I have same issue , i solved issue :
step-1 : download docker-compose using following command.
1. sudo su
2. sudo curl -L https://github.com/docker/compose/releases/download/1.21.0/docker-compose-$(uname -s)-$(uname -m) -o /usr/local/bin/docker-compose
Step-2 : Run command
chmod +x /usr/local/bin/docker-compose
Step-3 : Check docker-compose version
docker-compose --version
If you are using AngularJS you need to pass the body params as string:
factory.getToken = function(person_username) {
console.log('Getting DI Token');
var url = diUrl + "/token";
return $http({
method: 'POST',
url: url,
data: 'grant_type=password&[email protected]&password=mypass',
responseType:'json',
headers: { 'Content-Type': 'application/x-www-form-urlencoded' }
});
};
aud
(Audience) ClaimAccording to RFC 7519:
The "aud" (audience) claim identifies the recipients that the JWT is intended for. Each principal intended to process the JWT MUST identify itself with a value in the audience claim. If the principal processing the claim does not identify itself with a value in the "aud" claim when this claim is present, then the JWT MUST be rejected. In the general case, the "aud" value is an array of case- sensitive strings, each containing a StringOrURI value. In the special case when the JWT has one audience, the "aud" value MAY be a single case-sensitive string containing a StringOrURI value. The interpretation of audience values is generally application specific. Use of this claim is OPTIONAL.
The Audience (aud
) claim as defined by the spec is generic, and is application specific. The intended use is to identify intended recipients of the token. What a recipient means is application specific. An audience value is either a list of strings, or it can be a single string if there is only one aud
claim. The creator of the token does not enforce that aud
is validated correctly, the responsibility is the recipient's to determine whether the token should be used.
Whatever the value is, when a recipient is validating the JWT and it wishes to validate that the token was intended to be used for its purposes, it MUST determine what value in aud
identifies itself, and the token should only validate if the recipient's declared ID is present in the aud
claim. It does not matter if this is a URL or some other application specific string. For example, if my system decides to identify itself in aud
with the string: api3.app.com
, then it should only accept the JWT if the aud
claim contains api3.app.com
in its list of audience values.
Of course, recipients may choose to disregard aud
, so this is only useful if a recipient would like positive validation that the token was created for it specifically.
My interpretation based on the specification is that the aud
claim is useful to create purpose-built JWTs that are only valid for certain purposes. For one system, this may mean you would like a token to be valid for some features but not for others. You could issue tokens that are restricted to only a certain "audience", while still using the same keys and validation algorithm.
Since in the typical case a JWT is generated by a trusted service, and used by other trusted systems (systems which do not want to use invalid tokens), these systems simply need to coordinate the values they will be using.
Of course, aud
is completely optional and can be ignored if your use case doesn't warrant it. If you don't want to restrict tokens to being used by specific audiences, or none of your systems actually will validate the aud
token, then it is useless.
One contrived (yet simple) example I can think of is perhaps we want to use JWTs for access and refresh tokens without having to implement separate encryption keys and algorithms, but simply want to ensure that access tokens will not validate as refresh tokens, or vice-versa.
By using aud
, we can specify a claim of refresh
for refresh tokens and a claim of access
for access tokens upon creating these tokens. When a request is made to get a new access token from a refresh token, we need to validate that the refresh token was a genuine refresh token. The aud
validation as described above will tell us whether the token was actually a valid refresh token by looking specifically for a claim of refresh
in aud
.
aud
ClaimThe OAuth Client ID is completely unrelated, and has no direct correlation to JWT aud
claims. From the perspective of OAuth, the tokens are opaque objects.
The application which accepts these tokens is responsible for parsing and validating the meaning of these tokens. I don't see much value in specifying OAuth Client ID within a JWT aud
claim.
I like to use Printable
with Raw Values
.
enum Audience: String, Printable {
case Public = "Public"
case Friends = "Friends"
case Private = "Private"
var description: String {
return self.rawValue
}
}
Then we can do:
let audience = Audience.Public.description // audience = "Public"
or
println("The value of Public is \(Audience.Public)")
// Prints "The value of Public is Public"
None of the answers above seemed to properly serialize properties which are on the prototype of Error (because getOwnPropertyNames()
does not include inherited properties). I was also not able to redefine the properties like one of the answers suggested.
This is the solution I came up with - it uses lodash but you could replace lodash with generic versions of those functions.
function recursivePropertyFinder(obj){
if( obj === Object.prototype){
return {};
}else{
return _.reduce(Object.getOwnPropertyNames(obj),
function copy(result, value, key) {
if( !_.isFunction(obj[value])){
if( _.isObject(obj[value])){
result[value] = recursivePropertyFinder(obj[value]);
}else{
result[value] = obj[value];
}
}
return result;
}, recursivePropertyFinder(Object.getPrototypeOf(obj)));
}
}
Error.prototype.toJSON = function(){
return recursivePropertyFinder(this);
}
Here's the test I did in Chrome:
var myError = Error('hello');
myError.causedBy = Error('error2');
myError.causedBy.causedBy = Error('error3');
myError.causedBy.causedBy.displayed = true;
JSON.stringify(myError);
{"name":"Error","message":"hello","stack":"Error: hello\n at <anonymous>:66:15","causedBy":{"name":"Error","message":"error2","stack":"Error: error2\n at <anonymous>:67:20","causedBy":{"name":"Error","message":"error3","stack":"Error: error3\n at <anonymous>:68:29","displayed":true}}}
I had the same problem with PyInstaller and Py2exe so I came across the resolution on the FAQ from cx-freeze.
When using your script from the console or as an application, the functions hereunder will deliver you the "execution path", not the "actual file path":
print(os.getcwd())
print(sys.argv[0])
print(os.path.dirname(os.path.realpath('__file__')))
Source:
http://cx-freeze.readthedocs.org/en/latest/faq.html
Your old line (initial question):
def read(*rnames):
return open(os.path.join(os.path.dirname(__file__), *rnames)).read()
Substitute your line of code with the following snippet.
def find_data_file(filename):
if getattr(sys, 'frozen', False):
# The application is frozen
datadir = os.path.dirname(sys.executable)
else:
# The application is not frozen
# Change this bit to match where you store your data files:
datadir = os.path.dirname(__file__)
return os.path.join(datadir, filename)
With the above code you could add your application to the path of your os, you could execute it anywhere without the problem that your app is unable to find it's data/configuration files.
Tested with python:
<html>
<head>
<H1>
Automatically play music files on your website when a page loads
</H1>
</head>
<body>
<embed src="YourMusic.mp3" autostart="true" loop="true" width="2" height="0">
</embed>
</body>
</html>
It's been a significant percentage of our business migrating people from Heroku to AWS. There are advantages to both, but it's gets messy on Heroku after a while... once you need a certain level of complexity no longer easy to maintain with Heroku's limitations.
That said, there are increasingly options to have the ease of Heroku and the flexibility of AWS by being on AWS with great frameworks/tools.
Like Eric, I used homebrew, but I used the default recipe. So:
brew install mercurial
brew install vim
And after restarting the terminal homebrew's vim should be the default. If not, you should update your $PATH
so that /usr/local/bin
is before /usr/bin
. E.g. add the following to your .profile
:
export PATH=/usr/local/bin:$PATH
For me this is the correct way, This just worked:
$linker = rawurldecode("$link");
<a href="<?php echo $link;?>" target="_blank"><?php echo $linker ;?></a>
This worked, and now links are displayed properly:
http://newspaper.annahar.com/article/121638-????--????-???-??-??????-?????-????-??????-??????-????-??????-?????-????????
Link found on:
If you plan to build a full functional applications with more than a handful of features, I will suggest to jump right to using Eclipse RCP as the framework.
If your application won't grow too big or your requirements are just too unique to be handled by a normal business framework, you can safely jump with Swing.
At the end of the day, I'd suggest you to try both technologies to find the one suit you better. Like Netbeans vs Eclipse vs IntelliJ, there is no the absolute correct answer here and both frameworks have their own drawbacks.
Pro Swing:
Pro SWT:
You can disable the copy paste option with jQuery by the below script:
jQuery("input").attr("onpaste","return false;");
of by using the bellow oppaste attribute into the input fields.
onpaste="return false;"
The book Java Generics and Collections has this information (pages: 188, 211, 222, 240).
List implementations:
get add contains next remove(0) iterator.remove
ArrayList O(1) O(1) O(n) O(1) O(n) O(n)
LinkedList O(n) O(1) O(n) O(1) O(1) O(1)
CopyOnWrite-ArrayList O(1) O(n) O(n) O(1) O(n) O(n)
Set implementations:
add contains next notes
HashSet O(1) O(1) O(h/n) h is the table capacity
LinkedHashSet O(1) O(1) O(1)
CopyOnWriteArraySet O(n) O(n) O(1)
EnumSet O(1) O(1) O(1)
TreeSet O(log n) O(log n) O(log n)
ConcurrentSkipListSet O(log n) O(log n) O(1)
Map implementations:
get containsKey next Notes
HashMap O(1) O(1) O(h/n) h is the table capacity
LinkedHashMap O(1) O(1) O(1)
IdentityHashMap O(1) O(1) O(h/n) h is the table capacity
EnumMap O(1) O(1) O(1)
TreeMap O(log n) O(log n) O(log n)
ConcurrentHashMap O(1) O(1) O(h/n) h is the table capacity
ConcurrentSkipListMap O(log n) O(log n) O(1)
Queue implementations:
offer peek poll size
PriorityQueue O(log n) O(1) O(log n) O(1)
ConcurrentLinkedQueue O(1) O(1) O(1) O(n)
ArrayBlockingQueue O(1) O(1) O(1) O(1)
LinkedBlockingQueue O(1) O(1) O(1) O(1)
PriorityBlockingQueue O(log n) O(1) O(log n) O(1)
DelayQueue O(log n) O(1) O(log n) O(1)
LinkedList O(1) O(1) O(1) O(1)
ArrayDeque O(1) O(1) O(1) O(1)
LinkedBlockingDeque O(1) O(1) O(1) O(1)
The bottom of the javadoc for the java.util package contains some good links:
Type "ctor" and press the TAB key twice this will add the default constructor automatically
Using Erik's answer, as a starting point. I found a simpler solution that worked for me.
In my ng-click function I have:
var the_string = 'lifeMeaning';
if ($scope[the_string] === undefined) {
//Valid in my application for first usage
$scope[the_string] = true;
} else {
$scope[the_string] = !$scope[the_string];
}
//$scope.$apply
I've tested it with and without $scope.$apply. Works correctly without it!
Yes, you could append ;Connection Timeout=30
to your connection string and specify the value you wish.
The timeout value set in the Connection Timeout
property is a time expressed in seconds. If this property isn't set, the timeout value for the connection is the default value (15 seconds).
Moreover, setting the timeout value to 0
, you are specifying that your attempt to connect waits an infinite time. As described in the documentation, this is something that you shouldn't set in your connection string:
A value of 0 indicates no limit, and should be avoided in a ConnectionString because an attempt to connect waits indefinitely.
As @Dan said "This answer becomes outdated fast. Use benchmarks to check the actual situation", there is one specific answer from jsperf that has not had an answer for itself: while:
var i = a.length;
while(i--) { b[i] = a[i]; }
had 960,589 ops/sec with the runnerup a.concat()
at 578,129 ops/sec, which is 60%.
This is the lastest Firefox (40) 64 bit.
@aleclarson created a new, more reliable benchmark.
You've accidentally set "Pause on Exceptions" to all/uncaught exceptions.
Go to the "Sources" tab. At the bottom toolbar, toggle the button that looks like the pause symbol surrounded by a circle (4th button from the left) until the color of the circle turns black to turn it off.
Upgrading my scikit-learn from 0.19.1 to 0.19.2 in anaconda installed on Ubuntu on Google VM instance:
First, check existing available packages with versions by using:
conda list
It will show different packages and their installed versions in the output. Here check for scikit-learn. e.g. for me, the output was:
scikit-learn 0.19.1 py36hedc7406_0
Now I want to Upgrade to 0.19.2 July 2018 release i.e. latest available version.
conda config --append channels conda-forge
conda install scikit-learn=0.19.2
As you are trying to upgrade to 0.17 version try the following command:
conda install scikit-learn=0.17
Now check the required version of the scikit-learn is installed correctly or not by using:
conda list
For me the Output was:
scikit-learn 0.19.2 py36_blas_openblasha84fab4_201 [blas_openblas] conda-forge
I tried following commands:
!conda update conda
!pip install -U scikit-learn
It will install the required packages also will show in the conda list
but if you try to import that package it will not work.
On the website http://scikit-learn.org/stable/install.html it is mentioned as: Warning To upgrade or uninstall scikit-learn installed with Anaconda or conda you should not use the pip.
gmail uses an encrypted connection. So, even after you establish a connection, you wont be able to send any email. The encryption is a little complex to manage. Try using openssl instead.
The thread below should help-
I know this has already been answered, but I have another possible solution.
If using jquery, you can do this.
First create a couple of extensions on jquery so you can resuse these as needed.
$.extend({
bypassDefaultSubmit: function (formName, newSubmitMethod) {
$('#'+formName).submit(function (event) {
newSubmitMethod();
event.preventDefault();
}
}
});
Next do something like this where you want to use it.
<script type="text/javascript">
/*if you want to validate the form on a submit call,
and you never want the form to be submitted via
a normal submit operation, or maybe you want handle it.
*/
$(function () {
$.bypassDefaultSubmit('form1', submit);
});
function submit(){
//do something, or nothing if you just want the validation
}
</script>
Many people will suggest you use MERGE
, but I caution you against it. By default, it doesn't protect you from concurrency and race conditions any more than multiple statements, but it does introduce other dangers:
http://www.mssqltips.com/sqlservertip/3074/use-caution-with-sql-servers-merge-statement/
Even with this "simpler" syntax available, I still prefer this approach (error handling omitted for brevity):
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
BEGIN TRANSACTION;
UPDATE dbo.table SET ... WHERE PK = @PK;
IF @@ROWCOUNT = 0
BEGIN
INSERT dbo.table(PK, ...) SELECT @PK, ...;
END
COMMIT TRANSACTION;
A lot of folks will suggest this way:
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
BEGIN TRANSACTION;
IF EXISTS (SELECT 1 FROM dbo.table WHERE PK = @PK)
BEGIN
UPDATE ...
END
ELSE
BEGIN
INSERT ...
END
COMMIT TRANSACTION;
But all this accomplishes is ensuring you may need to read the table twice to locate the row(s) to be updated. In the first sample, you will only ever need to locate the row(s) once. (In both cases, if no rows are found from the initial read, an insert occurs.)
Others will suggest this way:
BEGIN TRY
INSERT ...
END TRY
BEGIN CATCH
IF ERROR_NUMBER() = 2627
UPDATE ...
END CATCH
However, this is problematic if for no other reason than letting SQL Server catch exceptions that you could have prevented in the first place is much more expensive, except in the rare scenario where almost every insert fails. I prove as much here:
Not sure what you think you gain by having a single statement; I don't think you gain anything. MERGE
is a single statement but it still has to really perform multiple operations anyway - even though it makes you think it doesn't.
In java all elements(primitive integer types byte
short
, int
, long
) are initialised to 0 by default. You can save the loop.
Otherwise... if
getenforce
returns
Enforcing
Then maybe you should call
setenforce 0
mount -o rw,remount /system
setenforce 1
grep -r -e string directory
-r
is for recursive; -e
is optional but its argument specifies the regex to search for. Interestingly, POSIX grep
is not required to support -r
(or -R
), but I'm practically certain that System V in practice they (almost) all do. Some versions of grep
did, sogrep
support -R
as well as (or conceivably instead of) -r
; AFAICT, it means the same thing.
In my case, if I remove the the contentType
, I get the Internal Server Error.
This is what I got working after multiple attempts:
var request = $.ajax({
type: 'POST',
url: '/ControllerName/ActionName' ,
contentType: 'application/json; charset=utf-8',
data: JSON.stringify({ projId: 1, userId:1 }), //hard-coded value used for simplicity
dataType: 'json'
});
request.done(function(msg) {
alert(msg);
});
request.fail(function (jqXHR, textStatus, errorThrown) {
alert("Request failed: " + jqXHR.responseStart +"-" + textStatus + "-" + errorThrown);
});
And this is the controller code:
public JsonResult ActionName(int projId, int userId)
{
var obj = new ClassName();
var result = obj.MethodName(projId, userId); // variable used for readability
return Json(result, JsonRequestBehavior.AllowGet);
}
Please note, the case of ASP.NET is little different, we have to apply JSON.stringify()
to the data as mentioned in the update of this answer.
This Works
function saveBase64AsFile(base64, fileName) {
var link = document.createElement("a");
document.body.appendChild(link);
link.setAttribute("type", "hidden");
link.href = "data:text/plain;base64," + base64;
link.download = fileName;
link.click();
document.body.removeChild(link);
}
Based on the answer above but with some changes
You could read Google answer for it here: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml#Preincrement_and_Predecrement
So, main point is, what no difference for simple object, but for iterators and other template objects you should use preincrement.
EDITED:
There are no difference because you use simple type, so no side effects, and post- or preincrements executed after loop body, so no impact on value in loop body.
You could check it with such a loop:
for (int i = 0; i < 5; cout << "we still not incremented here: " << i << endl, i++)
{
cout << "inside loop body: " << i << endl;
}
As constraint has unpredictable name, you can write special script(DropConstraint) to remove it without knowing it's name (was tested at EF 6.1.3):
public override void Up()
{
DropConstraint();
AlterColumn("dbo.MyTable", "Rating", c => c.Double(nullable: false));
}
private void DropConstraint()
{
Sql(@"DECLARE @var0 nvarchar(128)
SELECT @var0 = name
FROM sys.default_constraints
WHERE parent_object_id = object_id(N'dbo.MyTable')
AND col_name(parent_object_id, parent_column_id) = 'Rating';
IF @var0 IS NOT NULL
EXECUTE('ALTER TABLE [dbo].[MyTable] DROP CONSTRAINT [' + @var0 + ']')");
}
public override void Down()
{
AlterColumn("dbo.MyTable", "Rating", c => c.Int(nullable: false));
}
<!-- Since angular2 stable release multiple directives are not supported on a single element(from the docs) still you can use it like below -->_x000D_
_x000D_
_x000D_
<ul class="list-group">_x000D_
<template ngFor let-item [ngForOf]="stuff" [ngForTrackBy]="trackBy_stuff">_x000D_
<li *ngIf="item.name" class="list-group-item">{{item.name}}</li>_x000D_
</template>_x000D_
</ul>
_x000D_
from urllib.request import urlopen, Request
Should solve everything
I think what you want is to swap out at runtime a version of your config file, if so create a copy of your config file (also give it the relevant extension like .Debug or .Release) that has the correct addresses (which gives you a debug version and a runtime version ) and create a postbuild step that copies the correct file depending on the build type.
Here is an example of a postbuild event that I've used in the past which overrides the output file with the correct version (debug/runtime)
copy "$(ProjectDir)ServiceReferences.ClientConfig.$(ConfigurationName)" "$(ProjectDir)ServiceReferences.ClientConfig" /Y
where : $(ProjectDir) is the project directory where the config files are located $(ConfigurationName) is the active configuration build type
EDIT: Please see Marc's answer for a detailed explanation on how to do this programmatically.
chartr
is also convenient for these types of substitutions:
chartr("_", "-", data1$c)
# [1] "A-B" "A-B" "A-B" "A-B" "A-C" "A-C" "A-C" "A-C" "A-C" "A-C"
Thus, you can just do:
data1$c <- chartr("_", "-", data1$c)
Now you can do (not sure if it's the same answer as evilpie):
MyObject = type('MyObject', (object,), {})
obj = MyObject()
obj.value = 42
In XML values in text() nodes.
If we write this
<numbers>1,2,3</numbers>
in element "numbers
" will be one text() node with value "1,2,3".
Native way to get many text() nodes in element is insert nodes of other types in text.
Other available types is element or comment() node.
Split with element node:
<numbers>3<_/>2<_/>1</numbers>
Split with comment() node:
<numbers>3<!---->2<!---->1</numbers>
We can select this values by this XPath
//numbers/text()
Select value by index
//numbers/text()[3]
Will return text() node with value "1"
You can also use CSS3 flexbox
layout, which is well supported nowadays.
.container {
display: flex;
flex-flow: row nowrap;
justify-content: space-between;
background:black;
height:400px;
width:450px;
}
.left {
flex: 0 0 300px;
background:blue;
height:200px;
}
.right {
flex: 0 1 100px;
background:green;
height:300px;
}
See Example (with legacy styles for maximum compatiblity) & Learn more about flexbox.
T-SQL is not asynchronous, so you really have no choice but to wait until SP2 ends. Luckily, that's what you want.
CREATE PROCEDURE SP1 AS
EXEC SP2
PRINT 'Done'
You need to set$final[$id]
to an array before adding elements to it. Intiialize it with either
$final[$id] = array();
$final[$id][0] = 3;
$final[$id]['link'] = "/".$row['permalink'];
$final[$id]['title'] = $row['title'];
or
$final[$id] = array(0 => 3);
$final[$id]['link'] = "/".$row['permalink'];
$final[$id]['title'] = $row['title'];
Simply you can set in php
file as
header("Access-Control-Allow-Origin: *");
header("Content-Type: application/json; charset=UTF-8");
now('milli'); // 120335360.999686
now('micro') ; // 120335360966.583
now('nano') ; // 120335360904333
Known that now
is :
const now = (unit) => {
const hrTime = process.hrtime();
switch (unit) {
case 'milli':
return hrTime[0] * 1000 + hrTime[1] / 1000000;
case 'micro':
return hrTime[0] * 1000000 + hrTime[1] / 1000;
case 'nano':
default:
return hrTime[0] * 1000000000 + hrTime[1];
}
};
Based on all your remarks here is my proposal that worked for me :
private final class CustomHttpServletRequest extends HttpServletRequestWrapper {
private final Map<String, String[]> queryParameterMap;
private final Charset requestEncoding;
public CustomHttpServletRequest(HttpServletRequest request) {
super(request);
queryParameterMap = getCommonQueryParamFromLegacy(request.getParameterMap());
String encoding = request.getCharacterEncoding();
requestEncoding = (encoding != null ? Charset.forName(encoding) : StandardCharsets.UTF_8);
}
private final Map<String, String[]> getCommonQueryParamFromLegacy(Map<String, String[]> paramMap) {
Objects.requireNonNull(paramMap);
Map<String, String[]> commonQueryParamMap = new LinkedHashMap<>(paramMap);
commonQueryParamMap.put(CommonQueryParams.PATIENT_ID, new String[] { paramMap.get(LEGACY_PARAM_PATIENT_ID)[0] });
commonQueryParamMap.put(CommonQueryParams.PATIENT_BIRTHDATE, new String[] { paramMap.get(LEGACY_PARAM_PATIENT_BIRTHDATE)[0] });
commonQueryParamMap.put(CommonQueryParams.KEYWORDS, new String[] { paramMap.get(LEGACY_PARAM_STUDYTYPE)[0] });
String lowerDateTime = null;
String upperDateTime = null;
try {
String studyDateTime = new SimpleDateFormat("yyyy-MM-dd").format(new SimpleDateFormat("dd-MM-yyyy").parse(paramMap.get(LEGACY_PARAM_STUDY_DATE_TIME)[0]));
lowerDateTime = studyDateTime + "T23:59:59";
upperDateTime = studyDateTime + "T00:00:00";
} catch (ParseException e) {
LOGGER.error("Can't parse StudyDate from query parameters : {}", e.getLocalizedMessage());
}
commonQueryParamMap.put(CommonQueryParams.LOWER_DATETIME, new String[] { lowerDateTime });
commonQueryParamMap.put(CommonQueryParams.UPPER_DATETIME, new String[] { upperDateTime });
legacyQueryParams.forEach(commonQueryParamMap::remove);
return Collections.unmodifiableMap(commonQueryParamMap);
}
@Override
public String getParameter(String name) {
String[] params = queryParameterMap.get(name);
return params != null ? params[0] : null;
}
@Override
public String[] getParameterValues(String name) {
return queryParameterMap.get(name);
}
@Override
public Map<String, String[]> getParameterMap() {
return queryParameterMap; // unmodifiable to uphold the interface contract.
}
@Override
public Enumeration<String> getParameterNames() {
return Collections.enumeration(queryParameterMap.keySet());
}
@Override
public String getQueryString() {
// @see : https://stackoverflow.com/a/35831692/9869013
// return queryParameterMap.entrySet().stream().flatMap(entry -> Stream.of(entry.getValue()).map(value -> entry.getKey() + "=" + value)).collect(Collectors.joining("&")); // without encoding !!
return queryParameterMap.entrySet().stream().flatMap(entry -> encodeMultiParameter(entry.getKey(), entry.getValue(), requestEncoding)).collect(Collectors.joining("&"));
}
private Stream<String> encodeMultiParameter(String key, String[] values, Charset encoding) {
return Stream.of(values).map(value -> encodeSingleParameter(key, value, encoding));
}
private String encodeSingleParameter(String key, String value, Charset encoding) {
return urlEncode(key, encoding) + "=" + urlEncode(value, encoding);
}
private String urlEncode(String value, Charset encoding) {
try {
return URLEncoder.encode(value, encoding.name());
} catch (UnsupportedEncodingException e) {
throw new IllegalArgumentException("Cannot url encode " + value, e);
}
}
@Override
public ServletInputStream getInputStream() throws IOException {
throw new UnsupportedOperationException("getInputStream() is not implemented in this " + CustomHttpServletRequest.class.getSimpleName() + " wrapper");
}
}
note : queryString() requires to process ALL the values for each KEY and don't forget to encodeUrl() when adding your own param values, if required
As a limitation, if you call request.getParameterMap() or any method that would call request.getReader() and begin reading, you will prevent any further calls to request.setCharacterEncoding(...)
select convert(varchar(10), cast(fmdate as date), 101) from sery
Without cast I was not getting fmdate converted, so fmdate was a string.
I found this helpful...
http://www.cmake.org/pipermail/cmake/2011-June/045222.html
From their example:
ADD_LIBRARY(boost_unit_test_framework STATIC IMPORTED)
SET_TARGET_PROPERTIES(boost_unit_test_framework PROPERTIES IMPORTED_LOCATION /usr/lib/libboost_unit_test_framework.a)
TARGET_LINK_LIBRARIES(mytarget A boost_unit_test_framework C)
Or you could use the known solution to this problem and use SSL. Self-signed certs are free and its a personal project right?
WebElement drop_down =driver.findElement(By.id("Category"));
Select se = new Select(drop_down);
for(int i=0 ;i<se.getOptions().size(); i++)
System.out.println(se.getOptions().get(i).getAttribute("value"));
Also, if you're using Rails 3 or newer you don't have to use the up
and down
methods. You can just use change
:
class ChangeFormatInMyTable < ActiveRecord::Migration
def change
change_column :my_table, :my_column, :my_new_type
end
end
the third parameter should be like array('selected' =>value)
try it:
const cors = require('cors')
const corsOptions = {
origin: 'http://localhost:4200',
credentials: true,
}
app.use(cors(corsOptions));
Office 2007
Right click the figure, select Insert Caption, Select Numbering, check box next to 'Include chapter number', select OK, Select OK again, then you figure identifier should be updated.
Given a parent class named Parent
and a child class named Child
, you can do something like this:
class Parent {
public:
virtual void print(int x);
};
class Child : public Parent {
void print(int x) override;
};
void Parent::print(int x) {
// some default behavior
}
void Child::print(int x) {
// use Parent's print method; implicitly passes 'this' to Parent::print
Parent::print(x);
}
Note that Parent
is the class's actual name and not a keyword.
Shows all your disks; total, used and free capacity. You can alter the output by various command-line options.
You can get it from http://www.paulsadowski.com/WSH/cmdprogs.htm, http://unxutils.sourceforge.net/ or somewhere else. It's a standard unix-util like du.
df -h
will show all your drive's used and available disk space. For example:
M:\>df -h
Filesystem Size Used Avail Use% Mounted on
C:/cygwin/bin 932G 78G 855G 9% /usr/bin
C:/cygwin/lib 932G 78G 855G 9% /usr/lib
C:/cygwin 932G 78G 855G 9% /
C: 932G 78G 855G 9% /cygdrive/c
E: 1.9T 1.3T 621G 67% /cygdrive/e
F: 1.9T 201G 1.7T 11% /cygdrive/f
H: 1.5T 524G 938G 36% /cygdrive/h
M: 1.5T 524G 938G 36% /cygdrive/m
P: 98G 67G 31G 69% /cygdrive/p
R: 98G 14G 84G 15% /cygdrive/r
Cygwin is available for free from: https://www.cygwin.com/ It adds many powerful tools to the command prompt. To get just the available space on drive M (as mapped in windows to a shared drive), one could enter in:
M:\>df -h | grep M: | awk '{print $4}'
Create an Android app using Eclipse.
Create a layout that has a <WebView>
control.
Move your HTML code to /assets
folder.
Load webview with your file:///android_asset/ file.
And you have an android app!
If you are using Java 8+ and need a 2 dimensional Array
, perhaps for TestNG data providers, you can try:
map.entrySet()
.stream()
.map(e -> new Object[]{e.getKey(), e.getValue()})
.toArray(Object[][]::new);
If your Object
s are String
s and you need a String[][]
, try:
map.entrySet()
.stream()
.map(e -> new String[]{e.getKey(), e.getValue().toString()})
.toArray(String[][]::new);
I tried to send/add input tag's values into JavaScript variable which worked well for me, here is the code:
<!DOCTYPE html>
<html>
<head>
<script type="text/javascript">
function changef()
{
var ctext=document.getElementById("c").value;
document.writeln(ctext);
}
</script>
</head>
<body>
<input type="text" id="c" onchange="changef"();>
<button type="button" onclick="changef()">click</button>
</body>
</html>
If in case you are using Python 3.x, you have to use
txt_entry = Entry(root)
txt_entry.pack()
txt_entry.delete(0, tkinter.END)
You Must use
-(void)viewWillAppear:(BOOL)animated
and set your entries like you want...
All the previous answers are good to me. But a straight forward answer on my side would come from https://github.com/kubernetes/dashboard/wiki/Creating-sample-user#bearer-token. Just use kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}')
. You will have many values for some keys (Name
, Namespace
, Labels
, ..., token
). The most important is the token
that corresponds to your name. copy that token and paste it in the token box. Hope this helps.
It's not at all related to "tidyr" and "dplyr", but here's another option to consider: merged.stack
from my "splitstackshape" package, V1.4.0 and above.
library(splitstackshape)
merged.stack(df, id.vars = c("id", "time"),
var.stubs = c("Q3.2.", "Q3.3."),
sep = "var.stubs")
# id time .time_1 Q3.2. Q3.3.
# 1: 1 2009-01-01 1. -0.62645381 1.35867955
# 2: 1 2009-01-01 2. 1.51178117 -0.16452360
# 3: 1 2009-01-01 3. 0.91897737 0.39810588
# 4: 2 2009-01-02 1. 0.18364332 -0.10278773
# 5: 2 2009-01-02 2. 0.38984324 -0.25336168
# 6: 2 2009-01-02 3. 0.78213630 -0.61202639
# 7: 3 2009-01-03 1. -0.83562861 0.38767161
# <<:::SNIP:::>>
# 24: 8 2009-01-08 3. -1.47075238 -1.04413463
# 25: 9 2009-01-09 1. 0.57578135 1.10002537
# 26: 9 2009-01-09 2. 0.82122120 -0.11234621
# 27: 9 2009-01-09 3. -0.47815006 0.56971963
# 28: 10 2009-01-10 1. -0.30538839 0.76317575
# 29: 10 2009-01-10 2. 0.59390132 0.88110773
# 30: 10 2009-01-10 3. 0.41794156 -0.13505460
# id time .time_1 Q3.2. Q3.3.
you have defined the public dir in app root/public
app.use(express.static(__dirname + '/public'));
so you have to use:
./css/main.css
Let's assume this is your class:
class Test
{
private $baz = 1;
public function foo() { ... }
public function bar()
{
printf("baz = %d\n", $this->baz);
}
public static function staticMethod() { echo "static method\n"; }
}
From within the foo()
method, let's look at the different options:
$this->staticMethod();
So that calls staticMethod()
as an instance method, right? It does not. This is because the method is declared as public static
the interpreter will call it as a static method, so it will work as expected. It could be argued that doing so makes it less obvious from the code that a static method call is taking place.
$this::staticMethod();
Since PHP 5.3 you can use $var::method()
to mean <class-of-$var>::
; this is quite convenient, though the above use-case is still quite unconventional. So that brings us to the most common way of calling a static method:
self::staticMethod();
Now, before you start thinking that the ::
is the static call operator, let me give you another example:
self::bar();
This will print baz = 1
, which means that $this->bar()
and self::bar()
do exactly the same thing; that's because ::
is just a scope resolution operator. It's there to make parent::
, self::
and static::
work and give you access to static variables; how a method is called depends on its signature and how the caller was called.
To see all of this in action, see this 3v4l.org output.
If you don't want to reference Forms you can use interop to get the cursor position:
using System.Runtime.InteropServices;
using System.Windows; // Or use whatever point class you like for the implicit cast operator
/// <summary>
/// Struct representing a point.
/// </summary>
[StructLayout(LayoutKind.Sequential)]
public struct POINT
{
public int X;
public int Y;
public static implicit operator Point(POINT point)
{
return new Point(point.X, point.Y);
}
}
/// <summary>
/// Retrieves the cursor's position, in screen coordinates.
/// </summary>
/// <see>See MSDN documentation for further information.</see>
[DllImport("user32.dll")]
public static extern bool GetCursorPos(out POINT lpPoint);
public static Point GetCursorPosition()
{
POINT lpPoint;
GetCursorPos(out lpPoint);
// NOTE: If you need error handling
// bool success = GetCursorPos(out lpPoint);
// if (!success)
return lpPoint;
}
But why don't I have to install a certificate locally for the site?
Well the code that you are using is explicitly designed to accept the certificate without doing any checks whatsoever. This is not good practice ... but if that is what you want to do, then (obviously) there is no need to install a certificate that your code is explicitly ignoring.
Shouldn't I have to install a certificate locally and load it for this program or is it downloaded behind the covers?
No, and no. See above.
Is the traffic between the client to the remote site still encrypted in transmission?
Yes it is. However, the problem is that since you have told it to trust the server's certificate without doing any checks, you don't know if you are talking to the real server, or to some other site that is pretending to be the real server. Whether this is a problem depends on the circumstances.
If we used the browser as an example, typically a browser doesn't ask the user to explicitly install a certificate for each ssl site visited.
The browser has a set of trusted root certificates pre-installed. Most times, when you visit an "https" site, the browser can verify that the site's certificate is (ultimately, via the certificate chain) secured by one of those trusted certs. If the browser doesn't recognize the cert at the start of the chain as being a trusted cert (or if the certificates are out of date or otherwise invalid / inappropriate), then it will display a warning.
Java works the same way. The JVM's keystore has a set of trusted certificates, and the same process is used to check the certificate is secured by a trusted certificate.
Does the java https client api support some type of mechanism to download certificate information automatically?
No. Allowing applications to download certificates from random places, and install them (as trusted) in the system keystore would be a security hole.
You can also use onBackPressed by following ways using customized Toast:
customized_toast.xml
<?xml version="1.0" encoding="utf-8"?>
<TextView
xmlns:android="http://schemas.android.com/apk/res/android"
android:id="@+id/txtMessage"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:drawableStart="@drawable/ic_white_exit_small"
android:drawableLeft="@drawable/ic_white_exit_small"
android:drawablePadding="8dp"
android:paddingTop="8dp"
android:paddingBottom="8dp"
android:paddingLeft="16dp"
android:paddingRight="16dp"
android:gravity="center"
android:textColor="@android:color/white"
android:textSize="16sp"
android:text="Press BACK again to exit.."
android:background="@drawable/curve_edittext"/>
MainActivity.java
@Override
public void onBackPressed() {
if (doubleBackToExitPressedOnce) {
android.os.Process.killProcess(Process.myPid());
System.exit(1);
return;
}
this.doubleBackToExitPressedOnce = true;
Toast toast = new Toast(Dashboard.this);
View view = getLayoutInflater().inflate(R.layout.toast_view,null);
toast.setView(view);
toast.setDuration(Toast.LENGTH_SHORT);
int margin = getResources().getDimensionPixelSize(R.dimen.toast_vertical_margin);
toast.setGravity(Gravity.BOTTOM | Gravity.CENTER_VERTICAL, 0, margin);
toast.show();
new Handler().postDelayed(new Runnable() {
@Override
public void run() {
doubleBackToExitPressedOnce=false;
}
}, 2000);
}
You can use jquery load for that.
<script type="text/javascript">
$(document).ready(function(e) {
$('#header').load('name.html',function(){alert('loaded')});
});
</script>
Don't forget to include jquery library befor above code.
You need to add @Valid to each member variable, which was also an object that contained validation constraints.
Try placing the host name (db01.mysql.vm.MyHostingServer.net
) in your windows host (C:\windows\system32\drivers\etc\host
) file along with it's IP address and port number and see if that helps.
Use Random.nextInt(int).
In your case it would look something like this:
a[i][j] = r.nextInt(101);
using System;
using System.Runtime.InteropServices;
namespace SomeProject
{
class GuiRedirect
{
[DllImport("kernel32.dll", SetLastError = true)]
private static extern bool AttachConsole(int dwProcessId);
[DllImport("kernel32.dll", SetLastError = true)]
private static extern IntPtr GetStdHandle(StandardHandle nStdHandle);
[DllImport("kernel32.dll", SetLastError = true)]
private static extern bool SetStdHandle(StandardHandle nStdHandle, IntPtr handle);
[DllImport("kernel32.dll", SetLastError = true)]
private static extern FileType GetFileType(IntPtr handle);
private enum StandardHandle : uint
{
Input = unchecked((uint)-10),
Output = unchecked((uint)-11),
Error = unchecked((uint)-12)
}
private enum FileType : uint
{
Unknown = 0x0000,
Disk = 0x0001,
Char = 0x0002,
Pipe = 0x0003
}
private static bool IsRedirected(IntPtr handle)
{
FileType fileType = GetFileType(handle);
return (fileType == FileType.Disk) || (fileType == FileType.Pipe);
}
public static void Redirect()
{
if (IsRedirected(GetStdHandle(StandardHandle.Output)))
{
var initialiseOut = Console.Out;
}
bool errorRedirected = IsRedirected(GetStdHandle(StandardHandle.Error));
if (errorRedirected)
{
var initialiseError = Console.Error;
}
AttachConsole(-1);
if (!errorRedirected)
SetStdHandle(StandardHandle.Error, GetStdHandle(StandardHandle.Output));
}
}
Git offers a range of difftools pre-configured "out-of-the-box" (kdiff3, kompare, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, diffuse, opendiff, p4merge and araxis), and also allows you to specify your own. To use one of the pre-configured difftools (for example, "vimdiff"), you add the following lines to your ~/.gitconfig
:
[diff]
tool = vimdiff
Now, you will be able to run "git difftool" and use your tool of choice.
Specifying your own difftool, on the other hand, takes a little bit more work, see How do I view 'git diff' output with my preferred diff tool/ viewer?
Setters and getters are used to replace directly accessing member variables from external classes. if you use a setter and getter in accessing a property, you can include initialization, error checking, complex transformations, etc. Some examples:
private String x;
public void setX(String newX) {
if (newX == null) {
x = "";
} else {
x = newX;
}
}
public String getX() {
if (x == null) {
return "";
} else {
return x;
}
}
mapfile
and readarray
(which are synonymous) are available in Bash version 4 and above. If you have an older version of Bash, you can use a loop to read the file into an array:
arr=()
while IFS= read -r line; do
arr+=("$line")
done < file
In case the file has an incomplete (missing newline) last line, you could use this alternative:
arr=()
while IFS= read -r line || [[ "$line" ]]; do
arr+=("$line")
done < file
Related:
all multy key's probably fail, cause the put([key1, key2], val) and the get([null, key2]) end up using the equals of [key1, key2] and [null, key2]. If the backing map doesnt contains hash buckets per key then lookups are real slow to.
i think the way to go is using a index decorator (see the key1, key2 examples above) and if the extra index key's are properties of the stored value you can use the property name's and reflection to build the secondairy maps when you put(key, val) and add an extra method get(propertyname, propertyvalue) to use that index.
the return type of the get(propertyname, propertyvalue) could be a Collection so even none unique key's are indexed....
It's all about context, and also who is responsible for handling duplicates in requests (server or client or both)
If server just point the duplicate, look at 4xx:
For implicit handling of duplicates, look at 2XX:
if the server is expected to return something, look at 3XX:
when the server is able to point the existing resource, it implies a redirection.
If the above is not enough, it's always a good practice to prepare some error message in the body of the response.
All you have to do is create a subset of your dataframe where the isin method evaluates to False:
df = df[df['Column Name'].isin(['Value']) == False]
you should not use Nested List in List.
List<List<T>>
is not legal, even if T were a defined type.
There's a fairly simple and (IMO) elegant approach, at least for durations of less than 24 hours:
DateTimeFormatter.ISO_LOCAL_TIME.format(value.addTo(LocalTime.of(0, 0)))
Formatters need a temporal object to format, so you can create one by adding the duration to a LocalTime of 00:00 (i.e. midnight). This will give you a LocalTime representing the duration from midnight to that time, which is then easy to format in standard HH:mm:ss notation. This has the advantage of not needing an external library, and uses the java.time library to do the calculation, rather than manually calculating the hours, minutes and seconds.
If youre using a .ssh/config file try to
chmod 0400 .ssh/config
then:
chmod 0400 .ssh/<<KEYFILE_PATH>>
Yes, it is. Just create files in the windows explorer and git automatically detects these files as currently untracked. Then add it with the command you already mentioned.
git add
does not create any files. See also http://gitref.org/basic/#add
Github probably creates the file with touch
and adds the file for tracking automatically. You can do this on the bash
as well.
Late answer, but for python>=3.6
you can use:
import dload
dload.save(url)
Install dload
with:
pip3 install dload
There is a picture show all markers' name and description, i hope it will help you.
import matplotlib.pylab as plt
markers=['.',',','o','v','^','<','>','1','2','3','4','8','s','p','P','*','h','H','+','x','X','D','d','|','_']
descriptions=['point', 'pixel', 'circle', 'triangle_down', 'triangle_up','triangle_left', 'triangle_right', 'tri_down', 'tri_up', 'tri_left','tri_right', 'octagon', 'square', 'pentagon', 'plus (filled)','star', 'hexagon1', 'hexagon2', 'plus', 'x', 'x (filled)','diamond', 'thin_diamond', 'vline', 'hline']
x=[]
y=[]
for i in range(5):
for j in range(5):
x.append(i)
y.append(j)
plt.figure()
for i,j,m,l in zip(x,y,markers,descriptions):
plt.scatter(i,j,marker=m)
plt.text(i-0.15,j+0.15,s=m+' : '+l)
plt.axis([-0.1,4.8,-0.1,4.5])
plt.tight_layout()
plt.axis('off')
plt.show()
It will have already gone back before it executes the reload.
You would be better off to replace:
window.history.back();
location.reload();
with:
window.location.replace("pagehere.html");
I don't think you can at present: see this article on the Postgresql wiki.
The three workarounds from this article are:
You can find every file what is created/modified in the last day, use this example:
find /directory -newermt $(date +%Y-%m-%d -d '1 day ago') -type f -print
for finding everything in the last week, use '1 week ago' or '7 day ago' anything you want
This is what I am doing:
string tStamp = String.Format("{0:yyyyMMdd.HHmmss}", DateTime.Now); string ProcID = Process.GetCurrentProcess().Id.ToString(); string tmpFolder = System.IO.Path.GetTempPath(); string outFile = tmpFolder + ProcID + "_" + tStamp + ".txt";
Using nextline and System.in.read as often proposed requires the user to hit enter after typing a character. However, people searching for an answer to this question, may also be interested in directly respond to a key press in a console!
I found a solution to do so using jline3, wherein we first change the terminal into rawmode to directly respond to keys, and then wait for the next entered character:
var terminal = TerminalBuilder.terminal()
terminal.enterRawMode()
var reader = terminal.reader()
var c = reader.read()
<dependency>
<groupId>org.jline</groupId>
<artifactId>jline</artifactId>
<version>3.12.3</version>
</dependency>
Query syntax:
var count = (from o in context.MyContainer
where o.ID == '1'
from t in o.MyTable
select t).Count();
Method syntax:
var count = context.MyContainer
.Where(o => o.ID == '1')
.SelectMany(o => o.MyTable)
.Count()
Both generate the same SQL query.
For generic use (run python/haskell/ruby/C++... from vim based on the filetype
), there's a nice plugin called vim-quickrun. It supports many programming languages by default. It is easily configurable, too, so one can define preferred behaviours for any filetype if needed. The github repo does not have a fancy readme, but it is well documented with the doc file.
You may try this way. just use a function to get your object
def get_object(self, id):
try:
return Comment.objects.get(pk=id)
except Comment.DoesNotExist:
return False
just create an extension function to the fragment
fun Fragment.onBackPressedAction(action: () -> Boolean) {
requireActivity().onBackPressedDispatcher.addCallback(viewLifecycleOwner, object :
OnBackPressedCallback(true) {
override fun handleOnBackPressed() {
this.isEnabled = action()
if (!this.isEnabled) {
requireActivity().onBackPressed()
}
}
})
}
and after in the fragment put the code into onCreateView (the action must return false to call the activity onBackPressed)
onBackPressedAction { //do something }
I would do this slightly different by applying both the UNPIVOT
and the PIVOT
functions to get the final result. The unpivot takes the values from both the totalcount
and totalamount
columns and places them into one column with multiple rows. You can then pivot on those results.:
select chardate,
Australia_totalcount as [Australia # of Transactions],
Australia_totalamount as [Australia Total $ Amount],
Austria_totalcount as [Austria # of Transactions],
Austria_totalamount as [Austria Total $ Amount]
from
(
select
numericmonth,
chardate,
country +'_'+col col,
value
from
(
select numericmonth,
country,
chardate,
cast(totalcount as numeric(10, 2)) totalcount,
cast(totalamount as numeric(10, 2)) totalamount
from mytransactions
) src
unpivot
(
value
for col in (totalcount, totalamount)
) unpiv
) s
pivot
(
sum(value)
for col in (Australia_totalcount, Australia_totalamount,
Austria_totalcount, Austria_totalamount)
) piv
order by numericmonth
See SQL Fiddle with Demo.
If you have an unknown number of country
names, then you can use dynamic SQL:
DECLARE @cols AS NVARCHAR(MAX),
@colsName AS NVARCHAR(MAX),
@query AS NVARCHAR(MAX)
select @cols = STUFF((SELECT distinct ',' + QUOTENAME(country +'_'+c.col)
from mytransactions
cross apply
(
select 'TotalCount' col
union all
select 'TotalAmount'
) c
FOR XML PATH(''), TYPE
).value('.', 'NVARCHAR(MAX)')
,1,1,'')
select @colsName
= STUFF((SELECT distinct ', ' + QUOTENAME(country +'_'+c.col)
+' as ['
+ country + case when c.col = 'TotalCount' then ' # of Transactions]' else 'Total $ Amount]' end
from mytransactions
cross apply
(
select 'TotalCount' col
union all
select 'TotalAmount'
) c
FOR XML PATH(''), TYPE
).value('.', 'NVARCHAR(MAX)')
,1,1,'')
set @query
= 'SELECT chardate, ' + @colsName + '
from
(
select
numericmonth,
chardate,
country +''_''+col col,
value
from
(
select numericmonth,
country,
chardate,
cast(totalcount as numeric(10, 2)) totalcount,
cast(totalamount as numeric(10, 2)) totalamount
from mytransactions
) src
unpivot
(
value
for col in (totalcount, totalamount)
) unpiv
) s
pivot
(
sum(value)
for col in (' + @cols + ')
) p
order by numericmonth'
execute(@query)
Both give the result:
| CHARDATE | AUSTRALIA # OF TRANSACTIONS | AUSTRALIA TOTAL $ AMOUNT | AUSTRIA # OF TRANSACTIONS | AUSTRIA TOTAL $ AMOUNT |
--------------------------------------------------------------------------------------------------------------------------------------
| Jul-12 | 36 | 699.96 | 11 | 257.82 |
| Aug-12 | 44 | 1368.71 | 5 | 126.55 |
| Sep-12 | 52 | 1161.33 | 7 | 92.11 |
| Oct-12 | 50 | 1099.84 | 12 | 103.56 |
| Nov-12 | 38 | 1078.94 | 21 | 377.68 |
| Dec-12 | 63 | 1668.23 | 3 | 14.35 |
The above suggestions are pretty good, but I think most people just want a ready made solution, with no dependencies on external packages, but is also reusable.
I got the best points of all the above, and made it into a function, along with a test cases.
To use it, just copy the lines under "def update_progress(progress)" but not the test script. Don't forget to import sys. Call this whenever you need to display or update the progress bar.
This works by directly sending the "\r" symbol to console to move cursor back to the start. "print" in python does not recongise the above symbol for this purpose, hence we need 'sys'
import time, sys
# update_progress() : Displays or updates a console progress bar
## Accepts a float between 0 and 1. Any int will be converted to a float.
## A value under 0 represents a 'halt'.
## A value at 1 or bigger represents 100%
def update_progress(progress):
barLength = 10 # Modify this to change the length of the progress bar
status = ""
if isinstance(progress, int):
progress = float(progress)
if not isinstance(progress, float):
progress = 0
status = "error: progress var must be float\r\n"
if progress < 0:
progress = 0
status = "Halt...\r\n"
if progress >= 1:
progress = 1
status = "Done...\r\n"
block = int(round(barLength*progress))
text = "\rPercent: [{0}] {1}% {2}".format( "#"*block + "-"*(barLength-block), progress*100, status)
sys.stdout.write(text)
sys.stdout.flush()
# update_progress test script
print "progress : 'hello'"
update_progress("hello")
time.sleep(1)
print "progress : 3"
update_progress(3)
time.sleep(1)
print "progress : [23]"
update_progress([23])
time.sleep(1)
print ""
print "progress : -10"
update_progress(-10)
time.sleep(2)
print ""
print "progress : 10"
update_progress(10)
time.sleep(2)
print ""
print "progress : 0->1"
for i in range(101):
time.sleep(0.1)
update_progress(i/100.0)
print ""
print "Test completed"
time.sleep(10)
This is what the result of the test script shows (The last progress bar animates):
progress : 'hello'
Percent: [----------] 0% error: progress var must be float
progress : 3
Percent: [##########] 100% Done...
progress : [23]
Percent: [----------] 0% error: progress var must be float
progress : -10
Percent: [----------] 0% Halt...
progress : 10
Percent: [##########] 100% Done...
progress : 0->1
Percent: [##########] 100% Done...
Test completed
Read these tutorials Asp.net Update Panel and Introduction to the UpdatePanel Control
Simple and understandable
If you are using Spring Boot, you can set the following property in application.properties file. spring.jackson.serialization.FAIL_ON_EMPTY_BEANS=false
You'll have to have a ContextLoaderListener in your web.xml - It loads your configuration files.
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
You need to understand the difference between Web application context and root application context .
In the web MVC framework, each DispatcherServlet has its own WebApplicationContext, which inherits all the beans already defined in the root WebApplicationContext. These inherited beans defined can be overridden in the servlet-specific scope, and new scope-specific beans can be defined local to a given servlet instance.
The dispatcher servlet's application context is a web application context which is only applicable for the Web classes . You cannot use these for your middle tier layers . These need a global app context using ContextLoaderListener .
Read the spring reference here for spring mvc .
I suspect that what's happened may be that you've deleted the files that you modified (because you didn't care about those changes) and now git is taking the deletion to be a change.
Here is an approach that moves your changes out of your working copy and into the "stash" (retrievable should it actually turn out that you ever need them again), so you can then pull the latest changes down from the upstream.
git stash
git pull
If you ever want to retrieve your files (potential conflicts with upstream changes and all), run a git stash apply
to stick those changes on top of your code. That way, you have an "undo" approach.
This question was bugging me - it's a common enough problem that a good solution should already exist, something better than the vector of vectors or rolling your own array indexing.
When something ought to exist in C++ but doesn't, the first place to look is boost.org. There I found the Boost Multidimensional Array Library, multi_array
. It even includes a multi_array_ref
class that can be used to wrap your own one-dimensional array buffer.
Within your <jre location>\lib\security\java.policy
try adding:
grant {
permission java.security.AllPermission;
};
And see if it allows you. If so, you will have to add more granular permissions.
See:
Java 8 Documentation for java.policy files
and
http://java.sun.com/developer/onlineTraining/Programming/JDCBook/appA.html
android:layout_weight=".YOURVALUE" is best way to implement in percentage
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="fill_parent"
android:layout_height="fill_parent"
android:orientation="vertical" >
<TextView
android:id="@+id/logTextBox"
android:layout_width="fill_parent"
android:layout_height="0dp"
android:layout_weight=".20"
android:maxLines="500"
android:scrollbars="vertical"
android:singleLine="false"
android:text="@string/logText" >
</TextView>
</LinearLayout>
You can also set the test env in your test file as follows:
/* eslint-env jest */
describe(() => {
/* ... */
})
If we consider common scenarios where this exception can be thrown, accessing properties withing object at the top.
Ex:
string postalcode=Customer.Address.PostalCode;
//if customer or address is null , this will through exeption
in here , if address is null , then you will get NullReferenceException.
So, as a practice we should always use null check, before accessing properties in such objects (specially in generic)
string postalcode=Customer?.Address?.PostalCode;
//if customer or address is null , this will return null, without through a exception
The error means that the string you're trying to parse an integer from doesn't actually contain a valid integer.
It's extremely unlikely that the text boxes will contain a valid integer immediately when the form is created - which is where you're getting the integer values. It would make much more sense to update a
and b
in the button click events (in the same way that you are in the constructor). Also, check out the Int.TryParse
method - it's much easier to use if the string might not actually contain an integer - it doesn't throw an exception so it's easier to recover from.
If you get an error message like
An unhandled exception of type 'System.NullReferenceException' occurred in System.Windows.Forms.dll
if you work with SortableBindingList, your code probably uses some loops over DataGridView rows and also try to access the empty last row! (BindingSource = null)
If you don't need to allow the user to add new rows directly in the DataGridView this line of code easily solve the issue:
InitializeComponent();
m_dataGridView.AllowUserToAddRows = false; // after components initialized
...
tl;dr:
concat
and append
currently sort the non-concatenation index (e.g. columns if you're adding rows) if the columns don't match. In pandas 0.23 this started generating a warning; pass the parameter sort=True
to silence it. In the future the default will change to not sort, so it's best to specify either sort=True
or False
now, or better yet ensure that your non-concatenation indices match.
The warning is new in pandas 0.23.0:
In a future version of pandas pandas.concat()
and DataFrame.append()
will no longer sort the non-concatenation axis when it is not already aligned. The current behavior is the same as the previous (sorting), but now a warning is issued when sort is not specified and the non-concatenation axis is not aligned,
link.
More information from linked very old github issue, comment by smcinerney :
When concat'ing DataFrames, the column names get alphanumerically sorted if there are any differences between them. If they're identical across DataFrames, they don't get sorted.
This sort is undocumented and unwanted. Certainly the default behavior should be no-sort.
After some time the parameter sort
was implemented in pandas.concat
and DataFrame.append
:
sort : boolean, default None
Sort non-concatenation axis if it is not already aligned when join is 'outer'. The current default of sorting is deprecated and will change to not-sorting in a future version of pandas.
Explicitly pass sort=True to silence the warning and sort. Explicitly pass sort=False to silence the warning and not sort.
This has no effect when join='inner', which already preserves the order of the non-concatenation axis.
So if both DataFrames have the same columns in the same order, there is no warning and no sorting:
df1 = pd.DataFrame({"a": [1, 2], "b": [0, 8]}, columns=['a', 'b'])
df2 = pd.DataFrame({"a": [4, 5], "b": [7, 3]}, columns=['a', 'b'])
print (pd.concat([df1, df2]))
a b
0 1 0
1 2 8
0 4 7
1 5 3
df1 = pd.DataFrame({"a": [1, 2], "b": [0, 8]}, columns=['b', 'a'])
df2 = pd.DataFrame({"a": [4, 5], "b": [7, 3]}, columns=['b', 'a'])
print (pd.concat([df1, df2]))
b a
0 0 1
1 8 2
0 7 4
1 3 5
But if the DataFrames have different columns, or the same columns in a different order, pandas returns a warning if no parameter sort
is explicitly set (sort=None
is the default value):
df1 = pd.DataFrame({"a": [1, 2], "b": [0, 8]}, columns=['b', 'a'])
df2 = pd.DataFrame({"a": [4, 5], "b": [7, 3]}, columns=['a', 'b'])
print (pd.concat([df1, df2]))
FutureWarning: Sorting because non-concatenation axis is not aligned.
a b
0 1 0
1 2 8
0 4 7
1 5 3
print (pd.concat([df1, df2], sort=True))
a b
0 1 0
1 2 8
0 4 7
1 5 3
print (pd.concat([df1, df2], sort=False))
b a
0 0 1
1 8 2
0 7 4
1 3 5
If the DataFrames have different columns, but the first columns are aligned - they will be correctly assigned to each other (columns a
and b
from df1
with a
and b
from df2
in the example below) because they exist in both. For other columns that exist in one but not both DataFrames, missing values are created.
Lastly, if you pass sort=True
, columns are sorted alphanumerically. If sort=False
and the second DafaFrame has columns that are not in the first, they are appended to the end with no sorting:
df1 = pd.DataFrame({"a": [1, 2], "b": [0, 8], 'e':[5, 0]},
columns=['b', 'a','e'])
df2 = pd.DataFrame({"a": [4, 5], "b": [7, 3], 'c':[2, 8], 'd':[7, 0]},
columns=['c','b','a','d'])
print (pd.concat([df1, df2]))
FutureWarning: Sorting because non-concatenation axis is not aligned.
a b c d e
0 1 0 NaN NaN 5.0
1 2 8 NaN NaN 0.0
0 4 7 2.0 7.0 NaN
1 5 3 8.0 0.0 NaN
print (pd.concat([df1, df2], sort=True))
a b c d e
0 1 0 NaN NaN 5.0
1 2 8 NaN NaN 0.0
0 4 7 2.0 7.0 NaN
1 5 3 8.0 0.0 NaN
print (pd.concat([df1, df2], sort=False))
b a e c d
0 0 1 5.0 NaN NaN
1 8 2 0.0 NaN NaN
0 7 4 NaN 2.0 7.0
1 3 5 NaN 8.0 0.0
In your code:
placement_by_video_summary = placement_by_video_summary.drop(placement_by_video_summary_new.index)
.append(placement_by_video_summary_new, sort=True)
.sort_index()
Get the entire record as you want using the condition with inner select query.
SELECT *
FROM member
WHERE email IN (SELECT email
FROM member
WHERE login_id = [email protected])
I have faced this issue so many times and I was surprised that many of these don't work.
I simply deserialize the string with Newtonsoft.Json and I get cleartext.
string rough = "\"call 12\"";
rough = JsonConvert.DeserializeObject<string>(rough);
//the result is: "call 12";
Error message looks like this
Error message => ORA-00001: unique constraint (schema.unique_constraint_name) violated
ORA-00001 occurs when: "a query tries to insert a "duplicate" row in a table". It makes an unique constraint to fail, consequently query fails and row is NOT added to the table."
Solution:
Find all columns used in unique_constraint, for instance column a, column b, column c, column d collectively creates unique_constraint and then find the record from source data which is duplicate, using following queries:
-- to find <<owner of the table>> and <<name of the table>> for unique_constraint
select *
from DBA_CONSTRAINTS
where CONSTRAINT_NAME = '<unique_constraint_name>';
Then use Justin Cave's query (pasted below) to find all columns used in unique_constraint:
SELECT column_name, position
FROM all_cons_columns
WHERE constraint_name = <<name of constraint from the error message>>
AND owner = <<owner of the table>>
AND table_name = <<name of the table>>
-- to find duplicates
select column a, column b, column c, column d
from table
group by column a, column b, column c, column d
having count (<any one column used in constraint > ) > 1;
you can either delete that duplicate record from your source data (which was a select query in my particular case, as I experienced it with "Insert into select") or modify to make it unique or change the constraint.
class tile_tree_apple should be defined in a separate .h file.
tta.h:
#include "tile.h"
class tile_tree_apple : public tile
{
public:
tile onDestroy() {return *new tile_grass;};
tile tick() {if (rand()%20==0) return *new tile_tree;};
void onCreate() {health=rand()%5+4; type=TILET_TREE_APPLE;};
tile onUse() {return *new tile_tree;};
};
file tt.h
#include "tile.h"
class tile_tree : public tile
{
public:
tile onDestroy() {return *new tile_grass;};
tile tick() {if (rand()%20==0) return *new tile_tree_apple;};
void onCreate() {health=rand()%5+4; type=TILET_TREE;};
};
another thing: returning a tile and not a tile reference is not a good idea, unless a tile is a primitive or very "small" type.
In most cases the solution of CD.. will work perfectly fine. However I had a bit more twisted situation:
@(String.IsNullOrEmpty(Model.MaidenName) ? " " : Model.MaidenName)
This would print me " " in my page, respectively generate the source &nbsp;
. Now there is a function Html.Raw(" ")
which is supposed to let you write source code, except in this constellation it throws a compiler error:
Compiler Error Message: CS0173: Type of conditional expression cannot be determined because there is no implicit conversion between 'System.Web.IHtmlString' and 'string'
So I ended up writing a statement like the following, which is less nice but works even in my case:
@if (String.IsNullOrEmpty(Model.MaidenName)) { @Html.Raw(" ") } else { @Model.MaidenName }
Note: interesting thing is, once you are inside the curly brace, you have to restart a Razor block.
In Android 5, check your settings -> apps. Instead of deleting for just the active user (since android 5 can have multiple users and my phone had a guest user) tap on the accessory button in the top right corner of the action/toolbar and choose "uninstall for all users". It appears that in Android 5 when you just uninstall from launcher you only uninstall the app for the active user.
The app is still on the device.. This had me dazzled to since I was trying to install a release version, didn't work so I thought ow right must be because I still have the debug version installed, uninstalled the app. But than still couldn't install.. First clue was a record in the app list of the uninstalled app with the message next to it that it was uninstalled (image).
Here is the class LocationFinder
to find the GPS location. This class will call MyLocation
, which will do the business.
LocationFinder
public class LocationFinder extends Activity {
int increment = 4;
MyLocation myLocation = new MyLocation();
// private ProgressDialog dialog;
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.intermediat);
myLocation.getLocation(getApplicationContext(), locationResult);
boolean r = myLocation.getLocation(getApplicationContext(),
locationResult);
startActivity(new Intent(LocationFinder.this,
// Nearbyhotelfinder.class));
GPSMyListView.class));
finish();
}
public LocationResult locationResult = new LocationResult() {
@Override
public void gotLocation(Location location) {
// TODO Auto-generated method stub
double Longitude = location.getLongitude();
double Latitude = location.getLatitude();
Toast.makeText(getApplicationContext(), "Got Location",
Toast.LENGTH_LONG).show();
try {
SharedPreferences locationpref = getApplication()
.getSharedPreferences("location", MODE_WORLD_READABLE);
SharedPreferences.Editor prefsEditor = locationpref.edit();
prefsEditor.putString("Longitude", Longitude + "");
prefsEditor.putString("Latitude", Latitude + "");
prefsEditor.commit();
System.out.println("SHARE PREFERENCE ME PUT KAR DIYA.");
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
};
// handler for the background updating
}
MyLocation
public class MyLocation {
Timer timer1;
LocationManager lm;
LocationResult locationResult;
boolean gps_enabled=false;
boolean network_enabled=false;
public boolean getLocation(Context context, LocationResult result)
{
//I use LocationResult callback class to pass location value from MyLocation to user code.
locationResult=result;
if(lm==null)
lm = (LocationManager) context.getSystemService(Context.LOCATION_SERVICE);
//exceptions will be thrown if provider is not permitted.
try{gps_enabled=lm.isProviderEnabled(LocationManager.GPS_PROVIDER);}catch(Exception ex){}
try{network_enabled=lm.isProviderEnabled(LocationManager.NETWORK_PROVIDER);}catch(Exception ex){}
//Toast.makeText(context, gps_enabled+" "+network_enabled, Toast.LENGTH_LONG).show();
//don't start listeners if no provider is enabled
if(!gps_enabled && !network_enabled)
return false;
if(gps_enabled)
lm.requestLocationUpdates(LocationManager.GPS_PROVIDER, 0, 0, locationListenerGps);
if(network_enabled)
lm.requestLocationUpdates(LocationManager.NETWORK_PROVIDER, 0, 0, locationListenerNetwork);
timer1=new Timer();
timer1.schedule(new GetLastLocation(), 10000);
// Toast.makeText(context, " Yaha Tak AAya", Toast.LENGTH_LONG).show();
return true;
}
LocationListener locationListenerGps = new LocationListener() {
public void onLocationChanged(Location location) {
timer1.cancel();
locationResult.gotLocation(location);
lm.removeUpdates(this);
lm.removeUpdates(locationListenerNetwork);
}
public void onProviderDisabled(String provider) {}
public void onProviderEnabled(String provider) {}
public void onStatusChanged(String provider, int status, Bundle extras) {}
};
LocationListener locationListenerNetwork = new LocationListener() {
public void onLocationChanged(Location location) {
timer1.cancel();
locationResult.gotLocation(location);
lm.removeUpdates(this);
lm.removeUpdates(locationListenerGps);
}
public void onProviderDisabled(String provider) {}
public void onProviderEnabled(String provider) {}
public void onStatusChanged(String provider, int status, Bundle extras) {}
};
class GetLastLocation extends TimerTask {
@Override
public void run() {
//Context context = getClass().getgetApplicationContext();
Location net_loc=null, gps_loc=null;
if(gps_enabled)
gps_loc=lm.getLastKnownLocation(LocationManager.GPS_PROVIDER);
if(network_enabled)
net_loc=lm.getLastKnownLocation(LocationManager.NETWORK_PROVIDER);
//if there are both values use the latest one
if(gps_loc!=null && net_loc!=null){
if(gps_loc.getTime()>net_loc.getTime())
locationResult.gotLocation(gps_loc);
else
locationResult.gotLocation(net_loc);
return;
}
if(gps_loc!=null){
locationResult.gotLocation(gps_loc);
return;
}
if(net_loc!=null){
locationResult.gotLocation(net_loc);
return;
}
locationResult.gotLocation(null);
}
}
public static abstract class LocationResult{
public abstract void gotLocation(Location location);
}
}
ls F00001-0708-*|sed 's|^F0000\(.*\)|mv & F000\1|' | bash
So this question has been answered but to me the code used is not simple enough or complete. To me this bit here is what I was looking for and possibly some other people will like this as well.
string dateString = "198101";
if (DateTime.TryParse(dateString, out DateTime Temp) == true)
{
//do stuff
}
The output is stored in Temp
and not needed afterwards, datestring
is the input string to be tested.
An alternate way is to construct a view which is then queried just like a table. In many database managers using a view can result in better performance.
CREATE VIEW xyz SELECT q.question, a.alternative
FROM tbl_question AS q, tbl_alternative AS a
WHERE q.categoryid = a.categoryid
AND q._id = a.questionid;
This is from memory so there may be some syntactic issues. http://www.sqlite.org/lang_createview.html
I mention this approach because then you can use SQLiteQueryBuilder with the view as you implied that it was preferred.
You can use eval() for this purpose
>>> url = "'http address'"
>>> eval(url)
'http address'
while eval() poses risk , i think in this context it is safe.
If using Django, you can use the timezone.localtime
method:
from django.utils import timezone
date
# datetime.datetime(2014, 8, 1, 20, 15, 0, 513000, tzinfo=<UTC>)
timezone.localtime(date)
# datetime.datetime(2014, 8, 1, 16, 15, 0, 513000, tzinfo=<DstTzInfo 'America/New_York' EDT-1 day, 20:00:00 DST>)
You can activate JVM's debugging capability when starting up the java
command with a special option:
java -agentlib:jdwp=transport=dt_socket,address=8000,server=y,suspend=y -jar path/to/some/war/or/jar.jar
Starting up jar.jar
like that on the command line will:
server=y
) listening on port 8000 (address=8000
)Listening for transport dt_socket at address: 8000
to stdout
andsuspend=y
) until some debugger connects. The debugger acts as the client in this scenario.Common options for selecting a debugger are:
jar.jar
should begin executing.jdb -connect com.sun.jdi.SocketAttach:port=8000
Besides below answer, if you have this error in console ([$injector:nomod]
, MINERR_ASSET:22
), but everything seems to work fine, make sure that you don't have duplicate includes in your index.html.
Because this error can also be raised if you have duplicate includes of the files, that use this module, and are included before the file with actual module declaration.
Here's another good one: http://www.saltycrane.com/blog/2009/05/notes-using-pip-and-virtualenv-django/
This one shows how to use pip
and a pip requirements file with virtualenv; Scobal's two suggested tutorials are both very helpful but are both easy_install
-centric.
Note that none of these tutorials explain how to run a different version of Python within a virtualenv - for this, see this SO question: Use different Python version with virtualenv
ALTER TABLE `table` ADD INDEX `product_id_index` (`product_id`)
Never compare integer
to strings
in MySQL. If id
is int
, remove the quotes.
I am doing it like
public enum State
{
// Retrieving, // the MediaRetriever is retrieving music //
Stopped, // media player is stopped and not prepared to play
Preparing, // media player is preparing...
Playing, // playback active (media player ready!). (but the media player
// may actually be
// paused in this state if we don't have audio focus. But we
// stay in this state
// so that we know we have to resume playback once we get
// focus back)
Paused; // playback paused (media player ready!)
//public final static State[] vals = State.values();//copy the values(), calling values() clones the array
};
public State getState()
{
return mState;
}
And use in Switch Statement
switch (mService.getState())
{
case Stopped:
case Paused:
playPause.setBackgroundResource(R.drawable.selplay);
break;
case Preparing:
case Playing:
playPause.setBackgroundResource(R.drawable.selpause);
break;
}
Here is a demo react_hooks_debug_print.html
in react hooks that is based on Chris's answer. The json data example is from https://json.org/example.html.
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8" />
<title>Hello World</title>
<script src="https://unpkg.com/react@16/umd/react.development.js"></script>
<script src="https://unpkg.com/react-dom@16/umd/react-dom.development.js"></script>
<!-- Don't use this in production: -->
<script src="https://unpkg.com/[email protected]/babel.min.js"></script>
</head>
<body>
<div id="root"></div>
<script src="https://raw.githubusercontent.com/cassiozen/React-autobind/master/src/autoBind.js"></script>
<script type="text/babel">
let styles = {
root: { backgroundColor: '#1f4662', color: '#fff', fontSize: '12px', },
header: { backgroundColor: '#193549', padding: '5px 10px', fontFamily: 'monospace', color: '#ffc600', },
pre: { display: 'block', padding: '10px 30px', margin: '0', overflow: 'scroll', }
}
let data = {
"glossary": {
"title": "example glossary",
"GlossDiv": {
"title": "S",
"GlossList": {
"GlossEntry": {
"ID": "SGML",
"SortAs": "SGML",
"GlossTerm": "Standard Generalized Markup Language",
"Acronym": "SGML",
"Abbrev": "ISO 8879:1986",
"GlossDef": {
"para": "A meta-markup language, used to create markup languages such as DocBook.",
"GlossSeeAlso": [
"GML",
"XML"
]
},
"GlossSee": "markup"
}
}
}
}
}
const DebugPrint = () => {
const [show, setShow] = React.useState(false);
return (
<div key={1} style={styles.root}>
<div style={styles.header} onClick={ ()=>{setShow(!show)} }>
<strong>Debug</strong>
</div>
{ show
? (
<pre style={styles.pre}>
{JSON.stringify(data, null, 2) }
</pre>
)
: null
}
</div>
)
}
ReactDOM.render(
<DebugPrint data={data} />,
document.getElementById('root')
);
</script>
</body>
</html>
Or in the following way, add the style into header:
<style>
.root { background-color: #1f4662; color: #fff; fontSize: 12px; }
.header { background-color: #193549; padding: 5px 10px; fontFamily: monospace; color: #ffc600; }
.pre { display: block; padding: 10px 30px; margin: 0; overflow: scroll; }
</style>
And replace DebugPrint
with the follows:
const DebugPrint = () => {
// https://stackoverflow.com/questions/30765163/pretty-printing-json-with-react
const [show, setShow] = React.useState(false);
return (
<div key={1} className='root'>
<div className='header' onClick={ ()=>{setShow(!show)} }>
<strong>Debug</strong>
</div>
{ show
? (
<pre className='pre'>
{JSON.stringify(data, null, 2) }
</pre>
)
: null
}
</div>
)
}
Frank's example confused me a bit - it didn't work in my case because I didn't understand positioning well enough yet. It's important to note that the parent container element needs to have a non-static position (he mentioned this but I overlooked it, and it wasn't in his example).
Here's an example where the child - given padding and a border - uses absolute positioning to fill the parent 100%. The parent uses relative positioning in order to provide a point of reference for the child's position while remaining in the normal flow - the next element "more-content" is not affected:
#box {
position: relative;
height: 300px;
width: 600px;
}
#box p {
position: absolute;
border-style: dashed;
padding: 1em;
top: 0;
right: 0;
bottom: 0;
left: 0;
}
<div id="box">
<p>100% height and width!</p>
</div>
<div id="more-content">
</div>
A useful link for quickly learning CSS positioning
The expression ('AND' and 'OR' and 'NOT')
evaluates to 'NOT'
, so you are testing whether the list has NOT or not.
I met such problem. Visual Studio 2008 clearly said: problem was caused by libtiff.dll. It cannot be loaded for some reasom, caused by its manifest (as a matter of fact, this dll has no manifest at all). I fixed it, when I had removed libtiff.dll from my project (but simultaneously I lost ability to open compressed TIFFs!). I recompiled aforementioned dll, but problem still remains. Interesting, that at my own machine I have no such error. Three others comps refused to load my prog. Attention!!! Here http://www.error-repair-tools.com/ppc/error.php?t=0xc0150002 one wise boy wrote, that this error was caused by problem with registry and offers repair tool. I have a solid guess, that this "repair tool" will install some malicious soft at your comp.
I wanted a profile picture of size 96x96 with data from api. The following solution worked for me in project Angular 7.
.ts:
@Input() profile;
.html:
<span class="avatar" [ngStyle]="{'background-image': 'url('+ profile?.public_picture +')'}"></span>
.scss:
.avatar {
border-radius: 100%;
background-size: cover;
background-position: center center;
background-repeat: no-repeat;
width: 96px;
height: 96px;
}
Please note that if you write background
instead of 'background-image'
in [ngStyle]
, the styles you write (even in style
of element) for other background properties like background-position/size, etc. won't work. Because you will already fix it's properties with background: 'url(+ property +) (no providers for size, position, etc. !)'
. The [ngStyle]
priority is higher than style
of element. In background
here, only url() property will work. Be sure to use 'background-image'
instead of 'background'
in case you want to write more properties to background image.
I found a solution to my problem (thanks to the help of ImportanceOfBeingErnest).
All I had to do was to install tkinter
through the Linux bash terminal using the following command:
sudo apt-get install python3-tk
instead of installing it with pip
or directly in the virtual environment in Pycharm.
if candidate key determine non-prime attribute:
i.e cidsid--->location (---->=determining)
then, it is fully functional dependent
if proper subset of candidate key determining non-prime attribute:
i.e sid--->location (proper subset are sid and cid)
then it is term as partial dependency
to remove partial dependency we divide the table accordingly .
In practice, the difference is in the location where the preprocessor searches for the included file.
For #include <filename>
the preprocessor searches in an implementation dependent manner, normally in search directories pre-designated by the compiler/IDE. This method is normally used to include standard library header files.
For #include "filename"
the preprocessor searches first in the same directory as the file containing the directive, and then follows the search path used for the #include <filename>
form. This method is normally used to include programmer-defined header files.
A more complete description is available in the GCC documentation on search paths.
If you only need to find a free port for later use, here is a snippet similar to a previous answer, but shorter, using socketserver:
import socketserver
with socketserver.TCPServer(("localhost", 0), None) as s:
free_port = s.server_address[1]
Note that the port is not guaranteed to remain free, so you may need to put this snippet and the code using it in a loop.
The service reference is the newer interface for adding references to all manner of WCF services (they may not be web services) whereas Web reference is specifically concerned with ASMX web references.
You can access web references via the advanced options in add service reference (if I recall correctly).
I'd use service reference because as I understand it, it's the newer mechanism of the two.
Parameters take input before arguments. What you should do instead is add a parameter that accepts an array, and make it the first position parameter. ex:
param(
[Parameter(Position = 0)]
[string[]]$Hosts,
[string]$VLAN
)
foreach ($i in $Hosts)
{
Do-Stuff $i
}
Then call it like:
.\script.ps1 host1, host2, host3 -VLAN 2
Notice the comma between the values. This collects them in an array
All answers here are correct but i want to add something which is missing. when you are overriding a static method, it looks like we are overriding it but actually it is not method overriding. Instead it is called method hiding. Static methods cannot be overridden in Java.
Look at below example:
class Animal {
static void eat() {
System.out.println("animal is eating...");
}
}
class Dog extends Animal {
public static void main(String args[]) {
Animal a = new Dog();
a.eat(); // prints >> animal is eating...
}
static void eat() {
System.out.println("dog is eating...");
}
}
In dynamic binding, method is called depending on the type of reference and not the type of object that the reference variable is holding Here static bindinghappens because method hiding is not a dynamic polymorphism. If you remove static keyword in front of eat() and make it a non static method then it will show you dynamic polymorphism and not method-hiding.
i found the below link to support my answer: https://youtu.be/tNgZpn7AeP0
File myFile=new File("/tmp/myfile");
URL myUrl = myFile.toURI().toURL();
apache commons lang has a class SystemUtils.java you can use :
SystemUtils.IS_OS_LINUX
SystemUtils.IS_OS_WINDOWS
If each row of the matrix is the same size, then you can simply use a linear array and multiplication.
That is,
a=()
for (( i=0; i<4; ++i )); do
for (( j=0; j<5; ++j )); do
a[i*5+j]=0
done
done
Then your a[2][3] = 3
becomes
a[2*5+3] = 3
This approach might be worth turning into a set of functions, but since you can't pass arrays to or return arrays from functions, you would have to use pass-by-name and sometimes eval
. So I tend to file multidimensional arrays under "things bash is simply Not Meant To Do".
I created a module that works equal to the official Broadcastchannel but has fallbacks based on localstorage, indexeddb and unix-sockets. This makes sure it always works even with Webworkers or NodeJS. See pubkey:BroadcastChannel
To prevent IndexError: list index out of range
, use this syntax:
mylist = [1, 2, 3, 4]
# With None as default value:
value = mylist and mylist[-1]
# With specified default value (option 1):
value = mylist and mylist[-1] or 'default'
# With specified default value (option 2):
value = mylist[-1] if mylist else 'default'
SQL Server 2016 SP2 CU6 and SQL Server 2017 CU12 introduced trace flag 460 in order to return the details of truncation warnings. You can enable it at the query level or at the server level.
Query level
INSERT INTO dbo.TEST (ColumnTest)
VALUES (‘Test truncation warnings’)
OPTION (QUERYTRACEON 460);
GO
Server Level
DBCC TRACEON(460, -1);
GO
From SQL Server 2019 you can enable it at database level:
ALTER DATABASE SCOPED CONFIGURATION
SET VERBOSE_TRUNCATION_WARNINGS = ON;
The old output message is:
Msg 8152, Level 16, State 30, Line 13
String or binary data would be truncated.
The statement has been terminated.
The new output message is:
Msg 2628, Level 16, State 1, Line 30
String or binary data would be truncated in table 'DbTest.dbo.TEST', column 'ColumnTest'. Truncated value: ‘Test truncation warnings‘'.
In a future SQL Server 2019 release, message 2628 will replace message 8152 by default.
Almost every library I know defines a utility class called StringUtils
, StringUtil
or StringHelper
, and they usually include the method you are looking for.
My personal favorite is Apache Commons / Lang, where in the StringUtils class, you get both the
(The first checks whether a string is null or empty, the second checks whether it is null, empty or whitespace only)
There are similar utility classes in Spring, Wicket and lots of other libs. If you don't use external libraries, you might want to introduce a StringUtils class in your own project.
Update: many years have passed, and these days I'd recommend using Guava's Strings.isNullOrEmpty(string)
method.
All these suggestions work unless you put the anchors inside an UL list.
<ul>
<li>
<a>click me</a>>
</li>
</ul>
Then any cascade style sheet rules are overridden in the Chrome browser. The width becomes auto. Then you must use inline CSS rules directly on the anchor itself.
?????????????
I got some information from the developer's website
????
val cursor = context.contentResolver.query(fileUri, null, null, null, null)
??????????????
val nameIndex = cursor.getColumnIndex(OpenableColumns.DISPLAY_NAME)
val sizeIndex = cursor.getColumnIndex(OpenableColumns.SIZE)
cursor.moveToFirst()
val fileName = cursor.getString(nameIndex)
val size = cursor.getLong(sizeIndex)
???????
Don't forget to close resources
What you're trying to do is to monitor the property of attribute in directive. You can watch the property of attribute changes using $observe() as follows:
angular.module('myApp').directive('conversation', function() {
return {
restrict: 'E',
replace: true,
compile: function(tElement, attr) {
attr.$observe('typeId', function(data) {
console.log("Updated data ", data);
}, true);
}
};
});
Keep in mind that I used the 'compile' function in the directive here because you haven't mentioned if you have any models and whether this is performance sensitive.
If you have models, you need to change the 'compile' function to 'link' or use 'controller' and to monitor the property of a model changes, you should use $watch(), and take of the angular {{}} brackets from the property, example:
<conversation style="height:300px" type="convo" type-id="some_prop"></conversation>
And in the directive:
angular.module('myApp').directive('conversation', function() {
return {
scope: {
typeId: '=',
},
link: function(scope, elm, attr) {
scope.$watch('typeId', function(newValue, oldValue) {
if (newValue !== oldValue) {
// You actions here
console.log("I got the new value! ", newValue);
}
}, true);
}
};
});
InvariantCulture
is similar to en-US
, so i would use the correct CultureInfo
instead:
var dutchCulture = CultureInfo.CreateSpecificCulture("nl-NL");
var date1 = DateTime.ParseExact(date, "dd.MM.yyyy HH:mm:ss", dutchCulture);
And what about when the culture is en-us? Will I have to code for every single language there is out there?
If you want to know how to display the date in another culture like "en-us", you can use date1.ToString(CultureInfo.CreateSpecificCulture("en-US"))
.
One trick could be setting the color of tick labels as white to hide it!
plt.xticks(color='w')
plt.yticks(color='w')
or to be more generalized (@Armin Okic), you can set it as "None"
.
I really do not see any way to really get to the number of values in an enumeration in C++. Any of the before mention solution work as long as you do not define the value of your enumerations if you define you value that you might run into situations where you either create arrays too big or too small
enum example{ test1 = -2, test2 = -1, test3 = 0, test4 = 1, test5 = 2 }
in this about examples the result would create a array of 3 items when you need an array of 5 items
enum example2{ test1 , test2 , test3 , test4 , test5 = 301 }
in this about examples the result would create a array of 301 items when you need an array of 5 items
The best way to solve this problem in the general case would be to iterate through your enumerations but that is not in the standard yet as far as I know
alter user username superuser;
If you want to combine two files where one overlays the other (example: document A is a template and document B has the text you want to put on the template), this works:
after creating "doc", you want to write your template (templateFile) on top of that -
PDDocument watermarkDoc = PDDocument.load(getServletContext()
.getRealPath(templateFile));
Overlay overlay = new Overlay();
overlay.overlay(watermarkDoc, doc);
You can also use string.match().
var string1 = "aBc";
var match = string1.match(/AbC/i);
if(match) {
}
I got around this with len()
and a simple if/else
statement.
List elements will come back as an integer when wrapped in len()
(1 for present, 0 for absent)
l = []
print(len(l)) # Prints 0
if len(l) == 0:
print("Element is empty")
else:
print("Element is NOT empty")
Output:
Element is empty
Little Edit
Try adding
return new JavascriptResult() { Script = "alert('Successfully registered');" };
in place of
return RedirectToAction("Index");
When a module is loaded from a file in Python, __file__
is set to its path. You can then use that with other functions to find the directory that the file is located in.
Taking your examples one at a time:
A = os.path.join(os.path.dirname(__file__), '..')
# A is the parent directory of the directory where program resides.
B = os.path.dirname(os.path.realpath(__file__))
# B is the canonicalised (?) directory where the program resides.
C = os.path.abspath(os.path.dirname(__file__))
# C is the absolute path of the directory where the program resides.
You can see the various values returned from these here:
import os
print(__file__)
print(os.path.join(os.path.dirname(__file__), '..'))
print(os.path.dirname(os.path.realpath(__file__)))
print(os.path.abspath(os.path.dirname(__file__)))
and make sure you run it from different locations (such as ./text.py
, ~/python/text.py
and so forth) to see what difference that makes.
I just want to address some confusion first. __file__
is not a wildcard it is an attribute. Double underscore attributes and methods are considered to be "special" by convention and serve a special purpose.
http://docs.python.org/reference/datamodel.html shows many of the special methods and attributes, if not all of them.
In this case __file__
is an attribute of a module (a module object). In Python a .py
file is a module. So import amodule
will have an attribute of __file__
which means different things under difference circumstances.
Taken from the docs:
__file__
is the pathname of the file from which the module was loaded, if it was loaded from a file. The__file__
attribute is not present for C modules that are statically linked into the interpreter; for extension modules loaded dynamically from a shared library, it is the pathname of the shared library file.
In your case the module is accessing it's own __file__
attribute in the global namespace.
To see this in action try:
# file: test.py
print globals()
print __file__
And run:
python test.py
{'__builtins__': <module '__builtin__' (built-in)>, '__name__': '__main__', '__file__':
'test_print__file__.py', '__doc__': None, '__package__': None}
test_print__file__.py
You could do this by Regular Expression as follows you could use this code
EditText et = (EditText) findViewById(R.id.editText);
String NumberPattern = "[0-9]+";
String Number = et.getText().toString();
if (Number.matches(NumberPattern) && s.length() > 0)
{
//code for number
}
else
{
//code for incorrect number pattern
}
You use class media.FaceDetector in android to detect face for free.
This is an example of face detection: https://github.com/betri28/FaceDetectCamera
You can use Apache's commons for that:
String fullStackTrace = org.apache.commons.lang3.exception.ExceptionUtils.getStackTrace(e);
The difference between absolute and relative imports come into play only when you import a module from a package and that module imports an other submodule from that package. See the difference:
$ mkdir pkg
$ touch pkg/__init__.py
$ touch pkg/string.py
$ echo 'import string;print(string.ascii_uppercase)' > pkg/main1.py
$ python2
Python 2.7.9 (default, Dec 13 2014, 18:02:08) [GCC] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pkg.main1
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "pkg/main1.py", line 1, in <module>
import string;print(string.ascii_uppercase)
AttributeError: 'module' object has no attribute 'ascii_uppercase'
>>>
$ echo 'from __future__ import absolute_import;import string;print(string.ascii_uppercase)' > pkg/main2.py
$ python2
Python 2.7.9 (default, Dec 13 2014, 18:02:08) [GCC] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pkg.main2
ABCDEFGHIJKLMNOPQRSTUVWXYZ
>>>
In particular:
$ python2 pkg/main2.py
Traceback (most recent call last):
File "pkg/main2.py", line 1, in <module>
from __future__ import absolute_import;import string;print(string.ascii_uppercase)
AttributeError: 'module' object has no attribute 'ascii_uppercase'
$ python2
Python 2.7.9 (default, Dec 13 2014, 18:02:08) [GCC] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pkg.main2
ABCDEFGHIJKLMNOPQRSTUVWXYZ
>>>
$ python2 -m pkg.main2
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Note that python2 pkg/main2.py
has a different behaviour then launching python2
and then importing pkg.main2
(which is equivalent to using the -m
switch).
If you ever want to run a submodule of a package always use the -m
switch which prevents the interpreter for chaining the sys.path
list and correctly handles the semantics of the submodule.
Also, I much prefer using explicit relative imports for package submodules since they provide more semantics and better error messages in case of failure.
You should either use
if str1[0] == '"' and str1[-1] == '"'
or
if str1.startswith('"') and str1.endswith('"')
but not slice and check startswith/endswith together, otherwise you'll slice off what you're looking for...
brbcoding have been able to help me with the appropriate coding i needed, here is it
HTML
<input type="checkbox" id="checkme"/>
<input type="submit" name="sendNewSms" class="inputButton" disabled="disabled" id="sendNewSms" value=" Send " />
Javascript
var checker = document.getElementById('checkme');
var sendbtn = document.getElementById('sendNewSms');
// when unchecked or checked, run the function
checker.onchange = function(){
if(this.checked){
sendbtn.disabled = false;
} else {
sendbtn.disabled = true;
}
}
Almost every time I start a new project I Google this same question to see if I come up with any new answers.
It eventually boils down to - I take the latest version of MySQL and run tests.
I have tables where I want to do key/value lookups... and that's all. I need to get the value (0-512 bytes) for a hash key. There is not a lot of transactions on this DB. The table gets updates occasionally (in it's entirety), but 0 transactions.
So we're not talking about a complex system here, we are talking about a simple lookup,.. and how (other than making the table RAM resident) we can optimize performance.
I also do tests on other databases (ie NoSQL) to see if there is anywhere I can get an advantage. The biggest advantage I have found is in key mapping but as far as the lookup goes, MyISAM is currently topping them all.
Albeit, I wouldn't perform financial transactions with MyISAM tables but for simple lookups, you should test it out.. typically 2x to 5x the queries/sec.
Test it, I welcome debate.
Yes, there are several ways to do it. For instance, you can convert the list to a string and then remove the first and last characters:
l = ['a', 2, 'c']
print str(l)[1:-1]
'a', 2, 'c'
If your list contains only strings and you want remove the quotes too then you can use the join
method as has already been said.
You can use target
attribute to send form with redirect from iframe.
Your form open tag would be something like this:
method="post" action="http://some.url.com/form_action" target="_top"
How about keeping all .php-files except for index.php above the web root? No need for any rewrite rules or programmatic kludges.
Adding the includes-folder to your include path will then help to keep things simple, no need to use absolute paths etc.
Actually, you don't need to modify the object
prototype. The following should work to 'obtain' unique ids for any object, efficiently enough.
var __next_objid=1;
function objectId(obj) {
if (obj==null) return null;
if (obj.__obj_id==null) obj.__obj_id=__next_objid++;
return obj.__obj_id;
}
Use unlist
with use.names = FALSE
argument.
unlist(myList, use.names=FALSE)
If a task faults, the exception is re-thrown when the continuation code calls awaiter.GetResult(). Rather than calling GetResult, we could simply access the Result property of the task. The benefit of calling GetResult is that if the task faults, the exception is thrown directly without being wrapped in AggregateException, allowing for simpler and cleaner catch blocks.
For nongeneric tasks, GetResult() has a void return value. Its useful function is then solely to rethrow exceptions.
source : c# 7.0 in a Nutshell
If you put the username and password at clientside into the request this way:
URL url = new URL("http://localhost:8080/myapplication?wsdl");
MyWebService webservice = new MyWebServiceImplService(url).getMyWebServiceImplPort();
Map<String, Object> requestContext = ((BindingProvider) webservice).getRequestContext();
requestContext.put(BindingProvider.USERNAME_PROPERTY, "myusername");
requestContext.put(BindingProvider.PASSWORD_PROPERTY, "mypassword");
and call your webservice
String response = webservice.someMethodAtMyWebservice("test");
Then you can read the Basic Authentication string like this at the server side (you have to add some checks and do some exceptionhandling):
@Resource
WebServiceContext webserviceContext;
public void someMethodAtMyWebservice(String parameter) {
MessageContext messageContext = webserviceContext.getMessageContext();
Map<String, ?> httpRequestHeaders = (Map<String, ?>) messageContext.get(MessageContext.HTTP_REQUEST_HEADERS);
List<?> authorizationList = (List<?>) httpRequestHeaders.get("Authorization");
if (authorizationList != null && !authorizationList.isEmpty()) {
String basicString = (String) authorizationList.get(0);
String encodedBasicString = basicString.substring("Basic ".length());
String decoded = new String(Base64.getDecoder().decode(encodedBasicString), StandardCharsets.UTF_8);
String[] splitter = decoded.split(":");
String usernameFromBasicAuth = splitter[0];
String passwordFromBasicAuth = splitter[1];
}
Not just only when specify required
, I also got this issue when using min
and max
e.g.
<input type="number" min="1900" max="2090" />
That field can be hidden and shown based on other radio value. So, for temporary solution, I removed the validation.
You better use array_shift()
. That will return the first element of the array, remove it from the array and re-index the array. All in one efficient method.
jww is right — you're referencing the wrong intermediate certificate.
As you have been issued with a SHA256 certificate, you will need the SHA256 intermediate. You can grab it from here: http://secure2.alphassl.com/cacert/gsalphasha2g2r1.crt
Create an object holding following properties with an appropriate name.
and use this as a value in your map.
Also consider overriding the equals() and hashCode() method accordingly if you do not want object equality to be used for comparison (e.g. when inserting values into your map).
top5 = array[:5]
array[start:stop:step]
array[start:]
, array[:stop]
, array[::step]
import itertools
top5 = itertools.islice(my_list, 5) # grab the first five elements
You can't slice a generator directly in Python. itertools.islice()
will wrap an object in a new slicing generator using the syntax itertools.islice(generator, start, stop, step)
Remember, slicing a generator will exhaust it partially. If you want to keep the entire generator intact, perhaps turn it into a tuple or list first, like: result = tuple(generator)
inside the Form, You can use this code. Replace your variable name (i use $variable)
<input type="text" value="<?php echo (isset($variable))?$variable:'';?>">
To Write :
SharedPreferences preferences = getSharedPreferences("AUTHENTICATION_FILE_NAME", Context.MODE_PRIVATE);
SharedPreferences.Editor editor = preferences.edit();
editor.putString("Authentication_Id",userid.getText().toString());
editor.putString("Authentication_Password",password.getText().toString());
editor.putString("Authentication_Status","true");
editor.apply();
To Read :
SharedPreferences prfs = getSharedPreferences("AUTHENTICATION_FILE_NAME", Context.MODE_PRIVATE);
String Astatus = prfs.getString("Authentication_Status", "");
CreateOrReplaceTempView will create a temporary view of the table on memory it is not presistant at this moment but you can run sql query on top of that . if you want to save it you can either persist or use saveAsTable to save.
first we read data in csv format and then convert to data frame and create a temp view
Reading data in csv format
val data = spark.read.format("csv").option("header","true").option("inferSchema","true").load("FileStore/tables/pzufk5ib1500654887654/campaign.csv")
printing the schema
data.printSchema
data.createOrReplaceTempView("Data")
Now we can run sql queries on top the table view we just created
%sql select Week as Date,Campaign Type,Engagements,Country from Data order by Date asc
The problem might be your split()
call. Try just split(" ")
without the square brackets.
$(document.body).on('hidden.bs.modal', function () {
$('#myModal').removeData('bs.modal')
});
I took the liberty of modifying ConorLuddy's answer to address both 24 hour time and 12 hour time.
function minutesToHHMM (mins, twentyFour = false) {
let h = Math.floor(mins / 60);
let m = mins % 60;
m = m < 10 ? '0' + m : m;
if (twentyFour) {
h = h < 10 ? '0' + h : h;
return `${h}:${m}`;
} else {
let a = 'am';
if (h >= 12) a = 'pm';
if (h > 12) h = h - 12;
return `${h}:${m} ${a}`;
}
}
System.IO.File.Copy(oldPathAndName, newPathAndName);
In addition to the above you can use the System.exit()
to return an exit code which may be very usuefull specially if your calling the process automatically using the System.exit(code);
this can help you determine for example if an error has occured during the run.
This is not so helpful if you need to just know the month name for a given number (1 - 12), as the current day doesn't matter.
calendar.month_name[i]
or
calendar.month_abbr[i]
are more useful here.
Here is an example:
import calendar
for month_idx in range(1, 13):
print (calendar.month_name[month_idx])
print (calendar.month_abbr[month_idx])
print ("")
Sample output:
January
Jan
February
Feb
March
Mar
...
Solved my own problem. This line:
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream()));
needs to be:
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream(), "UTF-8"));
or since Java 7:
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream(), StandardCharsets.UTF_8));
All above solutions are correct. But, when we are talking about a normal PHP application, they have to included in every page, that it requires. A way to solve this, is through .htaccess
at root folder.
Just to hide the errors. [Put one of the followling lines in the file]
php_flag display_errors off
Or
php_value display_errors 0
Next, to set the error reporting
php_value error_reporting 30719
If you are wondering how the value 30719
came, E_ALL (32767), E_STRICT (2048) are actually constant that hold numeric value and (32767 - 2048 = 30719
)
Sample for right-click menu option as well:
[HKEY_CLASSES_ROOT\*\shell\SHA1 PS check\command]
@="C:\\Windows\\system32\\WindowsPowerShell\\v1.0\\powershell.exe -NoExit -Command Get-FileHash -Algorithm SHA1 '%1'"
Try line-height
like I've done here:
http://jsfiddle.net/BqTUS/5/
Your DOS command 2> nul
Read page Using command redirection operators. Besides the "2>" construct mentioned by Tanuki Software, it lists some other useful combinations.
The following works for me with nodejs:
xServer.use(function(req, res, next) {
res.setHeader("Access-Control-Allow-Origin", 'http://localhost:8080');
res.setHeader('Access-Control-Allow-Methods', 'POST,GET,OPTIONS,PUT,DELETE');
res.setHeader('Access-Control-Allow-Headers', 'Content-Type,Accept');
next();
});
A good book on Subversion is Pragmatic Version Control using Subversion where your question is explained, and it gives a lot more information.
$timeFirst = strtotime('2011-05-12 18:20:20');
$timeSecond = strtotime('2011-05-13 18:20:20');
$differenceInSeconds = $timeSecond - $timeFirst;
You will then be able to use the seconds to find minutes, hours, days, etc.
it can be done with CURL or AJAX. The response is equally cryptic as the answer.
Here you go: ES5
var test = 'Hello World';
if( test.indexOf('World') >= 0){
// Found world
}
With ES6 best way would be to use includes
function to test if the string contains the looking work.
const test = 'Hello World';
if (test.includes('World')) {
// Found world
}
You could use the window’s name window.name
to store the information. This is known as JavaScript session. But it only works as long as the same window/tab is used.
Sure you can with reflection. Here is the code to grab the properties off of a given type.
var info = typeof(SomeType).GetProperties();
If you can give more info on what you're comparing about the properties we can get together a basic diffing algorithmn. This code for intstance will diff on names
public bool AreDifferent(Type t1, Type t2) {
var list1 = t1.GetProperties().OrderBy(x => x.Name).Select(x => x.Name);
var list2 = t2.GetProperties().OrderBy(x => x.Name).Select(x => x.Name);
return list1.SequenceEqual(list2);
}
If you're looking for the path of a specific app, a quick and dirty solution is to just grep the bugreport:
$ adb bugreport | grep 'dir=/data/app'
I don't know that this will provide an exhaustive list, so it may help to run the app first.
Based on my highly scientific and accurate experiment, it tops out on my machine well before 1,000,000,000 characters. (I'm still running the code below to get a better pinpoint).
UPDATE:
After a few hours, I've given up. Final results: Can go a lot bigger than 100,000,000 characters, instantly given System.OutOfMemoryException
at 1,000,000,000 characters.
using System;
using System.Collections.Generic;
public class MyClass
{
public static void Main()
{
int i = 100000000;
try
{
for (i = i; i <= int.MaxValue; i += 5000)
{
string value = new string('x', i);
//WL(i);
}
}
catch (Exception exc)
{
WL(i);
WL(exc);
}
WL(i);
RL();
}
#region Helper methods
private static void WL(object text, params object[] args)
{
Console.WriteLine(text.ToString(), args);
}
private static void RL()
{
Console.ReadLine();
}
private static void Break()
{
System.Diagnostics.Debugger.Break();
}
#endregion
}
this is old but for help :
you can also use the stringReader stream
string str = "asasdkopaksdpoadks";
StringReader TheStream = new StringReader( str );
Using reshape2
and dplyr
. Your data:
df <- read.table(text=
"tea coke beer water gender
14.55 26.50793651 22.53968254 40 1
24.92997199 24.50980392 26.05042017 24.50980393 2
23.03732304 30.63063063 25.41827542 20.91377091 1
225.51781276 24.6064623 24.85501243 50.80645161 1
24.53662842 26.03706973 25.24271845 24.18358341 2", header=TRUE)
Getting data into correct form:
library(reshape2)
library(dplyr)
df.melt <- melt(df, id="gender")
bar <- group_by(df.melt, variable, gender)%.%summarise(mean=mean(value))
Plotting:
library(ggplot2)
ggplot(bar, aes(x=variable, y=mean, fill=factor(gender)))+
geom_bar(position="dodge", stat="identity")
Scott Mitchell provides in a blog post solutions for removing unnecessary headers.
As already said here in other answers, for the Server
header, there is the http module solution, or a web.config solution for IIS 10+, or you can use URLRewrite instead for blanking it.
The most practical solution for an up-to-date (IIS 10 +) setup is using removeServerHeader
in the web.config:
<system.webServer>
...
<security>
<requestFiltering removeServerHeader="true" />
</security>
...
</system.webServer>
For X-AspNet-Version
and X-AspNetMvc-Version
, he provides a better way than removing them on each response: simply not generating them at all.
Use enableVersionHeader
for disabling X-AspNet-Version
, in web.config
<system.web>
...
<httpRuntime enableVersionHeader="false" />
...
</system.web>
Use MvcHandler.DisableMvcResponseHeader
in .Net Application_Start event for disabling X-AspNetMvc-Version
MvcHandler.DisableMvcResponseHeader = true;
And finally, remove in IIS configuration the X-Powered-By
custom header in web.config.
<system.webServer>
...
<httpProtocol>
<customHeaders>
<remove name="X-Powered-By" />
</customHeaders>
</httpProtocol>
...
</system.webServer>
Beware, if you have ARR (Application Request Routing), it will also add its own X-Powered-By
, which will not be removed by custom headers settings. This one has to be removed through the IIS Manager, Editor configuration on the IIS root (not on a site): go to system.webServer/proxy
node and set arrResponseHeader
to false
. After an IISReset
, it is taken into account.
(I have found this one here, excepted this post is about old IIS 6.0 way of configuring things.)
Do not forget that solution by application code does not apply by default to header generated on static content (you may activate the runAllManagedModulesForAllRequests
for changing that, but it causes all requests to run .Net pipeline). It is not an issue for X-AspNetMvc-Version
since it is not added on static content (at least if static request are not run in .Net pipeline).
Side note: when the aim is to cloak used technology, you should also change standard .Net cookie names (.ASPXAUTH
if forms auth activated (use name
attribute on forms
tag in web.config), ASP.NET_SessionId
(use <sessionState cookieName="yourName" />
in web.config under system.web
tag), __RequestVerificationToken
(change it by code with AntiForgeryConfig.CookieName
, but unfortunately does not apply to the hidden input this system generates in the html)).
What it is telling you is - the 2nd guard let
or the if let check
is not happening on an Optional Int or Optional String. You already have a non-optional value, so guarding or if-letting is not needed anymore
.row>.col, .row>[class^=col-] {_x000D_
padding-top: .75rem;_x000D_
padding-bottom: .75rem;_x000D_
background-color: rgba(86,61,124,.15);_x000D_
border: 1px solid rgba(86,61,124,.2);_x000D_
}
_x000D_
<link href="https://maxcdn.bootstrapcdn.com/bootstrap/4.0.0/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
<div class="container">_x000D_
<div class="row justify-content-md-center">_x000D_
<div class="col col-lg-2">_x000D_
1 of 3_x000D_
</div>_x000D_
<div class="col col-lg-2">_x000D_
1 of 2_x000D_
</div>_x000D_
<div class="col col-lg-2">_x000D_
3 of 3_x000D_
</div>_x000D_
</div>_x000D_
</div>
_x000D_
I'm going to put this in here more for completeness than direct relevance to the OP. I spent nearly a day debugging an HttpClient
request, wondering why I was never getting back a response.
Finally found that I had forgotten to await
the async
call further down the call stack.
Feels about as good as missing a semicolon.
Here's another solution. This uses:
For the following input string:
"This is\, a value",Hello,4,-123,3.1415,'This is also\, possible',true
The code outputs:
[
"This is, a value",
"Hello",
4,
-123,
3.1415,
"This is also, possible",
true
]
Here's my implementation of parseCSVLine() in a runnable code snippet:
function parseCSVLine(text) {
return text.match( /\s*(\".*?\"|'.*?'|[^,]+)\s*(,|$)/g ).map( function (text) {
let m;
if (m = text.match(/^\s*\"(.*?)\"\s*,?$/)) return m[1]; // Double Quoted Text
if (m = text.match(/^\s*'(.*?)'\s*,?$/)) return m[1]; // Single Quoted Text
if (m = text.match(/^\s*(true|false)\s*,?$/)) return m[1] === "true"; // Boolean
if (m = text.match(/^\s*((?:\+|\-)?\d+)\s*,?$/)) return parseInt(m[1]); // Integer Number
if (m = text.match(/^\s*((?:\+|\-)?\d*\.\d*)\s*,?$/)) return parseFloat(m[1]); // Floating Number
if (m = text.match(/^\s*(.*?)\s*,?$/)) return m[1]; // Unquoted Text
return text;
} );
}
let data = `"This is\, a value",Hello,4,-123,3.1415,'This is also\, possible',true`;
let obj = parseCSVLine(data);
console.log( JSON.stringify( obj, undefined, 2 ) );
_x000D_
A good hash function has the following properties:
Given a hash of a message it is computationally infeasible for an attacker to find another message such that their hashes are identical.
Given a pair of message, m' and m, it is computationally infeasible to find two such that that h(m) = h(m')
The two cases are not the same. In the first case, there is a pre-existing hash that you're trying to find a collision for. In the second case, you're trying to find any two messages that collide. The second task is significantly easier due to the birthday "paradox."
Where performance is not that great an issue, you should always use a secure hash function. There are very clever attacks that can be performed by forcing collisions in a hash. If you use something strong from the outset, you'll secure yourself against these.
Don't use MD5 or SHA-1 in new designs. Most cryptographers, me included, would consider them broken. The principle source of weakness in both of these designs is that the second property, which I outlined above, does not hold for these constructions. If an attacker can generate two messages, m and m', that both hash to the same value they can use these messages against you. SHA-1 and MD5 also suffer from message extension attacks, which can fatally weaken your application if you're not careful.
A more modern hash such as Whirpool is a better choice. It does not suffer from these message extension attacks and uses the same mathematics as AES uses to prove security against a variety of attacks.
Hope that helps!
I created a folder named a in /home/prasanth and copied your code to a file named A.java. I compiled from /home/prasanth as javac a/A.java
and run javac a.A
. I got output as
a!
db.collection.findOne().sort({age:-1}) //get Max without need for limit(1)
Another option to all of the good answers here is the npm package react-google-font-loader
, found here.
The usage is simple:
import GoogleFontLoader from 'react-google-font-loader';
// Somewhere in your React tree:
<GoogleFontLoader
fonts={[
{
font: 'Bungee Inline',
weights: [400],
},
]}
/>
Then you can just use the family name in your CSS:
body {
font-family: 'Bungee Inline', cursive;
}
Disclaimer: I'm the author of the react-google-font-loader
package.
Using windows authentication:
String url ="jdbc:sqlserver://PC01\inst01;databaseName=DB01;integratedSecurity=true";
Using SQL authentication:
String url ="jdbc:sqlserver://PC01\inst01;databaseName=DB01";
You can use this solution for removing a char:
#include <algorithm>
#include <string>
using namespace std;
str.erase(remove(str.begin(), str.end(), char_to_remove), str.end());
For windows set the default browser to open html files to Chrome. Configuration > Default Apps > Default Apps by File Type. Worked for me.
You would want to use CSS to achieve that.
say you have a table with the attribute id="my_table"
You would want to write the following in your css file
#my_table{
margin-top:10px //moves your table 10pixels down
margin-left:10px //moves your table 10pixels right
}
if you do not have a CSS file then you may just add margin-top:10px, margin-left:10px
to the style attribute in your table element like so
<table style="margin-top:10px; margin-left:10px;">
....
</table>
There are a lot of resources on the net describing CSS and HTML in detail
One way is to upload it to your own Maven repository manager (such as Nexus). It's good practice to have an own repository manager anyway.
Another nice way I've recently seen is to include the Maven Install Plugin in your build lifecycle: You declare in the POM to install the files to the local repository. It's a little but small overhead and no manual step involved.
http://maven.apache.org/plugins/maven-install-plugin/install-file-mojo.html
Alternatively you can create a new scope and pass through params via the scope option
var scope = $rootScope.$new();
scope.params = {editId: $scope.editId};
$modal.open({
scope: scope,
templateUrl: 'template.html',
controller: 'Controller',
});
In your modal controller pass in $scope, you then do not need to pass in and itemsProvider or what ever resolve you named it
modalController = function($scope) {
console.log($scope.params)
}