you can get ip of that computer runs server program from DHCP list in that router you connected to.
By using the ROW()
function I can drag this formula vertically. It can also be dragged horizontally since there is no $
before the D
.
= INDIRECT("'"&D$2&"'!$B"&ROW())
My layout has sheet names as column headers (B2
, C2
, D2
, etc.) and maps multiple row values from Column B
in each sheet.
Or you can create an empty link at the end of your <li>
:
<a href="link"></a>
.menu li{position:relative;padding:0;}
.link{
bottom: 0;
left: 0;
position: absolute;
right: 0;
top: 0;
}
This will create a full clickable <li>
and keep your formatting on your real link.
It could be useful for <div>
tag as well
I'm not sure if this will work exactly, but I thought of
var docwrite = function(doc) {
document.write(doc);
};
This solved the problem with the error messages for me.
I think you are looking for ToText(CCur(@Price}/{ValuationReport.YestPrice}*100-100))
You can use CCur
to convert numbers or string to Curency formats. CCur(number)
or CCur(string)
I think this may be what you are looking for,
Replace (ToText(CCur({field})),"$" , "")
that will give the parentheses for negative numbers
It is a little hacky, but I'm not sure CR is very kind in the ways of formatting
You can reference Microsoft.VisualBasic.dll
.
Then using the code below.
Microsoft.VisualBasic.Interaction.InputBox("Question?","Title","Default Text");
Alternatively, by adding a using
directive allowing for a shorter syntax in your code (which I'd personally prefer).
using Microsoft.VisualBasic;
...
Interaction.InputBox("Question?","Title","Default Text");
Or you can do what Pranay Rana suggests, that's what I would've done too...
Swift 3
let indexpath = NSIndexPath(row: 0, section: 0)
let currentCell = tableView.cellForRow(at: indexpath as IndexPath)!
The executable used to run batch scripts is cmd.exe
which uses the /c
flag to specify the name of the batch file to run:
Runtime.getRuntime().exec(new String[]{"cmd.exe", "/c", "build.bat"});
Theoretically you should also be able to run Scons in this manner, though I haven't tested this:
Runtime.getRuntime().exec(new String[]{"scons", "-Q", "implicit-deps-changed", "build\file_load_type", "export\file_load_type"});
EDIT: Amara, you say that this isn't working. The error you listed is the error you'd get when running Java from a Cygwin terminal on a Windows box; is this what you're doing? The problem with that is that Windows and Cygwin have different paths, so the Windows version of Java won't find the scons executable on your Cygwin path. I can explain further if this turns out to be your problem.
There is better way. I'm using it in pages where I'm using kendo angularJS directives and grids has'nt IDs...
change: function (e) {
var selectedDataItem = e != null ? e.sender.dataItem(e.sender.select()) : null;
}
Try this one in your controller, in the same order:
$scope.typeOptions = [
{ name: 'Feature', value: 'feature' },
{ name: 'Bug', value: 'bug' },
{ name: 'Enhancement', value: 'enhancement' }
];
$scope.form.type = $scope.typeOptions[0];
The Java Generics FAQ and therefore also cletus' answer sound like there is no point in having Class<List<T>>
, however the real problem is that this is extremely dangerous:
@SuppressWarnings("unchecked")
Class<List<String>> stringListClass = (Class<List<String>>) (Class<?>) List.class;
List<Integer> intList = new ArrayList<>();
intList.add(1);
List<String> stringList = stringListClass.cast(intList);
// Surprise!
String firstElement = stringList.get(0);
The cast()
makes it look as if it is safe, but in reality it is not safe at all.
Though I don't get where there can't be List<?>.class
= Class<List<?>>
since this would be pretty helpful when you have a method which determines the type based on the generic type of a Class
argument.
For getClass()
there is JDK-6184881 requesting to switch to using wildcards, however it does not look like this change will be performed (very soon) since it is not compatible with previous code (see this comment).
I would Poly fill the classList functionality and use the new syntax. This way newer browser will use the new implementation (which is much faster) and only old browsers will take the performance hit from the code.
create table #Temp
(
EventID int,
EventTitle Varchar(50),
EventStartDate DateTime,
EventEndDate DatetIme,
EventEnumDays int,
EventStartTime Datetime,
EventEndTime DateTime,
EventRecurring Bit,
EventType int
)
;WITH Calendar
AS (SELECT /*...*/)
Insert Into #Temp
Select EventID, EventStartDate, EventEndDate, PlannedDate as [EventDates], Cast(PlannedDate As datetime) AS DT, Cast(EventStartTime As time) AS ST,Cast(EventEndTime As time) AS ET, EventTitle
,EventType from Calendar
where (PlannedDate >= GETDATE()) AND ',' + EventEnumDays + ',' like '%,' + cast(datepart(dw, PlannedDate) as char(1)) + ',%'
or EventEnumDays is null
Make sure that the table is deleted after use
If(OBJECT_ID('tempdb..#temp') Is Not Null)
Begin
Drop Table #Temp
End
If the Namespaces are correct then also there is a same error,
Just close your application and open it again.
This may solve your problem
The most common representations are probably these two:
Of these two the adjacency matrix is the simplest, as long as you don't mind having a (possibly huge) n * n
array, where n
is the number of vertices. Depending on the base type of the array, you can even store edge weights for use in e.g. shortest path discovery algorithms.
The issue is with
At the time of writing this, no environment supports ES6 modules natively. When using them in Node.js you need to use something like Babel to convert the modules to CommonJS. But how exactly does that happen?
Many people consider module.exports = ...
to be equivalent to export default ...
and exports.foo ...
to be equivalent to export const foo = ...
. That's not quite true though, or at least not how Babel does it.
ES6 default
exports are actually also named exports, except that default
is a "reserved" name and there is special syntax support for it. Lets have a look how Babel compiles named and default exports:
// input
export const foo = 42;
export default 21;
// output
"use strict";
Object.defineProperty(exports, "__esModule", {
value: true
});
var foo = exports.foo = 42;
exports.default = 21;
Here we can see that the default export becomes a property on the exports
object, just like foo
.
We can import the module in two ways: Either using CommonJS or using ES6 import
syntax.
Your issue: I believe you are doing something like:
var bar = require('./input');
new bar();
expecting that bar
is assigned the value of the default export. But as we can see in the example above, the default export is assigned to the default
property!
So in order to access the default export we actually have to do
var bar = require('./input').default;
If we use ES6 module syntax, namely
import bar from './input';
console.log(bar);
Babel will transform it to
'use strict';
var _input = require('./input');
var _input2 = _interopRequireDefault(_input);
function _interopRequireDefault(obj) { return obj && obj.__esModule ? obj : { default: obj }; }
console.log(_input2.default);
You can see that every access to bar
is converted to access .default
.
Here's some more benchmarks for Docker based memcached server
versus host native memcached server
using Twemperf benchmark tool https://github.com/twitter/twemperf with 5000 connections and 20k connection rate
Connect time overhead for docker based memcached seems to agree with above whitepaper at roughly twice native speed.
Twemperf Docker Memcached
Connection rate: 9817.9 conn/s
Connection time [ms]: avg 341.1 min 73.7 max 396.2 stddev 52.11
Connect time [ms]: avg 55.0 min 1.1 max 103.1 stddev 28.14
Request rate: 83942.7 req/s (0.0 ms/req)
Request size [B]: avg 129.0 min 129.0 max 129.0 stddev 0.00
Response rate: 83942.7 rsp/s (0.0 ms/rsp)
Response size [B]: avg 8.0 min 8.0 max 8.0 stddev 0.00
Response time [ms]: avg 28.6 min 1.2 max 65.0 stddev 0.01
Response time [ms]: p25 24.0 p50 27.0 p75 29.0
Response time [ms]: p95 58.0 p99 62.0 p999 65.0
Twemperf Centmin Mod Memcached
Connection rate: 11419.3 conn/s
Connection time [ms]: avg 200.5 min 0.6 max 263.2 stddev 73.85
Connect time [ms]: avg 26.2 min 0.0 max 53.5 stddev 14.59
Request rate: 114192.6 req/s (0.0 ms/req)
Request size [B]: avg 129.0 min 129.0 max 129.0 stddev 0.00
Response rate: 114192.6 rsp/s (0.0 ms/rsp)
Response size [B]: avg 8.0 min 8.0 max 8.0 stddev 0.00
Response time [ms]: avg 17.4 min 0.0 max 28.8 stddev 0.01
Response time [ms]: p25 12.0 p50 20.0 p75 23.0
Response time [ms]: p95 28.0 p99 28.0 p999 29.0
Here's bencmarks using memtier benchmark tool
memtier_benchmark docker Memcached
4 Threads
50 Connections per thread
10000 Requests per thread
Type Ops/sec Hits/sec Misses/sec Latency KB/sec
------------------------------------------------------------------------
Sets 16821.99 --- --- 1.12600 2271.79
Gets 168035.07 159636.00 8399.07 1.12000 23884.00
Totals 184857.06 159636.00 8399.07 1.12100 26155.79
memtier_benchmark Centmin Mod Memcached
4 Threads
50 Connections per thread
10000 Requests per thread
Type Ops/sec Hits/sec Misses/sec Latency KB/sec
------------------------------------------------------------------------
Sets 28468.13 --- --- 0.62300 3844.59
Gets 284368.51 266547.14 17821.36 0.62200 39964.31
Totals 312836.64 266547.14 17821.36 0.62200 43808.90
The DB_PATH was pointing to different database. Change it in database helper class and my code working.
private static String DB_PATH = "/data/data/com.example.abc";
Log in to one machine
$ scp -r /path/to/top/directory user@server:/path/to/copy
Here is updated Fiddle
Simply remove </br>
between input radio's
<div class="clearBoth"></div>
<input type="radio" name="editList" value="always">Always
<input type="radio" name="editList" value="never">Never
<input type="radio" name="editList" value="costChange">Cost Change
<div class="clearBoth"></div>
Messing around with environment variables or hard-coded parent folder offsets is never a good idea when there is a API to get the info you want, call SHGetSpecialFolderPath(...,CSIDL_PROFILE,...)
You have an ID for each photo so my suggestion is you rename the photo. For example you rename it by the date
<?php
$date = getdate();
$name .= $date[hours];
$name .= $date[minutes];
$name .= $date[seconds];
$name .= $date[year];
$name .= $date[mon];
$name .= $date[mday];
?>
note: don't forget the file extension of your file or you can generate random string for the photo, but I would not recommend that. I would also recommend you to check the file extension before you upload it to your directory.
<?php
if ((($_FILES["photo"]["type"] == "image/jpeg")
|| ($_FILES["photo"]["type"] == "image/pjpg"))
&& ($_FILES["photo"]["size"] < 100000000))
{
move_uploaded_file($_FILES["photo"]["tmp_name"], $target.$name);
if(mysql_query("your query"))
{
//success handling
}
else
{
//failed handling
}
}
else
{
//error handling
}
?>
Hope this might help.
Bugginess* in the new Drupal 8 capabilities here inspired us to write our own:
<a href="{{ view_node }}">{% if title|length > 32 %}{% set title_array = title|split(' ') %}{% set title_word_count = 0 %}{% for ta in title_array %}{% set word_count = ta|length %}{% if title_word_count < 32 %}{% set title_word_count = title_word_count + word_count %}{{ ta }} {% endif %}{% endfor %}...{% else %}{{ title }}{% endif %}</a>
This takes into consideration both words and characters (*the "word boundary" setting in D8 was displaying nothing).
Executive summary: it's 64 bits, or larger.
unsigned long long
is the same as unsigned long long int
. Its size is platform-dependent, but guaranteed by the C standard (ISO C99) to be at least 64 bits. There was no long long
in C89, but apparently even MSVC supports it, so it's quite portable.
In the current C++ standard (issued in 2003), there is no long long
, though many compilers support it as an extension. The upcoming C++0x standard will support it and its size will be the same as in C, so at least 64 bits.
You can get the exact size, in bytes (8 bits on typical platforms) with the expression sizeof(unsigned long long)
. If you want exactly 64 bits, use uint64_t
, which is defined in the header <stdint.h>
along with a bunch of related types (available in C99, C++11 and some current C++ compilers).
in rare cases when you can't use strncat
, strcat
or strcpy
. And you don't have access to <string.h>
so you can't use strlen
. Also you maybe don't even know the size of the char arrays and you still want to concatenate because you got only pointers. Well, you can do old school malloc and count characters yourself like..
char *combineStrings(char* inputA, char* inputB) {
size_t len = 0, lenB = 0;
while(inputA[len] != '\0') len++;
while(inputB[lenB] != '\0') lenB++;
char* output = malloc(len+lenB);
sprintf((char*)output,"%s%s",inputA,inputB);
return output;
}
It just needs #include <stdio.h>
which you will have most likely included already
Yes, on the server side $_SERVER['DOCUMENT_ROOT']
is equivalent to /
on the client side.
For example: the value of "{$_SERVER['DOCUMENT_ROOT']}/images/thumbnail.png"
will be the string /var/www/html/images/thumbnail.png
on a server where it's local file at that path can be reached from the client side at the url http://example.com/images/thumbnail.png
No, in other words the value of $_SERVER['DOCUMENT_ROOT']
is not /
rather it is the server's local path to what the server shows the client at example.com/
note: $_SERVER['DOCUMENT_ROOT']
does not include a trailing /
Why don't you just right click on the main()
method and choose "Debug As... Java Application"
?
.isDisplayed()
assumes the element is present (exists in the DOM)
so if you do
expect($('[ng-show=saving]').isDisplayed()).toBe(true);
but the element is not present, then instead of graceful failed expectation, $('[ng-show=saving]').isDisplayed()
will throw an error causing the rest of it
block not executed
If you assume, the element you're checking may not be present for any reason on the page, then go with a safe way below
/**
* element is Present and is Displayed
* @param {ElementFinder} $element Locator of element
* @return {boolean}
*/
let isDisplayed = function ($element) {
return (await $element.isPresent()) && (await $element.isDisplayed())
}
and use
expect(await isDisplayed( $('[ng-show=saving]') )).toBe(true);
Funnily i was getting the following error for having one th-/th pair too many and still google directed me here. I'll leave it written down so people can find it.
jquery.dataTables.min.js:27 Uncaught TypeError: Cannot read property 'className' of undefined
at ua (jquery.dataTables.min.js:27)
at HTMLTableElement.<anonymous> (jquery.dataTables.min.js:127)
at Function.each (jquery.min.js:2)
at n.fn.init.each (jquery.min.js:2)
at n.fn.init.j (jquery.dataTables.min.js:116)
at HTMLDocument.<anonymous> (history:619)
at i (jquery.min.js:2)
at Object.fireWith [as resolveWith] (jquery.min.js:2)
at Function.ready (jquery.min.js:2)
at HTMLDocument.K (jquery.min.js:2)
I'll answer the more general question of how to have a canvas dynamically adapt in size upon window resize. The accepted answer appropriately handles the case where width and height are both supposed to be 100%, which is what was asked for, but which also will change the aspect ratio of the canvas. Many users will want the canvas to resize on window resize, but while keeping the aspect ratio untouched. It's not the exact question, but it "fits in", just putting the question into a slightly more general context.
The window will have some aspect ratio (width / height), and so will the canvas object. How you want these two aspect ratios to relate to each other is one thing you'll have to be clear about, there is no "one size fits all" answer to that question - I'll go through some common cases of what you might want.
Most important thing you have to be clear about: the html canvas object has a width attribute and a height attribute; and then, the css of the same object also has a width and a height attribute. Those two widths and heights are different, both are useful for different things.
Changing the width and height attributes is one method with which you can always change the size of your canvas, but then you'll have to repaint everything, which will take time and is not always necessary, because some amount of size change you can accomplish via the css attributes, in which case you do not redraw the canvas.
I see 4 cases of what you might want to happen on window resize (all starting with a full screen canvas)
1: you want the width to remain 100%, and you want the aspect ratio to stay as it was. In that case, you do not need to redraw the canvas; you don't even need a window resize handler. All you need is
$(ctx.canvas).css("width", "100%");
where ctx is your canvas context. fiddle: resizeByWidth
2: you want width and height to both stay 100%, and you want the resulting change in aspect ratio to have the effect of a stretched-out image. Now, you still don't need to redraw the canvas, but you need a window resize handler. In the handler, you do
$(ctx.canvas).css("height", window.innerHeight);
fiddle: messWithAspectratio
3: you want width and height to both stay 100%, but the answer to the change in aspect ratio is something different from stretching the image. Then you need to redraw, and do it the way that is outlined in the accepted answer.
fiddle: redraw
4: you want the width and height to be 100% on page load, but stay constant thereafter (no reaction to window resize.
fiddle: fixed
All fiddles have identical code, except for line 63 where the mode is set. You can also copy the fiddle code to run on your local machine, in which case you can select the mode via a querystring argument, as ?mode=redraw
Or no JavaScript load function at all...
<html>
<head></head>
<body>
<canvas id="canvas" width="150" height="150"></canvas>
</body>
<script type="text/javascript">
var draw = function() {
var canvas = document.getElementById("canvas");
if (canvas.getContext) {
var ctx = canvas.getContext("2d");
ctx.fillStyle = "rgb(200,0,0)";
ctx.fillRect (10, 10, 55, 50);
ctx.fillStyle = "rgba(0, 0, 200, 0.5)";
ctx.fillRect (30, 30, 55, 50);
}
}
draw();
//or self executing...
(function(){
var canvas = document.getElementById("canvas");
if (canvas.getContext) {
var ctx = canvas.getContext("2d");
ctx.fillStyle = "rgb(200,0,0)";
ctx.fillRect (50, 50, 55, 50);
ctx.fillStyle = "rgba(0, 0, 200, 0.5)";
ctx.fillRect (70, 70, 55, 50);
}
})();
</script>
</html>
Had an issue with the path, it turns out that you need to specify the first '/' to get it to work! I am using VSCode/Python on macOS
I found that the cause of this problem in my case, was that I've combined my Angular app with a node.js application in the same source tree, and in the root tsconfig.json
I had:
"files": [
"./node_modules/@types/node/index.d.ts"
]
I changed this to
"compilerOptions": {
"types": ["node"]
}
And then to prevent node types being uses in your angular app, add this to tsconfig.app.json
:
"compilerOptions": {
"types": []
}
Here's an easier way:
sudo apt-get install maven
More details are here.
You could use g++ --version
in combination with the GCC ABI docs to find out.
I think this is the clearest way:
require 'open-uri'
File.write 'image.png', open('http://example.com/image.png').read
Deleting index.lock worked for me
@Phrogz answers are both great, but here is a great, more concise answer:
array.sort(function(a,b){return a.getTime() - b.getTime()});
Using the arrow function way
array.sort((a,b)=>a.getTime()-b.getTime());
found here: Sort date in Javascript
Just another way to do this:
=MID(A1, LEN(A1), 1)
You can use DataSet.Tables(0).Columns.Contains(name)
to check whether the DataTable
contains a column with a particular name.
A process performing I/O will be put in D state (uninterruptable sleep), which frees the CPU until there is a hardware interrupt which tells the CPU to return to executing the program. See man ps
for the other process states.
Depending on your kernel, there is a process scheduler, which keeps track of a runqueue of processes ready to execute. It, along with a scheduling algorithm, tells the kernel which process to assign to which CPU. There are kernel processes and user processes to consider. Each process is allocated a time-slice, which is a chunk of CPU time it is allowed to use. Once the process uses all of its time-slice, it is marked as expired and given lower priority in the scheduling algorithm.
In the 2.6 kernel, there is a O(1) time complexity scheduler, so no matter how many processes you have up running, it will assign CPUs in constant time. It is more complicated though, since 2.6 introduced preemption and CPU load balancing is not an easy algorithm. In any case, it’s efficient and CPUs will not remain idle while you wait for the I/O.
For some databases, you can just explicitly insert a NULL
into the auto_increment
column:
INSERT INTO table_name VALUES (NULL, 'my name', 'my group')
Try this:
const url = "files/images/gallery/image.jpg";_x000D_
_x000D_
console.log(url.split("/").pop());
_x000D_
You could use JSON.stringify(array)
to encode your array in JavaScript, and then use $array=json_decode($_POST['jsondata']);
in your PHP script to retrieve it.
Below code works for me
public static void sftpsript(String filepath) {
try {
String user ="demouser"; // username for remote host
String password ="demo123"; // password of the remote host
String host = "demo.net"; // remote host address
JSch jsch = new JSch();
Session session = jsch.getSession(user, host);
session.setPassword(password);
session.connect();
ChannelSftp sftpChannel = (ChannelSftp) session.openChannel("sftp");
sftpChannel.connect();
sftpChannel.put("I:/demo/myOutFile.txt", "/tmp/QA_Auto/myOutFile.zip");
sftpChannel.disconnect();
session.disconnect();
}catch(Exception ex){
ex.printStackTrace();
}
}
OR using StrictHostKeyChecking as "NO" (security consequences)
public static void sftpsript(String filepath) {
try {
String user ="demouser"; // username for remote host
String password ="demo123"; // password of the remote host
String host = "demo.net"; // remote host address
JSch jsch = new JSch();
Session session = jsch.getSession(user, host, 22);
Properties config = new Properties();
config.put("StrictHostKeyChecking", "no");
session.setConfig(config);;
session.setPassword(password);
System.out.println("user=="+user+"\n host=="+host);
session.connect();
ChannelSftp sftpChannel = (ChannelSftp) session.openChannel("sftp");
sftpChannel.connect();
sftpChannel.put("I:/demo/myOutFile.txt", "/tmp/QA_Auto/myOutFile.zip");
sftpChannel.disconnect();
session.disconnect();
}catch(Exception ex){
ex.printStackTrace();
}
}
The user that is configured to run this scheduled task must have "Log on as a batch job" rights on the computer that hosts the exe you are launching. This can be configured on the local security policy of the computer that hosts the exe. You can change the policy (on the server hosting the exe) under
Administrative Tools -> Local Security Policy -> Local Policies -> User Rights Assignment -> Log On As Batch Job
Add your user to this list (you could also make the user account a local admin on the machine hosting the exe).
Finally, you could also simply copy your exe from the network location to your local computer and run it from there instead.
Note also that a domain policy could be restricting "Log on as a batch job" rights at your organization.
As of API 26, getDeviceId() is deprecated. If you need to get the IMEI of the device, use the following:
String deviceId = "";
if (Build.VERSION.SDK_INT >= 26) {
deviceId = getSystemService(TelephonyManager.class).getImei();
}else{
deviceId = getSystemService(TelephonyManager.class).getDeviceId();
}
I did the following:
import sys
!{sys.executable} -m pip install sklearn
pointer-events: none;
Is a CSS property that makes events "pass through" the element to which it is applied and makes the event occur on the element "below".
See for details: https://developer.mozilla.org/en-US/docs/Web/CSS/pointer-events
It is not supported up to IE 11; all other vendors support it since quite some time (global support was ~92% in 12/'16): http://caniuse.com/#feat=pointer-events (thanks to @s4y for providing the link in the comments).
Im also suffered from this problem & simply, by adding port number after the ip address saved me.
$dsn = 'mysql:dbname=sms_messenger;host=127.0.0.1:8889'; $user = 'root'; $password = 'root';
This works for Mac OS
If you don't know your mysql port number, then
You can easily find the port number on MAMP home page
OR
Type following command while running the MAMP server to switch the terminal into mysql
OMBP:mamp Omal$ /Applications/MAMP/Library/bin/mysql --host=localhost -uroot -proot
Then type
mysql> SHOW GLOBAL VARIABLES LIKE 'PORT';
I became stuck on this issue having executed brew services stop postgresql
the day prior.
The day following: brew services start postgresql
would not work. This is because as is shown when you install using homebrew. postgresql uses a launchd ... which loads when your computer is powered on.
resolution:brew services start postgresql
Restart your computer.
public int[] posStatus;
public UsersInput()
{
//It means postStatus will contain 9 elements from index 0 to 8.
this.posStatus = new int[9];
}
int intUsersInput = 0;
if (posStatus[intUsersInput-1] == 0) //if i input 9, it should go to 8?
{
posStatus[intUsersInput-1] += 1; //set it to 1
}
to convert a file to its binary codes(hexadecimal representation) we say:
xxd filename #
e.g:
xxd hello.c #
to see all the contents and codes in a binary file , we could use commands like readelf
and objdump
, hexdump
,... .
for example if we want to see all the convert all the contents of a binary file(executable, shared libraries, object files) we say:
hexdump binaryfilename
e.g.
hexdump /bin/bash
but readelf is the best utility for analyzing elf(executable and linking format) files. so if we say:
readelf -a /bin/bash
all the contents in the binary file bash would be shown to us, also we could provide different flags for readelf to see all the sections and headers of an elf file separately, for example if we want to see only the elf header we say:
readelf -h /bin/bash
for reading all the segments of the file:
readelf -l /bin/bash
for reading all the sections of the file:
readelf -S /bin/sh
but again as summary , for reading a normal file like "hello.c" and a binary file like bash in path /bin/bash in linux we say:
xxd hello.c
readelf -a /bin/bash
I had a similar error using spring/jhipster
RESTful service (via Postman
)
The endpoint was something like:
@RequestMapping(value = "/index-entries/{id}",
method = RequestMethod.GET,
produces = MediaType.APPLICATION_JSON_VALUE)
@Timed
public ResponseEntity<IndexEntry> getIndexEntry(@PathVariable Long id) {
I was attempting to call the restful
endpoint via Postman
with header Accept: text/plain
but I needed to use Accept: application/json
Extend LinearLayout/RelativeLayout and use it straight on the XML
package com.pkg_name ;
...imports...
public class LinearLayoutOutlined extends LinearLayout {
Paint paint;
public LinearLayoutOutlined(Context context) {
super(context);
// TODO Auto-generated constructor stub
setWillNotDraw(false) ;
paint = new Paint();
}
public LinearLayoutOutlined(Context context, AttributeSet attrs) {
super(context, attrs);
// TODO Auto-generated constructor stub
setWillNotDraw(false) ;
paint = new Paint();
}
@Override
protected void onDraw(Canvas canvas) {
/*
Paint fillPaint = paint;
fillPaint.setARGB(255, 0, 255, 0);
fillPaint.setStyle(Paint.Style.FILL);
canvas.drawPaint(fillPaint) ;
*/
Paint strokePaint = paint;
strokePaint.setARGB(255, 255, 0, 0);
strokePaint.setStyle(Paint.Style.STROKE);
strokePaint.setStrokeWidth(2);
Rect r = canvas.getClipBounds() ;
Rect outline = new Rect( 1,1,r.right-1, r.bottom-1) ;
canvas.drawRect(outline, strokePaint) ;
}
}
<?xml version="1.0" encoding="utf-8"?>
<com.pkg_name.LinearLayoutOutlined
xmlns:android="http://schemas.android.com/apk/res/android"
android:orientation="vertical"
android:layout_width=...
android:layout_height=...
>
... your widgets here ...
</com.pkg_name.LinearLayoutOutlined>
Probably your problem is that for Docker that has been installed from default Ubuntu repository, the package name is docker.io
Or package name may be something like docker-ce
.
Try running
dpkg -l | grep -i docker
to identify what installed package you have
So you need to change package name in commands from https://stackoverflow.com/a/31313851/2340159 to match package name. For example, for docker.io
it would be:
sudo apt-get purge -y docker.io
sudo apt-get autoremove -y --purge docker.io
sudo apt-get autoclean
It adds:
The above commands will not remove images, containers, volumes, or user created configuration files on your host. If you wish to delete all images, containers, and volumes run the following command:
sudo rm -rf /var/lib/docker
Remove docker from apparmor.d:
sudo rm /etc/apparmor.d/docker
Remove docker group:
sudo groupdel docker
The easiest way I can find to do it is:
SELECT
SUBSTRING(FullName, 1, CHARINDEX(' ', FullName) - 1) AS FirstName,
REVERSE(SUBSTRING(REVERSE(FullName), 1, CHARINDEX(' ', REVERSE(FullName)) - 1)) AS LastName
FROM
[PERSON_TABLE]
I use ExpressMaint.
To backup all user databases I do for example:
C:\>ExpressMaint.exe -S (local)\sqlexpress -D ALL_USER -T DB -BU HOURS -BV 1 -B c:\backupdir\ -DS
app.get('/category', function(req, res) {
var string = query
res.redirect('/?valid=' + string);
});
in the ejs you can directly use valid:
<% var k = valid %>
The problem is that you forgot to import os. Add this line of code:
import os
And everything should be fine. Hope this helps!
Using only strlen from string.h
sorry for my English
char * str_replace(char * text,char * rep, char * repw){//text -> to replace in it | rep -> replace | repw -> replace with
int replen = strlen(rep),repwlen = strlen(repw),count;//some constant variables
for(int i=0;i<strlen(text);i++){//search for the first character from rep in text
if(text[i] == rep[0]){//if it found it
count = 1;//start searching from the next character to avoid repetition
for(int j=1;j<replen;j++){
if(text[i+j] == rep[j]){//see if the next character in text is the same as the next in the rep if not break
count++;
}else{
break;
}
}
if(count == replen){//if count equals to the lenght of the rep then we found the word that we want to replace in the text
if(replen < repwlen){
for(int l = strlen(text);l>i;l--){//cuz repwlen greater than replen we need to shift characters to the right to make space for the replacement to fit
text[l+repwlen-replen] = text[l];//shift by repwlen-replen
}
}
if(replen > repwlen){
for(int l=i+replen-repwlen;l<strlen(text);l++){//cuz replen greater than repwlen we need to shift the characters to the left
text[l-(replen-repwlen)] = text[l];//shift by replen-repwlen
}
text[strlen(text)-(replen-repwlen)] = '\0';//get rid of the last unwanted characters
}
for(int l=0;l<repwlen;l++){//replace rep with repwlen
text[i+l] = repw[l];
}
if(replen != repwlen){
i+=repwlen-1;//pass to the next character | try text "y" ,rep "y",repw "yy" without this line to understand
}
}
}
}
return text;
}
if you want strlen code to avoid calling string.h
int strlen(char * string){//use this code to avoid calling string.h
int lenght = 0;
while(string[lenght] != '\0'){
lenght++;
}
return lenght;
}
JustinStolle's answer in a different way. A few notes:
print
statement may truncate the string to 4000 characters, but my test string for example was 9520 characters in length.[tr/th]
indicates hierarchy, e.g., <tr><th>...</th></tr>
.[@name]
adds fields as XML attributes.null
in between fields prevents that.declare @body nvarchar(max)
select @body = cast((
select N'2' [@cellpadding], N'2' [@cellspacing], N'1' [@border],
N'Database Table' [tr/th], null [tr/td],
N'Entity Count' [tr/th], null [tr/td],
N'Total Rows' [tr/th], null,
(select object_name( object_id ) [td], null,
count( distinct name ) [td], null,
count( * ) [td], null
from sys.columns
group by object_name( object_id )
for xml path('tr'), type)
for xml path('table'), type
) as nvarchar(max))
print @body -- only shows up to 4000 characters depending
With IIS's self-signed certificate feature, you cannot set the common name (CN) for the certificate, and therefore cannot create a certificate bound to your choice of subdomain.
One way around the problem is to use makecert.exe, which is bundled with the .Net 2.0 SDK. On my server it's at:
C:\Program Files\Microsoft.Net\SDK\v2.0 64bit\Bin\makecert.exe
You can create a signing authority and store it in the LocalMachine certificates repository as follows (these commands must be run from an Administrator account or within an elevated command prompt):
makecert.exe -n "CN=My Company Development Root CA,O=My Company,
OU=Development,L=Wallkill,S=NY,C=US" -pe -ss Root -sr LocalMachine
-sky exchange -m 120 -a sha1 -len 2048 -r
You can then create a certificate bound to your subdomain and signed by your new authority:
(Note that the the value of the -in parameter must be the same as the CN value used to generate your authority above.)
makecert.exe -n "CN=subdomain.example.com" -pe -ss My -sr LocalMachine
-sky exchange -m 120 -in "My Company Development Root CA" -is Root
-ir LocalMachine -a sha1 -eku 1.3.6.1.5.5.7.3.1
Your certificate should then appear in IIS Manager to be bound to your site as explained in Tom Hall's post.
All kudos for this solution to Mike O'Brien for his excellent blog post at http://www.mikeobrien.net/blog/creating-self-signed-wildcard
Try this example
CREATE PROCEDURE MyProc
BEGIN
--Stored Procedure variables
Declare @maxOr int;
Declare @maxCa int;
--Getting query result in the variable (first variant of syntax)
SET @maxOr = (SELECT MAX(orId) FROM [order]);
--Another variant of seting variable from query
SELECT @maxCa=MAX(caId) FROM [cart];
--Updating record through the variable
INSERT INTO [order_cart] (orId,caId)
VALUES(@maxOr, @maxCa);
--return values to the program as dataset
SELECT
@maxOr AS maxOr,
@maxCa AS maxCa
-- return one int value as "return value"
RETURN @maxOr
END
GO
SQL-command to call the stored procedure
EXEC MyProc
Yes, it's
use Illuminate\Support\Facades\Redirect;
return Redirect::to('http://heera.it');
Update: Redirect::away('url')
(For external link, Laravel Version 4.19):
public function away($path, $status = 302, $headers = array())
{
return $this->createRedirect($path, $status, $headers);
}
Eclipse can't work out what you want to run and since you've not run anything before, it can't try re-running that either.
Instead of clicking the green 'run' button, click the dropdown next to it and chose Run Configurations. On the Android tab, make sure it's set to your project. In the Target tab, set the tick box and options as appropriate to target your device. Then click Run. Keep an eye on your Console tab in Eclipse - that'll let you know what's going on. Once you've got your run configuration set, you can just hit the green 'run' button next time.
Sometimes getting everything to talk to your device can be problematic to begin with. Consider using an AVD (i.e. an emulator) as alternative, at least to begin with if you have problems. You can easily create one from the menu Window -> Android Virtual Device Manager within Eclipse.
To view the progress of your project being installed and started on your device, check the console. It's a panel within Eclipse with the tabs Problems/Javadoc/Declaration/Console/LogCat etc. It may be minimised - check the tray in the bottom right. Or just use Window/Show View/Console from the menu to make it come to the front. There are two consoles, Android and DDMS - there is a dropdown by its icon where you can switch.
Important behaviour that has not yet been mentioned:
Programmatically setting the checked attribute, does not fire the change
event of the checkbox.
See for yourself in this fiddle:
http://jsfiddle.net/fjaeger/L9z9t04p/4/
(Fiddle tested in Chrome 46, Firefox 41 and IE 11)
click()
methodSome day you might find yourself writing code, which relies on the event being fired. To make sure the event fires, call the click()
method of the checkbox element, like this:
document.getElementById('checkbox').click();
However, this toggles the checked status of the checkbox, instead of specifically setting it to true
or false
. Remember that the change
event should only fire, when the checked attribute actually changes.
It also applies to the jQuery way: setting the attribute using prop
or attr
, does not fire the change
event.
checked
to a specific valueYou could test the checked
attribute, before calling the click()
method. Example:
function toggle(checked) {
var elm = document.getElementById('checkbox');
if (checked != elm.checked) {
elm.click();
}
}
Read more about the click method here:
https://developer.mozilla.org/en-US/docs/Web/API/HTMLElement/click
If you want to apply the WHERE clause to the result of the UNION, then you have to embed the UNION in the FROM clause:
SELECT *
FROM (SELECT * FROM TableA
UNION
SELECT * FROM TableB
) AS U
WHERE U.Col1 = ...
I'm assuming TableA and TableB are union-compatible. You could also apply a WHERE clause to each of the individual SELECT statements in the UNION, of course.
very simple find port 5900:
sudo lsof -i :5900
then considering 59553 as PID
sudo kill 59553
Strangely enough, the solution ended up being to change
volumes:
- ./postgres-data:/var/lib/postgresql
to
volumes:
- ./postgres-data:/var/lib/postgresql/data
For the question
How can i run a jar file in command prompt but with arguments
.
To pass arguments to the jar file at the time of execution
java -jar myjar.jar arg1 arg2
In the main() method of "Main-Class" [mentioned in the manifest.mft file]of your JAR file. you can retrieve them like this:
String arg1 = args[0];
String arg2 = args[1];
You can use sqlcmd to run a backup, or any other T-SQL script. You can find the detailed instructions and examples on various useful sqlcmd switches in this article: Working with the SQL Server command line (sqlcmd)
You can see the full table of percentages to hex values and run the code in this playground in https://play.golang.org/p/l1JaPYFzDkI .
More infos for the conversion decimal <=> hexadecimal
The problem can be solved generically by a cross multiplication.
We have a percentage (ranging from 0 to 100 ) and another number (ranging from 0 to 255) then converted to hexadecimal.
For 1%
For 2%
The table in the best answer gives the percentage by step of 5%.
How to calculate the numbers between in your head ? Due to the 2.5 increment, add 2 to the first and 3 to the next
I prefer to teach how to find the solution rather than showing an answer table you don't know where the results come from.
Give a man a fish and you feed him for a day; teach a man to fish and you feed him for a lifetime
The Like button coded to show "Recommend" is 84px wide and the "Like" button is 44px, will save some time for you CSS guys like me who need to hide how unpopular my page currently is! I put this code on top of my homepage, so initially I don't want it to advertise how few Likes I have.
/*
* Code Prepared by **Muhammad Mubashir**.
* Analyst Software Engineer.
Email Id : [email protected]
Skype Id : muhammad.mubashir.ansari
Code: **August, 2011.**
Description: **Get Updates(means New .Apk File) from IIS Server and Download it on Device SD Card,
and Uninstall Previous (means OLD .apk) and Install New One.
and also get Installed App Version Code & Version Name.**
All Rights Reserved.
*/
package com.SelfInstall01;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.HttpURLConnection;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.ArrayList;
import java.util.List;
import com.SelfInstall01.SelfInstall01Activity;
import android.app.Activity;
import android.app.AlertDialog;
import android.app.Dialog;
import android.app.AlertDialog.Builder;
import android.content.DialogInterface;
import android.content.Intent;
import android.content.pm.PackageInfo;
import android.net.Uri;
import android.os.Bundle;
import android.os.Environment;
import android.view.View;
import android.view.View.OnClickListener;
import android.widget.Button;
import android.widget.TextView;
import android.widget.Toast;
public class SelfInstall01Activity extends Activity
{
class PInfo {
private String appname = "";
private String pname = "";
private String versionName = "";
private int versionCode = 0;
//private Drawable icon;
/*private void prettyPrint() {
//Log.v(appname + "\t" + pname + "\t" + versionName + "\t" + versionCode);
}*/
}
public int VersionCode;
public String VersionName="";
public String ApkName ;
public String AppName ;
public String BuildVersionPath="";
public String urlpath ;
public String PackageName;
public String InstallAppPackageName;
public String Text="";
TextView tvApkStatus;
Button btnCheckUpdates;
TextView tvInstallVersion;
/** Called when the activity is first created. */
@Override
public void onCreate(Bundle savedInstanceState)
{
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
//Text= "Old".toString();
Text= "New".toString();
ApkName = "SelfInstall01.apk";//"Test1.apk";// //"DownLoadOnSDcard_01.apk"; //
AppName = "SelfInstall01";//"Test1"; //
BuildVersionPath = "http://10.0.2.2:82/Version.txt".toString();
PackageName = "package:com.SelfInstall01".toString(); //"package:com.Test1".toString();
urlpath = "http://10.0.2.2:82/"+ Text.toString()+"_Apk/" + ApkName.toString();
tvApkStatus =(TextView)findViewById(R.id.tvApkStatus);
tvApkStatus.setText(Text+" Apk Download.".toString());
tvInstallVersion = (TextView)findViewById(R.id.tvInstallVersion);
String temp = getInstallPackageVersionInfo(AppName.toString());
tvInstallVersion.setText("" +temp.toString());
btnCheckUpdates =(Button)findViewById(R.id.btnCheckUpdates);
btnCheckUpdates.setOnClickListener(new OnClickListener()
{
@Override
public void onClick(View arg0)
{
GetVersionFromServer(BuildVersionPath);
if(checkInstalledApp(AppName.toString()) == true)
{
Toast.makeText(getApplicationContext(), "Application Found " + AppName.toString(), Toast.LENGTH_SHORT).show();
}else{
Toast.makeText(getApplicationContext(), "Application Not Found. "+ AppName.toString(), Toast.LENGTH_SHORT).show();
}
}
});
}// On Create END.
private Boolean checkInstalledApp(String appName){
return getPackages(appName);
}
// Get Information about Only Specific application which is Install on Device.
public String getInstallPackageVersionInfo(String appName)
{
String InstallVersion = "";
ArrayList<PInfo> apps = getInstalledApps(false); /* false = no system packages */
final int max = apps.size();
for (int i=0; i<max; i++)
{
//apps.get(i).prettyPrint();
if(apps.get(i).appname.toString().equals(appName.toString()))
{
InstallVersion = "Install Version Code: "+ apps.get(i).versionCode+
" Version Name: "+ apps.get(i).versionName.toString();
break;
}
}
return InstallVersion.toString();
}
private Boolean getPackages(String appName)
{
Boolean isInstalled = false;
ArrayList<PInfo> apps = getInstalledApps(false); /* false = no system packages */
final int max = apps.size();
for (int i=0; i<max; i++)
{
//apps.get(i).prettyPrint();
if(apps.get(i).appname.toString().equals(appName.toString()))
{
/*if(apps.get(i).versionName.toString().contains(VersionName.toString()) == true &&
VersionCode == apps.get(i).versionCode)
{
isInstalled = true;
Toast.makeText(getApplicationContext(),
"Code Match", Toast.LENGTH_SHORT).show();
openMyDialog();
}*/
if(VersionCode <= apps.get(i).versionCode)
{
isInstalled = true;
/*Toast.makeText(getApplicationContext(),
"Install Code is Less.!", Toast.LENGTH_SHORT).show();*/
DialogInterface.OnClickListener dialogClickListener = new DialogInterface.OnClickListener()
{
@Override
public void onClick(DialogInterface dialog, int which) {
switch (which)
{
case DialogInterface.BUTTON_POSITIVE:
//Yes button clicked
//SelfInstall01Activity.this.finish(); Close The App.
DownloadOnSDcard();
InstallApplication();
UnInstallApplication(PackageName.toString());
break;
case DialogInterface.BUTTON_NEGATIVE:
//No button clicked
break;
}
}
};
AlertDialog.Builder builder = new AlertDialog.Builder(this);
builder.setMessage("New Apk Available..").setPositiveButton("Yes Proceed", dialogClickListener)
.setNegativeButton("No.", dialogClickListener).show();
}
if(VersionCode > apps.get(i).versionCode)
{
isInstalled = true;
/*Toast.makeText(getApplicationContext(),
"Install Code is better.!", Toast.LENGTH_SHORT).show();*/
DialogInterface.OnClickListener dialogClickListener = new DialogInterface.OnClickListener()
{
@Override
public void onClick(DialogInterface dialog, int which) {
switch (which)
{
case DialogInterface.BUTTON_POSITIVE:
//Yes button clicked
//SelfInstall01Activity.this.finish(); Close The App.
DownloadOnSDcard();
InstallApplication();
UnInstallApplication(PackageName.toString());
break;
case DialogInterface.BUTTON_NEGATIVE:
//No button clicked
break;
}
}
};
AlertDialog.Builder builder = new AlertDialog.Builder(this);
builder.setMessage("NO need to Install.").setPositiveButton("Install Forcely", dialogClickListener)
.setNegativeButton("Cancel.", dialogClickListener).show();
}
}
}
return isInstalled;
}
private ArrayList<PInfo> getInstalledApps(boolean getSysPackages)
{
ArrayList<PInfo> res = new ArrayList<PInfo>();
List<PackageInfo> packs = getPackageManager().getInstalledPackages(0);
for(int i=0;i<packs.size();i++)
{
PackageInfo p = packs.get(i);
if ((!getSysPackages) && (p.versionName == null)) {
continue ;
}
PInfo newInfo = new PInfo();
newInfo.appname = p.applicationInfo.loadLabel(getPackageManager()).toString();
newInfo.pname = p.packageName;
newInfo.versionName = p.versionName;
newInfo.versionCode = p.versionCode;
//newInfo.icon = p.applicationInfo.loadIcon(getPackageManager());
res.add(newInfo);
}
return res;
}
public void UnInstallApplication(String packageName)// Specific package Name Uninstall.
{
//Uri packageURI = Uri.parse("package:com.CheckInstallApp");
Uri packageURI = Uri.parse(packageName.toString());
Intent uninstallIntent = new Intent(Intent.ACTION_DELETE, packageURI);
startActivity(uninstallIntent);
}
public void InstallApplication()
{
Uri packageURI = Uri.parse(PackageName.toString());
Intent intent = new Intent(android.content.Intent.ACTION_VIEW, packageURI);
// Intent intent = new Intent(android.content.Intent.ACTION_VIEW);
//intent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
//intent.setFlags(Intent.ACTION_PACKAGE_REPLACED);
//intent.setAction(Settings. ACTION_APPLICATION_SETTINGS);
intent.setDataAndType
(Uri.fromFile(new File(Environment.getExternalStorageDirectory() + "/download/" + ApkName.toString())),
"application/vnd.android.package-archive");
// Not open this Below Line Because...
////intent.setClass(this, Project02Activity.class); // This Line Call Activity Recursively its dangerous.
startActivity(intent);
}
public void GetVersionFromServer(String BuildVersionPath)
{
//this is the file you want to download from the remote server
//path ="http://10.0.2.2:82/Version.txt";
//this is the name of the local file you will create
// version.txt contain Version Code = 2; \n Version name = 2.1;
URL u;
try {
u = new URL(BuildVersionPath.toString());
HttpURLConnection c = (HttpURLConnection) u.openConnection();
c.setRequestMethod("GET");
c.setDoOutput(true);
c.connect();
//Toast.makeText(getApplicationContext(), "HttpURLConnection Complete.!", Toast.LENGTH_SHORT).show();
InputStream in = c.getInputStream();
ByteArrayOutputStream baos = new ByteArrayOutputStream();
byte[] buffer = new byte[1024]; //that stops the reading after 1024 chars..
//in.read(buffer); // Read from Buffer.
//baos.write(buffer); // Write Into Buffer.
int len1 = 0;
while ( (len1 = in.read(buffer)) != -1 )
{
baos.write(buffer,0, len1); // Write Into ByteArrayOutputStream Buffer.
}
String temp = "";
String s = baos.toString();// baos.toString(); contain Version Code = 2; \n Version name = 2.1;
for (int i = 0; i < s.length(); i++)
{
i = s.indexOf("=") + 1;
while (s.charAt(i) == ' ') // Skip Spaces
{
i++; // Move to Next.
}
while (s.charAt(i) != ';'&& (s.charAt(i) >= '0' && s.charAt(i) <= '9' || s.charAt(i) == '.'))
{
temp = temp.toString().concat(Character.toString(s.charAt(i))) ;
i++;
}
//
s = s.substring(i); // Move to Next to Process.!
temp = temp + " "; // Separate w.r.t Space Version Code and Version Name.
}
String[] fields = temp.split(" ");// Make Array for Version Code and Version Name.
VersionCode = Integer.parseInt(fields[0].toString());// .ToString() Return String Value.
VersionName = fields[1].toString();
baos.close();
}
catch (MalformedURLException e) {
Toast.makeText(getApplicationContext(), "Error." + e.getMessage(), Toast.LENGTH_SHORT).show();
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
Toast.makeText(getApplicationContext(), "Error." + e.getMessage(), Toast.LENGTH_SHORT).show();
}
//return true;
}// Method End.
// Download On My Mobile SDCard or Emulator.
public void DownloadOnSDcard()
{
try{
URL url = new URL(urlpath.toString()); // Your given URL.
HttpURLConnection c = (HttpURLConnection) url.openConnection();
c.setRequestMethod("GET");
c.setDoOutput(true);
c.connect(); // Connection Complete here.!
//Toast.makeText(getApplicationContext(), "HttpURLConnection complete.", Toast.LENGTH_SHORT).show();
String PATH = Environment.getExternalStorageDirectory() + "/download/";
File file = new File(PATH); // PATH = /mnt/sdcard/download/
if (!file.exists()) {
file.mkdirs();
}
File outputFile = new File(file, ApkName.toString());
FileOutputStream fos = new FileOutputStream(outputFile);
// Toast.makeText(getApplicationContext(), "SD Card Path: " + outputFile.toString(), Toast.LENGTH_SHORT).show();
InputStream is = c.getInputStream(); // Get from Server and Catch In Input Stream Object.
byte[] buffer = new byte[1024];
int len1 = 0;
while ((len1 = is.read(buffer)) != -1) {
fos.write(buffer, 0, len1); // Write In FileOutputStream.
}
fos.close();
is.close();//till here, it works fine - .apk is download to my sdcard in download file.
// So please Check in DDMS tab and Select your Emulator.
//Toast.makeText(getApplicationContext(), "Download Complete on SD Card.!", Toast.LENGTH_SHORT).show();
//download the APK to sdcard then fire the Intent.
}
catch (IOException e)
{
Toast.makeText(getApplicationContext(), "Error! " +
e.toString(), Toast.LENGTH_LONG).show();
}
}
}
Can you provide an example, because put should work fine as well?
Documentation -
The type of request to make ("POST" or "GET"); the default is "GET". Note: Other HTTP request methods, such as PUT and DELETE, can also be used here, but they are not supported by all browsers.
Have the example in fiddle and the form parameters are passed fine (as it is put it will not be appended to url
) -
$.ajax({
url: '/echo/html/',
type: 'PUT',
data: "name=John&location=Boston",
success: function(data) {
alert('Load was performed.');
}
});
Demo tested from jQuery 1.3.2 onwards on Chrome.
I just made an imageCrop and Upload feature with
https://www.npmjs.com/package/react-image-crop
to get the ImagePreview ( the cropped image rendering in a canvas)
https://developer.mozilla.org/en-US/docs/Web/API/HTMLCanvasElement/toBlob
canvas.toBlob(function(blob){...}, 'image/jpeg', 0.95);
I prefer sending data in blob with content type image/jpeg
rather than toDataURL
( a huge base64 string`
My implementation for uploading to Azure Blob using SAS URL
axios.post(azure_sas_url, image_in_blob, {
headers: {
'x-ms-blob-type': 'BlockBlob',
'Content-Type': 'image/jpeg'
}
})
This problem looked familiar so I thought I'd see if I could replicate from the limited amount of information.
A quick search turned up an entry in James Bennett's blog here which mentions that when working with the UserProfile to extend the User model a common mistake in settings.py can cause Django to throw this error.
To quote the blog entry:
The value of the setting is not "appname.models.modelname", it's just "appname.modelname". The reason is that Django is not using this to do a direct import; instead, it's using an internal model-loading function which only wants the name of the app and the name of the model. Trying to do things like "appname.models.modelname" or "projectname.appname.models.modelname" in the AUTH_PROFILE_MODULE setting will cause Django to blow up with the dreaded "too many values to unpack" error, so make sure you've put "appname.modelname", and nothing else, in the value of AUTH_PROFILE_MODULE.
If the OP had copied more of the traceback I would expect to see something like the one below which I was able to duplicate by adding "models" to my AUTH_PROFILE_MODULE setting.
TemplateSyntaxError at /
Caught an exception while rendering: too many values to unpack
Original Traceback (most recent call last):
File "/home/brandon/Development/DJANGO_VERSIONS/Django-1.0/django/template/debug.py", line 71, in render_node
result = node.render(context)
File "/home/brandon/Development/DJANGO_VERSIONS/Django-1.0/django/template/debug.py", line 87, in render
output = force_unicode(self.filter_expression.resolve(context))
File "/home/brandon/Development/DJANGO_VERSIONS/Django-1.0/django/template/__init__.py", line 535, in resolve
obj = self.var.resolve(context)
File "/home/brandon/Development/DJANGO_VERSIONS/Django-1.0/django/template/__init__.py", line 676, in resolve
value = self._resolve_lookup(context)
File "/home/brandon/Development/DJANGO_VERSIONS/Django-1.0/django/template/__init__.py", line 711, in _resolve_lookup
current = current()
File "/home/brandon/Development/DJANGO_VERSIONS/Django-1.0/django/contrib/auth/models.py", line 291, in get_profile
app_label, model_name = settings.AUTH_PROFILE_MODULE.split('.')
ValueError: too many values to unpack
This I think is one of the few cases where Django still has a bit of import magic that tends to cause confusion when a small error doesn't throw the expected exception.
You can see at the end of the traceback that I posted how using anything other than the form "appname.modelname" for the AUTH_PROFILE_MODULE would cause the line "app_label, model_name = settings.AUTH_PROFILE_MODULE.split('.')" to throw the "too many values to unpack" error.
I'm 99% sure that this was the original problem encountered here.
Did you check NULLIF? http://msdn.microsoft.com/en-us/library/ms177562.aspx
Take a look on if your database is fine tuned. Especially the transactions isolation. Isn't good idea to increase the innodb_lock_wait_timeout variable.
Check your database transaction isolation level in the mysql cli:
mysql> SELECT @@GLOBAL.tx_isolation, @@tx_isolation, @@session.tx_isolation;
+-----------------------+-----------------+------------------------+
| @@GLOBAL.tx_isolation | @@tx_isolation | @@session.tx_isolation |
+-----------------------+-----------------+------------------------+
| REPEATABLE-READ | REPEATABLE-READ | REPEATABLE-READ |
+-----------------------+-----------------+------------------------+
1 row in set (0.00 sec)
You could get improvements changing de isolation level, use the oracle like READ COMMITTED instead REPEATABLE READ (InnoDB Defaults)
mysql> SET tx_isolation = 'READ-COMMITTED';
Query OK, 0 rows affected (0.00 sec)
mysql> SET GLOBAL tx_isolation = 'READ-COMMITTED';
Query OK, 0 rows affected (0.00 sec)
mysql>
Also try use SELECT FOR UPDATE only in if necesary.
If you are working on localhost, create a separate APIkey for your development and then remove restrictions on that key so that your localhost can use it. Remember to not use this key on production, so you don't expose your key to hunters online.
I had the same issue and all attempts to get the restrictions working on my localhost environment was not successful until I created a separate apikey specifically for development and then removed its restrictions. However I don't use that key on production environment, and once am done with developments, I will delete the API key immediately.
I Know this post is late, but for people that will likely face this issue in the future, this is the best route to go.
GCC compilers always try to compile your program if this is at all possible. However, in some
cases, the C and C++ standards specify that certain extensions are forbidden. Conforming compilers
such as gcc or g++ must issue a diagnostic when these extensions are encountered. For example,
the gcc compiler’s -pedantic option causes gcc to issue warnings in such cases. Using the stricter
-pedantic-errors
option converts such diagnostic warnings into errors that will cause compilation
to fail at such points. Only those non-ISO constructs that are required to be flagged by a conforming
compiler will generate warnings or errors.
I had also faced the same issue and it got resolved by changing the version from 3.2.0 to 2.6 as shown in below pom.xml snippet
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-war-plugin</artifactId>
<version>2.6</version>
<configuration>
<warSourceDirectory>src/main/webapp</warSourceDirectory>
<warName>Spring4MVC</warName>
<failOnMissingWebXml>false</failOnMissingWebXml>
</configuration>
</plugin>
Use <div class="row">
and <div class="form-group col-xs-6">
Here a fiddle :https://jsfiddle.net/core972/SMkZV/2/
In my case I was using more than two variables, and this worked for me better:
cor(x = as.matrix(tbl), method = "pearson", use = "pairwise.complete.obs")
However:
If use has the value "pairwise.complete.obs" then the correlation or covariance between each pair of variables is computed using all complete pairs of observations on those variables. This can result in covariance or correlation matrices which are not positive semi-definite, as well as NA entries if there are no complete pairs for that pair of variables.
I prefer to do it in code:
// Run a specific test only
//testing::GTEST_FLAG(filter) = "MyLibrary.TestReading"; // I'm testing a new feature, run something quickly
// Exclude a specific test
testing::GTEST_FLAG(filter) = "-MyLibrary.TestWriting"; // The writing test is broken, so skip it
I can either comment out both lines to run all tests, uncomment out the first line to test a single feature that I'm investigating/working on, or uncomment the second line if a test is broken but I want to test everything else.
You can also test/exclude a suite of features by using wildcards and writing a list, "MyLibrary.TestNetwork*" or "-MyLibrary.TestFileSystem*".
Use cx_Freeze to make exe your python program
ApplicationId must be of type UniqueIdentifier
. Your code works fine if you do:
DECLARE @TTEST TABLE
(
TEST UNIQUEIDENTIFIER
)
DECLARE @UNIQUEX UNIQUEIDENTIFIER
SET @UNIQUEX = NEWID();
INSERT INTO @TTEST
(TEST)
VALUES
(@UNIQUEX);
SELECT * FROM @TTEST
Therefore I would say it is safe to assume that ApplicationId
is not the correct data type.
I like the trick presented by Peter N Lewis on this thread: "If n has a limited range, then you can get the result you want simply by adding a known constant multiple of [the divisor] that is greater that the absolute value of the minimum."
So if I have a value d that is in degrees and I want to take
d % 180f
and I want to avoid the problems if d is negative, then instead I just do this:
(d + 720f) % 180f
This assumes that although d may be negative, it is known that it will never be more negative than -720.
Check out my addon that works with the latest Firefox version, with beautiful UI and support JS regex: https://addons.mozilla.org/en-US/firefox/addon/cross-domain-cors
Update: I just add Chrome extension for this https://chrome.google.com/webstore/detail/cross-domain-cors/mjhpgnbimicffchbodmgfnemoghjakai
Update for mid 2016:
The things are changing so fast that if it's late 2017 this answer might not be up to date anymore!
Beginners can quickly get lost in choice of build tools and workflows, but what's most up to date in 2016 is not using Bower, Grunt or Gulp at all! With help of Webpack you can do everything directly in NPM!
Google "npm as build tool" result: https://medium.com/@dabit3/introduction-to-using-npm-as-a-build-tool-b41076f488b0#.c33e74tsa
Don't get me wrong people use other workflows and I still use GULP in my legacy project(but slowly moving out of it), but this is how it's done in the best companies and developers working in this workflow make a LOT of money!
Look at this template it's a very up-to-date setup consisting of a mixture of the best and the latest technologies: https://github.com/coryhouse/react-slingshot
Your questions:
When I want to add a package (and check in the dependency into git), where does it belong - into package.json or into bower.json
Everything belongs in package.json now
Dependencies required for build are in "devDependencies" i.e. npm install require-dir --save-dev
(--save-dev updates your package.json by adding an entry to devDependencies)
npm install lodash --save
(--save updates your package.json by adding an entry to dependencies)If that is the case, when should I ever install packages explicitly like that without adding them to the file that manages dependencies (apart from installing command line tools globally)?
Always. Just because of comfort. When you add a flag (--save-dev
or --save
) the file that manages deps (package.json) gets updated automatically. Don't waste time by editing dependencies in it manually. Shortcut for npm install --save-dev package-name
is npm i -D package-name
and shortcut for npm install --save package-name
is npm i -S package-name
This is more an object initialzation question more than a jpa question, both methods work and you can have both of them at the same time , usually if the data member value is ready before the instantiation you use the constructor parameters, if this value could be updated after the instantiation you should have a setter.
New features have been added to MATLAB recently:
String arrays were introduced in R2016b (as Budo and gnovice already mentioned):
String arrays store pieces of text and provide a set of functions for working with text as data. You can index into, reshape, and concatenate strings arrays just as you can with arrays of any other type.
In addition, starting in R2017a, you can create a string using double quotes ""
.
Therefore if your MATLAB version is >= R2017a, the following will do:
for i = 1:3
Names(i) = "Sample Text";
end
Check the output:
>> Names
Names =
1×3 string array
"Sample Text" "Sample Text" "Sample Text"
No need to deal with cell arrays anymore.
You can use javascript's indexOf function.
var str1 = "ABCDEFGHIJKLMNOP";
var str2 = "DEFG";
if(str1.indexOf(str2) != -1){
alert(str2 + " found");
}
you can open your trigger with sp_helptext yourtriggername
private
modifier will make your class inaccessible from outside, so there wouldn't be any advantage of this and I think that is why it is illegal and only public
, abstract
& final
are permitted.
Note : Even you can not make it protected
.
You created the directory in the wrong place
/data/db means that it's directly under the '/' root directory, whereas you created 'data/db' (without the leading /) probably just inside another directory, such as the '/root' homedirectory.
You need to create this directory as root
Either you need to use sudo
, e.g. sudo mkdir -p /data/db
Or you need to do su -
to become superuser, and then create the directory with mkdir -p /data/db
Note:
MongoDB also has an option where you can create the data directory in another location, but that's generally not a good idea, because it just slightly complicates things such as DB recovery, because you always have to specify the db-path manually. I wouldn't recommend doing that.
Edit:
the error message you're getting is "Unable to create/open lock file: /data/db/mongod.lock errno:13 Permission denied". The directory you created doesn't seem to have the correct permissions and ownership -- it needs to be writable by the user who runs the MongoDB process.
To see the permissions and ownership of the '/data/db/' directory, do this: (this is what the permissions and ownership should look like)
$ ls -ld /data/db/
drwxr-xr-x 4 mongod mongod 4096 Oct 26 10:31 /data/db/
The left side 'drwxr-xr-x' shows the permissions for the User, Group, and Others. 'mongod mongod' shows who owns the directory, and which group that directory belongs to. Both are called 'mongod' in this case.
If your '/data/db' directory doesn't have the permissions and ownership above, do this:
First check what user and group your mongo user has:
# grep mongo /etc/passwd
mongod:x:498:496:mongod:/var/lib/mongo:/bin/false
You should have an entry for mongod in /etc/passwd , as it's a daemon.
sudo chmod 0755 /data/db
sudo chown -R 498:496 /data/db # using the user-id , group-id
You can also use the user-name and group-name, as follows: (they can be found in /etc/passwd and /etc/group )
sudo chown -R mongod:mongod /data/db
that should make it work..
In the comments below, some people used this:
sudo chown -R `id -u` /data/db
sudo chmod -R go+w /data/db
or
sudo chown -R $USER /data/db
sudo chmod -R go+w /data/db
The disadvantage is that $USER is an account which has a login shell. Daemons should ideally not have a shell for security reasons, that's why you see /bin/false in the grep of the password file above.
Check here to better understand the meaning of the directory permissions:
http://www.perlfect.com/articles/chmod.shtml
Maybe also check out one of the tutorials you can find via Google: "UNIX for beginners"
I have had this problem with the FileSystemWatcher
and found that the following code solved the problem:
fsw.SynchronizingObject = this
The control then uses the current form object to deal with the events, and will therefore be on the same thread.
What you describe is the correct way to handle this.
You said that you want to stay in the GUI. You can usually set the execute bit through the file properties menu. You could also learn how to create a custom action for the context menu to do this for you if you're so inclined. This depends on your desktop environment of course.
If you use a more advanced editor, you can script the action to happen when the file is saved. For example (I'm only really familiar with vim), you could add this to your .vimrc to make any new file that starts with "#!/*/bin/*
" executable.
au BufWritePost * if getline(1) =~ "^#!" | if getline(1) =~ "/bin/" | silent !chmod +x <afile> | endif | endif
The Spl DirectoryIterator class provides a simple interface for viewing the contents of filesystem directories.
$dir = new DirectoryIterator($path);
foreach ($dir as $fileinfo) {
if ($fileinfo->isDir() && !$fileinfo->isDot()) {
echo $fileinfo->getFilename().'<br>';
}
}
Assuming that you're constrained to using Date
, you can do the following:
Date diff = new Date(d2.getTime() - d1.getTime());
Here you're computing the differences in milliseconds since the "epoch", and creating a new Date object at an offset from the epoch. Like others have said: the answers in the duplicate question are probably better alternatives (if you aren't tied down to Date
).
The "cd" command changes the directory, but not what drive you are working with. So when you go "cd d:\temp", you are changing the D drive's directory to temp, but staying in the C drive.
Execute these two commands:
D:
cd temp
That will get you the results you want.
A more powerful way of sorting a list of NSString to use things like NSNumericSearch :
NSArray *sortedArrayOfString = [arrayOfString sortedArrayUsingComparator:^NSComparisonResult(id obj1, id obj2) {
return [(NSString *)obj1 compare:(NSString *)obj2 options:NSNumericSearch];
}];
Combined with SortDescriptor, that would give something like :
NSSortDescriptor *sort = [NSSortDescriptor sortDescriptorWithKey:@"name" ascending:YES comparator:^NSComparisonResult(id obj1, id obj2) {
return [(NSString *)obj1 compare:(NSString *)obj2 options:NSNumericSearch];
}];
NSArray *sortedArray = [anArray sortedArrayUsingDescriptors:[NSArray arrayWithObject:sort]];
If your customer class has static variables remove them so your class should look something like this.
public class customer {
private int id;
private String name;
private String DOB;
public int getId() {
return id;
}
public String getName() {
return name;
}
public String getDOB() {
return DOB;
}
public void setId(int id) {
this.id = id;
}
public void setName(String name) {
this.name = name;
}
public void setDOB(String dOB) {
this.DOB = dOB;
}
instead of something like
public class customer {
private static int id;
private static String name;
private static String DOB;
public static int getId() {
return id;
}
public static String getName() {
return name;
}
public static String getDOB() {
return DOB;
}
public static void setId(int id) {
custumer.id = id;
}
public static void setName(String name) {
customer.name = name;
}
public static void setDOB(String dOB) {
customer.DOB = dOB;
}
Of course you can, in the sense that your RDBMS will let you do it. The answer to a question of whether or not you should do it is different, though: in most situations, values that have a meaning outside your database system should not be chosen to be a primary key.
If you know that the value is unique in the system that you are modeling, it is appropriate to add a unique index or a unique constraint to your table. However, your primary key should generally be some "meaningless" value, such as an auto-incremented number or a GUID.
The rationale for this is simple: data entry errors and infrequent changes to things that appear non-changeable do happen. They become much harder to fix on values which are used as primary keys.
In this case it is just coding style.
Use of var
is only necessary when dealing with anonymous types.
In other situations it's a matter of taste.
I'm not sure if this works for you, but when I do small solo PHP projects with Eclipse, the first thing I set up is an Ant script for deploying the project to a remote testing environment. I code away locally, and whenever I want to test it, I just hit the shortcut which updates the remote site.
Eclipse has good Ant support out of the box, and the scripts aren't hard to make.
A "web site" has its code in a special App_Code directory and it's compiled into several DLLs (assemblies) at runtime. A "web application" is precompiled into one single DLL.
This works:
<select name="foo" id="foo">
<option value="1">a</option>
<option value="2">b</option>
<option value="3">c</option>
</select>
<input type="button" id="button" value="Button" />
$('#button').click(function() {
alert($('#foo option:selected').text());
alert($('#foo option:selected').val());
});
Usually you don’t have to create the Response
object yourself because make_response()
will take care of that for you.
from flask import Flask, make_response
app = Flask(__name__)
@app.route('/')
def index():
bar = '<body>foo</body>'
response = make_response(bar)
response.headers['Content-Type'] = 'text/xml; charset=utf-8'
return response
One more thing, it seems that no one mentioned the after_this_request
, I want to say something:
Executes a function after this request. This is useful to modify response objects. The function is passed the response object and has to return the same or a new one.
so we can do it with after_this_request
, the code should look like this:
from flask import Flask, after_this_request
app = Flask(__name__)
@app.route('/')
def index():
@after_this_request
def add_header(response):
response.headers['Content-Type'] = 'text/xml; charset=utf-8'
return response
return '<body>foobar</body>'
If you're using a version of Java prior to 8... you can use Joda Time and PeriodFormatter
. If you've really got a duration (i.e. an elapsed amount of time, with no reference to a calendar system) then you should probably be using Duration
for the most part - you can then call toPeriod
(specifying whatever PeriodType
you want to reflect whether 25 hours becomes 1 day and 1 hour or not, etc) to get a Period
which you can format.
If you're using Java 8 or later: I'd normally suggest using java.time.Duration
to represent the duration. You can then call getSeconds()
or the like to obtain an integer for standard string formatting as per bobince's answer if you need to - although you should be careful of the situation where the duration is negative, as you probably want a single negative sign in the output string. So something like:
public static String formatDuration(Duration duration) {
long seconds = duration.getSeconds();
long absSeconds = Math.abs(seconds);
String positive = String.format(
"%d:%02d:%02d",
absSeconds / 3600,
(absSeconds % 3600) / 60,
absSeconds % 60);
return seconds < 0 ? "-" + positive : positive;
}
Formatting this way is reasonably simple, if annoyingly manual. For parsing it becomes a harder matter in general... You could still use Joda Time even with Java 8 if you want to, of course.
//if the problem is "just" to verify that the element exist in the xml-file before you //extract the value you could do like this
XmlNodeList YOURTEMPVARIABLE = doc.GetElementsByTagName("YOUR_ELEMENTNAME");
if (YOURTEMPVARIABLE.Count > 0 )
{
doctype = YOURTEMPVARIABLE[0].InnerXml;
}
else
{
doctype = "";
}
The example in Liam's answer saves the file as string in a single line. I prefer to add formatting. Someone in the future may want to change some value manually in the file. If you add formatting it's easier to do so.
The following adds basic JSON indentation:
string json = JsonConvert.SerializeObject(_data.ToArray(), Formatting.Indented);
You need to import the module datetime
first:
>>> import datetime
After that it works:
>>> import datetime
>>> date = datetime.date.today()
>>> date
datetime.date(2013, 11, 12)
Try, the following code..
@Override
public String toString() {
return this.name();
}
Just simply use this Style
of DataGridRow
:
<DataGrid.RowStyle>
<Style TargetType="DataGridRow">
<Setter Property="IsEnabled" Value="{Binding RelativeSource={RelativeSource Self},Path=IsNewItem,Mode=OneWay}" />
</Style>
</DataGrid.RowStyle>
Use the classes found in the java.nio
namespace, in particular, the ByteBuffer
. It can do all the work for you.
byte[] arr = { 0x00, 0x01 };
ByteBuffer wrapped = ByteBuffer.wrap(arr); // big-endian by default
short num = wrapped.getShort(); // 1
ByteBuffer dbuf = ByteBuffer.allocate(2);
dbuf.putShort(num);
byte[] bytes = dbuf.array(); // { 0, 1 }
While I haven't found a good way to specify proxy network credentials in the web.config, you might find that you can still use a non-coding solution, by including this in your web.config:
<system.net>
<defaultProxy useDefaultCredentials="true">
<proxy proxyaddress="proxyAddress" usesystemdefault="True"/>
</defaultProxy>
</system.net>
The key ingredient in getting this going, is to change the IIS settings, ensuring the account that runs the process has access to the proxy server. If your process is running under LocalService, or NetworkService, then this probably won't work. Chances are, you'll want a domain account.
var myPieChart=null;
function drawChart(objChart,data){
if(myPieChart!=null){
myPieChart.destroy();
}
// Get the context of the canvas element we want to select
var ctx = objChart.getContext("2d");
myPieChart = new Chart(ctx).Pie(data, {animateScale: true});
}
I just wrote a simple directive (from existing one ofcourse) for a simple uploader in AngularJs.
(The exact jQuery uploader plugin is https://github.com/blueimp/jQuery-File-Upload)
A Simple Uploader using AngularJs (with CORS Implementation)
(Though the server side is for PHP, you can simple change it node also)
Or, if you're customizing the dialog using a theme defined in your style xml, put this line in your theme:
<item name="android:windowCloseOnTouchOutside">true</item>
its working for me. I use genymotion for Run App.
1.Firstly i was checked my local ip. goto command mode>> And write ipconfig. Example: Windows 10>> search cmd>>then Write ipconfig . 2. Then get your local ip information >>> 3.Use give your localhost ip and virtual box ip. You need to use virtual box ip for genymotion.Check below screenshot. You can you below any ip under virtualbox host network
I have created a Swift extension based on @Dima solution:
extension UIImage {
class func imageWithView(view: UIView) -> UIImage {
UIGraphicsBeginImageContextWithOptions(view.bounds.size, view.opaque, 0.0)
view.drawViewHierarchyInRect(view.bounds, afterScreenUpdates: true)
let img = UIGraphicsGetImageFromCurrentImageContext()
UIGraphicsEndImageContext()
return img
}
}
EDIT: Swift 4 improved version
extension UIImage {
class func imageWithView(_ view: UIView) -> UIImage {
UIGraphicsBeginImageContextWithOptions(view.bounds.size, view.isOpaque, 0)
defer { UIGraphicsEndImageContext() }
view.drawHierarchy(in: view.bounds, afterScreenUpdates: true)
return UIGraphicsGetImageFromCurrentImageContext() ?? UIImage()
}
}
Usage:
let view = UIView(frame: CGRect(x: 0, y: 0, width: 100, height: 100))
let image = UIImage.imageWithView(view)
You can use scriptlets, however, this is not the way to go. Nowdays inline scriplets or JAVA code in your JSP files is considered a bad habit.
You should read up on JSTL a bit more. If the ansokanInfo object is in your request or session scope, printing the object (toString() method) like this: ${ansokanInfo} can give you some base information. ${ansokanInfo.pSystem} should call the object getter method. If this all works, you can use this:
<c:if test="${ ansokanInfo.pSystem == 'NAT'}"> tataa </c:if>
Nothing. The sole difference between the types is their size (and, hence, the range of values they can represent).
SQLite table names are case insensitive, but comparison is case sensitive by default. To make this work properly in all cases you need to add COLLATE NOCASE
.
SELECT name FROM sqlite_master WHERE type='table' AND name='table_name' COLLATE NOCASE
Sets are unordered, as you say. Even though one way to implement sets is using a tree, they can also be implemented using a hash table (meaning getting the keys in sorted order may not be that trivial).
If you'd like to sort them, you can simply perform:
sorted(set(y))
which will produce a sorted list containing the set's elements. (Not a set. Again, sets are unordered.)
Otherwise, the only thing guaranteed by set
is that it makes the elements unique (nothing will be there more than once).
Hope this helps!
you can't do multiple inheritance in java. consider using interfaces:
interface I1 {}
interface I2 {}
class C implements I1, I2 {}
or inner classes:
class Outer {
class Inner1 extends Class1 {}
class Inner2 extends Class2 {}
}
Communication between controllers is done though $emit
+ $on
/ $broadcast
+ $on
methods.
So in your case you want to call a method of Controller "One" inside Controller "Two", the correct way to do this is:
app.controller('One', ['$scope', '$rootScope'
function($scope) {
$rootScope.$on("CallParentMethod", function(){
$scope.parentmethod();
});
$scope.parentmethod = function() {
// task
}
}
]);
app.controller('two', ['$scope', '$rootScope'
function($scope) {
$scope.childmethod = function() {
$rootScope.$emit("CallParentMethod", {});
}
}
]);
While $rootScope.$emit
is called, you can send any data as second parameter.
Found a nice solution by Laurent Bugnion, it can look something like this:
<UserControl xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:comment="Tag to add comments"
mc:Ignorable="d comment" d:DesignHeight="300" d:DesignWidth="300">
<Grid>
<Button Width="100"
comment:Width="example comment on Width, will be ignored......">
</Button>
</Grid>
</UserControl>
Here's the link: http://blog.galasoft.ch/posts/2010/02/quick-tip-commenting-out-properties-in-xaml/
A commenter on the link provided extra characters for the ignore prefix in lieu of highlighting:
mc:Ignorable=”ØignoreØ”
Because when I use one or another I get a window prompt asking me to download the file for both of them.
This behavior depends on the browser and the file you are trying to serve. With inline, the browser will try to open the file within the browser.
For example, if you have a PDF file and Firefox/Adobe Reader, an inline disposition will open the PDF within Firefox, whereas attachment will force it to download.
If you're serving a .ZIP file, browsers won't be able to display it inline, so for inline and attachment dispositions, the file will be downloaded.
Considering you want to check for ASCII Alphanumeric characters, Try this:
"^[a-zA-Z0-9]*$"
. Use this RegEx in String.matches(Regex)
, it will return true if the string is alphanumeric, else it will return false.
public boolean isAlphaNumeric(String s){
String pattern= "^[a-zA-Z0-9]*$";
return s.matches(pattern);
}
If it will help, read this for more details about regex: http://www.vogella.com/articles/JavaRegularExpressions/article.html
I agree that a data structure like a List is the best way to go:
List<Integer> values = new ArrayList<Integer>();
Scanner in = new Scanner(System.in);
int value;
int numValues = 0;
do {
value = in.nextInt();
values.add(value);
} while (value >= 1) && (value <= 100);
Or you can just allocate an array of a max size and load values into it:
int maxValues = 100;
int [] values = new int[maxValues];
Scanner in = new Scanner(System.in);
int value;
int numValues = 0;
do {
value = in.nextInt();
values[numValues++] = value;
} while (value >= 1) && (value <= 100) && (numValues < maxValues);
With Node 0.12, it's possible to do this synchronously now:
var fs = require('fs');
var path = require('path');
// Buffer mydata
var BUFFER = bufferFile('../public/mydata.png');
function bufferFile(relPath) {
return fs.readFileSync(path.join(__dirname, relPath)); // zzzz....
}
fs
is the file system. readFileSync() returns a Buffer, or string if you ask.
fs
correctly assumes relative paths are a security issue. path
is a work-around.
To load as a string, specify the encoding:
return fs.readFileSync(path,{ encoding: 'utf8' });
Here's the method I use:
public void AddOrUpdateAppConnectionStrings(string key, string value)
{
try
{
var configFile = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
var settings = configFile.ConnectionStrings.ConnectionStrings;
if (settings[key] == null)
{
settings.Add(new ConnectionStringSettings(key,value));
}
else
{
settings[key].ConnectionString = value;
}
configFile.Save(ConfigurationSaveMode.Modified);
ConfigurationManager.RefreshSection(configFile.ConnectionStrings.SectionInformation.Name);
Properties.Settings.Default.Reload();
}
catch (ConfigurationErrorsException)
{
Console.WriteLine("Error writing app settings");
}
}
if you directly get get max number by writing select query then there may chance that your query will give wrong value. e.g. if your table has 5 records so your increment id will be 6 and if I delete record no 5 the your table has 4 records with max id is 4 in this case you will get 5 as next increment id. insted to that you can get info from mysql defination itself. by writing following code in php
<?
$tablename = "tablename";
$next_increment = 0;
$qShowStatus = "SHOW TABLE STATUS LIKE '$tablename'";
$qShowStatusResult = mysql_query($qShowStatus) or die ( "Query failed: " . mysql_error() . "<br/>" . $qShowStatus );
$row = mysql_fetch_assoc($qShowStatusResult);
$next_increment = $row['Auto_increment'];
echo "next increment number: [$next_increment]";
?>
I jumped here looking for the very same thing, but none worked for me.
There are instances where regardless what you do, and depending on the system (Oracle Designer: Oracle 11g - PL/SQL), divs will always go to the next line, in which case you should use the span tag instead.
This worked wonders for me.
<span float: left; white-space: nowrap; overflow: hidden; onmouseover="rollOverImageSectionFiveThreeOne(this)">
<input type="radio" id="radio4" name="p_verify_type" value="SomeValue" />
</span>
Just Your Text ||
<span id="headerFiveThreeOneHelpText" float: left; white-space: nowrap; overflow: hidden;></span>
DefN
A DTO is a hardcoded data model. It only solves the problem of modeling a data record handled by a hardcoded production process, where all fields are known at compile-time and therefore accessed via strongly typed properties.
In contrast, a dynamic model or "property bag" solves the problem of modeling a data record when the production process is created at runtime.
The Cvar
A DTO can be modeled with fields or properties, but someone invented a very useful data container called the Cvar. It is a reference to a value. When a DTO is modeled with what I call reference properties, modules can be configured to share heap memory and thereby collaboratively work on it. This completely eliminates parameter passing and O2O communication from your code. In other words, DTOs having reference properties allow code to achieve zero coupling.
class Cvar { ... }
class Cvar<T> : Cvar
{
public T Value { get; set; }
}
class MyDTO
{
public Cvar<int> X { get; set; }
public Cvar<int> Y { get; set; }
public Cvar<string> mutableString { get; set; } // >;)
}
Source: http://www.powersemantics.com/
Dynamic DTOs are a necessary component for dynamic software. To instantiate a dynamic process, one compiler step is to bind each machine in the script to the reference properties the script defines. A dynamic DTO is built by adding the Cvars to a collection.
// a dynamic DTO
class CvarRegistry : Dictionary<string, Cvar> { }
Contentions
Note: because Wix labeled the use of DTOs for organizing parameters as an "anti-pattern", I will give an authoritative opinion.
return View(model); // MVC disagrees
My collaborative architecture replaces design patterns. Refer to my web articles.
Parameters provide immediate control of a stack frame machine. If you use continuous control and therefore do not need immediate control, your modules do not need parameters. My architecture has none. In-process configuration of machines (methods) adds complexity but also value (performance) when the parameters are value types. However, reference type parameters make the consumer cause cache misses to get the values off the heap anyway -- therefore, just configure the consumer with reference properties. Fact from mechanical engineering: reliance on parameters is a kind of preoptimization, because processing (making components) itself is waste. Refer to my W article for more information. http://www.powersemantics.com/w.html.
Fowler and company might realize the benefits of DTOs outside of distributed architecture if they had ever known any other architecture. Programmers only know distributed systems. Integrated collaborative systems (aka production aka manufacturing) are something I had to claim as my own architecture, because I am the first to write code this way.
Some consider the DTO an anemic domain model, meaning it lacks functionality, but this assumes an object must own the data it interacts with. This conceptual model then forces you to deliver the data between objects, which is the model for distributed processing. However on a manufacturing line, each step can access the end product and change it without owning or controlling it. That's the difference between distributed and integrated processing. Manufacturing separates the product from operations and logistics.
There's nothing inherently wrong with modeling processing as a bunch of useless office workers who e-mail work to one another without keeping an e-mail trail, except for all the extra work and headache it creates in handling logistics and return problems. A properly modeled distributed process attaches a document (active routing) to the product describing what operations it came from and will go to. The active routing is a copy of the process source routing, which is written before the process begins. In the event of a defect or other emergency change, the active routing is modified to include the operation steps it will be sent to. This then accounts for all the labor which went into production.
If you are using Grail's
Framework, it's simple to resolve lazy initialization exception by using Lazy
keyword on specific field in Domain Class.
For-example:
class Book {
static belongsTo = [author: Author]
static mapping = {
author lazy: false
}
}
Find further information here
You can simply do a replace in your string like
Str.Replace(@"\\",@"\");
Refer below Code Snip
In HTML Page
<input id="test" type="number" value="0"/>
In Java Script
document.getElementById("test").value=request.responseText;// in case of String
document.getElementById("test").value=new Number(responseText);// in case of Number
To see the file size of your containers, you can use the --size
argument of docker ps
:
docker ps --size
A possible solution using sscanf()
and scan sets:
const char* s = "ab234cid*(s349*(20kd";
int i1, i2, i3;
if (3 == sscanf(s,
"%*[^0123456789]%d%*[^0123456789]%d%*[^0123456789]%d",
&i1,
&i2,
&i3))
{
printf("%d %d %d\n", i1, i2, i3);
}
where %*[^0123456789]
means ignore input until a digit is found. See demo at http://ideone.com/2hB4UW .
Or, if the number of numbers is unknown you can use %n
specifier to record the last position read in the buffer:
const char* s = "ab234cid*(s349*(20kd";
int total_n = 0;
int n;
int i;
while (1 == sscanf(s + total_n, "%*[^0123456789]%d%n", &i, &n))
{
total_n += n;
printf("%d\n", i);
}
You can select the tables from information_schema
SELECT * FROM information_schema.tables
WHERE table_schema = 'public'
simple enough..
exit ( 0 ); }//end of function
Make sure there is a space on both sides of the 0. Without spaces, the program will not stop.
using System.IO; //add this namespace also
string[] filePaths = Directory.GetFiles(@"c:\Maps\", "*.txt",
SearchOption.TopDirectoryOnly);
Edit: this is an answer to the OP's original question about the minimal key, not the minimal answer.
You can get the keys of the dict using the keys
function, and you're right about using min
to find the minimum of that list.
In Kotlin: How to check GPS is enable or not
val manager = getSystemService(Context.LOCATION_SERVICE) as LocationManager
if (!manager.isProviderEnabled(LocationManager.GPS_PROVIDER)) {
checkGPSEnable()
}
private fun checkGPSEnable() {
val dialogBuilder = AlertDialog.Builder(this)
dialogBuilder.setMessage("Your GPS seems to be disabled, do you want to enable it?")
.setCancelable(false)
.setPositiveButton("Yes", DialogInterface.OnClickListener { dialog, id
->
startActivity(Intent(android.provider.Settings.ACTION_LOCATION_SOURCE_SETTINGS))
})
.setNegativeButton("No", DialogInterface.OnClickListener { dialog, id ->
dialog.cancel()
})
val alert = dialogBuilder.create()
alert.show()
}
Here is my version of the same solution...
declare @id int
SELECT @id = min(fPat.PatientID)
FROM tbPatients fPat
WHERE (fPat.InsNotes is not null AND DataLength(fPat.InsNotes)>0)
while @id is not null
begin
SELECT fPat.PatientID, fPat.InsNotes
FROM tbPatients fPat
WHERE (fPat.InsNotes is not null AND DataLength(fPat.InsNotes)>0) AND fPat.PatientID=@id
SELECT @id = min(fPat.PatientID)
FROM tbPatients fPat
WHERE (fPat.InsNotes is not null AND DataLength(fPat.InsNotes)>0)AND fPat.PatientID>@id
end
you could use moment-timezone to guess the timezone:
> moment.tz.guess()
"America/Asuncion"
The problem is caused by accessing an attribute with the hibernate session closed. You have not a hibernate transaction in the controller.
Possible solutions:
Do all this logic, in the service layer, (with the @Transactional), not in the controller. There should be the right place to do this, it is part of the logic of the app, not in the controller (in this case, an interface to load the model). All the operations in the service layer should be transactional. i.e.: Move this line to the TopicService.findTopicByID method:
Collection commentList = topicById.getComments();
Use 'eager' instead of 'lazy'. Now you are not using 'lazy' .. it is not a real solution, if you want to use lazy, works like a temporary (very temporary) workaround.
In general, the best solution is the 1.
The request is printed in a request.txt with details
$ch = curl_init();
$f = fopen('request.txt', 'w');
curl_setopt_array($ch, array(
CURLOPT_URL => $url,
CURLOPT_RETURNTRANSFER => 1,
CURLOPT_FOLLOWLOCATION => 1,
CURLOPT_VERBOSE => 1,
CURLOPT_STDERR => $f,
));
$response = curl_exec($ch);
fclose($f);
curl_close($ch);
You can also use curl_getinfo() function.
I got it finally! Here is my way, and I hope it can help you :)
sudo apt-get install libc6:i386
sudo -i
cd /etc/apt/sources.list.d
echo "deb http://old-releases.ubuntu.com/ubuntu/ raring main restricted universe multiverse" >ia32-libs-raring.list
apt-get update
apt-get install ia32-libs
rm /etc/apt/sources.list.d/ia32-libs-raring.list
apt-get update
exit
sudo apt-get install gcc-multilib
I don't know the reason why I need to install these, but it works on my computer. When you finish installing these packages, it's time to try. Oh yes, I need to tell you. This time when you want to compile your code, you should add -m32
after gcc
, for example: gcc -m32 -o hello helloworld.c
. Just make clean
and make
again. Good luck friends.
PS: my environment is: Ubuntu 14.04 64-bit (Trusty Tahr) and GCC version 4.8.4. I have written the solution in my blog, but it is in Chinese :-) - How to compass 32bit programm under ubuntu14.04.
The answer here worked better for me as it isolates the search on the hashtag, not just returning results that contain the search string. In the answer above you would still need to parse the JSON response to see if the entities.hashtags array is not empty.
#pragma mark - UItextfield Delegate
- (BOOL)textField:(UITextField *)textField shouldChangeCharactersInRange:(NSRange)range replacementString:(NSString *)string {
if ([string isEqualToString:@"("]||[string isEqualToString:@")"]) {
return TRUE;
}
NSLog(@"Range ==%d ,%d",range.length,range.location);
//NSRange *CURRANGE = [NSString rangeOfString:string];
if (range.location == 0 && range.length == 0) {
if ([string isEqualToString:@"+"]) {
return TRUE;
}
}
return [self isNumeric:string];
}
-(BOOL)isNumeric:(NSString*)inputString{
BOOL isValid = NO;
NSCharacterSet *alphaNumbersSet = [NSCharacterSet decimalDigitCharacterSet];
NSCharacterSet *stringSet = [NSCharacterSet characterSetWithCharactersInString:inputString];
isValid = [alphaNumbersSet isSupersetOfSet:stringSet];
return isValid;
}
The expression df1$id %in% idNums1
produces a logical vector. To negate it, you need to negate the whole vector:
!(df1$id %in% idNums1)
Just use break, like that:
int cont = 0;
foreach (ListViewItem lvi in listView.Items) {
if(cont==50) { //if listViewItem reach 50 break out.
break;
}
cont++; //increment cont.
}
cat *.png | ffmpeg -f image2pipe -i - output.mp4
from wiki
| is bitwise or, || is logical or.
If you set the editable div style to "display:inline-block; white-space: pre-wrap" you don't get new child divs when you enter a new line, you just get LF character (i.e. 
);.
function showCursPos(){
selection = document.getSelection();
childOffset = selection.focusOffset;
const range = document.createRange();
eDiv = document.getElementById("eDiv");
range.setStart(eDiv, 0);
range.setEnd(selection.focusNode, childOffset);
var sHtml = range.toString();
p = sHtml.length;
sHtml=sHtml.replace(/(\r)/gm, "\\r");
sHtml=sHtml.replace(/(\n)/gm, "\\n");
document.getElementById("caretPosHtml").value=p;
document.getElementById("exHtml").value=sHtml;
}
_x000D_
click/type in div below:
<br>
<div contenteditable name="eDiv" id="eDiv"
onkeyup="showCursPos()" onclick="showCursPos()"
style="width: 10em; border: 1px solid; display:inline-block; white-space: pre-wrap; "
>123 456 789</div>
<p>
html caret position:<br> <input type="text" id="caretPosHtml">
<p>
html from start of div:<br> <input type="text" id="exHtml">
_x000D_
What I noticed was when you press "enter" in the editable div, it creates a new node, so the focusOffset resets to zero. This is why I've had to add a range variable, and extend it from the child nodes' focusOffset back to the start of eDiv (and thus capturing all text in-between).
We can try a simpler one as follows:
docker image inspect image_id
This worked in Docker version:
DockerVersion": "18.05.0-ce"
try this
df.rename(columns={ df.columns[1]: "your value" }, inplace = True)
Debian-based systems:
$ sudo aptitude install python-yaml
or newer for python3
$ sudo aptitude install python3-yaml
If you are using Postgres.app on Mac, you may resolve this issue once and for all like this:
First gem uninstall pg
, then edit your ~/.bash_profile
or ~/.zshrc
file or equivalent and add:
# PostgreSQL bin path
export PATH=$PATH:/Applications/Postgres.app/Contents/Versions/9.4/bin
Then bundle install
and gem install pg
should both work as expected.
I would consider to refactor the service to return your domain object rather than JSON strings and let Spring handle the serialization (via the MappingJacksonHttpMessageConverter
as you write). As of Spring 3.1, the implementation looks quite neat:
@RequestMapping(produces = MediaType.APPLICATION_JSON_VALUE,
method = RequestMethod.GET
value = "/foo/bar")
@ResponseBody
public Bar fooBar(){
return myService.getBar();
}
Comments:
First, the <mvc:annotation-driven />
or the @EnableWebMvc
must be added to your application config.
Next, the produces attribute of the @RequestMapping
annotation is used to specify the content type of the response. Consequently, it should be set to MediaType.APPLICATION_JSON_VALUE (or "application/json"
).
Lastly, Jackson must be added so that any serialization and de-serialization between Java and JSON will be handled automatically by Spring (the Jackson dependency is detected by Spring and the MappingJacksonHttpMessageConverter
will be under the hood).
You can use windows Powershell to execute a query and output it to a text file
Invoke-Sqlcmd -Query "Select * from database" -ServerInstance "Servername\SQL2008" -Database "DbName" > c:\Users\outputFileName.txt
I would add that HTMLElement has a built-in .blur
method as well.
Here's a demo using both .focus
and .blur
which work in similar ways.
const input = document.querySelector("#myInput");
_x000D_
<input id="myInput" value="Some Input">_x000D_
_x000D_
<button type="button" onclick="input.focus()">Focus</button>_x000D_
<button type="button" onclick="input.blur()">Lose focus</button>
_x000D_
Same problem happened to me. So if the service returns the response as a JSON string you have to deserialize the string first, then you will be able to deserialize the object type from it properly:
string json= string.Empty;
using (var streamReader = new StreamReader(response.GetResponseStream(), true))
{
json= new JavaScriptSerializer().Deserialize<string>(streamReader.ReadToEnd());
}
//To deserialize to your object type...
MyType myType;
using (var memoryStream = new MemoryStream())
{
byte[] jsonBytes = Encoding.UTF8.GetBytes(@json);
memoryStream.Write(jsonBytes, 0, jsonBytes.Length);
memoryStream.Seek(0, SeekOrigin.Begin);
using (var jsonReader = JsonReaderWriterFactory.CreateJsonReader(memoryStream, Encoding.UTF8, XmlDictionaryReaderQuotas.Max, null))
{
var serializer = new DataContractJsonSerializer(typeof(MyType));
myType = (MyType)serializer.ReadObject(jsonReader);
}
}
4 Sure it will work.... ;)
Right click on the project
->Run As
--> Run configurations
.
Then select Maven Build
Then click new button to create a configuration of the selected type. Click on Browse workspace
(now is Workspace...
) then select your project and in goals specify eclipse:eclipse
Indeed, use onclick="this.select();"
but remember not to combine it with disabled="disabled"
- it will not work then and you will need to manually select or multi-click to select, still. If you wish to lock the content value to be selected, combine with the attribute readonly
.
This would be correct:
SELECT * FROM table WHERE field regexp concat_ws("|",(
"111",
"222",
"333"
));
The simplest way to remove inner html elements and return only text would the JQuery .text() function.
Example:
var text = $('<p>A nice house was found in <b>Toronto</b></p>');
alert( text.html() );
//Outputs A nice house was found in <b>Toronto</b>
alert( text.text() );
////Outputs A nice house was found in Toronto
A similar question is here: Is there a limit to the length of a GET request?
I've hit the limit and on my shared hosting account, but the browser returned a blank page before it got to the server I think.
For Java code, Create a POJO class for your object instead of a JSONObject. and use JSONEncapsulator for your POJO class. that way order of elements depends on the order of getter setters in your POJO class. for eg. POJO class will be like
Class myObj{
String userID;
String amount;
String success;
// getter setters in any order that you want
and where you need to send your json object in response
JSONContentEncapsulator<myObj> JSONObject = new JSONEncapsulator<myObj>("myObject");
JSONObject.setObject(myObj);
return Response.status(Status.OK).entity(JSONObject).build();
The response of this line will be
{myObject : {//attributes order same as getter setter order.}}
in ubuntu 14.04 based on your php version : 5.6,7.0,7.1,7.2,7.3
sudo apt-get install php{version}-mcrypt
sudo apt-get install php7.1-mcrypt
sudo phpenmod mcrypt
To my knowledge, there is sadly no CSS filter to colorise an element (perhaps with the use of some SVG filter magic, but I'm somewhat unfamiliar with that) and even if that wasn't the case, filters are basically only supported by webkit browsers.
With that said, you could still work around this and use a canvas
to modify your image. Basically, you can draw an image element onto a canvas and then loop through the pixels, modifying the respective RGBA values to the colour you want.
However, canvases do come with some restrictions. Most importantly, you have to make sure that the image src comes from the same domain as the page. Otherwise the browser won't allow you to read or modify the pixel data of the canvas.
Here's a JSFiddle changing the colour of the JSFiddle logo.
//Base64 source, but any local source will work_x000D_
var src = "data:image/png;base64,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";_x000D_
var canvas = document.getElementById("theCanvas");_x000D_
var ctx = canvas.getContext("2d");_x000D_
var img = new Image;_x000D_
_x000D_
//wait for the image to load_x000D_
img.onload = function() {_x000D_
//Draw the original image so that you can fetch the colour data_x000D_
ctx.drawImage(img,0,0);_x000D_
var imgData = ctx.getImageData(0, 0, canvas.width, canvas.height);_x000D_
_x000D_
/*_x000D_
imgData.data is a one-dimensional array which contains _x000D_
the respective RGBA values for every pixel _x000D_
in the selected region of the context _x000D_
(note i+=4 in the loop)_x000D_
*/_x000D_
_x000D_
for (var i = 0; i < imgData.data.length; i+=4) {_x000D_
imgData.data[i] = 255; //Red, 0-255_x000D_
imgData.data[i+1] = 255; //Green, 0-255_x000D_
imgData.data[i+2] = 255; //Blue, 0-255_x000D_
/* _x000D_
imgData.data[i+3] contains the alpha value_x000D_
which we are going to ignore and leave_x000D_
alone with its original value_x000D_
*/_x000D_
}_x000D_
ctx.clearRect(0, 0, canvas.width, canvas.height); //clear the original image_x000D_
ctx.putImageData(imgData, 0, 0); //paint the new colorised image_x000D_
}_x000D_
_x000D_
//Load the image!_x000D_
img.src = src;
_x000D_
body {_x000D_
background: green;_x000D_
}
_x000D_
<canvas id="theCanvas"></canvas>
_x000D_
I like this code because it's pretty handy:
data[] <- lapply(data, function(x) type.convert(as.character(x), as.is = TRUE)) #change all vars to their best fitting data type
It is not exactly what was asked for (convert to numeric), but in many cases even more appropriate.
Yes, this is a current issue in Chrome. There is an issue report here.
The fix will appear in 40.x.y.z versions.
Until then? I don't think you can resolve the issue yourself. But you can ignore it. The shown error is only related to the dev tools and does not influence the behavior of your website. If you have any other problems they are not related to this error.
X = np.array(X, dtype=float)
You can use this to convert to array of float in python 3.7.6
You can do this. Adapt it to your situation:
for l in Nlist:
for item in l:
print item
4 spaces do the trick even inside definition list:
Endpoint
: `/listAgencies`
Method
: `GET`
Arguments
: * `level` - bla-bla.
* `withDisabled` - should we include disabled `AGENT`s.
* `userId` - bla-bla.
I am documenting API using BitBucket Wiki and Markdown proprietary extension for definition list is most pleasing (MD's table syntax is awful, imaging multiline and embedding requirements...).
For me, I forgot to add the default serial id.
private static final long serialVersionUID = 1L;
var str = '/var/www/site/Brand new document.docx';
document.write( str.replace(/\s\/g, '') );
----------
_x000D_
I just found an interesting solution to this issue. I was creating spans which contain information based on the return from a web service. I thought about trying to put a link around the span so that if I clicked on it, the "a" would capture the click.
But I was trying to capture the click with the span... so I thought why not do this when I created the span.
var span = $('<span id="something" data-href="'+url+'" />');
I then bound a click handler to the span which created a link based on the 'data-href' attribute:
span.click(function(e) {
e.stopPropagation();
var href = $(this).attr('data-href');
var link = $('<a href="http://' + href + '" />');
link.attr('target', '_blank');
window.open(link.attr('href'));
});
This successfully allowed me to click on a span and open a new window with a proper url.
text()
and node()
are node tests, in XPath terminology (compare).
Node tests operate on a set (on an axis, to be exact) of nodes and return the ones that are of a certain type. When no axis is mentioned, the child
axis is assumed by default.
There are all kinds of node tests:
node()
matches any node (the least specific node test of them all)text()
matches text nodes onlycomment()
matches comment nodes*
matches any element nodefoo
matches any element node named "foo"
processing-instruction()
matches PI nodes (they look like <?name value?>
).*
also matches attribute nodes, but only along the attribute
axis. @*
is a shorthand for attribute::*
. Attributes are not part of the child
axis, that's why a normal *
does not select them.This XML document:
<produce>
<item>apple</item>
<item>banana</item>
<item>pepper</item>
</produce>
represents the following DOM (simplified):
root node element node (name="produce") text node (value="\n ") element node (name="item") text node (value="apple") text node (value="\n ") element node (name="item") text node (value="banana") text node (value="\n ") element node (name="item") text node (value="pepper") text node (value="\n")
So with XPath:
/
selects the root node/produce
selects a child element of the root node if it has the name "produce"
(This is called the document element; it represents the document itself. Document element and root node are often confused, but they are not the same thing.) /produce/node()
selects any type of child node beneath /produce/
(i.e. all 7 children)/produce/text()
selects the 4 (!) whitespace-only text nodes/produce/item[1]
selects the first child element named "item"
/produce/item[1]/text()
selects all child text nodes (there's only one - "apple" - in this case)And so on.
So, your questions
/produce/item/text()
(3 nodes selected)//department/manager
(1 node selected)Notes
child
axis. You can change the axis by prefixing a different axis name. For example: //item/ancestor::produce
/produce/item[1]/text()
and string(/produce/item[1])
will be the same.If using version 8 and you edit the my.ini I found that Notepad is putting 3 hex characters at the beginning of the my.ini file. EF BB BF. Deleting the 3 characters from the beginning of the file in a hex editor fixes the problem.
In version 8 they are accidentally putting Unicode characters in the ini file. This is causing Notepad to save the file with Byte order mark characters.
The following line in the file is the culprit "The line # range from 1 to 2^32 - 1. “Unique” means that each ID must be different." has 3 Unicode characters. This is causing notepad to append the byte order mark to the text file.
Try these solutions, for maximum compatibility, as I have already posted here:
JavaScript:
var nm_re = /^(?:((([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-.\s])){1,}(['’,\-\.]){0,1}){2,}(([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-. ]))*(([ ]+){0,1}(((([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-\.\s])){1,})(['’\-,\.]){0,1}){2,}((([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-\.\s])){2,})?)*)$/;
HTML5:
<input type="text" name="full_name" id="full_name" pattern="^(?:((([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-.\s])){1,}(['’,\-\.]){0,1}){2,}(([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-. ]))*(([ ]+){0,1}(((([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-\.\s])){1,})(['’\-,\.]){0,1}){2,}((([^0-9_!¡?÷?¿/\\+=@#$%ˆ&*(){}|~<>;:[\]'’,\-\.\s])){2,})?)*)$" required>
You can use WhiteNoise to serve static files in production.
Install:
pip install WhiteNoise==2.0.6
And change your wsgi.py file to this:
from django.core.wsgi import get_wsgi_application
from whitenoise.django import DjangoWhiteNoise
application = get_wsgi_application()
application = DjangoWhiteNoise(application)
And you're good to go!
Credit to Handlebar Creative Blog.
BUT, it's really not recommended serving static files this way in production. Your production web server(like nginx) should take care of that.
var array3 = array1 === array2
That will compare whether array1 and array2 are the same array object in memory, which is not what you want.
In order to do what you want, you'll need to check whether the two arrays have the same length, and that each member in each index is identical.
Assuming your array is filled with primitives—numbers and or strings—something like this should do
function arraysAreIdentical(arr1, arr2){
if (arr1.length !== arr2.length) return false;
for (var i = 0, len = arr1.length; i < len; i++){
if (arr1[i] !== arr2[i]){
return false;
}
}
return true;
}
Use assertNull(...)
@Test
public void foo() {
try {
//execute code that you expect not to throw Exceptions.
} catch (Exception e){
assertNull(e);
}
}
@TonyO'Hagan is comprehrensive shelljs
answer, but, I would like to highlight the synchronous version of his answer:
var shell = require('shelljs');
var output = shell.exec('netstat -rn', {silent:true}).output;
console.log(output);
The path is in the registry but usually you edit through this interface:
Control Panel
-> System
-> System settings
-> Environment Variables
.PATH
.c:\path;c:\path2
Use time()
and localtime()
to get the time:
#include <stdio.h>
#include <time.h>
int main()
{
time_t t = time(NULL);
struct tm tm = *localtime(&t);
printf("now: %d-%02d-%02d %02d:%02d:%02d\n", tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
}
There are a number of ways to do this:
onerror
in an img
, like <img src="http://www.example.com/singlepixel.gif" onerror="alert('Connection dead');" />
.This method could also fail if the source image is moved / renamed, and would generally be an inferior choice to the ajax option.
So there are several different ways to try and detect this, none perfect, but in the absence of the ability to jump out of the browser sandbox and access the user's net connection status directly, they seem to be the best options.
Try a different encoding such as Encoding.UTF8. You can also try letting StreamReader find the encoding itself:
StreamReader reader = new StreamReader(inputFilePath, System.Text.Encoding.UTF8, true)
Edit: Just saw your update. Try letting StreamReader do the guessing.
In your specific case, your known_hosts
is a folder, so you need to remove it first.
For other people which experiencing similar issue, please check the right permission to your ~/ssh/known_hosts
as it may be owned by different user (e.g. root). So you may try to run:
sudo chown -v $USER ~/.ssh/known_hosts
to fix it.
I know this is old but given the IOptions patterns is relatively simple to implement:
Class with public get/set properties that match the settings in the configuration
public class ApplicationSettings
{
public string UrlBasePath { get; set; }
}
register your settings
public void ConfigureServices(IServiceCollection services)
{
...
services.Configure<ApplicationSettings>(Configuration.GetSection("ApplicationSettings"));
...
}
inject via IOptions
public class HomeController
{
public HomeController(IOptions<ApplicationSettings> appSettings)
{ ...
appSettings.Value.UrlBasePath
...
// or better practice create a readonly private reference
}
}
I'm not sure why you wouldn't just do this.