually the same, overlapping). The gray text is a little bit too low and two much on the right.

This is how I made the test:

import android.app.Activity;
import android.content.Context;
import android.content.pm.ActivityInfo;
import android.graphics.Canvas;
import android.graphics.Color;
import android.graphics.Paint;
import android.graphics.Rect;
import android.graphics.RectF;
import android.graphics.Typeface;
import android.os.Bundle;
import android.view.View;
import android.view.ViewGroup;
import android.widget.FrameLayout;

class MyView extends View {

    private static String LABEL = "long";
    private static float TEXT_HEIGHT_RATIO = 0.82f;

    private FrameLayout.LayoutParams params = new FrameLayout.LayoutParams(0, 0);
    private Rect r = new Rect();
    private Paint paint = new Paint();
    private Paint rectPaint = new Paint();

    public MyView(Context context) {
        super(context);
    }

    private void drawTextBounds(Canvas canvas, Rect rect, int x, int y) {
        rectPaint.setColor(Color.rgb(0, 0, 0));
        rectPaint.setStyle(Paint.Style.STROKE);
        rectPaint.setStrokeWidth(3f);
        rect.offset(x, y);
        canvas.drawRect(rect, rectPaint);
    }

    // andreas1724 (white color):
    private void draw1(Canvas canvas, Paint paint, String text) {
        paint.setTextAlign(Paint.Align.LEFT);
        paint.setColor(Color.rgb(255, 255, 255));
        canvas.getClipBounds(r);
        int cHeight = r.height();
        int cWidth = r.width();
        paint.getTextBounds(text, 0, text.length(), r);
        float x = cWidth / 2f - r.width() / 2f - r.left;
        float y = cHeight / 2f + r.height() / 2f - r.bottom;
        canvas.drawText(text, x, y, paint);
        drawTextBounds(canvas, r, (int) x, (int) y);
    }

    // Arun George (light green color):
    private void draw2(Canvas canvas, Paint textPaint, String text) {
        textPaint.setTextAlign(Paint.Align.CENTER);
        textPaint.setColor(Color.argb(100, 0, 255, 0));
        int xPos = (canvas.getWidth() / 2);
        int yPos = (int) ((canvas.getHeight() / 2) - ((textPaint.descent() + textPaint.ascent()) / 2));
        canvas.drawText(text, xPos, yPos, textPaint);
    }

    // VinceStyling (light blue color):
    private void draw3(Canvas yourCanvas, Paint mPaint, String pageTitle) {
        mPaint.setTextAlign(Paint.Align.LEFT);
        mPaint.setColor(Color.argb(100, 0, 0, 255));
        r = yourCanvas.getClipBounds();
        RectF bounds = new RectF(r);
        bounds.right = mPaint.measureText(pageTitle, 0, pageTitle.length());
        bounds.bottom = mPaint.descent() - mPaint.ascent();
        bounds.left += (r.width() - bounds.right) / 2.0f;
        bounds.top += (r.height() - bounds.bottom) / 2.0f;
        yourCanvas.drawText(pageTitle, bounds.left, bounds.top - mPaint.ascent(), mPaint);
    }

    @Override
    protected void onSizeChanged(int w, int h, int oldw, int oldh) {
        super.onSizeChanged(w, h, oldw, oldh);
        int margin = 10;
        int width = w - 2 * margin;
        int height = h - 2 * margin;
        params.width = width;
        params.height = height;
        params.leftMargin = margin;
        params.topMargin = margin;
        setLayoutParams(params);
        paint.setTextSize(height * TEXT_HEIGHT_RATIO);
        paint.setAntiAlias(true);
        paint.setTypeface(Typeface.create(Typeface.SERIF, Typeface.BOLD_ITALIC));
    }

    @Override
    protected void onDraw(Canvas canvas) {
        super.onDraw(canvas);
        canvas.drawColor(Color.rgb(255, 0, 0));
        draw1(canvas, paint, LABEL);
        draw2(canvas, paint, LABEL);
        draw3(canvas, paint, LABEL);
    }
}

public class MainActivity extends Activity {

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setRequestedOrientation (ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE);
        FrameLayout container = new FrameLayout(this);
        container.setLayoutParams(new ViewGroup.LayoutParams(
                ViewGroup.LayoutParams.MATCH_PARENT,
                ViewGroup.LayoutParams.MATCH_PARENT));
        container.addView(new MyView(this));
        setContentView(container);
    }
}

Create a class Language

public class Language
{
     public string Name{get;set;}
     public string Value{get;set;}
     public override string ToString() { return this.Name;}
}

Then, add as many language to the combobox that you want:

yourCombobox.Items.Add(new Language{Name="English",Value="En"});

People will offer you obfuscators, but no amount of obfuscation can prevent someone from getting at your code. None. If your computer can run it, or in the case of movies and music if it can play it, the user can get at it. Even compiling it to machine code just makes the job a little more difficult. If you use an obfuscator, you are just fooling yourself. Worse, you're also disallowing your users from fixing bugs or making modifications.

Music and movie companies haven't quite come to terms with this yet, they still spend millions on DRM.

In interpreted languages like PHP and Perl it's trivial. Perl used to have lots of code obfuscators, then we realized you can trivially decompile them.

perl -MO=Deparse some_program

PHP has things like DeZender and Show My Code.

My advice? Write a license and get a lawyer. The only other option is to not give out the code and instead run a hosted service.

See also the perlfaq entry on the subject.

The first is not working of course. The controls on a form are private, visible only for that form by design.

To make it all public is also not the best way.

If I would like to expose something to the outer world (which also can mean an another form), I make a public property for it.

public Boolean nameOfControlVisible
{
    get { return this.nameOfControl.Visible; }
    set { this.nameOfControl.Visible = value; }
}

You can use this public property to hide or show the control or to ask the control current visibility property:

otherForm.nameOfControlVisible = true;

You can also expose full controls, but I think it is too much, you should make visible only the properties you really want to use from outside the current form.

public ControlType nameOfControlP
{
    get { return this.nameOfControl; }
    set { this.nameOfControl = value; }
}

Use the following will help

keytool -import -v -trustcacerts -alias keyAlias -file server.cer -keystore cacerts.jks -keypass changeit

After closing and reopening VS, this should resolve.

LAST EDIT: after 7 years I'm still getting upvotes for this answer, but I guess this one is now much more accurate.

Sure you can, but you'll need to render the page with something. If you really want to only use php, I suggest you HTMLTOPS, which renders the page and outputs it in a ps file (ghostscript), then, convert it in a .jpg, .png, .pdf.. can be little slower with complex pages (and don't support all the CSS).

Else, you can use wkhtmltopdf to output a html page in pdf, jpg, whatever.. Accept CSS2.0, use the webkit (safari's wrapper) to render the page.. so should be fine. You have to install it on your server, as well..

UPDATE Now, with new HTML5 and JS feature, is also possible to render the page into a canvas object using JavaScript. Here a nice library to do that: Html2Canvas and here is an implementation by the same author to get a feedback like G+. Once you have rendered the dom into the canvas, you can then send to the server via ajax and save it as a jpg.

EDIT: You can use the imagemagick tool for transforming pdf to png. My version of wkhtmltopdf does not support images. E.g. convert html.pdf -append html.png.

EDIT: This small shell script gives a simple / but working usage example on linux with php5-cli and the tools mentioned above.

EDIT: i noticed now that the wkhtmltopdf team is working on another project: wkhtmltoimage, that gives you the jpg directly

You mention adding the additional include directory (C/C++|General) and additional lib dependency (Linker|Input), but have you also added the additional library directory (Linker|General)?

Including a sample error message might also help people answer the question since it's not even clear if the error is during compilation or linking.

My tricky solution is:

1. Open your windows Task Manager,
2. Find the Javaw.exe process and highlight it, then End it by End Process
3. In eclipse project browser, right click it and use Maven -> Update Project again.

Issue is resolved.

If you have Tomcat Server Running in Eclipse, you need to refresh project before restart Tomcat Server.

$fondo: url(/grid/assets/img/backimage.png);    
{ padding: 0; margin: 0; } 
body { 
    ::before{
        content:"" ; height: 1008px; width: 100%; display: flex; position: absolute; 
        background-image: $fondo ; background-repeat: no-repeat ; background-position: 
        center; background-size: cover; filter: blur(1.6rem);
    }
}

Instead of converting the class to a function, an easy step would be to create a function to include the jsx for the component which uses the 'classes', in your case the <container></container> and then call this function inside the return of the class render() as a tag. This way you are moving out the hook to a function from the class. It worked perfectly for me. In my case it was a <table> which i moved to a function- TableStmt outside and called this function inside the render as <TableStmt/>

Non bare repository allows you to (into your working tree) capture changes by creating new commits.

Bare repositories are only changed by transporting changes from other repositories.

That's an Object and you want to count the properties of it.

Object.keys(jsonArray).length

References:

• Object.keys.
• Kangax's compat table.

No trick necessary.

grep --with-filename 'pattern' file

With line numbers:

grep -n --with-filename 'pattern' file

Try using Joda Time instead of standard java.util.Date classes. Joda Time library has much better API for handling dates.

DateTime dt = new DateTime();  // current time
int month = dt.getMonth();     // gets the current month
int hours = dt.getHourOfDay(); // gets hour of day

See this question for pros and cons of using Joda Time library.

Joda Time may also be included to some future version of Java as a standard component, see JSR-310.

If you must use traditional java.util.Date and java.util.Calendar classes, see their JavaDoc's for help (java.util.Calendar and java.util.Date).

You can use the traditional classes like this to fetch fields from given Date instance.

Date date = new Date();   // given date
Calendar calendar = GregorianCalendar.getInstance(); // creates a new calendar instance
calendar.setTime(date);   // assigns calendar to given date 
calendar.get(Calendar.HOUR_OF_DAY); // gets hour in 24h format
calendar.get(Calendar.HOUR);        // gets hour in 12h format
calendar.get(Calendar.MONTH);       // gets month number, NOTE this is zero based!

Turn if off:

You can use error_reporting(); or put an @ in front of your fileopen().

This solution is based from this website: http://social.msdn.microsoft.com/Forums/en-US/bd0ee306-7bb5-4ce4-8341-edd9475f84ad/excel-2007-use-vba-to-download-save-csv-from-url

It is slightly modified to overwrite existing file and to pass along login credentials.

Sub DownloadFile()

Dim myURL As String
myURL = "https://YourWebSite.com/?your_query_parameters"

Dim WinHttpReq As Object
Set WinHttpReq = CreateObject("Microsoft.XMLHTTP")
WinHttpReq.Open "GET", myURL, False, "username", "password"
WinHttpReq.send

If WinHttpReq.Status = 200 Then
    Set oStream = CreateObject("ADODB.Stream")
    oStream.Open
    oStream.Type = 1
    oStream.Write WinHttpReq.responseBody
    oStream.SaveToFile "C:\file.csv", 2 ' 1 = no overwrite, 2 = overwrite
    oStream.Close
End If

End Sub

Syntax:

$data = Model::whereIn('field_name', [1, 2, 3])->get();

Use for Users Model

$usersList = Users::whereIn('id', [1, 2, 3])->get();

I've been testing this myself, and looking at all the answers on this post and I don't think they answer this question very well. I experimented myself in order to get a good answer (code below). You CAN fire either event with both ActionListener and ItemListener 100% of the time when a state is changed in either a radio button or a check box, or any other kind of Swing item I'm assuming since it is type Object. The ONLY difference I can tell between these two listeners is the type of Event Object that gets returned with the listener is different. AND you get a better event type with a checkbox using an ItemListener as opposed to an ActionListener.

The return types of an ActionEvent and an ItemEvent will have different methods stored that may be used when an Event Type gets fired. In the code below the comments show the difference in .get methods for each Class returned Event type.

The code below sets up a simple JPanel with JRadioButtons, JCheckBoxes, and a JLabel display that changes based on button configs. I set all the RadioButtons and CheckBoxes up with both an Action Listener and an Item Listener. Then I wrote the Listener classes below with ActionListener fully commented because I tested it first in this experiment. You will notice that if you add this panel to a frame and display, all radiobuttons and checkboxes always fire regardless of the Listener type, just comment out the methods in one and try the other and vice versa.

Return Type into the implemented methods is the MAIN difference between the two. Both Listeners fire events the same way. Explained a little better in comment above is the reason a checkbox should use an ItemListener over ActionListener due to the Event type that is returned.

package EventHandledClasses;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;

public class RadioButtonsAndCheckBoxesTest extends JPanel{
JLabel display;
String funny, serious, political;
JCheckBox bold,italic;
JRadioButton funnyQuote, seriousQuote, politicalQuote;
ButtonGroup quotes;

    public RadioButtonsAndCheckBoxesTest(){
        funny = "You are not ugly, you were just born... different";
        serious = "Recommend powdered soap in prison!";
        political = "Trump can eat a little Bernie, but will choke on his     Birdie";

        display = new JLabel(funny);
        Font defaultFont = new Font("Ariel",Font.PLAIN,20);
        display.setFont(defaultFont);

        bold = new JCheckBox("Bold",false);
        bold.setOpaque(false);
        italic = new JCheckBox("Italic",false);
        italic.setOpaque(false);

        //Color itemBackground =

        funnyQuote = new JRadioButton("Funny",true);
        funnyQuote.setOpaque(false);
        seriousQuote = new JRadioButton("Serious");
        seriousQuote.setOpaque(false);
        politicalQuote = new JRadioButton("Political");
        politicalQuote.setOpaque(false);

        quotes = new ButtonGroup();
        quotes.add(funnyQuote);
        quotes.add(seriousQuote);
        quotes.add(politicalQuote);

        JPanel primary = new JPanel();
        primary.setPreferredSize(new Dimension(550, 100));

        Dimension standard = new Dimension(500, 30);

        JPanel radioButtonsPanel = new JPanel();
        radioButtonsPanel.setPreferredSize(standard);
        radioButtonsPanel.setBackground(Color.green);
        radioButtonsPanel.add(funnyQuote);
        radioButtonsPanel.add(seriousQuote);
        radioButtonsPanel.add(politicalQuote);

        JPanel checkBoxPanel = new JPanel();
        checkBoxPanel.setPreferredSize(standard);
        checkBoxPanel.setBackground(Color.green);
        checkBoxPanel.add(bold);
        checkBoxPanel.add(italic);

        primary.add(display);
        primary.add(radioButtonsPanel);
        primary.add(checkBoxPanel);

        //Add Action Listener To test Radio Buttons
        funnyQuote.addActionListener(new ActionListen());
        seriousQuote.addActionListener(new ActionListen());
        politicalQuote.addActionListener(new ActionListen());

        //Add Item Listener to test Radio Buttons
        funnyQuote.addItemListener(new ItemListen());
        seriousQuote.addItemListener(new ItemListen());
        politicalQuote.addItemListener(new ItemListen());

        //Add Action Listener to test Check Boxes
        bold.addActionListener(new ActionListen());
        italic.addActionListener(new ActionListen());

        //Add Item Listener to test Check Boxes
        bold.addItemListener(new ItemListen());
        italic.addItemListener(new ItemListen());

        //adds primary JPanel to this JPanel Object
        add(primary);   
    }

    private class ActionListen implements ActionListener{

        public void actionPerformed(ActionEvent e) {

         /*
         Different Get Methods from  ItemEvent 
         e.getWhen()
         e.getModifiers()
         e.getActionCommand()*/

            /*int font=Font.PLAIN;
            if(bold.isSelected()){
                font += Font.BOLD;
            }
            if(italic.isSelected()){
                font += Font.ITALIC;
            }
            display.setFont(new Font("Ariel",font,20));

            if(funnyQuote.isSelected()){
                display.setText(funny);
            }
            if(seriousQuote.isSelected()){
                display.setText(serious);
            }
            if(politicalQuote.isSelected()){
                display.setText(political);
            }*/
        }
    }
    private class ItemListen implements ItemListener {

        public void itemStateChanged(ItemEvent arg0) {

            /*
            Different Get Methods from ActionEvent
            arg0.getItemSelectable()
            arg0.getStateChange()
            arg0.getItem()*/


            int font=Font.PLAIN;
            if(bold.isSelected()){
                font += Font.BOLD;
            }
            if(italic.isSelected()){
                font += Font.ITALIC;
            }
            display.setFont(new Font("Ariel",font,20));

            if(funnyQuote.isSelected()){
                display.setText(funny);
            }
            if(seriousQuote.isSelected()){
                display.setText(serious);
            }
            if(politicalQuote.isSelected()){
                display.setText(political);
            }

        }

    }
}

use html5's new attribute srcdoc (srcdoc-polyfill) Docs

<iframe srcdoc="<html><body>Hello, <b>world</b>.</body></html>"></iframe>

Browser support - Tested in the following browsers:

Microsoft Internet Explorer
6, 7, 8, 9, 10, 11
Microsoft Edge
13, 14
Safari
4, 5.0, 5.1 ,6, 6.2, 7.1, 8, 9.1, 10
Google Chrome
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24.0.1312.5 (beta), 25.0.1364.5 (dev), 55
Opera
11.1, 11.5, 11.6, 12.10, 12.11 (beta) , 42
Mozilla FireFox
3.0, 3.6, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 (beta), 50

this is my first code on this site try this

import java.util.Scanner;
public class BATM {

public static void main(String[] args) {
    Scanner input = new Scanner(System.in);

    String username;
    String password;

    System.out.println("Log in:");
    System.out.println("username: ");
    username = input.next();

    System.out.println("password: ");
    password = input.next();

    //users check = new users(username, password);

    if(username.equals(username) && password.equals(password)) 
        System.out.println("You are logged in");



}

}

Or you could use String.ToCharArray().
It takes int startindex and and int length as parameters and returns a char[]

new string(stringValue.ToCharArray(0,5))

You would still need to make sure the string has the proper length, otherwise it will throw a ArgumentOutOfRangeException

Create a table with column as type json

CREATE TABLE friends ( id serial primary key, data jsonb);

Now let's insert json data

INSERT INTO friends(data) VALUES ('{"name": "Arya", "work": ["Improvements", "Office"], "available": true}');
INSERT INTO friends(data) VALUES ('{"name": "Tim Cook", "work": ["Cook", "ceo", "Play"], "uses": ["baseball", "laptop"], "available": false}');

Now let's make some queries to fetch data

select data->'name' from friends;
select data->'name' as name, data->'work' as work from friends;

You might have noticed that the results comes with inverted comma( " ) and brackets ([ ])

    name    |            work            
------------+----------------------------
 "Arya"     | ["Improvements", "Office"]
 "Tim Cook" | ["Cook", "ceo", "Play"]
(2 rows)

Now to retrieve only the values just use ->>

select data->>'name' as name, data->'work'->>0 as work from friends;
select data->>'name' as name, data->'work'->>0 as work from friends where data->>'name'='Arya';

Simple, [yourobject class] it will return the class name of yourobject.

Self validated model

Your model should implement an interface IValidatableObject. Put your validation code in Validate method:

public class MyModel : IValidatableObject
{
    public string Title { get; set; }
    public string Description { get; set; }

    public IEnumerable<ValidationResult> Validate(ValidationContext validationContext)
    {
        if (Title == null)
            yield return new ValidationResult("*", new [] { nameof(Title) });

        if (Description == null)
            yield return new ValidationResult("*", new [] { nameof(Description) });
    }
}

Please notice: this is a server-side validation. It doesn't work on client-side. You validation will be performed only after form submission.

If the library is included in the VS project, you can check .cproj file, e.g.:

<ItemGroup>
    <Reference Include="Microsoft.Dynamic, Version=1.1.0.20, Culture=neutral, PublicKeyToken=7f709c5b713576e1, processorArchitecture=MSIL">
...

To multiply a column of numbers with a constant(same number), I have done like this.

Let C2 to C12 be different numbers which need to be multiplied by a single number (constant). Then type the numbers from C2 to C12.

In D2 type 1 (unity) and in E2 type formula =PRODUCT(C2:C12,CONSTANT). SELECT RIGHT ICON TO APPLY. NOW DRAG E2 THROUGH E12. YOU HAVE DONE IT.

C       D       E=PRODUCT(C2:C12,20)

25  1   500
30      600
35      700
40      800
45      900
50      1000
55      1100
60      1200
65      1300
70      1400
75      1500

You can try like this.
Create Class with element id.

      public Enum MyEnum {
        THIS(5),
        THAT(16),
        THE_OTHER(35);

        private int id; // Could be other data type besides int
        private MyEnum(int id) {
            this.id = id;
        }

        public static MyEnum fromId(int id) {
                for (MyEnum type : values()) {
                    if (type.getId() == id) {
                        return type;
                    }
                }
                return null;
            }
      }

Now Fetch this Enum using id as int.

MyEnum myEnum = MyEnum.fromId(5);

Specify crossAxisAlignment: CrossAxisAlignment.start in your column

Once more a solution... Because there's always one more:

perl -i -pe 's/\r//' filename

It's nice because it's in place and works in every flavor of unix/linux I've worked with.

You can use the git show command.

To get the last commit date from git repository in a long(Unix epoch timestamp):

• Command: git show -s --format=%ct
• Result: 1605103148

Note: You can visit the git-show documentation to get a more detailed description of the options.

I just wrote a parser that I called Yay! (Yaml ain't Yamlesque!) which parses Yamlesque, a small subset of YAML. So, if you're looking for a 100% compliant YAML parser for Bash then this isn't it. However, to quote the OP, if you want a structured configuration file which is as easy as possible for a non-technical user to edit that is YAML-like, this may be of interest.

It's inspred by the earlier answer but writes associative arrays (yes, it requires Bash 4.x) instead of basic variables. It does so in a way that allows the data to be parsed without prior knowledge of the keys so that data-driven code can be written.

As well as the key/value array elements, each array has a keys array containing a list of key names, a children array containing names of child arrays and a parent key that refers to its parent.

This is an example of Yamlesque:

root_key1: this is value one
root_key2: "this is value two"

drink:
  state: liquid
  coffee:
    best_served: hot
    colour: brown
  orange_juice:
    best_served: cold
    colour: orange

food:
  state: solid
  apple_pie:
    best_served: warm

root_key_3: this is value three

Here is an example showing how to use it:

#!/bin/bash
# An example showing how to use Yay

. /usr/lib/yay

# helper to get array value at key
value() { eval echo \${$1[$2]}; }

# print a data collection
print_collection() {
  for k in $(value $1 keys)
  do
    echo "$2$k = $(value $1 $k)"
  done

  for c in $(value $1 children)
  do
    echo -e "$2$c\n$2{"
    print_collection $c "  $2"
    echo "$2}"
  done
}

yay example
print_collection example

which outputs:

root_key1 = this is value one
root_key2 = this is value two
root_key_3 = this is value three
example_drink
{
  state = liquid
  example_coffee
  {
    best_served = hot
    colour = brown
  }
  example_orange_juice
  {
    best_served = cold
    colour = orange
  }
}
example_food
{
  state = solid
  example_apple_pie
  {
    best_served = warm
  }
}

And here is the parser:

yay_parse() {

   # find input file
   for f in "$1" "$1.yay" "$1.yml"
   do
     [[ -f "$f" ]] && input="$f" && break
   done
   [[ -z "$input" ]] && exit 1

   # use given dataset prefix or imply from file name
   [[ -n "$2" ]] && local prefix="$2" || {
     local prefix=$(basename "$input"); prefix=${prefix%.*}
   }

   echo "declare -g -A $prefix;"

   local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
   sed -n -e "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
          -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" "$input" |
   awk -F$fs '{
      indent       = length($1)/2;
      key          = $2;
      value        = $3;

      # No prefix or parent for the top level (indent zero)
      root_prefix  = "'$prefix'_";
      if (indent ==0 ) {
        prefix = "";          parent_key = "'$prefix'";
      } else {
        prefix = root_prefix; parent_key = keys[indent-1];
      }

      keys[indent] = key;

      # remove keys left behind if prior row was indented more than this row
      for (i in keys) {if (i > indent) {delete keys[i]}}

      if (length(value) > 0) {
         # value
         printf("%s%s[%s]=\"%s\";\n", prefix, parent_key , key, value);
         printf("%s%s[keys]+=\" %s\";\n", prefix, parent_key , key);
      } else {
         # collection
         printf("%s%s[children]+=\" %s%s\";\n", prefix, parent_key , root_prefix, key);
         printf("declare -g -A %s%s;\n", root_prefix, key);
         printf("%s%s[parent]=\"%s%s\";\n", root_prefix, key, prefix, parent_key);
      }
   }'
}

# helper to load yay data file
yay() { eval $(yay_parse "$@"); }

There is some documentation in the linked source file and below is a short explanation of what the code does.

The yay_parse function first locates the input file or exits with an exit status of 1. Next, it determines the dataset prefix, either explicitly specified or derived from the file name.

It writes valid bash commands to its standard output that, if executed, define arrays representing the contents of the input data file. The first of these defines the top-level array:

echo "declare -g -A $prefix;"

Note that array declarations are associative (-A) which is a feature of Bash version 4. Declarations are also global (-g) so they can be executed in a function but be available to the global scope like the yay helper:

yay() { eval $(yay_parse "$@"); }

The input data is initially processed with sed. It drops lines that don't match the Yamlesque format specification before delimiting the valid Yamlesque fields with an ASCII File Separator character and removing any double-quotes surrounding the value field.

 local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
 sed -n -e "s|^\($s\)\($w\)$s:$s\"\(.*\)\"$s\$|\1$fs\2$fs\3|p" \
        -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p" "$input" |

The two expressions are similar; they differ only because the first one picks out quoted values where as the second one picks out unquoted ones.

The File Separator (28/hex 12/octal 034) is used because, as a non-printable character, it is unlikely to be in the input data.

The result is piped into awk which processes its input one line at a time. It uses the FS character to assign each field to a variable:

indent       = length($1)/2;
key          = $2;
value        = $3;

All lines have an indent (possibly zero) and a key but they don't all have a value. It computes an indent level for the line dividing the length of the first field, which contains the leading whitespace, by two. The top level items without any indent are at indent level zero.

Next, it works out what prefix to use for the current item. This is what gets added to a key name to make an array name. There's a root_prefix for the top-level array which is defined as the data set name and an underscore:

root_prefix  = "'$prefix'_";
if (indent ==0 ) {
  prefix = "";          parent_key = "'$prefix'";
} else {
  prefix = root_prefix; parent_key = keys[indent-1];
}

The parent_key is the key at the indent level above the current line's indent level and represents the collection that the current line is part of. The collection's key/value pairs will be stored in an array with its name defined as the concatenation of the prefix and parent_key.

For the top level (indent level zero) the data set prefix is used as the parent key so it has no prefix (it's set to ""). All other arrays are prefixed with the root prefix.

Next, the current key is inserted into an (awk-internal) array containing the keys. This array persists throughout the whole awk session and therefore contains keys inserted by prior lines. The key is inserted into the array using its indent as the array index.

keys[indent] = key;

Because this array contains keys from previous lines, any keys with an indent level grater than the current line's indent level are removed:

 for (i in keys) {if (i > indent) {delete keys[i]}}

This leaves the keys array containing the key-chain from the root at indent level 0 to the current line. It removes stale keys that remain when the prior line was indented deeper than the current line.

The final section outputs the bash commands: an input line without a value starts a new indent level (a collection in YAML parlance) and an input line with a value adds a key to the current collection.

The collection's name is the concatenation of the current line's prefix and parent_key.

When a key has a value, a key with that value is assigned to the current collection like this:

printf("%s%s[%s]=\"%s\";\n", prefix, parent_key , key, value);
printf("%s%s[keys]+=\" %s\";\n", prefix, parent_key , key);

The first statement outputs the command to assign the value to an associative array element named after the key and the second one outputs the command to add the key to the collection's space-delimited keys list:

<current_collection>[<key>]="<value>";
<current_collection>[keys]+=" <key>";

When a key doesn't have a value, a new collection is started like this:

printf("%s%s[children]+=\" %s%s\";\n", prefix, parent_key , root_prefix, key);
printf("declare -g -A %s%s;\n", root_prefix, key);

The first statement outputs the command to add the new collection to the current's collection's space-delimited children list and the second one outputs the command to declare a new associative array for the new collection:

<current_collection>[children]+=" <new_collection>"
declare -g -A <new_collection>;

All of the output from yay_parse can be parsed as bash commands by the bash eval or source built-in commands.

You can use ng-bind-html, don't forget to inject $sanitize service into your module Hope it helps

Web Developers use javascript:void(0) because it is the easiest way to prevent the default behavior of a tag. void(*anything*) returns undefined and it is a falsy value. and returning a falsy value is like return false in onclick event of a tag that prevents its default behavior.

So I think javascript:void(0) is the simplest way to prevent the default behavior of a tag.

This worked for me:

foreach (var item in FirmNameList){
    if (FirmNames != "")
    {
        FirmNames += ",\r\n"
    }

    FirmNames += item;
}

For Python 2.6 and later if you are dealing with bytes then a bytearray is the most obvious choice:

>>> str(bytearray([17, 24, 121, 1, 12, 222, 34, 76]))
'\x11\x18y\x01\x0c\xde"L'

To me this is even more direct than Alex Martelli's answer - still no string manipulation or len call but now you don't even need to import anything!

Avoid using

RETURN

statement when you are using

BEGIN TRY
    ... 
END TRY

BEGIN CATCH
    ...
END CATCH

and

BEGIN, COMMIT & ROLLBACK

statements in SQL stored procedures

The properties on the style object are only the styles applied directly to the element (e.g., via a style attribute or in code). So .style.marginTop will only have something in it if you have something specifically assigned to that element (not assigned via a style sheet, etc.).

To get the current calculated style of the object, you use either the currentStyle property (Microsoft) or the getComputedStyle function (pretty much everyone else).

Example:

var p = document.getElementById("target");
var style = p.currentStyle || window.getComputedStyle(p);

display("Current marginTop: " + style.marginTop);

Fair warning: What you get back may not be in pixels. For instance, if I run the above on a p element in IE9, I get back "1em".

Live Copy | Source

If your class2 looks like this having static members

public class2
{
    static int var = 1;

    public static void myMethod()
    {
      // some code

    }
}

Then you can simply call them like

class2.myMethod();
class2.var = 1;

If you want to access non-static members then you would have to instantiate an object.

class2 object = new class2();
object.myMethod();  // non static method
object.var = 1;     // non static variable

It seems to me that the answer to this question is (at least now) clearly documented on the Safari HTML5 docs:

User Control of Downloads Over Cellular Networks

In Safari on iOS (for all devices, including iPad), where the user may be on a cellular network and be charged per data unit, preload and autoplay are disabled. No data is loaded until the user initiates it. This means the JavaScript play() and load() methods are also inactive until the user initiates playback, unless the play() or load() method is triggered by user action. In other words, a user-initiated Play button works, but an onLoad="play()" event does not.

This plays the movie: <input type="button" value="Play" onClick="document.myMovie.play()">

This does nothing on iOS: <body onLoad="document.myMovie.play()">

In Java size of array is fixed , but you can add elements dynamically to a fixed sized array using its index and for loop. Please find example below.

package simplejava;

import java.util.Arrays;

/**
 *
 * @author sashant
 */
public class SimpleJava {

    /**
     * @param args the command line arguments
     */
    public static void main(String[] args) {
        // TODO code application logic here

        try{
            String[] transactions;
            transactions = new String[10];

            for(int i = 0; i < transactions.length; i++){
                transactions[i] = "transaction - "+Integer.toString(i);            
            }

            System.out.println(Arrays.toString(transactions));

        }catch(Exception exc){
            System.out.println(exc.getMessage());
            System.out.println(Arrays.toString(exc.getStackTrace()));
        }
    }

}

If you know you will want all the matches, you could use the re.findall function. It will return a list of all the matches. Then you can just do len(result) for the number of matches.

It's all about variable scoping. Variables declared in the self executing function are, by default, only available to code within the self executing function. This allows code to be written without concern of how variables are named in other blocks of JavaScript code.

For example, as mentioned in a comment by Alexander:

(function() {_x000D_
  var foo = 3;_x000D_
  console.log(foo);_x000D_
})();_x000D_
_x000D_
console.log(foo);

This will first log 3 and then throw an error on the next console.log because foo is not defined.

If you want to see the default browser errors being displayed, for example, those triggered by HTML attributes (showing up before any client-code JS treatment):

<input name="o" required="required" aria-required="true" type="text">

You should use the submit event instead of the click event. In this case a popup will be automatically displayed requesting "Please fill out this field". Even with preventDefault:

$('form').on('submit', function(event) {
   event.preventDefault();
   my_form_treatment(this, event);
}); // -> this will show up a "Please fill out this field" pop-up before my_form_treatment

As someone mentioned previously, return false would stop propagation (i.e. if there are more handlers attached to the form submission, they would not be executed), but, in this case, the action triggered by the browser will always execute first. Even with a return false at the end.

So if you want to get rid of these default pop-ups, use the click event on the submit button:

$('form input[type=submit]').on('click', function(event) {
   event.preventDefault();
   my_form_treatment(this, event);
}); // -> this will NOT show any popups related to HTML attributes

DWORD is not a C++ type, it's defined in <windows.h>.

The reason is that DWORD has a specific range and format Windows functions rely on, so if you require that specific range use that type. (Or as they say "When in Rome, do as the Romans do.") For you, that happens to correspond to unsigned int, but that might not always be the case. To be safe, use DWORD when a DWORD is expected, regardless of what it may actually be.

For example, if they ever changed the range or format of unsigned int they could use a different type to underly DWORD to keep the same requirements, and all code using DWORD would be none-the-wiser. (Likewise, they could decide DWORD needs to be unsigned long long, change it, and all code using DWORD would be none-the-wiser.)

Also note unsigned int does not necessary have the range 0 to 4,294,967,295. See here.

You can cast ints in Perl:

int(5/1.5) = 3;

The cut command is designed for this exact situation. It will "cut" on any delimiter and then you can specify which chunks should be output.

For instance: echo "foo bar <foo> bla 1 2 3.4" | cut -d " " -f 6-7

Will result in output of: 2 3.4

-d sets the delimiter

-f selects the range of 'fields' to output, in this case, it's the 6th through 7th chunks of the original string. You can also specify the range as a list, such as 6,7.

If you knew the Class of ImplementationType you could create an instance of it. So what you are trying to do is not possible.

Try inheriting from ConfigurationSection. This blog post by Phil Haack has an example.

Confirmed, per the documentation for IConfigurationSectionHandler:

In .NET Framework version 2.0 and above, you must instead derive from the ConfigurationSection class to implement the related configuration section handler.

The chosen answer does work however I wanted to make a comment that having 'ngModel' on the html tag causes the checkbox checked to not be set to true.

This occurs when you are trying to do bind using the checked property. i.e.

<mat-checkbox [checked]='var' ngModel name='some_name'></mat-checkbox>

And then inside your app.component.ts file

var = true;

will not work.

TLDR: Remove ngModel if you are setting the checked through the [checked] property

    <mat-checkbox [checked]='var' name='some_name'></mat-checkbox>

You would use data validation for this. Click in the cell you want to have a multiple drop down > DATA > Validation > Criteria (List from a Range) - here you select form a list of items you want in the drop down. And .. you are good. I have included an example to reference.

Joining elements in a list space separated:

word = ["test", "crust", "must", "fest"]
word.reverse()
joined_string = ""
for w in word:
   joined_string = w + joined_string + " "
print(joined_string.rstrim())

Here's the list of all Win32 error codes. You can use this page to lookup the error code mentioned in IIS logs:
http://msdn.microsoft.com/en-us/library/ms681381.aspx

You can also use command line utility net to find information about a Win32 error code. The syntax would be:
net helpmsg Win32_Status_Code

In your css add folllowing

[ng\:cloak], [ng-cloak], [data-ng-cloak], [x-ng-cloak], .ng-cloak, .x-ng-cloak {
    display: none !important;
 }

And then in you code you can add ng-cloak directive. For example,

<div ng-cloak>
   Welcome {{data.name}}
</div>

Thats it!

1. Go to XCode > Preferences > Fonts & Color
2. Double click on a font entry to get the Font inspector window
3. Select all font entries with sizes you'd like to increase/decrease
4. In the Font inspector window select the same font (e.g. All Fonts > Menlo > Regular > 14)

Watch out because there's no undo!

return (i & -i) == i

java android

in my case

I want to change from

~/propic/........png

anything after /propic/ doesn't matter what before it

........png

finally, I found the code in Class StringUtils

this is the code

     public static String substringAfter(final String str, final String separator) {
         if (isEmpty(str)) {
             return str;
         }
         if (separator == null) {
             return "";
         }
         final int pos = str.indexOf(separator);
         if (pos == 0) {
             return str;
         }
         return str.substring(pos + separator.length());
     }

Fuel UX combobox has all the features you would expect.

It depends on what you want to do with the script (or any other program you want to run).

If you just want to run the script system is the easiest thing to do, but it does some other stuff too, including running a shell and having it run the command (/bin/sh under most *nix).

If you want to either feed the shell script via its standard input or consume its standard output you can use popen (and pclose) to set up a pipe. This also uses the shell (/bin/sh under most *nix) to run the command.

Both of these are library functions that do a lot under the hood, but if they don't meet your needs (or you just want to experiment and learn) you can also use system calls directly. This also allows you do avoid having the shell (/bin/sh) run your command for you.

The system calls of interest are fork, execve, and waitpid. You may want to use one of the library wrappers around execve (type man 3 exec for a list of them). You may also want to use one of the other wait functions (man 2 wait has them all). Additionally you may be interested in the system calls clone and vfork which are related to fork.

fork duplicates the current program, where the only main difference is that the new process gets 0 returned from the call to fork. The parent process gets the new process's process id (or an error) returned.

execve replaces the current program with a new program (keeping the same process id).

waitpid is used by a parent process to wait on a particular child process to finish.

Having the fork and execve steps separate allows programs to do some setup for the new process before it is created (without messing up itself). These include changing standard input, output, and stderr to be different files than the parent process used, changing the user or group of the process, closing files that the child won't need, changing the session, or changing the environmental variables.

You may also be interested in the pipe and dup2 system calls. pipe creates a pipe (with both an input and an output file descriptor). dup2 duplicates a file descriptor as a specific file descriptor (dup is similar but duplicates a file descriptor to the lowest available file descriptor).

Run the following command to retrieve the SHA256 fingerprint of your SSH key (-l means "list" instead of create a new key, -f means "filename"):

$ ssh-keygen -lf /path/to/ssh/key

So for example, on my machine the command I ran was (using RSA public key):

$ ssh-keygen -lf ~/.ssh/id_rsa.pub
2048 00:11:22:33:44:55:66:77:88:99:aa:bb:cc:dd:ee:ff /Users/username/.ssh/id_rsa.pub (RSA)

To get the GitHub (MD5) fingerprint format with newer versions of ssh-keygen, run:

$ ssh-keygen -E md5 -lf <fileName>

Bonus information:

ssh-keygen -lf also works on known_hosts and authorized_keys files.

To find most public keys on Linux/Unix/OS X systems, run

$ find /etc/ssh /home/*/.ssh /Users/*/.ssh -name '*.pub' -o -name 'authorized_keys' -o -name 'known_hosts'

(If you want to see inside other users' homedirs, you'll have to be root or sudo.)

The ssh-add -l is very similar, but lists the fingerprints of keys added to your agent. (OS X users take note that magic passwordless SSH via Keychain is not the same as using ssh-agent.)

Aergistal's answer works, but I found that converting to mp4 can make some m3u8 videos broken. If you are stuck with this problem, try to convert them to mkv, and convert them to mp4 later.

You could achieve this without having to import traceback:

try:
    func1()
except Exception as ex:
    trace = []
    tb = ex.__traceback__
    while tb is not None:
        trace.append({
            "filename": tb.tb_frame.f_code.co_filename,
            "name": tb.tb_frame.f_code.co_name,
            "lineno": tb.tb_lineno
        })
        tb = tb.tb_next
    print(str({
        'type': type(ex).__name__,
        'message': str(ex),
        'trace': trace
    }))

Output:

{

  'type': 'ZeroDivisionError',
  'message': 'division by zero',
  'trace': [
    {
      'filename': '/var/playground/main.py',
      'name': '<module>',
      'lineno': 16
    },
    {
      'filename': '/var/playground/main.py',
      'name': 'func1',
      'lineno': 11
    },
    {
      'filename': '/var/playground/main.py',
      'name': 'func2',
      'lineno': 7
    },
    {
      'filename': '/var/playground/my.py',
      'name': 'test',
      'lineno': 2
    }
  ]
}

You can change the actual width/height attributes like this:

var theImg = document.getElementById('theImgId');
theImg.height = 150;
theImg.width = 150;

First you need to export HTTP_PROXY. Second, you need to read man sudo carefully, and pay attention to the -E flag. This works:

$ export HTTP_PROXY=foof
$ sudo -E bash -c 'echo $HTTP_PROXY'

Here is the quote from the man page:

-E, --preserve-env
             Indicates to the security policy that the user wishes to preserve their
             existing environment variables.  The security policy may return an error
             if the user does not have permission to preserve the environment.

And here's my final version.

public static class MyWpfExtensions
{
    public static System.Windows.Forms.IWin32Window GetIWin32Window(this System.Windows.Media.Visual visual)
    {
        var source = System.Windows.PresentationSource.FromVisual(visual) as System.Windows.Interop.HwndSource;
        System.Windows.Forms.IWin32Window win = new OldWindow(source.Handle);
        return win;
    }

    private class OldWindow : System.Windows.Forms.IWin32Window
    {
        private readonly System.IntPtr _handle;
        public OldWindow(System.IntPtr handle)
        {
            _handle = handle;
        }

        #region IWin32Window Members
        System.IntPtr System.Windows.Forms.IWin32Window.Handle
        {
            get { return _handle; }
        }
        #endregion
    }
}

And to actually use it:

var dlg = new FolderBrowserDialog();
System.Windows.Forms.DialogResult result = dlg.ShowDialog(this.GetIWin32Window());

ser.read(64) should be ser.read(size=64); ser.read uses keyword arguments, not positional.

Also, you're reading from the port twice; what you probably want to do is this:

i=0
for modem in PortList:
    for port in modem:
        try:
            ser = serial.Serial(port, 9600, timeout=1)
            ser.close()
            ser.open()
            ser.write("ati")
            time.sleep(3)
            read_val = ser.read(size=64)
            print read_val
            if read_val is not '':
                print port
        except serial.SerialException:
            continue
        i+=1

Now that you have provided your HTML sample, we're able to see that your XPath is slightly wrong. While it's valid XPath, it's logically wrong.

You've got:

//*[contains(@id, 'ctl00_btnAircraftMapCell')]//*[contains(@title, 'Select Seat')]

Which translates into:

Get me all the elements that have an ID that contains ctl00_btnAircraftMapCell. Out of these elements, get any child elements that have a title that contains Select Seat.

What you actually want is:

//a[contains(@id, 'ctl00_btnAircraftMapCell') and contains(@title, 'Select Seat')]

Which translates into:

Get me all the anchor elements that have both: an id that contains ctl00_btnAircraftMapCell and a title that contains Select Seat.

Just to swim upstream, static members and classes do not participate in OO and are therefore evil. No, not evil, but seriously, I would recommend a regular class with a singleton pattern for access. This way if you need to override behavior in any cases down the road, it isn't a major retooling. OO is your friend :-)

My $.02

Knowing how to write a preset dictionary is useful to know as well:

cmap =  {'US':'USA','GB':'Great Britain'}

# Explicitly:
# -----------
def cxlate(country):
    try:
        ret = cmap[country]
    except KeyError:
        ret = '?'
    return ret

present = 'US' # this one is in the dict
missing = 'RU' # this one is not

print cxlate(present) # == USA
print cxlate(missing) # == ?

# or, much more simply as suggested below:

print cmap.get(present,'?') # == USA
print cmap.get(missing,'?') # == ?

# with country codes, you might prefer to return the original on failure:

print cmap.get(present,present) # == USA
print cmap.get(missing,missing) # == RU

String upToNCharacters = String.format("%."+ n +"s", str);

Awful if n is a variable (so you must construct the format string), but pretty clear if a constant:

String upToNCharacters = String.format("%.10s", str);

docs

Ideally you would put that in a directive, but you can also just put it in the controller. http://jsfiddle.net/tnq86/15/

  angular.module('App', [])
    .controller('AppCtrl', function ($scope) {

      $scope.model = 0;

      $scope.initSlider = function () {
          $(function () {
            // wait till load event fires so all resources are available
              $scope.$slider = $('#slider').slider({
                  slide: $scope.onSlide
              });
          });

          $scope.onSlide = function (e, ui) {
             $scope.model = ui.value;
             $scope.$digest();
          };
      };

      $scope.initSlider();
  });

The directive approach:

HTML

<div slider></div>

JS

  angular.module('App', [])
    .directive('slider', function (DataModel) {
      return {
         restrict: 'A',
         scope: true,
         controller: function ($scope, $element, $attrs) {
            $scope.onSlide = function (e, ui) {
              $scope.model = ui.value;
              // or set it on the model
              // DataModel.model = ui.value;
              // add to angular digest cycle
              $scope.$digest();
            };
         },
         link: function (scope, el, attrs) {

            var options = {
              slide: scope.onSlide  
            };

            // set up slider on load
            angular.element(document).ready(function () {
              scope.$slider = $(el).slider(options);
            });
         }
      }
  });

I would also recommend checking out Angular Bootstrap's source code: https://github.com/angular-ui/bootstrap/blob/master/src/tooltip/tooltip.js

You can also use a factory to create the directive. This gives you ultimate flexibility to integrate services around it and whatever dependencies you need.

I have a cool one, facebook created a automated tool for rewriting PHP code. They parse the source into an abstract syntax tree, do some transformations:

if ($f == false) -> if (false == $f)

I don't know why, but that seems to be their particular style and then they pretty print it.

https://github.com/facebook/lex-pass

We use haskell for making small domain specific languages. Huge amounts of data processing. Web development. Web spiders. Testing applications. Writing system administration scripts. Backend scripts, which communicate with other parties. Monitoring scripts (we have a DSL which works nicely together with munin, makes it much easier to write correct monitor code for your applications.)

All kind of stuff actually. It is just a everyday general purpose language with some very powerful and useful features, if you are somewhat mathematically inclined.

The line (or lines) between the lines beginning <<<<<<< and ====== here:

<<<<<<< HEAD:file.txt
Hello world
=======

... is what you already had locally - you can tell because HEAD points to your current branch or commit. The line (or lines) between the lines beginning ======= and >>>>>>>:

=======
Goodbye
>>>>>>> 77976da35a11db4580b80ae27e8d65caf5208086:file.txt

... is what was introduced by the other (pulled) commit, in this case 77976da35a11. That is the object name (or "hash", "SHA1sum", etc.) of the commit that was merged into HEAD. All objects in git, whether they're commits (version), blobs (files), trees (directories) or tags have such an object name, which identifies them uniquely based on their content.

private void txt_invoice_KeyDown(object sender, KeyEventArgs e)
    {
        if (e.KeyCode == Keys.Enter)
            txt_date.Focus();
    }

    private void txt_date_KeyDown(object sender, KeyEventArgs e)
    {
        if (e.KeyCode == Keys.Enter)
            txt_patientname.Focus();
    }

}

In my case over time I had saved a bunch of versions of myfile as myfile_bak, myfile_old, myfile_2010, backups/myfile etc. I wanted to put myfile's history in git using their modification dates. So rename the oldest to myfile, git add myfile, then git commit --date=(modification date from ls -l) myfile, rename next oldest to myfile, another git commit with --date, repeat...

To automate this somewhat, you can use shell-foo to get the modification time of the file. I started with ls -l and cut, but stat(1) is more direct

git commit --date="`stat -c %y myfile`" myfile

All the hidden fields in your fieldset are using the same id, so jquery is only returning the first one. One way to fix this is to create a counter variable and concatenate it to each hidden field id.

I test every way, But only working way was re Installing sdk-manager in same path as old one

Source

Availability to instance methods

• Class instance variables are available only to class methods and not to instance methods.
• Class variables are available to both instance methods and class methods.

Inheritability

• Class instance variables are lost in the inheritance chain.
• Class variables are not.

class Vars

  @class_ins_var = "class instance variable value"  #class instance variable
  @@class_var = "class variable value" #class  variable

  def self.class_method
    puts @class_ins_var
    puts @@class_var
  end

  def instance_method
    puts @class_ins_var
    puts @@class_var
  end
end

Vars.class_method

puts "see the difference"

obj = Vars.new

obj.instance_method

class VarsChild < Vars


end

VarsChild.class_method

If you want to move from c:\ and you want to go to c:\Documents and settings, write on console: c:\Documents\[space]+tab and cygwin will autocomplete it as c:\Documents\ and\ settings/

A better way is to use the Stopwatch class:

using System.Diagnostics;
// ...

Stopwatch sw = new Stopwatch();

sw.Start();

// ...

sw.Stop();

Console.WriteLine("Elapsed={0}",sw.Elapsed);

Also, you could try to use ndarray.item(), for example, arr.item((0, 0))(rowid+colid to index) or arr.item(0)(flatten index), its doc https://docs.scipy.org/doc/numpy/reference/generated/numpy.ndarray.item.html

You can use the Class XmlAttribute.

Eg:

XmlAttribute attr = xmlDoc.CreateAttribute("userName");
attr.Value = "Tushar";

node.Attributes.Append(attr);

Add below event to DateTimePicker

Private Sub DateTimePicker1_KeyPress(sender As Object, e As KeyPressEventArgs) Handles DateTimePicker1.KeyPress
    e.Handled = True
End Sub

(Swift 3) Add text box and uipickerview to the storyboard then add delegate and data source to uipickerview and add delegate to textbox. Follow video for assistance https://youtu.be/SfjZwgxlwcc

import UIKit

class ViewController: UIViewController, UIPickerViewDelegate, UIPickerViewDataSource, UITextFieldDelegate {

    @IBOutlet weak var textBox: UITextField!
    @IBOutlet weak var dropDown: UIPickerView!

    var list = ["1", "2", "3"]

    public func numberOfComponents(in pickerView: UIPickerView) -> Int{
        return 1
    }

    public func pickerView(_ pickerView: UIPickerView, numberOfRowsInComponent component: Int) -> Int{

        return list.count
    }

    func pickerView(_ pickerView: UIPickerView, titleForRow row: Int, forComponent component: Int) -> String? {

        self.view.endEditing(true)
        return list[row]
    }

    func pickerView(_ pickerView: UIPickerView, didSelectRow row: Int, inComponent component: Int) {

        self.textBox.text = self.list[row]
        self.dropDown.isHidden = true
    }

    func textFieldDidBeginEditing(_ textField: UITextField) {

        if textField == self.textBox {
            self.dropDown.isHidden = false
            //if you don't want the users to se the keyboard type:

            textField.endEditing(true)
        }
    }
}

After you run Lint in Android Studio and find all the unused resources, you can click on one of them from the Inspection tab. It provides some detail about the issue and a few options to fix it. One of them is Remove All Unused Resources. Selecting that option deletes all the unused resources.

I wasn't using Azure, but I got the same error locally. Using <customErrors mode="Off" /> seemed to have no effect, but checking the Application logs in Event Viewer revealed a warning from ASP.NET which contained all the detail I needed to resolve the issue.

Accepts / Matches only ASCII characters

/^[\x00-\x7F]*$/

To answer the original question: yes, you can access the index value of a row in apply(). It is available under the key name and requires that you specify axis=1 (because the lambda processes the columns of a row and not the rows of a column).

Working example (pandas 0.23.4):

>>> import pandas as pd
>>> df = pd.DataFrame([[1,2,3],[4,5,6]], columns=['a','b','c'])
>>> df.set_index('a', inplace=True)
>>> df
   b  c
a      
1  2  3
4  5  6
>>> df['index_x10'] = df.apply(lambda row: 10*row.name, axis=1)
>>> df
   b  c  index_x10
a                 
1  2  3         10
4  5  6         40

If you have not pushed the changes already:

git rm -r --cached .
git add .
git commit -m 'clear git cache'
git push

Lot of good tips here, but inside Powershell I could not get it to work.

I am a .NET developer and we mainly still use Windows OS as we haven't made use of .Net core and cross platform so much, so my everyday use with Git is in a Windows environment, where the shell used is more often Powershell and not Git bash.

The following procedure can be followed to create an aliased function for adding untracked files in a Git repository.

Inside your $profile file of Powershell (in case it is missing - you can run: New-Item $Profile)

notepad $Profile

Now add this Powershell method:

function AddUntracked-Git() {
 &git ls-files -o --exclude-standard | select | foreach { git add $_ }
}

Save the $profile file and reload it into Powershell. Then reload your $profile file with: . $profile

This is similar to the source command in *nix environments IMHO.

So next time you, if you are developer using Powershell in Windows against Git repo and want to just include untracked files you can run:

AddUntracked-Git

This follows the Powershell convention where you have verb-nouns.

This answer is not working since the urllib2 module has been split across several modules in Python 3. You need to do

from urllib import request
opener = request.build_opener()
opener.addheaders.append(('Cookie', 'cookiename=cookievalue'))
f = opener.open("http://example.com/")

I got it to work by doing this, assuming you are using PDO.

//Place query here, let's say you want all the users that have blue as their favorite color
$sql = "SELECT name FROM user WHERE favorite_color = :color";

//set parameters 
//you may set as many parameters as you have on your query
$params['color'] = blue;


//create the prepared statement, by getting the doctrine connection
$stmt = $this->entityManager->getConnection()->prepare($sql);
$stmt->execute($params);
//I used FETCH_COLUMN because I only needed one Column.
return $stmt->fetchAll(PDO::FETCH_COLUMN);

You can change the FETCH_TYPE to suit your needs.

the problem is in flow annotation in handleClick, i removed this and works fine thanks @alik

you can try this indside findall for loop:

item_price = item.find('span', attrs={'class':'s-item__price'}).text

it extracts only text and assigs it to "item_pice"

I've found this answer in the site https://plainjs.com/javascript/styles/set-and-get-css-styles-of-elements-53/.

In this code we add multiple styles in an element:

let_x000D_
    element = document.querySelector('span')_x000D_
  , cssStyle = (el, styles) => {_x000D_
      for (var property in styles) {_x000D_
          el.style[property] = styles[property];_x000D_
      }_x000D_
  }_x000D_
;_x000D_
_x000D_
cssStyle(element, { background:'tomato', color: 'white', padding: '0.5rem 1rem'});

span{_x000D_
font-family: sans-serif;_x000D_
color: #323232;_x000D_
background: #fff;_x000D_
}

<span>_x000D_
lorem ipsum_x000D_
</span>

Sure there is! For instance:

<xsl:if test="not(contains($hhref, '1234'))">
  <li>
    <a href="{$hhref}" title="{$pdate}">
      <xsl:value-of select="title"/>
    </a>
  </li>
</xsl:if>

The syntax is: contains(stringToSearchWithin, stringToSearchFor)

Maybe this can help :)

Controller

$scope.scrollevent = function($e){
   // Your code
}

Html

<div scroll scroll-event="scrollevent">//scrollable content</div>

Or

<body scroll scroll-event="scrollevent">//scrollable content</body>

Directive

.directive("scroll", function ($window) {
   return {
      scope: {
         scrollEvent: '&'
      },
      link : function(scope, element, attrs) {
        $("#"+attrs.id).scroll(function($e) { scope.scrollEvent != null ?  scope.scrollEvent()($e) : null })
      }
   }
})

double num = 5;

That avoids a cast. But you'll find that the cast conversions are well-defined. You don't have to guess, just check the JLS. int to double is a widening conversion. From §5.1.2:

Widening primitive conversions do not lose information about the overall magnitude of a numeric value.

[...]

Conversion of an int or a long value to float, or of a long value to double, may result in loss of precision-that is, the result may lose some of the least significant bits of the value. In this case, the resulting floating-point value will be a correctly rounded version of the integer value, using IEEE 754 round-to-nearest mode (§4.2.4).

5 can be expressed exactly as a double.

Finally I imported my Gradle project. These are the steps:

1. I switched from local Gradle distrib to Intellij Idea Gradle Wrapper (gradle-2.14).
2. I pointed system variable JAVA_HOME to JDK 8 (it was 7th previously) as I had figured out by experiments that Gradle Wrapper could process the project with JDK 8 only.
3. I deleted previously manually created file gradle.properties (with org.gradle.java.homevariable) in windows user .gradle directory as, I guessed, it didn't bring any additional value to Gradle.

<input type="text" name="field" maxlength="8"
    onkeypress="return onlyAlphabets(event,this);" />

function onlyAlphabets(e, t) {
            try {
                if (window.event) {
                    var charCode = window.event.keyCode;
                }
                else if (e) {
                    var charCode = e.which;
                }
                else { return true; }
                if ((charCode > 64 && charCode < 91) || (charCode > 96 && charCode < 123))
                    return true;
                else
                    return false;
            }
            catch (err) {
                alert(err.Description);
            }
        }

This returns max heap size in bytes:

Runtime.getRuntime().maxMemory()

I was using ActivityManager.getMemoryClass() but on CyanogenMod 7 (I didn't test it elsewhere) it returns wrong value if the user sets heap size manually.

Besides put all your assets in the public folder, you can use the HTML::image() Method, and only needs an argument which is the path to the image, relative on the public folder, as well:

{{ HTML::image('imgs/picture.jpg') }}

Which generates the follow HTML code:

<img src="http://localhost:8000/imgs/picture.jpg">

The link to other elements of HTML::image() Method: http://laravel-recipes.com/recipes/185/generating-an-html-image-element

You have several options depending on what you're looking for. Workbook.Path returns the path of a saved workbook. Application.Path returns the path to the Excel executable. CurDir returns the current working path, this probably defaults to your My Documents folder or similar.

You can also use the windows scripting shell object's .CurrentDirectory property.

Set wshell = CreateObject("WScript.Shell")
Debug.Print wshell.CurrentDirectory

But that should get the same result as just

Debug.Print CurDir

In python, this concatenates with blank lines between files (the , suppresses adding an extra trailing blank line):

print '\n'.join(open(f).read() for f in filenames),

Here is the ugly python one-liner that can be called from the shell and prints the output to a file:

python -c "from sys import argv; print '\n'.join(open(f).read() for f in argv[1:])," File*.txt > finalfile.txt

There is a generic solution:

Lets say you have a controller named Admin where you put content for authorized users.

Then, you can override the Initialize or OnAuthorization methods of Admin controller and write redirect to login page logic on session timeout in these methods as described:

protected override void OnAuthorization(System.Web.Mvc.AuthorizationContext filterContext)
    {
        //lets say you set session value to a positive integer
        AdminLoginType = Convert.ToInt32(filterContext.HttpContext.Session["AdminLoginType"]);
        if (AdminLoginType == 0)
        {
            filterContext.HttpContext.Response.Redirect("~/login");
        }

        base.OnAuthorization(filterContext);
    }

Try with this:

<android.support.v4.widget.DrawerLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:id="@+id/drawer_layout"
android:fitsSystemWindows="true">


<FrameLayout
    android:layout_width="match_parent"
    android:layout_height="match_parent">

    <!--Main layout and ads-->
    <LinearLayout
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        android:orientation="vertical">

        <FrameLayout
            android:id="@+id/ll_main_hero"
            android:layout_width="match_parent"
            android:layout_height="0dp"
            android:layout_weight="1">

        </FrameLayout>

        <FrameLayout
            android:id="@+id/ll_ads"
            android:layout_width="match_parent"
            android:layout_height="wrap_content">

            <View
                android:layout_width="320dp"
                android:layout_height="50dp"
                android:layout_gravity="center"
                android:background="#ff00ff" />
        </FrameLayout>


    </LinearLayout>

    <!--Toolbar-->
    <android.support.v7.widget.Toolbar
        android:layout_width="match_parent"
        android:layout_height="wrap_content"
        android:id="@+id/toolbar"
        android:elevation="4dp" />
</FrameLayout>


<!--left-->
<ListView
    android:layout_width="240dp"
    android:layout_height="match_parent"
    android:layout_gravity="start"
    android:choiceMode="singleChoice"
    android:divider="@null"
    android:background="@mipmap/layer_image"
    android:id="@+id/left_drawer"></ListView>

<!--right-->
<FrameLayout
    android:layout_width="240dp"
    android:layout_height="match_parent"
    android:layout_gravity="right"
    android:background="@mipmap/layer_image">

    <ImageView
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        android:src="@mipmap/ken2"
        android:scaleType="centerCrop" />
</FrameLayout>

style :

<style name="ts_theme_overlay" parent="Theme.AppCompat.Light.NoActionBar">
    <item name="colorPrimary">@color/red_A700</item>
    <item name="colorPrimaryDark">@color/red1</item>
    <item name="android:windowBackground">@color/blue_A400</item>
</style>

Main Activity extends ActionBarActivity

toolBar = (Toolbar) findViewById(R.id.toolbar);
    setSupportActionBar(toolBar);

Now you can onCreateOptionsMenu like as normal ActionBar with ToolBar.

This is my Layout

• TOP: Left Drawer - Right Drawer
  • MID: ToolBar (ActionBar)
  • BOTTOM: ListFragment

Hope you understand !have fun !