Programs & Examples On #Artifact

You might have problem on Windows while adding jar to maven because of syntax.

Try encapsulating -D parameters with double quotas like this;

mvn install:install-file "-Dfile=ojdbc6.jar" "-DgroupId=com.oracle" "-DartifactId=ojdbc6" "-Dversion=11.2.0" "-Dpackaging=jar" 

Be aware of you should use same version/atifactId/groupId inside your pom.xml. You can't use version 11.2.0.3 after command above. You have to put his in you pom.xml;

    <dependency>
        <groupId>com.oracle</groupId>
        <artifactId>ojdbc6</artifactId>
        <version>11.2.0</version>
    </dependency>

If you want to use another version, like 12.1.0.1, you should run above command with that version or other info

Because both a and b have only one axis, as their shape is (3), and the axis parameter specifically refers to the axis of the elements to concatenate.

this example should clarify what concatenate is doing with axis. Take two vectors with two axis, with shape (2,3):

a = np.array([[1,5,9], [2,6,10]])
b = np.array([[3,7,11], [4,8,12]])

concatenates along the 1st axis (rows of the 1st, then rows of the 2nd):

np.concatenate((a,b), axis=0)
array([[ 1,  5,  9],
       [ 2,  6, 10],
       [ 3,  7, 11],
       [ 4,  8, 12]])

concatenates along the 2nd axis (columns of the 1st, then columns of the 2nd):

np.concatenate((a, b), axis=1)
array([[ 1,  5,  9,  3,  7, 11],
       [ 2,  6, 10,  4,  8, 12]])

to obtain the output you presented, you can use vstack

a = np.array([1,2,3])
b = np.array([4,5,6])
np.vstack((a, b))
array([[1, 2, 3],
       [4, 5, 6]])

You can still do it with concatenate, but you need to reshape them first:

np.concatenate((a.reshape(1,3), b.reshape(1,3)))
array([[1, 2, 3],
       [4, 5, 6]])

Finally, as proposed in the comments, one way to reshape them is to use newaxis:

np.concatenate((a[np.newaxis,:], b[np.newaxis,:]))

If you can have your quote delimiter be double quotes, then this is a duplicate of Example JavaScript code to parse CSV data.

You can either translate all single-quotes to double-quotes first:

string = string.replace( /'/g, '"' );

...or you can edit the regex in that question to recognize single-quotes instead of double-quotes:

// Quoted fields.
"(?:'([^']*(?:''[^']*)*)'|" +

However, this assumes certain markup that is not clear from your question. Please clarify what all the various possibilities of markup can be, per my comment on your question.

<?
ob_start(); // ensures anything dumped out will be caught

// do stuff here
$url = 'http://example.com/thankyou.php'; // this can be set based on whatever

// clear out the output buffer
while (ob_get_status()) 
{
    ob_end_clean();
}

// no redirect
header( "Location: $url" );
?>

here's my 2 cents worth:

• resuable function forpromise()
• emulates a classic for loop
• allows for early exit based on internal logic, returning a value
• can collect an array of results passed into resolve/next/collect
• defaults to start=0,increment=1
• exceptions thrown inside loop are caught and passed to .catch()

    function forpromise(lo, hi, st, res, fn) {_x000D_
        if (typeof res === 'function') {_x000D_
            fn = res;_x000D_
            res = undefined;_x000D_
        }_x000D_
        if (typeof hi === 'function') {_x000D_
            fn = hi;_x000D_
            hi = lo;_x000D_
            lo = 0;_x000D_
            st = 1;_x000D_
        }_x000D_
        if (typeof st === 'function') {_x000D_
            fn = st;_x000D_
            st = 1;_x000D_
        }_x000D_
        return new Promise(function(resolve, reject) {_x000D_
_x000D_
            (function loop(i) {_x000D_
                if (i >= hi) return resolve(res);_x000D_
                const promise = new Promise(function(nxt, brk) {_x000D_
                    try {_x000D_
                        fn(i, nxt, brk);_x000D_
                    } catch (ouch) {_x000D_
                        return reject(ouch);_x000D_
                    }_x000D_
                });_x000D_
                promise._x000D_
                catch (function(brkres) {_x000D_
                    hi = lo - st;_x000D_
                    resolve(brkres)_x000D_
                }).then(function(el) {_x000D_
                    if (res) res.push(el);_x000D_
                    loop(i + st)_x000D_
                });_x000D_
            })(lo);_x000D_
_x000D_
        });_x000D_
    }_x000D_
_x000D_
_x000D_
    //no result returned, just loop from 0 thru 9_x000D_
    forpromise(0, 10, function(i, next) {_x000D_
        console.log("iterating:", i);_x000D_
        next();_x000D_
    }).then(function() {_x000D_
_x000D_
_x000D_
        console.log("test result 1", arguments);_x000D_
_x000D_
        //shortform:no result returned, just loop from 0 thru 4_x000D_
        forpromise(5, function(i, next) {_x000D_
            console.log("counting:", i);_x000D_
            next();_x000D_
        }).then(function() {_x000D_
_x000D_
            console.log("test result 2", arguments);_x000D_
_x000D_
_x000D_
_x000D_
            //collect result array, even numbers only_x000D_
            forpromise(0, 10, 2, [], function(i, collect) {_x000D_
                console.log("adding item:", i);_x000D_
                collect("result-" + i);_x000D_
            }).then(function() {_x000D_
_x000D_
                console.log("test result 3", arguments);_x000D_
_x000D_
                //collect results, even numbers, break loop early with different result_x000D_
                forpromise(0, 10, 2, [], function(i, collect, break_) {_x000D_
                    console.log("adding item:", i);_x000D_
                    if (i === 8) return break_("ending early");_x000D_
                    collect("result-" + i);_x000D_
                }).then(function() {_x000D_
_x000D_
                    console.log("test result 4", arguments);_x000D_
_x000D_
                    // collect results, but break loop on exception thrown, which we catch_x000D_
                    forpromise(0, 10, 2, [], function(i, collect, break_) {_x000D_
                        console.log("adding item:", i);_x000D_
                        if (i === 4) throw new Error("failure inside loop");_x000D_
                        collect("result-" + i);_x000D_
                    }).then(function() {_x000D_
_x000D_
                        console.log("test result 5", arguments);_x000D_
_x000D_
                    })._x000D_
                    catch (function(err) {_x000D_
_x000D_
                        console.log("caught in test 5:[Error ", err.message, "]");_x000D_
_x000D_
                    });_x000D_
_x000D_
                });_x000D_
_x000D_
            });_x000D_
_x000D_
_x000D_
        });_x000D_
_x000D_
_x000D_
_x000D_
    });

I've used a trick so that the border is displayed outside the container. With this trick only a line is drawn so the background will be shown of the underlying view.

<?xml version="1.0" encoding="utf-8"?>
<layer-list xmlns:android="http://schemas.android.com/apk/res/android" >
    <item
        android:bottom="1dp"
        android:left="-2dp"
        android:right="-2dp"
        android:top="-2dp">
        <shape android:shape="rectangle" >
            <stroke
                android:width="1dp"
                android:color="#FF000000" />

            <solid android:color="#00FFFFFF" />

            <padding android:left="10dp"
                android:right="10dp"
                android:top="10dp"
                android:bottom="10dp" />
        </shape>
    </item>

</layer-list>

Alternatively, you can also try:

gsub("\\S+_", "", a)

We can hide close button on form by setting this.ControlBox=false;

Note that this hides all of those sizing buttons. Not just the X. In some cases that may be fine.

Try download the zip files from http://www.nltk.org/nltk_data/ and then unzip, save in your Python folder, such as C:\ProgramData\Anaconda3\nltk_data

remember, SSL/TLS operates at the Transport Layer, so all the crypto goo happens under the application-layer HTTP stuff.

http://en.wikipedia.org/wiki/File:IP_stack_connections.svg

that's the long way of saying, "Yes!"

Python uses duck typing, so it doesn't need special syntax to handle multiple types.

If you're from a C++ background, you'll remember that, as long as the operations used in the template function/class are defined on some type T (at the syntax level), you can use that type T in the template.

So, basically, it works the same way:

1. define a contract for the type of items you want to insert in the binary tree.
2. document this contract (i.e. in the class documentation)
3. implement the binary tree using only operations specified in the contract
4. enjoy

You'll note however, that unless you write explicit type checking (which is usually discouraged), you won't be able to enforce that a binary tree contains only elements of the chosen type.

A better solution without if-else:

$(document).ready(function() {
    $("#chkdwn2").click(function() {
        $("#dropdown").prop("disabled", this.checked);  
    });
});

Here is a simple couple lines that looks for extention as well as provides a sort option

def get_sorted_files(src_dir, regex_ext='*', sort_reverse=False): 
    files_to_evaluate = [os.path.join(src_dir, f) for f in os.listdir(src_dir) if re.search(r'.*\.({})$'.format(regex_ext), f)]
    files_to_evaluate.sort(key=os.path.getmtime, reverse=sort_reverse)
    return files_to_evaluate

There's nothing in the BCL to do this for you, but there are two great libraries for .NET which do support the functionality.

• SharpZipLib
• DotNetZip

I've used both and can say that the two are very complete and have well-designed APIs, so it's mainly a matter of personal preference.

I'm not sure whether they explicitly support adding Folders rather than just individual files to zip files, but it should be quite easy to create something that recursively iterated over a directory and its sub-directories using the DirectoryInfo and FileInfo classes.

The path you give to LOAD DATA INFILE is for the filesystem on the machine where the server is running, not the machine you connect from. LOAD DATA LOCAL INFILE is for the client's machine, but it requires that the server was started with the right settings, otherwise it's not allowed. You can read all about it here: http://dev.mysql.com/doc/refman/5.0/en/load-data-local.html

As for SELECT INTO OUTFILE I'm not sure why there is not a local version, besides it probably being tricky to do over the connection. You can get the same functionality through the mysqldump tool, but not through sending SQL to the server.

I have lost hours today to find the reason, fortunately this issue is not because of MapFragment implementation, fnfortunately, this does not work because nested fragments are only supported through support library from rev 11.

My implementation has an activity with actionbar (in tabbed mode) with two tabs (no viewpager), one having the map and the other having a list of entries. Of course I've been quite naive to use MapFragment inside my tab-fragments, et voila the app crashed everytime I switched back to map-tab.

( The same issue I also would have in case my tab-fragment would inflate any layout containing any other fragment ).

One option is to use the MapView (instead of MapFragment), with some overhead though ( see MapView Docs as drop-in replacement in the layout.xml, another option is to use support-library up from rev. 11 but then take programmatic approach since nested fragments are neither supported via layout. Or just working around programmatically by explicitely destroying the fragment (like in the answer from Matt / Vidar), btw: same effect is achieved using the MapView (option 1).

But actually, I did not want to loose the map everytime I tab away, that is, I wanted to keep it in memory and cleanup only upon activity close, so I decided to simply hide/show the map while tabbing, see FragmentTransaction / hide

This is an example of using REG_EXTENDED. This regular expression

"^(-)?([0-9]+)((,|.)([0-9]+))?\n$"

Allows you to catch decimal numbers in Spanish system and international. :)

#include <regex.h>
#include <stdlib.h>
#include <stdio.h>
regex_t regex;
int reti;
char msgbuf[100];

int main(int argc, char const *argv[])
{
    while(1){
        fgets( msgbuf, 100, stdin );
        reti = regcomp(&regex, "^(-)?([0-9]+)((,|.)([0-9]+))?\n$", REG_EXTENDED);
        if (reti) {
            fprintf(stderr, "Could not compile regex\n");
            exit(1);
        }

        /* Execute regular expression */
        printf("%s\n", msgbuf);
        reti = regexec(&regex, msgbuf, 0, NULL, 0);
        if (!reti) {
            puts("Match");
        }
        else if (reti == REG_NOMATCH) {
            puts("No match");
        }
        else {
            regerror(reti, &regex, msgbuf, sizeof(msgbuf));
            fprintf(stderr, "Regex match failed: %s\n", msgbuf);
            exit(1);
        }

        /* Free memory allocated to the pattern buffer by regcomp() */
        regfree(&regex);
    }

}

Inline tag is used to add another src of document to the current html element.

In your case an video of a youtube and we need to specify the html type(4 or 5) to the browser externally to the link

so add ?html=5 to the end of the link.. :)

If are using jQuery, grep may be useful:

var arr = [ a, b, c, , e, f, , g, h ];

arr = jQuery.grep(arr, function(n){ return (n); });

arr is now [ a, b, c, d, e, f, g];

Use TO_TIMESTAMP function

TO_TIMESTAMP(date_string,'YYYY-MM-DD HH24:MI:SS')

Replace

#include "Landing.h"

with

class Landing;

If you still get errors, also post Item.h, Flight.h and common.h

EDIT: In response to comment.

You will need to e.g. #include "Landing.h" from Event.cpp in order to actually use the class. You just cannot include it from Event.h

To get the version numbers try

 System.Reflection.Assembly assembly = System.Reflection.Assembly.GetExecutingAssembly();
 System.Reflection.AssemblyName assemblyName = assembly.GetName();
 Version version = assemblyName.Version;

To set the version number, create/edit AssemblyInfo.cs

 [assembly: AssemblyVersion("1.0.*")]
 [assembly: AssemblyFileVersion("1.0.*")]

Also as a side note, the third number is the number of days since 2/1/2000 and the fourth number is half of the amount of total seconds in the day. So if you compile at midnight it should be zero.

1. Generate an access token with never expire date, and select all the options available.
2. Remove the existing SSH keys.
3. Clone the repo with the https instead of ssh.
4. Use the username but use the generated access token instead of password.

alternatively you can set remote to http by using this command in the existing repo, and use this command git remote set-url origin https://gitlab.com/[username]/[repo-name].git

First of all, stop using impossible-to-understand class names like A, B, C. Use Animal, Mammal, Giraffe, or Food, Fruit, Orange or something where the relationships are clear.

Your question then is "why can I not assign a list of giraffes to a variable of type list of animal, since I can assign a giraffe to a variable of type animal?"

The answer is: suppose you could. What could then go wrong?

Well, you can add a Tiger to a list of animals. Suppose we allow you to put a list of giraffes in a variable that holds a list of animals. Then you try to add a tiger to that list. What happens? Do you want the list of giraffes to contain a tiger? Do you want a crash? or do you want the compiler to protect you from the crash by making the assignment illegal in the first place?

We choose the latter.

This kind of conversion is called a "covariant" conversion. In C# 4 we will allow you to make covariant conversions on interfaces and delegates when the conversion is known to be always safe. See my blog articles on covariance and contravariance for details. (There will be a fresh one on this topic on both Monday and Thursday of this week.)

A few things you could use:

• dir() will give you the list of in scope variables:
• globals() will give you a dictionary of global variables
• locals() will give you a dictionary of local variables

We are already in 21st century!! Don't try to implement the already existing data structures. Try to use the existing data structures.

Use STL or Boost library

Run these commands for Beyond Compare 3(if the BCompare.exe path is different in your system, please replace it according to yours):

git config --global diff.tool bc3
git config --global difftool.bc3.cmd "\"c:/program files (x86)/beyond compare 3/BCompare.exe\" \"$LOCAL\" \"$REMOTE\""
git config --global difftool.prompt false

Then use git difftool

Just make round(x-0.5) this will always return the next rounded down Integer value of your Float. You can also easily round up by do round(x+0.5)

Try adding scrolling="no" attribute like below:

<iframe frameborder="0" scrolling="no" style="height:380px;width:6000px;border:none;" src='https://yoururl'></iframe>

i had same issues , i was trying to mount C:\Users\ folder on docker
this is how i did it Docker Toolbox command line

 $ docker run -it --name <containername> -v /c/Users:/myVolData <imagename>

Regular expression for matching everything after "net" and before ".php":

$pattern = "net([a-zA-Z0-9_]*)\.php"; 

In the above regular expression, you can find the matching group of characters enclosed by "()" to be what you are looking for.

Hope it's useful.

Using @property and @dynamic could also work. If you declare a dynamic property and don't give a matching method implementation, everything will still compile without warnings, and you'll get an unrecognized selector error at runtime if you try to access it. This essentially the same thing as calling [self doesNotRecognizeSelector:_cmd], but with far less typing.

#!/usr/bin/env python

import sys
import yaml

def main(argv):

    with open(argv[0]) as stream:
        try:
            #print(yaml.load(stream))
            return 0
        except yaml.YAMLError as exc:
            print(exc)
            return 1

if __name__ == "__main__":
    sys.exit(main(sys.argv[1:]))

Running as admin didn't help me. (also got errors with syscall: rename)

Turns out this error can also occur if files are locked by Windows.

This can occur if :

• You are actually running the project
• You have files open in both Visual Studio and VSCode.

Running as admin doesn't get around windows file locking.

I created a new project in VS2017 and then switched to VSCode to try to add more packages. After stopping the project from running and closing VS2017 it was able to complete without error

Disclaimer: I'm not exactly sure if this means running as admin isn't necessary, but try to avoid it if possible to avoid the possibility of some rogue package doing stuff it isn't meant to.

Aggregate used to sum columns in a multi dimensional integer array

        int[][] nonMagicSquare =
        {
            new int[] {  3,  1,  7,  8 },
            new int[] {  2,  4, 16,  5 },
            new int[] { 11,  6, 12, 15 },
            new int[] {  9, 13, 10, 14 }
        };

        IEnumerable<int> rowSums = nonMagicSquare
            .Select(row => row.Sum());
        IEnumerable<int> colSums = nonMagicSquare
            .Aggregate(
                (priorSums, currentRow) =>
                    priorSums.Select((priorSum, index) => priorSum + currentRow[index]).ToArray()
                );

Select with index is used within the Aggregate func to sum the matching columns and return a new Array; { 3 + 2 = 5, 1 + 4 = 5, 7 + 16 = 23, 8 + 5 = 13 }.

        Console.WriteLine("rowSums: " + string.Join(", ", rowSums)); // rowSums: 19, 27, 44, 46
        Console.WriteLine("colSums: " + string.Join(", ", colSums)); // colSums: 25, 24, 45, 42

But counting the number of trues in a Boolean array is more difficult since the accumulated type (int) differs from the source type (bool); here a seed is necessary in order to use the second overload.

        bool[][] booleanTable =
        {
            new bool[] { true, true, true, false },
            new bool[] { false, false, false, true },
            new bool[] { true, false, false, true },
            new bool[] { true, true, false, false }
        };

        IEnumerable<int> rowCounts = booleanTable
            .Select(row => row.Select(value => value ? 1 : 0).Sum());
        IEnumerable<int> seed = new int[booleanTable.First().Length];
        IEnumerable<int> colCounts = booleanTable
            .Aggregate(seed,
                (priorSums, currentRow) =>
                    priorSums.Select((priorSum, index) => priorSum + (currentRow[index] ? 1 : 0)).ToArray()
                );

        Console.WriteLine("rowCounts: " + string.Join(", ", rowCounts)); // rowCounts: 3, 1, 2, 2
        Console.WriteLine("colCounts: " + string.Join(", ", colCounts)); // colCounts: 3, 2, 1, 2

You can also do this:

NSNumber *number = @([dictionary[@"id"] intValue]]);

Have fun!

So long as your text-editors can cope with Unicode (presumably encoded in UTF-8) you can enter the Unicode code-point directly.

For instance, in the Vim text-editor you would enter insert mode and press Ctrl + V + U and then the code-point number as a 4-digit hexadecimal number (pad with zeros if necessary). So you would type Ctrl + V + U 2 6 2 0. See: What is the easiest way to insert Unicode characters into a document?

At a terminal running Bash you would type CTRL+SHIFT+U and type in the hexadecimal code-point of the character you want. During input your cursor should show an underlined u. The first non-digit you type ends input, and renders the character. So you could be able to print U+2620 in Bash using the following:

echo CTRL+SHIFT+U2620ENTERENTER

(The first enter ends Unicode input, and the second runs the echo command.)

Credit: Ask Ubuntu SE

You need to wrap them all in a character class. The current version means replace this sequence of characters with an empty string. When wrapped in square brackets it means replace any of these characters with an empty string.

var cleanString = dirtyString.replace(/[\|&;\$%@"<>\(\)\+,]/g, "");

Knowing the version of Windows and SQL Server might be helpful in some cases. From the Native Client 10.0 I infer either SQL Server 2008 or SQL Server 2008 R2.

There are a few possible things to check, but I would check to see if 'priority boost' was configured on the SQL Server. This is a deprecated setting and will eventually be removed. The problem is that it can rob the operating system of needed resources. See the notes at:

http://msdn.microsoft.com/en-in/library/ms180943(v=SQL.105).aspx

If 'priority boost' has been configured to 1, then get it configured back to 0.

exec sp_configure 'priority boost', 0;
RECONFIGURE;

Code and explanation from Pointer Basics:

The dereference operation starts at the pointer and follows its arrow over to access its pointee. The goal may be to look at the pointee state or to change the pointee state. The dereference operation on a pointer only works if the pointer has a pointee -- the pointee must be allocated and the pointer must be set to point to it. The most common error in pointer code is forgetting to set up the pointee. The most common runtime crash because of that error in the code is a failed dereference operation. In Java the incorrect dereference will be flagged politely by the runtime system. In compiled languages such as C, C++, and Pascal, the incorrect dereference will sometimes crash, and other times corrupt memory in some subtle, random way. Pointer bugs in compiled languages can be difficult to track down for this reason.

void main() {   
    int*    x;  // Allocate the pointer x
    x = malloc(sizeof(int));    // Allocate an int pointee,
                            // and set x to point to it
    *x = 42;    // Dereference x to store 42 in its pointee   
}

git reset --hard

Worked for me

For those attempting Richard's solution above, here are some additional information that might help navigate common errors:

1) When running restore filelistonly you may get Operating system error 5(Access is denied). If that's the case, open SQL Server Configuration Manager and change the login for SQLEXPRESS to a user that has local write privileges.

2) @"This will list the contents of the backup - what you need is the first fields that tell you the logical names" - if your file lists more than two headers you will need to also account for what to do with those files in the RESTORE DATABASE command. If you don't indicate what to do with files beyond the database and the log, the system will apparently try to use the attributes listed in the .bak file. Restoring a file from someone else's environment will produce a 'The path has invalid attributes. It needs to be a directory' (as the path in question doesn't exist on your machine). Simply providing a MOVE statement resolves this problem.

In my case there was a third FTData type file. The MOVE command I added:

MOVE 'mydbName_log' TO 'c:\temp\mydbName_data.ldf',
MOVE 'sysft_...' TO 'c:\temp\other';

in my case I actually had to make a new directory for the third file. Initially I tried to send it to the same folder as the .mdf file but that produced a 'failed to initialize correctly' error on the third FTData file when I executed the restore.

If you are working with Android's MediaStore database, here is how to store an image and then display it after it is saved.

on button click write this

 Intent in = new Intent(Intent.ACTION_PICK,
                    android.provider.MediaStore.Images.Media.EXTERNAL_CONTENT_URI);
            in.putExtra("crop", "true");
            in.putExtra("outputX", 100);
            in.putExtra("outputY", 100);
            in.putExtra("scale", true);
            in.putExtra("return-data", true);

            startActivityForResult(in, 1);

then do this in your activity

@Override
    protected void onActivityResult(int requestCode, int resultCode, Intent data) {
        // TODO Auto-generated method stub
        super.onActivityResult(requestCode, resultCode, data);

        if (requestCode == 1 && resultCode == RESULT_OK && data != null) {

            Bitmap bmp = (Bitmap) data.getExtras().get("data");

            img.setImageBitmap(bmp);
            btnadd.requestFocus();

            ByteArrayOutputStream baos = new ByteArrayOutputStream();
            bmp.compress(Bitmap.CompressFormat.JPEG, 100, baos);
            byte[] b = baos.toByteArray();
            String encodedImageString = Base64.encodeToString(b, Base64.DEFAULT);

            byte[] bytarray = Base64.decode(encodedImageString, Base64.DEFAULT);
            Bitmap bmimage = BitmapFactory.decodeByteArray(bytarray, 0,
                    bytarray.length);

        }

    }

public IList<Splitting> get(Guid companyId, long customrId) {    
    var res=from c in Customers_data_source
            where c.CustomerId = customrId && c.CompanyID == companyId
            from s in Splittings_data_srouce
            where s.CustomerID = c.CustomerID
            select s;

    return res.ToList();
}

Trim() will only remove leading or trailing spaces.

Try .Contains() to check if a string contains white space

"sossjjs sskkk".Contains(" ") // returns true

You are probably storing the value 0xc0 in a char variable, what is probably a signed type, and your value is negative (most significant bit set). Then, when printing, it is converted to int, and to keep the semantical equivalence, the compiler pads the extra bytes with 0xff, so the negative int will have the same numerical value of your negative char. To fix this, just cast to unsigned char when printing:

printf("%x", (unsigned char)variable);

Please follow below steps to change app icon:

1. Add your .ico file in the project.
2. Go to angular.json and in that "projects" -> "architect" -> "build" -> "options" -> "assets" and here make an entry for your icon file. Refer to the existing entry of favicon.ico to know how to do it.

3. Go to index.html and update the path of the icon file. For example,

4. Restart the server.

5. Hard refresh browser and you are good to go.

$files = glob($_SERVER["DOCUMENT_ROOT"]."/myFolder/*");

1. Implement a slot in your QMainWindow where you will open your new Window,
2. Place a widget on your QMainWindow,
3. Connect a signal from this widget to a slot from the QMainWindow (for example: if the widget is a QPushButton connect the signal click() to the QMainWindow custom slot you have created).

Code example:

MainWindow.h

// ...
include "newwindow.h"
// ...
public slots:
   void openNewWindow();
// ...
private:
   NewWindow *mMyNewWindow;
// ...
}

MainWindow.cpp

// ...
   MainWindow::MainWindow()
   {
      // ...
      connect(mMyButton, SIGNAL(click()), this, SLOT(openNewWindow()));
      // ...
   }
// ...
void MainWindow::openNewWindow()
{
   mMyNewWindow = new NewWindow(); // Be sure to destroy your window somewhere
   mMyNewWindow->show();
   // ...
}

This is an example on how display a custom new window. There are a lot of ways to do this.

function doPoll(){
    $.post('ajax/test.html', function(data) {
        alert(data);  // process results here
        setTimeout(doPoll,5000);
    });
}

A[A==NDV]=numpy.nan

A==NDV will produce a boolean array that can be used as an index for A

This is a part from a REST-Service I´ve written recently.

var select = $("#productSelect")
for (var prop in data) {
    var option = document.createElement('option');
    option.innerHTML = data[prop].ProduktName
    option.value = data[prop].ProduktName;
    select.append(option)
}

The reason why im posting this is because appendChild() wasn´t working in my case so I decided to put up another possibility that works aswell.

If you want to use for <input> it will not work, for <input> or text area you need to use Javascript

<script language="javascript" type="text/javascript">
function capitaliseName()
{
    var str = document.getElementById("name").value;
    document.getElementById("name").value = str.charAt(0).toUpperCase() + str.slice(1);

}
</script>

<textarea name="NAME" id="name" onkeydown = "capitaliseName()"></textarea>

that is supposed to work well for <input> or <textarea>

Plotly supports interactive 2D and 3D graphing. Graphs are rendered with D3.js and can be created with a Python API, matplotlib, ggplot for Python, Seaborn, prettyplotlib, and pandas. You can zoom, pan, toggle traces on and off, and see data on the hover. Plots can be embedded in HTML, apps, dashboards, and IPython Notebooks. Below is a temperature graph showing interactivity. See the gallery of IPython Notebooks tutorials for more examples.

The docs provides examples of supported plot types and code snippets.

Specifically to your question, you can also make interactive plots from NetworkX.



For 3D plotting with Python, you can make 3D scatter, line, and surface plots that are similarly interactive. Plots are rendered with WebGL. For example, see a 3D graph of UK Swap rates.

Disclosure: I'm on the Plotly team.

os.path.isfile("bob.txt") # Does bob.txt exist?  Is it a file, or a directory?
os.path.isdir("bob")

"hello _there_".replace(/_(.*?)_/, function(a, b){
    return '<div>' + b + '</div>';
})

Oh, or you could also:

"hello _there_".replace(/_(.*?)_/, "<div>$1</div>")

EDIT by Liran H: For six other people including myself, $1 did not work, whereas \1 did.

Html a tag

Link in html

 <a href="index1.php">page1</a>
 <a href="page2.php">page2</a>

Html in php

echo ' <a href="index1.php">page1</a>';
echo '<a href="page2.php">page2</a>';

I have solved this issue as follows:

removed from chrome extension and install ext again. It will work ISA

If you're using Bootstrap 4, use .w-auto.

See https://getbootstrap.com/docs/4.1/utilities/sizing/

We can use params, new feature of the UI-Router:

API Reference / ui.router.state / $stateProvider

params A map which optionally configures parameters declared in the url, or defines additional non-url parameters. For each parameter being configured, add a configuration object keyed to the name of the parameter.

See the part: "...or defines additional non-url parameters..."

So the state def would be:

$stateProvider
  .state('home', {
    url: "/home",
    templateUrl: 'tpl.html',
    params: { hiddenOne: null, }
  })

Few examples form the doc mentioned above:

// define a parameter's default value
params: {
  param1: { value: "defaultValue" }
}
// shorthand default values
params: {
  param1: "defaultValue",
  param2: "param2Default"
}

// param will be array []
params: {
  param1: { array: true }
}

// handling the default value in url:
params: {
  param1: {
    value: "defaultId",
    squash: true
} }
// squash "defaultValue" to "~"
params: {
  param1: {
    value: "defaultValue",
    squash: "~"
  } }

EXTEND - working example: http://plnkr.co/edit/inFhDmP42AQyeUBmyIVl?p=info

Here is an example of a state definition:

 $stateProvider
  .state('home', {
      url: "/home",
      params : { veryLongParamHome: null, },
      ...
  })
  .state('parent', {
      url: "/parent",
      params : { veryLongParamParent: null, },
      ...
  })
  .state('parent.child', { 
      url: "/child",
      params : { veryLongParamChild: null, },
      ...
  })

This could be a call using ui-sref:

<a ui-sref="home({veryLongParamHome:'Home--f8d218ae-d998-4aa4-94ee-f27144a21238'
  })">home</a>

<a ui-sref="parent({ 
    veryLongParamParent:'Parent--2852f22c-dc85-41af-9064-d365bc4fc822'
  })">parent</a>

<a ui-sref="parent.child({
    veryLongParamParent:'Parent--0b2a585f-fcef-4462-b656-544e4575fca5',  
    veryLongParamChild:'Child--f8d218ae-d998-4aa4-94ee-f27144a61238'
  })">parent.child</a>

Check the example here

I just went through the character map to get these. They are all in Calibri.

Number    Name                   HTML Code    Appearance
------    --------------------   ---------    ----------
U+2000    En Quad                       " "
U+2001    Em Quad                       " "
U+2002    En Space                      " "
U+2003    Em Space                      " "
U+2004    Three-Per-Em Space            " "
U+2005    Four-Per-Em Space             " "
U+2006    Six-Per-Em Space              " "
U+2007    Figure Space                  " "
U+2008    Punctuation Space             " "
U+2009    Thin Space                    " "
U+200A    Hair Space                    " "
U+200B    Zero-Width Space       ​      "​"
U+200C    Zero Width Non-Joiner  ‌      "‌"
U+200D    Zero Width Joiner      ‍      "‍"
U+200E    Left-To-Right Mark     ‎      "‎"
U+200F    Right-To-Left Mark     ‏      "‏"
U+202F    Narrow No-Break Space         " "

I used preg_match to do it.

In my case, I had a string containing exactly one <img> tag (and no other markup) that I got from Wordpress and I was trying to get the src attribute so I could run it through timthumb.

// get the featured image
$image = get_the_post_thumbnail($photos[$i]->ID);

// get the src for that image
$pattern = '/src="([^"]*)"/';
preg_match($pattern, $image, $matches);
$src = $matches[1];
unset($matches);

In the pattern to grab the title or the alt, you could simply use $pattern = '/title="([^"]*)"/'; to grab the title or $pattern = '/title="([^"]*)"/'; to grab the alt. Sadly, my regex isn't good enough to grab all three (alt/title/src) with one pass though.

A ClassCastException ocurrs when you try to cast an instance of an Object to a type that it is not. Casting only works when the casted object follows an "is a" relationship to the type you are trying to cast to. For Example

Apple myApple = new Apple();
Fruit myFruit = (Fruit)myApple;

This works because an apple 'is a' fruit. However if we reverse this.

Fruit myFruit = new Fruit();
Apple myApple = (Apple)myFruit;

This will throw a ClasCastException because a Fruit is not (always) an Apple.

It is good practice to guard any explicit casts with an instanceof check first:

if (myApple instanceof Fruit) {
  Fruit myFruit = (Fruit)myApple;
}

I also had the same error. In my case reason was I have created a update trigger on a table and under that trigger I am again updating the same table. And when I have removed the update statement from the trigger my problem has been resolved.

If you're using zsh, you can use multiple redirections, so you don't even need tee:

./cmd 1>&1 2>&2 1>out_file 2>err_file

Here you're simply redirecting each stream to itself and the target file.

Full example

% (echo "out"; echo "err">/dev/stderr) 1>&1 2>&2 1>/tmp/out_file 2>/tmp/err_file
out
err
% cat /tmp/out_file
out
% cat /tmp/err_file
err

Note that this requires the MULTIOS option to be set (which is the default).

MULTIOS

Perform implicit tees or cats when multiple redirections are attempted (see Redirection).

Comments on EntryPoint function in code

// ENTRYPOINT /usr/sbin/nginx.

// Set the entrypoint (which defaults to sh -c) to /usr/sbin/nginx.

// Will accept the CMD as the arguments to /usr/sbin/nginx.

Another reference from documents

You can use the exec form of ENTRYPOINT to set fairly stable default commands and arguments and then use CMD to set additional defaults that are more likely to be changed.

Example:

FROM ubuntu:14.04.3
ENTRYPOINT ["/bin/ping"]
CMD ["localhost", "-c", "2"]

Build: sudo docker build -t ent_cmd .

CMD arguments are easy to override.

NO argument (sudo docker -it ent_cmd)                :  ping localhost 
argument    (sudo docker run -it ent_cmd google.com) :  ping google.com

.

To override EntryPoint argument, you need to supply entrypoint
sudo docker run -it --entrypoint="/bin/bash" ent_cmdd

p.s: In presence of EntryPoint, CMD will hold arguments to fed to EntryPoint. In absense of EntryPoint, CMD will be the command which will be run.

I got the same problem! then realized that my directory was not empty. I found the solution in another thread: not able to delete the directory through Java

/**
 * Force deletion of directory
 * @param path
 * @return
 */
static public boolean deleteDirectory(File path) {
    if (path.exists()) {
        File[] files = path.listFiles();
        for (int i = 0; i < files.length; i++) {
            if (files[i].isDirectory()) {
                deleteDirectory(files[i]);
            } else {
                files[i].delete();
            }
        }
    }
    return (path.delete());
}

JsonConvert.SerializeObject(ObjectName, new JsonSerializerSettings(){ PreserveReferencesHandling = PreserveReferencesHandling.Objects, Formatting = Formatting.Indented });

if you install git with git bash, you get SCP available on windows.

You can't define an object literal with a dynamic key. Do this :

var o = {};
o[key] = value;
return o;

There's no shortcut (edit: there's one now, with ES6, see the other answer).

Here is a DLL that shows:
* Hard drive ID (unique hardware serial number written in drive's IDE electronic chip)
* Partition ID (volume serial number)
* CPU ID (unique hardware ID)
* CPU vendor
* CPU running speed
* CPU theoretic speed
* Memory Load ( Total memory used in percentage (%) )
* Total Physical ( Total physical memory in bytes )
* Avail Physical ( Physical memory left in bytes )
* Total PageFile ( Total page file in bytes )
* Available PageFile( Page file left in bytes )
* Total Virtual( Total virtual memory in bytes )
* Available Virtual ( Virtual memory left in bytes )
* Bios unique identification numberBiosDate
* Bios unique identification numberBiosVersion
* Bios unique identification numberBiosProductID
* Bios unique identification numberBiosVideo

(text grabbed from original web site)
It works with C#.

Struggled to find this as well.

Heres a screenshot of how to do it:

new Chart('idName', {
      type: 'typeChar',
      data: data,
      options: {
        legend: {
          display: false
        }
      }
    });

In addition to the other answers, the fmod documentation has some interesting things to say on the subject:

math.fmod(x, y)

Return fmod(x, y), as defined by the platform C library. Note that the Python expression x % y may not return the same result. The intent of the C standard is that fmod(x, y) be exactly (mathematically; to infinite precision) equal to x - n*y for some integer n such that the result has the same sign as x and magnitude less than abs(y). Python’s x % y returns a result with the sign of y instead, and may not be exactly computable for float arguments. For example, fmod(-1e-100, 1e100) is -1e-100, but the result of Python’s -1e-100 % 1e100 is 1e100-1e-100, which cannot be represented exactly as a float, and rounds to the surprising 1e100. For this reason, function fmod() is generally preferred when working with floats, while Python’s x % y is preferred when working with integers.

I had same problem in the render() method. The problem comes when you return from render() as :

render() {
    return 
    (
        <div>Here comes JSX !</div>
    );
}

i.e. if you start the parenthesis in a new line

Try using:

render() {
    return (
        <div>Here comes JSX !</div>
    );
}

This will solve the error

modify your bash profile as follows <>$vim ~/.bash_profile export PATH=/usr/local/mysql/bin:$PATH Once its saved you can type in mysql to bring mysql prompt in your terminal.

There is also a really simple way to do this with the help of the RecursiveTreeIterator class, answered here: https://stackoverflow.com/a/37548504/2032235

Are you using Forms authentication?

Forms authentication uses it own value for timeout (30 min. by default). A forms authentication timeout will send the user to the login page with the session still active. This may look like the behavior your app gives when session times out making it easy to confuse one with the other.

<system.web>
    <authentication mode="Forms">
          <forms timeout="50"/>
    </authentication>

    <sessionState timeout="60"  />
</system.web>

Setting the forms timeout to something less than the session timeout can give the user a window in which to log back in without losing any session data.

With argc (argument count) and argv (argument vector) you can get the number and the values of passed arguments when your application has been launched.

This way you can use parameters (such as -version) when your application is started to act a different way.

But you can also use int main(void) as a prototype in C.

There is a third (less known and nonstandard) prototype with a third argument which is envp. It contains environment variables.

Resources:

• Wikipedia - Main function, C and C++

Run the script as source= to run in debug mode as well.

source= ./myscript.sh

Take a look in .git/config and make the changes you need.

Alternatively you could use

git remote rm [name of the url you sets on adding]

and

git remote add [name] [URL]

Or just

git remote set-url [URL]

Before you do anything wrong, double check with

git help remote

If you use Sqlite's REGEXP support ( see the answer at Problem with regexp python and sqlite for how to do that ) , then you can do it easily in one clause:

SELECT word FROM table WHERE word NOT REGEXP '[abc]';

As others said, if means nothing as of C++14, so let's consider the __restrict__ GCC extension which does the same as the C99 restrict.

C99

restrict says that two pointers cannot point to overlapping memory regions. The most common usage is for function arguments.

This restricts how the function can be called, but allows for more compile optimizations.

If the caller does not follow the restrict contract, undefined behavior.

The C99 N1256 draft 6.7.3/7 "Type qualifiers" says:

The intended use of the restrict qualifier (like the register storage class) is to promote optimization, and deleting all instances of the qualifier from all preprocessing translation units composing a conforming program does not change its meaning (i.e., observable behavior).

and 6.7.3.1 "Formal definition of restrict" gives the gory details.

A possible optimization

The Wikipedia example is very illuminating.

It clearly shows how as it allows to save one assembly instruction.

Without restrict:

void f(int *a, int *b, int *x) {
  *a += *x;
  *b += *x;
}

Pseudo assembly:

load R1 ? *x    ; Load the value of x pointer
load R2 ? *a    ; Load the value of a pointer
add R2 += R1    ; Perform Addition
set R2 ? *a     ; Update the value of a pointer
; Similarly for b, note that x is loaded twice,
; because x may point to a (a aliased by x) thus 
; the value of x will change when the value of a
; changes.
load R1 ? *x
load R2 ? *b
add R2 += R1
set R2 ? *b

With restrict:

void fr(int *restrict a, int *restrict b, int *restrict x);

Pseudo assembly:

load R1 ? *x
load R2 ? *a
add R2 += R1
set R2 ? *a
; Note that x is not reloaded,
; because the compiler knows it is unchanged
; "load R1 ? *x" is no longer needed.
load R2 ? *b
add R2 += R1
set R2 ? *b

Does GCC really do it?

g++ 4.8 Linux x86-64:

g++ -g -std=gnu++98 -O0 -c main.cpp
objdump -S main.o

With -O0, they are the same.

With -O3:

void f(int *a, int *b, int *x) {
    *a += *x;
   0:   8b 02                   mov    (%rdx),%eax
   2:   01 07                   add    %eax,(%rdi)
    *b += *x;
   4:   8b 02                   mov    (%rdx),%eax
   6:   01 06                   add    %eax,(%rsi)  

void fr(int *__restrict__ a, int *__restrict__ b, int *__restrict__ x) {
    *a += *x;
  10:   8b 02                   mov    (%rdx),%eax
  12:   01 07                   add    %eax,(%rdi)
    *b += *x;
  14:   01 06                   add    %eax,(%rsi) 

For the uninitiated, the calling convention is:

• rdi = first parameter
• rsi = second parameter
• rdx = third parameter

GCC output was even clearer than the wiki article: 4 instructions vs 3 instructions.

Arrays

So far we have single instruction savings, but if pointer represent arrays to be looped over, a common use case, then a bunch of instructions could be saved, as mentioned by supercat and michael.

Consider for example:

void f(char *restrict p1, char *restrict p2, size_t size) {
     for (size_t i = 0; i < size; i++) {
         p1[i] = 4;
         p2[i] = 9;
     }
 }

Because of restrict, a smart compiler (or human), could optimize that to:

memset(p1, 4, size);
memset(p2, 9, size);

Which is potentially much more efficient as it may be assembly optimized on a decent libc implementation (like glibc) Is it better to use std::memcpy() or std::copy() in terms to performance?, possibly with SIMD instructions.

Without, restrict, this optimization could not be done, e.g. consider:

char p1[4];
char *p2 = &p1[1];
f(p1, p2, 3);

Then for version makes:

p1 == {4, 4, 4, 9}

while the memset version makes:

p1 == {4, 9, 9, 9}

Does GCC really do it?

GCC 5.2.1.Linux x86-64 Ubuntu 15.10:

gcc -g -std=c99 -O0 -c main.c
objdump -dr main.o

With -O0, both are the same.

With -O3:

• with restrict:

  3f0:   48 85 d2                test   %rdx,%rdx
  3f3:   74 33                   je     428 <fr+0x38>
  3f5:   55                      push   %rbp
  3f6:   53                      push   %rbx
  3f7:   48 89 f5                mov    %rsi,%rbp
  3fa:   be 04 00 00 00          mov    $0x4,%esi
  3ff:   48 89 d3                mov    %rdx,%rbx
  402:   48 83 ec 08             sub    $0x8,%rsp
  406:   e8 00 00 00 00          callq  40b <fr+0x1b>
                          407: R_X86_64_PC32      memset-0x4
  40b:   48 83 c4 08             add    $0x8,%rsp
  40f:   48 89 da                mov    %rbx,%rdx
  412:   48 89 ef                mov    %rbp,%rdi
  415:   5b                      pop    %rbx
  416:   5d                      pop    %rbp
  417:   be 09 00 00 00          mov    $0x9,%esi
  41c:   e9 00 00 00 00          jmpq   421 <fr+0x31>
                          41d: R_X86_64_PC32      memset-0x4
  421:   0f 1f 80 00 00 00 00    nopl   0x0(%rax)
  428:   f3 c3                   repz retq
  

  Two memset calls as expected.

• without restrict: no stdlib calls, just a 16 iteration wide loop unrolling which I do not intend to reproduce here :-)

I haven't had the patience to benchmark them, but I believe that the restrict version will be faster.

Strict aliasing rule

The restrict keyword only affects pointers of compatible types (e.g. two int*) because the strict aliasing rules says that aliasing incompatible types is undefined behavior by default, and so compilers can assume it does not happen and optimize away.

See: What is the strict aliasing rule?

Does it work for references?

According to the GCC docs it does: https://gcc.gnu.org/onlinedocs/gcc-5.1.0/gcc/Restricted-Pointers.html with syntax:

int &__restrict__ rref

There is even a version for this of member functions:

void T::fn () __restrict__

I wrote this javascript script and included it in the header (before anything loads). It seems to work. If the page was loaded more than one hour ago or the situation is undefined it will reload everything from server. The time of one hour = 3600000 milliseconds can be changed in the following line: if(alter > 3600000)

With regards, Birke

<script type="text/javascript">
//<![CDATA[
function zeit()
{
    if(document.cookie)
    {
        a = document.cookie;
        cookiewert = "";
        while(a.length > 0)
        {
            cookiename = a.substring(0,a.indexOf('='));
            if(cookiename == "zeitstempel")
            {
                cookiewert = a.substring(a.indexOf('=')+1,a.indexOf(';'));
                break;
            }
            a = a.substring(a.indexOf(cookiewert)+cookiewert.length+1,a.length);
        }
        if(cookiewert.length > 0)
        {
            alter = new Date().getTime() - cookiewert;

            if(alter > 3600000)
            {   
                document.cookie = "zeitstempel=" + new Date().getTime() + ";";
                location.reload(true);
            }
            else
            {
                return;
            }
        }
        else
        {
            document.cookie = "zeitstempel=" + new Date().getTime() + ";";
            location.reload(true);
        }
    }
    else
    {
        document.cookie = "zeitstempel=" + new Date().getTime() + ";";
        location.reload(true);
    }
}
zeit();
//]]>
</script>

System.Reflection.Assembly.GetEntryAssembly().Location;

You can get the duplicated like this :

List<Integer> numbers = Arrays.asList(1, 2, 1, 3, 4, 4);
Set<Integer> duplicated = numbers
  .stream()
  .filter(n -> numbers
        .stream()
        .filter(x -> x == n)
        .count() > 1)
   .collect(Collectors.toSet());

Instead of downloading curl, down libcurl.

curl is just the application, libcurl is what you need for your C++ program

http://packages.ubuntu.com/quantal/curl

The easiest way to do it is to add mb-5 to your classes. That is <div class='row mb-5'>.

NOTE:

• mb varies betweeen 1 to 5
• The Div MUST have the row class

Plain old Java on plain old Java 7 and no other dependencies demonstrates the difference...

I put file.txt in c:\temp\ and I put c:\temp\ on the classpath.

There is only one case where there is a difference between the two call.

class J {

 public static void main(String[] a) {
    // as "absolute"

    // ok   
    System.err.println(J.class.getResourceAsStream("/file.txt") != null); 

    // pop            
    System.err.println(J.class.getClassLoader().getResourceAsStream("/file.txt") != null); 

    // as relative

    // ok
    System.err.println(J.class.getResourceAsStream("./file.txt") != null); 

    // ok
    System.err.println(J.class.getClassLoader().getResourceAsStream("./file.txt") != null); 

    // no path

    // ok
    System.err.println(J.class.getResourceAsStream("file.txt") != null); 

   // ok
   System.err.println(J.class.getClassLoader().getResourceAsStream("file.txt") != null); 
  }
}

You should take a look at Popcorn.js - a javascript framework for interacting with Html5 : http://popcornjs.org/documentation

It happens to me only when modifying the XML files on the project. If you rebuild the entire project before running (Build > Rebuild Project) it doesn't show up anymore.

A convinient way is using the package python-dotenv: It reads out a .flaskenv file where you can store environment variables for flask.

• pip install python-dotenv
• create a file .flaskenv in the root directory of your app

Inside the file you specify:

FLASK_APP=application.py
FLASK_RUN_HOST=localhost
FLASK_RUN_PORT=80

After that you just have to run your app with flask run and can access your app at that port.

Please note that FLASK_RUN_HOST defaults to 127.0.0.1 and FLASK_RUN_PORT defaults to 5000.

Well, found a solution to my problem; Updating all rows using a SQL query and a SQL Task in SSIS Like Below. May help others if they face same challenge in future.

update Original 
set Original.Vaal= t.vaal 
from Original join (select * from staging1  union   select * from staging2) t 
on Original.id=t.id

In Oracle 11g, if you want to search any text in whole database or procedure below mentioned query can be used:

select * from user_source WHERE UPPER(text) LIKE '%YOUR SAGE%'

JSON.stringify takes more optional arguments.

Try:

 JSON.stringify({a:1,b:2,c:{d:1,e:[1,2]}}, null, 4); // Indented 4 spaces
 JSON.stringify({a:1,b:2,c:{d:1,e:[1,2]}}, null, "\t"); // Indented with tab

From:

How can I beautify JSON programmatically?

Should work in modern browsers, and it is included in json2.js if you need a fallback for browsers that don't support the JSON helper functions. For display purposes, put the output in a <pre> tag to get newlines to show.

Under Apache 2+ you can simply do as below (Using Linux Terminal):

sudo a2enmod rewrite && sudo service apache2 restart

or

sudo a2enmod rewrite && sudo /etc/init.d/apache2 restart

Inline functions are faster because you don't need to push and pop things on/off the stack like parameters and the return address; however, it does make your binary slightly larger.

Does it make a significant difference? Not noticeably enough on modern hardware for most. But it can make a difference, which is enough for some people.

Marking something inline does not give you a guarantee that it will be inline. It's just a suggestion to the compiler. Sometimes it's not possible such as when you have a virtual function, or when there is recursion involved. And sometimes the compiler just chooses not to use it.

I could see a situation like this making a detectable difference:

inline int aplusb_pow2(int a, int b) {
  return (a + b)*(a + b) ;
}

for(int a = 0; a < 900000; ++a)
    for(int b = 0; b < 900000; ++b)
        aplusb_pow2(a, b);

You could just use VideoLAN. VideoLAN will work as a server (or you can wrap your own C# application around it for more control). There are also .NET wrappers for the viewer that you can use and thus embed in your C# client.

There is a comprehensive list of tools on the PostgreSQL Wiki:

https://wiki.postgresql.org/wiki/PostgreSQL_Clients

And of course PostgreSQL itself comes with pgAdmin, a GUI tool for accessing Postgres databases.

The following is an instantiation of the various "just print it" suggestions. I found it instructive.

#include "stdio.h"

int main() {
    static int x = 5;
    static int *p = &x;
    printf("(int) p   => %d\n",(int) p);
    printf("(int) p++ => %d\n",(int) p++);
    x = 5; p = &x;
    printf("(int) ++p => %d\n",(int) ++p);
    x = 5; p = &x;
    printf("++*p      => %d\n",++*p);
    x = 5; p = &x;
    printf("++(*p)    => %d\n",++(*p));
    x = 5; p = &x;
    printf("++*(p)    => %d\n",++*(p));
    x = 5; p = &x;
    printf("*p++      => %d\n",*p++);
    x = 5; p = &x;
    printf("(*p)++    => %d\n",(*p)++);
    x = 5; p = &x;
    printf("*(p)++    => %d\n",*(p)++);
    x = 5; p = &x;
    printf("*++p      => %d\n",*++p);
    x = 5; p = &x;
    printf("*(++p)    => %d\n",*(++p));
    return 0;
}

It returns

(int) p   => 256688152
(int) p++ => 256688152
(int) ++p => 256688156
++*p      => 6
++(*p)    => 6
++*(p)    => 6
*p++      => 5
(*p)++    => 5
*(p)++    => 5
*++p      => 0
*(++p)    => 0

I cast the pointer addresses to ints so they could be easily compared.

I compiled it with GCC.

try this code it doesn't show “For development purposes only”

<iframe src="http://maps.google.com/maps?q=25.3076008,51.4803216&z=16&output=embed" height="450" width="600"></iframe>

Go to project directory and run the command:

cd android && ./gradlew assembleRelease

I had this same issue where I wanted to initialize my MySQL Docker instance's schema, but I ran into difficulty getting this working after doing some Googling and following others' examples. Here's how I solved it.

1) Dump your MySQL schema to a file.

mysqldump -h <your_mysql_host> -u <user_name> -p --no-data <schema_name> > schema.sql

2) Use the ADD command to add your schema file to the /docker-entrypoint-initdb.d directory in the Docker container. The docker-entrypoint.sh file will run any files in this directory ending with ".sql" against the MySQL database.

Dockerfile:

FROM mysql:5.7.15

MAINTAINER me

ENV MYSQL_DATABASE=<schema_name> \
    MYSQL_ROOT_PASSWORD=<password>

ADD schema.sql /docker-entrypoint-initdb.d

EXPOSE 3306

3) Start up the Docker MySQL instance.

docker-compose build
docker-compose up

Thanks to Setting up MySQL and importing dump within Dockerfile for clueing me in on the docker-entrypoint.sh and the fact that it runs both SQL and shell scripts!

You can simply do the following inside your TR loop:

$(this).find('td').each (function() {
  // do your cool stuff
});                          

An other approach is to use a Virtual JDBC Driver that uses a three-tier architecture: your JDBC code is sent through HTTP to a remote Servlet that filters the JDBC code (configuration & security) before passing it to the MySql JDBC Driver. The result is sent you back through HTTP. There are some free software that use this technique. Just Google "Android JDBC Driver over HTTP".

For the height of a div to be responsive, it must be inside a parent element with a defined height to derive it's relative height from.

If you set the height of the container holding the image and text box on the right, you can subsequently set the heights of its two children to be something like 75% and 25%.

However, this will get a bit tricky when the site layout gets narrower and things will get wonky. Try setting the padding on .contentBg to something like 5.5%.

My suggestion is to use Media Queries to tweak the padding at different screen sizes, then bump everything into a single column when appropriate.

All above answers are correct here is another way with screenshot too.

From Chrome :

1. Right click "inspect" on the item you are trying to find the xpath
2. Right click on the highlighted area on the console.
3. Go to Copy xpath

You could do

[A1].Value = "'O1/01/13 00:00"

if you really mean to add it as text (note the apostrophe as the first character).

The [A1].Value is VBA shorthand for Range("A1").Value.

If you want to enter a date, you could instead do (edited order with thanks to @SiddharthRout):

[A1].NumberFormat = "mm/dd/yyyy hh:mm;@"
[A1].Value = DateValue("01/01/2013 00:00")

My first post... UDF I managed quickly to compile. Usage: Select 3D range as normal and enclose is into quotation marks like below...

=CountIf3D("'StartSheet:EndSheet'!G16:G878";"Criteria")

Advisably sheets to be adjacent to avoid unanticipated results.

Public Function CountIf3D(SheetstoCount As String, CriteriaToUse As Variant)

     Dim sStarSheet As String, sEndSheet As String, sAddress As String
     Dim lColonPos As Long, lExclaPos As Long, cnt As Long

    lColonPos = InStr(SheetstoCount, ":") 'Finding ':' separating sheets
    lExclaPos = InStr(SheetstoCount, "!") 'Finding '!' separating address from the sheets

    sStarSheet = Mid(SheetstoCount, 2, lColonPos - 2) 'Getting first sheet's name
    sEndSheet = Mid(SheetstoCount, lColonPos + 1, lExclaPos - lColonPos - 2) 'Getting last sheet's name

    sAddress = Mid(SheetstoCount, lExclaPos + 1, Len(SheetstoCount) - lExclaPos) 'Getting address

        cnt = 0
   For i = Sheets(sStarSheet).Index To Sheets(sEndSheet).Index
        cnt = cnt + Application.CountIf(Sheets(i).Range(sAddress), CriteriaToUse)
   Next

   CountIf3D = cnt

End Function

SELECT * FROM Accounts WHERE Username LIKE '%$query%'

but it's not suggested. use PDO

Use notepad ++ . you can find them easily

http://notepad-plus-plus.org/download/

Or you can View source from FIREfox - Unclosed divs will be shown in RED

In order to check the absence of physical sockets run:

wmic cpu get SocketDesignation

I was searching for similar solution. The replies here and the Tutorial on top is informative. I studied posts/blogs referred here to build mine successful. I am posting complete CMakeLists.txt worked for me. I guess, this would be helpful as a basic template for beginners.

"CMakeLists.txt"

cmake_minimum_required(VERSION 3.10.2)

# Target Project
project (ClientProgram)

# Begin: Including Sources and Headers
include_directories(include)
file (GLOB SOURCES "src/*.c")
# End: Including Sources and Headers


# Begin: Generate executables
add_executable (ClientProgram ${SOURCES})
# End: Generate executables


# This Project Depends on External Project(s) 
include (ExternalProject)

# Begin: External Third Party Library
set (libTLS ThirdPartyTlsLibrary)
ExternalProject_Add (${libTLS}
PREFIX          ${CMAKE_CURRENT_BINARY_DIR}/${libTLS}
# Begin: Download Archive from Web Server
URL             http://myproject.com/MyLibrary.tgz
URL_HASH        SHA1=<expected_sha1sum_of_above_tgz_file>
DOWNLOAD_NO_PROGRESS ON
# End: Download Archive from Web Server

# Begin: Download Source from GIT Repository
#    GIT_REPOSITORY  https://github.com/<project>.git
#    GIT_TAG         <Refer github.com releases -> Tags>
#    GIT_SHALLOW     ON
# End: Download Source from GIT Repository

# Begin: CMAKE Comamnd Argiments
CMAKE_ARGS      -DCMAKE_INSTALL_PREFIX:PATH=${CMAKE_CURRENT_BINARY_DIR}/${libTLS}
CMAKE_ARGS      -DUSE_SHARED_LIBRARY:BOOL=ON
# End: CMAKE Comamnd Argiments    
)

# The above ExternalProject_Add(...) construct wil take care of \
# 1. Downloading sources
# 2. Building Object files
# 3. Install under DCMAKE_INSTALL_PREFIX Directory

# Acquire Installation Directory of 
ExternalProject_Get_Property (${libTLS} install_dir)

# Begin: Importing Headers & Library of Third Party built using ExternalProject_Add(...)
# Include PATH that has headers required by Target Project
include_directories (${install_dir}/include)

# Import librarues from External Project required by Target Project
add_library (lmytls SHARED IMPORTED)
set_target_properties (lmytls PROPERTIES IMPORTED_LOCATION ${install_dir}/lib/libmytls.so)
add_library (lmyxdot509 SHARED IMPORTED)
set_target_properties(lmyxdot509 PROPERTIES IMPORTED_LOCATION ${install_dir}/lib/libmyxdot509.so)

# End: Importing Headers & Library of Third Party built using ExternalProject_Add(...)
# End: External Third Party Library

# Begin: Target Project depends on Third Party Component
add_dependencies(ClientProgram ${libTLS})
# End: Target Project depends on Third Party Component

# Refer libraries added above used by Target Project
target_link_libraries (ClientProgram lmytls lmyxdot509)

Try this out to execute a command on 30th March 2011 at midnight:

0 0 30 3 ? 2011  /command

WARNING: As noted in comments, the year column is not supported in standard/default implementations of cron. Please refer to TomOnTime answer below, for a proper way to run a script at a specific time in the future in standard implementations of cron.

Just in case you're using .NET 2.0 and don't have access to LINQ:

 static T First<T>(IEnumerable<T> items)
 {
     using(IEnumerator<T> iter = items.GetEnumerator())
     {
         iter.MoveNext();
         return iter.Current;
     }
 }

This should do what you're looking for...it uses generics so you to get the first item on any type IEnumerable.

Call it like so:

List<string> items = new List<string>() { "A", "B", "C", "D", "E" };
string firstItem = First<string>(items);

Or

int[] items = new int[] { 1, 2, 3, 4, 5 };
int firstItem = First<int>(items);

You could modify it readily enough to mimic .NET 3.5's IEnumerable.ElementAt() extension method:

static T ElementAt<T>(IEnumerable<T> items, int index)
{
    using(IEnumerator<T> iter = items.GetEnumerator())
    {
        for (int i = 0; i <= index; i++, iter.MoveNext()) ;
        return iter.Current;
    }
} 

Calling it like so:

int[] items = { 1, 2, 3, 4, 5 };
int elemIdx = 3;
int item = ElementAt<int>(items, elemIdx);

Of course if you do have access to LINQ, then there are plenty of good answers posted already...

Try it this way...

I am considering the HashMap with key and value of type String, HashMap<String,String>

HashMap<String,String> hmap = new HashMap<String,String>();

hmap.put("key1","Val1");
hmap.put("key2","Val2");

ArrayList<String> arList = new ArrayList<String>();

for(Map.Entry<String,String> map : hmap.entrySet()){

     arList.add(map.getValue());

}

Late to the party, but might be of interest...

I find a combination of labs and guides specification useful in many cases:

You want nothing but a grid and a background:

ggplot(diamonds, mapping = aes(x = clarity)) + 
  geom_bar(aes(fill = cut)) + 
  labs(x = NULL, y = NULL) + 
  guides(x = "none", y = "none")

You want to only suppress the tick-mark label of one or both axes:

ggplot(diamonds, mapping = aes(x = clarity)) + 
  geom_bar(aes(fill = cut)) + 
  guides(x = "none", y = "none")

I have found one solution, where admin()/others didn't worked.

const { promisify } = require('util');
const exec = promisify(require('child_process').exec)
async function test() {
  var res = await exec('mongo  --eval "db.adminCommand( { listDatabases: 1 }         
)" --quiet')
  return { res }
}

test()
  .then(resp => {
    console.log('All dbs', JSON.parse(resp.res.stdout).databases)
  })
test()

Cells(1,1).Select

It will take you to cell A1, thereby canceling your existing selection.

There were two conditions that caused the expression ((var++)) to fail for me:

1. If I set bash to strict mode (set -euo pipefail) and if I start my increment at zero (0).

2. Starting at one (1) is fine but zero causes the increment to return "1" when evaluating "++" which is a non-zero return code failure in strict mode.

I can either use ((var+=1)) or var=$((var+1)) to escape this behavior

You can use the datetime module for working with dates and times in Python. The strftime method allows you to produce string representation of dates and times with a format you specify.

>>> import datetime
>>> datetime.date.today().strftime("%B %d, %Y")
'July 23, 2010'
>>> datetime.datetime.now().strftime("%I:%M%p on %B %d, %Y")
'10:36AM on July 23, 2010'

For a Windows machine start the mongod process by specifying the dbpath:

mongod --dbpath \mongodb\data

Reference: Manage mongod Processes

Windows:

pip install selenium

Unix:

sudo pip install selenium

You can turn off minification in your bundles simply by Clearing your transforms.

var scriptBundle = new ScriptBundle("~/bundles/scriptBundle");
...
scriptBundle.Transforms.Clear();

I personally found this useful when wanting to bundle all my scripts in a single file but needed readability during debugging phases.

Swift 3

I might be late in the answer but for swift 3 you can do it this way:

override func viewDidLoad() {
    super.viewDidLoad()

    navigationItem.leftBarButtonItem = UIBarButtonItem(title: "< Back", style: .plain, target: self, action: #selector(backAction))

    // Do any additional setup if required.
}

func backAction(){
    //print("Back Button Clicked")
    dismiss(animated: true, completion: nil)
}

The best threads tutorial I know of is here:

https://computing.llnl.gov/tutorials/pthreads/

I like that it's written about the API, rather than about a particular implementation, and it gives some nice simple examples to help you understand synchronization.

Try like this as well

covertPostSub("/xyz/test.jsp","?param1=param1&param2=param2","_self","true");
covertPostSub("/xyz/test.jsp","?param1=param1&param2=param2","_blank","true");

var convPop = null;
function covertPostSub(action,paramsTosend,targetIframe,isWindow){
    var Popup = null;
    var form = document.createElement("form");
    form.setAttribute("method", "POST");
    form.setAttribute("id","TheForm");
    form.setAttribute("action", action);
    form.setAttribute("target", targetIframe);
    var params = paramsTosend;
    params = params.substring(1, params.length);
    params = params.split("&");
    for(var key=0; key<params.length; key++) {
        var sa = params[key];
        sa = sa.split("=");
        var xs = (sa[1]);

        if(params.hasOwnProperty(key)) {
            var hiddenField = document.createElement("input");
            hiddenField.setAttribute("type", "hidden");
            hiddenField.setAttribute("name", sa[0]);
            hiddenField.setAttribute("value",xs);

            form.appendChild(hiddenField);
         }
    }
    document.body.appendChild(form);
    form.style.display = "none";
    if(isWindow){
        window.open('', "formpopup","width=900,height=590,toolbar=no,scrollbars=yes,resizable=no,location=0,directories=0,status=1,menubar=0,left=60,top=60");
        form.target = 'formpopup';
        form.submit();
    }else{
        form.submit();
    }

}

Just add this code to your image css

 body{
 background:
        /* top, transparent black, faked with gradient */ 
        linear-gradient(
          rgba(0, 0, 0, 0.7), 
          rgba(0, 0, 0, 0.7)
        ),
        /* bottom, image */
        url(https://images.unsplash.com/photo-1614030424754-24d0eebd46b2);
    }

Reference: linear-gradient() - CSS | MDN

UPDATE: Not all browsers support RGBa, so you should have a 'fallback color'. This color will be most likely be solid (fully opaque) ex:background:rgb(96, 96, 96). Refer to this blog for RGBa browser support.

USEFUL:

Use the official Angular Update Guide select your current version and the version you wish to upgrade to for the relevant upgrade guide. https://update.angular.io/

See GitHub repository Angular CLI diff for comparing Angular CLI changes. https://github.com/cexbrayat/angular-cli-diff/

UPDATED 26/12/2018:

Use the official Angular Update Guide mentioned in the useful section above. It provides the most up to date information with links to other resources that may be useful during the upgrade.

UPDATED 08/05/2018:

Angular CLI 1.7 introduced ng update.

ng update

A new Angular CLI command to help simplify keeping your projects up to date with the latest versions. Packages can define logic which will be applied to your projects to ensure usage of latest features as well as making changes to reduce or eliminate the impact related to breaking changes.

Configuration information for ng update can be found here

1.7 to 6 update

CLI 1.7 does not support an automatic v6 update. Manually install @angular/cli via your package manager, then run the update migration schematic to finish the process.

npm install @angular/cli@^6.0.0
ng update @angular/cli --migrate-only --from=1

UPDATED 30/04/2017:

1.0 Update

You should now follow the Angular CLI migration guide

UPDATED 04/03/2017:

RC Update

You should follow the Angular CLI RC migration guide

UPDATED 20/02/2017:

Please be aware 1.0.0-beta.32 has breaking changes and has removed ng init and ng update

The pull request here states the following:

BREAKING CHANGE: Removing the ng init & ng update commands because their current implementation causes more problems than it solves. Update functionality will return to the CLI, until then manual updates of applications will need done.

The angular-cli CHANGELOG.md states the following:

BREAKING CHANGES - @angular/cli: Removing the ng init & ng update commands because their current implementation causes more problems than it solves. Once RC is released, we won't need to use those to update anymore as the step will be as simple as installing the latest version of the CLI.

UPDATED 17/02/2017:

Angular-cli has now been added to the NPM @angular package. You should now replace the above command with the following -

Global package:

npm uninstall -g angular-cli @angular/cli
npm cache clean
npm install -g @angular/cli@latest

Local project package:

rm -rf node_modules dist # On Windows use rmdir /s /q node_modules dist
npm install --save-dev @angular/cli@latest
npm install
ng init

ORIGINAL ANSWER

You should follow the steps from the README.md on GitHub for updating angular via the angular-cli.

Here they are:

Updating angular-cli

To update angular-cli to a new version, you must update both the global package and your project's local package.

Global package:

npm uninstall -g angular-cli
npm cache clean
npm install -g angular-cli@latest

Local project package:

rm -rf node_modules dist tmp # On Windows use rmdir /s /q node_modules dist tmp
npm install --save-dev angular-cli@latest
npm install
ng init

Running ng init will check for changes in all the auto-generated files created by ng new and allow you to update yours. You are offered four choices for each changed file: y (overwrite), n (don't overwrite), d (show diff between your file and the updated file) and h (help).

Carefully read the diffs for each code file, and either accept the changes or incorporate them manually after ng init finishes.

Like you I also faced many problems implementing OCR in Android, but after much Googling I found the solution, and it surely is the best example of OCR.

Let me explain using step-by-step guidance.

First, download the source code from https://github.com/rmtheis/tess-two.

Import all three projects. After importing you will get an error. To solve the error you have to create a res folder in the tess-two project

First, just create res folder in tess-two by tess-two->RightClick->new Folder->Name it "res"

After doing this in all three project the error should be gone.

Now download the source code from https://github.com/rmtheis/android-ocr, here you will get best example.

Now you just need to import it into your workspace, but first you have to download android-ndk from this site:

http://developer.android.com/tools/sdk/ndk/index.html i have windows 7 - 32 bit PC so I have download http://dl.google.com/android/ndk/android-ndk-r9-windows-x86.zip this file

Now extract it suppose I have extract it into E:\Software\android-ndk-r9 so I will set this path on Environment Variable

Right Click on MyComputer->Property->Advance-System-Settings->Advance->Environment Variable-> find PATH on second below Box and set like path like below picture

done it

Now open cmd and go to on D:\Android Workspace\tess-two like below

If you have successfully set up environment variable of NDK then just type ndk-build just like above picture than enter you will not get any kind of error and all file will be compiled successfully:

Now download other source code also from https://github.com/rmtheis/tess-two , and extract and import it and give it name OCRTest, like in my PC which is in D:\Android Workspace\OCRTest

Import test-two in this and run OCRTest and run it; you will get the best example of OCR.

Try this, its working in FF

body,
input,
select,
button {
 font-family: Arial,Helvetica,sans-serif;
 font-size: 14px;
}

Don't use CREATE TYPE to return a polymorphic result. Use and abuse the RECORD type instead. Check it out:

CREATE FUNCTION test_ret(a TEXT, b TEXT) RETURNS RECORD AS $$
DECLARE 
  ret RECORD;
BEGIN
  -- Arbitrary expression to change the first parameter
  IF LENGTH(a) < LENGTH(b) THEN
      SELECT TRUE, a || b, 'a shorter than b' INTO ret;
  ELSE
      SELECT FALSE, b || a INTO ret;
  END IF;
RETURN ret;
END;$$ LANGUAGE plpgsql;

Pay attention to the fact that it can optionally return two or three columns depending on the input.

test=> SELECT test_ret('foo','barbaz');
             test_ret             
----------------------------------
 (t,foobarbaz,"a shorter than b")
(1 row)

test=> SELECT test_ret('barbaz','foo');
             test_ret             
----------------------------------
 (f,foobarbaz)
(1 row)

This does wreak havoc on code, so do use a consistent number of columns, but it's ridiculously handy for returning optional error messages with the first parameter returning the success of the operation. Rewritten using a consistent number of columns:

CREATE FUNCTION test_ret(a TEXT, b TEXT) RETURNS RECORD AS $$
DECLARE 
  ret RECORD;
BEGIN
  -- Note the CASTING being done for the 2nd and 3rd elements of the RECORD
  IF LENGTH(a) < LENGTH(b) THEN
      ret := (TRUE, (a || b)::TEXT, 'a shorter than b'::TEXT);
  ELSE
      ret := (FALSE, (b || a)::TEXT, NULL::TEXT);
   END IF;
RETURN ret;
END;$$ LANGUAGE plpgsql;

Almost to epic hotness:

test=> SELECT test_ret('foobar','bar');
   test_ret    
----------------
 (f,barfoobar,)
(1 row)

test=> SELECT test_ret('foo','barbaz');
             test_ret             
----------------------------------
 (t,foobarbaz,"a shorter than b")
(1 row)

But how do you split that out in to multiple rows so that your ORM layer of choice can convert the values in to your language of choice's native data types? The hotness:

test=> SELECT a, b, c FROM test_ret('foo','barbaz') AS (a BOOL, b TEXT, c TEXT);
 a |     b     |        c         
---+-----------+------------------
 t | foobarbaz | a shorter than b
(1 row)

test=> SELECT a, b, c FROM test_ret('foobar','bar') AS (a BOOL, b TEXT, c TEXT);
 a |     b     | c 
---+-----------+---
 f | barfoobar | 
(1 row)

This is one of the coolest and most underused features in PostgreSQL. Please spread the word.

Verify your code with JSLint. It will usually find a ton of small errors, so the warning "JSLint may hurt your feelings" is pretty spot on. =)

Simple Internet Explorer 7 and below shim that preserves line numbering for other browsers:

/* Console shim */
(function () {
    var f = function () {};
    if (!window.console) {
        window.console = {
            log:f, info:f, warn:f, debug:f, error:f
        };
    }
}());

If You want make json object from yor model do like this :

  foreach (var item in Persons)
   {
    var jsonObj=["FirstName":"@item.FirstName"]
   }

Or Use Json.Net to make json from your model :

string json = JsonConvert.SerializeObject(person);

Overall just add display:block; to your span. You can leave your html unchanged.

Demo

You can do it with the following css:

p {
    font-size:24px; 
    font-weight: 300; 
    -webkit-font-smoothing: subpixel-antialiased; 
    margin-top:0px;
}

p span {
    font-size:16px; 
    font-style: italic; 
    margin-top:20px; 
    padding-left:10px; 
    display:inline-block;
}

Swift 2.0

// Checking if app is running iOS 8
    if application.respondsToSelector("isRegisteredForRemoteNotifications") {

        print("registerApplicationForPushNotifications - iOS 8")

        application.registerUserNotificationSettings(UIUserNotificationSettings(forTypes: [.Alert, .Badge, .Sound], categories: nil));
        application.registerForRemoteNotifications()

    } else {
        // Register for Push Notifications before iOS 8
        print("registerApplicationForPushNotifications - <iOS 8")
        application.registerForRemoteNotificationTypes([UIRemoteNotificationType.Alert, UIRemoteNotificationType.Badge, UIRemoteNotificationType.Sound])

    }

I've heard in my degree classes that a HashTable will place a new entry into the 'next available' bucket if the new Key entry collides with another.

This is actually not true, at least for the Oracle JDK (it is an implementation detail that could vary between different implementations of the API). Instead, each bucket contains a linked list of entries prior to Java 8, and a balanced tree in Java 8 or above.

then how would the HashTable still return the correct Value if this collision occurs when calling for one back with the collision key?

It uses the equals() to find the actually matching entry.

If I implement my own hashing function and use it as part of a look-up table (i.e. a HashMap or Dictionary), what strategies exist for dealing with collisions?

There are various collision handling strategies with different advantages and disadvantages. Wikipedia's entry on hash tables gives a good overview.

QueueHandler is native in Python 3.2+, and does exactly this. It is easily replicated in previous versions.

Python docs have two complete examples: Logging to a single file from multiple processes

For those using Python < 3.2, just copy QueueHandler into your own code from: https://gist.github.com/vsajip/591589 or alternatively import logutils.

Each process (including the parent process) puts its logging on the Queue, and then a listener thread or process (one example is provided for each) picks those up and writes them all to a file - no risk of corruption or garbling.

Had the same issue and just figured, website is running under MAMP's php, but when you call in command, it runs mac's(if no bash path modified). you will have issue when mac doesn't have those extensions.

run php -i to find out loaded extensions, and install those one you missed. or run '/Applications/MAMP/bin/php/php5.3.6/bin/php artisan {your command}' to use MAMP's

When I tried to create something simillar to inbox floating action button i thought about creating own custom component.

It would be simple frame layout with fixed height (to contain expanded menu) containing FAB button and 3 more placed under the FAB. when you click on FAB you just simply animate other buttons to translate up from under the FAB.

There are some libraries which do that (for example https://github.com/futuresimple/android-floating-action-button), but it's always more fun if you create it by yourself :)

clean is its own build lifecycle phase (which can be thought of as an action or task) in Maven. mvn clean install tells Maven to do the clean phase in each module before running the install phase for each module.

What this does is clear any compiled files you have, making sure that you're really compiling each module from scratch.

It happens when you don't properly close the code block:

if (condition){
  // your code goes here*
  { // This doesn't close the code block

Correct way:

if (condition){
  // your code goes here
} // Close the code block

The body onLoad could be an alternative too:

<html>
<head><title>Body onLoad Exmaple</title>

<script type="text/javascript">
    function window_onload() {
        //do something
    }
</script>

</head>
<body onLoad="window_onload()">

</body>
</html>

Be carefully though. If you return Collections.emptyList() and then try to do some changes with it like add() or smth like that, u will have an UnsupportedOperationException() because Collections.emptyList() returns an immutable object.

Just an idea: Use Python as embeddable scripting language to plot your graphs. Python has a plethora of plotting libraries.

I would NEVER use chars. I’ve had this debate with many people and they always bring up the tired cliché that char is faster. Well I say, how much faster? What are we talking about here, milliseconds, seconds and if so how many? You’re telling me because someone claims its a few milliseconds faster, we should introduce tons of hard to fix bugs into the system?

So here are some issues you will run into:

Every field will be padded, so you end up with code forever that has RTRIMS everywhere. This is also a huge disk space waste for the longer fields.

Now let’s say you have the quintessential example of a char field of just one character but the field is optional. If somebody passes an empty string to that field it becomes one space. So when another application/process queries it, they get one single space, if they don’t use rtrim. We’ve had xml documents, files and other programs, display just one space, in optional fields and break things.

So now you have to ensure that you’re passing nulls and not empty string, to the char field. But that’s NOT the correct use of null. Here is the use of null. Lets say you get a file from a vendor

Name|Gender|City

Bob||Los Angeles

If gender is not specified than you enter Bob, empty string and Los Angeles into the table. Now lets say you get the file and its format changes and gender is no longer included but was in the past.

Name|City

Bob|Seattle

Well now since gender is not included, I would use null. Varchars support this without issues.

Char on the other hand is different. You always have to send null. If you ever send empty string, you will end up with a field that has spaces in it.

I could go on and on with all the bugs I’ve had to fix from chars and in about 20 years of development.

In my case problem was at context.xml file of my project.

The following from context.xml causes the java.lang.AbstractMethodError, since we didn't show the datasource factory.

<Resource name="jdbc/myoracle"
              auth="Container"
              type="javax.sql.DataSource"
              driverClassName="oracle.jdbc.OracleDriver"
              url="jdbc:oracle:thin:@(DESCRIPTION = ... "
              username="****" password="****" maxActive="10" maxIdle="1"
              maxWait="-1" removeAbandoned="true"/> 

Simpy adding factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" solved the issue:

<Resource name="jdbc/myoracle"
              auth="Container"
              factory="org.apache.tomcat.jdbc.pool.DataSourceFactory"  type="javax.sql.DataSource"
              driverClassName="oracle.jdbc.OracleDriver"
              url="jdbc:oracle:thin:@(DESCRIPTION = ... "
              username="****" password="****" maxActive="10" maxIdle="1"
              maxWait="-1" removeAbandoned="true"/>

To make sure I reproduced the issue several times by removing factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" from Resource

I got here with an MS Access problem.

Backticks are good for MySQL, but they create weird errors, like "Invalid Query Name: Query1" in MS Access, for MS Access only, use square brackets:

It should look like this

SELECT Customer.[Customer ID], Customer.[Full Name] ...

table { width: 100%; }

Will not produce the exact result you are expecting, because of all the margins and paddings used in body. So IF scripts are OKAY, then use Jquery.

$("#tableid").width($(window).width());

If not, use this snippet

<style>
    body { margin:0;padding:0; }
</style>
<table width="100%" border="1">
    <tr>
        <td>Just a Test
        </td>
    </tr>
</table>

You will notice that the width is perfectly covering the page.

The main thing is too nullify the margin and padding as I have shown at the body, then you are set.

Complete checking of a string for null conditions can be a s follows :<\br>

    if(mystring)
     {
       if([mystring isEqualToString:@""])
        {
          mystring=@"some string";
        }
     }    
    else
     {
        //statements
     }

In Mongoose, a sort can be done in any of the following ways:

    Post.find({}).sort('test').exec(function(err, docs) { ... });
    Post.find({}).sort([['date', -1]]).exec(function(err, docs) { ... });
    Post.find({}).sort({test: 1}).exec(function(err, docs) { ... });
    Post.find({}, null, {sort: {date: 1}}, function(err, docs) { ... });

A SELECT INTO statement creates the table for you. There is no need for the CREATE TABLE statement before hand.

What is happening is that you create #ivmy_cash_temp1 in your CREATE statement, then the DB tries to create it for you when you do a SELECT INTO. This causes an error as it is trying to create a table that you have already created.

Either eliminate the CREATE TABLE statement or alter your query that fills it to use INSERT INTO SELECT format.

If you need a unique ID added to your new row then it's best to use SELECT INTO... since IDENTITY() only works with this syntax.

You don't have to call the external basename command. Instead, you could use the following commands:

$ s=/the/path/foo.txt
$ echo "${s##*/}"
foo.txt
$ s=${s##*/}
$ echo "${s%.txt}"
foo
$ echo "${s%.*}"
foo

Note that this solution should work in all recent (post 2004) POSIX compliant shells, (e.g. bash, dash, ksh, etc.).

Source: Shell Command Language 2.6.2 Parameter Expansion

More on bash String Manipulations: http://tldp.org/LDP/LG/issue18/bash.html

In my case, it was the UIAlertView on iPad: UIAlertController is Crashed (iPad). I didn't setup sourceView and sourceRect.

First of all to see how many revisions you are behind locally, you should do a git fetch to make sure you have the latest info from your remote.

The default output of git status tells you how many revisions you are ahead or behind, but usually I find this too verbose:

$ git status
# On branch master
# Your branch and 'origin/master' have diverged,
# and have 2 and 1 different commit each, respectively.
#
nothing to commit (working directory clean)

I prefer git status -sb:

$ git status -sb
## master...origin/master [ahead 2, behind 1]

In fact I alias this to simply git s, and this is the main command I use for checking status.

To see the diff in the "ahead revisions" of master, I can exclude the "behind revisions" from origin/master:

git diff master..origin/master^

To see the diff in the "behind revisions" of origin/master, I can exclude the "ahead revisions" from master:

git diff origin/master..master^^

If there are 5 revisions ahead or behind it might be easier to write like this:

git diff master..origin/master~5
git diff origin/master..master~5

UPDATE

To see the ahead/behind revisions, the branch must be configured to track another branch. For me this is the default behavior when I clone a remote repository, and after I push a branch with git push -u remotename branchname. My version is 1.8.4.3, but it's been working like this as long as I remember.

As of version 1.8, you can set the tracking branch like this:

git branch --track test-branch

As of version 1.7, the syntax was different:

git branch --set-upstream test-branch

Disclaimer : I've created fast-xml-parser

I have created fast-xml-parser to parse a XML string into JS/JSON object or intermediate traversal object. It is expected to be compatible in all the browsers (however tested on Chrome, Firefox, and IE only).

Usage

var options = { //default
    attrPrefix : "@_",
    attrNodeName: false,
    textNodeName : "#text",
    ignoreNonTextNodeAttr : true,
    ignoreTextNodeAttr : true,
    ignoreNameSpace : true,
    ignoreRootElement : false,
    textNodeConversion : true,
    textAttrConversion : false,
    arrayMode : false
};

if(parser.validate(xmlData)){//optional
    var jsonObj = parser.parse(xmlData, options);
}

//Intermediate obj
var tObj = parser.getTraversalObj(xmlData,options);
:
var jsonObj = parser.convertToJson(tObj);

Note: It doesn't use DOM parser but parse the string using RE and convert it into JS/JSON object.

Try it online, CDN

This is the simplest way I can come with.

package main

import "fmt"

func main() {
    g := greeting
    getFunc(g)
}

func getFunc(f func()) {
    f()
}

func greeting() {
    fmt.Println("Hello")
}

You pass the exception directly to the logger, e.g.

try {
   ...
} catch (Exception e) {
    log.error( "failed!", e );
}

It's up to log4j to render the stack trace.

The method, as indicated by their technical considerations page, is correct - so you're definitely not doing anything wrong. However, this bug report on Google Code indicate that there is a problem with the fonts Google produced for this, specifically the IE version. This only seems to affect only some fonts, but it's a real bummmer.

The answers on the thread indicate that the problem lies with the files Google's serving up, so there's nothing you can do about it. The author suggest getting the fonts from alternative locations, like FontSquirrel, and serving it locally instead, in which case you might also be interested in sites like the League of Movable Type.

N.B. As of Oct 2010 the issue is reported as fixed and closed on the Google Code bug report.

How to hard reset Visual Studio instance

When developing extensions sometimes you just mess up, others someone else does. If you start getting errors loading even the most mundane extensions, these are the instructions to hard reset your instance.

Close Visual Studio (if you haven’t already).
Open the registry editor (regedit.exe)
Delete the HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\{version}
Delete the HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\{version}_Config
Delete the %LOCALAPPDATA%\Microsoft\VisualStudio\{version} directory.

Enjoy your brand new Visual Studio instance.

• Use {version}=10.0 for Visual Studio 2010
• Use {version}=11.0 for Visual Studio 2012
• Use {version}=12.0 for Visual Studio 2013

If on the other side you want to reset the experimental hive you can do the same to with the ‘{version}Exp’ ones.

Happy coding!

Source: http://www.corvalius.com/site/hacks/how-to-hard-reset-visual-studio-instance/

There is nothing a Factory cannot do or does better in comparison with a Service. And vice verse. Factory just seems to be more popular. The reason for that is its convenience in handling private/public members. Service would be more clumsy in this regard. When coding a Service you tend to make your object members public via “this” keyword and may suddenly find out that those public members are not visible to private methods (ie inner functions).

var Service = function(){

  //public
  this.age = 13;

  //private
  function getAge(){

    return this.age; //private does not see public

  }

  console.log("age: " + getAge());

};

var s = new Service(); //prints 'age: undefined'

Angular uses the “new” keyword to create a service for you, so the instance Angular passes to the controller will have the same drawback. Of course you may overcome the problem by using this/that:

var Service = function(){

  var that = this;

  //public
  this.age = 13;

  //private
  function getAge(){

    return that.age;

  }

  console.log("age: " + getAge());

};

var s = new Service();// prints 'age: 13'  

But with a large Service constant this\that-ing would make the code poorly readable. Moreover, the Service prototypes will not see private members – only public will be available to them:

var Service = function(){

  var name = "George";

};

Service.prototype.getName = function(){

  return this.name; //will not see a private member

};

var s = new Service();
console.log("name: " + s.getName());//prints 'name: undefined'

Summing it up, using Factory is more convenient. As Factory does not have these drawbacks. I would recommend using it by default.

If you want to retrieve the key's value if it exists, you can also use

try:
    value = a[key]
except KeyError:
    # Key is not present
    pass

If you want to retrieve a default value when the key does not exist, use value = a.get(key, default_value). If you want to set the default value at the same time in case the key does not exist, use value = a.setdefault(key, default_value).

For completeness, we should include ConfigParser and configparser which are part of the standard library in Python 2 and 3, respectively. This module reads and writes to a config/ini file and (at least in Python 3) behaves in a lot of ways like a dictionary. It has the added benefit that you can store multiple dictionaries into separate sections of your config/ini file and recall them. Sweet!

Python 2.7.x example.

import ConfigParser

config = ConfigParser.ConfigParser()

dict1 = {'key1':'keyinfo', 'key2':'keyinfo2'}
dict2 = {'k1':'hot', 'k2':'cross', 'k3':'buns'}
dict3 = {'x':1, 'y':2, 'z':3}

# Make each dictionary a separate section in the configuration
config.add_section('dict1')
for key in dict1.keys():
    config.set('dict1', key, dict1[key])
   
config.add_section('dict2')
for key in dict2.keys():
    config.set('dict2', key, dict2[key])

config.add_section('dict3')
for key in dict3.keys():
    config.set('dict3', key, dict3[key])

# Save the configuration to a file
f = open('config.ini', 'w')
config.write(f)
f.close()

# Read the configuration from a file
config2 = ConfigParser.ConfigParser()
config2.read('config.ini')

dictA = {}
for item in config2.items('dict1'):
    dictA[item[0]] = item[1]

dictB = {}
for item in config2.items('dict2'):
    dictB[item[0]] = item[1]

dictC = {}
for item in config2.items('dict3'):
    dictC[item[0]] = item[1]

print(dictA)
print(dictB)
print(dictC)

Python 3.X example.

import configparser

config = configparser.ConfigParser()

dict1 = {'key1':'keyinfo', 'key2':'keyinfo2'}
dict2 = {'k1':'hot', 'k2':'cross', 'k3':'buns'}
dict3 = {'x':1, 'y':2, 'z':3}

# Make each dictionary a separate section in the configuration
config['dict1'] = dict1
config['dict2'] = dict2
config['dict3'] = dict3

# Save the configuration to a file
f = open('config.ini', 'w')
config.write(f)
f.close()

# Read the configuration from a file
config2 = configparser.ConfigParser()
config2.read('config.ini')

# ConfigParser objects are a lot like dictionaries, but if you really
# want a dictionary you can ask it to convert a section to a dictionary
dictA = dict(config2['dict1'] )
dictB = dict(config2['dict2'] )
dictC = dict(config2['dict3'])

print(dictA)
print(dictB)
print(dictC)

Console output

{'key2': 'keyinfo2', 'key1': 'keyinfo'}
{'k1': 'hot', 'k2': 'cross', 'k3': 'buns'}
{'z': '3', 'y': '2', 'x': '1'}

Contents of config.ini

[dict1]
key2 = keyinfo2
key1 = keyinfo

[dict2]
k1 = hot
k2 = cross
k3 = buns

[dict3]
z = 3
y = 2
x = 1

Below code is work well in my project Swift5. try load url by WKWebView below:

    private func loadURL(urlString: String) {
        let url = URL(string: urlString)
        guard let urlToLoad = url else { fatalError("Cannot find any URL") }

        // Cookies configuration
        var urlRequest = URLRequest(url: urlToLoad)
        if let cookies = HTTPCookieStorage.shared.cookies(for: urlToLoad) {
            let headers = HTTPCookie.requestHeaderFields(with: cookies)
            for header in headers { urlRequest.addValue(header.value, forHTTPHeaderField: header.key) }
        }

        webview.load(urlRequest)
    }

I'm also faced this situation. You can handle above method. but simple if you pass simple_dropdown_item_1line as resource. It will be black color text by default.

This is my code I have achieved in kind of situation.

ArrayAdapter<String> arrAdapter = 
new ArrayAdapter<String>(context,android.R.layout.simple_dropdown_item_1line,countryList);
        listView.setAdapter(arrAdapter);

Your code below:

setListAdapter(new ArrayAdapter<String>(getApplicationContext(),
                android.R.layout.simple_dropdown_item_1line, mStringList));

Actually android.R.layout.simple_dropdown_item_1line is used for dropdown. I urge u to see this layout content once. It just simple textview. thats all. It's property will not affect your task. I checked It works fine.

Is that your actual code? A javascript object (which is what you've given us) does not have a length property, so in this case exampleArray.length returns undefined rather than 5.

This stackoverflow explains the length differences between an object and an array, and this stackoverflow shows how to get the 'size' of an object.

Array.prototype.find is not supported in any version of IE

https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/find

Now I'm using this:

Dialoglar.Confirm = function (_title, _question, callback_OK) {
    var confirmArguments = arguments;
    bootbox.dialog({
        title: "<b>" + _title + "</b>",
        message: _question,
        buttons: {
            success: {
                label: "OK",
                className: "btn-success",
                callback: function () {
                    if (typeof(callback_OK) == "function") {                            callback_OK.apply(this,Array.prototype.slice.call(confirmArguments, 3));
                    }
                }
            },
            danger: {
                label: "Cancel",
                className: "btn-danger",
                callback: function () {
                    $(this).hide();
                }
            }
        }
    });
};

' i modify the code for Datatable 

For Each c as DataColumn in dt.Columns
 For j=0 To _dataTable.Columns.Count-1
            xlWorksheet.Cells (i+1, j+1) = _dataTable.Columns(j).ColumnName
Next
Next

Hope this could be help!

=LEFT(A1,FIND(IF(
 ISERROR(
  FIND("_",A1)
 ),A1,RIGHT(A1,
  LEN(A1)-FIND("~",
   SUBSTITUTE(A1,"_","~",
    LEN(A1)-LEN(SUBSTITUTE(A1,"_",""))
   )
  )
 )
),A1,1)-2)

If any of your markn columns are "AllowNull" then you will need to do a little extra to insure the correct result is returned, this is because 1 NULL value will result in a NULL total.

This is what i would consider to be the correct answer.

SUM(IFNULL(`mark1`, 0) + IFNULL(`mark2`, 0) + IFNULL(`mark3`, 0)) AS `total_marks` 

IFNULL will return the 2nd parameter if the 1st is NULL. COALESCE could be used but i prefer to only use it if it is required. See What is the difference bewteen ifnull and coalesce in mysql?

SUM-ing the entire calculation is tidier than SUM-ing each column individually.

SELECT `student`, SUM(IFNULL(`mark1`, 0) + IFNULL(`mark2`, 0) + IFNULL(`mark3`, 0)) AS `total_marks` 
FROM student_scorecard
GROUP BY `student`

For a PUT request: HTTP 200 or HTTP 204 should imply "resource updated successfully".

For a DELETE request: HTTP 200 or HTTP 204 should imply "resource deleted successfully". HTTP 202 can also be returned which would imply that the instruction was accepted by the server and the "resource was marked for deletion".

PUT

If an existing resource is modified, either the 200 (OK) or 204 (No Content) response codes SHOULD be sent to indicate successful completion of the request.

DELETE

A successful response SHOULD be 200 (OK) if the response includes an entity describing the status, 202 (Accepted) if the action has not yet been enacted, or 204 (No Content) if the action has been enacted but the response does not include an entity.

Source: W3.org: HTTP/1.1 Method Definitions

HTTP 200 OK: Standard response for successful HTTP requests. The actual response will depend on the request method used.

HTTP 204 No Content: The server successfully processed the request, but is not returning any content

Source: List of HTTP status codes: 2xx Success

Quick summary, you can do either:

1. Include the JavaFX modules via --module-path and --add-modules like in José's answer.

   OR

2. Once you have JavaFX libraries added to your project (either manually or via maven/gradle import), add the module-info.java file similar to the one specified in this answer. (Note that this solution makes your app modular, so if you use other libraries, you will also need to add statements to require their modules inside the module-info.java file).

This answer is a supplement to Jose's answer.

The situation is this:

1. You are using a recent Java version, e.g. 13.
2. You have a JavaFX application as a Maven project.
3. In your Maven project you have the JavaFX plugin configured and JavaFX dependencies setup as per Jose's answer.
4. You go to the source code of your main class which extends Application, you right-click on it and try to run it.
5. You get an IllegalAccessError involving an "unnamed module" when trying to launch the app.

Excerpt for a stack trace generating an IllegalAccessError when trying to run a JavaFX app from Intellij Idea:

Exception in Application start method
java.lang.reflect.InvocationTargetException
    at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
    at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.base/java.lang.reflect.Method.invoke(Method.java:567)
    at javafx.graphics/com.sun.javafx.application.LauncherImpl.launchApplicationWithArgs(LauncherImpl.java:464)
    at javafx.graphics/com.sun.javafx.application.LauncherImpl.launchApplication(LauncherImpl.java:363)
    at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
    at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.base/java.lang.reflect.Method.invoke(Method.java:567)
    at java.base/sun.launcher.LauncherHelper$FXHelper.main(LauncherHelper.java:1051)
Caused by: java.lang.RuntimeException: Exception in Application start method
    at javafx.graphics/com.sun.javafx.application.LauncherImpl.launchApplication1(LauncherImpl.java:900)
    at javafx.graphics/com.sun.javafx.application.LauncherImpl.lambda$launchApplication$2(LauncherImpl.java:195)
    at java.base/java.lang.Thread.run(Thread.java:830)
Caused by: java.lang.IllegalAccessError: class com.sun.javafx.fxml.FXMLLoaderHelper (in unnamed module @0x45069d0e) cannot access class com.sun.javafx.util.Utils (in module javafx.graphics) because module javafx.graphics does not export com.sun.javafx.util to unnamed module @0x45069d0e
    at com.sun.javafx.fxml.FXMLLoaderHelper.<clinit>(FXMLLoaderHelper.java:38)
    at javafx.fxml.FXMLLoader.<clinit>(FXMLLoader.java:2056)
    at org.jewelsea.demo.javafx.springboot.Main.start(Main.java:13)
    at javafx.graphics/com.sun.javafx.application.LauncherImpl.lambda$launchApplication1$9(LauncherImpl.java:846)
    at javafx.graphics/com.sun.javafx.application.PlatformImpl.lambda$runAndWait$12(PlatformImpl.java:455)
    at javafx.graphics/com.sun.javafx.application.PlatformImpl.lambda$runLater$10(PlatformImpl.java:428)
    at java.base/java.security.AccessController.doPrivileged(AccessController.java:391)
    at javafx.graphics/com.sun.javafx.application.PlatformImpl.lambda$runLater$11(PlatformImpl.java:427)
    at javafx.graphics/com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:96)
Exception running application org.jewelsea.demo.javafx.springboot.Main

OK, now you are kind of stuck and have no clue what is going on.

What has actually happened is this:

1. Maven has successfully downloaded the JavaFX dependencies for your application, so you don't need to separately download the dependencies or install a JavaFX SDK or module distribution or anything like that.
2. Idea has successfully imported the modules as dependencies to your project, so everything compiles OK and all of the code completion and everything works fine.

So it seems everything should be OK. BUT, when you run your application, the code in the JavaFX modules is failing when trying to use reflection to instantiate instances of your application class (when you invoke launch) and your FXML controller classes (when you load FXML). Without some help, this use of reflection can fail in some cases, generating the obscure IllegalAccessError. This is due to a Java module system security feature which does not allow code from other modules to use reflection on your classes unless you explicitly allow it (and the JavaFX application launcher and FXMLLoader both require reflection in their current implementation in order for them to function correctly).

This is where some of the other answers to this question, which reference module-info.java, come into the picture.

So let's take a crash course in Java modules:

• https://www.baeldung.com/java-9-modularity

The key part is this:

4.9. Opens

If we need to allow reflection of private types, but we don't want all of our code exposed, we can use the opens directive to expose specific packages.

But remember, this will open the package up to the entire world, so make sure that is what you want:

module my.module { opens com.my.package; }

So, perhaps you don't want to open your package to the entire world, then you can do:

4.10. Opens … To

Okay, so reflection is great sometimes, but we still want as much security as we can get from encapsulation. We can selectively open our packages to a pre-approved list of modules, in this case, using the opens…to directive:

module my.module { opens com.my.package to moduleOne, moduleTwo, etc.; }

So, you end up creating a src/main/java/module-info.java class which looks like this:

module org.jewelsea.demo.javafx.springboot {
    requires javafx.fxml;
    requires javafx.controls;
    requires javafx.graphics;
    opens org.jewelsea.demo.javafx.springboot to javafx.graphics,javafx.fxml;
}

Where, org.jewelsea.demo.javafx.springboot is the name of the package which contains the JavaFX Application class and JavaFX Controller classes (replace this with the appropriate package name for your application). This tells the Java runtime that it is OK for classes in the javafx.graphics and javafx.fxml to invoke reflection on the classes in your org.jewelsea.demo.javafx.springboot package. Once this is done, and the application is compiled and re-run things will work fine and the IllegalAccessError generated by JavaFX's use of reflection will no longer occur.

But what if you don't want to create a module-info.java file

If instead of using the the Run button in the top toolbar of IDE to run your application class directly, you instead:

1. Went to the Maven window in the side of the IDE.
2. Chose the javafx maven plugin target javafx.run.
3. Right-clicked on that and chose either Run Maven Build or Debug....

Then the app will run without the module-info.java file. I guess this is because the maven plugin is smart enough to dynamically include some kind of settings which allows the app to be reflected on by the JavaFX classes even without a module-info.java file, though I don't know how this is accomplished.

To get that setting transferred to the Run button in the top toolbar, right-click on the javafx.run Maven target and choose the option to Create Run/Debug Configuration for the target. Then you can just choose Run from the top toolbar to execute the Maven target.

DELETE FROM blob
WHERE NOT EXISTS (
    SELECT *
    FROM files
    WHERE id=blob.id
)

If someone came here with the problem of docker php official images, type below command inside the docker container.

$ docker-php-ext-install mysql mysqli pdo pdo_mysql

For more information, please refer to the link above How to install more PHP extensions section(But it's a bit difficult for me...).

Or this doc may help you.

https://docs.docker.com/samples/library/php/

It's hard to answer you without the HTML, but in general you can put:

style="width: 50%;"

On either the table cell, or place a div inside the table cell, and put the style on that.

But one problem is "50% of what?" It's 50% of the parent element which may not be what you want.

Post a copy of your HTML and maybe you'll get a better answer.

No, there isn't. The designers of Java are on record as saying they didn't like unsigned ints. Use a BigInteger instead. See this question for details.

Did you check the small Mousetrap library?

Mousetrap is a simple library for handling keyboard shortcuts in JavaScript.

Try any of these

valof = moment().valueOf();            // xxxxxxxxxxxxx
getTime = moment().toDate().getTime(); // xxxxxxxxxxxxx
unixTime =  moment().unix();           // xxxxxxxxxx
formatTimex =  moment().format('x');   // xxxxxxxxxx
unixFormatX = moment().format('X');    // xxxxxxxxxx

You could use pandas plot as @Bharath suggest:

import seaborn as sns
sns.set()
df.set_index('App').T.plot(kind='bar', stacked=True)

Output:

Updated:

from matplotlib.colors import ListedColormap df.set_index('App')\ .reindex_axis(df.set_index('App').sum().sort_values().index, axis=1)\ .T.plot(kind='bar', stacked=True, colormap=ListedColormap(sns.color_palette("GnBu", 10)), figsize=(12,6))

Updated Pandas 0.21.0+ reindex_axis is deprecated, use reindex

from matplotlib.colors import ListedColormap

df.set_index('App')\
  .reindex(df.set_index('App').sum().sort_values().index, axis=1)\
  .T.plot(kind='bar', stacked=True,
          colormap=ListedColormap(sns.color_palette("GnBu", 10)), 
          figsize=(12,6))

Output:

In short answer in pure Javascript is:

<script type="text/javascript">
    window.addEventListener('keydown', function(e) {
        if (e.keyIdentifier == 'U+000A' || e.keyIdentifier == 'Enter' || e.keyCode == 13) {
            if (e.target.nodeName == 'INPUT' && e.target.type == 'text') {
                e.preventDefault();
                return false;
            }
        }
    }, true);
</script>

This only disables the "Enter" keypress action for input type='text'. Visitors can still use "Enter" key all over the website.

If you want to disable "Enter" for other actions as well, you can add console.log(e); for your your test purposes, and hit F12 in chrome, go to "console" tab and hit "backspace" on the page and look inside it to see what values are returned, then you can target all of those parameters to further enhance the code above to suit your needs for "e.target.nodeName", "e.target.type" and many more...

See my detailed answer for a similar question here

As others have explained that it is not possible, but here's alternative solution, it requires a little tuning, but it works like datetime column.

I started to think, how I could make formatting possible. I got an idea. What about making trigger for it? I mean, adding column with type char, and then updating that column using a MySQL trigger. And that worked! I made some research related to triggers, and finally come up with these queries:

CREATE TRIGGER timestampper BEFORE INSERT ON table
FOR EACH
ROW SET NEW.timestamp = DATE_FORMAT(NOW(), '%d-%m-%Y %H:%i:%s');

CREATE TRIGGER timestampper BEFORE UPDATE ON table
FOR EACH
ROW SET NEW.timestamp = DATE_FORMAT(NOW(), '%d-%m-%Y %H:%i:%s');

You can't use TIMESTAMP or DATETIME as a column type, because these have their own format, and they update automatically.

So, here's your alternative timestamp or datetime alternative! Hope this helped, at least I'm glad that I got this working.

very simple

$('#label-ID').text("label value which you want to set");

It's a bit late, But easy and effective. Click on About Android Studio, Check the current version, Open build.graddle of Project and put it in front of the class path. e.g Your studio version is 3.5.2, then your classpath should be like that.

classpath 'com.android.tools.build:gradle:3.5.2'

Using Maria-DB and DB-Navigator tool inside IntelliJ, MODIFY Column worked for me instead of Alter Column

Now all clients allow to do it, but it's not pretty simple.
In any Telegram client:

1. Open Channel info (in app title)
2. Choose Administrators
3. Add Administrator
4. There will be no bots in contact list, so you need to search for it. Enter your bot's username
5. Clicking on it you make it as administrator.

This related question points out a part of the ?read.table documentation that explains your problem:

If there is a header and the first row contains one fewer field than the number of columns, the first column in the input is used for the row names. Otherwise if row.names is missing, the rows are numbered.

Your header row likely has 1 fewer column than the rest of the file and so read.table assumes that the first column is the row.names (which must all be unique), not a column (which can contain duplicated values). You can fix this by using one of the following two Solutions:

1. adding a delimiter (ie \t or ,) to the front or end of your header row in the source file, or,
2. removing any trailing delimiters in your data

The choice will depend on the structure of your data.

Example:
Here the header row is interpreted as having one fewer column than the data because the delimiters don't match:

v1,v2,v3   # 3 items!!
a1,a2,a3,  # 4 items
b1,b2,b3,  # 4 items

This is how it is interpreted by default:

   v1,v2,v3   # 3 items!!
a1,a2,a3,  # 4 items
b1,b2,b3,  # 4 items

The first column (with no header) values are interpreted as row.names: a1 and b1. If this column contains duplicates, which is entirely possible, then you get the duplicate 'row.names' are not allowed error.

If you set row.names = FALSE, the shift doesn't happen, but you still have a mismatching number of items in the header and in the data because the delimiters don't match.

Solution 1 Add trailing delimiter to header:

v1,v2,v3,  # 4 items!!
a1,a2,a3,  # 4 items
b1,b2,b3,  # 4 items

Solution 2 Remove excess trailing delimiter from non-header rows:

v1,v2,v3   # 3 items
a1,a2,a3   # 3 items!!
b1,b2,b3   # 3 items!!

When generating the key, don't forget to concatenate the version and build number to the string you calculate the hash on. That way there won't be a single key that unlocks all everything you ever released.

After you find some keys or patches floating in astalavista.box.sk you'll know that you succeeded in making something popular enough that somebody bothered to crack. Rejoice!

I think this above code will work on LongClicking the listview, not the individual items.

why not use registerForContextMenu(listView). and then get the callback in OnCreateContextMenu.

For most use cases this will work same.

Are you using the default controls boolean attribute on the video tag? If so, I believe all the supporting browsers have mute buttons. If you need to wire it up, set .muted to true on the element in javascript (use .prop for jquery because it's an IDL attribute.) The speaker icon on the volume control is the mute button on chrome,ff, safari, and opera for example

I simply write it this way

in the AspectType file:

class AspectType {
  //blah blah
}
module.exports = AspectType;

and import it like this:

const AspectType = require('./AspectType');
var aspectType = new AspectType;

@beanland; You have to write

-webkit-appearance:none;

in your css.

read this http://trentwalton.com/2010/07/14/css-webkit-appearance/

Assume we have a function sort(int *arraytobesorted,void (*algorithmchosen)(void)) where it can accept a function pointer as its argument which can be used at some point in sort()'s implementation . Then , here the code that is being addressed by the function pointer algorithmchosen is called as callback function .

And see the advantage is that we can choose any algorithm like:

  1.    algorithmchosen = bubblesort
  2.    algorithmchosen = heapsort
  3.    algorithmchosen = mergesort   ...

Which were, say,have been implemented with the prototype:

  1.   `void bubblesort(void)`
  2.   `void heapsort(void)`
  3.   `void mergesort(void)`   ...

This is a concept used in achieving Polymorphism in Object Oriented Programming

Here is a simple solution from the source of facebook's slingshot

var isMobile = /iPhone|iPad|iPod|Android/i.test(navigator.userAgent);
if (isMobile) {
  /* your code here */
}

Try this

$('body').on('change', '#multiid', function() {
    // your stuff
})

please check .on() selector

Just came across the same problem and the null-coalescing operator with SelectSingleNode worked a treat, assigning null with string.Empty

 foreach (XmlNode txElement in txElements)
 {
     var txStatus = txElement.SelectSingleNode(".//ns:TxSts", nsmgr).InnerText ?? string.Empty;
     var endToEndId = txElement.SelectSingleNode(".//ns:OrgnlEndToEndId", nsmgr).InnerText ?? string.Empty;
     var paymentAmount = txElement.SelectSingleNode(".//ns:InstdAmt", nsmgr).InnerText ?? string.Empty;
     var paymentAmountCcy = txElement.SelectSingleNode(".//ns:InstdAmt", nsmgr).Attributes["Ccy"].Value ?? string.Empty;
     var clientId = txElement.SelectSingleNode(".//ns:OrgnlEndToEndId", nsmgr).InnerText ?? string.Empty;
     var bankSortCode = txElement.SelectSingleNode(".//ns:OrgnlEndToEndId", nsmgr).InnerText ?? string.Empty; 

     //TODO finish Object creation and Upsert DB
  }