Programs & Examples On #Application onerror

This one covers all possibilities! (dot in the path or not; with extension or no extension):

tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*});echo $filename_noextension

Notes:

• It gives you the filename without any extension. So there is no path in the $filename_noextension variable.
• You end up with two unwanted variables $tmp1 and $tmp2. Make sure you are not using them in your script.

examples to test:

filename=.bashrc; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=.bashrc.txt; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=.bashrc.txt.tar; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=~/.bashrc; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=~/.bashrc.txt.tar; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=bashrc; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=bashrc.txt; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=bashrc.txt.tar; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=~/bashrc; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

filename=~/bashrc.txt.tar; echo "filename: $filename"; tmp1=${filename##*/};tmp2=${tmp1:1};filename_noextension=$(echo -n ${tmp1:0:1};echo ${tmp2%.*}); echo "filename without extension: $filename_noextension"

Redis use goto to simulate try/catch, IMHO it is very clean and elegant:

/* Save the DB on disk. Return REDIS_ERR on error, REDIS_OK on success. */
int rdbSave(char *filename) {
    char tmpfile[256];
    FILE *fp;
    rio rdb;
    int error = 0;

    snprintf(tmpfile,256,"temp-%d.rdb", (int) getpid());
    fp = fopen(tmpfile,"w");
    if (!fp) {
        redisLog(REDIS_WARNING, "Failed opening .rdb for saving: %s",
            strerror(errno));
        return REDIS_ERR;
    }

    rioInitWithFile(&rdb,fp);
    if (rdbSaveRio(&rdb,&error) == REDIS_ERR) {
        errno = error;
        goto werr;
    }

    /* Make sure data will not remain on the OS's output buffers */
    if (fflush(fp) == EOF) goto werr;
    if (fsync(fileno(fp)) == -1) goto werr;
    if (fclose(fp) == EOF) goto werr;

    /* Use RENAME to make sure the DB file is changed atomically only
     * if the generate DB file is ok. */
    if (rename(tmpfile,filename) == -1) {
        redisLog(REDIS_WARNING,"Error moving temp DB file on the final destination: %s", strerror(errno));
        unlink(tmpfile);
        return REDIS_ERR;
    }
    redisLog(REDIS_NOTICE,"DB saved on disk");
    server.dirty = 0;
    server.lastsave = time(NULL);
    server.lastbgsave_status = REDIS_OK;
    return REDIS_OK;

werr:
    fclose(fp);
    unlink(tmpfile);
    redisLog(REDIS_WARNING,"Write error saving DB on disk: %s", strerror(errno));
    return REDIS_ERR;
}

~dp0 : d=drive, p=path, %0=full path\name of this batch-file.

cd /d %~dp0 will change the path to the same, where the batch file resides.

See for /? or call / for more details about the %~... modifiers.
See cd /? about the /d switch.

For those in the future looking for a simple way to do this in Razor pages, use the following:

In .cshtml:

@Html.Raw(Html.Encode("<span>blah<span>"))

In .cshtml.cs:

string rawHtml = Html.Raw(Html.Encode("<span>blah<span>"));

Creation time isn't stored.

What are stored are three timestamps (generally, they can be turned off on certain filesystems or by certain filesystem options):

• Last access time
• Last modification time
• Last change time

a "Change" to the file is counted as permission changes, rename etc. While the modification is contents only.

It's quite unpractical to make multiple select with size 1. think about it. I made a fiddle here: https://jsfiddle.net/wqd0yd5m/2/

<select name="test" multiple>
    <option>123</option>
    <option>456</option>
    <option>789</option>
</select>

Try to explore other options such as using checkboxes to achieve your goal.

Check your dependencies.

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
  <modelVersion>4.0.0</modelVersion>
  <groupId>SchoolApp</groupId>
  <artifactId>SchoolApp</artifactId>
  <version>0.0.1-SNAPSHOT</version>
  <packaging>war</packaging>

  <properties>
    <hibernate.version>4.2.0.Final</hibernate.version>
    <mysql.connector.version>5.1.21</mysql.connector.version>
    <spring.version>3.2.2.RELEASE</spring.version>
  </properties>

  <dependencies>
    <!-- DB related dependencies -->
    <dependency>
      <groupId>org.hibernate</groupId>
      <artifactId>hibernate-core</artifactId>
      <version>${hibernate.version}</version>
    </dependency>
    <dependency>
      <groupId>org.hibernate</groupId>
      <artifactId>hibernate-entitymanager</artifactId>
      <version>${hibernate.version}</version>
    </dependency>
    <dependency>
      <groupId>mysql</groupId>
      <artifactId>mysql-connector-java</artifactId>
      <version>${mysql.connector.version}</version>
    </dependency>
    <dependency>
      <groupId>commons-dbcp</groupId>
      <artifactId>commons-dbcp</artifactId>
      <version>1.4</version>
    </dependency>
    <dependency>
      <groupId>javassist</groupId>
      <artifactId>javassist</artifactId>
      <version>3.12.1.GA</version>
    </dependency>
    <!-- SPRING -->
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-core</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-web</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-webmvc</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-tx</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-jdbc</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-orm</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <!-- Spring Security  -->
    <dependency>
      <groupId>org.springframework.security</groupId>
      <artifactId>spring-security-core</artifactId>
      <version>3.1.3.RELEASE</version>
    </dependency>
    <dependency>
      <groupId>org.springframework.security</groupId>
      <artifactId>spring-security-web</artifactId>
      <version>3.1.3.RELEASE</version>
    </dependency>
    <dependency>
      <groupId>org.springframework.security</groupId>
      <artifactId>spring-security-config</artifactId>
      <version>3.1.3.RELEASE</version>
    </dependency>
    <dependency>
      <groupId>org.springframework.security</groupId>
      <artifactId>spring-security-taglibs</artifactId>
      <version>3.1.3.RELEASE</version>
    </dependency>
    <!-- CGLIB is required to process @Configuration classes -->
    <dependency>
      <groupId>cglib</groupId>
      <artifactId>cglib</artifactId>
      <version>2.2.2</version>
    </dependency>
    <!-- Servlet API and JSTL -->
    <dependency>
      <groupId>javax.servlet</groupId>
      <artifactId>javax.servlet-api</artifactId>
      <version>3.0.1</version>
      <scope>provided</scope>
    </dependency>
    <dependency>
      <groupId>jstl</groupId>
      <artifactId>jstl</artifactId>
      <version>1.2</version>
    </dependency>
    <!-- Test -->
    <dependency>
      <groupId>junit</groupId>
      <artifactId>junit</artifactId>
      <version>4.7</version>
      <scope>test</scope>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-test</artifactId>
      <version>${spring.version}</version>
      <scope>test</scope>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-test-mvc</artifactId>
      <version>1.0.0.M1</version>
      <scope>test</scope>
    </dependency>
  </dependencies>

  <repositories>
    <repository>
      <id>spring-maven-milestone</id>
      <name>Spring Maven Milestone Repository</name>
      <url>http://maven.springframework.org/milestone</url>
    </repository>
  </repositories>

  <build>
    <finalName>spr-mvc-hib</finalName>
    <plugins>
      <plugin>
        <artifactId>maven-compiler-plugin</artifactId>
        <version>2.3.2</version>
        <configuration>
          <source>1.7</source>
          <target>1.7</target>
        </configuration>
      </plugin>
    </plugins>
  </build>
</project>

I had same application on my localhost and on a shared server. On my localhost the redirects worked fine while on this shared server didn't. I checked the phpinfo and I saw what caused this:

While on my localhost I had this:

So I asked the system admin to increase that value and after he did that, everything worked fine.

You can also use this free plug-and-play extension:

http://www.magentocommerce.com/magento-connect/manage-customer-account-menu.html

This extension does not touch any of the Magento core files.

With this extension you are able to:

1. Decide per menu item to show or hide it with one click in the Magento backend.
2. Rename menu items easily.

Double.TryParse IMO.

It is easier for you to handle, You'll know exactly where the error occurred.

Then you can deal with it how you see fit if it returns false (i.e could not convert).

Have you considered appending to the url a meaningless query string parameter?

<iframe src="myBaseURL.com/something/" />

<script>
var i = document.getElementsById("iframe")[0],
    src = i.src,
    number = 1;

//For an update
i.src = src + "?ignoreMe=" + number;
number++;
</script>

It won't be seen & if you are aware of the parameter being safe then it should be fine.

The full error message sounds:

ERROR 1075 (42000): Incorrect table definition; there can be only one auto column and it must be defined as a key

So add primary key to the auto_increment field:

CREATE TABLE book (
   id INT AUTO_INCREMENT primary key NOT NULL,
   accepted_terms BIT(1) NOT NULL,
   accepted_privacy BIT(1) NOT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1;

Hash-Map stores the (key,value) pair as the Map.Entry Type.As you know that Hash-Map uses Linked Hash-Map(In case Collision occurs). Therefore each Node in the Bucket of Hash-Map is of Type Map.Entry. So whenever you iterate through the Hash-Map you will get Nodes of Type Map.Entry.

Now in your example when you are iterating through the Hash-Map, you will get Map.Entry Type(Which is Interface), To get the Key and Value from this Map.Entry Node Object, interface provided methods like getValue(), getKey() etc. So as per the code, In your Object you are adding all operators JButtons viz (+,-,/,*,=).

Above mentioned answers are correct but what if you are doing a heavy process after losing the focus from the relevant component. For that, I came with a solution with two flags where the focus out event process will only take place when losing the focus from relevant component only.

isFocusInsideComponent = false;
isComponentClicked = false;

@HostListener('click')
clickInside() {
    this.isFocusInsideComponent = true;
    this.isComponentClicked = true;
}

@HostListener('document:click')
clickout() {
    if (!this.isFocusInsideComponent && this.isComponentClicked) {
        // do the heavy process

        this.isComponentClicked = false;
    }
    this.isFocusInsideComponent = false;
}

Hope this will help you. Correct me If have missed anything.

if you want to merge empty array with existing new value. You must initialize it first.

$products = array();
//just example
for($brand_id=1;$brand_id<=3;$brand_id++){
  array_merge($products,getByBrand($brand_id));
}
// it will create empty array
print_r($a);

//check if array of products is empty
for($brand_id=1;$brand_id<=3;$brand_id++){
  if(empty($products)){
    $products = getByBrand($brand_id);
  }else{
    array_merge($products,getByBrand($brand_id));
  }
}
// it will create array of products

Hope its help.

Using Jupyter Notebook, the code can be as simple as the following.

%matplotlib inline
from IPython.display import Image
Image('your_image.png')

Sometimes you might would like to display a series of images in a for loop, in which case you might would like to combine display and Image to make it work.

%matplotlib inline
from IPython.display import display, Image
for your_image in your_images:
    display(Image('your_image'))

You can do this pretty easily using Docker, so no extra libs required. Just run this command:

docker run --rm -it -v "$GOPATH":/go -w /go/src/github.com/iron-io/ironcli golang:1.4.2-cross sh -c '
for GOOS in darwin linux windows; do
  for GOARCH in 386 amd64; do
    echo "Building $GOOS-$GOARCH"
    export GOOS=$GOOS
    export GOARCH=$GOARCH
    go build -o bin/ironcli-$GOOS-$GOARCH
  done
done
'

You can find more details in this post: https://medium.com/iron-io-blog/how-to-cross-compile-go-programs-using-docker-beaa102a316d

After many years of database development I can say there are some no goes and some question that you should answer before you begin:

questions:

• Do you want use in the future another DBMS? If yes then does not use to special SQL stuff of the current DBMS. Remove logic in your application.

Does not use:

• white spaces in table names and column names
• Non Ascii characters in table and column names
• binding to a specific lower case or upper case. And never use 2 tables or columns that differ only with lower case and upper case.
• does not use SQL keywords for tables or columns names like "FROM", "BETWEEN", "DELETE", etc

recomendations:

• Use NVARCHAR or equivalents for unicode support then you have no problems with codepages.
• Give every column a unique name. This make it easer on join to select the column. It is very difficult if every table has a column "ID" or "Name" or "Description". Use XyzID and AbcID.
• Use a resource bundle or equals for complex SQL expressions. It make it easer to switch to another DBMS.
• Does not cast hard on any data type. Another DBMS can not have this data type. FOr example Oracle daes not have a SMALLINT only a number.

I hope this is a good starting point.

In python, not is a boolean operator which gets the opposite of a value:

>>> myval = 0
>>> nyvalue = not myval
>>> nyvalue
True
>>> myval = 1
>>> nyvalue = not myval
>>> nyvalue
False

And True == 1 and False == 0 (if you need to convert it to an integer, you can use int())

Please go to Task Manager and kill the adb.exe process. Restart your eclipse again.

or

try adb kill-server and then adb start-server command.

I have fixed the error.

Follow the steps:

1. Install JDK of 32bt version
2. Install MS-Office 2007

3. Configure Control Panel : a. Control Panel b. Administrator Tools c. Data Source (ODBC)

   right click on it change the target to \sysWOW64\odbcad32.exe change the start in to r%\SysWOW64

Execute it and Best Luck. Works in windows 7 as well as 8

Remove Newer version of MS-Office and install only MS-Office 2007 if problem still persists

The nb_conda_kernels package is the best way to use jupyter with conda. With minimal dependencies and configuration, it allows you to use other conda environments from a jupyter notebook running in a different environment. Quoting its documentation:

Installation

This package is designed to be managed solely using conda. It should be installed in the environment from which you run Jupyter Notebook or JupyterLab. This might be your base conda environment, but it need not be. For instance, if the environment notebook_env contains the notebook package, then you would run

conda install -n notebook_env nb_conda_kernels

Any other environments you wish to access in your notebooks must have an appropriate kernel package installed. For instance, to access a Python environment, it must have the ipykernel package; e.g.

conda install -n python_env ipykernel

To utilize an R environment, it must have the r-irkernel package; e.g.

conda install -n r_env r-irkernel

For other languages, their corresponding kernels must be installed.

Then all you need to do is start the jupyter notebook server:

conda activate notebook_env  # only needed if you are not using the base environment for the server
# conda install jupyter # in case you have not installed it already
jupyter

Despite the plethora of answers and @merv's efforts to improve them, it still hard to find a good one. I made this one CW, so please vote it to the top or improve it!

Using plain javascript

 var isEmpty = document.getElementById('cartContent').innerHTML === "";

And if you are using jquery it can be done like

 var isEmpty = $("#cartContent").html() === "";

In MySQL you could try:

SELECT * FROM A INNER JOIN B ON B.MYCOL LIKE CONCAT('%', A.MYCOL, '%');

Of course this would be a massively inefficient query because it would do a full table scan.

Update: Here's a proof

create table A (MYCOL varchar(255));
create table B (MYCOL varchar(255));
insert into A (MYCOL) values ('foo'), ('bar'), ('baz');
insert into B (MYCOL) values ('fooblah'), ('somethingfooblah'), ('foo');
insert into B (MYCOL) values ('barblah'), ('somethingbarblah'), ('bar');
SELECT * FROM A INNER JOIN B ON B.MYCOL LIKE CONCAT('%', A.MYCOL, '%');
+-------+------------------+
| MYCOL | MYCOL            |
+-------+------------------+
| foo   | fooblah          |
| foo   | somethingfooblah |
| foo   | foo              |
| bar   | barblah          |
| bar   | somethingbarblah |
| bar   | bar              |
+-------+------------------+
6 rows in set (0.38 sec)

def count_substring(string, sub_string):
    counterList=[ 1 for i in range(len(string)-len(sub_string)+1) if string[i:i+len(sub_string)] == sub_string]
    count=sum(counterList)
    return count

if __name__ == '__main__':
    string = input().strip()
    sub_string = input().strip()

    count = count_substring(string, sub_string)
    print(count)

random.uniform(a, b) appears to be what your looking for. From the docs:

Return a random floating point number N such that a <= N <= b for a <= b and b <= N <= a for b < a.

See here.

This is the most common error occurred for most of the developers.

We have number of ways to handle this.

Approach 1:

org.apache.commons.lang.Validate //using apache framework

notNull(Object object, String message)

Approach 2:

if(someObject!=null){ // simply checking against null
}

Approach 3:

@isNull @Nullable  // using annotation based validation

Approach 4:

// by writing static method and calling it across whereever we needed to check the validation

static <T> T isNull(someObject e){  
   if(e == null){
      throw new NullPointerException();
   }
   return e;
}

function setCheckboxValue(checkbox,value) {
    if (checkbox.checked!=value)
        checkbox.click();
}

Some tips:

• Make sure you use vim (vi improved). Linux and some versions of UNIX symlink vi to vim.
• You can get code completion with eclim
• Or you can get vi functionality within Eclipse with viPlugin
• Syntax highlighting is great with vim
• Vim has good support for writing little macros like running ant/maven builds

Have fun :-)

Another solution:

import re

passwordRegex = re.compile(r'''(
    ^(?=.*[A-Z].*[A-Z])                # at least two capital letters
    (?=.*[!@#$&*])                     # at least one of these special c-er
    (?=.*[0-9].*[0-9])                 # at least two numeric digits
    (?=.*[a-z].*[a-z].*[a-z])          # at least three lower case letters
    .{8,}                              # at least 8 total digits
    $
    )''', re.VERBOSE)

def userInputPasswordCheck():
    print('Enter a potential password:')
    while True:
        m = input()
        mo = passwordRegex.search(m) 
        if (not mo):
           print('''
Your password should have at least one special charachter,
two digits, two uppercase and three lowercase charachter. Length: 8+ ch-ers.

Enter another password:''')          
        else:
           print('Password is strong')
           return
userInputPasswordCheck()

That is a default behaviour of each browser; your browser seems to be Safari, in Google Chrome it is orange in color!

Use this to remove this effect:

button {
  outline: none; // this one
}

You need to git add my_project to stage your new folder. Then git add my_project/* to stage its contents. Then commit what you've staged using git commit and finally push your changes back to the source using git push origin master (I'm assuming you wish to push to the master branch).

var youtubeimgsrc = document.getElementById('youtubeimg').src;
document.write(youtubeimgsrc);

Here's a fiddle for you http://jsfiddle.net/cruxst/dvrEN/

The easiest way to use a non-static method/field within a a static method or vice versa is...

(To work this there must be at least one instance of this class)

This type of situation is very common in android app development eg:- An Activity has at-least one instance.

public class ParentClass{

private static ParentClass mParentInstance = null;

ParentClass(){
  mParentInstance = ParentClass.this;           
}


void instanceMethod1(){
}


static void staticMethod1(){        
    mParentInstance.instanceMethod1();
}


public static class InnerClass{
      void  innerClassMethod1(){
          mParentInstance.staticMethod1();
          mParentInstance.instanceMethod1();
      }
   }
}

Note:- This cannot be used as a builder method like this one.....

String.valueOf(100);

Local variables don't have a default value.

They have to be definitely assigned before you use them. It reduces the chance of using a variable you think you've given a sensible value to, when actually it's got some default value.

If you want to make use of nested views functionality implemented within ngRoute paradigm, try angular-route-segment - it aims to extend ngRoute rather than to replace it.

Simple program to write objects to file and read objects from file.

package program;_x000D_
_x000D_
import java.io.File;_x000D_
import java.io.FileInputStream;_x000D_
import java.io.FileOutputStream;_x000D_
import java.io.ObjectInputStream;_x000D_
import java.io.ObjectOutputStream;_x000D_
import java.io.Serializable;_x000D_
_x000D_
public class TempList {_x000D_
_x000D_
  public static void main(String[] args) throws Exception {_x000D_
    Counter counter = new Counter(10);_x000D_
_x000D_
    File f = new File("MyFile.txt");_x000D_
    FileOutputStream fos = new FileOutputStream(f);_x000D_
    ObjectOutputStream oos = new ObjectOutputStream(fos);_x000D_
    oos.writeObject(counter);_x000D_
    oos.close();_x000D_
_x000D_
    FileInputStream fis = new FileInputStream(f);_x000D_
    ObjectInputStream ois = new ObjectInputStream(fis);_x000D_
    Counter newCounter = (Counter) ois.readObject();_x000D_
    System.out.println(newCounter.count);_x000D_
    ois.close();_x000D_
  }_x000D_
_x000D_
}_x000D_
_x000D_
class Counter implements Serializable {_x000D_
_x000D_
  private static final long serialVersionUID = -628789568975888036 L;_x000D_
_x000D_
  int count;_x000D_
_x000D_
  Counter(int count) {_x000D_
    this.count = count;_x000D_
  }_x000D_
}

After running the program the output in your console window will be 10 and you can find the file inside Test folder by clicking on the icon show in below image.

javac only compiles the code. You need to use java command to run the code. The error is because your classpath doesn't contain the class Subclass iwhen you tried to compile it. you need to add them with the -cp variable in javac command

java -cp classpath-entries mainjava arg1 arg2 should run your code with 2 arguments

Update in 2018: I just got some points for this old answer, and just wanted to add that the best solution would be to make the operation idempotent so that duplicate submissions are harmless.

Eg, if the form creates an order, put a unique ID in the form. The first time the server sees an order creation request with that id, it should create it and respond "success". Subsequent submissions should also respond "success" (in case the client didn't get the first response) but shouldn't change anything.

Duplicates should be detected via a uniqueness check in the database to prevent race conditions.

I think that your problem is this line:

$('input').attr('disabled','disabled');

You're disabling ALL the inputs, including, I'd guess, the ones whose data the form is supposed to submit.

To disable just the submit button(s), you could do this:

$('button[type=submit], input[type=submit]').prop('disabled',true);

However, I don't think IE will submit the form if even those buttons are disabled. I'd suggest a different approach.

A jQuery plugin to solve it

We just solved this problem with the following code. The trick here is using jQuery's data() to mark the form as already submitted or not. That way, we don't have to mess with the submit buttons, which freaks IE out.

// jQuery plugin to prevent double submission of forms
jQuery.fn.preventDoubleSubmission = function() {
  $(this).on('submit',function(e){
    var $form = $(this);

    if ($form.data('submitted') === true) {
      // Previously submitted - don't submit again
      e.preventDefault();
    } else {
      // Mark it so that the next submit can be ignored
      $form.data('submitted', true);
    }
  });

  // Keep chainability
  return this;
};

Use it like this:

$('form').preventDoubleSubmission();

If there are AJAX forms that should be allowed to submit multiple times per page load, you can give them a class indicating that, then exclude them from your selector like this:

$('form:not(.js-allow-double-submission)').preventDoubleSubmission();

A good way to test if a string is a correct date is to use the command date:

if date -d "${DATE}" >/dev/null 2>&1
then
  # do what you need to do with your date
else
  echo "${DATE} incorrect date" >&2
  exit 1
fi

from comment: one can use formatting

if [ "2017-01-14" == $(date -d "2017-01-14" '+%Y-%m-%d') ] 

Minimal example

And just to make what Mizux said as a minimal example:

main_c.c

#include <stdio.h>

int main(void) {
    puts("hello");
}

main_cpp.cpp

#include <iostream>

int main(void) {
    std::cout << "hello" << std::endl;
}

Then, without any Makefile:

make CFLAGS='-g -O3' \
     CXXFLAGS='-ggdb3 -O0' \
     CPPFLAGS='-DX=1 -DY=2' \
     CCFLAGS='--asdf' \
     main_c \
     main_cpp

runs:

cc -g -O3 -DX=1 -DY=2   main_c.c   -o main_c
g++ -ggdb3 -O0 -DX=1 -DY=2   main_cpp.cpp   -o main_cpp

So we understand that:

• make had implicit rules to make main_c and main_cpp from main_c.c and main_cpp.cpp
• CFLAGS and CPPFLAGS were used as part of the implicit rule for .c compilation
• CXXFLAGS and CPPFLAGS were used as part of the implicit rule for .cpp compilation
• CCFLAGS is not used

Those variables are only used in make's implicit rules automatically: if compilation had used our own explicit rules, then we would have to explicitly use those variables as in:

main_c: main_c.c
    $(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $<

main_cpp: main_c.c
    $(CXX) $(CXXFLAGS) $(CPPFLAGS) -o $@ $<

to achieve a similar affect to the implicit rules.

We could also name those variables however we want: but since Make already treats them magically in the implicit rules, those make good name choices.

Tested in Ubuntu 16.04, GNU Make 4.1.

Try or:

WHERE id = 3 or id = 4

Or the equivalent in:

WHERE id in (3,4)

Just as another option if you want to print only the key (doesn't write the .env file) you can use:

php artisan key:generate --show

If you can't go over your time limit (it's a hard limit) then a thread is your best bet. You can use a loop to terminate the thread once you get to the time threshold. Whatever is going on in that thread at the time can be interrupted, allowing calculations to stop almost instantly. Here is an example:

Thread t = new Thread(myRunnable); // myRunnable does your calculations

long startTime = System.currentTimeMillis();
long endTime = startTime + 60000L;

t.start(); // Kick off calculations

while (System.currentTimeMillis() < endTime) {
    // Still within time theshold, wait a little longer
    try {
         Thread.sleep(500L);  // Sleep 1/2 second
    } catch (InterruptedException e) {
         // Someone woke us up during sleep, that's OK
    }
}

t.interrupt();  // Tell the thread to stop
t.join();       // Wait for the thread to cleanup and finish

That will give you resolution to about 1/2 second. By polling more often in the while loop, you can get that down.

Your runnable's run would look something like this:

public void run() {
    while (true) {
        try {
            // Long running work
            calculateMassOfUniverse();
        } catch (InterruptedException e) {
            // We were signaled, clean things up
            cleanupStuff();
            break;           // Leave the loop, thread will exit
    }
}

Update based on Dmitri's answer

Dmitri pointed out TimerTask, which would let you avoid the loop. You could just do the join call and the TimerTask you setup would take care of interrupting the thread. This would let you get more exact resolution without having to poll in a loop.

   Calendar cal = Calendar.getInstance();
   DateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd");
   System.out.println("Today's date is "+dateFormat.format(cal.getTime()));

   cal.add(Calendar.DATE, -1);
   System.out.println("Yesterday's date was "+dateFormat.format(cal.getTime()));  

Use Calender Api

In the book "Introduction to algorithms", third edition, by Cormen, Leiserson, Rivest and Stein, a binary search tree (BST) is explicitly defined as allowing duplicates. This can be seen in figure 12.1 and the following (page 287):

"The keys in a binary search tree are always stored in such a way as to satisfy the binary-search-tree property: Let x be a node in a binary search tree. If y is a node in the left subtree of x, then y:key <= x:key. If y is a node in the right subtree of x, then y:key >= x:key."

In addition, a red-black tree is then defined on page 308 as:

"A red-black tree is a binary search tree with one extra bit of storage per node: its color"

Therefore, red-black trees defined in this book support duplicates.

    public static bool CheckURLValid(this string source)
    {
        Uri uriResult;
        return Uri.TryCreate(source, UriKind.Absolute, out uriResult) && uriResult.Scheme == Uri.UriSchemeHttp;
    }

Usage:

string url = "htts://adasd.xc.";
if(url.CheckUrlValid())
{
  //valid process
}

UPDATE: (single line of code) Thanks @GoClimbColorado

public static bool CheckURLValid(this string source) => Uri.TryCreate(source, UriKind.Absolute, out Uri uriResult) && uriResult.Scheme == Uri.UriSchemeHttps;

Usage:

string url = "htts://adasd.xc.";
if(url.CheckUrlValid())
{
  //valid process
}

Sometimes because you are resolving your interface in ContainerBootstraper.cs it's very difficult to catch the error. In my case there was an error in resolving the implementation of the interface I've injected to the api controller. I couldn't find the error because I have resolve the interface in my bootstraperContainer like this: container.RegisterType<IInterfaceApi, MyInterfaceImplementaionHelper>(new ContainerControlledLifetimeManager());
then I've adde the following line in my bootstrap container : container.RegisterType<MyController>(); so when I compile the project , compiler complained and stopped in above line and showed the error.

I know Stack Overflow frowns on pasting URLs without explanations, but this particular page has a few really good options:

http://www.oratechinfo.co.uk/delimited_lists_to_collections.html

I particularly like this one, which converts the delimited list into a temporary table you can run queries against:

/* Create the output TYPE, here using a VARCHAR2(100) nested table type */

SQL> CREATE TYPE test_type AS TABLE OF VARCHAR2(100);
  2  /

Type created.

/* Now, create the function.*/

SQL> CREATE OR REPLACE FUNCTION f_convert(p_list IN VARCHAR2)
  2    RETURN test_type
  3  AS
  4    l_string       VARCHAR2(32767) := p_list || ',';
  5    l_comma_index  PLS_INTEGER;
  6    l_index        PLS_INTEGER := 1;
  7    l_tab          test_type := test_type();
  8  BEGIN
  9    LOOP
 10      l_comma_index := INSTR(l_string, ',', l_index);
 11      EXIT WHEN l_comma_index = 0;
 12      l_tab.EXTEND;
 13      l_tab(l_tab.COUNT) := SUBSTR(l_string, l_index, l_comma_index - l_index);
 14      l_index := l_comma_index + 1;
 15    END LOOP;
 16    RETURN l_tab;
 17  END f_convert;
 18  /

Function created.

/* Prove it works */

SQL> SELECT * FROM TABLE(f_convert('AAA,BBB,CCC,D'));

COLUMN_VALUE
--------------------------------------------------------------------------------
AAA
BBB
CCC
D

4 rows selected.

To get Consumer Key & Consumer Secret, you have to create an app in Twitter via

https://developer.twitter.com/en/apps

Then you'll be taken to a page containing Consumer Key & Consumer Secret.

Hopefully this information will clarify OAuth essentials for Twitter:

1. Create a Twitter account if you don't already have one
2. Visit 'https://apps.twitter.com' and follow the required prompts to create a developer project (Twitter requires you to answer some questions before they will approve your account. Approval was nearly instant in my case.)
3. Requesting the API key and secret via the Developer Portal causes Twitter to produce the following three things:

• API key (this is your 'consumer key')
• API secret key (this is your 'consumer secret')
• Bearer token

4. Next, visit the 'Authentication Tokens' area of the Developer Portal and generate an 'Access token & secret'. This will provide you with the following two items:

• Access token (this is your 'token key')
• Access token secret (this is your 'token secret')

5. The consumer key, consumer secret, token key, and token secret should be sufficient to do Twitter API calls (they were for me). Good luck!

Yes, use getScript instead of document.write - it will even allow for a callback once the file loads.

You might want to check if TinyMCE is defined, though, before including it (for subsequent calls to 'Add Comment') so the code might look something like this:

$('#add_comment').click(function() {
    if(typeof TinyMCE == "undefined") {
        $.getScript('tinymce.js', function() {
            TinyMCE.init();
        });
    }
});

Assuming you only have to call init on it once, that is. If not, you can figure it out from here :)

I would first make the to-be-merged branch as clean as possible. Run your tests, make sure the state is as you want it. Clean up the new commits by git squash.

Besides KingCrunches answer, I suggest to use

git checkout master
git pull origin master
git merge --squash test
git commit
git push origin master

You might have made many commits in the other branch, which should only be one commit in the master branch. To keep the commit history as clean as possible, you might want to squash all your commits from the test branch into one commit in the master branch (see also: Git: To squash or not to squash?). Then you can also rewrite the commit message to something very expressive. Something that is easy to read and understand, without digging into the code.

edit: You might be interested in

• In git, what is the difference between merge --squash and rebase?
• Merging vs. Rebasing
• How to Rebase a Pull Request

So on GitHub, I end up doing the following for a feature branch mybranch:

Get the latest from origin

$ git checkout master
$ git pull origin master

Find the merge base hash:

$ git merge-base mybranch master
c193ea5e11f5699ae1f58b5b7029d1097395196f

$ git checkout mybranch
$ git rebase -i c193ea5e11f5699ae1f58b5b7029d1097395196f

Now make sure only the first is pick, the rest is s:

pick 00f1e76 Add first draft of the Pflichtenheft
s d1c84b6 Update to two class problem
s 7486cd8 Explain steps better

Next choose a very good commit message and push to GitHub. Make the pull request then.

After the merge of the pull request, you can delete it locally:

$ git branch -d mybranch

and on GitHub

$ git push origin :mybranch

Grep is useful if you want to quickly search for lines that match in a file. It can also return some other simple information like matching line numbers, match count, and file name lists.

Awk is an entire programming language built around reading CSV-style files, processing the records, and optionally printing out a result data set. It can do many things but it is not the easiest tool to use for simple tasks.

Sed is useful when you want to make changes to a file based on regular expressions. It allows you to easily match parts of lines, make modifications, and print out results. It's less expressive than awk but that lends it to somewhat easier use for simple tasks. It has many more complicated operators you can use (I think it's even turing complete), but in general you won't use those features.

How about:

table {_x000D_
  table-layout: fixed; _x000D_
  width: 100%;_x000D_
  *margin-left: -100px; /*ie7*/_x000D_
}_x000D_
td, th {_x000D_
  vertical-align: top;_x000D_
  border-top: 1px solid #ccc;_x000D_
  padding: 10px;_x000D_
  width: 100px;_x000D_
}_x000D_
.fix {_x000D_
  position: absolute;_x000D_
  *position: relative; /*ie7*/_x000D_
  margin-left: -100px;_x000D_
  width: 100px;_x000D_
}_x000D_
.outer {_x000D_
  position: relative;_x000D_
}_x000D_
.inner {_x000D_
  overflow-x: scroll;_x000D_
  overflow-y: visible;_x000D_
  width: 400px; _x000D_
  margin-left: 100px;_x000D_
}

<div class="outer">_x000D_
  <div class="inner">_x000D_
    <table>_x000D_
      <tr>_x000D_
        <th class=fix></th>_x000D_
        <th>Col 1</th>_x000D_
        <th>Col 2</th>_x000D_
        <th>Col 3</th>_x000D_
        <th>Col 4</th>_x000D_
        <th class="fix">Col 5</th>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <th class=fix>Header A</th>_x000D_
        <td>col 1 - A</td>_x000D_
        <td>col 2 - A (WITH LONGER CONTENT)</td>_x000D_
        <td>col 3 - A</td>_x000D_
        <td>col 4 - A</td>_x000D_
        <td class=fix>col 5 - A</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <th class=fix>Header B</th>_x000D_
        <td>col 1 - B</td>_x000D_
        <td>col 2 - B</td>_x000D_
        <td>col 3 - B</td>_x000D_
        <td>col 4 - B</td>_x000D_
        <td class=fix>col 5 - B</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <th class=fix>Header C</th>_x000D_
        <td>col 1 - C</td>_x000D_
        <td>col 2 - C</td>_x000D_
        <td>col 3 - C</td>_x000D_
        <td>col 4 - C</td>_x000D_
        <td class=fix>col 5 - C</td>_x000D_
      </tr>_x000D_
    </table>_x000D_
  </div>_x000D_
</div>

You can test it out in this jsbin: http://jsbin.com/uxecel/4/edit

If you are using some of the examples they might not work

Here is my version for scroll view

/**
 * Sample React Native App
 * https://github.com/facebook/react-native
 */

import React, {
  AppRegistry,
  Component,
  StyleSheet,
  Text,
  View,
  ScrollView,
  TouchableOpacity,
  Image
} from 'react-native';

class AwesomeProject extends Component {
  render() {
    return (
        <View>
          <ScrollView
            ref={(scrollView) => { _scrollView = scrollView; }}
            automaticallyAdjustContentInsets={false}
            onScroll={() => { console.log('onScroll!'); }}
            scrollEventThrottle={200}
            style={styles.scrollView}>
            {THUMBS.map(createThumbRow)}
          </ScrollView>
          <TouchableOpacity
            style={styles.button}
            onPress={() => { _scrollView.scrollTo({y: 0}); }}>
            <Text>Scroll to top</Text>
          </TouchableOpacity>
        </View>
    );
  }
}

var Thumb = React.createClass({
  shouldComponentUpdate: function(nextProps, nextState) {
    return false;
  },
  render: function() {
    return (
      <View style={styles.button}>
        <Image style={styles.img} source={{uri:this.props.uri}} />
      </View>
    );
  }
});

var THUMBS = [
'http://loremflickr.com/320/240?random='+Math.round(Math.random()*10000) + 1,
'http://loremflickr.com/320/240?random='+Math.round(Math.random()*10000) + 1,
'http://loremflickr.com/320/240?random='+Math.round(Math.random()*10000) + 1
];

THUMBS = THUMBS.concat(THUMBS); // double length of THUMBS
var createThumbRow = (uri, i) => <Thumb key={i} uri={uri} />;

var styles = StyleSheet.create({
  scrollView: {
    backgroundColor: '#6A85B1',
    height: 600,
  },
  horizontalScrollView: {
    height: 120,
  },
  containerPage: {
    height: 50,
    width: 50,
    backgroundColor: '#527FE4',
    padding: 5,
  },
  text: {
    fontSize: 20,
    color: '#888888',
    left: 80,
    top: 20,
    height: 40,
  },
  button: {
    margin: 7,
    padding: 5,
    alignItems: 'center',
    backgroundColor: '#eaeaea',
    borderRadius: 3,
  },
  buttonContents: {
    flexDirection: 'row',
    width: 64,
    height: 64,
  },
  img: {
    width: 321,
    height: 200,
  }
});

AppRegistry.registerComponent('AwesomeProject', () => AwesomeProject);

Try:

sudo /etc/init.d/mysql reload

or

sudo /etc/init.d/mysql force-reload

That should initiate a reload of the configuration. Make sureyour init.d script supports it though, I don't know what version of MySQL/OS you are using?

My MySQL script contains the following:

'reload'|'force-reload')
        log_daemon_msg "Reloading MySQL database server" "mysqld"
        $MYADMIN reload
        log_end_msg 0
        ;;

This helped me to get rid of this error.This option disables -XX:+DisableExplicitGC

The default shortcut key is Ctrl-Alt-C.

What's wrong with this?

foo.replace(" ", "")[:-3].upper()

Here this should help you

The below jsfiddle link will help you understand how to rotate a image.I used the same one to rotate the dial of a clock.

http://jsfiddle.net/xw89p/

var rotation = function (){
   $("#image").rotate({
      angle:0, 
      animateTo:360, 
      callback: rotation,
      easing: function (x,t,b,c,d){       
          return c*(t/d)+b;
      }
   });
}
rotation();

Where: • t: current time,

• b: begInnIng value,

• c: change In value,

• d: duration,

• x: unused

No easing (linear easing): function(x, t, b, c, d) { return b+(t/d)*c ; }

If you want to do it one line and you do not want to change list1 or list2 you can do it using stream

List<String> list1 = Arrays.asList("London", "Paris");
List<String> list2 = Arrays.asList("Moscow", "Tver");

List<String> list = Stream.concat(list1.stream(),list2.stream()).collect(Collectors.toList());

Type in pip3 install yaml or like Connor pip3 install strictyaml

This happens when Laravel doesn't find a view file in your application. Make sure you have a file named: index.php or index.blade.php under your app/views directory.

Note that Laravel will do the following when calling View::make:

• For View::make('index') Laravel will look for the file: app/views/index.php.
• For View::make('index.foo') Laravel will look for the file: app/views/index/foo.php.

The file can have any of those two extensions: .php or .blade.php.

You can handle click on list view item like this:

<ListView.ItemTemplate>
  <DataTemplate>
     <Button BorderBrush="Transparent" Background="Transparent" Focusable="False">
        <i:Interaction.Triggers>
                <i:EventTrigger EventName="Click">
                    <i:InvokeCommandAction Command="{Binding DataContext.MyCommand, ElementName=ListViewName}" CommandParameter="{Binding}"/>
                </i:EventTrigger>
        </i:Interaction.Triggers>
      <Button.Template>
      <ControlTemplate>
         <Grid VerticalAlignment="Stretch" HorizontalAlignment="Stretch">
    ...

The pack() method is defined in Window class in Java and it sizes the frame so that all its contents are at or above their preferred sizes.

The accepted answer is good, but it can be greatly improved by additionally backing up on every save and backing up versioned files.

First, basic settings as described in the accepted answer:

(setq version-control t     ;; Use version numbers for backups.
      kept-new-versions 10  ;; Number of newest versions to keep.
      kept-old-versions 0   ;; Number of oldest versions to keep.
      delete-old-versions t ;; Don't ask to delete excess backup versions.
      backup-by-copying t)  ;; Copy all files, don't rename them.

Next, also backup versioned files, which Emacs does not do by default (you don't commit on every save, right?):

(setq vc-make-backup-files t)

Finally, make a backup on each save, not just the first. We make two kinds of backups:

1. per-session backups: once on the first save of the buffer in each Emacs session. These simulate Emac's default backup behavior.

2. per-save backups: once on every save. Emacs does not do this by default, but it's very useful if you leave Emacs running for a long time.

The backups go in different places and Emacs creates the backup dirs automatically if they don't exist:

;; Default and per-save backups go here:
(setq backup-directory-alist '(("" . "~/.emacs.d/backup/per-save")))

(defun force-backup-of-buffer ()
  ;; Make a special "per session" backup at the first save of each
  ;; emacs session.
  (when (not buffer-backed-up)
    ;; Override the default parameters for per-session backups.
    (let ((backup-directory-alist '(("" . "~/.emacs.d/backup/per-session")))
          (kept-new-versions 3))
      (backup-buffer)))
  ;; Make a "per save" backup on each save.  The first save results in
  ;; both a per-session and a per-save backup, to keep the numbering
  ;; of per-save backups consistent.
  (let ((buffer-backed-up nil))
    (backup-buffer)))

(add-hook 'before-save-hook  'force-backup-of-buffer)

I became very interested in this topic after I wrote $< instead of $@ in my Makefile, about three hours after my previous commit :P

The above is based on an Emacs Wiki page I heavily edited.

Bump...

I just had the same error. I noticed that I was invoking super.doPost(request, response); when overriding the doPost() method as well as explicitly invoking the superclass constructor

    public ScheduleServlet() {
        super();
        // TODO Auto-generated constructor stub
    }

As soon as I commented out the super.doPost(request, response); from within doPost() statement it worked perfectly...

protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

        //super.doPost(request, response);
        // More code here...

}

Needless to say, I need to re-read on super() best practices :p

@philipobenito's answer worked best for me.
I first created a hidden input that contain the user's HTTP referer

<input type="hidden" name="referer" value="<?= $_SERVER['HTTP_REFERER'] ?>" />

and after a successful login i redirected the users to whatever value was stored in that hidden input

$_POST = filter_input_array(INPUT_POST, FILTER_SANITIZE_STRING);
if(!empty($_POST['referer'])){
    header('Location: '.$_POST['referer']);
}
else{
    header('Location: members.php'); //members.php is a page used to send a user to their profile page.
}
exit;

function check_file_path(){
    [ -f "$1" ] && return
    [ -d "$1" ] && return
    return 1
}
check_file_path $path_or_file

It Works

To find master page controls on Child page

Label lbl_UserName = this.Master.FindControl("lbl_UserName") as Label;                    
lbl_UserName.Text = txtUsr.Text;

You can do it with _.pullAllBy.

var countries = {};_x000D_
_x000D_
countries.results = [_x000D_
    {id:'AF',name:'Afghanistan'},_x000D_
    {id:'AL',name:'Albania'},_x000D_
    {id:'DZ',name:'Algeria'}_x000D_
];_x000D_
_x000D_
// Remove element by id_x000D_
_.pullAllBy(countries.results , [{ 'id': 'AL' }], 'id');_x000D_
_x000D_
// Remove element by name_x000D_
// _.pullAllBy(countries.results , [{ 'name': 'Albania' }], 'name');_x000D_
console.log(countries);

.as-console-wrapper {_x000D_
  max-height: 100% !important;_x000D_
  top: 0;_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/lodash.js/4.17.11/lodash.min.js"></script>

exec is for statement and does not return anything. eval is for expression and returns value of expression.

expression means "something" while statement means "do something".

Parse the string into date, then compare using compareTo, before or after

Date d = new Date();
d.compareTo(anotherDate)

i.e

Date date1 = new SimpleDateFormat("MM/dd/yyyy").parse(date1string)
Date date2 = new SimpleDateFormat("MM/dd/yyyy").parse(date2string)

date1.compareTo(date2);

Copying the comment provided below by @MuhammadSaqib to complete this answer.

Returns the value 0 if the argument Date is equal to this Date; a value less than 0 if this Date is before the Date argument, and a value greater than 0 if this Date is after the Date argument. and NullPointerException - if anotherDate is null.

javadoc for compareTo http://docs.oracle.com/javase/6/docs/api/java/util/Date.html#compareTo(java.util.Date)

This is because require() does not exist in the browser/client-side JavaScript.

Now you're going to have to make some choices about your client-side JavaScript script management.

You have three options:

1. Use the <script> tag.
2. Use a CommonJS implementation. It has synchronous dependencies like Node.js
3. Use an asynchronous module definition (AMD) implementation.

CommonJS client side-implementations include (most of them require a build step before you deploy):

1. Browserify - You can use most Node.js modules in the browser. This is my personal favorite.
2. Webpack - Does everything (bundles JavaScript code, CSS, etc.). It was made popular by the surge of React, but it is notorious for its difficult learning curve.
3. Rollup - a new contender. It leverages ES6 modules and includes tree-shaking abilities (removes unused code).

You can read more about my comparison of Browserify vs (deprecated) Component.

AMD implementations include:

1. RequireJS - Very popular amongst client-side JavaScript developers. It is not my taste because of its asynchronous nature.

Note, in your search for choosing which one to go with, you'll read about Bower. Bower is only for package dependencies and is unopinionated on module definitions like CommonJS and AMD.

When an element, such as a div is floated, its parent container no longer considers its height, i.e.

<div id="main">
  <div id="child" style="float:left;height:40px;"> Hi</div>
</div>

The parent container will not be be 40 pixels tall by default. This causes a lot of weird little quirks if you're using these containers to structure layout.

So the clearfix class that various frameworks use fixes this problem by making the parent container "acknowledge" the contained elements.

Day to day, I normally just use frameworks such as 960gs, Twitter Bootstrap for laying out and not bothering with the exact mechanics.

Can read more here

http://www.webtoolkit.info/css-clearfix.html

I have Python 2.7.5, MySQL 5.6 and CentOS 7.1.1503.

For me it worked with the following command:

# pip install mysql-python

Note pre-requisites here:

Install Python pip:

# rpm -iUvh http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm

# yum -y update
Reboot the machine (if kernel is also updated)

# yum -y install python-pip

Install Python devel packages:

# yum install python-devel

Install MySQL devel packages:

# yum install mysql-devel

Solution using pointers:

#include<stdio.h>
#include<stdlib.h>
#define n 3
struct body
{
    double p[3];//position
    double v[3];//velocity
    double a[3];//acceleration
    double radius;
    double *mass;
};


int main()
{
    struct body *bodies = (struct body*)malloc(n*sizeof(struct body));
    int a, b;
     for(a = 0; a < n; a++)
     {
            for(b = 0; b < 3; b++)
            {
                bodies[a].p[b] = 0;
                bodies[a].v[b] = 0;
                bodies[a].a[b] = 0;
            }
            bodies[a].mass = 0;
            bodies[a].radius = 1.0;
     }

    return 0;
}

I had this to Run /execute but was not working

python3 -m http.server 8080

after reading and trying some of the solutions above and did not worked , what worked for me was

python -m http.server 8080

Actually, the correct solution is:

composer require vendor/package

Taken from the CLI documentation for Composer:

The require command adds new packages to the composer.json file from the current directory.

php composer.phar require

After adding/changing the requirements, the modified requirements will be installed or updated.

If you do not want to choose requirements interactively, you can just pass them to the command.

php composer.phar require vendor/package:2.* vendor/package2:dev-master

While it is true that composer update installs new packages found in composer.json, it will also update the composer.lock file and any installed packages according to any fuzzy logic (> or * chars after the colons) found in composer.json! This can be avoided by using composer update vendor/package, but I wouldn't recommend making a habit of it, as you're one forgotten argument away from a potentially broken project…

Keep things sane and stick with composer require vendor/package for adding new dependencies!

No, you cannot know when a page was last updated or last changed or uploaded to a server (which might, depending on interpretation, be three different things) just by accessing the page.

A server may, and should (according to the HTTP 1.1 protocol), send a Last-Modified header, which you can find out in several ways, e.g. using Rex Swain’s HTTP Viewer. However, according to the protocol, this is just

“the date and time at which the origin server believes the variant was last modified”.

And the protocol realistically adds:

“The exact meaning of this header field depends on the implementation of the origin server and the nature of the original resource. For files, it may be just the file system last-modified time. For entities with dynamically included parts, it may be the most recent of the set of last-modify times for its component parts. For database gateways, it may be the last-update time stamp of the record. For virtual objects, it may be the last time the internal state changed.”

In practice, web pages are very often dynamically created from a Content Management System or otherwise, and in such cases, the Last-Modified header typically shows a data stamp of creating the response, which is normally very close to the time of the request. This means that the header is practically useless in such cases.

Even in the case of a “static” page (the server simply picks up a file matching the request and sends it), the Last-Modified date stamp normally indicates just the last write access to the file on the server. This might relate to a time when the file was restored from a backup copy, or a time when the file was edited on the server without making any change to the content, or a time when it was uploaded onto the server, possibly replacing an older identical copy. In these cases, assuming that the time stamp is technically correct, it indicates a time after which the page has not been changed (but not necessarily the time of last change).

The bottom statement is equivalent to:

.half {
   flex-grow: 0;
   flex-shrink: 0;
   flex-basis: 50%;
}

Which, in this case, would be equivalent as the box is not allowed to flex and therefore retains the initial width set by flex-basis.

Flex-basis defines the default size of an element before the remaining space is distributed so if the element were allowed to flex (grow/shrink) it may not be 50% of the width of the page.

I've found that I regularly return to https://css-tricks.com/snippets/css/a-guide-to-flexbox/ for help regarding flexbox :)

Swift 4,

func rotateImage(image: UIImageView) {
        UIView.animate(withDuration: 1, animations: {
            image.transform = CGAffineTransform(rotationAngle: CGFloat.pi)
            image.transform = CGAffineTransform.identity
        }) { (completed) in
            self.rotateImage()
        }
    }

Ref

After some investigation and general hair-pulling the solution seems to be HTML2PDF. DOMPDF did a terrible job with tables, borders and even moderately complex layout and htmldoc seems reasonably robust but is almost completely CSS-ignorant and I don't want to go back to doing HTML layout without CSS just for that program.

HTML2PDF looked the most promising but I kept having this weird error about null reference arguments to node_type. I finally found the solution to this. Basically, PHP 5.1.x worked fine with regex replaces (preg_replace_*) on strings of any size. PHP 5.2.1 introduced a php.ini config directive called pcre.backtrack_limit. What this config parameter does is limits the string length for which matching is done. Why this was introduced I don't know. The default value was chosen as 100,000. Why such a low value? Again, no idea.

A bug was raised against PHP 5.2.1 for this, which is still open almost two years later.

What's horrifying about this is that when the limit is exceeded, the replace just silently fails. At least if an error had been raised and logged you'd have some indication of what happened, why and what to change to fix it. But no.

So I have a 70k HTML file to turn into PDF. It requires the following php.ini settings:

• pcre.backtrack_limit = 2000000; # probably more than I need but that's OK
• memory_limit = 1024M; # yes, one gigabyte; and
• max_execution_time = 600; # yes, 10 minutes.

Now the astute reader may have noticed that my HTML file is smaller than 100k. The only reason I can guess as to why I hit this problem is that html2pdf does a conversion into xhtml as part of the process. Perhaps that took me over (although nearly 50% bloat seems odd). Whatever the case, the above worked.

Now, html2pdf is a resource hog. My 70k file takes approximately 5 minutes and at least 500-600M of RAM to create a 35 page PDF file. Not quick enough (by far) for a real-time download unfortunately and the memory usage puts the memory usage ratio in the order of 1000-to-1 (600M of RAM for a 70k file), which is utterly ridiculous.

Unfortunately, that's the best I've come up with.

Looks like you're trying to duplicate the QUOTENAME functionality. This built-in function can be used to add delimiters and properly escape delimiters inside strings and recognizes both single ' and double " quotes as delimiters, as well as brackets [ and ].

I searched for a solution as well, and none of the answers I encountered solved the error, Until I found the answer of "ViRuSTriNiTy" to this thread: Undefined reference to 'boost::system::generic_category()'?

according to that answer, try to add these lines to your cmake file:

find_package(Boost 1.55.0 REQUIRED COMPONENTS system filesystem)
include_directories(... ${Boost_INCLUDE_DIRS})
link_directories(... ${Boost_LIBRARY_DIRS})
target_link_libraries(... ${Boost_LIBRARIES})

Sounds like a good job for regular expressions.

Laravel validation rules support regular expressions. Both 4.X and 5.X versions are supporting it :

• 4.2 : http://laravel.com/docs/4.2/validation#rule-regex
• 5.1 : http://laravel.com/docs/5.1/validation#rule-regex

This might help too:

http://www.regular-expressions.info/unicode.html

You need to use these parameters in your list view:

• Scroll lv.setTranscriptMode(ListView.TRANSCRIPT_MODE_ALWAYS_SCROLL);

• Set the head of the list to it bottom lv.setStackFromBottom(true);

You can also set these parameters in XML, eg. like this:

<ListView
   ...
   android:transcriptMode="alwaysScroll"
   android:stackFromBottom="true" />

Try with:

$row = mysqli_fetch_assoc($result);
echo "my result <a href='data/" . htmlentities($row['classtype'], ENT_QUOTES, 'UTF-8') . ".php'>My account</a>";

If you do not want to go the previous page i.e. do not let the user go back to the login screen once authorization is done, then you can use;

 App.Current.MainPage = new HomePage();

If you want to enable back functionality, just use

Navigation.PushModalAsync(new HomePage())

First, if you wanna cast type, then this:

import org.apache.spark.sql
df.withColumn("year", $"year".cast(sql.types.IntegerType))

With same column name, the column will be replaced with new one. You don't need to do add and delete steps.

Second, about Scala vs R.
This is the code that most similar to R I can come up with:

val df2 = df.select(
   df.columns.map {
     case year @ "year" => df(year).cast(IntegerType).as(year)
     case make @ "make" => functions.upper(df(make)).as(make)
     case other         => df(other)
   }: _*
)

Though the code length is a little longer than R's. That is nothing to do with the verbosity of the language. In R the mutate is a special function for R dataframe, while in Scala you can easily ad-hoc one thanks to its expressive power.
In word, it avoid specific solutions, because the language design is good enough for you to quickly and easy build your own domain language.

side note: df.columns is surprisingly a Array[String] instead of Array[Column], maybe they want it look like Python pandas's dataframe.

In swift 4.2 I used following code to show and hide code using NSNotification

 @objc func keyboardWillShow(notification: NSNotification) {
    if let keyboardSize = (notification.userInfo? [UIResponder.keyboardFrameEndUserInfoKey] as? NSValue)?.cgRectValue {
        let keyboardheight = keyboardSize.height
        print(keyboardheight)
    }
}

Check this answer for C++11. Basically, if you pass an lvalue the rvalue reference

From this article:

void f1(String s) {
    vector<String> v;
    v.push_back(std::move(s));
}
void f2(const String &s) {
    vector<String> v;
    v.push_back(s);
}

"For lvalue argument, ‘f1’ has one extra copy to pass the argument because it is by-value, while ‘f2’ has one extra copy to call push_back. So no difference; for rvalue argument, the compiler has to create a temporary ‘String(L“”)’ and pass the temporary to ‘f1’ or ‘f2’ anyway. Because ‘f2’ can take advantage of move ctor when the argument is a temporary (which is an rvalue), the costs to pass the argument are the same now for ‘f1’ and ‘f2’."

Continuing: " This means in C++11 we can get better performance by using pass-by-value approach when:

1. The parameter type supports move semantics - All standard library components do in C++11
2. The cost of move constructor is much cheaper than the copy constructor (both the time and stack usage).
3. Inside the function, the parameter type will be passed to another function or operation which supports both copy and move.
4. It is common to pass a temporary as the argument - You can organize you code to do this more.

"

OTOH, for C++98 it is best to pass by reference - less data gets copied around. Passing const or non const depend of whether you need to change the argument or not.

If you are using jQuery UI, you can format any date with:

<html>
    <body>
        Your date formated: <span id="date1"></span><br/>
    </body>
</html>

var myDate = '30.11.2011';
var parsedDate = $.datepicker.parseDate('dd.mm.yy', myDate);

$('#date1').text($.datepicker.formatDate('M d, yy', parsedDate));

http://jsfiddle.net/mescalito2345/ND2Qg/14/

You need to put the font files in assets folder (may be a fonts sub-folder within assets) and refer to it in the styles:

@font-face {
  font-family: lato;
  src: url(assets/font/Lato.otf) format("opentype");
}

Once done, you can apply this font any where like:

* {
  box-sizing: border-box;
  margin: 0;
  padding: 0;
  font-family: 'lato', 'arial', sans-serif;
}

You can put the @font-face definition in your global styles.css or styles.scss and you would be able to refer to the font anywhere - even in your component specific CSS/SCSS. styles.css or styles.scss is already defined in angular-cli.json. Or, if you want you can create a separate CSS/SCSS file and declare it in angular-cli.json along with the styles.css or styles.scss like:

"styles": [
  "styles.css",
  "fonts.css"
],

MacPorts is another package manager for OS X:.

Installation instructions are at The MacPorts Project -- Download & Installation after which one issues sudo port install pythonXX, where XX is 27 or 35.

SELECT GETDATE() + (hours / 24.00000000000000000)

Adding to GETDATE() defaults to additional days, but it will also convert down to hours/seconds/milliseconds using decimal.

You can call sortable on a <tbody> instead of on the individual rows.

<table>
    <tbody>
        <tr> 
            <td>1</td>
            <td>2</td>
        </tr>
        <tr>
            <td>3</td>
            <td>4</td> 
        </tr>
        <tr>
            <td>5</td>
            <td>6</td>
        </tr>  
    </tbody>    
</table>?

<script>
    $('tbody').sortable();
</script> 

$(function() {_x000D_
  $( "tbody" ).sortable();_x000D_
});

 _x000D_
table {_x000D_
    border-spacing: collapse;_x000D_
    border-spacing: 0;_x000D_
}_x000D_
td {_x000D_
    width: 50px;_x000D_
    height: 25px;_x000D_
    border: 1px solid black;_x000D_
}

 _x000D_
_x000D_
<link href="//code.jquery.com/ui/1.11.1/themes/smoothness/jquery-ui.css" rel="stylesheet">_x000D_
<script src="//code.jquery.com/jquery-1.11.1.js"></script>_x000D_
<script src="//code.jquery.com/ui/1.11.1/jquery-ui.js"></script>_x000D_
_x000D_
<table>_x000D_
    <tbody>_x000D_
        <tr>_x000D_
            <td>1</td>_x000D_
            <td>2</td>_x000D_
        </tr>_x000D_
        <tr>_x000D_
            <td>3</td>_x000D_
            <td>4</td>_x000D_
        </tr>_x000D_
        <tr> _x000D_
            <td>5</td>_x000D_
            <td>6</td>_x000D_
        </tr>_x000D_
        <tr>_x000D_
            <td>7</td>_x000D_
            <td>8</td>_x000D_
        </tr>_x000D_
        <tr>_x000D_
            <td>9</td> _x000D_
            <td>10</td>_x000D_
        </tr>  _x000D_
    </tbody>    _x000D_
</table>

I think you should only use ng-model and should work well for you, here is the link to the official documentation of angular https://docs.angularjs.org/api/ng/input/input%5Bradio%5D

The code from the example should not be difficult to adapt to your specific situation:

<script>
   function Ctrl($scope) {
      $scope.color = 'blue';
      $scope.specialValue = {
         "id": "12345",
         "value": "green"
      };
   }
</script>
<form name="myForm" ng-controller="Ctrl">
   <input type="radio" ng-model="color" value="red">  Red <br/>
   <input type="radio" ng-model="color" ng-value="specialValue"> Green <br/>
   <input type="radio" ng-model="color" value="blue"> Blue <br/>
   <tt>color = {{color | json}}</tt><br/>
</form>

Use String.Format() or TextWriter.Format() (depending on how you actually write to the file) and specify the width of a field.

String.Format("{0,20}{1,15}{2,15}", "Sample Title One", "Element One", "Whatever Else");

You can specify the width of a field within interpolated strings as well:

$"{"Sample Title One",20}{"Element One",15}{"Whatever Else",15}"

And just so you know, you can create a string of repeated characters using the appropriate string contructor.

new String(' ', 20); // string of 20 spaces

In case you want to find other node besides "Alpha", the query should be something like this:

select Roles from MyTable where Roles.exist('(/*:root/*:role[contains(.,"Beta")])') = 1

The accepted answer is correct. Just wanted to add one more option. You also can use try ... catch block to handle this situation. A freaky example:

var a;
try {
    a = b + 1;  // throws ReferenceError if b is not defined
} 
catch (e) {
    a = 1;      // apply some default behavior in case of error
}
finally {
    a = a || 0; // normalize the result in any case
}

Be aware of catch block, which is a bit messy, as it creates a block-level scope. And, of course, the example is extremely simplified to answer the asked question, it does not cover best practices in error handling ;).

String S1="abc";
S1.concat("xyz");
System.out.println("S1 is", + S1);
String S2=S1.concat("def");
System.out.println("S2 is", + S2);

This shows that once a string object is create it cannot be changed. EveryTime you need to create new and put in another String. S

Besides being a bit easier to read and adding a few more operators, it's also beneficial if your application is internationalized. A lot of times the variables are numbers or key words which will be in a different order for different languages. By using String.Format, your code can remain unchanged while different strings will go into resource files. So, the code would end up being

String.Format(resource.GetString("MyResourceString"), str1, str2, str3);

While your resource strings end up being

English: "blah blah {0} blah blah {1} blah {2}"

Russian: "{0} blet blet blet {2} blet {1}"

Where Russian may have different rules on how things get addressed so the order is different or sentence structure is different.

You set the CSS to :

#elementID {
    background: black url(http://www.electrictoolbox.com/images/rangitoto-3072x200.jpg) center no-repeat;
    height: 200px;
}

It centers the image, but does not scale it.

FIDDLE

In newer browsers you can use the background-size property and do:

#elementID {
    height: 200px; 
    width: 100%;
    background: black url(http://www.electrictoolbox.com/images/rangitoto-3072x200.jpg) no-repeat;
    background-size: 100% 100%;
}

FIDDLE

Other than that, a regular image is one way to do it, but then it's not really a background image.

?

move c:\Sourcefoldernam\*.* e:\destinationFolder

^ This did not work for me for some reason

But when I tried using quotation marks, it suddenly worked:

move "c:\Sourcefoldernam\*.*" "e:\destinationFolder"

I think its because my directory had spaces in one of the folders. So if it doesn't work for you, try with quotation marks!

You can have multiple CTEs in one query, as well as reuse a CTE:

WITH    cte1 AS
        (
        SELECT  1 AS id
        ),
        cte2 AS
        (
        SELECT  2 AS id
        )
SELECT  *
FROM    cte1
UNION ALL
SELECT  *
FROM    cte2
UNION ALL
SELECT  *
FROM    cte1

Note, however, that SQL Server may reevaluate the CTE each time it is accessed, so if you are using values like RAND(), NEWID() etc., they may change between the CTE calls.

If you are like me and you somehow have full file paths (I did some glob() pattern matching on required photos so I do pretty much end up with full file paths), and your storage setup is well linked (i.e. such that your paths have the string storage/app/public/), then you can use my little dirty hack below :p)

 public static function hackoutFileFromStorageFolder($fullfilePath) {
        if (strpos($fullfilePath, 'storage/app/public/')) {
           $fileParts = explode('storage/app/public/', $fullfilePath);
           if( count($fileParts) > 1){
               return $fileParts[1];
           }
        }

        return '';
    }

When using NOT IN, you should also consider NOT EXISTS, which handles the null cases silently. See also PostgreSQL Wiki

SELECT mac, creation_date 
FROM logs lo
WHERE logs_type_id=11
AND NOT EXISTS (
  SELECT *
  FROM consols nx
  WHERE nx.mac = lo.mac
  );

You can convert that time in Unix timestamp by using

select UNIX_TIMESTAMP('2013-11-26 01:24:34')

then convert it in the readable format in whatever format you need

select from_unixtime(UNIX_TIMESTAMP('2013-11-26 01:24:34'),"%Y-%m-%d");

For in detail you can visit link

The other possibility is using just numpy and it gives you the interior angle

import numpy as np

p0 = [3.5, 6.7]
p1 = [7.9, 8.4]
p2 = [10.8, 4.8]

''' 
compute angle (in degrees) for p0p1p2 corner
Inputs:
    p0,p1,p2 - points in the form of [x,y]
'''

v0 = np.array(p0) - np.array(p1)
v1 = np.array(p2) - np.array(p1)

angle = np.math.atan2(np.linalg.det([v0,v1]),np.dot(v0,v1))
print np.degrees(angle)

and here is the output:

In [2]: p0, p1, p2 = [3.5, 6.7], [7.9, 8.4], [10.8, 4.8]

In [3]: v0 = np.array(p0) - np.array(p1)

In [4]: v1 = np.array(p2) - np.array(p1)

In [5]: v0
Out[5]: array([-4.4, -1.7])

In [6]: v1
Out[6]: array([ 2.9, -3.6])

In [7]: angle = np.math.atan2(np.linalg.det([v0,v1]),np.dot(v0,v1))

In [8]: angle
Out[8]: 1.8802197318858924

In [9]: np.degrees(angle)
Out[9]: 107.72865519428085

You are right, it is simple. Run (admin password required):

'/Library/Application Support/Jenkins/Uninstall.command'

It may be necessary to do this with admin privileges using sudo.

I use inf/-inf as initial values to find minimum/maximum value of a measurement. Lets say that you measure temperature with a sensor and you want to keep track of minimum/maximum temperature. The sensor might provide a valid temperature or might be broken. Pseudocode:

# initial value of the temperature
t = float('nan')          
# initial value of minimum temperature, so any measured temp. will be smaller
t_min = float('inf')      
# initial value of maximum temperature, so any measured temp. will be bigger
t_max = float('-inf')     
while True:
    # measure temperature, if sensor is broken t is not changed
    t = measure()     
    # find new minimum temperature
    t_min = min(t_min, t) 
    # find new maximum temperature
    t_max = max(t_max, t) 

The above code works because inf/-inf/nan are valid for min/max operation, so there is no need to deal with exceptions.

if u wanna use async await try

export const post = async ( link,data ) => {
const option = {
    method: 'post',
    url: `${URL}${link}`,
    validateStatus: function (status) {
        return status >= 200 && status < 300; // default
      },
    data
};

try {
    const response = await axios(option);
} catch (error) {
    const { response } = error;
    const { request, ...errorObject } = response; // take everything but 'request'
    console.log(errorObject);
}

It works to me:

Testing Code of mine:

$var2['data'] = array ('a'=>'21','b'=>'32','c'=>'55','d'=>'66','e'=>'77');
foreach($var2 as $result)
{  
    $test = $result['c'];
}
print_r($test);

Output: 55

Check it guys. Thanks

try parsing a default value which can be returned by max if length of v none

max(v, default=0)

An answer from 2020. The following code solves this. A lot of people new to selenium seem to have to get past this step. Install the chromedriver and put it inside a folder on your desktop. Also make sure to put the selenium python project in the same folder as where the chrome driver is located.

Change USER_NAME and FOLDER in accordance to your computer.

For Windows

driver = webdriver.Chrome(r"C:\Users\USER_NAME\Desktop\FOLDER\chromedriver")

For Linux/Mac

driver = webdriver.Chrome("/home/USER_NAME/FOLDER/chromedriver")

How about

View view = Activity.getCurrentFocus();

We can set the response headers in Python Flask application using Flask application context using flask.g

This way of setting response headers in Flask application context using flask.g is thread safe and can be used to set custom & dynamic attributes from any file of application, this is especially helpful if we are setting custom/dynamic response headers from any helper class, that can also be accessed from any other file ( say like middleware, etc), this flask.g is global & valid for that request thread only.

Say if i want to read the response header from another api/http call that is being called from this app, and then extract any & set it as response headers for this app.

Sample Code: file: helper.py

import flask
from flask import request, g
from multidict import CIMultiDict
from asyncio import TimeoutError as HttpTimeout
from aiohttp import ClientSession

    def _extract_response_header(response)
      """
      extracts response headers from response object 
      and stores that required response header in flask.g app context
      """
      headers = CIMultiDict(response.headers)
      if 'my_response_header' not in g:
        g.my_response_header= {}
        g.my_response_header['x-custom-header'] = headers['x-custom-header']


    async def call_post_api(post_body):
      """
      sample method to make post api call using aiohttp clientsession
      """
      try:
        async with ClientSession() as session:
          async with session.post(uri, headers=_headers, json=post_body) as response:
            responseResult = await response.read()
            _extract_headers(response, responseResult)
            response_text = await response.text()
      except (HttpTimeout, ConnectionError) as ex:
        raise HttpTimeout(exception_message)

file: middleware.py

import flask
from flask import request, g

class SimpleMiddleWare(object):
    """
    Simple WSGI middleware
    """

    def __init__(self, app):
        self.app = app
        self._header_name = "any_request_header"

    def __call__(self, environ, start_response):
        """
        middleware to capture request header from incoming http request
        """
        request_id_header = environ.get(self._header_name)
        environ[self._header_name] = request_id_header

        def new_start_response(status, response_headers, exc_info=None):
            """
            set custom response headers
            """
            # set the request header as response header
            response_headers.append((self._header_name, request_id_header))
            # this is trying to access flask.g values set in helper class & set that as response header
            values = g.get(my_response_header, {})
            if values.get('x-custom-header'):
                response_headers.append(('x-custom-header', values.get('x-custom-header')))
            return start_response(status, response_headers, exc_info)

        return self.app(environ, new_start_response)

Calling the middleware from main class

file : main.py

from flask import Flask
import asyncio
from gevent.pywsgi import WSGIServer
from middleware import SimpleMiddleWare

    app = Flask(__name__)
    app.wsgi_app = SimpleMiddleWare(app.wsgi_app)

just add these assuming your data array is 'data'

func tableView(_ tableView: UITableView, canEditRowAt indexPath: IndexPath) -> Bool {
    return true
}

func tableView(_ tableView: UITableView, commit editingStyle: UITableViewCellEditingStyle, forRowAt indexPath: IndexPath) {
    if (editingStyle == UITableViewCellEditingStyle.delete) {
        // handle delete (by removing the data from your array and updating the tableview)
        if let tv=table
        {



            data.remove(at: indexPath.row)
            tv.deleteRows(at: [indexPath], with: .fade)



        }
    }
}

Write Thread.sleep(1000); it will make the thread sleep for 1000ms

Yet another variation. Handles Nullables, as well as situations where the string is null and T is not nullable.

public class TypedProperty<T> : Property where T : IConvertible
{
    public T TypedValue
    {
        get
        {
            if (base.Value == null) return default(T);
            var type = Nullable.GetUnderlyingType(typeof(T)) ?? typeof(T);
            return (T)Convert.ChangeType(base.Value, type);
        }
        set { base.Value = value.ToString(); }
    }
}

Maven way

If you use Maven, you can run the following command to run all your test cases:

mvn clean test

Or you can run a particular test as below

mvn clean test -Dtest=your.package.TestClassName
mvn clean test -Dtest=your.package.TestClassName#particularMethod

If you would like to see the stack trace (if any) in the console instead of report files in the target\surefire-reports folder, set the user property surefire.useFile to false. For example:

mvn clean test -Dtest=your.package.TestClassName -Dsurefire.useFile=false

Gradle way

If you use Gradle, you can run the following command to run all your test cases:

gradle test

Or you can run a particular test as below

gradle test --tests your.package.TestClassName
gradle test --tests your.package.TestClassName.particularMethod

If you would like more information, you can consider options such as --stacktrace, or --info, or --debug.

For example, when you run Gradle with the info logging level --info, it will show you the result of each test while they are running. If there is any exception, it will show you the stack trace, pointing out what the problem is.

gradle test --info

If you would like to see the overall test results, you can open the report in the browser, for example (Open it using Google Chrome in Ubuntu):

google-chrome build/reports/tests/index.html

Ant way

Once you set up your Ant build file build.xml, you can run your JUnit test cases from the command line as below:

ant -f build.xml <Your JUnit test target name>

You can follow the link below to read more about how to configure JUnit tests in the Ant build file: https://ant.apache.org/manual/Tasks/junit.html

Normal way

If you do not use Maven, or Gradle or Ant, you can follow the following way:

First of all, you need to compile your test cases. For example (in Linux):

javac -d /absolute/path/for/compiled/classes -cp /absolute/path/to/junit-4.12.jar /absolute/path/to/TestClassName.java

Then run your test cases. For example:

java -cp /absolute/path/for/compiled/classes:/absolute/path/to/junit-4.12.jar:/absolute/path/to/hamcrest-core-1.3.jar org.junit.runner.JUnitCore your.package.TestClassName

Bootstrap 4:

<div class="w-100"></div>

Source: https://v4-alpha.getbootstrap.com/layout/grid/#equal-width-multi-row

If using eclipse,

Under.settings click on org.eclipse.wst.common.project.facet.core.xml

<?xml version="1.0" encoding="UTF-8"?>
<faceted-project>
  <installed facet="java" version="1.7"/>
</faceted-project>

Change the version to the correct version.

You can use the split() function to break input on the basis of line break.

yourString.split("\n")

This is my solution

extension UINavigationController: UINavigationBarDelegate {
    public func navigationBar(_ navigationBar: UINavigationBar, shouldPop item: UINavigationItem) -> Bool {
        if let shouldBlock = self.topViewController?.shouldPopFromNavigation() {
            return shouldBlock
        }
        return true
    }
}

extension UIViewController {
    @objc func shouldPopFromNavigation() -> Bool {
        return true
    }
}

In your view controller, you can handle like this:

@objc override func shouldPopFromNavigation() -> Bool {
        // Your dialog, example UIAlertViewController or whatever you want
        return false
    }

The above were really close. Here's my solution:

Private Sub getDsClone(ByRef inClone As DataSet, ByVal matchStr As String, ByRef outClone As DataSet)
    Dim i As Integer

    outClone = inClone.Clone
    Dim dv As DataView = inClone.Tables(0).DefaultView
    dv.RowFilter = matchStr
    Dim dt As New DataTable
    dt = dv.ToTable
    For i = 0 To dv.Count - 1
        outClone.Tables(0).ImportRow(dv.Item(i).Row)
    Next
End Sub

It is also worth to mention, that if you DO NOT intent to modify the values of the list, it is possible (and better) to use the const_iterator, as follows:

for (std::list<Student>::const_iterator it = data.begin(); it != data.end(); ++it){
    // do whatever you wish but don't modify the list elements
    std::cout << it->name;
}

You can do this also:

$("a.markAsDone").click(function (event) {
    event.preventDefault();

    $.ajax({
        type: "post",
        dataType: "html",
        url: $(this).attr("rel"),
        data: $('<form>@Html.AntiForgeryToken()</form>').serialize(),
        success: function (response) {
        // ....
        }
    });
});

This is using Razor, but if you're using WebForms syntax you can just as well use <%= %> tags

With the xhr2 library you can globally overwrite XMLHttpRequest from your JS code. This allows you to use external libraries in node, that were intended to be run from browsers / assume they are run in a browser.

global.XMLHttpRequest = require('xhr2');

I pointed the non-www to 54.243.64.13 and the www.domain.com to the alias.herokuapp.com and all worked nicely.

Found the IP only after pointing www.domain.com and then running the dig command on the www.domain.com and it showed:

;; ANSWER SECTION:
www.domain.com. 14400  IN      CNAME   aliasat.herokuapp.com.
aliasat.herokuapp.com. 300 IN CNAME us-east-1-a.route.herokuapp.com.
us-east-1-a.route.herokuapp.com. 60 IN  A       54.235.186.37

;; AUTHORITY SECTION:
herokuapp.com.          900     IN      NS      ns-1378.awsdns-44.org.
herokuapp.com.          900     IN      NS      ns-1624.awsdns-11.co.uk.
herokuapp.com.          900     IN      NS      ns-505.awsdns-63.com.
herokuapp.com.          900     IN      NS      ns-662.awsdns-18.net.

May not be ideal but worked.

When you initialize unsigned int a to -1; it means that you are storing the 2's complement of -1 into the memory of a.
Which is nothing but 0xffffffff or 4294967295.

Hence when you print it using %x or %u format specifier you get that output.

By specifying signedness of a variable to decide on the minimum and maximum limit of value that can be stored.

Like with unsigned int: the range is from 0 to 4,294,967,295 and int: the range is from -2,147,483,648 to 2,147,483,647

For more info on signedness refer this

The easiest way to protect yourself is to use stored procedures instead of inline SQL statements.

Then use "least privilege" permissions and only allow access to stored procedures and not directly to tables.

using (StreamWriter writer = new StreamWriter(File.Open(@"E:\Sample.txt", FileMode.Append), Encoding.GetEncoding(1250)))  ////File.Create(path)
        {
            writer.Write("Sample Text");
        }

In Python 3.8+ you can do

import hashlib

with open("your_filename.png", "rb") as f:
    file_hash = hashlib.md5()
    while chunk := f.read(8192):
        file_hash.update(chunk)

print(file_hash.digest())
print(file_hash.hexdigest())  # to get a printable str instead of bytes

On Python 3.7 and below:

with open("your_filename.png", "rb") as f:
    file_hash = hashlib.md5()
    chunk = f.read(8192)
    while chunk:
        file_hash.update(chunk)
        chunk = f.read(8192)

print(file_hash.hexdigest())

This reads the file 8192 (or 2¹³) bytes at a time instead of all at once with f.read() to use less memory.

Consider using hashlib.blake2b instead of md5 (just replace md5 with blake2b in the above snippets). It's cryptographically secure and faster than MD5.

Like this

Vehicle[] car = new Vehicle[10];

Do not use the * selector as that will apply to all elements on the page. Suppose you have a structure like this:

...
<body>
    <div id="content">
        <b>This is the main container.</b>
    </div>
</body>
</html>

You can then center the #content div using:

#content {
    width: 400px;
    margin: 0 auto;
    background-color: #66ffff;
}

Don't know what you've seen elsewhere but this is the way to go. The * { margin: 0; padding: 0; } snippet you've seen is for resetting browser's default definitions for all browsers to make your site behave similarly on all browsers, this has nothing to do with centering the main container.

Most browsers apply a default margin and padding to some elements which usually isn't consistent with other browsers' implementations. This is why it is often considered smart to use this kind of 'resetting'. The reset snippet you presented is the most simplest of reset stylesheets, you can read more about the subject here:

• http://meyerweb.com/eric/tools/css/reset/

I would also like to add something from me.

Other possible syntax to call functions with the ternary operator, would be:

(condition ? fn1 : fn2)();

It can be handy if you have to pass the same list of parameters to both functions, so you have to write them only once.

(condition ? fn1 : fn2)(arg1, arg2, arg3, arg4, arg5);

You can use the ternary operator even with member function names, which I personally like very much to save space:

$('.some-element')[showThisElement ? 'addClass' : 'removeClass']('visible');

or

$('.some-element')[(showThisElement ? 'add' : 'remove') + 'Class']('visible');

Another example:

var addToEnd = true; //or false
var list = [1,2,3,4];
list[addToEnd ? 'push' : 'unshift'](5);

You could use a variable to make the calculation and use toFixed when you set the #diskamountUnit element value:

var amount = $("#disk").slider("value") * 1.60;
$("#diskamountUnit").val('$' + amount.toFixed(2));

You can also do that in one step, in the val method call but IMO the first way is more readable:

$("#diskamountUnit").val('$' + ($("#disk").slider("value") * 1.60).toFixed(2));

In SQL Server 2008 you can insert multiple rows using a single SQL INSERT statement.

INSERT INTO MyTable ( Column1, Column2 ) VALUES
( Value1, Value2 ), ( Value1, Value2 )

For reference to this have a look at MOC Course 2778A - Writing SQL Queries in SQL Server 2008.

For example:

INSERT INTO MyTable
  ( Column1, Column2, Column3 )
VALUES
  ('John', 123, 'Lloyds Office'), 
  ('Jane', 124, 'Lloyds Office'), 
  ('Billy', 125, 'London Office'),
  ('Miranda', 126, 'Bristol Office');

Can this not be done simply by adding a additional "container" div and adding the removed alert div back into it each time. Seems to work for me?

HTML

<div id="alert_container"></div>

JS

 $("#alert_container").html('<div id="alert"></div>');          
 $("#alert").addClass("alert alert-info  alert-dismissible");
 $("#alert").html('<a href="#" class="close" data-dismiss="alert" aria-label="close">&times;</a><strong>Info!</strong>message');

This is an update for UIDeviceHardware.m from the answer above.

- (NSString *)platformString
{
    NSString *platform = [self platform];

    if ([platform isEqualToString:@"iPhone1,1"])    return @"iPhone 1G";
    if ([platform isEqualToString:@"iPhone1,2"])    return @"iPhone 3G";
    if ([platform isEqualToString:@"iPhone2,1"])    return @"iPhone 3GS";
    if ([platform isEqualToString:@"iPhone3,1"])    return @"iPhone 4";
    if ([platform isEqualToString:@"iPhone3,3"])    return @"Verizon iPhone 4";
    if ([platform isEqualToString:@"iPhone4,1"])    return @"iPhone 4S";
    if ([platform isEqualToString:@"iPhone5,1"])    return @"iPhone 5 (GSM)";
    if ([platform isEqualToString:@"iPhone5,2"])    return @"iPhone 5 (GSM+CDMA)";
    if ([platform isEqualToString:@"iPhone5,3"])    return @"iPhone 5c (GSM)";
    if ([platform isEqualToString:@"iPhone5,4"])    return @"iPhone 5c (GSM+CDMA)";
    if ([platform isEqualToString:@"iPhone6,1"])    return @"iPhone 5s (GSM)";
    if ([platform isEqualToString:@"iPhone6,2"])    return @"iPhone 5s (GSM+CDMA)";
    if ([platform isEqualToString:@"iPhone7,1"])    return @"iPhone 6";
    if ([platform isEqualToString:@"iPhone7,2"])    return @"iPhone 6 Plus";
    if ([platform isEqualToString:@"iPhone8,1"])    return @"iPhone 6s";
    if ([platform isEqualToString:@"iPhone8,2"])    return @"iPhone 6s Plus";
    if ([platform isEqualToString:@"iPhone8,4"])    return @"iPhone SE";
    if ([platform isEqualToString:@"iPod1,1"])      return @"iPod Touch 1G";
    if ([platform isEqualToString:@"iPod2,1"])      return @"iPod Touch 2G";
    if ([platform isEqualToString:@"iPod3,1"])      return @"iPod Touch 3G";
    if ([platform isEqualToString:@"iPod4,1"])      return @"iPod Touch 4G";
    if ([platform isEqualToString:@"iPod5,1"])      return @"iPod Touch 5G";
    if ([platform isEqualToString:@"iPod7,1"])      return @"iPod Touch 6G";
    if ([platform isEqualToString:@"iPad1,1"])      return @"iPad";
    if ([platform isEqualToString:@"iPad2,1"])      return @"iPad 2 (WiFi)";
    if ([platform isEqualToString:@"iPad2,2"])      return @"iPad 2 (GSM)";
    if ([platform isEqualToString:@"iPad2,3"])      return @"iPad 2 (CDMA)";
    if ([platform isEqualToString:@"iPad2,4"])      return @"iPad 2 (WiFi)";
    if ([platform isEqualToString:@"iPad2,5"])      return @"iPad Mini (WiFi)";
    if ([platform isEqualToString:@"iPad2,6"])      return @"iPad Mini (GSM)";
    if ([platform isEqualToString:@"iPad2,7"])      return @"iPad Mini (GSM+CDMA)";
    if ([platform isEqualToString:@"iPad3,1"])      return @"iPad 3 (WiFi)";
    if ([platform isEqualToString:@"iPad3,2"])      return @"iPad 3 (GSM+CDMA)";
    if ([platform isEqualToString:@"iPad3,3"])      return @"iPad 3 (GSM)";
    if ([platform isEqualToString:@"iPad3,4"])      return @"iPad 4 (WiFi)";
    if ([platform isEqualToString:@"iPad3,5"])      return @"iPad 4 (GSM)";
    if ([platform isEqualToString:@"iPad3,6"])      return @"iPad 4 (GSM+CDMA)";
    if ([platform isEqualToString:@"iPad4,1"])      return @"iPad Air (WiFi)";
    if ([platform isEqualToString:@"iPad4,2"])      return @"iPad Air (Cellular)";
    if ([platform isEqualToString:@"iPad4,4"])      return @"iPad mini 2G (WiFi)";
    if ([platform isEqualToString:@"iPad4,5"])      return @"iPad mini 2G (Cellular)";
    if ([platform isEqualToString:@"iPad5,1"])      return @"iPad mini 4 (WiFi)";
    if ([platform isEqualToString:@"iPad5,2"])      return @"iPad mini 4 (Cellular)";
    if ([platform isEqualToString:@"iPad5,3"])      return @"iPad Air 2 (WiFi)";
    if ([platform isEqualToString:@"iPad5,4"])      return @"iPad Air 2 (Cellular)";
    if ([platform isEqualToString:@"iPad6,3"])      return @"iPad Pro 9.7 inch (WiFi)";
    if ([platform isEqualToString:@"iPad6,4"])      return @"iPad Pro 9.7 inch (Cellular)";
    if ([platform isEqualToString:@"iPad6,7"])      return @"iPad Pro 12.9 inch (WiFi)";
    if ([platform isEqualToString:@"iPad6,8"])      return @"iPad Pro 12.9 inch (Cellular)";
    if ([platform isEqualToString:@"i386"])         return @"Simulator";
    if ([platform isEqualToString:@"x86_64"])       return @"Simulator";

    return platform;
}

The right way to add further configurations to the Spring Boot peconfigured ObjectMapper is to define a Jackson2ObjectMapperBuilderCustomizer. Else you are overwriting Springs configuration, which you do not want to lose.

 @Configuration
public class MyJacksonConfigurer implements Jackson2ObjectMapperBuilderCustomizer {
    @Override
    public void customize(Jackson2ObjectMapperBuilder builder) {
        builder.deserializerByType(LocalDate.class, new MyOwnJsonLocalDateTimeDeserializer());
    }
}

Replace '\n' with "\n". The escape sequence is not recognized when you use '.

See the manual.

For the question of how to write line endings, see the note here. Basically, different operating systems have different conventions for line endings. Windows uses "\r\n", unix based operating systems use "\n". You should stick to one convention (I'd chose "\n") and open your file in binary mode (fopen should get "wb", not "w").

tr td 
{
    border-bottom: 2px solid silver;
}

or if you want the border inside the TR tag, you can do this:

tr td {
    box-shadow: inset 0px -2px 0px silver;
}

Here is my function

char *fileName = "input-1.txt";
countOfLinesFromFile(fileName);

void countOfLinesFromFile(char *filename){
FILE* myfile = fopen(filename, "r");
int ch, number_of_lines = 0;
do
{
    ch = fgetc(myfile);
    if(ch == '\n')
        number_of_lines++;
}
while (ch != EOF);
if(ch != '\n' && number_of_lines != 0)
    number_of_lines++;
fclose(myfile);
printf("number of lines in  %s   = %d",filename, number_of_lines);

}

Use substring

String strOut = "abcdefghijklmnopqrtuvwxyz"
String result = strOut.substring(0, 8) + "...";// count start in 0 and 8 is excluded
System.out.pritnln(result);

Note: substring(int first, int second) takes two parameters. The first is inclusive and the second is exclusive.

I had a problem where it did not allow me to insert it even after setting the IDENTITY_INSERT ON.

The problem was that i did not specify the column names and for some reason it did not like it.

INSERT INTO tbl Values(vals)

So basically do the full INSERT INTO tbl(cols) Values(vals)

It boils down to:

Class<? extends Serializable> c1 = null;
Class<java.util.Date> d1 = null;
c1 = d1; // compiles
d1 = c1; // wont compile - would require cast to Date

You can see the Class reference c1 could contain a Long instance (since the underlying object at a given time could have been List<Long>), but obviously cannot be cast to a Date since there is no guarantee that the "unknown" class was Date. It is not typsesafe, so the compiler disallows it.

However, if we introduce some other object, say List (in your example this object is Matcher), then the following becomes true:

List<Class<? extends Serializable>> l1 = null;
List<Class<java.util.Date>> l2 = null;
l1 = l2; // wont compile
l2 = l1; // wont compile

...However, if the type of the List becomes ? extends T instead of T....

List<? extends Class<? extends Serializable>> l1 = null;
List<? extends Class<java.util.Date>> l2 = null;
l1 = l2; // compiles
l2 = l1; // won't compile

I think by changing Matcher<T> to Matcher<? extends T>, you are basically introducing the scenario similar to assigning l1 = l2;

It's still very confusing having nested wildcards, but hopefully that makes sense as to why it helps to understand generics by looking at how you can assign generic references to each other. It's also further confusing since the compiler is inferring the type of T when you make the function call (you are not explicitly telling it was T is).

How to get rid of a header(first row) and an index(first column).

To write to CSV file:

df = pandas.DataFrame(your_array)
df.to_csv('your_array.csv', header=False, index=False)

To read from CSV file:

df = pandas.read_csv('your_array.csv')
a = df.values

If you want to read a CSV file that doesn't contain a header, pass additional parameter header:

df = pandas.read_csv('your_array.csv', header=None)

Replace

dateTime.setText(app.getTotalDl());

With

dateTime.setText(""+app.getTotalDl());

Because userString is empty. You only declare it

vector<string> userString;     

but never add anything, so the for loop won't even run.

There is and there isn't an expiration date. If you register Visual Studio 2015 Community Edition by successfully signing into Visual Studio then the product is fully unlocked with no set expiry date. If you don't sign in (or haven't entered a purchased licence key), you only have 30 day evaluation license.

You can check whether your copy of Visual Studio has is registered or not by selecting Help -> About Microsoft Studio and clicking on the "License Status" link in the upper right of the About dialog. If your product isn't registered you'll see something like this:

You don't apply a binary mask to an image. You (optionally) use a binary mask in a processing function call to tell the function which pixels of the image you want to process. If I'm completely misinterpreting your question, you should add more detail to clarify.

i have same problem just compress your png file on https://tinypng.com/ online and then try to upload that new compressed png file.

its work for me.

What worked for me on WAMP was modifying file: \Wamp64\alias\phpmyadmin.conf, lines:

 php_admin_value max_execution_time 600
 php_admin_value max_input_time 600

I did not have to change the library file.

Another solution:

<template>
  <div :style="cssProps"></div>
</template>

<script>
  export default {
    data() {
      return {
        cssProps: {
          backgroundImage: `url(${require('@/assets/path/to/your/img.jpg')})`
        }
      }
    }
  }
</script>

What makes this solution more convenient? Firstly, it's cleaner. And then, if you're using Vue CLI (I assume you do), you can load it with webpack.

Note: don't forget that require() is always relative to the current file's path.

1. Wikipedia Article. To me, inversion of control is turning your sequentially written code and turning it into an delegation structure. Instead of your program explicitly controlling everything, your program sets up a class or library with certain functions to be called when certain things happen.

2. It solves code duplication. For example, in the old days you would manually write your own event loop, polling the system libraries for new events. Nowadays, most modern APIs you simply tell the system libraries what events you're interested in, and it will let you know when they happen.

3. Inversion of control is a practical way to reduce code duplication, and if you find yourself copying an entire method and only changing a small piece of the code, you can consider tackling it with inversion of control. Inversion of control is made easy in many languages through the concept of delegates, interfaces, or even raw function pointers.

   It is not appropriate to use in all cases, because the flow of a program can be harder to follow when written this way. It's a useful way to design methods when writing a library that will be reused, but it should be used sparingly in the core of your own program unless it really solves a code duplication problem.

Here is how to use UIVibrancyEffect and UIBlurEffect with UIVisualEffectView

Objective-C:

// Blur effect
UIBlurEffect *blurEffect = [UIBlurEffect effectWithStyle:UIBlurEffectStyleDark];
UIVisualEffectView *blurEffectView = [[UIVisualEffectView alloc] initWithEffect:blurEffect];
[blurEffectView setFrame:self.view.bounds];
[self.view addSubview:blurEffectView];

// Vibrancy effect
UIVibrancyEffect *vibrancyEffect = [UIVibrancyEffect effectForBlurEffect:blurEffect];
UIVisualEffectView *vibrancyEffectView = [[UIVisualEffectView alloc] initWithEffect:vibrancyEffect];
[vibrancyEffectView setFrame:self.view.bounds];

// Label for vibrant text
UILabel *vibrantLabel = [[UILabel alloc] init];
[vibrantLabel setText:@"Vibrant"];
[vibrantLabel setFont:[UIFont systemFontOfSize:72.0f]];
[vibrantLabel sizeToFit];
[vibrantLabel setCenter: self.view.center];

// Add label to the vibrancy view
[[vibrancyEffectView contentView] addSubview:vibrantLabel];

// Add the vibrancy view to the blur view
[[blurEffectView contentView] addSubview:vibrancyEffectView];

Swift 4:

    // Blur Effect
    let blurEffect = UIBlurEffect(style: UIBlurEffectStyle.dark)
    let blurEffectView = UIVisualEffectView(effect: blurEffect)
    blurEffectView.frame = view.bounds
    view.addSubview(blurEffectView)

    // Vibrancy Effect
    let vibrancyEffect = UIVibrancyEffect(blurEffect: blurEffect)
    let vibrancyEffectView = UIVisualEffectView(effect: vibrancyEffect)
    vibrancyEffectView.frame = view.bounds

    // Label for vibrant text
    let vibrantLabel = UILabel()
    vibrantLabel.text = "Vibrant"
    vibrantLabel.font = UIFont.systemFont(ofSize: 72.0)
    vibrantLabel.sizeToFit()
    vibrantLabel.center = view.center

    // Add label to the vibrancy view
    vibrancyEffectView.contentView.addSubview(vibrantLabel)

    // Add the vibrancy view to the blur view
    blurEffectView.contentView.addSubview(vibrancyEffectView)

If you really need True or False, just use bool

>>> bool(re.search("hi", "abcdefghijkl"))
True
>>> bool(re.search("hi", "abcdefgijkl"))
False

As other answers have pointed out, if you are just using it as a condition for an if or while, you can use it directly without wrapping in bool()

DataGridView.CurrentRow.Cells[n]

See: http://msdn.microsoft.com/en-us/library/system.windows.forms.datagridview.currentrow.aspx

You shouldn't have to care that much. RFC 3339, according to itself, is a set of standards derived from ISO 8601. There's quite a few minute differences though, and they're all outlined in RFC 3339. I could go through them all here, but you'd probably do better just reading the document for yourself in the event you're worried:

http://tools.ietf.org/html/rfc3339

You simply combine the ideas of a link to another page, as with href=foo.html, and a link to an element on the same page, as with href=#bar, so that the fragment like #bar is written immediately after the URL that refers to another page:

<a href="foo.html#bar">Some nice link text</a>

The target is specified the same was as when linking inside one page, e.g.

<div id="bar">
<h2>Some heading</h2>
Some content
</div>

or (if you really want to link specifically to a heading only)

<h2 id="bar">Some heading</h2>

Since state isn't tightly coupled with component instance in functional components, previous state cannot be reached in useEffect without saving it first, for instance, with useRef. This also means that state update was possibly incorrectly implemented in wrong place because previous state is available inside setState updater function.

This is a good use case for useReducer which provides Redux-like store and allows to implement respective pattern. State updates are performed explicitly, so there's no need to figure out which state property is updated; this is already clear from dispatched action.

Here's an example what it may look like:

function reducer({ sendAmount, receiveAmount, rate }, action) {
  switch (action.type) {
    case "sendAmount":
      sendAmount = action.payload;
      return {
        sendAmount,
        receiveAmount: sendAmount * rate,
        rate
      };
    case "receiveAmount":
      receiveAmount = action.payload;
      return {
        sendAmount: receiveAmount / rate,
        receiveAmount,
        rate
      };
    case "rate":
      rate = action.payload;
      return {
        sendAmount: receiveAmount ? receiveAmount / rate : sendAmount,
        receiveAmount: sendAmount ? sendAmount * rate : receiveAmount,
        rate
      };
    default:
      throw new Error();
  }
}

function handleChange(e) {
  const { name, value } = e.target;
  dispatch({
    type: name,
    payload: value
  });
}

...
const [state, dispatch] = useReducer(reducer, {
  rate: 2,
  sendAmount: 0,
  receiveAmount: 0
});
...

So, $HOME is what I need to modify. However I have been unable to find where this mythical $HOME variable is set so I assumed it was a Linux system version of PATH or something. Anyway...**

Answer

Adding HOME at the top of the profile file worked.

HOME="c://path/to/custom/root/".

  #THE FIX WAS ADDING THE FOLLOWING LINE TO THE TOP OF THE PROFILE FILE

  HOME="c://path/to/custom/root/"

  # below are the original contents ===========
  # To the extent possible under law, ..blah blah

  # Some resources...
  # Customizing Your Shell: http://www.dsl.org/cookbook/cookbook_5.html#SEC69
  # Consistent BackSpace and Delete Configuration:
  #   http://www.ibb.net/~anne/keyboard.html
  # The Linux Documentation Project: http://www.tldp.org/
  # The Linux Cookbook: http://www.tldp.org/LDP/linuxcookbook/html/
  # Greg's Wiki http://mywiki.wooledge.org/

  # Setup some default paths. Note that this order will allow user installed
  # software to override 'system' software.
  # Modifying these default path settings can be done in different ways.
  # To learn more about startup files, refer to your shell's man page.

  MSYS2_PATH="/usr/local/bin:/usr/bin:/bin"
  MANPATH="/usr/local/man:/usr/share/man:/usr/man:/share/man:${MANPATH}"
  INFOPATH="/usr/local/info:/usr/share/info:/usr/info:/share/info:${INFOPATH}"
  MINGW_MOUNT_POINT=
  if [ -n "$MSYSTEM" ]
  then
    case "$MSYSTEM" in
      MINGW32)
        MINGW_MOUNT_POINT=/mingw32
        PATH="${MINGW_MOUNT_POINT}/bin:${MSYS2_PATH}:${PATH}"
        PKG_CONFIG_PATH="${MINGW_MOUNT_POINT}/lib/pkgconfig:${MINGW_MOUNT_POINT}/share/pkgconfig"
        ACLOCAL_PATH="${MINGW_MOUNT_POINT}/share/aclocal:/usr/share/aclocal"
        MANPATH="${MINGW_MOUNT_POINT}/share/man:${MANPATH}"
      ;;
      MINGW64)
        MINGW_MOUNT_POINT=/mingw64
        PATH="${MINGW_MOUNT_POINT}/bin:${MSYS2_PATH}:${PATH}"
        PKG_CONFIG_PATH="${MINGW_MOUNT_POINT}/lib/pkgconfig:${MINGW_MOUNT_POINT}/share/pkgconfig"
        ACLOCAL_PATH="${MINGW_MOUNT_POINT}/share/aclocal:/usr/share/aclocal"
        MANPATH="${MINGW_MOUNT_POINT}/share/man:${MANPATH}"
      ;;
      MSYS)
        PATH="${MSYS2_PATH}:/opt/bin:${PATH}"
        PKG_CONFIG_PATH="/usr/lib/pkgconfig:/usr/share/pkgconfig:/lib/pkgconfig"
      ;;
      *)
        PATH="${MSYS2_PATH}:${PATH}"
      ;;
    esac
  else
    PATH="${MSYS2_PATH}:${PATH}"
  fi

  MAYBE_FIRST_START=false
  SYSCONFDIR="${SYSCONFDIR:=/etc}"

  # TMP and TEMP as defined in the Windows environment must be kept
  # for windows apps, even if started from msys2. However, leaving
  # them set to the default Windows temporary directory or unset
  # can have unexpected consequences for msys2 apps, so we define
  # our own to match GNU/Linux behaviour.
  ORIGINAL_TMP=$TMP
  ORIGINAL_TEMP=$TEMP
  #unset TMP TEMP
  #tmp=$(cygpath -w "$ORIGINAL_TMP" 2> /dev/null)
  #temp=$(cygpath -w "$ORIGINAL_TEMP" 2> /dev/null)
  #TMP="/tmp"
  #TEMP="/tmp"
  case "$TMP" in *\\*) TMP="$(cygpath -m "$TMP")";; esac
  case "$TEMP" in *\\*) TEMP="$(cygpath -m "$TEMP")";; esac
  test -d "$TMPDIR" || test ! -d "$TMP" || {
    TMPDIR="$TMP"
    export TMPDIR
  }


  # Define default printer
  p='/proc/registry/HKEY_CURRENT_USER/Software/Microsoft/Windows NT/CurrentVersion/Windows/Device'
  if [ -e "${p}" ] ; then
    read -r PRINTER < "${p}"
    PRINTER=${PRINTER%%,*}
  fi
  unset p

  print_flags ()
  {
    (( $1 & 0x0002 )) && echo -n "binary" || echo -n "text"
    (( $1 & 0x0010 )) && echo -n ",exec"
    (( $1 & 0x0040 )) && echo -n ",cygexec"
    (( $1 & 0x0100 )) && echo -n ",notexec"
  }

  # Shell dependent settings
  profile_d ()
  {
    local file=
    for file in $(export LC_COLLATE=C; echo /etc/profile.d/*.$1); do
      [ -e "${file}" ] && . "${file}"
    done

    if [ -n ${MINGW_MOUNT_POINT} ]; then
      for file in $(export LC_COLLATE=C; echo ${MINGW_MOUNT_POINT}/etc/profile.d/*.$1); do
        [ -e "${file}" ] && . "${file}"
      done
    fi
  }

  for postinst in $(export LC_COLLATE=C; echo /etc/post-install/*.post); do
    [ -e "${postinst}" ] && . "${postinst}"
  done

  if [ ! "x${BASH_VERSION}" = "x" ]; then
    HOSTNAME="$(/usr/bin/hostname)"
    profile_d sh
    [ -f "/etc/bash.bashrc" ] && . "/etc/bash.bashrc"
  elif [ ! "x${KSH_VERSION}" = "x" ]; then
    typeset -l HOSTNAME="$(/usr/bin/hostname)"
    profile_d sh
    PS1=$(print '\033]0;${PWD}\n\033[32m${USER}@${HOSTNAME} \033[33m${PWD/${HOME}/~}\033[0m\n$ ')
  elif [ ! "x${ZSH_VERSION}" = "x" ]; then
    HOSTNAME="$(/usr/bin/hostname)"
    profile_d zsh
    PS1='(%n@%m)[%h] %~ %% '
  elif [ ! "x${POSH_VERSION}" = "x" ]; then
    HOSTNAME="$(/usr/bin/hostname)"
    PS1="$ "
  else
    HOSTNAME="$(/usr/bin/hostname)"
    profile_d sh
    PS1="$ "
  fi

  if [ -n "$ACLOCAL_PATH" ]
  then
    export ACLOCAL_PATH
  fi

  export PATH MANPATH INFOPATH PKG_CONFIG_PATH USER TMP TEMP PRINTER HOSTNAME PS1 SHELL tmp temp
  test -n "$TERM" || export TERM=xterm-256color

  if [ "$MAYBE_FIRST_START" = "true" ]; then
    sh /usr/bin/regen-info.sh

    if [ -f "/usr/bin/update-ca-trust" ]
    then
      sh /usr/bin/update-ca-trust
    fi

    clear
    echo
    echo
    echo "###################################################################"
    echo "#                                                                 #"
    echo "#                                                                 #"
    echo "#                   C   A   U   T   I   O   N                     #"
    echo "#                                                                 #"
    echo "#                  This is first start of MSYS2.                  #"
    echo "#       You MUST restart shell to apply necessary actions.        #"
    echo "#                                                                 #"
    echo "#                                                                 #"
    echo "###################################################################"
    echo
    echo
  fi
  unset MAYBE_FIRST_START

Alexander Abakumov's answer is the correct one. It solved every binding issue I had updating the underlying data and having the grid update.

Its easy to implement and modify any existing source code you have.

grdDetails.DataSource = new System.Windows.Forms.BindingSource { DataSource = OrderDetails };

versions:update-child-modules sounds like what you're looking for. You could do versions:set as mentioned, but this is a light-weight way to update the parent version numbers. For the child modules, it's my opinion that you should remove the <version> definitions, since they will inherit the parent module's version number.

I had the same issue, the following commands can resolve:

sudo yum install  glibc-common glibc  (mutual dependency)
sudo yum install  glibc.i686  (the missing version)

time = "2017-01-18T17:02:09.000+05:30"

t = new Date(time)

hr = ("0" + t.getHours()).slice(-2);
min = ("0" + t.getMinutes()).slice(-2);
sec = ("0" + t.getSeconds()).slice(-2);

t.getFullYear()+"-"+t.getMonth()+1+"-"+t.getDate()+" "+hr+":"+min+":"+sec

This is what I did for bulk update:

UPDATE tableName SET isDeleted = 1 where columnName in ('430903GW4j683537882','430903GW4j667075431','430903GW4j658444015')

You're probably looking for the meta refresh tag:

<html>
    <head>
        <meta http-equiv="refresh" content="3;url=http://www.somewhere.com/" />
    </head>
    <body>
        <h1>Redirecting in 3 seconds...</h1>
    </body>
</html>

Note that use of meta refresh is deprecated and frowned upon these days, but sometimes it's the only viable option (for example, if you're unable to do server-side generation of HTTP redirect headers and/or you need to support non-JavaScript clients etc).

Let me explain a bit by bit.

0,1,2

0: standard input
1: standard output
2: standard error

>>

>> in command >> /dev/null 2>&1 appends the command output to /dev/null.

command >> /dev/null 2>&1

1. After command:

command
=> 1 output on the terminal screen
=> 2 output on the terminal screen

2. After redirect:

command >> /dev/null
=> 1 output to /dev/null
=> 2 output on the terminal screen

3. After /dev/null 2>&1

command >> /dev/null 2>&1
=> 1 output to /dev/null
=> 2 output is redirected to 1 which is now to /dev/null

For Xcode 8 you gotta download a package named Additional Tools for Xcode 8

For other versions (8.1, 8.2) get the package here

Double click and open the dmg and go to Hardware directory. Double click on Network Link Conditioner.prefPane.

Click on install

Now Network Link Conditioner will be available in System Preferences.

For versions older than Xcode 8, the package to be downloaded is called Hardware IO Tools for Xcode. Get it from this page

Make an equals check on the keySet() of both HashMaps.

NOTE:

If your Map contains String keys then it is no problem, but if your Map contains objA type keys then you need to make sure that your class objA implements equals().

http://www.internetdoc.info/javascript-function/remove-key-from-array.htm

removeKey(arrayName,key);

function removeKey(arrayName,key)
{
 var x;
 var tmpArray = new Array();
 for(x in arrayName)
 {
  if(x!=key) { tmpArray[x] = arrayName[x]; }
 }
 return tmpArray;
}

Put your class name on the mat-form-field element. This works for all inputs.

Error: java.lang.NoSuchMethodError: javax.persistence.JoinTable.indexes()[Ljavax/persistence/Index;

The only thing that solved my problem was removing the following dependency in pom.xml: <dependency> <groupId>org.hibernate.javax.persistence</groupId> <artifactId>hibernate-jpa-2.1-api</artifactId> <version>1.0.0.Final</version> </dependency>

And replace it for:

<dependency>
  <groupId>javax.persistence</groupId>
  <artifactId>persistence-api</artifactId>
  <version>1.0.2</version>
</dependency>

Hope it helps someone.

This works for me. Returns the number that Excel displays in the bottom status line when a pivot column is filtered and I need the count of the visible cells.

Global Const DashBoardSheet = "DashBoard"
Global Const ProfileColRng = "$L:$L"
.
.
.
Sub MySub()
Dim myreccnt as long
.
.
.
myreccnt = GetFilteredPivotRowCount(DashBoardSheet, ProfileColRng)
.
.
.
End Sub

Function GetFilteredPivotRowCount(sheetname As String, cntrange As String) As long

Dim reccnt As Long

reccnt = Sheets(sheetname).Range(cntrange).SpecialCells(xlCellTypeVisible).SpecialCells(xlCellTypeConstants).Count - 1

GetFilteredPivotRowCount = reccnt

End Function

Just Reinstall JDK 1.7 it will work.

You can use the python-n2w library, Just do

pip install n2w

then simply

print(n2w.convert(your-number-here))

val() returns the value of the <select> element, i.e. the value attribute of the selected <option> element.

Since you actually want the inner text of the selected <option> element, you should match that element and use text() instead:

var nationality = $("#dancerCountry option:selected").text();

command.Text = "UPDATE Student 
  SET Address = @add, City = @cit
  Where FirstName = @fn and LastName = @add";

This is not a solution to the complete problem but oracle has good detailed documentation on how to use this keytool. This explains how to

1. use keytool.
2. generate certs/self signed certs using keytool.
3. import generated certs to java clients.

https://docs.oracle.com/cd/E54932_01/doc.705/e54936/cssg_create_ssl_cert.htm#CSVSG178

If you were programming in C, then assuming name really is a fixed-length array like you say, you have to do something like the following:

char filename[sizeof(name) + 4];
strcpy (filename, name) ;
strcat (filename, ".txt") ;
FILE* fp = fopen (filename,...

You see now why everybody recommends std::string?

For Word 2010 and 2013, go to File > Options > Customize Ribbon > Keyboard Shortcuts > All Commands (in left list) > Color: (in right list) -- at this point, you type in the short cut (such as Alt+r) and select the color (such as red). (This actually goes back to 2003 but I don't have that installed to provide the pathway.)

I think you can go with 3 steps:

git clone
git submodule init
git submodule update

You can use the bind function to set the context of this within a function.

function myFunc() {
  console.log(this.str)
}
const myContext = {str: "my context"}
const boundFunc = myFunc.bind(myContext);
boundFunc(); // "my context"

ssize_t is not included in the standard and isn't portable. size_t should be used when handling the size of objects (there's ptrdiff_t too, for pointer differences).

Variable interpolation does not happen in single quotes. You need to use double quotes as:

$i = 1
echo "<p class=\"paragraph$i\"></p>";
++i;

I understand you want to display using HTMl but you can also open the PDF file using php by pointing out the path and the browser will render it in a few simple steps

<?php
$your_file_name = "url_here";

//Content type and this case its a PDF
header("Content-type: application/pdf");

header("Content-Length: " . filesize($your_file_name )); 

//Display the file
readfile($your_file_name );
?>

Your usage of now() is correct. However, you need to use one type of quotes around the entire query and another around the values.

You can modify your query to use double quotes at the beginning and end, and single quotes around $somename:

$update_query = "UPDATE db.tablename SET insert_time=now() WHERE username='$somename'";

Public Sub LinqToSqlJoin07()
Dim q = From e In db.Employees _
        Group Join o In db.Orders On e Equals o.Employee Into ords = Group _
        From o In ords.DefaultIfEmpty _
        Select New With {e.FirstName, e.LastName, .Order = o}

ObjectDumper.Write(q) End Sub

Check http://msdn.microsoft.com/en-us/vbasic/bb737929.aspx

SI = Source Index
DI = Destination Index

As others have indicated, they have special uses with the string instructions. For real mode programming, the ES segment register must be used with DI and DS with SI as in

movsb  es:di, ds:si

SI and DI can also be used as general purpose index registers. For example, the C source code

srcp [srcidx++] = argv [j];

compiles into

8B550C         mov    edx,[ebp+0C]
8B0C9A         mov    ecx,[edx+4*ebx]
894CBDAC       mov    [ebp+4*edi-54],ecx
47             inc    edi

where ebp+12 contains argv, ebx is j, and edi has srcidx. Notice the third instruction uses edi mulitplied by 4 and adds ebp offset by 0x54 (the location of srcp); brackets around the address indicate indirection.

AX = accumulator
DX = double word accumulator
CX = counter
BX = base register

They look like general purpose registers, but there are a number of instructions which (unexpectedly?) use one of them—but which one?—implicitly.

1. Go in Github an create a repo for your new code.
2. Use the new https or ssh url in Eclise when you are doing the push to upstream;

Just to add to answers above, you can streamline the use of express-fileupload to just a single route that needs it, instead of adding it to the every route.

let fileupload = require("express-fileupload");

...

app.post("/upload", fileupload, function(req, res){

...

});

While maybe not the most efficient, this would work:

declare @StartDate datetime, @EndDate datetime

select @StartDate = '10/01/2012 08:40:18.000',@EndDate='10/04/2012 09:52:48.000'

select convert(varchar(5),DateDiff(s, @startDate, @EndDate)/3600)+':'+convert(varchar(5),DateDiff(s, @startDate, @EndDate)%3600/60)+':'+convert(varchar(5),(DateDiff(s, @startDate, @EndDate)%60))

if you can run two selects then this would be better because you only do the datediff once:

declare @StartDate datetime, @EndDate datetime

select @StartDate = '10/01/2012 08:40:18.000',@EndDate='10/04/2012 09:52:48.000'
declare @Sec BIGINT

select @Sec = DateDiff(s, @startDate, @EndDate)

select convert(varchar(5),@sec/3600)+':'+convert(varchar(5),@sec%3600/60)+':'+convert(varchar(5),(@sec%60))

Short answer: using as.data.frame.matrix(mytable), as @Victor Van Hee suggested.

Long answer: as.data.frame(mytable) may not work on contingency tables generated by table() function, even if is.matrix(your_table) returns TRUE. It will still melt you table into the factor1 factor2 factori counts format.

Example:

> freq_t = table(cyl = mtcars$cyl, gear = mtcars$gear)

> freq_t
   gear
cyl  3  4  5
  4  1  8  2
  6  2  4  1
  8 12  0  2

> is.matrix(freq_t)
[1] TRUE

> as.data.frame(freq_t)
  cyl gear Freq
1   4    3    1
2   6    3    2
3   8    3   12
4   4    4    8
5   6    4    4
6   8    4    0
7   4    5    2
8   6    5    1
9   8    5    2
> as.data.frame.matrix(freq_t)
   3 4 5
4  1 8 2
6  2 4 1
8 12 0 2

Python3:

import importlib.machinery

loader = importlib.machinery.SourceFileLoader('report', '/full/path/report/other_py_file.py')
handle = loader.load_module('report')

handle.mainFunction(parameter)

This method can be used to import whichever way you want in a folder structure (backwards, forwards doesn't really matter, i use absolute paths just to be sure).

There's also the more normal way of importing a python module in Python3,

import importlib
module = importlib.load_module('folder.filename')
module.function()

Kudos to Sebastian for spplying a similar answer for Python2:

import imp

foo = imp.load_source('module.name', '/path/to/file.py')
foo.MyClass()

You can use Get-Member

if(Get-Member -inputobject $var -name "Property" -Membertype Properties){
#Property exists
}