You can enable SSL on XAMPP by creating self signed certificates and then installing those certificates. Type the below commands to generate and move the certificates to ssl folders.

openssl genrsa -des3 -out server.key 1024

openssl req -new -key server.key -out server.csr

cp server.key server.key.org

openssl rsa -in server.key.org -out server.key

openssl x509 -req -days 365 -in server.csr -signkey server.key -out server.crt

cp server.crt /opt/lampp/etc/ssl.crt/domainname.crt

cp server.key /opt/lampp/etc/ssl.key/domainname.key

(Use sudo with each command if you are not the super user)

Now, Check that mod_ssl is enabled in [XAMPP_HOME]/etc/httpd.conf:

LoadModule ssl_module modules/mod_ssl.so

Add a virtual host, in this example "localhost.domainname.com" by editing [XAMPP_HOME]/etc/extra/httpd-ssl.conf as follows:

<virtualhost 127.0.1.4:443>
    ServerName localhost.domainname.com
    ServerAlias localhost.domainname.com *.localhost.domainname.com
    ServerAdmin admin@localhost

    DocumentRoot "/opt/lampp/htdocs/"

    DirectoryIndex index.php

    ErrorLog /opt/lampp/logs/domainname.local.error.log
    CustomLog /opt/lampp/logs/domainname.local.access.log combined

    SSLEngine on
    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    SSLCertificateFile /opt/lampp/etc/ssl.crt/domainname.crt
    SSLCertificateKeyFile /opt/lampp/etc/ssl.key/domainname.key

    <directory /opt/lampp/htdocs/>
            Options Indexes FollowSymLinks
            AllowOverride All
            Order allow,deny
            Allow from all
    </directory>
    BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
</virtualhost>

Add the following entry to /etc/hosts:

127.0.1.4 localhost.domainname.com

Now, try installing the certificate/ try importing certificate to browser. I have checked this and this worked on Ubuntu.

I do this simply by passing the user credentials to ldap_bind().

http://php.net/manual/en/function.ldap-bind.php

If the account can bind to LDAP, it's valid; if it can't, it's not. If all you're doing is authentication (not account management), I don't see the need for a library.

This is similar to mmm's solution, but a bit more understandable. Have your tasks extend an abstract class that wraps the run() method.

public abstract Task implements Runnable {

    public abstract void execute();

    public void run() {
      try {
        execute();
      } catch (Throwable t) {
        // handle it  
      }
    }
}


public MySampleTask extends Task {
    public void execute() {
        // heavy, error-prone code here
    }
}

If you have just a few columns to sum, you can write:

df['e'] = df['a'] + df['b'] + df['d']

This creates new column e with the values:

   a  b   c  d   e
0  1  2  dd  5   8
1  2  3  ee  9  14
2  3  4  ff  1   8

For longer lists of columns, EdChum's answer is preferred.

Enumerate the subkeys of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP. Each subkey is a .NET version. It should have Install=1 value if it's present on the machine, an SP value that shows the service pack and an MSI=1 value if it was installed using an MSI. (.NET 2.0 on Windows Vista doesn't have the last one for example, as it is part of the OS.)

Use Object.keys() or shim it in older browsers...

const keys = Object.keys(driversCounter);

If you wanted values, there is Object.values() and if you want key and value, you can use Object.entries(), often paired with Array.prototype.forEach() like this...

Object.entries(driversCounter).forEach(([key, value]) => {
   console.log(key, value);
});

Alternatively, considering your use case, maybe this will do it...

var selectBox, option, prop;

selectBox = document.getElementById("drivers");

for (prop in driversCounter) {
   option = document.createElement("option");
   option.textContent = prop;
   option.value = driversCounter[prop];
   selectBox.add(option);
}

Will it warn you if you pass a 32-bit unsigned integer to a %lu format? It should be fine since the conversion is well-defined and doesn't lose any information.

I've heard that some platforms define macros in <inttypes.h> that you can insert into the format string literal but I don't see that header on my Windows C++ compiler, which implies it may not be cross-platform.

I know this is an old question but it does not yet appear to have an answer. I've duplicated this situation, but I'm writing the server app, so I've been able to establish what happens on the server side as well. The client sends the certificate when the server asks for it and if it has a reference to a real certificate in the s_client command line. My server application is set up to ask for a client certificate and to fail if one is not presented. Here is the command line I issue:

Yourhostname here -vvvvvvvvvv s_client -connect <hostname>:443 -cert client.pem -key cckey.pem -CAfile rootcert.pem -cipher ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH -tls1 -state

When I leave out the "-cert client.pem" part of the command the handshake fails on the server side and the s_client command fails with an error reported. I still get the report "No client certificate CA names sent" but I think that has been answered here above.

The short answer then is that the server determines whether a certificate will be sent by the client under normal operating conditions (s_client is not normal) and the failure is due to the server not recognizing the CA in the certificate presented. I'm not familiar with many situations in which two-way authentication is done although it is required for my project.

You are clearly sending a certificate. The server is clearly rejecting it.

The missing information here is the exact manner in which the certs were created and the way in which the provider loaded the cert, but that is probably all wrapped up by now.

"%f" is the (or at least one) correct format for a double. There is no format for a float, because if you attempt to pass a float to printf, it'll be promoted to double before printf receives it¹. "%lf" is also acceptable under the current standard -- the l is specified as having no effect if followed by the f conversion specifier (among others).

Note that this is one place that printf format strings differ substantially from scanf (and fscanf, etc.) format strings. For output, you're passing a value, which will be promoted from float to double when passed as a variadic parameter. For input you're passing a pointer, which is not promoted, so you have to tell scanf whether you want to read a float or a double, so for scanf, %f means you want to read a float and %lf means you want to read a double (and, for what it's worth, for a long double, you use %Lf for either printf or scanf).

_{1. C99, §6.5.2.2/6: "If the expression that denotes the called function has a type that does not include a prototype, the integer promotions are performed on each argument, and arguments that have type float are promoted to double. These are called the default argument promotions." In C++ the wording is somewhat different (e.g., it doesn't use the word "prototype") but the effect is the same: all the variadic parameters undergo default promotions before they're received by the function.}

In C, static has two meanings, depending on scope of its use. In the global scope, when an object is declared at the file level, it means that that object is only visible within that file.

At any other scope it declares an object that will retain its value between the different times that the particular scope is entered. For example, if an int is delcared within a procedure:

void procedure(void)
{
   static int i = 0;

   i++;
}

the value of 'i' is initialized to zero on the first call to the procedure, and the value is retained each subsequent time the procedure is called. if 'i' were printed it would output a sequence of 0, 1, 2, 3, ...

The following is what this would look like inside of .draggable({});

$("#yourDraggable").draggable({
    revert: "invalid" ,
    start: function(){ 
        $(this).css("opacity",0.3);
    },
    stop: function(){ 
        $(this).draggable( 'disable' )
    },
    opacity: 0.7,
    helper: function () { 
        $copy = $(this).clone(); 
        $copy.css({
            "list-style":"none",
            "width":$(this).outerWidth()
        }); 
        return $copy; 
    },
    appendTo: 'body',
    scroll: false
});

select to_date(substr(sysdate,1, 4) || '01/01'), to_date(substr(sysdate,1, 4) || '12/31') 
from dual

The sshpass utility is meant for exactly this. First, install sshpass by typing this command:

sudo apt-get install sshpass

Then prepend your ssh/scp command with

sshpass -p '<password>' <ssh/scp command>

This program is easiest to install when using Linux.

User should consider using SSH's more secure public key authentication (with the ssh command) instead.

I prefer using regex like this:

NSString *myString = @"this is a test";
NSString *myNewString = [myString stringByReplacingOccurrencesOfString:@"\\s"
                                     withString:@""
                                        options:NSRegularExpressionSearch
                                          range:NSMakeRange(0, [myStringlength])];
 //myNewString will be @"thisisatest"

You can make yourself a category on NSString to make life even easier:

- (NSString *) removeAllWhitespace
{
    return [self stringByReplacingOccurrencesOfString:@"\\s" withString:@""
                                              options:NSRegularExpressionSearch
                                                range:NSMakeRange(0, [self length])];

}

Here is a unit test method on it too:

- (void) testRemoveAllWhitespace
{
    NSString *testResult = nil;

    NSArray *testStringsArray        = @[@""
                                         ,@"    "
                                         ,@"  basicTest    "
                                         ,@"  another Test \n"
                                         ,@"a b c d e f g"
                                         ,@"\n\tA\t\t \t \nB    \f  C \t  ,d,\ve   F\r\r\r"
                                         ,@"  landscape, portrait,     ,,,up_side-down   ;asdf;  lkjfasdf0qi4jr0213 ua;;;;af!@@##$$ %^^ & *  * ()+  +   "
                                         ];

    NSArray *expectedResultsArray   = @[@""
                                        ,@""
                                        ,@"basicTest"
                                        ,@"anotherTest"
                                        ,@"abcdefg"
                                        ,@"ABC,d,eF"
                                        ,@"landscape,portrait,,,,up_side-down;asdf;lkjfasdf0qi4jr0213ua;;;;af!@@##$$%^^&**()++"
                                        ];

    for (int i=0; i < [testStringsArray count]; i++)
    {
        testResult = [testStringsArray[i] removeAllWhitespace];
        STAssertTrue([testResult isEqualToString:expectedResultsArray[i]], @"Expected: \"%@\" to become: \"%@\", but result was \"%@\"",
                     testStringsArray[i], expectedResultsArray[i], testResult);
    }
}

So, whatever adding splice method to a String prototype cant work transparent to spec...

Let's do some one extend it:

String.prototype.splice = function(...a){
    for(var r = '', p = 0, i = 1; i < a.length; i+=3)
        r+= this.slice(p, p=a[i-1]) + (a[i+1]||'') + this.slice(p+a[i], p=a[i+2]||this.length);
    return r;
}

• Every 3 args group "inserting" in splice style.
• Special if there is more then one 3 args group, the end off each cut will be the start of next.
  • '0123456789'.splice(4,1,'fourth',8,1,'eighth'); //return '0123fourth567eighth9'
• You can drop or zeroing the last arg in each group (that treated as "nothing to insert")
  • '0123456789'.splice(-4,2); //return '0123459'
• You can drop all except 1st arg in last group (that treated as "cut all after 1st arg position")
  • '0123456789'.splice(0,2,null,3,1,null,5,2,'/',8); //return '24/7'
• if You pass multiple, you MUST check the sort of the positions left-to-right order by youreself!
• And if you dont want you MUST DO NOT use it like this:
  • '0123456789'.splice(4,-3,'what?'); //return "0123what?123456789"

You can use SQLiteOpenHelper's onUpgrade method. In the onUpgrade method, you get the oldVersion as one of the parameters.

In the onUpgrade use a switch and in each of the cases use the version number to keep track of the current version of database.

It's best that you loop over from oldVersion to newVersion, incrementing version by 1 at a time and then upgrade the database step by step. This is very helpful when someone with database version 1 upgrades the app after a long time, to a version using database version 7 and the app starts crashing because of certain incompatible changes.

Then the updates in the database will be done step-wise, covering all possible cases, i.e. incorporating the changes in the database done for each new version and thereby preventing your application from crashing.

For example:

public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) {
    switch (oldVersion) {
    case 1:
        String sql = "ALTER TABLE " + TABLE_SECRET + " ADD COLUMN " + "name_of_column_to_be_added" + " INTEGER";
        db.execSQL(sql);
        break;

    case 2:
        String sql = "SOME_QUERY";
        db.execSQL(sql);
        break;
    }

}

Use dir() to find out if the module has a __version__ attribute at all.

>>> import selenium
>>> dir(selenium)
['__builtins__', '__doc__', '__file__', '__name__',
 '__package__', '__path__', '__version__']
>>> selenium.__version__
'3.141.0'
>>> selenium.__path__
['/venv/local/lib/python2.7/site-packages/selenium']

the _T convention is used to indicate the program should use the character set defined for the application (Unicode, ASCII, MBCS, etc.). You can surround your strings with _T( ) to have them stored in the correct format.

 cout << _T( "There are " ) << argc << _T( " arguments:" ) << endl;

Edit: (after the code change)
There is no way for us to tell you whether you need or not to call your parent's __init__ (or any other function). Inheritance obviously would work without such call. It all depends on the logic of your code: for example, if all your __init__ is done in parent class, you can just skip child-class __init__ altogether.

consider the following example:

>>> class A:
    def __init__(self, val):
        self.a = val


>>> class B(A):
    pass

>>> class C(A):
    def __init__(self, val):
        A.__init__(self, val)
        self.a += val


>>> A(4).a
4
>>> B(5).a
5
>>> C(6).a
12

In Eclipse it is very easy to point Tomcat to a new JVM (in this example JRE6). My problem was I couldn't find where to do it. Here is the trick:

1. On the ECLIPSE top menu FILE pull down tab, select NEW, -->Other
2. ...on the New Server: Select A Wizard window, select: Server-> Server... click NEXT
3. . on the New Server: Define a New Server window, select Apache> Tomcat 7 Server
4. ..now click the line in blue and underlined entitled: Configure Runtime Environments
5. on the Server Runtime Environments window,
6. ..select Apache, expand it(click on the arrow to the left), select TOMCAT v7.0, and click EDIT.
7. you will see a window called EDIT SERVER RUNTIME ENVIRONMENT: TOMCAT SERVER
8. On this screen there is a pulldown labeled JREs.
9. You should find your JRE listed like JRE1.6.0.33. If not use the Installed JRE button.
10. Select the desired JRE. Click the FINISH button.
11. Gracefully exit, in the Server: Server Runtime Environments window, click OK
12. in the New Server: Define a new Server window, hit NEXT
13. in the New Server: Add and Remove Window, select apps and install them on the server.
14. in the New Server: Add and Remove Window, click Finish

That's all. Interesting, only steps 7-10 seem to matter, and they will change the JRE used on all servers you have previously defined to use TOMCAT v7.0. The rest of the steps are just because I can't find any other way to get to the screen except by defining a new server. Does anyone else know an easier way?

tl;dr:

• commit() writes the data synchronously (blocking the thread its called from). It then informs you about the success of the operation.
• apply() schedules the data to be written asynchronously. It does not inform you about the success of the operation.
• If you save with apply() and immediately read via any getX-method, the new value will be returned!
• If you called apply() at some point and it's still executing, any calls to commit() will block until all past apply-calls and the current commit-call are finished.

More in-depth information from the SharedPreferences.Editor Documentation:

Unlike commit(), which writes its preferences out to persistent storage synchronously, apply() commits its changes to the in-memory SharedPreferences immediately but starts an asynchronous commit to disk and you won't be notified of any failures. If another editor on this SharedPreferences does a regular commit() while a apply() is still outstanding, the commit() will block until all async commits are completed as well as the commit itself.

As SharedPreferences instances are singletons within a process, it's safe to replace any instance of commit() with apply() if you were already ignoring the return value.

The SharedPreferences.Editor interface isn't expected to be implemented directly. However, if you previously did implement it and are now getting errors about missing apply(), you can simply call commit() from apply().

TryGetValue will already assign the default value for the type to the dictionary, so you can just use:

dictionary.TryGetValue(key, out value);

and just ignore the return value. However, that really will just return default(TValue), not some custom default value (nor, more usefully, the result of executing a delegate). There's nothing more powerful built into the framework. I would suggest two extension methods:

public static TValue GetValueOrDefault<TKey, TValue>
    (this IDictionary<TKey, TValue> dictionary, 
     TKey key,
     TValue defaultValue)
{
    TValue value;
    return dictionary.TryGetValue(key, out value) ? value : defaultValue;
}

public static TValue GetValueOrDefault<TKey, TValue>
    (this IDictionary<TKey, TValue> dictionary,
     TKey key,
     Func<TValue> defaultValueProvider)
{
    TValue value;
    return dictionary.TryGetValue(key, out value) ? value
         : defaultValueProvider();
}

(You may want to put argument checking in, of course :)

you can use:

define("PATH_ROOT", dirname(__FILE__));
include_once PATH_ROOT . "/PoliticalForum/headerSite.php";

Yes, it's possible, from @Fábio Zangirolami answer

audio::-webkit-media-controls-panel, video::-webkit-media-controls-panel {
                background-color: red;
}

break will exit the loop completely, continue will just skip the current iteration.

For example:

for (int i = 0; i < 10; i++) {
    if (i == 0) {
        break;
    }

    DoSomeThingWith(i);
}

The break will cause the loop to exit on the first iteration - DoSomeThingWith will never be executed. This here:

for (int i = 0; i < 10; i++) {
    if(i == 0) {
        continue;
    }

    DoSomeThingWith(i);
}

Will not execute DoSomeThingWith for i = 0, but the loop will continue and DoSomeThingWith will be executed for i = 1 to i = 9.

This snippet works in IE7 at least

<!DOCTYPE html>
<html>
<head>
<meta charset=utf-8 />
<title>Test</title>
<style>
  #foo {
    position: fixed;
    bottom: 0;
    right: 0;
  }
</style>
</head>
<body>
  <div id="foo">Hello World</div>
</body>
</html>

Run this command to show ip4 and ip6:

ifconfig eth0 | grep inet | awk '{print $2}' | cut -d/ -f1

As an even easier solution, you could just use:

$results = $objects.Name

Which should fill $results with an array of all the 'Name' property values of the elements in $objects.

When I align elements in center I use the bootstrap class text-center:

<div class="text-center">Centered content goes here</div>

since you are using jquery library, i would advise you utilize the reset() method.

Firstly, add an id attribute to the form tag

<form id='myForm'>

Then on completion, clear your input fields as:

$('#myForm')[0].reset();

The algorithm in the function consists of testing whether n is a multiple of any integer between 2 and sqrt (n). If it's not, then True is returned which means the number (n) is a prime number, otherwise False is returned which means n divides a number that is between 2 and the floor integer part of sqrt(n).

private static bool isPrime(int n)
        {
            int k = 2;
            while (k * k <= n)
            {
                if ((n % k) == 0)
                    return false;
                else k++;
            }
            return true;
        }

What you can do is the following;

Add a file called ROOT.xml in <catalina_home>/conf/Catalina/localhost/

This ROOT.xml will override the default settings for the root context of the tomcat installation for that engine and host (Catalina and localhost).

Enter the following to the ROOT.xml file;

<Context 
  docBase="<yourApp>" 
  path="" 
  reloadable="true" 
/>

Here, <yourApp> is the name of, well, your app.. :)

And there you go, your application is now the default application and will show up on http://localhost:8080

However, there is one side effect; your application will be loaded twice. Once for localhost:8080 and once for localhost:8080/yourApp. To fix this you can put your application OUTSIDE <catalina_home>/webapps and use a relative or absolute path in the ROOT.xml's docBase tag. Something like this;

<Context 
  docBase="/opt/mywebapps/<yourApp>" 
  path="" 
  reloadable="true" 
/>

And then it should be all OK!

AudioManager audio = (AudioManager) getSystemService(Context.AUDIO_SERVICE);
int currentVolume = audio.getStreamVolume(AudioManager.STREAM_MUSIC);
int maxVolume = audio.getStreamMaxVolume(AudioManager.STREAM_MUSIC);
float percent = 0.7f;
int seventyVolume = (int) (maxVolume*percent);
audio.setStreamVolume(AudioManager.STREAM_MUSIC, seventyVolume, 0);

I had a problem to read/parse the object from S3 because of .get() using Python 2.7 inside an AWS Lambda.

I added json to the example to show it became parsable :)

import boto3
import json

s3 = boto3.client('s3')

obj = s3.get_object(Bucket=bucket, Key=key)
j = json.loads(obj['Body'].read())

NOTE (for python 2.7): My object is all ascii, so I don't need .decode('utf-8')

NOTE (for python 3.6+): We moved to python 3.6 and discovered that read() now returns bytes so if you want to get a string out of it, you must use:

j = json.loads(obj['Body'].read().decode('utf-8'))

Renderer has been deprecated in Angular 4.0.0-rc.1, read the update below

The angular2 way is to use listen or listenGlobal from Renderer

For example, if you want to add a click event to a Component, you have to use Renderer and ElementRef (this gives you as well the option to use ViewChild, or anything that retrieves the nativeElement)

constructor(elementRef: ElementRef, renderer: Renderer) {

    // Listen to click events in the component
    renderer.listen(elementRef.nativeElement, 'click', (event) => {
      // Do something with 'event'
    })
);

You can use listenGlobal that will give you access to document, body, etc.

renderer.listenGlobal('document', 'click', (event) => {
  // Do something with 'event'
});

Note that since beta.2 both listen and listenGlobal return a function to remove the listener (see breaking changes section from changelog for beta.2). This is to avoid memory leaks in big applications (see #6686).

So to remove the listener we added dynamically we must assign listen or listenGlobal to a variable that will hold the function returned, and then we execute it.

// listenFunc will hold the function returned by "renderer.listen"
listenFunc: Function;

// globalListenFunc will hold the function returned by "renderer.listenGlobal"
globalListenFunc: Function;

constructor(elementRef: ElementRef, renderer: Renderer) {
    
    // We cache the function "listen" returns
    this.listenFunc = renderer.listen(elementRef.nativeElement, 'click', (event) => {
        // Do something with 'event'
    });

    // We cache the function "listenGlobal" returns
    this.globalListenFunc = renderer.listenGlobal('document', 'click', (event) => {
        // Do something with 'event'
    });
}

ngOnDestroy() {
    // We execute both functions to remove the respectives listeners

    // Removes "listen" listener
    this.listenFunc();
    
    // Removs "listenGlobal" listener
    this.globalListenFunc();
}

Here's a plnkr with an example working. The example contains the usage of listen and listenGlobal.

Using RendererV2 with Angular 4.0.0-rc.1+ ^{_{(Renderer2 since 4.0.0-rc.3)}}

• 25/02/2017: Renderer has been deprecated, now we should use RendererV2 (see line below). See the commit.

• 10/03/2017: RendererV2 was renamed to Renderer2. See the breaking changes.

RendererV2 has no more listenGlobal function for global events (document, body, window). It only has a listen function which achieves both functionalities.

For reference, I'm copy & pasting the source code of the DOM Renderer implementation since it may change (yes, it's angular!).

listen(target: 'window'|'document'|'body'|any, event: string, callback: (event: any) => boolean):
      () => void {
    if (typeof target === 'string') {
      return <() => void>this.eventManager.addGlobalEventListener(
          target, event, decoratePreventDefault(callback));
    }
    return <() => void>this.eventManager.addEventListener(
               target, event, decoratePreventDefault(callback)) as() => void;
  }

As you can see, now it verifies if we're passing a string (document, body or window), in which case it will use an internal addGlobalEventListener function. In any other case, when we pass an element (nativeElement) it will use a simple addEventListener

To remove the listener it's the same as it was with Renderer in angular 2.x. listen returns a function, then call that function.

Example

// Add listeners
let global = this.renderer.listen('document', 'click', (evt) => {
  console.log('Clicking the document', evt);
})

let simple = this.renderer.listen(this.myButton.nativeElement, 'click', (evt) => {
  console.log('Clicking the button', evt);
});

// Remove listeners
global();
simple();

plnkr with Angular 4.0.0-rc.1 using RendererV2

plnkr with Angular 4.0.0-rc.3 using Renderer2

If you want to merge 2 arrays of objects in JavaScript. You can use this one line trick

Array.prototype.push.apply(arr1,arr2);

For Example

var arr1 = [{name: "lang", value: "English"},{name: "age", value: "18"}];
var arr2 = [{name : "childs", value: '5'}, {name: "lang", value: "German"}];

Array.prototype.push.apply(arr1,arr2); 

console.log(arr1);  // final merged result will be in arr1

Output:

[{"name":"lang","value":"English"},
{"name":"age","value":"18"},
{"name":"childs","value":"5"},
{"name":"lang","value":"German"}]

Although @serge answer is correct but i compared time consumption of his way against xmlpath and i found the xmlpath is so faster. I'll write the compare code and you can check it by yourself. This is @serge way:

DECLARE @startTime datetime2;
DECLARE @endTime datetime2;
DECLARE @counter INT;
SET @counter = 1;

set nocount on;

declare @YourTable table (ID int, Name nvarchar(50))

WHILE @counter < 1000
BEGIN
    insert into @YourTable VALUES (ROUND(@counter/10,0), CONVERT(NVARCHAR(50), @counter) + 'CC')
    SET @counter = @counter + 1;
END

SET @startTime = GETDATE()

;WITH Partitioned AS
(
    SELECT 
        ID,
        Name,
        ROW_NUMBER() OVER (PARTITION BY ID ORDER BY Name) AS NameNumber,
        COUNT(*) OVER (PARTITION BY ID) AS NameCount
    FROM @YourTable
),
Concatenated AS
(
    SELECT ID, CAST(Name AS nvarchar) AS FullName, Name, NameNumber, NameCount FROM Partitioned WHERE NameNumber = 1

    UNION ALL

    SELECT 
        P.ID, CAST(C.FullName + ', ' + P.Name AS nvarchar), P.Name, P.NameNumber, P.NameCount
    FROM Partitioned AS P
        INNER JOIN Concatenated AS C ON P.ID = C.ID AND P.NameNumber = C.NameNumber + 1
)
SELECT 
    ID,
    FullName
FROM Concatenated
WHERE NameNumber = NameCount

SET @endTime = GETDATE();

SELECT DATEDIFF(millisecond,@startTime, @endTime)
--Take about 54 milliseconds

And this is xmlpath way:

DECLARE @startTime datetime2;
DECLARE @endTime datetime2;
DECLARE @counter INT;
SET @counter = 1;

set nocount on;

declare @YourTable table (RowID int, HeaderValue int, ChildValue varchar(5))

WHILE @counter < 1000
BEGIN
    insert into @YourTable VALUES (@counter, ROUND(@counter/10,0), CONVERT(NVARCHAR(50), @counter) + 'CC')
    SET @counter = @counter + 1;
END

SET @startTime = GETDATE();

set nocount off
SELECT
    t1.HeaderValue
        ,STUFF(
                   (SELECT
                        ', ' + t2.ChildValue
                        FROM @YourTable t2
                        WHERE t1.HeaderValue=t2.HeaderValue
                        ORDER BY t2.ChildValue
                        FOR XML PATH(''), TYPE
                   ).value('.','varchar(max)')
                   ,1,2, ''
              ) AS ChildValues
    FROM @YourTable t1
    GROUP BY t1.HeaderValue

SET @endTime = GETDATE();

SELECT DATEDIFF(millisecond,@startTime, @endTime)
--Take about 4 milliseconds

The syntax you are using is new to SQL Server 2008:

INSERT INTO [MyDB].[dbo].[MyTable]
       ([FieldID]
       ,[Description])
 VALUES
       (1000,N'test'),(1001,N'test2')

For SQL Server 2005, you will have to use multiple INSERT statements:

INSERT INTO [MyDB].[dbo].[MyTable]
       ([FieldID]
       ,[Description])
 VALUES
       (1000,N'test')

INSERT INTO [MyDB].[dbo].[MyTable]
       ([FieldID]
       ,[Description])
 VALUES
       (1001,N'test2')

One other option is to use UNION ALL:

INSERT INTO [MyDB].[dbo].[MyTable]
       ([FieldID]
       ,[Description])
SELECT 1000, N'test' UNION ALL
SELECT 1001, N'test2'

I just inherited an old VB.NET console application and needed to set up a Global Exception Handler. Since this question mentions VB.NET a few times and is tagged with VB.NET, but all the other answers here are in C#, I thought I would add the exact syntax for a VB.NET application as well.

Public Sub Main()
    REM Set up Global Unhandled Exception Handler.
    AddHandler System.AppDomain.CurrentDomain.UnhandledException, AddressOf MyUnhandledExceptionEvent

    REM Do other stuff
End Sub

Public Sub MyUnhandledExceptionEvent(ByVal sender As Object, ByVal e As UnhandledExceptionEventArgs)
    REM Log Exception here and do whatever else is needed
End Sub

I used the REM comment marker instead of the single quote here because Stack Overflow seemed to handle the syntax highlighting a bit better with REM.

Try with:

@NgModule({
  imports: [
      BrowserModule,
      RouterModule.forRoot(appRoutes),
      FormsModule               
  ],
  declarations: [
      AppComponent,  
      DashboardComponent      
  ],
  bootstrap: [AppComponent]
})
export class AppModule { }

There is no need to configure the exports in AppModule, because AppModule wont be imported by other modules in your application.

For the parent: display: table;

For the child: display: table-cell;

Then add vertical-align: middle;

I can make a fiddle but home time now, yay!

OK here is the lovely fiddle: http://jsfiddle.net/lharby/AJAhR/

.parent {
   display:table;
}

.child {
   display:table-cell;
   vertical-align:middle;
   text-align:center;
}

You can use the string.replace method

string.replace("character to be removed", "character to be replaced with")

Dim strName As String
strName.Replace("[", "")

Give this a try.

        FirmNames = String.Join(", \n", FirmNameList);

@ECHO OFF
SETLOCAL ENABLEDELAYEDEXPANSION
SET /a pid=1600
FOR /f "skip=3delims=" %%a IN ('tasklist') DO (
 SET "found=%%a"
 SET /a foundpid=!found:~26,8!
 IF %pid%==!foundpid! echo found %pid%=!found:~0,24%!
)

GOTO :EOF

...set PID to suit your circumstance.

int counter = 0;

for(int i = 1; ; i++) {
    if(isPrime(i)
        counter++;

    if(counter == userInput) {
        print(i);
        break;
    }
}

Edit: Your prime function could use a bit of work. Here's one that I have written:

private static boolean isPrime(long n) {
    if(n < 2)
        return false;

    for (long i = 2; i * i <= n; i++) {
        if (n % i == 0)
            return false;
    }
    return true;
}

Note - you only need to go up to sqrt(n) when looking at factors, hence the i * i <= n

IMO code with a stand-alone SELECT used to check to see if a row exists in a table is not taking proper advantage of the database. In your example you've got a hard-coded ID value but that's not how apps work in "the real world" (at least not in my world - yours may be different :-). In a typical app you're going to use a cursor to find data - so let's say you've got an app that's looking at invoice data, and needs to know if the customer exists. The main body of the app might be something like

FOR aRow IN (SELECT * FROM INVOICES WHERE DUE_DATE < TRUNC(SYSDATE)-60)
LOOP
  -- do something here
END LOOP;

and in the -- do something here you want to find if the customer exists, and if not print an error message.

One way to do this would be to put in some kind of singleton SELECT, as in

-- Check to see if the customer exists in PERSON

BEGIN
  SELECT 'TRUE'
    INTO strCustomer_exists
    FROM PERSON
    WHERE PERSON_ID = aRow.CUSTOMER_ID;
EXCEPTION
  WHEN NO_DATA_FOUND THEN
    strCustomer_exists := 'FALSE';
END;

IF strCustomer_exists = 'FALSE' THEN
  DBMS_OUTPUT.PUT_LINE('Customer does not exist!');
END IF;

but IMO this is relatively slow and error-prone. IMO a Better Way (tm) to do this is to incorporate it in the main cursor:

FOR aRow IN (SELECT i.*, p.ID AS PERSON_ID
               FROM INVOICES i
               LEFT OUTER JOIN PERSON p
                 ON (p.ID = i.CUSTOMER_PERSON_ID)
               WHERE DUE_DATA < TRUNC(SYSDATE)-60)
LOOP
  -- Check to see if the customer exists in PERSON

  IF aRow.PERSON_ID IS NULL THEN
    DBMS_OUTPUT.PUT_LINE('Customer does not exist!');
  END IF;
END LOOP;

This code counts on PERSON.ID being declared as the PRIMARY KEY on PERSON (or at least as being NOT NULL); the logic is that if the PERSON table is outer-joined to the query, and the PERSON_ID comes up as NULL, it means no row was found in PERSON for the given CUSTOMER_ID because PERSON.ID must have a value (i.e. is at least NOT NULL).

Share and enjoy.

awk 'NF' file-with-blank-lines > file-with-no-blank-lines

dovers gives us his great answer and based on it you can try use it like

public static class CellDataFormat
{
        public static string General { get { return "General"; } }
        public static string Number { get { return "0"; } }

        // Your custom format 
        public static string NumberDotTwoDigits { get { return "0.00"; } }

        public static string Currency { get { return "$#,##0.00;[Red]$#,##0.00"; } }
        public static string Accounting { get { return "_($* #,##0.00_);_($* (#,##0.00);_($* \" - \"??_);_(@_)"; } }
        public static string Date { get { return "m/d/yy"; } }
        public static string Time { get { return "[$-F400] h:mm:ss am/pm"; } }
        public static string Percentage { get { return "0.00%"; } }
        public static string Fraction { get { return "# ?/?"; } }
        public static string Scientific { get { return "0.00E+00"; } }
        public static string Text { get { return "@"; } }
        public static string Special { get { return ";;"; } }
        public static string Custom { get { return "#,##0_);[Red](#,##0)"; } }
}

True you can't have different sized slides. NOT true the size of you slide doesn't matter. It will size it to your resolution, but you can click on the magnifying icon(at least on PP 2013) and you can then scroll in all directions of your slide in original resolution.

Java8 +

import java.time.Instant;
Instant.now().getEpochSecond(); //timestamp in seconds format (int)
Instant.now().toEpochMilli(); // timestamp in milliseconds format (long)

I'm just starting some string manipulations and found this question. I was probably trying to do something like the OP, "usual me". The previous answers did not clear up my confusion, but after thinking a little about it I finally "got it".

As long as a, b, c, d, and e have the same value, they reference to the same place. Memory is saved. As soon as the variable start to have different values, they get start to have different references. My learning experience came from this code:

import copy
a = 'hello'
b = str(a)
c = a[:]
d = a + ''
e = copy.copy(a)

print map( id, [ a,b,c,d,e ] )

print a, b, c, d, e

e = a + 'something'
a = 'goodbye'
print map( id, [ a,b,c,d,e ] )
print a, b, c, d, e

The printed output is:

[4538504992, 4538504992, 4538504992, 4538504992, 4538504992]

hello hello hello hello hello

[6113502048, 4538504992, 4538504992, 4538504992, 5570935808]

goodbye hello hello hello hello something

As @daniel-t points out in the comment: github.com/docker/docker/issues/2174 is about showing binding only to IPv6 in netstat, but that is not an issue. As that github issues states:

When setting up the proxy, Docker requests the loopback address '127.0.0.1', Linux realises this is an address that exists in IPv6 (as ::0) and opens on both (but it is formally an IPv6 socket). When you run netstat it sees this and tells you it is an IPv6 - but it is still listening on IPv4. If you have played with your settings a little, you may have disabled this trick Linux does - by setting net.ipv6.bindv6only = 1.

In other words, just because you see it as IPv6 only, it is still able to communicate on IPv4 unless you have IPv6 set to only bind on IPv6 with the net.ipv6.bindv6only setting. To be clear, net.ipv6.bindv6only should be 0 - you can run sysctl net.ipv6.bindv6only to verify.

if you want to use it in all of your classes you can use:

public var yourVariable = "something"

if you want to use just in one class you can use :

var yourVariable = "something"

in my own case in django 1.10.1 running on python2.7.11, I was trying to start the server using django-admin runserver instead of manage.py runserver in my project directory.

Add the file to a formData object, and set the Content-Type header to multipart/form-data.

var formData = new FormData();
var imagefile = document.querySelector('#file');
formData.append("image", imagefile.files[0]);
axios.post('upload_file', formData, {
    headers: {
      'Content-Type': 'multipart/form-data'
    }
})

Try to format your date with the Z or z timezone flags:

new SimpleDateFormat("MM/dd/yyyy KK:mm:ss a Z").format(dateObj);

It is worth noting that despite the fact that you can SELECT INTO global variables like:

SELECT ... INTO @XYZ ...

You can NOT use FETCH INTO global variables like:

FETCH ... INTO @XYZ

Looks like it's not a bug. I hope it will be helpful to someone...

Open the htdocs folder there will be index.php file. In that file script is written to go in dashboard folder and show dashboard. So you just have to comment it or delete that script and write any code save it and run http://localhost now dashboard screen will not open and you will see what you have written in that file.

If I have this directory:

ls -l

lrwxrwxrwx  1 nagios nagios     11 août   2 18:46 conf_nagios -> /etc/icinga
-rw-------  1 nagios nagios 724930 août  15 21:00 dead.letter
-rw-r--r--  1 nagios nagios  12312 août  23 00:13 icinga.log
-rw-r--r--  1 nagios nagios   8323 août  23 00:12 icinga.log.gz
drwxr-xr-x  2 nagios nagios   4096 août  23 16:36 tmp

To get all directories, use -L to resolve links:

ls -lL | grep '^d'

drwxr-xr-x 5 nagios nagios   4096 août  15 21:22 conf_nagios
drwxr-xr-x 2 nagios nagios   4096 août  23 16:41 tmp

Without -L:

ls -l | grep '^d'

drwxr-xr-x 2 nagios nagios   4096 août  23 16:41 tmp

conf_nagios directory is missing.

Use this:

String str = " 12,12"
str = str.replaceAll("(\\d+)\\,(\\d+)", "$1.$2");
System.out.println("str:"+str); //-> str:12.12

hope help you.

Have you seen this post on the subversion site? You could also potentially try validating and "fixing" the database directly as described here. (Note that I'm no expert, I just did a quick google search. May not be related to your issues at all).

Personally, I'd try checking out the repo again and reapplying your changes. Not sure if this is possible though in your case?

In the eclipse environment where you execute your java programs, take the following steps:

1. Click on Project just above the menu bar in eclipse.
2. Click on properties.
3. Select libraries, click on the existing library and click Remove on the right of the window.
4. Repeat the process and now click add library, then select JRE system library and click OK.

First quote your javascript:

onclick="hello();"

Also you can't call a php function from javascript; you need:

<script type="text/javascript">
function hello()
{
alert ("hello");
}
</script>

An alternative answer that uses today() method to calculate current date and then subtracts one using timedelta(). Rest of the steps remain the same.

https://docs.python.org/3.7/library/datetime.html#timedelta-objects

from datetime import date, timedelta
today = date.today()
yesterday = today - timedelta(days = 1)
print(today)
print(yesterday)

Output: 
2019-06-14
2019-06-13

At least in C++, I think of thread-safe as a bit of a misnomer in that it leaves a lot out of the name. To be thread-safe, code typically has to be proactive about it. It's not generally a passive quality.

For a class to be thread-safe, it has to have "extra" features that add overhead. These features are part of the implementation of the class and generally speaking, hidden from the interface. That is, different threads can access any of the class' members without ever having to worry about conflicting with a concurrent access by a different thread AND can do so in a very lazy manner, using some plain old regular human coding style, without having to do all that crazy synchronization stuff that is already rolled into the guts of the code being called.

And this is why some people prefer to use the term internally synchronized.

Terminology Sets

There are three main sets of terminology for these ideas I have encountered. The first and historically more popular (but worse) is:

1. thread safe
2. not thread safe

The second (and better) is:

1. thread proof
2. thread compatible
3. thread hostile

A third is:

1. internally synchronized
2. externally synchronized
3. unsynchronizable

Analogies

thread safe ~ thread proof ~ internally synchronized

An example of an internally synchronized (aka. thread-safe or thread proof) system is a restaurant where a host greets you at the door, and disallows you from queueing yourself. The host is part of the mechanism of the restaurant for dealing with multiple customers, and can use some rather tricky tricks for optimizing the seating of waiting customers, like taking the size of their party into account, or how much time they look like they have, or even taking reservations over the phone. The restaurant is internally synchronized because all of this is included "behind the scenes" when you interact with it. You, the customer, don't do any of it. The host does all of it for you.

not thread-safe (but nice) ~ thread compatible ~ externally synchronized ~ free-threaded

Suppose that you go to the bank. There is a line, i.e. contention for the bank tellers. Because you're not a savage, you recognize that the best thing to do in the midst of contention for a resource is to queue like a civilized being. No one technically makes you do this. We hope you have the necessary social programming to do it on your own. In this sense, the bank lobby is externally synchronized. Should we say that it's thread-unsafe? that's what the implication is if you go with the thread-safe, thread-unsafe bipolar terminology set. It's not a very good set of terms. The better terminology is externally synchronized, The bank lobby is not hostile to being accessed by multiple customers, but it doesn't do the work of synchronizing them either. The customers do that themselves.

This is also called "free threaded," where "free" is as in "free from lice"--or in this case, locks. Well, more accurately, synchronization primitives. That doesn't mean the code can run on multiple threads without those primitives. It just means it doesn't come with them already installed and it's up to you, the user of the code, to install them yourself however you see fit. Installing your own synchronization primitives can be difficult and requires thinking hard about the code, but also can lead to the fastest possible program by allowing you to customize how the program executes on today's hyperthreaded CPUs.

not thread safe (and bad) ~ thread hostile ~ unsynchronizable

An example everyday analogy of a thread-hostile system is some jerk with a sports car refusing to use their blinkers and changing lanes willy-nilly. Their driving style is thread hostile or unsychronizable because you have no way to coordinate with them, and this can lead to contention for the same lane, without resolution, and thus an accident as two cars attempt to occupy the same space, without any protocol to prevent this. This pattern can also be thought of more broadly as anti-social, which I prefer because it's less specific to threads and so more generally applicable to many areas of programming.

Why thread safe et al. are a bad terminology set

The first and oldest terminology set fails to make the finer distinction between thread hostility and thread compatibility. Thread compatibility is more passive than so-called thread safety, but that doesn't mean the called code is unsafe for concurrent thread use. It just means it's passive about the synchronization that would allow this, putting it off to the calling code, instead of providing it as part of its internal implementation. Thread compatible is how code should probably be written by default in most cases but this is also sadly often erroneously thought of as thread unsafe, as if it's inherently anti safety, which is a major point of confusion for programmers.

NOTE: Many software manuals actually use the term "thread-safe" to refer to "thread-compatible," adding even more confusion to what was already a mess! I avoid the term "thread-safe" and "thread-unsafe" at all costs for this very reason, as some sources will call something "thread-safe" while others will call it "thread-unsafe" because they can't agree on whether you have to meet some extra standards for safety (synchronization primitives), or just NOT be hostile to be considered "safe". So avoid those terms and use the smarter terms instead, to avoid dangerous miscommunications with other engineers.

Reminder of our goals

Essentially, our goal is to subvert chaos.

We do that by creating deterministic systems we can rely on. Determinism is expensive, mostly due to the opportunity costs of losing parallelism, pipelining, and reordering. We try to minimize the amount of determinism we need to keep our costs low, while also avoiding making decisions that will further erode what little determinism we can afford.

Synchronization of threads is about increasing the order and decreasing the chaos. The levels at which you do this correspond to the terms mentioned above. The highest level means that a system behaves in an entirely predictable manner every time. The second level means that the system behaves well enough that calling code can reliably detect unpredictability. For example, a spurious wakeup in a condition variable or a failure to lock a mutex because it's not ready. The third level means that the system doesn't behave well enough to play with anyone else and can only EVER be run single-threaded without incurring chaos.

You can just create a shortcut and then right click on it -> properties -> change icon, and just browse for your desired icon. Hope this help.

To set an icon of a shortcut programmatically, see this article using SetIconLocation:

How Can I Change the Icon for an Existing Shortcut?:

https://devblogs.microsoft.com/scripting/how-can-i-change-the-icon-for-an-existing-shortcut/

Const DESKTOP = &H10&
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.NameSpace(DESKTOP)
Set objFolderItem = objFolder.ParseName("Test Shortcut.lnk")
Set objShortcut = objFolderItem.GetLink
objShortcut.SetIconLocation "C:\Windows\System32\SHELL32.dll", 13
objShortcut.Save

revenue.pushback("string",map[i].second);

But that says cannot take two arguments. So how can I add to this vector pair?

You're on the right path, but think about it; what does your vector hold? It certainly doesn't hold a string and an int in one position, it holds a Pair. So...

revenue.push_back( std::make_pair( "string", map[i].second ) );     

I usually use a defaultdict for situations like this. You supply a factory method that takes no arguments and creates a value when it sees a new key. It's more useful when you want to return something like an empty list on new keys (see the examples).

from collections import defaultdict
d = defaultdict(lambda: None)
print d['new_key']  # prints 'None'

As Seth stated thread safe means that a method or class instance can be used by multiple threads at the same time without any problems occuring.

Consider the following method:

private int myInt = 0;
public int AddOne()
{
    int tmp = myInt;
    tmp = tmp + 1;
    myInt = tmp;
    return tmp;
}

Now thread A and thread B both would like to execute AddOne(). but A starts first and reads the value of myInt (0) into tmp. Now for some reason the scheduler decides to halt thread A and defer execution to thread B. Thread B now also reads the value of myInt (still 0) into it's own variable tmp. Thread B finishes the entire method, so in the end myInt = 1. And 1 is returned. Now it's Thread A's turn again. Thread A continues. And adds 1 to tmp (tmp was 0 for thread A). And then saves this value in myInt. myInt is again 1.

So in this case the method AddOne() was called two times, but because the method was not implemented in a thread safe way the value of myInt is not 2, as expected, but 1 because the second thread read the variable myInt before the first thread finished updating it.

Creating thread safe methods is very hard in non trivial cases. And there are quite a few techniques. In Java you can mark a method as synchronized, this means that only one thread can execute that method at a given time. The other threads wait in line. This makes a method thread safe, but if there is a lot of work to be done in a method, then this wastes a lot of time. Another technique is to 'mark only a small part of a method as synchronized' by creating a lock or semaphore, and locking this small part (usually called the critical section). There are even some methods that are implemented as lockless thread safe, which means that they are built in such a way that multiple threads can race through them at the same time without ever causing problems, this can be the case when a method only executes one atomic call. Atomic calls are calls that can't be interrupted and can only be done by one thread at a time.

The OOP way of doing this would be to make your module a class instead of a set of unbound methods. Then you could use __init__ or a setter method to set the variables from the caller for use in the module methods.

This is a little C program that illustrates how you could use color codes:

#include <stdio.h>

#define KNRM  "\x1B[0m"
#define KRED  "\x1B[31m"
#define KGRN  "\x1B[32m"
#define KYEL  "\x1B[33m"
#define KBLU  "\x1B[34m"
#define KMAG  "\x1B[35m"
#define KCYN  "\x1B[36m"
#define KWHT  "\x1B[37m"

int main()
{
    printf("%sred\n", KRED);
    printf("%sgreen\n", KGRN);
    printf("%syellow\n", KYEL);
    printf("%sblue\n", KBLU);
    printf("%smagenta\n", KMAG);
    printf("%scyan\n", KCYN);
    printf("%swhite\n", KWHT);
    printf("%snormal\n", KNRM);

    return 0;
}

Update in 2020 in Php7:

there is a better way to do this using the Null coalescing operator by just doing the following:

$data[$parts[0]] = $parts[1] ?? null;

Yes, It is possible. I've separated the code in two files:

index.php

<?php

    $time = time()+(60*60*24*10);
    $timeMemo = (string)$time;
    setcookie("cookie", "" . $timeMemo . "", $time);

?>
<html>
    <head>
        <title>
            Get cookie expiration date from JS
        </title>
        <script type="text/javascript">

            function cookieExpirationDate(){

                var infodiv = document.getElementById("info");

                var xmlhttp;
                if (window.XMLHttpRequest){ 
                    xmlhttp = new XMLHttpRequest;
                }else{
                    xmlhttp = new ActiveXObject(Microsoft.XMLHTTP);
                }

                xmlhttp.onreadystatechange = function (){
                    if(xmlhttp.readyState == 4 && xmlhttp.status == 200){
                        infodiv.innerHTML = xmlhttp.responseText;
                    }
                }

                xmlhttp.open("GET", "cookie.php", true);
                xmlhttp.send();

            }

        </script>
    </head>
    <body>
        <input type="button" onclick="javascript:cookieExpirationDate();" value="Get Cookie expire date" />
        <hr />
        <div id="info">
        </div>
    </body>
</html>

cookie.php

<?php

    function secToDays($sec){
        return ($sec / 60 / 60 / 24);
    }

    if(isset($_COOKIE['cookie'])){

        if(round(secToDays((intval($_COOKIE['cookie']) - time())),1) < 1){
            echo "Cookie will expire today";
        }else{
            echo "Cookie will expire in " . round(secToDays((intval($_COOKIE['cookie']) - time())),1) . " day(s)";
        }
    }else{
        echo "Cookie not set...";
    }

?>

Now, index.php must be loaded once. The button "Get Cookie expire date", thru an AJAX request, will always get you an updated "time left" for cookie expiration, in this case in days.

1. Down the apache server by running below in putty cd $ADMIN_SCRIPTS_HOME ./adstpall.sh
2. Drop the Global temporary tables drop table t;

This will workout..

In the CSS write:

.exampleclass {
    background:#000000;
    opacity: 10; /* you can always adjust this */
}

you should use executorService.shutdown() and executorService.awaitTermination method.

An example as follows :

public class ScheduledThreadPoolExample {

    public static void main(String[] args) throws InterruptedException {
        ScheduledExecutorService executorService = Executors.newScheduledThreadPool(5);
        executorService.scheduleAtFixedRate(() -> System.out.println("process task."),
                0, 1, TimeUnit.SECONDS);

        TimeUnit.SECONDS.sleep(10);
        executorService.shutdown();
        executorService.awaitTermination(1, TimeUnit.DAYS);
    }

}

Just change the first line as follows :

include ActionView::Helpers

that will make it works.

UPDATE: For Rails 3 use:

ActionController::Base.helpers.sanitize(str)

Credit goes to lornc's answer

In version 2.1.5

• bootstrap-datetimepicker.js
• http://www.eyecon.ro/bootstrap-datepicker
• Contributions:
• Andrew Rowls
• Thiago de Arruda
• updated for Bootstrap v3 by Jonathan Peterson @Eonasdan

changeDate has been renamed to change.dp so changedate was not working for me

$("#datetimepicker").datetimepicker().on('change.dp', function (e) {
            FillDate(new Date());
    });

also needed to change css class from datepicker to datepicker-input

<div id='datetimepicker' class='datepicker-input input-group controls'>
   <input id='txtStartDate' class='form-control' placeholder='Select datepicker' data-rule-required='true' data-format='MM-DD-YYYY' type='text' />
   <span class='input-group-addon'>
       <span class='icon-calendar' data-time-icon='icon-time' data-date-icon='icon-calendar'></span>
   </span>
</div>

Date formate also works in capitals like this data-format='MM-DD-YYYY'

it might be helpful for someone it gave me really hard time :)

In my case it was getting install at a different python dist_package (python 3.5) whereas I was using python 3.6, so the below helped:

python -m pip install pyspark

Try using something like this:

<link rel="image_src" href="http://yoursite.com/graphics/yourimage.jpg" /link>`

Seems to work just fine on Firefox as long as you use a full path to your image.

Trouble is it get vertically offset downward for some reason. Image is 200 x 200 as recommended somewhere I read.

Easily achieved with the css property user-select set to all. Like this:

div.anyClass {_x000D_
  user-select: all;_x000D_
}

You have to add just one line

useLibrary 'org.apache.http.legacy'

into build.gradle(Module: app), for example

apply plugin: 'com.android.application'

android {
    compileSdkVersion 24
    buildToolsVersion "25.0.0"

    useLibrary 'org.apache.http.legacy'

    defaultConfig {
        applicationId "com.avenues.lib.testotpappnew"
        minSdkVersion 15
        targetSdkVersion 24
        versionCode 1
        versionName "1.0"
        testInstrumentationRunner "android.support.test.runner.AndroidJUnitRunner"
    }
    buildTypes {
        release {
            minifyEnabled false
            proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'
        }
    }
}

dependencies {
    compile fileTree(dir: 'libs', include: ['*.jar'])
    androidTestCompile('com.android.support.test.espresso:espresso-core:2.2.2', {
        exclude group: 'com.android.support', module: 'support-annotations'
    })
    compile 'com.android.support:appcompat-v7:24.2.1'
    testCompile 'junit:junit:4.12'
}

It's a good practice to initialize the local variables inside the method block before using it. Here is a mistake that a beginner may commit.

  public static void main(String[] args){
    int a;
    int[] arr = {1,2,3,4,5};
    for(int i=0; i<arr.length; i++){
        a = arr[i];
    }
    System.out.println(a);
  }

You may expect the console will show '5' but instead the compiler will throw 'variable a might not be initialized' error. Though one may think variable a is 'initialized' inside the for loop, the compiler does not think in that way. What if arr.length is 0? The for loop will not be run at all. Hence, the compiler will give variable a might not have been initialized to point out the potential danger and require you to initialize the variable.

To prevent this kind of error, just initialize the variable when you declare it.

int a = 0;

https://facebook.github.io/react/docs/jsx-in-depth.html#javascript-expressions

You can pass any JavaScript expression as children, by enclosing it within {}. For example, these expressions are equivalent:

<MyComponent>foo</MyComponent>

<MyComponent>{'foo'}</MyComponent>

This is often useful for rendering a list of JSX expressions of arbitrary length. For example, this renders an HTML list:

function Item(props) {
  return <li>{props.message}</li>;
}

function TodoList() {
  const todos = ['finish doc', 'submit pr', 'nag dan to review'];
  return (
    <ul>
      {todos.map((message) => <Item key={message} message={message} />)}
    </ul>
  );
}

class First extends React.Component {_x000D_
  constructor(props) {_x000D_
    super(props);_x000D_
    this.state = {_x000D_
      data: [{name: 'bob'}, {name: 'chris'}],_x000D_
    };_x000D_
  }_x000D_
  _x000D_
  render() {_x000D_
    return (_x000D_
      <ul>_x000D_
        {this.state.data.map(d => <li key={d.name}>{d.name}</li>)}_x000D_
      </ul>_x000D_
    );_x000D_
  }_x000D_
}_x000D_
_x000D_
ReactDOM.render(_x000D_
  <First />,_x000D_
  document.getElementById('root')_x000D_
);_x000D_
  

<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react.min.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react-dom.min.js"></script>_x000D_
<div id="root"></div>

You need #include<string> to use string AND #include<iostream> to use cin and cout. (I didn't get it when I read the answers). Here's some code which works:

#include<string>
#include<iostream>
using namespace std;

int main()
{
    string name;
    cin >> name;
    string message("hi");
    cout << name << message;
    return 0;
}

I have Visual Studio 2013 Express. I had to delete the registry key under:

hkey_current_user\software\Microsoft\VSCommon\12.\clientservices\tokenstorge\VWDExpress\ideuser

Just want to reiterate this will work in pandas >= 0.9.1:

In [2]: read_csv('sample.csv', dtype={'ID': object})
Out[2]: 
                           ID
0  00013007854817840016671868
1  00013007854817840016749251
2  00013007854817840016754630
3  00013007854817840016781876
4  00013007854817840017028824
5  00013007854817840017963235
6  00013007854817840018860166

I'm creating an issue about detecting integer overflows also.

EDIT: See resolution here: https://github.com/pydata/pandas/issues/2247

Update as it helps others:

To have all columns as str, one can do this (from the comment):

pd.read_csv('sample.csv', dtype = str)

To have most or selective columns as str, one can do this:

# lst of column names which needs to be string
lst_str_cols = ['prefix', 'serial']
# use dictionary comprehension to make dict of dtypes
dict_dtypes = {x : 'str'  for x in lst_str_cols}
# use dict on dtypes
pd.read_csv('sample.csv', dtype=dict_dtypes)

If you need the URL till hostname and not the path use Apache's Common Lib StringUtil, and from URL extract the substring till third indexOf /.

public static String getURL(HttpServletRequest request){
   String fullURL = request.getRequestURL().toString();
   return fullURL.substring(0,StringUtils.ordinalIndexOf(fullURL, "/", 3)); 
}

Example: If fullURL is https://example.com/path/after/url/ then Output will be https://example.com

I'm working with

jQuery Autocomplete

I tried looking for an event as described above, but when the request function fires it doesn't seem to be available. I used this.element.attr("id") to get the element's ID instead, and it seems to work fine.

FWIW the removal of Apache library was foreshadowed a while ago. Our good friend Jesse Wilson gave us a clue back in 2011: http://android-developers.blogspot.com/2011/09/androids-http-clients.html

Google stopped working on ApacheHTTPClient a while ago, so any library that is still relying upon that should be put onto the list of deprecated libraries unless the maintainers update their code.

<rant> I can't tell you how many technical arguments I've had with people who insisted on sticking with Apache HTTP client. There are some major apps that are going to break because management at my not-to-be-named previous employers didn't listen to their top engineers or knew what they were talking about when they ignored the warning ... but, water under the bridge.

I win.

</rant>

I have not seen many solutions to this problem. Some solutions make use of directory traversal using CD and others make use of batch functions. My personal preference has been for batch functions and in particular, the MakeAbsolute function as provided by DosTips.

The function has some real benefits, primarily that it does not change your current working directory and secondly that the paths being evaluated don't even have to exist. You can find some helpful tips on how to use the function here too.

Here is an example script and its outputs:

@echo off

set scriptpath=%~dp0
set siblingfile=sibling.bat
set siblingfolder=sibling\
set fnwsfolder=folder name with spaces\
set descendantfolder=sibling\descendant\
set ancestorfolder=..\..\
set cousinfolder=..\uncle\cousin

call:MakeAbsolute siblingfile      "%scriptpath%"
call:MakeAbsolute siblingfolder    "%scriptpath%"
call:MakeAbsolute fnwsfolder       "%scriptpath%"
call:MakeAbsolute descendantfolder "%scriptpath%"
call:MakeAbsolute ancestorfolder   "%scriptpath%"
call:MakeAbsolute cousinfolder     "%scriptpath%"

echo scriptpath:       %scriptpath%
echo siblingfile:      %siblingfile%
echo siblingfolder:    %siblingfolder%
echo fnwsfolder:       %fnwsfolder%
echo descendantfolder: %descendantfolder%
echo ancestorfolder:   %ancestorfolder%
echo cousinfolder:     %cousinfolder%
GOTO:EOF

::----------------------------------------------------------------------------------
:: Function declarations
:: Handy to read http://www.dostips.com/DtTutoFunctions.php for how dos functions
:: work.
::----------------------------------------------------------------------------------
:MakeAbsolute file base -- makes a file name absolute considering a base path
::                      -- file [in,out] - variable with file name to be converted, or file name itself for result in stdout
::                      -- base [in,opt] - base path, leave blank for current directory
:$created 20060101 :$changed 20080219 :$categories Path
:$source http://www.dostips.com
SETLOCAL ENABLEDELAYEDEXPANSION
set "src=%~1"
if defined %1 set "src=!%~1!"
set "bas=%~2"
if not defined bas set "bas=%cd%"
for /f "tokens=*" %%a in ("%bas%.\%src%") do set "src=%%~fa"
( ENDLOCAL & REM RETURN VALUES
    IF defined %1 (SET %~1=%src%) ELSE ECHO.%src%
)
EXIT /b

And the output:

C:\Users\dayneo\Documents>myscript
scriptpath:       C:\Users\dayneo\Documents\
siblingfile:      C:\Users\dayneo\Documents\sibling.bat
siblingfolder:    C:\Users\dayneo\Documents\sibling\
fnwsfolder:       C:\Users\dayneo\Documents\folder name with spaces\
descendantfolder: C:\Users\dayneo\Documents\sibling\descendant\
ancestorfolder:   C:\Users\
cousinfolder:     C:\Users\dayneo\uncle\cousin

I hope this helps... It sure helped me :) P.S. Thanks again to DosTips! You rock!

public static long byteArrayToLong(byte[] bytes) {
    return ((long) (bytes[0]) << 56)
            + (((long) bytes[1] & 0xFF) << 48)
            + ((long) (bytes[2] & 0xFF) << 40)
            + ((long) (bytes[3] & 0xFF) << 32)
            + ((long) (bytes[4] & 0xFF) << 24)
            + ((bytes[5] & 0xFF) << 16)
            + ((bytes[6] & 0xFF) << 8)
            + (bytes[7] & 0xFF);
}

convert bytes array (long is 8 bytes) to long

For the one who want borderless buttons but still animated when clicked. Add this in the button.

style="?android:attr/borderlessButtonStyle"

If you wanted a divider / line between them. Add this in the linear layout.

style="?android:buttonBarStyle"

Summary

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
   android:layout_width="fill_parent"
   android:layout_height="wrap_content"
   android:orientation="horizontal"
   style="?android:buttonBarStyle">

    <Button
        android:id="@+id/add"
        android:layout_weight="1"
        android:layout_width="fill_parent"
        android:layout_height="wrap_content"
        android:text="@string/add_dialog" 
        style="?android:attr/borderlessButtonStyle"
        />

    <Button
        android:id="@+id/cancel"
        android:layout_weight="1"
        android:layout_width="fill_parent"
        android:layout_height="wrap_content"
        android:text="@string/cancel_dialog" 
        style="?android:attr/borderlessButtonStyle"
        />

</LinearLayout>

I do not really know about it, but it seems to me, by experience, that jpcgt is actually right. Following example: If I use following code

t = [] # implicit instantiation
t = t.append(1)

in the interpreter, then calling t gives me just "t" without any list, and if I append something else, e.g.

t = t.append(2)

I get the error "'NoneType' object has no attribute 'append'". If, however, I create the list by

t = list() # explicit instantiation

then it works fine.

You can't always rely on MIME type..

According to: http://filext.com/file-extension/CSV

text/comma-separated-values, text/csv, application/csv, application/excel, application/vnd.ms-excel, application/vnd.msexcel, text/anytext

There are various MIME types for CSV.

Your probably best of checking extension, again not very reliable, but for your application it may be fine.

$info = pathinfo($_FILES['uploadedfile']['tmp_name']);

if($info['extension'] == 'csv'){
 // Good to go
}

Code untested.

I think you want (this won't fit in a int though, you'll need to store it as a long):

long result = dateDate.Year * 10000000000 + dateDate.Month * 100000000 + dateDate.Day * 1000000 + dateDate.Hour * 10000 + dateDate.Minute * 100 + dateDate.Second;

Alternatively, storing the ticks is a better idea.

Issue could be with different table(might not exists or grant privilege is not for that table) mapped due to foreign key or synonym.

For me the issue was with a column in that table which had mapping with another schema-table, and it was missing.ex, public-synonym.

C:\> wmic cpu get loadpercentage
LoadPercentage
0

Or

C:\> @for /f "skip=1" %p in ('wmic cpu get loadpercentage') do @echo %p%
4%

A pseudo element works best.

a, a:hover {
  position: relative;
  text-decoration: none;
}
a:after {
  content: '';
  display: block;
  position: absolute;
  height: 0;
  top:90%;
  left: 0;
  right: 0;
  border-bottom: solid 1px red;
}

See jsfiddle.

You don't need any extra elements, you can position it as close or far as you want from the text (border-bottom is kinda far for my liking), there aren't any extra colors that show up if your link is over a different colored background (like with the box-shadow trick), and it works in all browsers (text-decoration-color only supports Firefox as of yet).

Possible downside: The link can't be position:static, but that's probably not a problem the vast majority of the time. Just set it to relative and all is good.

actual error thrown Message=Unrecognized element 'providers' in web.config so from the web.config file remove the providers section

It depends what you want to build really. For example the navigation drawer uses fragments. Tabs use fragments as well. Another good implementation,is where you have a listview. When you rotate the phone and click a row the activity is shown in the remaining half of the screen. Personally,I use fragments and fragment dialogs,as it is more professional. Plus they are handled easier in rotation.

I needed to show the string in UI as well as save that to an xml configuration file. The above specified format is good for string in c++, I would add we can have the xml compatible string for the special character by replacing "\u" by "&#x" and adding a ";" at the end.

For example : C++ : "\u0444" --> XML : "ф"

Like it has been already mentioned, you are reading the file in binary mode and then creating a list of bytes. In your following for loop you are comparing string to bytes and that is where the code is failing.

Decoding the bytes while adding to the list should work. The changed code should look as follows:

with open(fname, 'rb') as f:
    lines = [x.decode('utf8').strip() for x in f.readlines()]

The bytes type was introduced in Python 3 and that is why your code worked in Python 2. In Python 2 there was no data type for bytes:

>>> s=bytes('hello')
>>> type(s)
<type 'str'>

If you are able to use NOW() this would be simplest form:

SELECT * FROM `fab_scheduler` WHERE eventdate>=(NOW() - INTERVAL 1 DAY)) AND eventdate<NOW() ORDER BY eventdate DESC;

With MySQL 5.6+ query abowe should do. Depending on sql server, You may be required to use CURRDATE() instead of NOW() - which is alias for DATE(NOW()) and will return only date part of datetime data type;

i had same problem , try this :

void client_handler(Socket client) // set 'KeepAlive' true
{
    while (true)
    {
        try
        {
            if (client.Connected)
            {

            }
            else
            { // client disconnected
                break;
            }
        }
        catch (Exception)
        {
            client.Poll(4000, SelectMode.SelectRead);// try to get state
        }
    }
}

> use the -O option. [...] If the tar file is corrupt, the process will abort with an error.

Sometimes yes, but sometimes not. Let's see an example of a corrupted file:

echo Pete > my_name
tar -cf my_data.tar my_name 

# // Simulate a corruption
sed < my_data.tar 's/Pete/Fool/' > my_data_now.tar
# // "my_data_now.tar" is the corrupted file

tar -xvf my_data_now.tar -O

It shows:

my_name
Fool  

Even if you execute

echo $?

tar said that there was no error:

0

but the file was corrupted, it has now "Fool" instead of "Pete".

You could create a CSS class for this and apply it to your columns. Since the gutter (spacing between columns) is controlled by padding in Bootstrap 3, adjust the padding accordingly:

.col {
  padding-right:7px;
  padding-left:7px;
}

Demo: http://bootply.com/93473

EDIT If you only want the spacing between columns you can select all cols except first and last like this..

.col:not(:first-child,:last-child) {
  padding-right:7px;
  padding-left:7px;
}

Updated Bootply

For Bootstrap 4 see: Remove gutter space for a specific div only

I have tried similar issue and works fine, try it. It can handle different orientations between PDFs.

    // array to hold list of PDF files to be merged
    $files = array("a.pdf", "b.pdf", "c.pdf");
    $pageCount = 0;
    // initiate FPDI
    $pdf = new FPDI();

    // iterate through the files
    foreach ($files AS $file) {
        // get the page count
        $pageCount = $pdf->setSourceFile($file);
        // iterate through all pages
        for ($pageNo = 1; $pageNo <= $pageCount; $pageNo++) {
            // import a page
            $templateId = $pdf->importPage($pageNo);
            // get the size of the imported page
            $size = $pdf->getTemplateSize($templateId);

            // create a page (landscape or portrait depending on the imported page size)
            if ($size['w'] > $size['h']) {
                $pdf->AddPage('L', array($size['w'], $size['h']));
            } else {
                $pdf->AddPage('P', array($size['w'], $size['h']));
            }

            // use the imported page
            $pdf->useTemplate($templateId);

            $pdf->SetFont('Helvetica');
            $pdf->SetXY(5, 5);
            $pdf->Write(8, 'Generated by FPDI');
        }
    }

localStorage.setItem('user', JSON.stringify(user));

Then to retrieve it from the store and convert to an object again:

var user = JSON.parse(localStorage.getItem('user'));

If we need to delete all entries of the store we can simply do:

localStorage.clear();

I've found the best way to program the font sizes of a website are to define a base font size for the body and then use em's (or rem's) for every other font-size I declare after that. That's personal preference I suppose, but it's served me well and also made it very easy to incorporate a more responsive design.

As far as using rem units go, I think it's good to find a balance between being progressive in your code, but to also offer support for older browsers. Check out this link about browser support for rem units, that should help out a good amount on your decision.

According to the below article:

http://tools.ietf.org/html/rfc3696 (Page 6, Section 3)

It's mentioned that:

"There is a length limit on email addresses. That limit is a maximum of 64 characters (octets) in the "local part" (before the "@") and a maximum of 255 characters (octets) in the domain part (after the "@") for a total length of 320 characters. Systems that handle email should be prepared to process addresses which are that long, even though they are rarely encountered."

So, the maximum total length for an email address is 320 characters ("local part": 64 + "@": 1 + "domain part": 255 which sums to 320)

All the answers are not really correct, try this:

select * from shirts where 1 IN (colors);

1. You need

   @ManagedBean(name="userBean")

2. Make sure you have getUser() method.

3. Type of setUser() method should be void.

4. Make sure that User class has proper setters and getters as well.

It looks like you added a dependency on a Paypal library but did not include that library in your project:

Caused by: java.lang.ClassNotFoundException: com.paypal.exception.SSLConfigurationException

I'm not sure which jar, but it is most likely paypal-core.jar. Try adding it under WEB-INF/lib.

You need to do something along the lines of the following:

NSDate *now = [NSDate date];
NSCalendar *calendar = [NSCalendar currentCalendar];
NSDateComponents *components = [calendar components:NSHourCalendarUnit fromDate:now];
NSLog(@"%d", [components hour]);

And so on.

My personal preference is using the method .tr

as in:

string = "this is a string to smash together"

string.tr(' ', '') # => "thisisastringtosmashtogether"

Thanks to @FrankScmitt for pointing out that to make this delete all whitespace(not just spaces) you would need to write it as such:

string = "this is a string with tabs\t and a \nnewline"

string.tr(" \n\t", '') # => "thisisastringwithtabsandanewline"

Depending on what you want to accomplish within the loop, iterate over one of these instead:

• countries.keySet()
• countries.entrySet()
• countries.values()

For me, I was writing to a file that is opened in Excel.

Following MartinR and Boecko's lead:

$ curl -s 'http://twitter.com/users/username.json' | python -mjson.tool

That will give you an extremely grep friendly output. Very convenient:

$ curl -s 'http://twitter.com/users/username.json' | python -mjson.tool | grep my_key

g.next() has been renamed to g.__next__(). The reason for this is consistency: special methods like __init__() and __del__() all have double underscores (or "dunder" in the current vernacular), and .next() was one of the few exceptions to that rule. This was fixed in Python 3.0. [*]

But instead of calling g.__next__(), use next(g).

[*] There are other special attributes that have gotten this fix; func_name, is now __name__, etc.

int largest = 0;
int k = 0;
for (int i = 0; i < n; i++) {
    int count = 1;
    for (int j = i + 1; j < n; j++) {
        if (a[i] == a[j]) {
            count++;
        }
    }
    if (count > largest) {
        k = a[i];
        largest = count;
    }
}

So here n is the length of the array, and a[] is your array.

First, take the first element and check how many times it is repeated and increase the counter (count) as to see how many times it occurs. Check if this maximum number of times that a number has so far occurred if yes, then change the largest variable (to store the maximum number of repetitions) and if you would like to store the variable as well, you can do so in another variable (here k).

I know this isn't the fastest, but definitely, the easiest way to understand

Assuming you wanted to overwrite the previous value of the object referred to by a, then a member function would have to be invoked.

Complex a, b, c;
// ...
a = b.add(c);

In C++, this expression tells the compiler to create three (3) objects on the stack, perform addition, and copy the resultant value from the temporary object into the existing object a.

However, in Java, operator= doesn't perform value copy for reference types, and users can only create new reference types, not value types. So for a user-defined type named Complex, assignment means to copy a reference to an existing value.

Consider instead:

b.set(1, 0); // initialize to real number '1'
a = b; 
b.set(2, 0);
assert( !a.equals(b) ); // this assertion will fail

In C++, this copies the value, so the comparison will result not-equal. In Java, operator= performs reference copy, so a and b are now referring to the same value. As a result, the comparison will produce 'equal', since the object will compare equal to itself.

The difference between copies and references only adds to the confusion of operator overloading. As @Sebastian mentioned, Java and C# both have to deal with value and reference equality separately -- operator+ would likely deal with values and objects, but operator= is already implemented to deal with references.

In C++, you should only be dealing with one kind of comparison at a time, so it can be less confusing. For example, on Complex, operator= and operator== are both working on values -- copying values and comparing values respectively.

if you are using properties file you can add following line there:

spark.jars=jars/your_jar1.jar,...

assuming that

<your root from where you run spark-submit>
  |
  |-jars
      |-your_jar1.jar

You can also combine the p3p.xml and policy.xml files as such:

/home/ubuntu/sites/shared/w3c/p3p.xml

<META xmlns="http://www.w3.org/2002/01/P3Pv1">
  <POLICY-REFERENCES>
    <POLICY-REF about="#policy1">
      <INCLUDE>/</INCLUDE>
      <COOKIE-INCLUDE/>
    </POLICY-REF>
  </POLICY-REFERENCES>
  <POLICIES>
    <POLICY discuri="" name="policy1">
      <ENTITY>
        <DATA-GROUP>
          <DATA ref="#business.name"></DATA> 
          <DATA ref="#business.contact-info.online.email"></DATA> 
        </DATA-GROUP>
      </ENTITY>
      <ACCESS>
        <nonident/>
      </ACCESS>
      <!-- if the site has a dispute resolution procedure that it follows, a DISPUTES-GROUP should be included here -->
      <STATEMENT>
        <PURPOSE>
          <current/>
          <admin/>
          <develop/>
        </PURPOSE>
        <RECIPIENT>
          <ours/>
        </RECIPIENT>
        <RETENTION>
          <indefinitely/>
        </RETENTION>
        <DATA-GROUP>
          <DATA ref="#dynamic.clickstream"/>
          <DATA ref="#dynamic.http"/>
        </DATA-GROUP>
      </STATEMENT>
    </POLICY>
  </POLICIES>
</META>

I found the easiest way to add a header is proxy through Apache and use mod_headers, as such:

<VirtualHost *:80>
  ServerName mydomain.com

  DocumentRoot /home/ubuntu/sites/shared/w3c/

  ProxyRequests off
  ProxyPass /w3c/ !
  ProxyPass / http://127.0.0.1:8080/
  ProxyPassReverse / http://127.0.0.1:8080/
  ProxyPreserveHost on

  Header add p3p 'P3P:policyref="/w3c/p3p.xml", CP="NID DSP ALL COR"'
</VirtualHost>

So we proxy all requests except those to /w3c/p3p.xml to our application server.

You can test it all with the W3C validator

Here is the swift version (by using @Nitesh Borad objective C code) :-

   if let img: UIImage = UIImage(data: previewImg[indexPath.row]) {
                cell.cardPreview.image = img
            } else {
                // The image isn't cached, download the img data
                // We should perform this in a background thread
                let imgURL = NSURL(string: "webLink URL")
                let request: NSURLRequest = NSURLRequest(URL: imgURL!)
                let session = NSURLSession.sharedSession()
                let task = session.dataTaskWithRequest(request, completionHandler: {data, response, error -> Void in
                    let error = error
                    let data = data
                    if error == nil {
                        // Convert the downloaded data in to a UIImage object
                        let image = UIImage(data: data!)
                        // Store the image in to our cache
                        self.previewImg[indexPath.row] = data!
                        // Update the cell
                        dispatch_async(dispatch_get_main_queue(), {
                            if let cell: YourTableViewCell = tableView.cellForRowAtIndexPath(indexPath) as? YourTableViewCell {
                                cell.cardPreview.image = image
                            }
                        })
                    } else {
                        cell.cardPreview.image = UIImage(named: "defaultImage")
                    }
                })
                task.resume()
            }

In lightsail a virtual machine, SSD-based storage, data transfer, DNS management, and a static IP are all offered as a package. Whereas in normal case you provision an EC2 instance and then setup the rest of these things.Also Bandwidth included in the price, no security groups to set up, no need to worry about EBS volumes sizing.

if version < 8.4.0

pg_dump -D -t <table> <database>

Add -a before the -t if you only want the INSERTs, without the CREATE TABLE etc to set up the table in the first place.

version >= 8.4.0

pg_dump --column-inserts --data-only --table=<table> <database>

On newer (for example 8.0.0) the simplest solution is (good choice for a scripted start-up for example):

mysqld --port=23306

public class GetUsers extends AsyncTask {

    @Override
    protected void onPreExecute() {
        super.onPreExecute();

    }

    private String convertStreamToString(InputStream is) {
        BufferedReader reader = new BufferedReader(new InputStreamReader(is));
        StringBuilder sb = new StringBuilder();

        String line = null;
        try {
            while ((line = reader.readLine()) != null) {
                sb.append(line + "\n");
            }
        } catch (IOException e) {
            e.printStackTrace();
        } finally {
            try {
                is.close();
            } catch (IOException e) {
                e.printStackTrace();
            }
        }

        return sb.toString();
    }

    public String connect()
    {
        HttpClient httpclient = new DefaultHttpClient();

        // Prepare a request object
        HttpPost htopost = new HttpPost("URL");
        htopost.setHeader(new BasicHeader("Authorization","Basic Og=="));

        try {

            JSONObject param = new JSONObject();
            param.put("PageSize",100);
            param.put("Userid",userId);
            param.put("CurrentPage",1);

            htopost.setEntity(new StringEntity(param.toString()));

            // Execute the request
            HttpResponse response;

            response = httpclient.execute(htopost);
            // Examine the response status
            // Get hold of the response entity
            HttpEntity entity = response.getEntity();

            if (entity != null) {

                // A Simple JSON Response Read
                InputStream instream = entity.getContent();
                String result = convertStreamToString(instream);

                // A Simple JSONObject Creation
                json = new JSONArray(result);

                // Closing the input stream will trigger connection release
                instream.close();
                return ""+response.getStatusLine().getStatusCode();
            }
        } catch (Exception e) {
            e.printStackTrace();
        }

        return null;
    }

    @Override
    protected String doInBackground(String... urls) {
        return connect();
    }

    @Override
    protected void onPostExecute(String status){
        try {

            if(status.equals("200"))
            {

                    Global.defaultMoemntLsit.clear();

                    for (int i = 0; i < json.length(); i++) {
                        JSONObject ojb = json.getJSONObject(i);
                        UserMomentModel u = new UserMomentModel();
                        u.setId(ojb.getString("Name"));
                        u.setUserId(ojb.getString("ID"));


                        Global.defaultMoemntLsit.add(u);
                    }




                            userAdapter = new UserAdapter(getActivity(), Global.defaultMoemntLsit);
                            recycleView.setAdapter(userMomentAdapter);
                            recycleView.setLayoutManager(mLayoutManager);
           }



        }
        catch (Exception e)
        {
            e.printStackTrace();

        }
    }
}

I can't comment but don't want to start a new thread. But this isn't working. A simple round trip:

byte[] b = new byte[]{ 0, 0, 0, -127 };  // 0x00000081
String s = new String(b,StandardCharsets.UTF_8); // UTF8 = 0x0000, 0x0000,  0x0000, 0xfffd
b = s.getBytes(StandardCharsets.UTF_8); // [0, 0, 0, -17, -65, -67] 0x000000efbfbd != 0x00000081

I'd need b[] the same array before and after encoding which it isn't (this referrers to the first answer).

Try:

var selectedVal;

for( i = 0; i < document.form_name.gender.length; i++ )
{
  if(document.form_name.gender[i].checked)
    selectedVal = document.form_name.gender[i].value; //male or female
    break;
  }
}

I know that many people finding this solution simple and clear:

create table diff_timestamp (
f1 timestamp
, f2 timestamp);

insert into diff_timestamp values(systimestamp-1, systimestamp+2);
commit;

select cast(f2 as date) - cast(f1 as date) from diff_timestamp;

bingo!

For others that arrive on this page from google:

DataRow also has a function .IsNull("ColumnName")

    public DateTime? TestDt; 
    public Parse(DataRow row)
    {
        if (!row.IsNull("TEST_DT"))
            TestDt = Convert.ToDateTime(row["TEST_DT"]);
    }

I had a parent view controller with a really long title. This resulted in the back button text bleeding into the title of the child view controller.

After trying a bunch of different solutions, this is what I ended up doing (expanding on the @john.k.doe approach):

Using Xcode 7.2, Swift 2

1. In the Storyboard, add a Navigation Item to the Parent View Controller scene (not the child VC)

2. On the Attributes Inspector of your new Navigation Item, type in a space character in the Back Button field. More on this later.

3. In the Parent view controller, add the following code:

snippet:

override func prepareForSegue(segue: UIStoryboardSegue, sender: AnyObject?) {
    switch segue.destinationViewController {
    case is ChildViewController:
        navigationItem.backBarButtonItem?.title = ""
    default:
        navigationItem.backBarButtonItem?.title = "Full Parent Title"
    }
}

Explanation:

The back button sort of belongs to the parent view controller. The Navigation Item gives you a handle to the back button, so you can set the title in code or in the Storyboard.

Note:

If you leave the Navigation Item Back Button text as the default empty string, the back button title will become "Back".

Other approaches work, why use this one?:

While it's possible to override the back button title on the child view controller, it was a challenge getting a handle to it until it had already flashed briefly on the screen.

Some of the approaches construct a new back button and override the existing one. I'm sure it works, and probably necessary in some use cases. But I prefer to leverage existing APIs when possible.

Changing the title of the parent view controller is the quickest solution for some situations. However, this changes the parent title so you have to manage state. Things also get messy with a Tab Bar Controller because title changes cause side effects with the Tab Bar Item titles.

/* PlanetGreeter */

class PlanetGreeter {
    hello   : { () : void; } [] = [];
    planet_1 : string = "World";
    planet_2 : string = "Mars";
    planet_3 : string = "Venus";
    planet_4 : string = "Uranus";
    planet_5 : string = "Pluto";
    constructor() {
        this.hello.push( () => { this.greet(this.planet_1); } );
        this.hello.push( () => { this.greet(this.planet_2); } );
        this.hello.push( () => { this.greet(this.planet_3); } );
        this.hello.push( () => { this.greet(this.planet_4); } );
        this.hello.push( () => { this.greet(this.planet_5); } );
    } 
    greet(a: string) : void { alert("Hello " + a); }
    greetRandomPlanet() : void { 
        this.hello [ Math.floor( 5 * Math.random() ) ] (); 
    } 
} 
new PlanetGreeter().greetRandomPlanet();

Encoding an image to base64 will make it about 30% bigger.

See the details in the wikipedia article about the Data URI scheme, where it states:

Base64-encoded data URIs are 1/3 larger in size than their binary equivalent. (However, this overhead is reduced to 2-3% if the HTTP server compresses the response using gzip)

• Axis2: More ubiquitous on the marketplace, supports more bindings, supports other languages like C/C++.
• CXF: Much easier to use, more Spring friendly, faster got support for some WS-* extensions.

Try this one with retina display

/* Smartphones (portrait and landscape) ----------- */
@media only screen 
and (min-device-width : 320px) 
and (max-device-width : 480px) {
/* Styles */
}

/* Smartphones (landscape) ----------- */
@media only screen 
and (min-width : 321px) {
/* Styles */
}

/* Smartphones (portrait) ----------- */
@media only screen 
and (max-width : 320px) {
/* Styles */
}

/* iPads (portrait and landscape) ----------- */
@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) {
/* Styles */
}

/* iPads (landscape) ----------- */
@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : landscape) {
/* Styles */
}

/* iPads (portrait) ----------- */
@media only screen 
and (min-device-width : 768px) 
and (max-device-width : 1024px) 
and (orientation : portrait) {
/* Styles */
}

/* Desktops and laptops ----------- */
@media only screen 
and (min-width : 1224px) {
/* Styles */
}

/* Large screens ----------- */
@media only screen 
and (min-width : 1824px) {
/* Styles */
}

/* iPhone 4 ----------- */
@media
only screen and (-webkit-min-device-pixel-ratio : 1.5),
only screen and (min-device-pixel-ratio : 1.5) {
/* Styles */
}

Update

/* Smartphones (portrait and landscape) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-width: 480px) {
  /* Styles */
}

/* Smartphones (landscape) ----------- */
@media only screen and (min-width: 321px) {
  /* Styles */
}

/* Smartphones (portrait) ----------- */
@media only screen and (max-width: 320px) {
  /* Styles */
}

/* iPads (portrait and landscape) ----------- */
@media only screen and (min-device-width: 768px) and (max-device-width: 1024px) {
  /* Styles */
}

/* iPads (landscape) ----------- */
@media only screen and (min-device-width: 768px) and (max-device-width: 1024px) and (orientation: landscape) {
  /* Styles */
}

/* iPads (portrait) ----------- */
@media only screen and (min-device-width: 768px) and (max-device-width: 1024px) and (orientation: portrait) {
  /* Styles */
}

/* iPad 3 (landscape) ----------- */
@media only screen and (min-device-width: 768px) and (max-device-width: 1024px) and (orientation: landscape) and (-webkit-min-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPad 3 (portrait) ----------- */
@media only screen and (min-device-width: 768px) and (max-device-width: 1024px) and (orientation: portrait) and (-webkit-min-device-pixel-ratio: 2) {
  /* Styles */
}

/* Desktops and laptops ----------- */
@media only screen and (min-width: 1224px) {
  /* Styles */
}

/* Large screens ----------- */
@media only screen and (min-width: 1824px) {
  /* Styles */
}

/* iPhone 4 (landscape) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-width: 480px) and (orientation: landscape) and (-webkit-min-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPhone 4 (portrait) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-width: 480px) and (orientation: portrait) and (-webkit-min-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPhone 5 (landscape) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-height: 568px) and (orientation: landscape) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPhone 5 (portrait) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-height: 568px) and (orientation: portrait) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPhone 6 (landscape) ----------- */
@media only screen and (min-device-width: 375px) and (max-device-height: 667px) and (orientation: landscape) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPhone 6 (portrait) ----------- */
@media only screen and (min-device-width: 375px) and (max-device-height: 667px) and (orientation: portrait) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPhone 6+ (landscape) ----------- */
@media only screen and (min-device-width: 414px) and (max-device-height: 736px) and (orientation: landscape) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* iPhone 6+ (portrait) ----------- */
@media only screen and (min-device-width: 414px) and (max-device-height: 736px) and (orientation: portrait) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* Samsung Galaxy S3 (landscape) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-height: 640px) and (orientation: landscape) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* Samsung Galaxy S3 (portrait) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-height: 640px) and (orientation: portrait) and (-webkit-device-pixel-ratio: 2) {
  /* Styles */
}

/* Samsung Galaxy S4 (landscape) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-height: 640px) and (orientation: landscape) and (-webkit-device-pixel-ratio: 3) {
  /* Styles */
}

/* Samsung Galaxy S4 (portrait) ----------- */
@media only screen and (min-device-width: 320px) and (max-device-height: 640px) and (orientation: portrait) and (-webkit-device-pixel-ratio: 3) {
  /* Styles */
}

/* Samsung Galaxy S5 (landscape) ----------- */
@media only screen and (min-device-width: 360px) and (max-device-height: 640px) and (orientation: landscape) and (-webkit-device-pixel-ratio: 3) {
  /* Styles */
}

/* Samsung Galaxy S5 (portrait) ----------- */
@media only screen and (min-device-width: 360px) and (max-device-height: 640px) and (orientation: portrait) and (-webkit-device-pixel-ratio: 3) {
  /* Styles */
}

I've solved it, it can be done executing:

netsh interface portproxy add v4tov4 listenport=4422 listenaddress=192.168.1.111 connectport=80 connectaddress=192.168.0.33

To remove forwarding:

netsh interface portproxy delete v4tov4 listenport=4422 listenaddress=192.168.1.111

Official docs

The primary goal of a hashmap is to store a data set and provide near constant time lookups on it using a unique key. There are two common styles of hashmap implementation:

• Separate chaining: one with an array of buckets (linked lists)
• Open addressing: a single array allocated with extra space so index collisions may be resolved by placing the entry in an adjacent slot.

Separate chaining is preferable if the hashmap may have a poor hash function, it is not desirable to pre-allocate storage for potentially unused slots, or entries may have variable size. This type of hashmap may continue to function relatively efficiently even when the load factor exceeds 1.0. Obviously, there is extra memory required in each entry to store linked list pointers.

Hashmaps using open addressing have potential performance advantages when the load factor is kept below a certain threshold (generally about 0.7) and a reasonably good hash function is used. This is because they avoid potential cache misses and many small memory allocations associated with a linked list, and perform all operations in a contiguous, pre-allocated array. Iteration through all elements is also cheaper. The catch is hashmaps using open addressing must be reallocated to a larger size and rehashed to maintain an ideal load factor, or they face a significant performance penalty. It is impossible for their load factor to exceed 1.0.

Some key performance metrics to evaluate when creating a hashmap would include:

• Maximum load factor
• Average collision count on insertion
• Distribution of collisions: uneven distribution (clustering) could indicate a poor hash function.
• Relative time for various operations: put, get, remove of existing and non-existing entries.

Here is a flexible hashmap implementation I made. I used open addressing and linear probing for collision resolution.

https://github.com/DavidLeeds/hashmap

UTF-8 is prepared for world domination, Latin1 isn't.

If you're trying to store non-Latin characters like Chinese, Japanese, Hebrew, Russian, etc using Latin1 encoding, then they will end up as mojibake. You may find the introductory text of this article useful (and even more if you know a bit Java).

Note that full 4-byte UTF-8 support was only introduced in MySQL 5.5. Before that version, it only goes up to 3 bytes per character, not 4 bytes per character. So, it supported only the BMP plane and not e.g. the Emoji plane. If you want full 4-byte UTF-8 support, upgrade MySQL to at least 5.5 or go for another RDBMS like PostgreSQL. In MySQL 5.5+ it's called utf8mb4.

You can use one of the following technique to remove the last comma(,)

Solution1:

$string = "'name', 'name2', 'name3',";  // this is the full string or text.
$string = chop($string,",");            // remove the last character (,) and store the updated value in $string variable.
echo $string;                           // to print update string.

Solution 2:

$string = '10,20,30,';              // this is the full string or text.
$string = rtrim($string,',');
echo $string;                       // to print update string.

Solution 3:

 $string = "'name', 'name2', 'name3',";  // this is the full string or text.
 $string = substr($string , 0, -1);
 echo $string;  

Use DATE() function:

select * from follow_queue group by DATE(follow_date)

You can modify your REST project, so as to produce the needed static documents (html, pdf etc) upon building the project.

If you have a Java Maven project you can use the pom snippet below. It uses a series of plugins to generate a pdf and an html documentation (of the project's REST resources).

1. rest-api -> swagger.json : swagger-maven-plugin
2. swagger.json -> Asciidoc : swagger2markup-maven-plugin
3. Asciidoc -> PDF : asciidoctor-maven-plugin

Please be aware that the order of execution matters, since the output of one plugin, becomes the input to the next:

<plugin>
    <groupId>com.github.kongchen</groupId>
    <artifactId>swagger-maven-plugin</artifactId>
    <version>3.1.3</version>
    <configuration>
        <apiSources>
            <apiSource>
                <springmvc>false</springmvc>
                <locations>some.package</locations>
                <basePath>/api</basePath>
                <info>
                    <title>Put your REST service's name here</title>
                    <description>Add some description</description>
                    <version>v1</version>
                </info>
                <swaggerDirectory>${project.build.directory}/api</swaggerDirectory>
                <attachSwaggerArtifact>true</attachSwaggerArtifact>
            </apiSource>
        </apiSources>
    </configuration>
    <executions>
        <execution>
            <phase>${phase.generate-documentation}</phase>
            <!-- fx process-classes phase -->
            <goals>
                <goal>generate</goal>
            </goals>
        </execution>
    </executions>
</plugin>
<plugin>
    <groupId>io.github.robwin</groupId>
    <artifactId>swagger2markup-maven-plugin</artifactId>
    <version>0.9.3</version>
    <configuration>
        <inputDirectory>${project.build.directory}/api</inputDirectory>
        <outputDirectory>${generated.asciidoc.directory}</outputDirectory>
        <!-- specify location to place asciidoc files -->
        <markupLanguage>asciidoc</markupLanguage>
    </configuration>
    <executions>
        <execution>
            <phase>${phase.generate-documentation}</phase>
            <goals>
                <goal>process-swagger</goal>
            </goals>
        </execution>
    </executions>
</plugin>
<plugin>
    <groupId>org.asciidoctor</groupId>
    <artifactId>asciidoctor-maven-plugin</artifactId>
    <version>1.5.3</version>
    <dependencies>
        <dependency>
            <groupId>org.asciidoctor</groupId>
            <artifactId>asciidoctorj-pdf</artifactId>
            <version>1.5.0-alpha.11</version>
        </dependency>
        <dependency>
            <groupId>org.jruby</groupId>
            <artifactId>jruby-complete</artifactId>
            <version>1.7.21</version>
        </dependency>
    </dependencies>
    <configuration>
        <sourceDirectory>${asciidoctor.input.directory}</sourceDirectory>
        <!-- You will need to create an .adoc file. This is the input to this plugin -->
        <sourceDocumentName>swagger.adoc</sourceDocumentName>
        <attributes>
            <doctype>book</doctype>
            <toc>left</toc>
            <toclevels>2</toclevels>
            <generated>${generated.asciidoc.directory}</generated>
            <!-- this path is referenced in swagger.adoc file. The given file will simply 
                point to the previously create adoc files/assemble them. -->
        </attributes>
    </configuration>
    <executions>
        <execution>
            <id>asciidoc-to-html</id>
            <phase>${phase.generate-documentation}</phase>
            <goals>
                <goal>process-asciidoc</goal>
            </goals>
            <configuration>
                <backend>html5</backend>
                <outputDirectory>${generated.html.directory}</outputDirectory>
                <!-- specify location to place html file -->
            </configuration>
        </execution>
        <execution>
            <id>asciidoc-to-pdf</id>
            <phase>${phase.generate-documentation}</phase>
            <goals>
                <goal>process-asciidoc</goal>
            </goals>
            <configuration>
                <backend>pdf</backend>
                <outputDirectory>${generated.pdf.directory}</outputDirectory>
                <!-- specify location to place pdf file -->
            </configuration>
        </execution>
    </executions>
</plugin>

The asciidoctor plugin assumes the existence of an .adoc file to work on. You can create one that simply collects the ones that were created by the swagger2markup plugin:

include::{generated}/overview.adoc[]
include::{generated}/paths.adoc[]
include::{generated}/definitions.adoc[]

If you want your generated html document to become part of your war file you have to make sure that it is present on the top level - static files in the WEB-INF folder will not be served. You can do this in the maven-war-plugin:

<plugin>
    <artifactId>maven-war-plugin</artifactId>
    <configuration>
        <warSourceDirectory>WebContent</warSourceDirectory>
        <failOnMissingWebXml>false</failOnMissingWebXml>
        <webResources>
            <resource>
                <directory>${generated.html.directory}</directory>
            <!-- Add swagger.pdf to WAR file, so as to make it available as static content. -->
            </resource>
            <resource>
                <directory>${generated.pdf.directory}</directory>
            <!-- Add swagger.html to WAR file, so as to make it available as static content. -->
            </resource>
        </webResources>
    </configuration>
</plugin>

The war plugin works on the generated documentation - as such, you must make sure that those plugins have been executed in an earlier phase.

For CentOS:

yum install python-imaging

more_itertools.is_sorted

I'm not sure when this was added, but this hasn't been mentioned yet:

import more_itertools

ls = [1, 4, 2]

print(more_itertools.is_sorted(ls))

ls2 = ["ab", "c", "def"]

print(more_itertools.is_sorted(ls2, key=len))

a very simple solution would be, and I see you have said that you would like to see the simplest solution possible. A prompt for the user to continue after halting a loop Etc.

raw_input("Press<enter> to continue")

im using CentOS 5.5 and for me it was SElinux messing with it, i forgot to check that out. you can temporary disable it by doing as root

echo 0 > /selinux/enforce

hope it help someone

The json is kind of odd, it's like the students are properties of the "GetQuestion" object, it should be easy to be a List.....

About the libraries you could use are.

• JavaScriptSerializer
• NewtonSoft.Json
• SimpleJson ...

And there could be many more, but that are what I've used

About the json I don't now maybe something like this

public class GetQuestions
{
    public List<Student> Questions { get; set; }
}

public class Student
{
    public string Code { get; set; }
    public string Questions { get; set; }
}

void Main()
{
    var gq = new GetQuestions
    {
        Questions = new List<Student>
        {
            new Student {Code = "s1", Questions = "Q1,Q2"},
            new Student {Code = "s2", Questions = "Q1,Q2,Q3"},
            new Student {Code = "s3", Questions = "Q1,Q2,Q4"},
            new Student {Code = "s4", Questions = "Q1,Q2,Q5"},
        }
    };

    //Using Newtonsoft.json. Dump is an extension method of [Linqpad][4]
    JsonConvert.SerializeObject(gq).Dump();
}

Linqpad

and the result is this

{
     "Questions":[
        {"Code":"s1","Questions":"Q1,Q2"},
        {"Code":"s2","Questions":"Q1,Q2,Q3"},
        {"Code":"s3","Questions":"Q1,Q2,Q4"},
        {"Code":"s4","Questions":"Q1,Q2,Q5"}
      ]
 }

Yes I know the json is different, but the json that you want with dictionary.

void Main()
{
    var f = new Foo
    {
        GetQuestions = new Dictionary<string, string>
                {
                    {"s1", "Q1,Q2"},
                    {"s2", "Q1,Q2,Q3"},
                    {"s3", "Q1,Q2,Q4"},
                    {"s4", "Q1,Q2,Q4,Q6"},
                }
    };

    JsonConvert.SerializeObject(f).Dump();
}

class Foo
{
    public Dictionary<string, string> GetQuestions { get; set; }
}

And with Dictionary is as you want it.....

{
      "GetQuestions":
       {
              "s1":"Q1,Q2",
              "s2":"Q1,Q2,Q3",
              "s3":"Q1,Q2,Q4",
              "s4":"Q1,Q2,Q4,Q6"
       }
 }

Take a look at Enumerable#each_slice:

foo.each_slice(3).to_a
#=> [["1", "2", "3"], ["4", "5", "6"], ["7", "8", "9"], ["10"]]

mvc:annotation-driven is a tag added in Spring 3.0 which does the following:

1. Configures the Spring 3 Type ConversionService (alternative to PropertyEditors)
2. Adds support for formatting Number fields with @NumberFormat
3. Adds support for formatting Date, Calendar, and Joda Time fields with @DateTimeFormat, if Joda Time is on the classpath
4. Adds support for validating @Controller inputs with @Valid, if a JSR-303 Provider is on the classpath
5. Adds support for support for reading and writing XML, if JAXB is on the classpath (HTTP message conversion with @RequestBody/@ResponseBody)
6. Adds support for reading and writing JSON, if Jackson is o n the classpath (along the same lines as #5)

context:annotation-config Looks for annotations on beans in the same application context it is defined and declares support for all the general annotations like @Autowired, @Resource, @Required, @PostConstruct etc etc.

It is very important to understand both sessionStorage and localStorage as they both have different uses:

From MDN:

All of your web storage data is contained within two object-like structures inside the browser: sessionStorage and localStorage. The first one persists data for as long as the browser is open (the data is lost when the browser is closed) and the second one persists data even after the browser is closed and then opened again.

sessionStorage - Saves data until the browser is closed, the data is deleted when the tab/browser is closed.

localStorage - Saves data "forever" even after the browser is closed BUT you shouldn't count on the data you store to be there later, the data might get deleted by the browser at any time because of pretty much anything, or deleted by the user, best practice would be to validate that the data is there first, and continue the rest if it is there. (or set it up again if its not there)

To understand more, read here: localStorage | sessionStorage

This should do the trick:

models.DateTimeField(_("Date"), auto_now_add = True)

Time flies, the way I do without enabling less secured app is making a password for specific app

Step one: enable 2FA

• https://myaccount.google.com/signinoptions/two-step-verification/enroll-welcome

Step two: create an app-specific password

• https://myaccount.google.com/apppasswords

After this, put the sixteen digits password to the settings and reload the app, enjoy!

  config.action_mailer.smtp_settings = {
    ...
    password: 'HERE', # <---
    authentication: 'plain',
    enable_starttls_auto: true
  }

You can access the $_SERVER['DOCUMENT_ROOT'] variable :

<?php 
   $path = $_SERVER['DOCUMENT_ROOT'];
   $path .= "/subdir1/yourdocument.txt";
?>

Here is the code to clean file name in python.

import unicodedata

def clean_name(name, replace_space_with=None):
    """
    Remove invalid file name chars from the specified name

    :param name: the file name
    :param replace_space_with: if not none replace space with this string
    :return: a valid name for Win/Mac/Linux
    """

    # ref: https://en.wikipedia.org/wiki/Filename
    # ref: https://stackoverflow.com/questions/4814040/allowed-characters-in-filename
    # No control chars, no: /, \, ?, %, *, :, |, ", <, >

    # remove control chars
    name = ''.join(ch for ch in name if unicodedata.category(ch)[0] != 'C')

    cleaned_name = re.sub(r'[/\\?%*:|"<>]', '', name)
    if replace_space_with is not None:
        return cleaned_name.replace(' ', replace_space_with)
    return cleaned_name

No. If such a feature existed it would be listed in this syntax illustration. (Although it's possible there is an undocumented SQL feature, or maybe there is some package that I'm not aware of.)

public static boolean istPalindrom(char[] word){
int i1 = 0;
int i2 = word.length - 1;
while (i2 > i1) {
    if (word[i1] != word[i2]) {
        return false;
    }
    ++i1;
    --i2;
}
return true;
}

Apache Commons collection classes is the solution.

    MultiMap multiMapDemo = new MultiValueMap();

    multiMapDemo .put("fruit", "Mango");
    multiMapDemo .put("fruit", "Orange");
    multiMapDemo.put("fruit", "Blueberry");

    System.out.println(multiMap.get("fruit"));
   // Mango Orange Blueberry

Maven Dependency

    <!-- https://mvnrepository.com/artifact/org.apache.commons/commons-collections4 -- 
     >
     <dependency>
         <groupId>org.apache.commons</groupId>
         <artifactId>commons-collections4</artifactId>
         <version>4.4</version>
    </dependency>

The solution below works in Firefox also, without any JavaScript:

option[default] {_x000D_
  display: none;_x000D_
}

<select>_x000D_
  <option value="" default selected>Select Your Age</option>_x000D_
  <option value="1">1</option>_x000D_
  <option value="2">2</option>_x000D_
  <option value="3">3</option>_x000D_
  <option value="4">4</option>_x000D_
</select>

Basically I use Fiddler or Postman for testing API's.

In fiddler, in request header you need to specify instead of xml, html you need to change it to json. Eg: Accept: application/json. That should do the job.

i founded a great toool to auto parse and connect to web services

http://www.wsdl2code.com

http://www.wsdl2code.com/pages/Example.aspx

 SampleService srv1 = new SampleService();
     req = new Request();                     
     req.companyId = "1";
     req.userName = "userName";                                     
     req.password = "pas";
     Response response =    srv1.ServiceSample(req);

My requirement was for PRISM-MVVM based solution where a TreeView was needed and the bound object is of type Collection<> and hence needs HierarchicalDataTemplate. The default BindableSelectedItemBehavior wont be able to identify the child TreeViewItem. To make it to work in this scenario.

public class BindableSelectedItemBehavior : Behavior<TreeView>
{
    #region SelectedItem Property

    public object SelectedItem
    {
        get { return (object)GetValue(SelectedItemProperty); }
        set { SetValue(SelectedItemProperty, value); }
    }

    public static readonly DependencyProperty SelectedItemProperty =
        DependencyProperty.Register("SelectedItem", typeof(object), typeof(BindableSelectedItemBehavior), new UIPropertyMetadata(null, OnSelectedItemChanged));

    private static void OnSelectedItemChanged(DependencyObject sender, DependencyPropertyChangedEventArgs e)
    {
        var behavior = sender as BindableSelectedItemBehavior;
        if (behavior == null) return;
        var tree = behavior.AssociatedObject;
        if (tree == null) return;
        if (e.NewValue == null)
            foreach (var item in tree.Items.OfType<TreeViewItem>())
                item.SetValue(TreeViewItem.IsSelectedProperty, false);
        var treeViewItem = e.NewValue as TreeViewItem;
        if (treeViewItem != null)
            treeViewItem.SetValue(TreeViewItem.IsSelectedProperty, true);
        else
        {
            var itemsHostProperty = tree.GetType().GetProperty("ItemsHost", System.Reflection.BindingFlags.NonPublic | System.Reflection.BindingFlags.Instance);
            if (itemsHostProperty == null) return;
            var itemsHost = itemsHostProperty.GetValue(tree, null) as Panel;
            if (itemsHost == null) return;
            foreach (var item in itemsHost.Children.OfType<TreeViewItem>())
            {
                if (WalkTreeViewItem(item, e.NewValue)) 
                    break;
            }
        }
    }

    public static bool WalkTreeViewItem(TreeViewItem treeViewItem, object selectedValue)
    {
        if (treeViewItem.DataContext == selectedValue)
        {
            treeViewItem.SetValue(TreeViewItem.IsSelectedProperty, true);
            treeViewItem.Focus();
            return true;
        }
        var itemsHostProperty = treeViewItem.GetType().GetProperty("ItemsHost", System.Reflection.BindingFlags.NonPublic | System.Reflection.BindingFlags.Instance);
        if (itemsHostProperty == null) return false;
        var itemsHost = itemsHostProperty.GetValue(treeViewItem, null) as Panel;
        if (itemsHost == null) return false;
        foreach (var item in itemsHost.Children.OfType<TreeViewItem>())
        {
            if (WalkTreeViewItem(item, selectedValue))
                break;
        }
        return false;
    }
    #endregion

    protected override void OnAttached()
    {
        base.OnAttached();
        this.AssociatedObject.SelectedItemChanged += OnTreeViewSelectedItemChanged;
    }

    protected override void OnDetaching()
    {
        base.OnDetaching();
        if (this.AssociatedObject != null)
        {
            this.AssociatedObject.SelectedItemChanged -= OnTreeViewSelectedItemChanged;
        }
    }

    private void OnTreeViewSelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e)
    {
        this.SelectedItem = e.NewValue;
    }
}

This enables to iterate through all the elements irrespective of the level.

If you're getting source in Content Use the following method

try
{
    var response = restClient.Execute<List<EmpModel>>(restRequest);

    var jsonContent = response.Content;

    var data = JsonConvert.DeserializeObject<List<EmpModel>>(jsonContent);

    foreach (EmpModel item in data)
    {
        listPassingData?.Add(item);
    }
}
catch (Exception ex)
{
    Console.WriteLine($"Data get mathod problem {ex} ");
}

You need to use double apostrophe instead of single in the "You''re", eg:

String text = java.text.MessageFormat.format("You''re about to delete {0} rows.", 5);
System.out.println(text);

One way that I see more powerful and avoid having a isDefault in all the models is by using the ng-attributes ng-model, ng-value and ng-checked.

ng-model: binds the value to your model.

ng-value: the value to pass to the ng-model binding.

ng-checked: value or expression that is evaluated. Useful for radio-button and check-boxes.

Example of use: In the following example, I have my model and a list of languages that my site supports. To display the different languages supported and updating the model with the selecting language we can do it in this way.

<!-- Radio -->
<div ng-repeat="language in languages">

  <div>
    <label>

      <input ng-model="site.lang"
             ng-value="language"
             ng-checked="(site.lang == language)"
             name="localizationOptions"
             type="radio">

      <span> {{language}} </span>

    </label>
  </div>

</div>
<!-- end of Radio -->

Our model site.lang will get a language value whenever the expression under evaluation (site.lang == language) is true. This will allow you to sync it with server easily since your model already has the change.

You can call up the color picker from any Cocoa application (TextEdit, Mail, Keynote, Pages, etc.) by hitting Shift-Command-C

The following article explains more about using Mac OS's Color Picker.

http://www.macworld.com/article/46746/2005/09/colorpickersecrets.html

<html>
    <body>
        <a href="#" onclick="DoEdit('Preliminary Assessment &quot;Mini&quot;'); return false;">edit</a>
    </body>
</html>

Should do the trick.

Found a good explanation with solutions: https://vcfvct.wordpress.com/2016/12/15/spring-nested-transactional-rollback-only/

1) remove the @Transacional from the nested method if it does not really require transaction control. So even it has exception, it just bubbles up and does not affect transactional stuff.

OR:

2) if nested method does need transaction control, make it as REQUIRE_NEW for the propagation policy that way even if throws exception and marked as rollback only, the caller will not be affected.

Unsigned variables can only be positive numbers, because they lack the ability to indicate that they are negative.

This ability is called the 'sign' or 'signing bit'.

A side effect is that without a signing bit, they have one more bit that can be used to represent the number, doubling the maximum number it can represent.

In Java doc of Var-Args it is quite clear the usage of var args:

http://docs.oracle.com/javase/1.5.0/docs/guide/language/varargs.html

about usage it says:

"So when should you use varargs? As a client, you should take advantage of them whenever the API offers them. Important uses in core APIs include reflection, message formatting, and the new printf facility. As an API designer, you should use them sparingly, only when the benefit is truly compelling. Generally speaking, you should not overload a varargs method, or it will be difficult for programmers to figure out which overloading gets called. "

The following approach was inspired by this answer to a related (more general) question.

The approach is to read the MachineGuid value in registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography. This value is generated during OS installation.

There are few ways around the uniqueness of the Hardware-ID per machine using this approach. One method is editing the registry value, but this would cause complications on the user's machine afterwards. Another method is to clone a drive image which would copy the MachineGuid value.

However, no approach is hack-proof and this will certainly be good enough for normal users. On the plus side, this approach is quick performance-wise and simple to implement.

public string GetMachineGuid()
{
   string location = @"SOFTWARE\Microsoft\Cryptography";
   string name = "MachineGuid";

   using (RegistryKey localMachineX64View = 
       RegistryKey.OpenBaseKey(RegistryHive.LocalMachine, RegistryView.Registry64))
   {
       using (RegistryKey rk = localMachineX64View.OpenSubKey(location))
       {
           if (rk == null)
               throw new KeyNotFoundException(
                   string.Format("Key Not Found: {0}", location));

           object machineGuid = rk.GetValue(name);
           if (machineGuid == null)
               throw new IndexOutOfRangeException(
                   string.Format("Index Not Found: {0}", name));

           return machineGuid.ToString();
       }
   }
}

Try this (subquery):

SELECT * FROM terms WHERE id IN 
   (SELECT term_id FROM terms_relation WHERE taxonomy = "categ")

Or you can try this (JOIN):

SELECT t.* FROM terms AS t 
   INNER JOIN terms_relation AS tr 
   ON t.id = tr.term_id AND tr.taxonomy = "categ"

If you want to receive all fields from two tables:

SELECT t.id, t.name, t.slug, tr.description, tr.created_at, tr.updated_at 
  FROM terms AS t 
   INNER JOIN terms_relation AS tr 
   ON t.id = tr.term_id AND tr.taxonomy = "categ"

In current version of Jekyll, it defaults to http://127.0.0.1:4000/.
This is good, if you are connected to a network but do not want anyone else to access your application.

However it may happen that you want to see how your application runs on a mobile or from some other laptop/computer.

In that case, you can use

jekyll serve --host 0.0.0.0

This binds your application to the host & next use following to connect to it from some other host

http://host's IP adress/4000 

Fast way to upgrade ruby to v2.4+

brew upgrade ruby

or

sudo gem update --system 

You could install pandas and use pandas.read_fwf for fixed width format files. Example using /proc/net/arp:

In [230]: df = pandas.read_fwf("/proc/net/arp")

In [231]: print(df)
       IP address HW type Flags         HW address Mask Device
0   141.38.28.115     0x1   0x2  84:2b:2b:ad:e1:f4    *   eth0
1   141.38.28.203     0x1   0x2  c4:34:6b:5b:e4:7d    *   eth0
2   141.38.28.140     0x1   0x2  00:19:99:ce:00:19    *   eth0
3   141.38.28.202     0x1   0x2  90:1b:0e:14:a1:e3    *   eth0
4    141.38.28.17     0x1   0x2  90:1b:0e:1a:4b:41    *   eth0
5    141.38.28.60     0x1   0x2  00:19:99:cc:aa:58    *   eth0
6   141.38.28.233     0x1   0x2  90:1b:0e:8d:7a:c9    *   eth0
7    141.38.28.55     0x1   0x2  00:19:99:cc:ab:00    *   eth0
8   141.38.28.224     0x1   0x2  90:1b:0e:8d:7a:e2    *   eth0
9   141.38.28.148     0x1   0x0  4c:52:62:a8:08:2c    *   eth0
10  141.38.28.179     0x1   0x2  90:1b:0e:1a:4b:50    *   eth0

In [232]: df["HW address"]
Out[232]:
0     84:2b:2b:ad:e1:f4
1     c4:34:6b:5b:e4:7d
2     00:19:99:ce:00:19
3     90:1b:0e:14:a1:e3
4     90:1b:0e:1a:4b:41
5     00:19:99:cc:aa:58
6     90:1b:0e:8d:7a:c9
7     00:19:99:cc:ab:00
8     90:1b:0e:8d:7a:e2
9     4c:52:62:a8:08:2c
10    90:1b:0e:1a:4b:50

In [233]: df["HW address"][5]
Out[233]: '00:19:99:cc:aa:58'

By default it tries to figure out the format automagically, but there are options you can give for more explicit instructions (see documentation). There are also other IO routines in pandas that are powerful for other file formats.

You can delete the archive files and executable binaries that go install (or go get) produces for a package with go clean -i importpath.... These normally reside under $GOPATH/pkg and $GOPATH/bin, respectively.

Be sure to include ... on the importpath, since it appears that, if a package includes an executable, go clean -i will only remove that and not archive files for subpackages, like gore/gocode in the example below.

Source code then needs to be removed manually from $GOPATH/src.

go clean has an -n flag for a dry run that prints what will be run without executing it, so you can be certain (see go help clean). It also has a tempting -r flag to recursively clean dependencies, which you probably don't want to actually use since you'll see from a dry run that it will delete lots of standard library archive files!

A complete example, which you could base a script on if you like:

$ go get -u github.com/motemen/gore

$ which gore
/Users/ches/src/go/bin/gore

$ go clean -i -n github.com/motemen/gore...
cd /Users/ches/src/go/src/github.com/motemen/gore
rm -f gore gore.exe gore.test gore.test.exe commands commands.exe commands_test commands_test.exe complete complete.exe complete_test complete_test.exe debug debug.exe helpers_test helpers_test.exe liner liner.exe log log.exe main main.exe node node.exe node_test node_test.exe quickfix quickfix.exe session_test session_test.exe terminal_unix terminal_unix.exe terminal_windows terminal_windows.exe utils utils.exe
rm -f /Users/ches/src/go/bin/gore
cd /Users/ches/src/go/src/github.com/motemen/gore/gocode
rm -f gocode.test gocode.test.exe
rm -f /Users/ches/src/go/pkg/darwin_amd64/github.com/motemen/gore/gocode.a

$ go clean -i github.com/motemen/gore...

$ which gore

$ tree $GOPATH/pkg/darwin_amd64/github.com/motemen/gore
/Users/ches/src/go/pkg/darwin_amd64/github.com/motemen/gore

0 directories, 0 files

# If that empty directory really bugs you...
$ rmdir $GOPATH/pkg/darwin_amd64/github.com/motemen/gore

$ rm -rf $GOPATH/src/github.com/motemen/gore

Note that this information is based on the go tool in Go version 1.5.1.

Try this

typeof(IFoo).IsAssignableFrom(typeof(BarClass));

This will tell you whether BarClass(Derived) implements IFoo(SomeType) or not

The text at the navigation bar is normally colored by using one of the two following css classes in the bootstrap.css file.

Firstly, in case of using a default navigation bar (the gray one), the .navbar-default class will be used and the text is colored as dark gray.

.navbar-default .navbar-text {
  color: #777;
}

The other is in case of using an inverse navigation bar (the black one), the text is colored as gray60.

.navbar-inverse .navbar-text {
  color: #999;
}

So, you can change its color as you wish. However, I would recommend you to use a separate css file to change it.

NOTE: you could also use the customizer provided by Twitter Bootstrap, in the Navbar section.

Security Warning: This class is not secure. It's using Rijndael256-ECB, which is not semantically secure. Just because "it works" doesn't mean "it's secure". Also, it strips tailing spaces afterwards due to not using proper padding.

Found this class recently, it works like a dream!

class Encryption {
    var $skey = "yourSecretKey"; // you can change it

    public  function safe_b64encode($string) {
        $data = base64_encode($string);
        $data = str_replace(array('+','/','='),array('-','_',''),$data);
        return $data;
    }

    public function safe_b64decode($string) {
        $data = str_replace(array('-','_'),array('+','/'),$string);
        $mod4 = strlen($data) % 4;
        if ($mod4) {
            $data .= substr('====', $mod4);
        }
        return base64_decode($data);
    }

    public  function encode($value){ 
        if(!$value){return false;}
        $text = $value;
        $iv_size = mcrypt_get_iv_size(MCRYPT_RIJNDAEL_256, MCRYPT_MODE_ECB);
        $iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);
        $crypttext = mcrypt_encrypt(MCRYPT_RIJNDAEL_256, $this->skey, $text, MCRYPT_MODE_ECB, $iv);
        return trim($this->safe_b64encode($crypttext)); 
    }

    public function decode($value){
        if(!$value){return false;}
        $crypttext = $this->safe_b64decode($value); 
        $iv_size = mcrypt_get_iv_size(MCRYPT_RIJNDAEL_256, MCRYPT_MODE_ECB);
        $iv = mcrypt_create_iv($iv_size, MCRYPT_RAND);
        $decrypttext = mcrypt_decrypt(MCRYPT_RIJNDAEL_256, $this->skey, $crypttext, MCRYPT_MODE_ECB, $iv);
        return trim($decrypttext);
    }
}

And to call it:

$str = "My secret String";

$converter = new Encryption;
$encoded = $converter->encode($str );
$decoded = $converter->decode($encoded);    

echo "$encoded<p>$decoded";

I'd create a shell script to install mcrypt module for PHP 5.3 without homebrew.

The scripts install php autoconf if needed and compile module for your php version.

The link is here: https://gist.github.com/lucasgameiro/8730619

Thanks

try this:

Use ´return false´ for to cut the flow of the event:

$('#login_form').submit(function() {
    var data = $("#login_form :input").serializeArray();
    alert('Handler for .submit() called.');
    return false;  // <- cancel event
});

Edit

corroborate if the form element with the 'length' of jQuery:

alert($('#login_form').length) // if is == 0, not found form
$('#login_form').submit(function() {
    var data = $("#login_form :input").serializeArray();
    alert('Handler for .submit() called.');
    return false;  // <- cancel event
});

OR:

it waits for the DOM is ready:

jQuery(function() {

    alert($('#login_form').length) // if is == 0, not found form
    $('#login_form').submit(function() {
        var data = $("#login_form :input").serializeArray();
        alert('Handler for .submit() called.');
        return false;  // <- cancel event
    });

});

Do you put your code inside the event "ready" the document or after the DOM is ready?

Make sure not to miss the explanation of :host-context which is directly above ::ng-deep in the angular guide : https://angular.io/guide/component-styles. I missed it up until now and wish I'd seen it sooner.

::ng-deep is often necessary when you didn't write the component and don't have access to its source, but :host-context can be a very useful option when you do.

For example I have a black <h1> header inside a component I designed, and I want the ability to change it to white when it's displayed on a dark themed background.

If I didn't have access to the source I may have to do this in the css for the parent:

.theme-dark widget-box ::ng-deep h1 { color: white; }

But instead with :host-context you can do this inside the component.

 h1 
 {
     color: black;       // default color

     :host-context(.theme-dark) &
     {
         color: white;   // color for dark-theme
     }

     // OR set an attribute 'outside' with [attr.theme]="'dark'"

     :host-context([theme='dark']) &
     {
         color: white;   // color for dark-theme
     }
 }

This will look anywhere in the component chain for .theme-dark and apply the css to the h1 if found. This is a good alternative to relying too much on ::ng-deep which while often necessary is somewhat of an anti-pattern.

In this case the & is replaced by the h1 (that's how sass/scss works) so you can define your 'normal' and themed/alternative css right next to each other which is very handy.

Be careful to get the correct number of :. For ::ng-deep there are two and for :host-context only one.

awk '{$1=$2=$3=""}1' file

NB: this method will leave "blanks" in 1,2,3 fields but not a problem if you just want to look at output.

Ctrl+C is what you need. If it didn't work, hit it harder. :-) Of course, you can also just close the shell window.

Edit: You didn't mention the circumstances. As a last resort, you could write a batch file that contains taskkill /im python.exe, and put it on your desktop, Start menu, etc. and run it when you need to kill a runaway script. Of course, it will kill all Python processes, so be careful.

Probably part of Open Graph Protocol for Facebook.

Edit: guess not only Facebook - that's only one example of using it.

Creating new function on your object literal and invoking a constructor seems a radical departure from the original problem, and it's unnecessary.

You cannot reference a sibling property during object literal initialization.

var x = { a: 1, b: 2, c: a + b } // not defined 
var y = { a: 1, b: 2, c: y.a + y.b } // not defined 

The simplest solution for computed properties follows (no heap, no functions, no constructor):

var x = { a: 1, b: 2 };

x.c = x.a + x.b; // apply computed property

For me:

It was Eclipse v4.5 (Mars) which did not support Java SE 7, so I added Java SE 8. It worked.

The simplest way: run git push -u origin feature/123-sandbox-tests once. That pushes the branch the way you're used to doing it and also sets the upstream tracking info in your local config. After that, you can just git push to push tracked branches to their upstream remote(s).

You can also do this in the config yourself by setting branch.<branch name>.merge to the remote branch name (in your case the same as the local name) and optionally, branch.<branch name>.remote to the name of the remote you want to push to (defaults to origin). If you look in your config, there's most likely already one of these set for master, so you can follow that example.

Finally, make sure you consider the push.default setting. It defaults to "matching", which can have undesired and unexpected results. Most people I know find "upstream" more intuitive, which pushes only the current branch.

Details on each of these settings can be found in the git-config man page.

On second thought, on re-reading your question, I think you know all this. I think what you're actually looking for doesn't exist. How about a bash function something like (untested):

function pushCurrent {
  git config push.default upstream
  git push
  git config push.default matching
}

You should set body and html to position:fixed;, and then set right:, left:, top:, and bottom: to 0;. That way, even if content overflows it will not extend past the limits of the viewport.

For example:

<html>
<body>
    <div id="wrapper"></div>
</body>
</html>

CSS:

html, body, {
    position:fixed;
    top:0;
    bottom:0;
    left:0;
    right:0;
}

JS Fiddle Example

Caveat: Using this method, if the user makes their window smaller, content will be cut off.

There is a null coalescing operator (??), but it would not handle empty strings.

If you were only interested in dealing with null strings, you would use it like

string output = somePossiblyNullString ?? "0";

For your need specifically, there is the conditional operator bool expr ? true_value : false_value that you can use to simplify if/else statement blocks that set or return a value.

string output = string.IsNullOrEmpty(someString) ? "0" : someString;

Always mention max-width and min-width in some unit like px or rem. This figured it out for me. If I write it without the unit and only the number value, browser can't read the media queries. example: this is wrong @media only screen and (max-width:950) and this is right @media only screen and (max-width:950px)

Check out MSDN...

CREATE SCHEMA: http://msdn.microsoft.com/en-us/library/ms189462.aspx

Then

ALTER SCHEMA: http://msdn.microsoft.com/en-us/library/ms173423.aspx

Or you can check it on on SO...

How do I move a table into a schema in T-SQL

This command should fix it.

docker run --rm -it -v ${PWD}:c:\data mirkohaaser/docker-clitools

{PWD} is the host current folder. after the : is the container folder. If the mounting is correct then files will be listed in the director c:\data in the container.

If you are looking for a functional approach:

var obj = {1: 11, 2: 22};
var arr = Object.keys(obj).map(function (key) { return obj[key]; });

Results in:

[11, 22]

The same with an ES6 arrow function:

Object.keys(obj).map(key => obj[key])

With ES7 you will be able to use Object.values instead (more information):

var arr = Object.values(obj);

Or if you are already using Underscore/Lo-Dash:

var arr = _.values(obj)

along with these two variants, there is also jade.renderFile which generates html that need not be passed to the client.

usage-

var jade = require('jade');

exports.getJson = getJson;

function getJson(req, res) {
    var html = jade.renderFile('views/test.jade', {some:'json'});
    res.send({message: 'i sent json'});
}

getJson() is available as a route in app.js.

You have to use parseInt() to convert

For eg.

  var z = parseInt(x) + parseInt(y);

use parseFloat() if you want to handle float value.

I think it is considered "more pythonic" to just use in when determining if a key already exists, as in

if start not in graph:
    return None

Try this way,hope this will help you to solve your problem.

main.xml

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:orientation="vertical"
    android:gravity="center">

    <WebView
        android:id="@+id/webView"
        android:layout_width="match_parent"
        android:layout_height="match_parent"/>
</LinearLayout>

MyActivity.java

public class MyActivity extends Activity {

    private WebView webView;
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.main);

        webView = (WebView) findViewById(R.id.webView);
        webView.loadData("<a href=\"tel:+1800229933\">Call us free!</a>", "text/html", "utf-8");
    }

}

Please add this permission in AndroidManifest.xml

<uses-permission android:name="android.permission.CALL_PHONE"/>

i had the same problem reinstalling anaconda solved the issue for me

Here's all the exception assertions you can do. Note that all of them are optional.

class ExceptionTest extends PHPUnit_Framework_TestCase
{
    public function testException()
    {
        // make your exception assertions
        $this->expectException(InvalidArgumentException::class);
        // if you use namespaces:
        // $this->expectException('\Namespace\MyExceptio??n');
        $this->expectExceptionMessage('message');
        $this->expectExceptionMessageRegExp('/essage$/');
        $this->expectExceptionCode(123);
        // code that throws an exception
        throw new InvalidArgumentException('message', 123);
   }

   public function testAnotherException()
   {
        // repeat as needed
        $this->expectException(Exception::class);
        throw new Exception('Oh no!');
    }
}

Documentation can be found here.